Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
Modified by
  • Council Regulation (EU) No 722/2014of 24 June 2014amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial productsCorrigendum to Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products(Official Journal of the European Union L 192 of 1 July 2014), 32014R072232014R0722R(01), July 1, 2014
  • Council Regulation (EU) No 1341/2014of 15 December 2014amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32014R1341, December 18, 2014
  • Council Regulation (EU) 2015/982of 23 June 2015amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32015R0982, June 25, 2015
  • Council Regulation (EU) 2015/2449of 14 December 2015amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32015R2449, December 30, 2015
  • Council Regulation (EU) 2016/1051of 24 June 2016amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32016R1051, June 30, 2016
  • Council Regulation (EU) 2016/2390of 19 December 2016amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32016R2390, December 30, 2016
  • Council Regulation (EU) 2017/1134of 20 June 2017amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32017R1134, June 27, 2017
  • Council Regulation (EU) 2017/2467of 21 December 2017amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32017R2467, December 30, 2017
Corrected by
  • Corrigendum to Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011, 32013R1387R(01), October 9, 2014
  • Corrigendum to Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products, 32014R0722R(01), October 9, 2014
Council Regulation (EU) No 1387/2013of 17 December 2013suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
Article 11.The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in the Annex are hereby suspended.2.Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in the Annex.
Article 21.The Commission may at any time review the suspensions for the products listed in the Annex in the following cases:(a)at its own initiative;(b)at the request of Member States.2.The Commission shall review the suspensions for products listed in the Annex during the year preceding the end date for mandatory review provided for in that Annex.
Article 3Where a declaration for release for free circulation is presented for the products in relation to which the supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in "Box 41: Supplementary units" of that declaration using the measurement unit set out in the Annex.
Article 4Regulation (EU) No 1344/2011 is hereby repealed.
Article 5This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 January 2014.
This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX
However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).Only the ad valorem duty is suspended. The specific duty shall continue to apply.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htmThe expression "industrial assembly" refers to the production of new items in an assembly plant or manufacturing plant.A newly introduced measure or a measure with amended conditions.A newly introduced measure or a measure with amended conditions.
CN codeTARICDescriptionRate of autonomous dutySupplementary unitDate foreseen for mandatory review
ex0709591010Fresh or chilled chanterelles for treatment other than simple repacking for retail sale0 %—31.12.2020
ex0710210010Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals0 %—31.12.2018
ex0710809550Bamboo shoots, frozen, not put up for retail sale0 %—31.12.2018
ex0711590011Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry0 %—31.12.2021
ex07123200ex07123300ex07123900101031Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale0 %—31.12.2018
ex0804100030Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries0 %—31.12.2018
ex0810405010Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries0 %—31.12.2018
0811905008119070ex0811909570Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %—31.12.2018
ex0811909520Boysenberries, frozen, not containing added sugar, not put up for retail sale0 %—31.12.2018
ex0811909530Pineapple (Ananas comosus), in pieces, frozen0 %—31.12.2018
ex0811909540Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %—31.12.2018
ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930202020202020Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100,goods of heading 3401, orfatty acids with high purity of heading 29150 %—31.12.2017
ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930202020202020Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100,goods of heading 3401, orfatty acids with high purity of heading 29150 %—31.12.2018
ex1512191010Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture ofconjugated linoleic acid of heading 3823 orethyl- or methyl esters of linoleic acid of heading 29160 %—31.12.2020
ex1515909992Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %—31.12.2018
ex1516209620Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process0 %—31.12.2019
ex1517909910Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)0 %—31.12.2021
ex19019099ex210690983945Preparation in powder form containing by weight:15 % or more but not more than 35 % of wheat derived Maltodextrin,15 % or more but not more than 35 % of whey (milk serum),10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,10 % or more but not more than 30 % of blended, aged spray dried cheese,5 % or more but not more than 15 % of buttermilk and0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid0 %—31.12.2018
ex19023010ex190300001020Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale0 %—31.12.2018
ex2005910010Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg0 %—31.12.2018
ex20079950ex200799508191Acerola puree concentrate, obtained by cooking:of the Genus Malpighia spp.,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry9 %—31.12.2017
ex20079950ex200799508292Acidified banana puree concentrate, obtained by cooking:of the Genus Musa cavendish,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry11,5 %—31.12.2017
ex20079950ex20079950ex20079993839310Mango puree concentrate, obtained by cooking:of the Genus Mangifera spp.,with a sugar content by weight of not more than 30 %for use in the manufacture of products of food and drink industry6 %—31.12.2017
ex20079950ex200799508494Papaya puree concentrate, obtained by cooking:of the Genus Carica spp.,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry7,8 %—31.12.2017
ex20079950ex200799508595Guava puree concentrate, obtained by cooking:of the Genus Psidium spp.,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry6 %—31.12.2017
ex2008939120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries0 %—31.12.2017
ex20079950ex20079950ex20079993839310Mango puree concentrate, obtained by cooking:of the Genus Mangifera spp.,with a sugar content by weight of not more than 30 %for use in the manufacture of products of food and drink industry6 %—31.12.2022
ex20079950ex200799508494Papaya puree concentrate, obtained by cooking:of the Genus Carica spp.,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry7,8 %—31.12.2022
ex20079950ex200799508595Guava puree concentrate, obtained by cooking:of the Genus Psidium spp.,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry6 %—31.12.2022
ex2008939120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries0 %—31.12.2022
ex2008994894Mango puree:not from concentrate,of the genus Mangifera,of a Brix value of 14 or more, but not more than 20used in the manufacture of products of drink industry6 %—31.12.2020
ex20089949ex200899993040Seedless boysenberry puree not containing added spirit, whether or not containing added sugar0 %—31.12.2019
ex20089949ex200899997011Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:more than 6 % of salt concentration,0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate andwhether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995for use in the manufacture of stuffed vine leaves with rice0 %—31.12.2017
ex20089949ex200899997011Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:more than 6 % of salt concentration,0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate andwhether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995for use in the manufacture of stuffed vine leaves with rice0 %—31.12.2022
ex2008999120Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking0 %—31.12.2020
ex20094192ex200941992070Pineapple juice:not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry8 %—31.12.2020
ex2009493091Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than EUR 30 per 100 kg net weight,containing added sugarused in the manufacture of products of food or drink industry0 %—31.12.2019
ex2009813110Cranberry juice concentrate:of a Brix value of 40 or more but not more than 66,in immediate packings of a content of 50 litres or more0 %—31.12.2019
ex20098973ex200989731113Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 13,7 or more but not more than 55,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwith added sugarfor the use in the manufacture of products of food or drink industry0 %—31.12.2019
ex2009897920Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more0 %—31.12.2021
ex2009897930Frozen acerola juice concentrate:with a Brix value of more than 48 but not more than 67,in immediate packings of a content of 50 litres or more0 %—31.12.2018
ex2009897985Acai berry juice concentrate:of the species Euterpe oleracea,frozen,not sweetened,not in powder form,of a Brix value of 23 or more but not more than 32,in immediate packings of a content of 10 kg or more0 %—31.12.2021
ex20098997ex200989972129Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 10 or more but not more than 13,7,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwithout added sugarfor the use in the manufacture of products of food or drink industry0 %—31.12.2019
ex2009899996Coconut waterunfermented,not containing added spirit or sugar, andin immediate packing of a content of 20 litres or more0 %—31.12.2021
ex2106102020Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form0 %—31.12.2018
ex2106102030Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate0 %—31.12.2018
ex2106909245Preparation containing by weight:more than 30 % but not more than 35 % licorice extract,more than 65 % but not more than 70 % tricaprylin,standardised by weight to 3 % or more but not more than 4 % glabridin0 %—31.12.2021
ex2106909250Casein protein hydrolysate consisting of:by weight 20 % or more but not more than 70 % free amino acids, andpeptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da0 %kg31.12.2022
ex2519901010Fused magnesia with a purity by weight of 94 % or more0 %—31.12.2021
ex27075000ex270799802010Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %0 %—31.12.2019
ex2707999910Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 270 %—31.12.2018
ex27101981ex271019991030Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,with a viscosity index of 80 or more0 %—31.12.2018
ex2710199920Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:not more than 1 mg/kg of sulphurmore than 99 % by weight of saturated hydrocarbonsmore than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; anda kinematic viscosity at 40 °C of more than 6,5 mm2/s, ora kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more0 %—31.12.2019
ex2804509010Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % (CAS RN 13494-80-9)0 %—31.12.2018
ex2804509040Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis0 %—31.12.2018
28047000Phosphorus0 %—31.12.2018
ex2805120010Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)0 %—31.12.2020
ex2805199020Lithium metal of a purity by weight of 98,8 % or more (CAS RN 7439-93-2)0 %—31.12.2017
ex2805199020Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more0 %—31.12.2022
ex2805301010Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium0 %—31.12.2018
280530202805303028053040Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more0 %—31.12.2020
ex2811198010Sulphamidic acid (CAS RN 5329-14-6)0 %—31.12.2018
ex2811198020Hydrogen iodide (CAS RN 10034-85-2)0 %—31.12.2021
ex2811198030Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry0 %—31.12.2017
ex2811220010Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %—31.12.2018
ex2811220015Amorphous silicon dioxide (CAS RN 60676-86-0),in the form of powderof a purity by weight of 99,0 % or morewith a median grain size of 0,7 μm or more, but not more than 2,1 μmwhere 70 % of the particles have a diameter of not more than 3 μm0 %—31.12.2020
ex2811220060Calcined amorphous silicon dioxide powderwith a particle size of not more than 20 μm, andof a kind used in the production of polyethylene0 %—31.12.2019
ex2811220070Amorphous silicon dioxide (CAS RN 60676-86-0),in the form of powderof a purity by weight of 99,7 % or morewith a median grain size of 0,7 μm or more, but not more than 2,1 μmwhere 70 % of the particles have a diameter of not more than 3 μm0 %—31.12.2020
ex2811299010Tellurium dioxide (CAS RN 7446-07-3)0 %—31.12.2022
ex2812900010Nitrogen trifluoride (CAS RN 7783-54-2)0 %—31.12.2018
ex2816400010Barium hydroxide (CAS RN 17194-00-2)0 %—31.12.2017
ex2816400010Barium hydroxide (CAS RN 17194-00-2)0 %—31.12.2022
ex2818109120Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:94 % or more, but less than 98,5 % of aluminium oxide,2 % (± 1,5 %) of magnesium oxide,1 % (± 0,6 %) of yttrium oxide,andeither 2 % (± 1,2 %) of lanthanum oxide or2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm0 %—31.12.2020
ex2818200010Activated alumina with a specific surface area of at least 350 m2/g0 %—31.12.2019
ex2818300020Aluminium hydroxide (CAS RN 21645-51-2)in the form of powderwith a purity by weight of 99,5 % or morewith a decomposition point of 263o C or morewith a particle size of 4 μm (± 1 μm)with a Total-Na2O-content by weight of not more than 0,06 %0 %—31.12.2020
ex2818300030Aluminium hydroxide oxide (CAS RN 1318-23-6) in the form of boehmite or pseudoboehmite0 %—31.12.2018
ex2818300030Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)0 %—31.12.2018
ex2819909010Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy0 %—31.12.2021
ex2823000010Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 0,7 μm or more but not more than 2,1 μm0 %—31.12.2017
ex2823000020Titanium dioxide (CAS RN 13463-67-7) with a purity of 99,7 % or more and containing by weight:not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),not more than 0,01 % of phosphorus (expressed as elemental phosphorus),for use in the metallurgy0 %—31.12.2017
ex2825100010Hydroxylammonium chloride (CAS RN 5470-11-1)0 %—31.12.2017
ex2823000010Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 0,7 μm or more but not more than 2,1 μm0 %—31.12.2022
ex2825100010Hydroxylammonium chloride (CAS RN 5470-11-1)0 %—31.12.2022
28253000Vanadium oxides and hydroxides0 %—31.12.2021
ex2825500020Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride0 %—31.12.2018
ex2825500030Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm0 %—31.12.2020
ex2825600010Zirconium dioxide (CAS RN 1314-23-4)0 %—31.12.2017
ex2825600010Zirconium dioxide (CAS RN 1314-23-4)0 %—31.12.2022
ex2825700010Molybdenum trioxide (CAS RN 1313-27-5)0 %—31.12.2021
ex2825700020Molybdic Acid (CAS RN 7782-91-4)0 %—31.12.2021
ex2826199010Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more0 %—31.12.2020
ex2827398510Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %0 %—31.12.2018
ex2827398520Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more0 %—31.12.2021
ex2827398540Barium chloride dihydrate (CAS RN 10326-27-9)0 %—31.12.2018
ex2827499010Hydrated zirconium dichloride oxide0 %—31.12.2018
ex2827600010Sodium iodide (CAS RN 7681-82-5)0 %—31.12.2019
ex2830100010Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight0 %—31.12.2018
ex2833298020Manganese sulphate monohydrate (CAS RN 10034-96-5)0 %—31.12.2018
ex2833298030Zirconium sulphate (CAS RN 14644-61-2)0 %—31.12.2020
ex2835100010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %—31.12.2017
ex2835100010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %—31.12.2022
ex2835100020Sodium hypophosphite (CAS RN 7681-53-0)0 %—31.12.2018
ex2836910020Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:2 mg/kg or more of arsenic,200 mg/kg or more of calcium,200 mg/kg or more of chlorides,20 mg/kg or more of iron,150 mg/kg or more of magnesium,20 mg/kg or more of heavy metals,300 mg/kg or more of potassium,300 mg/kg or more of sodium,200 mg/kg or more of sulphates,determined according to the methods specified in the European Pharmacopœia0 %—31.12.2018
ex2836991730Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more0 %—31.12.2018
ex2837190020Copper cyanide (CAS RN 544-92-3)0 %—31.12.2018
ex2837200010Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)0 %—31.12.2021
ex2837200020Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)0 %—31.12.2017
ex2839190010Disodium disilicate (CAS RN 13870-28-5)0 %—31.12.2017
ex2837200020Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)0 %—31.12.2022
ex2839190010Disodium disilicate (CAS RN 13870-28-5)0 %—31.12.2022
ex2839900020Calcium silicate (CAS RN 1344-95-2)0 %—31.12.2018
ex2840209010Zinc borate (CAS RN 12767-90-7)0 %—31.12.2020
ex2841500010Potassium dichromate (CAS RN 7778-50-9)0 %—31.12.2022
ex2841700010Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)0 %—31.12.2018
ex2841700020Diammonium tridecaoxotetramolybdate(2-) (CAS RN 12207-64-6)0 %—31.12.2019
ex2841700030Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)0 %—31.12.2019
ex2841700040Diammonium dimolybdate (CAS RN 27546-07-2)0 %—31.12.2021
ex2841800010Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)0 %—31.12.2017
ex2841908510Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %0 %—31.12.2017
ex2841800010Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)0 %—31.12.2022
ex2841903010Potassium metavanadate (CAS RN 13769-43-2)0 %kg31.12.2022
ex2841908510Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %0 %—31.12.2022
ex2841908520Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more0 %—31.12.2018
ex2842100010Synthetic beta zeolite powder0 %—31.12.2018
ex2842100020Synthetic chabasite zeolite powder0 %—31.12.2019
ex2842100040Aluminophosphate-eighteen zeolite (CAS RN 1318-02-1) for use in the manufacture of catalytic preparations0 %—31.12.2021
ex2842100040Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations0 %—31.12.2021
ex2842901010Sodium selenate (CAS RN 13410-01-0)0 %—31.12.2019
28451000Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)0 %—31.12.2018
28459010Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0 %—31.12.2018
ex2845909010Helium-3 (CAS RN 14762-55-1)0 %—31.12.2021
ex2845909020Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)0 %—31.12.2018
ex2845909030(13C)Carbon monoxide (CAS RN 1641-69-6)0 %—31.12.2021
ex2845909040Iron boride enriched at a level of more than 95 % by weight with boron-10 (CAS RN 200513-39-9)0 %—31.12.2018
ex28461000ex382499961053Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight0 %—31.12.2018
ex2846100020Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated0 %—31.12.2018
ex2846100030Cerium lanthanum carbonate, whether or not hydrated0 %—31.12.2018
28469010284690202846903028469090Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 284610000 %—31.12.2018
ex2850002010Silane (CAS RN 7803-62-5)0 %—31.12.2018
ex2850002020Arsine (CAS RN 7784-42-1)0 %—31.12.2018
ex2850002030Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm0 %—31.12.2017
ex2850002030Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm0 %—31.12.2022
ex2850002040Germanium tetrahydride (CAS RN 7782-65-2)0 %—31.12.2021
ex2850002050Sodium tetrahydroborate (CAS 16940-66-2) with:a purity by weight of 98 % or more andnot more than 10ppm ironfor use as an additive in the manufacture of oxygen barrier polymer articles0 %—31.12.2017
ex2850002060Disilane (CAS RN 1590-87-0)0 %—31.12.2022
ex2850006010Sodium azide (CAS RN 26628-22-8)0 %—31.12.2018
ex2853909020Phosphine (CAS RN 7803-51-2)0 %—31.12.2018
ex29033919101-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing not more than:0,25 % of Sec-butyl bromide0,06 % of n-butyl bromide0,06 % of n-propyl bromide0 %—31.12.2018
ex29033919205-Bromopent-1-ene (CAS RN 1119-51-3)0 %—31.12.2022
29033921Difluoromethane (CAS RN 75-10-5)0 %—31.12.2020
ex2903392410Pentafluoroethane (CAS RN 354-33-6)0 %—31.12.2019
ex29033926101,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification:not more than 600 ppm by weight of R134 (1,1,2,2-tetrafluoroethane),not more than 5 ppm by weight of R143a (1,1,1-trifluoroethane),not more than 2 ppm by weight of R125 (pentafluoroethane),not more than 100 ppm by weight of R124 (1-chloro-1,2,2,2-tetrafluoroethane),not more than 30 ppm by weight of R114 (1,2-dichlorotetrafluoroethane),not more than 50 ppm by weight of R114a (1,1-Dichlorotetrafluoroethane),not more than 250 ppm by weight of R133a (1-Chloro-2,2,2-Trifluoroethane),not more than 2 ppm by weight of R22 (Chlorodifluoromethane),not more than 2 ppm by weight of R115 (Chloropentafluoroethane),not more than 2 ppm by weight of R12 (Dichlorodifluoromethane),not more than 20 ppm by weight of R40 (Methyl chloride),not more than 20 ppm by weight of R245cb (1,1,1,2,2-pentafluoropropane),not more than 20 ppm by weight of R12B1 (Chlorodifluorobromomethane),not more than 20 ppm by weight of R32 (Difluoromethane),not more than 15 ppm by weight of R31 (Chlorofluoromethane),not more than 10 ppm by weight of R152a (1,1-Difluoroethane),not more than 20 ppm by weight of 1131 (1-Chloro-2 Fluoroethylene),not more than 20 ppm by weight of 1122 (1-Chloro-2,2-Difluoroethylene),not more than 3 ppm by weight of 1234yf (2,3,3,3-Tetrafluoropropene),not more than 3 ppm by weight of 1243zf (3,3,3 Trifluoropropene),not more than 3 ppm by weight of 1122a (1-chloro-1,2-difluoroethylene),not more than 4,5 ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene),not more than 3 ppm by weight of any individual unspecified/unknown chemical,not more than 10 ppm by weight of all unspecified/unknown chemicals combined,not more than 10 ppm by weight of Water,with an acidity level of not more than 0,1 ppm by weight,without Halides,not more than 0,01 % by volume of High Boilers,without any odour (no malodour)for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2)0 %—31.12.2019
ex29033927101,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)0 %—31.12.2018
ex2903392810Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)0 %—31.12.2018
ex2903392820Perfluoroethane (CAS RN 76-16-4)0 %—31.12.2018
ex29033929101H-Perfluorohexane (CAS RN 355-37-3)0 %—31.12.2018
290339312,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)0 %—31.12.2017
ex2903393510Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 1645-83-6)0 %—31.12.2018
290339312,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)0 %—31.12.2022
ex2903393520Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)0 %—31.12.2018
ex2903393910Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)0 %—31.12.2021
ex2903393920(Perfluorobutyl) ethylene (CAS RN 19430-93-4)0 %—31.12.2018
ex2903393930Hexafluoropropene (CAS RN 116-15-4)0 %—31.12.2021
ex29033939401,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2)0 %—31.12.2022
ex29037400102-Chloro-1,1-difluoroethane (CAS RN 338-65-8)0 %—31.12.2020
ex29037760101,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)0 %—31.12.2018
ex2903779010Chlorotrifluoroethylene (CAS RN 79-38-9)0 %—31.12.2021
ex2903793010Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)0 %—31.12.2019
ex29038980101,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9)0 %—31.12.2018
ex2903898040Hexabromocyclododecane0 %—31.12.2021
ex2903898050Chlorocyclopentane (CAS RN 930-28-9)0 %—31.12.2017
ex2903898050Chlorocyclopentane (CAS RN 930-28-9)0 %—31.12.2022
ex2903898060Octafluorocyclobutane (CAS RN 115-25-3)0 %—31.12.2022
ex29039980154-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)0 %—31.12.2020
ex29039980201,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)0 %—31.12.2018
ex29039980402,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:0,001 mg/kg or less of tetrachlorodibenzodioxines,0,001 mg/kg or less of tetrachlorodibenzofurans,0,2 mg/kg or less of tetrachlorobiphenyls0 %—31.12.2018
ex2903998050Fluorobenzene (CAS RN 462-06-6)0 %—31.12.2018
ex29039980753-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)0 %—31.12.2019
ex29039980801-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)0 %—31.12.2018
ex29039980852-Bromo-9H-fluorene (CAS RN 1133-80-8)0 %—31.12.2018
ex2904100030Sodium p-styrenesulphonate (CAS RN 2695-37-6)0 %—31.12.2019
ex2904100050Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)0 %—31.12.2019
ex2904200010Nitromethane (CAS RN 75-52-5)0 %—31.12.2020
ex2904200020Nitroethane (CAS RN 79-24-3)0 %—31.12.2020
ex29042000301-Nitropropane (CAS RN 108-03-2)0 %—31.12.2020
ex29042000402-Nitropropane (CAS RN 79-46-9)0 %—31.12.2019
ex2904910010Trichloronitromethane (CAS RN 76-06-2), for the manufacture of goods of subheading 3808920 %—31.12.2019
ex29049900201-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)0 %—31.12.2019
ex2904990025Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)0 %—31.12.2020
ex2904990030Tosyl chloride (CAS RN 98-59-9)0 %—31.12.2019
ex29049900351-Fluoro-4-nitrobenzene (CAS RN 350-46-9)0 %—31.12.2020
ex29049900404-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)0 %—31.12.2017
ex29049900404-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)0 %—31.12.2022
ex2904990050Ethanesulphonyl chloride (CAS RN 594-44-5)0 %—31.12.2018
ex29049900604,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7)0 %—31.12.2019
ex29049900701-Chloro-4-nitrobenzene (CAS RN 100-00-5)0 %—31.12.2019
ex29049900801-Chloro-2-nitrobenzene (CAS RN 88-73-3)0 %—31.12.2019
ex2905110010Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more0 %—31.12.2018
ex2905110020Methyl methanesulphonate (CAS RN 66-27-3)0 %—31.12.2021
ex29051100ex290519002035Methyl methanesulphonate (CAS RN 66-27-3)0 %—31.12.2021
ex2905190011Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN0 %—31.12.2018
ex2905190020Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7)0 %—31.12.2018
ex2905190025Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)0 %—31.12.2018
ex29051900302,6-Dimethylheptan-4-ol (CAS RN 108-82-7)0 %—31.12.2018
ex29051900402,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)0 %—31.12.2019
ex2905190070Titanium tetrabutanolate (CAS RN 5593-70-4)0 %—31.12.2017
ex2905190080Titanium tetraisopropoxide (CAS RN 546-68-9)0 %—31.12.2017
ex2905190070Titanium tetrabutanolate (CAS RN 5593-70-4)0 %—31.12.2022
ex2905190080Titanium tetraisopropoxide (CAS RN 546-68-9)0 %—31.12.2022
ex2905190085Titanium tetraethanolate (CAS RN 3087-36-3)0 %—31.12.2018
ex2905220010Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)0 %—31.12.2019
ex29052200203,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)0 %—31.12.2021
ex2905399510Propane-1,3-diol (CAS RN 504-63-2)0 %—31.12.2020
ex2905399520Butane-1,2-diol (CAS RN 584-03-2)0 %—31.12.2017
ex2905399520Butane-1,2-diol (CAS RN 584-03-2)0 %—31.12.2022
ex29053995302,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)0 %—31.12.2021
ex2905399540Decane-1,10-diol (CAS RN 112-47-0)0 %—31.12.2017
ex2905399540Decane-1,10-diol (CAS RN 112-47-0)0 %—31.12.2022
ex29053995502-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)0 %—31.12.2018
ex2905490010Ethylidynetrimethanol (CAS RN 77-85-0)0 %—31.12.2020
ex29055998202,2,2-Trifluoroethanol (CAS RN 75-89-8)0 %—31.12.2019
ex2906190010Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)0 %—31.12.2018
ex29061900204,4'-Isopropylidenedicyclohexanol (CAS RN 80-04-6)0 %—31.12.2018
ex29061900504-tert-Butylcyclohexanol (CAS RN 98-52-2)0 %—31.12.2019
ex29062900201-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)0 %—31.12.2018
ex29062900302-Phenylethanol (CAS RN 60-12-8)0 %—31.12.2017
ex29062900302-Phenylethanol (CAS RN 60-12-8)0 %—31.12.2022
ex29062900402-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)0 %—31.12.2020
ex2907120020Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more0 %—31.12.2019
ex2907120030p-Cresol (CAS RN 106-44-5)0 %—31.12.2019
ex29071590102-Naphthol (CAS RN 135-19-3)0 %—31.12.2021
ex29071910102,6-Xylenol (CAS RN 576-26-1)0 %—31.12.2019
ex2907199020Biphenyl-4-ol (CAS RN 92-69-3)0 %—31.12.2018
ex2907210010Resorcinol (CAS RN 108-46-3)0 %—31.12.2018
ex29072900156,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9)0 %—31.12.2018
ex29072900204,4'-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)0 %—31.12.2018
ex29072900254-Hydroxybenzyl alcohol (CAS RN 623-05-2)0 %—31.12.2019
ex29072900304,4',4'-Ethylidynetriphenol (CAS RN 27955-94-8)0 %—31.12.2018
ex29072900452-Methylhydroquinone (CAS RN 95-71-6)0 %—31.12.2021
ex29072900506,6',6'-Tricyclohexyl-4,4',4'-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)0 %—31.12.2018
ex2907290055Biphenyl-2,2'-diol (CAS RN 1806-29-7)0 %—31.12.2017
ex29072900652,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)0 %—31.12.2019
ex29072900702,2',2’,6,6',6'-Hexa-tert-butyl-α,α’,α’-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)0 %—31.12.2018
ex2907290085Phloroglucinol whether or not hydrated0 %—31.12.2018
ex2908190010Pentafluorophenol (CAS RN 771-61-9)0 %—31.12.2018
ex29081900204,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)0 %—31.12.2018
ex29081900304-Chlorophenol (CAS RN 106-48-9)0 %—31.12.2019
ex29081900403,4,5-Trifluorophenol (CAS RN 99627-05-1)0 %—31.12.2020
ex29081900504-Fluorophenol (CAS RN 371-41-5)0 %—31.12.2020
ex29089900304-Nitrophenol (CAS RN 100-02-7)0 %—31.12.2018
ex29089900404,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)0 %—31.12.2017
ex29089900404,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)0 %—31.12.2018
ex2909199020Bis(2-chloroethyl) ether (CAS RN 111-44-4)0 %—31.12.2018
ex2909199030Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more0 %—31.12.2018
ex29091990503-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)0 %—31.12.2021
ex29091990601-Methoxyheptafluoropropane (CAS RN 375-03-1)0 %—31.12.2018
ex29092000108-Methoxycedrane (CAS RN 19870-74-7)0 %—31.12.2021
ex2909303810Bis(pentabromophenyl) ether (CAS RN 1163-19-5)0 %—31.12.2018
ex29093038201,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)0 %—31.12.2021
ex29093038301,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)0 %—31.12.2020
ex29093090102-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)0 %—31.12.2019
ex2909309015{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)0 %—31.12.2021
ex29093090201,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)0 %—31.12.2019
ex29093090251,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane0 %—31.12.2021
ex29093090303,4,5-Trimethoxytoluene (CAS RN 6443-69-2)0 %—31.12.2020
ex29093090401-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)0 %—31.12.2020
ex29093090501-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)0 %—31.12.2020
ex29093090601-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)0 %—31.12.2020
ex2909309070O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)0 %—31.12.2021
ex2909309080Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more0 %—31.12.2021
ex29094980101-Propoxypropan-2-ol (CAS RN 1569-01-3)0 %—31.12.2020
ex29095000104-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)0 %—31.12.2018
ex2909500020Ubiquinol (CAS RN 992-78-9)0 %—31.12.2020
ex2909600010Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)0 %—31.12.2018
ex29096000201,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)0 %—31.12.2017
ex29096000303,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons0 %—31.12.2019
ex29096000401,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)0 %—31.12.2017
ex29109000151,2-Epoxycyclohexane (CAS RN 286-20-4)0 %—31.12.2018
ex29109000202-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)0 %—31.12.2018
ex29109000302,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)0 %—31.12.2018
ex29109000502,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)0 %—31.12.2020
ex2910900080Allyl glycidyl ether (CAS RN 106-92-3)0 %—31.12.2021
ex2911000010Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2)0 %—31.12.2020
ex2912190010Undecanal (CAS RN 112-44-7)0 %—31.12.2021
ex29122900152,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)0 %—31.12.2021
ex2912290025Mixture of isomers consisting of:85 (± 10) % by weight of 4-isobutyl-2-methylbenzaldehyde (CAS RN 73206-60-7)15 (± 10) % by weight of 2-isobutyl-4-methyllbenzaldehyde (CAS RN 68102-28-3)0 %—31.12.2021
ex2912290035Cinnamaldehyde (CAS RN 104-55-2)0 %kg31.12.2022
ex29122900504-Isobutylbenzaldehyde (CAS RN 40150-98-9)0 %—31.12.2017
ex29122900504-Isobutylbenzaldehyde (CAS RN 40150-98-9)0 %—31.12.2018
ex29122900603,4-Dimethylbenzaldehyde (CAS RN 5973-71-7)0 %—31.12.2018
ex29122900704-tert-Butylbenzaldehyde (CAS RN 939-97-9)0 %—31.12.2018
ex29122900804-Isopropylbenzaldehyde (CAS RN 122-03-2)0 %—31.12.2018
ex29124900103-Phenoxybenzaldehyde (CAS RN 39515-51-0)0 %—31.12.2018
ex29124900204-Hydroxybenzaldehyde (CAS RN 123-08-0)0 %—31.12.2017
ex29124900204-Hydroxybenzaldehyde (CAS RN 123-08-0)0 %—31.12.2022
ex2912490030Salicylaldehyde (CAS RN 90-02-8)0 %—31.12.2020
ex29124900403-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)0 %—31.12.2020
ex2914199020Heptan-2-one (CAS RN 110-43-0)0 %—31.12.2017
ex29141990303-Methylbutanone (CAS RN 563-80-4)0 %—31.12.2017
ex2914199040Pentan-2-one (CAS RN 107-87-9)0 %—31.12.2017
ex2914199020Heptan-2-one (CAS RN 110-43-0)0 %—31.12.2022
ex29141990303-Methylbutanone (CAS RN 563-80-4)0 %—31.12.2022
ex2914199040Pentan-2-one (CAS RN 107-87-9)0 %—31.12.2022
ex2914290020Cyclohexadec-8-enone (CAS RN 3100-36–5)0 %—31.12.2018
ex2914290030(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)0 %—31.12.2020
ex2914290040Camphor0 %—31.12.2018
ex2914290050trans-β-Damascone (CAS RN 23726-91-2)0 %—31.12.2021
ex29143900152,6-Dimethyl-1-indanone (CAS RN 66309-83-9)0 %—31.12.2019
ex29143900251,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)0 %—31.12.2019
ex2914390030Benzophenone (CAS RN 119-61-9)0 %—31.12.2017
ex2914390030Benzophenone (CAS RN 119-61-9)0 %—31.12.2022
ex29143900504-Phenylbenzophenone (CAS RN 2128-93-0)0 %—31.12.2018
ex29143900604-Methylbenzophenone (CAS RN 134-84-9)0 %—31.12.2018
ex2914390070Benzil (CAS RN 134-81-6)0 %—31.12.2017
ex29143900804'-Methylacetophenone (CAS RN 122-00-9)0 %—31.12.2017
ex2914390070Benzil (CAS RN 134-81-6)0 %—31.12.2022
ex29143900804′-Methylacetophenone (CAS RN 122-00-9)0 %—31.12.2022
ex29145000203'-Hydroxyacetophenone (CAS RN 121-71-1)0 %—31.12.2020
ex29145000254'-Methoxyacetophenone (CAS RN 100-06-1)0 %—31.12.2018
ex29145000302'-Hydroxyacetophenone (CAS RN 118-93-4)0 %—31.12.2018
ex29145000362,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)0 %—31.12.2018
ex29145000404-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)0 %—31.12.2021
ex29145000453,4-Dihydroxybenzophenone (CAS RN 10425-11-3)0 %—31.12.2017
ex29145000453,4-Dihydroxybenzophenone (CAS RN 10425-11-3)0 %—31.12.2022
ex29145000552,2',4,4'-Tetrahydroxybenzophenone (CAS RN 131-55-5)0 %—31.12.2018
ex29145000602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %—31.12.2017
ex29145000602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %—31.12.2022
ex29145000653-Methoxyacetophenone (CAS RN 586-37-8)0 %—31.12.2020
ex291450007016α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2)0 %—31.12.2017
ex29145000757-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)0 %—31.12.2020
ex29145000802',6'-Dihydroxyacetophenone (CAS RN 699-83-2)0 %—31.12.2018
ex29145000854,4'- Dihydroxybenzophenone (CAS RN 611-99-4)0 %—31.12.2021
ex29146980102-Ethylanthraquinone (CAS RN 84-51-5)0 %—31.12.2018
ex29146980202-Pentylanthraquinone (CAS RN 13936-21-5)0 %—31.12.2019
ex29146980301,4-Dihydroxyanthraquinone (CAS RN 81-64-1)0 %—31.12.2018
ex2914698040p-Benzoquinone (CAS RN 106-51-4)0 %—31.12.2021
ex2914698050Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)0 %—31.12.2019
ex29147900151-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5)0 %—31.12.2020
ex29147900202,4'-Difluorobenzophenone (CAS RN 342-25-6)0 %—31.12.2017
ex29147900202,4′-Difluorobenzophenone (CAS RN 342-25-6)0 %—31.12.2022
ex29147900251-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5)0 %—31.12.2020
ex2914790040Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)0 %—31.12.2018
ex29147900503'-Chloropropiophenone (CAS RN 34841-35-5)0 %—31.12.2018
ex29147900604'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)0 %—31.12.2020
ex29147900651,4-bis(4-Fluorobenzoyl) Benzene (CAS RN 68418-51-9)0 %—31.12.2021
ex29147900704-Chloro-4'-hydroxybenzophenone (CAS RN 42019-78-3)0 %—31.12.2021
ex29147900754,4'-Difluorobenzophenone (CAS RN 345-92-6)0 %—31.12.2021
ex2914790080Tetrachloro-p-benzoquinone (CAS RN 118-75-2)0 %—31.12.2018
ex2915120010Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)0 %—31.12.2021
ex2915290010Antimony triacetate (CAS RN 6923-52-0)0 %—31.12.2018
ex29153900252-Methylcyclohexyl acetate (CAS RN 5726-19-2)0 %—31.12.2018
ex2915390040tert-Butyl acetate (CAS RN 540-88-5)0 %—31.12.2018
ex29153900503-Acetylphenyl acetate (CAS RN 2454-35-5)0 %—31.12.2019
ex2915390060Dodec-8-enyl acetate (CAS RN 28079-04-1)0 %—31.12.2020
ex2915390065Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)0 %—31.12.2020
ex2915390070Dodec-9-enyl acetate (CAS RN 16974-11-1)0 %—31.12.2020
ex2915390075Isobornyl acetate (CAS RN 125-12-2)0 %—31.12.2021
ex29153900801-Phenylethyl acetate (CAS RN 93-92-5)0 %—31.12.2021
ex29153900852-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)0 %—31.12.2018
ex2915601910Ethyl butyrate (CAS RN 105-54-4)0 %—31.12.2017
ex29159070303,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)0 %—31.12.2017
ex2915601910Ethyl butyrate (CAS RN 105-54-4)0 %—31.12.2022
ex29159070303,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)0 %—31.12.2022
ex2915907045Trimethyl orthoformate (CAS RN 149-73-5)0 %—31.12.2019
ex2915907050Allyl heptanoate (CAS RN 142-19-8)0 %—31.12.2019
ex2915907055Triethyl orthoformate (CAS RN 122-51-0)0 %—31.12.2018
ex2915907060Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)0 %—31.12.2020
ex29159070652-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3)0 %—31.12.2020
ex29159070752,2-Dimethylbutyryl chloride (CAS RN 5856-77-9)0 %—31.12.2017
ex2915907080Ethyl difluoroacetate (CAS RN 454-31-9)0 %—31.12.2021
ex29161200102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)0 %—31.12.2018
ex29161200402,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)0 %—31.12.2018
ex29161200702-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)0 %—31.12.2017
ex2916130010Hydroxyzinc methacrylate powder (CAS RN 63451-47-8)0 %—31.12.2020
ex29161200702-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)0 %—31.12.2022
ex2916130020Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9)0 %—31.12.2018
ex2916130030Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities0 %—31.12.2020
ex29161400102,3-Epoxypropyl methacrylate (CAS RN 106-91-2)0 %—31.12.2018
ex2916140020Ethyl methacrylate (CAS RN 97-63-2)0 %—31.12.2018
ex2916140030Allyl methacrylate (CAS RN 96-05-9) and its’ isomers with a purity by weight of 98 % or more and containing at least:0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)0 %—31.12.2020
ex2916140030Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)0 %—31.12.2020
ex2916199520Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)0 %—31.12.2018
ex2916199540Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds0 %—31.12.2018
ex2916199550Methyl 2-fluoroacrylate (CAS RN 2343-89-7)0 %—31.12.2019
ex2916200015Transfluthrin (ISO) (CAS RN 118712-89-3)0 %—31.12.2021
ex2916200050Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)0 %—31.12.2018
ex29162000603-Cyclohexylpropionic acid (CAS RN 701-97-3)0 %—31.12.2020
ex2916310010Benzyl benzoate (CAS RN 120-51-4)0 %—31.12.2021
ex29163990133,5-Dinitrobenzoic acid (CAS RN 99-34-3)0 %—31.12.2019
ex29163990152-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)0 %—31.12.2021
ex29163990182,4-Dichlorophenylacetic acid (CAS RN 19719-28-9)0 %—31.12.2019
ex29163990203,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)0 %—31.12.2018
ex2916399023(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)0 %—31.12.2019
ex29163990252-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)0 %—31.12.2021
ex29163990302,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)0 %—31.12.2020
ex2916399033Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)0 %—31.12.2021
ex2916399035Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)0 %—31.12.2018
ex29163990386-Bromonaphthalene-2-carboxylic acid (CAS RN 5773-80-8)0 %—31.12.2018
ex29163990414-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)0 %—31.12.2020
ex29163990483-Fluorobenzoyl chloride (CAS RN 1711-07-5)0 %—31.12.2018
ex29163990503,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)0 %—31.12.2018
ex29163990513-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7)0 %—31.12.2020
ex29163990535-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)0 %—31.12.2020
ex29163990554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %—31.12.2017
ex29163990554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %—31.12.2022
ex29163990604-Ethylbenzoyl chloride (CAS RN 16331-45-6)0 %—31.12.2018
ex29163990612-Phenylbutyric Acid (CAS RN 90-27-7)0 %—31.12.2020
ex2916399070Ibuprofen (INN) (CAS RN 15687-27-1)0 %—31.12.2018
ex2916399073(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)0 %—31.12.2021
ex2916399075m-Toluic acid (CAS RN 99-04-7)0 %—31.12.2017
ex2916399085(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)0 %—31.12.2017
ex2916399075m-Toluic acid (CAS RN 99-04-7)0 %—31.12.2022
ex2916399085(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)0 %—31.12.2022
ex2917110020Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)0 %—31.12.2018
ex2917110030Cobalt oxalate (CAS RN 814-89-1)0 %—31.12.2019
ex2917191010Dimethyl malonate (CAS RN 108-59-8)0 %—31.12.2019
ex2917191020Diethyl malonate (CAS RN 105-53-3)0 %—31.12.2017
ex2917191020Diethyl malonate (CAS RN 105-53-3)0 %—31.12.2022
ex2917198015Dimethyl but-2-ynedioate (CAS RN 762-42-5)0 %—31.12.2018
ex2917198020Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate (CAS RN 23386-52-9)0 %—31.12.2018
ex2917198030Ethylene brassylate (CAS RN 105-95-3)0 %—31.12.2019
ex2917198050Tetradecanedioic acid (CAS RN 821-38-5)0 %—31.12.2020
ex2917198070Itaconic acid (CAS RN 97-65-4)0 %—31.12.2018
ex29172000301,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)0 %—31.12.2018
ex29172000403-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)0 %—31.12.2018
ex2917340010Diallyl phthalate (CAS RN 131-17-9)0 %—31.12.2018
ex2917399520Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)0 %—31.12.2020
ex2917399525Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)0 %—31.12.2020
ex2917399530Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)0 %—31.12.2020
ex29173995351-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)0 %—31.12.2020
ex2917399540Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)0 %—31.12.2018
ex29173995501,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)0 %—31.12.2019
ex2917399560Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8)0 %—31.12.2019
ex29173995701,2,4-Benzenetricarboxylic acid, 1,2,4-trioctyl ester (CAS RN 89-04-3) with a purity by weight of more than 96 %0 %—31.12.2020
ex2918160020Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5)0 %—31.12.2018
ex2918193010Cholic acid (CAS RN 81-25-4)0 %—31.12.2019
ex29181930203-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)0 %—31.12.2019
ex2918199820L-Malic acid (CAS RN 97-67-6)0 %—31.12.2018
ex2918290010Monohydroxynaphthoic acids0 %—31.12.2018
