Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
Modified by
  • Council Regulation (EU) No 722/2014of 24 June 2014amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial productsCorrigendum to Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products(Official Journal of the European Union L 192 of 1 July 2014), 32014R072232014R0722R(01), July 1, 2014
  • Council Regulation (EU) No 1341/2014of 15 December 2014amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32014R1341, December 18, 2014
  • Council Regulation (EU) 2015/982of 23 June 2015amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32015R0982, June 25, 2015
  • Council Regulation (EU) 2015/2449of 14 December 2015amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32015R2449, December 30, 2015
  • Council Regulation (EU) 2016/1051of 24 June 2016amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32016R1051, June 30, 2016
  • Council Regulation (EU) 2016/2390of 19 December 2016amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32016R2390, December 30, 2016
  • Council Regulation (EU) 2017/1134of 20 June 2017amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32017R1134, June 27, 2017
  • Council Regulation (EU) 2017/2467of 21 December 2017amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32017R2467, December 30, 2017
  • Council Regulation (EU) 2018/914of 25 June 2018amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32018R0914, June 27, 2018
  • Council Regulation (EU) 2018/2069of 20 December 2018amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32018R2069, December 28, 2018
  • Council Regulation (EU) 2019/999of 13 June 2019amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32019R0999, June 20, 2019
  • Council Regulation (EU) 2019/2197of 19 December 2019amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial productsCorrigendum to Council Regulation (EU) 2019/2197 of 19 December 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products(Official Journal of the European Union L 335 of 27 December 2019), 32019R219732019R2197R(03), December 27, 2019
  • Council Regulation (EU) 2020/874of 15 June 2020amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32020R0874, June 26, 2020
Corrected by
  • Corrigendum to Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011, 32013R1387R(01), October 9, 2014
  • Corrigendum to Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32014R0722R(01), October 9, 2014
  • Corrigendum to Council Regulation (EU) 2019/2197 of 19 December 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32019R2197R(03), February 25, 2020
Council Regulation (EU) No 1387/2013of 17 December 2013suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
Article 11.The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in the are hereby suspended.2.Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in the Annex.
Article 21.The Commission may at any time review the suspensions for the products listed in the Annex in the following cases:(a)at its own initiative;(b)at the request of Member States.2.The Commission shall review the suspensions for products listed in the Annex during the year preceding the end date for mandatory review provided for in that Annex.
Article 3Where a declaration for release for free circulation is presented for the products in relation to which the supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in "Box 41: Supplementary units" of that declaration using the measurement unit set out in the Annex.
Article 4Regulation (EU) No 1344/2011 is hereby repealed.
Article 5This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 January 2014.
This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX
However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)Only the ad valorem duty is suspended. The specific duty shall continue to apply.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htmA newly introduced measure or a measure with amended conditions. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure.
Serial numberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate foreseen for mandatory review
0.6748ex0709591010Fresh or chilled chanterelles for treatment other than simple repacking for retail sale0 %—31.12.2020
0.3348ex0710210010Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals0 %—31.12.2023
0.3349ex0710809550Bamboo shoots, frozen, not put up for retail sale0 %—31.12.2023
0.2829ex0711590011Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry0 %—31.12.2021
0.2463ex07123200ex07123300ex07123900101031Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale0 %—31.12.2023
0.3347ex0804100030Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries0 %—31.12.2023
0.24110811905008119070Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %—31.12.2023
ex0811909570
0.3228ex0811909520Boysenberries, frozen, not containing added sugar, not put up for retail sale0 %—31.12.2023
0.2409ex0811909530Pineapple (Ananas comosus), in pieces, frozen0 %—31.12.2023
0.2408ex0811909540Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %—31.12.2023
0.2864ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930202020202020Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100,goods of heading 3401, orfatty acids with high purity of heading 29150 %—31.12.2020
0.6789ex1512191010Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of:conjugated linoleic acid of heading 3823, orethyl- or methyl esters of linoleic acid of heading 29160 %—31.12.2020
0.3341ex1515909992Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %—31.12.2023
0.768615162010Hydrogenated castor oil, so called 'opal-wax'0 %—31.12.2023
0.4708ex1516209620Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process0 %—31.12.2024
0.4080ex1517909910Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)0 %—31.12.2021
0.6182ex19019099ex210690983945Preparation in powder form containing by weight:15 % or more but not more than 35 % of wheat derived Maltodextrin,15 % or more but not more than 35 % of whey (milk serum),10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,10 % or more but not more than 30 % of blended, aged spray dried cheese,5 % or more but not more than 15 % of buttermilk, and0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid0 %—31.12.2023
0.2423ex19023010ex190300001020Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale0 %—31.12.2023
0.2866ex2005910010Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg0 %—31.12.2023
0.5884ex20079950ex20079950ex20079993839310Mango puree concentrate, obtained by cooking:of the Genus Mangifera spp.,with a sugar content by weight of not more than 30 %,for use in the manufacture of products of food and drink industry6 %—31.12.2022
0.5875ex20079950ex200799508494Papaya puree concentrate, obtained by cooking:of the Genus Carica spp.,with a sugar content by weight of more than 13 % but not more than 30 %,for use in the manufacture of products of food and drink industry7,8 %—31.12.2022
0.5867ex20079950ex200799508595Guava puree concentrate, obtained by cooking:of the Genus Psidium spp.,with a sugar content by weight of more than 13 % but not more than 30 %,for use in the manufacture of products of food and drink industry6 %—31.12.2022
0.4716ex2008939120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries0 %—31.12.2022
0.5004ex2008994894Mango puree:not from concentrate,of the genus Mangifera,of a Brix value of 14 or more, but not more than 20used in the manufacture of products of drink industry6 %—31.12.2020
0.4709ex20089949ex200899993040Seedless boysenberry puree not containing added spirit, whether or not containing added sugar0 %—31.12.2020
0.5587ex20089949ex200899997011Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:more than 6 % of salt concentration,0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate, andwhether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995,for use in the manufacture of stuffed vine leaves with rice0 %—31.12.2022
0.6723ex2008999120Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking0 %—31.12.2020
0.7767ex2008999935Frozen pulp from acai berries:hydrated and pasteurised,separated from the kernels by the addition of water,with a Brix value of less than 6, andwith a sugar content of less than 5,6 %0 %—31.12.2024
0.4992ex20094192ex200941992070Pineapple juice:not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry8 %—31.12.2020
0.4664ex2009493091Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than EUR 30 per 100 kg net weight,containing added sugar,used in the manufacture of products of food or drink industry0 %—31.12.2024
0.4623ex2009813110Cranberry juice concentrate:of a Brix value of 40 or more but not more than 66,in immediate packings of a content of 50 litres or more0 %l31.12.2024
0.6356ex20098973ex200989731113Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 13,7 or more but not more than 55,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwith added sugar,for the use in the manufacture of products of food or drink industry0 %l31.12.2024
0.4159ex2009897920Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more0 %l31.12.2021
0.6050ex2009897930Frozen acerola juice concentrate:with a Brix value of more than 48 but not more than 67,in immediate packings of a content of 50 litres or more0 %l31.12.2023
0.5206ex2009897985Acai berry juice concentrate:of the species Euterpe oleracea,frozen,not sweetened,not in powder form,of a Brix value of 23 or more but not more than 32,in immediate packings of a content of 10 kg or more0 %—31.12.2021
0.6365ex20098997ex200989972129Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 10 or more but not more than 13,7,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwithout added sugar,for the use in the manufacture of products of food or drink industry0 %l31.12.2024
0.4157ex2009899996Coconut waterunfermented,not containing added spirit or sugar, andin immediate packing of a content of 20 litres or more0 %l31.12.2021
0.6152ex2106102020Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form0 %—31.12.2023
0.3340ex2106102030Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate0 %—31.12.2023
0.5208ex2106909245Preparation containing by weight:more than 30 % but not more than 35 % liquorice extract,more than 65 % but not more than 70 % tricaprylin,standardised by weight to 3 % or more but not more than 4 % glabridin0 %—31.12.2021
0.7284ex2106909250Casein protein hydrolysate consisting of:by weight 20 % or more but not more than 70 % free amino acids, andpeptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da0 %—31.12.2022
0.7435ex2106909847Preparation, having a moisture content of 1 % or more but not more than 4 %, and containing by weight:15 % or more but not more than 35 % of buttermilk,20 % (±10 %) of lactose,20 % (±10 %) of whey protein concentrate,15 % (±10 %) of cheddar cheese,3 % (±2 %) of salt,0,1 % or more but not more than 10 % of lactic acid E270,0,1 % or more but not more than 10 % of gum arabic E414,for use in the manufacture of products of food and drink industry0 %—31.12.2022
0.5246ex2519901010Fused magnesia with a purity by weight of 94 % or more0 %—31.12.2021
0.6330ex27075000ex270799802010Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %0 %—31.12.2024
0.6168ex2707999910Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 270 %—31.12.2023
0.7823ex27101981ex271019993050Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,and with:a viscosity index of 80 or more, but less than 120, anda kinematic viscosity less than 5,0 cSt at 100 °C or more than 13,0 cSt at 100 °C0 %—31.12.2023
0.7822ex27101981ex271019994060Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,with a viscosity index of 120 or more0 %—31.12.2024
0.6495ex2710199920Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:not more than 1 mg/kg of sulphur,more than 99 % by weight of saturated hydrocarbons,more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50, anda kinematic viscosity at 40 °C of more than 6,5 mm2/s, ora kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more0 %—31.12.2024
0.7393ex2712909910Blend of 1-alkenes (alpha-olefins) (CAS RN 131459-42-2) containing by weight 80 % or more of 1-alkenes of a chain length of 24 carbon atoms or more but not exceeding 64 carbon atoms containing by weight more than 72 % 1-alkenes with more than 28 carbon atoms0 %—31.12.2022
0.4531ex2804509040Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis0 %—31.12.2023
0.603628047000Phosphorus0 %—31.12.2023
0.6658ex2805120010Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)0 %—31.12.2020
0.5609ex2805199020Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more0 %—31.12.2022
0.2559ex2805301010Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium0 %—31.12.2023
0.4979280530202805303028053040Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more0 %—31.12.2020
0.7769ex2809200010Aqueous solution of phosphoric acid (CAS RN 7664-38-2), containing by weight 85 % or more phosphoric acid0 %—31.12.2024
0.3338ex2811198010Sulphamidic acid (CAS RN 5329-14-6)0 %—31.12.2023
0.5418ex2811198020Hydrogen iodide (CAS RN 10034-85-2)0 %—31.12.2021
0.2407ex2811220010Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %—31.12.2023
0.6836ex2811220015Amorphous silicon dioxide (CAS RN 60676-86-0):in the form of powder,of a purity by weight of 99,0 % or more,with a median grain size of 0,7 μm or more, but not more than 2,1 μm,where 70 % of the particles have a diameter of not more than 3 μm0 %—31.12.2020
0.7292ex2811299010Tellurium dioxide (CAS RN 7446-07-3)0 %—31.12.2022
0.3308ex2812900010Nitrogen trifluoride (CAS RN 7783-54-2)0 %—31.12.2023
0.5747ex2816400010Barium hydroxide (CAS RN 17194-00-2)0 %—31.12.2022
0.7594ex2818101110Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,00 %—31.12.2023
0.5110ex2818109120Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:94 % or more, but less than 98,5 % of aluminium oxide,2 % (±1,5 %) of magnesium oxide,1 % (±0,6 %) of yttrium oxide,andeither 2 % (±1,2 %) of lanthanum oxide, or2 % (±1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm0 %—31.12.2020
0.4640ex2818200010Activated alumina with a specific surface area of at least 350 m2/g0 %—31.12.2024
0.6837ex2818300020Aluminium hydroxide (CAS RN 21645-51-2):in the form of powder,with a purity by weight of 99,5 % or more,with a decomposition point of 263°C or more,with a particle size of 4 μm (± 1 μm),with a Total-Na2O-content by weight of not more than 0,06 %0 %—31.12.2020
0.3306ex2818300030Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)0 %—31.12.2023
0.5369ex2819909010Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy0 %—31.12.2021
0.5752ex2823000010Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 0,7 μm or more but not more than 2,1 μm0 %—31.12.2022
0.5576ex2825100010Hydroxylammonium chloride (CAS RN 5470-11-1)0 %—31.12.2022
0.7897ex2825200010Lithium hydroxide monohydrate (CAS RN 1310-66-3)2,6 %—31.12.2020
0.380028253000Vanadium oxides and hydroxides0 %—31.12.2021
0.3303ex2825500020Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride0 %—31.12.2023
0.6819ex2825500030Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm0 %—31.12.2020
0.5555ex2825600010Zirconium dioxide (CAS RN 1314-23-4)0 %—31.12.2022
0.6980ex2825700010Molybdenum trioxide (CAS RN 1313-27-5)0 %—31.12.2021
0.7193ex2825700020Molybdic Acid (CAS RN 7782-91-4)0 %—31.12.2021
0.5055ex2826199010Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more0 %—31.12.2020
0.5498ex2826908010Lithium hexafluorophosphate (1-) (CAS RN 21324-40-3)2,7 %—31.12.2020
0.2865ex2827398510Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %0 %—31.12.2023
0.4180ex2827398520Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more0 %—31.12.2021
0.6143ex2827398540Barium chloride dihydrate (CAS RN 10326-27-9)0 %—31.12.2023
0.4423ex2827499010Hydrated zirconium dichloride oxide (CAS RN 7699-43-6)0 %—31.12.2023
0.6463ex2827600010Sodium iodide (CAS RN 7681-82-5)0 %—31.12.2024
0.7596ex2828100010Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more0 %—31.12.2023
0.3302ex2830100010Disodium tetrasulphide (CAS RN 12034-39-8), containing by weight 38 % or less of sodium calculated on the dry weight0 %—31.12.2023
0.3859ex2833298020Manganese sulphate monohydrate (CAS RN 10034-96-5)0 %—31.12.2023
0.5090ex2833298030Zirconium sulphate (CAS RN 14644-61-2)0 %—31.12.2020
0.4338ex2835100010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %—31.12.2022
0.6144ex2835100020Sodium hypophosphite (CAS RN 7681-53-0)0 %—31.12.2023
0.7452ex2835100030Aluminium Phosphinate (CAS RN 7784-22-7)0 %—31.12.2023
0.2524ex2836910020Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:2 mg/kg or more of arsenic,200 mg/kg or more of calcium,200 mg/kg or more of chlorides,20 mg/kg or more of iron,150 mg/kg or more of magnesium,20 mg/kg or more of heavy metals,300 mg/kg or more of potassium,300 mg/kg or more of sodium,200 mg/kg or more of sulphates,determined according to the methods specified in the European Pharmacopœia0 %—31.12.2023
0.2863ex2836991730Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356‐18-6) with a purity by weight of 96 % or more0 %—31.12.2023
0.3300ex2837190020Copper cyanide (CAS RN 544-92-3)0 %—31.12.2023
0.4078ex2837200010Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)0 %—31.12.2021
0.4339ex2839190010Disodium disilicate (CAS RN 13870-28-5)0 %—31.12.2022
0.2861ex2839900020Calcium silicate (CAS RN 1344-95-2)0 %—31.12.2023
0.6632ex2840209010Zinc borate (CAS RN 12767-90-7)0 %—31.12.2020
0.7288ex2841500011Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more2 %—31.12.2021
0.6142ex2841700010Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)0 %—31.12.2023
0.6482ex2841700030Hexaammonium heptamolybdate, anhydrous (CAS RN 12027‐67-7) or as tetrahydrate (CAS RN 12054-85-2)0 %—31.12.2024
0.6981ex2841700040Diammonium dimolybdate (CAS RN 27546-07-2)0 %—31.12.2021
0.4323ex2841800010Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)0 %—31.12.2022
0.7301ex2841903010Potassium metavanadate (CAS RN 13769-43-2)0 %—31.12.2022
0.4222ex2841908510Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %2,7 %—31.12.2020
0.5936ex2841908520Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more0 %—31.12.2023
0.4416ex2842100010Synthetic beta zeolite powder0 %—31.12.2023
0.4588ex2842100020Synthetic chabasite zeolite powder0 %—31.12.2024
0.7097ex2842100040Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations0 %—31.12.2021
0.7397ex2842100050Fluorphlogopite (CAS RN 12003-38-2)0 %—31.12.2022
0.4642ex2842901010Sodium selenate (CAS RN 13410-01-0)0 %—31.12.2024
0.7400ex2842908030Aluminium trititanium dodecachloride (CAS RN 12003-13-3)0 %—31.12.2022
0.329528451000Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)0 %—31.12.2023
0.329728459010Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0 %—31.12.2023
0.4189ex2845909010Helium-3 (CAS RN 14762-55-1)0 %—31.12.2021
0.4191ex2845909020Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)0 %—31.12.2023
0.4190ex2845909030(13C)Carbon monoxide (CAS RN 1641-69-6)0 %—31.12.2021
0.2859ex28461000ex382499961053Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight0 %—31.12.2023
0.3296ex2846100020Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated0 %—31.12.2023
0.3420ex2846100030Cerium lanthanum carbonate, whether or not hydrated0 %—31.12.2023
0.322728469010284690202846903028469090Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 284610000 %—31.12.2023
0.3418ex2850002010Silane (CAS RN 7803-62-5)0 %—31.12.2023
0.3419ex2850002080Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more0 %—31.12.2024
0.4332ex2850002030Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm0 %—31.12.2022
0.5497ex2850002040Germanium tetrahydride (CAS RN 7782-65-2)0 %—31.12.2021
0.7302ex2850002060Disilane (CAS RN 1590-87-0)0 %—31.12.2022
0.7555ex2850002070Cubic Boron nitride (CAS RN 10043-11-5)0 %—31.12.2023
0.4492ex2850006010Sodium azide (CAS RN 26628-22-8)0 %—31.12.2023
0.3421ex2853909020Phosphine (CAS RN 7803-51-2)0 %—31.12.2023
0.7289ex29033919205-Bromopent-1-ene (CAS RN 1119-51-3)0 %—31.12.2022
0.663329033921Difluoromethane (CAS RN 75-10-5)0 %—31.12.2020
0.6007ex2903392410Pentafluoroethane (CAS RN 354-33-6)0 %—31.12.2024
0.3674ex29033926101,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification:not more than 600 ppm by weight of R134 (1,1,2,2‐tetrafluoroethane),not more than 5 ppm by weight of R143a (1,1,1‐trifluoroethane),not more than 2 ppm by weight of R125 (pentafluoroethane),not more than 100 ppm by weight of R124 (1‐chloro‐1,2,2,2-tetrafluoroethane),not more than 30 ppm by weight of R114 (1,2‐dichlorotetrafluoroethane),not more than 50 ppm by weight of R114a (1,1‐Dichlorotetrafluoroethane),not more than 250 ppm by weight of R133a (1‐Chloro‐2,2,2-Trifluoroethane),not more than 2 ppm by weight of R22 (Chlorodifluoromethane),not more than 2 ppm by weight of R115 (Chloropentafluoroethane),not more than 2 ppm by weight of R12 (Dichlorodifluoromethane),not more than 20 ppm by weight of R40 (Methyl chloride),not more than 20 ppm by weight of R245cb (1,1,1,2,2‐pentafluoropropane),not more than 20 ppm by weight of R12B1 (Chlorodifluorobromomethane),not more than 20 ppm by weight of R32 (Difluoromethane),not more than 15 ppm by weight of R31 (Chlorofluoromethane),not more than 10 ppm by weight of R152a (1,1‐Difluoroethane),not more than 20 ppm by weight of 1131 (1‐Chloro‐2‐Fluoroethylene),not more than 20 ppm by weight of 1122 (1‐Chloro‐2,2‐Difluoroethylene),not more than 3 ppm by weight of 1234yf (2,3,3,3‐Tetrafluoropropene),not more than 3 ppm by weight of 1243zf (3,3,3 Trifluoropropene),not more than 3 ppm by weight of 1122a (1‐chloro‐1,2‐difluoroethylene),not more than 4,5 ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene),not more than 3 ppm by weight of any individual unspecified/unknown chemical,not more than 10 ppm by weight of all unspecified/unknown chemicals combined,not more than 10 ppm by weight of Water,with an acidity level of not more than 0,1 ppm by weight,without Halides,not more than 0,01 % by volume of High Boilers,without any odour (no malodour),for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2)0 %—31.12.2024
0.2542ex29033927101,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)0 %—31.12.2023
0.2854ex2903392810Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)0 %—31.12.2023
0.2852ex2903392820Perfluoroethane (CAS RN 76-16-4)0 %—31.12.2023
0.6077ex29033929101H-Perfluorohexane (CAS RN 355-37-3)0 %—31.12.2023
0.5803290339312,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)0 %—31.12.2022
0.4517ex2903393520Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)0 %—31.12.2023
0.5472ex2903393910Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)0 %—31.12.2021
0.6076ex2903393920(Perfluorobutyl) ethylene (CAS RN 19430-93-4)0 %—31.12.2023
0.4066ex2903393930Hexafluoropropene (CAS RN 116-15-4)0 %—31.12.2021
0.7324ex29033939401,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2)0 %—31.12.2022
0.7895ex2903720010Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more0 %—31.12.2024
0.6610ex29037400102-Chloro-1,1-difluoroethane (CAS RN 338-65-8)0 %—31.12.2020
0.3675ex29037760101,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)0 %—31.12.2023
0.5212ex2903779010Chlorotrifluoroethylene (CAS RN 79-38-9)0 %—31.12.2021
0.7513ex2903780010Octafluoro-1,4-diiodobutane (CAS RN 375-50-8)0 %—31.12.2023
0.7755ex2903780020Trifluoroiodomethane (CAS RN 2314-97-8)0 %—31.12.2024
0.6485ex2903793010Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)0 %—31.12.2024
0.7826ex29037930301-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more0 %—31.12.2024
0.2583ex29038980451,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more2 %—31.12.2021
0.5504ex2903898040Hexabromocyclododecane0 %—30.06.2020
0.5765ex2903898050Chlorocyclopentane (CAS RN 930-28-9)0 %—31.12.2022
0.7304ex2903898060Octafluorocyclobutane (CAS RN 115-25-3)0 %—31.12.2022
0.6611ex29039980154-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)0 %—31.12.2020
0.3410ex29039980201,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)0 %—31.12.2023
0.3411ex29039980402,6-Dichlorotoluene (CAS RN 118-69-4), of a purity by weight of 99 % or more and containing:0,001 mg/kg or less of tetrachlorodibenzodioxines,0,001 mg/kg or less of tetrachlorodibenzofurans,0,2 mg/kg or less of tetrachlorobiphenyls0 %—31.12.2023
0.4529ex2903998050Fluorobenzene (CAS RN 462-06-6)0 %—31.12.2023
0.7351ex29039980601,1'-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1)0 %—31.12.2022
0.6235ex29039980753-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)0 %—31.12.2024
0.5917ex29039980801-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)0 %—31.12.2023
0.3407ex2904100030Sodium p-styrenesulphonate (CAS RN 2695-37-6)0 %—31.12.2024
0.4686ex2904100050Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)0 %—31.12.2024
0.3409ex2904200010Nitromethane (CAS RN 75-52-5)0 %—31.12.2020
0.3391ex2904200020Nitroethane (CAS RN 79-24-3)0 %—31.12.2020
0.3408ex29042000301-Nitropropane (CAS RN 108-03-2)0 %—31.12.2020
0.3390ex29042000402-Nitropropane (CAS RN 79-46-9)0 %—31.12.2024
0.2972ex2904910010Trichloronitromethane (CAS RN 76-06-2), for the manufacture of goods of subheading 3808920 %—30.06.2020
0.2526ex29049900201-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)0 %—31.12.2024
0.6612ex2904990025Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)0 %—31.12.2020
0.3388ex2904990030Tosyl chloride (CAS RN 98-59-9)0 %—31.12.2024
0.6613ex29049900351-Fluoro-4-nitrobenzene (CAS RN 350-46-9)0 %—31.12.2020
0.5745ex29049900404-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)0 %—31.12.2022
0.7507ex29049900452-Nitrobenzenesulfonyl Chloride (CAS RN 1694-92-4)0 %—31.12.2023
0.6001ex2904990050Ethanesulphonyl chloride (CAS RN 594-44-5)0 %—31.12.2023
0.6407ex29049900604,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7)0 %—31.12.2024
0.6270ex29049900701-Chloro-4-nitrobenzene (CAS RN 100-00-5)0 %—31.12.2024
0.6560ex29049900801-Chloro-2-nitrobenzene (CAS RN 88-73-3)0 %—31.12.2024
0.6186ex2905110010Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more0 %—31.12.2023
0.7069ex29051100ex290519002035Methyl methanesulphonate (CAS RN 66-27-3)0 %—31.12.2021
0.2967ex2905190011Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN0 %—31.12.2023
0.6118ex2905190020Butyltitanate monohydrate, homopolymer (CAS RN 162303‐51‐7)0 %—31.12.2023
0.6119ex2905190025Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)0 %—31.12.2023
0.3384ex29051900302,6-Dimethylheptan-4-ol (CAS RN 108-82-7)0 %—31.12.2023
0.4793ex29051900402,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)0 %—31.12.2024
0.5534ex2905190070Titanium tetrabutanolate (CAS RN 5593-70-4)0 %—31.12.2022
0.5533ex2905190080Titanium tetraisopropoxide (CAS RN 546-68-9)0 %—31.12.2022
0.6002ex2905190085Titanium tetraethanolate (CAS RN 3087-36-3)0 %—31.12.2023
0.6464ex2905220010Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)0 %—31.12.2024
0.7114ex29052200203,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)0 %—31.12.2021
0.7388ex2905299010Cis-hex-3-en-1-ol (CAS RN 928-96-1)0 %—31.12.2022
0.7674ex2905320010(2S)-propane-1,2-diol (CAS RN 4254-15-3)0 %—31.12.2023
0.4934ex2905399510Propane-1,3-diol (CAS RN 504-63-2)0 %—31.12.2020
0.5249ex2905399520Butane-1,2-diol (CAS RN 584-03-2)0 %—31.12.2022
0.5255ex29053995302,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)0 %—31.12.2021
0.5847ex2905399540Decane-1,10-diol (CAS RN 112-47-0)0 %—31.12.2022
0.5908ex29053995502-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)0 %—31.12.2023
0.7701ex2905399560Dodecane-1,12-diol (CAS RN 5675-51-4)0 %—31.12.2024
0.7914ex29053995702-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more0 %—31.12.2024
0.6724ex2905490010Ethylidynetrimethanol (CAS RN 77-85-0)0 %—31.12.2020
0.4624ex29055998202,2,2-Trifluoroethanol (CAS RN 75-89-8)0 %—31.12.2024
0.3378ex2906190010Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)0 %—31.12.2023
0.3380ex29061900204,4'-Isopropylidenedicyclohexanol (CAS RN 80-04-6)0 %—31.12.2023
0.6257ex29061900504-tert-Butylcyclohexanol (CAS RN 98-52-2)0 %—31.12.2024
0.3681ex29062900201-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)0 %—31.12.2023
0.5855ex29062900302-Phenylethanol (CAS RN 60-12-8)0 %—31.12.2022
0.6757ex29062900402-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)0 %—31.12.2020
0.7373ex29062900502,2'-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5)0 %—31.12.2022
0.7806ex29062900603-[3-(Trifluoromethyl)phenyl]propan-1-ol (CAS RN 78573‐45‐2)0 %—31.12.2024
0.6329ex2907120020Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more0 %—31.12.2024
0.6559ex2907120030p-Cresol (CAS RN 106-44-5)0 %—31.12.2024
0.5216ex29071590102-Naphthol (CAS RN 135-19-3)0 %—31.12.2021
0.6256ex29071910102,6-Xylenol (CAS RN 576-26-1)0 %—31.12.2024
0.4480ex2907199020Biphenyl-4-ol (CAS RN 92-69-3)0 %—31.12.2023
0.7753ex29071990302-methyl-5-(propan-2-yl)phenol (CAS RN 499-75-2)0 %—31.12.2024
0.3372ex2907210010Resorcinol (CAS RN 108-46-3)0 %—31.12.2023
0.6026ex29072900156,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9)0 %—31.12.2023
0.3369ex29072900204,4'-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)0 %—31.12.2023
0.6454ex29072900254-Hydroxybenzyl alcohol (CAS RN 623-05-2)0 %—31.12.2024
0.3367ex29072900304,4',4"-Ethylidynetriphenol (CAS RN 27955-94-8)0 %—31.12.2023
0.5432ex29072900452-Methylhydroquinone (CAS RN 95-71-6)0 %—31.12.2021
0.3368ex29072900506,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)0 %—31.12.2023
0.6558ex29072900652,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)0 %—31.12.2024
0.2584ex29072900702,2',2",6,6',6"-Hexa-tert-butyl-α,α',α"-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)0 %—31.12.2023
0.7402ex2907290075Biphenyl-4,4'-diol (CAS RN 92-88-6)0 %—31.12.2023
0.3848ex2907290085Phloroglucinol whether or not hydrated0 %—31.12.2023
0.5903ex2908190010Pentafluorophenol (CAS RN 771-61-9)0 %—31.12.2023
0.5914ex29081900204,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)0 %—31.12.2023
0.6260ex29081900304-Chlorophenol (CAS RN 106-48-9)0 %—31.12.2024
0.6782ex29081900403,4,5-Trifluorophenol (CAS RN 99627-05-1)0 %—31.12.2020
0.6915ex29081900504-Fluorophenol (CAS RN 371-41-5)0 %—31.12.2020
0.7720ex29081900602,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol (CAS RN 79‐94-7)0 %—31.12.2024
0.3361ex2909199020Bis(2-chloroethyl) ether (CAS RN 111-44-4)0 %—31.12.2023
0.3359ex2909199030Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more0 %—31.12.2023
0.4035ex29091990503-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)0 %—31.12.2021
0.5407ex29092000108-Methoxycedrane (CAS RN 19870-74-7)0 %—31.12.2021
0.5503ex29093038201,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)0 %—31.12.2021
0.6649ex29093038301,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)0 %—31.12.2020
0.7454ex29093038404-Benzyloxybromobenzene (CAS RN 6793-92-6)0 %—31.12.2023
0.7828ex29093038502-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more0 %—31.12.2024
0.4710ex29093090102-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)0 %—31.12.2024
0.7176ex2909309015{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)0 %—31.12.2021
0.4711ex29093090201,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)0 %—31.12.2024
0.7115ex29093090251,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane0 %—31.12.2021
0.5117ex29093090303,4,5-Trimethoxytoluene (CAS RN 6443-69-2)0 %—31.12.2020
0.7580ex29093090351-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738‐29-9)0 %—31.12.2023
0.6614ex29093090401-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)0 %—31.12.2020
0.6783ex29093090501-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)0 %—31.12.2020
0.6784ex29093090601-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)0 %—31.12.2020
0.6994ex2909309070O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)0 %—31.12.2021
0.7079ex2909309080Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more0 %—31.12.2021
0.7706ex29094400102-Propoxyethanol (CAS RN 2807-30-9)0 %—31.12.2024
0.6927ex29094980101-Propoxypropan-2-ol (CAS RN 1569-01-3)0 %—31.12.2020
0.3484ex29095000104-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)0 %—31.12.2023
0.4911ex2909500020Ubiquinol (CAS RN 992-78-9)0 %—31.12.2020
0.7846ex29095000402-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more0 %—31.12.2024
0.3682ex2909600010Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)0 %—31.12.2023
0.6489ex29096000303,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons0 %—31.12.2024
0.7910ex2909600050Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes0 %—31.12.2024
0.7744ex29109000102-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)0 %—31.12.2024
0.5940ex29109000151,2-Epoxycyclohexane (CAS RN 286-20-4)0 %—31.12.2023
0.7672ex2910900025Phenyloxirane (CAS RN 96-09-3)0 %—31.12.2023
0.2649ex29109000302,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)0 %—31.12.2023
0.6660ex29109000502,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)0 %—31.12.2020
0.4361ex2910900080Allyl glycidyl ether (CAS RN 106-92-3)0 %—31.12.2021
0.6785ex2911000010Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2)0 %—31.12.2020
0.7116ex2912190010Undecanal (CAS RN 112-44-7)0 %—31.12.2021
0.6968ex29122900152,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)0 %—31.12.2021
0.6967ex2912290025Mixture of isomers consisting of:85 (± 10) % by weight of 4-isobutyl-2-methylbenzaldehyde (CAS RN 73206-60-7),15 (± 10) % by weight of 2-isobutyl-4-methyllbenzaldehyde (CAS RN 68102-28-3)0 %—31.12.2021
0.7314ex2912290035Cinnamaldehyde (CAS RN 104-55-2)0 %—31.12.2022
0.7405ex2912290045p-Phenylbenzaldehyde (CAS RN 3218-36-8)0 %—31.12.2022
0.5755ex29122900504-Isobutylbenzaldehyde (CAS RN 40150-98-9)0 %—31.12.2023
0.7612ex2912290055Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5)0 %—31.12.2023
0.6072ex29122900704-tert-Butylbenzaldehyde (CAS RN 939-97-9)0 %—31.12.2023
0.6073ex29122900804-Isopropylbenzaldehyde (CAS RN 122-03-2)0 %—31.12.2023
0.3479ex29124900103-Phenoxybenzaldehyde (CAS RN 39515-51-0)0 %—31.12.2023
0.5732ex29124900204-Hydroxybenzaldehyde (CAS RN 123-08-0)0 %—31.12.2022
0.5135ex2912490030Salicylaldehyde (CAS RN 90-02-8)0 %—31.12.2020
0.6678ex29124900403-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)0 %—31.12.2020
0.7353ex29124900502,6-dihydroxybenzaldehyde (CAS RN 387-46-2)0 %—31.12.2022
0.7712ex29130000102-Nitrobenzaldehyde (CAS RN 552-89-6)0 %—31.12.2024
0.4228ex2914199020Heptan-2-one (CAS RN 110-43-0)0 %—31.12.2022
0.4274ex29141990303-Methylbutanone (CAS RN 563-80-4)0 %—31.12.2022
0.4275ex2914199040Pentan-2-one (CAS RN 107-87-9)0 %—31.12.2022
0.7554ex2914199060Zinc acetylacetonate (CAS RN 14024-63-6)0 %—31.12.2023
0.7568ex2914290015oestr-5(10)-ene-3,17-dione (CAS RN 3962-66-1)0 %—31.12.2023
0.3475ex2914290020Cyclohexadec-8-enone (CAS RN 3100-36–5)0 %—31.12.2023
0.7450ex2914290025Cyclohex-2-enone (CAS RN 930-68-7)0 %—31.12.2023
0.4933ex2914290030(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)0 %—31.12.2020
0.3480ex2914290040Camphor0 %—31.12.2023
0.5389ex2914290050trans-β-Damascone (CAS RN 23726-91-2)0 %—31.12.2021
0.7422ex29142900702-sec-butylcyclohexanone (CAS RN 14765-30-1)0 %—31.12.2022
0.7389ex29142900801-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9)0 %—31.12.2022
0.6265ex29143900152,6-Dimethyl-1-indanone (CAS RN 66309-83-9)0 %—31.12.2024
0.6447ex29143900251,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)0 %—31.12.2024
0.4227ex2914390030Benzophenone (CAS RN 119-61-9)0 %—31.12.2022
0.4429ex29143900504-Phenylbenzophenone (CAS RN 2128-93-0)0 %—31.12.2023
0.4428ex29143900604-Methylbenzophenone (CAS RN 134-84-9)0 %—31.12.2023
0.5739ex2914390070Benzil (CAS RN 134-81-6)0 %—31.12.2022
0.5535ex29143900804'-Methylacetophenone (CAS RN 122-00-9)0 %—31.12.2022
0.7824ex29145000151,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more0 %—31.12.2024
0.4932ex29145000203'-Hydroxyacetophenone (CAS RN 121-71-1)0 %—31.12.2020
0.5943ex29145000254'-Methoxyacetophenone (CAS RN 100-06-1)0 %—31.12.2023
0.7797ex29145000352-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1-one (CAS-RN 71868-15-0)0 %—31.12.2024
0.5904ex29145000362,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)0 %—31.12.2023
0.5435ex29145000404-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)0 %—31.12.2021
0.5809ex29145000453,4-Dihydroxybenzophenone (CAS RN 10425-11-3)0 %—31.12.2022
0.4235ex29145000602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %—31.12.2022
0.6591ex29145000653-Methoxyacetophenone (CAS RN 586-37-8)0 %—31.12.2020
0.6762ex29145000757-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009‐38-7)0 %—31.12.2020
0.4385ex29145000802',6'-Dihydroxyacetophenone (CAS RN 699-83-2)0 %—31.12.2023
0.7075ex29145000854,4'-Dihydroxybenzophenone (CAS RN 611-99-4)0 %—31.12.2021
0.2647ex29146980102-Ethylanthraquinone (CAS RN 84-51-5)0 %—31.12.2023
0.2643ex29146980301,4-Dihydroxyanthraquinone (CAS RN 81-64-1)0 %—31.12.2023
0.5430ex2914698040p-Benzoquinone (CAS RN 106-51-4)0 %—31.12.2021
0.6481ex2914698050Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)0 %—31.12.2024
0.6592ex29147900151-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5)0 %—31.12.2020
0.7736ex29147900182-Chloro-1-cyclopropylethanone (CAS RN 7379-14-8)0 %—31.12.2024
0.5782ex29147900202,4'-Difluorobenzophenone (CAS RN 342-25-6)0 %—31.12.2022
0.7732ex29147900235-Chloro-2-hydroxybenzophenone (CAS RN 85-19-8)0 %—31.12.2024
0.6596ex29147900251-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5)0 %—31.12.2020
0.7751ex2914790027(2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone (CAS RN 915095-86-2)0 %—31.12.2024
0.7467ex29147900305-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7)0 %—31.12.2023
0.7442ex29147900351-[4-(benzyloxy)phenyl]-2-bromopropan-1-one (CAS RN 35081-45-9)0 %—31.12.2023
0.3474ex2914790040Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)0 %—31.12.2023
0.2640ex29147900503'-Chloropropiophenone (CAS RN 34841-35-5)0 %—31.12.2023
0.4948ex29147900604'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)0 %—31.12.2020
0.7072ex29147900651,4-bis(4-Fluorobenzoyl) Benzene (CAS RN 68418-51-9)0 %—31.12.2021
0.5237ex29147900704-Chloro-4'-hydroxybenzophenone (CAS RN 42019-78-3)0 %—31.12.2021
0.7082ex29147900754,4'-Difluorobenzophenone (CAS RN 345-92-6)0 %—31.12.2021
0.6120ex2914790080Tetrachloro-p-benzoquinone (CAS RN 118-75-2)0 %—31.12.2023
0.7214ex2915120010Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)0 %—31.12.2021
0.7433ex2915390010Cis-3-hexenyl acetate (CAS RN 3681-71-8)0 %—31.12.2022
0.6155ex29153900252-Methylcyclohexyl acetate (CAS RN 5726-19-2)0 %—31.12.2023
0.7423ex29153900304-tert-butylcyclohexyl acetate (CAS RN 32210-23-4)0 %—31.12.2022
0.2957ex2915390040tert-Butyl acetate (CAS RN 540-88-5)0 %—31.12.2023
0.5119ex2915390060Dodec-8-enyl acetate (CAS RN 28079-04-1)0 %—31.12.2020
0.5121ex2915390065Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)0 %—31.12.2020
0.5120ex2915390070Dodec-9-enyl acetate (CAS RN 16974-11-1)0 %—31.12.2020
0.5289ex2915390075Isobornyl acetate (CAS RN 125-12-2)0 %—31.12.2021
0.5301ex29153900801-Phenylethyl acetate (CAS RN 93-92-5)0 %—31.12.2021
0.5909ex29153900852-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)0 %—31.12.2023
0.7834ex2915400010Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more0 %—31.12.2024
0.7830ex2915400020Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more0 %—31.12.2024
0.5858ex2915601910Ethyl butyrate (CAS RN 105-54-4)0 %—31.12.2022
0.7540ex2915704010Methyl palmitate (CAS RN 112-39-0)0 %—31.12.2023
0.7541ex2915903010Methyl laurate (CAS RN 111-82-0)0 %—31.12.2020
0.7899ex2915907018Myristitic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more0 %—31.12.2024
0.7407ex2915907020Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)0 %—31.12.2022
