Article 11.The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in the are hereby suspended.2.Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in the Annex.

Article 21.The Commission may at any time review the suspensions for the products listed in the Annex in the following cases:(a)at its own initiative;(b)at the request of Member States.2.The Commission shall review the suspensions for products listed in the Annex during the year preceding the end date for mandatory review provided for in that Annex.

Article 3Where a declaration for release for free circulation is presented for the products in relation to which the supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in "Box 41: Supplementary units" of that declaration using the measurement unit set out in the Annex.

Article 4Regulation (EU) No 1344/2011 is hereby repealed.

Article 5This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 January 2014.

This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX

However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)Only the ad valorem duty is suspended. The specific duty shall continue to apply.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htmA newly introduced measure or a measure with amended conditions. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure.

Serial number	CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
0.6748	ex07095910	10	Fresh or chilled chanterelles for treatment other than simple repacking for retail sale	0 %	—	31.12.2025
0.3348	ex07102100	10	Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals	0 %	—	31.12.2023
0.3349	ex07108095	50	Bamboo shoots, frozen, not put up for retail sale	0 %	—	31.12.2023
0.2829	ex07115900	11	Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry	0 %	—	31.12.2021
0.2463	ex07123200ex07123300ex07123900	101031	Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale	0 %	—	31.12.2023
0.3347	ex08041000	30	Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries	0 %	—	31.12.2023
0.2411	0811905008119070		Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter	0 %	—	31.12.2023
0.2411	ex08119095	70		0 %	—	31.12.2023
0.3228	ex08119095	20	Boysenberries, frozen, not containing added sugar, not put up for retail sale	0 %	—	31.12.2023
0.2409	ex08119095	30	Pineapple (Ananas comosus), in pieces, frozen	0 %	—	31.12.2023
0.2408	ex08119095	40	Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter	0 %	—	31.12.2023
0.2864	ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930	202020202020	Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100,goods of heading 3401, orfatty acids with high purity of heading 2915	0 %	—	31.12.2021
0.6789	ex15121910	10	Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture ofconjugated linoleic acid of heading 3823 orethyl- or methyl esters of linoleic acid of heading 2916	0 %	—	31.12.2022
0.3341	ex15159099	92	Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid	0 %	—	31.12.2023
0.7686	15162010		Hydrogenated castor oil, so called 'opal-wax'	0 %	—	31.12.2023
0.4708	ex15162096	20	Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process	0 %	—	31.12.2024
0.4080	ex15179099	10	Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)	0 %	—	31.12.2021
0.6182	ex19019099ex21069098	3945	Preparation in powder form containing by weight:15 % or more but not more than 35 % of wheat derived Maltodextrin,15 % or more but not more than 35 % of whey (milk serum),10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,10 % or more but not more than 30 % of blended, aged spray dried cheese,5 % or more but not more than 15 % of buttermilk, and0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid	0 %	—	31.12.2023
0.2423	ex19023010ex19030000	1020	Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale	0 %	—	31.12.2023
0.2866	ex20059100	10	Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg	0 %	—	31.12.2023
0.5884	ex20079950ex20079950ex20079993	839310	Mango puree concentrate, obtained by cooking:of the Genus Mangifera spp.,with a sugar content by weight of not more than 30 %,for use in the manufacture of products of food and drink industry	6 %	—	31.12.2022
0.5875	ex20079950ex20079950	8494	Papaya puree concentrate, obtained by cooking:of the Genus Carica spp.,with a sugar content by weight of more than 13 % but not more than 30 %,for use in the manufacture of products of food and drink industry	7,8 %	—	31.12.2022
0.5867	ex20079950ex20079950	8595	Guava puree concentrate, obtained by cooking:of the Genus Psidium spp.,with a sugar content by weight of more than 13 % but not more than 30 %,for use in the manufacture of products of food and drink industry	6 %	—	31.12.2022
0.4716	ex20089391	20	Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries	0 %	—	31.12.2022
0.5004	ex20089948	94	Mango puree:not from concentrate,of the genus Mangifera,of a Brix value of 14 or more, but not more than 20,used in the manufacture of products of drink industry	6 %	—	31.12.2022
0.4709	ex20089949ex20089999	3040	Seedless boysenberry puree not containing added spirit, whether or not containing added sugar	0 %	—	31.12.2025
0.5587	ex20089949ex20089999	7011	Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:more than 6 % of salt concentration,0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate, andwhether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995,for use in the manufacture of stuffed vine leaves with rice	0 %	—	31.12.2022
0.6723	ex20089991	20	Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking	0 %	—	31.12.2025
0.7767	ex20089999	35	Frozen pulp from acai berries:hydrated and pasteurised,separated from the kernels by the addition of water,with a Brix value of less than 6, andwith a sugar content of less than 5,6 %	0 %	—	31.12.2024
0.4992	ex20094192ex20094199	2070	Pineapple juice:not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry	8 %	—	31.12.2025
0.4664	ex20094930	91	Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than EUR 30 per 100 kg net weight,containing added sugar,used in the manufacture of products of food or drink industry	0 %	—	31.12.2024
0.4623	ex20098131	10	Cranberry juice concentrate:of a Brix value of 40 or more but not more than 66,in immediate packings of a content of 50 litres or more	0 %	l	31.12.2024
0.6356	ex20098973ex20098973	1113	Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 13,7 or more but not more than 55,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwith added sugar,for the use in the manufacture of products of food or drink industry	0 %	l	31.12.2024
0.4159	ex20098979	20	Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more	0 %	l	31.12.2021
0.6050	ex20098979	30	Frozen acerola juice concentrate:with a Brix value of more than 48 but not more than 67,in immediate packings of a content of 50 litres or more	0 %	l	31.12.2023
0.5206	ex20098979	85	Acai berry juice concentrate:of the species Euterpe oleracea,frozen,not sweetened,not in powder form,of a Brix value of 23 or more but not more than 32,in immediate packings of a content of 10 kg or more	0 %	—	31.12.2021
0.6365	ex20098997ex20098997	2129	Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 10 or more but not more than 13,7,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwithout added sugar,for the use in the manufacture of products of food or drink industry	0 %	l	31.12.2024
0.4157	ex20098999	96	Coconut waterunfermented,not containing added spirit or sugar, andin immediate packing of a content of 20 litres or more	0 %	l	31.12.2021
0.6152	ex21061020	20	Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form	0 %	—	31.12.2023
0.3340	ex21061020	30	Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate	0 %	—	31.12.2023
0.5208	ex21069092	45	Preparation containing by weight:more than 30 % but not more than 35 % liquorice extract,more than 65 % but not more than 70 % tricaprylin,standardised by weight to 3 % or more but not more than 4 % glabridin	0 %	—	31.12.2021
0.7284	ex21069092	50	Casein protein hydrolysate consisting of:by weight 20 % or more but not more than 70 % free amino acids, andpeptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da	0 %	—	31.12.2022
0.7435	ex21069098	47	Preparation, having a moisture content of 1 % or more but not more than 4 %, and containing by weight:15 % or more but not more than 35 % of buttermilk,20 % (±10 %) of lactose,20 % (±10 %) of whey protein concentrate,15 % (±10 %) of cheddar cheese,3 % (±2 %) of salt,0,1 % or more but not more than 10 % of lactic acid E270,0,1 % or more but not more than 10 % of gum arabic E414,for use in the manufacture of products of food and drink industry	0 %	—	31.12.2022
0.5246	ex25199010	10	Fused magnesia with a purity by weight of 94 % or more	0 %	—	31.12.2021
0.6330	ex27075000ex27079980	2010	Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %	0 %	—	31.12.2024
0.6168	ex27079999	10	Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27	0 %	—	31.12.2023
0.8144	ex27101225	20	Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with:a specific gravity of 0,666 or more but not more than 0,686,a total of carbonyl compounds of less than 1 ppm,a total of acetylenic compounds of less than 2 ppm	0 %	—	31.12.2025
0.7823	ex27101981ex27101999	3050	Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,and with:a viscosity index of 80 or more, but less than 120, anda kinematic viscosity less than 5,0 cSt at 100 °C or more than 13,0 cSt at 100 °C	0 %	—	31.12.2023
0.7822	ex27101981ex27101999	4060	Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,with a viscosity index of 120 or more	0 %	—	31.12.2024
0.6495	ex27101999	20	Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:not more than 1 mg/kg of sulphur,more than 99 % by weight of saturated hydrocarbons,more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50, anda kinematic viscosity at 40 °C of more than 6,5 mm2/s, ora kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more	0 %	—	31.12.2024
0.7393	ex27129099	10	Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms	0 %	—	31.12.2022
0.4531	ex28045090	40	Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis	0 %	—	31.12.2023
0.6036	28047000		Phosphorus	0 %	—	31.12.2023
0.8021	28047010		Red phosphorus	0 %	—	31.12.2022
0.8022	28047090		Phosphorus, other than red phosphorus	0 %	—	31.12.2023
0.6658	ex28051200	10	Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)	0 %	—	31.12.2025
0.5609	ex28051990	20	Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more	0 %	—	31.12.2022
0.2559	ex28053010	10	Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium	0 %	—	31.12.2023
0.4979	280530202805303028053040		Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more	0 %	—	31.12.2025
0.7769	ex28092000	10	Aqueous solution of phosphoric acid (CAS RN 7664-38-2), containing by weight 85 % or more phosphoric acid	0 %	—	31.12.2024
0.3338	ex28111980	10	Sulphamidic acid (CAS RN 5329-14-6)	0 %	—	31.12.2023
0.5418	ex28111980	20	Hydrogen iodide (CAS RN 10034-85-2)	0 %	—	31.12.2021
0.2407	ex28112200	10	Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges	0 %	—	31.12.2023
0.6836	ex28112200	15	Amorphous silicon dioxide (CAS RN 60676-86-0)in the form of powderof a purity by weight of 99,0 % or morewith a median grain size of 0,7 μm or more, but not more than 2,1 μmwhere 70 % of the particles have a diameter of not more than 3 μm	0 %	—	31.12.2022
0.7292	ex28112990	10	Tellurium dioxide (CAS RN 7446-07-3)	0 %	—	31.12.2022
0.3308	ex28129000	10	Nitrogen trifluoride (CAS RN 7783-54-2)	0 %	—	31.12.2023
0.5747	ex28164000	10	Barium hydroxide (CAS RN 17194-00-2)	0 %	—	31.12.2022
0.7594	ex28181011	10	Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,0	0 %	—	31.12.2023
0.5110	ex28181091	20	Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:94 % or more, but less than 98,5 % of aluminium oxide,2 % (± 1,5 %) of magnesium oxide,1 % (± 0,6 %) of yttrium oxide,andeither 2 % (± 1,2 %) of lanthanum oxide, or2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm	0 %	—	31.12.2025
0.4640	ex28182000	10	Activated alumina with a specific surface area of at least 350 m2/g	0 %	—	31.12.2024
0.6837	ex28183000	20	Aluminium hydroxide (CAS RN 21645-51-2)in the form of powder,with a purity by weight of 99,5 % or more,with a decomposition point of 263°C or more,with a particle size of 4 μm (± 1 μm),with a Total-Na2O-content by weight of not more than 0,06 %	0 %	—	31.12.2025
0.3306	ex28183000	30	Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)	0 %	—	31.12.2023
0.5369	ex28199090	10	Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy	0 %	—	31.12.2021
0.5752	ex28230000	10	Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 0,7 μm or more but not more than 2,1 μm	0 %	—	31.12.2022
0.5576	ex28251000	10	Hydroxylammonium chloride (CAS RN 5470-11-1)	0 %	—	31.12.2022
0.7897	ex28252000	10	Lithium hydroxide monohydrate (CAS RN 1310-66-3)	2.6 %	—	31.12.2021
0.3800	28253000		Vanadium oxides and hydroxides	0 %	—	31.12.2021
0.3303	ex28255000	20	Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride	0 %	—	31.12.2023
0.6819	ex28255000	30	Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm	0 %	—	31.12.2025
0.5555	ex28256000	10	Zirconium dioxide (CAS RN 1314-23-4)	0 %	—	31.12.2022
0.6980	ex28257000	10	Molybdenum trioxide (CAS RN 1313-27-5)	0 %	—	31.12.2021
0.7193	ex28257000	20	Molybdic Acid (CAS RN 7782-91-4)	0 %	—	31.12.2021
0.5055	ex28261990	10	Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more	0 %	—	31.12.2025
0.5498	ex28269080	10	Lithium hexafluorophosphate (1-) (CAS RN 21324-40-3)	2,7 %	—	31.12.2020
0.2865	ex28273985	10	Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %	0 %	—	31.12.2023
0.4180	ex28273985	20	Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more	0 %	—	31.12.2021
0.6143	ex28273985	40	Barium chloride dihydrate (CAS RN 10326-27-9)	0 %	—	31.12.2023
0.4423	ex28274990	10	Hydrated zirconium dichloride oxide (CAS RN 7699-43-6)	0 %	—	31.12.2023
0.6463	ex28276000	10	Sodium iodide (CAS RN 7681-82-5)	0 %	—	31.12.2024
0.7596	ex28281000	10	Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more	0 %	—	31.12.2023
0.3302	ex28301000	10	Disodium tetrasulphide (CAS RN 12034-39-8), containing by weight 38 % or less of sodium calculated on the dry weight	0 %	—	31.12.2023
0.3859	ex28332980	20	Manganese sulphate monohydrate (CAS RN 10034-96-5)	0 %	—	31.12.2023
0.5090	ex28332980	30	Zirconium sulphate (CAS RN 14644-61-2)	0 %	—	31.12.2021
0.4338	ex28351000	10	Sodium hypophosphite monohydrate (CAS RN 10039-56-2)	0 %	—	31.12.2022
0.6144	ex28351000	20	Sodium hypophosphite (CAS RN 7681-53-0)	0 %	—	31.12.2023
0.7452	ex28351000	30	Aluminium Phosphinate (CAS RN 7784-22-7)	0 %	—	31.12.2023
0.2524	ex28369100	20	Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:2 mg/kg or more of arsenic,200 mg/kg or more of calcium,200 mg/kg or more of chlorides,20 mg/kg or more of iron,150 mg/kg or more of magnesium,20 mg/kg or more of heavy metals,300 mg/kg or more of potassium,300 mg/kg or more of sodium,200 mg/kg or more of sulphates,determined according to the methods specified in the European Pharmacopœia	0 %	—	31.12.2023
0.2863	ex28369917	30	Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356‐18-6) with a purity by weight of 96 % or more	0 %	—	31.12.2023
0.3300	ex28371900	20	Copper cyanide (CAS RN 544-92-3)	0 %	—	31.12.2023
0.4078	ex28372000	10	Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)	0 %	—	31.12.2021
0.4339	ex28391900	10	Disodium disilicate (CAS RN 13870-28-5)	0 %	—	31.12.2022
0.2861	ex28399000	20	Calcium silicate (CAS RN 1344-95-2)	0 %	—	31.12.2023
0.6632	ex28402090	10	Zinc borate (CAS RN 12767-90-7)	0 %	—	31.12.2025
0.7288	ex28415000	11	Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more	2 %	—	31.12.2021
0.6142	ex28417000	10	Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)	0 %	—	31.12.2023
0.6482	ex28417000	30	Hexaammonium heptamolybdate, anhydrous (CAS RN 12027‐67-7) or as tetrahydrate (CAS RN 12054-85-2)	0 %	—	31.12.2024
0.6981	ex28417000	40	Diammonium dimolybdate (CAS RN 27546-07-2)	0 %	—	31.12.2021
0.4323	ex28418000	10	Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)	0 %	—	31.12.2022
0.7301	ex28419030	10	Potassium metavanadate (CAS RN 13769-43-2)	0 %	—	31.12.2022
0.4222	ex28419085	10	Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %	2.7 %	—	31.12.2021
0.5936	ex28419085	20	Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more	0 %	—	31.12.2023
0.4416	ex28421000	10	Synthetic beta zeolite powder	0 %	—	31.12.2023
0.4588	ex28421000	20	Synthetic chabasite zeolite powder	0 %	—	31.12.2024
0.7097	ex28421000	40	Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations	0 %	—	31.12.2021
0.7397	ex28421000	50	Fluorphlogopite (CAS RN 12003-38-2)	0 %	—	31.12.2022
0.4642	ex28429010	10	Sodium selenate (CAS RN 13410-01-0)	0 %	—	31.12.2024
0.7400	ex28429080	30	Aluminium trititanium dodecachloride (CAS RN 12003-13-3)	0 %	—	31.12.2022
0.3295	28451000		Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)	0 %	—	31.12.2023
0.3297	28459010		Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)	0 %	—	31.12.2023
0.4189	ex28459090	10	Helium-3 (CAS RN 14762-55-1)	0 %	—	31.12.2021
0.4191	ex28459090	20	Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)	0 %	—	31.12.2023
0.4190	ex28459090	30	(13C)Carbon monoxide (CAS RN 1641-69-6)	0 %	—	31.12.2021
0.2859	ex28461000ex38249996	1053	Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight	0 %	—	31.12.2023
0.3296	ex28461000	20	Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated	0 %	—	31.12.2023
0.3420	ex28461000	30	Cerium lanthanum carbonate, whether or not hydrated	0 %	—	31.12.2023
0.3227	28469010284690202846903028469090		Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 28461000	0 %	—	31.12.2023
0.3418	ex28500020	10	Silane (CAS RN 7803-62-5)	0 %	—	31.12.2023
0.3419	ex28500020	80	Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more	0 %	—	31.12.2024
0.4332	ex28500020	30	Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm	0 %	—	31.12.2022
0.5497	ex28500020	40	Germanium tetrahydride (CAS RN 7782-65-2)	0 %	—	31.12.2021
0.7302	ex28500020	60	Disilane (CAS RN 1590-87-0)	0 %	—	31.12.2022
0.7555	ex28500020	70	Cubic Boron nitride (CAS RN 10043-11-5)	0 %	—	31.12.2023
0.4492	ex28500060	10	Sodium azide (CAS RN 26628-22-8)	0 %	—	31.12.2023
0.3421	ex28539090	20	Phosphine (CAS RN 7803-51-2)	0 %	—	31.12.2023
0.7289	ex29033919	20	5-Bromopent-1-ene (CAS RN 1119-51-3)	0 %	—	31.12.2022
0.7974	ex29033919	40	3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.6633	29033921		Difluoromethane (CAS RN 75-10-5)	0 %	—	31.12.2025
0.6007	ex29033924	10	Pentafluoroethane (CAS RN 354-33-6)	0 %	—	31.12.2024
0.3674	ex29033926	10	1,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification:not more than 600 ppm by weight of R134 (1,1,2,2‐tetrafluoroethane),not more than 5 ppm by weight of R143a (1,1,1‐trifluoroethane),not more than 2 ppm by weight of R125 (pentafluoroethane),not more than 100 ppm by weight of R124 (1‐chloro‐1,2,2,2-tetrafluoroethane),not more than 30 ppm by weight of R114 (1,2‐dichlorotetrafluoroethane),not more than 50 ppm by weight of R114a (1,1‐Dichlorotetrafluoroethane),not more than 250 ppm by weight of R133a (1‐Chloro‐2,2,2-Trifluoroethane),not more than 2 ppm by weight of R22 (Chlorodifluoromethane),not more than 2 ppm by weight of R115 (Chloropentafluoroethane),not more than 2 ppm by weight of R12 (Dichlorodifluoromethane),not more than 20 ppm by weight of R40 (Methyl chloride),not more than 20 ppm by weight of R245cb (1,1,1,2,2‐pentafluoropropane),not more than 20 ppm by weight of R12B1 (Chlorodifluorobromomethane),not more than 20 ppm by weight of R32 (Difluoromethane),not more than 15 ppm by weight of R31 (Chlorofluoromethane),not more than 10 ppm by weight of R152a (1,1‐Difluoroethane),not more than 20 ppm by weight of 1131 (1‐Chloro‐2‐Fluoroethylene),not more than 20 ppm by weight of 1122 (1‐Chloro‐2,2‐Difluoroethylene),not more than 3 ppm by weight of 1234yf (2,3,3,3‐Tetrafluoropropene),not more than 3 ppm by weight of 1243zf (3,3,3 Trifluoropropene),not more than 3 ppm by weight of 1122a (1‐chloro‐1,2‐difluoroethylene),not more than 4,5 ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene),not more than 3 ppm by weight of any individual unspecified/unknown chemical,not more than 10 ppm by weight of all unspecified/unknown chemicals combined,not more than 10 ppm by weight of Water,with an acidity level of not more than 0,1 ppm by weight,without Halides,not more than 0,01 % by volume of High Boilers,without any odour (no malodour),for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2)	0 %	—	31.12.2024
0.2542	ex29033927	10	1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)	0 %	—	31.12.2023
0.2854	ex29033928	10	Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)	0 %	—	31.12.2023
0.2852	ex29033928	20	Perfluoroethane (CAS RN 76-16-4)	0 %	—	31.12.2023
0.6077	ex29033929	10	1H-Perfluorohexane (CAS RN 355-37-3)	0 %	—	31.12.2023
0.5803	29033931		2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)	0 %	—	31.12.2022
0.4517	ex29033935	20	Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)	0 %	—	31.12.2023
0.5472	ex29033939	10	Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)	0 %	—	31.12.2021
0.6076	ex29033939	20	(Perfluorobutyl) ethylene (CAS RN 19430-93-4)	0 %	—	31.12.2023
0.4066	ex29033939	30	Hexafluoropropene (CAS RN 116-15-4)	0 %	—	31.12.2021
0.7324	ex29033939	40	1,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2)	0 %	—	31.12.2022
0.7895	ex29037200	10	Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.6610	ex29037400	10	2-Chloro-1,1-difluoroethane (CAS RN 338-65-8)	0 %	—	31.12.2020
0.3675	ex29037760	10	1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)	0 %	—	31.12.2023
0.5212	ex29037790	10	Chlorotrifluoroethylene (CAS RN 79-38-9)	0 %	—	31.12.2021
0.7513	ex29037800	10	Octafluoro-1,4-diiodobutane (CAS RN 375-50-8)	0 %	—	31.12.2023
0.7755	ex29037800	20	Trifluoroiodomethane (CAS RN 2314-97-8)	0 %	—	31.12.2024
0.6485	ex29037930	10	Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)	0 %	—	31.12.2024
0.7826	ex29037930	30	1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.2583	ex29038980	45	1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more	2 %	—	31.12.2021
0.5504	ex29038980	40	Hexabromocyclododecane	0 %	—	30.06.2020
0.5765	ex29038980	50	Chlorocyclopentane (CAS RN 930-28-9)	0 %	—	31.12.2022
0.7304	ex29038980	60	Octafluorocyclobutane (CAS RN 115-25-3)	0 %	—	31.12.2022
0.6611	ex29039980	15	4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)	0 %	—	31.12.2025
0.3410	ex29039980	20	1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)	0 %	—	31.12.2023
0.8017	ex29039980	25	2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.8018	ex29039980	35	2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.3411	ex29039980	40	2,6-Dichlorotoluene (CAS RN 118-69-4), of a purity by weight of 99 % or more and containing:0,001 mg/kg or less of tetrachlorodibenzodioxines,0,001 mg/kg or less of tetrachlorodibenzofurans,0,2 mg/kg or less of tetrachlorobiphenyls	0 %	—	31.12.2023
0.8076	ex29039980	45	1-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.4529	ex29039980	50	Fluorobenzene (CAS RN 462-06-6)	0 %	—	31.12.2023
0.8101	ex29039980	55	1-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.7351	ex29039980	60	1,1'-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1)	0 %	—	31.12.2022
0.6235	ex29039980	75	3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)	0 %	—	31.12.2024
0.5917	ex29039980	80	1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)	0 %	—	31.12.2023
0.3407	ex29041000	30	Sodium p-styrenesulphonate (CAS RN 2695-37-6)	0 %	—	31.12.2024
0.4686	ex29041000	50	Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)	0 %	—	31.12.2024
0.3409	ex29042000	10	Nitromethane (CAS RN 75-52-5)	0 %	—	31.12.2025
0.3391	ex29042000	20	Nitroethane (CAS RN 79-24-3)	0 %	—	31.12.2022
0.3408	ex29042000	30	1-Nitropropane (CAS RN 108-03-2)	0 %	—	31.12.2025
0.3390	ex29042000	40	2-Nitropropane (CAS RN 79-46-9)	0 %	—	31.12.2024
0.2972	ex29049100	10	Trichloronitromethane (CAS RN 76-06-2), for the manufacture of goods of subheading 380892	0 %	—	30.06.2020
0.2526	ex29049900	20	1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)	0 %	—	31.12.2024
0.6612	ex29049900	25	Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)	0 %	—	31.12.2025
0.3388	ex29049900	30	Tosyl chloride (CAS RN 98-59-9)	0 %	—	31.12.2024
0.6613	ex29049900	35	1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)	0 %	—	31.12.2025
0.5745	ex29049900	40	4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)	0 %	—	31.12.2022
0.7507	ex29049900	45	2-Nitrobenzenesulfonyl Chloride (CAS RN 1694-92-4)	0 %	—	31.12.2023
0.6001	ex29049900	50	Ethanesulphonyl chloride (CAS RN 594-44-5)	0 %	—	31.12.2023
0.7957	ex29049900	55	2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more	0 %	—	31.12.2025
0.6407	ex29049900	60	4,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7)	0 %	—	31.12.2024
0.6270	ex29049900	70	1-Chloro-4-nitrobenzene (CAS RN 100-00-5)	0 %	—	31.12.2024
0.6560	ex29049900	80	1-Chloro-2-nitrobenzene (CAS RN 88-73-3)	0 %	—	31.12.2024
0.6186	ex29051100	10	Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more	0 %	—	31.12.2023
0.7069	ex29051100ex29051900	2035	Methyl methanesulphonate (CAS RN 66-27-3)	0 %	—	31.12.2021
0.2967	ex29051900	11	Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN	0 %	—	31.12.2023
0.6118	ex29051900	20	Butyltitanate monohydrate, homopolymer (CAS RN 162303‐51‐7)	0 %	—	31.12.2023
0.6119	ex29051900	25	Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)	0 %	—	31.12.2023
0.3384	ex29051900	30	2,6-Dimethylheptan-4-ol (CAS RN 108-82-7)	0 %	—	31.12.2023
0.4793	ex29051900	40	2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)	0 %	—	31.12.2024
0.5534	ex29051900	70	Titanium tetrabutanolate (CAS RN 5593-70-4)	0 %	—	31.12.2022
0.5533	ex29051900	80	Titanium tetraisopropoxide (CAS RN 546-68-9)	0 %	—	31.12.2022
0.6002	ex29051900	85	Titanium tetraethanolate (CAS RN 3087-36-3)	0 %	—	31.12.2023
0.6464	ex29052200	10	Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)	0 %	—	31.12.2024
0.7114	ex29052200	20	3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)	0 %	—	31.12.2021
0.7388	ex29052990	10	Cis-hex-3-en-1-ol (CAS RN 928-96-1)	0 %	—	31.12.2022
0.7674	ex29053200	20	(2S)-propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more	0 %	—	31.12.2023
0.4934	ex29053995	10	Propane-1,3-diol (CAS RN 504-63-2)	0 %	—	31.12.2025
0.5249	ex29053995	20	Butane-1,2-diol (CAS RN 584-03-2)	0 %	—	31.12.2022
0.5255	ex29053995	30	2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)	0 %	—	31.12.2021
0.5847	ex29053995	40	Decane-1,10-diol (CAS RN 112-47-0)	0 %	—	31.12.2022
0.5908	ex29053995	50	2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)	0 %	—	31.12.2023
0.7701	ex29053995	60	Dodecane-1,12-diol (CAS RN 5675-51-4)	0 %	—	31.12.2024
0.7914	ex29053995	70	2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.6724	ex29054900	10	Ethylidynetrimethanol (CAS RN 77-85-0)	0 %	—	31.12.2020
0.4624	ex29055998	20	2,2,2-Trifluoroethanol (CAS RN 75-89-8)	0 %	—	31.12.2024
0.3378	ex29061900	10	Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)	0 %	—	31.12.2023
0.3380	ex29061900	20	4,4'-Isopropylidenedicyclohexanol (CAS RN 80-04-6)	0 %	—	31.12.2023
0.6257	ex29061900	50	4-tert-Butylcyclohexanol (CAS RN 98-52-2)	0 %	—	31.12.2024
0.3681	ex29062900	20	1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)	0 %	—	31.12.2023
0.5855	ex29062900	30	2-Phenylethanol (CAS RN 60-12-8)	0 %	—	31.12.2022
0.6757	ex29062900	40	2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)	0 %	—	31.12.2022
0.7373	ex29062900	50	2,2'-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5)	0 %	—	31.12.2022
0.7806	ex29062900	60	3-[3-(Trifluoromethyl)phenyl]propan-1-ol (CAS RN 78573‐45‐2)	0 %	—	31.12.2024
0.7963	ex29062900	70	1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.6329	ex29071200	20	Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.6559	ex29071200	30	p-Cresol (CAS RN 106-44-5)	0 %	—	31.12.2024
0.5216	ex29071590	10	2-Naphthol (CAS RN 135-19-3)	0 %	—	31.12.2021
0.6256	ex29071910	10	2,6-Xylenol (CAS RN 576-26-1)	0 %	—	31.12.2024
0.4480	ex29071990	20	Biphenyl-4-ol (CAS RN 92-69-3)	0 %	—	31.12.2023
0.7753	ex29071990	30	2-methyl-5-(propan-2-yl)phenol (CAS RN 499-75-2)	0 %	—	31.12.2024
0.3372	ex29072100	10	Resorcinol (CAS RN 108-46-3)	0 %	—	31.12.2023
0.6026	ex29072900	15	6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9)	0 %	—	31.12.2023
0.3369	ex29072900	20	4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)	0 %	—	31.12.2023
0.6454	ex29072900	25	4-Hydroxybenzyl alcohol (CAS RN 623-05-2)	0 %	—	31.12.2024
0.3367	ex29072900	30	4,4',4"-Ethylidynetriphenol (CAS RN 27955-94-8)	0 %	—	31.12.2023
0.5432	ex29072900	45	2-Methylhydroquinone (CAS RN 95-71-6)	0 %	—	31.12.2021
0.3368	ex29072900	50	6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)	0 %	—	31.12.2023
0.6558	ex29072900	65	2,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)	0 %	—	31.12.2024
0.2584	ex29072900	70	2,2',2",6,6',6"-Hexa-tert-butyl-α,α',α"-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)	0 %	—	31.12.2023
0.7402	ex29072900	75	Biphenyl-4,4'-diol (CAS RN 92-88-6)	0 %	—	31.12.2023
0.3848	ex29072900	85	Phloroglucinol whether or not hydrated	0 %	—	31.12.2023
0.5903	ex29081900	10	Pentafluorophenol (CAS RN 771-61-9)	0 %	—	31.12.2023
0.5914	ex29081900	20	4,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)	0 %	—	31.12.2023
0.6260	ex29081900	30	4-Chlorophenol (CAS RN 106-48-9)	0 %	—	31.12.2024
0.6782	ex29081900	40	3,4,5-Trifluorophenol (CAS RN 99627-05-1)	0 %	—	31.12.2025
0.6915	ex29081900	50	4-Fluorophenol (CAS RN 371-41-5)	0 %	—	31.12.2025
0.7720	ex29081900	60	2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol (CAS RN 79‐94-7)	0 %	—	31.12.2024
0.3361	ex29091990	20	Bis(2-chloroethyl) ether (CAS RN 111-44-4)	0 %	—	31.12.2023
0.3359	ex29091990	30	Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more	0 %	—	31.12.2023
0.4035	ex29091990	50	3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)	0 %	—	31.12.2021
0.5407	ex29092000	10	8-Methoxycedrane (CAS RN 19870-74-7)	0 %	—	31.12.2021
0.5503	ex29093038	20	1,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)	0 %	—	31.12.2021
0.6649	ex29093038	30	1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)	0 %	—	31.12.2025
0.7454	ex29093038	40	4-Benzyloxybromobenzene (CAS RN 6793-92-6)	0 %	—	31.12.2023
0.7828	ex29093038	50	2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.4710	ex29093090	10	2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)	0 %	—	31.12.2024
0.7176	ex29093090	15	{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)	0 %	—	31.12.2021
0.4711	ex29093090	20	1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)	0 %	—	31.12.2024
0.7115	ex29093090	25	1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane	0 %	—	31.12.2021
0.5117	ex29093090	30	3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)	0 %	—	31.12.2025
0.7580	ex29093090	35	1-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738‐29-9)	0 %	—	31.12.2023
0.6614	ex29093090	40	1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)	0 %	—	31.12.2025
0.6783	ex29093090	50	1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)	0 %	—	31.12.2025
0.6784	ex29093090	60	1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)	0 %	—	31.12.2025
0.6994	ex29093090	70	O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)	0 %	—	31.12.2021
0.7079	ex29093090	80	Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more	0 %	—	31.12.2021
0.7706	ex29094400	10	2-Propoxyethanol (CAS RN 2807-30-9)	0 %	—	31.12.2024
0.6927	ex29094980	10	1-Propoxypropan-2-ol (CAS RN 1569-01-3)	0 %	—	31.12.2021
0.3484	ex29095000	10	4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)	0 %	—	31.12.2023
0.4911	ex29095000	20	Ubiquinol (CAS RN 992-78-9)	0 %	—	31.12.2020
0.7846	ex29095000	40	2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.3682	ex29096000	10	Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)	0 %	—	31.12.2023
0.6489	ex29096000	30	3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons	0 %	—	31.12.2024
0.7910	ex29096000	50	Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes	0 %	—	31.12.2024
0.7744	ex29109000	10	2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)	0 %	—	31.12.2024
0.5940	ex29109000	15	1,2-Epoxycyclohexane (CAS RN 286-20-4)	0 %	—	31.12.2023
0.7672	ex29109000	25	Phenyloxirane (CAS RN 96-09-3)	0 %	—	31.12.2023
0.2649	ex29109000	30	2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)	0 %	—	31.12.2023
0.8042	ex29109000	40	[(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.6660	ex29109000	50	2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)	0 %	—	31.12.2025
0.4361	ex29109000	80	Allyl glycidyl ether (CAS RN 106-92-3)	0 %	—	31.12.2021
0.6785	ex29110000	10	Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2)	0 %	—	31.12.2020
0.7116	ex29121900	10	Undecanal (CAS RN 112-44-7)	0 %	—	31.12.2021
0.8073	ex29121900	20	Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.6968	ex29122900	15	2,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)	0 %	—	31.12.2021
0.6967	ex29122900	25	Mixture of isomers consisting of:85 (± 10) % by weight of 4-isobutyl-2-methylbenzaldehyde (CAS RN 73206-60-7),15 (± 10) % by weight of 2-isobutyl-4-methyllbenzaldehyde (CAS RN 68102-28-3)	0 %	—	31.12.2021
0.7314	ex29122900	35	Cinnamaldehyde (CAS RN 104-55-2)	0 %	—	31.12.2022
0.7405	ex29122900	45	p-Phenylbenzaldehyde (CAS RN 3218-36-8)	0 %	—	31.12.2022
0.5755	ex29122900	50	4-Isobutylbenzaldehyde (CAS RN 40150-98-9)	0 %	—	31.12.2023
0.7612	ex29122900	55	Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5)	0 %	—	31.12.2023
0.6072	ex29122900	70	4-tert-Butylbenzaldehyde (CAS RN 939-97-9)	0 %	—	31.12.2023
0.6073	ex29122900	80	4-Isopropylbenzaldehyde (CAS RN 122-03-2)	0 %	—	31.12.2023
0.8147	29124200		Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)	0 %	—	31.12.2025
0.3479	ex29124900	10	3-Phenoxybenzaldehyde (CAS RN 39515-51-0)	0 %	—	31.12.2023
0.5732	ex29124900	20	4-Hydroxybenzaldehyde (CAS RN 123-08-0)	0 %	—	31.12.2022
0.5135	ex29124900	30	Salicylaldehyde (CAS RN 90-02-8)	0 %	—	31.12.2025
0.6678	ex29124900	40	3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)	0 %	—	31.12.2025
0.7353	ex29124900	50	2,6-dihydroxybenzaldehyde (CAS RN 387-46-2)	0 %	—	31.12.2022
0.7712	ex29130000	10	2-Nitrobenzaldehyde (CAS RN 552-89-6)	0 %	—	31.12.2024
0.4228	ex29141990	20	Heptan-2-one (CAS RN 110-43-0)	0 %	—	31.12.2022
0.4274	ex29141990	30	3-Methylbutanone (CAS RN 563-80-4)	0 %	—	31.12.2022
0.4275	ex29141990	40	Pentan-2-one (CAS RN 107-87-9)	0 %	—	31.12.2022
0.7554	ex29141990	60	Zinc acetylacetonate (CAS RN 14024-63-6)	0 %	—	31.12.2023
0.7568	ex29142900	15	oestr-5(10)-ene-3,17-dione (CAS RN 3962-66-1)	0 %	—	31.12.2023
0.3475	ex29142900	20	Cyclohexadec-8-enone (CAS RN 3100-36–5)	0 %	—	31.12.2023
0.7450	ex29142900	25	Cyclohex-2-enone (CAS RN 930-68-7)	0 %	—	31.12.2023
0.4933	ex29142900	30	(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)	0 %	—	31.12.2025
0.8015	ex29142900	35	4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.3480	ex29142900	40	Camphor	0 %	—	31.12.2023
0.8058	ex29142900	45	4-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.5389	ex29142900	50	trans-β-Damascone (CAS RN 23726-91-2)	0 %	—	31.12.2021
0.7422	ex29142900	70	2-sec-butylcyclohexanone (CAS RN 14765-30-1)	0 %	—	31.12.2022
0.7389	ex29142900	80	1-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9)	0 %	—	31.12.2022
0.6265	ex29143900	15	2,6-Dimethyl-1-indanone (CAS RN 66309-83-9)	0 %	—	31.12.2024
0.6447	ex29143900	25	1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)	0 %	—	31.12.2024
0.4227	ex29143900	30	Benzophenone (CAS RN 119-61-9)	0 %	—	31.12.2022
0.4429	ex29143900	50	4-Phenylbenzophenone (CAS RN 2128-93-0)	0 %	—	31.12.2023
0.4428	ex29143900	60	4-Methylbenzophenone (CAS RN 134-84-9)	0 %	—	31.12.2023
0.5739	ex29143900	70	Benzil (CAS RN 134-81-6)	0 %	—	31.12.2022
0.5535	ex29143900	80	4'-Methylacetophenone (CAS RN 122-00-9)	0 %	—	31.12.2022
0.7824	ex29145000	15	1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.4932	ex29145000	20	3'-Hydroxyacetophenone (CAS RN 121-71-1)	0 %	—	31.12.2025
0.5943	ex29145000	25	4'-Methoxyacetophenone (CAS RN 100-06-1)	0 %	—	31.12.2023
0.7797	ex29145000	35	2-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1-one (CAS-RN 71868-15-0)	0 %	—	31.12.2024
0.5904	ex29145000	36	2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)	0 %	—	31.12.2023
0.5435	ex29145000	40	4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)	0 %	—	31.12.2021
0.5809	ex29145000	45	3,4-Dihydroxybenzophenone (CAS RN 10425-11-3)	0 %	—	31.12.2022
0.4235	ex29145000	60	2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)	0 %	—	31.12.2022
0.6591	ex29145000	65	3-Methoxyacetophenone (CAS RN 586-37-8)	0 %	—	31.12.2020
0.6762	ex29145000	75	7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)	0 %	—	31.12.2022
0.4385	ex29145000	80	2',6'-Dihydroxyacetophenone (CAS RN 699-83-2)	0 %	—	31.12.2023
0.7075	ex29145000	85	4,4'-Dihydroxybenzophenone (CAS RN 611-99-4)	0 %	—	31.12.2021
0.2647	ex29146980	10	2-Ethylanthraquinone (CAS RN 84-51-5)	0 %	—	31.12.2023
0.2643	ex29146980	30	1,4-Dihydroxyanthraquinone (CAS RN 81-64-1)	0 %	—	31.12.2023
0.5430	ex29146980	40	p-Benzoquinone (CAS RN 106-51-4)	0 %	—	31.12.2021
0.6481	ex29146980	50	Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)	0 %	—	31.12.2024
0.6592	ex29147900	15	1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5)	0 %	—	31.12.2020
0.7736	ex29147900	18	2-Chloro-1-cyclopropylethanone (CAS RN 7379-14-8)	0 %	—	31.12.2024
0.5782	ex29147900	20	2,4'-Difluorobenzophenone (CAS RN 342-25-6)	0 %	—	31.12.2022
0.7732	ex29147900	23	5-Chloro-2-hydroxybenzophenone (CAS RN 85-19-8)	0 %	—	31.12.2024
0.6596	ex29147900	25	1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5)	0 %	—	31.12.2020
0.7751	ex29147900	27	(2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone (CAS RN 915095-86-2)	0 %	—	31.12.2024
0.7467	ex29147900	30	5-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7)	0 %	—	31.12.2023
0.7442	ex29147900	35	1-[4-(benzyloxy)phenyl]-2-bromopropan-1-one (CAS RN 35081-45-9)	0 %	—	31.12.2023
0.3474	ex29147900	40	Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)	0 %	—	31.12.2023
0.2640	ex29147900	50	3'-Chloropropiophenone (CAS RN 34841-35-5)	0 %	—	31.12.2023
0.4948	ex29147900	60	4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)	0 %	—	31.12.2021
0.7072	ex29147900	65	1,4-bis(4-Fluorobenzoyl) Benzene (CAS RN 68418-51-9)	0 %	—	31.12.2021
0.5237	ex29147900	70	4-Chloro-4'-hydroxybenzophenone (CAS RN 42019-78-3)	0 %	—	31.12.2021
0.7082	ex29147900	75	4,4'-Difluorobenzophenone (CAS RN 345-92-6)	0 %	—	31.12.2021
0.6120	ex29147900	80	Tetrachloro-p-benzoquinone (CAS RN 118-75-2)	0 %	—	31.12.2023
0.7214	ex29151200	10	Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)	0 %	—	31.12.2021
0.7955	ex29152400	10	Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.7433	ex29153900	10	Cis-3-hexenyl acetate (CAS RN 3681-71-8)	0 %	—	31.12.2022
0.6155	ex29153900	25	2-Methylcyclohexyl acetate (CAS RN 5726-19-2)	0 %	—	31.12.2023
0.7423	ex29153900	30	4-tert-butylcyclohexyl acetate (CAS RN 32210-23-4)	0 %	—	31.12.2022
0.2957	ex29153900	40	tert-Butyl acetate (CAS RN 540-88-5)	0 %	—	31.12.2023
0.5119	ex29153900	60	Dodec-8-enyl acetate (CAS RN 28079-04-1)	0 %	—	31.12.2025
0.5121	ex29153900	65	Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)	0 %	—	31.12.2025
0.5120	ex29153900	70	Dodec-9-enyl acetate (CAS RN 16974-11-1)	0 %	—	31.12.2025
0.5289	ex29153900	75	Isobornyl acetate (CAS RN 125-12-2)	0 %	—	31.12.2021
0.5301	ex29153900	80	1-Phenylethyl acetate (CAS RN 93-92-5)	0 %	—	31.12.2021
0.5909	ex29153900	85	2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)	0 %	—	31.12.2023
0.7834	ex29154000	10	Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.7830	ex29154000	20	Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more	0 %	—	31.12.2024
0.5858	ex29156019	10	Ethyl butyrate (CAS RN 105-54-4)	0 %	—	31.12.2022
0.7540	ex29157040	10	Methyl palmitate (CAS RN 112-39-0)	0 %	—	31.12.2023
0.7541	ex29159030	10	Methyl laurate (CAS RN 111-82-0)	0 %	—	31.12.2025
0.7899	ex29159070	18	Myristitic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.7407	ex29159070	20	Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)	0 %	—	31.12.2022
0.8146	ex29159070	23	Tin bis(2-ethylhexanoate) (CAS RN 301-10-0) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.7542	ex29159070	25	Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)	0 %	—	31.12.2023
0.6003	ex29159070	27	Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more	0 %	—	31.12.2023
0.5767	ex29159070	30	3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)	0 %	—	31.12.2022
0.5536	ex29159070	35	2,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9)	0 %	—	31.12.2023
0.6255	ex29159070	45	Trimethyl orthoformate (CAS RN 149-73-5)	0 %	—	31.12.2024
0.4791	ex29159070	50	Allyl heptanoate (CAS RN 142-19-8)	0 %	—	31.12.2024
0.4954	ex29159070	60	Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)	0 %	—	31.12.2025
0.6914	ex29159070	65	2-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3)	0 %	—	31.12.2020
0.5217	ex29159070	80	Ethyl difluoroacetate (CAS RN 454-31-9)	0 %	—	31.12.2021
0.2585	ex29161200	10	2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)	0 %	—	31.12.2023
0.3977	ex29161200	40	2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)	0 %	—	31.12.2023
0.5808	ex29161200	70	2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)	0 %	—	31.12.2022
0.3466	ex29161300	30	Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities	0 %	—	31.12.2025
0.3468	ex29161300	40	Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser	0 %	—	31.12.2023
0.2638	ex29161400	10	2,3-Epoxypropyl methacrylate (CAS RN 106-91-2)	0 %	—	31.12.2023
0.6190	ex29161400	20	Ethyl methacrylate (CAS RN 97-63-2)	0 %	—	31.12.2023
0.2951	ex29161995	20	Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)	0 %	—	31.12.2023
0.5991	ex29161995	40	Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds	0 %	—	31.12.2023
0.6238	ex29161995	50	Methyl 2-fluoroacrylate (CAS RN 2343-89-7)	0 %	—	31.12.2024
0.7980	ex29161995	60	Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)	0 %	—	31.12.2025
0.7940	ex29161995	70	Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more	0 %	—	31.12.2025
0.7023	ex29162000	15	Transfluthrin (ISO) (CAS RN 118712-89-3)	0 %	—	31.12.2021
0.7437	ex29162000	20	Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RNs 80657-64-3 and 80623-07-0)	0 %	—	31.12.2022
0.7931	ex29162000	25	Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.7933	ex29162000	35	2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.8057	ex29162000	45	Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3463	ex29162000	50	Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)	0 %	—	31.12.2023
0.4931	ex29162000	60	3-Cyclohexylpropionic acid (CAS RN 701-97-3)	0 %	—	31.12.2025
0.7531	ex29162000	70	Cyclopropanecarbonyl chloride (CAS RN 4023-34-1)	0 %	—	31.12.2023
0.5421	ex29163100	10	Benzyl benzoate (CAS RN 120-51-4)	0 %	—	31.12.2021
0.6248	ex29163990	13	3,5-Dinitrobenzoic acid (CAS RN 99-34-3)	0 %	—	31.12.2024
0.5214	ex29163990	15	2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)	0 %	—	31.12.2021
0.7929	ex29163990	16	3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.2636	ex29163990	20	3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)	0 %	—	31.12.2023
0.7845	ex29163990	22	6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.6557	ex29163990	23	(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)	0 %	—	31.12.2024
0.4951	ex29163990	25	2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)	0 %	—	31.12.2021
0.7827	ex29163990	27	Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.4930	ex29163990	30	2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)	0 %	—	31.12.2025
0.7187	ex29163990	33	Methyl 4'-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)	0 %	—	31.12.2021
0.5944	ex29163990	35	Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)	0 %	—	31.12.2023
0.6794	ex29163990	41	4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)	0 %	—	31.12.2025
0.7734	ex29163990	43	2-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic acid (CAS RN 289686-70-0)	0 %	—	31.12.2024
0.6121	ex29163990	48	3-Fluorobenzoyl chloride (CAS RN 1711-07-5)	0 %	—	31.12.2023
0.2634	ex29163990	50	3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)	0 %	—	31.12.2023
0.6755	ex29163990	51	3-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7)	0 %	—	31.12.2020
0.6661	ex29163990	53	5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)	0 %	—	31.12.2025
0.4238	ex29163990	55	4-tert-Butylbenzoic acid (CAS RN 98-73-7)	0 %	—	31.12.2022
