Article 1The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.

Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2024.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 25 June 2024.For the CouncilThe PresidentH. LahbibANNEXThe Annex to Regulation (EU) 2021/2278 is amended as follows:(1)the entries with the following serial numbers are deleted: 0.2543, 0.2930, 0.2932, 0.2990, 0.3534, 0.3559, 0.3564, 0.3577, 0.3580, 0.3611, 0.3618, 0.4644, 0.4645, 0.4757, 0.5263, 0.5818, 0.5920, 0.6109, 0.6241, 0.6242, 0.6244, 0.6259, 0.6263, 0.6347, 0.6370, 0.6476, 0.6563, 0.6564, 0.6634, 0.6769, 0.6774, 0.6857, 0.6874, 0.6893, 0.6934, 0.7121, 0.7259, 0.7456, 0.7598, 0.7649, 0.7704, 0.7788, 0.7975, 0.7994, 0.8176, 0.8178, 0.8462;(2)the following entries replace those entries that have the same serial numbers:

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.";

Serial Number	CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date envisaged for mandatory review
"0.4080	ex15179099	10	Vegetable and/or microbial oil, refined, containing by weight;25 % or more but not more than 70 % arachidonic acid, or12 % or more but not more than 65 % docosahexaenoic acid, andWhether or not:standardized with high oleic sunflower oil (HOSO),containing by weight 0,005 % or more, but not more than 0,1 % of antioxidants	0 %	—	31.12.2026
0.5110	ex28181091	20	Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:92 % or more, but less than 98,5 % of aluminium oxide,2 % (±1,5 %) of magnesium oxide,1 % (±0,6 %) of yttrium oxide, andeither 3 % (±2,2 %) of lanthanum oxide or2 % (±1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm	0 %	—	31.12.2025
0.8073	ex29121900	20	Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more for the production of perfume or pharmaceutical intermediaries	0 %	—	31.12.2025
0.8527	ex29333999	63	1-Methyl-4-piperidone (CAS RN 1445-73-4) with a purity by weight of 97 % or more	0 %	—	31.12.2028
0.5131	ex29336980	55	Terbutryn (ISO) (CAS RN 886-50-0) for use as a raw material for the production of technical preservatives, in other sectors than for pesticides	0 %	—	31.12.2025
0.8354	ex29337900	23	(S)-2-Amino-3-[(S)-2-oxopyrrolidin-3-yl]propanamide hydrochloride (CAS RN 2628280-48-6) with a purity by weight of 95 % or more	0 %	—	31.12.2027
0.8359	ex29339980	64	(1R,2S,5S)-3-[(S)-3,3-dimethyl-2-(2,2,2-trifluoroacetamido)butanoyl]-6,6-dimethyl-3-azabicyclo[3.1.0]hexane-2-carboxylic acid (CAS RN 2755812-45-2) with a purity by weight of 95 % or more	0 %	—	31.12.2027
0.7318	ex36035000	10	Igniters for gas generators with:an overall maximum length of 15,5 mm or more but not more than 29,4 mm, anda pin length of 6,4 mm or more but not more than 12,6 mm	0 %	—	31.12.2028
0.5727	ex38112100	29	Additive containing by weight:25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),30 % or more but not more than 65 % of mineral oils,for use in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2027
0.6435	ex38112100	48	Additives containing:overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) andby weight more than 25 % but not more than 50 % of mineral oils,having a total base number of more than 350, but not more than 450,for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2024
0.8366	ex38123990	85	Light stabilizer, reaction product of stearic acid methyl ester with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS RN 300711-92-6) with a purity of less than 90 % by weight	0 %	—	31.12.2027
0.4520	ex39206219	32	Transparent poly(ethylene terephthalate) film:having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 μm or more but not more than 80 μm, whether coated with an acrylic-based organic material or not,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin,with a light transmittance of more than 70 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm	0 %	—	31.12.2028
0.8291	ex39219055	70	Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with:a total thickness of 0,25 mm or more but not more than 0,40 mm,a total weight of 109 g/m2 or more but not more than 114 g/m2	0 %	m2	31.12.2026