0.7542ex2915907025Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)0 %—31.12.2023
0.5767ex29159070303,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)0 %—31.12.2022
0.5536ex29159070352,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9)0 %—31.12.2023
0.6255ex2915907045Trimethyl orthoformate (CAS RN 149-73-5)0 %—31.12.2024
0.4791ex2915907050Allyl heptanoate (CAS RN 142-19-8)0 %—31.12.2024
0.6003ex2915907055Triethyl orthoformate (CAS RN 122-51-0)0 %—31.12.2023
0.4954ex2915907060Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)0 %—31.12.2020
0.6914ex29159070652-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3)0 %—31.12.2020
0.5217ex2915907080Ethyl difluoroacetate (CAS RN 454-31-9)0 %—31.12.2021
0.2585ex29161200102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)0 %—31.12.2023
0.3977ex29161200402,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)0 %—31.12.2023
0.5808ex29161200702-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)0 %—31.12.2022
0.3468ex2916130020Zinc dimethacrylate, in the form of powder (CAS RN 13189‐00‐9)0 %—31.12.2023
0.3466ex2916130030Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities0 %—31.12.2020
0.2638ex29161400102,3-Epoxypropyl methacrylate (CAS RN 106-91-2)0 %—31.12.2023
0.6190ex2916140020Ethyl methacrylate (CAS RN 97-63-2)0 %—31.12.2023
0.2951ex2916199520Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)0 %—31.12.2023
0.5991ex2916199540Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds0 %—31.12.2023
0.6238ex2916199550Methyl 2-fluoroacrylate (CAS RN 2343-89-7)0 %—31.12.2024
0.7023ex2916200015Transfluthrin (ISO) (CAS RN 118712-89-3)0 %—31.12.2021
0.7437ex2916200020Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RNs 80657-64-3 and 80623-07-0)0 %—31.12.2022
0.3463ex2916200050Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)0 %—31.12.2023
0.4931ex29162000603-Cyclohexylpropionic acid (CAS RN 701-97-3)0 %—31.12.2020
0.7531ex2916200070Cyclopropanecarbonyl chloride (CAS RN 4023-34-1)0 %—31.12.2023
0.5421ex2916310010Benzyl benzoate (CAS RN 120-51-4)0 %—31.12.2021
0.6248ex29163990133,5-Dinitrobenzoic acid (CAS RN 99-34-3)0 %—31.12.2024
0.5214ex29163990152-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)0 %—31.12.2021
0.2636ex29163990203,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)0 %—31.12.2023
0.7845ex29163990226-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more0 %—31.12.2024
0.6557ex2916399023(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)0 %—31.12.2024
0.4951ex29163990252-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)0 %—31.12.2021
0.7827ex2916399027Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more0 %—31.12.2024
0.4930ex29163990302,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)0 %—31.12.2020
0.7187ex2916399033Methyl 4'-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)0 %—31.12.2021
0.5944ex2916399035Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)0 %—31.12.2023
0.6794ex29163990414-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)0 %—31.12.2020
0.7734ex29163990432-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic acid (CAS RN 289686-70-0)0 %—31.12.2024
0.6121ex29163990483-Fluorobenzoyl chloride (CAS RN 1711-07-5)0 %—31.12.2023
0.2634ex29163990503,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)0 %—31.12.2023
0.6755ex29163990513-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7)0 %—31.12.2020
0.6661ex29163990535-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)0 %—31.12.2020
0.4238ex29163990554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %—31.12.2022
0.7678ex29163990572-Phenylprop-2-enoic acid (CAS RN 492-38-6)0 %—31.12.2023
0.6803ex29163990612-Phenylbutyric Acid (CAS RN 90-27-7)0 %—31.12.2020
0.3462ex2916399070Ibuprofen (INN) (CAS RN 15687-27-1)0 %—31.12.2023
0.7117ex2916399073(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)0 %—31.12.2021
0.5541ex2916399075m-Toluic acid (CAS RN 99-04-7)0 %—31.12.2022
0.5543ex2916399085(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)0 %—31.12.2022
0.3457ex2917110020Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)0 %—31.12.2023
0.4746ex2917110030Cobalt oxalate (CAS RN 814-89-1)0 %—31.12.2024
0.7563ex2917120020Bis(3,4-epoxycyclohexylmethyl) adipate (CAS RN 3130-19-6)0 %—31.12.2023
0.4684ex2917191010Dimethyl malonate (CAS RN 108-59-8)0 %—31.12.2024
0.5602ex2917191020Diethyl malonate (CAS RN 105-53-3)0 %—31.12.2022
0.6089ex2917198015Dimethyl but-2-ynedioate (CAS RN 762-42-5)0 %—31.12.2023
0.4790ex2917198030Ethylene brassylate (CAS RN 105-95-3)0 %—31.12.2024
0.7451ex2917198035Diethyl methylmalonate (CAS RN 609-08-5)0 %—31.12.2023
0.7880ex2917198045Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more0 %—31.12.2024
0.4918ex2917198050Tetradecanedioic acid (CAS RN 821-38-5)0 %—31.12.2020
0.3454ex2917198070Itaconic acid (CAS RN 97-65-4)0 %—31.12.2023
0.2631ex29172000301,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)0 %—31.12.2023
0.2627ex29172000403-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333‐84-6)0 %—31.12.2023
0.2954ex2917340010Diallyl phthalate (CAS RN 131-17-9)0 %—31.12.2023
0.4945ex2917399520Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)0 %—31.12.2020
0.6796ex2917399525Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)0 %—31.12.2020
0.3640ex2917399530Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)0 %—31.12.2020
0.6800ex29173995351-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)0 %—31.12.2020
0.6123ex2917399540Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)0 %—31.12.2023
0.6553ex29173995501,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)0 %—31.12.2024
0.6554ex2917399560Perylene-3,4:9,10-tetracarboxylic dianhydride (CAS RN 128‐69‐8)0 %—31.12.2024
0.6366ex2918193010Cholic acid (CAS RN 81-25-4)0 %—31.12.2024
0.6367ex29181930203-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)0 %—31.12.2024
0.2950ex2918199820L-Malic acid (CAS RN 97-67-6)0 %—31.12.2023
0.7702ex2918199830Ethyl 1-hydroxycyclopentanecarboxylate (CAS RN 41248-23-1)0 %—31.12.2024
0.7703ex2918199840Ethyl 1-hydroxycyclohexanecarboxylate (CAS RN 1127-01-1)0 %—31.12.2024
0.7907ex291819985012-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters0 %—31.12.2024
0.3637ex2918290010Monohydroxynaphthoic acids0 %—31.12.2023
0.5781ex2918290035Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)0 %—31.12.2022
0.3638ex2918290050Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)0 %—31.12.2023
0.5220ex2918290060Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026‐62‐0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457‐20‐2 or 4247‐02-3)0 %—31.12.2021
0.6456ex29182900703,5-Diiodosalicylic acid (CAS RN 133-91-5)0 %—31.12.2024
0.7344ex29183000152-fluoro-5-formylbenzoic acid (CAS RN 550363-85-4)0 %—31.12.2022
0.7605ex2918300025(E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2)0 %—31.12.2023
0.4427ex2918300030Methyl-2-benzoylbenzoate (CAS RN 606-28-0)0 %—31.12.2023
0.7864ex29183000353-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)0 %—31.12.2024
0.5857ex2918300050Ethyl acetoacetate (CAS RN 141-97-9)0 %—31.12.2022
0.6250ex29183000604-Oxovaleric acid (CAS RN 123-76-2)0 %—31.12.2024
0.6455ex29183000702-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)0 %—31.12.2024
0.7062ex2918300080Methyl benzoylformate (CAS RN 15206-55-0)0 %—31.12.2021
0.2946ex29189990103,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)0 %—31.12.2023
0.6814ex29189990133-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)0 %—31.12.2020
0.5856ex2918999015Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)0 %—31.12.2022
0.6901ex2918999018Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)0 %—31.12.2020
0.2949ex2918999020Methyl 3-methoxyacrylate (CAS RN 5788-17-0)0 %—31.12.2024
0.6983ex29189990231,8-Dihydroxyanthraquinone-3-carboxylic acid (CAS RN 478‐43-3)0 %—31.12.2021
0.6147ex2918999025Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)0 %—31.12.2023
0.7256ex2918999027Ethyl 3-ethoxypropionate (CAS RN 763-69-9)0 %—31.12.2022
0.2948ex2918999030Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)0 %—31.12.2023
0.7597ex2918999033Vanillic Acid (CAS RN 121-34-6) containing:not more than 10 ppm of Palladium (CAS RN 7440‐05‐3),not more than 10 ppm of bismuth (CAS RN 7440-69-9),not more than 14 ppm of formaldehyde (CAS RN 50‐00-0),not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3),not more than 0,5 % by weight of vanillin (CAS RN 121-33-5)0 %—31.12.2023
0.6342ex2918999035p-Anisic acid (CAS RN 100-09-4)0 %—31.12.2024
0.7358ex2918999038Diclofop-methyl (ISO) (CAS RN 51338-27-3)0 %—31.12.2022
0.2945ex2918999040trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)0 %—31.12.2023
0.6224ex29189990454-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)0 %—31.12.2024
0.2947ex2918999050Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)0 %—31.12.2023
0.6552ex2918999055Stearyl glycyrrhetinate(CAS RN 13832-70-7)0 %—31.12.2024
0.2943ex29189990603,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)0 %—31.12.2023
0.6523ex2918999065Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020‐52-0)0 %—31.12.2024
0.4742ex2918999070Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)0 %—31.12.2024
0.5496ex2918999080Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9)0 %—31.12.2021
0.6747ex2918999085Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more0 %—31.12.2020
0.2942ex29199000352,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100 μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique0 %—31.12.2023
0.7462ex2919900015Benzene-1,3-diyl tetraphenyl bis(phosphate) (CAS RN 57583‐54-7)0 %—31.12.2023
0.7723ex2919900025Triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2024
0.2940ex2919900030Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)0 %—31.12.2023
0.3867ex2919900040Tri-n-hexylphosphate (CAS RN 2528-39-4)0 %—31.12.2023
0.5495ex2919900050Triethyl phosphate (CAS RN 78-40-0)0 %—31.12.2021
0.6188ex2919900060Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)0 %—31.12.2023
0.6413ex2919900070Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)0 %—31.12.2024
0.2938ex2920190010Fenitrothion (ISO) (CAS RN 122-14-5)0 %—31.12.2023
0.2941ex2920190020Tolclofos-methyl (ISO) (CAS RN 57018-04-9)0 %—31.12.2023
0.6253ex29201900302,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide (CAS RN 4090-51-1)0 %—31.12.2024
0.363429202300Trimethyl phosphite (CAS RN 121-45-9)0 %—31.12.2023
0.415829202400Triethyl phosphite (CAS RN 122-52-1)0 %—31.12.2021
0.2626ex2920290010O,O'-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806‐34-6)0 %—31.12.2023
0.7227ex2920290015Phosphorous acid 3,3',5,5'-tetrakis(1,1-dimethylethyl)-6,6'-dimethyl[1,1'-biphenyl]-2,2'-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5)0 %—31.12.2022
0.5038ex2920290020Tris(methylphenyl)phosphite (CAS RN 25586-42-9)0 %—31.12.2020
0.5123ex29202900302,2'-[[3,3',5,5'-Tetrakis(1,1-dimethylethyl)[1,1'-biphenyl]-2,2'-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine] (CAS RN 138776-88-2)0 %—31.12.2020
0.5045ex2920290040Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)0 %—31.12.2020
0.6004ex2920290050Fosetyl-aluminium (CAS RN 39148-24-8)0 %—31.12.2023
0.7031ex2920290060Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides0 %—31.12.2021
0.7898ex29202900802,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a content of 95 % or more by weight (CAS RN 126050-54-2)0 %—31.12.2024
0.3635ex2920901010Diethyl sulphate (CAS RN 64-67-5)0 %—31.12.2023
0.7559ex2920901015Ethyl methyl carbonate (CAS RN 623-53-0)3,2 %—31.12.2020
0.2605ex2920901020Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3)0 %—31.12.2023
0.7560ex2920901025Diethyl carbonate (CAS RN 105-58-8)3,2 %—31.12.2020
0.7558ex2920901035Vinylene carbonate (CAS RN 872-36-6)3,2 %—31.12.2020
0.3685ex2920901040Dimethyl carbonate (CAS RN 616-38-6)0 %—31.12.2023
0.3868ex2920901050Di-tert-butyl dicarbonate (CAS RN 24424-99-5)0 %—31.12.2023
0.5756ex29209010602,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)0 %—31.12.2022
0.7068ex2920901080Sodium 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl sulphate (CAS RN 25446-78-0) in the form of a liquid paste with a content by weight in water of 62 % or more but not more than 65 %0 %—31.12.2021
0.7588ex2920907020Diethyl phosphorochloridate (CAS RN 814-49-3)0 %—31.12.2023
0.7465ex29209070302-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS RN 61676-62-8)0 %—31.12.2023
0.5947ex2920907060Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)0 %—31.12.2023
0.6598ex2920907080Bis(pinacolato)diboron (CAS RN 73183-34-3)0 %—31.12.2020
0.5668292113002-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)0 %—31.12.2022
0.3629ex2921199920Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)0 %—31.12.2023
0.3631ex2921199930Allylamine (CAS RN 107-11-9)0 %—31.12.2023
0.7073ex29211999452-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)0 %—31.12.2021
0.5650ex2921199970N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)0 %—31.12.2022
0.6269ex2921199980Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %—31.12.2024
0.3630ex2921290020Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)0 %—31.12.2023
0.3625ex2921290030Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855‐32‐1)0 %—31.12.2023
0.4917ex2921290040Decamethylenediamine (CAS RN 646-25-3)0 %—31.12.2020
0.5256ex2921290050N'-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine (CAS RN 6711-48-4)0 %—31.12.2021
0.7488ex29213010102-(4-(cyclopropanecarbonyl)phenyl)-2-methylpropanoic acid cyclohexylamine salt (CAS RN 1690344-90-1)0 %—31.12.2023
0.4862ex29213099301,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)0 %—31.12.2020
0.5768ex2921309940Cyclopropylamine (CAS RN 765-30-0)0 %—31.12.2022
0.7750ex2921309950Bicyclo[1.1.1]pentan-1-amine hydrochloride (CAS RN 22287‐35-0)0 %—31.12.2024
0.3909ex2921420025Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)0 %—31.12.2023
0.6615ex29214200332-Fluoroaniline (CAS RN 348-54-9)0 %—31.12.2020
0.3978ex29214200352-Nitroaniline (CAS RN 88-74-4)0 %—31.12.2023
0.6550ex2921420040Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)0 %—31.12.2024
0.3979ex29214200452,4,5-Trichloroaniline (CAS RN 636-30-6)0 %—31.12.2023
0.2620ex29214200503-Aminobenzenesulfonic acid (CAS RN 121-47-1)0 %—31.12.2023
0.7739ex29214200554-Chloroaniline (CAS RN 106-47-8)0 %—31.12.2024
0.3623ex29214200702-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)0 %—31.12.2024
0.3622ex29214200804-Chloro-2-nitroaniline (CAS RN 89-63-4)0 %—31.12.2023
0.3687ex29214200853,5-Dichloroaniline (CAS RN 626-43-7)0 %—31.12.2023
0.5616ex29214200862,5-Dichloroaniline (CAS RN 95-82-9)0 %—31.12.2022
0.5603ex2921420087N-Methylaniline (CAS RN 100-61-8)0 %—31.12.2022
0.5617ex29214200883,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)0 %—31.12.2022
0.2617ex29214300204-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)0 %—31.12.2023
0.2615ex29214300303-Nitro-p-toluidine (CAS RN 119-32-4)0 %—31.12.2023
0.3980ex29214300404-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)0 %—31.12.2024
0.5125ex29214300504-Aminobenzotrifluoride (CAS RN 455-14-1)0 %—31.12.2020
0.5124ex29214300603-Aminobenzotrifluoride (CAS RN 98-16-8)0 %—31.12.2020
0.7583ex29214300705-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3)0 %—31.12.2023
0.3621ex2921440020Diphenylamine (CAS RN 122-39-4)0 %—31.12.2023
0.2618ex29214500202-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)0 %—31.12.2024
0.7628ex2921450030(5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548‐48-2)0 %—31.12.2023
0.5994ex29214500507-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)0 %—31.12.2024
0.7316ex29214500601-Naphthylamine (CAS RN 134-32-7)0 %—31.12.2022
0.7315ex29214500708-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8)0 %—31.12.2022
0.7629ex29214500802-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3)0 %—31.12.2023
0.3618ex2921490020Pendimethalin (ISO) (CAS RN 40487-42-1)3,5 %—31.12.2023
0.7705ex29214900304-Isopropylaniline (CAS RN 99-88-7)0 %—31.12.2024
0.7592ex29214900352-Ethylaniline (CAS RN 578-54-1)0 %—31.12.2023
0.2609ex2921490040N-1-Naphthylaniline (CAS RN 90-30-2)0 %—31.12.2023
0.6825ex29214900602,6-Diisopropylaniline (CAS RN 24544-04-5)0 %—31.12.2020
0.5126ex29214900804-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)0 %—31.12.2020
0.3981ex29215119302-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)0 %—31.12.2023
0.4184ex2921511940p-Phenylenediamine (CAS RN 106-50-3)0 %—31.12.2021
0.4498ex2921511950Mono- and dichloroderivatives of p-phenylenediamine and p‐diaminotoluene0 %—31.12.2024
0.5995ex29215119602,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)0 %—31.12.2024
0.6595ex29215119704-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7)0 %—31.12.2020
0.7894ex2921519010N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more0 %—31.12.2024
0.2612ex2921599010Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8)0 %—31.12.2023
0.3785ex29215990303,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %—31.12.2022
0.3870ex29215990404,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8)0 %—31.12.2023
0.5509ex2921599060(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)0 %—31.12.2022
0.6616ex2921599070Tris(4-aminophenyl)methane (CAS RN 548-61-8)0 %—31.12.2020
0.7860ex2922190015Aqueous solution, containing by weight:73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)0 %—31.12.2024
0.5757ex29221900202-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)0 %—31.12.2022
0.3617ex2922190030N,N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine) (CAS RN 3033‐62-3)0 %—31.12.2023
0.6947ex29221900352-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)0 %—31.12.2020
0.7179ex2922190040(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)0 %—31.12.2021
0.7480ex29221900452-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2)0 %—31.12.2023
0.3616ex29221900502-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)0 %—31.12.2024
0.7587ex29221900553-Aminoadamantan-1-ol (CAS RN 702-82-9)0 %—31.12.2023
0.3871ex2922190060N,N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine) (CAS RN 83016-70-0)0 %—31.12.2023
0.5905ex2922190065trans-4-Aminocyclohexanol (CAS RN 27489-62-9)0 %—31.12.2023
0.5986ex29221900752-Ethoxyethylamine (CAS RN 110-76-9)0 %—31.12.2023
0.4665ex2922190080N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)0 %—31.12.2024
0.5911ex2922190085(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)0 %—31.12.2023
0.5996ex29222100102-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)0 %—31.12.2024
0.2703ex29222100306-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90‐51-7)0 %—31.12.2024
0.2704ex29222100407-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87‐02-5)0 %—31.12.2023
0.3873ex2922210050Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)0 %—31.12.2024
0.5997ex29222100604-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)0 %—31.12.2023
0.2702ex29222900203-Aminophenol (CAS RN 591-27-5)0 %—31.12.2023
0.3982ex29222900255-Amino-o-cresol (CAS RN 2835-95-2)0 %—31.12.2023
0.6624ex29222900301,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)0 %—31.12.2020
0.7642ex2922290033o-Phenetidine (CAS RN 94-70-2)0 %—31.12.2023
0.6653ex29222900404-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7)0 %—31.12.2020
0.2936ex2922290045Anisidines0 %—31.12.2023
0.6634ex2922290063Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more0 %—31.12.2020
0.4627ex29222900654-Trifluoromethoxyaniline (CAS RN 461-82-5)0 %—31.12.2024
0.7481ex29222900674-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1)0 %—31.12.2023
0.2692ex29222900704-Nitro-o-anisidine (CAS RN 97-52-9)0 %—31.12.2023
0.7026ex2922290073Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)0 %—31.12.2021
0.4956ex29222900754-(2-Aminoethyl)phenol (CAS RN 51-67-2)0 %—31.12.2020
0.2696ex29222900803-Diethylaminophenol (CAS RN 91-68-9)0 %—31.12.2023
0.5898ex29222900854-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)0 %—31.12.2023
0.2690ex29223900101-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts0 %—31.12.2023
0.7371ex29223900152-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9)0 %—31.12.2022
0.4914ex29223900202-Amino-5-chlorobenzophenone (CAS RN 719-59-5)0 %—31.12.2020
0.6838ex29223900253-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5)0 %—31.12.2020
0.7713ex2922390030(2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone (CAS RN 735-06-8)0 %—31.12.2024
0.6761ex29223900355-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)0 %—31.12.2020
0.7800ex29223900404,4'-Bis(diethylamino)benzophenone (CAS RN 90-93-7)0 %—31.12.2024
0.3546ex2922430010Anthranilic acid (CAS RN 118-92-3)0 %—31.12.2023
0.3547ex2922498510Ornithine aspartate (INNM) (CAS RN 3230-94-2)0 %—31.12.2023
0.7853ex2922498513O-Benzylglycine p-toluenesulphonate (CAS RN 1738-76-7) with a purity by weight of 93 % or more0 %—31.12.2024
0.5619ex29224985203-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)0 %—31.12.2022
0.6340ex2922498525Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372‐81‐6)0 %—31.12.2024
0.6948ex2922498530Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)0 %—31.12.2020
0.6969ex29224985352- (3-Amino-4-chloro-benzoyl) benzoic acid (CAS RN 118‐04‐7)0 %—31.12.2021
0.3544ex2922498540Norvaline0 %—31.12.2023
0.5037ex2922498517Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %—31.12.2020
0.3983ex2922498550D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)0 %—31.12.2024
0.4239ex2922498560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %—31.12.2022
0.6650ex2922498565Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)0 %—31.12.2020
0.4426ex29224985702-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)0 %—31.12.2023
0.7254ex2922498575L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)0 %—31.12.2022
0.6100ex292249858012-Aminododecanoic acid (CAS RN 693-57-2)0 %—31.12.2023
0.7784ex2922498585Ethyl 4-[[(methylphenylamino)methylene]amino]benzoate (CAS RN 57834-33-0)0 %—30.06.2020
0.7020ex29225000102-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)0 %—31.12.2021
0.7257ex29225000153,5-Diiodothyronine (CAS RN 1041-01-6)0 %—31.12.2022
0.4702ex29225000201-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)0 %—31.12.2024
0.7523ex2922500035(2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic acid hydrochloride (CAS RN 5486-79-3)0 %—31.12.2023
0.2681ex29225000702-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate0 %—31.12.2023
0.6226ex2923100010Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)0 %—31.12.2024
0.3543ex2923900010Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (±0,5 %) by weight of tetramethylammonium hydroxide0 %—31.12.2023
0.4499ex2923900025Tetrakis(dimethylditetradecylammonium) molybdate (CAS RN 117342‐25‐3)0 %—31.12.2023
0.7879ex2923900050Betaine hydrochloride (CAS RN 590-46-5) with a purity by weight of 93 % or more0 %—31.12.2024
0.7089ex2923900055Tetrabutylammonium bromide (CAS RN 1643-19-2)0 %—31.12.2021
0.7615ex2923900065N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 %0 %—31.12.2023
0.3538ex2923900070Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:40 % (± 2 %) by weight of tetrapropylammonium hydroxide,0,3 % by weight or less of carbonate,0,1 % by weight or less of tripropylamine,500 mg/kg or less of bromide, and25 mg/kg or less of potassium and sodium taken together0 %—31.12.2023
0.5063ex2923900075Tetraethylammonium hydroxide, in the form of an aqueous solution containing:35 % (±0,5 %) by weight of tetraethylammonium hydroxide,not more than 1000 mg/kg of chloride,not more than 2 mg/kg of iron, andnot more than 10 mg/kg of potassium0 %—31.12.2020
0.3536ex2923900080Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride0 %—31.12.2023
0.6410ex2923900085N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)0 %—31.12.2024
0.2678ex29241900102-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214‐89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)0 %—31.12.2023
0.6227ex2924190015N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)0 %—31.12.2024
0.6597ex2924190020(R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid (CAS RN 181289-33-8)0 %—31.12.2020
0.7258ex2924190025Isobutylidenediurea (CAS RN 6104-30-9)0 %—31.12.2022
0.3535ex2924190030Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)0 %—31.12.2023
0.6549ex2924190035Acetamide (CAS RN 60-35-5)0 %—31.12.2024
0.6996ex29241900453-Chloro-N-methoxy-N-methylpropanamide (CAS RN 1062512‐53-1)0 %—31.12.2021
0.3689ex2924190023Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more2 %—31.12.2021
0.7060ex29241900552-Propynyl butylcarbamate (CAS RN 76114-73-3)0 %—31.12.2021
0.4160ex2924190060N,N-Dimethylacrylamide (CAS RN 2680-03-7)0 %—31.12.2021
0.7482ex29241900652,2,2-trifluoroacetamide (CAS RN 354-38-1)0 %—31.12.2023
0.4380ex2924190070Methylcarbamate (CAS RN 598-55-0)0 %—31.12.2023
0.7575ex2924190075(S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0)0 %—31.12.2023
0.5605ex2924190080Tetrabutylurea (CAS RN 4559-86-8)0 %—31.12.2022
0.2939ex29242100104,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts0 %—31.12.2023
0.5998ex2924210020(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)0 %—31.12.2024
0.353329242500Alachlor (ISO) (CAS RN 15972-60-8)0 %—31.12.2023
0.6047ex29242970124-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88‐64-2)0 %—31.12.2024
0.3534ex2924297015Acetochlor (ISO) (CAS RN 34256-82-1)0 %—31.12.2023
0.6266ex29242970172-(Trifluoromethyl)benzamide (CAS RN 360-64-5)0 %—31.12.2024
0.6363ex29242970192-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)0 %—31.12.2024
0.4685ex29242970202-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)0 %—31.12.2024
0.6568ex2924297023Benalaxyl-M (ISO) (CAS RN 98243-83-5)0 %—31.12.2024
0.5226ex29242970272-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)0 %—31.12.2021
0.7118ex2924297030Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)0 %—31.12.2021
0.6110ex2924297037Beflubutamid (ISO) (CAS RN 113614-08-7)0 %—31.12.2023
0.5066ex2924297040N,N'-1,4-Phenylenebis[3-oxobutyramide] (CAS RN 24731‐73‐5)0 %—31.12.2020
0.5127ex2924297045Propoxur (ISO) (CAS RN 114-26-1)0 %—31.12.2020
0.7841ex2924297047(S)-tert-butyl(1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more0 %—31.12.2024
0.7113ex2924297050N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)0 %—31.12.2021
0.5622ex29242970534-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)0 %—31.12.2022
0.5069ex2924297055N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304‐50-5)0 %—31.12.2020
0.5067ex2924297060N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1)0 %—31.12.2020
0.6832ex2924297061(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288‐8)0 %—31.12.2020
0.6767ex29242970622-Chlorobenzamide (CAS RN 609-66-5)0 %—31.12.2020
0.5388ex2924297063N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711‐79-0)0 %—31.12.2021
0.6766ex2924297064N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179‐03-8)0 %—31.12.2020
0.7632ex2924297067N,N'-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487‐09-2)0 %—31.12.2023
0.7582ex2924297070N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide0 %—31.12.2023
0.6480ex2924297073Napropamide (ISO) (CAS RN 15299-99-7)0 %—31.12.2024
0.2672ex29242970753-Amino-p-anisanilide (CAS RN 120-35-4)0 %—31.12.2023
0.2673ex2924297085p-Aminobenzamide (CAS RN 2835-68-9)0 %—31.12.2023
0.4257ex2924297086Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more0 %—31.12.2022
0.4495ex29242970885'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide (CAS RN 135‐63-7)0 %—31.12.2023
0.4493ex2924297089Flutolanil (ISO) (CAS RN 66332-96-5)0 %—31.12.2023
0.3690ex29242970913-Hydroxy-2'-methoxy-2-naphthanilide (CAS RN 135-62-6)0 %—31.12.2023
0.3691ex29242970923-Hydroxy-2-naphthanilide (CAS RN 92-77-3)0 %—31.12.2024
0.3692ex29242970933-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5)0 %—31.12.2023
0.3693ex29242970942'-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)0 %—31.12.2023
0.3863ex29242970971,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)0 %—31.12.2023
0.3526ex2925110020Saccharin and its sodium salt0 %—31.12.2023
0.2674ex2925199510N-Phenylmaleimide (CAS RN 941-69-5)0 %—31.12.2023
0.5612ex29251995204,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)0 %—31.12.2022
0.5740ex2925199530N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)0 %—31.12.2022
0.2934ex2925290010Dicyclohexylcarbodiimide (CAS RN 538-75-0)0 %—31.12.2023
0.5891ex2925290020N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)0 %—31.12.2023
0.6636ex2925290030Guanidine sulphamate (CAS RN 50979-18-5)0 %—31.12.2020
0.7749ex2925290040N-amidinosarcosine (CAS RN 57-00-1)0 %—31.12.2024
0.7832ex2925290050(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more0 %—31.12.2024
0.6786ex2926907014Cyanoacetic acid (CAS RN 372-09-8)0 %—31.12.2020
0.7430ex29269070152-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0)0 %—31.12.2022
0.6258ex29269070164-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)0 %—31.12.2024
0.6934ex2926907017Cypermethrin (ISO) with its stereoisomers (CAS RN 52315‐07‐8) with a purity by weight of 90 % or more0 %—31.12.2020
0.7408ex2926907018Flumethrin (ISO) (CAS RN 69770-45-2)0 %—31.12.2022
0.7466ex29269070192-(4-amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2)0 %—31.12.2023
0.2668ex29269070202-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)0 %—31.12.2024
0.7458ex29269070214-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9)0 %—31.12.2023
0.7514ex2926907022Acetonitrile (CAS RN 75-05-8)0 %—31.12.2023
0.6109ex2926907023Acrinathrin (ISO) (CAS RN 101007-06-1)0 %—31.12.2023
0.7805ex29269070242-Hydroxy-2-methylpropiononitrile (CAS RN 75-86-5) with a purity by weight of 99 % or more0 %—31.12.2024
0.5227ex29269070252,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)0 %—31.12.2021
0.6149ex2926907027Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)0 %—31.12.2023
0.7201ex29269070304,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)0 %—31.12.2021
0.7406ex2926907033Deltamethrin (ISO) (CAS RN 52918-63-5)0 %—31.12.2022
0.7034ex29269070354-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)0 %—31.12.2021
0.6970ex29269070402-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6)0 %—31.12.2021
0.3522ex2926907050Alkyl or alkoxyalkyl esters of cyanoacetic acid0 %—31.12.2023
0.6259ex2926907026Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products0 %—31.12.2024
0.4182ex2926907061m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)0 %—31.12.2021
0.4644ex2926907064Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers0 %—31.12.2024
0.4802ex2926907070Methacrylonitrile (CAS RN 126-98-7)0 %—31.12.2024
0.2543ex2926907074Chlorothalonil (ISO) (CAS RN 1897-45-6)0 %—31.12.2024
0.3521ex2926907075Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453‐11‐0)0 %—31.12.2024
0.3516ex2926907080Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)0 %—31.12.2023
0.3514ex2926907086Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)0 %—31.12.2023
0.3515ex2926907089Butyronitrile (CAS RN 109-74-0)0 %—31.12.2023
0.2667ex29270000102,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride0 %—31.12.2023
0.2665ex29270000204-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305‐05-2)0 %—31.12.2023
0.7337ex29270000252,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)0 %—31.12.2022
0.2810ex29270000304'-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)0 %—31.12.2023
0.6306ex2927000035C,C'-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180°C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam0 %—31.12.2024
0.3984ex29270000604,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0)0 %—31.12.2023
0.5626ex29270000804-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867‐77-7)0 %—31.12.2022
0.2661ex29280090103,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-bipropionamide (CAS RN 32687-78-8)0 %—31.12.2023
0.6479ex2928009013Cymoxanil (ISO) (CAS RN 57966-95-7)0 %—31.12.2024
0.6548ex2928009018Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more0 %—31.12.2024
0.6871ex2928009023Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more0 %—31.12.2020
0.4929ex2928009025Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution0 %—31.12.2020
0.6985ex2928009028Pentan-2-one oxime (CAS RN 623-40-5)0 %—31.12.2021
0.5438ex2928009030N-Isopropylhydroxylamine (CAS RN 5080-22-8)0 %—31.12.2021
0.7448ex29280090334-Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7)0 %—31.12.2023
0.2659ex2928009040O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624‐86-2)0 %—31.12.2023
0.5919ex2928009045Tebufenozide (ISO) (CAS RN 112410-23-8)0 %—31.12.2023
0.6635ex2928009050Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %0 %—31.12.2020
0.5918ex2928009055Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)0 %—31.12.2023
0.6364ex29280090652-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride0 %—31.12.2024
0.4544ex2928009070Butanone oxime (CAS RN 96-29-7)0 %—31.12.2023
0.5228ex2928009075Metaflumizone (ISO) (CAS RN 139968-49-3)0 %—31.12.2021
0.3510ex2928009080Cyflufenamid (ISO) (CAS RN 180409-60-3)0 %—31.12.2023
0.5266ex2928009085Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)0 %—31.12.2021
0.4714ex29291000153,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate (CAS RN 91‐97‐4)0 %—31.12.2024
0.5827ex2929100020Butyl isocyanate (CAS RN 111-36-4)0 %—31.12.2022
0.2660ex2929100040m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094‐99-7)0 %—31.12.2023
0.2657ex2929100050m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)0 %—31.12.2023
0.5033ex29291000552,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)0 %—31.12.2022
0.3509ex2929100060Trimethylhexamethylene diisocyanate, mixed isomers0 %—31.12.2023
0.4188ex29291000801,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)0 %—31.12.2022
0.4298ex2930200010Prosulfocarb (ISO) (CAS RN 52888-80-9)0 %—31.12.2022
0.5278ex29302000202-Isopropylethylthiocarbamate (CAS RN 141-98-0)0 %—31.12.2021
0.5035ex29309098102,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)0 %—31.12.2020
0.7483ex29309098124,4'-Sulfonyldiphenol (CAS RN 80-09-1) used in the manufacture of polyarylsulfones or polyarylethersulfones0 %—31.12.2023
0.5390ex2930909813Mercaptamine hydrochloride (CAS RN 156-57-0)0 %—31.12.2021
0.2932ex2930909815Ethoprophos (ISO) (CAS RN 13194-48-4)0 %—31.12.2023
0.6551ex29309098163-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)0 %—31.12.2024
0.5999ex29309098172-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)0 %—31.12.2024
0.7748ex2930909818Dimethyl sulfone (CAS RN 67-71-0)0 %—31.12.2024
0.6768ex2930909819N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N'-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2)0 %—31.12.2020
0.7799ex29309098204-(4-Methylphenylthio)benzophenone (CAS RN 83846-85-9)0 %—31.12.2024
0.6750ex2930909821[2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)0 %—31.12.2021
0.6769ex2930909822Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more0 %—31.12.2020
0.5899ex2930909823Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)0 %—31.12.2023
0.7714ex2930909824Phenyl vinyl sulfone (CAS RN 5535-48-8)0 %—31.12.2024
0.2930ex2930909825Thiophanate-methyl (ISO) (CAS RN 23564-05-8)0 %—31.12.2023
0.6873ex2930909826Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more0 %—31.12.2020
0.6585ex29309098272-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)0 %—31.12.2024
0.7859ex29309098294-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more0 %—31.12.2024
0.2933ex29309098304-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)0 %—31.12.2023
0.7833ex2930909831(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more0 %—31.12.2024
0.6584ex29309098332-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)0 %—31.12.2024
0.3811ex2930909835Glutathione (CAS RN 70-18-8)0 %—31.12.2021
0.7682ex2930909838Allyl isothiocyanate (CAS RN 57-06-7)0 %—31.12.2023
0.2928ex29309098403,3'-Thiodi(propionic acid) (CAS RN 111-17-1)0 %—31.12.2023
0.6167ex2930909843Trimethylsulfoxonium iodide (CAS RN 1774-47-6)0 %—31.12.2023
0.2931ex29309098452-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)0 %—31.12.2024
0.7689ex29309098503-Mercaptopropionic acid (CAS RN 107-96-0)0 %—31.12.2023
0.6617ex2930909853Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)0 %—31.12.2020
0.5114ex2930909855Thiourea (CAS RN 62-56-6)0 %—31.12.2020
0.6619ex2930909857Methyl (methylthio)acetate (CAS RN 16630-66-3)0 %—31.12.2020
0.2929ex2930909860Methyl phenyl sulphide (CAS RN 100-68-5)0 %—31.12.2023
0.4629ex29309098643-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961‐52‐2)0 %—31.12.2024
0.5034ex2930909865Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575‐23-7)0 %—31.12.2022
0.4296ex2930909868Clethodim (ISO) (CAS RN 99129-21-2)0 %—31.12.2022
0.3986ex29309098774-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042‐18-7)0 %—31.12.2023
0.4187ex29309098784-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)0 %—31.12.2021
0.2999ex2930909880Captan (ISO) (CAS RN 133-06-2)0 %—31.12.2023
0.4694ex2930909881Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)3 %—31.12.2024
0.7037ex29309098852-Methyl-1-(methylthio)-2-propanamine (CAS RN 36567-04-1)0 %—31.12.2021
0.4094ex2930909889Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates0 %—31.12.2021
0.7070ex29309098931-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8)0 %—31.12.2021
0.7078ex2930909895N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6)0 %—31.12.2021
0.7086ex2930909897Diphenyl sulphone (CAS RN 127-63-9)0 %—31.12.2021
0.5741ex2931399008Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution0 %—31.12.2022
0.5492ex2931399013Trioctylphosphine oxide (CAS RN 78-50-2)0 %—31.12.2021
0.6088ex2931399023Di-tert-butylphosphane (CAS RN 819-19-2)0 %—31.12.2023
0.5758ex2931399025(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)0 %—31.12.2022
0.2656ex2931399038N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more0 %—31.12.2024
0.3497ex2931399030Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)0 %—31.12.2023
0.7533ex2931399035Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7)0 %—31.12.2023
0.5229ex2931399040Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124‐64-1)0 %—31.12.2021
0.4433ex2931399045Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS RN 75980-60-8)0 %—31.12.2023
0.3492ex2931399048Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)0 %—31.12.2024
0.7709ex29313990502-Chloroethylphosphonic acid (CAS RN 16672-87-0) solid or in aqueous solution, with a content by weight of 2‐Chloroethylphosphonic acid of 65 % or more0 %—31.12.2024
0.3987ex29313990553-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657‐64-8)0 %—31.12.2023
0.6608ex2931399057Trimethyl phosphonoacetate (CAS RN 5927-18-4)0 %—31.12.2020
0.3504ex2931900003Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane0 %—31.12.2023
0.4905ex2931900005Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN0 %—31.12.2020
0.7354ex2931900010(3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589‐57‐0)0 %—31.12.2022
0.4515ex2931900015Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl0 %—31.12.2024
0.7320ex2931900020Ferrocene (CAS RN 102-54-5)0 %—31.12.2022
0.3499ex2931900033Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492‐55‐7)0 %—31.12.2024
0.2654ex2931900035N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)0 %—31.12.2024
0.4121ex2931900050Trimethylsilane (CAS RN 993-07-7)0 %—31.12.2021
0.6916ex29319000604-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1)0 %—31.12.2020
0.6917ex2931900063Chloroethenyldimethylsilane (CAS RN 1719-58-0)0 %—31.12.2020
0.6946ex2931900065Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358‐25‐6)0 %—31.12.2020