ex2918290035Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)0 %—31.12.2017
ex2918290035Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)0 %—31.12.2022
ex2918290050Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)0 %—31.12.2018
ex2918290060Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)0 %—31.12.2021
ex29182900703,5-Diiodosalicylic acid (CAS RN 133-91-5)0 %—31.12.2019
ex2918300030Methyl-2-benzoylbenzoate (CAS RN 606-28-0)0 %—31.12.2018
ex2918300050Ethyl acetoacetate (CAS RN 141-97-9)0 %—31.12.2017
ex2918300050Ethyl acetoacetate (CAS RN 141-97-9)0 %—31.12.2022
ex29183000604-Oxovaleric acid (CAS RN 123-76-2)0 %—31.12.2019
ex29183000702-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)0 %—31.12.2019
ex2918300080Methyl benzoylformate (CAS RN 15206-55-0)0 %—31.12.2021
ex29189990103,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)0 %—31.12.2018
ex29189990133-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)0 %—31.12.2020
ex2918999015Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)0 %—31.12.2017
ex2918999015Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)0 %—31.12.2022
ex2918999018Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)0 %—31.12.2020
ex2918999020Methyl 3-methoxyacrylate (CAS RN 5788-17-0)0 %—31.12.2019
ex29189990231,8-Dihydroxyanthraquinone-3-carboxylic acid (CAS RN 478-43-3)0 %—31.12.2021
ex2918999025Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)0 %—31.12.2018
ex2918999027Ethyl 3-ethoxypropionate (CAS RN 763-69-9)0 %—31.12.2022
ex2918999030Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)0 %—31.12.2018
ex2918999035p-Anisic acid (CAS RN 100-09-4)0 %—31.12.2019
ex2918999040trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)0 %—31.12.2018
ex29189990454-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)0 %—31.12.2019
ex2918999050Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)0 %—31.12.2018
ex2918999055Stearyl glycyrrhetinate(CAS RN 13832-70-7)0 %—31.12.2019
ex29189990603,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)0 %—31.12.2018
ex2918999065Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)0 %—31.12.2019
ex2918999070Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)0 %—31.12.2019
ex29189990753,4-Dimethoxybenzoic acid (CAS RN 93-07-2)0 %—31.12.2019
ex2918999080Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9)0 %—31.12.2021
ex2918999085Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more0 %—31.12.2020
ex29199000102,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2)0 %—31.12.2018
ex2919900030Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)0 %—31.12.2018
ex2919900040Tri-n-hexylphosphate (CAS RN 2528-39-4)0 %—31.12.2018
ex2919900050Triethyl phosphate (CAS RN 78-40-0)0 %—31.12.2021
ex2919900060Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)0 %—31.12.2018
ex2919900070Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)0 %—31.12.2019
ex2920190010Fenitrothion (ISO) (CAS RN 122-14-5)0 %—31.12.2018
ex2920190020Tolclofos-methyl (ISO) (CAS RN 57018-04-9)0 %—31.12.2018
ex29201900302,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide (CAS RN 4090-51-1)0 %—31.12.2019
29202300Trimethyl phosphite (CAS RN 121-45-9)0 %—31.12.2018
29202400Triethyl phosphite (CAS RN 122-52-1)0 %—31.12.2021
ex2920290010O,O’-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)0 %—31.12.2018
ex2920290015Phosphorous acid 3,3′,5,5′-tetrakis(1,1-dimethylethyl)-6,6′-dimethyl[1,1′-biphenyl]-2,2′-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5)0 %—31.12.2022
ex2920290020Tris(methylphenyl)phosphite (CAS RN 25586-42-9)0 %—31.12.2020
ex29202900302,2'-[[3,3',5,5'-Tetrakis(1,1-dimethylethyl)[1,1'-biphenyl]-2,2'-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2)0 %—31.12.2020
ex2920290040Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)0 %—31.12.2020
ex29202900ex292090705050Fosetyl-aluminium (CAS RN 39148-24-8)0 %—31.12.2018
ex29202900ex292090706040Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides0 %—31.12.2021
ex2920290050Fosetyl-aluminium (CAS RN 39148-24-8)0 %—31.12.2018
ex2920290060Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides0 %—31.12.2021
ex2920901010Diethyl sulphate (CAS RN 64-67-5)0 %—31.12.2018
ex2920901020Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3)0 %—31.12.2018
ex2920901040Dimethyl carbonate (CAS RN 616-38-6)0 %—31.12.2018
ex2920901050Di-tert-butyl dicarbonate (CAS RN 24424-99-5)0 %—31.12.2018
ex29209010602,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)0 %—31.12.2017
ex29209010602,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)0 %—31.12.2022
ex2920901080Sodium 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl sulphate (CAS RN 25446-78-0) in the form of a liquid paste with a content by weight in water of 62 % or more but not more than 65 %0 %—31.12.2021
ex2920907040Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides0 %—31.12.2021
ex2920907050Fosetyl-aluminium (CAS RN 39148-24-8)0 %—31.12.2018
ex2920907060Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)0 %—31.12.2018
ex2920907080Bis(pinacolato)diboron (CAS RN 73183-34-3)0 %—31.12.2020
292113002-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)0 %—31.12.2017
292113002-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)0 %—31.12.2022
ex29211950ex292990001020Diethylamino-triethoxysilane (CAS RN 35077-00-0)0 %—31.12.2019
ex2921199920Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)0 %—31.12.2018
ex2921199930Allylamine (CAS RN 107-11-9)0 %—31.12.2018
ex29211999452-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)0 %—31.12.2021
ex2921199960Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3)0 %—31.12.2018
ex2921199970N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)0 %—31.12.2017
ex2921199970N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)0 %—31.12.2022
ex2921199980Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %—31.12.2019
ex2921290020Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)0 %—31.12.2018
ex2921290030Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)0 %—31.12.2018
ex2921290040Decamethylenediamine (CAS RN 646-25-3)0 %—31.12.2020
ex2921290050N’-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4)0 %—31.12.2021
ex29213099301,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)0 %—31.12.2020
ex2921309940Cyclopropylamin (CAS RN 765-30-0)0 %—31.12.2017
ex2921309940Cyclopropylamine (CAS RN 765-30-0)0 %—31.12.2022
ex29214200154-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2)0 %—31.12.2018
ex29214200203-Chloroaniline (CAS RN 108-42-9)0 %—31.12.2018
ex2921420025Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)0 %—31.12.2018
ex29214200304-Nitroaniline (CAS RN 100-01-6)0 %—31.12.2018
ex29214200332-Fluoroaniline (CAS RN 348-54-9)0 %—31.12.2020
ex29214200352-Nitroaniline (CAS RN 88-74-4)0 %—31.12.2018
ex2921420040Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)0 %—31.12.2019
ex29214200452,4,5-Trichloroaniline (CAS RN 636-30-6)0 %—31.12.2018
ex29214200503-Aminobenzenesulfonic acid (CAS RN 121-47-1)0 %—31.12.2018
ex29214200702-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)0 %—31.12.2019
ex29214200804-Chloro-2-nitroaniline (CAS RN 89-63-4)0 %—31.12.2018
ex29214200853,5-Dichloroaniline (CAS RN 626-43-7)0 %—31.12.2018
ex29214200862,5-Dichloroaniline (CAS RN 95-82-9)0 %—31.12.2017
ex2921420087N-Methylaniline (CAS RN 100-61-8)0 %—31.12.2017
ex29214200883,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)0 %—31.12.2017
ex29214200862,5-Dichloroaniline (CAS RN 95-82-9)0 %—31.12.2022
ex2921420087N-Methylaniline (CAS RN 100-61-8)0 %—31.12.2022
ex29214200883,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)0 %—31.12.2022
ex29214300204-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)0 %—31.12.2018
ex29214300303-Nitro-p-toluidine (CAS RN 119-32-4)0 %—31.12.2018
ex29214300404-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)0 %—31.12.2018
ex29214300504-Aminobenzotrifluoride (CAS RN 455-14-1)0 %—31.12.2020
ex29214300603-Aminobenzotrifluoride (CAS RN 98-16-8)0 %—31.12.2020
ex29214300806-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)0 %—31.12.2017
ex29214300806-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)0 %—31.12.2018
ex2921440020Diphenylamine (CAS RN 122-39-4)0 %—31.12.2018
ex29214500202-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)0 %—31.12.2018
ex29214500507-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)0 %—31.12.2018
ex29214500601-Naphthylamine (CAS RN 134-32-7)0 %—31.12.2022
ex29214500708-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8)0 %—31.12.2022
ex2921490020Pendimethalin (ISO) (CAS RN 40487-42-1)3,5 %—31.12.2018
ex2921490040N-1-Naphthylaniline (CAS RN 90-30-2)0 %—31.12.2018
ex29214900503,4-Xylidine (CAS RN 95-64-7)0 %—31.12.2018
ex29214900602,6-Diisopropylaniline (CAS RN 24544-04-5)0 %—31.12.2020
ex29214900804-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)0 %—31.12.2020
ex29214900854-Isopropylaniline (CAS RN 99-88-7)0 %—31.12.2017
ex2921511920Toluene diamine (TDA), containing by weight:72 % or more but not more than 82 % of 4-methyl-m-phenylenediamine, and17 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, andnot more than 0,23 % of residual tarwhether or not containing 7 % or less of water0 %—31.12.2018
ex29215119302-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)0 %—31.12.2018
ex2921511940p-Phenylenediamine (CAS RN 106-50-3)0 %—31.12.2021
ex2921511950Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene0 %—31.12.2019
ex29215119602,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)0 %—31.12.2018
ex29215119704-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7)0 %—31.12.2020
ex2921599010Mixture of isomers of 3,5-diethyltoluenediamine0 %—31.12.2018
ex29215990303,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %—31.12.2017
ex29215990303,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %—31.12.2022
ex29215990404,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8)0 %—31.12.2018
ex2921599060(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)0 %—31.12.2017
ex2921599060(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)0 %—31.12.2022
ex2921599070Tris(4-aminophenyl)methane (CAS RN 548-61-8)0 %—31.12.2020
ex29221900202-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)0 %—31.12.2017
ex2922190025Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2)0 %—31.12.2017
ex29221900202-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)0 %—31.12.2022
ex2922190030N,N,N’,N’-Tetramethyl-2,2'-oxybis(ethylamine) (CAS RN 3033-62-3)0 %—31.12.2018
ex29221900352-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)0 %—31.12.2020
ex2922190040(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)0 %—31.12.2021
ex29221900502-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)0 %—31.12.2018
ex2922190060N,N,N’-trimethyl-N’-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine), (CAS RN 83016-70-0)0 %—31.12.2018
ex2922190065trans-4-Aminocyclohexanol (CAS RN 27489-62-9)0 %—31.12.2018
ex29221900752-Ethoxyethylamine (CAS RN 110-76-9)0 %—31.12.2018
ex2922190080N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)0 %—31.12.2019
ex2922190085(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)0 %—31.12.2018
ex29222100102-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)0 %—31.12.2018
ex29222100306-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)0 %—31.12.2019
ex29222100407-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)0 %—31.12.2018
ex2922210050Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)0 %—31.12.2019
ex29222100604-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)0 %—31.12.2018
ex29222900203-Aminophenol (CAS RN 591-27-5)0 %—31.12.2018
ex29222900255-Amino-o-cresol (CAS RN 2835-95-2)0 %—31.12.2018
ex29222900301,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)0 %—31.12.2020
ex29222900404-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7)0 %—31.12.2020
ex2922290045Anisidines0 %—31.12.2018
ex2922290063Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more0 %—31.12.2020
ex29222900654-Trifluoromethoxyaniline (CAS RN 461-82-5)0 %—31.12.2019
ex29222900704-Nitro-o-anisidine (CAS RN 97-52-9)0 %—31.12.2018
ex2922290073Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)0 %—31.12.2021
ex29222900754-(2-Aminoethyl)phenol (CAS RN 51-67-2)0 %—31.12.2020
ex29222900803-Diethylaminophenol (CAS RN 91-68-9)0 %—31.12.2018
ex29222900854-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)0 %—31.12.2018
ex29223900101-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts0 %—31.12.2018
ex29223900202-Amino-5-chlorobenzophenone (CAS RN 719-59-5)0 %—31.12.2020
ex29223900253-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5)0 %—31.12.2020
ex29223900355-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)0 %—31.12.2020
ex2922430010Anthranilic acid (CAS RN 118-92-3)0 %—31.12.2018
ex2922498510Ornithine aspartate (INNM) (CAS RN 3230-94-2)0 %—31.12.2018
ex29224985203-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)0 %—31.12.2017
ex29224985203-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)0 %—31.12.2022
ex2922498525Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)0 %—31.12.2019
ex2922498530Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)0 %—31.12.2020
ex29224985352- (3-Amino-4-chloro-benzoyl) benzoic acid (CAS RN 118-04-7)0 %—31.12.2021
ex2922498540Norvaline0 %—31.12.2018
ex2922498545Glycine (CAS RN 56-40-6)0 %—31.12.2020
ex2922498550D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)0 %—31.12.2019
ex2922498555(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7)0 %—31.12.2019
ex2922498560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %—31.12.2017
ex2922498560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %—31.12.2022
ex2922498565Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)0 %—31.12.2020
ex29224985702-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)0 %—31.12.2018
ex2922498575L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)0 %—31.12.2022
ex292249858012-Aminododecanoic acid (CAS RN 693-57-2)0 %—31.12.2018
ex29225000102-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)0 %—31.12.2021
ex29225000153,5-Diiodothyronine (CAS RN 1041-01-6)0 %—31.12.2022
ex29225000201-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)0 %—31.12.2019
ex29225000702-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate0 %—31.12.2018
ex2923100010Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)0 %—31.12.2019
ex2923900010Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide0 %—31.12.2018
ex2923900020Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7)0 %—31.12.2019
ex2923900025Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3)0 %—31.12.2018
ex2923900055Tetrabutylammonium bromide (CAS RN 1643-19-2)0 %—31.12.2021
ex2923900070Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:40 % (± 2 %) by weight of tetrapropylammonium hydroxide,0,3 % by weight or less of carbonate,0,1 % by weight or less of tripropylamine,500 mg/kg or less of bromide and25 mg/kg or less of potassium and sodium taken together0 %—31.12.2018
ex2923900075Tetraethylammonium hydroxide, in the form of an aqueous solution containing:35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,not more than 1000 mg/kg of chloride,not more than 2 mg/kg of iron andnot more than 10 mg/kg of potassium0 %—31.12.2020
ex2923900080Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride0 %—31.12.2018
ex2923900085N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)0 %—31.12.2019
ex29241900102-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)0 %—31.12.2018
ex2924190015N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)0 %—31.12.2019
ex2924190020(R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid (CAS RN 181289-33-8)0 %—31.12.2020
ex2924190025Isobutylidenediurea (CAS RN 6104-30-9)0 %—31.12.2022
ex2924190030Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)0 %—31.12.2018
ex2924190035Acetamide (CAS RN 60-35-5)0 %—31.12.2019
ex29241900453-Chloro-N-methoxy-N-methylpropanamide (CAS RN 1062512-53-1)0 %—31.12.2021
ex2924190050Acrylamide (CAS RN 79-06-1)0 %—31.12.2018
ex29241900552-Propynyl butylcarbamate (CAS RN 76114-73-3)0 %—31.12.2021
ex2924190060N,N-Dimethylacrylamide (CAS RN 2680-03-7)0 %—31.12.2021
ex2924190070Methylcarbamate (CAS RN 598-55-0)0 %—31.12.2018
ex2924190080Tetrabutylurea (CAS RN 4559-86-8)0 %—31.12.2017
ex2924190080Tetrabutylurea (CAS RN 4559-86-8)0 %—31.12.2022
ex29242100104,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts0 %—31.12.2018
ex2924210020(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)0 %—31.12.2018
29242500Alachlor (ISO), (CAS RN 15972-60-8)0 %—31.12.2018
ex29242970124-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)0 %—31.12.2018
ex2924297015Acetochlor (ISO), (CAS RN 34256-82-1)0 %—31.12.2018
ex29242970172-(Trifluoromethyl)benzamide (CAS RN 360-64-5)0 %—31.12.2019
ex29242970192-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)0 %—31.12.2019
ex29242970202-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)0 %—31.12.2019
ex2924297023Benalaxyl-M (ISO) (CAS RN 98243-83-5)0 %—31.12.2019
ex29242970272-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)0 %—31.12.2021
ex2924297030Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)0 %—31.12.2021
ex2924297033N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7)0 %—31.12.2019
ex2924297037Beflubutamid (ISO) (CAS RN 113614-08-7)0 %—31.12.2018
ex2924297040N,N’-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)0 %—31.12.2020
ex2924297043N,N’-(3,3'-Dimethylbiphenyl-4,4'-ylene)di(acetoacetamide) (CAS RN 91-96-3)0 %—31.12.2018
ex2924297045Propoxur (ISO) (CAS RN 114-26-1)0 %—31.12.2020
ex2924297050N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)0 %—31.12.2021
ex2924297051Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4)0 %—31.12.2017
ex29242970534-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)0 %—31.12.2017
ex29242970534-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)0 %—31.12.2022
ex2924297055N,N’-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)0 %—31.12.2020
ex2924297060N,N’-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1)0 %—31.12.2020
ex2924297061(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288-8)0 %—31.12.2020
ex29242970622-Chlorobenzamide (CAS RN 609-66-5)0 %—31.12.2020
ex2924297063N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)0 %—31.12.2021
ex2924297064N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)0 %—31.12.2020
ex29242970652-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0)0 %—31.12.2018
ex2924297073Napropamide (ISO) (CAS RN 15299-99-7)0 %—31.12.2019
ex29242970753-Amino-p-anisanilide (CAS RN 120-35-4)0 %—31.12.2018
ex29242970805'-Chloro-3-hydroxy-2',4'-dimethoxy-2-naphthanilide (CAS RN 92-72-8)0 %—31.12.2018
ex2924297085p-Aminobenzamide (CAS RN 2835-68-9)0 %—31.12.2018
ex2924297086Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more0 %—31.12.2017
ex2924297087Paracetamol (INN) (CAS RN 103-90-2)0 %—31.12.2018
ex2924297086Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more0 %—31.12.2022
ex29242970885'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-63-7)0 %—31.12.2018
ex2924297089Flutolanil (ISO) (CAS RN 66332-96-5)0 %—31.12.2018
ex29242970913-Hydroxy-2'-methoxy-2-naphthanilide (CAS RN 135-62-6)0 %—31.12.2018
ex29242970923-Hydroxy-2-naphthanilide (CAS RN 92-77-3)0 %—31.12.2019
ex29242970933-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5)0 %—31.12.2018
ex29242970942'-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)0 %—31.12.2018
ex29242970971,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)0 %—31.12.2018
ex2925110020Saccharin and its sodium salt0 %—31.12.2018
ex2925199510N-Phenylmaleimide (CAS RN 941-69-5)0 %—31.12.2018
ex29251995204,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)0 %—31.12.2017
ex2925199530N,N’-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)0 %—31.12.2017
ex29251995204,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)0 %—31.12.2022
ex2925199530N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)0 %—31.12.2022
ex2925290010Dicyclohexylcarbodiimide (CAS RN 538-75-0)0 %—31.12.2018
ex2925290020N-[3-(Dimethylamino)propyl]-N’-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)0 %—31.12.2018
ex2925290030Guanidine sulphamate (CAS RN 50979-18-5)0 %—31.12.2020
ex2926907012Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95 % or more0 %—31.12.2019
ex2926907013alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9)0 %—31.12.2018
ex2926907014Cyanoacetic acid (CAS RN 372-09-8)0 %—31.12.2020
ex29269070164-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)0 %—31.12.2019
ex2926907017Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more0 %—31.12.2020
ex29269070202-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)0 %—31.12.2019
ex2926907023Acrinathrin (ISO) (CAS RN 101007-06-1)0 %—31.12.2018
ex29269070252,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)0 %—31.12.2021
ex2926907027Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)0 %—31.12.2018
ex29269070304,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)0 %—31.12.2021
ex29269070354-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)0 %—31.12.2021
ex29269070402-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6)0 %—31.12.2021
ex2926907050Alkyl or alkoxyalkyl esters of cyanoacetic acid0 %—31.12.2018
ex2926907061m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)0 %—31.12.2021
ex2926907064Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers0 %—31.12.2019
ex2926907065Malononitrile (CAS RN 109-77-3)0 %—31.12.2018
ex2926907070Methacrylonitrile (CAS RN 126-98-7)0 %—31.12.2019
ex2926907074Chlorothalonil (ISO) (CAS RN 1897-45-6)0 %—31.12.2019
ex2926907075Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)0 %—31.12.2019
ex2926907080Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)0 %—31.12.2018
ex2926907086Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)0 %—31.12.2018
ex2926907089Butyronitrile (CAS RN 109-74-0)0 %—31.12.2018
ex29270000102,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride0 %—31.12.2018
ex29270000204-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2)0 %—31.12.2018
ex29270000304'-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)0 %—31.12.2018
ex2927000035C.C’-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam0 %—31.12.2019
ex29270000604,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0)0 %—31.12.2018
ex29270000804-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)0 %—31.12.2017
ex29270000804-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)0 %—31.12.2022
ex29280090103,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-bipropionamide (CAS RN 32687-78-8)0 %—31.12.2018
ex2928009013Cymoxanil (ISO) (CAS RN 57966-95-7)0 %—31.12.2019
ex2928009018Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more0 %—31.12.2019
ex2928009023Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more0 %—31.12.2020
ex2928009025Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution0 %—31.12.2020
ex2928009028Pentan-2-one oxime (CAS RN 623-40-5)0 %—31.12.2021
ex2928009030N-Isopropylhydroxylamine (CAS RN 5080-22-8)0 %—31.12.2021
ex29280090352-Chloro-N-methoxy-N-methylacetamide (CAS RN 67442-07-3)0 %—31.12.2018
ex2928009040O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2)0 %—31.12.2018
ex2928009045Tebufenozide (ISO) (CAS RN 112410-23-8)0 %—31.12.2018
ex2928009050Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %0 %—31.12.2020
ex2928009055Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)0 %—31.12.2018
ex2928009060Adipohydrazide (CAS RN 1071-93-8)0 %—31.12.2018
ex29280090652-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride0 %—31.12.2019
ex2928009070Butanone oxime (CAS RN 96-29-7)0 %—31.12.2018
ex2928009075Metaflumizone (ISO) (CAS RN 139968-49-3)0 %—31.12.2021
ex2928009080Cyflufenamid (ISO) (CAS RN 180409-60-3)0 %—31.12.2018
ex2928009085Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)0 %—31.12.2021
ex29291000153,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate (CAS RN 91-97-4)0 %—31.12.2019
ex2929100020Butyl isocyanate (CAS RN 111-36-4)0 %—31.12.2017
ex2929100020Butyl isocyanate (CAS RN 111-36-4)0 %—31.12.2022
ex2929100040m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)0 %—31.12.2018
ex2929100050m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)0 %—31.12.2018
ex29291000552,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)0 %—31.12.2017
ex29291000552,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)0 %—31.12.2022
ex2929100060Trimethylhexamethylene diisocyanate, mixed isomers0 %—31.12.2018
ex29291000801,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)0 %—31.12.2017
ex2930200010Prosulfocarb (ISO) (CAS RN 52888-80-9)0 %—31.12.2017
ex29291000801,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)0 %—31.12.2022
ex2930200010Prosulfocarb (ISO) (CAS RN 52888-80-9)0 %—31.12.2022
ex29302000202-Isopropylethylthiocarbamate (CAS RN 141-98-0)0 %—31.12.2021
ex29309098102,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)0 %—31.12.2020
ex2930909813Mercaptamine hydrochloride (CAS RN 156-57-0)0 %—31.12.2021
ex29309098144-(Methylthio)benzaldehyde (CAS RN 3446-89-7)0 %—31.12.2018
ex2930909815Ethoprophos (ISO) (CAS RN 13194-48-4)0 %—31.12.2018
ex29309098163-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)0 %—31.12.2019
ex29309098172-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)0 %—31.12.2018
ex2930909819N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N’-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2)0 %—31.12.2020
ex2930909821[2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)0 %—31.12.2021
ex2930909822Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more0 %—31.12.2020
ex2930909823Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)0 %—31.12.2018
ex2930909825Thiophanate-methyl (ISO), (CAS RN 23564-05-8)0 %—31.12.2018
ex2930909826Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more0 %—31.12.2020
ex29309098272-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)0 %—31.12.2019
ex29309098304-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)0 %—31.12.2018
ex29309098332-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)0 %—31.12.2019
ex2930909835Glutathione (CAS RN 70-18-8)0 %—31.12.2021
ex2930909837Ethanethioamide (CAS RN 62-55-5)0 %—31.12.2018
ex29309098403,3'-Thiodi(propionic acid) (CAS RN 111-17-1)0 %—31.12.2018
ex2930909843Trimethylsulfoxonium iodide (CAS RN 1774-47-6)0 %—31.12.2018
ex29309098452-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)0 %—31.12.2018
ex2930909853Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)0 %—31.12.2020
ex2930909855Thiourea (CAS RN 62-56-6)0 %—31.12.2020
ex2930909857Methyl (methylthio)acetate (CAS RN 16630-66-3)0 %—31.12.2020
ex2930909860Methyl phenyl sulphide (CAS RN 100-68-5)0 %—31.12.2018
ex29309098643-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)0 %—31.12.2019
ex2930909865Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)0 %—31.12.2017
ex2930909866Diphenyl sulphide (CAS RN 139-66-2)0 %—31.12.2017
ex2930909865Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)0 %—31.12.2022
ex29309098673-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2)0 %—31.12.2018
ex2930909868Clethodim (ISO) (CAS RN 99129-21-2)0 %—31.12.2017
ex2930909868Clethodim (ISO) (CAS RN 99129-21-2)0 %—31.12.2022
ex29309098774-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)0 %—31.12.2018
ex29309098784-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)0 %—31.12.2021
ex2930909880Captan (ISO) (CAS RN 133-06-2)0 %—31.12.2018
ex2930909881Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)3 %—31.12.2019
ex2930909883Methyl-p-tolyl sulphone (CAS RN 3185-99-7)0 %—31.12.2017
ex29309098852-Methyl-1-(methylthio)-2-propanamine (CAS RN 36567-04-1)0 %—31.12.2021
ex29309098873-Sulphinobenzoic acid (CAS RN 15451-00-0)0 %—31.12.2018
ex2930909889Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates0 %—31.12.2021
ex29309098931-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8)0 %—31.12.2021
ex2930909895N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6)0 %—31.12.2021
ex2930909897Diphenyl sulphone (CAS RN 127-63-9)0 %—31.12.2021
ex2931399008Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution0 %—31.12.2017
ex2931399008Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution0 %—31.12.2022
ex2931399013Trioctylphosphine oxide (CAS RN 78-50-2)0 %—31.12.2021
ex2931399023Di-tert-butylphosphane (CAS RN 819-19-2)0 %—31.12.2018
ex2931399025(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)0 %—31.12.2017
ex2931399025(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)0 %—31.12.2022
ex2931399028N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6)0 %—31.12.2019
ex2931399030Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)0 %—31.12.2018
ex2931399040Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)0 %—31.12.2021
ex2931399043Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane0 %—31.12.2018
ex2931399048Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)0 %—31.12.2019
ex29313990553-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)0 %—31.12.2018
ex2931399057Trimethyl phosphonoacetate (CAS RN 5927-18-4)0 %—31.12.2020
ex2931900003Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane0 %—31.12.2018
ex2931900005Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN0 %—31.12.2020
ex2931900005Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN0 %—31.12.2020
ex2931900015Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl0 %—31.12.2019
ex2931900018Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5)0 %—31.12.2019
ex2931900020Ferrocene (CAS RN 102-54-5)0 %—31.12.2022
ex2931900033Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7)0 %—31.12.2019
ex2931900035N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)0 %—31.12.2019
ex2931900045Tris(4-methylpentan-2-oximino)methylsilane (CAS RN 37859-57-7)0 %—31.12.2018
ex2931900050Trimethylsilane (CAS RN 993-07-7)0 %—31.12.2021
ex2931900053Trimethylborane (CAS RN 593-90-8)0 %—31.12.2019
ex29319000604-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1)0 %—31.12.2020
ex2931900063Chloroethenyldimethylsilane (CAS RN 1719-58-0)0 %—31.12.2020
ex2931900065Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)0 %—31.12.2020
ex2931900067Dimethyltin dioleate (CAS RN 3865-34-7)0 %—31.12.2020
ex2931900070(4-Propylphenyl)boronic acid (CAS RN 134150-01-9)0 %—31.12.2020
ex2932130010Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)0 %—31.12.2018
ex29321400ex2940000010401,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)0 %—31.12.2019
ex29321400101,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)0 %—31.12.2019
ex2932190020Tetrahydrofuran-borane (CAS RN 14044-65-6)0 %—31.12.2020
ex2932190040Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more0 %—31.12.2019
ex29321900412,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)0 %—31.12.2019
ex2932190070Furfurylamine (CAS RN 617-89-0)0 %—31.12.2019
ex2932190075Tetrahydro-2-methylfuran (CAS RN 96-47-9)0 %—31.12.2018
ex29321900805-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)0 %—31.12.2021
ex29322090102'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 70516-41-5)0 %—31.12.2018
ex2932209015Coumarin (CAS RN 91-64-5)0 %—31.12.2021
ex2932209020Ethyl 6'-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9'-xanthene]-2'-carboxylate (CAS RN 154306-60-2)0 %—31.12.2017
ex29322090356'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 36431-22-8)0 %—31.12.2018
ex2932209040(S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9)0 %—31.12.2017
ex2932209040(S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)0 %—31.12.2022
ex29322090452,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)0 %—31.12.2018
ex2932209050L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5)0 %t31.12.2022
ex29322090556-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)0 %—31.12.2018
ex29322090606'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 29512-49-0)0 %—31.12.2021
ex2932209065Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)0 %—31.12.2020
ex29322090703',6'-Bis(ethylamino)-2',7'-dimethylspiro[isobenzofuran-1(3H),9'-[9H]-xanthen]-3-one, (CAS RN 41382-37-0)0 %—31.12.2018
ex29322090716'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 89331-94-2)0 %—31.12.2021
ex2932209080Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)0 %—31.12.2018
ex2932209084Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)0 %—31.12.2018
ex2932990010Bendiocarb (ISO) (CAS RN 22781-23-3)0 %—31.12.2018
ex2932990013(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)0 %—31.12.2021
ex29329900151,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)0 %—31.12.2021
ex29329900184-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)0 %—31.12.2021
ex2932990020Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)0 %—31.12.2021
ex29329900251-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)0 %—31.12.2017
ex29329900251-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)0 %—31.12.2022
ex2932990043Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more0 %—31.12.2019
ex29329900452-Butylbenzofuran (CAS RN 4265-27-4)0 %—31.12.2018
ex29329900507-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)0 %—31.12.2020
ex29329900531,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)0 %—31.12.2018
ex29329900556-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7)0 %—31.12.2018
ex29329900654,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)0 %—31.12.2020
ex29329900701,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)0 %—31.12.2021
ex29329900753-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)0 %—31.12.2021
ex29329900801,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)0 %—31.12.2017
ex29329900801,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)0 %—31.12.2018
ex29329900851,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)0 %—31.12.2018
ex2933199015Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more0 %—31.12.2019
ex29331990253-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)0 %—31.12.2019
ex29331990303-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)0 %—31.12.2018
ex29331990351,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS RN 191614-02-5)0 %—31.12.2020
ex2933199040Edaravone (INN) (CAS RN 89-25-8)0 %—31.12.2018
ex29331990455-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)0 %—31.12.2021
ex2933199050Fenpyroximate (ISO) (CAS RN 134098-61-6)0 %—31.12.2019
ex29331990555-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)0 %—31.12.2021
ex2933199060Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)0 %—31.12.2019
ex29331990704,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)0 %—31.12.2018
ex29331990803-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)0 %—31.12.2017
ex2933199085Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioate (CAS RN 473799-16-5)0 %—31.12.2017
ex29331990803-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)0 %—31.12.2022
ex2933210035Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97 % or more0 %—31.12.2020
ex29332100501-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)/(CAS RN 32718-18-6)0 %—31.12.2021
ex29332100551-Aminohydantoin hydrochloride (CAS RN 2827-56-7)0 %—31.12.2020
ex2933210060DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)0 %—31.12.2021
ex29332100805,5-Dimethylhydantoin (CAS RN 77-71-4)0 %—31.12.2020
ex2933299015Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)0 %—31.12.2018
ex2933299025Prochloraz (ISO) (CAS RN 67747-09-5)0 %—31.12.2018
ex29332990351-Trityl-4-formylimidazole (CAS RN 33016-47-6)0 %—31.12.2018
ex2933299040Triflumizole (ISO) (CAS RN 68694-11-1)0 %—31.12.2019
ex2933299045Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)0 %—31.12.2018
ex29332990501,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)0 %—31.12.2018
ex2933299055Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more0 %—31.12.2019
ex29332990601-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)0 %—31.12.2021
ex2933299065(S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8)0 %—31.12.2020
ex2933299070Cyazofamid (ISO) (CAS RN 120116-88-3)0 %—31.12.2021
ex29332990752,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)0 %—31.12.2021
ex2933299080Imazalil (ISO) (CAS RN 35554-44-0)0 %—31.12.2017
ex2933299080Imazalil (ISO) (CAS RN 35554-44-0)0 %—31.12.2022
29333950Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)0 %—31.12.2019
ex29333999102-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)0 %—31.12.2021
ex29333999112-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)0 %—31.12.2019
ex29333999122,3-Dichloropyridine (CAS RN 2402-77-9)0 %—31.12.2017
ex29333999122,3-Dichloropyridine (CAS RN 2402-77-9)0 %—31.12.2022
ex2933399913Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194-96-6)0 %—31.12.2020
ex2933399914N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)0 %—31.12.2020
ex2933399915Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9)0 %—31.12.2018
ex2933399916Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6)0 %—31.12.2020
ex29333999173,5-Dimethylpyridine (CAS RN 591-22-0)0 %—31.12.2020
ex29333999186-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)0 %—31.12.2017
ex2933399919Methyl nicotinate (INNM) (CAS RN 93-60-7)0 %—31.12.2020
ex2933399920Copper pyrithione powder (CAS RN 14915-37-8)0 %—31.12.2020
ex2933399921Boscalid (ISO) (CAS RN 188425-85-6)0 %—31.12.2019
ex2933399922Isonicotinic acid (CAS RN 55-22-1)0 %—31.12.2019
ex29333999232-Chloro-3-cyanopyridine (CAS RN 6602-54-6)0 %—31.12.2020
ex29333999242-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)0 %—31.12.2019
ex2933399925Imazethapyr (ISO) (CAS RN 81335-77-5)0 %—31.12.2018
ex29333999262-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)0 %—31.12.2020
ex2933399927Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)0 %—31.12.2021
ex2933399928Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)0 %—31.12.2019
ex29333999293,5-Dichloro-2-cyanopyridine (CAS RN 85331-33-5)0 %—31.12.2021
ex29333999312-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)0 %—31.12.2019
ex29333999322-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)0 %—31.12.2021
ex29333999335-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)0 %—31.12.2021
ex29333999343-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile (CAS RN 157764-10-8)0 %—31.12.2019
ex2933399935Aminopyralid (ISO) (CAS RN 150114-71-9)0 %—31.12.2018
ex29333999361-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)0 %—31.12.2022
ex2933399937Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)0 %—31.12.2021
ex29333999402-Chloropyridine (CAS RN 109-09-1)0 %—31.12.2018
ex29333999412-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)0 %—31.12.2021
ex29333999455-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole (CAS RN 102625-64-9)0 %—31.12.2019
ex2933399946Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (2)0 %—31.12.2021
ex2933399947(-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)0 %—31.12.2021
ex2933399948Flonicamid (ISO) (CAS RN 158062-67-0)0 %—31.12.2019
ex2933399950N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8)0 %—31.12.2017
ex29333999533-Bromopyridine (CAS RN 626-55-1)0 %—31.12.2018
ex2933399955Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more0 %—31.12.2019
ex2933399957Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)0 %—31.12.2017
ex2933399957Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)0 %—31.12.2022
ex29333999584-Chloro-1-methylpiperidine (CAS RN 5570-77-4)0 %—31.12.2018
ex29333999602-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)0 %—31.12.2018
ex29333999632-Aminomethyl-3-chloro-5-trifluoromethylpyridine hydrochloride (CAS RN 326476-49-7)0 %—31.12.2018
ex2933399965Acetamiprid (ISO) (CAS RN 135410-20-7)0 %—31.12.2018
ex2933399967(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)0 %—31.12.2018
ex29333999702,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)0 %—31.12.2021
ex29333999725,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4)0 %—31.12.2021
ex2933399977Imazamox (ISO) (CAS RN 114311-32-9)0 %—31.12.2018
ex29333999852-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)0 %—31.12.2020
ex2933491010Quinmerac (ISO) (CAS RN 90717-03-6)0 %—31.12.2018
ex29334910203-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)0 %—31.12.2018
ex2933491030Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)0 %—31.12.2017
ex2933491030Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)0 %—31.12.2022
ex29334910404,7-Dichloroquinoline (CAS RN 86-98-6)0 %—31.12.2019
ex29334910501-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)0 %—31.12.2020
ex2933499025Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2) for use in the formulation of herbicides0 %—31.12.2021
ex2933499025Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)0 %—31.12.2021
ex2933499030Quinoline (CAS RN 91-22-5)0 %—31.12.2020
ex2933499035[1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3)0 %—31.12.2020
ex2933499040Isoquinoline (CAS RN 119-65-3)0 %—31.12.2020
ex2933499070Quinolin-8-ol (CAS RN 148-24-3)0 %—31.12.2018
ex2933499080Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1)0 %—31.12.2018
ex2933520010Malonylurea (barbituric acid) (CAS RN 67-52-7)0 %—31.12.2021
ex29335995106-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)0 %—31.12.2019
ex29335995132-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)0 %—31.12.2018
ex2933599515Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)0 %—31.12.2018
ex2933599517N,N’-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6)0 %—31.12.2018
ex29335995181-Methyl-3-phenylpiperazine (CAS RN 5271-27-2)0 %—31.12.2020
ex29335995202,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)0 %—31.12.2018
ex2933599521N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)0 %—31.12.2020
ex29335995236-Chloro-3-methyluracil (CAS RN 4318-56-3)0 %—31.12.2018
ex29335995272-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)0 %—31.12.2018
ex2933599530Mepanipyrim (ISO) (CAS RN 110235-47-7)0 %—31.12.2018
ex29335995334,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)0 %—31.12.2019
ex29335995376-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)0 %—31.12.2019
ex29335995432-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic acid (CAS RN 7365-45-9)0 %—31.12.2019
ex29335995451-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)0 %—31.12.2019
ex29335995476-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more0 %—31.12.2020
ex29335995502-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)0 %—31.12.2019
ex29335995535-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2)0 %—31.12.2020
ex29335995575,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS RN 13223-43-3)0 %—31.12.2020
ex29335995602,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)0 %—31.12.2018
ex29335995651-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)0 %—31.12.2019
ex2933599570N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)0 %—31.12.2018
ex2933599575(2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8)0 %—31.12.2019
ex29335995773-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)0 %—31.12.2017
ex29335995773-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)0 %—31.12.2022
ex29335995875-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)0 %—31.12.2021
ex2933599588Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides0 %—31.12.2021
ex29335995ex293399808851Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides0 %—31.12.2021
ex29335995896-Benzyladenine (CAS RN 1214-39-7)0 %—31.12.2021
ex2933698013Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more0 %—31.12.2020
ex29336980152-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)0 %—31.12.2020
ex2933698017Benzoguanamine (CAS RN 91-76-9)0 %—31.12.2020