0.8372	ex44111292	10	Fibreboard:with a thickness of 2,20 mm or more but not more than 2,80 mm,with a density of 0,95 g/cm3 or more,lacquered or coated with melamine foil on both sides, andwith dimensions of 1300 mm x 1100 mm or less	0 %	—	31.12.2027
0.8123	ex84798997	28	Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:electronic brake assistants,hydraulic unit driven by brushless electric motor,brake fluid reservoir,for use in the manufacture of hybrid passenger cars	0 %	—	31.12.2025
0.5577	ex85013100	50	DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 4V or more, but not more than 16 V,an output at 20 oC of 200 W or more, but not more than 750 W,a torque at 20 oC of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 oC of 600 rpm or more, but not more than 3100 rpm,with or without a pulley,with or without an electronic power steering sensor/controller	0 %	—	31.12.2027
0.5978	ex85013100ex85013200	5540	DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:an external diameter of 24,2 mm or more, but not more than 140 mm,a rated speed of 3300 rpm or more, but not more than 26200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of more than 37,5 W, but not more than 2400 W,a free load current of not more than 20,1 A,a maximum efficiency of 50 % or more	0 %	—	31.12.2024
0.4731	ex85013100	58	Permanently excited DC motor with:an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,a rated speed of not more than 25000 rpm,an output of 45 W or more but not more than 400 W, anda supply voltage of 9 V or more but not more than 50 V,whether or not a multiple-phase winding,whether or not with a drive disc,whether or not with a crankcase,whether or not with a fan,	0 %	—	31.12.2024
			whether or not with a cap assembly,whether or not with a sun gear,whether or not with a speed and rotational direction encoder,whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,whether or not with a mounting flangefor use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture
0.7029	ex85051110	20	Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,whether or not arched,whether or not with rounded corners or oblique sides,whether or not colour markedwhether or not coated or passivated with a surface treatment,whether or not consisting of segments bonded together and electrically insulated from one anotherwith:a length of 9 mm or more, but not more than 105 mm,a width of 5 mm or more, but not more than 105 mm,a thickness of 2 mm or more, but not more than 55 mmintended to become permanent magnet after magnetisation	0 %	—	31.12.2026
0.5584	ex85051110	23	Bars in the form of arched rectangles, containing alloy containing neodymium, with:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,whether or not coated or passivated with a surface treatment,intended to become permanent magnets after magnetisation	0 %	p/st	31.12.2027
0.7567	ex85051110	25	Permanent magnets, of an alloy of neodymium, cylindrical shaped:with a notch,with an internal threaded bore on one side,with a length of 97,5 mm or more, but not more than 225 mm,with a diameter of 19 mm or more, but not more than 25 mm,whether or not coated or passivated with a surface treatment	0 %	—	31.12.2024
0.5585	ex85051110	28	Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:with an external diameter of not more than 45 mm,with a height of not more than 45 mm,whether or not coated or passivated with a surface treatment,intended to become permanent magnets after magnetisation	0 %	p/st	31.12.2027
0.3740	ex85051110	30	Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:a rectangular or a trapezoidal cross-section,a length of not more than 140 mm,a width of not more than 90 mm anda thickness of not more than 55 mm,or in the shape of an arched rectangle with:a length of not more than 75 mm,a width of not more than 40 mm,a thickness of not more than 7 mm anda radius of curvature of more than 86 mm but not more than 241 mm,layers of nickel and copperor in the shape of a disc with:a diameter of not more than 90 mm,whether or not a hole in the centre	0 %	p/st	31.12.2024
0.5948	ex85051110	35	Article of an alloy of neodymium, in the shape of a disc, with:a diameter of not more than 90 mm,whether or not a hole in the centre,layers of copper, nickel and/or zinc,intended to become permanent magnets after magnetisation	0 %	—	31.12.2024