0.6928ex2931900067Dimethyltin dioleate (CAS RN 3865-34-7)0 %—31.12.2020
0.6795ex2931900070(4-Propylphenyl)boronic acid (CAS RN 134150-01-9)0 %—31.12.2020
0.3486ex2932130010Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)0 %—31.12.2023
0.4590ex29321400101,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)0 %—31.12.2024
0.6787ex2932190020Tetrahydrofuran-borane (CAS RN 14044-65-6)0 %—31.12.2020
0.3488ex2932190040Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more0 %—31.12.2024
0.4514ex29321900412,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)0 %—31.12.2024
0.7614ex2932190065Tefuryltrione (ISO) (CAS RN 473278-76-1)0 %—31.12.2023
0.3487ex2932190070Furfurylamine (CAS RN 617-89-0)0 %—31.12.2024
0.3611ex2932190075Tetrahydro-2-methylfuran (CAS RN 96-47-9)0 %—31.12.2023
0.5240ex29321900805-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)0 %—31.12.2021
0.2775ex29322090102'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 70516-41-5)0 %—31.12.2023
0.5257ex2932209015Coumarin (CAS RN 91-64-5)0 %—31.12.2021
0.5611ex2932209040(S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)0 %—31.12.2022
0.6094ex29322090452,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)0 %—31.12.2023
0.7283ex2932209050L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076‐17-0) or dilactide (CAS RN 95-96-5)0 %—31.12.2022
0.7838ex2932209053(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more0 %—31.12.2024
0.2765ex29322090556-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)0 %—31.12.2023
0.4162ex29322090606'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 29512-49-0)0 %—31.12.2021
0.7812ex2932209063Selamectin (INN) 5Z-isomer (CAS RN 220119-17-5)0 %—31.12.2024
0.6620ex2932209065Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)0 %—31.12.2020
0.4161ex29322090716'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 89331-94-2)0 %—31.12.2021
0.7599ex29322090753-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520‐45‐6)0 %—31.12.2023
0.3990ex2932209080Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77‐06‐5)0 %—31.12.2023
0.4403ex2932209084Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)0 %—31.12.2023
0.3610ex2932990010Bendiocarb (ISO) (CAS RN 22781-23-3)0 %—31.12.2023
0.7202ex2932990013(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)0 %—31.12.2021
0.5269ex29329900151,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)0 %—31.12.2021
0.7178ex29329900184-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)0 %—31.12.2021
0.5387ex2932990020Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)0 %—31.12.2021
0.7431ex29329900232-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)0 %—31.12.2022
0.5759ex29329900251-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)0 %—31.12.2022
0.7639ex2932990027(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4)0 %—31.12.2023
0.7535ex29329900333-hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8)0 %—31.12.2023
0.7855ex29329900374-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol (CAS RN 1951-26-4) with a purity by weight of 99 % or more0 %—31.12.2024
0.6243ex2932990043Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more0 %—31.12.2024
0.5915ex29329900452-Butylbenzofuran (CAS RN 4265-27-4)0 %—31.12.2024
0.7766ex293299004712H-[1]Benzofuro[3,2-c][1]benzoxepin-6-one (CAS RN 28763‐77-1)0 %—31.12.2024
0.4907ex29329900507-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)0 %—31.12.2020
0.6113ex29329900531,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388‐70‐3)0 %—31.12.2023
0.6771ex29329900654,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280‐22-5)0 %—31.12.2020
0.4105ex29329900701,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)0 %—31.12.2021
0.4063ex29329900753-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)0 %—31.12.2021
0.4106ex29329900801,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)0 %—31.12.2023
0.3697ex29329900851,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)0 %—31.12.2023
0.7903ex29331990133-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more0 %—31.12.2024
0.6262ex2933199015Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more0 %—31.12.2024
0.7835ex29331990171,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more0 %—31.12.2024
0.7918ex2933199023Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more0 %—31.12.2024
0.6261ex29331990253-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)0 %—31.12.2024
0.7836ex29331990273-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more0 %—31.12.2024
0.3699ex29331990303-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)0 %—31.12.2023
0.6626ex29331990351,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS RN 191614-02-5)0 %—31.12.2020
0.3877ex2933199040Edaravone (INN) (CAS RN 89-25-8)0 %—31.12.2023
0.7119ex29331990455-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)0 %—31.12.2021
0.3992ex2933199050Fenpyroximate (ISO) (CAS RN 134098-61-6)0 %—31.12.2024
0.7182ex29331990555-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)0 %—31.12.2021
0.4494ex2933199060Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)0 %—31.12.2024
0.7576ex29331990654-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120‐52‐2)0 %—31.12.2023
0.4404ex29331990704,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)0 %—31.12.2023
0.7811ex2933199033Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine0 %—31.12.2024
0.5615ex29331990803-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)0 %—31.12.2022
0.6745ex2933210035Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97 % or more0 %—30.06.2020
0.4084ex29332100501-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)0 %—31.12.2021
0.6835ex29332100551-Aminohydantoin hydrochloride (CAS RN 2827-56-7)0 %—31.12.2020
0.4088ex2933210060DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)0 %—31.12.2021
0.5115ex29332100805,5-Dimethylhydantoin (CAS RN 77-71-4)0 %—31.12.2020
0.5972ex2933299015Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)0 %—31.12.2023
0.7527ex29332990182-(2-chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl-1H-imidazole (CAS RN 7189-82-4)0 %—31.12.2023
0.5920ex2933299025Prochloraz (ISO) (CAS RN 67747-09-5)0 %—31.12.2023
0.5921ex2933299045Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)0 %—31.12.2023
0.2752ex29332990501,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)0 %—31.12.2023
0.6263ex2933299055Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more0 %—31.12.2024
0.5215ex29332990601-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)0 %—31.12.2021
0.6758ex2933299065(S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8)0 %—31.12.2020
0.5470ex2933299070Cyazofamid (ISO) (CAS RN 120116-88-3)0 %—31.12.2021
0.7120ex29332990752,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)0 %—31.12.2021
0.5821ex2933299080Imazalil (ISO) (CAS RN 35554-44-0)0 %—31.12.2022
0.641529333950Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)0 %—31.12.2024
0.7186ex29333999102-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)0 %—31.12.2021
0.6462ex29333999112-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)0 %—31.12.2024
0.5608ex29333999122,3-Dichloropyridine (CAS RN 2402-77-9)0 %—31.12.2022
0.6756ex2933399913Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194‐96‐6)0 %—31.12.2020
0.6812ex2933399914N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)0 %—31.12.2020
0.6788ex2933399916Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6)0 %—31.12.2020
0.6941ex29333999173,5-Dimethylpyridine (CAS RN 591-22-0)0 %—31.12.2020
0.6902ex2933399919Methyl nicotinate (INNM) (CAS RN 93-60-7)0 %—31.12.2020
0.4842ex2933399920Copper pyrithione powder (CAS RN 14915-37-8)0 %—31.12.2020
0.6545ex2933399921Boscalid (ISO) (CAS RN 188425-85-6)0 %—31.12.2024
0.6900ex29333999232-Chloro-3-cyanopyridine (CAS RN 6602-54-6)0 %—31.12.2020
0.4594ex29333999242-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)0 %—31.12.2024
0.3604ex2933399925Imazethapyr (ISO) (CAS RN 81335-77-5)0 %—31.12.2023
0.6813ex29333999262-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)0 %—31.12.2020
0.7091ex2933399927Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)0 %—31.12.2021
0.6368ex2933399928Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)0 %—31.12.2024
0.6966ex29333999293,5-Dichloro-2-cyanopyridine (CAS RN 85331-33-5)0 %—31.12.2021
0.6458ex29333999312-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)0 %—31.12.2024
0.5241ex29333999322-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)0 %—31.12.2021
0.7181ex29333999335-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)0 %—31.12.2021
0.3878ex2933399935Aminopyralid (ISO) (CAS RN 150114-71-9)0 %—31.12.2023
0.7296ex29333999361-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)0 %—31.12.2022
0.5230ex2933399937Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)0 %—31.12.2021
0.7348ex2933399938(2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6)0 %—31.12.2022
0.7349ex29333999392,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4)0 %—31.12.2022
0.7184ex29333999412-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)0 %—31.12.2021
0.7121ex2933399946Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more0 %—31.12.2021
0.4706ex2933399947(-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)0 %—31.12.2021
0.4749ex2933399948Flonicamid (ISO) (CAS RN 158062-67-0)0 %—31.12.2024
0.7352ex29333999512,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8)0 %—31.12.2022
0.5610ex29333999526-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)0 %—31.12.2023
0.7456ex29333999544-methyl-2-pyridylamine (CAS RN 695-34-1)0 %—31.12.2023
0.4646ex2933399955Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more0 %—31.12.2024
0.5760ex2933399957Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)0 %—31.12.2022
0.7598ex2933399959Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0)0 %—31.12.2023
0.2750ex29333999602-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)0 %—31.12.2023
0.7584ex29333999616-Bromopyridin-2-amine (CAS RN 19798-81-3)0 %—31.12.2023
0.7577ex2933399962Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4)0 %—31.12.2023
0.7617ex2933399964Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8)0 %—31.12.2023
0.3602ex2933399965Acetamiprid (ISO) (CAS RN 135410-20-7)0 %—31.12.2023
0.5946ex2933399967(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387‐74‐2)0 %—31.12.2023
0.7616ex29333999681-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319‐02-8) with a purity by weight of 85 % or more0 %—31.12.2023
0.5494ex29333999702,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)0 %—31.12.2021
0.7704ex2933399971Diflufenican (ISO) (CAS RN 83164-33-4)0 %—31.12.2024
0.5462ex29333999725,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4)0 %—31.12.2021
0.7737ex29333999736-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine hydrochloride0 %—31.12.2024
0.7844ex29333999744-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more0 %—31.12.2024
0.7813ex2933399976Apalutamide (INN) (CAS RN 956104-40-8)0 %—31.12.2024
0.5922ex2933399977Imazamox (ISO) (CAS RN 114311-32-9)0 %—31.12.2023
0.7818ex2933399978Niraparib tosylate monohydrate (INNM) (CAS RN 1613220‐15‐7)0 %—31.12.2024
0.7754ex2933399979Avibactam (INN) – sodium (CAS RN 1192491-61-4)0 %—31.12.2024
0.7906ex29333999814-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more0 %—31.12.2024
0.7866ex2933399982Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a purity by dry weight of 92 % or more0 %—31.12.2024
0.5129ex29333999852-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)0 %—31.12.2020
0.3603ex2933491010Quinmerac (ISO) (CAS RN 90717-03-6)0 %—31.12.2023
0.4525ex29334910203-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117‐57-7)0 %—31.12.2023
0.5761ex2933491030Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)0 %—31.12.2022
0.6339ex29334910404,7-Dichloroquinoline (CAS RN 86-98-6)0 %—31.12.2024
0.6773ex29334910501-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)0 %—31.12.2020
0.7500ex29334910ex293349906065Roxadustat (INN) (CAS RN 808118-40-3)0 %—31.12.2023
0.7098ex2933499025Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)0 %—31.12.2021
0.4927ex2933499030Quinoline (CAS RN 91-22-5)0 %—31.12.2020
0.6601ex2933499035[1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3)0 %—31.12.2020
0.4926ex2933499040Isoquinoline (CAS RN 119-65-3)0 %—31.12.2020
0.7524ex29334990456,7-Dimethoxy-3,4- dihydroisoquinoline hydrochloride (CAS RN 20232‐39‐7)0 %—31.12.2023
0.3880ex2933499070Quinolin-8-ol (CAS RN 148-24-3)0 %—31.12.2023
0.6087ex2933499080Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1)0 %—31.12.2020
0.4043ex2933520010Malonylurea (barbituric acid) (CAS RN 67-52-7)0 %—31.12.2021
0.7631ex29335400105,5'-(1,2-diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6)0 %—31.12.2023
0.6468ex29335995106-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)0 %—31.12.2024
0.6151ex29335995132-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)0 %—31.12.2023
0.2578ex2933599515Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)0 %—31.12.2023
0.6895ex29335995181-Methyl-3-phenylpiperazine (CAS RN 5271-27-2)0 %—31.12.2020
0.2745ex29335995202,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)0 %—31.12.2023
0.6763ex2933599521N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)0 %—31.12.2020
0.7370ex29335995226-chloro-1,3-dimethyluracil (CAS RN 6972-27-6)0 %—31.12.2022
0.7345ex29335995241-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8)0 %—31.12.2022
0.7392ex29335995265-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524‐64-7)0 %—31.12.2022
0.5912ex29335995272-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)0 %—31.12.2023
0.7810ex29335995286,8-Difluoro-1-(methylamino)-7-(4-methylpiperazin-1-yl)-4-oxo-1,4-dihydroquinoline-3-carboxylic acid (CAS RN 100276-37-7)0 %—31.12.2024
0.3600ex2933599530Mepanipyrim (ISO) (CAS RN 110235-47-7)0 %—31.12.2023
0.6240ex29335995334,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)0 %—31.12.2024
0.6419ex29335995376-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)0 %—31.12.2024
0.4704ex29335995451-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)0 %—31.12.2024
0.6677ex29335995476-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129‐42‐6) with a purity of 94 % or more0 %—31.12.2020
0.4699ex29335995502-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)0 %—31.12.2024
0.6607ex29335995535-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2)0 %—31.12.2020
0.6606ex29335995575,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS RN 13223-43-3)0 %—31.12.2020
0.2744ex29335995602,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)0 %—31.12.2023
0.7578ex29335995631-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0)0 %—31.12.2023
0.4772ex29335995651-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)0 %—31.12.2024
0.7825ex2933599568Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more0 %—31.12.2024
0.2735ex2933599570N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)0 %—31.12.2023
0.5542ex29335995773-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)0 %—31.12.2022
0.7071ex29335995875-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)0 %—31.12.2021
0.6987ex29335995896-Benzyladenine (CAS RN 1214-39-7)0 %—31.12.2021
0.6774ex2933698013Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more0 %—31.12.2020
0.6621ex29336980152-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)0 %—31.12.2020
0.6951ex2933698017Benzoguanamine (CAS RN 91-76-9)0 %—31.12.2020
0.7721ex29336980231,3,5-tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)0 %—31.12.2024
0.7600ex2933698027Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0)0 %—31.12.2023
0.5272ex2933698040Troclosene sodium (INNM) (CAS RN 2893-78-9)0 %—31.12.2021
0.7464ex29336980452-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6)0 %—31.12.2023
0.5131ex2933698055Terbutryn (ISO) (CAS RN 886-50-0)0 %—31.12.2020
0.4957ex2933698060Cyanuric acid (CAS RN 108-80-5)0 %—31.12.2020
0.6127ex29336980651,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)0 %—31.12.2023
0.6477ex2933698075Metamitron (ISO) (CAS RN 41394-05-2)0 %—31.12.2024
0.3882ex2933698080Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)0 %—31.12.2023
0.6960ex2933790015Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)0 %—31.12.2021
0.7346ex2933790025Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)0 %—31.12.2022
0.4294ex29337900305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %—31.12.2022
0.7453ex29337900351-tert-butyl 2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate (CAS RN 108963-96-8)0 %—31.12.2023
0.4524ex29337900506-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)0 %—31.12.2023
0.4985ex2933790070(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate (CAS RN 754186-36-2)0 %—31.12.2020
0.6563ex2933998011Fenbuconazole (ISO) (CAS RN 114369-43-6)0 %—31.12.2024
0.6564ex2933998012Myclobutanil (ISO) (CAS RN 88671-89-0)0 %—31.12.2024
0.5243ex29339980135-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)0 %—31.12.2021
0.6146ex29339980142-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)0 %—31.12.2023
0.2731ex29339980152-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)0 %—31.12.2023
0.6872ex2933998016Pyridate (ISO) (CAS RN 55512-33-9) with a purity by weight of 90 % or more0 %—31.12.2020
0.6933ex2933998017Carfentrazone-ethyl (ISO) (CAS RN 128639-02-1) with a purity by weight of 93 % or more0 %—31.12.2020
0.6567ex29339980192-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)0 %—31.12.2024
0.2732ex29339980202-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)0 %—31.12.2023
0.6829ex29339980211-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)0 %—31.12.2020
0.6244ex2933998023Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more0 %—31.12.2024
0.5625ex29339980241,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)0 %—31.12.2022
0.6833ex2933998026(2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4‐methylbenzenesulfonate (CUS 0143289-9)0 %—31.12.2020
0.6409ex29339980275,6-Dimethylbenzimidazole (CAS RN 582-60-5)0 %—31.12.2024
0.6760ex29339980293-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7)0 %—31.12.2020
0.3593ex2933998030Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)0 %—31.12.2023
0.6775ex2933998031Triadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more0 %—31.12.2020
0.6249ex2933998033Penconazole (ISO) (CAS RN 66246-88-6)0 %—31.12.2024
0.7043ex29339980342,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)0 %—31.12.2021
0.6958ex29339980363-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2)0 %—31.12.2021
0.4695ex29339980378-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)0 %—31.12.2024
0.7045ex2933998038(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)0 %—31.12.2021
0.6961ex2933998039O-(benzotriazol-1-yl)-N,N,N',N'-tetramethyluronium tetrafluoroborate (CAS RN 125700-67-6)0 %—31.12.2021
0.3591ex2933998040trans-4-Hydroxy-L-proline (CAS RN 51-35-4)0 %—31.12.2023
0.7273ex29339980415-[4'-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)0 %—31.12.2022
0.7185ex2933998042(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)0 %—31.12.2021
0.7177ex2933998044(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)0 %—31.12.2021
0.3582ex2933998045Maleic hydrazide (ISO) (CAS RN 123-33-1)0 %—31.12.2023
0.7269ex2933998046(S)-indoline-2-carboxylic acid (CAS RN 79815-20-6)0 %—31.12.2022
0.5818ex2933998047Paclobutrazol (ISO) (CAS RN 76738-62-0)0 %—31.12.2022
0.7410ex29339980485-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)0 %—31.12.2022
0.3580ex2933998050Metconazole (ISO) (CAS RN 125116-23-6)3,2 %—31.12.2023
0.6986ex2933998051Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides0 %—31.12.2021
0.6665ex2933998052N-Boc-trans-4-Hydroxy-L-proline methyl ester (CAS RN 74844‐91-0)0 %—31.12.2020
0.5945ex2933998053Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CAS RN 1441673-92-2)0 %—31.12.2023
0.6599ex29339980543-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)0 %—31.12.2020
0.4585ex2933998055Pyridaben (ISO) (CAS RN 96489-71-3)0 %—31.12.2024
0.7457ex2933998056Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1)0 %—31.12.2023
0.5901ex29339980572-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)0 %—31.12.2023
0.7649ex2933998058Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more0 %—31.12.2023
0.7673ex2933998059Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9)0 %—31.12.2023
0.7624ex2933998061(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1)0 %—31.12.2023
0.7680ex2933998063L-Prolinamide (CAS RN 7531-52-4)0 %—31.12.2023
0.7839ex2933998066(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more0 %—31.12.2024
0.5468ex2933998067Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)0 %—31.12.2021
0.7679ex29339980685-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2',1'-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9)0 %—31.12.2023
0.4384ex293399807110-Methoxyiminostilbene (CAS RN 4698-11-7)0 %—31.12.2023
0.4503ex29339980721,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)0 %—31.12.2023
0.7759ex29339980751-[Bis(dimethylamino)methylene]-1H-benzotriazolium hexafluorophosphate(1-) 3-oxide (CAS RN 94790-37-1)0 %—31.12.2024
0.4382ex29339980783-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)0 %—31.12.2023
0.7814ex2933998079Upadacitinib (INN) (CAS RN 1310726-60-3)0 %—31.12.2024
0.4164ex29339980811,2,3-Benzotriazole (CAS RN 95-14-7)0 %—31.12.2021
0.4165ex2933998082Tolytriazole (CAS RN 29385-43-1)0 %—31.12.2023
0.7803ex29339980832-(2H-Benzotriazol-2-yl)-6-(1-methyl-1-Phenethyl)-4-(1,1,3,3-tetramethylbutyl)phenol (CAS RN 73936-91-1)0 %—31.12.2024
0.3886ex2933998089Carbendazim (ISO) (CAS RN 10605-21-7)0 %—30.06.2020
0.3579ex2934100010Hexythiazox (ISO) (CAS RN 78587-05-0)0 %—31.12.2023
0.5531ex29341000154-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163‐97-3)0 %—31.12.2022
0.2725ex29341000202-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)0 %—31.12.2023
0.5530ex2934100025(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)0 %—31.12.2022
0.5538ex2934100035(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)0 %—31.12.2022
0.6264ex29341000452-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)0 %—31.12.2024
0.4750ex2934100060Fosthiazate (ISO) (CAS RN 98886-44-3)0 %—31.12.2024
0.5232ex29341000803,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)0 %—31.12.2021
0.7312ex2934208015Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)0 %—31.12.2022
0.5252ex29342080302-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)0 %—31.12.2021
0.4346ex29342080251,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one0 %—31.12.2022
0.4955ex2934208060Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)0 %—31.12.2020
0.4910ex2934208070N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)0 %—31.12.2020
0.5537ex29343090102-Methylthiophenothiazine (CAS RN 7643-08-5)0 %—31.12.2022
0.6492ex2934999010Fluralaner (INN) (CAS RN 864731-61-3)0 %—31.12.2024
0.5924ex2934999012Dimethomorph (ISO) (CAS RN 110488-70-5)0 %—31.12.2023
0.3577ex2934999015Carboxin (ISO) (CAS RN 5234-68-4)0 %—31.12.2023
0.6476ex2934999016Difenoconazole (ISO) (CAS RN 119446-68-3)0 %—31.12.2024
0.7843ex2934999017(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more0 %—31.12.2024
0.4715ex2934999020Thiophene (CAS RN 110-02-1)0 %—31.12.2024
0.5263ex2934999023Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)0 %—31.12.2021
0.6241ex2934999024Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more0 %—31.12.2024
0.4942ex29349990252,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)0 %—31.12.2020
0.6252ex29349990264-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)0 %—31.12.2024
0.6362ex29349990272-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)0 %—31.12.2024
0.5242ex293499902811-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)0 %—31.12.2021
0.7837ex2934999029(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more0 %—31.12.2024
0.4700ex2934999030Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)0 %—31.12.2024
0.6744ex2934999031Uridine 5'-diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1)0 %—31.12.2020
0.6743ex2934999032Uridine 5'-diphosphoglucuronic acid trisodium salt (CAS RN 63700-19-6)0 %—31.12.2020
0.7840ex2934999033(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more0 %—31.12.2024
0.6733ex29349990347-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4)0 %—31.12.2020
0.6776ex2934999036Oxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more0 %—31.12.2020
0.5813ex29349990374-Propan-2-ylmorpholine (CAS RN 1004-14-4)0 %—31.12.2022
0.6824ex29349990394-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)0 %—31.12.2020
0.6823ex293499904111-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)0 %—31.12.2020
0.6922ex29349990421-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)0 %—31.12.2024
0.6893ex2934999044Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more0 %—31.12.2020
0.7144ex29349990464-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)0 %—31.12.2021
0.7123ex2934999047Thidiazuron (ISO) (CAS RN 51707-55-2) with a content by weight of 98 % or more0 %—31.12.2021
0.5453ex2934999048Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)0 %—31.12.2021
0.7188ex2934999049Cytidine 5'-(disodium phosphate) (CAS RN 6757-06-8)0 %—31.12.2021
0.4943ex293499905010-[1,1'-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate (CAS RN 591773-92-1)0 %—31.12.2020
0.7259ex2934999052Epoxiconazole (ISO) (CAS RN 133855-98-8)0 %—31.12.2022
0.7146ex29349990534-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)0 %—31.12.2021
0.7311ex29349990542-benzyl-2-dimethylamino-4'-morpholinobutyrophenone (CAS RN 119313-12-1)0 %—31.12.2022
0.7297ex29349990561-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)0 %—31.12.2022
0.7229ex2934999057(6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709‐09-3)0 %—31.12.2022
0.3575ex2934999058Dimethenamide-P (ISO) (CAS RN 163515-14-8)0 %—31.12.2023
0.7387ex2934999059Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)0 %—31.12.2022
0.2718ex2934999060DL-Homocysteine thiolactone hydrochloride (CAS RN 6038‐19‐3)0 %—31.12.2023
0.7459ex29349990615-(1,2-dithiolan-3-yl)valeric acid (CAS RN 1077-28-7)0 %—31.12.2023
0.7536ex2934999062(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 17-acetate (CAS RN 119302-24-8)0 %—31.12.2023
0.7537ex2934999063(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4)0 %—31.12.2023
0.7449ex29349990642-Bromo-5-benzoylthiophene (CAS RN 31161-46-3)0 %—31.12.2023
0.4512ex2934999066Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)0 %—31.12.2023
0.7809ex2934999068Afatinib dimaleate (INNM) (CAS RN 850140-73-7)0 %—31.12.2024
0.7842ex29349990693-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more0 %—31.12.2024
0.7731ex2934999073Tetrahydrouridine (CAS RN 18771-50-1)0 %—31.12.2024
0.4249ex29349990742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %—31.12.2022
0.4052ex2934999075(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971‐95-1)0 %—31.12.2021
0.4058ex29349990ex3204200076102,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)0 %—31.12.2021
0.7579ex2934999078[(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738‐19-7)0 %—31.12.2023
0.4388ex2934999079Thiophen-2-ethanol (CAS RN 5402-55-1)0 %—31.12.2023
0.7657ex29349990802-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4)0 %—31.12.2023
0.4643ex2934999083Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more0 %—31.12.2024
0.4645ex2934999084Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more0 %—31.12.2024
0.5133ex2934999086Dithianon (ISO) (CAS RN 3347-22-6)0 %—31.12.2020
0.5136ex29349990872,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)0 %—31.12.2020
0.7738ex2934999088(7S,9aS)-7-((benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine dioxalate (CAS RN 1268364-46-0)0 %—31.12.2024
0.7815ex2934999089Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385‐59‐7)0 %—31.12.2024
0.6486ex2935909010Florasulam (ISO) (CAS RN 145701-23-1)0 %—31.12.2024
0.3566ex2935909015Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)0 %—31.12.2023
0.3565ex2935909020Toluenesulphonamides0 %—31.12.2023
0.5239ex2935909023N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)0 %—31.12.2021
0.3563ex2935909025Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)0 %—31.12.2023
0.5261ex2935909027Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)0 %—31.12.2021
0.5894ex2935909028N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)0 %—31.12.2023
0.7183ex29359090306-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)0 %—31.12.2021
0.7677ex29359090334-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3)0 %—31.12.2023
0.3564ex2935909035Chlorsulfuron (ISO) (CAS RN 64902-72-3)0 %—31.12.2023
0.7572ex29359090371,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2)0 %—31.12.2023
0.7438ex2935909040Venetoclax (INN) (CAS 1257044-40-8)0 %—31.12.2022
0.5036ex2935909042Penoxsulam (ISO) (CAS RN 219714-96-2)0 %—31.12.2020
0.6370ex2935909043Oryzalin (ISO) (CAS RN 19044-88-3)0 %—31.12.2024
0.3562ex2935909045Rimsulfuron (ISO) (CAS RN 122931-48-0)0 %—31.12.2023
0.6242ex2935909047Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more0 %—31.12.2024
0.5451ex2935909048(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)0 %—31.12.2021
0.2843ex29359090504,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)0 %—31.12.2023
0.6834ex2935909052(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2)0 %—31.12.2020
0.4636ex29359090532,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)0 %—31.12.2024
0.6777ex2935909054Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more0 %—31.12.2020
0.3560ex2935909055Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)0 %—31.12.2023
0.6802ex2935909056N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)0 %—31.12.2020
0.6903ex2935909057N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)0 %—31.12.2020
0.6811ex29359090581-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8)0 %—31.12.2020
0.6664ex2935909059Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more0 %—31.12.2020
0.7676ex29359090604-[(3-Methylphenyl)amino]pyridine-3-sulfonamide (CAS RN 72811-73-5)0 %—31.12.2023
0.4586ex2935909063Nicosulphuron (ISO) (CAS RN 111991-09-4) of a purity by weight of 91 % or more0 %—31.12.2024
0.3561ex2935909065Tribenuron-methyl (ISO) (CAS RN 101200-48-0)0 %—31.12.2023
0.6959ex2935909067N-(2-phenoxyphenyl)methanesulphonamide (CAS RN 51765‐51‐6)0 %—31.12.2021
0.7854ex2935909070(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more0 %—31.12.2024
0.5539ex2935909073(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)0 %—31.12.2022
0.3559ex2935909075Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)0 %—31.12.2023
0.2844ex2935909085N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride0 %—31.12.2024
0.3704ex2935909088N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)0 %—31.12.2023
0.4048ex29359090893-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)0 %—31.12.2021
0.4944ex2938903010Ammonium glycyrrhizate (CAS RN 53956-04-0)0 %—31.12.2020
0.3554ex2938909010Hesperidin (CAS RN 520-26-3)0 %—31.12.2023
0.5927ex2938909020Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)0 %—31.12.2023
0.7329ex2938909030Rebaudioside A (CAS RN 58543-16-1)0 %—31.12.2022
0.7327ex2938909040Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages0 %—31.12.2022
0.7047ex2940000030D(+)- Trehalose dihydrate (CAS RN 6138-23-4)0 %—31.12.2021
0.7757ex29400000502,3,4,6-Tetrakis-O-(phenylmethyl)-D-galactopyranose (CAS RN 6386-24-9)0 %—31.12.2024
0.5233ex2941203010Dihydrostreptomycin sulphate (CAS RN 5490-27-7)0 %—31.12.2021
0.6984ex2942000010Sodium triacetoxyborohydride (CAS RN 56553-60-7)0 %—31.12.2021
0.355532012000Wattle extract0 %—31.12.2023
0.3553ex3201909020Tanning extracts derived from gambier and myrobalan fruits0 %—31.12.2023
0.6600ex32019090ex320290004010Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)0 %—31.12.2020
0.6183ex3204110015Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight0 %—31.12.2023
0.5091ex3204110020Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight0 %—31.12.2020
0.6277ex3204110025N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)0 %—31.12.2024
0.7307ex3204110035Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 of 50 % or more by weight0 %—31.12.2022
0.5235ex3204110040Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight0 %—31.12.2021
0.5134ex3204110045Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)0 %—31.12.2020
0.5264ex3204110050Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight0 %—31.12.2021
0.5236ex3204110060Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight0 %—31.12.2021
0.5440ex3204120010Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight0 %—31.12.2021
0.6972ex3204120015Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight0 %—31.12.2021
0.6975ex3204120017Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181‐77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight0 %—31.12.2021
0.7021ex3204120025Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576‐15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight0 %—31.12.2021
0.6976ex3204120027Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight0 %—31.12.2021
0.6963ex3204120035Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight0 %—31.12.2021
0.6964ex3204120037Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792‐73‐6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight0 %—31.12.2021
0.5925ex3204120040Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)0 %—31.12.2023
0.6965ex3204120045Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight0 %—31.12.2021
0.6971ex3204120047Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269‐87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight0 %—31.12.2021
0.6973ex3204120055Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight0 %—31.12.2021
0.6974ex3204120057Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219‐65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight0 %—31.12.2021
0.6535ex3204120060Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight0 %—31.12.2024
0.6977ex3204120065Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight0 %—31.12.2021
0.6652ex3204120070Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight0 %—31.12.2020
0.4065ex3204130010Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight0 %—31.12.2021
0.7394ex3204130015Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight0 %—31.12.2022
0.7395ex3204130025Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight0 %—31.12.2022
0.5804ex3204130030Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight0 %—31.12.2023
0.7396ex3204130035Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 50 % or more by weight0 %—31.12.2022
0.5805ex3204130040Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight0 %—31.12.2022
0.7398ex3204130045Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 40 % or more by weight0 %—31.12.2022
0.6474ex3204130050Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight0 %—31.12.2024
0.7775ex3204130055Colourant C.I. Basic Violet 16 (CAS RN 6359-45-1) and preparations based thereon with a colourant C.I. Basic Violet 16 content of 60 % or more by weight0 %—31.12.2024
0.6475ex3204130060Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight0 %—31.12.2024
0.7776ex3204130065Colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and preparations based thereon with a colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) content of 50 % or more but not more than 80 % by weight0 %—31.12.2024
0.7777ex3204130070Mixture of the colourants C.I. Basic Yellow 28 (CAS RN 54060‐92-3), C.I. Basic Red 46 (CAS RN 12221-69-1) and C.I. Basic Blue 159 (CAS RN 105953-73-9) and preparations based thereon with a content of colourants C.I. Basic Yellow 28, C.I. Basic Red 46 and C.I. Basic Blue 159 taken together of 60 % or more by weight0 %—31.12.2024
0.7778ex3204130075Colourant C.I. Basic Red 18:1 (CAS RN 12271-12-4) and preparations based thereon with a content of 40 % or more by weight0 %—31.12.2024
0.7779ex3204130080Colourant C.I. Basic Yellow (CAS RN 83949-75-1) and preparations based thereon with a content of 40 % or more by weight0 %—31.12.2024
0.6569ex3204140010Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight0 %—31.12.2024
0.6570ex3204140020Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight0 %—31.12.2024
0.6571ex3204140030C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight0 %—31.12.2024
0.6978ex3204140040Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) and preparations based thereon with a colourant C.I. Direct Black 168 content by weight of 75 % or more, in powder form for leather dyeing0 %—31.12.2021
0.7885ex3204150020Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight0 %—31.12.2024
0.3997ex3204150060Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight0 %—31.12.2023
0.6129ex3204150070Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)0 %—31.12.2023
0.6325ex3204160030Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:Colourant Reactive Yellow 201 (CAS RN 27624-67-5),1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)0 %—31.12.2024
0.7367ex3204160040Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0)with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, andcontaining a preservative0 %—31.12.2022
0.2517ex3204170010Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight0 %—31.12.2023
0.5433ex3204170015Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight0 %—31.12.2021
0.6918ex3204170016Colourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Pigment Red 49:2 content of 60 % or more by weight0 %—31.12.2020
0.7092ex3204170018Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight0 %—31.12.2021
0.6130ex3204170019Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight0 %—31.12.2023
0.5505ex3204170020Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight0 %—31.12.2021
0.6279ex3204170021Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight0 %—31.12.2024
0.5259ex3204170022Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight0 %—31.12.2021
0.6246ex3204170023Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)0 %—31.12.2024
0.6453ex3204170024Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight0 %—31.12.2023
0.5427ex3204170025Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight0 %—31.12.2021
0.7261ex3204170026Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight0 %—31.12.2022
0.7391ex3204170029Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight0 %—31.12.2022
0.7659ex3204170031Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight0 %—31.12.2023
0.6603ex3204170033Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight0 %—31.12.2020
0.5426ex3204170035Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight0 %—31.12.2021
0.7565ex3204170037Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight0 %—31.12.2023
0.4630ex3204170040Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight0 %—31.12.2024
0.6452ex3204170045Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight0 %—31.12.2023
0.5299ex3204170065Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight0 %—31.12.2021
0.5832ex3204170075Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight0 %—31.12.2022
0.5645ex3204170080Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight0 %—31.12.2022
0.5700ex3204170085Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight0 %—31.12.2022
0.5680ex3204170088Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight0 %—31.12.2022
0.6979ex3204190013Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight0 %—31.12.2021