0.7678	ex29163990	57	2-Phenylprop-2-enoic acid (CAS RN 492-38-6)	0 %	—	31.12.2023
0.6803	ex29163990	61	2-Phenylbutyric Acid (CAS RN 90-27-7)	0 %	—	31.12.2020
0.3462	ex29163990	70	Ibuprofen (INN) (CAS RN 15687-27-1)	0 %	—	31.12.2023
0.7117	ex29163990	73	(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)	0 %	—	31.12.2021
0.5541	ex29163990	75	m-Toluic acid (CAS RN 99-04-7)	0 %	—	31.12.2022
0.8039	ex29163990	78	(2,5-dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more	0 %	—	31.12.2025
0.5543	ex29163990	85	(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)	0 %	—	31.12.2022
0.3457	ex29171100	20	Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)	0 %	—	31.12.2023
0.4746	ex29171100	30	Cobalt oxalate (CAS RN 814-89-1)	0 %	—	31.12.2024
0.7563	ex29171200	20	Bis(3,4-epoxycyclohexylmethyl) adipate (CAS RN 3130-19-6)	0 %	—	31.12.2023
0.4684	ex29171910	10	Dimethyl malonate (CAS RN 108-59-8)	0 %	—	31.12.2024
0.5602	ex29171910	20	Diethyl malonate (CAS RN 105-53-3)	0 %	—	31.12.2022
0.6089	ex29171980	15	Dimethyl but-2-ynedioate (CAS RN 762-42-5)	0 %	—	31.12.2023
0.4790	ex29171980	30	Ethylene brassylate (CAS RN 105-95-3)	0 %	—	31.12.2024
0.7451	ex29171980	35	Diethyl methylmalonate (CAS RN 609-08-5)	0 %	—	31.12.2023
0.7880	ex29171980	45	Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more	0 %	—	31.12.2024
0.4918	ex29171980	50	Tetradecanedioic acid (CAS RN 821-38-5)	0 %	—	31.12.2025
0.3454	ex29171980	70	Itaconic acid (CAS RN 97-65-4)	0 %	—	31.12.2023
0.2631	ex29172000	30	1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)	0 %	—	31.12.2023
0.2627	ex29172000	40	3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333‐84-6)	0 %	—	31.12.2023
0.2954	ex29173400	10	Diallyl phthalate (CAS RN 131-17-9)	0 %	—	31.12.2023
0.4945	ex29173995	20	Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)	0 %	—	31.12.2025
0.6796	ex29173995	25	Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)	0 %	—	31.12.2025
0.3640	ex29173995	30	Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)	0 %	—	31.12.2025
0.6800	ex29173995	35	1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)	0 %	—	31.12.2025
0.6123	ex29173995	40	Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)	0 %	—	31.12.2023
0.6553	ex29173995	50	1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)	0 %	—	31.12.2024
0.6554	ex29173995	60	Perylene-3,4:9,10-tetracarboxylic dianhydride (CAS RN 128‐69‐8)	0 %	—	31.12.2024
0.6366	ex29181930	10	Cholic acid (CAS RN 81-25-4)	0 %	—	31.12.2024
0.6367	ex29181930	20	3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)	0 %	—	31.12.2024
0.2950	ex29181998	20	L-Malic acid (CAS RN 97-67-6)	0 %	—	31.12.2023
0.7702	ex29181998	30	Ethyl 1-hydroxycyclopentanecarboxylate (CAS RN 41248-23-1)	0 %	—	31.12.2024
0.7703	ex29181998	40	Ethyl 1-hydroxycyclohexanecarboxylate (CAS RN 1127-01-1)	0 %	—	31.12.2024
0.7907	ex29181998	50	12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters	0 %	—	31.12.2024
0.8044	ex29181998	60	(R)-tert-butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3637	ex29182900	10	Monohydroxynaphthoic acids	0 %	—	31.12.2023
0.5781	ex29182900	35	Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)	0 %	—	31.12.2022
0.8008	ex29182900	40	3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %	0 %	—	31.12.2025
0.3638	ex29182900	50	Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)	0 %	—	31.12.2023
0.5220	ex29182900	60	Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026‐62‐0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457‐20‐2 or 4247‐02-3)	0 %	—	31.12.2021
0.6456	ex29182900	70	3,5-Diiodosalicylic acid (CAS RN 133-91-5)	0 %	—	31.12.2024
0.7344	ex29183000	15	2-fluoro-5-formylbenzoic acid (CAS RN 550363-85-4)	0 %	—	31.12.2022
0.7605	ex29183000	25	(E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2)	0 %	—	31.12.2023
0.4427	ex29183000	30	Methyl-2-benzoylbenzoate (CAS RN 606-28-0)	0 %	—	31.12.2023
0.7864	ex29183000	35	3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)	0 %	—	31.12.2024
0.8075	ex29183000	45	Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more	0 %	—	31.12.2025
0.5857	ex29183000	50	Ethyl acetoacetate (CAS RN 141-97-9)	0 %	—	31.12.2022
0.6250	ex29183000	60	4-Oxovaleric acid (CAS RN 123-76-2)	0 %	—	31.12.2024
0.6455	ex29183000	70	2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)	0 %	—	31.12.2024
0.7062	ex29183000	80	Methyl benzoylformate (CAS RN 15206-55-0)	0 %	—	31.12.2021
0.2946	ex29189990	10	3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)	0 %	—	31.12.2023
0.6814	ex29189990	13	3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)	0 %	—	31.12.2025
0.5856	ex29189990	15	Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)	0 %	—	31.12.2022
0.6901	ex29189990	18	Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)	0 %	—	31.12.2025
0.2949	ex29189990	20	Methyl 3-methoxyacrylate (CAS RN 5788-17-0)	0 %	—	31.12.2024
0.6983	ex29189990	23	1,8-Dihydroxyanthraquinone-3-carboxylic acid (CAS RN 478‐43-3)	0 %	—	31.12.2021
0.6147	ex29189990	25	Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)	0 %	—	31.12.2023
0.7256	ex29189990	27	Ethyl 3-ethoxypropionate (CAS RN 763-69-9)	0 %	—	31.12.2022
0.2948	ex29189990	30	Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)	0 %	—	31.12.2023
0.7597	ex29189990	33	Vanillic Acid (CAS RN 121-34-6) containing:not more than 10 ppm of Palladium (CAS RN 7440‐05‐3),not more than 10 ppm of bismuth (CAS RN 7440-69-9),not more than 14 ppm of formaldehyde (CAS RN 50‐00-0),not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3),not more than 0,5 % by weight of vanillin (CAS RN 121-33-5)	0 %	—	31.12.2023
0.6342	ex29189990	35	p-Anisic acid (CAS RN 100-09-4)	0 %	—	31.12.2024
0.7358	ex29189990	38	Diclofop-methyl (ISO) (CAS RN 51338-27-3)	0 %	—	31.12.2022
0.2945	ex29189990	40	trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)	0 %	—	31.12.2023
0.7934	ex29189990	43	Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more	0 %	—	31.12.2025
0.6224	ex29189990	45	4-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)	0 %	—	31.12.2024
0.8066	ex29189990	48	2-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.2947	ex29189990	50	Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)	0 %	—	31.12.2023
0.6552	ex29189990	55	Stearyl glycyrrhetinate(CAS RN 13832-70-7)	0 %	—	31.12.2024
0.2943	ex29189990	60	3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)	0 %	—	31.12.2023
0.6523	ex29189990	65	Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020‐52-0)	0 %	—	31.12.2024
0.4742	ex29189990	70	Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)	0 %	—	31.12.2024
0.5496	ex29189990	80	Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9)	0 %	—	31.12.2021
0.6747	ex29189990	85	Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more	0 %	—	31.12.2025
0.2942	ex29199000	35	2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100 μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique	0 %	—	31.12.2023
0.7462	ex29199000	15	Benzene-1,3-diyl tetraphenyl bis(phosphate) (CAS RN 57583‐54-7)	0 %	—	31.12.2023
0.7723	ex29199000	25	Triphenyl phosphate (CAS RN 115-86-6)	0 %	—	31.12.2024
0.2940	ex29199000	30	Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)	0 %	—	31.12.2023
0.3867	ex29199000	40	Tri-n-hexylphosphate (CAS RN 2528-39-4)	0 %	—	31.12.2023
0.5495	ex29199000	50	Triethyl phosphate (CAS RN 78-40-0)	0 %	—	31.12.2021
0.6188	ex29199000	60	Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)	0 %	—	31.12.2023
0.6413	ex29199000	70	Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)	0 %	—	31.12.2024
0.2938	ex29201900	10	Fenitrothion (ISO) (CAS RN 122-14-5)	0 %	—	31.12.2023
0.6253	ex29201900	30	2,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide (CAS RN 4090-51-1)	0 %	—	31.12.2024
0.2941	ex29201900	40	Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more	0 %	—	31.12.2023
0.3634	29202300		Trimethyl phosphite (CAS RN 121-45-9)	0 %	—	31.12.2023
0.4158	29202400		Triethyl phosphite (CAS RN 122-52-1)	0 %	—	31.12.2021
0.2626	ex29202900	10	O,O'-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806‐34-6)	0 %	—	31.12.2023
0.7227	ex29202900	15	Phosphorous acid 3,3',5,5'-tetrakis(1,1-dimethylethyl)-6,6'-dimethyl[1,1'-biphenyl]-2,2'-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5)	0 %	—	31.12.2022
0.5038	ex29202900	20	Tris(methylphenyl)phosphite (CAS RN 25586-42-9)	0 %	—	31.12.2025
0.5123	ex29202900	30	2,2'-[[3,3',5,5'-Tetrakis(1,1-dimethylethyl)[1,1'-biphenyl]-2,2'-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine] (CAS RN 138776-88-2)	0 %	—	31.12.2020
0.5045	ex29202900	40	Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)	0 %	—	31.12.2025
0.6004	ex29202900	50	Fosetyl-aluminium (CAS RN 39148-24-8)	0 %	—	31.12.2023
0.7031	ex29202900	60	Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides	0 %	—	31.12.2021
0.7898	ex29202900	80	2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a content of 95 % or more by weight (CAS RN 126050-54-2)	0 %	—	31.12.2024
0.3635	ex29209010	10	Diethyl sulphate (CAS RN 64-67-5)	0 %	—	31.12.2023
0.7559	ex29209010	15	Ethyl methyl carbonate (CAS RN 623-53-0)	3.2 %	—	31.12.2021
0.2605	ex29209010	20	Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3)	0 %	—	31.12.2023
0.7560	ex29209010	25	Diethyl carbonate (CAS RN 105-58-8)	3,2 %	—	31.12.2020
0.7558	ex29209010	35	Vinylene carbonate (CAS RN 872-36-6)	3,2 %	—	31.12.2020
0.3685	ex29209010	40	Dimethyl carbonate (CAS RN 616-38-6)	0 %	—	31.12.2023
0.3868	ex29209010	50	Di-tert-butyl dicarbonate (CAS RN 24424-99-5)	0 %	—	31.12.2023
0.5756	ex29209010	60	2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)	0 %	—	31.12.2022
0.7068	ex29209010	80	Sodium 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl sulphate (CAS RN 25446-78-0) in the form of a liquid paste with a content by weight in water of 62 % or more but not more than 65 %	0 %	—	31.12.2021
0.7588	ex29209070	20	Diethyl phosphorochloridate (CAS RN 814-49-3)	0 %	—	31.12.2023
0.7465	ex29209070	30	2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS RN 61676-62-8)	0 %	—	31.12.2023
0.5947	ex29209070	60	Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)	0 %	—	31.12.2023
0.6598	ex29209070	80	Bis(pinacolato)diboron (CAS RN 73183-34-3)	0 %	—	31.12.2025
0.5668	29211300		2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)	0 %	—	31.12.2022
0.3629	ex29211999	20	Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)	0 %	—	31.12.2023
0.3631	ex29211999	30	Allylamine (CAS RN 107-11-9)	0 %	—	31.12.2023
0.7073	ex29211999	45	2-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)	0 %	—	31.12.2021
0.5650	ex29211999	70	N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)	0 %	—	31.12.2022
0.6269	ex29211999	80	Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)	0 %	—	31.12.2024
0.8045	ex29212900	15	(2S)-propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3630	ex29212900	20	Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)	0 %	—	31.12.2023
0.8067	ex29212900	25	N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more	0 %	—	31.12.2025
0.3625	ex29212900	30	Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855‐32‐1)	0 %	—	31.12.2023
0.4917	ex29212900	40	Decamethylenediamine (CAS RN 646-25-3)	0 %	—	31.12.2025
0.5256	ex29212900	50	N'-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine (CAS RN 6711-48-4)	0 %	—	31.12.2021
0.7947	ex29212900	70	N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.7488	ex29213010	10	2-(4-(cyclopropanecarbonyl)phenyl)-2-methylpropanoic acid cyclohexylamine salt (CAS RN 1690344-90-1)	0 %	—	31.12.2023
0.4862	ex29213099	30	1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)	0 %	—	31.12.2021
0.5768	ex29213099	40	Cyclopropylamine (CAS RN 765-30-0)	0 %	—	31.12.2022
0.7750	ex29213099	50	Bicyclo[1.1.1]pentan-1-amine hydrochloride (CAS RN 22287‐35-0)	0 %	—	31.12.2024
0.3909	ex29214200	25	Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)	0 %	—	31.12.2023
0.6615	ex29214200	33	2-Fluoroaniline (CAS RN 348-54-9)	0 %	—	31.12.2020
0.3978	ex29214200	35	2-Nitroaniline (CAS RN 88-74-4)	0 %	—	31.12.2023
0.6550	ex29214200	40	Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)	0 %	—	31.12.2024
0.3979	ex29214200	45	2,4,5-Trichloroaniline (CAS RN 636-30-6)	0 %	—	31.12.2023
0.2620	ex29214200	50	3-Aminobenzenesulfonic acid (CAS RN 121-47-1)	0 %	—	31.12.2023
0.7739	ex29214200	55	4-Chloroaniline (CAS RN 106-47-8)	0 %	—	31.12.2024
0.3623	ex29214200	70	2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)	0 %	—	31.12.2024
0.3622	ex29214200	80	4-Chloro-2-nitroaniline (CAS RN 89-63-4)	0 %	—	31.12.2023
0.3687	ex29214200	85	3,5-Dichloroaniline (CAS RN 626-43-7)	0 %	—	31.12.2023
0.5616	ex29214200	86	2,5-Dichloroaniline (CAS RN 95-82-9)	0 %	—	31.12.2022
0.5603	ex29214200	87	N-Methylaniline (CAS RN 100-61-8)	0 %	—	31.12.2022
0.5617	ex29214200	88	3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)	0 %	—	31.12.2022
0.2617	ex29214300	20	4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)	0 %	—	31.12.2023
0.2615	ex29214300	30	3-Nitro-p-toluidine (CAS RN 119-32-4)	0 %	—	31.12.2023
0.3980	ex29214300	40	4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)	0 %	—	31.12.2024
0.5125	ex29214300	50	4-Aminobenzotrifluoride (CAS RN 455-14-1)	0 %	—	31.12.2020
0.5124	ex29214300	60	3-Aminobenzotrifluoride (CAS RN 98-16-8)	0 %	—	31.12.2025
0.7583	ex29214300	70	5-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3)	0 %	—	31.12.2023
0.3621	ex29214400	20	Diphenylamine (CAS RN 122-39-4)	0 %	—	31.12.2023
0.2618	ex29214500	20	2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)	0 %	—	31.12.2024
0.7628	ex29214500	30	(5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548‐48-2)	0 %	—	31.12.2023
0.5994	ex29214500	50	7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)	0 %	—	31.12.2024
0.7316	ex29214500	60	1-Naphthylamine (CAS RN 134-32-7)	0 %	—	31.12.2022
0.7315	ex29214500	70	8-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8)	0 %	—	31.12.2022
0.7629	ex29214500	80	2-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3)	0 %	—	31.12.2023
0.3618	ex29214900	20	Pendimethalin (ISO) (CAS RN 40487-42-1)	3,5 %	—	31.12.2023
0.7705	ex29214900	30	4-Isopropylaniline (CAS RN 99-88-7)	0 %	—	31.12.2024
0.7592	ex29214900	35	2-Ethylaniline (CAS RN 578-54-1)	0 %	—	31.12.2023
0.2609	ex29214900	40	N-1-Naphthylaniline (CAS RN 90-30-2)	0 %	—	31.12.2023
0.8019	ex29214900	45	2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.8020	ex29214900	55	2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.6825	ex29214900	60	2,6-Diisopropylaniline (CAS RN 24544-04-5)	0 %	—	31.12.2025
0.8059	ex29214900	65	Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.5126	ex29214900	80	4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)	0 %	—	31.12.2020
0.3981	ex29215119	30	2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)	0 %	—	31.12.2023
0.4184	ex29215119	40	p-Phenylenediamine (CAS RN 106-50-3)	0 %	—	31.12.2021
0.4498	ex29215119	50	Mono- and dichloroderivatives of p-phenylenediamine and p‐diaminotoluene	0 %	—	31.12.2024
0.5995	ex29215119	60	2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)	0 %	—	31.12.2024
0.6595	ex29215119	70	4-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7)	0 %	—	31.12.2020
0.7894	ex29215190	10	N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more	0 %	—	31.12.2024
0.2612	ex29215990	10	Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8)	0 %	—	31.12.2023
0.3785	ex29215990	30	3,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)	0 %	—	31.12.2022
0.3870	ex29215990	40	4,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8)	0 %	—	31.12.2023
0.5509	ex29215990	60	(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)	0 %	—	31.12.2022
0.6616	ex29215990	70	Tris(4-aminophenyl)methane (CAS RN 548-61-8)	0 %	—	31.12.2020
0.7860	ex29221900	15	Aqueous solution, containing by weight:73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)	0 %	—	31.12.2024
0.5757	ex29221900	20	2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)	0 %	—	31.12.2022
0.7946	ex29221900	29	N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.3617	ex29221900	30	N,N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine) (CAS RN 3033‐62-3)	0 %	—	31.12.2023
0.6947	ex29221900	35	2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)	0 %	—	31.12.2025
0.7179	ex29221900	40	(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)	0 %	—	31.12.2021
0.7480	ex29221900	45	2-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2)	0 %	—	31.12.2023
0.3616	ex29221900	50	2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)	0 %	—	31.12.2024
0.7587	ex29221900	55	3-Aminoadamantan-1-ol (CAS RN 702-82-9)	0 %	—	31.12.2023
0.3871	ex29221900	60	N,N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine) (CAS RN 83016-70-0)	0 %	—	31.12.2023
0.5905	ex29221900	65	trans-4-Aminocyclohexanol (CAS RN 27489-62-9)	0 %	—	31.12.2023
0.7935	ex29221900	70	2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.5986	ex29221900	75	2-Ethoxyethylamine (CAS RN 110-76-9)	0 %	—	31.12.2023
0.4665	ex29221900	80	N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)	0 %	—	31.12.2024
0.5911	ex29221900	85	(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)	0 %	—	31.12.2023
0.5996	ex29222100	10	2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)	0 %	—	31.12.2024
0.2703	ex29222100	30	6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90‐51-7)	0 %	—	31.12.2024
0.2704	ex29222100	40	7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87‐02-5)	0 %	—	31.12.2023
0.3873	ex29222100	50	Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)	0 %	—	31.12.2024
0.5997	ex29222100	60	4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)	0 %	—	31.12.2023
0.2702	ex29222900	20	3-Aminophenol (CAS RN 591-27-5)	0 %	—	31.12.2023
0.3982	ex29222900	25	5-Amino-o-cresol (CAS RN 2835-95-2)	0 %	—	31.12.2023
0.6624	ex29222900	30	1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)	0 %	—	31.12.2025
0.7642	ex29222900	33	o-Phenetidine (CAS RN 94-70-2)	0 %	—	31.12.2023
0.6653	ex29222900	40	4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7)	0 %	—	31.12.2020
0.2936	ex29222900	45	Anisidines	0 %	—	31.12.2023
0.6634	ex29222900	63	Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.4627	ex29222900	65	4-Trifluoromethoxyaniline (CAS RN 461-82-5)	0 %	—	31.12.2024
0.7481	ex29222900	67	4-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1)	0 %	—	31.12.2023
0.2692	ex29222900	70	4-Nitro-o-anisidine (CAS RN 97-52-9)	0 %	—	31.12.2023
0.7026	ex29222900	73	Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)	0 %	—	31.12.2021
0.4956	ex29222900	75	4-(2-Aminoethyl)phenol (CAS RN 51-67-2)	0 %	—	31.12.2025
0.2696	ex29222900	80	3-Diethylaminophenol (CAS RN 91-68-9)	0 %	—	31.12.2023
0.5898	ex29222900	85	4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)	0 %	—	31.12.2023
0.2690	ex29223900	10	1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts	0 %	—	31.12.2023
0.7371	ex29223900	15	2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9)	0 %	—	31.12.2022
0.4914	ex29223900	20	2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)	0 %	—	31.12.2025
0.6838	ex29223900	25	3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5)	0 %	—	31.12.2020
0.7713	ex29223900	30	(2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone (CAS RN 735-06-8)	0 %	—	31.12.2024
0.6761	ex29223900	35	5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)	0 %	—	31.12.2025
0.7800	ex29223900	40	4,4'-Bis(diethylamino)benzophenone (CAS RN 90-93-7)	0 %	—	31.12.2024
0.3546	ex29224300	10	Anthranilic acid (CAS RN 118-92-3)	0 %	—	31.12.2023
0.3547	ex29224985	10	Ornithine aspartate (INNM) (CAS RN 3230-94-2)	0 %	—	31.12.2023
0.7853	ex29224985	13	Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more	0 %	—	31.12.2024
0.5037	ex29224985	17	Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)	0 %	—	31.12.2025
0.5619	ex29224985	20	3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)	0 %	—	31.12.2022
0.6340	ex29224985	25	Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372‐81‐6)	0 %	—	31.12.2024
0.6948	ex29224985	30	Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)	0 %	—	31.12.2021
0.6969	ex29224985	35	2- (3-Amino-4-chloro-benzoyl) benzoic acid (CAS RN 118‐04‐7)	0 %	—	31.12.2021
0.3544	ex29224985	40	Norvaline	0 %	—	31.12.2023
0.3983	ex29224985	50	D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)	0 %	—	31.12.2024
0.4239	ex29224985	60	Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)	0 %	—	31.12.2022
0.6650	ex29224985	65	Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)	0 %	—	31.12.2025
0.4426	ex29224985	70	2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)	0 %	—	31.12.2023
0.7254	ex29224985	75	L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)	0 %	—	31.12.2022
0.6100	ex29224985	80	12-Aminododecanoic acid (CAS RN 693-57-2)	0 %	—	31.12.2023
0.7784	ex29224985	85	Ethyl 4-[[(methylphenylamino)methylene]amino]benzoate (CAS RN 57834-33-0)	0 %	—	30.06.2020
0.7020	ex29225000	10	2-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)	0 %	—	31.12.2021
0.7257	ex29225000	15	3,5-Diiodothyronine (CAS RN 1041-01-6)	0 %	—	31.12.2022
0.4702	ex29225000	20	1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)	0 %	—	31.12.2024
0.7523	ex29225000	35	(2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic acid hydrochloride (CAS RN 5486-79-3)	0 %	—	31.12.2023
0.2681	ex29225000	70	2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate	0 %	—	31.12.2023
0.6226	ex29231000	10	Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)	0 %	—	31.12.2024
0.3543	ex29239000	10	Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (±0,5 %) by weight of tetramethylammonium hydroxide	0 %	—	31.12.2023
0.4499	ex29239000	25	Tetrakis(dimethylditetradecylammonium) molybdate (CAS RN 117342‐25‐3)	0 %	—	31.12.2023
0.7879	ex29239000	50	Betaine hydrochloride (CAS RN 590-46-5) with a purity by weight of 93 % or more	0 %	—	31.12.2024
0.7089	ex29239000	55	Tetrabutylammonium bromide (CAS RN 1643-19-2)	0 %	—	31.12.2021
0.7615	ex29239000	65	N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 %	0 %	—	31.12.2023
0.3538	ex29239000	70	Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:40 % (± 2 %) by weight of tetrapropylammonium hydroxide,0,3 % by weight or less of carbonate,0,1 % by weight or less of tripropylamine,500 mg/kg or less of bromide, and25 mg/kg or less of potassium and sodium taken together	0 %	—	31.12.2023
0.5063	ex29239000	75	Tetraethylammonium hydroxide, in the form of an aqueous solution containing:35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,not more than 1000 mg/kg of chloride,not more than 2 mg/kg of iron, andnot more than 10 mg/kg of potassium	0 %	—	31.12.2025
0.3536	ex29239000	80	Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride	0 %	—	31.12.2023
0.6410	ex29239000	85	N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)	0 %	—	31.12.2024
0.2678	ex29241900	10	2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214‐89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)	0 %	—	31.12.2023
0.6227	ex29241900	15	N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)	0 %	—	31.12.2024
0.8000	ex29241900	18	2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.6597	ex29241900	20	(R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid (CAS RN 181289-33-8)	0 %	—	31.12.2020
0.7258	ex29241900	25	Isobutylidenediurea (CAS RN 6104-30-9)	0 %	—	31.12.2022
0.8027	ex29241900	28	(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3535	ex29241900	30	Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)	0 %	—	31.12.2023
0.8030	ex29241900	33	(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more	0 %	—	31.12.2025
0.6549	ex29241900	35	Acetamide (CAS RN 60-35-5)	0 %	—	31.12.2024
0.8041	ex29241900	38	Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.8049	ex29241900	43	N6-(tert-butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.6996	ex29241900	45	3-Chloro-N-methoxy-N-methylpropanamide (CAS RN 1062512‐53-1)	0 %	—	31.12.2021
0.3689	ex29241900	23	Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more	2 %	—	31.12.2021
0.7060	ex29241900	55	2-Propynyl butylcarbamate (CAS RN 76114-73-3)	0 %	—	31.12.2021
0.4160	ex29241900	60	N,N-Dimethylacrylamide (CAS RN 2680-03-7)	0 %	—	31.12.2021
0.7482	ex29241900	65	2,2,2-trifluoroacetamide (CAS RN 354-38-1)	0 %	—	31.12.2023
0.4380	ex29241900	70	Methylcarbamate (CAS RN 598-55-0)	0 %	—	31.12.2023
0.7575	ex29241900	75	(S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0)	0 %	—	31.12.2023
0.5605	ex29241900	80	Tetrabutylurea (CAS RN 4559-86-8)	0 %	—	31.12.2022
0.2939	ex29242100	10	4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts	0 %	—	31.12.2023
0.5998	ex29242100	20	(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)	0 %	—	31.12.2024
0.3533	29242500		Alachlor (ISO) (CAS RN 15972-60-8)	0 %	—	31.12.2023
0.6047	ex29242970	12	4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88‐64-2)	0 %	—	31.12.2024
0.3534	ex29242970	15	Acetochlor (ISO) (CAS RN 34256-82-1)	0 %	—	31.12.2023
0.6266	ex29242970	17	2-(Trifluoromethyl)benzamide (CAS RN 360-64-5)	0 %	—	31.12.2024
0.6363	ex29242970	19	2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)	0 %	—	31.12.2024
0.4685	ex29242970	20	2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)	0 %	—	31.12.2024
0.6568	ex29242970	23	Benalaxyl-M (ISO) (CAS RN 98243-83-5)	0 %	—	31.12.2024
0.5226	ex29242970	27	2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)	0 %	—	31.12.2021
0.7118	ex29242970	30	Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)	0 %	—	31.12.2021
0.6110	ex29242970	37	Beflubutamid (ISO) (CAS RN 113614-08-7)	0 %	—	31.12.2023
0.5066	ex29242970	40	N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)	0 %	—	31.12.2025
0.5127	ex29242970	45	Propoxur (ISO) (CAS RN 114-26-1)	0 %	—	31.12.2025
0.7841	ex29242970	47	(S)-tert-butyl(1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.7113	ex29242970	50	N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)	0 %	—	31.12.2021
0.5622	ex29242970	53	4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)	0 %	—	31.12.2022
0.5069	ex29242970	55	N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)	0 %	—	31.12.2025
0.8043	ex29242970	58	2-chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.5067	ex29242970	60	N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1)	0 %	—	31.12.2020
0.6832	ex29242970	61	(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288‐8)	0 %	—	31.12.2020
0.6767	ex29242970	62	2-Chlorobenzamide (CAS RN 609-66-5)	0 %	—	31.12.2025
0.5388	ex29242970	63	N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711‐79-0)	0 %	—	31.12.2021
0.6766	ex29242970	64	N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)	0 %	—	31.12.2025
0.7632	ex29242970	67	N,N'-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487‐09-2)	0 %	—	31.12.2023
0.7582	ex29242970	70	N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide	0 %	—	31.12.2023
0.6480	ex29242970	73	Napropamide (ISO) (CAS RN 15299-99-7)	0 %	—	31.12.2024
0.2672	ex29242970	75	3-Amino-p-anisanilide (CAS RN 120-35-4)	0 %	—	31.12.2023
0.8060	ex29242970	78	5-amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.2673	ex29242970	85	p-Aminobenzamide (CAS RN 2835-68-9)	0 %	—	31.12.2023
0.4257	ex29242970	86	Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more	0 %	—	31.12.2022
0.4495	ex29242970	88	5'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide (CAS RN 135‐63-7)	0 %	—	31.12.2023
0.4493	ex29242970	89	Flutolanil (ISO) (CAS RN 66332-96-5)	0 %	—	31.12.2023
0.3690	ex29242970	91	3-Hydroxy-2'-methoxy-2-naphthanilide (CAS RN 135-62-6)	0 %	—	31.12.2023
0.3691	ex29242970	92	3-Hydroxy-2-naphthanilide (CAS RN 92-77-3)	0 %	—	31.12.2024
0.3692	ex29242970	93	3-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5)	0 %	—	31.12.2023
0.3693	ex29242970	94	2'-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)	0 %	—	31.12.2023
0.3863	ex29242970	97	1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)	0 %	—	31.12.2023
0.3526	ex29251100	20	Saccharin and its sodium salt	0 %	—	31.12.2023
0.2674	ex29251995	10	N-Phenylmaleimide (CAS RN 941-69-5)	0 %	—	31.12.2023
0.5612	ex29251995	20	4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)	0 %	—	31.12.2022
0.5740	ex29251995	30	N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)	0 %	—	31.12.2022
0.8013	ex29251995	40	N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more	0 %	—	31.12.2025
0.2934	ex29252900	10	Dicyclohexylcarbodiimide (CAS RN 538-75-0)	0 %	—	31.12.2023
0.5891	ex29252900	20	N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)	0 %	—	31.12.2023
0.6636	ex29252900	30	Guanidine sulphamate (CAS RN 50979-18-5)	0 %	—	31.12.2020
0.7749	ex29252900	40	N-amidinosarcosine (CAS RN 57-00-1)	0 %	—	31.12.2024
0.7832	ex29252900	50	(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.8033	ex29252900	60	Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.8040	ex29252900	70	Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.6786	ex29269070	14	Cyanoacetic acid (CAS RN 372-09-8)	0 %	—	31.12.2020
0.7430	ex29269070	15	2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0)	0 %	—	31.12.2022
0.6258	ex29269070	16	4-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)	0 %	—	31.12.2024
0.6934	ex29269070	17	Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more	0 %	—	31.12.2025
0.7408	ex29269070	18	Flumethrin (ISO) (CAS RN 69770-45-2)	0 %	—	31.12.2022
0.7466	ex29269070	19	2-(4-amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2)	0 %	—	31.12.2023
0.2668	ex29269070	20	2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)	0 %	—	31.12.2024
0.7458	ex29269070	21	4-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9)	0 %	—	31.12.2023
0.7514	ex29269070	22	Acetonitrile (CAS RN 75-05-8)	0 %	—	31.12.2023
0.6109	ex29269070	23	Acrinathrin (ISO) (CAS RN 101007-06-1)	0 %	—	31.12.2023
0.7805	ex29269070	24	2-Hydroxy-2-methylpropiononitrile (CAS RN 75-86-5) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.5227	ex29269070	25	2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)	0 %	—	31.12.2021
0.6149	ex29269070	27	Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)	0 %	—	31.12.2023
0.7201	ex29269070	30	4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)	0 %	—	31.12.2021
0.7406	ex29269070	33	Deltamethrin (ISO) (CAS RN 52918-63-5)	0 %	—	31.12.2022
0.7034	ex29269070	35	4-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)	0 %	—	31.12.2021
0.6970	ex29269070	40	2-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6)	0 %	—	31.12.2021
0.3522	ex29269070	50	Alkyl or alkoxyalkyl esters of cyanoacetic acid	0 %	—	31.12.2023
0.6259	ex29269070	26	Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products	0 %	—	31.12.2024
0.4182	ex29269070	61	m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)	0 %	—	31.12.2021
0.4644	ex29269070	64	Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers	0 %	—	31.12.2024
0.4802	ex29269070	70	Methacrylonitrile (CAS RN 126-98-7)	0 %	—	31.12.2024
0.2543	ex29269070	74	Chlorothalonil (ISO) (CAS RN 1897-45-6)	0 %	—	31.12.2024
0.3521	ex29269070	75	Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453‐11‐0)	0 %	—	31.12.2024
0.3516	ex29269070	80	Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)	0 %	—	31.12.2023
0.3514	ex29269070	86	Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)	0 %	—	31.12.2023
0.3515	ex29269070	89	Butyronitrile (CAS RN 109-74-0)	0 %	—	31.12.2023
0.2667	ex29270000	10	2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride	0 %	—	31.12.2023
0.2665	ex29270000	20	4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305‐05-2)	0 %	—	31.12.2023
0.7337	ex29270000	25	2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)	0 %	—	31.12.2022
0.2810	ex29270000	30	4'-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)	0 %	—	31.12.2023
0.6306	ex29270000	35	C,C'-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180°C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam	0 %	—	31.12.2024
0.3984	ex29270000	60	4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0)	0 %	—	31.12.2023
0.5626	ex29270000	80	4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867‐77-7)	0 %	—	31.12.2022
0.2661	ex29280090	10	3,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-bipropionamide (CAS RN 32687-78-8)	0 %	—	31.12.2023
0.6479	ex29280090	13	Cymoxanil (ISO) (CAS RN 57966-95-7)	0 %	—	31.12.2024
0.6548	ex29280090	18	Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more	0 %	—	31.12.2024
0.6871	ex29280090	23	Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.4929	ex29280090	25	Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution	0 %	—	31.12.2025
0.6985	ex29280090	28	Pentan-2-one oxime (CAS RN 623-40-5)	0 %	—	31.12.2021
0.5438	ex29280090	30	N-Isopropylhydroxylamine (CAS RN 5080-22-8)	0 %	—	31.12.2021
0.7448	ex29280090	33	4-Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7)	0 %	—	31.12.2023
0.8061	ex29280090	38	Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight:30 % or more but not more than 40 % of methoxyammonium chloridenot more than 4 % of hydrochloric acid	0 %	—	31.12.2025
0.2659	ex29280090	40	O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624‐86-2)	0 %	—	31.12.2023
0.8093	ex29280090	43	2-(3-methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.5919	ex29280090	45	Tebufenozide (ISO) (CAS RN 112410-23-8)	0 %	—	31.12.2023
0.6635	ex29280090	50	Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %	0 %	—	31.12.2025
0.5918	ex29280090	55	Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)	0 %	—	31.12.2023
0.6364	ex29280090	65	2-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride	0 %	—	31.12.2024
0.4544	ex29280090	70	Butanone oxime (CAS RN 96-29-7)	0 %	—	31.12.2023
0.5228	ex29280090	75	Metaflumizone (ISO) (CAS RN 139968-49-3)	0 %	—	31.12.2021
0.3510	ex29280090	80	Cyflufenamid (ISO) (CAS RN 180409-60-3)	0 %	—	31.12.2023
0.5266	ex29280090	85	Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)	0 %	—	31.12.2021
0.4714	ex29291000	15	3,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate (CAS RN 91‐97‐4)	0 %	—	31.12.2024
0.5827	ex29291000	20	Butyl isocyanate (CAS RN 111-36-4)	0 %	—	31.12.2022
0.2660	ex29291000	40	m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094‐99-7)	0 %	—	31.12.2023
0.2657	ex29291000	50	m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)	0 %	—	31.12.2023
0.5033	ex29291000	55	2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)	0 %	—	31.12.2022
0.3509	ex29291000	60	Trimethylhexamethylene diisocyanate, mixed isomers	0 %	—	31.12.2023
0.4188	ex29291000	80	1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)	0 %	—	31.12.2022
0.5278	ex29302000	20	2-Isopropylethylthiocarbamate (CAS RN 141-98-0)	0 %	—	31.12.2021
0.4298	ex29302000	40	Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more	0 %	—	31.12.2022
0.5035	ex29309098	10	2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)	0 %	—	31.12.2022
0.8036	ex29309098	11	Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.7483	ex29309098	12	4,4'-Sulfonyldiphenol (CAS RN 80-09-1) used in the manufacture of polyarylsulfones or polyarylethersulfones	0 %	—	31.12.2023
0.5390	ex29309098	13	Mercaptamine hydrochloride (CAS RN 156-57-0)	0 %	—	31.12.2021
0.8047	ex29309098	14	(E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.2932	ex29309098	15	Ethoprophos (ISO) (CAS RN 13194-48-4)	0 %	—	31.12.2023
0.6551	ex29309098	16	3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)	0 %	—	31.12.2024
0.5999	ex29309098	17	2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)	0 %	—	31.12.2024
0.7748	ex29309098	18	Dimethyl sulfone (CAS RN 67-71-0)	0 %	—	31.12.2024
0.6768	ex29309098	19	N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N'-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2)	0 %	—	31.12.2020
0.8050	ex29309098	19	4-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.7799	ex29309098	20	4-(4-Methylphenylthio)benzophenone (CAS RN 83846-85-9)	0 %	—	31.12.2024
0.6750	ex29309098	21	[2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)	0 %	—	31.12.2021
0.6769	ex29309098	22	Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more	0 %	—	31.12.2025
0.5899	ex29309098	23	Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)	0 %	—	31.12.2023
0.7714	ex29309098	24	Phenyl vinyl sulfone (CAS RN 5535-48-8)	0 %	—	31.12.2024
0.2930	ex29309098	25	Thiophanate-methyl (ISO) (CAS RN 23564-05-8)	0 %	—	31.12.2023
0.6873	ex29309098	26	Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more	0 %	—	31.12.2025
0.6585	ex29309098	27	2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)	0 %	—	31.12.2024
0.8069	ex29309098	28	Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste, witha purity of 74 % or more but not more than 87 % by weight, anda maximum water content of 23 % by weight	0 %	—	31.12.2025
0.7859	ex29309098	29	4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.2933	ex29309098	30	4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)	0 %	—	31.12.2023
0.7833	ex29309098	31	(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.6584	ex29309098	33	2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)	0 %	—	31.12.2024
0.3811	ex29309098	35	Glutathione (CAS RN 70-18-8)	0 %	—	31.12.2021
0.7682	ex29309098	38	Allyl isothiocyanate (CAS RN 57-06-7)	0 %	—	31.12.2023
0.2928	ex29309098	40	3,3'-Thiodi(propionic acid) (CAS RN 111-17-1)	0 %	—	31.12.2023
0.6167	ex29309098	43	Trimethylsulfoxonium iodide (CAS RN 1774-47-6)	0 %	—	31.12.2023
0.2931	ex29309098	45	2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)	0 %	—	31.12.2024
0.7689	ex29309098	50	3-Mercaptopropionic acid (CAS RN 107-96-0)	0 %	—	31.12.2023
0.6617	ex29309098	53	Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)	0 %	—	31.12.2025
0.5114	ex29309098	55	Thiourea (CAS RN 62-56-6)	0 %	—	31.12.2025
0.6619	ex29309098	57	Methyl (methylthio)acetate (CAS RN 16630-66-3)	0 %	—	31.12.2020
0.2929	ex29309098	60	Methyl phenyl sulphide (CAS RN 100-68-5)	0 %	—	31.12.2023
0.4629	ex29309098	64	3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961‐52‐2)	0 %	—	31.12.2024
0.5034	ex29309098	65	Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575‐23-7)	0 %	—	31.12.2022
0.4296	ex29309098	68	Clethodim (ISO) (CAS RN 99129-21-2)	0 %	—	31.12.2022
0.3986	ex29309098	77	4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042‐18-7)	0 %	—	31.12.2023
0.4187	ex29309098	78	4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)	0 %	—	31.12.2021
0.2999	ex29309098	80	Captan (ISO) (CAS RN 133-06-2)	0 %	—	31.12.2023
0.4694	ex29309098	81	Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)	3 %	—	31.12.2024
0.7037	ex29309098	85	2-Methyl-1-(methylthio)-2-propanamine (CAS RN 36567-04-1)	0 %	—	31.12.2021
0.7985	ex29309098	88	1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more	0 %	—	31.12.2025
0.4094	ex29309098	89	Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates	0 %	—	31.12.2021
0.7070	ex29309098	93	1-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8)	0 %	—	31.12.2021
0.7078	ex29309098	95	N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6)	0 %	—	31.12.2021
0.7086	ex29309098	97	Diphenyl sulphone (CAS RN 127-63-9)	0 %	—	31.12.2021
0.5741	ex29313990	08	Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution	0 %	—	31.12.2022
0.5492	ex29313990	13	Trioctylphosphine oxide (CAS RN 78-50-2)	0 %	—	31.12.2021
0.6088	ex29313990	23	Di-tert-butylphosphane (CAS RN 819-19-2)	0 %	—	31.12.2023
0.5758	ex29313990	25	(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)	0 %	—	31.12.2022
0.2656	ex29313990	38	N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more	0 %	—	31.12.2024
0.3497	ex29313990	30	Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)	0 %	—	31.12.2023
0.7533	ex29313990	35	Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7)	0 %	—	31.12.2023
0.5229	ex29313990	40	Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124‐64-1)	0 %	—	31.12.2021
0.4433	ex29313990	45	Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS RN 75980-60-8)	0 %	—	31.12.2023
0.3492	ex29313990	48	Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)	0 %	—	31.12.2024
0.7709	ex29313990	50	2-Chloroethylphosphonic acid (CAS RN 16672-87-0) solid or in aqueous solution, with a content by weight of 2‐Chloroethylphosphonic acid of 65 % or more	0 %	—	31.12.2024
0.3987	ex29313990	55	3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657‐64-8)	0 %	—	31.12.2023
0.6608	ex29313990	57	Trimethyl phosphonoacetate (CAS RN 5927-18-4)	0 %	—	31.12.2020
0.3504	ex29319000	03	Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane	0 %	—	31.12.2023
0.4905	ex29319000	05	Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN	0 %	—	31.12.2020
0.7354	ex29319000	10	(3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589‐57‐0)	0 %	—	31.12.2022
0.4515	ex29319000	15	Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl	0 %	—	31.12.2024
0.7320	ex29319000	20	Ferrocene (CAS RN 102-54-5)	0 %	—	31.12.2022
0.8051	ex29319000	23	Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.7951	ex29319000	25	N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.8063	ex29319000	28	Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more	0 %	—	31.12.2025
0.3499	ex29319000	33	Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492‐55‐7)	0 %	—	31.12.2024
0.2654	ex29319000	35	N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)	0 %	—	31.12.2024
0.4121	ex29319000	50	Trimethylsilane (CAS RN 993-07-7)	0 %	—	31.12.2021
0.6916	ex29319000	60	4-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1)	0 %	—	31.12.2020
0.6917	ex29319000	63	Chloroethenyldimethylsilane (CAS RN 1719-58-0)	0 %	—	31.12.2021
0.6946	ex29319000	65	Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)	0 %	—	31.12.2021
0.6928	ex29319000	67	Dimethyltin dioleate (CAS RN 3865-34-7)	0 %	—	31.12.2020
0.6795	ex29319000	70	(4-Propylphenyl)boronic acid (CAS RN 134150-01-9)	0 %	—	31.12.2020
0.3486	ex29321300	10	Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)	0 %	—	31.12.2023
0.4590	ex29321400	10	1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)	0 %	—	31.12.2024
0.6787	ex29321900	20	Tetrahydrofuran-borane (CAS RN 14044-65-6)	0 %	—	31.12.2020
0.3488	ex29321900	40	Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more	0 %	—	31.12.2024
0.4514	ex29321900	41	2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)	0 %	—	31.12.2024
0.7614	ex29321900	65	Tefuryltrione (ISO) (CAS RN 473278-76-1)	0 %	—	31.12.2023
0.3487	ex29321900	70	Furfurylamine (CAS RN 617-89-0)	0 %	—	31.12.2024
0.3611	ex29321900	75	Tetrahydro-2-methylfuran (CAS RN 96-47-9)	0 %	—	31.12.2023
0.5240	ex29321900	80	5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)	0 %	—	31.12.2021
0.2775	ex29322090	10	2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 70516-41-5)	0 %	—	31.12.2023
0.5257	ex29322090	15	Coumarin (CAS RN 91-64-5)	0 %	—	31.12.2021
0.7958	ex29322090	18	4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.7984	ex29322090	23	1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more	0 %	—	31.12.2025
0.5611	ex29322090	40	(S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)	0 %	—	31.12.2022
0.6094	ex29322090	45	2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)	0 %	—	31.12.2023
0.7283	ex29322090	50	L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076‐17-0) or dilactide (CAS RN 95-96-5)	0 %	—	31.12.2022
0.7838	ex29322090	53	(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.2765	ex29322090	55	6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)	0 %	—	31.12.2023
0.4162	ex29322090	60	6'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 29512-49-0)	0 %	—	31.12.2021
0.7812	ex29322090	63	Selamectin (INN) 5Z-isomer (CAS RN 220119-17-5)	0 %	—	31.12.2024
0.6620	ex29322090	65	Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)	0 %	—	31.12.2025
0.7978	ex29329900	68	3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.4161	ex29322090	71	6'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 89331-94-2)	0 %	—	31.12.2021
0.7930	ex29329900	73	5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.7599	ex29322090	75	3-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520‐45‐6)	0 %	—	31.12.2023
0.7936	ex29329900	78	Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3990	ex29322090	80	Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77‐06‐5)	0 %	—	31.12.2023
0.7954	ex29329900	83	6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.4403	ex29322090	84	Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)	0 %	—	31.12.2023
0.3610	ex29329900	10	Bendiocarb (ISO) (CAS RN 22781-23-3)	0 %	—	31.12.2023
0.7202	ex29329900	13	(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)	0 %	—	31.12.2021
0.5269	ex29329900	15	1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)	0 %	—	31.12.2021
0.7178	ex29329900	18	4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)	0 %	—	31.12.2021