0.7789	ex85051910	20	Permanent magnet of agglomerated ferrite, in the shape of arched rectangles, whether or not coated or passivated with a surface treatment, with:a length of 16,8 mm or more, but not more than 110,2 mm,a width of 14,8 mm or more, but not more than 75,2 mm,a thickness of 4,8 mm or more, but not more than 13,2 mm,for use in the manufacture of electromotor rotors	0 %	—	31.12.2024
0.5937	ex85051990	30	Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with:a diameter of not more than 120 mm,a hole in the centre,intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT	0 %	—	31.12.2024
0.7299	ex85051990	45	Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with:a length of 26,85 mm or more but not more than 32,15 mm,a width of 7,6 mm or more but not more than 9,55 mm,a thickness of 5,3 mm or more but not more than 5,8 mm, anda weight of 6,1 g or more but not more than 8,3 g,intended to become a permanent magnet after magnetisation	0 %	p/st	31.12.2027
0.7511	ex85051990	60	Articles of agglomerated ferrite in the shape of arched rectangles,whether or not coated or passivated with a surface treatment,whether or not with rounded corners,with:a length of 9 mm or more but not more than 101 mm,a width of 9 mm or more but not more than 101 mm,a thickness of 1,85 mm or more but not more than 15,15 mm,intended to become permanent magnets after magnetisation	0 %	—	31.12.2024
0.7663	ex85076000	18	Lithium-ion polymer accumulator pack equipped with a battery management system and can-bus interface with:6 modules with 90 cells or more but not more than 192 cells,a nominal voltage of 280 V or more but not more than 400 V,a nominal capacity of 9,7 Ah or more but not more than 120 Ah,a charging voltage of 110 V or more but not more than 495 V, andin a metal casing with:a length of not more than 1723 mm,a width of not more than 1162,23 mm,a height of not more than 395 mm,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703	1,3 %	—	31.12.2024
0.8368	ex85076000	29	Lithium-ion rechargeable battery pack in a specific housing, suitable for use in digital still cameras, having:a length of 50 mm or more, but not more than 120 mm,a width of 35 mm or more, but not more than 80 mm,a height of 15 mm or more, but not more than 45 mm,a weight of 0,040 kg or more but not more than 0,085 kg; anda capacity of not more than 2200 mAh	1,3 %	—	31.12.2024
0.5548	ex85076000	38	Modules for the assembly of lithium-ion battery packs, with:a length of 298 mm or more, but not more than 500 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 75 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg,a power of 458 Wh or more, but not more than 3510 Wh, anda voltage of less than 45 V or more than 70 V	1,3 %	—	31.12.2024
0.8275	ex85076000	83	Modules for the assembly of ion lithium electric accumulators with:a length of 570 mm or more, but not more than 610 mm,a width of 210 mm or more, but not more than 240 mm,a height of 100 mm or more, but not more than 120 mm,a weight of 28 kg or more, but not more than 35 kg, anda capacity of not more than 2500 Ah and a nominal energy of less than 8,4 kW,for use in the manufacture of vehicles of subheadings 870360, 870370, 870380 and 870460	1,3 %	—	31.12.2024
0.8419	ex85079080	55	Top cap or housing made of aluminium or ferrous alloy or stainless steel:whether or not including parts made of aluminum and aluminum alloy,with or without sealing elements or other elements made of polymer material,with or without a "current interrupt device" and an "evacuation valve"with or without plastic socketswith an outer diameter of 17 mm or more, but not more than 18 mm,or rectangular with:length not greater than 450 mm,width not greater than 200 mm, andhight not greater than 150 mm,for use in the manufacture of lithium-ion batteries	1,3 %	—	31.12.2024
0.8507	ex87149990	50	Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles	0 %	p/st	31.12.2027

----------------------

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.";(3)the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.".