0.6406ex3204190014Red colourant preparation, in a form of wet paste, containing by weight:35 % or more but not more than 40 % of 1‐[[4‐(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1),not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9),not more than 3 % of 1‐[(2‐methylphenyl)azo]naphthalen-2-ol (CAS RN 2646‐17‐5),55 % or more but not more than 65 % of water0 %—31.12.2024
0.7262ex3204190016Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight0 %—31.12.2022
0.5103ex3204190071Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight0 %—31.12.2020
0.5100ex3204190073Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight0 %—31.12.2020
0.5282ex3204190077Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight0 %—31.12.2021
0.5671ex3204190084Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight0 %—31.12.2022
0.5395ex3204200030Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight0 %—31.12.2021
0.6473ex3204900010Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight0 %—31.12.2024
0.7326ex3204900020Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % of a colourant C.I. Solvent Red 1750 %—31.12.2022
0.3707ex3205000010Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry0 %—31.12.2023
0.7658ex3205000020Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2),65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)0 %—31.12.2023
0.7699ex3205000030Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1),65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)0 %—31.12.2023
0.3550ex3206110010Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate0 %—31.12.2023
0.5378ex3206190010Preparation containing by weight:72 % (± 2 %) of mica (CAS RN 12001-26-2), and28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)0 %—31.12.2021
0.3551ex3206420010Lithopone (CAS RN 1345-05-7)0 %—31.12.2023
0.6245ex3206497020Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)0 %—31.12.2024
0.7305ex3206497030Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a C.I. Pigment Black 12 content of 50 % or more by weight0 %—31.12.2022
0.7390ex3206497040Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight0 %—31.12.2022
0.367332065000Inorganic products of a kind used as luminophores0 %—31.12.2023
0.6233ex3207300020Printing paste containing:30 % by weight or more, but not more than 50 % of silver, and8 % by weight or more, but not more than 17 % of palladium0 %—31.12.2024
0.5830ex3207408540Glass flakes (CAS RN 65997-17-3):of a thickness of 0,3 μm or more but not more than 10 μm, andcoated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)0 %—31.12.2022
0.6727ex3208101010Thermoplastic polyester copolymer resin with a solid content of 30 % or more but not more than 50 %, in organic solvents0 %—31.12.2020
0.2511ex3208201010Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer0 %—31.12.2023
0.4511ex3208201020Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether0 %—31.12.2023
0.3967ex3208901915Chlorinated polyolefins, in a solution0 %—31.12.2023
0.5564ex32089019ex390469802589Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight0 %—31.12.2022
0.2504ex3208901940Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane0 %—31.12.2023
0.6154ex32089019ex382499924563Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate0 %—31.12.2023
0.6989ex3208901947Solution containing by weight:0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents,75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569‐02‐4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)0 %—31.12.2021
0.2502ex3208901950Solution containing by weight:(65 ± 10) % of γ-butyrolactone,(30 ± 10) % of polyamide resin,(3,5 ±1,5) % of naphthoquinone ester derivative, and(1,5 ±0,5) % of arylsilicic acid0 %—31.12.2023
0.6726ex3208901955Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent0 %—31.12.2020
0.4037ex3208901960Copolymer of hydroxystyrene with one or more of the following:Styrene,Alkoxystyrene,Alkylacrylates,dissolved in ethyl lactate0 %—31.12.2021
0.6005ex3208901965Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants0 %—31.12.2024
0.4301ex3208901975Acenaphthalene copolymer in ethyl lactate solution0 %—31.12.2022
0.3662ex32151100ex321519001010Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments0 %—31.12.2023
0.5777ex3215190020Ink:consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),with a total solid content by weight of 55 % or more, but not more than 57 %, andwith a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,for use in the manufacture of electrodes0 %l31.12.2022
0.2506ex3215907010Ink formulation, for use in the manufacture of ink-jet cartridges0 %—31.12.2023
0.2501ex3215907020Heat sensitive ink fixed on a plastic film0 %—31.12.2023
0.4533ex3215907030Disposable cartridge ink, containing by weight:1 % or more, but not more than 10 % of amorphous silicon dioxide, or3,8 % or more of dye C.I. Solvent Black 7 in organic solvents,for use in the marking of integrated circuits0 %—31.12.2023
0.5031ex3215907040Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:wax,a vinyl-based polymer, anda colouring agent,for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices0 %—31.12.2020
0.366133011210Essential oil of orange, not deterpenated0 %—31.12.2023
0.4863ex3402119010Sodium lauroyl methyl isethionate0 %—31.12.2020
0.4002ex3402130010Vinyl copolymer surface active agent based on polypropylene glycol0 %—31.12.2023
0.4277ex3402130020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %—31.12.2022
0.6285ex3402901010Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides0 %—31.12.2024
0.3660ex3402901020Mixture of docusate sodium (INN) and sodium benzoate0 %—31.12.2023
0.4935ex3402901030Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1)0 %—31.12.2020
0.4939ex3402901050Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)0 %—31.12.2020
0.4675ex3402901060Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane0 %—31.12.2020
0.4676ex3402901070Surface-active preparation, containing ethoxylated 2,4,7,9‐tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)0 %—31.12.2024
0.7508ex3501909010Non edible sodium caseinate (CAS RN 9005-46-3) in the form of powder with a protein content of more than 88 % by weight for use in the production of thermoplastic granules0 %—31.12.2023
0.2498ex3506919010Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)0 %—31.12.2023
0.4003ex3506919030Two component microencapsulated epoxy adhesive dispersed in a solvent0 %—31.12.2023
0.4313ex3506919040Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)0 %—31.12.2024
0.6725ex3506919050Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,dissolved in:Methyl ethyl ketone (CAS RN 78-93-3),Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)0 %—31.12.2020
0.7268ex3506919060Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989‐27‐5) with a polymeric content by weight of 25 % or more but not more than 35 %0 %l31.12.2022
0.7267ex3506919070Temporary wafer-bonding release in the form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight0 %l31.12.2022
0.6293ex3507909010Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products0 %—31.12.2024
0.6798ex3507909020Creatine amidinohydrolase (CAS RN 37340-58-2)0 %—31.12.2020
0.7050ex3507909030Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with:an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml,a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 %, anda pH value of 6,5 or more, but not more than 8,50 %—31.12.2021
0.4922ex3601000010Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators0 %—31.12.2021
0.7318ex3603006010Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 29,4 mm and a pin length of 6,68 mm (±0,3 mm) or more but not more than 7,54 mm (±0,3 mm)0 %—31.12.2022
0.3650ex3707100010Photosensitive emulsion for the sensitization of silicon discs0 %—31.12.2023
0.3894ex3707100015Sensitising emulsion consisting of:by weight not more than 12 % of diazooxonaphthalenesulphonic acid ester,phenolic resins,in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone0 %—31.12.2023
0.3895ex3707100025Sensitising emulsion containing:phenolic or acrylic resins,a maximum 2 % by weight of light sensitive acid precursor,in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate0 %—31.12.2023
0.4004ex3707100030Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate0 %—31.12.2023
0.4039ex3707100035Sensitising emulsion or preparation containing one or more of:acrylate polymers,methacrylate polymers,derivatives of styrene polymers,containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2‐methoxy-1-methylethyl acetate0 %—31.12.2021
0.4177ex3707100040Sensitising emulsion, containing:not more than 10 % by weight of naphthoquinonediazide esters,2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene,not more than 7 % by weight of epoxy-containing derivatives,dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate0 %—31.12.2021
0.4647ex3707100045Photosensitive emulsion consisting of cyclized polyisoprene containing:55 % or more but not more than 75 % by weight of xylene, and12 % or more but not more than 18 % by weight of ethylbenzene0 %—31.12.2024
0.4648ex3707100050Photosensitive emulsion containing by weight:20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,5 % or more but not more than 30 % of acrylates,not more than 12 % of a photoinitiator0 %—31.12.2024
0.5929ex3707100055Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N‐ethyl‐2‐pyrrolidone with a polymer content by weight 10 % or more0 %—31.12.2023
0.7338ex3707100060Sensitising emulsion, containing by weight:not more than 5 % of photoacid generator,2 % or more but not more than 50 % of phenolic resins, andnot more than 7 % of epoxy-containing derivatives,dissolved in heptan-2-one and/or ethyllactate0 %—31.12.2022
0.5465ex3801900010Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777‐87-6)0 %—31.12.2021
0.6759ex3802100010Mixture of activated carbon and polyethylene, in form of powder0 %—31.12.2020
0.7368ex3802100020Chemically activated carbon in granular form with a Butane Working Capacity of 11 g butane/100 ml or more (as determined by the ASTM D 5228 method) used for vapour absorption and desorption in emission control canisters of motor vehicles0 %—31.12.2022
0.7441ex3802100030Chemically activated carbon in pellet (cylindrical) form, with:a diameter of 2 mm or more but not more than 3 mm, anda Butane Working Capacity of 5 g butane/100ml or more (as determined by the ASTM D 5228 method),used for vapour absorption and desorption in emission control canisters of motor vehicles0 %—31.12.2021
0.298738059010Pine oil1,7 %—31.12.2023
0.2990ex3808919010Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide0 %—31.12.2023
0.2988ex3808919030Preparation containing endospores or spores and protein crystals derived from either:Bacillus thuringiensis Berliner subsp. aizawai and kurstaki, orBacillusthuringiensis subsp. kurstaki, orBacillusthuringiensis subsp. israelensis, orBacillusthuringiensis subsp. aizawai, orBacillusthuringiensis subsp. tenebrionis0 %—31.12.2024
0.2983ex3808919040Spinosad (ISO)0 %—31.12.2023
0.5710ex3808919060Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn J) and (3'‐ethoxy-spinosyn L)0 %—31.12.2022
0.6874ex3808923010Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more0 %—31.12.2020
0.2986ex3808929010Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale0 %—31.12.2023
0.2984ex3808929030Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:24 % or more but not more than 26 % of pyrithione zinc (INN), or39 % or more but not more than 41 % of pyrithione zinc (INN)0 %—31.12.2023
0.4843ex3808929050Preparations based on copper pyrithione (CAS RN 14915-37-8)0 %—31.12.2024
0.4751ex3808932310Herbicide containing flazasulfuron (ISO) as an active ingredient0 %—31.12.2024
0.5137ex3808932740Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight:30 % or more of tepraloxydim (ISO), andnot more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons0 %—31.12.2021
0.4753ex3808939010Preparation, in the form of granules, containing by weight:38,8 % or more but not more than 41,2 % of Gibberellin A3, or9,5 % or more but not more than 10,5 % of Gibberellin A4 and A70 %—31.12.2024
0.5048ex3808939020Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine,of a kind used in plant growth regulators0 %—31.12.2020
0.5030ex3808939030Aqueous solution containing by weight:1,8 % of sodium para-nitrophenolate,1,2 % of sodium ortho-nitrophenolate,0,6 % of sodium 5-nitroguaiacolate,for use in the manufacture of a plant growth regulator0 %—31.12.2020
0.5039ex3808939040Mixed white powder containing by weight:3 % or more but not more than 3,6 % of 1‐methylcyclopropene with a purity more than 96 %, andcontaining less than 0,05 % of each impurity of 1‐chloro-2-methylpropene and 3‐chloro‐2‐methylpropene,for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator0 %—31.12.2020
0.5088ex3808939050Preparation in the form of powder, containing by weight:55 % or more of Gibberellin A4,1 % or more but not more than 35 % of Gibberellin A7,90 % or more of Gibberellin A4 and Gibberellin A7 combined,not more than 10 % of a combination of water and other naturally occurring Gibberellins,of a kind used in plant growth regulators0 %—31.12.2020
0.7413ex3808939060Preparation in the form of tablets containing by weight:0,55 % or more but not more than 2,50 % of 1‐methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, andless than 0,05 % of each of the two impurities, 1‐chloro‐2-methylpropene (CAS RN 513-37-1) and 3‐chloro‐2‐methylpropene (CAS RN 563-47-3),for coating0 %—31.12.2022
0.6532ex3808942030Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)0 %—31.12.2024
0.4920ex3808999010Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water0 %—31.12.2020
0.6000ex3808999020Abamectin (ISO) (CAS RN 71751-41-2)0 %—31.12.2023
0.2557ex3809910010Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate0 %—31.12.2023
0.4406ex3810100010Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:70 % or more, but not more than 90 % of tin,not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium,for use in the electro technical industry0 %—31.12.2023
0.4510ex3811190010Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:4,9 % of 1,2,4-trimethyl-benzene,4,9 % of naphthalene, and0,5 % of 1,3,5-trimethyl-benzene0 %—31.12.2024
0.3448ex3811210010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0 %—31.12.2023
0.7223ex3811210011Dispersing agent and oxidation inhibitor containing:o-amino polyisobutylenephenol (CAS RN 78330-13-9),more than 30 % by weight but not more than 50 % by weight of mineral oils,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2021
0.6904ex3811210012Dispersing agent containing:esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),35 % or more but not more than 55 % by weight of mineral oils, andwith a chlorine content of not more than 0,05 % by weight,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
0.6018ex3811210013Additives containing:borated magnesium (C16-C24) alkylbenzene sulphonates, andmineral oils,having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils0 %—31.12.2024
0.6906ex3811210014Dispersing agent:containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),containing 35 % or more but not more than 55 % by weight of mineral oils,with a chlorine content by weight of not more than 0,05 %,having a total base number of less than 15,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
0.6907ex3811210016Detergent containing:Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol),40 % or more but not more than 60 % by weight of mineral oils, andhaving a total base number more than 120,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
0.6905ex3811210018Detergent containing:long chain alkyltoluene calcium sulphonates,more than 30 % but not more than 50 % by weight of mineral oils, andhaving a total base number of more than 310 but not more than 340,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
0.6430ex3811210019Additives containing:a polyisobutylene succinimide based mixture, andmore than 30 % but not more than 50 % by weight of mineral oils,having a total base number of more than 40, for use in the manufacture of lubricating oils0 %—31.12.2024
0.3449ex3811210020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil0 %—31.12.2023
0.6012ex3811210025Additives containing:a (C8-18) alkyl polymethacrylate copolymer with N‐[3‐(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10000 but not more than 20000, andmore than 15 %, but not more than 30 % by weight of mineral oils,for use in the manufacture of lubricating oils0 %—31.12.2024
0.6022ex3811210027Additives containing:10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, andmineral oils,for use in the manufacture of lubricating oils0 %—31.12.2024
0.5717ex3811210030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
0.6013ex3811210033Additives containing:calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), andmineral oils,having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils0 %—31.12.2024
0.6016ex3811210037Additives containing:a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, andmore than 50 % but not more than 75 % by weight of mineral oils,for use in the manufacture of lubricating oils0 %—31.12.2024
0.6435ex3811210048Additives containingoverbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9), andby weight more than 25 % but not more than 50 % of mineral oils,having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils0 %—31.12.2024
0.5727ex3811210050Additives for lubricating oils,based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),containing mineral oils,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
0.6437ex3811210053Additives containing:overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 %, andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils0 %—31.12.2024
0.6434ex3811210055Additives containing:low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils0 %—31.12.2024
0.5724ex3811210060Additives for lubricating oils, containing mineral oils:based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
0.6431ex3811210063Additives containing:an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 %, andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils0 %—31.12.2024
0.6429ex3811210065Additives containing:a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), andmore than 35 % but not more than 50 % by weight of mineral oils,having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils0 %—31.12.2024
0.5711ex3811210070Additives for lubricating oils:containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605‐20‐9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
0.6017ex3811210073Additives containing:borated succinimide compounds (CAS RN 134758‐95‐5),mineral oils, andhaving a total base number (TBN) greater than 40,for use in the manufacture of additive mixtures for lubricating oils0 %—31.12.2023
0.6671ex3811210075Additives containing:Calcium (C10-C14) dialkylbenzenesulfonates,more than 40 %, but not more than 60 % by weight of mineral oils,with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
0.6669ex3811210077Antifoam additives consisting of:a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, andmore than 50 % but not more than 80 % by weight of mineral oils,for use in the manufacture of additive blends for lubricating oils0 %—31.12.2020
0.6666ex3811210080Additives containing:polyisobutylene aromatic polyamine succinimide,more than 40 % but not more than 60 % by weight of mineral oils,with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils0 %—31.12.2020
0.6498ex3811210083Additives containing:polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),more than 31,9 % but not more than 43,3 % by weight of mineral oils,not more than 0,05 % by weight chlorine, andhaving a total base number (TBN) greater than 20,for use in the manufacture of additives blends for lubricating oils0 %—31.12.2024
0.5718ex3811210085Additives:containing more than 20 % or more but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,for use in the manufacture of blends of additives0 %—31.12.2022
0.6438ex3811290015Additives containing:products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9), andmore than 15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent,for use in the manufacture of lubricating oils0 %—31.12.2024
0.7512ex3811290018Additives consisting of dihydroxy butanedioic acid – (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils0 %—31.12.2023
0.5721ex3811290020Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2022
0.6432ex3811290025Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils or greases0 %—31.12.2024
0.5723ex3811290030Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
0.6433ex3811290035Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils0 %—31.12.2024
0.5728ex3811290040Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2022
0.6436ex3811290045Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils0 %—31.12.2024
0.5719ex3811290050Additives for lubricating oils, consisting of a mixture of N,N‐dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
0.6668ex3811290065Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
0.6020ex3811290070Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils0 %—31.12.2024
0.7205ex3811290075Oxidation inhibitor mainly containing a mixture of isomers of 1‐(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils0 %—31.12.2021
0.6021ex3811290080Additives containing:more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), andmore than 15 % by weight of 5-(tert-nonyldithio)-1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),for use in the manufacture of lubricating oils0 %—31.12.2024
0.6023ex3811290085Additives consisting of a mixture of 3‐((C9‐11)‐isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10‐rich (CAS RN 398141‐87-2), for use in the manufacture of lubricating oils0 %—31.12.2024
0.3730ex3811900010Dinonylnaphthylsulphonic acid salt, in a mineral oil solution0 %—31.12.2023
0.5565ex3811900040Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol0 %—31.12.2022
0.7204ex3811900050Corrosion inhibitor containing:polyisobutenyl succinic acid, andmore than 5 % and not more than 20 % by weight of mineral oils,for use in the manufacture of blends of additives for fuels0 %—31.12.2021
0.5147ex3812100010Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)0 %—31.12.2021
0.6045ex3812209010Plasticiser, containing:bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2),more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)0 %—31.12.2023
0.3444ex3812399020Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate0 %—31.12.2023
0.6055ex3812399025UV photo stabiliser containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2),α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1),polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3),bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), andmethyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)0 %—31.12.2023
0.3446ex3812399030Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol0 %—31.12.2024
0.6054ex3812399035Mixture containing by weight:25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403‐32-9),not more than 20 % of other organic compounds,on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)0 %—31.12.2023
0.4861ex3812399040Mixture of:80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), and20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3)0 %—31.12.2023
0.5477ex3812399055UV-stabilizer, containing:2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6), andeither N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), orN,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)0 %—31.12.2021
0.5483ex3812399065Stabiliser for plastic material containing:2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)0 %—31.12.2021
0.5372ex3812399070Light stabiliser containing:branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and1-methoxy-2-propyl acetate (CAS RN 108-65-6)0 %—31.12.2021
0.5822ex3812399080UV-stabilizer, consisting of:a hindered amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), andeither an o-hydroxyphenyl triazine UV light absorber, ora chemically modified phenolic compound0 %—31.12.2022
0.3441ex3814009020Mixture containing by weight:69 % or more but not more than 71 % of 1‐methoxypropan-2-ol (CAS RN 107-98-2),29 % or more but not more than 31 % of 2‐methoxy‐1‐methylethyl acetate (CAS RN 108-65-6)0 %—31.12.2023
0.3731ex3814009040Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether0 %—31.12.2023
0.2800ex3815120010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver0 %—31.12.2023
0.7574ex3815120020Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with:a diameter of 1,4 mm or more but not more than 2,0 mm, anda platinum content by weight of 0,2 % or more but not more than 0,5 %0 %—31.12.2023
0.7585ex3815120030Catalyst:containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals,deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide,the honeycomb structure having:a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight,62 cells per cm2 or more, but not more than 140 cells per cm2,a diameter of 100 mm or more, but not more than 120 mm, anda length of 60 mm or more, but not more than 150 mm,for use in the production of motor vehicles0 %—31.12.2023
0.5508ex3815199010Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)0 %—31.12.2021
0.7064ex3815199013Catalyst consisting of:chromium trioxide (CAS RN 1333-82-0),dichromium trioxide (CAS RN 1308-38-9),on a support of aluminium oxide (CAS RN 1344-28-1)0 %—31.12.2021
0.2799ex3815199015Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile0 %—31.12.2023
0.2798ex3815199020Catalyst:in the form of solid spheres,of a diameter of 4 mm or more but not more than 12 mm, andconsisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,for use in the manufacture of acrylic acid0 %—31.12.2023
0.6049ex3815199025Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde0 %—31.12.2023
0.3435ex3815199030Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene0 %—31.12.2023
0.7566ex3815199035Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a support of silicon dioxide in the form of a powder0 %—31.12.2023
0.2792ex3815199065Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide0 %—31.12.2023
0.2791ex3815199070Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide0 %—31.12.2023
0.2790ex3815199075Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide0 %—31.12.2023
0.2793ex3815199080Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil0 %—31.12.2023
0.2788ex3815199085Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder0 %—31.12.2023
0.3899ex3815199086Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins0 %—31.12.2023
0.4005ex3815909016Initiator based on dimethylaminopropyl urea0 %—31.12.2022
0.5704ex3815909018Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO')-, di[chloride(1-)] (CAS RN 1217890-37-3), used to accelerate chemical oxidation or bleaching0 %—31.12.2022
0.7528ex3815909025Catalyst consisting by weight of:30 % or more but not more than 33 % of bis(4‐(diphenylsulphonio)phenyl)sulphide bis(hexafluorophosphate) (CAS RN 74227-35-3), and24 % or more but not more than 27 % of diphenyl(4‐phenylthio)phenylsuphonium hexafluorophosphate (CAS RN 68156-13-8),in propylene carbonate (CAS RN 108-32-7)0 %—31.12.2023
0.5062ex3815909030Catalyst, consisting of a suspension in mineral oil of:tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, andsilicon dioxide,containing 6,6 % (±0,6 %) by weight of magnesium, andcontaining 2,3 % (±0,2 %) by weight of titanium0 %—31.12.2020
0.7526ex3815909035Catalyst containing by weight:25 % or more but not more than 27,5 % of bis[4‐(diphenylsuphonio)phenyl]sulphide bis(hexafluoroantimonate) (CAS RN 89452-37-9), and20 % or more but not more than 22,5 % of diphenyl(4‐phenylthio)phenylsufonium hexafluoroantimonate (CAS RN 71449-78-0),in propylene carbonate (CAS RN 108-32-7)0 %—31.12.2023
0.6006ex3815909040Catalyst:containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm,for use in the manufacture of acrylic acid0 %—31.12.2023
0.7243ex3815909043Catalyst in powder form consisting by weight of:92,50 % (± 2) % titanium dioxide (CAS RN 13463‐67‐7),5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and2,5 % (±1,5) % sulphur trioxide (CAS RN 7446-11-9)0 %—31.12.2022
0.3433ex3815909050Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium0 %—31.12.2023
0.2783ex3815909080Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol0 %—31.12.2020
0.3430ex3815909081Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2‐ethylhexanoate0 %—31.12.2023
0.2782ex3815909085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins0 %—31.12.2022
0.2909ex3815909086Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide0 %—31.12.2023
0.3732ex3815909088Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:4 % or more but not more than 10 % of titanium, and10 % or more but not more than 20 % magnesium0 %—31.12.2023
0.3733ex3815909089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile0 %—31.12.2021
0.4408ex3817005010Mixture of alkylbenzenes (C14-26) containing by weight:35 % or more but not more than 60 % of eicosylbenzene,25 % or more but not more than 50 % of docosylbenzene,5 % or more but not more than 25 % of tetracosylbenzene0 %—31.12.2023
0.3427ex3817008010Mixture of alkylnaphthalenes, containing by weight:88 % or more but not more than 98 % of hexadecylnaphthalene2 % or more but not more than 12 % of dihexadecylnaphthalene0 %—31.12.2023
0.4581ex3817008020Mixture of branched alkyl benzenes mainly containing dodecyl benzenes0 %—31.12.2023
0.5479ex3817008030Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms0 %—31.12.2021
0.4006ex3819000020Fire resistant hydraulic fluid based on phosphate ester0 %—31.12.2023
0.7922ex382319102012-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters0 %—31.12.2024
0.6038ex38231930ex382319302030Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 23090 %—31.12.2023
0.6037ex38231990ex382319902030Palm acid oils from refining for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 23090 %—31.12.2023
0.7756ex3824789005Mixture of halogenated derivatives containing by weight:30 % or more but not more than 60 % of difluoromethane (CAS RN 75-10-5),30 % or more but not more than 60 % of trifluoroiodomethane (CAS RN 2314-97-8),10 % or more but not more than 30 % of pentafluoroethane (CAS RN 354-33-6)0 %—31.12.2024
0.2908ex3824991510Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets0 %—31.12.2023
0.6810ex3824999223Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol0 %—31.12.2020
0.7222ex3824999225Preparation containing by weight:25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8),25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1),10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0),1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6),1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8),not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)3,2 %—31.12.2020
0.7321ex3824999226Preparation containing by weight:60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742‐94-5),15 % or more but not more than 25 % of 4‐(4‐nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and10 % or more but not more than 15 % of 2‐sec‐butylphenol (CAS RN 89-72-5)0 %—31.12.2022
0.7224ex38249992274-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent0 %—31.12.2021
0.6778ex3824999228Aqueous solution containing by weight:10 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),10 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9), and0,5 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)0 %—31.12.2020
0.4909ex3824999229Preparation containing by weight:85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate0 %—31.12.2020
0.7215ex3824999230Aqueous solution of caesium formate and potassium formate containing by weight:1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), andwhether or not containing not more than 9 % of additives0 %—31.12.2021
0.7618ex3824999231Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules0 %—31.12.2023
0.4707ex3824999232Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)0 %—31.12.2024
0.3083ex38249992ex38249993ex38249996334040Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:on a support of mineral wax, whether or not modified chemically, orin the form of a solution in an organic solvent0 %—31.12.2023
0.4153ex3824999235Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate0 %—31.12.2023
0.4083ex3824999236Calcium phosphonate phenate, dissolved in mineral oil0 %—31.12.2021
0.4523ex3824999237Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085‐02-4)0 %—31.12.2023
0.7722ex3824999238Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)0 %—31.12.2024
0.4152ex3824999239Preparation containing not less than 47 % by weight of 1,3:2,4‐bis-O-benzylidene-D-glucitol0 %—31.12.2023
0.6779ex3824999240Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent0 %—31.12.2020
0.6091ex3824999242Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene0 %—31.12.2023
0.7724ex3824999243Preparation containing by weight:65 % or more, but not more than 95 % of isopropylated triaryl phosphate (CAS RN 68937-41-7), and5 % or more, but not more than 35 % of triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2024
0.3067ex3824999245Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors0 %—31.12.2023
0.6068ex3824999246Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran0 %—31.12.2020
0.5475ex3824999247Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2), andtrihexylphosphine oxide (CAS RN 3084-48-8)0 %—31.12.2022
0.4279ex3824999249Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)0 %—31.12.2022
0.4292ex3824999250Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses0 %—31.12.2022
0.3065ex3824999251Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid0 %—31.12.2023
0.7742ex3824999252Electrolyte containing:5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6 ) and/or ethyl methyl carbonate (CAS RN 623-53-0),0,5 % or more but not more than 20 % 1,3,2‐dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),for use in the manufacture of motor vehicle batteries3,2 %—31.12.2020
0.3061ex3824999253Preparations consisting predominantly of ethylene glycol and:either diethylene glycol, dodecanedioic acid and ammonia water,or N,N-dimethylformamide,or γ-butyrolactone,or silicon oxide,or ammonium hydrogen azelate,or ammonium hydrogen azelate and silicon oxide,or dodecanedioic acid, ammonia water and silicon oxide,for the manufacture of electrolytic capacitors0 %—31.12.2023
0.4434ex3824999254Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)0 %—31.12.2021
0.6025ex3824999255Additives for paints and coatings, containing:a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4‐(1,1‐dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and30 % or more but not more than 35 % by weight of isobutyl alcohol0 %—31.12.2023
0.4431ex3824999256Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units0 %—31.12.2024
0.4425ex3824999257Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units0 %—31.12.2024
0.6067ex3824999259Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran0 %—31.12.2023
0.5043ex3824999260N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %0 %—31.12.2020
0.5050ex38249992613',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine0 %—31.12.2020
0.7831ex3824999262Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane0 %—31.12.2024
0.5169ex3824999264Preparation containing by weight:89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol,0,1 % or more but not more than 1 % of colourants,1 % or more but not more than 10 % of fluoropolymers0 %—31.12.2021
0.3122ex3824999265Mixture of primary tert-alkylamines0 %—31.12.2024
0.6720ex3824999268Preparation containing by weight:20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9),dissolved in:10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5),64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5), and6 % (±1,0 %) Naphthalene (CAS RN 91-20-3)0 %—31.12.2020
0.6719ex3824999269Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5),7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate), andnot more than 1 % triphenyl phosphate (CAS RN 115‐86-6)0 %—31.12.2020
0.4409ex3824999270Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine0 %—31.12.2024
0.6198ex3824999272N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)0 %—31.12.2023
0.6114ex3824999276Preparation containing:74 % or more but not more than 90 % by weight of (S)‐α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4), and10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)0 %—31.12.2023
0.5834ex3824999280Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)0 %—31.12.2022
0.6546ex3824999282T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene0 %—31.12.2024
0.3074ex3824999284Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:either an aluminium-alkyl compound, oran organic complex of tungsten, oran organic complex of molybdenum0 %—31.12.2023
0.3069ex38249992882,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)0 %—31.12.2020
0.5961ex3824999330Powder Mixture containing by weight:85 % or more of zinc diacrylate (CAS RN 14643-87-9),not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), andnot more than 10 % of zinc stearate (CAS RN 557-05-1)0 %—31.12.2024
0.4719ex3824999335Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)0 %—31.12.2024
0.7379ex3824999338Mixture of 4,4'-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4'-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9)0 %—31.12.2022
0.4527ex3824999342Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea0 %—31.12.2023
0.7153ex3824999345Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:not more than 20 % of disodium sulphate, andnot more than 10 % of sodium chloride0 %—31.12.2021
0.7786ex3824999348Nonhalogenated flame retardant containing by weight:50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034-17-1),35 % or more, but not more than 45 % of a phosphoric acid derivative, andnot more than 6 % of zinc oxide (CAS RN 1314-13-2)0 %—31.12.2024
0.7063ex3824999350Preparation, consisting of acesulfame potassium (CAS RN 55589-62-3) and potassium hydroxide (CAS RN 1310-58-3)0 %—31.12.2021
0.6215ex3824999353Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder0 %—31.12.2023
0.6997ex3824999355Mixture containing by weight:70 % or more, but not more than 90 % of (S)‐indoline‐2‐carboxylic acid (CAS RN 79815-20-6), and10 % or more, but not more than 30 % of o‐chlorocinnamic acid (CAS RN 3752-25-8)0 %—31.12.2021
0.7497ex3824999360Mixture of phytosterols (CAS RN 949109-75-5) in powder form containing by weight:40 % or more but not more than 88 % of sitosterols,20 % or more but not more than 63 % of campesterols,14 % or more but not more than 38 % of stigmasterols,not more than 13 % brassicasterols, andnot more than 5 % sitostanols0 %—31.12.2023
0.4290ex3824999363Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters0 %—31.12.2022
0.7460ex3824999365Reaction mass of 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene0 %—31.12.2023
0.3117ex3824999370Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)0 %—31.12.2024
0.3112ex3824999375Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols0 %—31.12.2024
0.5817ex38249993ex382499968385Preparation containing:C,C'-azodi(formamide) (CAS RN 123-77-3),magnesium oxide (CAS RN 1309-48-4), andzinc bis(p-toluene sulphinate) (CAS RN 24345-02-6),in which the gas formation from C,C'-azodi(formamide) occurs at 135 °C0 %—31.12.2023