ex2933698040Troclosene sodium (INNM) (CAS RN 2893-78-9)0 %—31.12.2021
ex29336980501,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)0 %—31.12.2018
ex2933698055Terbutryn (ISO) (CAS RN 886-50-0)0 %—31.12.2020
ex2933698060Cyanuric acid (CAS RN 108-80-5)0 %—31.12.2020
ex29336980651,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)0 %—31.12.2018
ex2933698075Metamitron (ISO) (CAS RN 41394-05-2)0 %—31.12.2019
ex2933698080Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)0 %—31.12.2018
ex2933790015Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)0 %—31.12.2021
ex29337900305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %—31.12.2017
ex29337900305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %—31.12.2022
ex29337900506-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)0 %—31.12.2018
ex29337900603,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9)0 %—31.12.2019
ex2933790070(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)0 %—31.12.2020
ex29339980102-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7)0 %—31.12.2018
ex2933998011Fenbuconazole (ISO) (CAS RN 114369-43-6)0 %—31.12.2019
ex2933998012Myclobutanil (ISO) (CAS RN 88671-89-0)0 %—31.12.2019
ex29339980135-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)0 %—31.12.2021
ex29339980142-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)0 %—31.12.2018
ex29339980152-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)0 %—31.12.2018
ex2933998016Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more0 %—31.12.2020
ex2933998017Carfentrazone-ethyl (ISO) (CAS RN 128639-02-1) with a purity by weight of 93 % or more0 %—31.12.2020
ex29339980184,4'-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4)0 %—31.12.2017
ex29339980192-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)0 %—31.12.2019
ex29339980202-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)0 %—31.12.2018
ex29339980211-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)0 %—31.12.2020
ex2933998023Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more0 %—31.12.2019
ex29339980241,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)0 %—31.12.2017
ex29339980241,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)0 %—31.12.2022
ex2933998026(2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4-methylbenzenesulfonate (CUS 0143289-9)0 %—31.12.2020
ex29339980275,6-Dimethylbenzimidazole (CAS RN 582-60-5)0 %—31.12.2019
ex2933998028N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8)0 %—31.12.2017
ex29339980293-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7)0 %—31.12.2020
ex2933998030Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)0 %—31.12.2018
ex2933998031Triadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more0 %—31.12.2020
ex2933998033Penconazole (ISO) (CAS RN 66246-88-6)0 %—31.12.2019
ex29339980342,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)0 %—31.12.2021
ex29339980363-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2)0 %—31.12.2021
ex29339980378-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)0 %—31.12.2019
ex2933998038(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)0 %—31.12.2021
ex2933998039O-(benzotriazol-1-yl)-N,N,N’,N’-tetramethyluronium tetrafluoroborate (CAS RN 125700-67-6)0 %—31.12.2021
ex2933998040trans-4-Hydroxy-L-proline (CAS RN 51-35-4)0 %—31.12.2018
ex29339980415-[4′-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)0 %—31.12.2022
ex2933998042(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)0 %—31.12.2021
ex29339980432,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7)0 %—31.12.2017
ex2933998044(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)0 %—31.12.2021
ex2933998045Maleic hydrazide (ISO) (CAS RN 123-33-1)0 %—31.12.2018
ex2933998046(S)-indoline-2-carboxylic acid (CAS RN 79815-20-6)0 %—31.12.2022
ex2933998047Paclobutrazol (ISO) (CAS RN 76738-62-0)0 %—31.12.2017
ex2933998047Paclobutrazol (ISO) (CAS RN 76738-62-0)0 %—31.12.2022
ex2933998050Metconazole (ISO) (CAS RN 125116-23-6)3,2 %—31.12.2018
ex2933998051Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides0 %—31.12.2021
ex2933998052N-Boc-trans-4-Hydroxy-L-proline methyl ester (CAS RN 74844-91-0)0 %—31.12.2020
ex2933998053Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1)0 %—31.12.2018
ex2933998053Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1)0 %—31.12.2018
ex29339980543-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)0 %—31.12.2020
ex2933998055Pyridaben (ISO) (CAS RN 96489-71-3)0 %—31.12.2019
ex29339980572-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)0 %—31.12.2018
ex29339980621H-Indole-6-carboxylic acid (CAS RN 1670-82-2)0 %—31.12.2018
ex2933998067Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)0 %—31.12.2021
ex293399807110-Methoxyiminostilbene (CAS RN 4698-11-7)0 %—31.12.2018
ex29339980721,4,7-Trimethyl-1,4,7-Triazacyclononane0 %—31.12.2018
ex29339980721,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)0 %—31.12.2018
ex2933998074Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2)0 %—31.12.2018
ex29339980783-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)0 %—31.12.2018
ex29339980811,2,3-Benzotriazole (CAS RN 95-14-7)0 %—31.12.2021
ex2933998082Tolytriazole (CAS RN 29385-43-1)0 %—31.12.2018
ex2933998089Carbendazim (ISO) (CAS RN 10605-21-7)0 %—31.12.2018
ex2934100010Hexythiazox (ISO) (CAS RN 78587-05-0)0 %—31.12.2018
ex29341000154-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)0 %—31.12.2017
ex29341000154-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)0 %—31.12.2022
ex29341000202-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)0 %—31.12.2018
ex2934100025(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)0 %—31.12.2017
ex2934100035(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)0 %—31.12.2017
ex2934100025(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)0 %—31.12.2022
ex2934100035(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)0 %—31.12.2022
ex2934100040(Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7)0 %—31.12.2018
ex29341000452-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)0 %—31.12.2019
ex2934100060Fosthiazate (ISO) (CAS RN 98886-44-3)0 %—31.12.2019
ex29341000803,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)0 %—31.12.2021
ex2934208015Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)0 %kg31.12.2022
ex29342080302-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)0 %—31.12.2021
ex29342080401,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)0 %—31.12.2017
ex29342080401,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)0 %—31.12.2022
ex2934208050S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9)0 %—31.12.2018
ex2934208060Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)0 %—31.12.2020
ex2934208070N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)0 %—31.12.2020
ex29343090102-Methylthiophenothiazine (CAS RN 7643-08-5)0 %—31.12.2017
ex29343090102-Methylthiophenothiazine (CAS RN 7643-08-5)0 %—31.12.2022
ex2934999010Fluralaner (INN) (CAS RN 864731-61-3)0 %—31.12.2019
ex2934999011Methyl 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene-2-carboxylate (CAS RN 1026785-65-8)0 %—31.12.2018
ex2934999012Dimethomorph (ISO) (CAS RN 110488-70-5)0 %—31.12.2018
ex2934999013Buprofezin (ISO) of a purity by weight of 98,5 % or more (CAS RN 953030-84-7)0 %—31.12.2018
ex2934999014Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2)0 %—31.12.2017
ex2934999015Carboxin (ISO) (CAS RN 5234-68-4)0 %—31.12.2018
ex2934999016Difenoconazole (ISO) (CAS RN 119446-68-3)0 %—31.12.2019
ex29349990183,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0)0 %—31.12.2017
ex29349990192-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3)0 %—31.12.2019
ex2934999020Thiophene (CAS RN 110-02-1)0 %—31.12.2019
ex29349990227-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)0 %—31.12.2017
ex2934999023Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)0 %—31.12.2021
ex2934999024Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more0 %—31.12.2019
ex29349990252,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)0 %—31.12.2020
ex29349990264-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)0 %—31.12.2019
ex29349990272-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)0 %—31.12.2019
ex293499902811-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)0 %—31.12.2021
ex2934999030Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)0 %—31.12.2019
ex2934999031Uridine 5′-diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1)0 %—31.12.2020
ex2934999032Uridine 5′-diphosphoglucuronic acid trisodium salt (CAS RN 63700-19-6)0 %—31.12.2020
ex29349990347-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4)0 %—31.12.2020
ex2934999035Dimethenamide (ISO) (CAS RN 87674-68-8)0 %—31.12.2018
ex2934999036Oxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more0 %—31.12.2020
ex29349990374-Propan-2-ylmorpholine (CAS RN 1004-14-4)0 %—31.12.2017
ex2934999038Clomazone (ISO) (CAS RN 81777-89-1) with a purity by weight of 96 % or more0 %—31.12.2020
ex29349990374-Propan-2-ylmorpholine (CAS RN 1004-14-4)0 %—31.12.2022
ex29349990394-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)0 %—31.12.2020
ex293499904111-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)0 %—31.12.2020
ex29349990421-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)0 %—31.12.2019
ex2934999044Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more0 %—31.12.2020
ex2934999045Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione (CAS RN 2451-62-9)0 %—31.12.2018
ex29349990464-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)0 %—31.12.2021
ex2934999047Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides0 %—31.12.2021
ex2934999048Propan-2-ol – 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)0 %—31.12.2021
ex2934999049Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)0 %—31.12.2021
ex293499905010-[1,1'-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1)0 %—31.12.2020
ex2934999052Epoxiconazole (ISO) (CAS RN 133855-98-8)0 %—31.12.2022
ex29349990534-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)0 %—31.12.2021
ex29349990542-benzyl-2-dimethylamino-4′-morpholinobutyrophenone (CAS RN 119313-12-1)0 %kg31.12.2022
ex29349990561-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)0 %—31.12.2022
ex2934999057(6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709-09-3)0 %—31.12.2022
ex2934999058Dimethenamide-P (CAS RN 163515-14-8)0 %—31.12.2018
ex2934999060DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)0 %—31.12.2018
ex2934999066Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)0 %—31.12.2018
ex29349990721-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4)0 %—31.12.2018
ex29349990742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %—31.12.2017
ex29349990742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %—31.12.2022
ex2934999075(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)0 %—31.12.2021
ex29349990ex3204200076102,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)0 %—31.12.2021
ex2934999079Thiophen-2-ethanol (CAS RN 5402-55-1)0 %—31.12.2018
ex2934999083Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more0 %—31.12.2019
ex2934999084Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more0 %—31.12.2019
ex2934999086Dithianon (ISO) (CAS RN 3347-22-6)0 %—31.12.2020
ex29349990872,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)0 %—31.12.2020
ex2935909010Florasulam (ISO) (CAS RN 145701-23-1)0 %—31.12.2019
ex2935909015Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)0 %—31.12.2018
ex29359090176-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1)0 %—31.12.2018
ex2935909020Toluenesulphonamides0 %—31.12.2018
ex2935909023N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)0 %—31.12.2021
ex2935909025Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)0 %—31.12.2018
ex2935909027Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)0 %—31.12.2021
ex2935909028N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)0 %—31.12.2018
ex29359090306-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)0 %—31.12.2021
ex2935909035Chlorsulfuron (ISO) (CAS RN 64902-72-3)0 %—31.12.2018
ex2935909042Penoxsulam (ISO) (CAS RN 219714-96-2)0 %—31.12.2020
ex2935909043Oryzalin (ISO) (CAS RN 19044-88-3)0 %—31.12.2019
ex2935909045Rimsulfuron (ISO) (CAS RN 122931-48-0)0 %—31.12.2018
ex2935909047Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more0 %—31.12.2019
ex2935909048(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)0 %—31.12.2021
ex29359090504,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)0 %—31.12.2018
ex2935909052(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2)0 %—31.12.2020
ex29359090532,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)0 %—31.12.2019
ex2935909054Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more0 %—31.12.2020
ex2935909055Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)0 %—31.12.2018
ex2935909056N-(p-Toluenesulphonyl)-N’-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)0 %—31.12.2020
ex2935909057N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)0 %—31.12.2020
ex29359090581-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8)0 %—31.12.2020
ex2935909059Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more0 %—31.12.2020
ex2935909063Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more0 %—31.12.2019
ex2935909065Tribenuron-methyl (ISO) (CAS RN 101200-48-0)0 %—31.12.2018
ex2935909067N-(2-phenoxyphenyl)methanesulphonamide (CAS RN 51765-51-6)0 %—31.12.2021
ex2935909073(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)0 %—31.12.2017
ex2935909073(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)0 %—31.12.2022
ex2935909075Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)0 %—31.12.2018
ex2935909077[[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)0 %—31.12.2019
ex2935909085N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride0 %—31.12.2018
ex2935909088N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)0 %—31.12.2018
ex29359090893-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)0 %—31.12.2021
ex2938903010Ammonium glycyrrhizate (CAS RN 53956-04-0)0 %—31.12.2020
ex2938909010Hesperidin (CAS RN 520-26-3)0 %—31.12.2018
ex2938909020Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)0 %—31.12.2018
ex2938909030Rebaudioside A (CAS RN 58543-16-1)0 %—31.12.2022
ex2938909040Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages0 %—31.12.2022
ex2940000030D(+)- Trehalose dihydrate (CAS RN 6138-23-4)0 %—31.12.2021
ex29400000401,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)0 %—31.12.2019
ex2941203010Dihydrostreptomycin sulphate (CAS RN 5490-27-7)0 %—31.12.2021
ex2942000010Sodium triacetoxyborohydride (CAS RN 56553-60-7)0 %—31.12.2021
32012000Wattle extract0 %—31.12.2018
ex3201909020Tanning extracts derived from gambier and myrobalan fruits0 %—31.12.2018
ex32019090ex320290004010Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)0 %—31.12.2020
ex3204110015Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight0 %—31.12.2018
ex3204110020Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight0 %—31.12.2020
ex3204110025N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)0 %—31.12.2019
ex3204110030Preparation of dispersion dyes, containing:C.I. Disperse Orange 61,C.I. Disperse Blue 291:1,C.I. Disperse Violet 93:1,C.I. Disperse Red 540 %—31.12.2020
ex3204110035Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 content of 50 % or more0 %—31.12.2022
ex3204110040Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight0 %—31.12.2021
ex3204110045Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 or Disperse Orange 288,C.I. Disperse Blue 291:1,C.I. Disperse Violet 93:1,whether or not containing C.I. Disperse Red 540 %—31.12.2020
ex3204110050Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight0 %—31.12.2021
ex3204110060Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight0 %—31.12.2021
ex3204110070Colourant C.I. Disperse Red 343 (CAS RN 99035-78-6) and preparations based thereon with a colourant C.I. Disperse Red 343 content of 95 % or more by weight0 %—31.12.2017
ex3204110080Dye preparation, non-ionogenic, containing:N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) andN-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)0 %—31.12.2017
ex3204120010Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight0 %—31.12.2021
ex3204120015Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight0 %—31.12.2021
ex3204120017Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight0 %—31.12.2021
ex3204120020Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0)0 %—31.12.2017
ex3204120025Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight0 %—31.12.2021
ex3204120027Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight0 %—31.12.2021
ex3204120030Acid dye preparation, anionic, containing:lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),C.I. Acid Green 25 (CAS RN 4403-90-1) andC.I. Acid Blue 80 (CAS RN 4474-24-2)0 %—31.12.2017
ex3204120035Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight0 %—31.12.2021
ex3204120037Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight0 %—31.12.2021
ex3204120040Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)0 %—31.12.2018
ex3204120045Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight0 %—31.12.2021
ex3204120047Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight0 %—31.12.2021
ex3204120050Colourant C.I. Acid Blue 80 (CAS RN 4474-24-2) and preparations based thereon with a colourant C.I. Acid Blue 80 content of 99 % or more by weight0 %—31.12.2018
ex3204120055Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight0 %—31.12.2021
ex3204120057Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight0 %—31.12.2021
ex3204120060Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight0 %—31.12.2019
ex3204120065Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight0 %—31.12.2021
ex3204120070Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight0 %—31.12.2020
ex3204130010Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight0 %—31.12.2021
ex3204130020(2,2'-(3,3'-Dioxidobiphenyl-4,4'-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1)0 %—31.12.2017
ex3204130030Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight0 %—31.12.2017
ex3204130040Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight0 %—31.12.2017
ex3204130030Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight0 %—31.12.2018
ex3204130040Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight0 %—31.12.2022
ex3204130050Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight0 %—31.12.2019
ex3204130060Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight0 %—31.12.2019
ex3204140010Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight0 %—31.12.2019
ex3204140020Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight0 %—31.12.2019
ex3204140030C.I. Colourant Direct Red 23 (CAS RN 3441-14-3) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight0 %—31.12.2019
ex3204140040Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) and preparations based thereon with a colourant C.I. Direct Black 168 content by weight of 75 % or more, in powder form for leather dyeing0 %—31.12.2021
ex3204150060Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight0 %—31.12.2018
ex3204150070Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)0 %—31.12.2018
ex3204150080Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight0 %—31.12.2022
ex3204160020Colourant Reactive Black 5 (CAS RN 17095-24-8) and preparations based thereon with a colourant Reactive Black 5 content of 60 % or more but not more than 75 % by weight, and including one or more of the following:Colourant Reactive Yellow 201 (CAS RN 27624-67-5),1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)0 %—31.12.2019
ex3204160030Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:Colourant Reactive Yellow 201 (CAS RN 27624-67-5),1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)0 %—31.12.2019
ex3204170010Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight0 %—31.12.2018
ex3204170012Colourant C.I. Pigment Orange 64 (CAS RN 72102-84-2) and preparations based thereon with a colourant C.I. colourant orange 64 content of 90 % or more by weight0 %—31.12.2019
ex3204170015Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight0 %—31.12.2021
ex3204170016Colourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Pigment Red 49:2 content of 60 % or more by weight0 %—31.12.2020
ex3204170017Colourant C.I. Pigment Red 12 (CAS RN 6410-32-8) and preparations based thereon with a colourant C.I. Pigment Red 12 content of 35 % or more by weight0 %—31.12.2019
ex3204170018Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight0 %—31.12.2021
ex3204170019Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight0 %—31.12.2018
ex3204170020Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight0 %—31.12.2021
ex3204170021Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight0 %—31.12.2019
ex3204170022Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight0 %—31.12.2021
ex3204170023Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)0 %—31.12.2019
ex3204170024Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight0 %—31.12.2018
ex3204170025Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight0 %—31.12.2021
ex3204170026Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight0 %—31.12.2022
ex3204170033Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight0 %—31.12.2020
ex3204170035Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight0 %—31.12.2021
ex3204170040Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight0 %—31.12.2019
ex3204170045Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight0 %—31.12.2018
ex3204170060Colourant C.I. Pigment Red 53:1 (CAS RN 5160-02-1) and preparations based thereon with a colourant C.I. Pigment Red 53:1 content of 50 % or more by weight0 %—31.12.2021
ex3204170065Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight0 %—31.12.2021
ex3204170067Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight.0 %—31.12.2018
ex3204170075Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight0 %—31.12.2017
ex3204170080Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight0 %—31.12.2017
ex3204170085Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight0 %—31.12.2017
ex3204170088Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight0 %—31.12.2017
ex3204170075Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight0 %—31.12.2022
ex3204170080Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight0 %—31.12.2022
ex3204170085Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight0 %—31.12.2022
ex3204170088Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight0 %—31.12.2022
ex3204190012Colourant C.I. Solvent Violet 49 (CAS RN 205057-15-4)0 %—31.12.2019
ex3204190013Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight0 %—31.12.2021
ex3204190014Red colourant preparation, in a form of wet paste, containing by weight:35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1)not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9)not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5)55 % or more but not more than 65 % of water0 %—31.12.2019
ex3204190016Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight0 %—31.12.2022
ex3204190021Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6)0 %—31.12.2019
ex3204190043Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2)0 %—31.12.2018
ex3204190047Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4)0 %—31.12.2018
ex3204190052Colourant C.I. Solvent Red 135 (CAS RN 20749-68-2) and preparations based thereon with a colourant C.I. Solvent Red 135 content of 95 % or more by weight0 %—31.12.2021
ex3204190053Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3)0 %—31.12.2018
ex3204190055Photochromic dye, 4, 4'-(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6)0 %—31.12.2018
ex3204190057Photochromic dye, bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate (CUS 0133729-7)0 %—31.12.2018
ex3204190063Photochromic dye, 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5)0 %—31.12.2018
ex3204190070Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight0 %—31.12.2018
ex3204190071Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight0 %—31.12.2020
ex3204190073Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight0 %—31.12.2020
ex3204190077Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight0 %—31.12.2021
ex3204190084Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight0 %—31.12.2017
ex3204190085Colourant C.I. Solvent Red HPR (CAS RN 75198-96-8) and preparations based thereon with a colourant C.I. Solvent Red HPR content of 95 % or more by weight0 %—31.12.2017
ex3204190084Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight0 %—31.12.2022
ex3204200030Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight0 %—31.12.2021
ex3204900010Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight0 %—31.12.2019
ex3204900020Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % C.I. Solvent Red 1750 %—31.12.2022
ex3205000010Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry0 %—31.12.2018
ex3205000020Dye C.I. Carbon Black 7 Lake0 %—31.12.2017
ex3206110010Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate0 %—31.12.2018
ex3206190010Preparation containing by weight:72 % (± 2 %) of mica (CAS RN 12001-26-2) and28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)0 %—31.12.2021
ex3206420010Lithopone (CAS RN 1345-05-7)0 %—31.12.2018
ex3206497010Non aqueous dispersion, containing by weight:57 % or more but not more than 63 % of aluminium oxide (CAS RN 1344-28-1)37 % or more but not more than 42 % of titanium dioxide (CAS RN13463-67-7), and1 % or more but not more than 2 % of triethoxycaprylyl silane (CAS RN 2943-75-1)0 %—31.12.2018
ex3206497020Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)0 %—31.12.2019
ex3206497030Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a colourant C.I. Pigment Black 12 content of 50 % or more by weight0 %—31.12.2022
32065000Inorganic products of a kind used as luminophores0 %—31.12.2018
ex3207300010Preparation containing:not more than 85 % by weight of silver,not less than 2 % by weight of palladium,barium titanate,terpineol, andethyl cellulose,used for screen printing in the manufacture of multilayer ceramic capacitors0 %—31.12.2018
ex3207300020Printing paste containing30 % by weight or more, but not more than 50 % of silver and8 % by weight or more, but not more than 17 % of palladium0 %—31.12.2019
ex3207408520Glass flakes coated with silver, of an average diameter of 40 (± 10) μm0 %—31.12.2018
ex3207408540Glass flakes (CAS RN 65997-17-3):of a thickness of 0,3 μm or more but not more than 10 μm, andcoated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)0 %—31.12.2017
ex3207408540Glass flakes (CAS RN 65997-17-3):of a thickness of 0,3 μm or more but not more than 10 μm, andcoated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)0 %—31.12.2022
ex3208101010Thermoplastic polyester copolymer resin with a solid content of 30 % or more but not more than 50 %, in organic solvents0 %—31.12.2020
ex3208109010Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer0 %—31.12.2018
ex3208201010Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer0 %—31.12.2018
ex3208201020Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether0 %—31.12.2018
ex3208901910Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol0 %—31.12.2018
ex3208901915Chlorinated polyolefins, in a solution0 %—31.12.2018
ex3208901920Preparation of 5 % or more but not more than 20 % by weight of propylene maleic anhydride copolymer or a blend of polypropylene and propylene maleic anhydride copolymer in an organic solvent0 %—31.12.2020
ex32089019ex320890912520Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight0 %—31.12.2017
ex3208901935Silicones containing 50 % by weight or more of xylene of a kind used for the manufacture of long term surgical implants0 %—31.12.2018
ex32089019ex320890912520Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight0 %—31.12.2022
ex3208901940Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane0 %—31.12.2018
ex32089019ex382499924563Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate0 %—31.12.2018
ex3208901947Solution containing by weight:0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)0 %—31.12.2021
ex3208901950Solution containing by weight:(65 ± 10) % of γ-butyrolactone,(30 ± 10) % of polyamide resin,(3,5 ± 1,5) % of naphthoquinone ester derivative and(1,5 ± 0,5) % of arylsilicic acid0 %—31.12.2018
ex3208901960Copolymer of hydroxystyrene with one or more of the following:styrenealkoxystyrenealkylacrylatesdissolved in ethyl lactate0 %—31.12.2021
ex3208901965Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants0 %—31.12.2018
ex3208901975Acenaphthalene copolymer in ethyl lactate solution0 %—31.12.2017
ex3208901975Acenaphthalene copolymer in ethyl lactate solution0 %—31.12.2022
ex3208909910Solution based on chemically modified natural polymers, containing two or more of the following dyes:methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3'-naphtho[2,1-b][1,4]oxazine]-9'-carboxylate,methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol0 %—31.12.2018
ex32151190ex321519901010Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments0 %—31.12.2018
ex3215199020Ink:consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),with a total solid content by weight of 55 % or more, but not more than 57 %, andwith a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,used to imprint electrodes0 %l31.12.2017
ex32151100ex321519001010Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments0 %—31.12.2018
ex3215190020Ink:consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),with a total solid content by weight of 55 % or more, but not more than 57 %, andwith a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,for use in the manufacture of electrodes0 %l31.12.2022
ex3215907010Ink formulation, for use in the manufacture of ink-jet cartridges0 %—31.12.2018
ex3215907020Heat sensitive ink fixed on a plastic film0 %—31.12.2018
ex3215907030Disposable cartridge ink, containing by weight:1 % or more, but not more than 10 % of amorphous silicon dioxide or3,8 % or more of dye C.I. Solvent Black 7 in organic solventsfor use in the marking of integrated circuits0 %—31.12.2018
ex3215907030Disposable cartridge ink, containing by weight:1 % or more, but not more than 10 % of amorphous silicon dioxide or3,8 % or more of dye C.I. Solvent Black 7 in organic solventsfor use in the marking of integrated circuits0 %—31.12.2018
ex3215907040Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:wax;a vinyl-based polymer anda colouring agentfor use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices0 %—31.12.2020
33011210Essential oil of orange, not deterpenated0 %—31.12.2018
ex3402119010Sodium lauroyl methyl isethionate0 %—31.12.2020
ex3402130010Vinyl copolymer surface active agent based on polypropylene glycol0 %—31.12.2018
ex3402130020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %—31.12.2017
ex3402130020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %—31.12.2022
ex3402130030Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142–34–6)0 %—31.12.2018
ex3402901010Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides0 %—31.12.2019
ex3402901020Mixture of docusate sodium (INN) and sodium benzoate0 %—31.12.2018
ex3402901030Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1)0 %—31.12.2020
ex3402901050Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)0 %—31.12.2020
ex3402901060Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane0 %—31.12.2020
ex3402901070Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)0 %—31.12.2019
ex3403990010Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides0 %—31.12.2018
ex3505105020O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0)0 %—31.12.2018
ex35069110ex350691901010Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)0 %—31.12.2018
ex35069110ex350691903030Two component microencapsulated epoxy adhesive dispersed in a solvent0 %—31.12.2018
ex35069110ex350691904040Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)0 %—31.12.2019
ex35069110ex350691905050Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymersDissolved in:Methyl ethyl ketone (CAS RN 78-93-3)Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)0 %—31.12.2020
ex35069110ex350691905050Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymersdissolved in:Methyl ethyl ketone (CAS RN 78-93-3)Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)0 %—31.12.2020
ex3506919060Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 65 % or more but not more than 75 %0 %l31.12.2022
ex3506919070Temporary wafer-bonding release in form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight0 %l31.12.2022
ex3507909010Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products0 %—31.12.2019
ex3507909020Creatine amidinohydrolase (CAS RN 37340-58-2)0 %—31.12.2020
ex3507909030Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution withan enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml,a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 % anda pH value of 6,5 or more, but not more than 8,50 %—31.12.2021
ex3601000010Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators0 %—31.12.2021
ex3603006010Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 25,25 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 6,9 mm (± 0,3 mm)0 %—31.12.2022
ex3701300020Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm0 %—31.12.2019
ex3701300030Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm0 %—31.12.2018
ex3701990010Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 85420 %—31.12.2018
ex3705009010Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers0 %—31.12.2019
ex3707100010Photosensitive emulsion for the sensitization of silicon discs0 %—31.12.2018
ex3707100015Sensitising emulsion consisting of:by weight not more than 12 % of diazooxonaphthalenesulphonic acid esterphenolic resinsin a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone0 %—31.12.2018
ex3707100025Sensitising emulsion containing:phenolic or acrylic resinsa maximum 2 % by weight of light sensitive acid precursor,in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate0 %—31.12.2018
ex3707100030Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate0 %—31.12.2018
ex3707100035Sensitising emulsion or preparation containing one or more of:acrylate polymers,methacrylate polymers,derivatives of styrene polymers,containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate0 %—31.12.2021
ex3707100040Sensitising emulsion, containing:not more than 10 % by weight of naphthoquinonediazide esters,2 % or more but not more than 35 % by weight of copolymers of hydroxystyrenenot more than 7 % by weight of epoxy-containing derivativesdissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate0 %—31.12.2021
ex3707100045Photosensitive emulsion consisting of cyclized polyisoprene containing:55 % or more but not more than 75 % by weight of xylene and12 % or more but not more than 18 % by weight of ethylbenzene0 %—31.12.2019
ex3707100050Photosensitive emulsion containing by weight:20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,5 % or more but not more than 30 % of acrylates,not more than 12 % of a photoinitiator0 %—31.12.2019
ex3707100055Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidone with a polymer content by weight 10 % or more0 %—31.12.2018
ex3707902910Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %—31.12.2018
ex3707902920Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %—31.12.2018
ex3707902940Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %—31.12.2018
ex3707902950Dry ink powder or toner blend, consisting of:styrene acrylate/butadiene copolymereither carbon black or an organic pigmentwhether or not containing polyolefin or amorphous silicafor use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers0 %—31.12.2017
ex3707902950Dry ink powder or toner blend, consisting of:styrene acrylate/butadiene copolymereither carbon black or an organic pigmentwhether or not containing polyolefin or amorphous silicafor use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers0 %—31.12.2022
ex3801900010Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)0 %—31.12.2021
ex3801900020Pitch coated graphite based powder with:an average particle size of 10,8 μm or more but not more than 13,0 μm,an iron content of less than 40 ppm,a copper content of less than 5 ppm,a nickel content of less than 5 ppm,an average surface area (N2 atmosphere) of 3,0 m2/g or more but not more than 4,36 m2/g, anda magnetic metal impurity of less than 0,3 ppm0 %kg31.12.2022
ex3802100010Mixture of activated carbon and polyethylene, in form of powder0 %—31.12.2020
ex3802900011Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products0 %—31.12.2017
38059010Pine oil1,7 %—31.12.2018
ex38069000ex390940001060Phenolic modified derivative of rosin resin,containing by weight 50 % or more but not more than 75 % of rosin esters,with an acid value of not more than 25,of a kind used in offset printing0 %—31.12.2021
ex3808919010Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide0 %—31.12.2018
ex3808919030Preparation containing endospores or spores and protein crystals derived from either:Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,Bacillus thuringiensis subsp. kurstaki or,Bacillus thuringiensis subsp. israelensis or,Bacillus thuringiensis subsp. aizawai or,Bacillus thuringiensis subsp. tenebrionis0 %—31.12.2019
ex3808919040Spinosad (ISO)0 %—31.12.2018
ex3808919060Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn J) and (3'-ethoxy- spinosyn L)0 %—31.12.2017
ex3808919060Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L)0 %—31.12.2022
ex3808923010Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more0 %—31.12.2020
ex3808929010Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale0 %—31.12.2018
ex3808929030Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:24 % or more but not more than 26 % of pyrithione zinc (INN), or39 % or more but not more than 41 % of pyrithione zinc (INN)0 %—31.12.2018
ex3808929050Preparations based on copper pyrithione (CAS RN 14915-37-8)0 %—31.12.2019
ex3808931510Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension0 %—31.12.2017
ex3808932310Herbicide containing flazasulfuron (ISO) as an active ingredient0 %—31.12.2019
ex3808932740Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight:30 % or more of tepraloxydim (ISO) andnot more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons0 %—31.12.2021
ex3808939010Preparation, in the form of granules, containing by weight:38,8 % or more but not more than 41,2 % of Gibberellin A3, or9,5 % or more but not more than 10,5 % of Gibberellin A4 and A70 %—31.12.2019
ex3808939020Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amineof a kind used in plant growth regulators0 %—31.12.2020
ex3808939030Aqueous solution containing by weight:1,8 % of sodium para-nitrophenolate,1,2 % of sodium ortho-nitrophenolate,0,6 % of sodium 5-nitroguaiacolatefor use in the manufacture of a plant growth regulator0 %—31.12.2020
ex3808939040Mixed white powder containing by weight:3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 % andcontaining less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropenefor use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator0 %—31.12.2020
ex3808939050Preparation in the form of powder, containing by weight:55 % or more of Gibberellin A4,1 % or more but not more than 35 % of Gibberellin A7,90 % or more of Gibberellin A4 and Gibberellin A7 combinednot more than 10 % of a combination of water and other naturally occurring Gibberellinsof a kind used in plant growth regulators0 %—31.12.2020
ex3808942030Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)0 %—31.12.2019
ex3808999010Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water0 %—31.12.2020
ex3808999020Abamectin (ISO) (CAS RN 71751-41-2)0 %—31.12.2018
ex3809910010Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate0 %—31.12.2018
ex3809920020Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol0 %—31.12.2019
ex3810100010Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:70 % or more, but not more than 90 % of tinnot more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indiumfor use in the electro technical industry0 %—31.12.2018
ex3811190010Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:4,9 % of 1,2,4-trimethyl-benzene,4,9 % of naphthalene, and0,5 % of 1,3,5-trimethyl-benzene0 %—31.12.2019
ex3811210010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0 %—31.12.2018
ex3811210011Dispersing agent and oxidation inhibitor containing:o-amino polyisobutylenephenol (CAS RN 78330-13-9),more than 30 % by weight but not more than 50 % by weight of mineral oils,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2021
ex3811210012Dispersing agent containing:esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),35 % or more but not more than 55 % by weight of mineral oils andwith a chlorine content of not more than 0,05 % by weight,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
ex3811210013Additives containing:borated magnesium (C16-C24) alkylbenzene sulphonates andmineral oils,having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210014Dispersing agent:containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),containing 35 % or more but not more than 55 % by weight of mineral oils,with a chlorine content by weight of not more than 0,05 %,having a total base number of less than 15,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
ex3811210015Additives, consisting of:zinc bis[bis(tetrapropylenephenyl)] bis(hydrogen dithiophosphate) (CAS RN 11059-65-7),triphenyl thiophosphate (CAS RN 597-82-0),triphenyl phosphite (CAS RN 101-02-0), andmineral oils,for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210016Detergent containing:Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)40 % or more but not more than 60 % by weight of mineral oils andhaving a total base number more than 120used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
ex3811210017Additives containing:mainly sulphurized diisobutylene,calcium sulphonate,dialkylaminoalkyl polyisobutylene succinate, andmineral oils,for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210018Detergent containing:long chain alkyltoluene calcium sulphonates,more than 30 % but not more than 50 % by weight of mineral oils, andhaving a total base number of more than 310 but not more than 340,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
ex3811210019Additives containing:a polyisobutylene succinimide based mixture, andmore than 30 % but not more than 50 % by weight of mineral oils,having a total base number of more than 40, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811210020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil0 %—31.12.2018
ex3811210025Additives containing:a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10000 but not more than 20000, andmore than 15 %, but not more than 30 % by weight of mineral oils,for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210027Additives containing:20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, andmineral oils,for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2017
ex3811210030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
ex3811210033Additives containing:calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), andmineral oils,having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils0 %—31.12.2018