Serial Number	CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date envisaged for mandatory review
"0.8619	ex29053995	25	Pinacol (CAS RN 76-09-5) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8604	ex29122900	65	Terephthalaldehyde (CAS RN 623-27-8) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8623	ex29189990	58	2,4-D (ISO) (CAS RN 94-75-7) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8641	ex29209010	23	1,3,2-Dioxathiolane 2,2-dioxide (CAS RN 1072-53-3) with a purity by weight of 99 %, or more	3,2 %	—	31.12.2028
0.8621	ex29242970	34	Acetic acid—tert-butyl [(1-aminocyclohexyl)methyl]carbamate (1/1) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8611	ex29299000	60	(2S)-2-[[2-[2-[2-[2-[2-[2-[2-[2-[2-[2-(2-Azidoethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethylamino]-2-oxoethoxy]acetyl]amino]-N-[4-(hydroxymethyl)phenyl]-6-[[(4-methoxyphenyl)-diphenylmethyl]amino]hexanamide (CAS RN 1224601-12-0) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8640	ex29319000	43	Trimethylindium (CAS RN 3385-78-2) with a purity by weight of 99 % or more	0 %	—	31.12.2028
0.8649	ex29319000	48	4-Phenoxybenzeneboronic acid (CAS RN 51067-38-0) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8652	ex29319000	58	Trimethylgallium (CAS RN 1445-79-0) with a purity by weight of 99 % or more	0 %	—	31.12.2028
0.8615	ex29321900	15	2-Methylfuran (CAS RN 534-22-5) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8636	ex29321900	25	Methyl tetrahydro-2-furancarboxylate (CAS RN 37443-42-8) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8605	ex29321900	35	(2S,3S,4S,5R)-3-(3,4-Difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)tetrahydrofuran-2-yl-4-nitrobenzoate (CAS RN 2875066-49-0) with a purity by weight of 97 % or more	0 %	—	31.12.2028
0.8603	ex29331990	58	1H-Pyrazole (CAS RN 288-13-1) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8613	ex29331990	68	1-Methyl-1H-pyrazol-4-amine hydrochloride (CAS RN 127107-23-7) with a purity by weight of 95 % or more	0 %	—	31.12.2028
0.8639	ex29332990	43	2-Octyl-4,5-dihydro-1H-imidazole (CAS RN 10443-60-4) with a purity by weight of 95 % or more	0 %	—	31.12.2028
0.8637	ex29333999	53	5-Methyl-2-pyridylamine (CAS RN 1603-41-4) with a purity by weight of 99 % or more	0 %	—	31.12.2028
0.8618	ex29333999	56	2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl]methyl]sulfanyl]1H-benzimidazole (CAS RN 103577-40-8) with a purity by weight of 99 % or more	0 %	—	31.12.2028
0.8624	ex29333999	58	Tert-butyl N-[5-(trifluoromethyl)pyridin-3-yl]carbamate (CAS RN 1187055-61-3) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8656	ex29333999	66	(2S,4S)-4-Ethoxy-2-[4-(methoxycarbonyl)phenyl]piperidin-1-ium(2Z)-3-carboxyprop-2-enoate (CAS RN 2408761-21-5) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8612	ex29335995	51	(1R,5S)-8-Benzyl-3,8-diazabicyclo[3.2.1]octane; 4-(4-hydroxyphenyl)phenol (2:1) (CAS RN 2642049-87-2) with a purity by weight of 95 % or more	0 %	—	31.12.2028
0.8602	ex29335995	54	2-Chloro-4-methylpyrimidine (CAS RN 13036-57-2) with a purity by weight of 99 % or more	0 %	—	31.12.2028
0.8643	ex29339980	35	2-[6-Methyl-2-(4-methylphenyl)imidazo[1,2-a]pyridin-3-yl]acetic acid (CAS RN 189005-44-5) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8642	ex29349990	38	2-Chloro-9H-thioxanthen-9-one (CAS RN 86-39-5) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8601	ex29349990	50	Vutrisiran (INN) (CAS RN 1867157-35-4) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8606	ex29359090	41	Lenacapavir sodium (INNM) (CAS RN 2283356-12-5) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8635	ex29400000	70	Alpha-D-Mannopyranose, 6-acetate 2,3,4-tribenzoate 1-(2,2,2-trichloroethanimidate) (CAS RN 346441-49-4) with a purity by weight of 95 % or more	0 %	—	31.12.2028
0.8614	ex29420000	20	Dimethylamine—borane (1:1) (CAS RN 74-94-2) with a purity by weight of 98 % or more	0 %	—	31.12.2028
0.8678	ex32041700	28	Colourant C.I. Pigment Yellow 12 (CAS RN 6358–85-6) and preparations based thereon with a colourant C.I. Pigment Yellow 12 content of 21 % or more by weight	0 %	—	31.12.2028
0.8676	ex32073000	30	Silver paste, containing by weight:45 % or more, but not more than 90 % silver (CAS RN 7440-22-4) and59 % or more, but not more than 92 % of the total solids (including silver)for use as conductor in the production of solar cells	0 %	—	31.12.2028
0.8630	ex32073000	40	Aluminium paste, containing by weight:72 % or more but not more than 82 % aluminium (CAS RN 7429-90-5)with a viscosity of 10 or more, but not more than 100 Pa.s (Brookfield RVT, 14 Spindle, 20 rpm, 25 oC±0,5 oC)with an aluminium particle size of not more than 25 μmfor use in the production of solar cells	0 %	—	31.12.2028