0.3049ex38249993ex382499968557Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %—31.12.2023
0.4336ex3824999388Mixture of phytosterols containing by weight:60 % or more, but not more than 80 % of sitosterols,less than 15 % of campesterols,less than 5 % of stigmasterols, andless than 15 % of betasitostanols0 %—31.12.2022
0.7420ex3824999630Rare-earth concentrate containing by weight:20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3),2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8),10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), andnot more than 65 % of zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide0 %—31.12.2022
0.7611ex3824999633Buffer cartridge not exceeding 8000 ml containing:0,05 % or more but not more than 0,1 % by weight of 5‐Chloro-2-methyl-2,3-dihydroisothiazol-3-one (CAS RN 55965-84-9), and0,05 % or more but not more that 0,1 % by weight of 2‐Methyl-2,3-dihydroisothiazol-3-one (CAS RN 2682‐20-4) as a biostatic0 %—31.12.2023
0.3078ex3824999635Calcined bauxite (refractory grade)0 %—31.12.2023
0.4542ex3824999637Structured silica alumina phosphate0 %—31.12.2024
0.7313ex3824999645Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:a particle size of less than 10 μm,a purity by weight of more than 98 %3,2 %—31.12.2020
0.6628ex3824999646Manganese zinc ferrite granulate, containing by weight:52 % or more but not more than 76 % of iron(III)oxide,13 % or more but not more than 42 % of manganese oxide, and2 % or more but not more than 22 % of zinc oxide0 %—31.12.2020
0.3064ex3824999647Mixed metals oxides, in the form of powder, containing by weight:either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,or 30 % or more of lead and 5 % or more of niobium,for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors0 %—31.12.2023
0.6749ex3824999648Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %0 %—31.12.2020
0.5607ex3824999650Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators0 %—31.12.2022
0.6145ex3824999655Carrier in powder form, consisting of:ferrite (Iron oxide) (CAS RN 1309-37-1),manganese oxide (CAS RN 1344-43-0),magnesium oxide (CAS RN 1309-48-4),styrene acrylate copolymer,to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers0 %—31.12.2023
0.5141ex3824999660Fused magnesia containing by weight 15 % or more of dichromium trioxide0 %—31.12.2021
0.3050ex3824999665Aluminium sodium silicate, in the form of spheres of a diameter of:either 1,6 mm or more but not more than 3,4 mm, or4 mm or more but not more than 6 mm0 %—31.12.2023
0.7212ex3824999670Powder containing by weight:28 % or more but not more than 51 % of talc (CAS RN 14807-96-6),30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7),17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)0 %—31.12.2021
0.3119ex3824999673Reaction product, containing by weight:1 % or more but not more than 40 % of molybdenum oxide,10 % or more but not more than 50 % of nickel oxide,30 % or more but not more than 70 % of tungsten oxide0 %—31.12.2024
0.7010ex3824999674Mixture with a non-stoichiometric composition:with a crystalline structure,with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm0 %—31.12.2021
0.7147ex3824999680Mixture consisting of:64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9),25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3), andnot more than 1 % by weight of 3‐(2,3‐epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)0 %—31.12.2021
0.7553ex3824999683Cubic Boron nitride (CAS RN 10043-11-5) coated with nickel and/or nickelphosphide (CAS RN 12035-64-2)0 %—31.12.2023
0.5820ex3824999687Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:0,1 % or more but not more than 1 % of platinum, and0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)0 %—31.12.2022
0.5939ex38260010ex382600102029Mixture of fatty acid methyl esters containing by weight at least:65 % or more but not more than 75 % of C12 FAME,21 % or more but not more than 28 % of C14 FAME,4 % or more but not more than 8 % of C16 FAME,for use in the manufacture of detergents and home and personal care products0 %—31.12.2023
0.5941ex38260010ex382600105059Mixture of fatty acid methyl esters containing by weight at least:50 % or more but not more than 58 % of C8-FAME,35 % or more but not more than 50 % of C10-FAME,for the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid0 %—31.12.2023
0.6132ex39011010ex390140002010High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with:a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min, anda density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, anda vicat softening temperature of min. 94 °C0 %m331.12.2024
0.5142ex3901109030Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper0 %—31.12.2021
0.6953ex3901400020Octene linear low-density polyethylene (LLDPE) in the form of pellets with:10 % or more but not more than 20 % by weight of octene,a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),a melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,a gel area per 24,6 cm3 of not more than 20 mm2, andan anti-oxidant level of not more than 240 ppm0 %m331.12.2020
0.6897ex3901400030Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:more than 10 % but not more than 20 % by weight of copolymer,a melt flow rate (MFR 190°C/2,16 kg) of 0,7 g / 10 min or more but not more than 0,9 g / 10 min, anda density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,for use in the co-extrusion processing of films for flexible food packaging0 %m331.12.2020
0.5092ex3901400040Block copolymer of ethylene with octene in the form of pellets:with a specific gravity of 0,862 or more, but not more than 0,865,able to stretch to at least 200 % its original length,with a hysteresis of 50 % (±10 %),with permanent deformation of not more than 20 %,for use in the manufacture of napkin liners for babies0 %—31.12.2020
0.6920ex3901908053Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), anda melt flow rate of 14g/10 min (MFR 125 °C/2,16 kg, ASTM D1238) or more0 %m331.12.2020
0.6734ex3901908055Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:an acrylic acid content of 6 % or more but not more than 50 % by weight, anda melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)0 %—31.12.2020
0.5049ex3901908067Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more0 %—31.12.2020
0.6731ex3901908070Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)0 %—31.12.2020
0.6998ex3901908073Mixture containing by weight:80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1), and6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)0 %—31.12.2021
0.2902ex3901908091Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid0 %—31.12.2023
0.3906ex3901908092Chlorosulphonated polyethylene0 %—31.12.2023
0.2899ex3901908093Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets0 %—31.12.2023
0.3186ex3901908094Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene0 %—31.12.2023
0.2898ex3901908097Chlorinated polyethylene, in the form of powder0 %—31.12.2023
0.2895ex3902100020Polypropylene, containing no plasticiser:of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),of a heat of fusion of 15 J/g or more but not more than 70 J/g,of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)0 %—31.12.2023
0.4591ex3902100040Polypropylene, containing no plasticiser:of a tensile strength: of 32-77 MPa (as determined by the ASTM D638 method),of a flexural strength of 50-105 MPa (as determined by the ASTM D790 method),of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5‐15 g/10 min (as determined by the ASTM D1238 method),with 40 % or more but not more than 80 % by weight of polypropylene,with 10 % or more but not more than 30 % by weight of glass fibre,with 10 % or more but not more than 30 % by weight of mica0 %—31.12.2024
0.3180ex3902200010Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 8000 %—31.12.2023
0.3179ex3902200020Hydrogenated polyisobutene, in liquid form0 %—31.12.2023
0.3181ex3902300091A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2023
0.5143ex3902300095A-B-A block copolymer, consisting of:a copolymer of propylene and ethylene, and21 % (± 3 %) by weight of polystyrene0 %—31.12.2021
0.5138ex3902300097Liquid ethylene-propylene-copolymer with:a flashpoint of 250 °C or more,a viscosity index of 150 or more,of a number average molecular weight (Mn) of 650 or more0 %—31.12.2021
0.4424ex3902909052Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin0 %—31.12.2023
0.4509ex3902909055Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene0 %—31.12.2023
0.4768ex3902909060Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:liquid at room temperature,obtained by cationic polymerisation of C-5 alkenes monomers,with a number average molecular weight (Mn) of 370 (± 50),with a weight average molecular weight (Mw) of 500 (± 100)0 %—31.12.2024
0.2900ex3902909092Polymers of 4-methylpent-1-ene0 %—31.12.2023
0.6214ex3902909094Chlorinated polyolefins, whether or not in a solution or dispersion0 %—31.12.2023
0.4040ex3902909098Synthetic poly-alpha-olefin with a viscosity at 100° Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene0 %—31.12.2021
0.4166ex3903190040Crystalline polystyrene with:a melting point of 268 °C or more but not more than 272 °C,a setting point of 232 °C or more but not more than 247 °C,whether or not containing additives and filling material0 %—31.12.2021
0.5175ex3903909015Copolymer in the form of granules containing by weight:78 (± 4 %) of styrene,9 (± 2 %) of n-butyl acrylate,11 (± 3 %) of n-butyl methacrylate,1,5 (±0,7 %) of methacrylic acid, and0,01 % or more but not more than 2,5 % of polyolefinic wax0 %—31.12.2023
0.5176ex3903909020Copolymer in the form of granules containing by weight:83 ± 3 % styrene,7 ± 2 % n-butyl acrylate,9 ± 2 % n-butyl methacrylate, and0,01 % or more but not more than 1 % of polyolefinic wax0 %—31.12.2021
0.5168ex3903909025Copolymer in the form of granules containing by weight:82 ± 6 % styrene,13,5 ± 3 % n-butyl acrylate,1 ±0,5 % methacrylic acid, and0,01 % or more but not more than 8,5 % of polyolefinic wax0 %—31.12.2021
0.7861ex3903909033Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more0 %—31.12.2024
0.2891ex39039090ex391190993543Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 oC0 %—31.12.2023
0.7417ex39039090ex390469803888Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)0 %—31.12.2022
0.6565ex3903909045Preparation, in form of powder, containing by weight:86 % or more but not more than 90 % of styrene‐acrylic-copolymer, and9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)0 %m331.12.2024
0.6780ex3903909046Copolymer in the form of granules containing by weight:74 % (± 4 %) styrene,24 % (± 2 %) n-butylacrylate, and0,01 % or more but not more than 2 % methacrylic acid0 %m331.12.2020
0.5473ex39039090ex391190996060Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form0 %—31.12.2021
0.6736ex3903909065Copolymer of styrene with 2, 5-furandione and (1‐methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)0 %—31.12.2020
0.6804ex3903909070Copolymer in the form of granules containing by weight:75 % (± 7 %) styrene, and25 % (± 7 %) methylmethacrylate0 %m331.12.2020
0.3910ex3903909080Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:minimum 65 % styrene,maximum 25 % divinylbenzene,for use in the manufacture of ion exchange resins0 %—31.12.2023
0.4410ex3903909086Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene,35 % or more but not more than 45 % of poly(phenylene ether),not more than 10 % of other additives,and with one or more of the following special colour effects:metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment,fluorescent, as characterized by emitting light during absorption of ultraviolet radiation,bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale0 %—31.12.2023
0.2887ex39043000ex390440003091Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:87 % or more but not more than 92 % of vinyl chloride,2 % or more but not more than 9 % of vinyl acetate, and1 % or more but not more than 8 % of vinyl alcohol,in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink0 %—31.12.2023
0.2885ex3904610020Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions0 %—31.12.2023
0.7675ex3904698020Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)0 %—31.12.2023
0.7626ex3904698030Copolymer of tetrafluoroethylene, hexafluoropropene and ethene0 %—31.12.2023
0.4981ex3904698081Poly(vinylidene fluoride) (CAS RN 24937-79-9)0 %—31.12.2020
0.5560ex3904698085Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder form, whether or not with fillers0 %—31.12.2022
0.3285ex3904698094Copolymer of ethylene and tetrafluoroethylene0 %—31.12.2023
0.2883ex3904698096Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 390 %—31.12.2023
0.3745ex3904698097Copolymer of chlorotrifluoroethylene and vinylidene difluoride0 %—31.12.2024
0.5786ex3905300010Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors0 %—31.12.2022
0.5774ex3905910040Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene0 %—31.12.2022
0.3283ex3905999095Hexadecylated or eicosylated polyvinylpyrrolidone0 %—31.12.2023
0.2880ex3905999096Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol0 %—31.12.2023
0.3282ex3905999097Povidone (INN)-iodine (CAS RN 25655-41-8)0 %—31.12.2023
0.3278ex3905999098Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups0 %—31.12.2023
0.327639069060Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide0 %—31.12.2023
0.3279ex3906909010Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 30040 %—31.12.2023
0.7347ex3906909023Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm0 %—31.12.2022
0.5814ex3906909027Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate0 %—31.12.2022
0.6672ex3906909033Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm0 %—31.12.2020
0.6663ex3906909037Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm0 %—31.12.2020
0.4908ex3906909040Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:a viscosity of not more than 50000 Pa·s at 120 °C as determined by the test method ASTM D 3835,a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,a residual monomer content of less than 1 %0 %—31.12.2020
0.4667ex3906909041Poly(alkyl acrylate) with an ester alkyl chain of C10 to C300 %—31.12.2024
0.7125ex3906909043Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)0 %—31.12.2021
0.2886ex3906909050Polymers of esters of acrylic acid with one or more of the following monomers in the chain:chloromethyl vinyl ether,chloroethyl vinyl ether,chloromethylstyrene,vinyl chloroacetate,methacrylic acid,butenedioic acid monobutyl ester,butenedioic acid monocyclohexyl ester,containing by weight not more than 5 % of each monomer unit0 %—31.12.2023
0.7131ex3906909053Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260°C, containing by weight:75 % or more but not more than 85 % of polyacrylamide, and15 % or more but not more than 25 % of polyethylene glycol0 %—31.12.2021
0.7499ex3906909060Aqueous dispersion containing by weight:more than 10 % but not more than 15 % of ethanol, andmore than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate‐co‐divinylbenzene) with a glycerol derivative0 %—31.12.2023
0.6425ex3906909073Preparation containing by weight:33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer,24 % or more but not more than 28 % of propylene glycol, and37 % or more but not more than 41 % of water0 %—31.12.2024
0.6890ex3907100010Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene0 %—31.12.2020
0.6891ex3907100020Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine0 %—31.12.2020
0.3272ex3907201110Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more0 %—31.12.2023
0.4378ex3907201120Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 400000 %—31.12.2023
0.5379ex3907201160Preparation containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2), andα-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)0 %—31.12.2021
0.5862ex3907202020Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1)0 %—31.12.2022
0.7099ex3907202025Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight:48 % or more but not more than 52 % of propylene oxide, and48 % or more but not more than 52 % of butylene oxide0 %—31.12.2021
0.2876ex3907202030Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone0 %—31.12.2023
0.7532ex3907202035Mixture containing by weight:5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)0 %—31.12.2023
0.4013ex3907202040Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 36000 %—31.12.2023
0.6351ex39072020ex390720995075Poly(p-phenylene oxide) in the form of powderwith a glasstransitiontemperature of 210 °C,with a weight average molecular weight (Mw) of 35000 or more but not more than 80000,with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram0 %—31.12.2024
0.7308ex3907202060Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium0 %—31.12.2022
0.3271ex3907209915Poly(oxypropylene) having alkoxysilyl end-groups0 %—31.12.2023
0.7478ex39072099202,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide0 %—31.12.2023
0.2920ex3907209930Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0 %—31.12.2023
0.7484ex3907209940N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa0 %—31.12.2023
0.3269ex3907209945Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups0 %—31.12.2023
0.4536ex3907209950Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient0 %—31.12.2023
0.4546ex3907209955Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 50000 %—31.12.2023
0.5144ex3907209960Polytetramethylene oxide di-p-aminobenzoate0 %—31.12.2021
0.6839ex3907300015Epoxide resin, halogen-free:containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, andcontaining solvents,for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits0 %—31.12.2020
0.6840ex3907300025Epoxide resin:containing by weight 21 % or more of brome,not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, andcontaining solvents0 %—31.12.2020
0.2759ex39073000ex392690974070Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 85480 %—31.12.2023
0.5578ex3907300060Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)0 %—31.12.2022
0.7427ex3907300070Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), andnone or not more than 0,5 % of carbon black (CAS RN 1333-86-4)0 %—31.12.2022
0.2541ex3907400035α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)0 %—31.12.2023
0.2564ex3907400045α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)0 %—31.12.2023
0.6352ex3907400070Polycarbonate of phosgene and bisphenol A:containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,with p-cumylphenol endcaps, andwith a weight average molecular weight (Mw) of 29900 or more but not more than 319000 %—31.12.2024
0.6355ex3907400080Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps0 %—31.12.2024
0.3263ex3907690010Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol0 %—31.12.2023
0.5160ex3907690040Poly(ethylene terephthalate) pellets or granules:with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, andcontaining not more than 10 % by weight of other modifiers or additives0 %m331.12.2021
0.298039077000Poly(lactic acid)0 %—31.12.2023
0.2918ex3907919010Diallyl phthalate prepolymer, in powder form0 %—31.12.2024
0.2977ex3907998010Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder0 %—31.12.2023
0.5639ex3907998025Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol0 %—31.12.2022
0.4940ex39079980ex391390003020Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)0 %—31.12.2020
0.7491ex3907998035Copolymer in form of a clear, pale yellow liquid, consisting of:phthalic acid isomers and/or aliphatic dicarboxylic acids,aliphatic diols, andfatty acid end-caps,with:a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH,a viscosity at 25 °C of 2000 cPs or more but not more than 8000 cPs, andan acid value less than 10 mg KOH/g0 %—31.12.2023
0.4795ex3907998070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol3,5 %—31.12.2024
0.5057ex3907998080Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles0 %—31.12.2020
0.2923ex3908900010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2023
0.3261ex3908900030Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine0 %—31.12.2023
0.6639ex39089000551,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine (CAS RN 169284-22-4)0 %—31.12.2020
0.7428ex3909200010Polymer mixture, containing by weight:60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1),15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0),5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)0 %—31.12.2022
0.5032ex3909400020Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices0 %—31.12.2020
0.7865ex3909400070Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80 °C or more but not more than 95 °C according to standard ASTM E28-92 (CAS RN 112484-41-0)0 %—31.12.2024
0.4595ex3909509010UV curable water soluble liquid photopolymer consisting of a mixture by weight of:60 % or more of two-functional acrylated polyurethane oligomers, and30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and10 % (± 3 %) of hydroxyl functionalized mono‐functional (metha) acrylates0 %—31.12.2024
0.6423ex3909509020Preparation containing by weight:14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,3 % or more but not more than 5 % of enzymatically modified starch, and77 % or more but not more than 83 % of water0 %—31.12.2024
0.6420ex3909509030Preparation containing by weight:16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,19 % or more but not more than 23 % of diethylene glycol butyl ether, and60 % or more but not more than 64 % of water0 %—31.12.2024
0.6424ex3909509040Preparation containing by weight:34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,37 % or more but not more than 39 % of propylene glycol, and26 % or more but not more than 28 % of water0 %—31.12.2024
0.6921ex3910000015Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated0 %—31.12.2020
0.3260ex3910000020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]0 %—31.12.2023
0.7057ex3910000025Preparations containing by weight:10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5), and10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)0 %—31.12.2021
0.7058ex3910000035Preparations containing by weight:30 % or more, α-Butyldimethylsilyl-ω-(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6), and10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)0 %—31.12.2021
0.4049ex3910000040Silicones of a kind used in the manufacture of long term surgical implants0 %—31.12.2021
0.7217ex3910000045Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa·s (CAS RN 70131-67-8)0 %—31.12.2021
0.4300ex3910000050Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum0 %—31.12.2022
0.7218ex3910000055Preparation containing by weight:55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083‐19‐2),30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)0 %—31.12.2021
0.4845ex3910000060Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups0 %—31.12.2024
0.5926ex3910000070Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices0 %—31.12.2023
0.6324ex3910000080Monomethacryloxypropylterminated poly(dimethylsiloxane)0 %—31.12.2024
0.4413ex3911100081Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:an iodine value of more than 120, anda Gardner Colour of more than 10 for the pure product, ora Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)0 %—31.12.2023
0.7163ex3911901920Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing:83 % or more by weight of 3a,4,7,7a‐tetrahydro‐4,7‐methanoindene (dicyclopentadiene),a synthetic rubber,whether or not containing by weight 7 % or more of tricyclopentadiene,and each separate component containing:either an aluminium-alkyl compound, oran organic complex of tungsten, oran organic complex of molybdenum0 %—31.12.2023
0.4280ex3911901930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %—31.12.2022
0.5145ex3911901940m-Xylene formaldehyde resin0 %—31.12.2021
0.6422ex3911901950Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form0 %—31.12.2024
0.6519ex3911901970Preparation, containing:Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight0 %—31.12.2024
0.3257ex3911909925Copolymer of vinyltoluene and α-methylstyrene0 %—31.12.2023
0.5053ex39119099301,4:5,8-Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated0 %—31.12.2020
0.5109ex3911909935Alternated copolymer of ethylene and maleic anhydride (EMA)0 %—31.12.2020
0.3221ex3911909940Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight0 %—31.12.2023
0.3256ex3911909945Copolymer of maleic acid and methyl vinyl ether0 %—31.12.2023
0.5729ex3911909953Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)0 %—31.12.2022
0.5730ex3911909957Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)0 %—31.12.2022
0.3255ex3911909965Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether0 %—31.12.2023
0.4091ex3911909986Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)0 %—31.12.2021
0.4912ex3912110030Cellulose triacetate (CAS RN 9012-09-3)0 %—31.12.2021
0.4953ex3912110040Cellulose diacetate powder0 %—31.12.2020
0.3251ex3912398510Ethylcellulose, not plasticized0 %—31.12.2023
0.3253ex3912398520Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose0 %—31.12.2023
0.3252ex3912398530Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0 %—31.12.2023
0.5172ex3912398540Hypromellose (INN) (CAS RN 9004-65-3)0 %—31.12.2021
0.6718ex3912398550Polyquaternium 10 (CAS RN 68610-92-4)0 %—31.12.2020
0.4017ex3912901020Hydroxypropyl methylcellulose phthalate0 %—31.12.2023
0.3898ex3913900030Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 3500000 %—31.12.2023
0.3749ex3913900085Sterile sodium hyaluronate (CAS RN 9067-32-7)0 %—31.12.2023
0.3249ex3913900095Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)0 %—31.12.2023
0.4797ex3916200091Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:titanium dioxide,poly(methyl methacrylate),calcium carbonate,binding agents0 %—31.12.2024
0.5988ex3916901010Rods with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride),7 % or more but not more than 9 % of polytetrafluorethylene, if present,10 % or more but not more than 25 % of inorganic fillers0 %—31.12.2023
0.4641ex3917400091Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses0 %—31.12.2024
0.2421ex39191019ex39191080ex39199080102531Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2023
0.4800ex39191080ex391990802720Polyester film:coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, andon the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner0 %—31.12.2024
0.2910ex3919108035Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2023
0.4757ex3919108037Polytetrafluoroethylene film:with a thickness of 100 μm or more,an elongation at break of not more than 100 %,coated on one side with a pressure sensitive silicon adhesive0 %—31.12.2020
0.4093ex39191080ex391990804043Black poly(vinyl chloride) film:with a gloss of more than 30 degrees according to ASTM D2457,whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner0 %—31.12.2022
0.4761ex39191080ex391990804326Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner0 %—31.12.2020
0.4303ex39191080ex391990804545Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %—31.12.2022
0.3035ex39191080ex39199080ex39201089504125Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs0 %—31.12.2023
0.3036ex39191080ex391990805553Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %—31.12.2022
0.2416ex39191080ex39199080ex39206100573030Reflecting sheet:of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern,covered on one or both sides with one or more layers of plastic or metallisation, andwhether or not covered on one side with a self-adhesive layer and a release sheet0 %—31.12.2023
0.6886ex3919108063Reflecting film consisting ofa layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,a layer of an acrylic resin having embedded glass beads,a layer of an acrylic resin hardened by a melamine cross-linking agent,a metal layer,an acrylic adhesive, anda release film0 %—31.12.2020
0.5161ex39191080ex391990807075Rolls of polyethylene foil:self-adhesive on one side,of a total thickness of 0,025 mm or more, but not more than 0,09 mm,of a total width of 60 mm or more, but not more than 1110 mm,for use in the manufacture of products of Headings 8521 or 8528 for protection purposes0 %—31.12.2021
0.4545ex39191080ex391990807350Self-adhesive reflecting sheet whether or not in segmented pieces:whether or not containing a watermark,with or without an application tape coated on one side with an adhesive,the reflective sheet consists of:a layer of acrylic or vinyl polymer,a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,a layer of metallisation,an adhesive layer, anda release sheet,whether or not containing an additional layer of polyester0 %—31.12.2023
0.5166ex39191080ex391990807580Self-adhesive reflecting film, consisting of several layers including:a copolymer of acrylic resin,polyurethane,a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,glass microspheres, andan adhesive layer, with a release liner on one or both sides0 %—31.12.2021
0.4799ex39191080ex391990808528Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film:coated on one side with an acrylic UV-sensitive adhesive and a liner,of a total thickness of 65 μm or more without release liner0 %—31.12.2024
0.4414ex3919908019Transparent poly(ethylene terephthalate) self-adhesive film:free from impurities or faults,coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,with a total thickness without the liner of 54 μm or more but not more than 64 μm, anda width of more than 1295 mm but not more than 1305 mm0 %—31.12.2023
0.7415ex3919908021Polytetrafluoroethylene film:with a thickness of 50 μm or more but not more than 155 μm,with a width of 6,30 mm or more but not more than 585 mm,an elongation at break of not more than 200 %, andcoated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 40 μm0 %—31.12.2022
0.4314ex3919908022Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm0 %—31.12.2024
0.3243ex3919908023Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner0 %—31.12.2023
0.4760ex3919908024Reflecting laminated sheet:consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,covered on both sides with one or more layers of plastic material, andcovered on one side with an adhesive layer and a release sheet0 %—31.12.2024
0.4415ex3919908033Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm0 %—31.12.2023
0.4398ex3919908035Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:a layer of polyurethane containing glass micro beads,a layer of poly(ethylene vinyl acetate),an adhesive layer, anda release sheet0 %—31.12.2023
0.7503ex3919908037Polyethylene or polycarbonate film, cut into ready to use forms:one side partly printed whereby part of the printing either gives information about the meaning of LED's visible at the unprinted areas, or marks those points which must be touched to operate the system,the other side partly covered with an adhesive layer,both sides covered with a release liner, andwith dimensions of not more than 14 cm x 2,5 cm,for use in the manufacture of push-button switches for mechatronic system adjustable furniture0 %—31.12.2023
0.4445ex3919908049Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet0 %—31.12.2023
0.5507ex3919908051Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet0 %—31.12.2023
0.6883ex3919908052White polyolefin tape consisting of:an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm,a polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, anda non-silicone release layer with a thickness below 1 μm0 %—31.12.2020
0.4532ex3919908054Poly(vinyl chloride) film, on one side covered with:a polymer layer,an adhesive layer,a release liner, on one side embossed, containing oblate spheres,whether or not on the other side covered with an adhesive layer and a metallised polymer layer0 %—31.12.2024
0.5052ex3919908063Co-extruded trilayer film:each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,coated with an acrylic pressure sensitive adhesive andwith a release liner,of an overall thickness of not more than 110 μm0 %—31.12.2020
0.4947ex3919908065Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner0 %—31.12.2024
0.4925ex3919908070Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad0 %—31.12.2020
0.4964ex3919908082Reflecting film consisting of:a polyurethane layer,a glass microspheres layer,a metallised aluminium layer, andan adhesive, covered on one or both sides with a release liner,whether or not a poly(vinyl chloride) layer,a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use0 %—31.12.2020
0.4459ex39199080ex900190008333Reflector or diffuser sheets, in rolls:for protection against ultraviolet or infra-red heat radiation, to be affixed to windows, orfor equal transmission and distribution of light, intended for LCD modules0 %—31.12.2022
0.3241ex3920102530Mono-layered high-density polyethylene film:containing by weight 99 % or more of polyethylene,with a thickness of 12 μm or more but not more than 20 μm,with a length of 4000 m or more but not more than 7000 m,with a width of 600 mm or more but not more than 900 mm0 %—31.12.2023
0.4419ex3920102891Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:is repetitive and equally spaced along the length of the film,is equally and visibly aligned when viewed from the back or front of the film0 %—31.12.2023
0.6640ex3920104040Tubular layered film predominately of polyethylene:consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,having a total thickness of 55 μm or more,having a diameter of 500 mm or more but not more than 600 mm0 %—31.12.2020
0.5139ex3920108930Ethylene vinyl acetate (EVA) film with:a raised relief surface with embossed undulations, anda thickness of more than 0,125 mm0 %—31.12.2021
0.3754ex3920108940Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm0 %—31.12.2021
0.5482ex3920202140Sheets of biaxially - oriented polypropylene film:with the thickness of not more than 0,1 mm,printed on both sides with specialised coatings to allow banknote security printing0 %—31.12.2021
0.4394ex3920202960Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa, anda tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa,as determined by test method ASTM D882/ISO 527-30 %—31.12.2023
0.3028ex3920202970Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:a thickness of 55 μm or more but not more than 97 μm,a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, anda tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa0 %—31.12.2024
0.5167ex3920202994Co-extruded trilayer film:each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 70 μm0 %—31.12.2022
0.3024ex3920431092Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)0 %—31.12.2023
0.3235ex39204310ex392049109493Film of a specular gloss of 70 or more, measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 94030 %—31.12.2023
0.3026ex3920431095Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet0 %—31.12.2023
0.5930ex3920491030Film of a (polyvinyl)chloride-copolymercontaining by weight 45 % or more of fillerson a support0 %—31.12.2023
0.3021ex3920510020Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm0 %—31.12.2023
0.5506ex3920510030Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm0 %—31.12.2023
0.5753ex3920510040Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)0 %—31.12.2023
0.7418ex39206219ex392062900510Poly(ethylene terephthalate) film in rolls:with a thickness of 0,335 mm or more but not more than 0,365 mm, andcoated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm0 %—31.12.2022
0.3234ex3920621908Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:only dyed in the mass, ordyed in the mass and metallised on one side0 %—31.12.2023
0.3017ex3920621912Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %—31.12.2023
0.3022ex3920621918Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %—31.12.2023
0.3034ex3920621920Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers0 %—31.12.2023
0.3356ex3920621938Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm0 %—31.12.2023
0.3357ex3920621948Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)0 %—31.12.2020
0.2589ex3920621952Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method)0 %—31.12.2023
0.4344ex3920621960Poly(ethylene terephthalate) film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm0 %—31.12.2022
0.4520ex3920621976Transparent poly(ethylene terephthalate) film:coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,with a light transmission of more than 93 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm0 %—31.12.2023
0.3328ex3920690020Film of poly(ethylene naphthalene-2,6-dicarboxylate)0 %—31.12.2023
0.7882ex3920690030Mono- or multilayer, transverse oriented, shrink film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 20 μm or more but not more than 100 μm,with a length of 2385 m or more but not more than 9075 m,biodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2024
0.6483ex3920690050Monolayer, biaxially oriented film:composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,having a thickness of 20 μm or more but not more than 120 μm,biodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2024
0.6484ex3920690060Monolayer, transverse oriented, shrink film:composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),having a thickness of 45 μm or more but not more than 50 μm,biodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2024
0.7883ex3920690070Mono- or multilayer, biaxially oriented film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 9 μm or more but not more than 120 μm,with a length of 1395 m or more but not more than 21560 m,biodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2024
0.6515ex3920791010Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm0 %p/st31.12.2024
0.4766ex3920910052Poly(vinyl butyral) film:containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,with a thickness of 0,73 mm or more but not more than 1,50 mm0 %—31.12.2024
0.3329ex3920910091Poly(vinyl butyral) film having a graduated coloured band3 %—31.12.2023
0.3136ex3920910093Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm0 %—31.12.2024
0.4508ex3920910095Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser0 %—31.12.2023
0.3917ex3920992840Polymer film containing the following monomers:poly (tetramethylene ether glycol),bis (4-isocyanotocyclohexyl) methane,1,4-butanediol or 1,3-butanediol,with a thickness of 0,25 mm or more but not more than 5,0 mm,embossed with a regular pattern on one surface,and covered with a release sheet0 %—31.12.2023
0.5938ex3920992845Transparent polyurethane film metallised on one side:with a gloss of more than 90 degrees according to ASTM D2457,covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer,covered on the other side with a protective poly(ethylene terephthalate) film,with a total thickness of more than 204 μm but not more than 244 μm0 %—31.12.2024
0.4192ex3920992850Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film0 %—31.12.2021
0.6579ex3920992865Matt, thermoplastic polyurethane foil in rolls with:a width of 1640 mm (± 10 mm),a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),a thickness of more than 365 μm but not more than 760 μm,a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),an elongation to break of 470 % (as determined by the method: EN ISO 527)0 %m231.12.2024
0.5315ex3920992870Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:microspheres with a coating of metal, whether or not alloyed with gold,an adhesive layer,with a protective layer of silicone or poly(ethylene terephthalate) on one side,with a protective layer of poly(ethylene terephthalate) on the other side, andwith a width of 5 cm or more but not more than 100 cmwith a length of not more than 2000 m0 %—31.12.2021