ex3811210035Additives containing:o-amino polyisobutylenephenol (CAS RN 78330-13-9),polyisobutylene succinimide (CAS RN 84605-20-9),alkenylimidazoline (CAS RN 68784-17-8),nonylated diphenylamine derivatives (CAS RN 36878-20-3 and CAS RN 27177-41-9), andmore than 30 %, but not more than 45 % by weight of mineral oils,for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210037Additives containing:a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, andmore than 50 % but not more than 75 % by weight of mineral oils,for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210045Additives containing:an (C8-18) alkyl methacrylate and N-[3-(dimethylamino)propyl]methacrylamide copolymer,an ethylene-propylene copolymer,an ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitrophenyl) aniline and 3-nitroaniline, andmore than 15 % but not more than 30 % by weight of mineral oils,whether or not containing a methacrylic pour point depressant polymer, for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210048Additives containing:overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) andby weight more than 25 % but not more than 50 % of mineral oils,having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811210050Additives for lubricating oils,based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),containing mineral oils,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2017
ex3811210050Additives for lubricating oils,based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),containing mineral oils,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
ex3811210053Additives containing:overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811210055Additives containing:low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811210057Additives containing:a polyisobutylene succinimide based mixture, andmore than 40 % but not more than 50 % by weight of mineral oils,having a total base number of more than 40, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811210060Additives for lubricating oils, containing mineral oils,based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2017
ex3811210060Additives for lubricating oils, containing mineral oils,based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
ex3811210063Additives containing:an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811210065Additives containing:a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), andmore than 35 % but not more than 50 % by weight of mineral oils,having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811210070Additives for lubricating oils,containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2017
ex3811210070Additives for lubricating oils,containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
ex3811210073Additives containing:borated succinimide compounds (CAS RN 134758-95-5),mineral oils, andhaving a total base number (TBN) greater than 40,for use in the manufacture of additive mixtures for lubricating oils0 %—31.12.2018
ex3811210075Additives containing:Calcium (C10-C14) dialkylbenzenesulfonates,more than 40 %, but not more than 60 % by weight of mineral oils,with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
ex3811210077Antifoam additives consisting of:a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, andmore than 50 % but not more than 80 % by weight of mineral oilsfor use in the manufacture of additive blends for lubricating oils0 %—31.12.2020
ex3811210080Additives containing:polyisobutylene aromatic polyamine succinimide,more than 40 % but not more than 60 % by weight of mineral oils,with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils0 %—31.12.2020
ex3811210083Additives containing:polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing more than 31,9 % but not more than 43,3 % by weight of mineral oils,not more than 0,05 % by weight chlorine, andhaving a total base number (TBN) greater than 20,for use in the manufacture of additives blends for lubricating oils0 %—31.12.2019
ex3811210085Additives,containing more than 20 % but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,of a kind used in the manufacture of blends of additives for lubricating oils0 %—31.12.2017
ex3811210085Additives,containing more than 20 % or more but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,of a kind used in the manufacture of blends of additives for lubricating oils0 %—31.12.2022
ex3811290015Additives containing:products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9) andmore than15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent,for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811290020Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2017
ex3811290020Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2022
ex3811290025Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811290030Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2017
ex3811290030Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
ex3811290035Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811290040Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2017
ex3811290040Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2022
ex3811290045Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils0 %—31.12.2019
ex3811290050Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2017
ex3811290055Additives consisting of reaction products of diphenylamine and branched nonenes with:by weight more than 28 %, but not more than 35 % of 4-monononyldiphenylamine, andby weight more than 50 % but not more than 65 % of 4,4'-dinonyldiphenylamine,by weight a total percentage of 2, 4-dinonyldiphenylamine and 2, 4'-dinonyldiphenylamine of not more than 5 %,used for the manufacture of lubricating oils0 %—31.12.2019
ex3811290050Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2022
ex3811290060Additives containing:mainly sulphurized diisobutylene,calcium sulphonate, anddialkylaminoalkyl polyisobutylene succinatefor use in the manufacture of lubricating oils0 %—31.12.2018
ex3811290065Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2020
ex3811290070Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811290075Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils0 %—31.12.2021
ex3811290080Additives containing:more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), andmore than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811290085Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils0 %—31.12.2018
ex3811900010Dinonylnaphthylsulphonic acid salt, in a mineral oil solution0 %—31.12.2018
ex3811900040Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % of 2-ethylhexanol0 %—31.12.2017
ex3811900040Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % of 2-ethylhexanol0 %—31.12.2022
ex3811900050Corrosion inhibitor containing:polyisobutenyl succinic acid andmore than 5 % and not more than 20 % by weight of mineral oilsfor use in the manufacture of blends of additives for fuels0 %—31.12.2021
ex3812100010Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)0 %—31.12.2021
ex3812209010Plasticiser, containing:bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)0 %—31.12.2018
ex38123910104,4'-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6)0 %—31.12.2019
ex3812399020Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate0 %—31.12.2018
ex3812399025UV photo stabiliser containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), andmethyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)0 %—31.12.2018
ex3812399030Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol0 %—31.12.2019
ex3812399035Mixture containing by weight:25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)not more than 20 % of other organic compoundson a carrier of polypropylene (CAS RN 9003-07-0)0 %—31.12.2018
ex3812399040Mixture of:80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate0 %—31.12.2018
ex3812399055UV-stabilizer, containing:2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) andeither N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) orN,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)0 %—31.12.2021
ex3812399065Stabiliser for plastic material containing:2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)0 %—31.12.2021
ex3812399070Light stabiliser containing:branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and1-methoxy-2-propyl acetate (CAS RN 108-65-6)0 %—31.12.2021
ex3812399080UV-stabilizer, consisting of:a hindered amine: N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) andeither an o-hydroxyphenyl triazine UV light absorber ora chemically modified phenolic compound0 %—31.12.2017
ex3812399080UV-stabilizer, consisting of:a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) andeither an o-hydroxyphenyl triazine UV light absorber ora chemically modified phenolic compound0 %—31.12.2022
ex3814009020Mixture containing by weight:69 % or more but not more than 71 % of 1-methoxypropan-2-ol,29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate0 %—31.12.2018
ex3814009040Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether0 %—31.12.2018
ex3815120010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver0 %—31.12.2018
ex3815199010Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)0 %—31.12.2021
ex3815199013Catalyst consisting of:chromium trioxide (CAS RN 1333-82-0),dichromium trioxide (CAS RN 1308-38-9),on a support of aluminium oxide (CAS RN 1344-28-1)0 %—31.12.2021
ex3815199015Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile0 %—31.12.2018
ex3815199020Catalyst,in the form of solid spheres,of a diameter of 4 mm or more but not more than 12 mm, andconsisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,for use in the manufacture of acrylic acid0 %—31.12.2018
ex3815199025Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde0 %—31.12.2018
ex3815199030Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene0 %—31.12.2018
ex3815199065Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide0 %—31.12.2018
ex3815199070Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide0 %—31.12.2018
ex3815199075Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide0 %—31.12.2018
ex3815199080Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil0 %—31.12.2018
ex3815199085Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder0 %—31.12.2018
ex3815199086Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins0 %—31.12.2018
ex38151990ex850690008710Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)0 %—31.12.2017
ex3815909016Initiator based on dimethylaminopropyl urea0 %—31.12.2017
ex3815909018Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO’)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)0 %—31.12.2017
ex38151990ex850690008710Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)0 %—31.12.2018
ex3815909016Initiator based on dimethylaminopropyl urea0 %—31.12.2022
ex3815909018Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)],(CAS RN 1217890-37-3) used to accelerate chemical oxidation or bleaching0 %—31.12.2022
ex3815909020Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:20 % or more but not more than 30 % of titanium and55 % or more but not more than 72 % of chlorine0 %—31.12.2018
ex3815909022Catalyst in powder form consisting by weight of 95 % (± 1 %) titanium dioxide and 5 % (± 1 %) silicon dioxide0 %—31.12.2022
ex3815909030Catalyst, consisting of a suspension in mineral oil of:tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride; andsilicon dioxidecontaining 6,6 % (± 0,6 %) by weight of magnesium, andcontaining 2,3 % (± 0,2 %) by weight of titanium0 %—31.12.2020
ex3815909033Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic hydrocarbon chains, containing 12 – 56 carbon atoms0 %—31.12.2018
ex3815909040Catalyst:containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mmfor use in the manufacture of acrylic acid0 %—31.12.2018
ex3815909040Catalyst:containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mmfor use in the manufacture of acrylic acid0 %—31.12.2018
ex3815909050Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium0 %—31.12.2018
ex3815909070Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols0 %—31.12.2019
ex3815909071Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol0 %—31.12.2017
ex3815909080Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol0 %—31.12.2020
ex3815909081Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate0 %—31.12.2018
ex3815909085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins0 %—31.12.2017
ex3815909085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins0 %—31.12.2022
ex3815909086Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide0 %—31.12.2018
ex3815909088Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:4 % or more but not more than 10 % of titanium and10 % or more but not more than 20 % magnesium0 %—31.12.2018
ex3815909089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile0 %—31.12.2021
ex3817005010Mixture of alkylbenzenes (C14-26) containing by weight:35 % or more but not more than 60 % of eicosylbenzene,25 % or more but not more than 50 % of docosylbenzene,5 % or more but not more than 25 % of tetracosylbenzene0 %—31.12.2018
ex3817008010Mixture of alkylnaphthalenes, containing by weight:88 % or more but not more than 98 % of hexadecylnaphthalene2 % or more but not more than 12 % of dihexadecylnaphthalene0 %—31.12.2018
ex3817008020Mixture of branched alkyl benzenes mainly containing dodecyl benzenes0 %—31.12.2018
ex3817008030Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms0 %—31.12.2021
ex3819000020Fire resistant hydraulic fluid based on phosphate ester0 %—31.12.2018
ex38231930ex382319302030Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 23090 %—31.12.2018
ex38231990ex382319902030Palm acid oils from refining for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 23090 %—31.12.2018
ex3824991510Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets0 %—31.12.2018
ex3824999221Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in Toluene0 %—31.12.2020
ex3824999222Aqueous solution containing by weight38 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),21 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9) and1 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)0 %—31.12.2020
ex3824999223Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol0 %—31.12.2020
ex3824999224Mixture containing two or more of the following acrylates;urethane acrylates,tripropylene glycoldiacrylate,ethoxylated bisphenol A acrylate orpoly(ethyleneglycol) 400 diacrylate0 %—31.12.2021
ex3824999225Preparation containing by weight:25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)0 %—31.12.2021
ex3824999226Preparation containing by weight:60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5)15 % or more but not more than 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and10 % or more but not more than 15 % of 2-sec-butylphenol (CAS RN 89-72-5)0 %—31.12.2022
ex38249992274-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent0 %—31.12.2021
ex3824999228Aqueous solution containing by weight10 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),10 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9) and0,5 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)0 %—31.12.2020
ex3824999229Preparation containing by weight:85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate0 %—31.12.2020
ex3824999230Aqueous solution of caesium formate and potassium formate containing by weight:1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), andwhether or not containing not more than 9 % of additives0 %—31.12.2021
ex3824999232Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)0 %—31.12.2019
ex38249992ex38249993ex38249996334040Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:on a support of mineral wax, whether or not modified chemically, orin the form of a solution in an organic solvent0 %—31.12.2018
ex3824999234Oligomer of tetrafluoroethylene, having one iodoethyl end-group0 %—31.12.2018
ex3824999235Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate0 %—31.12.2017
ex3824999235Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate0 %—31.12.2018
ex3824999236Calcium phosphonate phenate, dissolved in mineral oil0 %—31.12.2021
ex3824999237Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %0 %—31.12.2018
ex3824999239Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol0 %—31.12.2017
ex3824999239Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol0 %—31.12.2018
ex3824999240Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent0 %—31.12.2020
ex3824999242Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene0 %—31.12.2018
ex3824999244Preparation containing by weight:85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate0 %—31.12.2020
ex3824999245Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors0 %—31.12.2018
ex3824999246Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran0 %—31.12.2020
ex3824999247Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2) andtrihexylphosphine oxide (CAS RN 3084-48-8)0 %—31.12.2017
ex3824999248Mixture of:3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) andethyl-6'-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9'-[9H]xanthene]-2'-carboxylate (CAS RN 154306-60-2)0 %—31.12.2017
ex3824999249Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)0 %—31.12.2017
ex3824999250Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses0 %—31.12.2017
ex3824999247Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2) andtrihexylphosphine oxide (CAS RN 3084-48-8)0 %—31.12.2022
ex3824999249Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)0 %—31.12.2022
ex3824999250Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses0 %—31.12.2022
ex3824999251Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid0 %—31.12.2018
ex3824999253Preparations consisting predominantly of ethylene glycol and:either diethylene glycol, dodecandioic acid and ammonia water,or N,N-dimethylformamide,or γ-butyrolactone,or silicon oxide,or ammonium hydrogen azelate,or ammonium hydrogen azelate and silicon oxide,or dodecandioic acid, ammonia water and silicon oxide,for the manufacture of electrolytic capacitors0 %—31.12.2018
ex3824999254Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)0 %—31.12.2021
ex3824999255Additives for paints and coatings, containing:a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and30 % or more but not more than 35 % by weight of isobutyl alcohol0 %—31.12.2018
ex3824999256Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units0 %—31.12.2019
ex3824999257Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units0 %—31.12.2019
ex38249992582-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile0 %—31.12.2018
ex3824999259Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran0 %—31.12.2018
ex3824999260N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %0 %—31.12.2020
ex38249992613',4’,5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4’,5'-trifluorobiphenyl-2-amine0 %—31.12.2020
ex3824999264Preparation containing by weight:89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol0,1 % or more but not more than 1 % of colourants1 % or more but not more than 10 % of fluoropolymers0 %—31.12.2021
ex3824999265Mixture of primary tert-alkylamines0 %—31.12.2019
ex3824999268Preparation containing by weight:20 % (± 1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9),Dissolved in:10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)64 %(± 7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)0 %—31.12.2020
ex3824999269Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) andnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2020
ex3824999269Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) andnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2020
ex3824999270Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine0 %—31.12.2019
ex3824999272N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)0 %—31.12.2018
ex3824999273α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]0 %—31.12.2018
ex3824999274C6-24 and C16-18-Unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN 93571-82-5)0 %—31.12.2018
ex38249992ex390690907587Aqueous solution of polymers and ammonia consisting of:0,1 % or more but not more than 0,5 % by weight of ammonia (CAS RN 1336-21-6) and0,3 % or more but not more than 10 % by weight of polycarboxylate (linear polymers of acrylic acid)0 %—31.12.2018
ex3824999276Preparation containing:74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)0 %—31.12.2018
ex3824999278Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents0 %—31.12.2018
ex3824999280Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)0 %—31.12.2017
ex3824999280Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)0 %—31.12.2022
ex3824999281Preparation consisting of:50 % (± 2 %) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates,in an ink oil (white mineral) solventwith a boiling point of 160 °C or more but not more than 180 °C0 %—31.12.2018
ex3824999282T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene0 %—31.12.2019
ex3824999283Preparation, consisting of two or more of the following glycols:dipropylene glycoltripropylene glycoltetrapropylene glycol orpentapropylene glycol0 %—31.12.2017
ex3824999284Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:either an aluminium-alkyl compound,or an organic complex of tungstenor an organic complex of molybdenum0 %—31.12.2018
ex38249992ex382499938657Liquid crystal mixture for use in the manufacture of displays0 %—31.12.2017
ex38249992882,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated0 %—31.12.2020
ex3824999330Powder Mixture containing by weight:85 % or more of zinc diacrylate (CAS RN 14643-87-9),not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), andnot more than 10 % of zinc stearate (CAS RN 557-05-1)0 %—31.12.2018
ex3824999335Paraffin with a level of chlorination of 70 % or more0 %—31.12.2019
ex3824999342Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea0 %—31.12.2018
ex3824999345Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:not more than 20 % of disodium sulphate, andnot more than 10 % of sodium chloride0 %—31.12.2021
ex3824999350Preparation, consisting of acesulfame potassium (CAS RN 55589-62-3) and potassium hydroxide (CAS RN 1310-58-3)0 %—31.12.2021
ex3824999353Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder0 %—31.12.2018
ex3824999355Mixture containing by weight70 % or more, but not more than 90 % of (S)-indoline-2-carboxylic acid (CAS RN 79815-20-6) and10 % or more, but not more than 30 % of o-chlorocinnamic acid (CAS RN 3752-25-8)0 %—31.12.2021
ex3824999363Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters0 %—31.12.2017
ex3824999363Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters0 %—31.12.2022
ex3824999370Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)0 %—31.12.2019
ex3824999373Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups0 %—31.12.2018
ex3824999375Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols0 %—31.12.2019
ex3824999377Powder mixture containing by weight:85 % or more of zinc diacrylate (CAS RN 14643-87-9)and not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7)0 %—31.12.2018
ex38249993ex382499968067Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material0 %—31.12.2019
ex38249993ex382499968385Preparation containing:C,C’-azodi(formamide) (CAS RN 123-77-3),magnesium oxide (CAS RN 1309-48-4) andzinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)in which the gas formation from C,C’-azodi(formamide) occurs at 135 °C0 %—31.12.2017
ex38249993ex382499968385Preparation containing:C,C′-azodi(formamide) (CAS RN 123-77-3),magnesium oxide (CAS RN 1309-48-4) andzinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C0 %—31.12.2018
ex38249993ex382499968557Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %—31.12.2018
ex3824999388Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder, containing by weight:60 % or more, but not more than 80 % of sitosterols,not more than 15 % of campesterols,not more than 5 % of stigmasterols andnot more than 15 % of betasitostanols0 %—31.12.2017
ex3824999388Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder, containing by weight:60 % or more, but not more than 80 % of sitosterols,not more than 15 % of campesterols,not more than 5 % of stigmasterols andnot more than 15 % of betasitostanols0 %—31.12.2022
ex3824999635Calcined bauxite (refractory grade)0 %—31.12.2018
ex3824999637Structured silica alumina phosphate0 %—31.12.2019
ex3824999645Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with:a particle size of less than 10 μm,a purity by weight of more than 98 %0 %kg31.12.2022
ex3824999646Manganese zinc ferrite granulate, containing by weight:52 % or more but not more than 76 % of iron(III)oxide,13 % or more but not more than 42 % of manganese oxide, and2 % or more but not more than 22 % of zinc oxide0 %—31.12.2020
ex3824999647Mixed metals oxides, in the form of powder, containing by weight:either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,or 30 % or more of lead and 5 % or more of niobium,for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors0 %—31.12.2018
ex3824999648Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %0 %—31.12.2020
ex3824999650Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators0 %—31.12.2017
ex3824999650Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators0 %—31.12.2022
ex3824999655Carrier in powder form, consisting of:ferrite (Iron oxide) (CAS RN 1309-37-1)manganese oxide (CAS RN 1344-43-0)magnesium oxide (CAS RN 1309-48-4)styrene acrylate copolymerto be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers0 %—31.12.2018
ex3824999660Fused magnesia containing by weight 15 % or more of dichromium trioxide0 %—31.12.2021
ex3824999663Catalyst containing by weight of52 % (± 10 %) of cuprous oxide (CAS RN 1317-39-1),38 % (± 10 %) of cupric oxide (CAS RN 1317-38-0) and10 % (± 5 %) of metallic copper (CAS RN 7440-50-8)0 %—31.12.2018
ex3824999665Aluminium sodium silicate, in the form of spheres of a diameter of:either 1,6 mm or more but not more than 3,4 mm,or 4 mm or more but not more than 6 mm0 %—31.12.2018
ex3824999670Powder containing by weight:28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)0 %—31.12.2021
ex3824999673Reaction product, containing by weight:1 % or more but not more than 40 % of molybdenum oxide,10 % or more but not more than 50 % of nickel oxide,30 % or more but not more than 70 % of tungsten oxide0 %—31.12.2019
ex3824999674Mixture with a non-stoichiometric composition:with a crystalline structure,with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm0 %—31.12.2021
ex3824999675Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics:a melting point of between 1600 °C and 1800 °C,a density of 0,6 - 0,8 g/cm3,for use in the manufacture of particle filters in motor vehicles0 %m331.12.2018
ex3824999677Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide0 %—31.12.2019
ex3824999679Paste containing by weight:75 % or more, but not more than 85 % of copper,inorganic oxides,ethyl cellulose, anda solvent0 %—31.12.2017
ex3824999680Mixture consisting of:64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) andnot more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)0 %—31.12.2021
ex3824999687Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:0,1 % or more but not more than 1 % of platinum, and0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)0 %—31.12.2017
ex3824999687Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:0,1 % or more but not more than 1 % of platinum, and0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)0 %—31.12.2022
ex38260010ex382600102029Mixture of fatty acid methyl esters containing by weight at least:65 % or more but not more than 75 % of C12 FAME,21 % or more but not more than 28 % of C14 FAME,4 % or more but not more than 8 % of C16 FAME,for use in the manufacture of detergents and home and personal care products0 %—31.12.2018
ex38260010ex382600103039Mixture of fatty acid methyl esters containing by weight at least:50 % or more but not more than 58 % of C8-FAME35 % or more but not more than 50 % of C10-FAMEfor use in the manufacture of agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components0 %—31.12.2018
ex38260010ex382600104049Mixture of fatty acid methyl esters containing by weight at least:15 % or more but not more than 32 % of C16 FAME65 % or more but not more than 85 % of C18 FAMEfor use in the manufacture of detergents and home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components0 %—31.12.2018
ex39011010ex390190802050High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, witha melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min anda density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 anda vicat softening temperature of min. 94 °C0 %—31.12.2019
ex39011010ex390190802050High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, witha melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min anda density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 anda vicat softening temperature of min. 94 °C0 %—31.12.2019
ex3901101040Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, withnot more than 5 % by weight of comonomer,a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min anda density of 0,922 g/cm3 or more, but not more than 0,928 g/cm30 %m331.12.2018
ex3901109020Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a haze value not more than 6 % and an elongation at break (MD/TD) of 210/3400 %m331.12.2018
ex3901109030Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper0 %—31.12.2021
ex3901209010Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon0 %m331.12.2018
ex3901209020Polyethylene, containing by weight 35 % or more but not more than 45 % of mica0 %—31.12.2018
ex3901908053Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) withan acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), anda melt flow rate of 14g/10 min (MFR 125 °C/2,16 kg, ASTM D1238) or more0 %m331.12.2020
ex3901908055Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:an acrylic acid content of 6 % or more but not more than 50 % by weight, anda melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)0 %—31.12.2020
ex3901908057Octene linear low-density polyethylene (LLDPE) in the form of pellets of a kind used in the co-extrusion processing of films for flexible food packaging with:10 % or more but not more than 20 % by weight of octene,a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10.0/2.16),a melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,a gel area per 24,6 cm3 of not more than 20 mm2; andan anti-oxidant level of not more than 240 ppm0 %m331.12.2020
ex3901908063Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:more than 10 % but not more than 20 % by weight of copolymer,a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, anda density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3for use in the co-extrusion processing of films for flexible food packaging0 %m331.12.2020
ex3901908065Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, withmore than 5 %, but not more than 8 % by weight of comonomer,a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min anda density of 0,922 g/cm3 or more, but not more than 0,928 g/cm30 %m331.12.2018
ex3901908067Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more0 %—31.12.2020
ex3901908070Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3 g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)0 %—31.12.2020
ex3901908073Mixture containing by weight80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)0 %—31.12.2021
ex3901908080Block copolymer of ethylene with octene in the form of pellets:with a specific gravity of 0,862 or more, but not more than 0,865,able to stretch to at least 200 % its original length,with a hysteresis of 50 % (± 10 %),with permanent deformation of not more than 20 %,for use in the manufacture of napkin liners for babies0 %—31.12.2020
ex3901908091Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid4 %—31.12.2018
ex3901908092Chlorosulphonated polyethylene0 %—31.12.2018
ex3901908093Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets0 %—31.12.2018
ex3901908094Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene0 %—31.12.2018
ex3901908097Chlorinated polyethylene, in the form of powder0 %—31.12.2018
ex3902100010Polypropylene containing no plasticiser and not more than:7 mg/kg of aluminium,2 mg/kg of iron,1 mg/kg of magnesium,8 mg/kg of chloride0 %—31.12.2018
ex3902100020Polypropylene, containing no plasticiser,of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),of a heat of fusion of 15 J/g or more but not more than 70 J/g,of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)0 %—31.12.2018
ex3902100030Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses0 %—31.12.2018
ex3902100040Polypropylene, containing no plasticiser:of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method);of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method);of a Melt Flow Rate (MFR) at 230 °C/2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method);with 40 % or more but not more than 80 % by weight of polypropylene,with 10 % or more but not more than 30 % by weight of glass fibre,with 10 % or more but not more than 30 % by weight of mica0 %—31.12.2019
ex3902100050High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties:a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3(as determined by test method ASTM D1505),a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638)a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648)0 %m331.12.2020
ex3902200010Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 8000 %—31.12.2018
ex3902200020Hydrogenated polyisobutene, in liquid form0 %—31.12.2018
ex3902300091A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2018
ex3902300095A-B-A block copolymer, consisting of:a copolymer of propylene and ethylene and21 % (± 3 %) by weight of polystyrene0 %—31.12.2021
ex3902300097Liquid ethylene-propylene-copolymer with:a flashpoint of 250 °C or more,a viscosity index of 150 or more,of a number average molecular weight (Mn) of 650 or more0 %—31.12.2021
ex3902909052Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin0 %—31.12.2018
ex3902909055Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene0 %—31.12.2018
ex3902909060Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:liquid at room temperatureobtained by cationic polymerisation of C-5 alkenes monomerswith a number average molecular weight (Mn) of 370 (± 50)with a weight average molecular weight (Mw) of 500 (± 100)0 %—31.12.2019
ex3902909092Polymers of 4-methylpent-1-ene0 %—31.12.2018
ex3902909094Chlorinated polyolefins, whether or not in a solution or dispersion0 %—31.12.2018
ex3902909098Synthetic poly-alpha-olefin with a viscosity at 100o Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene0 %—31.12.2021
ex3903110010White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (± 1,5 kg/m3), containing 50 % recycled material0 %m331.12.2018
ex3903190040Crystalline polystyrene with:a melting point of 268 °C or more but not more than 272 °Ca setting point of 232 °C or more but not more than 247 °C,whether or not containing additives and filling material0 %—31.12.2021
ex3903909015Copolymer in the form of granules containing by weight:78 ± 4 % styrene,9 ± 2 % n-butyl acrylate,11 ± 3 % n-butyl methacrylate1,5 ± 0,7 % methacrylic acid and0,01 % or more but not more than 2,5 % of polyolefinic wax0 %—31.12.2017
ex3903909015Copolymer in the form of granules containing by weight:78 (± 4 %) of styrene,9 (± 2 %) of n-butyl acrylate,11 (± 3 %) of n-butyl methacrylate,1,5 (± 0,7 %) of methacrylic acid and0,01 % or more but not more than 2,5 % of polyolefinic wax0 %—31.12.2018
ex3903909020Copolymer in the form of granules containing by weight:83 ± 3 % styrene,7 ± 2 % n-butyl acrylate,9 ± 2 % n-butyl methacrylate and0,01 % or more but not more than 1 % of polyolefinic wax0 %—31.12.2021
ex3903909025Copolymer in the form of granules containing by weight:82 ± 6 % styrene,13,5 ± 3 % n-butyl acrylate,1 ± 0,5 % methacrylic acid and0,01 % or more but not more than 8,5 % of polyolefinic wax0 %—31.12.2021
ex39039090ex391190993543Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C0 %—31.12.2018
ex39039090ex391190994050Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 60000 %—31.12.2018
ex3903909045Preparation, in form of powder, containing by weight:86 % or more but not more than 90 % of styrene-acrylic-copolymer and9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)0 %m331.12.2019
ex3903909046Copolymer in the form of granules containing by weight:74 % (± 4 %) styrene,24 % (± 2 %) n-butylacrylate and0,01 % or more but not more than 2 % methacrylic acid0 %m331.12.2020
ex3903909055Preparation, in form of an aqueous suspension, containing by weight:25 % or more but not more than 26 % of styrene-acrylic-copolymer and5 % or more but not more than 6 % of glycol0 %—31.12.2019
ex39039090ex391190996060Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form0 %—31.12.2021
ex3903909065Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)0 %—31.12.2020
ex3903909070Copolymer in the form of granules containing by weight:75 % (± 7 %) styrene and25 % (± 7 %) methylmethacrylate0 %m331.12.2020
ex3903909080Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:minimum 65 % styrene,maximum 25 % divinylbenzenefor use in the manufacture of ion exchange resins0 %—31.12.2018
ex3903909086Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene35 % or more but not more than 45 % of poly(phenylene ether)not more than 10 % of other additivesand with one or more of the following special colour effects:metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigmentfluorescent, as characterized by emitting light during absorption of ultraviolet radiationbright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale0 %—31.12.2018
ex3904100020Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with:a degree of polymerisation of 1000 (± 300) monomer units,a coefficient of heat transmission (K-value) of 60 or more, but not more than 70,a volatile material content of less than 2,00 % by weight,a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight,for use in the manufacture of battery separators0 %—31.12.2019
ex39043000ex390440003091Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:87 % or more but not more than 92 % of vinyl chloride,2 % or more but not more than 9 % of vinyl acetate and1 % or more but not more than 8 % of vinyl alcohol,in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink0 %—31.12.2018
ex3904400093Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous emulsion0 %—31.12.2018
ex3904509092Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments0 %—31.12.2019
ex3904610020Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions0 %—31.12.2018
ex3904610030Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm0 %—31.12.2018
ex3904698081Poly(vinylidene fluoride) (CAS RN 24937-79-9)0 %—31.12.2020
ex3904698085Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers0 %—31.12.2017
ex3904698085Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers0 %—31.12.2022
ex3904698093Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2018
ex3904698094Copolymer of ethylene and tetrafluoroethylene0 %—31.12.2018
ex3904698096Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 390 %—31.12.2018
ex3904698097Copolymer of chlorotrifluoroethylene and vinylidene difluoride0 %—31.12.2018
ex3905300010Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors0 %—31.12.2017
ex3905910030Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing not more than 32 % by weight of ethylene0 %—31.12.2017
ex3905300010Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors0 %—31.12.2022
ex3905910040Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene0 %—31.12.2022
ex3905999092Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water0 %—31.12.2018
ex3905999095Hexadecylated or eicosylated polyvinylpyrrolidone0 %—31.12.2018
ex3905999096Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol0 %—31.12.2018
ex3905999097Povidone (INN)-iodine (CAS RN 25655-41-8)0 %—31.12.2018
ex3905999098Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups0 %—31.12.2018
39069060Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide0 %—31.12.2018
ex3906909010Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 30040 %—31.12.2018
ex3906909015Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer0 %—31.12.2018
ex3906909027Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate0 %—31.12.2017
ex3906909027Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate0 %—31.12.2022
ex3906909030Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 60000 %—31.12.2018
ex3906909033Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm0 %—31.12.2020
ex3906909035White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water0 %—31.12.2018
ex3906909037Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm0 %—31.12.2020
ex3906909040Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:a viscosity of not more than 50000 Pa·s at 120 °C as determined by the test method ASTM D 3835a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,a residual monomer content of less than 1 %0 %—31.12.2020
ex3906909041Poly(alkyl acrylate) with an ester alkyl chain of C10 to C300 %—31.12.2019
ex3906909050Polymers of esters of acrylic acid with one or more of the following monomers in the chain:chloromethyl vinyl ether,chloroethyl vinyl ether,chloromethylstyrene,vinyl chloroacetate,methacrylic acid,butenedioic acid monobutyl ester,containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2018
ex3906909053Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:75 % or more but not more than 85 % of polyacrylamide and15 % or more but not more than 25 % of polyethylene glycol0 %—31.12.2021
ex3906909063Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5)0 %—31.12.2021
ex3906909065Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC)0 %—31.12.2018
ex3906909073Preparation containing by weight:33 % or more but not more than 37 % of butyl methacrylate — methacrylic acid copolymer,24 % or more but not more than 28 % of propylene glycol, and37 % or more but not more than 41 % of water0 %—31.12.2019
ex3906909080Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates)0 %—31.12.2018
ex3907100010Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene0 %—31.12.2020
ex3907100020Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine0 %—31.12.2020
ex3907201110Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more0 %—31.12.2018
ex3907201120Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 400000 %—31.12.2018
ex3907201160Preparation containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) andα-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)0 %—31.12.2021
ex3907202020Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1)0 %—31.12.2017
ex3907202020Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1)0 %—31.12.2022
ex3907202025Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight:48 % or more but not more than 52 % of propylene oxide and48 % or more but not more than 52 % of butylene oxide0 %—31.12.2021
ex3907202030Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone0 %—31.12.2018
ex3907202040Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100)0 %—31.12.2018
ex39072020ex390720995075Poly(p-phenylene oxide) in the form of powderwith a glasstransitiontemperature of 210 °C,with a weight average molecular weight (Mw) of 35000 or more but not more than 80000,with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram0 %—31.12.2019