0.8655	ex38112900	23	Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0)	0 %	—	31.12.2028
0.8644	ex38249992	71	Mixture containing by weight:49 % or more but not more than 51 % of ethylene carbonate (CAS RN 96-49-1), and49 % or more but not more than 51 % of 1,3-propanesultone (CAS RN 1120-71-4)	3,2 %	—	31.12.2028
0.8670	ex39100000	85	Two-component silicone, with a viscosity of the mixture of 3000 cps or more, but not more than 6000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels	0 %	—	31.12.2028
0.8667	ex39191080ex39199080	7848	Polytetrafluoroethylene film,with a thickness of 50 μm or more,with a width of 6,30 mm or more but not more than 740 mm,an elongation at break of not more than 200 %, andcoated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 μm	0 %	—	31.12.2028
0.8629	ex39199080	55	Black polyvinyl chloride film:with a gloss of more than 25 degrees according to ASTM D 2457,whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release linerfor use in the manufacture of die-cut films for interior and exterior surfaces of cars	0 %	—	31.12.2028
0.8664	ex39269097	22	Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with:a density of 20 kg/m3 or more, but not more than 40 kg/m3,a tensile strength of not less than 170 kPa,water absorption coefficient of not greater than 1 %,a length of 5 mm or more but not more than 300 mm,a height of 10 mm or more but not more than 400 mm,a depth of 5 mm or more but not more than 250 mm	0 %	—	31.12.2028
0.8646	ex40169952	10	Hanger of the exhaust muffler consisting of:a steel bracket with at least one mounting hole andsilent block,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2028
0.8666	ex68042100	30	Steel wire used for cropping and squaring semiconductors:covered with diamond grains of 5 μm or more but not more than 55 μm,with a wire diameter of 45 μm or more, but not more than 350 μma breaking strength of 11 N or more but not more than 170 N	0 %	—	31.12.2028
0.8663	ex70099100	10	Chrome-plated glass mirror with:a length of 155 mm or more, but not more than 158 mm,a height of 115 mm or more, but not more than 120 mm,a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5000 cd/m2 and a central luminescence greater than or equal to 7000 cd/m2,a heater foil, with a resistance of 1,1 kΩ or more, but not more than 1,35 kΩ,designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors	0 %	—	31.12.2028
0.8682	ex70099100	20	Aspherical, convex or flat chrome-plated glass, ready for framing:with a length of 140 mm or more but not more than 215 mm,with a height of 104 mm or more but not more than 138 mm,with curvature radius of 0 mm or more but not more than 1330 mm,with a reflectance of more than 40 %,for the manufacture of automotive mirrors	0 %	—	31.12.2028
0.8616	ex70199000	50	Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations	0 %	—	31.12.2028
0.8668	ex84029000	10	Pre-assembled process module unit of an ethane cracker unit, containing:a dilution steam generator system which produces steam from pretreated quench water for use as dilution steam in steam cracking furnaces,a condensate system that collects, filters and deaerates steam condensates, which are subsequently recycled as boiler feed water and further distributed within the cracker unit, anda flare system that collects, separates and vaporizes non-recyclable hydrocarbon containing releases from different equipment in a steam cracker, and transfers those towards flares	0 %	—	30.06.2025
0.8610	ex84099100	28	Carburetor with:2 mounting holes with a diameter of 31 mm,a choke bore diameter of 18 mm or more, but not more than 19,05 mmfor use in the manufacture of a two-stroke engine grass trimmer	0 %	—	31.12.2028
0.8651	ex84145925	50	Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air witha direct current operating voltage of more than 10 V but not more than 14 V, oran alternating current operating voltage of more than 185 V, but not more than 254 V,an operating temperature of - 40 oC or higher, but not higher than 70 oC,for use in the manufacture of heat pump tumble dryers and refrigerators or freezers	0 %	—	31.12.2028
0.8648	ex84145935	40	Electric blower for cooling the battery module:with an operating voltage of 9 VDC or more but not more than 16 VDC,with a centrifugal electric fan,with a connector,with a plastic case,with or without a control unit for the fan electric motor,for use in the production of rechargeable batteries for hybrid and electric vehicles	0 %	—	31.12.2028