0.3326ex3920995925Poly(1-chlorotrifluoroethylene) film0 %—31.12.2023
0.7603ex3920995930Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite0 %—31.12.2023
0.2873ex3920995955Ion-exchange membranes of fluorinated plastic material0 %—31.12.2023
0.3135ex3920995965Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %0 %—31.12.2023
0.7127ex3920995970Tetrafluoroethylene film, put up in rolls, with:a thickness of 50 μm,a melting point of 260 °C, anda specific gravity of 1,75 (ASTM D792),for use in the manufacture of semiconductor devices0 %—31.12.2021
0.7529ex3920995975Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with:a thickness of 0,010 mm or more but not more than 0,80 mm,a width of 1219 mm or more but not more than 1575 mm, anda melting point of 252 °C (measured according ASTM D-3418)0 %—31.12.2023
0.4095ex3920999020Anisotropic conductive film, in rolls, of a width of 1,2 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays0 %—31.12.2023
0.3318ex3921131010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,100920 %m331.12.2024
0.5815ex3921131020Rolls of open-cell polyurethane foam:with a thickness of 2,29 mm (±0,25 mm),surface-treated with a foraminous adhesion promoter, andlaminated to a polyester film and a layer of textile material0 %—31.12.2022
0.6066ex3921190030Blocks with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene, if present10 % or more but not more than 25 % of inorganic fillers0 %—31.12.2023
0.6911ex3921190040Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:a width of 98 mm or more but not more than 170 mm,a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators3,2 %—31.12.2020
0.7132ex3921190050Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:a total thickness of more than 0,05 mm but not more than 0,20 mm,a water entry pressure between 5 and 200 kPa according to ISO 811, andan air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-50 %—31.12.2021
0.7280ex3921190060Multi-porous multilayer separator foil with:one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,a width of 65 mm or more but not more than 170 mm,a total thickness of 0,01 mm or more but not more than 0,03 mm,a porosity of 0,25 or more but not more than 0,650 %m231.12.2022
0.7309ex3921190070Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having:a width of 1600 mm or more but not more than 1730 mm, anda membrane thickness of 15 μm or more, but not more than 50 μm,for use in the manufacture of a bi-component ePTFE membrane0 %—31.12.2022
0.7263ex3921190080Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:zero transversal production direction (TD) shrinkage,a total thickness of 10 μm or more but not more than 50 μm,a width of 15 mm or more but not more than 900 mm,a length of more than 200 m but not more than 3000 m, andan average pore size between 0,02 μm and 0,1 μm0 %—31.12.2022
0.3314ex3921190093Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment0 %—31.12.2023
0.3002ex3921190095Film of polyethersulfone, of a thickness of not more than 200 μm0 %—31.12.2023
0.3003ex3921901010Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres0 %—31.12.2023
0.4379ex3921901020Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin0 %—31.12.2023
0.6156ex3921901030Multilayer film consisting of:a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm0 %m231.12.2023
0.4844ex39219055ex70194000ex70194000252129Prepreg sheets or rolls containing polyimide resin0 %—31.12.2024
0.7510ex3921905535Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards0 %m231.12.2023
0.6742ex3921905540Three layered fabric sheet, in rolls:comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,coated on both sides with polyamide,of a total thickness not more than 135 μm,of a total weight not more than 80 g/m20 %m231.12.2020
0.6807ex3921905550Glass fibre-reinforced sheets of reactive, halogen-free epoxide resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems0 %m231.12.2020
0.3312ex3921906035Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells0 %—31.12.2023
0.5396ex3923109010Photomask or wafer compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage, andwith or without a gasket seal,of a kind used in the photolithography or other semiconductor production to house photomasks or wafers0 %—31.12.2021
0.7040ex3926300020Plastic logo of the automobile manufacturer with mounting brackets on the back side, whether or not chromed, for use in the manufacture of goods of Chapter 870 %—31.12.2021
0.7335ex39263000ex392690973034Electroplated interior or exterior decorative parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,layers of copper, nickel and chromium,for use in the manufacturing of parts for motor vehicles of heading 8701 to 87050 %p/st31.12.2022
0.7630ex3926300040Plastic internal door handle used in the manufacture of motor vehicles0 %—31.12.2023
0.2764ex3926909710Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm0 %—31.12.2023
0.3756ex3926909715Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems0 %—31.12.2023
0.2978ex3926909720Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0 %—31.12.2023
0.6717ex3926909723Plastic cover with clips for the exterior rear-view mirror of motor vehicles0 %p/st31.12.2020
0.3850ex3926909725Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm0 %—31.12.2023
0.7445ex3926909727Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror0 %—31.12.2023
0.5474ex3926909730Parts of car radio and car air-conditioner front panels:of acrylonitrile-butadiene-styrene with or without polycarbonate,coated with a copper, a nickel and a chrome layers,with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm0 %—31.12.2021
0.6301ex3926909733Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls0 %p/st31.12.2024
0.7061ex3926909740Silicone shell for breast implant0 %—31.12.2021
0.6166ex3926909750Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces0 %p/st31.12.2023
0.7196ex3926909777Silicone decoupling ring with an inner diameter of 14,7 mm or more but not more than 16,0 mm, in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems0 %p/st31.12.2021
0.3046ex4007000010Siliconated vulcanised rubber thread and cord0 %—31.12.2023
0.6708ex4009420020Rubber brake hose with:textile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,for use in the manufacture of goods of Chapter 870 %—31.12.2024
0.7042ex40103100ex40103300ex40103900101010Vulcanized rubber endless transmission belt of trapezoidal cross‐section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 870 %—31.12.2021
0.6844ex4016930020Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mould split of not more than 0,25 mm, in the shape of a rectangle:with a length of 72 mm or more but not more than 825 mm;with a width of 18 mm or more but not more than 155 mm0 %—31.12.2020
0.7170ex4016995710Air intake hose for air supply to the combustion part of the engine comprising at least:one flexible rubber hose,one plastic hose, andmetal clips,whether or not a resonator,for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.7169ex4016995720Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.7357ex4016995730Pin boot of a brake calliper made of vulcanized rubber with:an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,a height of 15 mm or more, but not more than 40 mm, anda ribbed design,for use in the manufacture of goods of Chapter 870 %—31.12.2022
0.5148ex4016999730Tyre moulding bladder0 %—31.12.2021
0.5842ex4104411910Buffalo leather, split, chrome tanned synthetic retanned ('crust'), dry0 %—31.12.2022
0.25554105100041053090Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2023
0.25534106210041062290Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2023
0.255441063100410632004106409041069200Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 41140 %—31.12.2023
0.6223ex4408393010Okoume veneer sheets:of a length of 1270 mm or more, but not more than 3200 mm,of a width of 150 mm or more, but not more than 2000 mm,of a thickness of 0,5 mm or more, but not more than 4 mm,not sanded, andnot planed0 %—31.12.2023
0.7065ex44129940ex44129950ex44129985101020Laminated wood consisting of two layers of sheets for veneering:a width of 210 mm or more but not more than 320 mm,a length of 297 mm or more but not more than 450 mm,a thickness of 0,45 mm or more but not more than 0,8 mm,for use in the manufacture of products falling within heading 4420, 4421, 4820, 4909 or 49110 %—31.12.2021
0.4217ex5004001010Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk0 %—31.12.2021
0.2551ex50050010ex500500901010Yarn spun entirely from silk waste (noil), not put up for retail sale0 %—31.12.2023
0.254452081110Fabrics for the manufacture of bandages, dressings and medical gauzes5,2 %—31.12.2023
0.7372ex5311009010Plain-woven fabric of paper yarns glued on a tissue paper layer:with a weight of 190 g/m2 or more but not more than 280 g/m2, andcut into rectangles with a side length of 40 cm or more but not more than 140 cm0 %—31.12.2022
0.7515ex5311009020Sisal cloth in rolls with:a length of 20 metres or more but not more than 30 metres, anda maximum width of 2,5 metres,for use in the production of Stainless Steel Kitchenware0 %—31.12.2023
0.7608ex5402440010Synthetic elastomeric filament yarn:untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1000 dtex,composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran,for use in the manufacture of disposable hygiene products of heading 96190 %—31.12.2023
0.4902ex5402470020Bicomponent monofilament yarn of not more than 30 dtex, consisting of:a poly(ethylene terephthalate) core, andan outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),for use in the manufacture of filtration fabrics0 %—31.12.2020
0.2975ex5402490030Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures0 %—31.12.2023
0.3098ex5402490050Non-textured filament yarn of poly(vinyl alcohol)0 %—31.12.2023
0.3096ex5402490070Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn0 %m31.12.2023
0.6884ex5403390010Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry0 %—31.12.2020
0.2481ex5404190050Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers0 %—31.12.2023
0.3311ex5404909020Strip of polyimide0 %—31.12.2023
0.4258ex5407100010Textile fabric, consisting of warp filament yarns of polyamide‐6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p‐phenylenediamine and 3,4'–oxybis (phenyleneamine)0 %—31.12.2022
0.3090ex55031100ex560130001040Synthetic staple fibres of a copolymer of terephthalic acid, p‐phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7 mm0 %—31.12.2023
0.3214ex55039000ex55069000ex56013000201010Poly(vinyl alcohol) fibres, whether or not acetalized0 %—31.12.2023
0.3212ex56031110ex56031190ex56031210ex56031290ex56039110ex56039190ex56039210ex560392901010101010101010Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:of a thickness of 200 μm or more but not more than 280 μm, andof a weight of 20 g/m2 or more but not more than 50 g/m20 %m231.12.2023
0.2552ex56031290ex56031390ex56031490ex56039290ex56039390ex56039490303010604030Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0 %m231.12.2023
0.2548ex56031290ex560313906060Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2023
0.5059ex5603131020Non-woven of spunbonded polyethylene, with a coating,of a weight of more than 80 g/m2 but not more than 105 g/m2, andan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2020
0.5987ex5603149040Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2,whether or not laminated on one side with a membrane or a membrane and aluminium,of a kind used for the manufacture of industrial filters0 %m231.12.2023
0.3041ex56039290ex560393902020Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene0 %m231.12.2023
0.3042ex56039290ex560394907040Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene0 %m231.12.2023
0.5197ex56039290ex560393908050Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch properties,for use in the manufacture of infant/child care products0 %m231.12.2021
0.6135ex5603939060Nonwovens made of polyester fibres:with a weight of 85 g/m2,with a constant thickness of 95 μm (± 5 μm),neither coated nor covered,in 1 m wide rolls of 2000 m to 5000 m length,suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters0 %m231.12.2023
0.3210ex5603949020Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips0 %m231.12.2023
0.3406ex5607509010Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures0 %—31.12.2024
0.2415ex5803001091Gauze of cotton, of a width of less than 1500 mm0 %—31.12.2023
0.7081ex5903209020Two layers' plastic-laminated textile fabric with:one layer consisting of knitted or crocheted polyester textile fabric,other layer consisting of polyurethane foam,a weight of 150 g/m2 or more, but not more than 500 g/m2,a thickness of 1 mm or more, but not more than 5 mm,for use in the manufacture of the retractable roof of motor vehicles0 %—31.12.2021
0.2417ex5906999010Rubberised textile fabric, consisting of warp yarns of polyamide‐6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine)0 %—31.12.2023
0.2453ex5907000010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm0 %—31.12.2021
0.3207ex59119099ex842199903092Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %—31.12.2023
0.4638ex5911909940Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %—31.12.2024
0.7340ex5911909950Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers0 %—31.12.2022
0.6469ex6804210020Discs:of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,having a self-sharpening effect by constant release of the diamonds,suitable for abrasive cutting of wafers,whether or not containing a hole in the centre,whether or not on a support,with a weight of not more than 377 g per piece, andwith an external diameter of not more than 206 mm0 %p/st31.12.2024
0.7126ex6805300010Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors0 %—31.12.2021
0.2755ex6813890020Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components0 %—31.12.2023
0.5931ex6814100010Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres0 %—31.12.2023
0.2546ex6903909030Silicon carbide reactor tubes and holders having a softening point of 1400 °C or higher0 %—31.12.2023
0.4978ex6909190020Silicon nitride (Si3N4) rollers or balls0 %—31.12.2020
0.6071ex6909190025Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide0 %—31.12.2023
0.3403ex6909190030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0 %—31.12.2023
0.2538ex69091900ex691490005020Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:2 % or more of diboron trioxide,28 % or less of silicon dioxide, and60 % or more of dialuminium trioxide0 %—31.12.2023
0.3766ex6909190060Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end0 %—31.12.2023
0.4582ex6909190070Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section0 %—31.12.2023
0.3404ex6914900030Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm0 %—31.12.2024
0.6651ex7004908010Alkali-aluminosilicate drawn flat glass sheet with:a scratch proof coating of a thickness of 45 μm (+/‐ 5 μm),a total thickness of 0,45 mm or more but not more than 1,1 mm,a width of 300 mm or more but not more than 3210 mm,a length of 300 mm or more but not more than 2000 mm,a visible light transmission of 90 % or more,an optical distortion of 55° or more0 %—31.12.2020
0.6286ex7006009025Glass wafer made of borosilicate float glass:with a total thickness variation of 1 μm or less, andlaser-engraved0 %p/st31.12.2024
0.7619ex7006009040Plates of sodalime glass of STN (Super Twisted Nematic) quality having:a length of 300 mm or more but not more than 1500 mm,a width of 300 mm or more but not more than 1500 mm,a thickness of 0,5 mm or more but not more than 1,1 mm,an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,with or without a multilayer anti-reflection-coating on the other side and machined (chamfered) edges0 %—31.12.2023
0.6380ex7009100030Layered glass with mechanical dimming ability by different angles of incident light comprising:whether or not a layer of chrome,a break-resistance adhesive tape or hot-melt adhesive, anda release film on the front side and protective paper at the back side,of a kind used for interior rear-view mirrors of vehicles0 %p/st31.12.2024
0.6870ex7009100040Electrochromic self-dimming inside rear-view mirror, consisting of:a mirror support,a plastic casing, andan integrated circuit,for use in the manufacture of motor vehicles of Chapter 870 %—31.12.2020
0.5789ex7009100050Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors:whether or not equipped with plastic backing plate,whether or not equipped with a heating element,whether or not equipped with Blind Spot Module (BSM) display0 %—31.12.2022
0.5022ex7009910010Unframed glass mirrors with:a length of 1516 mm (± 1 mm),a width of 553 mm (± 1 mm),a thickness of 3 mm (±0,1 mm),the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm,a lead content of not more than 90 mg/kg, anda corrosion resistance of 72 hours or more according to ISO 9227 salt spray test0 %p/st31.12.2020
0.3400ex7014000010Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware0 %—31.12.2023
0.3161ex70191200ex701912000222Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials0 %—31.12.2023
0.5750ex70191200ex701912000525Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (±0,5 μm)0 %—31.12.2022
0.2532ex7019191010Yarn of 33 tex or a multiple thereof (±7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers0 %—31.12.2023
0.5749ex7019191015S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (- 1 μm / +1,5 μm)0 %—31.12.2022
0.5021ex7019191020Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2020
0.5020ex7019191025Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2020
0.2535ex7019191030Yarn of E-glass of 22 tex (±1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate0 %—31.12.2024
0.4848ex7019191050Yarn of 11 tex or a multiple thereof (±7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated0 %—31.12.2022
0.2872ex7019191055Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:9 % or more but not more than 16 % of magnesium oxide,19 % or more but not more than 25 % of aluminium oxide,0 % or more but not more than 2 % of boron oxide,without calcium oxide,coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene0 %—31.12.2024
0.4024ex70191910ex701990006030High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)0 %—31.12.2023
0.3153ex70191910ex701990007020Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)0 %—31.12.2023
0.4059ex7019390050Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts0 %—31.12.2021
0.4476ex70194000ex701940001119Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°C and 120 °C (measured according to IPC-TM-650) of:10 ppm per°C or more but not more than 12ppm per °C in the length and width, and20 ppm per°C or more but not more than 30 ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)0 %—31.12.2023
0.7056ex70194000ex701952007030E-fibre glass fabrics:having a weight of 20 g/m2 or more, but not more than 214 g/m2,impregnated with silane,in rolls,having a humidity content by weight of 0,13 % or less, andhaving not more than 3 hollow fibres out of 100000 fibres,for the exclusive use in the manufacture of prepregs and copper clad laminates0 %m231.12.2021
0.7647ex7019520040Epoxy resin coated glass woven fabric containing by weight:91 % or more but not more than 93 % of glass fibres,7 % or more but not more than 9 % of epoxy resin0 %—31.12.2023
0.3940ex7019900010Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate0 %—31.12.2023
0.5348ex70200010ex761699901077Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body0 %p/st31.12.2021
0.7266ex7020001020Raw material for optical elements of fused silicon dioxide with:a thickness of 10 cm or more but not more than 40 cm anda weight of 100 kg or more0 %p/st31.12.2022
0.4127ex7201101110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm0 %—31.12.2021
0.4128ex7201103010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon0 %—31.12.2021
0.335372025000Ferro-silico-chromium0 %—31.12.2023
0.4853ex7202998010Ferro-dysprosium, containing by weight:78 % or more of dysprosium, and18 % or more but not more than 22 % of iron0 %—31.12.2020
0.7235ex7315119010Roller type steel timing chain with a fatigue limit of 2 kN at 7000 rpm or more for use in the manufacture of engines of motor vehicles0 %—31.12.2022
0.7166ex7318190030Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.7502ex7318240030Restraint joint elements:of martensitic stainless steel according to specification 17-4PH,injection moulded,with a rockwell hardness of 38 (±1) or 53 (+2/-1),measuring 9 mm x 5,5 mm x 6,5 mm or more, but not more than 35 mm x 17 mm x 8 mm,of a kind used for restraint joints for tubes and pipes0 %—31.12.2023
0.4548ex7320901091Flat spiral spring of tempered steel, with:a thickness of 2,67 mm or more, but not more than 4,11 mm,a width of 12,57 mm or more, but not more than 16,01 mm,a torque of 18,05 Nm or more, but not more than 73,5 Nm,an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°,for use in the manufacture of tensioners for power transmission belts, for internal combustion engines0 %p/st31.12.2023
0.4126ex7326200020Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling0 %—31.12.2021
0.7414ex7326909240Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with:a diameter of 5752 mm or more but not more than 5758 mm,a height of 3452 mm or more but not more than 3454 mm,a total weight 167875 kg or more but not more than 168125 kg,of a kind used for the fabrication of a nuclear reactor vessel0 %p/st31.12.2022
0.7891ex7326909440Steel ball neck, drop forged, machined, also heat treated or surface treated, with an angle between the centre of the conical head and the arm of less than 90° or with an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars0 %—31.12.2024
0.6680ex7326909840Iron and steel weights:whether or not with parts of other material,whether or not with parts of other metals,whether or not surface treated,whether or not printed,of a kind used for the production of remote controls0 %—31.12.2020
0.7365ex8708809930Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:with a chrome coating,of a diameter of 11 mm or more, but not more than 28 mm,of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding0 %—31.12.2022
0.7401ex74091900ex741021001070Plates or sheets:with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,and containing at least one of the following:poly(tetrafluoroethylene) (CAS RN 9002-84-0),poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4),epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height,for use in the manufacture of circuit boards0 %—31.12.2022
0.5311ex74101100ex85079080ex85459090106030Roll of laminate foil of graphite and copper, with:a width of 610 mm or more but not more than 620 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric rechargeable batteries1,3 %—31.12.2020
0.3352ex7410210010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0 %—31.12.2023
0.7509ex7410210020Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards0 %m231.12.2023
0.3005ex7410210030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil0 %—31.12.2023
0.3926ex7410210040Sheet or plates:consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, orconsisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm0 %—31.12.2023
0.4479ex7410210050Plates:consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, andwith a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC‐TM-6500 %—31.12.2023
0.7341ex7413000020Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed0 %—31.12.2022
0.2447ex74199990ex761699909160Disc (target) with deposition material, consisting of molybdenum silicide:containing 1mg/kg or less of sodium, andmounted on a copper or aluminium support0 %—31.12.2023
0.7911ex7506200010Sheets and strips in coils of nickel alloy C276 (EN 2.4819) witha thickness of 0,5 mm or more but not more than 3 mm,a width of 770 mm or more but not more than 1250 mm0 %—31.12.2024
0.589076012020Slabs and billets of unwrought aluminium alloys4 %—31.12.2023
0.4259ex7601202010Slabs and billets of aluminium alloy containing lithium0 %—31.12.2022
0.7752ex7604210010Hollow profile with:one closed chamber of aluminium alloy 6063-T5 or 6060-T5,a wall thickness of not more than 0,7 mm, andan anodized layer of 10 μm at the surface,for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases0 %—31.12.2024
0.5029ex76042910ex760612991020Sheets and bars of aluminium-lithium alloys0 %—31.12.2020
0.6417ex7604291040Bars and rods of aluminium alloys containing by weight:0,25 % or more but not more than 7 % of zinc, and1 % or more but not more than 3 % of magnesium, and1 % or more but not more than 5 % of copper, andnot more than 1 % of manganese,consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process0 %—31.12.2024
0.2410ex7605190010Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm0 %—31.12.2023
0.6418ex7605290010Wire of aluminium alloys containing by weight:0,10 % or more but not more than 5 % of copper, and0,2 % or more but not more than 6 % of magnesium, and0,10 % or more but not more than 7 % of zinc, andnot more than 1 % of manganese,consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process0 %m31.12.2024
0.5487ex76071190ex760711904757Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %0 %—31.12.2021
0.4050ex7607119060Plain aluminium foil with the following parameters:an aluminium content of 99,98 % or more,a thickness of 0,070 mm or more but not more than 0,125 mm,with a cubic texture,of a kind used for high voltage etching0 %—31.12.2021
0.5312ex76071990ex850790801080Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:a width of 595 mm or more but not more than 605 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries0 %—31.12.2021
0.7698ex7607209010Aluminium foil, in rolls:coated with polypropylene on one side and with polyamide on the other side with adhesive layers betweenwith a width of 200 mm or more, but not more than 400 mm,with a thickness of 0,138 mm or more, but not more than 0,168 mm,for use in the manufacture of lithium-ion battery cell pouches3,7 %—31.12.2020
0.7746ex7608208120Seamless aluminium alloyed extruded tubes (Aluminium 6061F according to standard ASTM B241) with:an outer diameter of 320 mm or more but not more than 400 mm, anda wall thickness of 8 mm or more but not more than 10 mm,for use in the manufacture of high pressure vessels0 %—31.12.2024
0.6138ex7608208930Seamless aluminium alloyed extruded tubes with:an outer diameter of 60 mm or more but not more than 420 mm, anda wall thickness of 10 mm or more but not more than 80 mm0 %—31.12.2023
0.7747ex7608208940Seamless flow forming aluminium alloyed tubes (Aluminium 6061A according to standard ISO 7866) with:an outer diameter of 378 mm or more but not more than 385 mm, anda wall thickness of 4 mm or more but not more than 7 mm,for use in the manufacture of high pressure vessels0 %—31.12.2024
0.2445ex7613000020Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg0 %p/st31.12.2023
0.6583ex76169910ex87089910ex87089997306050Aluminium engine bracket, with dimensions of:height of more than 10 mm but not more than 200 mm,width of more than 10 mm but not more than 200 mm,length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:internal porosity not more than 1 mm,outer porosity not more than 2 mm,Rockwell hardness HRB 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles0 %p/st31.12.2024
0.3928ex7616999015Honeycomb aluminium blocks for use in the manufacture of aircraft parts0 %p/st31.12.2023
0.6534ex7616999025Metallised film:consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,with an optical density of each aluminium layer of not more than 3.0,with each aluminium layer separated by a resin layer,on a carrier film of PET, andon rolls of up to 50000 metres in length0 %—31.12.2024
0.5357ex76169990ex84828000ex88033000701040Connecting components for use in the production of helicopter tail rotor shafts0 %p/st31.12.2021
0.6730ex8101960010Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μm,a resistance of 40 Ω or more but not more than 300 Ω at length of 1 m0 %—31.12.2020
0.7245ex8101960020Tungsten wirecontaining by weight 99,95 % or more of tungsten, andwith a maximum cross-sectional dimension of not more than 1,02 mm0 %—31.12.2022
0.5694ex8102100010Molybdenum powder with:a purity by weight of 99 % or more, anda particle size of 1,0 μm or more, but not more than 5,0 μm0 %—31.12.2022
0.6450ex8103909010Tantalum sputtering target with:a copper-chromium alloy backing plate,a diameter of 312 mm, anda thickness of 6,3 mm0 %p/st31.12.2024
0.5097ex8104300035Magnesium powder:of purity by weight of more than 99,5 %,with a particle size of 0,2 mm or more but not more than 0,8 mm0 %—31.12.2020
0.3417ex8104900010Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light0 %—31.12.2023
0.5838ex8105900010Bars or wires made of cobalt alloy containing by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium, and7 % (± 2 %) iron,conforming to the material specifications AMS 58420 %—31.12.2023
0.3416ex8108200010Titanium sponge0 %—31.12.2023
0.4553ex8108200030Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm0 %—31.12.2023
0.6942ex8108200040Titanium alloy ingot:with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 6 % of aluminium,2,5 % or more but not more than 5 % of tin,2,5 % or more but not more than 4,5 % of zirconium,0,2 % or more but not more than 1 % of niobium,0,1 % or more but not more than 1 % of molybdenum,0,1 % or more but not more than 0,5 % of silicon0 %p/st31.12.2020
0.6943ex8108200055Titanium alloy ingot:with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 7 % of aluminium,1 % or more but not more than 5 % of tin,3 % or more but not more than 5 % of zirconium,4 % or more but not more than 8 % of molybdenum0 %p/st31.12.2020
0.6944ex8108200060Titanium alloy ingot,with a diameter of 63,5 cm or more and a length of 450 cm or more,a weight of 6350 kg or more,containing alloy elements by weight of:5,5 % or more but not more than 6,7 % of aluminium,3,7 % of more but not more than 4,9 % of vanadium0 %p/st31.12.2020
0.7310ex8108200070Titanium alloy slab, with:a height of 20,3 cm or more, but not more than 23,3 cm,a length of 246,1 cm or more, but not more than 289,6 cm,a width of 40,6 cm or more, but not more than 46,7 cm,a weight of 820 kg or more but not more than 965 kg,containing alloy elements by weight of:5,2 % or more but not more than 6,2 % of aluminium,2,5 % or more but not more than 4,8 % of vanadium0 %p/st31.12.2022
0.3211ex8108300010Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium0 %—31.12.2023
0.4363ex8108903010Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 650400 %—31.12.2024
0.7330ex8108903015Rods and wire of an alloy of titanium with:a uniform solid cross-section in the form of a cylinder,with a diameter of 0,8 mm or more, but not more than 5 mm,an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,a silicon content by weight of 0,3 % or more, but not more than 0,6 %,a niobium content by weight of 0,1 or more, but not more than 0,3 %, andan iron content by weight of not more than 0,2 %0 %—31.12.2022
0.4904ex8108903025Titanium-aluminium-vanadium alloy (TiAl6V4) bars, rods and wire, complying with AMS standards 4928, 4965 or 49670 %—31.12.2020
0.7077ex8108903060Forged cylindrical bars of titanium with:a purity of 99,995 % by weight or more,a diameter of 140 mm or more but not more than 200 mm,a weight of 5 kg or more but not more than 300 kg0 %p/st31.12.2021
0.5351ex8108903070Wire of an titanium alloy containing by weight:22 % (± 1 %) of vanadium, and4 % (±0,5 %) of aluminium,or:15 % (± 1 %) of vanadium,3 % (±0,5 %) of chromium,3 % (±0,5 % of tin, and3 % (±0,5 %) of aluminium0 %—31.12.2021
0.7285ex8108905045Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:a thickness of 0,4 mm or more, but not more than 100 mm,a length of not more than 14 m, anda width of not more than 4 m0 %—31.12.2022
0.5352ex8108905055Plates, sheets, strip and foil of an alloy of titanium0 %—31.12.2021
0.6524ex8108905080Plates, sheets, strips and foil of non-alloyed titanium:of a width of more than 750 mm,of a thickness of not more than 3 mm0 %—31.12.2024
0.6500ex8108905085Strip or foil of non-alloyed titanium:containing more than 0,07 % by weight of oxygen (O2),of a thickness of 0,4 mm or more but not more than 2,5 mmconforming to the Vickers hardness HV1 standard of not more than 170,of a kind used in the manufacture of welded tubes for nuclear power plant condensers0 %—31.12.2024
0.7293ex8108906030Seamless tubes and pipes of titanium or an alloy of titanium with:a diameter of 19 mm or more but not more than 159 mm,a wall thickness of 0,4 mm or more but not more than 8 mm, anda maximum length of 18 m0 %—31.12.2022
0.5353ex81089090ex900390003020Parts of spectacle frames and mountings, includingtemples,blanks of a kind used for the manufacture of spectacle parts, andbolts of the kind used for spectacle frames and mountings,of a titanium alloy0 %p/st31.12.2021
0.2515ex8109200010Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry0 %—31.12.2023
0.3415ex8110100010Antimony in the form of ingots0 %—31.12.2023
0.3413ex8112993010Alloy of niobium (columbium) and titanium, in the form of bars and rods0 %—31.12.2023
0.5354ex8113002010Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide0 %—31.12.2023
0.4316ex8113009010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %—31.12.2022
0.6805ex8113009020Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules0 %—31.12.2020
0.6416ex8207191010Inserts for drilling tools with working parts of agglomerated diamonds0 %p/st31.12.2024
0.5570ex8207301010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles0 %p/st31.12.2022
0.7693ex8301200010Mechanical or electromechanical steering column lock:with a height of 10,5 cm (± 3 cm),with a width of 6,5 cm (± 3 cm),in a metal housing,whether or not with a holder,for use in the manufacture of goods of Chapter 870 %—31.12.2023
0.5024ex83016000ex84199085ex84799070ex84819000ex85030099ex85159080ex85371098ex85389099ex87089910ex8708999730403050434055705522Silicone or plastic keyboards, comprising:parts of common metal, andwhether or not comprising parts of plastic,epoxy resin reinforced with fibreglass or wood,whether or not printed or surface-treated,with or without electrical conductors,with or without a membrane bonded to the keyboard,with or without mono or multilayer protective film0 %p/st31.12.2020
0.6954ex8302200020Castors, with:an external diameter of 21 mm or more but not more than 23 mm,a width with screw of 19 mm or more but not more than 23 mm,a U-shaped plastic outer ring,an assembly screw fitted to the internal diameter and used as an inner ring0 %p/st31.12.2020
0.7666ex8302300010Support bracket for an exhaust system:with a thickness of 0,7 mm or more but not more than 1,3 mm,of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,whether or not with mounting holes,for use in the manufacture of exhaust systems for automobiles0 %—31.12.2023
0.2602ex8309909010Aluminium can ends:with a diameter of 99,00 mm or more but not more than 136,5 mm (±1mm),whether or not with a 'ring-pull' aperture0 %p/st31.12.2023
0.3947ex8401300020Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors0 %—31.12.2023
0.6319ex8401400010Stainless steel absorber control rods, filled with neutron absorbing chemical elements0 %p/st31.12.2024
0.3830ex84073320ex84073380ex84079080ex8407909010101010Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of:lawn mowers of subheadings 843311, 843319 and 843320,tractors of subheadings 87019190, 87019290 whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cm3 of subheading 84332010, orsnowploughs and snow blowers of subheading 8430200 %—31.12.2022
0.3828ex8407901010Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 85080 %—31.12.2021
0.4996ex8407909020Compact Liquid Petroleum Gas (LPG) Engine System, with:6 cylinders,an output of 75 kW or more, but not more than 80 kW,inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 84270 %—31.12.2020
0.2598ex8408904120Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %—31.12.2023
0.2595ex8408904320Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %—31.12.2023
0.5544ex84089043ex84089045ex840890474030504 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:a capacity of not more than 3850 cm3, anda rated output of 15 kW or more but not more than 85 kW,for use in the manufacture of vehicles of heading 84270 %—31.12.2022
0.7027ex8409910040Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark‐ignition internal combustion piston engines of motor vehicles0 %—31.12.2021
0.6752ex84099100ex840999005055Exhaust manifold with turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm0 %p/st31.12.2023
0.7670ex8409910025Air intake module for engine cylinders consisting of:a suction pipe,a pressure sensor,an electric throttle,hoses,brackets,for use in the manufacture of engines of motor vehicles0 %—31.12.2023
0.7661ex8409910070Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:a width of 40 mm or more but not more than 70 mm,valves length of 250 mm or more but not more than 350 mm,air volume of 5,2 litres, andan electrical flow control system that provides maximum performance at more than 3200 rpm0 %—31.12.2023
0.5199ex84099900ex847990701085Injectors with solenoid valve for optimised atomisation in the engine combustion chamber0 %p/st31.12.2021
0.7851ex8409990025Hoses assembly for fuel return from injectors to engine fuel unit, consisting of at least:three rubber hoses, whether or not with a protective braided sleeving,three connectors for connecting fuel injectors,five metal clamps,one T-shaped plastic joint,for use in the manufacture of engines of motor vehicles0 %—31.12.2024
0.7160ex8409990040Plastic or aluminium cylinder head cover with:a camshaft position sensor (CMPS),metal brackets for mounting on an engine, andtwo or more gaskets,for use in the manufacture of engines of motor vehicles0 %p/st31.12.2021
0.7236ex8409990060Intake manifold for air supply to the engine cylinders, comprising at least:a throttle,a boost pressure sensor,for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2022
0.7667ex8409990065The exhaust gas recirculation assembly consisting of:a control unit,an air throttle,an intake pipe,an outlet hose,for use in the manufacture of diesel engines of motor vehicles0 %—31.12.2023
0.7234ex8409990070Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2021
0.7718ex8409990075High pressure fuel rail of galvanised ferrite-pearlite steel with:at least one pressure sensor and one valve,a length of 314 mm or more, but not more than 322 mm,an operating pressure not more than 225 MPa,an inlet temperature not more than 95 °C,ambient temperature of – 45 °C or more, but not more than 145 °C,for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2024
0.7233ex8409990080High pressure oil jet nozzle for engine piston cooling and lubrication with:an opening pressure of 1 bar or more, but not more than 3 bar,a closing pressure of more than 0,7 bar,a one-way valve,for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2022
0.7716ex8409990085Turbocharger cooling duct containing:an aluminum alloy duct with at least one metal holder and at least two mounting holes,a rubber pipe with clips,a stainless steel flange highly resistant to corrosion [SUS430JIL],for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2024
0.6751ex8411990020Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,with a heat-resistance of not more than 1100 °C,with a diameter of 28 mm or more, but not more than 180 mm,with a height of 20 mm or more, but not more than 150 mm0 %p/st31.12.2022