0.5387	ex29329900	20	Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)	0 %	—	31.12.2021
0.7431	ex29329900	23	2-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)	0 %	—	31.12.2022
0.5759	ex29329900	25	1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)	0 %	—	31.12.2022
0.7639	ex29329900	27	(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more	0 %	—	31.12.2023
0.7535	ex29329900	33	3-hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8)	0 %	—	31.12.2023
0.7855	ex29329900	37	4-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol (CAS RN 1951-26-4) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.8035	ex29329900	38	1-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.6243	ex29329900	43	Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more	0 %	—	31.12.2024
0.5915	ex29329900	45	2-Butylbenzofuran (CAS RN 4265-27-4)	0 %	—	31.12.2024
0.7766	ex29329900	47	12H-[1]Benzofuro[3,2-c][1]benzoxepin-6-one (CAS RN 28763‐77-1)	0 %	—	31.12.2024
0.4907	ex29329900	50	7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)	0 %	—	31.12.2021
0.6113	ex29329900	53	1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388‐70‐3)	0 %	—	31.12.2023
0.6771	ex29329900	65	4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)	0 %	—	31.12.2025
0.4105	ex29329900	70	1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)	0 %	—	31.12.2021
0.4063	ex29329900	75	3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)	0 %	—	31.12.2021
0.4106	ex29329900	80	1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)	0 %	—	31.12.2023
0.3697	ex29329900	85	1,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)	0 %	—	31.12.2023
0.7903	ex29331990	13	3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.6262	ex29331990	15	Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more	0 %	—	31.12.2024
0.7835	ex29331990	17	1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.7918	ex29331990	23	Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more	0 %	—	31.12.2024
0.6261	ex29331990	25	3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)	0 %	—	31.12.2024
0.7836	ex29331990	27	3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.3699	ex29331990	30	3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)	0 %	—	31.12.2023
0.6626	ex29331990	35	1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS RN 191614-02-5)	0 %	—	31.12.2020
0.3877	ex29331990	40	Edaravone (INN) (CAS RN 89-25-8)	0 %	—	31.12.2023
0.7938	ex29331990	43	tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.7119	ex29331990	45	5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)	0 %	—	31.12.2021
0.8046	ex29331990	48	1-(3-iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3992	ex29331990	50	Fenpyroximate (ISO) (CAS RN 134098-61-6)	0 %	—	31.12.2024
0.7182	ex29331990	55	5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)	0 %	—	31.12.2021
0.4494	ex29331990	60	Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)	0 %	—	31.12.2024
0.7576	ex29331990	65	4-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120‐52‐2)	0 %	—	31.12.2023
0.4404	ex29331990	70	4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)	0 %	—	31.12.2023
0.7811	ex29331990	33	Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine	0 %	—	31.12.2024
0.5615	ex29331990	80	3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)	0 %	—	31.12.2022
0.6745	ex29332100	35	Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97 % or more	0 %	—	30.06.2020
0.4084	ex29332100	50	1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)	0 %	—	31.12.2021
0.6835	ex29332100	55	1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)	0 %	—	31.12.2025
0.4088	ex29332100	60	DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)	0 %	—	31.12.2021
0.5115	ex29332100	80	5,5-Dimethylhydantoin (CAS RN 77-71-4)	0 %	—	31.12.2025
0.5972	ex29332990	15	Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)	0 %	—	31.12.2023
0.7527	ex29332990	18	2-(2-chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl-1H-imidazole (CAS RN 7189-82-4)	0 %	—	31.12.2023
0.7937	ex29332990	23	1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.5920	ex29332990	28	Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more	0 %	—	31.12.2023
0.5921	ex29332990	45	Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)	0 %	—	31.12.2023
0.2752	ex29332990	50	1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)	0 %	—	31.12.2023
0.6263	ex29332990	55	Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more	0 %	—	31.12.2024
0.5215	ex29332990	60	1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)	0 %	—	31.12.2021
0.6758	ex29332990	65	(S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8)	0 %	—	31.12.2020
0.5470	ex29332990	70	Cyazofamid (ISO) (CAS RN 120116-88-3)	0 %	—	31.12.2021
0.7120	ex29332990	75	2,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)	0 %	—	31.12.2021
0.5821	ex29332990	80	Imazalil (ISO) (CAS RN 35554-44-0)	0 %	—	31.12.2022
0.6415	29333950		Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)	0 %	—	31.12.2024
0.7186	ex29333999	10	2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)	0 %	—	31.12.2021
0.6462	ex29333999	11	2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)	0 %	—	31.12.2024
0.5608	ex29333999	12	2,3-Dichloropyridine (CAS RN 2402-77-9)	0 %	—	31.12.2022
0.6756	ex29333999	13	Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194‐96‐6)	0 %	—	31.12.2020
0.6812	ex29333999	14	N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)	0 %	—	31.12.2022
0.6788	ex29333999	16	Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6)	0 %	—	31.12.2020
0.6941	ex29333999	17	3,5-Dimethylpyridine (CAS RN 591-22-0)	0 %	—	31.12.2020
0.6902	ex29333999	19	Methyl nicotinate (INNM) (CAS RN 93-60-7)	0 %	—	31.12.2020
0.4842	ex29333999	20	Copper pyrithione powder (CAS RN 14915-37-8)	0 %	—	31.12.2021
0.6545	ex29333999	21	Boscalid (ISO) (CAS RN 188425-85-6)	0 %	—	31.12.2024
0.6900	ex29333999	23	2-Chloro-3-cyanopyridine (CAS RN 6602-54-6)	0 %	—	31.12.2020
0.4594	ex29333999	24	2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)	0 %	—	31.12.2024
0.3604	ex29333999	25	Imazethapyr (ISO) (CAS RN 81335-77-5)	0 %	—	31.12.2023
0.6813	ex29333999	26	2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)	0 %	—	31.12.2022
0.7091	ex29333999	27	Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)	0 %	—	31.12.2021
0.6368	ex29333999	28	Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)	0 %	—	31.12.2024
0.6966	ex29333999	29	3,5-Dichloro-2-cyanopyridine (CAS RN 85331-33-5)	0 %	—	31.12.2021
0.8068	ex29333999	30	4-amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more	0 %	—	31.12.2025
0.6458	ex29333999	31	2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)	0 %	—	31.12.2024
0.5241	ex29333999	32	2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)	0 %	—	31.12.2021
0.7181	ex29333999	33	5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)	0 %	—	31.12.2021
0.3878	ex29333999	35	Aminopyralid (ISO) (CAS RN 150114-71-9)	0 %	—	31.12.2023
0.7296	ex29333999	36	1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)	0 %	—	31.12.2022
0.5230	ex29333999	37	Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)	0 %	—	31.12.2021
0.7348	ex29333999	38	(2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6)	0 %	—	31.12.2022
0.7349	ex29333999	39	2,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4)	0 %	—	31.12.2022
0.7184	ex29333999	41	2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)	0 %	—	31.12.2021
0.7121	ex29333999	46	Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more	0 %	—	31.12.2021
0.4706	ex29333999	47	(-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)	0 %	—	31.12.2021
0.4749	ex29333999	48	Flonicamid (ISO) (CAS RN 158062-67-0)	0 %	—	31.12.2024
0.7352	ex29333999	51	2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8)	0 %	—	31.12.2022
0.5610	ex29333999	52	6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)	0 %	—	31.12.2023
0.7456	ex29333999	54	4-methyl-2-pyridylamine (CAS RN 695-34-1)	0 %	—	31.12.2023
0.4646	ex29333999	55	Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more	0 %	—	31.12.2024
0.5760	ex29333999	57	Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)	0 %	—	31.12.2022
0.7598	ex29333999	59	Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0)	0 %	—	31.12.2023
0.2750	ex29333999	60	2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)	0 %	—	31.12.2023
0.7584	ex29333999	61	6-Bromopyridin-2-amine (CAS RN 19798-81-3)	0 %	—	31.12.2023
0.7577	ex29333999	62	Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4)	0 %	—	31.12.2023
0.7617	ex29333999	64	Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8)	0 %	—	31.12.2023
0.3602	ex29333999	65	Acetamiprid (ISO) (CAS RN 135410-20-7)	0 %	—	31.12.2023
0.5946	ex29333999	67	(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387‐74‐2)	0 %	—	31.12.2023
0.7616	ex29333999	68	1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319‐02-8) with a purity by weight of 85 % or more	0 %	—	31.12.2023
0.5494	ex29333999	70	2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)	0 %	—	31.12.2021
0.7704	ex29333999	71	Diflufenican (ISO) (CAS RN 83164-33-4)	0 %	—	31.12.2024
0.5462	ex29333999	72	5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4)	0 %	—	31.12.2021
0.7737	ex29333999	73	6-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine hydrochloride	0 %	—	31.12.2024
0.7844	ex29333999	74	4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.8072	ex29333999	75	Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more	0 %	—	31.12.2025
0.7813	ex29333999	76	Apalutamide (INN) (CAS RN 956104-40-8)	0 %	—	31.12.2024
0.5922	ex29333999	77	Imazamox (ISO) (CAS RN 114311-32-9)	0 %	—	31.12.2023
0.7818	ex29333999	78	Niraparib tosylate monohydrate (INNM) (CAS RN 1613220‐15‐7)	0 %	—	31.12.2024
0.7754	ex29333999	79	Avibactam (INN) – sodium (CAS RN 1192491-61-4)	0 %	—	31.12.2024
0.8074	ex29333999	80	Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.7906	ex29333999	81	4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.7866	ex29333999	82	Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a purity by dry weight of 92 % or more	0 %	—	31.12.2024
0.7976	ex29333999	83	2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.7925	ex29333999	84	Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.5129	ex29333999	85	2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)	0 %	—	31.12.2025
0.7981	ex29333999	86	3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.7939	ex29333999	87	6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.7986	ex29333999	88	Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more	0 %	—	31.12.2025
0.8096	ex29333999	89	1-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3603	ex29334910	10	Quinmerac (ISO) (CAS RN 90717-03-6)	0 %	—	31.12.2023
0.4525	ex29334910	20	3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117‐57-7)	0 %	—	31.12.2023
0.5761	ex29334910	30	Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)	0 %	—	31.12.2022
0.6339	ex29334910	40	4,7-Dichloroquinoline (CAS RN 86-98-6)	0 %	—	31.12.2024
0.6773	ex29334910	50	1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)	0 %	—	31.12.2025
0.7500	ex29334910ex29334990	6065	Roxadustat (INN) (CAS RN 808118-40-3)	0 %	—	31.12.2023
0.7098	ex29334990	25	Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)	0 %	—	31.12.2021
0.4927	ex29334990	30	Quinoline (CAS RN 91-22-5)	0 %	—	31.12.2025
0.6601	ex29334990	35	[1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3)	0 %	—	31.12.2020
0.4926	ex29334990	40	Isoquinoline (CAS RN 119-65-3)	0 %	—	31.12.2020
0.7524	ex29334990	45	6,7-Dimethoxy-3,4- dihydroisoquinoline hydrochloride (CAS RN 20232‐39‐7)	0 %	—	31.12.2023
0.8037	ex29334990	55	2-(tert-butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.3880	ex29334990	70	Quinolin-8-ol (CAS RN 148-24-3)	0 %	—	31.12.2023
0.6087	ex29334990	80	Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1)	0 %	—	31.12.2020
0.4043	ex29335200	10	Malonylurea (barbituric acid) (CAS RN 67-52-7)	0 %	—	31.12.2021
0.7631	ex29335400	10	5,5'-(1,2-diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6)	0 %	—	31.12.2023
0.6468	ex29335995	10	6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)	0 %	—	31.12.2024
0.6151	ex29335995	13	2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)	0 %	—	31.12.2023
0.2578	ex29335995	15	Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)	0 %	—	31.12.2023
0.6895	ex29335995	18	1-Methyl-3-phenylpiperazine (CAS RN 5271-27-2)	0 %	—	31.12.2020
0.2745	ex29335995	20	2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)	0 %	—	31.12.2023
0.6763	ex29335995	21	N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)	0 %	—	31.12.2025
0.7370	ex29335995	22	6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6)	0 %	—	31.12.2022
0.7345	ex29335995	24	1-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8)	0 %	—	31.12.2022
0.7392	ex29335995	26	5-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524‐64-7)	0 %	—	31.12.2022
0.5912	ex29335995	27	2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)	0 %	—	31.12.2023
0.7810	ex29335995	28	6,8-Difluoro-1-(methylamino)-7-(4-methylpiperazin-1-yl)-4-oxo-1,4-dihydroquinoline-3-carboxylic acid (CAS RN 100276-37-7)	0 %	—	31.12.2024
0.3600	ex29335995	30	Mepanipyrim (ISO) (CAS RN 110235-47-7)	0 %	—	31.12.2023
0.6240	ex29335995	33	4,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)	0 %	—	31.12.2024
0.6419	ex29335995	37	6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)	0 %	—	31.12.2024
0.8056	ex29335995	42	2-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.4704	ex29335995	45	1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)	0 %	—	31.12.2024
0.6677	ex29335995	47	6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more	0 %	—	31.12.2025
0.4699	ex29335995	50	2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)	0 %	—	31.12.2024
0.6987	ex29335995	52	6-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more	0 %	—	31.12.2021
0.6607	ex29335995	53	5-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2)	0 %	—	31.12.2020
0.6606	ex29335995	57	5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS RN 13223-43-3)	0 %	—	31.12.2020
0.2744	ex29335995	60	2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)	0 %	—	31.12.2023
0.7578	ex29335995	63	1-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0)	0 %	—	31.12.2023
0.4772	ex29335995	65	1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)	0 %	—	31.12.2024
0.7825	ex29335995	68	Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.2735	ex29335995	70	N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)	0 %	—	31.12.2023
0.5542	ex29335995	77	3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)	0 %	—	31.12.2022
0.7071	ex29335995	87	5-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)	0 %	—	31.12.2021
0.6774	ex29336980	13	Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more	0 %	—	31.12.2025
0.6621	ex29336980	15	2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)	0 %	—	31.12.2025
0.6951	ex29336980	17	Benzoguanamine (CAS RN 91-76-9)	0 %	—	31.12.2021
0.7721	ex29336980	23	1,3,5-tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)	0 %	—	31.12.2024
0.7600	ex29336980	27	Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0)	0 %	—	31.12.2023
0.7952	ex29336980	33	2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.5272	ex29336980	40	Troclosene sodium (INNM) (CAS RN 2893-78-9)	0 %	—	31.12.2021
0.7464	ex29336980	45	2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6)	0 %	—	31.12.2023
0.5131	ex29336980	55	Terbutryn (ISO) (CAS RN 886-50-0)	0 %	—	31.12.2025
0.4957	ex29336980	60	Cyanuric acid (CAS RN 108-80-5)	0 %	—	31.12.2025
0.6127	ex29336980	65	1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)	0 %	—	31.12.2023
0.6477	ex29336980	75	Metamitron (ISO) (CAS RN 41394-05-2)	0 %	—	31.12.2024
0.3882	ex29336980	80	Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)	0 %	—	31.12.2023
0.6960	ex29337900	15	Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)	0 %	—	31.12.2021
0.7346	ex29337900	25	Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)	0 %	—	31.12.2022
0.4294	ex29337900	30	5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)	0 %	—	31.12.2022
0.7453	ex29337900	35	1-tert-butyl 2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate (CAS RN 108963-96-8)	0 %	—	31.12.2023
0.8038	ex29337900	45	1-phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.4524	ex29337900	50	6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)	0 %	—	31.12.2023
0.4985	ex29337900	70	(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)	0 %	—	31.12.2025
0.6563	ex29339980	11	Fenbuconazole (ISO) (CAS RN 114369-43-6)	0 %	—	31.12.2024
0.6564	ex29339980	12	Myclobutanil (ISO) (CAS RN 88671-89-0)	0 %	—	31.12.2024
0.5243	ex29339980	13	5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)	0 %	—	31.12.2021
0.6146	ex29339980	14	2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)	0 %	—	31.12.2023
0.2731	ex29339980	15	2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)	0 %	—	31.12.2023
0.6872	ex29339980	16	Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more	0 %	—	31.12.2025
0.6567	ex29339980	19	2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)	0 %	—	31.12.2024
0.2732	ex29339980	20	2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)	0 %	—	31.12.2023
0.6829	ex29339980	21	1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)	0 %	—	31.12.2025
0.6244	ex29339980	23	Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.5625	ex29339980	24	1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)	0 %	—	31.12.2022
0.8089	ex29339980	25	6-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.6833	ex29339980	26	(2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4‐methylbenzenesulfonate (CUS 0143289-9)	0 %	—	31.12.2020
0.6409	ex29339980	27	5,6-Dimethylbenzimidazole (CAS RN 582-60-5)	0 %	—	31.12.2024
0.6760	ex29339980	29	3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7)	0 %	—	31.12.2020
0.3593	ex29339980	30	Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)	0 %	—	31.12.2023
0.6775	ex29339980	31	Triadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more	0 %	—	31.12.2020
0.6249	ex29339980	33	Penconazole (ISO) (CAS RN 66246-88-6)	0 %	—	31.12.2024
0.7043	ex29339980	34	2,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)	0 %	—	31.12.2021
0.6958	ex29339980	36	3-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2)	0 %	—	31.12.2021
0.4695	ex29339980	37	8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)	0 %	—	31.12.2024
0.7045	ex29339980	38	(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)	0 %	—	31.12.2021
0.6961	ex29339980	39	O-(benzotriazol-1-yl)-N,N,N',N'-tetramethyluronium tetrafluoroborate (CAS RN 125700-67-6)	0 %	—	31.12.2021
0.3591	ex29339980	40	trans-4-Hydroxy-L-proline (CAS RN 51-35-4)	0 %	—	31.12.2023
0.7273	ex29339980	41	5-[4'-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)	0 %	—	31.12.2022
0.7185	ex29339980	42	(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)	0 %	—	31.12.2021
0.7177	ex29339980	44	(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)	0 %	—	31.12.2021
0.3582	ex29339980	45	Maleic hydrazide (ISO) (CAS RN 123-33-1)	0 %	—	31.12.2023
0.7269	ex29339980	46	(S)-indoline-2-carboxylic acid (CAS RN 79815-20-6)	0 %	—	31.12.2022
0.5818	ex29339980	47	Paclobutrazol (ISO) (CAS RN 76738-62-0)	0 %	—	31.12.2022
0.7410	ex29339980	48	5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)	0 %	—	31.12.2022
0.3580	ex29339980	50	Metconazole (ISO) (CAS RN 125116-23-6)	3,2 %	—	31.12.2023
0.6986	ex29339980	51	Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides	0 %	—	31.12.2021
0.6665	ex29339980	52	N-Boc-trans-4-Hydroxy-L-proline methyl ester (CAS RN 74844‐91-0)	0 %	—	31.12.2020
0.5945	ex29339980	53	Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CAS RN 1441673-92-2)	0 %	—	31.12.2023
0.6599	ex29339980	54	3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)	0 %	—	31.12.2025
0.4585	ex29339980	55	Pyridaben (ISO) (CAS RN 96489-71-3)	0 %	—	31.12.2024
0.7457	ex29339980	56	Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1)	0 %	—	31.12.2023
0.5901	ex29339980	57	2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)	0 %	—	31.12.2023
0.7649	ex29339980	58	Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more	0 %	—	31.12.2023
0.7673	ex29339980	59	Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9)	0 %	—	31.12.2023
0.7927	ex29339980	60	2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.7624	ex29339980	61	(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1)	0 %	—	31.12.2023
0.7680	ex29339980	63	L-Prolinamide (CAS RN 7531-52-4)	0 %	—	31.12.2023
0.8032	ex29339980	65	1,2,4-Triazole (CAS RN 288-88-0) with a purity by weight of 99 % or more	0 %	—	31.12.2025
0.7839	ex29339980	66	(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.5468	ex29339980	67	Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)	0 %	—	31.12.2021
0.7679	ex29339980	68	5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2',1'-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9)	0 %	—	31.12.2023
0.8053	ex29339980	69	5-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more	0 %	—	31.12.2025
0.7971	ex29339980	70	5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.4384	ex29339980	71	10-Methoxyiminostilbene (CAS RN 4698-11-7)	0 %	—	31.12.2023
0.4503	ex29339980	72	1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)	0 %	—	31.12.2023
0.7759	ex29339980	75	1-[Bis(dimethylamino)methylene]-1H-benzotriazolium hexafluorophosphate(1-) 3-oxide (CAS RN 94790-37-1)	0 %	—	31.12.2024
0.8054	ex29339980	76	2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.8064	ex29339980	77	9-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.4382	ex29339980	78	3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)	0 %	—	31.12.2023
0.7814	ex29339980	79	Upadacitinib (INN) (CAS RN 1310726-60-3)	0 %	—	31.12.2024
0.8014	ex29339980	80	Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.4164	ex29339980	81	1,2,3-Benzotriazole (CAS RN 95-14-7)	0 %	—	31.12.2021
0.4165	ex29339980	82	Tolytriazole (CAS RN 29385-43-1)	0 %	—	31.12.2023
0.6933	ex29339980	87	Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more	0 %	—	31.12.2025
0.7803	ex29339980	83	2-(2H-Benzotriazol-2-yl)-6-(1-methyl-1-Phenethyl)-4-(1,1,3,3-tetramethylbutyl)phenol (CAS RN 73936-91-1)	0 %	—	31.12.2024
0.3886	ex29339980	89	Carbendazim (ISO) (CAS RN 10605-21-7)	0 %	—	30.06.2020
0.3579	ex29341000	10	Hexythiazox (ISO) (CAS RN 78587-05-0)	0 %	—	31.12.2023
0.5531	ex29341000	15	4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163‐97-3)	0 %	—	31.12.2022
0.2725	ex29341000	20	2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)	0 %	—	31.12.2023
0.5530	ex29341000	25	(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)	0 %	—	31.12.2022
0.5538	ex29341000	35	(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)	0 %	—	31.12.2022
0.6264	ex29341000	45	2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)	0 %	—	31.12.2024
0.4750	ex29341000	60	Fosthiazate (ISO) (CAS RN 98886-44-3)	0 %	—	31.12.2024
0.5232	ex29341000	80	3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)	0 %	—	31.12.2021
0.7312	ex29342080	15	Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)	0 %	—	31.12.2022
0.5252	ex29342080	30	2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)	0 %	—	31.12.2021
0.4346	ex29342080	25	1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one	0 %	—	31.12.2022
0.4955	ex29342080	60	Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)	0 %	—	31.12.2022
0.4910	ex29342080	70	N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)	0 %	—	31.12.2025
0.5537	ex29343090	10	2-Methylthiophenothiazine (CAS RN 7643-08-5)	0 %	—	31.12.2022
0.6492	ex29349990	10	Fluralaner (INN) (CAS RN 864731-61-3)	0 %	—	31.12.2024
0.5924	ex29349990	12	Dimethomorph (ISO) (CAS RN 110488-70-5)	0 %	—	31.12.2023
0.3577	ex29349990	15	Carboxin (ISO) (CAS RN 5234-68-4)	0 %	—	31.12.2023
0.6476	ex29349990	16	Difenoconazole (ISO) (CAS RN 119446-68-3)	0 %	—	31.12.2024
0.7843	ex29349990	17	(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.4715	ex29349990	20	Thiophene (CAS RN 110-02-1)	0 %	—	31.12.2024
0.5263	ex29349990	23	Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)	0 %	—	31.12.2021
0.6241	ex29349990	24	Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.4942	ex29349990	25	2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)	0 %	—	31.12.2025
0.6252	ex29349990	26	4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)	0 %	—	31.12.2024
0.6362	ex29349990	27	2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)	0 %	—	31.12.2024
0.5242	ex29349990	28	11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)	0 %	—	31.12.2021
0.7837	ex29349990	29	(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.4700	ex29349990	30	Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)	0 %	—	31.12.2024
0.6744	ex29349990	31	Uridine 5'-diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1)	0 %	—	31.12.2020
0.6743	ex29349990	32	Uridine 5'-diphosphoglucuronic acid trisodium salt (CAS RN 63700-19-6)	0 %	—	31.12.2020
0.7840	ex29349990	33	(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.6733	ex29349990	34	7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4)	0 %	—	31.12.2020
0.6776	ex29349990	36	Oxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more	0 %	—	31.12.2020
0.5813	ex29349990	37	4-Propan-2-ylmorpholine (CAS RN 1004-14-4)	0 %	—	31.12.2022
0.6824	ex29349990	39	4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)	0 %	—	31.12.2025
0.8094	ex29349990	40	2,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.6823	ex29349990	41	11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)	0 %	—	31.12.2025
0.6922	ex29349990	42	1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)	0 %	—	31.12.2024
0.6893	ex29349990	44	Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more	0 %	—	31.12.2025
0.7144	ex29349990	46	4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)	0 %	—	31.12.2021
0.7123	ex29349990	47	Thidiazuron (ISO) (CAS RN 51707-55-2) with a content by weight of 98 % or more	0 %	—	31.12.2021
0.5453	ex29349990	48	Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)	0 %	—	31.12.2021
0.7188	ex29349990	49	Cytidine 5'-(disodium phosphate) (CAS RN 6757-06-8)	0 %	—	31.12.2021
0.4943	ex29349990	50	10-[1,1'-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate (CAS RN 591773-92-1)	0 %	—	31.12.2020
0.7259	ex29349990	52	Epoxiconazole (ISO) (CAS RN 133855-98-8)	0 %	—	31.12.2022
0.7146	ex29349990	53	4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)	0 %	—	31.12.2021
0.7311	ex29349990	54	2-benzyl-2-dimethylamino-4'-morpholinobutyrophenone (CAS RN 119313-12-1)	0 %	—	31.12.2022
0.8031	ex29349990	55	Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.7297	ex29349990	56	1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)	0 %	—	31.12.2022
0.7229	ex29349990	57	(6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709‐09-3)	0 %	—	31.12.2022
0.3575	ex29349990	58	Dimethenamide-P (ISO) (CAS RN 163515-14-8)	0 %	—	31.12.2023
0.7387	ex29349990	59	Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)	0 %	—	31.12.2022
0.2718	ex29349990	60	DL-Homocysteine thiolactone hydrochloride (CAS RN 6038‐19‐3)	0 %	—	31.12.2023
0.7459	ex29349990	61	5-(1,2-dithiolan-3-yl)valeric acid (CAS RN 1077-28-7)	0 %	—	31.12.2023
0.7536	ex29349990	62	(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 17-acetate (CAS RN 119302-24-8)	0 %	—	31.12.2023
0.7537	ex29349990	63	(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4)	0 %	—	31.12.2023
0.7449	ex29349990	64	2-Bromo-5-benzoylthiophene (CAS RN 31161-46-3)	0 %	—	31.12.2023
0.7926	ex29349990	65	Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.4512	ex29349990	66	Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)	0 %	—	31.12.2023
0.7809	ex29349990	68	Afatinib dimaleate (INNM) (CAS RN 850140-73-7)	0 %	—	31.12.2024
0.7842	ex29349990	69	3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more	0 %	—	31.12.2024
0.7944	ex29349990	70	1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.7731	ex29349990	73	Tetrahydrouridine (CAS RN 18771-50-1)	0 %	—	31.12.2024
0.4249	ex29349990	74	2-Isopropylthioxanthone (CAS RN 5495-84-1)	0 %	—	31.12.2022
0.4052	ex29349990	75	(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971‐95-1)	0 %	—	31.12.2021
0.4058	ex29349990ex32042000	7610	2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)	0 %	—	31.12.2021
0.7579	ex29349990	78	[(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738‐19-7)	0 %	—	31.12.2023
0.4388	ex29349990	79	Thiophen-2-ethanol (CAS RN 5402-55-1)	0 %	—	31.12.2023
0.7657	ex29349990	80	2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4)	0 %	—	31.12.2023
0.8048	ex29349990	81	1-(4-aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more	0 %	—	31.12.2025
0.7815	ex29349990	82	Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more	0 %	—	31.12.2024
0.4643	ex29349990	83	Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more	0 %	—	31.12.2024
0.4645	ex29349990	84	Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more	0 %	—	31.12.2024
0.5133	ex29349990	86	Dithianon (ISO) (CAS RN 3347-22-6)	0 %	—	31.12.2025
0.5136	ex29349990	87	2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)	0 %	—	31.12.2025
0.7738	ex29349990	88	(7S,9aS)-7-((benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine dioxalate (CAS RN 1268364-46-0)	0 %	—	31.12.2024
0.6486	ex29359090	10	Florasulam (ISO) (CAS RN 145701-23-1)	0 %	—	31.12.2024
0.3566	ex29359090	15	Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)	0 %	—	31.12.2023
0.3565	ex29359090	20	Toluenesulphonamides	0 %	—	31.12.2023
0.5239	ex29359090	23	N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)	0 %	—	31.12.2021
0.3563	ex29359090	25	Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)	0 %	—	31.12.2023
0.5261	ex29359090	27	Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)	0 %	—	31.12.2021
0.5894	ex29359090	28	N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)	0 %	—	31.12.2023
0.7183	ex29359090	30	6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)	0 %	—	31.12.2021
0.7677	ex29359090	33	4-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3)	0 %	—	31.12.2023
0.3564	ex29359090	35	Chlorsulfuron (ISO) (CAS RN 64902-72-3)	0 %	—	31.12.2023
0.7572	ex29359090	37	1,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2)	0 %	—	31.12.2023
0.7438	ex29359090	40	Venetoclax (INN) (CAS 1257044-40-8)	0 %	—	31.12.2022
0.5036	ex29359090	42	Penoxsulam (ISO) (CAS RN 219714-96-2)	0 %	—	31.12.2025
0.6370	ex29359090	43	Oryzalin (ISO) (CAS RN 19044-88-3)	0 %	—	31.12.2024
0.7928	ex29359090	44	4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more	0 %	—	31.12.2025
0.3562	ex29359090	45	Rimsulfuron (ISO) (CAS RN 122931-48-0)	0 %	—	31.12.2023
0.6242	ex29359090	47	Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more	0 %	—	31.12.2024
0.5451	ex29359090	48	(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)	0 %	—	31.12.2021
0.2843	ex29359090	50	4,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)	0 %	—	31.12.2023
0.6834	ex29359090	52	(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2)	0 %	—	31.12.2020
0.4636	ex29359090	53	2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)	0 %	—	31.12.2024
0.6777	ex29359090	54	Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more	0 %	—	31.12.2025
0.3560	ex29359090	55	Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)	0 %	—	31.12.2023
0.6802	ex29359090	56	N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)	0 %	—	31.12.2025
0.6903	ex29359090	57	N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)	0 %	—	31.12.2025
0.6811	ex29359090	58	1-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8)	0 %	—	31.12.2020
0.6664	ex29359090	59	Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more	0 %	—	31.12.2025
0.7676	ex29359090	60	4-[(3-Methylphenyl)amino]pyridine-3-sulfonamide (CAS RN 72811-73-5)	0 %	—	31.12.2023
0.4586	ex29359090	63	Nicosulphuron (ISO) (CAS RN 111991-09-4) of a purity by weight of 91 % or more	0 %	—	31.12.2024
0.3561	ex29359090	65	Tribenuron-methyl (ISO) (CAS RN 101200-48-0)	0 %	—	31.12.2023
0.6959	ex29359090	67	N-(2-phenoxyphenyl)methanesulphonamide (CAS RN 51765‐51‐6)	0 %	—	31.12.2021
0.7854	ex29359090	70	(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more	0 %	—	31.12.2024
0.5539	ex29359090	73	(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)	0 %	—	31.12.2022
0.3559	ex29359090	75	Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)	0 %	—	31.12.2023
0.8055	ex29359090	80	4-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more	0 %	—	31.12.2025
0.2844	ex29359090	85	N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride	0 %	—	31.12.2024
0.3704	ex29359090	88	N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)	0 %	—	31.12.2023
0.4048	ex29359090	89	3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)	0 %	—	31.12.2021
0.4944	ex29389030	10	Ammonium glycyrrhizate (CAS RN 53956-04-0)	0 %	—	31.12.2025
0.3554	ex29389090	10	Hesperidin (CAS RN 520-26-3)	0 %	—	31.12.2023
0.5927	ex29389090	20	Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)	0 %	—	31.12.2023
0.7329	ex29389090	30	Rebaudioside A (CAS RN 58543-16-1)	0 %	—	31.12.2022
0.7327	ex29389090	40	Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages	0 %	—	31.12.2022
0.7047	ex29400000	30	D(+)- Trehalose dihydrate (CAS RN 6138-23-4)	0 %	—	31.12.2021
0.7757	ex29400000	50	2,3,4,6-Tetrakis-O-(phenylmethyl)-D-galactopyranose (CAS RN 6386-24-9)	0 %	—	31.12.2024
0.5233	ex29412030	10	Dihydrostreptomycin sulphate (CAS RN 5490-27-7)	0 %	—	31.12.2021
0.6984	ex29420000	10	Sodium triacetoxyborohydride (CAS RN 56553-60-7)	0 %	—	31.12.2021
0.3555	32012000		Wattle extract	0 %	—	31.12.2023
0.7943	ex32019020	10	Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less	0 %	—	31.12.2025
0.3553	ex32019090	20	Tanning extracts derived from gambier and myrobalan fruits	0 %	—	31.12.2023
0.6600	ex32019090ex32029000	4010	Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)	0 %	—	31.12.2021
0.6183	ex32041100	15	Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight	0 %	—	31.12.2023
0.5091	ex32041100	20	Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight	0 %	—	31.12.2021
0.6277	ex32041100	25	N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)	0 %	—	31.12.2024
0.7307	ex32041100	35	Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 of 50 % or more by weight	0 %	—	31.12.2022
0.5235	ex32041100	40	Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight	0 %	—	31.12.2021
0.5134	ex32041100	45	Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)	0 %	—	31.12.2025
0.5264	ex32041100	50	Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight	0 %	—	31.12.2021
0.5236	ex32041100	60	Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight	0 %	—	31.12.2021
0.5440	ex32041200	10	Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight	0 %	—	31.12.2021
0.6972	ex32041200	15	Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight	0 %	—	31.12.2021
0.6975	ex32041200	17	Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181‐77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight	0 %	—	31.12.2021
0.7021	ex32041200	25	Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576‐15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight	0 %	—	31.12.2021
0.6976	ex32041200	27	Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight	0 %	—	31.12.2021
0.6963	ex32041200	35	Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight	0 %	—	31.12.2021
0.6964	ex32041200	37	Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792‐73‐6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight	0 %	—	31.12.2021
0.5925	ex32041200	40	Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)	0 %	—	31.12.2023
0.6965	ex32041200	45	Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight	0 %	—	31.12.2021
0.6971	ex32041200	47	Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269‐87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight	0 %	—	31.12.2021
0.6973	ex32041200	55	Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight	0 %	—	31.12.2021
0.6974	ex32041200	57	Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219‐65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight	0 %	—	31.12.2021
0.6535	ex32041200	60	Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight	0 %	—	31.12.2024
0.6977	ex32041200	65	Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight	0 %	—	31.12.2021
0.6652	ex32041200	70	Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight	0 %	—	31.12.2025
0.4065	ex32041300	10	Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight	0 %	—	31.12.2021
0.7394	ex32041300	15	Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight	0 %	—	31.12.2022
0.7395	ex32041300	25	Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight	0 %	—	31.12.2022
0.5804	ex32041300	30	Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight	0 %	—	31.12.2023
0.7396	ex32041300	35	Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 50 % or more by weight	0 %	—	31.12.2022
0.5805	ex32041300	40	Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight	0 %	—	31.12.2022
0.7398	ex32041300	45	Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 40 % or more by weight	0 %	—	31.12.2022
0.6474	ex32041300	50	Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight	0 %	—	31.12.2024
0.7775	ex32041300	55	Colourant C.I. Basic Violet 16 (CAS RN 6359-45-1) and preparations based thereon with a colourant C.I. Basic Violet 16 content of 60 % or more by weight	0 %	—	31.12.2024
0.6475	ex32041300	60	Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight	0 %	—	31.12.2024
0.7776	ex32041300	65	Colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and preparations based thereon with a colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) content of 50 % or more but not more than 80 % by weight	0 %	—	31.12.2024
0.7777	ex32041300	70	Mixture of the colourants C.I. Basic Yellow 28 (CAS RN 54060‐92-3), C.I. Basic Red 46 (CAS RN 12221-69-1) and C.I. Basic Blue 159 (CAS RN 105953-73-9) and preparations based thereon with a content of colourants C.I. Basic Yellow 28, C.I. Basic Red 46 and C.I. Basic Blue 159 taken together of 60 % or more by weight	0 %	—	31.12.2024
0.7778	ex32041300	75	Colourant C.I. Basic Red 18:1 (CAS RN 12271-12-4) and preparations based thereon with a content of 40 % or more by weight	0 %	—	31.12.2024
0.7779	ex32041300	80	Colourant C.I. Basic Yellow (CAS RN 83949-75-1) and preparations based thereon with a content of 40 % or more by weight	0 %	—	31.12.2024
0.6569	ex32041400	10	Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight	0 %	—	31.12.2024
0.6570	ex32041400	20	Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight	0 %	—	31.12.2024
0.6571	ex32041400	30	C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight	0 %	—	31.12.2024
0.6978	ex32041400	40	Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) and preparations based thereon with a colourant C.I. Direct Black 168 content by weight of 75 % or more, in powder form for leather dyeing	0 %	—	31.12.2021
0.7885	ex32041500	20	Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight	0 %	—	31.12.2024
0.3997	ex32041500	60	Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight	0 %	—	31.12.2023
0.6129	ex32041500	70	Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)	0 %	—	31.12.2023
0.6325	ex32041600	30	Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:Colourant Reactive Yellow 201 (CAS RN 27624-67-5),1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)	0 %	—	31.12.2024
0.7367	ex32041600	40	Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0)with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, andcontaining a preservative	0 %	—	31.12.2022
0.2517	ex32041700	10	Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight	0 %	—	31.12.2023
0.5433	ex32041700	15	Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight	0 %	—	31.12.2021
0.6918	ex32041700	16	Colourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Pigment Red 49:2 content of 60 % or more by weight	0 %	—	31.12.2020
0.7092	ex32041700	18	Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight	0 %	—	31.12.2021
0.6130	ex32041700	19	Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight	0 %	—	31.12.2023
0.5505	ex32041700	20	Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight	0 %	—	31.12.2021
0.6279	ex32041700	21	Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight	0 %	—	31.12.2024
0.5259	ex32041700	22	Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight	0 %	—	31.12.2021
0.6246	ex32041700	23	Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)	0 %	—	31.12.2024
0.6453	ex32041700	24	Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight	0 %	—	31.12.2023
0.5427	ex32041700	25	Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight	0 %	—	31.12.2021
0.7261	ex32041700	26	Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight	0 %	—	31.12.2022
0.7391	ex32041700	29	Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight	0 %	—	31.12.2022
0.7659	ex32041700	31	Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight	0 %	—	31.12.2023
0.6603	ex32041700	33	Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight	0 %	—	31.12.2025
0.5426	ex32041700	35	Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight	0 %	—	31.12.2021
0.7565	ex32041700	37	Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight	0 %	—	31.12.2023
0.4630	ex32041700	40	Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight	0 %	—	31.12.2024
0.6452	ex32041700	45	Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight	0 %	—	31.12.2023
0.5299	ex32041700	65	Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight	0 %	—	31.12.2021
0.5832	ex32041700	75	Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight	0 %	—	31.12.2022
0.5645	ex32041700	80	Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight	0 %	—	31.12.2022
0.5700	ex32041700	85	Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight	0 %	—	31.12.2022
0.5680	ex32041700	88	Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight	0 %	—	31.12.2022
0.6979	ex32041900	13	Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight	0 %	—	31.12.2021
0.6406	ex32041900	14	Red colourant preparation, in a form of wet paste, containing by weight:35 % or more but not more than 40 % of 1‐[[4‐(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1),not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9),not more than 3 % of 1‐[(2‐methylphenyl)azo]naphthalen-2-ol (CAS RN 2646‐17‐5),55 % or more but not more than 65 % of water	0 %	—	31.12.2024
0.7262	ex32041900	16	Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight	0 %	—	31.12.2022
0.5103	ex32041900	71	Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight	0 %	—	31.12.2020
0.5100	ex32041900	73	Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight	0 %	—	31.12.2021
0.5282	ex32041900	77	Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight	0 %	—	31.12.2021
0.5671	ex32041900	84	Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight	0 %	—	31.12.2022
0.5395	ex32042000	30	Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight	0 %	—	31.12.2021
0.6473	ex32049000	10	Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight	0 %	—	31.12.2024
0.7326	ex32049000	20	Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % of a colourant C.I. Solvent Red 175	0 %	—	31.12.2022
0.3707	ex32050000	10	Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry	0 %	—	31.12.2023
0.7658	ex32050000	20	Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2),65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)	0 %	—	31.12.2023
0.7699	ex32050000	30	Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1),65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)	0 %	—	31.12.2023
0.3550	ex32061100	10	Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate	0 %	—	31.12.2023
0.5378	ex32061900	10	Preparation containing by weight:72 % (± 2 %) of mica (CAS RN 12001-26-2), and28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)	0 %	—	31.12.2021
0.3551	ex32064200	10	Lithopone (CAS RN 1345-05-7)	0 %	—	31.12.2023
0.6245	ex32064970	20	Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)	0 %	—	31.12.2024
0.7305	ex32064970	30	Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a C.I. Pigment Black 12 content of 50 % or more by weight	0 %	—	31.12.2022
0.7390	ex32064970	40	Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight	0 %	—	31.12.2022
0.3673	32065000		Inorganic products of a kind used as luminophores	0 %	—	31.12.2023
0.6233	ex32073000	20	Printing paste containing:30 % by weight or more, but not more than 50 % of silver, and8 % by weight or more, but not more than 17 % of palladium	0 %	—	31.12.2024