0.8679	ex84178050	10	Pre-assembled process module unit of an ethane cracker unit, exceeding 29 meters in length, 35 meters in width and 66 meters in height and 5500 metric ton in weight, containing two steam-cracking non-electric furnaces for de-hydrogenation as a part of an ethane cracker plant consisting of a radiation section and a convection section to produce ethylene and propylene from ethane	0 %	—	30.06.2025
0.8669	ex84194000	10	Pre-assembled process module unit of an ethane cracker unit, containing:quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water,a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module),a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water,an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module),	0 %	—	30.06.2025
			a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), anda chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module)
0.8680	ex84195080	20	Pre-assembled process module unit of an ethane cracker unit, containing:an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor,pumps and a heat exchanger to deliver ethylene to an external pipeline, anda closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor	0 %	—	30.06.2025
0.8675	ex84198998	10	Pre-assembled process module unit of an ethane cracker unit, containing:equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected equipment containing:coolers,vapor-liquid separation drums, andpumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products,	0 %	—	30.06.2025
			equipment associated with an external caustic wash tower containing:caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas,a spent caustic pre-treatment system, containing separation drums, pumps and mixers,a heat exchanger for the pre-cooling of cracked gas, anda separation drum for the removal of water from cracker gas
0.8632	ex84679900	10	Pole hedge trimmer cutting elements:in the form of hedge trimmer attachment,with a knife length of 60 cm and teeth opening of 30 mm,with angle adjustment of the blade,with integrated single stage gearbox,with a magnesium cast body,for use in the manufacture of garden machinery and power tools	0 %	—	31.12.2028
0.8673	ex84798997	33	Pre-assembled process module unit of an ethane cracker unit, containing:various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums,a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream,a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit),associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, anda vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers	0 %	—	30.06.2025
0.8681	ex84798997	43	Pre-assembled process module unit of an ethane cracker unit, containing:a system for filtering and cooling of dried cracked gas,a deethanizer distillation column and associated equipment for C2-/C3+ separation,an acetylene hydrogenation system to remove acetylene within a C2 stream,a fuel gas drum that stores fuel gas for cracker furnaces, anda system to regenerate dryers in a cracker installation	0 %	—	30.06.2025
0.8626	ex84834023	20	Bevel gear:made of lightweight alloys and steel,built on straight or helical bevel gears,with an angle between the shafts of 30 degrees or more but not more than 90 degreeswith a gear 1:1,3 ratio or more but not more than 1:1,46,for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery	0 %	—	31.12.2028
0.8625	ex84834023	30	Bevel gear:made of lightweight alloys and steel,built on straight bevel gears,with an angle between the shafts of 24 degrees or more but not more than 35 degrees,for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery	0 %	—	31.12.2028
0.8609	ex85013100	48	Brushless DC electric motors:with a rated power of 240 W or more, but not more than 260 W,with a voltage of 36 V or higher, but not higher than 52 Vwith a torque of 20 Nm or more, but not more than 140 Nm,with a housing made of aluminum, aluminum alloy or plastic,with or without a built-in controller,with a communication function in the LIN or UART interface,weighing 1,5 kg or more, but not more than 5,0 kg,adapted for mounting in a bicycle framefor use in the manufacture of e-bikes	0 %	—	31.12.2028
0.8608	ex85013100	49	Brushless DC electric motors:with a rated power of 240 W or more, but not more than 260 W,with voltage of 36 V or higher, but not higher than 52 V,with torque of 30 Nm or more, but not more than 50 Nm,with communication function UART or CAN interface,with internal planetary gearbox with fixed or variable ratio,made by CNC machined casting,with housing made of aluminum,weighing 2,3 kg or more, but not more than 4,4 kg,adapted for mounting in the front or rear bicycle wheel	0 %	—	31.12.2028