0.7225ex8411990030Turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm0 %p/st31.12.2021
0.5975ex8412390020Actuator for a single-stage turbocharger:whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm,with a length of not more than 350 mm,with a diameter of not more than 75 mm,with a height of not more than 110 mm0 %p/st31.12.2023
0.7161ex8413302030Single-cylinder radial-piston high pressure pump for gasoline direct injection with:an operating pressure of 200 bar or more, but not more than 350 bar,a flow control, anda pressure relief valve,for use in the manufacture of engines of motor vehicles0 %—31.12.2021
0.4903ex8413703520Single phase centrifugal pump:discharging at least 400 cm3 fluid per minute,with a noise level limited to 6 dBA,with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, andworking at ambient temperatures down to -10 °C0 %—31.12.2020
0.6346ex8413910030Fuel pump cover:consisting of aluminium alloys,with a diameter of 38 mm or 50 mm,with two concentric, annular grooves formed on its surface,anodized,of a kind used in motor vehicles with petrol engines0 %p/st31.12.2024
0.7669ex8414102530Tandem pump consisting of:an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1000 revolutions per minute,vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of ‐666 mbar in 6 seconds at 750 revolutions per minute,for use in the manufacture of engines of motor vehicles0 %—31.12.2023
0.7691ex8414108930Electric vacuum pump with:Controller Area Network (CAN bus),whether or not with a rubber hose,a connecting cable with connector,a mounting bracket,for use in the manufacture of goods of Chapter 870 %—31.12.2023
0.4727ex8414308150Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment0 %—31.12.2024
0.6160ex84143081ex841480736030Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants:driven by 'on-off' single phase alternate current (AC) or 'brushless direct current' (BLDC) variable speed motors,with a nominal power rating of not more than 1,5 kW,of a kind used in the production of household heat pump laundry tumble dryers0 %—31.12.2023
0.2593ex8414308920Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW0 %—31.12.2023
0.7694ex8414308930Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 870 %—31.12.2023
0.4891ex8414592540Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 85280 %—31.12.2020
0.7595ex8414593520Radial fan, with:a dimension of 25mm (height) x 85mm (width) x 85mm (depth),a weight of 120 g,a rated voltage of 13,6 VDC (direct current voltage),an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),a rated current of 1,1 A (TYP),a rated power of 15 W,a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow),an air flow of not more than 17,5 litre/s,an air pressure of not more than 16 mm H2O ≈ 157 Pa,an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), anda FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems0 %—31.12.2023
0.7317ex84148022ex841480802020Air membrane compressor with:a flow of 4,5 l/min or more, but not more than 7 l/min,power input of not more than 8,1 W, anda gauge pressure capacity not exceeding 400 hPa (0,4 bar),of a kind used in the production of motor vehicle seats0 %—31.12.2022
0.2507ex8414900020Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles0 %p/st31.12.2024
0.3386ex8414900030Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles0 %p/st31.12.2023
0.4027ex8414900040Drive part, for compressors of air conditioning machines of motor vehicles0 %p/st31.12.2023
0.6841ex8415900030Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with:a length of 166 mm (+/- 1 mm),a diameter of 70 mm (+/- 1 mm),an internal capacity of 280 cm3 or more,a water absorption rate of 17 g or more, andan internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2,of a kind used in car air-conditioning systems0 %p/st31.12.2020
0.6842ex8415900040Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems0 %p/st31.12.2020
0.6860ex8415900055Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with:a length of 143 mm or more but not more than 292 mm,a diameter of 31 mm or more but not more than 99 mm,a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, anda solid particle diameter of not more than 0,06 mm,of a kind used in car air-conditioning systems0 %p/st31.12.2020
0.4133ex8418991070Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles0 %p/st31.12.2021
0.6231ex8421210020Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:ultrafiltration system,carbon filtration system,water softener system,for use in a biopharmaceutical laboratory0 %p/st31.12.2024
0.3375ex8421999091Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0 %p/st31.12.2023
0.7039ex8424897020Mechanical passenger car headlights washer with telescopic hose, high pressure nozzles and mounting clamps for use in the manufacture of goods of Chapter 870 %—31.12.2021
0.5831ex8431200030Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 84270 %p/st31.12.2022
0.6193ex8431200040Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 84270 %p/st31.12.2023
0.6821ex8436990010Part containing:a single-phase AC motor,an epicyclic gearing,a cutter blade,and whether or not containing:a capacitor,a part fitted with a threaded bolt,for use in the manufacture of garden shredders0 %p/st31.12.2020
0.3374ex8439990010Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more0 %p/st31.12.2023
0.2599ex8477809910Machines for casting or for surface modification of plastic membranes of heading 39210 %p/st31.12.2023
0.7517ex8479899735Mechanical unit ensuring the movement of the camshaft with:8 oil chambers,a phasing range of at least 38°, but not more than 62°,a steel and/or steel alloy sprocket,a steel and/or steel alloy rotor0 %—31.12.2023
0.6230ex8479899760Bioreactor for biopharmaceutical cell culture:having interior surfaces of austenitic stainless steel, andwith a process capacity up to 15000 litres,whether or not combined with a 'clean-in-process' system and/or a dedicated paired media hold vessel0 %p/st31.12.2021
0.6573ex8479899770Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy0 %p/st31.12.2024
0.6735ex8479899785High Pressure Hard Materials Compression Press ('Link Press'):with a 16000 tonne pressure rating,with a 1100mm diameter Bolster (± 1mm),with a 1400mm main cylinder (± 1mm),with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system,with a double arm manipulator arrangement and connections for piping and electrical systems,with a total weight 310 tonnes (± 10 tonnes), andcreating 30000 atmospheres at 1500 degrees centigrade using Low Frequency Alternating Current (16000 amps)0 %p/st31.12.2020
0.7158ex8479907087Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles0 %p/st31.12.2021
0.7375ex8481109920Electromagnetic pressure reducing valve:with a plunger,with at least 275 mPa internal tightness,with a plastic connector with 2 silver or tin pins0 %—31.12.2022
0.7424ex8481109940Pressure reducing valves in a brass case with:a length of not more than 30 mm (± 1 mm),a width of not more than 18 mm (± 1 mm),of a kind used for incorporation in fuel delivery modules of motor vehicles0 %—31.12.2022
0.4668ex8481309191Steel check (non-return) valves with:an opening pressure of not more than 800 kPa,an external diameter not more than 37 mm0 %p/st31.12.2024
0.7850ex8481309930Brake booster check valve assembly, containing at least:three vulcanized rubber hoses,one membrane valve,two metal clamps,one metal holder,whether or not a connecting metal pipe,for use in the manufacture of motor vehicles0 %—31.12.2024
0.3363ex8481805910Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines0 %p/st31.12.2023
0.7155ex8481805920Pressure regulating valve for incorporation into compressors of motor vehicle air condition units0 %p/st31.12.2021
0.7380ex8481805930Two-way flow control valve with housing, with:at least 5, but not more than 10 outlet holes with at least 0,09 mm, but not more than 0,2 mm diameter,at least 550 cm3/minute, but not more than 2000 cm3/minute flow rate,at least 19, but not more than 300 MPa operating pressure0 %—31.12.2022
0.7377ex8481805940Flow-control valve:made of steel,with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,with chromium nitride coating,with a surface roughness of Rp 0,40 %—31.12.2022
0.7381ex8481805950Electromagnetic valve for quantity control with:a plunger,a solenoid with a of coil resistance of 1,85 Ω or more, but not more than 8,2 Ω0 %—31.12.2022
0.7382ex8481805960Electromagnetic valve for quantity control:with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH0 %—31.12.2022
0.5575ex8481806960Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valve,a brass valve body including valve slider and copper connections,with a working pressure up to 4,5 MPa0 %p/st31.12.2022
0.7519ex84818073ex848180992070Pressure- and flow-control valve controlled by external electromagnet:made of steel and/or steel alloy(s),without integrated circuit,of not more than 1000 kPa operating pressure,with a flow quantity of not more than 5 l/min,without an electromagnet0 %—31.12.2023
0.7637ex84818079ex848180993030Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:a withstanding pressure of the valve body of 6,3 MPa,a leakage ratio of less than 1,6 g/a,an impurity ratio of less than 1,2 mg/PCS,an airtight pressure of the valve body of 4,2 MPa,for use in the manufacture of air conditioners0 %—31.12.2023
0.7518ex8481900040Valve armature:for the opening and closing of the flow of fuel,consisting of a shaft and a blade,with 8 holes on the blade,made of metal and/or metal alloy(s)0 %—31.12.2023
0.6391ex84821010ex84821090ex84825000101010Ball and cylindrical bearings:with an outside diameter of 28 mm or more but not more than 140 mm,with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa,for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants0 %p/st31.12.2024
0.7735ex8482101015Ball bearings with:an internal diameter of 4 mm or more but not more than 9 mm,an external diameter of not more than 26 mm,a width of not more than 8 mm,for use in the manufacture of electromotors with a range of 40000 rpm or more but not more than 80000 rpm0 %—31.12.2024
0.7707ex84821010ex848210902540Double row ball bearings / ball bearing cartridges:with an internal diameter of 3 mm or more, but not more than 9 mm,with an external diameter of 17 mm or more, but not more than 36 mm,with a width of 6 mm or more, but not more than 69 mm,manufactured according to ISO standard 492 - Class 5 or DIN 620 - P5 or ANSI Standard 20 - ABEC 5,with ceramic balls,for use in turbo compressors (turbochargers)0 %—31.12.2024
0.5744ex84833032ex848330383060Bearing housing of a kind used in turbochargers:of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,with oil chambers,without bearings,with a diameter of 50 mm or more, but not more than 250 mm,with a height of 40 mm or more, but not more than 150 mm,whether or not with water chambers and connectors0 %p/st31.12.2022
0.5202ex8483402950Gear set of cycloid gear type with:a rated torque of 50 Nm or more but not more than 9000 Nm,standard ratios of 1:50 or more but not more than 1:475,lost motion of not more than one arc minute,an efficiency of more than 80 %,of a kind used in robot arms0 %p/st31.12.2021
0.5977ex8483402960Epicyclic gearing, of a kind used in driving hand-held power tools with:a rated torque of 25 Nm or more, but not more than 70 Nm,standard gear ratios of 1:12.7 or more, but not more than 1:64.30 %p/st31.12.2023
0.2503ex8483405120Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 843311510 %p/st31.12.2023
0.7920ex8483405930Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of lawn mowers of Subheadings 843311 and 843319 or other mowers of Subheading 8433200 %p/st31.12.2024
0.2706ex84834059ex870899972012Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of lawn mowers of subheadings 843311 and 843319, other mowers of subheading 843320, or tractors of subheadings 87019190, and 87019290, whose main function is that of a lawn mower0 %p/st31.12.2023
0.7249ex8483409020Hydrostatic transmission with:measurements (without shafts) of not more than 154 mm x 115 mm x 108 mm,a weight of not more than 3,3 kg,a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,a torque of the output shaft of not more than 10,4 Nm,a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, andan operating temperature range of -5 °C or more, but not more than +40 °Cfor use in the manufacture of hand-operated lawn mowers of subheading 843311900 %p/st31.12.2022
0.7248ex8483409030Hydrostatic transmission with:a reduction of 20,63:1 or more, but not more than 22,68:1,an input speed of 1800 rpm or more when loaded and of not more than 3000 rpm when unloaded,a continuous output torque of 142 Nm or more, but not more than 156 Nm,an intermittent output torque of 264 Nm or more, but not more than 291 Nm, andan axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm,whether or not equipped with a fan impeller or with a pulley with integrated fan impeller,for use in the production of self-propelled lawn mowers with a seat of subheading 84331151, and tractors of subheading 87019190, whose main function is that of a lawn mower0 %p/st31.12.2022
0.4997ex8483409080Transmission gearbox, with:not more than 3 gears,an automatic deceleration system, anda power reversal system,for use in the manufacture of goods of heading 84270 %p/st31.12.2020
0.7156ex8484200010Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units0 %p/st31.12.2021
0.7604ex8484200020Mechanical face sealing device made of two movable rings (one ceramic mating with a thermal conductivity lower than 80 W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side0 %—31.12.2023
0.6854ex8501101020Synchronous motor for a dishwasher with a water flow control mechanism with:a length without axle of 24 mm (+/- 0,3),a diameter of 49,3 mm (+/- 0,3),a rated voltage of 220 V AC or more but not more than 240 V AC,a rated frequency of 50 Hz or more but not more than 60 Hz,an input power of not more than 4 W,a rotation speed of 4rpm or more but not more than 4,8 rpm,an output torque of not less than 10 kgf/cm0 %—31.12.2020
0.7601ex8501101030Motors for air pumps, with:operating voltage of 9 VDC or more but not more than 24 VDC,operating temperature range of -40°C or more but not more than 80°C,an output not exceeding 18 W,for use in the manufacture of pneumatic support and ventilation systems for car seats0 %—31.12.2023
0.7857ex8501101040Synchronous hybrid stepper motor with:an output not exceeding 18 W,two phases,a rated current of not more than 2,5 A/phase,a rated voltage of not more than 20 V,with or without a threaded shaft,for use in the manufacture of 3D printers0 %—31.12.2024
0.7197ex8501109956DC Motor:with a speed rotation of not more than 7000 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximum power of 13,78 W ( at 3,09 A),with a specified temperature range from -40 °C to 160 °C,with a gear connection,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 100 Nm0 %—31.12.2021
0.6858ex8501109957DC motor:with a rotor speed of not more than 6500 rpm when not loaded,with a rated voltage of 12,0 V (+/- 0,1),of a specified temperature range of – 40 °C or more, but not more than + 165 °C,with or without a connecting pinion,with or without an engine connector0 %—31.12.2020
0.7198ex8501109958DC Motor:with a speed rotation of not more than 6500 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximal power below than 20 W,with a specified temperature range from -40°C to 160°C,with a worm gear drive,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 75 Nm0 %—31.12.2021
0.5846ex8501109960DC motor:with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded,with a power supply voltage of 100 V or more but not more than 240 V,for use in the manufacture of electric fryers0 %—31.12.2022
0.6880ex8501109965Electric turbocharger actuator, with:a DC motor,an integrated gear mechanism,a (pulling)force of 200 N or more at a minimum of 140°C elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 25 mm,with or without an on-board diagnostics interface0 %—31.12.2020
0.6115ex8501109970DC stepping motor, with:an angle of step of 7,5° (± 0,5°),a two-phase winding,a rated voltage of 9 V or more, but not more than 16,0 Vof a specified temperature range covering at least ‐ 40 °C to + 105 °C,with or without connecting pinion,with or without motor drive connector0 %—31.12.2023
0.6627ex8501109975Permanently excited DC motor with:a multiple-phase winding,an external diameter of 28 mm or more but not more than 35 mm,a rated speed of not more than 12000 rpm,a power supply voltage of 8 V or more but not more than 27 V0 %—31.12.2020
0.2838ex8501109979DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20 °C to + 70 °C0 %—31.12.2023
0.4555ex8501109980DC stepping motor, with:an angle of step of 7,5° (± 0,5°),a pull-out torque at 25 °C of 25 mNm or more,a pull-out pulse rate of 1500 pps or more,a two-phase winding, anda rated voltage of 10,5 V or more, but not more than 16,0 V0 %—31.12.2023
0.7250ex8501200030Universal AC/DC motor with:a rated output of 1,2 kW,a supply voltage of 230 V, andengine brake,assembled to a reduction gear with output shaft, which is contained in a plastic housing,for use as electric drive of lawnmower blades0 %—31.12.2022
0.4201ex8501310030DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (±1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)0 %—31.12.2021
0.4731ex8501310037Permanently excited DC motor with:a multiple-phase winding,an external diameter of 30 mm or more but not more than 80 mm,a rated speed of not more than 15000 rpm,an output of 45 W or more but not more than 300 W, anda supply voltage of 9 V or more but not more than 50 V,whether or not with a drive disc,whether or not with a crankcase,whether or not with a fan,whether or not with a cap assembly,whether or not with a sun gear,whether or not with a speed and rotational direction encoder,whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type0 %—31.12.2024
0.5954ex8501310045DC motors, brushless, with:an external diameter of 90 mm or more, but not more than 110 mm,a rated speed of not more than 3680 rpm,an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 °C,a supply voltage of 12 V,a torque of not more than 5,67 Nm,a rotor position sensor,an electronic star-point relay, andfor use with an electric power steering control module0 %—31.12.2023
0.5577ex8501310050DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 9 V or more, but not more than 16 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without a rotor angle position sensor of resolver type or Hall effect type,with or without a pulley,of the kind used in power steering systems for cars0 %—31.12.2022
0.5978ex85013100ex850132005540DC motor with or without commutator, with:an external diameter of 24,2 mm or more, but not more than 140 mm,a rated speed of 3300 rpm or more, but not more than 26200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of more than 37,5 W, but not more than 2400 W,a free load current of not more than 20,1 A,a maximum efficiency of 50 % or more,for driving hand-held power tools or lawn mowers0 %—31.12.2023
0.6809ex85013100ex850132007177Automotive-ready, brushless and permanently excited direct current motor with:a specified speed of not more than 4100 rpm,a minimum output of 400 W, but not more than 1,3 kW (at 12V),a flange diameter of 90 mm or more, but not more than 150 mm,a maximum length of 210 mm, measured from the beginning of the shaft to the outer ending,a housing length of not more than 160 mm, measured from the flange to the outer ending,a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, andsurface magnets0 %—31.12.2020
0.7005ex8501310075Brushless DC motor assembly comprised of a motor and transmission, with:electronic control operating by Hall Effect position sensors,voltage input 9 V or more but not more than 16 V,external diameter of the motor 70 mm or more but not more than 80 mm,output motor power 350 W or more but not more than 550 W,maximum output torque 50 Nm or more but not more than 52 Nm,maximum output rotation speed 280 rpm or more but not more than 300 rpm,coaxial male spline outputs of outer diameter 20 mm (±1 mm), 17 teeth and minimum length of teeth 25 mm (± 1 mm), andwith distance between root of splines 119 mm (± 1 mm),for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
0.4855ex85013300ex85014080ex85015350305010Electric drive for motor vehicles, with an output of not more than 315 kW:with an AC or DC motor with or without transmission,with or without power electronics0 %—31.12.2021
0.5329ex85015100ex850152203050AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with:an output of 340 W or more but not more than 7,4 kW,a flange of dimensions of not more than 180 mm × 180 mm, anda length from flange to extreme end of resolver of not more than 271 mm0 %—31.12.2021
0.6511ex8501535020AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with:a torque output of 200 Nm or more, but not more than 400 Nm,a power output of 50 kW or more, but not more than 200 kW,a rotation speed of no more than 15000 rpm,for use in the manufacture of electric vehicles0 %—31.12.2024
0.6676ex8501612035Fuel cell module, AC generator with an output of 7,5 kVA or less, consisting of:a Hydrogen generator (desulphurizer, reformer and cleaner),a PEM fuel cell stack, andan Inverter,for use as a part in a heating appliance0 %—31.12.2020
0.5633ex8501620030Fuel cell system:consisting of at least phosphoric acid fuel cells,in a housing with integrated water management and gas treatment,for permanent, stationary energy supply0 %—31.12.2022
0.2837ex85030091ex850300993132Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring0 %p/st31.12.2023
0.2836ex8503009931Stamped collector of an electric motor, having an external diameter of not more than 16 mm0 %p/st31.12.2023
0.4599ex8503009933Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2021
0.4601ex8503009934Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2024
0.7496ex8503009937Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with:diameter of the rotor body of 17 mm or more but not more than 37 mm,length of the rotor body of 12 mm or more but not more than 36 mm,shaft length of 52 mm or more but not more than 82 mm0 %—31.12.2023
0.5783ex8503009940Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 85010 %p/st31.12.2022
0.6161ex8503009955Stator for brushless motor, with:an internal diameter of 206,6 mm (±0,5),an external diameter of 265,0 mm (±0,2), anda width of 37,2 mm or more but not more than 47,8 mm,of a kind used in the manufacture of washing machine, washer‐dryer or dryer equipped with direct drive drums0 %p/st31.12.2020
0.6379ex8503009960Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (±0,25 mm)0 %p/st31.12.2024
0.7760ex8503009965Rotor body of stacked electrical sheet having:a diameter of 18 mm or more but not more than 35 mm, anda length of 20 mm or more but not more than 65 mm0 %—31.12.2024
0.7761ex8503009975Stator body of stacked electrical sheet having:an inner diameter of 18 mm or more, but not more than 35 mm,an outer diameter of 35 mm or more, but not more than 65 mm, anda length of 20 mm or more, but not more than 65 mm0 %—31.12.2024
0.7758ex8503009980Steel motor housing having:an inner diameter of 35 mm or more but not more than 65 mm,an outer diameter of 35 mm or more but not more than 70 mm, anda length of 35 mm or more but not more than 150 mm0 %—31.12.2024
0.7549ex8504318015Electrical Transformer with:a capacity of 192 Watts or 216 Watts,dimensions of not more than 27,1 x 26,6 x 18 mm,an operating temperature range of - 40 °C or more, but not more than + 125 °C,three or four inductively coupled copper wire windings, and9 connection pins at the bottom0 %—31.12.2023
0.7548ex8504318025Electrical Transformer with:a capacity of 432 Watts,dimensions of not more than 24 mm x 21 mm x 19 mm,an operating temperature range of - 20 °C or more, but not more than + 85 °C,two windings, and5 connection pins at the bottom0 %—31.12.2023
0.4450ex8504318030Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters0 %—31.12.2023
0.7547ex8504318035Electrical Transformer with:a capacity of 433 Watts,dimensions of not more than 37,3 x 38,2 x 28,5 mm,an operating temperature range of - 40 °C or more, but not more than + 125 °C,four inductively coupled copper wire windings, and13 connection pins at the bottom0 %—31.12.2023
0.5598ex8504318040Electrical transformers:with a capacity of 1 kVA or less,without plugs or cables,for internal use in the manufacture of set top boxes and TVs0 %—31.12.2022
0.7551ex8504318045Electrical Transformer with:a capacity of 0,2 Watts,dimensions of not more than 15 mm x 15,5 mm x 14 mm,an operating temperature range of - 10 °C or more, but not more than + 125 °C,two inductively coupled copper wire windings,5 connection pins at the bottom, anda copper shielding0 %—31.12.2023
0.7000ex8504318050Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry0 %—31.12.2021
0.7764ex8504318055Electrical transformer with:a capacity of 0,24 kVA,an operating temperature range of + 10 °C or more, but not more than + 125 °C,five inductively coupled copper wire windings,11 connection pins at the bottom, anddimensions of not more than 31,3 mm x 37,8 mm x 25,8 mm0 %—31.12.2024
0.7029ex8505110047Articles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:a length of 9 mm or more but not more than 105 mm,a width of 5 mm or more but not more than 105 mm, anda height of 2 mm or more but not more than 55 mm0 %—31.12.2021
0.5584ex8505110050Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,of a kind to be used in the manufacture of electric servomotors for industrial automation0 %p/st31.12.2022
0.7567ex8505110053Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with:a length of 97,5 mm or more, but not more than 225 mm,a diameter of 19 mm or more, but not more than 25 mm0 %—31.12.2023
0.6857ex85051100ex850519905540Flat bars of an alloy of samarium and cobalt with:a length of 30,4 mm (±0,05 mm),a width of 12,5 mm (±0,15 mm),a thickness of 6,9 mm (±0,05 mm), orcomposed of ferrites in the shape of a quarter sleeves with:a length of 46 mm (±0,75 mm),a width of 29,7 mm (±0,2 mm),intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars0 %p/st31.12.2020
0.5585ex8505110063Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with:an external diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation0 %p/st31.12.2022
0.3740ex8505110065Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having:a length of not more than 140 mm,a width of not more than 90 mm, anda thickness of not more than 55 mm,or in the shape of curved rectangle (tile type) having:a length of not more than 75 mm,a width of not more than 40 mm,a thickness of not more than 7 mm, anda radius of curvature of more than 86 mm but not more than 241 mm,or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre0 %p/st31.12.2023
0.7788ex8505110068Blocks made of neodymium, iron and boron, whether or not covered with zinc or an alloy of samarium and cobalt with:a length of 13,8 mm or more but not more than 45,2 mm,a width of 7,8 mm or more but not more than 25,2 mm,a height of 1,3 mm or more but not more than 4,7 mm,for use in the manufacture of permanent magnets0 %—31.12.2024
0.5948ex8505110070Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet:whether or not containing a hole in the centre,with a diameter of not more than 90 mm,of a kind used in car loudspeakers0 %—31.12.2023
0.6347ex8505110075A quarter sleeve intended to become permanent magnet after magnetization:consisting of at least neodymium, iron and boron,with a width of 9,1 mm or more but not more than 10,5 mm,with a length of 20 mm or more but not more than 30,1 mm,of a kind used on rotors for the manufacture of fuel pumps0 %p/st31.12.2024
0.7789ex8505191020Arc segments of permanent magnets of agglomerated ferrite, with:a length of 16,8 mm or more, but not more than 110,2 mm,a width of 14,8 mm or more, but not more than 75,2 mm,a thickness of 4,8 mm or more, but not more than 13,2 mm,for use in the manufacture of electromotor rotors for ventilation and air-conditioning systems0 %—31.12.2024
0.5937ex8505199030Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT0 %—31.12.2023
0.7299ex8505199050Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation:whether or not with bevelled edges,of a length of 27 mm or more but not more than 32 mm (±0,15 mm),of a width of 8,5 mm or more but not more than 9,5 mm (+0,05 mm / -0,09 mm),of a thickness of 5,5 mm or more but not more than 5,8 mm (+ 0/‐ 0,2 mm), andof a weight of 6,1 g or more but not more than 8,3 g0 %p/st31.12.2022
0.7511ex8505199060Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, intended to become permanent magnets after magnetisation, with the following dimensions:a length of 10 mm or more but not more than 100 mm (± 1 mm),a width of 10 mm or more but not more than 100 mm (± 1 mm),a thickness of 2 mm or more but not more than 15 mm (±0,15 mm)0 %—31.12.2023
0.4029ex8505200030Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles0 %p/st31.12.2023
0.6855ex8506501010Lithium cylindrical primary cells with:a diameter of 14,0 mm or more but not more than 26,0 mm,a length of 2,2 mm or more but not more than 51 mm,a voltage of 1,5 V or more, but not more than 3,6 V,a capacity of 0,15 Ah or more, but not more than 5,00 Ah,for use in the manufacture of telemetry and medical devices, electronic meters or remote controls0 %—31.12.2021
0.7416ex8506503010Lithium manganese dioxide cell, with:a diameter of 20 mm or more but not more than 25 mm,a length of 3 mm or more but not more than 6 mm,a voltage of 3 V or more but not more than 3,4 V,a capacity of 200 mAh or more but not more than 600 mAh,an automotive test temperature range from -40 °C to +125 °C,for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS)0 %—31.12.2022
0.2490ex8506509010Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V0 %—31.12.2023
0.2488ex8506509030Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah0 %—31.12.2023
0.5180ex8506900010Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)0 %—31.12.2023
0.7641ex8507600013Prismatic lithium-ion electric accumulators with:a width of 173,0 mm (±0,3 mm),a thickness of 45,0 mm (±0,3 mm),a height 125,0 mm (±0,3 mm),a nominal voltage of 3,67 V (±0,01 V), anda nominal capacity of 94 Ah and/or 120 Ah,for use in the manufacture of rechargeable electric vehicle batteries1,3 %—31.12.2020
0.6685ex8507600015Cylindrical lithium-ion-accumulators or modules with:a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,a nominal voltage of 36 V or more, but not more than 48 V,a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles1,3 %—31.12.2020
0.6625ex8507600017Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:a rated voltage of 12 V,a length of 350 mm or more but not more than 355 mm,a width of 170 mm or more but not more than 180 mm,a height of 180 mm or more but not more than 195 mm,weighing 10 kg or more but not more than 15 kg,a nominal charge of 60 Ah or more, but not more than 80 Ah0 %—31.12.2020
0.7663ex8507600018Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:a length of not more than 1600 mm,a width of not more than 448 mm,a height of not more than 395 mm,a weight of 125 kg or more but not more than 135 kg,a nominal voltage of 280 V or more but not more than 400 V,a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,a charging voltage of 110 V or more but not more than 230 V, andcontaining 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 87031,3 %—31.12.2020
0.7717ex8507600022Integrated battery system in a metal case with holders, consisting of:a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (±0,05 kWh),Battery Management System,a relay,a low voltage converter (DC/DC),at least one connector,for use in the manufacture of hybrid motor vehicles1,3 %—31.12.2020
0.6697ex8507600027Lithium-ion cylindrical accumulator with:a nominal capacity of 10 Ah or more, but not more than 20 Ah,a nominal voltage of 12,8 V (± 0.05) or more, but not more than 15,2 V (±0,05),a power of 128 Wh or more, but not more than 256 Wh,for use in the manufacture of electric bicycle drives0 %—31.12.2020
0.2907ex8507600030Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries1,3 %—31.12.2020
0.6703ex8507600033Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 1000 mm,a width of 100 mm or more, but not more than 1000 mm,a height of 200 mm or more, but not more than 1500 mm,a weight of 75 kg or more, but not more than 200 kg,a nominal capacity of 150 Ah or more, but not more than 500 Ah,a nominal output voltage of 230 V AC (Line to neutral) or a nominal voltage of 64 V (± 10 %)1,3 %—31.12.2020
0.6702ex8507600037Lithium-ion accumulator, with:a length of 1200 mm or more, but not more than 2000 mm,a width of 800 mm or more, but not more than 1300 mm,a height of 2000 mm or more, but not more than 2800 mm,a weight of 1800 kg or more, but not more than 3000 kg,a nominal capacity of 2800 Ah or more, but not more than 7200 Ah1,3 %—31.12.2020
0.5548ex8507600050Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 500 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 75 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda nominal energy of 458 Wh or more, but not more than 2158 Wh1,3 %—31.12.2020
0.5342ex8507600065Cylindrical lithium ion cell with:3,5 VDC to 3,8 VDC,300 mAh to 900 mAh, anda diameter of 10,0 mm to 14,5 mm1,3 %—31.12.2021
0.7888ex8507600068Lithium-ion accumulator in a metal housing with:a length of 173 mm or more but not more than 175 mm,a width of 41,5 mm or more but not more than 43 mm,a height of 85 mm or more but not more than 103 mm,a nominal voltage of 3,6 V or more but not more than 3,75 V, anda nominal capacity of 93 Ah or more but not more than 94 Ah1,3 %—31.12.2024
0.6753ex8507600077Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mm,a width of 935 mm or more, but not more than 1660 mm,a height of 85 mm or more, but not more than 700 mm,a weight of 250 kg or more, but not more than 700 kg,a power of not more than 175 kWh,a nominal voltage of 400 V1,3 %—31.12.2020
0.5356ex8507600075Rectangular lithium-ion-accumulator with:a metal casing,a length of 173 mm (±0,15 mm),a width of 21 mm (±0,1 mm),a height of 91 mm (±0,15 mm),a nominal voltage of 3,3 V, anda nominal capacity of 21 Ah or more0 %—31.12.2021
0.4973ex8507600085Lithium-ion modules for incorporation in lithium-ion rechargeable batteries:of a length of 300 mm or more, but not more than 350 mm,of a width of 79,8 mm or more, but not more than 225 mm,of a height of 35 mm or more, but not more than 168 mm,of a weight of 3,95 kg or more, but not more than 8,85 kg,with a rating of 66,6 Ah or more, but not more than 129 Ah1,3 %—31.12.2020
0.7697ex8507903020Safety Reinforced Separator designed to separate cathode and anode in lithium-ion electric accumulators for motor vehicle batteries for use in the manufacture of lithium-ion electric accumulators for motor vehicle batteries1,3 %—31.12.2020
0.5313ex8507908070Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (±0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric rechargeable batteries0 %p/st31.12.2021
0.5012ex85087000ex853710981096Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W0 %p/st31.12.2020
0.5014ex85087000ex853710982098Electronic circuit cards that:are connected by wire or radio frequency to each other and the motor controller card, andregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)0 %p/st31.12.2020
0.6304ex8511300030Igniter integrated coil assembly with:an igniter,a coil on plug assembly with an integrated mounting bracket,a housing,a length of 90 mm or more but not more than 200 mm (± 5 mm),an operating temperature of - 40 °C or more but not more than 130 °C,a voltage of 10,5 V or more, but not more than 16 V0 %p/st31.12.2024
0.7024ex8511300055Ignition coil:with a length of 50 mm or more, but not more than 200 mm,with an operating temperature of - 40 °C or more, but not more than 140 °C, andwith a voltage of 9 V or more, but not more than 16 V,with or without connection cable,for use in the manufacture of engines of motor vehicles0 %—31.12.2021
0.7025ex8511800020Glow-plug for pre-heating of the diesel engines with:an operating temperature of more than 800 °C,a voltage of 5 V or more, but not more than 16 V,a heating rod containing silicon nitride (Si3N4) and molybdenum disilicide (MoSi2), anda metal housing,for use in the manufacture of diesel engines of motor vehicles0 %—31.12.2021
0.6562ex8512200020Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 870 %p/st31.12.2024
0.6856ex8512200030Lighting module, containing at least:two LEDs,glass or plastic lenses, focusing/scattering the light emitted by the LEDs,reflectors redirecting the light emitted by the LEDs,in an aluminium housing with a radiator, mounted at a bracket with an actuator0 %p/st31.12.2020
0.6503ex8512200040Fog lamp with a galvanised inner surface, containing:a plastic holder with three or more brackets,one or more 12 V bulbs,a connector,a plastic cover,whether or not with a connection cable,for use in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6504ex8512309010Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:coil,magnet,metal membrane,connector,Holder,of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6863ex8512309020Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holder,for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.7361ex8512309030Sound alarm device for protection against burglary into the vehicle:with an operating temperature of - 45 °C or more, but not more than + 95 °C,with a voltage of 9 V or more but not more than 16 V,in a plastic housing,whether or not with a metal holder,for use in the manufacture of motor vehicles0 %—31.12.2022
0.5983ex85124000ex851680201020Car door mirror heating foil:with two electrical contacts,with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),with a protective paper film on both sides0 %—31.12.2023
0.6522ex85142080ex85165000ex85166080101010Cavity assembly comprising at least:a transformer with an input of not more than 240 V and an output of not more than 3000 W,an AC or DC fan motor with an output of not more than 42 watts,a housing made of stainless steel,with or without a magnetron of a microwave output power of not more than 900 W,for use in the manufacture of built-in products of subheadings 8514 2080, 8516 5000 and 8516 60800 %p/st31.12.2024
0.4732ex8516900060Ventilation sub-assembly of an electric deep-fat fryer:fitted with a motor having a power rating of 8 W at 4600 rpm,governed by an electronic circuit,operating at ambient temperatures above 110 °C,fitted with a thermoregulator0 %p/st31.12.2024
0.5845ex8516900070Inner pot:containing side and central openings,of annealed aluminium,with a ceramic coating, heat resistant to more than 200 °C,for use in the manufacture of an electric fryer0 %p/st31.12.2022
0.6521ex8516900080Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of subheadings 85142080, 85165000 and 851660800 %p/st31.12.2024
0.4733ex8521900020Digital video recorder:without a hard disk drive,with or without a DVD-RW drive,with either motion detection or capability of motion detection through IP connectivity via LAN connector,with or without a USB serial port,for use in the manufacture of closed-circuit television (CCTV) surveillance systems0 %—31.12.2024
0.3108ex85258019ex852580913110Camera:of a weight of not more than 5,9 kg,without a housing,of dimensions of not more than 405 mm × 315 mm,with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor,with effective pixels of not more than 5 megapixels,for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks0 %—31.12.2023