0.5830	ex32074085	40	Glass flakes (CAS RN 65997-17-3):of a thickness of 0,3 μm or more but not more than 10 μm, andcoated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)	0 %	—	31.12.2022
0.6727	ex32081010	10	Thermoplastic polyester copolymer resin with a solid content of 30 % or more but not more than 50 %, in organic solvents	0 %	—	31.12.2020
0.2511	ex32082010	10	Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer	0 %	—	31.12.2023
0.4511	ex32082010	20	Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether	0 %	—	31.12.2023
0.8137	ex32089019ex39119099	1363	Mixture, containing by weight:30 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),10 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),40 % or more, but not more than 55 % of ethanol (CAS RN 64-17-5),1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)	0 %	—	31.12.2025
0.3967	ex32089019	15	Chlorinated polyolefins, in a solution	0 %	—	31.12.2023
0.5564	ex32089019ex39046980	2589	Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight	0 %	—	31.12.2022
0.2504	ex32089019	40	Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane	0 %	—	31.12.2023
0.6154	ex32089019ex38249992	4563	Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate	0 %	—	31.12.2023
0.6989	ex32089019	47	Solution containing by weight:0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents,75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569‐02‐4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)	0 %	—	31.12.2021
0.2502	ex32089019	50	Solution containing by weight:(65 ± 10) % of γ-butyrolactone,(30 ± 10) % of polyamide resin,(3,5 ±1,5) % of naphthoquinone ester derivative, and(1,5 ±0,5) % of arylsilicic acid	0 %	—	31.12.2023
0.6726	ex32089019	55	Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent	0 %	—	31.12.2021
0.4037	ex32089019	60	Copolymer of hydroxystyrene with one or more of the following:Styrene,Alkoxystyrene,Alkylacrylates,dissolved in ethyl lactate	0 %	—	31.12.2021
0.6005	ex32089019	65	Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants	0 %	—	31.12.2024
0.4301	ex32089019	75	Acenaphthalene copolymer in ethyl lactate solution	0 %	—	31.12.2022
0.3662	ex32151100ex32151900	1010	Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments	0 %	—	31.12.2023
0.5777	ex32151900	20	Ink:consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),with a total solid content by weight of 55 % or more, but not more than 57 %, andwith a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,for use in the manufacture of electrodes	0 %	l	31.12.2022
0.2506	ex32159070	10	Ink formulation, for use in the manufacture of ink-jet cartridges	0 %	—	31.12.2023
0.2501	ex32159070	20	Heat sensitive ink fixed on a plastic film	0 %	—	31.12.2023
0.4533	ex32159070	30	Disposable cartridge ink, containing by weight:1 % or more, but not more than 10 % of amorphous silicon dioxide, or3,8 % or more of dye C.I. Solvent Black 7 in organic solvents,for use in the marking of integrated circuits	0 %	—	31.12.2023
0.5031	ex32159070	40	Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:waxa vinyl-based polymer anda colouring agentfor use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices	0 %	—	31.12.2025
0.3661	33011210		Essential oil of orange, not deterpenated	0 %	—	31.12.2023
0.4863	ex34021190	10	Sodium lauroyl methyl isethionate	0 %	—	31.12.2021
0.4002	ex34021300	10	Vinyl copolymer surface active agent based on polypropylene glycol	0 %	—	31.12.2023
0.4277	ex34021300	20	Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated	0 %	—	31.12.2022
0.6285	ex34029010	10	Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides	0 %	—	31.12.2024
0.3660	ex34029010	20	Mixture of docusate sodium (INN) and sodium benzoate	0 %	—	31.12.2023
0.4935	ex34029010	30	Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1)	0 %	—	31.12.2020
0.4939	ex34029010	50	Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)	0 %	—	31.12.2020
0.4675	ex34029010	60	Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane	0 %	—	31.12.2020
0.4676	ex34029010	70	Surface-active preparation, containing ethoxylated 2,4,7,9‐tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)	0 %	—	31.12.2024
0.7508	ex35019090	10	Non edible sodium caseinate (CAS RN 9005-46-3) in the form of powder with a protein content of more than 88 % by weight for use in the production of thermoplastic granules	0 %	—	31.12.2023
0.2498	ex35069190	10	Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)	0 %	—	31.12.2023
0.4003	ex35069190	30	Two component microencapsulated epoxy adhesive dispersed in a solvent	0 %	—	31.12.2023
0.4313	ex35069190	40	Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)	0 %	—	31.12.2024
0.6725	ex35069190	50	Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,dissolved in:Methyl ethyl ketone (CAS RN 78-93-3),Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)	0 %	—	31.12.2021
0.7268	ex35069190	60	Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989‐27‐5) with a polymeric content by weight of 25 % or more but not more than 35 %	0 %	l	31.12.2022
0.7267	ex35069190	70	Temporary wafer-bonding release in the form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight	0 %	l	31.12.2022
0.6293	ex35079090	10	Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products	0 %	—	31.12.2024
0.6798	ex35079090	20	Creatine amidinohydrolase (CAS RN 37340-58-2)	0 %	—	31.12.2020
0.7050	ex35079090	30	Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with:an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml,a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 %, anda pH value of 6,5 or more, but not more than 8,5	0 %	—	31.12.2021
0.4922	ex36010000	10	Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators	0 %	—	31.12.2021
0.7318	ex36030060	10	Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 29,4 mm and a pin length of 6,68 mm (±0,3 mm) or more but not more than 7,54 mm (±0,3 mm)	0 %	—	31.12.2022
0.3650	ex37071000	10	Photosensitive emulsion for the sensitization of silicon discs	0 %	—	31.12.2023
0.3894	ex37071000	15	Sensitising emulsion consisting of:by weight not more than 12 % of diazooxonaphthalenesulphonic acid ester,phenolic resins,in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone	0 %	—	31.12.2023
0.3895	ex37071000	25	Sensitising emulsion containing:phenolic or acrylic resins,a maximum 2 % by weight of light sensitive acid precursor,in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate	0 %	—	31.12.2023
0.4004	ex37071000	30	Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate	0 %	—	31.12.2023
0.4039	ex37071000	35	Sensitising emulsion or preparation containing one or more of:acrylate polymers,methacrylate polymers,derivatives of styrene polymers,containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2‐methoxy-1-methylethyl acetate	0 %	—	31.12.2021
0.4177	ex37071000	40	Sensitising emulsion, containing:not more than 10 % by weight of naphthoquinonediazide esters,2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene,not more than 7 % by weight of epoxy-containing derivatives,dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate	0 %	—	31.12.2021
0.4647	ex37071000	45	Photosensitive emulsion consisting of cyclized polyisoprene containing:55 % or more but not more than 75 % by weight of xylene, and12 % or more but not more than 18 % by weight of ethylbenzene	0 %	—	31.12.2024
0.4648	ex37071000	50	Photosensitive emulsion containing by weight:20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,5 % or more but not more than 30 % of acrylates,not more than 12 % of a photoinitiator	0 %	—	31.12.2024
0.5929	ex37071000	55	Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N‐ethyl‐2‐pyrrolidone with a polymer content by weight 10 % or more	0 %	—	31.12.2023
0.7338	ex37071000	60	Sensitising emulsion, containing by weight:not more than 5 % of photoacid generator,2 % or more but not more than 50 % of phenolic resins, andnot more than 7 % of epoxy-containing derivatives,dissolved in heptan-2-one and/or ethyllactate	0 %	—	31.12.2022
0.7994	ex38011000	20	Artificial graphite (CAS RN 7782-42-5) powder form, with:specific surface area (measured by BET) of 0,8 m2/g (± 0,25),tap density: 0,85 g/cm3 (± 0,10),particle size represented by d50 value of 21,0 μm (± 2,0),specific discharge capacity of 351,0 mAh/g (± 3,0),initial efficiency of 94,0 % (± 2,0)	1.8 %	—	31.12.2021
0.7975	ex38011000	30	Artificial graphite in powder form, (CAS RN 7782-42-5) with:with or without coating on the surface,particle size represented by d50 value of 15 μm (± 4),specific surface area (measured by BET) less than 3,5 m2/g,tap density: 1,3 g/m3 (± 0,5),specific Discharge Capacity of 348 mAh/g (± 13),initial efficiency above 93,0 %	1.8 %	—	31.12.2021
0.5465	ex38019000	10	Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777‐87-6)	0 %	—	31.12.2021
0.6759	ex38021000	10	Mixture of activated carbon and polyethylene, in form of powder	0 %	—	31.12.2025
0.7368	ex38021000	20	Chemically activated carbon in granular form with a Butane Working Capacity of 11 g butane/100 ml or more (as determined by the ASTM D 5228 method) used for vapour absorption and desorption in emission control canisters of motor vehicles	0 %	—	31.12.2022
0.7441	ex38021000	30	Chemically activated carbon in pellet (cylindrical) form, with:a diameter of 2 mm or more but not more than 3 mm, anda Butane Working Capacity of 5 g butane/100ml or more (as determined by the ASTM D 5228 method),used for vapour absorption and desorption in emission control canisters of motor vehicles	0 %	—	31.12.2021
0.2987	38059010		Pine oil	1,7 %	—	31.12.2023
0.2990	ex38089190	10	Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide	0 %	—	31.12.2023
0.2988	ex38089190	30	Preparation containing endospores or spores and protein crystals derived from either:Bacillus thuringiensis Berliner subsp. aizawai and kurstaki, orBacillusthuringiensis subsp. kurstaki, orBacillusthuringiensis subsp. israelensis, orBacillusthuringiensis subsp. aizawai, orBacillusthuringiensis subsp. tenebrionis	0 %	—	31.12.2024
0.2983	ex38089190	40	Spinosad (ISO)	0 %	—	31.12.2023
0.5710	ex38089190	60	Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn J) and (3'‐ethoxy-spinosyn L)	0 %	—	31.12.2022
0.6874	ex38089230	10	Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more	0 %	—	31.12.2025
0.2986	ex38089290	10	Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale	0 %	—	31.12.2023
0.2984	ex38089290	30	Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:24 % or more but not more than 26 % of pyrithione zinc (INN), or39 % or more but not more than 41 % of pyrithione zinc (INN)	0 %	—	31.12.2023
0.4843	ex38089290	50	Preparations based on copper pyrithione (CAS RN 14915-37-8)	0 %	—	31.12.2024
0.4751	ex38089323	10	Herbicide containing flazasulfuron (ISO) as an active ingredient	0 %	—	31.12.2024
0.5137	ex38089327	40	Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight:30 % or more of tepraloxydim (ISO), andnot more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons	0 %	—	31.12.2021
0.4753	ex38089390	10	Preparation, in the form of granules, containing by weight:38,8 % or more but not more than 41,2 % of Gibberellin A3, or9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7	0 %	—	31.12.2024
0.5048	ex38089390	20	Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amineof a kind used in plant growth regulators	0 %	—	31.12.2025
0.5030	ex38089390	30	Aqueous solution containing by weight:1,8 % of sodium para-nitrophenolate,1,2 % of sodium ortho-nitrophenolate,0,6 % of sodium 5-nitroguaiacolate,for use in the manufacture of a plant growth regulator	0 %	—	31.12.2022
0.5039	ex38089390	40	Mixed white powder containing by weight:3 % or more but not more than 3,6 % of 1‐methylcyclopropene with a purity more than 96 %, andcontaining less than 0,05 % of each impurity of 1‐chloro-2-methylpropene and 3‐chloro‐2‐methylpropene,for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator	0 %	—	31.12.2020
0.5088	ex38089390	50	Preparation in the form of powder, containing by weight:55 % or more of Gibberellin A4,1 % or more but not more than 35 % of Gibberellin A7,90 % or more of Gibberellin A4 and Gibberellin A7 combined,not more than 10 % of a combination of water and other naturally occurring Gibberellins,of a kind used in plant growth regulators	0 %	—	31.12.2021
0.7413	ex38089390	60	Preparation in the form of tablets containing by weight:0,55 % or more but not more than 2,50 % of 1‐methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, andless than 0,05 % of each of the two impurities, 1‐chloro‐2-methylpropene (CAS RN 513-37-1) and 3‐chloro‐2‐methylpropene (CAS RN 563-47-3),for coating	0 %	—	31.12.2022
0.6532	ex38089420	30	Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)	0 %	—	31.12.2024
0.4920	ex38089990	10	Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water	0 %	—	31.12.2020
0.6000	ex38089990	20	Abamectin (ISO) (CAS RN 71751-41-2)	0 %	—	31.12.2023
0.2557	ex38099100	10	Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate	0 %	—	31.12.2023
0.4406	ex38101000	10	Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:70 % or more, but not more than 90 % of tin,not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium,for use in the electro technical industry	0 %	—	31.12.2023
0.4510	ex38111900	10	Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:4,9 % of 1,2,4-trimethyl-benzene,4,9 % of naphthalene, and0,5 % of 1,3,5-trimethyl-benzene	0 %	—	31.12.2024
0.3448	ex38112100	10	Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils	0 %	—	31.12.2023
0.7223	ex38112100	11	Dispersing agent and oxidation inhibitor containing:o-amino polyisobutylenephenol (CAS RN 78330-13-9),more than 30 % by weight but not more than 50 % by weight of mineral oils,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2021
0.6904	ex38112100	12	Dispersing agent containing :esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),35 % or more but not more than 55 % by weight of mineral oils, andwith a chlorine content of not more than 0,05 % by weight,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2025
0.6018	ex38112100	13	Additives containing:borated magnesium (C16-C24) alkylbenzene sulphonates, andmineral oils,having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.6906	ex38112100	14	Dispersing agent :containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),containing 35 % or more but not more than 55 % by weight of mineral oils,with a chlorine content by weight of not more than 0,05 %,having a total base number of less than 15,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2025
0.6907	ex38112100	16	Detergent containing :Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)40 % or more but not more than 60 % by weight of mineral oils andhaving a total base number more than 120used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2025
0.6905	ex38112100	18	Detergent containing :long chain alkyltoluene calcium sulphonates,more than 30 % but not more than 50 % by weight of mineral oils, andhaving a total base number of more than 310 but not more than 340,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2025
0.6430	ex38112100	19	Additives containing:a polyisobutylene succinimide based mixture, andmore than 30 % but not more than 50 % by weight of mineral oils,having a total base number of more than 40, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.3449	ex38112100	20	Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil	0 %	—	31.12.2023
0.6012	ex38112100	25	Additives containing:a (C8-18) alkyl polymethacrylate copolymer with N‐[3‐(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10000 but not more than 20000, andmore than 15 %, but not more than 30 % by weight of mineral oils,for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.6022	ex38112100	27	Additives containing:10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, andmineral oils,for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.5717	ex38112100	30	Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
0.6013	ex38112100	33	Additives containing:calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), andmineral oils,having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils	0 %	—	31.12.2024
0.6016	ex38112100	37	Additives containing:a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, andmore than 50 % but not more than 75 % by weight of mineral oils,for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.6435	ex38112100	48	Additives containingoverbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9), andby weight more than 25 % but not more than 50 % of mineral oils,having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.5727	ex38112100	50	Additives for lubricating oils,based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),containing mineral oils,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
0.6437	ex38112100	53	Additives containing:overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 %, andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.6434	ex38112100	55	Additives containing:low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.5724	ex38112100	60	Additives for lubricating oils, containing mineral oils:based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
0.6431	ex38112100	63	Additives containing:an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 %, andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.6429	ex38112100	65	Additives containing:a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), andmore than 35 % but not more than 50 % by weight of mineral oils,having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.5711	ex38112100	70	Additives for lubricating oils:containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605‐20‐9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
0.6017	ex38112100	73	Additives containing:borated succinimide compounds (CAS RN 134758‐95‐5),mineral oils, andhaving a total base number (TBN) greater than 40,for use in the manufacture of additive mixtures for lubricating oils	0 %	—	31.12.2023
0.6671	ex38112100	75	Additives containing:Calcium (C10-C14) dialkylbenzenesulfonates,more than 40 %, but not more than 60 % by weight of mineral oils,with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2022
0.6669	ex38112100	77	Antifoam additives consisting of:a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, andmore than 50 % but not more than 80 % by weight of mineral oils,for use in the manufacture of additive blends for lubricating oils	0 %	—	31.12.2022
0.6666	ex38112100	80	Additives containing :polyisobutylene aromatic polyamine succinimide,more than 40 % but not more than 60 % by weight of mineral oils,with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils	0 %	—	31.12.2022
0.6498	ex38112100	83	Additives containing:polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),more than 31,9 % but not more than 43,3 % by weight of mineral oils,not more than 0,05 % by weight chlorine, andhaving a total base number (TBN) greater than 20,for use in the manufacture of additives blends for lubricating oils	0 %	—	31.12.2024
0.5718	ex38112100	85	Additives:containing more than 20 % or more but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,for use in the manufacture of blends of additives	0 %	—	31.12.2022
0.6438	ex38112900	15	Additives containing:products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9), andmore than 15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent,for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.7512	ex38112900	18	Additives consisting of dihydroxy butanedioic acid – (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils	0 %	—	31.12.2023
0.5721	ex38112900	20	Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils	0 %	—	31.12.2022
0.6432	ex38112900	25	Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils or greases	0 %	—	31.12.2024
0.5723	ex38112900	30	Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
0.6433	ex38112900	35	Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.5728	ex38112900	40	Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils	0 %	—	31.12.2022
0.6436	ex38112900	45	Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.5719	ex38112900	50	Additives for lubricating oils, consisting of a mixture of N,N‐dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
0.6668	ex38112900	65	Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2022
0.6020	ex38112900	70	Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.7205	ex38112900	75	Oxidation inhibitor mainly containing a mixture of isomers of 1‐(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2021
0.6021	ex38112900	80	Additives containing:more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), andmore than 15 % by weight of 5-(tert-nonyldithio)-1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.6023	ex38112900	85	Additives consisting of a mixture of 3‐((C9‐11)‐isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10‐rich (CAS RN 398141‐87-2), for use in the manufacture of lubricating oils	0 %	—	31.12.2024
0.3730	ex38119000	10	Dinonylnaphthylsulphonic acid salt, in a mineral oil solution	0 %	—	31.12.2023
0.5565	ex38119000	40	Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol	0 %	—	31.12.2022
0.7204	ex38119000	50	Corrosion inhibitor containing:polyisobutenyl succinic acid, andmore than 5 % and not more than 20 % by weight of mineral oils,for use in the manufacture of blends of additives for fuels	0 %	—	31.12.2021
0.5147	ex38121000	10	Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)	0 %	—	31.12.2021
0.6045	ex38122090	10	Plasticiser, containing:bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2),more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)	0 %	—	31.12.2023
0.3444	ex38123990	20	Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate	0 %	—	31.12.2023
0.6055	ex38123990	25	UV photo stabiliser containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2),α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1),polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3),bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), andmethyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)	0 %	—	31.12.2023
0.3446	ex38123990	30	Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol	0 %	—	31.12.2024
0.6054	ex38123990	35	Mixture containing by weight:25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403‐32-9),not more than 20 % of other organic compounds,on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)	0 %	—	31.12.2023
0.4861	ex38123990	40	Mixture of:80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), and20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3)	0 %	—	31.12.2023
0.5477	ex38123990	55	UV-stabilizer, containing:2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6), andeither N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), orN,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)	0 %	—	31.12.2021
0.5483	ex38123990	65	Stabiliser for plastic material containing:2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)	0 %	—	31.12.2021
0.5372	ex38123990	70	Light stabiliser containing:branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and1-methoxy-2-propyl acetate (CAS RN 108-65-6)	0 %	—	31.12.2021
0.5822	ex38123990	80	UV-stabilizer, consisting of:a hindered amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), andeither an o-hydroxyphenyl triazine UV light absorber, ora chemically modified phenolic compound	0 %	—	31.12.2022
0.3441	ex38140090	20	Mixture containing by weight:69 % or more but not more than 71 % of 1‐methoxypropan-2-ol (CAS RN 107-98-2),29 % or more but not more than 31 % of 2‐methoxy‐1‐methylethyl acetate (CAS RN 108-65-6)	0 %	—	31.12.2023
0.3731	ex38140090	40	Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether	0 %	—	31.12.2023
0.2800	ex38151200	10	Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver	0 %	—	31.12.2023
0.7574	ex38151200	20	Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with:a diameter of 1,4 mm or more but not more than 2,0 mm, anda platinum content by weight of 0,2 % or more but not more than 0,5 %	0 %	—	31.12.2023
0.7585	ex38151200	30	Catalyst:containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals,deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide,the honeycomb structure having:a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight,62 cells per cm2 or more, but not more than 140 cells per cm2,a diameter of 100 mm or more, but not more than 120 mm, anda length of 60 mm or more, but not more than 150 mm,for use in the production of motor vehicles	0 %	—	31.12.2023
0.5508	ex38151990	10	Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)	0 %	—	31.12.2021
0.7064	ex38151990	13	Catalyst consisting of:chromium trioxide (CAS RN 1333-82-0),dichromium trioxide (CAS RN 1308-38-9),on a support of aluminium oxide (CAS RN 1344-28-1)	0 %	—	31.12.2021
0.2799	ex38151990	15	Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile	0 %	—	31.12.2023
0.2798	ex38151990	20	Catalyst:in the form of solid spheres,of a diameter of 4 mm or more but not more than 12 mm, andconsisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,for use in the manufacture of acrylic acid	0 %	—	31.12.2023
0.6049	ex38151990	25	Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde	0 %	—	31.12.2023
0.3435	ex38151990	30	Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene	0 %	—	31.12.2023
0.7566	ex38151990	35	Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a support of silicon dioxide in the form of a powder	0 %	—	31.12.2023
0.2792	ex38151990	65	Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide	0 %	—	31.12.2023
0.2791	ex38151990	70	Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide	0 %	—	31.12.2023
0.2790	ex38151990	75	Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide	0 %	—	31.12.2023
0.2793	ex38151990	80	Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil	0 %	—	31.12.2023
0.2788	ex38151990	85	Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder	0 %	—	31.12.2023
0.3899	ex38151990	86	Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins	0 %	—	31.12.2023
0.4005	ex38159090	16	Initiator based on dimethylaminopropyl urea	0 %	—	31.12.2022
0.5704	ex38159090	18	Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO')-, di[chloride(1-)] (CAS RN 1217890-37-3), used to accelerate chemical oxidation or bleaching	0 %	—	31.12.2022
0.7528	ex38159090	25	Catalyst consisting by weight of:30 % or more but not more than 33 % of bis(4‐(diphenylsulphonio)phenyl)sulphide bis(hexafluorophosphate) (CAS RN 74227-35-3), and24 % or more but not more than 27 % of diphenyl(4‐phenylthio)phenylsuphonium hexafluorophosphate (CAS RN 68156-13-8),in propylene carbonate (CAS RN 108-32-7)	0 %	—	31.12.2023
0.5062	ex38159090	30	Catalyst, consisting of a suspension in mineral oil of:tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, andsilicon dioxide,containing 6,6 % (± 0,6 %) by weight of magnesium, andcontaining 2,3 % (± 0,2 %) by weight of titanium	0 %	—	31.12.2025
0.7526	ex38159090	35	Catalyst containing by weight:25 % or more but not more than 27,5 % of bis[4‐(diphenylsuphonio)phenyl]sulphide bis(hexafluoroantimonate) (CAS RN 89452-37-9), and20 % or more but not more than 22,5 % of diphenyl(4‐phenylthio)phenylsufonium hexafluoroantimonate (CAS RN 71449-78-0),in propylene carbonate (CAS RN 108-32-7)	0 %	—	31.12.2023
0.7998	ex38159090	38	Photoinitiator, containing by weight:80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate	0 %	—	31.12.2025
0.6006	ex38159090	40	Catalyst:containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm,for use in the manufacture of acrylic acid	0 %	—	31.12.2023
0.7243	ex38159090	43	Catalyst in powder form consisting by weight of:92,50 % (± 2) % titanium dioxide (CAS RN 13463‐67‐7),5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and2,5 % (±1,5) % sulphur trioxide (CAS RN 7446-11-9)	0 %	—	31.12.2022
0.7999	ex38159090	48	Photoinitiator containing by weight:88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)	0 %	—	31.12.2025
0.3433	ex38159090	50	Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium	0 %	—	31.12.2023
0.2783	ex38159090	80	Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol	0 %	—	31.12.2025
0.3430	ex38159090	81	Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2‐ethylhexanoate	0 %	—	31.12.2023
0.2782	ex38159090	85	Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins	0 %	—	31.12.2022
0.2909	ex38159090	86	Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide	0 %	—	31.12.2023
0.3732	ex38159090	88	Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:4 % or more but not more than 10 % of titanium, and10 % or more but not more than 20 % magnesium	0 %	—	31.12.2023
0.3733	ex38159090	89	Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile	0 %	—	31.12.2021
0.4408	ex38170050	10	Mixture of alkylbenzenes (C14-26) containing by weight:35 % or more but not more than 60 % of eicosylbenzene,25 % or more but not more than 50 % of docosylbenzene,5 % or more but not more than 25 % of tetracosylbenzene	0 %	—	31.12.2023
0.3427	ex38170080	10	Mixture of alkylnaphthalenes, containing by weight:88 % or more but not more than 98 % of hexadecylnaphthalene2 % or more but not more than 12 % of dihexadecylnaphthalene	0 %	—	31.12.2023
0.4581	ex38170080	20	Mixture of branched alkyl benzenes mainly containing dodecyl benzenes	0 %	—	31.12.2023
0.5479	ex38170080	30	Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms	0 %	—	31.12.2021
0.4006	ex38190000	20	Fire resistant hydraulic fluid based on phosphate ester	0 %	—	31.12.2023
0.7922	ex38231910	20	12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters	0 %	—	31.12.2024
0.6038	ex38231930ex38231930	2030	Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 2309	0 %	—	31.12.2023
0.6037	ex38231990ex38231990	2030	Palm acid oils from refining for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 2309	0 %	—	31.12.2023
0.7756	ex38247890	05	Mixture of halogenated derivatives containing by weight:30 % or more but not more than 60 % of difluoromethane (CAS RN 75-10-5),30 % or more but not more than 60 % of trifluoroiodomethane (CAS RN 2314-97-8),10 % or more but not more than 30 % of pentafluoroethane (CAS RN 354-33-6)	0 %	—	31.12.2024
0.2908	ex38249915	10	Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets	0 %	—	31.12.2023
0.6810	ex38249992	23	Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol	0 %	—	31.12.2025
0.7222	ex38249992	25	Preparation containing by weight:25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8),25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1),10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0),1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6),1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8),not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)	3,2 %	—	31.12.2020
0.7321	ex38249992	26	Preparation containing by weight:60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742‐94-5),15 % or more but not more than 25 % of 4‐(4‐nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and10 % or more but not more than 15 % of 2‐sec‐butylphenol (CAS RN 89-72-5)	0 %	—	31.12.2022
0.7224	ex38249992	27	4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent	0 %	—	31.12.2021
0.6778	ex38249992	28	Aqueous solution containing by weight:10 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),10 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9), and0,5 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)	0 %	—	31.12.2020
0.4909	ex38249992	29	Preparation containing by weight:85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate	0 %	—	31.12.2025
0.7215	ex38249992	30	Aqueous solution of caesium formate and potassium formate containing by weight:1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), andwhether or not containing not more than 9 % of additives	0 %	—	31.12.2021
0.7618	ex38249992	31	Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules	0 %	—	31.12.2023
0.4707	ex38249992	32	Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)	0 %	—	31.12.2024
0.3083	ex38249992ex38249993ex38249996	334040	Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:on a support of mineral wax, whether or not modified chemically, orin the form of a solution in an organic solvent	0 %	—	31.12.2023
0.4153	ex38249992	35	Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate	0 %	—	31.12.2023
0.4083	ex38249992	36	Calcium phosphonate phenate, dissolved in mineral oil	0 %	—	31.12.2021
0.4523	ex38249992	37	Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085‐02-4)	0 %	—	31.12.2023
0.7722	ex38249992	38	Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)	0 %	—	31.12.2024
0.4152	ex38249992	39	Preparation containing not less than 47 % by weight of 1,3:2,4‐bis-O-benzylidene-D-glucitol	0 %	—	31.12.2023
0.6779	ex38249992	40	Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent	0 %	—	31.12.2025
0.6091	ex38249992	42	Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene	0 %	—	31.12.2023
0.7724	ex38249992	43	Preparation containing by weight:65 % or more, but not more than 95 % of isopropylated triaryl phosphate (CAS RN 68937-41-7), and5 % or more, but not more than 35 % of triphenyl phosphate (CAS RN 115-86-6)	0 %	—	31.12.2024
0.3067	ex38249992	45	Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors	0 %	—	31.12.2023
0.6068	ex38249992	46	Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran	0 %	—	31.12.2020
0.5475	ex38249992	47	Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2), andtrihexylphosphine oxide (CAS RN 3084-48-8)	0 %	—	31.12.2022
0.4279	ex38249992	49	Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)	0 %	—	31.12.2022
0.4292	ex38249992	50	Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses	0 %	—	31.12.2022
0.3065	ex38249992	51	Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid	0 %	—	31.12.2023
0.7742	ex38249992	52	Electrolyte containing:5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),for use in the manufacture of motor vehicle batteries	3.2 %	—	31.12.2021
0.3061	ex38249992	53	Preparations consisting predominantly of ethylene glycol and:either diethylene glycol, dodecanedioic acid and ammonia water,or N,N-dimethylformamide,or γ-butyrolactone,or silicon oxide,or ammonium hydrogen azelate,or ammonium hydrogen azelate and silicon oxide,or dodecanedioic acid, ammonia water and silicon oxide,for the manufacture of electrolytic capacitors	0 %	—	31.12.2023
0.4434	ex38249992	54	Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)	0 %	—	31.12.2021
0.6025	ex38249992	55	Additives for paints and coatings, containing:a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4‐(1,1‐dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and30 % or more but not more than 35 % by weight of isobutyl alcohol	0 %	—	31.12.2023
0.4431	ex38249992	56	Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units	0 %	—	31.12.2024
0.4425	ex38249992	57	Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units	0 %	—	31.12.2024
0.6067	ex38249992	59	Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran	0 %	—	31.12.2023
0.5043	ex38249992	60	N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %	0 %	—	31.12.2020
0.5050	ex38249992	61	3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine	0 %	—	31.12.2025
0.7831	ex38249992	62	Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane	0 %	—	31.12.2024
0.5169	ex38249992	64	Preparation containing by weight:89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol,0,1 % or more but not more than 1 % of colourants,1 % or more but not more than 10 % of fluoropolymers	0 %	—	31.12.2021
0.3122	ex38249992	65	Mixture of primary tert-alkylamines	0 %	—	31.12.2024
0.6720	ex38249992	68	Preparation containing by weight:20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)Dissolved in:10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)	0 %	—	31.12.2025
0.6719	ex38249992	69	Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) andnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)	0 %	—	31.12.2021
0.4409	ex38249992	70	Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine	0 %	—	31.12.2024
0.6198	ex38249992	72	N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)	0 %	—	31.12.2023
0.6114	ex38249992	76	Preparation containing:74 % or more but not more than 90 % by weight of (S)‐α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4), and10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)	0 %	—	31.12.2023
0.5834	ex38249992	80	Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)	0 %	—	31.12.2022
0.6546	ex38249992	82	T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene	0 %	—	31.12.2024
0.3074	ex38249992	84	Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:either an aluminium-alkyl compound, oran organic complex of tungsten, oran organic complex of molybdenum	0 %	—	31.12.2023
0.3069	ex38249992	88	2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)	0 %	—	31.12.2025
0.8083	ex38249992	92	Solution consisting of:50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)	0 %	—	31.12.2025
0.8121	ex38249992	93	Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives	3.2 %	—	31.12.2021
0.5961	ex38249993	30	Powder Mixture containing by weight:85 % or more of zinc diacrylate (CAS RN 14643-87-9),not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), andnot more than 10 % of zinc stearate (CAS RN 557-05-1)	0 %	—	31.12.2024
0.4719	ex38249993	35	Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)	0 %	—	31.12.2024
0.7379	ex38249993	38	Mixture of 4,4'-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4'-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9)	0 %	—	31.12.2022
0.4527	ex38249993	42	Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea	0 %	—	31.12.2023
0.7153	ex38249993	45	Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:not more than 20 % of disodium sulphate, andnot more than 10 % of sodium chloride	0 %	—	31.12.2021
0.7786	ex38249993	48	Nonhalogenated flame retardant containing by weight:50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034-17-1),35 % or more, but not more than 45 % of a phosphoric acid derivative, andnot more than 6 % of zinc oxide (CAS RN 1314-13-2)	0 %	—	31.12.2024
0.7063	ex38249993	50	Preparation, consisting of acesulfame potassium (CAS RN 55589-62-3) and potassium hydroxide (CAS RN 1310-58-3)	0 %	—	31.12.2021
0.8062	ex38249993	51	Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more	0 %	—	31.12.2025
0.6215	ex38249993	53	Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder	0 %	—	31.12.2023
0.6997	ex38249993	55	Mixture containing by weight:70 % or more, but not more than 90 % of (S)‐indoline‐2‐carboxylic acid (CAS RN 79815-20-6), and10 % or more, but not more than 30 % of o‐chlorocinnamic acid (CAS RN 3752-25-8)	0 %	—	31.12.2021
0.7497	ex38249993	60	Mixture of phytosterols (CAS RN 949109-75-5) in powder form containing by weight:40 % or more but not more than 88 % of sitosterols,20 % or more but not more than 63 % of campesterols,14 % or more but not more than 38 % of stigmasterols,not more than 13 % brassicasterols, andnot more than 5 % sitostanols	0 %	—	31.12.2023
0.4290	ex38249993	63	Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters	0 %	—	31.12.2022
0.7460	ex38249993	65	Reaction mass of 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene	0 %	—	31.12.2023
0.3117	ex38249993	70	Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)	0 %	—	31.12.2024
0.3112	ex38249993	75	Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols	0 %	—	31.12.2024
0.5817	ex38249993ex38249996	8385	Preparation containing:C,C'-azodi(formamide) (CAS RN 123-77-3),magnesium oxide (CAS RN 1309-48-4), andzinc bis(p-toluene sulphinate) (CAS RN 24345-02-6),in which the gas formation from C,C'-azodi(formamide) occurs at 135 °C	0 %	—	31.12.2023
0.3049	ex38249993ex38249996	8557	Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges	0 %	—	31.12.2023
0.4336	ex38249993	88	Mixture of phytosterols containing by weight:60 % or more, but not more than 80 % of sitosterols,less than 15 % of campesterols,less than 5 % of stigmasterols, andless than 15 % of betasitostanols	0 %	—	31.12.2022
0.7420	ex38249996	30	Rare-earth concentrate containing by weight:20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3),2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8),10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), andnot more than 65 % of zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide	0 %	—	31.12.2022
0.7611	ex38249996	33	Buffer cartridge not exceeding 8000 ml containing:0,05 % or more but not more than 0,1 % by weight of 5‐Chloro-2-methyl-2,3-dihydroisothiazol-3-one (CAS RN 55965-84-9), and0,05 % or more but not more that 0,1 % by weight of 2‐Methyl-2,3-dihydroisothiazol-3-one (CAS RN 2682‐20-4) as a biostatic	0 %	—	31.12.2023
0.3078	ex38249996	35	Calcined bauxite (refractory grade)	0 %	—	31.12.2023
0.4542	ex38249996	37	Structured silica alumina phosphate	0 %	—	31.12.2024
0.7313	ex38249996	45	Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:a particle size of less than 10 μm,a purity by weight of more than 98 %	3.2 %	—	31.12.2021
0.6628	ex38249996	46	Manganese zinc ferrite granulate, containing by weight:52 % or more but not more than 76 % of iron(III)oxide,13 % or more but not more than 42 % of manganese oxide, and2 % or more but not more than 22 % of zinc oxide	0 %	—	31.12.2025
0.3064	ex38249996	47	Mixed metals oxides, in the form of powder, containing by weight:either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,or 30 % or more of lead and 5 % or more of niobium,for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors	0 %	—	31.12.2023
0.6749	ex38249996	48	Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %	0 %	—	31.12.2025
0.5607	ex38249996	50	Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators	0 %	—	31.12.2022
0.6145	ex38249996	55	Carrier in powder form, consisting of:ferrite (Iron oxide) (CAS RN 1309-37-1),manganese oxide (CAS RN 1344-43-0),magnesium oxide (CAS RN 1309-48-4),styrene acrylate copolymer,to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers	0 %	—	31.12.2023
0.5141	ex38249996	60	Fused magnesia containing by weight 15 % or more of dichromium trioxide	0 %	—	31.12.2021
0.3050	ex38249996	65	Aluminium sodium silicate, in the form of spheres of a diameter of:either 1,6 mm or more but not more than 3,4 mm, or4 mm or more but not more than 6 mm	0 %	—	31.12.2023
0.8122	ex38249996	68	Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight:less than 5 % of lithium hydroxide (CAS RN 1310-65-2),less than 5 % of lithium carbonate (CAS RN 554-13-2), andless than 15 % of nickel oxide (CAS RN 11099-02-8)	3.2 %	—	31.12.2021
0.7212	ex38249996	70	Powder containing by weight:28 % or more but not more than 51 % of talc (CAS RN 14807-96-6),30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7),17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)	0 %	—	31.12.2021
0.3119	ex38249996	73	Reaction product, containing by weight:1 % or more but not more than 40 % of molybdenum oxide,10 % or more but not more than 50 % of nickel oxide,30 % or more but not more than 70 % of tungsten oxide	0 %	—	31.12.2024
0.7010	ex38249996	74	Mixture with a non-stoichiometric composition:with a crystalline structure,with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm	0 %	—	31.12.2021
0.7147	ex38249996	80	Mixture consisting of:64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9),25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3), andnot more than 1 % by weight of 3‐(2,3‐epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)	0 %	—	31.12.2021
0.7553	ex38249996	83	Cubic Boron nitride (CAS RN 10043-11-5) coated with nickel and/or nickelphosphide (CAS RN 12035-64-2)	0 %	—	31.12.2023
0.5820	ex38249996	87	Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:0,1 % or more but not more than 1 % of platinum, and0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)	0 %	—	31.12.2022
0.5939	ex38260010ex38260010	2029	Mixture of fatty acid methyl esters containing by weight at least:65 % or more but not more than 75 % of C12 FAME,21 % or more but not more than 28 % of C14 FAME,4 % or more but not more than 8 % of C16 FAME,for use in the manufacture of detergents and home and personal care products	0 %	—	31.12.2023
0.5941	ex38260010ex38260010	5059	Mixture of fatty acid methyl esters containing by weight at least:50 % or more but not more than 58 % of C8-FAME,35 % or more but not more than 50 % of C10-FAME,for the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid	0 %	—	31.12.2023