ex3907202060Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium0 %—31.12.2022
ex3907209915Poly(oxypropylene) having alkoxysilyl end-groups0 %—31.12.2018
ex3907209930Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0 %—31.12.2018
ex3907209935Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate0 %—31.12.2018
ex3907209945Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups0 %—31.12.2018
ex3907209950Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient0 %—31.12.2018
ex3907209955Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 50000 %—31.12.2018
ex3907209960Polytetramethylene oxide di-p-aminobenzoate0 %—31.12.2021
ex3907209965L-Lysine N-hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene glycol monomethylether carbamate) (CAS RN 266318-38-1) of a number average molecular weight (Mn) of 38000 or more but not more than 400000 %—31.12.2018
ex3907209970α-[3-(3-Maleimido-1-oxopropyl)amino]propyl-ω-methoxy, polyoxyethylene (CAS RN 883993-35-9)0 %—31.12.2019
ex3907209980Isoamyl alcohol polyoxyethylene ether (CAS RN 62601-60-9)0 %kg31.12.2022
ex3907300015Epoxide resin, halogen-free,containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, andcontaining solventsfor use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits0 %—31.12.2020
ex3907300025Epoxide resincontaining by weight 21 % or more of brome,not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, andcontaining solvents0 %—31.12.2020
ex39073000ex392690974070Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 85480 %—31.12.2018
ex3907300050Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:a zinc borate hydrate content of not more than 40 % by weight,a diantimony trioxide content of not more than 5 % by weight0 %—31.12.2018
ex3907300060Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)0 %—31.12.2017
ex3907300060Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)0 %—31.12.2022
ex3907400035α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)0 %—31.12.2018
ex3907400070Polycarbonate of phosgene and bisphenol A:containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,with p-cumylphenol endcaps, andwith a weight average molecular weight (Mw) of 29900 or more but not more than 319000 %—31.12.2019
ex3907400080Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps0 %—31.12.2019
ex3907690010Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol0 %—31.12.2018
ex3907690040Poly(ethylene terephthalate) pellets or granules:with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, andcontaining not more than 10 % by weight of other modifiers or additives0 %m331.12.2021
ex39076900ex392690925040Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of:not more than 75 μm of polyethylene,not more than 50 μm of polyamide,not more than 15 μm of polyethylene terephthalate andnot more than 9 μm of aluminiumwith a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa0 %—31.12.2017
ex3907690060Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups0 %—31.12.2018
39077000Poly(lactic acid)0 %—31.12.2018
ex3907919010Diallyl phthalate prepolymer, in powder form0 %—31.12.2019
ex3907990520Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers0 %—31.12.2018
ex3907998010Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder0 %—31.12.2018
ex3907998025Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol0 %—31.12.2017
ex3907998025Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol0 %—31.12.2022
ex39079980ex391390003020Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)0 %—31.12.2020
ex3907998040Polycarbonate of phosgene, bisphenol A, resorcinol, isophthaloyl chloride, terephthaloyl chloride andpolysiloxane, with p-cumylphenolendcaps, and a weight average molecular weight (Mw) of 24100 or more but not more than 259000 %—31.12.2019
ex3907998060Copolymer of terephthalic acid and isophthalic acid with bisphenol A0 %—31.12.2017
ex3907998070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol0 %—31.12.2019
ex3907998070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol3.5 %—31.12.2019
ex3907998080Copolymer, consisting of 72 % by weight or more of terephthalic acid and/or derivatives thereof and cyclohexanedimethanol, completed with linear and/or cyclic dioles0 %—31.12.2020
ex3908900010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2018
ex3908900030Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine0 %—31.12.2018
ex39089000551,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine (CAS RN 169284-22-4)0 %—31.12.2020
ex3908900060Copolymer consisting of:hexanedioic acid12-aminododecanoic acidhexahydro-2H-azepin-2-one, and1,6-hexanediamine0 %—31.12.2017
ex3908900070Copolymer containing:1,3-benzenedimethanamine (CAS RN 1477-55-0) andadipic acid (CAS RN 124-04-9)whether or not containing isophthalic acid (CAS RN 121-91-5)0 %—31.12.2019
ex3909400010Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm0 %—31.12.2018
ex3909400020Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices0 %—31.12.2020
ex3909400030Mixture of:alkylphenol — formaldehyde resin, whether or not brominated, andzinc oxide0 %—31.12.2017
ex3909400040Polymer in powder form with a content of:phenolic resin polymer (CAS RN 9003-35-4) with 80 % by weight or more but not more than 90 %phenol (CAS RN 108-95-2) with not more than 5 % andhexamethylenetetramine (CAS RN 100-97-0) with 5 % by weight or more but not more than 15 %0 %—31.12.2018
ex3909509010UV curable water soluble liquid photopolymer consisting of a mixture by weight of60 % or more of two-functional acrylated polyurethane oligomers and30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates0 %—31.12.2019
ex3909509020Preparation containing by weight:14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,3 % or more but not more than 5 % of enzymatically modified starch, and77 % or more but not more than 83 % of water0 %—31.12.2019
ex3909509030Preparation containing by weight:16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,19 % or more but not more than 23 % of diethylene glycol butyl ether, and60 % or more but not more than 64 % of water0 %—31.12.2019
ex3909509040Preparation containing by weight:34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,37 % or more but not more than 39 % of propylene glycol, and26 % or more but not more than 28 % of water0 %—31.12.2019
ex3910000015Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated0 %—31.12.2020
ex3910000020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]0 %—31.12.2018
ex3910000025Preparations containing by weight:10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)0 %—31.12.2021
ex3910000035Preparations containing by weight:30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)0 %—31.12.2021
ex3910000040Silicones of a kind used in the manufacture of long term surgical implants0 %—31.12.2021
ex3910000045Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8)0 %—31.12.2021
ex3910000050Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum0 %—31.12.2017
ex3910000050Silicone based pressure sensitive adhesive in solvent containing copoly (dimethylsiloxane/diphenylsiloxane) gum0 %—31.12.2022
ex3910000055Preparation containing by weight:55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)0 %—31.12.2021
ex3910000060Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups0 %—31.12.2019
ex3910000070Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices0 %—31.12.2018
ex3910000080Monomethacryloxypropylterminated poly(dimethylsiloxane)0 %—31.12.2019
ex3911100081Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:an iodine value of more than 120 anda Gardner Colour of more than 10 for the pure product ora Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)0 %—31.12.2018
ex3911901920Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing:83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene),a synthetic rubber,whether or not containing by weight 7 % or more of tricyclopentadiene.and each separate component containing:either an aluminium-alkyl compound,or an organic complex of tungstenor an organic complex of molybdenum0 %—31.12.2018
ex3911901930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %—31.12.2017
ex3911901930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %—31.12.2022
ex3911901940m- Xylene formaldehyde resin0 %—31.12.2021
ex3911901950Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form0 %—31.12.2019
ex3911901960Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6)0 %—31.12.2019
ex3911901970Preparation, containing:Cyanic acid, C,C’-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight0 %—31.12.2019
ex3911909925Copolymer of vinyltoluene and α-methylstyrene0 %—31.12.2018
ex39119099301,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated0 %—31.12.2020
ex3911909935Alternated copolymer of ethylene and maleic anhydride (EMA)0 %—31.12.2020
ex3911909940Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight0 %—31.12.2018
ex3911909945Copolymer of maleic acid and methyl vinyl ether0 %—31.12.2018
ex3911909953Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)0 %—31.12.2017
ex3911909957Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)0 %—31.12.2017
ex3911909953Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)0 %—31.12.2022
ex3911909957Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)0 %—31.12.2022
ex3911909965Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether0 %—31.12.2018
ex3911909986Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)0 %—31.12.2021
ex3912110030Cellulose triacetate (CAS RN 9012-09-3)0 %—31.12.2021
ex3912110040Cellulose diacetate powder0 %—31.12.2020
ex3912398510Ethylcellulose, not plasticized0 %—31.12.2018
ex3912398520Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose0 %—31.12.2018
ex3912398530Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0 %—31.12.2018
ex3912398540Hypromellose (INN) (CAS RN 9004-65-3)0 %—31.12.2021
ex3912398550Polyquaternium 10 (CAS RN 68610-92-4)0 %—31.12.2020
ex3912901010Cellulose acetate propionate, non-plasticised, in the form of powder:containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) andof a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method),for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings0 %—31.12.2018
ex3912901020Hydroxypropyl methylcellulose phthalate0 %—31.12.2018
ex3913900030Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 3500000 %—31.12.2018
ex3913900085Sterile sodium hyaluronate (CAS RN 9067-32-7)0 %—31.12.2018
ex3913900092Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100000 to 3000000 %—31.12.2018
ex3913900095Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)0 %—31.12.2018
ex3916200091Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:titanium dioxidepoly(methyl methacrylate)calcium carbonatebinding agents0 %—31.12.2019
ex3916901010Rods with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene if present10 % or more but not more than 25 % of inorganic fillers0 %—31.12.2018
ex3917320091Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm0 %—31.12.2018
ex3917400091Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses0 %—31.12.2019
ex39191019ex39191080ex39199080102531Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2018
ex3919101920Rolls of two-sided adhesive tape:coated with non-vulcanised natural or synthetic rubberwith a width of 20 mm or more but not more than 40 mmcontaining silicone, aluminium hydroxide, acryl and urethane0 %—31.12.2018
ex39191080ex391990802720Polyester film:coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, andon the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner0 %—31.12.2019
ex3919108035Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2018
ex3919108037Polytetrafluoroethylene film:with a thickness of 100 μm or more,an elongation at break of not more than 100 %,coated on one side with a pressure sensitive silicon adhesive0 %—31.12.2020
ex39191080ex391990804043Black poly(vinyl chloride) film:with a gloss of more than 30 degrees according to ASTM D2457,whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner0 %—31.12.2017
ex39191080ex391990804043Black poly(vinyl chloride) film:with a gloss of more than 30 degrees according to ASTM D2457,whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner0 %—31.12.2022
ex39191080ex391990804326Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner0 %—31.12.2020
ex39191080ex391990804545Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %—31.12.2017
ex39191080ex391990804732Polyester, polyurethane or polycarbonate foil:with pressure sensitive silicone polymer adhesive,of a total thickness of not more than 0,7 mm,of a total width of 1 cm or more, but not more than 1 m,whether or not in rollsof a kind used for the protection of the surface of products of headings 8521 and 85280 %—31.12.2017
ex39191080ex391990804545Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %—31.12.2022
ex39191080ex39199080ex39201089504125Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs0 %—31.12.2018
ex39191080ex39199080ex39201028ex3920108953349350Polyethylene foil:with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,of a total thickness of 0,025 mm or more, but not more than 0,7 mm, andof a total width of 6 cm or more, but not more than 1 m,whether or not in rolls,of a kind used for the protection of the surface of products of headings 8521 and 85280 %—31.12.2017
ex39191080ex391990805553Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %—31.12.2017
ex39191080ex391990805553Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90° of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %—31.12.2022
ex39191080ex39199080ex39206100573030Reflecting sheet:of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped patterncovered on one or both sides with one or more layers of plastic or metallisation, andwhether or not covered on one side with a self-adhesive layer and a release sheet0 %—31.12.2018
ex3919108060Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet0 %—31.12.2018
ex3919108063Reflecting film consisting ofa layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,a layer of an acrylic resin having embedded glass beads,a layer of an acrylic resin hardened by a melamine cross-linking agent,a metal layer,an acrylic adhesive, anda release film0 %—31.12.2020
ex39191080ex391990807075Rolls of polyethylene foil:self-adhesive on one side,of a total thickness of 0,025 mm or more, but not more than 0,09 mm,of a total width of 60 mm or more, but not more than 1110 mm,of a kind used for the protection of the surface of products of headings 8521 or 85280 %—31.12.2021
ex39191080ex391990807350Self-adhesive reflecting sheet whether or not in segmented pieces,whether or not containing a watermark,with or without an application tape coated on one side with an adhesive;the reflective sheet consists of:a layer of acrylic or vinyl polymer,a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,a layer of metallisation,an adhesive layer, anda release sheetwhether or not containing an additional layer of polyester0 %—31.12.2018
ex39191080ex391990807580Self-adhesive reflecting film, consisting of several layers including:a copolymer of acrylic resin,polyurethane,a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,glass microspheres, andan adhesive layer, with a release liner on one or both sides0 %—31.12.2021
ex39191080ex391990808528Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film:coated on one side with an acrylic UV-sensitive adhesive and a linerof a total thickness of 65 μm or more without release liner0 %—31.12.2019
ex3919908019Transparent poly(ethylene terephthalate) self-adhesive film:free from impurities or faults,coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,with a total thickness without the liner of 54 μm or more but not more than 64 μm, anda width of more than 1295 mm but not more than 1305 mm0 %—31.12.2018
ex3919908023Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner0 %—31.12.2018
ex3919908024Reflecting laminated sheet:consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,covered on both sides with one or more layers of plastic material andcovered on one side with an adhesive layer and a release sheet0 %—31.12.2019
ex3919908025Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner0 %—31.12.2017
ex3919908027Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V0 %—31.12.2018
ex3919908029Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner)0 %—31.12.2019
ex3919908033Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm0 %—31.12.2018
ex3919908035Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:a layer of polyurethane containing glass micro beads,a layer of poly(ethylene vinyl acetate),an adhesive layer, anda release sheet0 %—31.12.2018
ex39199080ex392049103695Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride)whether or not with a pressure or heat sensitive adhesive layerwhether or not with a release filmwith a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken togetherwith a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 gm2) with pressure sensitive layer0 %m231.12.2017
ex3919908038Self-adhesive film composed of:a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,not more than 6 % by weight of other additives,a pressure sensitive adhesive; andcovered on one side with a release liner,whether or not with a separate self-adhesive over laminate protective film,of a total thickness of not more than 400 μm0 %—31.12.2017
ex3919908039Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm0 %—31.12.2018
ex3919908040Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film:containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or morehaving on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2coated on the other side with a pressure sensitive adhesive and a release liner0 %—31.12.2017
ex3919908042Self-adhesive film composed of:a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,a second layer containing a maleic anhydride copolymer,a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,a pressure sensitive adhesive; andcovered on one side with a release linerwhether or not with a separate self-adhesive over laminate protective filmof a total thickness of not more than 400 μm0 %—31.12.2017
ex39199080ex392190604495Printed laminated sheetwith a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),on one side covered with a layer of poly(vinyl fluoride),whether or not with a pressure sensitive adhesive layer and a release film on the other side,with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), andwith a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer0 %m231.12.2017
ex39199080ex900120004740Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side0 %—31.12.2017
ex3919908049Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet0 %—31.12.2018
ex3919908051Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet0 %—31.12.2018
ex3919908052White polyolefin tape consisting of:an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm,a polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, anda non-silicone release layer with a thickness below 1 μm0 %—31.12.2020
ex3919908054Poly(vinyl chloride) film, on one side covered witha polymer layeran adhesive layera release liner, on one side embossed, containing oblate spheres;whether or not on the other side covered with an adhesive layer and a metallised polymer layer0 %—31.12.2019
ex3919908060Reflecting film containing:a poly(vinyl chloride) layer,a polyurethane layer,a glass microspheres layer,a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view,a metallised aluminium layer, andan adhesive, covered on one side with a release liner0 %—31.12.2020
ex3919908063Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,coated with an acrylic pressure sensitive adhesive andwith a release linerof an overall thickness of not more than 110 μm0 %—31.12.2020
ex3919908065Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner0 %—31.12.2020
ex3919908067Self-adhesive plastic film consisting of:a poly(olefin) layer with a thickness of more than 95 but not more than 110 micronsan adhesive layer with a thickness of more than 5 but not more than 15 micronsa layer based on epoxy resin, with a thickness of more than 4 but not more than 100 micronsa liner consisting of poly(ethylene terephthalate) with a thickness of more than 35 but not more than 40 microns0 %m231.12.2018
ex3919908070Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad0 %—31.12.2020
ex3919908081Film of a minimum thickness of 0,36 mm, consisting of the following:an embossed polyester layer,a caprolactone-cyclohexylene isocyanate copolymer layer,a pressure sensitive adhesiveand covered on one side with a release liner0 %—31.12.2018
ex3919908082Reflecting film consisting of:a polyurethane layer,a glass microspheres layer,a metallised aluminium layer, andan adhesive, covered on one or both sides with a release liner,whether or not a poly(vinyl chloride) layer,a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use0 %—31.12.2020
ex39199080ex900190008333Reflector or diffuser sheets, in rolls,for protection against ultraviolet or infra-red heat radiation, to be affixed to windows orfor equal transmission and distribution of light, intended for LCD modules0 %—31.12.2022
ex39201025ex392010891020Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber0 %—31.12.2018
ex3920102520Film of polyethylene, of a kind used for typewriter ribbon0 %—31.12.2018
ex3920102830Printed embossed filmof polymers of ethylenehaving a gravity of 0,94 g/cm3 or moreof a thickness of 0,019 mm ± 0,003 mmwith permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more0 %—31.12.2019
ex3920102891Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:is repetitive and equally spaced along the length of the filmis equally and visibly aligned when viewed from the back or front of the film0 %—31.12.2018
ex3920104030Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of:a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,covered on either side with two or more layers of polymeric material,and having an overall total thickness of not more than 110 μm0 %—31.12.2017
ex3920104040Tubular layered film predominately of polyethylene:consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,having a total thickness of 55 μm or more,having a diameter of 500 mm or more but not more than 600 mm0 %—31.12.2020
ex3920108930Ethylene vinyl acetate (EVA) film with:a raised relief surface with embossed undulations, anda thickness of more than 0,125 mm0 %—31.12.2021
ex3920108940Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm0 %—31.12.2021
ex3920202130Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm0 %—31.12.2018
ex3920202140Sheets of biaxially — oriented polypropylene film:with the thickness of not more than 0,1 mm,printed on both sides with specialised coatings to allow banknote security printing0 %—31.12.2021
ex39202029ex392020805593Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of:a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,covered on either side with two or more layers of polymeric material,and having an overall total thickness of not more than 110 μm0 %—31.12.2017
ex3920202960Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa anda tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPaas determined by test method ASTM D882/ISO 527-30 %—31.12.2018
ex3920202970Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:a thickness of 55 μm or more but not more than 97 μm,a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, anda tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa0 %—31.12.2019
ex3920202994Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 70 μm0 %—31.12.2017
ex3920202994Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 70 μm0 %—31.12.2022
ex3920208092Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester0 %—31.12.2018
ex3920208095Polypropylene sheet, put up in rolls, with:flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)density range of 0,988 g/cm3 or more but not more than 1035 g/cm3 (as determined by ASTM D792)moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)for use in the manufacture of insulators used in the electronics and electrical industries0 %m331.12.2017
ex3920431092Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)0 %—31.12.2018
ex39204310ex392049109493Film of a specular gloss of 70 or more, measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 94030 %—31.12.2018
ex3920431095Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet0 %—31.12.2018
ex3920491030Film of a (polyvinyl)chloride-copolymercontaining by weight 45 % or more of fillerson a support0 %—31.12.2018
ex3920510020Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm0 %—31.12.2018
ex3920510030Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm0 %—31.12.2018
ex3920510040Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)0 %—31.12.2018
ex3920621902Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black0 %—31.12.2018
ex3920621908Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:only dyed in the mass, ordyed in the mass and metallised on one side0 %—31.12.2018
ex3920621912Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %—31.12.2018
ex3920621918Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %—31.12.2018
ex3920621920Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers0 %—31.12.2018
ex3920621938Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm0 %—31.12.2018
ex3920621948Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)0 %—31.12.2020
ex3920621952Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method)0 %—31.12.2018
ex3920621960Poly (ethylene terephtalate) film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm0 %—31.12.2017
ex3920621960Poly(ethylene terephthalate) film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm0 %—31.12.2022
ex39206219ex392069007340Iridescent film of polyester and poly(methyl methacrylate)0 %—31.12.2018
ex3920621976Transparent poly(ethylene terephthalate) film:coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,with a light transmission of more than 93 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm0 %—31.12.2018
ex3920690020Film of poly(ethylene naphthalene-2,6-dicarboxylate)0 %—31.12.2018
ex3920690050Monolayer, biaxially oriented film:composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,having a thickness of 20 μm or more but not more than 120 μmbiodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2019
ex3920690060Monolayer, transverse oriented, shrink film:composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),having a thickness of 45 μm or more but not more than 50 μm,biodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2019
ex3920791010Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm0 %p/st31.12.2019
ex3920910051Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticiser0 %—31.12.2019
ex3920910052Poly(vinyl butyral) film:containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,with a thickness of 0,73 mm or more but not more than 1,50 mm0 %—31.12.2019
ex3920910091Poly(vinyl butyral) film having a graduated coloured band3 %—31.12.2018
ex3920910093Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm0 %—31.12.2019
ex3920910095Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser0 %—31.12.2018
ex3920920030Polyamide film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm0 %—31.12.2018
ex3920992835Polyether imide sheets, in rolls, witha thickness of 5 μm or more, but not more than 14 μm,a width of 478 mm or more, but not more than 532 mm,a tensile strength at break of 78 MPa or more (as determined by JIS C-2318 for a film thickness of 50 μm),an elongation at break of 50 % or more (as determined by JIS C-2318 for a film thickness of 50 μm),a glass transition point (Tg) of 226 °C,a continuous service temperature of 180 °C (as determined by UL-746 B for a film thickness of 50 μm),a flammability of VTM-0 (as determined by UL 94 for a film thickness of 25 μm)0 %—31.12.2018
ex3920992840Polymer film containing the following monomers:poly (tetramethylene ether glycol),bis (4-isocyanotocyclohexyl) methane,1,4-butanediol or 1,3-butanediol,with a thickness of 0,25 mm or more but not more than 5,0 mm,embossed with a regular pattern on one surface,and covered with a release sheet0 %—31.12.2018
ex3920992845Transparent polyurethane film metallised on one side:with a gloss of more than 90 degrees according to ASTM D2457covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymercovered on the other side with a protective poly(ethylene terephthalate) filmwith a total thickness of more than 204 μm but not more than 244 μm0 %—31.12.2018
ex3920992850Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film0 %—31.12.2021
ex3920992855Thermoplastic polyurethane film extruded, with:not self-adhesive,an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),a total thickness of 0,38 mm or more, but not more than 7,6 mm,a width of 99 cm or more, but not more than 305 cm,of a kind used in the production of laminated safety glass0 %—31.12.2017
ex3920992855Thermoplastic polyurethane film extruded, with:not self-adhesive,an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),a total thickness of 0,38 mm or more, but not more than 7,6 mm,a width of 99 cm or more, but not more than 305 cm,of a kind used in the production of laminated safety glass0 %—31.12.2018
ex3920992865Matt, thermoplastic polyurethane foil in rolls with:a width of 1640 mm (± 10 mm),a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),a thickness of more than 365 μm but not more than 760 μm,a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),an elongation to break of 470 % (as determined by the method: EN ISO 527)0 %m231.12.2019
ex3920992870Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:microspheres with a coating of metal, whether or not alloyed with gold,an adhesive layer,with a protective layer of silicone or poly(ethylene terephthalate) on one side,with a protective layer of poly(ethylene terephthalate) on the other side, andwith a width of 5 cm or more but not more than 100 cmwith a length of not more than 2000 m0 %—31.12.2021
ex3920992875Thermoplastic polyurethane foil in rolls with:a width of more than 900 mm but not more than 1016 mm,a matt finish,a thickness of 0,43 mm (± 0,03 mm),an elongation to break of 420 % or more but not more than 520 %,a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),wrinkle inside (waves) of 6,35 mm,a flatness of 0,025 mm0 %m231.12.2019
ex3920995925Poly(1-chlorotrifluoroethylene) film0 %—31.12.2018
ex3920995955Ion-exchange membranes of fluorinated plastic material0 %—31.12.2018
ex3920995965Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %0 %—31.12.2018
ex3920995970Tetrafluoroethylene film, put up in rolls, with:a thickness of 50 μm,a melting point of 260 °C, anda specific gravity of 1,75 (ASTM D792)for use in the manufacture of semiconductor devices0 %—31.12.2021
ex3920999020Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays0 %—31.12.2018
ex3921131010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,100920 %—31.12.2018
ex3921131010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,100920 %—31.12.2018
ex3921131020Rolls of open-cell polyurethane foam:with a thickness of 2,29 mm (± 0,25 mm),surface-treated with a foraminous adhesion promoter, andlaminated to a polyester film and a layer of textile material0 %—31.12.2017
ex3921131020Rolls of open-cell polyurethane foam:with a thickness of 2,29 mm (± 0,25 mm),surface-treated with a foraminous adhesion promoter, andlaminated to a polyester film and a layer of textile material0 %—31.12.2022
ex3921190030Blocks with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene if present10 % or more but not more than 25 % of inorganic fillers0 %—31.12.2018
ex3921190040Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:a width of 98 mm or more but not more than170 mm,a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators0 %—31.12.2020
ex3921190050Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:a total thickness of more than 0,05 mm but not more than 0,20 mm,a water entry pressure between 5 and 200 kPa according to ISO 811, andan air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-50 %—31.12.2021
ex3921190060Multi-porous multilayer separator foil with:one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,a width of 65 mm or more but not more than 170 mm,a total thickness of 0,01 mm or more but not more than 0,03 mm,a porosity of 0,25 or more but not more than 0,650 %m231.12.2022
ex3921190070Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having:a width of 1600 mm or more but not more than 1730 mm, anda membrane thickness of 15 μm or more, but not more than 50 μmfor use in the manufacture of a bi-component ePTFE membrane0 %—31.12.2022
ex3921190080Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film withzero transversal production direction (TD) shrinkage,a total thickness of 10 μm or more but not more than 50 μm,a width of 15 mm or more but not more than 900 mm,a length of more than 200 m but not more than 3000 m, andan average pore size between 0,02 μm and 0,1 μm0 %—31.12.2022
ex3921190093Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment0 %—31.12.2018
ex3921190095Film of polyethersulfone, of a thickness of not more than 200 μm0 %—31.12.2018
ex3921190096Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm0 %—31.12.2018
ex3921901010Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres0 %—31.12.2018
ex3921901020Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin0 %—31.12.2018
ex3921901030Multilayer film consisting of:a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm0 %m231.12.2018
ex3921905520Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or546,1 mm (± 2 mm) × 622,3 mm (± 2 mmfor use in the manufacture of printed circuit boards0 %—31.12.2018
ex39219055ex70194000ex70194000252129Prepreg sheets or rolls containing polyimide resin0 %—31.12.2019
ex3921905540Three layered fabric sheet, in rolls,comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,coated on both sides with polyamide,of a total thickness not more than 135 μm,of a total weight not more than 80 g/m20 %—31.12.2020
ex3921905550Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems0 %m231.12.2020
ex3921906030Heat-, infra- and UV insulating poly(vinyl butyral) film:laminated with a metal layer with a thickness of 0,05 mm(± 0,01 mm),containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticiser,with a light transmission of 70 % or more (as determined by the ISO 9050 standard);with an UV transmission of 1 % or less (as determined by the ISO 9050 standard);with a total thickness of 0,43 mm (± 0,043 mm)0 %m231.12.2019
ex39219060ex54077100ex59039099912010Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form0 %—31.12.2018
ex3921906093Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances0 %—31.12.2018
ex3923100010Photomask or wafer compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage andwith or without a gasket seal,of a kind used in the photolithography or other semiconductor production to house photomasks or wafers0 %—31.12.2021
ex3923109010Photomask or wafer compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage andwith or without a gasket seal,of a kind used in the photolithography or other semiconductor production to house photomasks or wafers0 %—31.12.2021
ex3923309010Polyethylene container, for compressed hydrogen:with aluminium bosses at both ends,wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin,of a diameter of 213 mm or more, but not more than 368 mm,a length of 860 mm or more, but not more than 1260 mm anda capacity of 18 litres or more, but not more than 50 litres0 %p/st31.12.2018
ex39263000ex870829901010Plastic cover of the exterior rear-view mirror for motor vehicles with clips0 %p/st31.12.2020
ex39263000ex87082910ex87082990101010Plastic cover with cips for the exterior rear-view mirror of motor vehicles0 %p/st31.12.2020
ex3926300020Plastic logo of the automobile manufacturer with mounting brackets on the back side, whether or not chromed, for use in the manufacture of goods of Chapter 870 %—31.12.2021
ex39263000ex392690973034Electroplated interior or exterior decorative parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,layers of copper, nickel and chromiumfor use in the manufacturing of parts for motor vehicles of heading 8701 to 87050 %p/st31.12.2022
ex3926909220Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0 %—31.12.2018
ex3926909230Silicone shell for breast implant0 %—31.12.2021
ex3926909710Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm0 %—31.12.2018
ex3926909715Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems0 %—31.12.2018
ex3926909720Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls0 %p/st31.12.2019
ex39269097ex854390002015Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls0 %p/st31.12.2019
ex3926909725Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm0 %—31.12.2018
ex3926909730Parts of car radio and car air-conditioner front panelsof acrylonitrile-butadiene-styrene with or without polycarbonate,coated with a copper, a nickel and a chrome layers,with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm0 %—31.12.2021
ex3926909733Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls0 %p/st31.12.2019
ex39269097ex853890993740Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint0 %p/st31.12.2019
ex3926909750Knob of car radio front panel, made of Bisphenol A-based polycarbonate0 %p/st31.12.2018
ex3926909755Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m20 %m231.12.2018
ex3926909765Die-cast decoration element made of polycarbonate resin, coated witha silver-colour acrylic paint, anda transparent scratch-resistant paintof a kind used in the manufacture of car radio front panels0 %p/st31.12.2018
ex39269097ex851290907710Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems0 %p/st31.12.2021
ex3926909777Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems0 %p/st31.12.2021
ex4007000010Siliconated vulcanised rubber thread and cord0 %—31.12.2018
ex4009420020Rubber brake hose withtextile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,of kind used in the manufacture of goods of Chapter 870 %—31.12.2020
ex40103100ex40103300ex40103900101010Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 870 %—31.12.2021
ex4016930020Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mold split of not more than 0,25 mm, in the shape of a rectangle:with a length of 72 mm or more but not more than 825 mm;with a width of 18 mm or more but not more than 155 mm0 %—31.12.2020
ex4016995710Air intake hose for air supply to the combustion part of the engine comprising at least:one flexible rubber hose,one plastic hose, andmetal clips,whether or not a resonatorfor use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex4016995720Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex4016999720Soft rubber sealing stoppers for the manufacture of electrolytic capacitors0 %—31.12.2018
ex4016999730Tyre moulding bladder0 %—31.12.2021
ex4104411910Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry0 %—31.12.2017
ex4104411910Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry0 %—31.12.2022
4105100041053090Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2018
4106210041062290Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2018
41063100410632004106409041069200Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 41140 %—31.12.2018
ex4408393010Okoume veneer sheets:of a length of 1270 mm or more, but not more than 3200 mm,of a width of 150 mm or more, but not more than 2000 mm,of a thickness of 0,5 mm or more, but not more than 4 mm,not sanded andnot planed0 %—31.12.2018
ex44129940ex44129950ex44129985101020Laminated wood consisting of two layers of sheets for veneering:a width of 210 mm or more but not more than 320 mm,a length of 297 mm or more but not more than 450 mm,a thickness or 0,45 mm or more but not more than 0,8 mm,for use in the manufacture of products falling within heading 4420, 4421, 4820, 4909 or 49110 %—31.12.2021
ex5004001010Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk0 %—31.12.2021
ex50050010ex500500901010Yarn spun entirely from silk waste (noil), not put up for retail sale0 %—31.12.2018
ex5205310010Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons0 %—31.12.2018
52081110Fabrics for the manufacture of bandages, dressings and medical gauzes5,2 %—31.12.2018
ex5402450020Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid0 %—31.12.2018
ex5402470020Bicomponent monofilament yarn of not more than 30 dtex, consisting of:a poly(ethylene terephthalate) core, andan outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),for use in the manufacture of filtration fabrics0 %—31.12.2020
ex5402490030Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures0 %—31.12.2018
ex5402490050Non-textured filament yarn of poly(vinyl alcohol)0 %—31.12.2018
ex5402490070Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn0 %m31.12.2018
ex5403390010Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry0 %—31.12.2020
ex5404190020Monofilament of poly(1,4-dioxanone)0 %—31.12.2018
ex5404190050Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers0 %—31.12.2018
ex5404909020Strip of polyimide0 %—31.12.2018
ex5407100010Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’–oxybis (phenyleneamine)0 %—31.12.2017
ex5407100010Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine)0 %—31.12.2022
ex55031100ex560130001040Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7 mm0 %—31.12.2018
ex55039000ex55069000ex56013000201010Poly(vinyl alcohol) fibres, whether or not acetalized0 %—31.12.2018
ex5503900030Trilobal poly(thio-1,4-phenylene) fibres0 %—31.12.2019
ex56031110ex56031190ex56031210ex56031290ex56039110ex56039190ex56039210ex560392901010101010101010Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:of a thickness of 200 μm or more but not more than 280 μm andof a weight of 20 g/m2 or more but not more than 50 g/m20 %m231.12.2018
ex56031110ex560311902020Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins0 %m231.12.2017
ex56031290ex56031390ex56031490ex56039290ex56039390ex56039490303010604030Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0 %—31.12.2018
ex5603129050Non-woven:weighing 30 g/m2 or more, but not more than 60 g/m2,containing fibres of polypropylene or of polypropylene and polyethylene,whether or not printed, with:on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,and on other side a smooth untextured surface,for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles0 %m231.12.2017
ex5603129050Non-woven:weighing 30 g/m2 or more, but not more than 60 g/m2,containing fibres of polypropylene or of polypropylene and polyethylene,whether or not printed, with:on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,and on other side a smooth untextured surface,for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles0 %m231.12.2022
ex56031290ex560313906060Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2018
ex56031290ex56031390ex56039290ex5603939070704010Non-wovens of polypropylene,with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,with a weight of not more than 150 g/m2,in the piece or simply cut into squares or rectangles, andnot impregnated0 %m231.12.2018
ex56031310ex560314101010Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material0 %m231.12.2018
ex5603131020Non-woven of spunbonded polyethylene, with a coating,of a weight of more than 80 g/m2 but not more than 105 g/m2 andan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2020
ex5603149040Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2,whether or not laminated on one side with a membrane or a membrane and aluminiumof a kind used for the manufacture of industrial filters0 %m231.12.2018