0.4735ex8525801960Image scanning cameras, using:a 'Dynamic'- or 'Static overlay lines' system,an output NTSC video signal,a voltage of 6,5 V or more,an illuminance of 0,5 lux or more0 %—31.12.2024
0.6694ex8525801965Cameras using MIPI electrical interface with:an image sensor,an objective (lens),a colour processor,a flexible printed circuit board or a printed circuit board,whether or not capable of receiving audio signals,a module dimension of not more than 15 mm x 15 mm x 15 mm,a resolution of 2 mega pixel or more (1616*1232 pixels and higher),whether or not wired, anda housing,for use in the manufacture of products falling within subheading 85171200 or 847130000 %—31.12.2020
0.4734ex8525801970Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:a sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm,a resolution of up to 640 × 512 pixels,a weight of not more than 400 g,measurements of not more than 70 mm × 86 mm × 82 mm,whether or not in a housing,with automotive- qualified plug, anda deviation of the output signal over the entire work temperature range of not more than 20 %0 %—31.12.2024
0.6316ex8528590020Liquid crystal display colour video monitor assembly mounted on a frame,excluding those combined with other apparatus,comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,used for permanent incorporation or permanent mounting into entertainment systems for vehicles0 %—31.12.2024
0.7715ex8528590030Electronic device with LCD touch screen display powered by a voltage of 12 V or more but not more than 14,4 V, containing:a LCD control processor,a GPS module,a Bluetooth module,an USB port,a radio signal tuner,whether or not containing DAB module,whether or not containing functions for cooperation with E-CALL,whether or not containing an integrated control panel,whether or not containing connectors,for use in the manufacture of goods of Chapter 870 %—31.12.2024
0.6689ex8529906528Electronic assembly comprising a printed circuit board with at least:processors for multi-media applications and video signal processing,FPGA (Field Programmable Gate Array),flash memory,operating memory,with or without USB, HDMI, VGA- and RJ-45 interfaces,sockets and plugs for connecting an LCD-display, an LED lighting and a control panel0 %p/st31.12.2020
0.2434ex85299065ex854890903044Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing0 %p/st31.12.2023
0.4140ex8529906550Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 85280 %p/st31.12.2021
0.4893ex85299065ex852990926553Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module0 %p/st31.12.2020
0.4305ex8529906575Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels0 %p/st31.12.2022
0.3966ex85299092ex854890901560LCD modules:solely consisting of one or more TFT glass or plastic cells,not combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit, andwith or without inverters0 %p/st31.12.2023
0.4890ex8529909225LCD modules, not combined with touch screen facilities, solely consisting of:one or more TFT glass or plastic cells,a die cast heat sink,a backlight unit,one printed circuit board with micro controller, andLVDS (Low Voltage Differential Signalling) interface,for use in the manufacture of radios for motor vehicles0 %p/st31.12.2020
0.7369ex8529909233LCD modules combined with touch screen facilities:solely consisting of one or more TFT cells,with a diagonal measurement of the screen of 10,7 cm or more but not more than 36 cm,with or without LED backlight,with control electronics for pixel addressing only,without an EPROM memory (Erasable Programmable Read-only Memory),with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface,used solely for installation in motor vehicles of Chapter 870 %—31.12.2022
0.6654ex8529909237Fastening and covering ledges of aluminium alloy containing:silicon and magnesium,with a length of 300 mm or more but not more than 2200 mm,specifically shaped for use in the manufacture of TV sets0 %—31.12.2020
0.2425ex8529909242Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 85280 %p/st31.12.2023
0.3198ex8529909243Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply0 %p/st31.12.2023
0.4030ex8529909245Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats0 %p/st31.12.2023
0.4609ex8529909247Area image sensors ('progressive scan' Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel0 %p/st31.12.2024
0.4616ex85299092ex853669904983AC socket with a noise filter, composed of:AC socket (for power cord connection) of 230 V,integrated noise filter composed of capacitors and inductors,cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,whether or not equipped with a metal support, which joins the AC socket to the PDP TV set0 %p/st31.12.2024
0.7489ex8529909251OLED modules, consisting of one or more TFT glass or plastic cells:a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm,with a thickness of not more than 55mm,containing organic material,with control electronic for pixel addressing only,with V-by-One Interface and with or without a plug for power supply,with or without back cover,of a kind used in the manufacture of TV sets and monitors0 %—31.12.2023
0.6343ex8529909255OLED modules, consisting of:one or more TFT glass or plastic cells, containing organic material,with or without combined touch screen facilities, andone or more printed circuit boards with control electronics for pixel addressing,for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 870 %p/st31.12.2024
0.5187ex8529909257Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players0 %p/st31.12.2021
0.6629ex8529909263LCD module:with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,with or without a touch screen,with an LED backlight,with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,with a plug for power supply and CAN and LVDS interfaces,with or without electronic components for dynamic adjustments of colour,in a housing, with or without mechanical, touch‐sensitive or contactless control functions and with or without active cooling system,suitable for installation in motor vehicles of Chapter 870 %p/st31.12.2020
0.5018ex8529909267Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with or without a touch screen,with backlight, micro-controller,with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,whether or not with haptic and acoustical feedback,for use in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
0.5788ex8529909270Rectangular fastening and covering frame:of an aluminium alloy containing silicon and magnesium,with a length of 500 mm or more but not more than 2200 mm,with a width of 300 mm or more but not more than 1500 mm,of a kind used for the production of TV sets0 %p/st31.12.2022
0.6781ex8529909285Colour LCD module in a housing:with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,without touch screen,with a backlight and micro-controller,with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,without a signal processing module,with control electronics for pixel addressing only,with a motorised mechanism for moving the display screen,for permanent installation in vehicles of Chapter 870 %p/st31.12.2020
0.4856ex8535900030Semiconductor module switch in a casing:consisting of an IGBT transistor chip and a diode chip on one or more lead frames,for a voltage of 600 V or 1200 V0 %p/st31.12.2020
0.7048ex8536411020Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less0 %—31.12.2021
0.6180ex8536419040Power relay with:electromechanical and/or electromagnetical switching function,a load current of 3 A or more but not more than 16 A,a coil voltage of 5 V or more but not more than 24 V, anda distance between the connector pins of the load circuit not more than 15,6 mm0 %p/st31.12.2024
0.7049ex8536419050Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with one or two photovoltaic generators and two power MOSFET output switches in a casing with connections for a maximum voltage of 60 volts and a minimum current of 2 amps0 %—31.12.2021
0.7052ex8536490040Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts0 %—31.12.2021
0.7796ex8536490050Relay with:a contact current carrying capacity of 5 A or more but not more than 15 A,a nominal voltage of 80 V or more but not more than 270 V, andouter dimensions of 19 mm x 15,2 mm x 15,5 mm,for use in the manufacture of control boards for household appliances0 %—31.12.2024
0.5795ex8536699051SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 85280 %p/st31.12.2022
0.6849ex8536699060Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors0 %p/st31.12.2020
0.4614ex8536699082Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:a pulse transformer, including a wide-band ferrite core,a common mode coil,a resistor,a capacitor,for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2024
0.5028ex8536699084Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2020
0.5318ex8536699085Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2021
0.5316ex8536699086High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2021
0.5181ex8536700010Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2021
0.7873ex8537109120Electronic assembly containing:a microprocessor,a programmable memory controller and other electronic components mounted on a printed circuit,with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,for use in the manufacture of products of Subheadings 841821, 841829, 842112, 842211, 845011, 845012, 845019, 845121, 845129 and 8516600 %—31.12.2024
0.6864ex8537109150Fuse control module in a plastic housing with mounting brackets comprising:sockets with or without fuses,connecting ports,a printed circuit board with embedded microprocessor, micro switch and relay,of a kind used in the manufacture of goods of chapter 870 %p/st31.12.2020
0.7627ex8537109157Programmable memory control board with:4 or more stepper motor drivers,4 or more outputs with MOSFET transistors,a main processor,3 or more inputs for temperature sensors,for a voltage of 10 V or more but not more than 30 V,for use in the manufacture of 3D printers0 %—31.12.2023
0.7609ex8537109159Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:a printed circuit board with programmable memory controller,one single connector, andworking at 12 V0 %—31.12.2023
0.6163ex85371091ex853710986045Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:an AC power input of 208 V or more but not more than 400 V,a logic power input of 24 V DC,an automatic circuit breaker,a main power switch,internal or external electrical connectors and cables,in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm,of a kind used for manufacturing recycling or sorting machines0 %p/st31.12.2023
0.7610ex8537109163Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:a printed circuit board with programmable memory controller,a metallic housing,one single connector,working at 12 V0 %—31.12.2023
0.7360ex8537109165Electronic control unit for optimal engine performance:with a programmable memory,with a voltage of 8 V or more but not more than 16 V,with at least one composite connector,in a metal housing,whether or not with metal holders,for use in the manufacture of motor vehicles0 %—31.12.2022
0.7660ex8537109167Electronic Engine Control Unit (ECU) with:a printed circuit board (PCB),12 Volts voltage,reprogrammable,a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate),for use in the manufacture of goods of Chapter 870 %—31.12.2023
0.7251ex8537109170Programmable motor memory controller for a voltage not exceeding 1000 V, comprising at least:a printed circuit with active and passive components,an aluminium housing, andmultiple connectors0 %p/st31.12.2022
0.6140ex8537109830Motor bridge ICs without programmable memory consisting of:one or more integrated circuits, not interconnected, on separate lead frames,also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars,mounted in a plastic housing0 %p/st31.12.2023
0.6889ex8537109835Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:2 rotary knobs,27 or more pushbuttons,LED lights,2 integrated circuits for receiving and sending of control signals via the LIN-bus0 %p/st31.12.2020
0.6508ex8537109840Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:a length of 50 mm or more, but not more than 120 mm,a width of 20 mm or more but not more than 40 mm,a height of 30 mm or more, but not more than 120 mm,of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6507ex8537109850Electronic control unit BCM (Body Control Module) comprising:plastic box with printed circuit board and metal holder,with voltage of 9V or more, but not more than 16V,able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6520ex8537109860Electronic assembly consisting of:a microprocessor,light-emitting diode (LED) or liquid crystal display (LCD) indicators,electronic components mounted on a printed circuit,for use in the manufacture of built-in products of subheadings 85142080, 85165000 and 851660800 %p/st31.12.2024
0.7194ex8537109865Lever for control module under the steering wheel:with one or more single or multi-positional electrical switches (push-button, rotary or other),whether or not equipped with printed circuit boards and electrical cables,for a voltage of 9 V or more but not more than 16 V,of a kind used in the manufacture of motor vehicles of Chapter 870 %p/st31.12.2021
0.7171ex8537109875Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:an antenna,a connector,a metal holder,for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.3663ex8537109893Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems0 %p/st31.12.2023
0.6866ex85389091ex853890992050Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,a connection cable with a plug,at least two mounting brackets,whether or not PCB including integrated circuits, diodes and transistors,for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.6397ex85389099ex854720003010Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint0 %p/st31.12.2024
0.6399ex8538909940Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more0 %p/st31.12.2024
0.7195ex8538909960Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 870 %p/st31.12.2021
0.5953ex8538909995Copper base plate, containing more components than Insulated Gate Bipolar Transistor (IGBT) chips and diodes with a voltage of 650 V or more but not more than 1200 V, for use as a heatsink in the manufacture of IGBT modules0 %p/st31.12.2023
0.2580ex8540208091Photomultiplier0 %—31.12.2021
0.3959ex8540710020Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 851650000 %—31.12.2023
0.3445ex8540890091Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0 %—31.12.2023
0.3443ex8540890092Vacuum fluorescent display tube0 %—31.12.2023
0.7409ex8540910020Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having:a graphite carbon shield mounted in a mini-Vogel type system,separate pyrolytic carbon blocks used as heating elements, anda cathode temperature of less than 1800 K at a filament current of 1,26 A0 %—31.12.2022
0.7130ex8543709015Laminated electrochromic film consisting of:two outer layers of polyester,a middle layer of acrylic polymer and silicone, andtwo electric connection terminals0 %—31.12.2021
0.2826ex8543709030Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023
0.7055ex8543709033High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021
0.7053ex8543709034Gallium nitride (GaN) high-frequency amplifier consisting of one or more discrete transistors, one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021
0.2822ex8543709035Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023
0.2590ex8543709045Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing0 %p/st31.12.2023
0.3131ex8543709055Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing0 %p/st31.12.2023
0.2820ex8543709080Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing0 %p/st31.12.2023
0.2816ex8543709085Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023
0.4995ex8543709095Mobile telephone view and control module comprising of:a mains power/ CAN (Controller area network) output socket,a universal serial bus (USB) and audio IN/OUT ports andincorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),for use in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
0.4464ex85442000ex85444290ex85444993102020PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of not more than 0,1 mm (±0,01 mm) and a width of not more than 0,8 mm (±0,03 mm),a distance between conductors of not more than 0,5 mm, anda pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm0 %—31.12.2023
0.6709ex8544200030Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:a coaxial cable,two or more connectors, and3 or more plastic clips for attachment to the dashboard,of a kind used in the manufacture of goods of Chapter 870 %—31.12.2021
0.6194ex8544300030Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following:a travel speed of not more than 24 km/h,a motor speed of not more than 4500 rpm,hydraulic pressure of not more than 25 Mpa,mass of not more than 50 metric tonnes,for use in the manufacture of vehicles of heading 84270 %p/st31.12.2023
0.7006ex8544300035Wire harness:with an operation voltage of 12V,wrapped in tape or covered in plastic convoluted tubing,with 16 or more strands, with all terminals to be tin plated or equipped with connectors,for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
0.6377ex85443000ex854442904040Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box0 %p/st31.12.2024
0.7848ex8544300045Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor – BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars0 %—31.12.2024
0.7847ex8544300055Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars0 %—31.12.2024
0.6710ex85443000ex854442906050Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 870 %—31.12.2020
0.6323ex8544300070Multi-measurement wire harness:of a voltage of 5 V or more but not more than 90 V,capable of transmitting information,for use in the manufacture of vehicles of heading 87110 %p/st31.12.2024
0.6867ex8544300085Extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
0.4980ex8544429010Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (±0,25 V),connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,outer screening shielding,used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits0 %p/st31.12.2023
0.7545ex8544429015PVC isolated flexible eight wire cable with:a length of not more than 2100 mm,an operating voltage of 5 V or more, but not more than 35 V,a temperature resistance of not more than 80 °C,either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end, andat least two stripped and tinned wires on the other end,whether or not with mounted rubber pad with integrated strain relief0 %—31.12.2023
0.7538ex8544429025PVC isolated flexible cable with:a length of not more than 1800 mm,an operating voltage of 5 V or more, but not more than 35 V,a heat resistance of not more than 80 °C,an over-moulded 8 pin MiniFit male connector on one end,either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end,a over-moulded resistor inside the connector, anda moulded strain relief on the cable,whether or not with a over-moulded diode inside a connector0 %—31.12.2023
0.7544ex8544429035PVC isolated flexible six or eight wire cable with:a length of not more than 1300 mm,an operating voltage of 5 V or more, but not more than 35 V,a heat resistance of not more than 80 °C,either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end, andeither an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end0 %—31.12.2023
0.6853ex8544429070Electric conductors:of a voltage of not more than 80 V,with a length of not more than 120 cm,fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors0 %p/st31.12.2020
0.7173ex854442908012-wire connecting cable containing two connectorsof a voltage of 5 V,with a length of not more than 300 mm,for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.2424ex8544499310Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %p/st31.12.2023
0.6861ex8544499330Electric conductors:of a voltage of not more than 80 V,of a platinum-iridium-alloy,coated with poly(tetrafluoroethylene),without connectors,for use in the manufacture of hearing aids, implants and speech processors0 %m31.12.2020
0.5002ex8545909040Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,a thickness of less than 600 μm,a weight of less than 500 g/m20 %m231.12.2020
0.5183ex8548102910Spent lithium-ion or nickel metal hydride electric accumulators0 %—31.12.2023
0.3144ex8548909041Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing0 %p/st31.12.2023
0.3193ex8548909043Contact image sensor0 %p/st31.12.2023
0.3763ex8548909048Optical unit, containing at least:a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm,an optical lens,a 'Recording Photodetector Integrated Circuit' (PDIC),a focussing and tracking actuator0 %p/st31.12.2021
0.3965ex8548909065LCD modules:solely consisting of one or more TFT glass or plastic cells,combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit, andwith or without inverters0 %p/st31.12.2023
0.7165ex87081010ex870810901010Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.6513ex87083010ex87083091ex87083099206010Motor powered brake actuation unit:with a rating of 13,5 V (±0,5V), anda ball screw mechanism to control brake fluid pressure in the master cylinder,for use in the manufacture of electric motor vehicles0 %p/st31.12.2024
0.6590ex87083010ex870830914030Body of disc type brake in BIR ('Ball in Ramp') or EPB ('Electronic Parking Brake') or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.4999ex87083010ex870830915010Drum type parking brake:operating within the service brake disk,with a diameter of 170 mm or more but not more than 195 mm,for use in the manufacture of motor vehicles0 %p/st31.12.2021
0.6502ex87083010ex870830916020Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6707ex87083010ex870830917040Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.6869ex87084020ex870840502010Automatic hydrodynamic gearbox:with a hydraulic torque converter,without transfer box and cardan shaft,whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 870 %p/st31.12.2020
0.7253ex8708402030Automatic gearbox with a hydraulic torque converter with:at least eight gears,an engine torque of 300 Nm or more, andtransverse or longitudinal installation,for use in the manufacture of motor vehicles of heading 87030 %p/st31.12.2022
0.7011ex87084020ex870840504030Gear box assembly with one or two inputs and at least three outputs in cast aluminium housing with overall dimensions (excluding the shafts) of not more than 455 mm (width) x 462 mm (height), 680 mm length, equipped with at least:one exterior-splined output shaft,a rotary switch to indicate gear position,the potential for a differentialfor use in the manufacture of all-terrain or utility task vehicles0 %p/st31.12.2021
0.7383ex87084020ex870840505040Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:cast aluminium body,differential gear,2 electrical motors and gears,with the dimensions of:a width of 280 mm or more but not more than 470 mm,a height of 350 mm or more but not more than 595 mm,a length of 410 mm or more but not more than 690 mm,for use in the manufacture of motor vehicles of Chapter 870 %—31.12.2022
0.7655ex87084020ex870840506050Automatic transmission assembly with rotary gear shifter with:aluminium casting housing,differential gear,9 Speed automatic,electronic range select gear selection system,with dimensions of:a width of 330 mm or more but not more than 420 mm,a height of 380 mm or more but not more than 450 mm,a length of 580 mm or more but not more than 690 mm,for use in the manufacture of the vehicles in heading 870 %—31.12.2023
0.7856ex87084020ex870840507060Manual gearbox in cast aluminium housing for transverse installation with:a width of not more than 480 mm,a height of not more than 400 mm,a length of not more than 550 mm,five gears,a differential gear,an engine torque of 250 Nm or less,for use in the manufacture of motor vehicles of Heading 87030 %—31.12.2024
0.6648ex87085020ex870850992010Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle:of a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg0 %p/st31.12.2020
0.7014ex87085020ex87085099ex87089910ex8708999740307080Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148 mm (± 1 mm) x 213 mm (± 1 mm) x 273 mm (± 1 mm) comprising at least:two electro-magnetic one direction clutches in one cage, working in both directions,an input shaft with outer diameter of 24 mm (± 1 mm), ended with spline of 22,a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 mm, ended with spline of 22 teeth or more but not more than 28 teeth,for use in the manufacture of all-terrain or utility task vehicles0 %p/st31.12.2021
0.7359ex87085020ex87085055ex87085091ex8708509950201040Double flange bearing of 3rd generation, for motor vehicles,with double-row ball bearing,whether or not with impulse (encoder) ring,whether or not with antilock brake system (ABS) sensor,whether or not with mounted screws,for use in the manufacture of goods of chapter 870 %—31.12.2022
0.7581ex87085020ex87085099ex87089910ex8708999760154565Car transfer case with single input and dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 mm × 570 mm × 510 mm, comprising:at least an actuator,whether or not an interior distribution by chain0 %—31.12.2024
0.7692ex87085020ex870850996520Intermediate steel shaft connecting the gearbox with semi-axle with:a length of 300 mm or more but not more than 650 mm,a spline end on both sides,whether or not with a pressed bearing in the case,whether or not with a holder,for use in the manufacture of goods of Chapter 870 %—31.12.2023
0.7593ex87085020ex870850997025Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:an outer diameter of 67,0 mm or more but not more than 84,5 mm,3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,spline with 21 teeth or more but not more than 35,bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves0 %—31.12.2023
0.7640ex87085020ex870850997535Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, andwith a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees0 %—31.12.2023
0.6711ex87088020ex870880351010Upper strut insulator containing:a metal holder with three mounting screws, anda rubber bump,for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.6705ex87088020ex870880912010Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.6704ex87088020ex870880913020Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.7164ex8708809910Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.7607ex8708809920Aluminium suspension link arm, with dimensions of:a height of 50 mm or more but not more than 150 mm,a width of 10 mm or more but not more than 100 mm,a length of 100 mm or more but not more than 600 mm,a mass of 1000 g or more but not more than 3000 g,equipped with at least two bushed holes made of aluminium alloy with the following characteristics:a tensile strength of 200 MPa or more,a strength of 19 kN or more,a stiffness of 5 kN/mm or more but not more than 9 kN/mm,a frequency of 400 Hz or more but not more than 600 Hz0 %p/st31.12.2023
0.6509ex87089120ex870891352010Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6859ex87089120ex870891993030Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:an insulating area flatness of not more than 0,1 mm,a permissible particle quantity of 0,3 mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4 mm, andnot more than 3 pores larger than 0,2 mm,of a kind used in heat exchangers for car cooling systems0 %p/st31.12.2020
0.7231ex87089199ex870899974055Assembly for supplying compressed air, whether or not with a resonator, comprising at least:one solid aluminium tube whether or not with mounting bracket,one flexible rubber hose, andone metal clip,for use in the manufacture of goods of Chapter 870 %—31.12.2022
0.7665ex8708929910Exhaust system inner liner:with a wall thickness of 0,7 mm or more but not more than 1,3 mm,made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,whether or not with mounting holes,for use in the manufacture of exhaust systems for automobiles0 %—31.12.2023
0.7664ex8708929920Pipe for guiding exhaust gases from the combustion engine:with a diameter of 40 mm or more but not more than 100 mm,with a length of 90 mm or more but not more than 410 mm,with a wall thickness of 0,7 mm or more but not more than 1,3 mm,of stainless steel,for use in the manufacture of exhaust systems for automobiles0 %—31.12.2023
0.7696ex8708929930Exhaust system end cover:with a wall thickness of 0,7 mm or more but not more than 1,3 mm,made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,whether or not with inner liner,whether or not with surface treatment,for use in the manufacture of exhaust systems for automobiles0 %—31.12.2023
0.7008ex87089310ex870893901010Mechanically operated clutch for use with an elastomeric belt in a dry environment in a CVT (Continuously Variable Transmission) gear case:designed to be bolted onto a splined shaft of outer diameter 23 mm,with an overall diameter of not more than 266 mm (± 1 mm),comprised of 2 sheaves with tapered faces,sheaves having taper of 13 degrees each,having a main compression spring used to resist displacement between sheaves, andcomprised of a cam or spring to maintain proper belt tension,for use in the manufacture of all-terrain vehicles or utility task vehicles0 %—31.12.2021
0.7007ex87089310ex870893903030Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with:elements that activate the clutch at given rotation and generate (in this way) centrifugal force,shaft ended with 5 or more but not more than 6 degree taper,3 weights, and1 compression spring,for use in the manufacture of all-terrain or utility task vehicles0 %p/st31.12.2021
0.7849ex87089310ex870893904040Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:cruise control reset,electronic parking brake release,start and stop engine management under Idle Stop and Go system (ISG),for use in the manufacture of passenger vehicles0 %—31.12.2024
0.6526ex87089420ex870894351020Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6687ex87089510ex870895991020Inflatable safety cushion of high-strength polyamide fibre:sewn,folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming0 %p/st31.12.2020
0.6688ex87089510ex870895992030Inflatable safety cushion of high strength polyamide fibre:sewn,folded,with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,suitable for cool inflator technology0 %p/st31.12.2020
0.7009ex87089910ex870899971060Six-layer composite fuel tank assembly comprising of:a fuel inlet,a pump flange assembly (PFA),a ventilation with rollover valve mounted on the top of the tank, andthreated holes for PFA assembly,for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
0.7921ex8708999718Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of tractors of Subheadings 87019190 and 87019290, whose main function is that of a lawn mower0 %p/st31.12.2023
0.7444ex87089910ex870899972545Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles0 %—31.12.2023
0.7168ex87089910ex870899973535Holder of front radiator or intercooler whether or not with rubber cushioning for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.7174ex87089910ex870899974025Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
0.7282ex8708999785Electroplated interior or exterior parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,layers of copper, nickel and chromiumfor use in the manufacturing of parts for motor vehicles of heading 8701 to 87050 %p/st31.12.2022
0.6686ex8714109010Motorcycle fork rod inner tubes:of SAE1541 carbon steel,with a hard chromium layer of 20 μm (+ 15 μm/– 5 μm),with a wall thickness of 1,3 mm or more, but not more than 1,6 mm,with an elongation at break of 15 %,perforated0 %p/st31.12.2020
0.6848ex8714109020Radiators of a kind used in motor bikes for fitting of attachments0 %p/st31.12.2020
0.7003ex8714109050Suspension damper tubes:of 7050-t73 aluminium alloy,anodised on the inner surface,with a mean roughness (Ra) of the inner surface of not more than 0,4, anda maximum roughness height (Rt) of the inner surface of not more than 4,00 %—31.12.2021
0.6172ex87149130ex87149130ex87149130253572Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2023
0.6879ex8714961010Pedals, for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2020
0.7421ex87149910ex871499102089Bicycle handlebars:with or without an integrated stem,either made out of carbon fibres and synthetic resin or made of aluminium,for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2022
0.7710ex87149950ex871499501191Derailleur gears, consisting of:rear derailleur and mounting articles,with or without front derailleur,for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2024
0.6878ex8714999030Seat posts, for use in the manufacture of bicycles (including electric bicycles)0 %p/st31.12.2020
0.7708ex8714999040Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2024
0.3191ex9001109010Image reverser made up from an assembly of optical fibres0 %—31.12.2023
0.5358ex9001109030Polymer optical fibre with:a poly(methyl methacrylate) core,a cladding of fluorinated polymer,a diameter of not more than 3,0 mm, anda length of more than 150 m,of a kind used in the manufacture of polymer fibre cables0 %—31.12.2021
0.7101ex90011090ex900190004018Fibre optic plates:uncoated and unpainted,of a length of 30 mm or more, but not more than 234,5 mm,of a width of 7 mm or more, but not more than 28 mm, andof a height of 0,5 mm or more, but not more than 3 mm,of a kind used in dental x-ray systems0 %—31.12.2021
0.6402ex90015041ex900150494040Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses0 %—31.12.2022
0.6401ex9001508030Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses0 %—31.12.2021
0.3139ex9001900035Rear projection screen, comprising a lenticular plastic plate0 %p/st31.12.2023
0.3141ex9001900045Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends0 %p/st31.12.2023
0.4197ex9001900055Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut0 %—31.12.2023
0.4179ex9001900070Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90° and a prism pitch of 50 μm0 %—31.12.2021
0.4883ex9001900085Light guide panel made of poly(methyl methacrylate):whether or not cut,whether or not printed,for use in the manufacture of backlight units for flat screen TVs0 %—31.12.2020
0.6909ex9002110015Infrared lens with motorised focus adjustment:using wavelengths of 3 μm or more but not more than 5 μm,providing a clear picture from 50 m to infinity,with fields of vision sizes of 3° x 2,25° and 9° x 6,75°,with a weight of not more than 230 g,with a length of not more than 88 mm,with a diameter of not more than 46 mm,athermalized,for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes0 %—31.12.2020
0.7590ex9002110018Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:a horizontal field of view range to a maximum of 120 deg,a diagonal field of view range to a maximum of 92 deg,a focal length to a maximum of 7,50 mm,a relative aperture of a maximum of F/2,90,a maximum diameter of 22 mm,of a kind used for the production of CMOS (Complementary metal–oxide-semiconductor) automotive cameras0 %—31.12.2023
0.5692ex9002110020Lenses:measuring not more than 95 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times0 %—31.12.2022
0.7102ex9002110025Infrared optical unit composed of:a monocrystalline silicon lens with a diameter of 84 mm (±0,1 mm), anda monocrystalline germanium lens with a diameter of 62 mm (±0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras0 %—31.12.2021
0.7107ex9002110035Infrared optical unit composed of:a silicon lens with a diameter of 29 mm (±0,05 mm), anda monocrystalline calcium fluoride lens with a diameter of 26 mm (±0,05 mm),assembled on a machined aluminium alloy support, of kind a used for thermal imaging cameras0 %—31.12.2021
0.7103ex9002110045Infrared optical unit:with lenses made of silicon, germanium or chalcogenide glass of a diameter not more than 62 mm (±0,05 mm),whether or not mounted on a machined aluminium alloy support,of a kind used for thermal cameras or IP network cameras0 %—31.12.2021
0.3177ex9002110050Lens unit:having a focal length of 25 mm or more but not more than 150 mm,consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm0 %—31.12.2023
0.7104ex9002110055Infrared optical unit composed of:a germanium lens with a diameter of 11 mm (±0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 14 mm (±0,05 mm), anda silicon lens with a diameter of 17 mm (±0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras0 %—31.12.2021
0.7105ex9002110065Infrared optical unit:with a silicon lens with a diameter of 26 mm (±0,1 mm),mounted on a machined aluminium alloy support,of a kind used for thermal imaging cameras0 %—31.12.2021
0.7106ex9002110075Infrared optical unit composed of:a germanium lens with a diameter of 19 mm (±0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 18 mm (±0,05 mm),a germanium lens with a diameter of 20,6 mm (±0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras0 %—31.12.2021
0.6572ex9002110085Lens assembly with:a horizontal field of view range of 20 deg or more, but not more than 200 deg,a focal length of 1,16 mm or more, but not more than 20 mm,a relative aperture of F/1,2 or more, but not more than F/4, anda diameter of 5 mm or more, but not more than 40 mm,for use in the manufacture of CMOS automotive cameras or in IP network cameras production0 %—31.12.2024
0.3140ex9002900030Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates0 %p/st31.12.2023
0.5807ex9002900040Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material0 %p/st31.12.2022
0.5955ex9025804030Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of:a combination of one or more monolithic application-specific integrated circuits (ASIC), andat least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material0 %p/st31.12.2023
0.6288ex9025804050Electronic semiconductor sensor for measuring at least two of the following quantities:atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three‐dimensional structures on the semiconductor material,of a kind used for incorporation into products of Chapters 84-90 and 950 %p/st31.12.2024
0.6527ex90292031ex902990002030Clustered instrument panel with a microprocessor control board, with or without stepping motors, LED indicators or LCD display showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.3292ex9032890030Electronic controller of electric power steering (EPS controller)0 %p/st31.12.2023
0.4253ex9032890040Digital valve controller for controlling liquids and gases0 %p/st31.12.2022
0.7004ex9032890050Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising:an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals,four pressure transducers,two or more pressure valves,electric interfaces, andseveral connectors for gas lines,suitable for in-situ plasma bonding processes or for multi frequency bond activating processes0 %—31.12.2021
0.5025ex9401908010Ratchet disk for use in the manufacture of reclining car seats0 %p/st31.12.2020
0.6715ex9401908060Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles0 %—31.12.2020
0.4846ex95030075ex950300951010Plastic cable car scale models, whether or not with a motor, for printing0 %p/st31.12.2020
0.6950ex9607201010Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers0 %—31.12.2020
0.6949ex9607209010Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers0 %—31.12.2020
0.3286ex9608910010Non-fibrous plastic pen-tips with an internal canal0 %—31.12.2023
0.3289ex9608910020Felt tips and other porous-tips for markers, without internal canal0 %—31.12.2023
0.2737ex9612101010Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye‐sublimation)0 %—31.12.2023
Loading ...