0.6132	ex39011010ex39014000	2010	High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with:a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min, anda density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, anda vicat softening temperature of min. 94 °C	0 %	m3	31.12.2024
0.5142	ex39011090	30	Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper	0 %	—	31.12.2021
0.6953	ex39014000	20	Octene linear low-density polyethylene (LLDPE) in the form of pellets with:10 % or more but not more than 20 % by weight of octene,a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),a melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,a gel area per 24,6 cm3 of not more than 20 mm2, andan anti-oxidant level of not more than 240 ppm	0 %	m3	31.12.2020
0.6897	ex39014000	30	Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:more than 10 % but not more than 20 % by weight of copolymer,a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, anda density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,for use in the co-extrusion processing of films for flexible food packaging	0 %	m3	31.12.2025
0.5092	ex39014000	40	Block copolymer of ethylene with octene in the form of pellets:with a specific gravity of 0,862 or more, but not more than 0,865,able to stretch to at least 200 % its original length,with a hysteresis of 50 % (±10 %),with permanent deformation of not more than 20 %,for use in the manufacture of napkin liners for babies	0 %	—	31.12.2020
0.6920	ex39019080	53	Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), anda melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238)	0 %	m3	31.12.2025
0.6734	ex39019080	55	Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:an acrylic acid content of 6 % or more but not more than 50 % by weight, anda melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)	0 %	—	31.12.2025
0.5049	ex39019080	67	Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more	0 %	—	31.12.2025
0.6731	ex39019080	70	Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)	0 %	—	31.12.2020
0.6998	ex39019080	73	Mixture containing by weight:80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1), and6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)	0 %	—	31.12.2021
0.2902	ex39019080	91	Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid	0 %	—	31.12.2023
0.3906	ex39019080	92	Chlorosulphonated polyethylene	0 %	—	31.12.2023
0.2899	ex39019080	93	Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets	0 %	—	31.12.2023
0.3186	ex39019080	94	Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene	0 %	—	31.12.2023
0.2898	ex39019080	97	Chlorinated polyethylene, in the form of powder	0 %	—	31.12.2023
0.2895	ex39021000	20	Polypropylene, containing no plasticiser:of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),of a heat of fusion of 15 J/g or more but not more than 70 J/g,of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)	0 %	—	31.12.2023
0.4591	ex39021000	40	Polypropylene, containing no plasticiser:of a tensile strength: of 32-77 MPa (as determined by the ASTM D638 method),of a flexural strength of 50-105 MPa (as determined by the ASTM D790 method),of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5‐15 g/10 min (as determined by the ASTM D1238 method),with 40 % or more but not more than 80 % by weight of polypropylene,with 10 % or more but not more than 30 % by weight of glass fibre,with 10 % or more but not more than 30 % by weight of mica	0 %	—	31.12.2024
0.3180	ex39022000	10	Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800	0 %	—	31.12.2023
0.3179	ex39022000	20	Hydrogenated polyisobutene, in liquid form	0 %	—	31.12.2023
0.8125	ex39023000	20	Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene	0 %	—	31.12.2025
0.3181	ex39023000	91	A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39	0 %	—	31.12.2023
0.5143	ex39023000	95	A-B-A block copolymer, consisting of:a copolymer of propylene and ethylene, and21 % (± 3 %) by weight of polystyrene	0 %	—	31.12.2021
0.5138	ex39023000	97	Liquid ethylene-propylene-copolymer with:a flashpoint of 250 °C or more,a viscosity index of 150 or more,of a number average molecular weight (Mn) of 650 or more	0 %	—	31.12.2021
0.4424	ex39029090	52	Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin	0 %	—	31.12.2023
0.4509	ex39029090	55	Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene	0 %	—	31.12.2023
0.4768	ex39029090	60	Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:liquid at room temperature,obtained by cationic polymerisation of C-5 alkenes monomers,with a number average molecular weight (Mn) of 370 (± 50),with a weight average molecular weight (Mw) of 500 (± 100)	0 %	—	31.12.2024
0.7950	ex39029090	65	Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39	0 %	—	31.12.2025
0.2900	ex39029090	92	Polymers of 4-methylpent-1-ene	0 %	—	31.12.2023
0.6214	ex39029090	94	Chlorinated polyolefins, whether or not in a solution or dispersion	0 %	—	31.12.2023
0.4040	ex39029090	98	Synthetic poly-alpha-olefin with a viscosity at 100° Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene	0 %	—	31.12.2021
0.4166	ex39031900	40	Crystalline polystyrene with:a melting point of 268 °C or more but not more than 272 °C,a setting point of 232 °C or more but not more than 247 °C,whether or not containing additives and filling material	0 %	—	31.12.2021
0.5175	ex39039090	15	Copolymer in the form of granules containing by weight:78 (± 4 %) of styrene,9 (± 2 %) of n-butyl acrylate,11 (± 3 %) of n-butyl methacrylate,1,5 (±0,7 %) of methacrylic acid, and0,01 % or more but not more than 2,5 % of polyolefinic wax	0 %	—	31.12.2023
0.5176	ex39039090	20	Copolymer in the form of granules containing by weight:83 ± 3 % styrene,7 ± 2 % n-butyl acrylate,9 ± 2 % n-butyl methacrylate, and0,01 % or more but not more than 1 % of polyolefinic wax	0 %	—	31.12.2021
0.5168	ex39039090	25	Copolymer in the form of granules containing by weight:82 ± 6 % styrene,13,5 ± 3 % n-butyl acrylate,1 ±0,5 % methacrylic acid, and0,01 % or more but not more than 8,5 % of polyolefinic wax	0 %	—	31.12.2021
0.7861	ex39039090	33	Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more	0 %	—	31.12.2024
0.2891	ex39039090ex39119099	3543	Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 oC	0 %	—	31.12.2023
0.7417	ex39039090ex39046980	3888	Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)	0 %	—	31.12.2022
0.6565	ex39039090	45	Preparation, in form of powder, containing by weight:86 % or more but not more than 90 % of styrene‐acrylic-copolymer, and9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)	0 %	m3	31.12.2024
0.6780	ex39039090	46	Copolymer in the form of granules containing by weight:74 % (± 4 %) styrene,24 % (± 2 %) n-butylacrylate, and0,01 % or more but not more than 2 % methacrylic acid	0 %	m3	31.12.2020
0.5473	ex39039090ex39119099	6060	Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form	0 %	—	31.12.2021
0.6736	ex39039090	65	Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)	0 %	—	31.12.2025
0.6804	ex39039090	70	Copolymer in the form of granules containing by weight:75 % (± 7 %) styrene and25 % (± 7 %) methylmethacrylate	0 %	m3	31.12.2025
0.3910	ex39039090	80	Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:minimum 65 % styrene,maximum 25 % divinylbenzene,for use in the manufacture of ion exchange resins	0 %	—	31.12.2023
0.4410	ex39039090	86	Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene,35 % or more but not more than 45 % of poly(phenylene ether),not more than 10 % of other additives,and with one or more of the following special colour effects:metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment,fluorescent, as characterized by emitting light during absorption of ultraviolet radiation,bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale	0 %	—	31.12.2023
0.2887	ex39043000ex39044000	3091	Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:87 % or more but not more than 92 % of vinyl chloride,2 % or more but not more than 9 % of vinyl acetate, and1 % or more but not more than 8 % of vinyl alcohol,in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink	0 %	—	31.12.2023
0.2885	ex39046100	20	Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions	0 %	—	31.12.2023
0.7675	ex39046980	20	Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)	0 %	—	31.12.2023
0.7626	ex39046980	30	Copolymer of tetrafluoroethylene, hexafluoropropene and ethene	0 %	—	31.12.2023
0.4981	ex39046980	81	Poly(vinylidene fluoride) (CAS RN 24937-79-9)	0 %	—	31.12.2025
0.5560	ex39046980	85	Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder form, whether or not with fillers	0 %	—	31.12.2022
0.3285	ex39046980	94	Copolymer of ethylene and tetrafluoroethylene	0 %	—	31.12.2023
0.2883	ex39046980	96	Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39	0 %	—	31.12.2023
0.3745	ex39046980	97	Copolymer of chlorotrifluoroethylene and vinylidene difluoride	0 %	—	31.12.2024
0.5786	ex39053000	10	Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors	0 %	—	31.12.2022
0.5774	ex39059100	40	Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene	0 %	—	31.12.2022
0.8126	ex39059100	50	Aqueous solution consisting by weight of:10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),not more than 1 % preservatives	0 %	—	31.12.2025
0.8145	ex39059100	60	Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:27 % or more but not more than 33 % of copolymer,not more than 1,5 % of ethanol (CAS RN 64-17-5),not more than 1 % of preservatives	0 %	—	31.12.2025
0.8138	ex39059100	70	Aqueous solution, containing by weight:25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)	0 %	—	31.12.2025
0.8139	ex39059100	80	Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)	0 %	—	31.12.2025
0.3283	ex39059990	95	Hexadecylated or eicosylated polyvinylpyrrolidone	0 %	—	31.12.2023
0.2880	ex39059990	96	Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol	0 %	—	31.12.2023
0.3282	ex39059990	97	Povidone (INN)-iodine (CAS RN 25655-41-8)	0 %	—	31.12.2023
0.3278	ex39059990	98	Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups	0 %	—	31.12.2023
0.3276	39069060		Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide	0 %	—	31.12.2023
0.3279	ex39069090	10	Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004	0 %	—	31.12.2023
0.7347	ex39069090	23	Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm	0 %	—	31.12.2022
0.5814	ex39069090	27	Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate	0 %	—	31.12.2022
0.6672	ex39069090	33	Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm	0 %	—	31.12.2025
0.6663	ex39069090	37	Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm	0 %	—	31.12.2025
0.4908	ex39069090	40	Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:a viscosity of not more than 50000 Pa·s at 120 °C as determined by the test method ASTM D 3835,a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,a residual monomer content of less than 1 %	0 %	—	31.12.2020
0.4667	ex39069090	41	Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30	0 %	—	31.12.2024
0.7125	ex39069090	43	Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)	0 %	—	31.12.2021
0.2886	ex39069090	50	Polymers of esters of acrylic acid with one or more of the following monomers in the chain:chloromethyl vinyl ether,chloroethyl vinyl ether,chloromethylstyrene,vinyl chloroacetate,methacrylic acid,butenedioic acid monobutyl ester,butenedioic acid monocyclohexyl ester,containing by weight not more than 5 % of each monomer unit	0 %	—	31.12.2023
0.7131	ex39069090	53	Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260°C, containing by weight:75 % or more but not more than 85 % of polyacrylamide, and15 % or more but not more than 25 % of polyethylene glycol	0 %	—	31.12.2021
0.7499	ex39069090	60	Aqueous dispersion containing by weight:more than 10 % but not more than 15 % of ethanol, andmore than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate‐co‐divinylbenzene) with a glycerol derivative	0 %	—	31.12.2023
0.6425	ex39069090	73	Preparation containing by weight:33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer,24 % or more but not more than 28 % of propylene glycol, and37 % or more but not more than 41 % of water	0 %	—	31.12.2024
0.6890	ex39071000	10	Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene	0 %	—	31.12.2020
0.6891	ex39071000	20	Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine	0 %	—	31.12.2022
0.3272	ex39072011	10	Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more	0 %	—	31.12.2023
0.4378	ex39072011	20	Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40000	0 %	—	31.12.2023
0.5379	ex39072011	60	Preparation containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2), andα-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)	0 %	—	31.12.2021
0.5862	ex39072020	20	Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1)	0 %	—	31.12.2022
0.7099	ex39072020	25	Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight:48 % or more but not more than 52 % of propylene oxide, and48 % or more but not more than 52 % of butylene oxide	0 %	—	31.12.2021
0.2876	ex39072020	30	Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone	0 %	—	31.12.2023
0.7532	ex39072020	35	Mixture containing by weight:5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)	0 %	—	31.12.2023
0.4013	ex39072020	40	Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3600	0 %	—	31.12.2023
0.6351	ex39072020ex39072099	5075	Poly(p-phenylene oxide) in the form of powderwith a glasstransitiontemperature of 210 °C,with a weight average molecular weight (Mw) of 35000 or more but not more than 80000,with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram	0 %	—	31.12.2024
0.7308	ex39072020	60	Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium	0 %	—	31.12.2022
0.3271	ex39072099	15	Poly(oxypropylene) having alkoxysilyl end-groups	0 %	—	31.12.2023
0.7478	ex39072099	20	2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide	0 %	—	31.12.2023
0.2920	ex39072099	30	Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)	0 %	—	31.12.2023
0.7484	ex39072099	40	N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa	0 %	—	31.12.2023
0.3269	ex39072099	45	Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups	0 %	—	31.12.2023
0.4536	ex39072099	50	Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient	0 %	—	31.12.2023
0.4546	ex39072099	55	Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5000	0 %	—	31.12.2023
0.5144	ex39072099	60	Polytetramethylene oxide di-p-aminobenzoate	0 %	—	31.12.2021
0.6839	ex39073000	15	Epoxide resin, halogen-free,containing by weight more than 2 % phosphorous calculated on the solid content, chemically bound in the epoxide resin,not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, andcontaining solvents,for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits	0 %	—	31.12.2025
0.6840	ex39073000	25	Epoxide resincontaining by weight 21 % or more of brome,not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, andcontaining solvents	0 %	—	31.12.2025
0.2759	ex39073000ex39269097	4070	Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548	0 %	—	31.12.2023
0.5578	ex39073000	60	Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)	0 %	—	31.12.2022
0.7427	ex39073000	70	Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), andnone or not more than 0,5 % of carbon black (CAS RN 1333-86-4)	0 %	—	31.12.2022
0.2541	ex39074000	35	α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)	0 %	—	31.12.2023
0.2564	ex39074000	45	α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)	0 %	—	31.12.2023
0.6352	ex39074000	70	Polycarbonate of phosgene and bisphenol A:containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,with p-cumylphenol endcaps, andwith a weight average molecular weight (Mw) of 29900 or more but not more than 31900	0 %	—	31.12.2024
0.6355	ex39074000	80	Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps	0 %	—	31.12.2024
0.3263	ex39076900	10	Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol	0 %	—	31.12.2023
0.5160	ex39076900	40	Poly(ethylene terephthalate) pellets or granules:with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, andcontaining not more than 10 % by weight of other modifiers or additives	0 %	m3	31.12.2021
0.2980	39077000		Poly(lactic acid)	0 %	—	31.12.2023
0.2918	ex39079190	10	Diallyl phthalate prepolymer, in powder form	0 %	—	31.12.2024
0.2977	ex39079980	10	Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder	0 %	—	31.12.2023
0.5639	ex39079980	25	Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol	0 %	—	31.12.2022
0.4940	ex39079980ex39139000	3020	Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)	0 %	—	31.12.2025
0.7491	ex39079980	35	Copolymer in form of a clear, pale yellow liquid, consisting of:phthalic acid isomers and/or aliphatic dicarboxylic acids,aliphatic diols, andfatty acid end-caps,with:a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH,a viscosity at 25 °C of 2000 cPs or more but not more than 8000 cPs, andan acid value less than 10 mg KOH/g	0 %	—	31.12.2023
0.4795	ex39079980	70	Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol	3,5 %	—	31.12.2024
0.5057	ex39079980	80	Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles	0 %	—	31.12.2025
0.2923	ex39089000	10	Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39	0 %	—	31.12.2023
0.3261	ex39089000	30	Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine	0 %	—	31.12.2023
0.6639	ex39089000	55	1,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine (CAS RN 169284-22-4)	0 %	—	31.12.2020
0.7428	ex39092000	10	Polymer mixture, containing by weight:60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1),15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0),5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)	0 %	—	31.12.2022
0.5032	ex39094000	20	Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices	0 %	—	31.12.2025
0.7865	ex39094000	70	Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80 °C or more but not more than 95 °C according to standard ASTM E28-92 (CAS RN 112484-41-0)	0 %	—	31.12.2024
0.4595	ex39095090	10	UV curable water soluble liquid photopolymer consisting of a mixture by weight of:60 % or more of two-functional acrylated polyurethane oligomers, and30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and10 % (± 3 %) of hydroxyl functionalized mono‐functional (metha) acrylates	0 %	—	31.12.2024
0.6423	ex39095090	20	Preparation containing by weight:14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,3 % or more but not more than 5 % of enzymatically modified starch, and77 % or more but not more than 83 % of water	0 %	—	31.12.2024
0.6420	ex39095090	30	Preparation containing by weight:16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,19 % or more but not more than 23 % of diethylene glycol butyl ether, and60 % or more but not more than 64 % of water	0 %	—	31.12.2024
0.6424	ex39095090	40	Preparation containing by weight:34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,37 % or more but not more than 39 % of propylene glycol, and26 % or more but not more than 28 % of water	0 %	—	31.12.2024
0.6921	ex39100000	15	Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated	0 %	—	31.12.2021
0.3260	ex39100000	20	Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]	0 %	—	31.12.2023
0.7057	ex39100000	25	Preparations containing by weight:10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5), and10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)	0 %	—	31.12.2021
0.7058	ex39100000	35	Preparations containing by weight:30 % or more, α-Butyldimethylsilyl-ω-(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6), and10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)	0 %	—	31.12.2021
0.4049	ex39100000	40	Silicones of a kind used in the manufacture of long term surgical implants	0 %	—	31.12.2021
0.7217	ex39100000	45	Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8)	0 %	—	31.12.2021
0.4300	ex39100000	50	Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum	0 %	—	31.12.2022
0.7218	ex39100000	55	Preparation containing by weight:55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083‐19‐2),30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)	0 %	—	31.12.2021
0.4845	ex39100000	60	Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups	0 %	—	31.12.2024
0.7953	ex39100000	65	Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)	0 %	—	31.12.2025
0.5926	ex39100000	70	Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices	0 %	—	31.12.2023
0.8097	ex39100000	75	Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder	0 %	—	31.12.2025
0.6324	ex39100000	80	Monomethacryloxypropylterminated poly(dimethylsiloxane)	0 %	—	31.12.2024
0.4413	ex39111000	81	Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:an iodine value of more than 120, anda Gardner Colour of more than 10 for the pure product, ora Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)	0 %	—	31.12.2023
0.7163	ex39119019	20	Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing:83 % or more by weight of 3a,4,7,7a‐tetrahydro‐4,7‐methanoindene (dicyclopentadiene),a synthetic rubber,whether or not containing by weight 7 % or more of tricyclopentadiene,and each separate component containing:either an aluminium-alkyl compound, oran organic complex of tungsten, oran organic complex of molybdenum	0 %	—	31.12.2023
0.4280	ex39119019	30	Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide	0 %	—	31.12.2022
0.5145	ex39119019	40	m-Xylene formaldehyde resin	0 %	—	31.12.2021
0.6422	ex39119019	50	Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form	0 %	—	31.12.2024
0.6519	ex39119019	70	Preparation, containing:Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight	0 %	—	31.12.2024
0.3257	ex39119099	25	Copolymer of vinyltoluene and α-methylstyrene	0 %	—	31.12.2023
0.5053	ex39119099	30	1,4:5,8-Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated	0 %	—	31.12.2020
0.5109	ex39119099	35	Alternated copolymer of ethylene and maleic anhydride (EMA)	0 %	—	31.12.2025
0.8009	ex39119099	38	Mixture containing by weight:90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)	0 %	—	31.12.2025
0.3221	ex39119099	40	Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight	0 %	—	31.12.2023
0.3256	ex39119099	45	Copolymer of maleic acid and methyl vinyl ether	0 %	—	31.12.2023
0.8010	ex39119099	48	Mixture containing by weight:90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)	0 %	—	31.12.2025
0.5729	ex39119099	53	Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)	0 %	—	31.12.2022
0.5730	ex39119099	57	Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)	0 %	—	31.12.2022
0.3255	ex39119099	65	Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether	0 %	—	31.12.2023
0.4091	ex39119099	86	Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)	0 %	—	31.12.2021
0.4912	ex39121100	30	Cellulose triacetate (CAS RN 9012-09-3)	0 %	—	31.12.2021
0.4953	ex39121100	40	Cellulose diacetate powder	0 %	—	31.12.2025
0.3251	ex39123985	10	Ethylcellulose, not plasticized	0 %	—	31.12.2023
0.3253	ex39123985	20	Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose	0 %	—	31.12.2023
0.3252	ex39123985	30	Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms	0 %	—	31.12.2023
0.5172	ex39123985	40	Hypromellose (INN) (CAS RN 9004-65-3)	0 %	—	31.12.2021
0.6718	ex39123985	50	Polyquaternium 10 (CAS RN 68610-92-4)	0 %	—	31.12.2025
0.4017	ex39129010	20	Hydroxypropyl methylcellulose phthalate	0 %	—	31.12.2023
0.3898	ex39139000	30	Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350000	0 %	—	31.12.2023
0.3749	ex39139000	85	Sterile sodium hyaluronate (CAS RN 9067-32-7)	0 %	—	31.12.2023
0.3249	ex39139000	95	Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)	0 %	—	31.12.2023
0.4797	ex39162000	91	Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:titanium dioxide,poly(methyl methacrylate),calcium carbonate,binding agents	0 %	—	31.12.2024
0.5988	ex39169010	10	Rods with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride),7 % or more but not more than 9 % of polytetrafluorethylene, if present,10 % or more but not more than 25 % of inorganic fillers	0 %	—	31.12.2023
0.8116	ex39173100ex39173200ex39173900	302020	Tubings:with an outer diameter of 0,33 mm or more but not more than 3,3 mm,with an inner diameter of 0,01 mm or more but not more than 2,1 mm,suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,suitable for all solutions used in chromatography,whether or not with fused silica,whether or not covered with PEEK,for use in chromatographic system	0 %	—	31.12.2021
0.8117	ex39174000	20	Plastic fittings (kit of nuts and ferrules or nuts) and connectors:threaded,supported with or without a stainless steel ring,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,for tubings with:outer diameter of 0,33 mm or more but not more than 3,3 mm,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,suitable for all solutions used in chromatography,for use in the production of chromatographic systems	0 %	—	31.12.2021
0.4641	ex39174000	91	Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses	0 %	—	31.12.2024
0.2421	ex39191019ex39191080ex39199080	102531	Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	0 %	—	31.12.2023
0.4800	ex39191080ex39199080	2720	Polyester film:coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, andon the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner	0 %	—	31.12.2024
0.2910	ex39191080	35	Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	0 %	—	31.12.2023
0.4757	ex39191080	37	Polytetrafluoroethylene film:with a thickness of 100 μm or more,an elongation at break of not more than 100 %,coated on one side with a pressure sensitive silicon adhesive	0 %	—	31.12.2025
0.4093	ex39191080ex39199080	4043	Black poly(vinyl chloride) film:with a gloss of more than 30 degrees according to ASTM D2457,whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner	0 %	—	31.12.2022
0.4761	ex39191080ex39199080	4326	Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner	0 %	—	31.12.2022
0.4303	ex39191080ex39199080	4545	Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm	0 %	—	31.12.2022
0.8109	ex39191080	48	Plastic strips of polypropylene,self-adhesive,unilaterally adhesive-coated with an Acrylic Polymer,in rolls with a width of 20 cm or less,with a thickness including adhesion layer of 0,03 mm or less,for use in the manufacturing of lithium-ion electric rechargeable batteries	3.2 %	—	31.12.2021
0.3035	ex39191080ex39199080ex39201089	504125	Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs	0 %	—	31.12.2023
0.3036	ex39191080ex39199080	5553	Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method)	0 %	—	31.12.2022
0.2416	ex39191080ex39199080ex39206100	573030	Reflecting sheet:of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern,covered on one or both sides with one or more layers of plastic or metallisation, andwhether or not covered on one side with a self-adhesive layer and a release sheet	0 %	—	31.12.2023
0.6886	ex39191080	63	Reflecting film consisting ofa layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,a layer of an acrylic resin having embedded glass beads,a layer of an acrylic resin hardened by a melamine cross-linking agent,a metal layer,an acrylic adhesive, anda release film	0 %	—	31.12.2025
0.5161	ex39191080ex39199080	7075	Rolls of polyethylene foil:self-adhesive on one side,of a total thickness of 0,025 mm or more, but not more than 0,09 mm,of a total width of 60 mm or more, but not more than 1110 mm,for use in the manufacture of products of Headings 8521 or 8528 for protection purposes	0 %	—	31.12.2021
0.4545	ex39191080ex39199080	7350	Self-adhesive reflecting sheet whether or not in segmented pieces:whether or not containing a watermark,with or without an application tape coated on one side with an adhesive,the reflective sheet consists of:a layer of acrylic or vinyl polymer,a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,a layer of metallisation,an adhesive layer, anda release sheet,whether or not containing an additional layer of polyester	0 %	—	31.12.2023
0.5166	ex39191080ex39199080	7580	Self-adhesive reflecting film, consisting of several layers including:a copolymer of acrylic resin,polyurethane,a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,glass microspheres, andan adhesive layer, with a release liner on one or both sides	0 %	—	31.12.2021
0.4799	ex39191080ex39199080	8528	Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film:coated on one side with an acrylic UV-sensitive adhesive and a liner,of a total thickness of 65 μm or more without release liner	0 %	—	31.12.2024
0.4414	ex39199080	19	Transparent poly(ethylene terephthalate) self-adhesive film:free from impurities or faults,coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,with a total thickness without the liner of 54 μm or more but not more than 64 μm, anda width of more than 1295 mm but not more than 1305 mm	0 %	—	31.12.2023
0.7415	ex39199080	21	Polytetrafluoroethylene film:with a thickness of 50 μm or more but not more than 155 μm,with a width of 6,30 mm or more but not more than 585 mm,an elongation at break of not more than 200 %, andcoated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 40 μm	0 %	—	31.12.2022
0.4314	ex39199080	22	Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm	0 %	—	31.12.2024
0.3243	ex39199080	23	Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner	0 %	—	31.12.2023
0.4760	ex39199080	24	Reflecting laminated sheet:consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,covered on both sides with one or more layers of plastic material, andcovered on one side with an adhesive layer and a release sheet	0 %	—	31.12.2024
0.4415	ex39199080	33	Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm	0 %	—	31.12.2023
0.4398	ex39199080	35	Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:a layer of polyurethane containing glass micro beads,a layer of poly(ethylene vinyl acetate),an adhesive layer, anda release sheet	0 %	—	31.12.2023
0.7503	ex39199080	37	Polyethylene or polycarbonate film, cut into ready to use forms:one side partly printed whereby part of the printing either gives information about the meaning of LED's visible at the unprinted areas, or marks those points which must be touched to operate the system,the other side partly covered with an adhesive layer,both sides covered with a release liner, andwith dimensions of not more than 14 cm x 2,5 cm,for use in the manufacture of push-button switches for mechatronic system adjustable furniture	0 %	—	31.12.2023
0.4445	ex39199080	49	Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet	0 %	—	31.12.2023
0.5507	ex39199080	51	Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet	0 %	—	31.12.2023
0.6883	ex39199080	52	White polyolefin tape consisting of:an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm,a polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, anda non-silicone release layer with a thickness below 1 μm	0 %	—	31.12.2020
0.4532	ex39199080	54	Poly(vinyl chloride) film, on one side covered with:a polymer layer,an adhesive layer,a release liner, on one side embossed, containing oblate spheres,whether or not on the other side covered with an adhesive layer and a metallised polymer layer	0 %	—	31.12.2024
0.5052	ex39199080	63	Co-extruded trilayer film:each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,coated with an acrylic pressure sensitive adhesive andwith a release liner,of an overall thickness of not more than 110 μm	0 %	—	31.12.2020
0.4947	ex39199080	65	Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner	0 %	—	31.12.2025
0.4925	ex39199080	70	Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad	0 %	—	31.12.2025
0.4964	ex39199080	82	Reflecting film consisting of:a polyurethane layer,a glass microspheres layer,a metallised aluminium layer, andan adhesive, covered on one or both sides with a release liner,whether or not a poly(vinyl chloride) layer,a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use	0 %	—	31.12.2025
0.4459	ex39199080	83	Reflector or diffuser sheets, in rolls,for protection against ultraviolet or infra-red heat radiation, to be affixed to windows orfor equal transmission and distribution of light, intended for LCD modules	0 %	—	31.12.2022
0.3241	ex39201025	30	Mono-layered high-density polyethylene film:containing by weight 99 % or more of polyethylene,with a thickness of 12 μm or more but not more than 20 μm,with a length of 4000 m or more but not more than 7000 m,with a width of 600 mm or more but not more than 900 mm	0 %	—	31.12.2023
0.4419	ex39201028	91	Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:is repetitive and equally spaced along the length of the film,is equally and visibly aligned when viewed from the back or front of the film	0 %	—	31.12.2023
0.6640	ex39201040	40	Tubular layered film predominately of polyethylene:consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,having a total thickness of 55 μm or more,having a diameter of 500 mm or more but not more than 600 mm	0 %	—	31.12.2025
0.3754	ex39201089	40	Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm	0 %	—	31.12.2021
0.8149	ex39201089	45	Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels	0 %	—	31.12.2022
0.5139	ex39201089	55	Ethylene vinyl acetate (EVA) film:with a raised relief surface with embossed undulations,not laminated,not cross-linked, andwith a thickness of more than 0,3 mm	0 %	—	31.12.2021
0.5482	ex39202021	40	Sheets of biaxially - oriented polypropylene film:with the thickness of not more than 0,1 mm,printed on both sides with specialised coatings to allow banknote security printing	0 %	—	31.12.2021
0.4394	ex39202029	60	Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa, anda tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa,as determined by test method ASTM D882/ISO 527-3	0 %	—	31.12.2023
0.3028	ex39202029	70	Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:a thickness of 55 μm or more but not more than 97 μm,a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, anda tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa	0 %	—	31.12.2024
0.5167	ex39202029	94	Mono-axial oriented, co-extruded film:consisting of 3 to 5 layers,each layer mainly consisting of polypropylene and/or polyethylene,each layer containing not more than 10 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 75 μm	0 %	—	31.12.2022
0.3024	ex39204310	92	Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)	0 %	—	31.12.2023
0.3235	ex39204310ex39204910	9493	Film of a specular gloss of 70 or more, measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 9403	0 %	—	31.12.2023
0.3026	ex39204310	95	Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet	0 %	—	31.12.2023
0.5930	ex39204910	30	Film of a (polyvinyl)chloride-copolymercontaining by weight 45 % or more of fillerson a support	0 %	—	31.12.2023
0.3021	ex39205100	20	Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm	0 %	—	31.12.2023
0.5506	ex39205100	30	Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm	0 %	—	31.12.2023
0.5753	ex39205100	40	Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)	0 %	—	31.12.2023
0.7949	ex39206100	40	Extruded thermoplastic foils or films of polycarbonate with:matt surface texture on both sides,a thickness of more than 50 μm but not more than 200 μm,a width of 800 mm or more, but not more than 1500 mm, anda length of 915 m or more, but not more 2500 m,for use in the production of retroreflective products	0 %	—	31.12.2025
0.7418	ex39206219ex39206290	0510	Poly(ethylene terephthalate) film in rolls:with a thickness of 0,335 mm or more but not more than 0,365 mm, andcoated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm	0 %	—	31.12.2022
0.8011	ex39206219ex39206290	6820	Poly(ethylene terephthalate) film in rolls:with a thickness of 50 μm or more but not more than 350 μm, andcovered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm	0 %	—	31.12.2025
0.3234	ex39206219	08	Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:only dyed in the mass, ordyed in the mass and metallised on one side	0 %	—	31.12.2023
0.3017	ex39206219	12	Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0 %	—	31.12.2023
0.3022	ex39206219	18	Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0 %	—	31.12.2023
0.3034	ex39206219	20	Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers	0 %	—	31.12.2023
0.3356	ex39206219	38	Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm	0 %	—	31.12.2023
0.3357	ex39206219	48	Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)	0 %	—	31.12.2025
0.2589	ex39206219	52	Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D257 method)	0 %	—	31.12.2023
0.4344	ex39206219	60	Poly(ethylene terephthalate) film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm	0 %	—	31.12.2022
0.4520	ex39206219	76	Transparent poly(ethylene terephthalate) film:coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,with a light transmission of more than 93 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm	0 %	—	31.12.2023
0.3328	ex39206900	20	Film of poly(ethylene naphthalene-2,6-dicarboxylate)	0 %	—	31.12.2023
0.7882	ex39206900	30	Mono- or multilayer, transverse oriented, shrink film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 20 μm or more but not more than 100 μm,with a length of 2385 m or more but not more than 9075 m,biodegradable and compostable (as determined by the method EN 13432)	0 %	—	31.12.2024
0.6483	ex39206900	50	Monolayer, biaxially oriented film:composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,having a thickness of 20 μm or more but not more than 120 μm,biodegradable and compostable (as determined by the method EN 13432)	0 %	—	31.12.2024
0.6484	ex39206900	60	Monolayer, transverse oriented, shrink film:composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),having a thickness of 45 μm or more but not more than 50 μm,biodegradable and compostable (as determined by the method EN 13432)	0 %	—	31.12.2024
0.7883	ex39206900	70	Mono- or multilayer, biaxially oriented film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 9 μm or more but not more than 120 μm,with a length of 1395 m or more but not more than 21560 m,biodegradable and compostable (as determined by the method EN 13432)	0 %	—	31.12.2024
0.6515	ex39207910	10	Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm	0 %	p/st	31.12.2024
0.4766	ex39209100	52	Poly(vinyl butyral) film:containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,with a thickness of 0,73 mm or more but not more than 1,50 mm	0 %	—	31.12.2024
0.3329	ex39209100	91	Poly(vinyl butyral) film having a graduated coloured band	3 %	—	31.12.2023
0.3136	ex39209100	93	Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm	0 %	—	31.12.2024
0.4508	ex39209100	95	Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser	0 %	—	31.12.2023
0.3917	ex39209928	40	Polymer film containing the following monomers:poly (tetramethylene ether glycol),bis (4-isocyanotocyclohexyl) methane,1,4-butanediol or 1,3-butanediol,with a thickness of 0,25 mm or more but not more than 5,0 mm,embossed with a regular pattern on one surface,and covered with a release sheet	0 %	—	31.12.2023
0.5938	ex39209928	45	Transparent polyurethane film metallised on one side:with a gloss of more than 90 degrees according to ASTM D2457,covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer,covered on the other side with a protective poly(ethylene terephthalate) film,with a total thickness of more than 204 μm but not more than 244 μm	0 %	—	31.12.2024
0.8005	ex39209928	48	Thermoplastic polyurethane foil in rolls, with:a width of 900 mm or more but not more than 1016 mm,a matt finish,a thickness of 0,4 mm (± 8 %),an elongation at break of 480 % or more (ASTM D412 (Die C)),a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),a Shore A hardness of 90 (± 3) (ASTM D2240),a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),a melting point of 165°C (± 10 °C)	0 %	—	31.12.2025
0.4192	ex39209928	50	Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film	0 %	—	31.12.2021
0.6579	ex39209928	65	Matt, thermoplastic polyurethane foil in rolls with:a width of 1640 mm (± 10 mm),a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),a thickness of more than 365 μm but not more than 760 μm,a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),an elongation to break of 470 % (as determined by the method: EN ISO 527)	0 %	m2	31.12.2024
0.5315	ex39209928	70	Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:microspheres with a coating of metal, whether or not alloyed with gold,an adhesive layer,with a protective layer of silicone or poly(ethylene terephthalate) on one side,with a protective layer of poly(ethylene terephthalate) on the other side, andwith a width of 5 cm or more but not more than 100 cmwith a length of not more than 2000 m	0 %	—	31.12.2021
0.3326	ex39209959	25	Poly(1-chlorotrifluoroethylene) film	0 %	—	31.12.2023
0.7603	ex39209959	30	Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite	0 %	—	31.12.2023
0.2873	ex39209959	55	Ion-exchange membranes of fluorinated plastic material	0 %	—	31.12.2023
0.3135	ex39209959	65	Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %	0 %	—	31.12.2023
0.7127	ex39209959	70	Tetrafluoroethylene film, put up in rolls, with:a thickness of 50 μm,a melting point of 260 °C, anda specific gravity of 1,75 (ASTM D792),for use in the manufacture of semiconductor devices	0 %	—	31.12.2021
0.7529	ex39209959	75	Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with:a thickness of 0,010 mm or more but not more than 0,80 mm,a width of 1219 mm or more but not more than 1575 mm, anda melting point of 252 °C (measured according ASTM D-3418)	0 %	—	31.12.2023
0.4095	ex39209990	20	Anisotropic conductive film, in rolls, of a width of 1,2 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays	0 %	—	31.12.2023
0.3318	ex39211310	10	Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092	0 %	m3	31.12.2024
0.5815	ex39211310	20	Rolls of open-cell polyurethane foam:with a thickness of 2,29 mm (±0,25 mm),surface-treated with a foraminous adhesion promoter, andlaminated to a polyester film and a layer of textile material	0 %	—	31.12.2022
0.6066	ex39211900	30	Blocks with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene, if present10 % or more but not more than 25 % of inorganic fillers	0 %	—	31.12.2023
0.6911	ex39211900	40	Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:a width of 98 mm or more but not more than170 mm,a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators	3.2 %	—	31.12.2021
0.7132	ex39211900	50	Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:a total thickness of more than 0,05 mm but not more than 0,20 mm,a water entry pressure between 5 and 200 kPa according to ISO 811, andan air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5	0 %	—	31.12.2021
0.7280	ex39211900	60	Multi-porous multilayer separator foil with:one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,a width of 65 mm or more but not more than 170 mm,a total thickness of 0,01 mm or more but not more than 0,03 mm,a porosity of 0,25 or more but not more than 0,65	0 %	m2	31.12.2022
0.7309	ex39211900	70	Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having:a width of 1600 mm or more but not more than 1730 mm, anda membrane thickness of 15 μm or more, but not more than 50 μm,for use in the manufacture of a bi-component ePTFE membrane	0 %	—	31.12.2022
0.7263	ex39211900	45	Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:zero transversal production direction (TD) shrinkage,a total thickness of 8 μm or more, but not more than 50 μm,a width of 15 mm or more, but not more than 900 mm,a length of more than 200 m, but not more than 8000 m,an average pore size between 0,02 μm and 0,1 μm,laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,coated or not with surfactant,coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm	3.2 %	—	31.12.2021
0.3314	ex39211900	93	Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment	0 %	—	31.12.2023
0.3002	ex39211900	95	Film of polyethersulfone, of a thickness of not more than 200 μm	0 %	—	31.12.2023
0.3003	ex39219010	10	Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres	0 %	—	31.12.2023
0.4379	ex39219010	20	Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin	0 %	—	31.12.2023
0.6156	ex39219010	30	Multilayer film consisting of:a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm	0 %	m2	31.12.2023
0.4844	ex39219055ex70194000ex70194000	252129	Prepreg sheets or rolls containing polyimide resin	0 %	—	31.12.2024
0.7510	ex39219055	35	Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards	0 %	m2	31.12.2023
0.6742	ex39219055	40	Three layered fabric sheet, in rolls,comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,coated on both sides with polyamide,of a total thickness not more than 135 μm,of a total weight not more than 80 g/m2	0 %	m2	31.12.2025