ex56039290ex560393902020Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene0 %—31.12.2018
ex56039290ex560394907040Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene0 %—31.12.2018
ex56039290ex560393908050Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch propertiesfor use in the manufacture of infant/child care products0 %m231.12.2021
ex5603939060Nonwovens made of polyester fibres,with a weight of 85 g/m2,with a constant thickness of 95 μm (± 5 μm),neither coated nor covered,in 1 m wide rolls of 2000m to 5000 m length,suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters0 %m231.12.2018
ex5603949020Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips0 %—31.12.2018
ex5607509010Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures0 %—31.12.2019
ex5803001091Gauze of cotton, of a width of less than 1500 mm0 %—31.12.2018
ex59031090ex59032090ex59039099101020Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres0 %—31.12.2018
ex5903209020Two layers’ plastic-laminated textile fabric with:one layer consisting of knitted or crocheted polyester textile fabric,other layer consisting of polyurethane foam,a weight of 150 g/m2 or more, but not more than 500 g/m2,a thickness of 1 mm or more, but not more than 5 mmfor use in the manufacture of the retractable roof of motor vehicles0 %—31.12.2021
ex5906999010Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine)0 %—31.12.2018
ex5907000010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm0 %—31.12.2021
ex5911100010Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products0 %—31.12.2018
ex59119090ex842199003092Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %—31.12.2018
ex5911909040Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %—31.12.2019
ex59119099ex842199903092Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %—31.12.2018
ex5911909940Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %—31.12.2019
ex6804210020Discsof synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,having a self-sharpening effect by constant release of the diamonds,suitable for abrasive cutting of wafers,whether or not containing a hole in the centre,whether or not on a supportwith a weight of not more than 377 g per piece andwith an external diameter of not more than 206 mm0 %p/st31.12.2019
ex6805300010Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors0 %—31.12.2021
ex6813890020Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components0 %—31.12.2018
ex6814100010Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres0 %—31.12.2018
ex6903909020Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials0 %—31.12.2018
ex6909190015Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/– 0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight:90 % (± 1,5 %) of aluminium oxide7 % (± 1 %) of titanium oxide0 %p/st31.12.2017
ex6909190020Silicon nitride (Si3N4) rollers or balls0 %—31.12.2020
ex6909190025Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide0 %—31.12.2018
ex6909190030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0 %—31.12.2018
ex69091900ex691490005020Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:2 % or more of diboron trioxide,28 % or less of silicon dioxide and60 % or more of dialuminium trioxide0 %—31.12.2018
ex6909190060Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end0 %—31.12.2018
ex6909190070Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section0 %—31.12.2018
ex6914900030Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm0 %—31.12.2018
ex7004908010Alkali-aluminosilicate drawn flat glass sheet with:a scratch proof coating of a thickness of 45 μm (+/– 5 μm),a total thickness of 0,45 mm or more but not more than 1,1 mm,a width of 300 mm or more but not more than 3210 mm,a length of 300 mm or more but not more than 2000 mm,a visible light transmission of 90 % or more;an optical distortion of 55o or more0 %—31.12.2020
ex7005103010Float glass:of a thickness of 4,0 mm or more but not more than 4,2 mm,with a light transmission of 91 % or more measured using a D-type light source,coated on one surface with a fluorine doped tin dioxide reflective layer0 %—31.12.2017
ex7006009025Glass wafer made of borosilicate float glasswith a total thickness variation of 1 μm or less, andlaser-engraved0 %p/st31.12.2019
ex7007192010Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 85280 %—31.12.2018
ex7007290010Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides0 %—31.12.2018
ex7009100030Layered glass with mechanical dimming ability by different angles of incident light comprising:whether or not a layer of chrome,a break-resistance adhesive tape or hot-melt adhesive, anda release film on the front side and protective paper at the back side,of a kind used for interior rear-view mirrors of vehicles0 %p/st31.12.2019
ex7009100040Electrochromic self-dimming inside rear-view mirror, consisting of:a mirror supporta plastic casing andan integrated circuitfor use in the manufacture of motor vehicles of Chapter 870 %—31.12.2020
ex7009100050Unfinished electro-cromic auto-dimming mirror for motor vehicle rear-view mirrors:whether or not equipped with plastic backing plate,whether or not equipped with a heating element,whether or not equipped with Blind Spot Module (BSM) display0 %—31.12.2017
ex7009100050Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors:whether or not equipped with plastic backing plate,whether or not equipped with a heating element,whether or not equipped with Blind Spot Module (BSM) display0 %—31.12.2022
ex7009910010Unframed glass mirrors with:a length of 1516 mm (± 1 mm);a width of 553 mm (± 1 mm);a thickness of 3 mm (± 0,1 mm);the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm;a lead content of not more than 90 mg/kg anda corrosion resistance of 72 hours or more according to ISO 9227 salt spray test0 %p/st31.12.2020
70112000Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes0 %p/st31.12.2018
ex7014000010Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware0 %—31.12.2018
ex70191200ex701912000121Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method)0 %—31.12.2018
ex70191200ex701912000222Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials0 %—31.12.2018
ex70191200ex701912000323Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer0 %—31.12.2018
ex70191200ex701912000525Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)0 %—31.12.2017
ex70191200ex701912000525Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)0 %—31.12.2022
ex7019191010Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers0 %—31.12.2018
ex7019191015S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm/+ 1,5 μm)0 %—31.12.2017
ex7019191015S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm / + 1,5 μm)0 %—31.12.2022
ex7019191020Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2020
ex7019191025Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2020
ex7019191030Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate0 %—31.12.2019
ex7019191050Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated0 %—31.12.2017
ex7019191050Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated0 %—31.12.2022
ex7019191055Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:9 % or more but not more than 16 % of magnesium oxide,19 % or more but not more than 25 % of aluminium oxide,0 % or more but not more than 2 % of boron oxide,without calcium oxide,coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene0 %—31.12.2019
ex70191910ex701990006030High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)0 %—31.12.2018
ex70191910ex701990007020Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)0 %—31.12.2018
ex70191910ex701990008040Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene0 %—31.12.2018
ex7019390050Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts0 %—31.12.2021
ex70194000ex701940001119Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of:10ppm per°C or more but not more than 12ppm per°C in the length and width, and20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)0 %—31.12.2018
ex7019900010Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate0 %—31.12.2018
ex70200010ex761699901077Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body0 %p/st31.12.2021
ex7020001020Raw material for optical elements of fused silicon dioxide with:a thickness of 10 cm or more but not more than 40 cm anda weight of 100 kg or more0 %—31.12.2022
ex7201101110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm0 %—31.12.2021
ex7201103010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon0 %—31.12.2021
72025000Ferro-silico-chromium0 %—31.12.2018
ex7202998010Ferro-dysprosium, containing by weight:78 % or more of dysprosium, and18 % or more but not more than 22 % of iron0 %—31.12.2020
ex7315119010Roller type steel timing chain with a fatigue limit of 2 kN at 7000 rpm or more for use in the manufacture of engines of motor vehicles0 %—31.12.2022
ex7318190030Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex7320901091Flat spiral spring of tempered steel, with:a thickness of 2,67 mm or more, but not more than 4,11 mm,a width of 12,57 mm or more, but not more than 16,01 mm,a torque of 18,05 Nm or more, but not more than 73,5 Nman angle between the free position and the nominal position in exercise of 76o or more, but not more than 218ofor use in the manufacture of tensioners for power transmission belts, for internal combustion engines0 %p/st31.12.2018
ex7325991020Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors0 %p/st31.12.2019
ex7326200020Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling0 %—31.12.2021
ex7326909840Iron and steel weightswhether or not with parts of other materialwhether or not with parts of other metalswhether or not surface treatedwhether or not printedof a kind used for the production of remote controls0 %—31.12.2020
ex74091900ex741021001070Plates, rolls or sheets:with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,for use in the manufacture of circuit boards0 %—31.12.2018
ex74101100ex85079080ex85459090106030Roll of laminate foil of graphite and copper, with:a width of 610 mm or more but not more than 620 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric vehicle batteries0 %—31.12.2021
ex74101100ex85079080ex85459090106030Roll of laminate foil of graphite and copper, with:a width of 610 mm or more but not more than 620 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric rechargeable batteries (2)0 %—31.12.2021
ex7410210010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0 %—31.12.2018
ex7410210030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil0 %—31.12.2018
ex7410210040Sheet or plates:consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, orconsisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm0 %—31.12.2018
ex7410210050Plates:consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,covered on one or both sides with copper foilwith a thickness of not more than 0,15 mm andwith a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-6500 %—31.12.2018
ex7410210060Plates, rolls and sheets of synthetic or artificial resin:with a maximum thickness of not more than 25μm,coated on both sides with a copper film with a maximum thickness of 0,15 mm,with a minimum capacitance of 1,09pF/mm2,for use in the manufacture of circuit boards0 %—31.12.2018
ex74199990ex761699909160Disc (target) with deposition material, consisting of molybdenum silicide:containing 1mg/kg or less of sodium andmounted on a copper or aluminium support0 %—31.12.2018
76012020Slabs and billets of unwrought aluminium alloys4 %—31.12.2018
ex7601202010Slabs and billets of aluminium alloy containing lithium0 %—31.12.2017
ex7601202010Slabs and billets of aluminium alloy containing lithium0 %—31.12.2022
ex76042100ex760429901030Profiles made of aluminium alloy conforming to EN standard AW-6063 T5anodizedwhether or not lacqueredwith a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %) for use in the manufacture of goods of heading 83020 %p/st31.12.2018
ex76042910ex760612991020Sheets and bars of aluminium-lithium alloys0 %—31.12.2020
ex7604291040Bars and rods of aluminium alloys containing by weight:0,25 % or more but not more than 7 % of zinc, and1 % or more but not more than 3 % of magnesium, and1 % or more but not more than 5 % of copper, andnot more than 1 % of manganeseconsistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process0 %—31.12.2019
ex7605190010Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm0 %—31.12.2018
ex7605290010Wire of aluminium alloys containing by weight:0,10 % or more but not more than 5 % of copper, and0,2 % or more but not more than 6 % of magnesium, and0,10 % or more but not more than 7 % of zinc, andnot more than 1 % of manganeseconsistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process0 %m31.12.2019
ex7607119040Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %0 %—31.12.2021
ex76071190ex760711904757Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %0 %—31.12.2021
ex7607119060Plain aluminium foil with the following parameters:an aluminium content of 99,98 % or morea thickness of 0,070 mm or more but not more than 0,125 mmwith a cubic textureof a kind used for high voltage etching0 %—31.12.2021
ex76071990ex850790801080Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:a width of 595 mm or more but not more than 605 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electric vehicle batteries0 %—31.12.2021
ex76071990ex850790801080Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:a width of 595 mm or more but not more than 605 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (2)0 %—31.12.2021
ex7607209010Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries0 %—31.12.2017
ex76082020ex870891993040Assembly for supplying compressed air, whether or not with a resonator, comprising at least:one solid aluminium tube whether or not with mounting bracket,one flexible rubber hose, andone metal clipfor use in the manufacture of goods of Chapter 870 %—31.12.2022
ex7608208930Seamless aluminium alloyed extruded tubes with:an outer diameter of 60 mm or more but not more than 420 mm, anda wall thickness of 10 mm or more but not more than 80 mm0 %—31.12.2018
ex7613000020Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg0 %p/st31.12.2018
ex76169910ex870899973050Aluminium engine bracket, with dimensions of:height of more than 10 mm but not more than 200 mmwidth of more than 10 mm but not more than 200 mmlength of more than 10 mm but not more than 200 mmequipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:internal porosity not more than 1 mm;outer porosity not more than 2 mm;Rockwell hardness HRB 10 or moreof a kind used in the production of suspensions systems for engines in motor vehicles0 %p/st31.12.2019
ex76169910ex87089910ex87089997306050Aluminium engine bracket, with dimensions of:height of more than 10 mm but not more than 200 mmwidth of more than 10 mm but not more than 200 mmlength of more than 10 mm but not more than 200 mmequipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:internal porosity not more than 1 mm;outer porosity not more than 2 mm;Rockwell hardness HRB 10 or moreof a kind used in the production of suspensions systems for engines in motor vehicles0 %p/st31.12.2019
ex7616999015Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts0 %p/st31.12.2018
ex7616999025Metallised film:consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,with an optical density of each aluminium layer of not more than 3,0,with each aluminium layer separated by a resin layer,on a carrier film of PET, andon rolls of up to 50000 metres in length0 %—31.12.2019
ex76169990ex84828000ex88033000701040Connecting components for use in the production of helicopter tail rotor shafts0 %p/st31.12.2021
ex7616999075Parts in the shape of a rectangular frame:of painted aluminium,with a length of 1011 mm or more but not more than 1500 mm,with a width of 622 mm or more but not more than 900 mm,with a thickness of 0,6 mm (± 0,1 mm),of a kind used in the manufacture of TV sets0 %p/st31.12.2017
ex8101960010Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μma resistance of 40 Ohm or more but not more than 300 Ohm at length of 1 metreof a kind used in the production of heated car front windows0 %—31.12.2020
ex8101960020Tungsten wirecontaining by weight 99,95 % or more of tungsten, andwith a maximum cross-sectional dimension of not more than 1,02 mm0 %—31.12.2022
ex8102100010Molybdenum powder with:a purity by weight of 99 % or more anda particle size of 1,0 μm or more, but not more than 5,0 μm0 %—31.12.2017
ex8102100010Molybdenum powder with:a purity by weight of 99 % or more anda particle size of 1,0 μm or more, but not more than 5,0 μm0 %—31.12.2022
ex8103909010Tantalum sputtering target with:a copper-chromium alloy backing plate,a diameter of 312 mm, anda thickness of 6,3 mm0 %p/st31.12.2019
ex8104300035Magnesium powderof purity by weight of more than 99,5 %with a particle size of 0,2 mm or more but not more than 0,8 mm0 %—31.12.2020
ex8104900010Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light0 %—31.12.2018
ex8105900010Bars or wires made of cobalt alloy containing, by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium and7 % (± 2 %) ironconforming to the material specifications AMS 5842, of a kind used in the aerospace industry0 %—31.12.2017
ex8105900010Bars or wires made of cobalt alloy containing, by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium and7 % (± 2 %) ironconforming to the material specifications AMS 5842, of a kind used in the aerospace industry0 %—31.12.2018
ex8108200010Titanium sponge0 %—31.12.2018
ex8108200030Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm0 %—31.12.2018
ex8108200040Titanium alloy ingot,with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 6 % of aluminium2,5 % or more but not more than 5 % of tin2,5 % or more but not more than 4,5 % of zirconium0,2 % or more but not more than 1 % of niobium0,1 % or more but not more than 1 % of molybdenum0,1 % or more but not more than 0,5 % of silicon0 %—31.12.2020
ex8108200050Titanium alloy ingot,with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 7 % of aluminium1 % or more but not more than 5 % of tin3 % or more but not more than 5 % of zinc4 % or more but not more than 8 % of molybdenum0 %—31.12.2020
ex8108200055Titanium alloy ingot,with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or morea weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 7 % of aluminium,1 % or more but not more than 5 % of tin,3 % or more but not more than 5 % of zirconium,4 % or more but not more than 8 % of molybdenum0 %—31.12.2020
ex8108200060Titanium alloy ingot,with a diameter of 63,5 cm or more and a length of 450 cm or more,a weight of 6350 kg or more,containing alloy elements by weight of:5,5 % or more but not more than 6,7 % of aluminium,3,7 % of more but not more than 4,9 % of vanadium0 %—31.12.2020
ex8108200070Titanium alloy slab, witha height of 20,3 cm or more, but not more than 23,3 cm,a length of 246,1 cm or more, but not more than 289,6 cm,a width of 40,6 cm or more, but not more than 46,7 cm,a weight of 820 kg or more but not more than 965 kg,containing alloy elements by weight of:5,2 % or more but not more than 6,2 % of aluminium,2,5 % or more but not more than 4,8 % of vanadium0 %—31.12.2022
ex8108300010Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium0 %—31.12.2018
ex8108903010Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 650400 %—31.12.2019
ex8108903015Rods and wire of an alloy of titanium with:a uniform solid cross-section in a form of a cylinder,with a diameter of 0,8 mm or more, but not more than 5 mm,an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,a silicon content by weight of 0,3 % or more, but not more than 0,6 %,a niobium content by weight of 0,1 or more, but not more than 0,3 %, andan iron content by weight of not more than 0,2 %0 %kg31.12.2022
ex8108903020Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 871410000 %—31.12.2017
ex8108903020Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 871410400 %—31.12.2017
ex8108903060Forged cylindrical bars of titanium with:a purity of 99,995 % by weight or more,a diameter of 140 mm or more but not more than 200 mm,a weight of 5 kg or more but not more than 300 kg0 %—31.12.2021
ex8108903070Wire of an titanium alloy containing by weight:22 % (± 1 %) of vanadium, and4 % (± 0,5 %) of aluminiumor15 % (± 1 %) of vanadium,3 % (± 0,5 %) of chromium,3 % (± 0,5 % of tin and3 % (± 0,5 %) of aluminium0 %—31.12.2021
ex8108903080Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 or 49670 %—31.12.2020
ex8108905010Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 871410000 %—31.12.2018
ex8108905010Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 8714100 %—31.12.2018
ex8108905015Alloy of titanium, copper, tin, silicon, and niobium containing by weight:0,8 % or more but not more than 1,2 % of copper,0,9 % or more but not more than 1,15 % of tin,0,25 % or more but not more than 0,45 % of silicon and0,2 % or more but not more than 0,35 % of niobium,in sheets, plates, strips or foil0 %—31.12.2019
ex8108905025Strip of titanium alloy0 %—31.12.2021
ex8108905030Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:exhaust systems for internal combustion engines ortubes and pipes of subheading 810890600 %—31.12.2017
ex8108905035Plates, sheets and strips of an alloy of titanium0 %—31.12.2021
ex8108905050Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium0 %—31.12.2017
ex8108905060Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight:0,4 % or more but not more than 0,6 % of aluminium,0,35 % or more but not more than 0,55 % of silicon and0,1 % or more but not more than 0,3 % of niobium0 %—31.12.2018
ex8108905075Plates, sheets, strips and foil of titanium alloy, containing by weight:0,3 % or more but not more than 0,7 % of aluminium and0,25 % or more but not more than 0,6 % of silicon0 %—31.12.2021
ex8108905045Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:a thickness of 0,4 mm or more, but not more than 100 mm,a length of not more than 14 m, anda width of not more than 4 m0 %kg31.12.2022
ex8108905055Plates, sheets, strip and foil of an alloy of titanium0 %—31.12.2021
ex8108905080Plates, sheets, strips and foil of non-alloyed titaniumof a width of more than 750 mmof a thickness of not more than 3 mm0 %—31.12.2019
ex8108905085Strip or foil of non-alloyed titanium:containing more than 0,07 % by weight of oxygen (O2),of a thickness of 0,4 mm or more but not more than 2,5 mmconforming to the Vickers hardness HV1 standard of not more than 170of a kind used in the manufacture of welded tubes for nuclear power plant condensers0 %—31.12.2019
ex8108906030Seamless tubes and pipes of a titanium or an alloy of titanium with:a diameter of 19 mm or more but not more than 159 mm,a wall thickness of 0,4 mm or more but not more than 8 mm, anda maximum length of 18 m0 %kg31.12.2022
ex81089090ex900390003020Parts of spectacle frames and mountings, includingtemples,blanks of a kind used for the manufacture of spectacle parts andbolts of the kind used for spectacle frames and mountings,of a titanium alloy0 %p/st31.12.2021
ex8109200010Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry0 %—31.12.2018
ex8110100010Antimony in the form of ingots0 %—31.12.2018
ex8112993010Alloy of niobium (columbium) and titanium, in the form of bars and rods0 %—31.12.2018
ex8113009010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %—31.12.2017
ex8113009010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %—31.12.2022
ex8113009020Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules0 %—31.12.2020
ex8207191010Inserts for drilling tools with working parts of agglomerated diamonds0 %p/st31.12.2019
ex8207301010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles0 %p/st31.12.2017
ex8207301010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles0 %p/st31.12.2022
ex83016000ex84139100ex84199085ex84389000ex84689000ex84769010ex84769090ex84799070ex84819000ex85030099ex85159080ex85369040ex85369095ex85371098ex87089199ex8708999720403020202020833070309595702040Keypads of silicone or plastic,whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,whether or not printed or surface treated,whether or not with electrical conducting elementswhether or not with keypads foil glued on the keyboardwhether or not with protective foilsingle or multilayer0 %p/st31.12.2020
ex83016000ex84139100ex84199085ex84389000ex84689000ex84769090ex84799070ex84819000ex85030099ex85159080ex85369095ex85371098ex87089120ex87089199ex87089910ex8708999720403020202083307030957010205040Keypads of silicone or plastic,whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,whether or not printed or surface treated,whether or not with electrical conducting elements,whether or not with keypads foil glued on the keyboard,whether or not with protective foil,single or multilayer0 %p/st31.12.2020
ex8302200020Castors, withan external diameter of 21 mm or more but not more than 23 mm,a width with screw of 19 mm or more but not more than 23 mm,a U-shaped plastic outer ring,an assembly screw fitted to the internal diameter and used as an inner ring0 %p/st31.12.2020
ex8309909010Aluminium can ends:with a diameter of 99,00 mm or more but not more than 136,5 mm (± 1mm),whether or not with a "ring-pull" aperture0 %p/st31.12.2018
ex8401300020Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors0 %—31.12.2018
ex8401400010Stainless steel absorber control rods, filled with neutron absorbing chemical elements0 %p/st31.12.2019
ex84059000ex87082110ex87082190101010Metal casing for automobile safety belt pre-tension gas generators0 %p/st31.12.2019
ex84073320ex84073380ex84079080ex8407909010101010Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of heading 84331190,tractors of subheading 87019190, whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 orsnowploughs and snow blowers of subheading 8430200 %—31.12.2017
ex84073320ex84073380ex84079080ex8407909010101010Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of heading 84331190,tractors of subheading 87019190, whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 orsnowploughs and snow blowers of subheading 8430200 %—31.12.2022
ex8407901010Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 85080 %—31.12.2021
ex8407909020Compact Liquid Petroleum Gas (LPG) Engine System, with:6 cylinders,an output of 75 kW or more, but not more than 80 kW,inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 84270 %—31.12.2020
ex8408904120Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %—31.12.2018
ex8408904320Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %—31.12.2018
ex84089043ex84089045ex840890474030504 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:a capacity of not more than 3850 cm3, anda rated output of 15 kW or more but not more than 85 kW,for use in the manufacture of vehicles of heading 84270 %—31.12.2017
ex8409910020Fuel injector with solenoid valve for optimized atomization in the engine combustion chamber for spark-ignition internal combustion piston engines for use in the manufacture of motor vehicles of Chapter 870 %—31.12.2021
ex84099100ex840999003050Exhaust manifold with spiral-shaped gas turbine turbocharger component with:a heat-resistance of not more than 1050 °C, anda turbine wheel hole diameter of 30 mm or more, but not more than 110 mm0 %p/st31.12.2018
ex84089043ex84089045ex840890474030504 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:a capacity of not more than 3850 cm3, anda rated output of 15 kW or more but not more than 85 kW,for use in the manufacture of vehicles of heading 84270 %—31.12.2022
ex8409910040Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles0 %—31.12.2021
ex84099100ex840999005055exhaust manifold with turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 130 mm0 %p/st31.12.2018
ex8409990040Plastic or aluminum cylinder head cover with:a camshaft position sensor (CMPS),metal brackets for mounting on an engine, andtwo or more gaskets,for use in the manufacture of engines of motor vehicles0 %p/st31.12.2021
ex8409990060Intake manifold for air supply to the engine cylinders, comprising at least:a throttle,a boost pressure sensorfor use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2022
ex8409990070Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2021
ex8409990080High pressure oil jet for engine piston cooling and lubrication with:an opening pressure of 1 bar or more, but not more than 3 bar,a closing pressure of more than 0,7 bar,a one-way valvefor use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2022
ex8411990020Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,with a heat-resistance of not more than 1100 °C,with a diameter of 28 mm or more, but not more than 180 mm,with a height of 20 mm or more, but not more than 150 mm0 %p/st31.12.2022
ex8411990030Turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 130 mm0 %p/st31.12.2021
ex84099100ex84099900ex84119900653070Spiral-shaped gas turbine turbocharger component:with a heat-resistance of not more than 1050 °C,with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm,whether or not with an engine exhaust manifold0 %p/st31.12.2018
ex84099900ex847990701085Injectors with solenoid valve for optimised atomisation in the engine combustion chamber0 %p/st31.12.2021
ex8411990060Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,with a heat-resistance of not more than 1100 °C;with a diameter of 30 mm or more, but not more than 100 mm;with a height of 20 mm or more, but not more than 70 mm0 %p/st31.12.2017
ex8411990065Spiral-shaped gas turbine turbocharger component:with a heat-resistance of not more than 1050 °C, andwith a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm0 %p/st31.12.2021
ex8411990080Actuator for a single-stage turbocharger:whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm,with a length of not more than 350 mm,with a diameter of not more than 75 mm,with a height of not more than 110 mm0 %p/st31.12.2018
ex8413302030Single-cylinder radial-piston high pressure pump for gasoline direct injection with:an operating pressure of 200 bar or more, but not more than 350 bar,a flow control, anda pressure relief valve,for use in the manufacture of engines of motor vehicles0 %—31.12.2021
ex8413703520Single phase centrifugal pump:discharging at least 400 cm3 fluid per minute,with a noise level limited to 6 dBA,with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, andworking at ambient temperatures down to – 10 °C0 %—31.12.2020
ex8413910030Fuel pump cover:consisting of aluminum alloys,with a diameter of 38 mm or 50 mm,with two concentric, annular grooves formed on its surface,anodized,of a kind used in motor vehicles with petrol engines0 %p/st31.12.2019
ex8414308150Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment0 %—31.12.2019
ex84143081ex841480736030Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants:driven by "on-off single phase alternate current" (AC) or "brushless direct current" (BLDC) variable speed motorswith a nominal power rating of not more than 1,5 kWof a kind used in the production of household heat pump laundry tumble dryers0 %—31.12.2018
ex8414308920Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW0 %—31.12.2018
ex8414592530Axial fan:with an electric motor,of an output of not more than 125 Wfor use in the manufacture of computers0 %—31.12.2018
ex8414592540Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 85280 %—31.12.2020
ex84148022ex841480802020Air membrane compressor with:a flow of 4,5 l/min or more, but not more than 7 l/min,power input of not more than 8,1 W, anda gauge pressure capacity not exceeding 400 hPa (0,4 bar)of a kind used in the production of motor vehicle seats0 %—31.12.2022
ex8414900020Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles0 %p/st31.12.2019
ex8414900030Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles0 %p/st31.12.2018
ex8414900040Drive part, for compressors of air conditioning machines of motor vehicles0 %p/st31.12.2018
ex8415900020Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles0 %p/st31.12.2021
ex8415900030Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with:a length of 166 mm (+/– 1 mm),a diameter of 70 mm (+/– 1 mm),an internal capacity of 280 cm3 or more,a water absorption rate of 17 g or more, andan internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2of a kind used in car air-conditioning systems0 %p/st31.12.2020
ex8415900040Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems0 %p/st31.12.2020
ex8415900050Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with:a length of 291 mm (+/– 1 mm),a diameter of 32 mm (+/– 1 mm),a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm,a solid particle diameter of not more than 0,06 mmof a kind used in car air-conditioning systems0 %p/st31.12.2020
ex8415900055Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with:a length of 143 mm or more but not more than 292 mm,a diameter of 31 mm or more but not more than 99 mm,a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, anda solid particle diameter of not more than 0,06 mmof a kind used in car air-conditioning systems0 %p/st31.12.2020
ex8418991050Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment0 %p/st31.12.2019
ex8418991060Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment0 %p/st31.12.2019
ex8421210020Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:ultrafiltration systemcarbon filtration systemwater softener systemfor use in a biopharmaceutical laboratory0 %p/st31.12.2019
ex8421999091Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0 %p/st31.12.2018
ex8421999093Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3700 mm and a diameter of not more than 500 mm0 %p/st31.12.2018
ex84223000ex847989971030Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges0 %p/st31.12.2018
ex8424897020Mechanical passenger car headlights washer with telescopic hose, high pressure nozzles and mounting clamps for use in the manufacture of goods of Chapter 870 %—31.12.2021
ex8424908030Containers of poly(ethylene terephthalate), with a content of 50 ml or more but not more than 600 ml, equipped with a nozzle, of a kind used as a part of mechanical appliances for spraying liquids0 %p/st31.12.2018
ex8431200030Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 84270 %p/st31.12.2017
ex8431200030Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 84270 %p/st31.12.2022
ex8431200040Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 84270 %p/st31.12.2018
ex8436990010Part containing:a single-phase AC motor,an epicyclic gearing,a cutter bladeand whether or not containing:a capacitor,a part fitted with a threaded boltfor use in the manufacture of garden shredders0 %p/st31.12.2020
ex8439990010Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more0 %p/st31.12.2018
ex84679900ex853650111035Mechanical switches for connecting electrical circuits, with:a voltage of 14,4 V or more but not more than 42 V,an amperage of 10 A or more but not more than 42 A,for use in the manufacture of machines falling within heading 84670 %p/st31.12.2019
ex84752900ex851410801010Glass Filament Melter with heater basket/bushing assembly:electrically heated,with openingwith a multiplicity of tips (holes) of platinum/rhodium alloyused to melt glass batches and condition molten glassfor drawing into continuous fibres0 %p/st31.12.2018
ex8477809910Machines for casting or for surface modification of plastic membranes of heading 39210 %p/st31.12.2018
ex84798997ex84799020ex84799070508080Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line0 %p/st31.12.2020
ex8479899760Bioreactor for biopharmaceutical cell culturehaving interior surfaces of austenitic stainless steel, andwith a process capacity up to 15000 litres,whether or not combined with a "clean-in-process" system and/or a dedicated paired media hold vessel0 %p/st31.12.2021
ex8479899770Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy0 %p/st31.12.2019
ex8479899780Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries0 %p/st31.12.2019
ex8479899785High Pressure Hard Materials Compression Press ("Link Press"):with a 16000 tonne pressure rating,with a 1100mm diameter Bolster (± 1mm),with a 1400mm main cylinder (± 1mm),with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system,with a double arm manipulator arrangement and connections for piping and electrical systems,with a total weight 310 tonnes (± 10 tonnes), andcreating 30000 atmospheres at 1500 degrees centigrade using Low Frequency Alternating Current (16000 amps)0 %p/st31.12.2020
ex8479907087Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles0 %p/st31.12.2021
ex8481309191Steel check (non-return) valves with:an opening pressure of not more than 800 kPa,an external diameter not more than 37 mm0 %p/st31.12.2019
ex8481805910Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines0 %p/st31.12.2018
ex8481805920Pressure regulating valve for incorporation into compressors of motor vehicle air condition units0 %p/st31.12.2021
ex8481806960Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valvea brass valve body including valve slider and copper connectionswith a working pressure up to 4,5 MPa0 %p/st31.12.2017
ex8481806960Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valvea brass valve body including valve slider and copper connectionswith a working pressure up to 4,5 MPa0 %p/st31.12.2022
ex8481807920Solenoid valve device that can withstand a pressure of 875 bar0 %p/st31.12.2018
ex84821010ex84821090ex84825000101010Ball and cylindrical bearings:with an outside diameter of 28 mm or more but not more than 140 mm,with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa,for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants0 %p/st31.12.2019
ex84821010ex848210903020Ball bearings:with an internal diameter of 3 mm or more,with an external diameter of not more than 100 mm,with a width of not more than 40 mm,whether or not equipped with a duster,for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears0 %p/st31.12.2019
ex8483303840Cylindrical bearing housing:of precision-cast grey cast iron complying with standard DIN EN 1561,with oil chambers,without bearings,with a diameter of 50 mm or more, but not more than 250 mm,with a height of 40 mm or more, but not more than 150 mm,whether or not with water chambers and connectors0 %p/st31.12.2017
ex84821010ex848210904030Ball bearings:with an internal diameter of 3 mm or more,with an external diameter of not more than 100 mm,with a width of not more than 40 mm,whether or not equipped with a duster,for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears or assembly ball screw for steering gears0 %p/st31.12.2019
ex84833032ex848330382050Bearing housing of a kind used in turbochargers:of precision-cast grey cast iron complying with standard DIN EN 1561,with oil chambers,without bearings,with a diameter of 50 mm or more, but not more than 250 mm,with a height of 40 mm or more, but not more than 150 mm,whether or not with water chambers and connectors0 %p/st31.12.2022
ex8483402950Gear set of cycloid gear type with:a rated torque of 50 Nm or more but not more than 9000 Nm,standard ratios of 1:50 or more but not more than 1:475,lost motion of not more than one arc minute,an efficiency of more than 80 %of a kind used in robot arms0 %p/st31.12.2021
ex8483402960Epicyclic gearing, of a kind used in driving hand-held power tools with:a rated torque of 25 Nm or more, but not more than 70 Nm,standard gear ratios of 1:12,7 or more, but not more than 1:64,30 %p/st31.12.2018
ex8483405120Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 843311510 %p/st31.12.2018
ex8483405920Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 843311510 %p/st31.12.2018
ex8483409020Hydrostatic transmission with:measurements (without shafts) of not more than 154 mm × 115 mm × 108 mm,a weight of not more than 3,3 kg,a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,a torque of the output shaft of not more than 10,4 Nm,a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, andan operating temperature range of – 5 °C or more, but not more than + 40 °Cfor use in the manufacture of hand-operated lawn mowers of heading 843311900 %—31.12.2022
ex8483409030Hydrostatic transmission witha reduction of 20,63:1 or more, but not more than 22,68:1,an input speed of 1800 rpm or more when loaded and of not more than 3000 rpm when unloaded,a continuous output torque of 142 Nm or more, but not more than 156 Nm,an intermittent output torque of 264 Nm or more, but not more than 291 Nm, andan axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm,whether or not equipped with a fan impeller or with a pulley with integrated fan impellerfor use in the production of self-propelled lawn mowers with a seat of subheading 84331151, and tractors of subheading 87019190, whose main function is that of a lawn mower0 %—31.12.2022
ex8483409080Transmission gearbox, with:not more than 3 gears,an automatic deceleration system anda power reversal system,for use in the manufacture of goods of heading 84270 %p/st31.12.2020
ex8484200010Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units0 %p/st31.12.2021
ex8501101020Synchronous motor for a dishwasher with a water flow control mechanism witha length without axle of 24 mm (+/– 0,3),a diameter of 49,3 mm (+/– 0,3)a rated voltage of 220 V AC or more but not more than 240 V AC,a rated frequency of 50 Hz or more but not more than 60 Hz,an input power of not more than 4 W,a rotation speed of 4rpm or more but not more than 4,8 rpm,an output torque of not less than 10 kgf/cm0 %—31.12.2020
ex8501109954DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2260 (± 15 %) rpm or 5420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V0 %—31.12.2018
ex8501109955Electric turbocharger actuator, with:a DC motor with an output of 10 W or more but not more than 15 W,an integrated gear mechanism,a (pulling)force of 250 N or more at 160 °C elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 20 mm,with or without an on-board diagnostics interface0 %—31.12.2020
ex8501109956DC Motor:with a speed rotation of not more than 7000 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximum power of 13,78 W (at 3,09 A),with a specified temperature range from – 40 °C to 160 °C,with a gear connection,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 100 Nm0 %—31.12.2021
ex8501109957DC motor:with a rotor speed of not more than 6500 rpm when not loaded;with a rated voltage of 12,0 V (+/– 0,1);of a specified temperature range of – 40 °C or more, but not more than + 165 °C;with or without a connecting pinion;with or without an engine connector0 %—31.12.2020
ex8501109958DC Motor:with a speed rotation of not more than 6500 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximal power below than 20 W,with a specified temperature range from – 40 °C to 160 °C,with a worm gear drive,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 75 Nm0 %—31.12.2021
ex8501109960DC motor:with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loadedwith a power supply voltage of 100 V or more but not more than 240 Vfor use in the manufacture of electric fryers0 %—31.12.2017
ex8501109960DC motor:with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loadedwith a power supply voltage of 100 V or more but not more than 240 Vfor use in the manufacture of electric fryers0 %—31.12.2022
ex8501109965Electric turbocharger actuator, with:a DC motor,an integrated gear mechanism,a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 25 mm,with or without an on-board diagnostics interface0 %—31.12.2020