0.8662	ex85030099	53	Pressure casted rotor cover of the cooling channel system in the electrical motor:of EN AC-47100-F aluminum,with a sealing cap of stainless steel,shot-blasted and machined,leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure,with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506),with a tensile strength of 240 N/mm2 or more,with a height of 50 mm or more, but not more than 55 mm,with a diameter of 109 mm or more, but not more than 112 mm,with a weight of 3,9 kg or more but not more than 4,2 kg	0 %	—	31.12.2028
0.8658	ex85030099	58	Pressure casted inner housing of a cooling channel system for an electrical motor:of EN AC-47100 aluminum,shot-blasted and machined,leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)with a tensile strength of 240 N/mm2 or more,with a height of 225 mm or more, but not more than 280 mm,with a diameter of 300 mm or more, but not more than 310 mm,with a weight of 3,8 kg or more, but not more than 4,9 kg	0 %	—	31.12.2028
0.8659	ex85030099	63	Pressure casted outer housing of an electrical motor:of EN AC-47100 aluminum,with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,shot-blasted and machined,a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)with a tensile strength of 240 N/mm2 or more,with a height of 245 mm or more, but not more than 360 mm,with a width of 360 mm or more, but not more than 525 mm,with a length of 345 mm or more, but not more than 450 mm,with a weight of 6,4 kg or more, but not more than 8,3 kg	0 %	—	31.12.2028
0.8627	ex85052000	40	Electromagnetic clutch:transmitting torque from the motor shaft to the cutting device pulley,containing field coil, rotor, hub and armature,with an operating voltage of 12 Va current of 3,93 A current or more but not more than 6,86 A,a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 oC),a static torque of 108 Nm or more but not more than 305 Nmfor use in the manufacture of rider type self-propelled mowers	0 %	—	31.12.2028
0.8660	ex85076000	26	Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with:a length of 820 mm or more, but not more than 882 mm,a width of 390 mm or more, but not more than 655 mm,a height of 110 mm or more, but not more than 137 mm,a weight of 60 kg or more, but not more than 165 kg, anda power of 11300 Wh or more, but not more than 29360 Wh	1,3 %	—	31.12.2028
0.8645	ex85076000	28	Lithium-ion rechargeable battery cell with:a length of 190 mm or more but not more than 380 mm,a width of 90 mm or more but not more than 150 mm,a height of 4 mm or more but not more than 15 mm,a weight of 0,1 kg or more but not more than 1,2 kg,a nominal voltage of 3,0 VDC or more but not more than 4,0 VDC,a nominal capacity of not more than 90 Ah,for use in the manufacture of rechargeable hybrid and electric vehicle batteries	1,3 %	—	31.12.2028
0.8654	ex85076000	36	Lithium-ion accumulator, withmultiple connected lithium-ion accumulator cells,charging and monitoring electronics,a power of 74 Wh or more, but not more than 75 Wh,in a plastic housing with electrical connection contacts and LCD display,for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor	1,3 %	—	31.12.2028
0.8628	ex85118000	30	Ignition module:made with plastics and non-ferrous metals,with the electric components cast in epoxy resin,to generate the ignition energy and to electronically control the ignition timing,to connect spark plug and circuit breaker,for use in the manufacture of two-stroke engines	0 %	—	31.12.2028
0.8633	ex85122000	25	An electrical component with an integrated LED, in an ABS housing, with:a voltage of 11 V or more, but not more than 15 V,a circular shape,2 terminals,an outer diameter of the housing of 42,3 mm,a diode voltage of 42 V or more, but not more than 48 V anda current of 55 mA or more, but not more than 65 mA	0 %	—	31.12.2028
0.8647	ex85443000	75	Wiring harness to connect the integrated battery system with the car’s control systems, containing:an input waterproof connector,four or more output connectors,two or more plastic clips for attachmentfor use in the production of rechargeable batteries for hybrid and electric vehicles	0 %	—	31.12.2028

----------------------

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.".

Amendments and corrections
July 5, 2024	Entry into force - Date pub. +1 See Art 2
July 1, 2024	Application - See Art 2

Council Regulation (EU) 2024/1851 of 25 June 2024 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products