0.6807	ex39219055	50	Glass fibre-reinforced sheets of reactive, halogen-free epoxide resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems	0 %	m2	31.12.2020
0.3312	ex39219060	35	Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells	0 %	—	31.12.2023
0.5396	ex39231090	10	Photomask or wafer compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage, andwith or without a gasket seal,of a kind used in the photolithography or other semiconductor production to house photomasks or wafers	0 %	—	31.12.2021
0.7040	ex39263000	20	Plastic logo of the automobile manufacturer with mounting brackets on the back side, whether or not chromed, for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
0.7630	ex39263000	40	Plastic internal door handle used in the manufacture of motor vehicles	0 %	—	31.12.2023
0.7335	ex39263000ex39269097	5048	Coated interior or exterior decorative parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, anda PVC foil,not containing layers of copper, nickel or chromium,for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705	0 %	p/st	31.12.2022
0.2764	ex39269097	10	Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm	0 %	—	31.12.2023
0.3756	ex39269097	15	Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems	0 %	—	31.12.2023
0.2978	ex39269097	20	Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material	0 %	—	31.12.2023
0.6717	ex39269097	23	Plastic cover with clips for the exterior rear-view mirror of motor vehicles	0 %	p/st	31.12.2025
0.7445	ex39269097	27	Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror	0 %	—	31.12.2023
0.5474	ex39269097	30	Parts of car radio and car air-conditioner front panels:of acrylonitrile-butadiene-styrene with or without polycarbonate,coated with a copper, a nickel and a chrome layers,with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm	0 %	—	31.12.2021
0.6301	ex39269097	33	Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls	0 %	p/st	31.12.2024
0.7061	ex39269097	40	Silicone shell for breast implant	0 %	—	31.12.2021
0.3850	ex39269097	43	Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm	0 %	—	31.12.2023
0.6166	ex39269097	50	Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces	0 %	p/st	31.12.2023
0.8118	ex39269097	58	Plastic ferrules and/or plugs:supported with or without a stainless steel ring,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,for tubings with:outer diameter of 0,33 mm or more but not more than 3,3 mm,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,suitable for all solutions used in chromatography,for use in the production of chromatographic systems	0 %	—	31.12.2021
0.7196	ex39269097	77	Silicone decoupling ring with an inner diameter of 14,7 mm or more but not more than 16,0 mm, in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems	0 %	p/st	31.12.2021
0.3046	ex40070000	10	Siliconated vulcanised rubber thread and cord	0 %	—	31.12.2023
0.6708	ex40094200	20	Rubber brake hose with:textile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2025
0.7042	ex40103100ex40103300ex40103900	101010	Vulcanized rubber endless transmission belt of trapezoidal cross‐section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
0.6844	ex40169300	30	Rectangular ethylene-propylene-diene rubber gasket, with:a length of 72 mm or more but not more than 825 mm,a width of 18 mm or more but not more than 155 mm,a peak temperature of 150°C or more but not more than 240 °C,a permissible material outflow at the place of the mold split of not more than 0,3 mm	0 %	—	31.12.2025
0.7170	ex40169957	10	Air intake hose for air supply to the combustion part of the engine comprising at least:one flexible rubber hose,one plastic hose, andmetal clips,whether or not a resonator,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.7169	ex40169957	20	Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.7357	ex40169957	30	Pin boot of a brake calliper made of vulcanized rubber with:an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,a height of 15 mm or more, but not more than 40 mm, anda ribbed design,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2022
0.5148	ex40169997	30	Tyre moulding bladder	0 %	—	31.12.2021
0.5842	ex41044119	10	Buffalo leather, split, chrome tanned synthetic retanned ('crust'), dry	0 %	—	31.12.2022
0.2555	4105100041053090		Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114	0 %	—	31.12.2023
0.2553	4106210041062290		Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114	0 %	—	31.12.2023
0.2554	41063100410632004106409041069200		Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114	0 %	—	31.12.2023
0.6223	ex44083930	10	Okoume veneer sheets:of a length of 1270 mm or more, but not more than 3200 mm,of a width of 150 mm or more, but not more than 2000 mm,of a thickness of 0,5 mm or more, but not more than 4 mm,not sanded, andnot planed	0 %	—	31.12.2023
0.7065	ex44129940ex44129950ex44129985	101020	Laminated wood consisting of two layers of sheets for veneering:a width of 210 mm or more but not more than 320 mm,a length of 297 mm or more but not more than 450 mm,a thickness of 0,45 mm or more but not more than 0,8 mm,for use in the manufacture of products falling within heading 4420, 4421, 4820, 4909 or 4911	0 %	—	31.12.2021
0.4217	ex50040010	10	Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk	0 %	—	31.12.2021
0.2551	ex50050010ex50050090	1010	Yarn spun entirely from silk waste (noil), not put up for retail sale	0 %	—	31.12.2023
0.2544	52081110		Fabrics for the manufacture of bandages, dressings and medical gauzes	5,2 %	—	31.12.2023
0.7372	ex53110090	10	Plain-woven fabric of paper yarns glued on a tissue paper layer:with a weight of 190 g/m2 or more but not more than 280 g/m2, andcut into rectangles with a side length of 40 cm or more but not more than 140 cm	0 %	—	31.12.2022
0.7515	ex53110090	20	Sisal cloth in rolls with:a length of 20 metres or more but not more than 30 metres, anda maximum width of 2,5 metres,for use in the production of Stainless Steel Kitchenware	0 %	—	31.12.2023
0.7608	ex54024400	10	Synthetic elastomeric filament yarn:untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1000 dtex,composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran,for use in the manufacture of disposable hygiene products of heading 9619	0 %	—	31.12.2023
0.4902	ex54024700	20	Bicomponent monofilament yarn of not more than 30 dtex, consisting of:a poly(ethylene terephthalate) core, andan outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),for use in the manufacture of filtration fabrics	0 %	—	31.12.2020
0.2975	ex54024900	30	Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures	0 %	—	31.12.2023
0.3098	ex54024900	50	Non-textured filament yarn of poly(vinyl alcohol)	0 %	—	31.12.2023
0.3096	ex54024900	70	Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn	0 %	m	31.12.2023
0.8108	ex54033100	10	Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments	0 %	—	31.12.2025
0.6884	ex54033900	10	Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry	0 %	—	31.12.2022
0.2481	ex54041900	50	Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers	0 %	—	31.12.2023
0.3311	ex54049090	20	Strip of polyimide	0 %	—	31.12.2023
0.4258	ex54071000	10	Textile fabric, consisting of warp filament yarns of polyamide‐6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p‐phenylenediamine and 3,4'–oxybis (phenyleneamine)	0 %	—	31.12.2022
0.3090	ex55031100ex56013000	1040	Synthetic staple fibres of a copolymer of terephthalic acid, p‐phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7 mm	0 %	—	31.12.2023
0.3214	ex55039000ex55069000ex56013000	201010	Poly(vinyl alcohol) fibres, whether or not acetalized	0 %	—	31.12.2023
0.3212	ex56031110ex56031190ex56031210ex56031290ex56039110ex56039190ex56039210ex56039290	1010101010101010	Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:of a thickness of 200 μm or more but not more than 280 μm, andof a weight of 20 g/m2 or more but not more than 50 g/m2	0 %	m2	31.12.2023
0.2552	ex56031290ex56031390ex56031490ex56039290ex56039390ex56039490	303010604030	Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles	0 %	m2	31.12.2023
0.2548	ex56031290ex56031390	6060	Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)	0 %	m2	31.12.2023
0.5059	ex56031310	20	Non-woven of spunbonded polyethylene, with a coating,of a weight of more than 80 g/m2 but not more than 105 g/m2 andan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)	0 %	m2	31.12.2025
0.8024	ex56031410	20	Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2laminated on one side with a membrane or a membrane and aluminiumwith filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class Mpleatable	0 %	m2	31.12.2023
0.5987	ex56031490	60	Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2,not laminated,with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M,pleatable	0 %	m2	31.12.2023
0.3041	ex56039290ex56039390	2020	Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene	0 %	m2	31.12.2023
0.3042	ex56039290ex56039490	7040	Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene	0 %	m2	31.12.2023
0.5197	ex56039290ex56039390	8050	Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch properties,for use in the manufacture of infant/child care products	0 %	m2	31.12.2021
0.6135	ex56039390	60	Nonwovens made of polyester fibres:with a weight of 85 g/m2,with a constant thickness of 95 μm (± 5 μm),neither coated nor covered,in 1 m wide rolls of 2000 m to 5000 m length,suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters	0 %	m2	31.12.2023
0.3210	ex56039490	20	Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips	0 %	m2	31.12.2023
0.3406	ex56075090	10	Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures	0 %	—	31.12.2024
0.2415	ex58030010	91	Gauze of cotton, of a width of less than 1500 mm	0 %	—	31.12.2023
0.7081	ex59032090	20	Two layers' plastic-laminated textile fabric with:one layer consisting of knitted or crocheted polyester textile fabric,other layer consisting of polyurethane foam,a weight of 150 g/m2 or more, but not more than 500 g/m2,a thickness of 1 mm or more, but not more than 5 mm,for use in the manufacture of the retractable roof of motor vehicles	0 %	—	31.12.2021
0.2417	ex59069990	10	Rubberised textile fabric, consisting of warp yarns of polyamide‐6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine)	0 %	—	31.12.2023
0.2453	ex59070000	10	Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm	0 %	—	31.12.2021
0.3207	ex59119099ex84219990	3092	Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more	0 %	—	31.12.2023
0.4638	ex59119099	40	Multi-layered non-woven polyester polishing pads, impregnated with polyurethane	0 %	—	31.12.2024
0.7340	ex59119099	50	Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers	0 %	—	31.12.2022
0.6469	ex68042100	20	Discs:of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,having a self-sharpening effect by constant release of the diamonds,suitable for abrasive cutting of wafers,whether or not containing a hole in the centre,whether or not on a support,with a weight of not more than 377 g per piece, andwith an external diameter of not more than 206 mm	0 %	p/st	31.12.2024
0.7126	ex68053000	10	Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors	0 %	—	31.12.2021
0.2755	ex68138900	20	Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components	0 %	—	31.12.2023
0.5931	ex68141000	10	Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres	0 %	—	31.12.2023
0.2546	ex69039090	40	Silicon carbide reactor tubes and holders having a maximum service temperature of 1370 °C or more	0 %	—	31.12.2023
0.4978	ex69091900	20	Silicon nitride (Si3N4) rollers or balls	0 %	—	31.12.2025
0.6071	ex69091900	25	Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide	0 %	—	31.12.2023
0.3403	ex69091900	30	Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end	0 %	—	31.12.2023
0.8028	ex69091900	40	Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics:extruded fired ceramic bound multicellular cylindrical structure,5 % or more by weight but not more than 70 % by weight of activated carbon,30 % or more by weight but no more than 90 % by weight of ceramic binder,with a diameter of 29 mm or more but no more than 41 mm,a length of not more than 150 mm,fired at temperature of 800 °C or more	0 %	p/st	31.12.2025
0.2538	ex69091900ex69149000	5020	Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:2 % or more of diboron trioxide,28 % or less of silicon dioxide, and60 % or more of dialuminium trioxide	0 %	—	31.12.2023
0.3766	ex69091900	60	Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end	0 %	—	31.12.2023
0.4582	ex69091900	70	Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section	0 %	—	31.12.2023
0.3404	ex69149000	30	Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm	0 %	—	31.12.2024
0.6651	ex70049080	10	Alkali-aluminosilicate drawn flat glass sheet with:a scratch proof coating of a thickness of 45 μm (+/‐ 5 μm),a total thickness of 0,45 mm or more but not more than 1,1 mm,a width of 300 mm or more but not more than 3210 mm,a length of 300 mm or more but not more than 2000 mm,a visible light transmission of 90 % or more,an optical distortion of 55° or more	0 %	—	31.12.2020
0.6286	ex70060090	25	Glass wafer made of borosilicate float glass:with a total thickness variation of 1 μm or less, andlaser-engraved	0 %	p/st	31.12.2024
0.7619	ex70060090	40	Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:a length of 300 mm or more but not more than 1500 mm,a width of 300 mm or more but not more than 1500 mm,a thickness of 0,5 mm or more but not more than 1,1 mm,an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,with or without a multi layer anti-reflection-coating on the other side, andmachined (chamfered) edges	0 %	—	31.12.2023
0.6380	ex70091000	30	Layered glass with mechanical dimming ability by different angles of incident light comprising:whether or not a layer of chrome,a break-resistance adhesive tape or hot-melt adhesive, anda release film on the front side and protective paper at the back side,of a kind used for interior rear-view mirrors of vehicles	0 %	p/st	31.12.2024
0.6870	ex70091000	40	Electrochromic self-dimming inside rear-view mirror, consisting of:a mirror supporta plastic casing andan integrated circuitfor use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2025
0.5789	ex70091000	50	Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors:whether or not equipped with plastic backing plate,whether or not equipped with a heating element,whether or not equipped with Blind Spot Module (BSM) display	0 %	—	31.12.2022
0.5022	ex70099100	10	Unframed glass mirrors with:a length of 1516 mm (± 1 mm),a width of 553 mm (± 1 mm),a thickness of 3 mm (±0,1 mm),the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm,a lead content of not more than 90 mg/kg, anda corrosion resistance of 72 hours or more according to ISO 9227 salt spray test	0 %	p/st	31.12.2020
0.3400	ex70140000	10	Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware	0 %	—	31.12.2023
0.3161	ex70191200ex70191200	0222	Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials	0 %	—	31.12.2023
0.5750	ex70191200ex70191200	0525	Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (±0,5 μm)	0 %	—	31.12.2022
0.2532	ex70191910	10	Yarn of 33 tex or a multiple thereof (±7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers	0 %	—	31.12.2023
0.5749	ex70191910	15	S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (- 1 μm / +1,5 μm)	0 %	—	31.12.2022
0.5021	ex70191910	20	Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate	0 %	—	31.12.2025
0.5020	ex70191910	25	Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate	0 %	—	31.12.2025
0.2535	ex70191910	30	Yarn of E-glass of 22 tex (±1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate	0 %	—	31.12.2024
0.4848	ex70191910	50	Yarn of 11 tex or a multiple thereof (±7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated	0 %	—	31.12.2022
0.2872	ex70191910	55	Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:9 % or more but not more than 16 % of magnesium oxide,19 % or more but not more than 25 % of aluminium oxide,0 % or more but not more than 2 % of boron oxide,without calcium oxide,coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene	0 %	—	31.12.2024
0.4024	ex70191910ex70199000	6030	High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)	0 %	—	31.12.2023
0.3153	ex70191910ex70199000	7020	Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)	0 %	—	31.12.2023
0.4059	ex70193900	50	Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts	0 %	—	31.12.2021
0.4476	ex70194000ex70194000	1119	Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°C and 120 °C (measured according to IPC-TM-650) of:10 ppm per°C or more but not more than 12ppm per °C in the length and width, and20 ppm per°C or more but not more than 30 ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)	0 %	—	31.12.2023
0.7056	ex70194000ex70195200	7030	E-fibre glass fabrics:having a weight of 20 g/m2 or more, but not more than 214 g/m2,impregnated with silane,in rolls,having a humidity content by weight of 0,13 % or less, andhaving not more than 3 hollow fibres out of 100000 fibres,for the exclusive use in the manufacture of prepregs and copper clad laminates	0 %	m2	31.12.2021
0.7647	ex70195200	40	Epoxy resin coated glass woven fabric containing by weight:91 % or more but not more than 93 % of glass fibres,7 % or more but not more than 9 % of epoxy resin	0 %	—	31.12.2023
0.3940	ex70199000	10	Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate	0 %	—	31.12.2023
0.5348	ex70200010ex76169990	1077	Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body	0 %	p/st	31.12.2021
0.7266	ex70200010	20	Raw material for optical elements of fused silicon dioxide with:a thickness of 10 cm or more but not more than 40 cm anda weight of 100 kg or more	0 %	p/st	31.12.2022
0.4127	ex72011011	10	Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm	0 %	—	31.12.2021
0.4128	ex72011030	10	Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon	0 %	—	31.12.2021
0.3353	72025000		Ferro-silico-chromium	0 %	—	31.12.2023
0.4853	ex72029980	10	Ferro-dysprosium, containing by weight:78 % or more of dysprosium, and18 % or more but not more than 22 % of iron	0 %	—	31.12.2025
0.7235	ex73151190	10	Roller type steel timing chain with a fatigue limit of 2 kN at 7000 rpm or more for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2022
0.7166	ex73181900	30	Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.7502	ex73182400	40	Tube or pipe restraint joint elements:of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,produced by metal injection moulding,with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/ – 1),measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm	0 %	—	31.12.2023
0.4548	ex73209010	91	Flat spiral spring of tempered steel, with:a thickness of 2,67 mm or more, but not more than 4,11 mm,a width of 12,57 mm or more, but not more than 16,01 mm,a torque of 18,05 Nm or more, but not more than 73,5 Nm,an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°,for use in the manufacture of tensioners for power transmission belts, for internal combustion engines	0 %	p/st	31.12.2023
0.4126	ex73262000	20	Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling	0 %	—	31.12.2021
0.7414	ex73269092	40	Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with:a diameter of 5752 mm or more but not more than 5758 mm,a height of 3452 mm or more but not more than 3454 mm,a total weight 167875 kg or more but not more than 168125 kg,of a kind used for the fabrication of a nuclear reactor vessel	0 %	p/st	31.12.2022
0.7891	ex73269094	40	Steel ball neck, drop forged, machined, also heat treated or surface treated, with an angle between the centre of the conical head and the arm of less than 90° or with an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars	0 %	—	31.12.2024
0.6680	ex73269098ex79070000	4010	Iron, steel and/or zinc alloy weights:with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,whether or not with parts of other material,whether or not with parts of other metals,whether or not surface treated,whether or not printed,of a kind used for the production of remote controls	0 %	—	31.12.2025
0.7365	ex87088099	30	Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:with a chrome coating,of a diameter of 11 mm or more, but not more than 28 mm,of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding	0 %	—	31.12.2022
0.7401	ex74091900ex74102100	1070	Plates or sheets:with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,and containing at least one of the following:poly(tetrafluoroethylene) (CAS RN 9002-84-0),poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4),epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height,for use in the manufacture of circuit boards	0 %	—	31.12.2022
0.5311	ex74101100ex85079080ex85459090	106030	Roll of laminate foil of graphite and copper, with:a width of 610 mm or more but not more than 620 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric rechargeable batteries	1,3 %	—	31.12.2020
0.3352	ex74102100	10	Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil	0 %	—	31.12.2023
0.7509	ex74102100	20	Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards	0 %	m2	31.12.2023
0.3005	ex74102100	30	Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil	0 %	—	31.12.2023
0.3926	ex74102100	40	Sheet or plates:consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, orconsisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm	0 %	—	31.12.2023
0.4479	ex74102100	50	Plates:consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, andwith a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC‐TM-650	0 %	—	31.12.2023
0.7341	ex74130000	20	Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed	0 %	—	31.12.2022
0.2447	ex74199990ex76169990	9160	Disc (target) with deposition material, consisting of molybdenum silicide:containing 1mg/kg or less of sodium, andmounted on a copper or aluminium support	0 %	—	31.12.2023
0.7911	ex75062000	10	Sheets and strips in coils of nickel alloy C276 (EN 2.4819) witha thickness of 0,5 mm or more but not more than 3 mm,a width of 770 mm or more but not more than 1250 mm	0 %	—	31.12.2024
0.7913	ex75062000	20	Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:a thickness of 0,5 mm or more but not more than 3 mm,a width of 250 mm or more but not more than 1219 mm	0 %	—	31.12.2025
0.5890	76012020		Slabs and billets of unwrought aluminium alloys	4 %	—	31.12.2023
0.4259	ex76012020	10	Slabs and billets of aluminium alloy containing lithium	0 %	—	31.12.2022
0.7752	ex76042100	10	Hollow profile with:one closed chamber of aluminium alloy 6063-T5 or 6060-T5,a wall thickness of not more than 0,7 mm, andan anodized layer of 10 μm at the surface,for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases	0 %	—	31.12.2024
0.5029	ex76042910ex76061299ex76061299	102125	Sheets and bars of aluminium-lithium alloys	0 %	—	31.12.2022
0.6417	ex76042910	40	Bars and rods of aluminium alloys containing by weight:0,25 % or more but not more than 7 % of zinc, and1 % or more but not more than 3 % of magnesium, and1 % or more but not more than 5 % of copper, andnot more than 1 % of manganese,consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process	0 %	—	31.12.2024
0.2410	ex76051900	10	Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm	0 %	—	31.12.2023
0.6418	ex76052900	10	Wire of aluminium alloys containing by weight:0,10 % or more but not more than 5 % of copper, and0,2 % or more but not more than 6 % of magnesium, and0,10 % or more but not more than 7 % of zinc, andnot more than 1 % of manganese,consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process	0 %	m	31.12.2024
0.5487	ex76071190ex76071190ex76071190ex76071190ex76071190ex76071190	484951525356	Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %	0 %	—	31.12.2021
0.4050	ex76071190ex76071190	6567	Plain aluminium foil with the following parameters:an aluminium content of 99,98 % or more,a thickness of 0,070 mm or more but not more than 0,125 mm,with a cubic texture,of a kind used for high voltage etching	3.7 %	—	31.12.2021
0.5312	ex76071990ex85079080	1080	Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:a width of 595 mm or more but not more than 605 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries	0 %	—	31.12.2021
0.7698	ex76072090	10	Aluminium foil, in rolls:coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,with a width of 200 mm or more, but not more than 400 mm,with a thickness of 0,138 mm or more, but not more than 0,168 mm,for use in the manufacture of lithium-ion battery cell covers	3.7 %	—	31.12.2021
0.7746	ex76082081	20	Seamless aluminium alloyed extruded tubes (Aluminium 6061F according to standard ASTM B241) with:an outer diameter of 320 mm or more but not more than 400 mm, anda wall thickness of 8 mm or more but not more than 10 mm,for use in the manufacture of high pressure vessels	0 %	—	31.12.2024
0.6138	ex76082089	30	Seamless aluminium alloyed extruded tubes with:an outer diameter of 60 mm or more but not more than 420 mm, anda wall thickness of 10 mm or more but not more than 80 mm	0 %	—	31.12.2023
0.7747	ex76082089	40	Seamless flow forming aluminium alloyed tubes (Aluminium 6061A according to standard ISO 7866) with:an outer diameter of 378 mm or more but not more than 385 mm, anda wall thickness of 4 mm or more but not more than 7 mm,for use in the manufacture of high pressure vessels	0 %	—	31.12.2024
0.2445	ex76130000	20	Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg	0 %	p/st	31.12.2023
0.3928	ex76169990	15	Honeycomb aluminium blocks for use in the manufacture of aircraft parts	0 %	p/st	31.12.2023
0.6534	ex76169990	25	Metallised film:consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,with an optical density of each aluminium layer of not more than 3.0,with each aluminium layer separated by a resin layer,on a carrier film of PET, andon rolls of up to 50000 metres in length	0 %	—	31.12.2024
0.7997	ex76169990	35	Aluminium plate with:a length of 36 mm or more but not more than 49 mm,a width of 29,8 mm or more but not more than 45,2 mm,a thickness of 0,18 mm or more but not more than 0,66 mm,equipped with a polypropylene tape with:a length of 6,5 mm or more but not more than 16,5 mm,a width of 39 mm or more but not more than 56 mm,characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,resistance to influence of electrolyte,for use in the manufacture of lithium-ion battery cells for motor vehicle batteries	3 %	—	31.12.2021
0.5357	ex76169990ex84828000ex88033000	701040	Connecting components for use in the production of helicopter tail rotor shafts	0 %	p/st	31.12.2021
0.6730	ex81019600	10	Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μma resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre	0 %	—	31.12.2025
0.7245	ex81019600	20	Tungsten wirecontaining by weight 99,95 % or more of tungsten, andwith a maximum cross-sectional dimension of not more than 1,02 mm	0 %	—	31.12.2022
0.5694	ex81021000	10	Molybdenum powder with:a purity by weight of 99 % or more, anda particle size of 1,0 μm or more, but not more than 5,0 μm	0 %	—	31.12.2022
0.6450	ex81039090	10	Tantalum sputtering target with:a copper-chromium alloy backing plate,a diameter of 312 mm, anda thickness of 6,3 mm	0 %	p/st	31.12.2024
0.7966	ex81041900	10	Unwrought magnesium containing 90 % or more but not more than 99,7 % by weight of magnesium	0 %	—	31.12.2025
0.5097	ex81043000	35	Magnesium powder:of purity by weight of more than 99,5 %, andwith a particle size of not more than 0,8 mm	0 %	—	31.12.2025
0.3417	ex81049000	10	Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light	0 %	—	31.12.2023
0.5838	ex81059000	10	Bars or wires made of cobalt alloy containing by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium, and7 % (± 2 %) iron,conforming to the material specifications AMS 5842	0 %	—	31.12.2023
0.3416	ex81082000	10	Titanium sponge	0 %	—	31.12.2023
0.4553	ex81082000	30	Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm	0 %	—	31.12.2023
0.6942	ex81082000	40	Titanium alloy ingot:with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 6 % of aluminium,2,5 % or more but not more than 5 % of tin,2,5 % or more but not more than 4,5 % of zirconium,0,2 % or more but not more than 1 % of niobium,0,1 % or more but not more than 1 % of molybdenum,0,1 % or more but not more than 0,5 % of silicon	0 %	p/st	31.12.2020
0.6943	ex81082000	55	Titanium alloy ingot:with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 7 % of aluminium,1 % or more but not more than 5 % of tin,3 % or more but not more than 5 % of zirconium,4 % or more but not more than 8 % of molybdenum	0 %	p/st	31.12.2020
0.6944	ex81082000	60	Titanium alloy ingot,with a diameter of 63,5 cm or more and a length of 450 cm or more,a weight of 6350 kg or more,containing alloy elements by weight of:5,5 % or more but not more than 6,7 % of aluminium,3,7 % of more but not more than 4,9 % of vanadium	0 %	p/st	31.12.2020
0.7310	ex81082000	70	Titanium alloy slab, with:a height of 20,3 cm or more, but not more than 23,3 cm,a length of 246,1 cm or more, but not more than 289,6 cm,a width of 40,6 cm or more, but not more than 46,7 cm,a weight of 820 kg or more but not more than 965 kg,containing alloy elements by weight of:5,2 % or more but not more than 6,2 % of aluminium,2,5 % or more but not more than 4,8 % of vanadium	0 %	p/st	31.12.2022
0.3211	ex81083000	10	Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium	0 %	—	31.12.2023
0.4363	ex81089030	10	Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040	0 %	—	31.12.2024
0.7330	ex81089030	15	Rods and wire of an alloy of titanium with:a uniform solid cross-section in the form of a cylinder,with a diameter of 0,8 mm or more, but not more than 5 mm,an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,a silicon content by weight of 0,3 % or more, but not more than 0,6 %,a niobium content by weight of 0,1 or more, but not more than 0,3 %, andan iron content by weight of not more than 0,2 %	0 %	—	31.12.2022
0.7942	ex81089030	35	Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm	0 %	—	31.12.2025
0.4904	ex81089030	45	Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967	0 %	—	31.12.2025
0.8105	ex81089030	55	Wires of an alloy of titanium:with a niobium content by weight of 42 % or more but not more than 47 %,with a diameter of not more than 6 mm,complying with standard AMS 4982,for use in the production of aerospace fasteners	0 %	—	31.12.2025
0.7077	ex81089030	60	Forged cylindrical bars of titanium with:a purity of 99,995 % by weight or more,a diameter of 140 mm or more but not more than 200 mm,a weight of 5 kg or more but not more than 300 kg	0 %	p/st	31.12.2021
0.5351	ex81089030	70	Wire of an titanium alloy containing by weight:22 % (± 1 %) of vanadium, and4 % (±0,5 %) of aluminium,or:15 % (± 1 %) of vanadium,3 % (±0,5 %) of chromium,3 % (±0,5 % of tin, and3 % (±0,5 %) of aluminium	0 %	—	31.12.2021
0.7285	ex81089050	45	Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:a thickness of 0,4 mm or more, but not more than 100 mm,a length of not more than 14 m, anda width of not more than 4 m	0 %	—	31.12.2022
0.5352	ex81089050	55	Plates, sheets, strip and foil of an alloy of titanium	0 %	—	31.12.2021
0.6524	ex81089050	80	Plates, sheets, strips and foil of non-alloyed titanium:of a width of more than 750 mm,of a thickness of not more than 3 mm	0 %	—	31.12.2024
0.6500	ex81089050	85	Strip or foil of non-alloyed titanium:containing more than 0,07 % by weight of oxygen (O2),of a thickness of 0,4 mm or more but not more than 2,5 mmconforming to the Vickers hardness HV1 standard of not more than 170,of a kind used in the manufacture of welded tubes for nuclear power plant condensers	0 %	—	31.12.2024
0.7293	ex81089060	30	Seamless tubes and pipes of titanium or an alloy of titanium with:a diameter of 19 mm or more but not more than 159 mm,a wall thickness of 0,4 mm or more but not more than 8 mm, anda maximum length of 18 m	0 %	—	31.12.2022
0.5353	ex81089090ex90039000	3020	Parts of spectacle frames and mountings, includingtemples,blanks of a kind used for the manufacture of spectacle parts, andbolts of the kind used for spectacle frames and mountings,of a titanium alloy	0 %	p/st	31.12.2021
0.2515	ex81092000	10	Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry	0 %	—	31.12.2023
0.3415	ex81101000	10	Antimony in the form of ingots	0 %	—	31.12.2023
0.3413	ex81129930	10	Alloy of niobium (columbium) and titanium, in the form of bars and rods	0 %	—	31.12.2023
0.5354	ex81130020	10	Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide	0 %	—	31.12.2023
0.4316	ex81130090	10	Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits	0 %	—	31.12.2022
0.6805	ex81130090	20	Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules	0 %	—	31.12.2025
0.6416	ex82071910	10	Inserts for drilling tools with working parts of agglomerated diamonds	0 %	p/st	31.12.2024
0.5570	ex82073010	10	Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles	0 %	p/st	31.12.2022
0.7693	ex83012000	10	Mechanical or electromechanical steering column lock:with a height of 10,5 cm (± 3 cm),with a width of 6,5 cm (± 3 cm),in a metal housing,whether or not with a holder,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
0.5024	ex83016000ex84199085ex84799070ex84819000ex85030099ex85159080ex85371098ex85389099ex87089910ex87089997	30403050434055705522	Silicone or plastic keyboards, comprising:parts of common metal, andwhether or not comprising parts of plastic,epoxy resin reinforced with fiberglass or wood,whether or not printed or surface-treated,with or without electrical conductors,with or without a membrane bonded to the keyboard,with or without mono or multilayer protective film	0 %	p/st	31.12.2025
0.6954	ex83022000	20	Castors, with:an external diameter of 21 mm or more but not more than 23 mm,a width with screw of 19 mm or more but not more than 23 mm,a U-shaped plastic outer ring,an assembly screw fitted to the internal diameter and used as an inner ring	0 %	p/st	31.12.2020
0.7666	ex83023000	10	Support bracket for an exhaust system:with a thickness of 0,7 mm or more but not more than 1,3 mm,of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,whether or not with mounting holes,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
0.2602	ex83099090	10	Aluminium can ends:with a diameter of 99,00 mm or more but not more than 136,5 mm (±1mm),whether or not with a 'ring-pull' aperture	0 %	p/st	31.12.2023
0.3947	ex84013000	20	Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors	0 %	—	31.12.2023
0.6319	ex84014000	10	Stainless steel absorber control rods, filled with neutron absorbing chemical elements	0 %	p/st	31.12.2024
0.8012	ex84068200	10	Industrial steam turbine with:an output of 5 MW or more but not more than 40 MW,designed for a pressure of not more than 140 bar and a temperature of not more than 540 °C,equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar	0 %	—	31.12.2025
0.3830	ex84073320ex84073380ex84079080ex84079090	10101010	Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of:lawn mowers of subheadings 843311, 843319 and 843320,tractors of subheadings 87019190, 87019290 whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cm3 of subheading 84332010, orsnowploughs and snow blowers of subheading 843020	0 %	—	31.12.2022
0.3828	ex84079010	10	Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508	0 %	—	31.12.2021
0.4996	ex84079090	20	Compact Liquid Petroleum Gas (LPG) Engine System, with:6 cylinders,an output of 75 kW or more, but not more than 80 kW,inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 8427	0 %	—	31.12.2025
0.2598	ex84089041	20	Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems	0 %	—	31.12.2023
0.2595	ex84089043	20	Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems	0 %	—	31.12.2023
0.5544	ex84089043ex84089045ex84089047	403050	4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:a capacity of not more than 3850 cm3, anda rated output of 15 kW or more but not more than 85 kW,for use in the manufacture of vehicles of heading 8427	0 %	—	31.12.2022
0.7027	ex84099100	40	Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark‐ignition internal combustion piston engines of motor vehicles	0 %	—	31.12.2021
0.6752	ex84099100ex84099900	5055	Exhaust manifold with turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm	0 %	p/st	31.12.2023
0.7670	ex84099100	25	Air intake module for engine cylinders consisting of:a suction pipe,a pressure sensor,an electric throttle,hoses,brackets,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2023
0.7961	ex84099100ex84819000	5560	Nozzle body for the regulation of angle and distribution of fuel injection:of a cylindrical shape,made of stainless steel,with 4 or more, but not more than 16 holes,with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute	0 %	—	31.12.2025
0.7661	ex84099100	70	Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:a width of 40 mm or more but not more than 70 mm,valves length of 250 mm or more but not more than 350 mm,air volume of 5,2 litres, andan electrical flow control system that provides maximum performance at more than 3200 rpm	0 %	—	31.12.2023
0.7965	ex84099100	75	Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:an inlet diameter of 2 mm or more, but not more than 10 mm,an outlet diameter of 2 mm or more, but not more than 10 mm,an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,a plastic covering moulded around a stainless steel tube	0 %	—	31.12.2025
0.7967	ex84099100ex84819000	8070	Nozzle needle for opening and closing the flow of fuel in the engine, with:2 holes,4 grooves,a diameter of 3 mm or more, but not more than 6 mm,a length of 25 mm or more, but not more than 35 mm,made of stainless steel with hard-chrome plating	0 %	—	31.12.2025
0.5199	ex84099900ex84799070	1085	Injectors with solenoid valve for optimised atomisation in the engine combustion chamber	0 %	p/st	31.12.2021
0.7851	ex84099900	25	Hoses assembly for fuel return from injectors to engine fuel unit, consisting of at least:three rubber hoses, whether or not with a protective braided sleeving,three connectors for connecting fuel injectors,five metal clamps,one T-shaped plastic joint,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2024
0.7160	ex84099900	40	Plastic or aluminium cylinder head cover with:a camshaft position sensor (CMPS),metal brackets for mounting on an engine, andtwo or more gaskets,for use in the manufacture of engines of motor vehicles	0 %	p/st	31.12.2021
0.7236	ex84099900	60	Intake manifold for air supply to the engine cylinders, comprising at least:a throttle,a boost pressure sensor,for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2022
0.7667	ex84099900	65	The exhaust gas recirculation assembly consisting of:a control unit,an air throttle,an intake pipe,an outlet hose,for use in the manufacture of diesel engines of motor vehicles	0 %	—	31.12.2023
0.7234	ex84099900	70	Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2021
0.7718	ex84099900	75	High pressure fuel rail of galvanised ferrite-pearlite steel with:at least one pressure sensor and one valve,a length of 314 mm or more, but not more than 322 mm,an operating pressure not more than 225 MPa,an inlet temperature not more than 95 °C,ambient temperature of – 45 °C or more, but not more than 145 °C,for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2024
0.7233	ex84099900	80	High pressure oil jet nozzle for engine piston cooling and lubrication with:an opening pressure of 1 bar or more, but not more than 3 bar,a closing pressure of more than 0,7 bar,a one-way valve,for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2022
0.7716	ex87089135	20	Turbocharger cooling duct containing:an aluminium alloy duct with at least one metal holder and at least two mounting holes,a rubber pipe with clips,a stainless steel flange highly resistant to corrosion [SUS430JIL],for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2024
0.6751	ex84119900	20	Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,with a heat-resistance of not more than 1100 °C,with a diameter of 28 mm or more, but not more than 180 mm,with a height of 20 mm or more, but not more than 150 mm	0 %	p/st	31.12.2022
0.7225	ex84119900	30	Turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm	0 %	p/st	31.12.2021
0.5975	ex84123900	20	Actuator for a single-stage turbocharger:whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm,with a length of not more than 350 mm,with a diameter of not more than 75 mm,with a height of not more than 110 mm	0 %	p/st	31.12.2023
0.8148	ex84129080	20	Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:a length of 3,5 m or more but not more than 4,3 m,a width of 2 m or more but not more than 3,5 m,a height of 1 m or more but not more than 1,3 m,a weight of 11 tons or more but not more than 20 tons,mounting bores for yaw drive,mounting flange for gearbox support,drivetrain mount,different screw sockets	0 %	p/st	31.12.2025
0.8079	ex84129080	30	Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:a diameter of 2 m or more, but not more than 5 m,a weight of 2 tons or more but not more than 7 tons	0 %	p/st	31.12.2025
0.7161	ex84133020	30	Single-cylinder radial-piston high pressure pump for gasoline direct injection with:an operating pressure of 200 bar or more, but not more than 350 bar,a flow control, anda pressure relief valve,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2021
0.7969	ex84133020	40	High-pressure plunger pump for direct diesel injection, with:an operating pressure of not more than 275 MPa,a camshaft,a fluid discharging of 15 cm3 per minute or more, but not more than 1800 cm3 per minute,an electric pressure regulating valve	0 %	—	31.12.2025
0.7970	ex84133020	50	High-pressure plunger pump for direct diesel injection:with an operating pressure of not more than 275 MPa,designed to contact the crankshaft,with an electromagnetic valve	0 %	—	31.12.2025
0.4903	ex84137035	20	Single phase centrifugal pump:discharging at least 400 cm3 fluid per minute,with a noise level limited to 6 dBA,with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, andworking at ambient temperatures down to -10 °C	0 %	—	31.12.2020
0.6346	ex84139100	30	Fuel pump cover:consisting of aluminium alloys,with a diameter of 38 mm or 50 mm,with two concentric, annular grooves formed on its surface,anodized,of a kind used in motor vehicles with petrol engines	0 %	p/st	31.12.2024
0.7669	ex84141025	30	Tandem pump consisting of:an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1000 revolutions per minute,vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of ‐666 mbar in 6 seconds at 750 revolutions per minute,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2023
0.7691	ex84141089	30	Electric vacuum pump with:Controller Area Network (CAN bus),whether or not with a rubber hose,a connecting cable with connector,a mounting bracket,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
0.8111	ex84143020	20	Hermetic reciprocating refrigeration compressor, for isobutane:with a 3-phase permanent magnet brushless motor,having left side suction connection and Power Factor Correction (PFC) inverter,with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions	0 %	—	31.12.2025
0.8112	ex84143020	30	Hermetic reciprocating refrigeration compressor for isobutane as refrigerant:with a 3-phase permanent magnet brushless motor,having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1300 rpm up to 4500 rpm,with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions	0 %	—	31.12.2025
0.8134	ex84143020	40	Hermetic reciprocating compressor, for isobutane as refrigerant with:a Resistance Start Capacitor Run (RSCR) single phase motor,a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions,a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions	0 %	—	31.12.2025
0.8135	ex84143020	50	Hermetic reciprocating compressor, for isobutane as refrigerant with:a Resistance Start Capacitor Run (RSCR) single phase motor,a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions,a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions	0 %	—	31.12.2025
0.4727	ex84143081	50	Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment	0 %	—	31.12.2024