ex8501109970DC stepping motor, withan angle of step of 7,5° (± 0,5°)a two-phase winding,a rated voltage of 9 V or more, but not more than 16,0 Vof a specified temperature range covering at least – 40 °C to + 105 °Cwith or without connecting pinionwith or without motor drive connector0 %—31.12.2018
ex8501109975Permanently excited DC motor witha multiple-phase windingan external diameter of 28 mm or more but not more than 35 mm,a rated speed of not more than 12000 rpm,a power supply voltage of 8 V or more but not more than 27 V0 %—31.12.2020
ex8501109979DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C0 %—31.12.2018
ex8501109980DC stepping motor, with:an angle of step of 7,5o (± 0,5o),a pull-out torque at 25 °C of 25 mNm or more,a pull-out pulse rate of 1500 pps or more,a two-phase winding, anda rated voltage of 10,5 V or more, but not more than 16,0 V0 %—31.12.2018
ex8501109981DC stepping motor, with an angle of step of 18 o or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W0 %—31.12.2018
ex8501109982DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1500 (± 15 %) rpm or 6800 (± 15 %) rpm, a supply voltage of 2 V or 8 V0 %—31.12.2019
ex8501200030Universal AC/DC motor witha rated output of 1,2 kW,a supply voltage of 230 V, andengine brake,assembled to a reduction gear with output shaft, which is contained in a plastic housingfor use as electric drive of lawnmower blades0 %—31.12.2022
ex8501310025DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 100 mm,a supply voltage of 12 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without the rotor angle position sensor of resolver type or Hall effect type,of the kind used in power steering systems for cars0 %—31.12.2017
ex8501310025DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 100 mm,a supply voltage of 12 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without the rotor angle position sensor of resolver type or Hall effect type,of the kind used in power steering systems for cars0 %—31.12.2022
ex8501310030DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)0 %—31.12.2021
ex8501310033Brushless DC motor assembly comprised of a motor and transmission, with:an electronic control operating by Hall Effect position sensors,a voltage input 9 V or more but not more than 16 V,an external diameter of 70 mm or more but not more than 80 mm,an output motor power 450 W or more but not more than 500 W,a maximum output torque 50 Nm or more but not more than 52 Nm,a maximum output rotation speed 280 rpm or more but not more than 300 rpm,a coaxial male spline outputs with an outer diameter of 20 mm (± 1 mm), 17 teeth and a minimum length of the teeth of 25 mm (± 1 mm), anda distance between root of splines of 119 mm (± 1 mm)for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex85013100ex850132003570Automotive-ready, brushless and permanently excited direct current motor with:a specified speed of not more than 4000 rpm,a minimum output of 400 W, but not more than 1,3 kW (at 12V),a flange diameter of 90 mm or more, but not more than 150 mm,a maximum length of 190 mm, measured from the beginning of the shaft to the outer ending,a housing length of not more than 150 mm, measured from the flange to the outer ending,a two-piece (basic housing including electric components and flange with minimum 2 and maximum 6 bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease),a stator with single T-tooth design and single coil windings in 12/8 topology andsurface magnets0 %—31.12.2020
ex8501310040Permanently excited DC motor witha multiple-phase winding,an external diameter of 30 mm or more but not more than 80 mm,a rated speed of not more than 15000 rpm,an output of 45 W or more but not more than 300 W anda supply voltage of 9 V or more but not more than 25 V0 %—31.12.2019
ex8501310045DC motors, brushless, with:an external diameter of 90 mm or more, but not more than 110 mm,a rated speed of not more than 3680 rpm,an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 °C,a supply voltage of 12 V,a torque of not more than 5,67 Nm,a rotor position sensor,an electronic star-point relay, andfor use with an electric power steering control module0 %—31.12.2018
ex8501310055DC motor with commutator, withan external diameter of 27,5 mm or more, but not more than 45 mm,a rated speed of 11000 rpm or more, but not more than 23200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of not more than 529 W,a free load current of not more than 3,1 A,a maximum efficiency of 54 % or more,for driving hand-held power tools0 %—31.12.2018
ex8501310075Brushless DC motor assembly comprised of a motor and transmission, with:electronic control operating by Hall Effect position sensors,voltage input 9V or more but not more than 16 V,external diameter of the motor 70 mm or more but not more than 80 mm,output motor power 350 W or more but not more than 550 W,maximum output torque 50 Nm or more but not more than 52 Nm,maximum output rotation speed 280 rpm or more but not more than 300 rpm,coaxial male spline outputs of outer diameter 20 mm (± 1 mm), 17 teeth and minimum length of teeth 25 mm (± 1 mm), andwith distance between root of splines 119 mm (± 1 mm)for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex85013100ex850132007875Automotive-ready, brushless and permanently excited direct current motor with:a specified speed of not more than 4100 rpm,a minimum output of 400 W, but not more than 1,3 kW (at 12 V),a flange diameter of 90 mm or more, but not more than 150 mm,a maximum length of 200 mm, measured from the beginning of the shaft to the outer ending,a housing length of not more than 160 mm, measured from the flange to the outer ending,a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 6 bore holes) aluminium diecast housing whether or not with a sealing compound (groove with an O-ring and grease),a stator with single T-tooth design and single coil windings in 12/8 topology, andsurface magnets0 %—31.12.2020
ex85013200ex850133005055Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems0 %—31.12.2018
ex85013200ex850133006015Traction motor, with:a torque output of 200 Nm or more but not more than 300 Nma power output of 50 kW or more but not more than 100 kWa rated speed of not more than 12500 rpmfor use in the manufacture of electric vehicles0 %—31.12.2019
ex85013300ex85014080ex85015350305010Electric drive for motor vehicles, with an output of not more than 315 kW, with:an AC or DC motor whether or not with transmission,power electronics0 %—31.12.2021
ex85015100ex850152203050AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with:an output of 340 W or more but not more than 7,4 kW,a flange of dimensions of not more than 180 mm × 180 mm, anda length from flange to extreme end of resolver of not more than 271 mm0 %—31.12.2021
ex8501612035Fuel cell module, AC generator with an output of 7.5 kVA or less, consisting of:a Hydrogen generator (desulphurizer, reformer and cleaner)a PEM fuel cell stack andan Inverterfor use as a part in a heating appliance0 %—31.12.2020
ex8501620030Fuel cell systemconsisting of at least phosphoric acid fuel cells,in a housing with integrated water management and gas treatment,for permanent, stationary energy supply0 %—31.12.2017
ex8501620030Fuel cell systemconsisting of at least phosphoric acid fuel cells,in a housing with integrated water management and gas treatment,for permanent, stationary energy supply0 %—31.12.2022
ex85030091ex850300993132Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring0 %p/st31.12.2018
ex8503009931Stamped collector of an electric motor, having an external diameter of not more than 16 mm0 %p/st31.12.2018
ex8503009933Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2021
ex8503009934Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2019
ex8503009935Transmitter resolver for brushless motors of electrical power steering0 %p/st31.12.2019
ex8503009940Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 85010 %p/st31.12.2017
ex8503009940Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 85010 %p/st31.12.2022
ex8503009950Stator for brushless motor, with:an internal diameter of 206,6 mm (± 0,5)an external diameter of 265,0 mm (± 0,2) anda width of 41,00 mm (± 0,3)of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums0 %p/st31.12.2018
ex8503009960Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)0 %p/st31.12.2019
ex8504318020Transformer for use in the manufacture of inverters in LCD modules0 %—31.12.2017
ex8504318030Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters0 %—31.12.2018
ex8504318040Electrical transformers:with a capacity of 1 kVA or lesswithout plugs or cables,for internal use in the manufacture of set top boxes and TVs0 %—31.12.2017
ex8504318040Electrical transformers:with a capacity of 1 kVA or lesswithout plugs or cables,for internal use in the manufacture of set top boxes and TVs0 %—31.12.2022
ex8504318050Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry0 %—31.12.2021
ex8504318050Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry0 %—31.12.2021
ex8504408240Printed circuit board equipped with a bridge rectifier circuit and other active and passive components:with two output connectorswith two input connectors which are available and useable in parallelable to switch between bright and dimmed operation modewith an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, orwith an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, orwith an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation modewith an input current reaching 80 % of its nominal value within 20 mswith an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versionswith an maximum inrush current overshoot of not more than 250 % of the input currentwith a period of the inrush current overshoot of not more than 100 mswith an input current undershoot of not less than 50 % of the input currentwith a period of the inrush current undershoot of not more than 20 mswith a presettable output currentwith an output current reaching 90 % of its nominal pre-set value within 50 mswith an output current reaching zero within 30 ms after removal of the input voltagewith an defined failure status in case of no-load or too-high load (end-of-life function)0 %p/st31.12.2017
ex8504408240Printed circuit board equipped with a bridge rectifier circuit and other active and passive components:with two output connectorswith two input connectors which are available and useable in parallelable to switch between bright and dimmed operation modewith an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, orwith an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, orwith an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation modewith an input current reaching 80 % of its nominal value within 20 mswith an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versionswith an maximum inrush current overshoot of not more than 250 % of the input currentwith a period of the inrush current overshoot of not more than 100 mswith an input current undershoot of not less than 50 % of the input currentwith a period of the inrush current undershoot of not more than 20 mswith a presettable output currentwith an output current reaching 90 % of its nominal pre-set value within 50 mswith an output current reaching zero within 30 ms after removal of the input voltagewith an defined failure status in case of no-load or too-high load (end-of-life function)0 %p/st31.12.2022
ex8504408250Electric rectifier:with an input AC voltage of 100-240 V at frequency of 50-60 Hz,with two output DC voltages of 9 V or more but not more than 12 V and 396 V or more but not more than 420 V,output cables without connectors, andin a plastic enclosure with dimensions 110 mm (± 0,5 mm) × 60 mm (± 0,5 mm) × 38 mm (± 1 mm)for use in the manufacture of products using IPL (Intensive Pulse Light)0 %p/st31.12.2022
ex8504408830DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles0 %p/st31.12.2019
ex8504409015Semiconductor power module (so called Smart Power Module) for converting single-phase AC input voltage into 2 or 3-phase AV voltage used to power up polyphase AC variable-speed electrical drives, in a casing fitted with one or more integrated circuits, IGBTs, diodes and thermistors, having an output voltage of 600 VAC or 650 VAC, and a rated current of 4 A or more, but not more than 30 A0 %—31.12.2021
ex8504409020Direct current to direct current converterwithout housing orwith housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing0 %p/st31.12.2021
ex8504409025Direct current to direct current converterwithout housing orwith housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing0 %p/st31.12.2021
ex8504409030Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 851650000 %p/st31.12.2018
ex8504409040Semiconductor power modules comprising:power transistors,integrated circuits,whether or not containing diodes and with or without thermistors,an operating voltage of not more than 600 V,not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, anda rms (root mean square) current rating of not more than 15,7 A0 %p/st31.12.2018
ex8504409050Drive unit for industrial robot with:one or six 3-phase motor outputs with maximum 3 × 32 A,a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DCa logic power input of 24 V DC,an EtherCat communication interface,and a dimension of 150 × 140 × 120 mm or more, but not more than 335 × 430 × 179 mm0 %p/st31.12.2018
ex8504409060Transfer moulded semiconductor power module comprising:power transistors,integrated circuits,whether or not containing diodes and with or without thermistors,a circuit configuration,either containing a direct drive stage with an operating voltage of more than 600 V,or containing a direct drive stage with an operating voltage of not more than 600 V and a rms current of more than 15,7 A,or including one or more power factor correction modules0 %p/st31.12.2018
ex8504409070Module for converting alternating current into direct current and direct current into direct current witha rated power of not more than 100 Wan input voltage of 80 V or more, but not more than 305 Van certified input frequency of 47 Hz or more, but not more than 440 Hzone or more constant voltage output(s)an operating temperature range of – 40 °C or more, but not more than + 85 °C,pins for mounting to a printed circuit0 %p/st31.12.2018
ex8504409080Power converter containing:a DC to DC convertera charger of a capacity of not not more than 7 kWswitching functionsfor use in the manufacture of electric vehicles0 %p/st31.12.2019
ex8504509520Inductors with one or more windings, having an inductance of not more than 62 mH per winding/coil0 %p/st31.12.2018
ex8504509540Coil choke with:an inductance of 4,7 μΗ (± 20 %),a DC resistance of not more than 0,1 Ohms,an insulation resistance of 100 MOhms or more at 500 V (DC)for use in the manufacture of LCD and LED module power boards0 %p/st31.12.2020
ex8504509550Solenoid coil witha power consumption of not more than 6 W,an insulation resistance of more than 100 M ohms, andan insert hole of 11,4 mm or more, but not more than 11,8 mm0 %p/st31.12.2017
ex8504509550Solenoid coil witha power consumption of not more than 6 W,an insulation resistance of more than 100 M ohms, andan insert hole of 11,4 mm or more, but not more than 11,8 mm0 %p/st31.12.2022
ex8504509560Inductors with one or more windings, with an inductance per winding of not more than 350 mH, for use in the manufacture of electronic control gear, control units and LED light sources for the lighting industry0 %—31.12.2021
ex8504509570Solenoid coil with:a rated power of more than 10 W but not more than 15 W,an insulation resistance of 100 M Ohms or more,a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,a rated current of not more than 1,22 A,a rated voltage of not more than 25 V0 %p/st31.12.2021
ex8504901110Ferrite cores, other than for deflection yokes0 %p/st31.12.2018
ex8504901120Reactor cores for use in a High Voltage Direct Current thyristor converter0 %p/st31.12.2019
ex8504909920Thyristor SGCT (Symmetric Gate-Commutated Thyristor) with integrated gate driver:being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and electric and electronic components,having an ability to block the voltage - 6500 V — in both directions (conducting and the reverse direction)of a kind used in medium voltagestatic converters (rectifiers and inverters)0 %p/st31.12.2019
ex8505110031Permanent magnet having a remanence of 455 mT (± 15 mT)0 %p/st31.12.2018
ex8505110033Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle witha length of not more than 90 mm,a width of not more than 90 mm anda height of not more than 55 mm,or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre0 %p/st31.12.2018
ex8505110035Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications0 %p/st31.12.2017
ex8505110045A quarter sleeve, intended to become permanent magnet after magnetisation,consisting of at least neodymium, praseodym, iron, boron, dysprosium, aluminium and cobalt,with a width of 9,2 mm (– 0,1)with a length of 20 mm (+ 0,1) or 30 mm (+ 0,1)of a kind used on rotors for the manufacture of fuel pumps0 %p/st31.12.2019
ex8505110047Articles in the form of a triangle, square or rectangle, whether or not shaped or with rounded corners intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions:a length of 9 mm or more but not more than 105 mm,a width of 5 mm or more but not more than 105 mm, anda height of 2 mm or more but not more than 55 mm0 %—31.12.2021
ex8505110050Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,of a kind to be used in the manufacture of electric servomotors for industrial automation0 %p/st31.12.2017
ex8505110050Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,of a kind to be used in the manufacture of electric servomotors for industrial automation0 %p/st31.12.2022
ex85051100ex850519905540Flat bars of an alloy of samarium and cobalt witha length of 30,4 mm (± 0,05 mm);a width of 12,5 mm (± 0,15 mm);a thickness of 6,9 mm (± 0,05 mm), or composed of ferrites in the shape of a quarter sleeves with:a length of 46 mm (± 0,75 mm);a width of 29,7 mm (± 0,2 mm),intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars0 %p/st31.12.2020
ex8505110060Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, witha diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation0 %—31.12.2017
ex8505110060Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, witha diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation0 %—31.12.2022
ex8505110065Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section havinga length of not more than 140 mm,a width of not more than 90 mm, anda thickness of not more than 55 mm,or in the shape of curved rectangle (tile type) havinga length of not more than 75 mm,a width of not more than 40 mm,a thickness of not more than 7 mm, anda radius of curvature of more than 86 mm but not more than 241 mmor in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre0 %p/st31.12.2018
ex8505110070Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnetwhether or not containing a hole in the centre,with a diameter of not more than 90 mm,of a kind used in car loudspeakers0 %—31.12.2018
ex8505110075A quarter sleeve intended to become permanent magnet after magnetization,consisting of at least neodymium, iron and boron,with a width of 9,1 mm or more but not more than 10,5 mm,with a length of 20 mm or more but not more than 30,1 mm,of a kind used on rotors for the manufacture of fuel pumps0 %p/st31.12.2019
ex8505199030Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between245 mT and 470 mT0 %—31.12.2018
ex8505199050Article of agglomerated ferrite in the shape of a rectangular prism to become permanent magnet after magnetisationwhether or not with bevelled edgesof a length of 27 mm or more but not more than 32 mm (± 0,15 mm),of a width of 8,5 mm or more but not more than 9,5 mm (+ 0,05 mm/– 0,09 mm),of a thickness of 5,5 mm or more but not more than 5,8 mm (+ 0/– 0,2 mm), andof a weight of 6,1 g or more but not more than 8,3 g0 %—31.12.2022
ex8505200030Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles0 %p/st31.12.2018
ex8505902930Coil for an electromagnetic valve, with:a plungera diameter of 12,9 mm (+/– 0,1),a height without plunger of 20,5 mm (+/– 0,1),an electric cable with connector, andin a cylindrical metal housing0 %p/st31.12.2019
ex8505902991Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 85170 %p/st31.12.2018
ex8506501010Lithium cylindrical primary cells with:a diameter of 14,0 mm or more but not more than 26,0 mm,a length of 2,2 mm or more but not more than 51 mm,a voltage of 1,5 V or more, but not more than 3,6 V,a capacity of 0,15 Ah or more, but not more than 5,00 Ahfor use in the manufacture of telemetry and medical devices, electronic meters or remote controls0 %—31.12.2021
ex8506509010Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V0 %—31.12.2018
ex8506509020Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit0 %—31.12.2018
ex8506509030Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah0 %—31.12.2018
ex8507102030Lead-acid accumulators or modules, witha nominal capacity of not more 32 Ah,a length of not more than 205 mm,a width of not more than 130 mm anda height of not more than 190 mmfor use in the manufacture of articles of heading 87110 %—31.12.2018
ex8507102080Lead acid starter battery, with:a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge,a liquid electrolyte,for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls0 %—31.12.2020
ex8507302030Cylindrical nickel-cadmium accumulator or module, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries0 %—31.12.2018
ex85075000ex850760002020Rectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries0 %—31.12.2018
ex8507500030Cylindrical nickel-hydride accumulator or module, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries0 %—31.12.2018
ex8507600015Cylindrical lithium-ion-accumulators or modules with:a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,a nominal voltage of 36 V or more, but not more than 48 V,a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles0 %—31.12.2020
ex8507600017Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:a rated voltage of 12 V,a length of 350 mm or more but not more than 355 mm,a width of 170 mm or more but not more than 180 mm,a height of 180 mm or more but not more than 195 mm,weighing 10 kg or more but not more than 15 kga nominal charge of 60 Ah or more, but not more than 80 Ah0 %—31.12.2020
ex8507600023Lithium-ion-accumulator or module with:a nominal capacity of 72 Ah or more, but not more than 100 Ah,a nominal voltage of 3,2 Va weight of 1,9 kg more, but not more than 3,4 kgfor use in the manufacture of rechargeable hybrid electric vehicle batteries0 %—31.12.2020
ex8507600025Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1mm)a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm)a weight of 45,9 kg or 46,3 kga rating of 75 Ah anda nominal voltage of 60 V0 %—31.12.2017
ex8507600025Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:a width of 352,5 mm (± 1 mm) or 367,1 mm (±1mm)a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm)a weight of 45,9 kg or 46,3 kga rating of 75 Ah anda nominal voltage of 60 V0 %—31.12.2022
ex8507600027Lithium-ion cylindrical accumulator with:a nominal capacity of 10 Ah or more, but not more than 20 Ah;a nominal voltage of 12,8 V (± 0,05) or more, but not more than 15,2 V (± 0,05);a power of 128 Wh or more, but not more than 256 Wh,for use in the manufacture of electric bicycle drives0 %—31.12.2020
ex8507600030Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries0 %—31.12.2019
ex8507600033Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 300 mma width of 700 mm or more, but not more than 1000 mma height of 1100 mm or more, but not more than 1500 mma weight of 75 kg or more, but not more than 160 kga nominal capacity not less than 150 Ah and not more than 500 Ah0 %—31.12.2020
ex8507600037Lithium-ion accumulator, with:a length of 1200 mm or more, but not more than 2000 mma width of 800 mm or more, but not more than 1300 mma height of 2000 mm or more, but not more than 2800 mma weight of 1800 kg or more, but not more than 3000 kga nominal capacity of 2800 Ah or more but not more than 7200 Ah0 %—31.12.2020
ex8507600043Lithium-ion accumulators, witha thickness of not more than 4,15 mm,a width of not more than 245,15 mm,a length of not more than 90,15 mm,a nominal capacity of 1000 mAh or more but not more than 10000 mAh,a weight of not more than 250 gfor use in the manufacture of products falling within subheading 847130000 %—31.12.2020
ex85076000ex850780004520Rechargeable lithium-ion polymer battery with:a nominal capacity of 1060 mAh,a nominal voltage of 7,4 V (average voltage at 0,2 C discharge),a charging voltage of 8,4 V (± 0,05),a length of 86,4 mm ((± 0,1),a width of 45 mm (± 0,1),a height of 11 mm (± 0,1),for use in the manufacture of cash registers0 %—31.12.2019
ex8507600047Lithium-ion accumulators, witha thickness of not more than 4,15 mm,a width of not more than 75,15 mm,a length of not more than 150,15 mm,a nominal capacity of 1000 mAh or more but not more than 10000 mAh,a weight of not more than 150 g,for use in the manufacture of products falling within subheading 851712000 %—31.12.2020
ex8507600050Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 408 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 138 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda power of 458 Wh or more, but not more than 2158 Wh0 %—31.12.2017
ex8507600053Batteries of lithium-ion electric accumulators or rechargeable module:a length of 1203 mm or more, but not more than 1297 mm,a width of 282 mm or more, but not more than 772 mm,a height of 792 mm or more, but not more than 839 mm,a weight of 253 kg or more, but not more than 293 kg,power of 22 kWh or 26 kWh, andconstituted of 24 or 48 modules0 %—31.12.2017
ex8507600055Lithium-ion accumulator or module in cylindrical form, with:a base similar to an ellipse squeezed in the middle,a length of 49 mm or more (not including terminals),a width of 33,5 mm or more,a thickness of 9,9 mm or more,a rated capacity of 1,75 Ah or more, anda rated voltage of 3,7 V,for the manufacture of rechargeable batteries0 %—31.12.2017
ex8507600057Lithium-ion accumulator or module, cuboid in shape, with:some of the corners rounded off,a length of 76 mm or more (not including terminals),a width of 54,5 mm or more,a thickness of 5,2 mm or more,a rated capacity of 3100 mAh or more, anda rated voltage of 3,7 V,for the manufacture of rechargeable batteries0 %—31.12.2017
ex8507600050Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 408 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 138 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda power of 458 Wh or more, but not more than 2158 Wh0 %—31.12.2022
ex8507600053Batteries of lithium-ion electric accumulators or rechargeable module:a length of 1203 mm or more, but not more than 1297 mm,a width of 282 mm or more, but not more than 772 mm,a height of 792 mm or more, but not more than 839 mm,a weight of 253 kg or more, but not more than 293 kg,power of 22 kWh or 26 kWh, andconstituted of 24 or 48 modules0 %—31.12.2022
ex8507600060Lithium-ion rechargeable batteries, with:a length of 1213 mm or more, but not more than 1575 mm,a width of 245 mm or more but not more than 1200 mm,a height of 265 mm or more, but not more than 755 mm,a weight of 265 kg or more but not more than 294 kg,a nominal capacity of 66,6 Ah,put up in packs of 48 modules0 %—31.12.2020
ex8507600065Cylindrical lithium ion cell with3,5 VDC to 3,8 VDC,300 mAh to 900 mAh anda diameter of 10,0 mm to 14,5 mm0 %—31.12.2021
ex8507600071Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mma width of 935 mm or more, but not more than 1660 mma height of 85 mm or more, but not more than 700 mma weight of 250 kgor more, but not more than 700 kga power of not more than 175 kWh0 %—31.12.2021
ex8507600075Rectangular lithium-ion-accumulator, witha metal casing,a length of 173 mm (± 0,15 mm),a width of 21 mm (± 0,1 mm),a height of 91 mm (± 0,15 mm),a nominal voltage of 3,3 V and,a nominal capacity of 21 Ah or more0 %—31.12.2021
ex8507600080Rectangular lithium-ion-accumulator or module, witha metal casing,a length of 171 mm (± 3 mm),a width of 45,5 mm (± 1 mm),a height of 115 mm (± 1 mm),a nominal voltage of 3,75 V anda nominal capacity of 50 Ahfor use in the manufacture of rechargeable batteries for motor vehicles0 %—31.12.2020
ex8507600085Rectangular modules for incorporation in lithium-ion rechargeable batteries:of a length of 312 mm or more, but not more than 350 mmof a width of 79,8 mm or more, but not more than 225 mmof a height of 35 mm or more, but not more than 168 mmof a weight of 3,95 kg or more, but not more than 8,56 kgwith a rating of 66,6 Ah or more, but not more than 129 Ah0 %—31.12.2020
ex8507908070Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (± 0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric vehicle batteries0 %p/st31.12.2021
ex8507908070Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (± 0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric rechargeable batteries0 %p/st31.12.2021
ex85087000ex853710981096Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W0 %p/st31.12.2020
ex85087000ex853710982098Electronic circuit cards that:are connected by wire or radio frequency to each other and the motor controller card, andregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)0 %p/st31.12.2020
ex8511300030Igniter integrated coil assembly with:an igniter,a coil on plug assembly with an integrated mounting bracket,a housing,a length of 90 mm or more but not more than 200 mm (+/– 5 mm),an operating temperature of – 40 °C or more but not more than 130 °C,a voltage of 10,5 V or more, but not more than 16 V0 %p/st31.12.2019
ex8511300050Ignition coil:with a length of 50 mm or more, but not more than 200 mm,with an operating temperature of – 40 °C or more, but not more than 140 °C, andwith a voltage of 9 V or more, but not more than 16 V,with or without connection cable,for use in the manufacture of motor vehicles of Chapter 870 %—31.12.2021
ex8511300055Ignition coil:with a length of 50 mm or more, but not more than 200 mm,with an operating temperature of – 40 °C or more, but not more than 140 °C, andwith a voltage of 9 V or more, but not more than 16 V,with or without connection cable,for use in the manufacture of engines of motor vehicles0 %—31.12.2021
ex8511800020Glow-plug for pre-heating of the diesel engines with:an operating temperature of more than 800 °C,a voltage of 5 V or more, but not more than 16 V,a heating rod containing silicon nitride (Si3N4) and molybdenum disilicide (MoSi2), anda metal housingfor use in the manufacture of diesel engines of motor vehicles0 %—31.12.2021
ex8512200020Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 870 %p/st31.12.2019
ex8512200030Lighting module, containing at least:two LEDs,glass or plastic lenses, focusing/scattering the light emitted by the LEDs,reflectors redirecting the light emitted by the LEDs,in an aluminium housing with a radiator, mounted at a bracket with an actuator0 %p/st31.12.2020
ex8512200040Fog lamp with a galvanised inner surface, containing:a plastic holder with three or more brackets,one or more 12 V bulbs,a connector,a plastic cover,whether or not with a connection cablefor use in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8512309010Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:coil,magnet,metal membrane,connector,holderof a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8512309020Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holderof a kind used in the manufacture of goods of chapter 870 %p/st31.12.2020
ex85124000ex851680201020Car door mirror heating foil:with two electrical contacts,with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),with a protective paper film on0—31.12.2018
ex85142080ex85165000ex85166080101010Cavity assembly comprising at least:a transformer with an input of not more than 240 V and an output of not more than 3000 Wan AC or DC fan motor with an output of not more than 42 wattsa housing made of stainless steelwith or without a magnetron of a microwave output power of not more than 900 Wfor use in the manufacture of built-in products of headings 8514 2080, 8516 5000 and 8516 60800 %p/st31.12.2019
ex8516900060Ventilation sub-assembly of an electric deep-fat fryer:fitted with a motor having a power rating of 8 W at 4600 rpm,governed by an electronic circuit,operating at ambient temperatures above 110 °C,fitted with a thermoregulator0 %p/st31.12.2019
ex8516900070Inner pot:containing side and central openings,of annealed aluminium,with a ceramic coating, heat resistant to more than 200 °Cfor use in the manufacture of an electric fryer0 %p/st31.12.2017
ex8516900070Inner pot:containing side and central openings,of annealed aluminium,with a ceramic coating, heat resistant to more than 200 °Cfor use in the manufacture of an electric fryer0 %p/st31.12.2022
ex8516900080Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 2080, 8516 5000 and 8516 60800 %p/st31.12.2019
ex8518299530Loudspeakers of:an impedance of 3 Ohm or more, but not more than 16 Ohm,a nominal power of 2 W or more, but not more than 20 W,with or without plastic bracket, andwith or without electric cable fitted with connectors,of a kind used for TV sets and video monitors manufacture as well as home entertainment systems0 %—31.12.2017
ex8518299530Loudspeakers of:an impedance of 3 Ohm or more, but not more than 16 Ohm,a nominal power of 2 W or more, but not more than 20 W,with or without plastic bracket, andwith or without electric cable fitted with connectors,of a kind used for TV sets and video monitors manufacture as well as home entertainment systems0 %—31.12.2022
ex8518299540Loudspeakerof an impedance of 1,5 Ohm or more, but not more than 10 Ohm,of a diameter of 25 mm or more but not more than 80 mm,with frequency range of 150 Hz to 20 kHz,with rated power of 5W or more, but not more than 40W,andwhether or not with electric cable with connector,whether or not with a bracketused in the manufacture of goods of Chapter 870 %—31.12.2021
ex8518309520Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm0 %p/st31.12.2018
ex8518408091Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality0 %—31.12.2019
ex8518408092Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits0 %—31.12.2020
ex8518408093Audio power amplifier with:an output power of 50 W,an operating voltage of more than 9 V but not more than 16 V,an electrical impedance of not more than 4 Ohm,a sensitivity of more than 80 dBin a metal housingfor use in the manufacture of motor vehicles0 %p/st31.12.2021
ex8518900030Magnet system consisting of:a steel coreplate, in the form of a disk on one side provided with a cylindera neodymium magnetan upper platea lower plateof a kind used in car loudspeakers0 %p/st31.12.2019
ex8518900035Metal plateof steel,perforated andmeasuring 60,30 mm (+ 0,00 mm/– 0,40 mm) × 15,5 mm (+ 0,00 mm/– 0,40 mm) × 4,40 mm (± 0,05 mm)for use in the manufacture of loudspeaker passive radiators0 %—31.12.2021
ex8518900040Loudspeaker cone, made from paper pulp or polypropylene, with accompanying dustcaps, of a kind used in car loudspeakers0 %p/st31.12.2019
ex8518900050Diaphragm for an electrodynamic speaker withan outside diameter of 25 mm or more but not more than 250 mm,a resonance frequency of 20 Hz or more but not more than 150 Hz,a total height of 5 mm or more but not more than 50 mm,an edge thickness of 0,1 mm or more but not more than 3 mm0 %p/st31.12.2019
ex8518900060Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the shape of a disk, whether or not containing a hole in the centre, of a kind used in car loudspeakers0 %—31.12.2020
ex8518900080Integrated car loudspeaker housing, consisting of:a speaker frame and magnet system holder with a protective coating andan embossed anti-dust cloth0 %p/st31.12.2019
ex8518900091Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers0 %p/st31.12.2018
ex8521900020Digital video recorder:without a hard disk drive,with or without a DVD-RW drive,with either motion detection or capability of motion detection through IP connectivity via LAN connectorwith or without a USB serial port,for use in the manufacture of closed-circuit television (CCTV) surveillance systems0 %—31.12.2019
ex8522904950Electronic assembly for a laser read-head of a compact disc player, comprising:a printed circuit,a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,not more than 3 connectors,not more than 1 transistor,not more than 3 variable and 4 fixed resistors,not more than 5 capacitors,the whole mounted on a support0 %p/st31.12.2018
ex85229049ex85279900ex85299065601025Printed circuit board assembly comprising:a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,a microprocessor capable of receiving remote control messages and controlling the tuner chipset,for use in the manufacture of home entertainment systems0 %p/st31.12.2019
ex85229049ex85279900ex85299065652040Printed circuit board subassembly, comprising:a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,a radio frequency (RF) remote control receiver,an infrared remote control signal transmitter,a SCART signal generatora TV state sensorfor use in the manufacture of home entertainment systems0 %p/st31.12.2019
ex8522904970Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit0 %p/st31.12.2018
ex8522908015Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 85210 %p/st31.12.2017
ex8522908030Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players0 %p/st31.12.2021
ex85229080ex852990923057Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players0 %p/st31.12.2021
ex8522908065Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording0 %p/st31.12.2018
ex8522908070Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 85210 %p/st31.12.2018
ex8522908075Optical reading head for CD player, consisting of one laser diode, one photo detector integrated circuit and one beam splitter0 %p/st31.12.2018
ex8522908080Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 85430 %p/st31.12.2018
ex8522908083Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:laser diodes operating at three different wavelengths,a photo detector integrated circuit andan actuator,for the manufacture of products falling within heading 85210 %p/st31.12.2018
ex8522908084Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:an optical pick up unit with laser diodes operating at three different wavelengths,a spindle motor,a stepping motor0 %p/st31.12.2018
ex8522908085Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 85210 %p/st31.12.2018
ex8522908096Hard disk drive, for incorporation in products of heading 85210 %p/st31.12.2017
ex8522908097Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 85210 %p/st31.12.2021
ex8525801920Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1024 × 1280 pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 851712000 %—31.12.2018
ex85258019ex852580913110Camera:of a weight of not more than 5,9 kg,without a housing,of dimensions of not more than 405 mm × 315 mm,with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor,with effective pixels of not more than 5 megapixels,for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks0 %—31.12.2018
ex8525801945Camera module with a resolution of 1280 720 P HD, with two microphones, for use in the manufacture of products of heading 85280 %—31.12.2017
ex8525801950Remote camera head, whether or not contained in a housingwith dimensions (without cable socket) of not more than 27 × 30 × 38,5 mm (width × height × length),with three MOS imaging sensors with two or more effective megapixels per sensor and a prism block for distribution of the RGB spectrum colours to the three sensors,with a C-Mount lens mount,with a weight of not more than 70 g,with an LVDS digital video output,with a permanent EEPROM memory for local storage of calibration data for colour rendering and defective pixel compensationfor use in the manufacture of miniaturised industrial camera systems0 %—31.12.2018
ex8525801955Camera module with a resolution of 1920 × 1080 P HD with two microphones for use in the manufacture of products falling within heading 85280 %—31.12.2018
ex8525801960Image scanning cameras, using:a "Dynamic"- or "Static overlay lines" system,an output NTSC video signal,a voltage of 6,5 V or more,an illuminance of 0,5 lux or more0 %—31.12.2019
ex8525801965Cameras using MIPI electrical interface with:an image sensor,an objective (lens),a colour processor,a flexible printed circuit board or a printed circuit board,whether or not capable of receiving audio signals,a module dimension of not more than 15 mm × 15 mm × 15 mm,a resolution of 2 mega pixel or more (16161232 pixels and higher),whether or not wired, anda housingfor use in the manufacture of products falling within subheading 85171200 or 847130000 %—31.12.2020
ex8525801970Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:a sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm,a resolution of up to 640 × 512 pixels,a weight of not more than 400 g,measurements of not more than 70 mm × 86 mm × 82 mm,whether or not in a housingwith automotive- qualified plug anda deviation of the output signal over the entire work temperature range of not more than 20 %0 %—31.12.2019
ex8526100020Radar sensor with control unit for autonomous emergency car braking system for use in manufacture of goods of Chapter 870 %—31.12.2021
ex8526912030Control unit of the emergency call system containing GSM and GPS module, for use in the manufacture of goods of Chapter 870 %—31.12.2019
ex8529906575Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels0 %p/st31.12.2022
ex85279199ex852990652085Assembly consisting of at least:an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,a transformer anda radio broadcast receiverfor use in the manufacture of consumer electronic products0 %—31.12.2019
ex8528490010Video monitor comprising:a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, anda printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus0 %—31.12.2018
ex8528590010Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less,without a housing, with back cover and mounting frame,or with a housing,used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 940 %—31.12.2018
ex8528590020Liquid crystal display colour video monitor assembly mounted on a frame,excluding those combined with other apparatus,comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,used for permanent incorporation or permanent mounting into entertainment systems for vehicles0 %—31.12.2019
ex8529108020Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing0 %p/st31.12.2018
ex8529108050Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing0 %p/st31.12.2018
ex8529108060Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing0 %p/st31.12.2018
ex8529108070Ceramic filterswith an applicable frequency range of 10 kHz or more but no more than 100 MHzwith a housing of ceramic plates provided with electrodesof a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment0 %p/st31.12.2019
ex8529906515Electronic assembly comprising at leasta printed circuitprocessors for multi-media applications and video signal processingFPGA (Field Programmable Gate Array)Flash memoryoperating memoryHDMI, VGA, USB and RJ-45 interfacessockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel0 %p/st31.12.2020
ex85299065ex854890903044Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing0 %p/st31.12.2018
ex8529906545Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 85270 %p/st31.12.2019
ex8529906550Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 85280 %p/st31.12.2021