0.6160	ex84143081ex84148073	6030	Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:driven by "on-off" single phase alternate current (AC) or "brushless direct current" (BLDC) variable speed motors,with a nominal power rating of not more than 1,5 kW,a rated voltage of 100 V or more but not more than 240 V,with a height of not more than 300 mm,an external diameter of not more than 150 mm,with a unit weight of not more than 15 kg,for use in the manufacture of heat pumps for household appliances, including clothes dryers	0 %	—	31.12.2023
0.2593	ex84143089	20	Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW	0 %	—	31.12.2023
0.7694	ex84143089	30	Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2023
0.4891	ex84145925	40	Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 8528	0 %	—	31.12.2020
0.7595	ex84145935	20	Radial fan, with:a dimension of 25mm (height) x 85mm (width) x 85mm (depth),a weight of 120 g,a rated voltage of 13,6 VDC (direct current voltage),an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),a rated current of 1,1 A (TYP),a rated power of 15 W,a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow),an air flow of not more than 17,5 litre/s,an air pressure of not more than 16 mm H2O ≈ 157 Pa,an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), anda FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems	0 %	—	31.12.2023
0.7317	ex84148022	20	Air membrane compressor with:a flow of 4,5 l/min or more, but not more than 7 l/min,power input of not more than 8,1 W, anda gauge pressure capacity not exceeding 400 hPa (0,4 bar),of a kind used in the production of motor vehicle seats	0 %	—	31.12.2022
0.8133	ex84148073	40	Hermetic heat pump compressor, for R134A or R450A as refrigerant:with the Single Phase Induction Motor PSC (Permanent Split Capacitor),having bottom side suction connection and top side discharge connection,8,1 cm3 or 8,2 cm3 displacement,running at 3000 rpm,with a cooling capacity of 920 W or higher, but not higher than 970 W in ASHRAE conditions	0 %	—	31.12.2025
0.2507	ex84149000	20	Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2024
0.3386	ex84149000	30	Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2023
0.4027	ex84149000	40	Drive part, for compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2023
0.6841	ex84159000	30	Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with:a length of 166 mm (+/- 1 mm),a diameter of 70 mm (+/- 1 mm),an internal capacity of 280 cm3 or more,a water absorption rate of 17 g or more, andan internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2,of a kind used in car air-conditioning systems	0 %	p/st	31.12.2020
0.6842	ex84159000	60	Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,a weight of 0,02 kg or more but not more than 0,25 kg	0 %	p/st	31.12.2025
0.6860	ex84159000	65	Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:a length of 143 mm or more but not more than 292 mm,a diameter of 31 mm or more but not more than 99 mm,with a weight of not less than 0,12 kg and not more than 0,9 kg,a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, anda solid particle diameter of not more than 0,06 mm,for use in the manufacture of car air-conditioning systems	0 %	p/st	31.12.2022
0.4133	ex84189910ex84189910	7179	Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles	0 %	p/st	31.12.2021
0.7996	ex84189990	20	Aluminium connecting block for connecting to a condenser manifold in welding process:hardened to T6 or T5 temper,with a weight of not more than 150 g,with a length of 20 mm or more but not more than 150 mm,with a fixing rail in one piece	0 %	—	31.12.2025
0.8004	ex84189990	30	Receiver dryer profile for connecting to a condenser manifold in welding process with:a braze flatness of not more than 0,2 mm,a weight of 100 g or more but not more than 600 g,a fixing rail in one piece	0 %	—	31.12.2025
0.6231	ex84212100	20	Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:ultrafiltration system,carbon filtration system,water softener system,for use in a biopharmaceutical laboratory	0 %	p/st	31.12.2024
0.3375	ex84219990	91	Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder	0 %	p/st	31.12.2023
0.7039	ex84248970	20	Mechanical passenger car headlights washer with telescopic hose, high pressure nozzles and mounting clamps for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
0.5831	ex84312000	30	Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427	0 %	p/st	31.12.2022
0.6193	ex84312000	40	Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427	0 %	p/st	31.12.2023
0.6821	ex84369900	10	Part containing:a single-phase AC motor,an epicyclic gearing,a cutter blade,and whether or not containing:a capacitor,a part fitted with a threaded bolt,for use in the manufacture of garden shredders	0 %	p/st	31.12.2025
0.3374	ex84399900	10	Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more	0 %	p/st	31.12.2023
0.2599	ex84778099	10	Machines for casting or for surface modification of plastic membranes of heading 3921	0 %	p/st	31.12.2023
0.8123	ex84798997	28	Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:electronic brake assistants,hydraulic unit driven by brushless electric motor,brake fluid reservoir,for use in the manufacture of plug-in hybrid passenger cars	0 %	—	31.12.2025
0.7517	ex84798997	35	Mechanical unit ensuring the movement of the camshaft with:8 oil chambers,a phasing range of at least 38°, but not more than 62°,a steel and/or steel alloy sprocket,a steel and/or steel alloy rotor	0 %	—	31.12.2023
0.7979	ex84798997	55	Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode	0.8 %	—	31.12.2021
0.6230	ex84798997	60	Bioreactor for biopharmaceutical cell culture:having interior surfaces of austenitic stainless steel, andwith a process capacity up to 15000 litres,whether or not combined with a 'clean-in-process' system and/or a dedicated paired media hold vessel	0 %	p/st	31.12.2021
0.7982	ex84798997	65	Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line	0.8 %	—	31.12.2021
0.6573	ex84798997	70	Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy	0 %	p/st	31.12.2024
0.6735	ex84798997	85	High Pressure Hard Materials Compression Press ('Link Press'):with a 16000 tonne pressure rating,with a 1100mm diameter Bolster (± 1mm),with a 1400mm main cylinder (± 1mm),with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system,with a double arm manipulator arrangement and connections for piping and electrical systems,with a total weight 310 tonnes (± 10 tonnes), andcreating 30000 atmospheres at 1500 degrees centigrade using Low Frequency Alternating Current (16000 amps)	0 %	p/st	31.12.2020
0.7964	ex84799070	40	Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:of a circular shape,made of steel alloy with sintering process,with not more than 8 oil chambers,with a Rockwell hardness of 55 or more,with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3	0 %	—	31.12.2025
0.7962	ex84799070	50	Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:with 4 blades that end in grooves,made of steel alloy with sintering process	0 %	—	31.12.2025
0.7158	ex84799070	87	Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles	0 %	p/st	31.12.2021
0.7375	ex84811099	20	Electromagnetic pressure reducing valve:with a plunger,with at least 275 mPa internal tightness,with a plastic connector with 2 silver or tin pins	0 %	—	31.12.2022
0.7424	ex84811099	40	Pressure reducing valves in a brass case with:a length of not more than 30 mm (± 1 mm),a width of not more than 18 mm (± 1 mm),of a kind used for incorporation in fuel delivery modules of motor vehicles	0 %	—	31.12.2022
0.7968	ex84813091ex84813099	3050	Mechanical check (non-return) valve for opening and closing of the flow of fuel:with an operating pressure of not more than 250 MPa,with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,made of steel	0 %	—	31.12.2025
0.4668	ex84813091	91	Steel check (non-return) valves with:an opening pressure of not more than 800 kPa,an external diameter not more than 37 mm	0 %	p/st	31.12.2024
0.7850	ex84813099	30	Brake booster check valve assembly, containing at least:three vulcanized rubber hoses,one membrane valve,two metal clamps,one metal holder,whether or not a connecting metal pipe,for use in the manufacture of motor vehicles	0 %	—	31.12.2024
0.3363	ex84818059	10	Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines	0 %	p/st	31.12.2023
0.7155	ex84818059	20	Pressure regulating valve for incorporation into compressors of motor vehicle air condition units	0 %	p/st	31.12.2021
0.7380	ex84818059	30	Two-way flow control valve with housing, with:at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,at least 330 cm3/minute, but not more than 5000 cm3/minute flow rate,at least 19, but not more than 300 MPa operating pressure	0 %	—	31.12.2022
0.7377	ex84818059	40	Flow-control valve:made of steel,with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,with chromium nitride coating,with a surface roughness of Rp 0,4	0 %	—	31.12.2022
0.7381	ex84818059	50	Electromagnetic valve for quantity control with:a plunger,a solenoid with a of coil resistance of 1,85 Ω or more, but not more than 8,2 Ω	0 %	—	31.12.2022
0.7382	ex84818059	60	Electromagnetic valve for quantity control:with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH	0 %	—	31.12.2022
0.7960	ex84818059ex84819000	7080	Flow-control valvemade of steel,with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm	0 %	—	31.12.2025
0.5575	ex84818069	60	Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valve,a brass valve body including valve slider and copper connections,with a working pressure up to 4,5 MPa	0 %	p/st	31.12.2022
0.7519	ex84818073ex84818099	2070	Pressure- and flow-control valve controlled by external electromagnet:made of steel and/or steel alloy(s),without integrated circuit,of not more than 1000 kPa operating pressure,with a flow quantity of not more than 5 l/min,without an electromagnet	0 %	—	31.12.2023
0.7637	ex84818079ex84818099	3030	Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:a withstanding pressure of the valve body of 6,3 MPa,a leakage ratio of less than 1,6 g/a,an impurity ratio of less than 1,2 mg/PCS,an airtight pressure of the valve body of 4,2 MPa,for use in the manufacture of air conditioners	0 %	—	31.12.2023
0.7518	ex84819000	40	Valve armature:for the opening and closing of the flow of fuel,consisting of a shaft and a blade,with at least 3 but not more than 8 holes on the blade,made of metal and/or metal alloy(s)	0 %	—	31.12.2023
0.6391	ex84821010ex84821090ex84825000	101010	Ball and cylindrical bearings:with an outside diameter of 28 mm or more but not more than 140 mm,with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa,for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants	0 %	p/st	31.12.2024
0.7735	ex84821010	15	Ball bearings with:an internal diameter of 4 mm or more but not more than 9 mm,an external diameter of not more than 26 mm,a width of not more than 8 mm,for use in the manufacture of electromotors with a range of 40000 rpm or more but not more than 80000 rpm	0 %	—	31.12.2024
0.7707	ex84821010ex84821090	2540	Double row ball bearings / ball bearing cartridges:with an internal diameter of 3 mm or more, but not more than 9 mm,with an external diameter of 17 mm or more, but not more than 36 mm,with a width of 6 mm or more, but not more than 69 mm,manufactured according to ISO standard 492 - Class 5 or DIN 620 - P5 or ANSI Standard 20 - ABEC 5,with ceramic balls,for use in turbo compressors (turbochargers)	0 %	—	31.12.2024
0.8098	ex84825000	20	Axial roller bearing made of steel:the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,the rollers are made of anti-friction steel according to ASTM 295-94,with an external diameter of 63 mm or more but not more than 66 mm,with an internal diameter of 44 mm or more but not more than 46 mm,with a weight of 23 g or more but not more than 27 g,with 36 rollers or more but not more than 38 rollers	0 %	p/st	31.12.2025
0.8088	ex84829900	40	Inner and outer rings made of steel, not grinded, with an internal raceway, with diameters of:14,66 mm or more but not more than 76,2 mm for the inner ring, and26 mm or more but not more than 100 mm for the outer ring	0 %	—	31.12.2025
0.5744	ex84833032ex84833038	3060	Bearing housing of a kind used in turbochargers:of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,with oil chambers,without bearings,with a diameter of 50 mm or more, but not more than 250 mm,with a height of 40 mm or more, but not more than 150 mm,whether or not with water chambers and connectors	0 %	p/st	31.12.2022
0.5202	ex84834029	50	Gear set of cycloid gear type with:a rated torque of 50 Nm or more but not more than 9000 Nm,standard ratios of 1:50 or more but not more than 1:475,lost motion of not more than one arc minute,an efficiency of more than 80 %,of a kind used in robot arms	0 %	p/st	31.12.2021
0.5977	ex84834029	60	Epicyclic gearing, of a kind used in driving hand-held power tools with:a rated torque of 25 Nm or more, but not more than 70 Nm,standard gear ratios of 1:12.7 or more, but not more than 1:64.3	0 %	p/st	31.12.2023
0.2503	ex84834051	20	Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151	0 %	p/st	31.12.2023
0.7920	ex84834059	30	Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of lawn mowers of Subheadings 843311 and 843319 or other mowers of Subheading 843320	0 %	p/st	31.12.2024
0.2706	ex84834059ex87089997	2012	Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of lawn mowers of subheadings 843311 and 843319, other mowers of subheading 843320, or tractors of subheadings 87019190, and 87019290, whose main function is that of a lawn mower	0 %	p/st	31.12.2023
0.7249	ex84834090	20	Hydrostatic transmission with:measurements (without shafts) of not more than 154 mm x 115 mm x 108 mm,a weight of not more than 3,3 kg,a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,a torque of the output shaft of not more than 10,4 Nm,a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, andan operating temperature range of -5 °C or more, but not more than +40 °Cfor use in the manufacture of hand-operated lawn mowers of subheading 84331190	0 %	p/st	31.12.2022
0.7248	ex84834090	30	Hydrostatic transmission with:a reduction of 20,63:1 or more, but not more than 22,68:1,an input speed of 1800 rpm or more when loaded and of not more than 3000 rpm when unloaded,a continuous output torque of 142 Nm or more, but not more than 156 Nm,an intermittent output torque of 264 Nm or more, but not more than 291 Nm, andan axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm,whether or not equipped with a fan impeller or with a pulley with integrated fan impeller,for use in the production of self-propelled lawn mowers with a seat of subheading 84331151, and tractors of subheading 87019190, whose main function is that of a lawn mower	0 %	p/st	31.12.2022
0.4997	ex84834090	80	Transmission gearbox, with:not more than 3 gears,an automatic deceleration system, anda power reversal system,for use in the manufacture of goods of heading 8427	0 %	p/st	31.12.2025
0.8100	ex84835080	20	Pulley blocks of non-cast steel:made of structural carbon steel complying with standard JIS G4051,with an external diameter of 114 mm or more but not more than 118 mm,with an internal diameter of 33 mm or more but not more than 37 mm,with a width of 29 mm or more but not more than 33 mm,with a weight of 0,6 kg or more but not more than 0,9 kg,with 6 trapezoidal grooves	0 %	p/st	31.12.2025
0.7156	ex84842000	10	Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units	0 %	p/st	31.12.2021
0.7604	ex84842000	20	Mechanical face sealing device made of two movable rings (one ceramic mating with a thermal conductivity lower than 80 W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side	0 %	—	31.12.2023
0.6854	ex85011010	20	Synchronous motor for a dishwasher with a water flow control mechanism witha length without axle of 24 mm (± 0,3),a diameter of 49,3 mm (± 0,3),a rated voltage of 220 V AC or more but not more than 240 V AC,a rated frequency of 50 Hz or more but not more than 60 Hz,an input power of not more than 4 W,a rotation speed of 4rpm or more but not more than 4,8rpm,an output torque of not less than 10kgf/cm	0 %	—	31.12.2022
0.7601	ex85011010	30	Motors for air pumps, with:operating voltage of 9 VDC or more but not more than 24 VDC,operating temperature range of -40°C or more but not more than 80°C,an output not exceeding 18 W,for use in the manufacture of pneumatic support and ventilation systems for car seats	0 %	—	31.12.2023
0.7857	ex85011010	40	Synchronous hybrid stepper motor with:an output not exceeding 18 W,two phases,a rated current of not more than 2,5 A/phase,a rated voltage of not more than 20 V,with or without a threaded shaft,for use in the manufacture of 3D printers	0 %	—	31.12.2024
0.7197	ex85011099	56	DC Motor:with a speed rotation of not more than 7000 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximum power of 13,78 W ( at 3,09 A),with a specified temperature range from -40 °C to 160 °C,with a gear connection,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 100 Nm	0 %	—	31.12.2021
0.7198	ex85011099	58	DC Motor:with a speed rotation of not more than 6500 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximal power below than 20 W,with a specified temperature range from -40°C to 160°C,with a worm gear drive,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 75 Nm	0 %	—	31.12.2021
0.5846	ex85011099	60	DC motor:with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded,with a power supply voltage of 100 V or more but not more than 240 V,for use in the manufacture of electric fryers	0 %	—	31.12.2022
0.6858	ex85011099	64	DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:with Ingress Protection (IP) standard of IP69,with a rotor speed of not more than 6500 rpm when not loaded,with a rated voltage of 12,0 V (± 0,1),of a specified temperature range of – 40 °C or more but not more than + 165 °C,with or without a connecting pinion,with or without an engine connector,with or without a flange,with a diameter of not more than 40 mm (not including the flange),with an overall height of not more than 90 mm (from the base to the pinion)	0 %	—	31.12.2021
0.6880	ex85011099	65	Electric turbocharger actuator, with:a DC motor,an integrated gear mechanism,a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 25 mm,with or without an on-board diagnostics interface	0 %	—	31.12.2025
0.6115	ex85011099	70	DC stepping motor, with:an angle of step of 7,5° (± 0,5°),a two-phase winding,a rated voltage of 9 V or more, but not more than 16,0 Vof a specified temperature range covering at least ‐ 40 °C to + 105 °C,with or without connecting pinion,with or without motor drive connector	0 %	—	31.12.2023
0.6627	ex85011099	75	Permanently excited DC motor witha multiple-phase winding,an external diameter of 28 mm or more but not more than 35 mm,a rated speed of not more than 12000 rpm,a power supply voltage of 8 V or more but not more than 27 V	0 %	—	31.12.2025
0.2838	ex85011099	79	DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20 °C to + 70 °C	0 %	—	31.12.2023
0.4555	ex85011099	80	DC stepping motor, with:an angle of step of 7,5° (± 0,5°),a pull-out torque at 25 °C of 25 mNm or more,a pull-out pulse rate of 1500 pps or more,a two-phase winding, anda rated voltage of 10,5 V or more, but not more than 16,0 V	0 %	—	31.12.2023
0.7250	ex85012000	30	Universal AC/DC motor with:a rated output of 1,2 kW,a supply voltage of 230 V, andengine brake,assembled to a reduction gear with output shaft, which is contained in a plastic housing,for use as electric drive of lawnmower blades	0 %	—	31.12.2022
0.4201	ex85013100	30	DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (±1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)	0 %	—	31.12.2021
0.4731	ex85013100	37	Permanently excited DC motor witha multiple-phase winding,an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,a rated speed of not more than 15000 rpm,an output of 45 W or more but not more than 400 W, anda supply voltage of 9 V or more but not more than 50 V,whether or not with a drive disc,whether or not with a crankcase,whether or not with a fan,whether or not with a cap assembly,whether or not with a sun gear,whether or not with a speed and rotational direction encoder,whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,whether or not with a mounting flange	0 %	—	31.12.2024
0.5954	ex85013100	45	DC motors, brushless, with:an external diameter of 90 mm or more, but not more than 110 mm,a rated speed of not more than 3680 rpm,an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 °C,a supply voltage of 12 V,a torque of not more than 5,67 Nm,a rotor position sensor,an electronic star-point relay, andfor use with an electric power steering control module	0 %	—	31.12.2023
0.5577	ex85013100	50	DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 9 V or more, but not more than 16 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without a pulley,with or without an electronic power steering sensor/controller	0 %	—	31.12.2022
0.6809	ex85013100ex85013200	4355	Automotive-ready, brushless and permanently excited direct current motor with:a specified speed of not more than 4100 rpm,a minimum output of 400 W, but not more than 1,3 kW (at 12V),a flange diameter of 85 mm or more but not more than 200 mm,a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,a housing length of not more than 265 mm, measured from the flange to the outer ending,a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, andsurface magnets,whether or not with electronic power steering controller,whether or not with pulley,whether or not with rotor position sensor	0 %	—	31.12.2025
0.5978	ex85013100ex85013200	5540	DC motor with or without commutator, with:an external diameter of 24,2 mm or more, but not more than 140 mm,a rated speed of 3300 rpm or more, but not more than 26200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of more than 37,5 W, but not more than 2400 W,a free load current of not more than 20,1 A,a maximum efficiency of 50 % or more,for driving hand-held power tools or lawn mowers	0 %	—	31.12.2023
0.7005	ex85013100	75	Brushless DC motor assembly comprised of a motor and transmission, with:electronic control operating by Hall Effect position sensors,voltage input 9 V or more but not more than 16 V,external diameter of the motor 70 mm or more but not more than 80 mm,output motor power 350 W or more but not more than 550 W,maximum output torque 50 Nm or more but not more than 52 Nm,maximum output rotation speed 280 rpm or more but not more than 300 rpm,coaxial male spline outputs of outer diameter 20 mm (±1 mm), 17 teeth and minimum length of teeth 25 mm (± 1 mm), andwith distance between root of splines 119 mm (± 1 mm),for use in the manufacture of all-terrain or utility task vehicles	0 %	—	31.12.2021
0.4855	ex85013300ex85014080ex85015350	305010	Electric drive for motor vehicles, with an output of not more than 315 kW:with an AC or DC motor with or without transmission,with or without power electronics	0 %	—	31.12.2021
0.5329	ex85015100ex85015220	3050	AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with:an output of 340 W or more but not more than 7,4 kW,a flange of dimensions of not more than 180 mm × 180 mm, anda length from flange to extreme end of resolver of not more than 271 mm	0 %	—	31.12.2021
0.6511	ex85015350	20	AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with:a torque output of 200 Nm or more, but not more than 400 Nm,a power output of 50 kW or more, but not more than 200 kW,a rotation speed of no more than 15000 rpm,for use in the manufacture of electric vehicles	0 %	—	31.12.2024
0.6676	ex85016120	35	Fuel cell module, AC generator with an output of 7,5 kVA or less, consisting of:a Hydrogen generator (desulphurizer, reformer and cleaner),a PEM fuel cell stack, andan Inverter,for use as a part in a heating appliance	0 %	—	31.12.2020
0.5633	ex85016200	30	Fuel cell system:consisting of at least phosphoric acid fuel cells,in a housing with integrated water management and gas treatment,for permanent, stationary energy supply	0 %	—	31.12.2022
0.8130	ex85016200	40	AC, 3-phase generator, with:a continuous power of 147 kVA or more but not more than 222 kVA,a continuous torque of 650 Nm or more but not more than 900 Nm,a maximum working speed of 2700 revolutions per minute (rpm),a liquid cooled system,a length of 100 mm or more but not more than 200 mm,a width of 550 mm or more but not more than 650 mm,a height of 550 mm or more but not more than 650 mm,weighing of not more than 150 kg	0 %	—	31.12.2025
0.2837	ex85030091ex85030099	3132	Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring	0 %	p/st	31.12.2023
0.2836	ex85030099	31	Stamped collector of an electric motor, having an external diameter of not more than 16 mm	0 %	p/st	31.12.2023
0.4599	ex85030099	33	Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm	0 %	p/st	31.12.2021
0.4601	ex85030099	34	Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm	0 %	p/st	31.12.2024
0.7496	ex85030099	37	Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with:diameter of the rotor body of 17 mm or more but not more than 37 mm,length of the rotor body of 12 mm or more but not more than 36 mm,shaft length of 52 mm or more but not more than 82 mm	0 %	—	31.12.2023
0.5783	ex85030099	40	Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 8501	0 %	p/st	31.12.2022
0.6161	ex85030099	55	Stator for brushless motor, with:an internal diameter of 206,6 mm (± 0,5),an external diameter of 265,0 mm (± 0,2), anda width of 37,2 mm or more but not more than 47,8 mm,of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums	0 %	p/st	31.12.2025
0.6379	ex85030099	60	Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (±0,25 mm)	0 %	p/st	31.12.2024
0.7760	ex85030099	65	Rotor body of stacked electrical sheet having:a diameter of 18 mm or more but not more than 35 mm, anda length of 20 mm or more but not more than 65 mm	0 %	—	31.12.2024
0.7761	ex85030099	75	Stator body of stacked electrical sheet having:an inner diameter of 18 mm or more, but not more than 35 mm,an outer diameter of 35 mm or more, but not more than 65 mm, anda length of 20 mm or more, but not more than 65 mm	0 %	—	31.12.2024
0.7758	ex85030099	80	Steel motor housing having:an inner diameter of 35 mm or more but not more than 65 mm,an outer diameter of 35 mm or more but not more than 70 mm, anda length of 35 mm or more but not more than 150 mm	0 %	—	31.12.2024
0.7549	ex85043180	15	Electrical Transformer with:a capacity of 192 Watts or 216 Watts,dimensions of not more than 27,1 x 26,6 x 18 mm,an operating temperature range of - 40 °C or more, but not more than + 125 °C,three or four inductively coupled copper wire windings, and9 connection pins at the bottom	0 %	—	31.12.2023
0.7548	ex85043180	25	Electrical Transformer with:a capacity of 432 Watts,dimensions of not more than 24 mm x 21 mm x 19 mm,an operating temperature range of - 20 °C or more, but not more than + 85 °C,two windings, and5 connection pins at the bottom	0 %	—	31.12.2023
0.4450	ex85043180	30	Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters	0 %	—	31.12.2023
0.7547	ex85043180	35	Electrical Transformer with:a capacity of 433 Watts,dimensions of not more than 37,3 x 38,2 x 28,5 mm,an operating temperature range of - 40 °C or more, but not more than + 125 °C,four inductively coupled copper wire windings, and13 connection pins at the bottom	0 %	—	31.12.2023
0.5598	ex85043180	40	Electrical transformers:with a capacity of 1 kVA or less,without plugs or cables,for internal use in the manufacture of set top boxes and TVs	0 %	—	31.12.2022
0.7551	ex85043180	45	Electrical Transformer with:a capacity of 0,2 Watts,dimensions of not more than 15 mm x 15,5 mm x 14 mm,an operating temperature range of - 10 °C or more, but not more than + 125 °C,two inductively coupled copper wire windings,5 connection pins at the bottom, anda copper shielding	0 %	—	31.12.2023
0.7000	ex85043180	50	Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry	0 %	—	31.12.2021
0.7764	ex85043180	55	Electrical transformer with:a capacity of 0,22 kVA or more, but not more than 0,24 kVA,an operating temperature range of + 10°C or more, but not more than + 125°C,four or five inductively coupled copper wire windings,11 or 12 connection pins at the bottom, anddimensions of not more than 32 mm x 37,8 mm x 25,8 mm	0 %	—	31.12.2024
0.7029	ex85051100	47	Articles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:a length of 9 mm or more but not more than 105 mm,a width of 5 mm or more but not more than 105 mm, anda height of 2 mm or more but not more than 55 mm	0 %	—	31.12.2021
0.5584	ex85051100	50	Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,of a kind to be used in the manufacture of electric servomotors for industrial automation	0 %	p/st	31.12.2022
0.7567	ex85051100	53	Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with:a length of 97,5 mm or more, but not more than 225 mm,a diameter of 19 mm or more, but not more than 25 mm	0 %	—	31.12.2023
0.5585	ex85051100	63	Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with:an external diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation	0 %	p/st	31.12.2022
0.3740	ex85051100	65	Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having:a length of not more than 140 mm,a width of not more than 90 mm, anda thickness of not more than 55 mm,or in the shape of curved rectangle (tile type) having:a length of not more than 75 mm,a width of not more than 40 mm,a thickness of not more than 7 mm, anda radius of curvature of more than 86 mm but not more than 241 mm,or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre	0 %	p/st	31.12.2023
0.7788	ex85051100	68	Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:a length of 13,8 mm or more but not more than 45,2 mm,a width of 7,8 mm or more but not more than 25,2 mm,a height of 1,3 mm or more but not more than 4,7 mm	0 %	—	31.12.2024
0.5948	ex85051100	70	Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet:whether or not containing a hole in the centre,with a diameter of not more than 90 mm,of a kind used in car loudspeakers	0 %	—	31.12.2023
0.6857	ex85051100ex85051990	7335	Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:a length of 5 mm or more, but not more than 60 mm,a width of 5 mm or more, but not more than 40 mm,a thickness of 3 mm or more, but not more than 15 mm	0 %	p/st	31.12.2022
0.6347	ex85051100	75	A quarter sleeve intended to become permanent magnet after magnetization:consisting of at least neodymium, iron and boron,with a width of 9,1 mm or more but not more than 10,5 mm,with a length of 20 mm or more but not more than 30,1 mm,of a kind used on rotors for the manufacture of fuel pumps	0 %	p/st	31.12.2024
0.7789	ex85051910	20	Arc segments of permanent magnets of agglomerated ferrite, with:a length of 16,8 mm or more, but not more than 110,2 mm,a width of 14,8 mm or more, but not more than 75,2 mm,a thickness of 4,8 mm or more, but not more than 13,2 mm,for use in the manufacture of electromotor rotors for ventilation and air-conditioning systems	0 %	—	31.12.2024
0.5937	ex85051990	30	Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT	0 %	—	31.12.2023
0.7299	ex85051990	50	Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation:whether or not with bevelled edges,of a length of 27 mm or more but not more than 32 mm (±0,15 mm),of a width of 8,5 mm or more but not more than 9,5 mm (+0,05 mm / -0,09 mm),of a thickness of 5,5 mm or more but not more than 5,8 mm (+ 0/‐ 0,2 mm), andof a weight of 6,1 g or more but not more than 8,3 g	0 %	p/st	31.12.2022
0.7511	ex85051990	60	Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, intended to become permanent magnets after magnetisation, with the following dimensions:a length of 10 mm or more but not more than 100 mm (± 1 mm),a width of 10 mm or more but not more than 100 mm (± 1 mm),a thickness of 2 mm or more but not more than 15 mm (±0,15 mm)	0 %	—	31.12.2023
0.4029	ex85052000	30	Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2023
0.8095	ex85059090	20	Electromagnetic clutch coil in a cylindrical metal housing:the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,the coil is made of copper wire,with a weight of 0,4 kg or more but not more than 0,7 kg,with a width of 22 mm or more but not more than 25 mm,with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,with an external diameter of 88 mm or more but not more than 96 mm,without plunger,with one connector	0 %	p/st	31.12.2025
0.6855	ex85065010	10	Lithium cylindrical primary cells with:a diameter of 14,0 mm or more but not more than 26,0 mm,a length of 2,2 mm or more but not more than 51 mm,a voltage of 1,5 V or more, but not more than 3,6 V,a capacity of 0,15 Ah or more, but not more than 5,00 Ah,for use in the manufacture of telemetry and medical devices, electronic meters or remote controls	0 %	—	31.12.2021
0.7416	ex85065030	10	Lithium manganese dioxide cell, with:a diameter of 20 mm or more but not more than 25 mm,a length of 3 mm or more but not more than 6 mm,a voltage of 3 V or more but not more than 3,4 V,a capacity of 200 mAh or more but not more than 600 mAh,an automotive test temperature range from -40 °C to +125 °C,for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS)	0 %	—	31.12.2022
0.2490	ex85065090	10	Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V	0 %	—	31.12.2023
0.2488	ex85065090	30	Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah	0 %	—	31.12.2023
0.5180	ex85069000	10	Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)	0 %	—	31.12.2023
0.7641	ex85076000	58	Prismatic lithium-ion electric accumulator with:a width of 120,0 mm or more but not more than 305,0 mm,a thickness of 12,0 mm or more but not more than 67,0 mm,a height of 72,0 mm or more but not more than 126,0 mm,a nominal voltage of 3,6 V or more but not more than 3,75 V, anda nominal capacity of 6,9 Ah or more not more than 265 Ah,for use in the manufacture of rechargeable electric vehicle batteries	1.3 %	—	31.12.2021
0.6685	ex85076000	15	Cylindrical lithium-ion-accumulators or modules with:a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,a nominal voltage of 36 V or more, but not more than 48 V,a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles	1.3 %	—	31.12.2021
0.6625	ex85076000	17	Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:a rated voltage of 12 V,a length of 350 mm or more but not more than 355 mm,a width of 170 mm or more but not more than 180 mm,a height of 180 mm or more but not more than 195 mm,weighing 10 kg or more but not more than 15 kg,a nominal charge of 60 Ah or more, but not more than 80 Ah	1.3 %	—	31.12.2021
0.7663	ex85076000	18	Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:a length of not more than 1600 mm,a width of not more than 448 mm,a height of not more than 395 mm,a nominal voltage of 280 V or more but not more than 400 V,a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,a charging voltage of 110 V or more but not more than 230 V, andcontaining 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703	1.3 %	—	31.12.2021
0.7717	ex85076000	22	Integrated battery system in a metal case with holders, consisting of:a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),Battery Management System,a relay,a low voltage converter (DC/DC),at least one connector,for use in the manufacture of hybrid motor vehicles	1.3 %	—	31.12.2021
0.6697	ex85076000	27	Lithium-ion cylindrical accumulator with:a nominal capacity of 10 Ah or more, but not more than 20 Ah,a nominal voltage of 12,8 V (± 0.05) or more, but not more than 15,2 V (±0,05),a power of 128 Wh or more, but not more than 256 Wh,for use in the manufacture of electric bicycle drives	0 %	—	31.12.2020
0.2907	ex85076000	30	Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries	1.3 %	—	31.12.2021
0.6703	ex85076000	33	Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 1000 mm,a width of 100 mm or more, but not more than 1000 mm,a height of 200 mm or more, but not more than 1500 mm,a weight of 75 kg or more, but not more than 200 kg,a nominal capacity not less than 150Ah and not more than 500 Ah,a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)	1.3 %	—	31.12.2021
0.6702	ex85076000	37	Lithium-ion accumulator, with:a length of 1200 mm or more, but not more than 2000 mm,a width of 800 mm or more, but not more than 1300 mm,a height of 2000 mm or more, but not more than 2800 mm,a weight of 1800 kg or more, but not more than 3000 kg,a nominal capacity of 2800 Ah or more but not more than 7200 Ah	1.3 %	—	31.12.2021
0.8115	ex85076000	48	Integrated battery system in a metal case with holders, consisting of:a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,Battery Management System,a power relay,a cooling system,four connectors,for use in the manufacture of Mild-hybrid (mHEV) motor vehicles	1.3 %	—	31.12.2021
0.5548	ex85076000	50	Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 500 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 75 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda nominal energy of 458 Wh or more, but not more than 2158 Wh	1.3 %	—	31.12.2021
0.5342	ex85076000	65	Cylindrical lithium ion cell with3,5 VDC to 3,8 VDC,300 mAh to 900 mAh, anda diameter of 10,0 mm to 14,5 mm	1.3 %	—	31.12.2021
0.7888	ex85076000	68	Lithium-ion accumulator in a metal housing, witha length of 65 mm or more, but not more than 225 mm,a width of 10 mm or more, but not more than 75 mm,a height of 60 mm or more, but not more than 285 mm,a nominal voltage of 2,1 V or more, but not more than 3,8 V, anda nominal capacity of 2,5 Ah or more, but not more than 325 Ah	1.3 %	—	31.12.2021
0.5356	ex85076000	75	Rectangular lithium-ion-accumulator with:a metal casing,a length of 147,85 mm or more but not more than 173,15 mm,a width of 17,4 mm or more but not more than 21,1 mm,a height of 90,85 mm or more but not more than 95,15 mm,a nominal voltage of 3,3 V or more but not more than 3,65 V, anda nominal capacity of 17,5 Ah or more	1.3 %	—	31.12.2021
0.6753	ex85076000	77	Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mm,a width of 935 mm or more, but not more than 1660 mm,a height of 85 mm or more, but not more than 700 mm,a weight of 250 kg or more, but not more than 700 kg,a power of not more than 175 kWh,a nominal voltage of 400 V	1.3 %	—	31.12.2021
0.4973	ex85076000	85	Lithium-ion modules for incorporation in lithium-ion rechargeable batteries:of a length of 300 mm or more, but not more than 350 mm,of a width of 79,8 mm or more, but not more than 225 mm,of a height of 35 mm or more, but not more than 168 mm,of a weight of 3,95 kg or more, but not more than 8,85 kg,with a rating of 66,6 Ah or more, but not more than 129 Ah	1,3 %	—	31.12.2020
0.7697	ex85079030	20	Safety Reinforced Separator designed to separate cathode and anode in lithium-ion electric accumulators for motor vehicle batteries for use in the manufacture of lithium-ion electric accumulators for motor vehicle batteries	1,3 %	—	31.12.2020
0.5313	ex85079080	70	Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (±0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric rechargeable batteries	0 %	p/st	31.12.2021
0.5012	ex85087000ex85371098	1096	Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W	0 %	p/st	31.12.2020
0.5014	ex85087000ex85371098	2098	Electronic circuit cards that:are connected by wire or radio frequency to each other and the motor controller card, andregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)	0 %	p/st	31.12.2025
0.6304	ex85113000	30	Igniter integrated coil assembly with:an igniter,a coil on plug assembly with an integrated mounting bracket,a housing,a length of 90 mm or more but not more than 200 mm (± 5 mm),an operating temperature of - 40 °C or more but not more than 130 °C,a voltage of 10,5 V or more, but not more than 16 V	0 %	p/st	31.12.2024
0.7024	ex85113000	55	Ignition coil:with a length of 50 mm or more, but not more than 200 mm,with an operating temperature of - 40 °C or more, but not more than 140 °C, andwith a voltage of 9 V or more, but not more than 16 V,with or without connection cable,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2021
0.7025	ex85118000	20	Glow-plug for pre-heating of the diesel engines with:an operating temperature of more than 800 °C,a voltage of 5 V or more, but not more than 16 V,a heating rod containing silicon nitride (Si3N4) and molybdenum disilicide (MoSi2), anda metal housing,for use in the manufacture of diesel engines of motor vehicles	0 %	—	31.12.2021
0.6562	ex85122000	20	Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87	0 %	p/st	31.12.2024
0.6856	ex85122000	30	Lighting module, containing at least:two LEDs,glass or plastic lenses, focusing/scattering the light emitted by the LEDs,reflectors redirecting the light emitted by the LEDs,in an aluminium housing with a radiator, mounted at a bracket with an actuator	0 %	p/st	31.12.2025
0.6503	ex85122000	40	Fog lamp with a galvanised inner surface, containing:a plastic holder with three or more brackets,one or more 12 V bulbs,a connector,a plastic cover,whether or not with a connection cable,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.6504	ex85123090	10	Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:coil,magnet,metal membrane,connector,Holder,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.6863	ex85123090	20	Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holder,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2022
0.7361	ex85123090	30	Sound alarm device for protection against burglary into the vehicle:with an operating temperature of - 45 °C or more, but not more than + 95 °C,with a voltage of 9 V or more but not more than 16 V,in a plastic housing,whether or not with a metal holder,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
0.5983	ex85124000ex85168020	1020	Car door mirror heating foil:with two electrical contacts,with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),with a protective paper film on both sides	0 %	—	31.12.2023
0.6522	ex85142080ex85165000ex85166080	101010	Cavity assembly comprising at least:a transformer with an input of not more than 240 V and an output of not more than 3000 W,an AC or DC fan motor with an output of not more than 42 watts,a housing made of stainless steel,with or without a magnetron of a microwave output power of not more than 900 W,for use in the manufacture of built-in products of subheadings 8514 2080, 8516 5000 and 8516 6080	0 %	p/st	31.12.2024
0.4732	ex85169000	60	Ventilation sub-assembly of an electric deep-fat fryer:fitted with a motor having a power rating of 8 W at 4600 rpm,governed by an electronic circuit,operating at ambient temperatures above 110 °C,fitted with a thermoregulator	0 %	p/st	31.12.2024
0.5845	ex85169000	70	Inner pot:containing side and central openings,of annealed aluminium,with a ceramic coating, heat resistant to more than 200 °C,for use in the manufacture of an electric fryer	0 %	p/st	31.12.2022
0.6521	ex85169000	80	Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of subheadings 85142080, 85165000 and 85166080	0 %	p/st	31.12.2024
0.4733	ex85219000	20	Digital video recorder:without a hard disk drive,with or without a DVD-RW drive,with either motion detection or capability of motion detection through IP connectivity via LAN connector,with or without a USB serial port,for use in the manufacture of closed-circuit television (CCTV) surveillance systems	0 %	—	31.12.2024
0.3108	ex85258019ex85258091	3110	Camera:of a weight of not more than 5,9 kg,without a housing,of dimensions of not more than 405 mm × 315 mm,with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor,with effective pixels of not more than 5 megapixels,for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks	0 %	—	31.12.2023
0.4735	ex85258019	60	Image scanning cameras, using:a 'Dynamic'- or 'Static overlay lines' system,an output NTSC video signal,a voltage of 6,5 V or more,an illuminance of 0,5 lux or more	0 %	—	31.12.2024
0.6694	ex85258019	65	Cameras using MIPI electrical interface with:an image sensor,an objective (lens),a colour processor,a flexible printed circuit board or a printed circuit board,whether or not capable of receiving audio signals,a module dimension of not more than 15 mm x 15 mm x 15 mm,a resolution of 2 mega pixel or more (1616*1232 pixels and higher),whether or not wired, anda housing,for use in the manufacture of products falling within subheading 85171200 or 84713000	0 %	—	31.12.2020
0.4734	ex85258019	70	Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:a sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm,a resolution of up to 640 × 512 pixels,a weight of not more than 400 g,measurements of not more than 70 mm × 86 mm × 82 mm,whether or not in a housing,with automotive- qualified plug, anda deviation of the output signal over the entire work temperature range of not more than 20 %	0 %	—	31.12.2024