ex8529906565Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module0 %p/st31.12.2020
ex85299065ex852990926553Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module0 %p/st31.12.2020
ex8529906575Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels0 %p/st31.12.2017
ex8529906580Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 85270 %—31.12.2019
ex85299092ex854890901560LCD modules,solely consisting of one or more TFT glass or plastic cells,not combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit andwith or without inverters0 %p/st31.12.2018
ex8529909225LCD modules, not combined with touch screen facilities, solely consisting of:one or more TFT glass or plastic cells,a die cast heat sink,a backlight unit,one printed circuit board with micro controller, andLVDS (Low Voltage Differential Signalling) interface,for use in the manufacture of radios for motor vehicles0 %p/st31.12.2020
ex8529909232Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 85280 %p/st31.12.2018
ex8529909235LCD modules with:a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,a LED backlight,a printed circuit board with EPROM, microcontroller, timing controller, LIN bus driver module and other active and passive components,an 8 pin plug for power supply and 4- pin LVDS interface,whether or not in a housing,for permanent incorporation or permanent mounting into motor vehicles of chapter 870 %—31.12.2020
ex8529909236LCD module with:a diagonal measurement of the screen of 14,5 cm or more but not more than 20,3 cm,or without a touch screen,an LED backlight,a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,a 12 pin plug for power supply and CAN and LVDS interfaces,in a housing with monitor and other control functions,for installation in motor vehicles of chapter 870 %—31.12.2020
ex8529909237Fastening and covering ledges of aluminium alloy containing:silicon and magnesium,with a length of 300 mm or more but not more than 2200 mm,specifically shaped for use in the manufacture of TV sets0 %—31.12.2020
ex8529909240Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors0 %p/st31.12.2018
ex8529909241Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors0 %p/st31.12.2018
ex8529909242Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 85280 %p/st31.12.2018
ex8529909243Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply0 %p/st31.12.2018
ex8529909245Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats0 %p/st31.12.2018
ex8529909247Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel0 %p/st31.12.2019
ex85299092ex853669904983AC socket with a noise filter, composed of:AC socket (for power cord connection) of 230 V,integrated noise filter composed of capacitors and inductors,cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,whether or not equipped with a metal support, which joins the AC socket to the PDP TV set0 %p/st31.12.2019
ex8529909250Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with backlight, micro-controller,with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,for use in the manufacture of vehicles of chapter 870 %p/st31.12.2020
ex8529909255OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities and one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors0 %p/st31.12.2019
ex8529909259LCD modules with:a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,a LED backlight,a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components,6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface,whether or not in a housing,for permanent incorporation or permanent mounting into motor vehicles of Chapter 870 %p/st31.12.2020
ex8529909263LCD modulewith a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,with or without a touch screen,with an LED backlight,with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,with a plug for power supply and CAN and LVDS interfaces,with or without electronic components for dynamic adjustments of colour,in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,suitable for installation in motor vehicles of Chapter 870 %p/st31.12.2020
ex8529909265OLED display consisting of:the organic layer with organic LEDs,two conductive layers on electron transfer and electron holes,layers of transistors (TFT) with resolution of 1920 × 1080anode and cathode for power supply of organic diodes,RGB filter,glass or plastic protective layer,without the electronics for pixel addressing,for use in the manufacture of goods of headings 85280 %p/st31.12.2019
ex8529909267Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with or without a touch screen,with backlight, micro-controller,with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,whether or not with haptic and acoustical feedback,for use in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
ex8529909270Rectangular fastening and covering frame:of an aluminium alloy containing silicon and magnesium,with a length of 500 mm or more but not more than 2200 mm,with a width of 300 mm or more but not more than 1500 mm,of a kind used for the production of TV sets0 %p/st31.12.2017
ex8529909270Rectangular fastening and covering frame:of an aluminium alloy containing silicon and magnesium,with a length of 500 mm or more but not more than 2200 mm,with a width of 300 mm or more but not more than 1500 mm,of a kind used for the production of TV sets0 %p/st31.12.2022
ex8529909285Colour LCD module in a housing:with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,without touch screen,with a backlight and micro-controller,with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,without a signal processing module,with control electronics for pixel addressing only,with a motorised mechanism for moving the display screen,for permanent installation in vehicles of Chapter 870 %p/st31.12.2020
ex8535900020Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back-light units for LCD modules0 %p/st31.12.2018
ex85359000ex853650803083Semiconductor module switch in a casing:consisting of an IGBT transistor chip and a diode chip on one or more lead frames,for a voltage of 600 V or 1200 V0 %p/st31.12.2020
ex8536303011Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing0 %p/st31.12.2018
ex8536411020Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less0 %—31.12.2021
ex8536419040A power relay with:an electromechanical switching function,a load current of 3 amperes or more but not exceeding 16 amperes,a coil voltage of 5 volts or more but not exceeding 24 volts,a distance between the connector pins of the load circuit not more than 12,5 mm0 %p/st31.12.2018
ex8536419050Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with one or two photovoltaic generators and two power MOSFET output switches in a casing with connections for a maximum voltage of 60 volts and a minimum current of 2 amps0 %—31.12.2021
ex8536490030Relays with:a nominal voltage of 12 V DCan allowable voltage of not more than 16 V DCa coil resistance at 20 °C of 26, 7 Ohm (± 10 %)a pick-up voltage at 60 °C of not more than 8,5 Va drop-out voltage at 20 °C of 1 V or morea nominal operating power at 20 °C of 5,4 Wattsa switching voltage of not more than 400 V DCa permanent current-carrying capacity of not more than 120 Afor use in the manufacture of batteries for electric vehicles0 %—31.12.2020
ex8536490040Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts0 %—31.12.2021
ex8536490091Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment0 %p/st31.12.2018
ex8536501131Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing0 %p/st31.12.2018
ex8536501132Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60 V and at a current strength of not more than 50mA, for use in the manufacture of products of headings 8521 or 85280 %p/st31.12.2018
ex8536501140Push-button switch for keyless start for a voltage of 12 V in a plastic housing, comprising at least:printed circuit board,LED diode,connector,brackets for mountingfor use in the manufacture of goods of Chapter 870 %—31.12.2021
ex8536501991Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections0 %p/st31.12.2018
ex85365019ex853650809397Devices, having adjustable controller and switching functions, comprising one or more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing0 %p/st31.12.2018
ex8536508081Mechanical speed governer switches for connecting electrical circuits, with:a voltage of 240 V or more but not more than 250 V,an amperage of 4 A or more but not more than 6 A,for use in the manufacture of machines falling within heading 84670 %p/st31.12.2019
ex8536508082Mechanical switches for connecting electrical circuits, with:a voltage of 240 V or more but not more than 300 V,an amperage of 3 A or more but not more than 15 A,for use in the manufacture of machines falling within heading 84670 %p/st31.12.2019
ex8536508093Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V0 %p/st31.12.2018
ex8536508098Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of products of headings 8521 or 85280 %p/st31.12.2018
ex8536699051SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 85280 %p/st31.12.2017
ex8536699051SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 85280 %p/st31.12.2022
ex8536699060Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors0 %p/st31.12.2020
ex8536699081Pitch connector for use in the manufacture of LCD television reception apparatus0 %p/st31.12.2017
ex8536699082Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:a pulse transformer, including a wide-band ferrite core,a common mode coil,a resistor,a capacitor,for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2019
ex8536699084Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2020
ex8536699085Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2021
ex8536699086High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2021
ex8536699088Secure Digital (SD), CompactFlash, "Smart Card" and "Common interface modules (cards)" female connectors and interfaces, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1000 V0 %p/st31.12.2017
ex8536699088Secure Digital (SD), CompactFlash, "Smart Card" and "Common interface modules (cards)" female connectors and interfaces, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1000 V0 %p/st31.12.2022
ex8536700010Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2021
ex85369040ex853690952020Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V0 %p/st31.12.2020
ex85369040ex853690959292Metallic stamped frame with connections0 %p/st31.12.2018
ex85369040ex85369095ex85444993949410Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %p/st31.12.2018
ex8536909520Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V0 %p/st31.12.2020
ex8536909530Rivet contactsof copperplated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken togetherwith a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm)0 %p/st31.12.2020
ex8536909540Rivet contactsof copperplated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken togetherwith a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm)whether or not gilded0 %p/st31.12.2020
ex8536909592Metallic stamped frame with connections0 %p/st31.12.2018
ex85369095ex854449939410Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %p/st31.12.2018
ex8537109130Data processing and evaluation vehicle dashboard control module, operating through the CAN — bus protocol, containing at least:microprocessor relays,a stepper motor,Electrically Erasable Programmable Read-Only (EEPROM) memory, andother passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors),with a voltage of 13,5 V0 %p/st31.12.2017
ex8537109150Fuse control module in a plastic housing with mounting brackets comprising:sockets with or without fuses,connecting ports,a printed circuit board with embedded microprocessor, micro switch and relayof a kind used in the manufacture of goods of chapter 870 %p/st31.12.2020
ex85371091ex853710986045Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:an AC power input of 208 V or more but not more than 400 V,a logic power input of 24 V DC,an automatic circuit breaker,a main power switch,internal or external electrical connectors and cables,in a housing with dimension of 281 mm × 180 mm × 75 mm or more, but not more than 630 mm × 420 mm × 230 mm,of a kind used for manufacturing recycling or sorting machines0 %p/st31.12.2018
ex8537109170Programmable memory controller for a voltage not exceeding 1000 V, of a kind used for the operation of a combustion motor and/or various actuators working with a combustion motor, comprising at leasta printed circuit with active and passive components,an aluminium housing, andmultiple connectors0 %—31.12.2022
85371095ex8537109892Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors0 %p/st31.12.2018
ex8537109830Motor bridge ICs without programmable memory consisting of:one or more integrated circuits, not interconnected, on separate lead frames,also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in carsmounted in a plastic housing0 %p/st31.12.2018
ex8537109835Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:2 rotary knobs27 or more pushbuttonsLED lights2 integrated circuits for receiving and sending of control signals via the LIN-bus0 %p/st31.12.2020
ex8537109840Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:a length of 50 mm or more, but not more than 120 mm,a width of 20 mm or more but not more than 40 mm,a height of 30 mm or more, but not more than 120 mmof a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8537109850Electronic control unit BCM (Body Control Module) comprisingplastic box with printed circuit board and metal holder,with voltage of 9 V or more, but not more than 16 V,able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminderof a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8537109860Electronic assembly consisting of:a microprocessor,light-emitting diode (LED) or liquid crystal display (LCD) indicators,electronic components mounted on a printed circuit,for use in the manufacture of built-in products of headings 85142080, 85165000 and 851660800 %p/st31.12.2019
ex8537109865Lever for control module under the steering wheel:with one or more single or multi-positional electrical switches (push-button, rotary or other),whether or not equipped with printed circuit boards and electrical cables,for a voltage of 9 V or more but not more than 16 V,of a kind used in the manufacture of motor vehicles of Chapter 870 %p/st31.12.2021
ex8537109875Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:an antenna,a connector,a metal holder,for use in the manufacture of goods of Chapter 87Â0 %p/st31.12.2021
ex8537109892Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors0 %p/st31.12.2018
ex8537109893Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems0 %p/st31.12.2018
ex85371098ex854370909420Unit consisting of two junction field effect transistors contained in a dual lead frame housing0 %p/st31.12.2018
ex85389091ex853890992050Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,a connection cable with a plug,at least two mounting bracketswhether or not PCB including integrated circuits, diodes and transistorsof a kind used in the manufacture of goods of CN heading 87030 %p/st31.12.2020
ex85389099ex854720003010Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint0 %p/st31.12.2019
ex8538909960Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 870 %p/st31.12.2021
ex8538909992Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 mm × 48 mm0 %p/st31.12.2018
ex8538909995Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1200 V0 %p/st31.12.2018
ex8540208091Photomultiplier0 %—31.12.2021
ex8540710020Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 851650000 %—31.12.2018
ex8540890091Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0 %—31.12.2018
ex8540890092Vacuum fluorescent display tube0 %—31.12.2018
ex8543709015Laminated electrochromic film consisting of:two outer layers of polyester,a middle layer of acrylic polymer and silicone, andtwo electric connection terminals0 %—31.12.2021
ex8543709030Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2018
ex8543709033High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021
ex8543709033High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021
ex8543709034Gallium nitride (GaN) high-frequency amplifier consisting of one or more discrete transistors, one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2021
ex8543709035Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2018
ex8543709045Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing0 %p/st31.12.2018
ex8543709055Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing0 %p/st31.12.2018
ex8543709060Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing0 %p/st31.12.2018
ex8543709065Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing0 %p/st31.12.2018
ex8543709080Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing0 %p/st31.12.2018
ex8543709085Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2018
ex8543709095Mobile telephone view and control module comprising of:a mains power/CAN (Controller area network) output socket,a universal serial bus (USB) and audio IN/OUT ports andincorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),for use in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
ex85442000ex85444290ex85444993102020PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),a distance between conductors of not more than 0,5 mm anda pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm0 %—31.12.2018
ex8544200020Antenna connecting cable for the transmission of analogue radio (AM/FM) and GPS signals, containing:a coaxial cable,two or more connectors,3 or more plastic clips for attachment to the dashboardof kind used in the manufacture of goods of Chapter 870 %—31.12.2021
ex8544200030Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:a coaxial cable,two or more connectors, and3 or more plastic clips for attachment to the dashboardof a kind used in the manufacture of goods of Chapter 870 %—31.12.2021
ex8544300030Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following;a travel speed of not more than 24 km/ha motor speed of not more than 4500 rpmhydraulic pressure of not more than 25 Mpamass of not more than 50 metric tonnesfor use in the manufacture of vehicles of heading 84270 %p/st31.12.2018
ex8544300035Wire harness:with an operation voltage of 12 V,wrapped in tape and covered in plastic convoluted tubing,with 16 or more strand, with all terminals to be tin plated or equipped with connectors,for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex8544300035Wire harness:with an operation voltage of 12 V,wrapped in tape or covered in plastic convoluted tubing,with 16 or more strands, with all terminals to be tin plated or equipped with connectors,for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex85443000ex854442904040Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box0 %p/st31.12.2019
ex85443000ex854442906050Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 870 %—31.12.2020
ex8544300070Multi-measurement wire harness:of a voltage of 5 V or more but not more than 90 V,capable of transmitting informationfor use in the manufacture of vehicles of heading 87110 %p/st31.12.2019
ex85443000ex854442908060Extension two-core cable with two connectors, containing at least:a rubber grommet,a plastic conduit,a metal attachment bracketof a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
ex85443000ex854442908565extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracketof a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
ex8544429010Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (± 0,25 V)connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,outer screening shielding,used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits0 %p/st31.12.2018
ex8544429030PET insulated electric conductor with:10 or 80 individual wires,a length of 50 mm or more, but not more than 800 mm,connector(s) and/or plug(s) fitted at one or both ends,for use in the manufacture of products falling within headings 8521 and 85280 %—31.12.2017
ex8544429070Electric conductors:of a voltage of not more than 80 V,with a length of not more than 120 cm,fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors0 %p/st31.12.2020
ex854442908012-wire connecting cable containing two connectorsof a voltage of 5 V,with a length of not more than 300 mmfor use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex8544499110Insulated copper electrical wires:with individual conductor wires of a diameter exceeding 0,51 mm.,for a voltage of not more than 1000 V,for use in the manufacture of automotive cable harnesses0 %m31.12.2019
ex8544499330Electric conductors:of a voltage of not more than 80 V,of a platinum-iridium-alloy,coated with poly(tetrafluoroethylene),without connectors,for use in the manufacture of hearing aids, implants and speech processors0 %m31.12.2020
ex8545190020Carbon electrodes, for use in the manufacture of zinc-carbon batteries0 %p/st31.12.2018
ex8545909020Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes0 %—31.12.2020
ex8547100010Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters0 %p/st31.12.2018
ex8548102910Spent lithium-ion or nickel metal hydride electric accumulators0 %—31.12.2017
ex8548102910Spent lithium-ion or nickel metal hydride electric accumulators0 %—31.12.2018
ex8548909041Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing0 %p/st31.12.2018
ex8548909043Contact image sensor0 %p/st31.12.2018
ex8548909048Optical unit, containing at leasta laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nman optical lensa "Recording Photodetector Integrated Circuit" (PDIC)a focussing and tracking actuator0 %p/st31.12.2021
ex8548909050Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 85280 %p/st31.12.2017
ex8548909065LCD modules,solely consisting of one or more TFT glass or plastic cells,combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit andwith or without inverters0 %p/st31.12.2018
ex8704239120Motor chassis with a self-ignition capacity of at least 8000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm0 %—31.12.2017
ex87081010ex870810901010Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex8708301020Motor powered brake actuation unitwith a rating of 13.5 V (± 0,5 V) anda ball screw mechanism to control brake fluid pressure in the master cylinderfor use in the manufacture of electric motor vehicles0 %p/st31.12.2019
ex87083010ex87083091ex87083099206010Motor powered brake actuation unitwith a rating of 13,5 V (± 0,5 V) anda ball screw mechanism to control brake fluid pressure in the master cylinderfor use in the manufacture of electric motor vehicles0 %p/st31.12.2019
ex87083010ex870830914030Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex87083010ex870830915010Drum type parking brake:operating within the service brake disk,with a diameter of 170 mm or more but not more than 195 mmfor use in the manufacture of motor vehicles0 %p/st31.12.2021
ex87083010ex870830916020Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex87083010ex870830917040Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex87083010ex870830913050Brake unit assembly, whether or not equipped with an electronic parking brake, comprising at least:a piston,brake pads,a gasket, anda venting valvefor use in the manufacture of goods of Chapter 870 %—31.12.2021
ex8708309110Drum type parking brake:operating within the service brake disk,with a diameter of 170 mm or more but not more than 195 mmfor use in the manufacture of motor vehicles0 %p/st31.12.2021
ex8708309120Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8708309130Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8708309140Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex87084020ex870840501020Gear box assembly with one or two inputs and three outputs in cast aluminum housing with overall dimensions of not more than 445 mm (width) × 462 mm (height), 680 mm length, equipped with:one exterior-splined output shaft,two interior-splined, coaxial output shafts,a rotary switch to indicate gear position, andthe potential for a differential to be incorporated between the 2 coaxial output shafts,for use in the manufacture of all-terrain vehicles or utility task vehicles0 %—31.12.2021
ex87084020ex870840502010Automatic hydrodynamic gearbox with a hydraulic torque converter without transfer box, cardan shaft and front differential for use in the manufacture of motor vehicles of Chapter 870 %p/st31.12.2020
ex87084020ex870840502010Automatic hydrodynamic gearboxwith a hydraulic torque converter,without transfer box and cardan shaft,whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 870 %p/st31.12.2020
ex8708402030Automatic gearbox with a hydraulic torque converter with:at least eight gears,an engine torque of 300 Nm or more, andtransverse or longitudinal installationfor use in the manufacture of motor vehicles of heading 87030 %—31.12.2022
ex87084020ex870840504030Gear box assembly with one or two inputs and at least three outputs in cast aluminium housing with overall dimensions (excluding the shafts) of not more than 455 mm (width) × 462 mm (height), 680 mm length, equipped with at least:one exterior-splined output shaft,a rotary switch to indicate gear position,the potential for a differentialfor use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex87085020ex870850551010Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 87030 %p/st31.12.2020
ex87085020ex870850992010Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middleof a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg0 %p/st31.12.2020
ex87085020ex87085099ex87089910ex8708999730202070Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) — 131 mm (height) — 187 mm (length), comprising at least:two electro-magnetic one direction clutches, working in opposite sides,an input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, anda coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth splinefor use in the manufacture of all-terrain vehicles or utility task vehicles0 %—31.12.2021
ex87085020ex87085099ex87089910ex8708999740307080Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148 mm (± 1 mm) × 213 mm (± 1 mm) × 273 mm (± 1 mm) comprising at least:two electro-magnetic one direction clutches in one cage, working in both directions,an input shaft with outer diameter of 24 mm (± 1 mm), ended with spline of 22,a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 mm, ended with spline of 22 teeth or more but not more than 28 teethfor use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex8708505510Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 87030 %p/st31.12.2020
ex8708509910Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middleof a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg0 %p/st31.12.2020
ex87085099ex87089910ex87089997202070Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least:two electro-magnetic one direction clutches, working in opposite sides,an input shaft with an outer diameter of 24 mm (+/– 1 mm), ended with 22 teeth spline, anda coaxial output bushing with an inner diameter of 22 mm (+/– 1 mm), ended with 22 teeth splinefor use in the manufacture of all-terrain vehicles or utility task vehicles0 %—31.12.2021
ex87088020ex870880351010Upper strut insulator containinga metal holder with three mounting screws, anda rubber bumpof a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex87088020ex870880912010Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex87088020ex870880913020Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex8708803510Upper strut insulator containinga metal holder with three mounting screws, anda rubber bumpof a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex8708809110Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex8708809120Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex8708809910Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex87089120ex870891352010Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex87089120ex870891993030Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:an insulating area flatness of not more than 0,1Â mm,a permissible particle quantity of 0,3Â mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4Â mm, andnot more than 3 pores larger than 0,2Â mmof a kind used in heat exchangers for car cooling systems0 %p/st31.12.2020
ex8708913510Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8708919930Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:an insulating area flatness of not more than 0,1 mm,a permissible particle quantity of 0,3 mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4 mm, andnot more than 3 pores larger than 0,2 mmof a kind used in heat exchangers for car cooling systems0 %p/st31.12.2020
ex87089310ex870893901010Mechanically operated clutch for use with an elastomeric belt in a dry environment in a CVT (Continuously Variable Transmission) gear case:designed to be bolted onto a splined shaft of outer diameter 23 mm,with an overall diameter of not more than 266 mm (± 1 mm),comprised of 2 sheaves with tapered faces,sheaves having taper of 13 degrees each,having a main compression spring used to resist displacement between sheaves, andcomprised of a cam or spring to maintain proper belt tensionfor use in the manufacture of all-terrain vehicles or utility task vehicles0 %—31.12.2021
ex87089310ex870893902020Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with:elements that activate the clutch at given rotation and generate (in this way) centrifugal force,shaft ended with five degree taper,three weights, andone compression springfor use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex87089310ex870893903030Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with:elements that activate the clutch at given rotation and generate (in this way) centrifugal force,shaft ended with 5 or more but not more than 6 degree taper,3 weights, and1 compression springfor use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex87089420ex870894351020Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex8708943520Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex87089510ex870895991020Inflatable safety cushion of high strength polyamide fibresewnfolded into three-dimensional packing form, fixed by thermal forming0 %p/st31.12.2020
ex87089510ex870895992030Inflatable safety cushion of high strength polyamide fibre:sewn,folded,with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealingsuitable for cool inflator technology0 %p/st31.12.2020
ex87089510ex870895994010Front passenger airbag composed of:a metal housing with at least six mounting brackets,an embedded safety cushion,a cartridge filled with compressed gasof a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex8708959910Front passenger airbag composed of:a metal housing with at least six mounting brackets,an embedded safety cushion,a cartridge filled with compressed gasof a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2020
ex87089910ex870899971060Six-layer composite fuel tank assembly comprising of:a fuel inlet,a pump flange assembly (PFA),a ventilation with rollover valve mounted on the top of the tank, andthreated holes for PFA assembly,for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2021
ex87089910ex870899973015Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex87089910ex870899974025Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 870 %p/st31.12.2021
ex8708999785Electroplated interior or exterior parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,layers of copper, nickel and chromiumfor use in the manufacturing of parts for motor vehicles of heading 8701 to 87050 %p/st31.12.2022
ex8714109010Inner tubes,of SAE1541 carbon steelwith a hard chromium layer of 20 μm (+ 15 μm/– 5 μm)having a wall thickness of 1,45 mm or more, but not more than 1,5 mmhaving an elongation at break of 15 %perforatedof a kind used for the production of motorcycle fork rods0 %p/st31.12.2020
ex8714109020Radiators of a kind used in motor bikes for fitting of attachments0 %p/st31.12.2020
ex8714109050Suspension damper tubesof 7050-t73 aluminium alloy,anodised on the inner surface,with a mean roughness (Ra) of the inner surface of not more than 0,4 anda maximum roughness height (Rt) of the inner surface of not more than 4,00 %—31.12.2021
ex87149110ex87149110ex87149110233370Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles0 %—31.12.2018
ex87149130ex87149130ex87149130243471Front forks with aluminium legs, for use in the manufacture of bicycles0 %—31.12.2018
ex87149130ex87149130ex87149130253572Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles0 %—31.12.2018
ex8714961010Pedals, for use in the manufacture of bicycles0 %—31.12.2020
ex8714999030Seat posts, for use in the manufacture of bicycles0 %p/st31.12.2020
ex9001109010Image reverser made up from an assembly of optical fibres0 %—31.12.2018
ex9001109030Polymer optical fibre with:a poly(methyl methacrylate) core,a cladding of fluorinated polymer,a diameter of not more than 3,0 mm, anda length of more than 150 m,of a kind used in the manufacture of polymer fibre cables0 %—31.12.2021
ex90011090ex900190004018Fibre optic plates:uncoated and unpainted,of a length of 30 mm or more, but not more than 234,5 mm,of a width of 7 mm or more, but not more than 28 mm, andof a height of 0,5 mm or more, but not more than 3 mmof a kind used in dental x-ray systems0 %—31.12.2021
ex9001200010Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2017
ex9001200010Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2022
ex90012000ex900190002055Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut0 %—31.12.2018
ex90015041ex900150493030Round organic uncut corrective eyeglass lens blanks, finished on both sides:of a diameter of 4,9 cm or more but not more than 8,2 cm,of a height of 0,5 cm or more but not more than 1,8 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface centreof a kind used to be processed in order to be adapted to a pair of glasses1,45 %—31.12.2021
ex90015041ex900150494040Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses0 %—31.12.2022
ex9001508030Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses0 %—31.12.2021
ex9001900025Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material0 %—31.12.2017
ex9001900025Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material0 %—31.12.2018
ex9001900035Rear projection screen, comprising a lenticular plastic plate0 %p/st31.12.2018
ex9001900045Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends0 %p/st31.12.2018
ex9001900060Reflector or diffuser sheets in rolls0 %—31.12.2018
ex9001900065Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens0 %—31.12.2019
ex9001900070Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90o and a prism pitch of 50 μm0 %—31.12.2021
ex9001900075Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules0 %p/st31.12.2017
ex9001900085Light guide panel made of poly(methyl methacrylate):whether or not cut,whether or not printed,for use in the manufacture of backlight units for flat screen TVs0 %—31.12.2020
ex9002110010Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors0 %—31.12.2018
ex90021100ex900219001510Infrared lens with motorised focus adjustment,using wavelengths of 3 μm or more but not more than 5 μm,providing a clear picture from 50 m to infinity,with fields of vision sizes of 3° × 2,25° and 9° × 6,75°,with a weight of not more than 230 g,with a length of not more than 88 mm,with a diameter of not more than 46 mm,athermalised,for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes0 %—31.12.2020
ex9002110020Lensesmeasuring not more than 80 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times,of a kind used for the production of visualizers or live image cameras0 %—31.12.2017
ex9002110020Lensesmeasuring not more than 80 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times,of a kind used for the production of visualizers or live image cameras0 %—31.12.2022
ex90021100ex900219002520Infrared optical unit composed ofa monocrystalline silicon lens with a diameter of 84 mm (± 0,1 mm) anda monocrystalline germanium lens with a diameter of 62 mm (± 0,05 mm)assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras0 %—31.12.2021
ex9002110030Lensesmeasuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,with a resolution of 130 lines/mm or better, andwith a zoom ratio of 18 timesof a kind used for the production of visualizers or live image cameras0 %—31.12.2017
ex90021100ex900219003530Infrared optical unit composed ofa silicon lens with a diameter of 29 mm (± 0,05 mm) anda monocrystalline calcium fluoride lens with a diameter of 26 mm (± 0,05 mm),assembled on a machined aluminum alloy support, of kind a used for thermal imaging cameras0 %—31.12.2021
ex9002110040Lensesmeasuring not more than 125 mm × 65 mm × 65 mm,with a resolution of 125 lines/mm or better, andwith a zoom ratio of 16 timesof a kind used for the production of visualizers or live image cameras0 %—31.12.2017
ex9002110040Lensesmeasuring not more than 125 mm × 65 mm × 65 mm,with a resolution of 125 lines/mm or better, andwith a zoom ratio of 16 timesof a kind used for the production of visualizers or live image cameras0 %—31.12.2018
ex90021100ex900219004540Infrared optical unitwith a silicon lens of a diameter of 62 mm (± 0,05 mm),mounted on a machined aluminum alloy supportof a kind used for thermal cameras0 %—31.12.2021
ex9002110050Lens unit:having a focal length of 25 mm or more but not more than 150 mm,consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm0 %—31.12.2018
ex90021100ex900219005550Infrared optical unit composed ofa germanium lens with a diameter of 11 mm (± 0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 14 mm (± 0,05 mm), anda silicon lens with a diameter of 17 mm (± 0,05 mm),assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras0 %—31.12.2021
ex90021100ex900219006560Infrared optical unitwith a silicon lens with a diameter of 26 mm (± 0,1 mm),mounted on a machined aluminum alloy support,of a kind used for thermal imaging cameras0 %—31.12.2021
ex9002110070Lensesmeasuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,with an etendue of 7 steradian mm2 or better, andwith a zoom ratio of 16 timesof a kind used for the production of visualizers or live image cameras0 %—31.12.2017
ex90021100ex900219007570Infrared optical unit composed ofa germanium lens with a diameter of 19 mm (± 0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 18 mm (± 0,05 mm),a germanium lens with a diameter of 20,6 mm (± 0,05 mm),assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras0 %—31.12.2021
ex9002110080Lens assembly with:a field of view range of 58,5 deg or more, but not more than 194 deg,a focal length of 1,16 mm or more, but not more than 3,88 mm,a relative aperture of F/2.0 or more but not more than 2.6,a diameter of 17 mm or more but not more than 18,5 mm,for use in the manufacture of CMOS automotive cameras0 %—31.12.2019
ex9002110085Lens assembly with:a horizontal field of view range of 50 deg or more, but not more than 200 deg,a focal length of 1,16 mm or more, but not more than 5,45 mm,a relative aperture of F/2,0 or more but not more than F/2,6, anda diameter of 5 mm or more but not more than 18,5 mm,for use in the manufacture of CMOS automotive cameras0 %—31.12.2019
ex9002200010Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 85280 %—31.12.2018
ex9002900020Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras0 %p/st31.12.2018
ex9002900030Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates0 %p/st31.12.2018
ex9002900040Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material0 %p/st31.12.2017
ex9002900040Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material0 %p/st31.12.2022
ex9013809010Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor materialof a kind used for incorporation into products of Chapters 84-90 and 950 %p/st31.12.2019
ex9013809020Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor materialof a kind used for incorporation into products of Chapters 84 to 90 and 950 %p/st31.12.2019
ex9014100030Electronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for fully automated printed circuit board (PCB) assembly, with the following main components:a combination of one or more application-specific integrated circuits (ASIC) andone or more micro-electromechanical sensors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,of a kind used in the manufacture of products falling in chapters 84-90 and 940 %p/st31.12.2018
ex9025804030Electronic barometric semiconductor pressure sensor in a housing, mainly consisting ofa combination of one or more monolithic application-specific integrated circuits (ASIC) andat least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material0 %p/st31.12.2018
ex9025804050Electronic semiconductor sensor for measuring at least two of the following quantities:Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,of a kind used for incorporation into products of Chapters 84-90 and 950 %p/st31.12.2019
ex9027109010Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing0 %—31.12.2018
ex9029100030Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex90292031ex902990001020Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least:speed,engine revolutions,engine temperature,the fuel levelcommunicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2019
ex9032890020Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm0 %p/st31.12.2018
ex9032890030Electronic controller of electric power steering (EPS controller)0 %p/st31.12.2018
ex9032890040Digital valve controller for controlling liquids and gases0 %p/st31.12.2017
ex9032890040Digital valve controller for controlling liquids and gases0 %p/st31.12.2022
ex9032890050Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprisingan electronic mass flow regulator, suitable for receiving and sending of analogue and digital signalsfour pressure transducers,two or more pressure valves,electric interfaces andseveral connectors for gas linessuitable for in-situ plasma bonding processes or for multi frequency bond activating processes0 %—31.12.2021
ex9401908010Ratchet disk of a kind used in the manufacture of reclining car seats0 %p/st31.12.2020
ex9401908020Sidemember with a thickness of 0,8 mm or more but not more than 3,0 mm, used in the manufacture of reclining car seats0 %p/st31.12.2018
ex9401908030Steel bracket for mounting safety features seats with thickness of 1 mm or more but not more than 2,5 mm used in the manufacture of reclining car seats0 %p/st31.12.2018
ex9401908040Steel handles for controlling the seat adjustment mechanism used in the manufacture of reclining car seats0 %p/st31.12.2018
ex9401908060Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles0 %—31.12.2020
ex9405403510Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 85280 %p/st31.12.2018
ex9405403910Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a light engine of a series of 3 or more but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set0 %p/st31.12.2018
ex9405403920LED array of white silicone, containing:an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, anda flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor0 %p/st31.12.2018
ex95030075ex950300951010Plastic cable car scale models, whether or not with a motor, for printing0 %p/st31.12.2020
ex9607201010Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers0 %—31.12.2020
ex9607209010Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers0 %—31.12.2020
ex9608910010Non-fibrous plastic pen-tips with an internal canal0 %—31.12.2018
ex9608910020Felt tips and other porous-tips for markers, without internal canal0 %—31.12.2018
ex9612101010Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)0 %—31.12.2018
Loading ...