0.7972	ex85272900ex85299065	1038	Satellite radio receiver module:with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm,comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,being able to process radio frequency signals,with a medium frequency unit,for use in the manufacture of products falling under heading 8527	0 %	—	31.12.2025
0.6316	ex85285900	20	Liquid crystal display colour video monitor assembly mounted on a frame,excluding those combined with other apparatus,comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,used for permanent incorporation or permanent mounting into entertainment systems for vehicles	0 %	—	31.12.2024
0.7715	ex85285900	30	Electronic device with LCD touch screen display powered by a voltage of 12 V or more but not more than 14,4 V, containing:a LCD control processor,a GPS module,a Bluetooth module,an USB port,a radio signal tuner,whether or not containing DAB module,whether or not containing functions for cooperation with E-CALL,whether or not containing an integrated control panel,whether or not containing connectors,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2024
0.6689	ex85299065	28	Electronic assembly comprising at least:a printed circuit board with,one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,flash memory,operating memory,with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,sockets and plugs for connecting a LCD-display, a LED lighting and a control panel	0 %	p/st	31.12.2025
0.2434	ex85299065ex85489090	3044	Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing	0 %	p/st	31.12.2023
0.4140	ex85299065	50	Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528	0 %	p/st	31.12.2021
0.4893	ex85299065ex85299092	6553	Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module	0 %	p/st	31.12.2025
0.4305	ex85299065	75	Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels	0 %	p/st	31.12.2022
0.3966	ex85299092ex85489090	1560	LCD modules:solely consisting of one or more TFT glass or plastic cells,not combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit, andwith or without inverters	0 %	p/st	31.12.2023
0.4890	ex85299092	25	LCD modules, not combined with touch screen facilities, solely consisting of:one or more TFT glass or plastic cells,a die cast heat sink,a backlight unit,one printed circuit board with micro controller, andLVDS (Low Voltage Differential Signalling) interface,for use in the manufacture of radios for motor vehicles	0 %	p/st	31.12.2025
0.7369	ex85299092	33	LCD modules combined with touch screen facilities:solely consisting of one or more TFT cells,with a diagonal measurement of the screen of 10,7 cm or more but not more than 36 cm,with or without LED backlight,with control electronics for pixel addressing only,without an EPROM memory (Erasable Programmable Read-only Memory),with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface,used solely for installation in motor vehicles of Chapter 87	0 %	—	31.12.2022
0.6654	ex85299092	37	Fastening and covering ledges of aluminium alloy containing:silicon and magnesium,with a length of 300 mm or more but not more than 2200 mm,specifically shaped for use in the manufacture of TV sets	0 %	—	31.12.2025
0.2425	ex85299092	42	Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528	0 %	p/st	31.12.2023
0.3198	ex85299092	43	Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply	0 %	p/st	31.12.2023
0.4030	ex85299092	45	Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats	0 %	p/st	31.12.2023
0.4609	ex85299092	47	Area image sensors ('progressive scan' Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel	0 %	p/st	31.12.2024
0.4616	ex85299092ex85366990	4983	AC socket with a noise filter, composed of:AC socket (for power cord connection) of 230 V,integrated noise filter composed of capacitors and inductors,cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,whether or not equipped with a metal support, which joins the AC socket to the PDP TV set	0 %	p/st	31.12.2024
0.7489	ex85299092	51	OLED modules, consisting of one or more TFT glass or plastic cells:a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm,with a thickness of not more than 55mm,containing organic material,with control electronic for pixel addressing only,with V-by-One Interface and with or without a plug for power supply,with or without back cover,of a kind used in the manufacture of TV sets and monitors	0 %	—	31.12.2023
0.6343	ex85299092	55	OLED modules, consisting of:one or more TFT glass or plastic cells, containing organic material,with or without combined touch screen facilities, andone or more printed circuit boards with control electronics for pixel addressing,for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2024
0.5187	ex85299092	57	Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players	0 %	p/st	31.12.2021
0.6629	ex85299092	63	LCD modulewith a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,with or without a touch screen,with an LED backlight,with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,with a plug for power supply and CAN and LVDS interfaces,with or without electronic components for dynamic adjustments of colour,in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,suitable for installation in motor vehicles of Chapter 87	0 %	p/st	31.12.2025
0.5018	ex85299092	67	Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with or without a touch screen,with backlight, micro-controller,with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,whether or not with haptic and acoustical feedback,for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2025
0.5788	ex85299092	70	Rectangular fastening and covering frame:of an aluminium alloy containing silicon and magnesium,with a length of 500 mm or more but not more than 2200 mm,with a width of 300 mm or more but not more than 1500 mm,of a kind used for the production of TV sets	0 %	p/st	31.12.2022
0.8140	ex85299092	73	CMOS-Image sensorwith a micro lens on every pixel (micro lens coverage at least 99 % of all pixel),to capture infra-red light reflected from objects,in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)	0 %	—	31.12.2025
0.6781	ex85299092	85	Colour LCD module in a housing:with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,without touch screen,with a backlight and micro-controller,with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,without a signal processing module,with control electronics for pixel addressing only,with a motorised mechanism for moving the display screen,for permanent installation in vehicles of Chapter 87	0 %	p/st	31.12.2025
0.4856	ex85359000	30	Semiconductor module switch in a casing:consisting of an IGBT transistor chip and a diode chip on one or more lead frames,for a voltage of 600 V or 1200 V	0 %	p/st	31.12.2020
0.7048	ex85364110	20	Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less	0 %	—	31.12.2021
0.6180	ex85364190	40	Power relay with:electromechanical and/or electromagnetical switching function,a load current of 3 A or more but not more than 16 A,a coil voltage of 5 V or more but not more than 24 V, anda distance between the connector pins of the load circuit not more than 15,6 mm	0 %	p/st	31.12.2024
0.7049	ex85364190	50	Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with one or two photovoltaic generators and two power MOSFET output switches in a casing with connections for a maximum voltage of 60 volts and a minimum current of 2 amps	0 %	—	31.12.2021
0.7052	ex85364900	40	Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts	0 %	—	31.12.2021
0.7796	ex85364900	50	Relay with:a contact current carrying capacity of 5 A or more but not more than 15 A,a nominal voltage of 80 V or more but not more than 270 V, andouter dimensions of 19 mm x 15,2 mm x 15,5 mm,for use in the manufacture of control boards for household appliances	0 %	—	31.12.2024
0.5795	ex85366990	51	SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528	0 %	p/st	31.12.2022
0.6849	ex85366990	60	Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors	0 %	p/st	31.12.2022
0.4614	ex85366990	82	Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:a pulse transformer, including a wide-band ferrite core,a common mode coil,a resistor,a capacitor,for use in the manufacture of products falling within headings 8521 or 8528	0 %	p/st	31.12.2024
0.5028	ex85366990	84	Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528	0 %	p/st	31.12.2025
0.5318	ex85366990	85	Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528	0 %	p/st	31.12.2021
0.5316	ex85366990	86	High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528	0 %	p/st	31.12.2021
0.5181	ex85367000	10	Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528	0 %	p/st	31.12.2021
0.7873	ex85371091	20	Electronic assembly containing:a microprocessor,a programmable memory controller and other electronic components mounted on a printed circuit,with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,for use in the manufacture of products of Subheadings 841821, 841829, 842112, 842211, 845011, 845012, 845019, 845121, 845129 and 851660	0 %	—	31.12.2024
0.8085	ex85371091	45	Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with:a programmable memory,a microprocessor,at least one composite connector,a voltage of 24 V,with a length of 350 mm or more but not more than 400 mm,with a width of 200 mm or more but not more than 250 mm,with a height of 80 mm or more but not more than 120 mm,in a metal housing	0 %	—	31.12.2025
0.6864	ex85371091	50	Fuse control module in a plastic housing with mounting brackets comprising:sockets with or without fuses,connecting ports,a printed circuit board with embedded microprocessor, micro switch and relay,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.7627	ex85371091	57	Programmable memory control board with:4 or more stepper motor drivers,4 or more outputs with MOSFET transistors,a main processor,3 or more inputs for temperature sensors,for a voltage of 10 V or more but not more than 30 V,for use in the manufacture of 3D printers	0 %	—	31.12.2023
0.7609	ex85371091	59	Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:a printed circuit board with programmable memory controller,one single connector, andworking at 12 V	0 %	—	31.12.2023
0.6163	ex85371091ex85371098	6045	Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:an AC power input of 208 V or more but not more than 400 V,a logic power input of 24 V DC,an automatic circuit breaker,a main power switch,internal or external electrical connectors and cables,in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm,of a kind used for manufacturing recycling or sorting machines	0 %	p/st	31.12.2023
0.7610	ex85371091	63	Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:a printed circuit board with programmable memory controller,a metallic housing,one single connector,working at 12 V	0 %	—	31.12.2023
0.7360	ex85371091	65	Electronic control unit for optimal engine performance:with a programmable memory,with a voltage of 8 V or more but not more than 16 V,with at least one composite connector,in a metal housing,whether or not with metal holders,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
0.7660	ex85371091	67	Electronic Engine Control Unit (ECU) with:a printed circuit board (PCB),12 Volts voltage,reprogrammable,a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate),for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
0.7251	ex85371091	70	Programmable motor memory controller for a voltage not exceeding 1000 V, comprising at least:a printed circuit with active and passive components,an aluminium housing, andmultiple connectors	0 %	p/st	31.12.2022
0.6140	ex85371098	30	Motor bridge ICs without programmable memory consisting of:one or more integrated circuits, not interconnected, on separate lead frames,also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars,mounted in a plastic housing	0 %	p/st	31.12.2023
0.6889	ex85371098	35	Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:2 rotary knobs27 or more pushbuttonsLED lights2 integrated circuits for receiving and sending of control signals via the LIN-bus	0 %	p/st	31.12.2025
0.6508	ex85371098	40	Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:a length of 50 mm or more, but not more than 120 mm,a width of 20 mm or more but not more than 40 mm,a height of 30 mm or more, but not more than 120 mm,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.6507	ex85371098	50	Electronic control unit BCM (Body Control Module) comprising:plastic box with printed circuit board and metal holder,with voltage of 9V or more, but not more than 16V,able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.6520	ex85371098	60	Electronic assembly consisting of:a microprocessor,light-emitting diode (LED) or liquid crystal display (LCD) indicators,electronic components mounted on a printed circuit,for use in the manufacture of built-in products of subheadings 85142080, 85165000 and 85166080	0 %	p/st	31.12.2024
0.7194	ex85371098	65	Lever for control module under the steering wheel:with one or more single or multi-positional electrical switches (push-button, rotary or other),whether or not equipped with printed circuit boards and electrical cables,for a voltage of 9 V or more but not more than 16 V,of a kind used in the manufacture of motor vehicles of Chapter 87	0 %	p/st	31.12.2021
0.7171	ex85371098	75	Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:an antenna,a connector,a metal holder,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.8132	ex85371098	80	Propulsion Control System with at least:a DC/AC inverter,a power of 190 kW or more but not more than 220 kW,a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,an integral control of all drive motor and generator traction system functions,a CAN communications interface with System Control Unit,a liquid cooled system,a length of 300 mm or more but not more than 950 mm,a width of 350 mm or more but not more than 600 mm,a height of 200 mm or more but not more than 350 mm,a weight of 40 kg or more but not more than 90 kg	0 %	p/st	31.12.2025
0.8124	ex85371098	88	Control panel for car radio and/or navigation control with:electronic passive components,at least two switches,LEDs,at least one connector,whether or not warning triangle switch,for a voltage not exceeding 16 V,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2025
0.3663	ex85371098	93	Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems	0 %	p/st	31.12.2023
0.6866	ex85389091ex85389099	2050	Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,a connection cable with a plug,at least two mounting brackets,whether or not PCB including integrated circuits, diodes and transistors,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.6397	ex85389099ex85472000	3010	Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint	0 %	p/st	31.12.2024
0.6399	ex85389099	40	Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more	0 %	p/st	31.12.2024
0.7195	ex85389099	60	Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87	0 %	p/st	31.12.2021
0.5953	ex85389099	95	Copper base plate, containing more components than Insulated Gate Bipolar Transistor (IGBT) chips and diodes with a voltage of 650 V or more but not more than 1200 V, for use as a heatsink in the manufacture of IGBT modules	0 %	p/st	31.12.2023
0.2580	ex85402080	91	Photomultiplier	0 %	—	31.12.2021
0.3959	ex85407100	20	Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 85165000	0 %	—	31.12.2023
0.3445	ex85408900	91	Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons	0 %	—	31.12.2023
0.3443	ex85408900	92	Vacuum fluorescent display tube	0 %	—	31.12.2023
0.7409	ex85409100	20	Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having:a graphite carbon shield mounted in a mini-Vogel type system,separate pyrolytic carbon blocks used as heating elements, anda cathode temperature of less than 1800 K at a filament current of 1,26 A	0 %	—	31.12.2022
0.7130	ex85437090	15	Laminated electrochromic film consisting of:two outer layers of polyester,a middle layer of acrylic polymer and silicone, andtwo electric connection terminals	0 %	—	31.12.2021
0.2826	ex85437090	30	Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing	0 %	p/st	31.12.2023
0.7055	ex85437090	33	High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing	0 %	—	31.12.2021
0.7053	ex85437090	34	Gallium nitride (GaN) high-frequency amplifier consisting of one or more discrete transistors, one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing	0 %	—	31.12.2021
0.2822	ex85437090	35	Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing	0 %	p/st	31.12.2023
0.2590	ex85437090	45	Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing	0 %	p/st	31.12.2023
0.3131	ex85437090	55	Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing	0 %	p/st	31.12.2023
0.2820	ex85437090	80	Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing	0 %	p/st	31.12.2023
0.2816	ex85437090	85	Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing	0 %	p/st	31.12.2023
0.4995	ex85437090	95	Mobile telephone view and control module comprising of:a mains power/ CAN (Controller area network) output socket,a universal serial bus (USB) and audio IN/OUT ports andincorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2020
0.4464	ex85442000ex85444290ex85444993	102020	PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of not more than 0,1 mm (±0,01 mm) and a width of not more than 0,8 mm (±0,03 mm),a distance between conductors of not more than 0,5 mm, anda pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm	0 %	—	31.12.2023
0.6709	ex85442000	30	Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:a coaxial cable,two or more connectors, and3 or more plastic clips for attachment to the dashboard,of a kind used in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
0.6194	ex85443000	30	Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following:a travel speed of not more than 24 km/h,a motor speed of not more than 4500 rpm,hydraulic pressure of not more than 25 Mpa,mass of not more than 50 metric tonnes,for use in the manufacture of vehicles of heading 8427	0 %	p/st	31.12.2023
0.7006	ex85443000	35	Wire harness:with an operation voltage of 12V,wrapped in tape or covered in plastic convoluted tubing,with 16 or more strands, with all terminals to be tin plated or equipped with connectors,for use in the manufacture of all-terrain or utility task vehicles	0 %	—	31.12.2021
0.6377	ex85443000ex85444290	4040	Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box	0 %	p/st	31.12.2024
0.7848	ex85443000	45	Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor – BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars	0 %	—	31.12.2024
0.7847	ex85443000	55	Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars	0 %	—	31.12.2024
0.6710	ex85443000ex85444290	6050	Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2025
0.6323	ex85443000	70	Multi-measurement wire harness:of a voltage of 5 V or more but not more than 90 V,capable of transmitting information,for use in the manufacture of vehicles of heading 8711	0 %	p/st	31.12.2024
0.6867	ex85443000	85	Extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2025
0.4980	ex85444290	10	Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (±0,25 V),connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,outer screening shielding,used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits	0 %	p/st	31.12.2023
0.7545	ex85444290	15	PVC isolated flexible eight wire cable with:a length of not more than 2100 mm,an operating voltage of 5 V or more, but not more than 35 V,a temperature resistance of not more than 80 °C,either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end, andat least two stripped and tinned wires on the other end,whether or not with mounted rubber pad with integrated strain relief	0 %	—	31.12.2023
0.7538	ex85444290	25	PVC isolated flexible cable with:a length of not more than 1800 mm,an operating voltage of 5 V or more, but not more than 35 V,a heat resistance of not more than 80 °C,an over-moulded 8 pin MiniFit male connector on one end,either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end,a over-moulded resistor inside the connector, anda moulded strain relief on the cable,whether or not with a over-moulded diode inside a connector	0 %	—	31.12.2023
0.7544	ex85444290	35	PVC isolated flexible six or eight wire cable with:a length of not more than 1300 mm,an operating voltage of 5 V or more, but not more than 35 V,a heat resistance of not more than 80 °C,either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end, andeither an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end	0 %	—	31.12.2023
0.6853	ex85444290	70	Electric conductors:of a voltage of not more than 80 V,with a length of not more than 120 cm,fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors	0 %	p/st	31.12.2025
0.7173	ex85444290	80	12-wire connecting cable containing two connectorsof a voltage of 5 V,with a length of not more than 300 mm,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.2424	ex85444993	10	Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements	0 %	p/st	31.12.2023
0.6861	ex85444993	30	Electric conductors:of a voltage of not more than 80 V,of a platinum-iridium-alloy,coated with poly(tetrafluoroethylene),without connectors,for use in the manufacture of hearing aids, implants and speech processors	0 %	m	31.12.2025
0.5002	ex85459090	40	Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,a thickness of less than 600 μm,a weight of less than 500 g/m2	0 %	m2	31.12.2021
0.5183	ex85481029	10	Spent lithium-ion or nickel metal hydride electric accumulators	0 %	—	31.12.2023
0.3144	ex85489090	41	Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing	0 %	p/st	31.12.2023
0.3193	ex85489090	43	Contact image sensor	0 %	p/st	31.12.2023
0.3763	ex85489090	48	Optical unit, containing at least:a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm,an optical lens,a 'Recording Photodetector Integrated Circuit' (PDIC),a focussing and tracking actuator	0 %	p/st	31.12.2021
0.3965	ex85489090	65	LCD modules:solely consisting of one or more TFT glass or plastic cells,combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit, andwith or without inverters	0 %	p/st	31.12.2023
0.7165	ex87081010ex87081090	1010	Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.6513	ex87083010ex87083091ex87083099	206010	Motor powered brake actuation unit:with a rating of 13,5 V (±0,5V), anda ball screw mechanism to control brake fluid pressure in the master cylinder,for use in the manufacture of electric motor vehicles	0 %	p/st	31.12.2024
0.6590	ex87083010ex87083091	4030	Body of disc type brake in BIR ('Ball in Ramp') or EPB ('Electronic Parking Brake') or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.4999	ex87083010ex87083091	5010	Drum type parking brake:operating within the service brake disk,with a diameter of 170 mm or more but not more than 195 mm,for use in the manufacture of motor vehicles	0 %	p/st	31.12.2021
0.6502	ex87083010ex87083091	6020	Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.6707	ex87083010ex87083091	7040	Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.6869	ex87084020ex87084050	2010	Automatic hydrodynamic gearboxwith a hydraulic torque converter,without transfer box and cardan shaft,whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 87	0 %	p/st	31.12.2025
0.7253	ex87084020	30	Automatic gearbox with a hydraulic torque converter with:at least eight gears,an engine torque of 300 Nm or more, andtransverse or longitudinal installation,for use in the manufacture of motor vehicles of heading 8703	0 %	p/st	31.12.2022
0.7011	ex87084020ex87084050	4030	Gear box assembly with one or two inputs and at least three outputs in cast aluminium housing with overall dimensions (excluding the shafts) of not more than 455 mm (width) x 462 mm (height), 680 mm length, equipped with at least:one exterior-splined output shaft,a rotary switch to indicate gear position,the potential for a differentialfor use in the manufacture of all-terrain or utility task vehicles	0 %	p/st	31.12.2021
0.7383	ex87084020ex87084050	5040	Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:cast aluminium body,differential gear,2 electrical motors and gears,with the dimensions of:a width of 280 mm or more but not more than 470 mm,a height of 350 mm or more but not more than 595 mm,a length of 410 mm or more but not more than 690 mm,for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2022
0.7655	ex87084020ex87084050	6050	Automatic transmission assembly with rotary gear shifter with:aluminium casting housing,differential gear,9 Speed automatic,electronic range select gear selection system,with dimensions of:a width of 330 mm or more but not more than 420 mm,a height of 380 mm or more but not more than 450 mm,a length of 580 mm or more but not more than 690 mm,for use in the manufacture of the vehicles in heading 87	0 %	—	31.12.2023
0.7856	ex87084020ex87084050	7060	Manual gearbox in cast aluminium housing for transverse installation with:a width of not more than 480 mm,a height of not more than 400 mm,a length of not more than 550 mm,five or six gears,a differential gear,an engine torque of 400 Nm or less,for use in the manufacture of motor vehicles of Heading 8703	0 %	—	31.12.2024
0.7987	ex87085020ex87085055	1550	Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened	0 %	—	31.12.2025
0.6648	ex87085020ex87085099	2010	Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middleof a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg	0 %	p/st	31.12.2025
0.7988	ex87085020ex87085099	2545	Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:6 ball tracks or more but not more than 8, witha thread,an external involute spline with 21 or more but not more than 38 teeth,for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,forged, turned, milled and hardened	0 %	—	31.12.2025
0.7989	ex87085020ex87085099	3550	Inboard constant velocity joint tripod housing, with:an outer diameter of 67,0 mm or more but not more than 99,0 mm,3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,an external spline with 21 teeth or more but not more than 41,forged, turned, rolled and hardened	0 %	—	31.12.2025
0.7014	ex87085020ex87085099ex87089910ex87089997	40307080	Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148 mm (± 1 mm) x 213 mm (± 1 mm) x 273 mm (± 1 mm) comprising at least:two electro-magnetic one direction clutches in one cage, working in both directions,an input shaft with outer diameter of 24 mm (± 1 mm), ended with spline of 22,a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 mm, ended with spline of 22 teeth or more but not more than 28 teeth,for use in the manufacture of all-terrain or utility task vehicles	0 %	p/st	31.12.2021
0.7990	ex87085020ex87085099	4555	Outboard constant velocity joint inner race, part of the vehicle’s drive system, with:6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,forged, turned, milled, broached and hardened	0 %	—	31.12.2025
0.7359	ex87085020ex87085055ex87085091ex87085099	50201040	Double flange bearing of 3rd generation, for motor vehicles,with double-row ball bearing,whether or not with impulse (encoder) ring,whether or not with antilock brake system (ABS) sensor,whether or not with mounted screws,for use in the manufacture of goods of chapter 87	0 %	—	31.12.2022
0.7991	ex87085020ex87085099	5560	Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,forged, turned, broached and hardened	0 %	—	31.12.2025
0.7581	ex87085020ex87085099	6015	Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:at least an actuator,whether or not an interior distribution by chain	0 %	—	31.12.2024
0.7692	ex87085020ex87085099	6520	Intermediate steel shaft connecting the gearbox with semi-axle with:a length of 300 mm or more but not more than 650 mm,a spline end on both sides,whether or not with a pressed bearing in the case,whether or not with a holder,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
0.7593	ex87085020ex87085099	7025	Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:an outer diameter of 67,0 mm or more but not more than 84,5 mm,3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,spline with 21 teeth or more but not more than 35,bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves	0 %	—	31.12.2023
0.7640	ex87085020ex87085099	7535	Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, andwith a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees	0 %	—	31.12.2023
0.6711	ex87088020ex87088035	1010	Upper strut insulator containing:a metal holder with three mounting screws, anda rubber bump,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.6705	ex87088020ex87088091	2010	Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
0.6704	ex87088020ex87088091	3020	Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
0.7164	ex87088099	10	Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.7607	ex87088099	20	Aluminium suspension link arm, with dimensions of:a height of 50 mm or more but not more than 150 mm,a width of 10 mm or more but not more than 100 mm,a length of 100 mm or more but not more than 600 mm,a mass of 1000 g or more but not more than 3000 g,equipped with at least two bushed holes made of aluminium alloy with the following characteristics:a tensile strength of 200 MPa or more,a strength of 19 kN or more,a stiffness of 5 kN/mm or more but not more than 9 kN/mm,a frequency of 400 Hz or more but not more than 600 Hz	0 %	p/st	31.12.2023
0.6509	ex87089120ex87089135	2010	Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.6859	ex87089120ex87089199	3030	Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:an insulating area flatness of not more than 0,1 mm,a permissible particle quantity of 0,3 mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4 mm, andnot more than 3 pores larger than 0,2 mm,of a kind used in heat exchangers for car cooling systems	0 %	p/st	31.12.2025
0.7716	ex87089135	20	Turbocharger cooling duct containing:an aluminium alloy duct with at least one metal holder and at least two mounting holes,a rubber pipe with clips,a stainless steel flange highly resistant to corrosion [SUS430JIL],for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2024
0.7231	ex87089199ex87089997	4055	Assembly for supplying compressed air, whether or not with a resonator, comprising at least:one solid aluminium tube whether or not with mounting bracket,one flexible rubber hose, andone metal clip,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2022
0.8127	ex87089997	28	A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,with an operating pressure of not less than 35 MPa,with a durability declared by the manufacturer of not less than 20 years,with a cylinder capacity of 180 liters or more but not more than 375 liters,equipped with a set of solenoid, manual and safety PRD valves,with a total width of 1800 mm or more but not more than 2300 mm,with a total height of 400 mm or more but not more than 500 mm,with a total length of 1200 mm or more but not more than 3600 mm	0 %	—	31.12.2025
0.8128	ex87089997	38	A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,with an operating pressure of not less than 20 MPa,with a shelf life declared by the manufacturer of not less than 20 years,with a cylinder capacity of 315 liters or more but not more than 375 liters,equipped with a set of solenoid, manual and safety PRD valves,with a total width of 2200 mm or more but not more than 2300 mm,with a total height of 450 mm or more but not more than 460 mm,with a total length of 3500 mm or more but not more than 3600 mm	0 %	—	31.12.2025’
0.7665	ex87089299	10	Exhaust system inner liner:with a wall thickness of 0,7 mm or more but not more than 1,3 mm,made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,whether or not with mounting holes,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
0.7664	ex87089299	20	Pipe for guiding exhaust gases from the combustion engine:with a diameter of 40 mm or more but not more than 100 mm,with a length of 90 mm or more but not more than 410 mm,with a wall thickness of 0,7 mm or more but not more than 1,3 mm,of stainless steel,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
0.7696	ex87089299	30	Exhaust system end cover:with a wall thickness of 0,7 mm or more but not more than 1,3 mm,made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,whether or not with inner liner,whether or not with surface treatment,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
0.7008	ex87089310ex87089390	1010	Mechanically operated clutch for use with an elastomeric belt in a dry environment in a CVT (Continuously Variable Transmission) gear case:designed to be bolted onto a splined shaft of outer diameter 23 mm,with an overall diameter of not more than 266 mm (± 1 mm),comprised of 2 sheaves with tapered faces,sheaves having taper of 13 degrees each,having a main compression spring used to resist displacement between sheaves, andcomprised of a cam or spring to maintain proper belt tension,for use in the manufacture of all-terrain vehicles or utility task vehicles	0 %	—	31.12.2021
0.7007	ex87089310ex87089390	3030	Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with:elements that activate the clutch at given rotation and generate (in this way) centrifugal force,shaft ended with 5 or more but not more than 6 degree taper,3 weights, and1 compression spring,for use in the manufacture of all-terrain or utility task vehicles	0 %	p/st	31.12.2021
0.7849	ex87089310ex87089390	4040	Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:cruise control reset,electronic parking brake release,start and stop engine management under Idle Stop and Go system (ISG),for use in the manufacture of passenger vehicles	0 %	—	31.12.2024
0.6526	ex87089420ex87089435	1020	Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.6687	ex87089510ex87089599	1020	Inflatable safety cushion of high strength polyamide fibre:sewn,folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming	0 %	p/st	31.12.2025
0.6688	ex87089510ex87089599	2030	Inflatable safety cushion of high strength polyamide fibre:sewn,folded,with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,suitable for cool inflator technology	0 %	p/st	31.12.2025
0.7009	ex87089910ex87089997	1060	Six-layer composite fuel tank assembly comprising of:a fuel inlet,a pump flange assembly (PFA),a ventilation with rollover valve mounted on the top of the tank, andthreated holes for PFA assembly,for use in the manufacture of all-terrain or utility task vehicles	0 %	—	31.12.2021
0.6583	ex87089910ex87089997	6050	Aluminium engine bracket, with dimensions of:height of more than 10 mm but not more than 200 mm,width of more than 10 mm but not more than 250 mm,length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:internal porosity not more than 1 mm,outer porosity not more than 2 mm,rockwell hardness HRB 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles	0 %	p/st	31.12.2024
0.7921	ex87089997	18	Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of tractors of Subheadings 87019190 and 87019290, whose main function is that of a lawn mower	0 %	p/st	31.12.2023
0.7444	ex87089910ex87089997	2545	Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles	0 %	—	31.12.2023
0.7168	ex87089910ex87089997	3535	Holder of front radiator or intercooler whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.7174	ex87089910ex87089997	4025	Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
0.7282	ex87089997	85	Electroplated interior or exterior parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,layers of copper, nickel and chromiumfor use in the manufacturing of parts for motor vehicles of heading 8701 to 8705	0 %	p/st	31.12.2022
0.6686	ex87141090	10	Motorcycle fork rod inner tubes:of SAE1541 carbon steel,with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,having an elongation at break of 15 %,perforated	0 %	p/st	31.12.2025
0.7003	ex87141090	50	Suspension damper tubes:of 7050-t73 aluminium alloy,anodised on the inner surface,with a mean roughness (Ra) of the inner surface of not more than 0,4, anda maximum roughness height (Rt) of the inner surface of not more than 4,0	0 %	—	31.12.2021
0.6848	ex87141090	70	Motor bikes radiators in consignment of 100 pieces or more	0 %	p/st	31.12.2022
0.6172	ex87149130ex87149130ex87149130	253572	Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)	0 %	—	31.12.2023
0.6879	ex87149610	10	Pedals, for use in the manufacture of bicycles (including electric bicycles)	0 %	—	31.12.2025
0.7421	ex87149910ex87149910	2089	Bicycle handlebars:with or without an integrated stem,either made out of carbon fibres and synthetic resin or made of aluminium,for use in the manufacture of bicycles (including electric bicycles)	0 %	—	31.12.2022
0.7710	ex87149950ex87149950	1191	Derailleur gears, consisting of:rear derailleur and mounting articles,with or without front derailleur,for use in the manufacture of bicycles (including electric bicycles)	0 %	—	31.12.2024
0.6878	ex87149990	30	Seat posts, for use in the manufacture of bicycles (including electric bicycles)	0 %	p/st	31.12.2025
0.7708	ex87149990	40	Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)	0 %	—	31.12.2024
0.3191	ex90011090	10	Image reverser made up from an assembly of optical fibres	0 %	—	31.12.2023
0.5358	ex90011090	30	Polymer optical fibre with:a poly(methyl methacrylate) core,a cladding of fluorinated polymer,a diameter of not more than 3,0 mm, anda length of more than 150 m,of a kind used in the manufacture of polymer fibre cables	0 %	—	31.12.2021
0.7101	ex90011090	40	Fibre optic plates:uncoated and unpainted,of a length of 30 mm or more, but not more than 234,5 mm,of a width of 7 mm or more, but not more than 28 mm, andof a height of 0,5 mm or more, but not more than 3 mm,of a kind used in dental x-ray systems	0 %	—	31.12.2021
0.6402	ex90015041ex90015049	4040	Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses	0 %	—	31.12.2022
0.6401	ex90015080	30	Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses	0 %	—	31.12.2021
0.3139	ex90019000	35	Rear projection screen, comprising a lenticular plastic plate	0 %	p/st	31.12.2023
0.3141	ex90019000	45	Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends	0 %	p/st	31.12.2023
0.4197	ex90019000	55	Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut	0 %	—	31.12.2023
0.4179	ex90019000	70	Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90° and a prism pitch of 50 μm	0 %	—	31.12.2021
0.4883	ex90019000	85	Light guide panel made of poly(methyl methacrylate):whether or not cut,whether or not printed,for use in the manufacture of backlight units for flat screen TVs	0 %	—	31.12.2025
0.6909	ex90021100	15	Infrared lens with motorised focus adjustment:using wavelengths of 3 μm or more but not more than 5 μm,providing a clear picture from 50 m to infinity,with fields of vision sizes of 3° x 2,25° and 9° x 6,75°,with a weight of not more than 230 g,with a length of not more than 88 mm,with a diameter of not more than 46 mm,athermalized,for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes	0 %	—	31.12.2020
0.7590	ex90021100	18	Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:a horizontal field of view range to a maximum of 120 deg,a diagonal field of view range to a maximum of 105 deg,a focal length to a maximum of 7,50 mm,a relative aperture of a maximum of F/2,90,a maximum diameter of 22 mm	0 %	—	31.12.2023
0.5692	ex90021100	20	Lenses:measuring not more than 95 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 3 or more times	0 %	—	31.12.2022
0.7973	ex90021100	23	Lenses with:motorized focus, zoom, aperture,electronically switchable infrared cut filter,an adjustable focal length not less than 2,7 mm and not more than 55 mm,a weight of not more than 100 g,a length of less than 70 mm,a diameter of not more than 60 mm	0 %	—	31.12.2025
0.7102	ex90021100	25	Infrared optical unit composed of:a monocrystalline silicon lens with a diameter of 84 mm (±0,1 mm), anda monocrystalline germanium lens with a diameter of 62 mm (±0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
0.7107	ex90021100	35	Infrared optical unit composed of:a silicon lens with a diameter of 29 mm (±0,05 mm), anda monocrystalline calcium fluoride lens with a diameter of 26 mm (±0,05 mm),assembled on a machined aluminium alloy support, of kind a used for thermal imaging cameras	0 %	—	31.12.2021
0.7103	ex90021100	45	Infrared optical unit:with lenses made of silicon, germanium or chalcogenide glass of a diameter not more than 62 mm (±0,05 mm),whether or not mounted on a machined aluminium alloy support,of a kind used for thermal cameras or IP network cameras	0 %	—	31.12.2021
0.3177	ex90021100	50	Lens unit:having a focal length of 25 mm or more but not more than 150 mm,consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm	0 %	—	31.12.2023
0.7104	ex90021100	55	Infrared optical unit composed of:a germanium lens with a diameter of 11 mm (±0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 14 mm (±0,05 mm), anda silicon lens with a diameter of 17 mm (±0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
0.7105	ex90021100	65	Infrared optical unit:with a silicon lens with a diameter of 26 mm (±0,1 mm),mounted on a machined aluminium alloy support,of a kind used for thermal imaging cameras	0 %	—	31.12.2021
0.7106	ex90021100	75	Infrared optical unit composed of:a germanium lens with a diameter of 19 mm (±0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 18 mm (±0,05 mm),a germanium lens with a diameter of 20,6 mm (±0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
0.6572	ex90021100	85	Lens assembly with:a horizontal field of view range of 20 deg or more, but not more than 200 deg,a focal length of 1,16 mm or more, but not more than 20 mm,a relative aperture of F/1,2 or more, but not more than F/4, anda diameter of 5 mm or more, but not more than 40 mm,for use in the manufacture of CMOS automotive cameras or in IP network cameras production	0 %	—	31.12.2024
0.3140	ex90029000	30	Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates	0 %	p/st	31.12.2023
0.5807	ex90029000	40	Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material	0 %	p/st	31.12.2022
0.5955	ex90258040	30	Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of:a combination of one or more monolithic application-specific integrated circuits (ASIC), andat least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material	0 %	p/st	31.12.2023
0.6288	ex90258040	50	Electronic semiconductor sensor for measuring at least two of the following quantities:atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three‐dimensional structures on the semiconductor material,of a kind used for incorporation into products of Chapters 84-90 and 95	0 %	p/st	31.12.2024
0.6527	ex90292031ex90299000	2030	Clustered instrument panel with a microprocessor control board, with or without stepping motors, LED indicators or LCD display showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.3292	ex90328900	30	Electronic controller of electric power steering (EPS controller)	0 %	p/st	31.12.2023
0.4253	ex90328900	40	Digital valve controller for controlling liquids and gases	0 %	p/st	31.12.2022
0.7004	ex90328900	50	Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising:an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals,four pressure transducers,two or more pressure valves,electric interfaces, andseveral connectors for gas lines,suitable for in-situ plasma bonding processes or for multi frequency bond activating processes	0 %	—	31.12.2021
0.5025	ex94019080	10	Ratchet disk for use in the manufacture of reclining car seats	0 %	p/st	31.12.2025
0.6715	ex94019080	60	Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles	0 %	—	31.12.2020
0.4846	ex95030075ex95030095	1010	Plastic cable car scale models, whether or not with a motor, for printing	0 %	p/st	31.12.2025
0.6950	ex96072010	10	Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers	0 %	—	31.12.2022
0.6949	ex96072090	10	Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers	0 %	—	31.12.2025
0.3286	ex96089100	10	Non-fibrous plastic pen-tips with an internal canal	0 %	—	31.12.2023
0.3289	ex96089100	20	Felt tips and other porous-tips for markers, without internal canal	0 %	—	31.12.2023
0.2737	ex96121010	10	Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye‐sublimation)	0 %	—	31.12.2023

Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011