| Serial Number | CN code | TARIC | Description | Rate of autonomous duty | Supplementary Unit | Date envisaged for mandatory review |
|---|
| "0.8619 | ex29053995 | 25 | Pinacol (CAS RN 76-09-5) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8604 | ex29122900 | 65 | Terephthalaldehyde (CAS RN 623-27-8) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8623 | ex29189990 | 58 | 2,4-D (ISO) (CAS RN 94-75-7) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8641 | ex29209010 | 23 | 1,3,2-Dioxathiolane 2,2-dioxide (CAS RN 1072-53-3) with a purity by weight of 99 %, or more | 3,2 % | — | 31.12.2028 |
| 0.8621 | ex29242970 | 34 | Acetic acid—tert-butyl [(1-aminocyclohexyl)methyl]carbamate (1/1) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8611 | ex29299000 | 60 | (2S)-2-[[2-[2-[2-[2-[2-[2-[2-[2-[2-[2-(2-Azidoethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethylamino]-2-oxoethoxy]acetyl]amino]-N-[4-(hydroxymethyl)phenyl]-6-[[(4-methoxyphenyl)-diphenylmethyl]amino]hexanamide (CAS RN 1224601-12-0) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8640 | ex29319000 | 43 | Trimethylindium (CAS RN 3385-78-2) with a purity by weight of 99 % or more | 0 % | — | 31.12.2028 |
| 0.8649 | ex29319000 | 48 | 4-Phenoxybenzeneboronic acid (CAS RN 51067-38-0) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8652 | ex29319000 | 58 | Trimethylgallium (CAS RN 1445-79-0) with a purity by weight of 99 % or more | 0 % | — | 31.12.2028 |
| 0.8615 | ex29321900 | 15 | 2-Methylfuran (CAS RN 534-22-5) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8636 | ex29321900 | 25 | Methyl tetrahydro-2-furancarboxylate (CAS RN 37443-42-8) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8605 | ex29321900 | 35 | (2S,3S,4S,5R)-3-(3,4-Difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)tetrahydrofuran-2-yl-4-nitrobenzoate (CAS RN 2875066-49-0) with a purity by weight of 97 % or more | 0 % | — | 31.12.2028 |
| 0.8603 | ex29331990 | 58 | 1H-Pyrazole (CAS RN 288-13-1) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8613 | ex29331990 | 68 | 1-Methyl-1H-pyrazol-4-amine hydrochloride (CAS RN 127107-23-7) with a purity by weight of 95 % or more | 0 % | — | 31.12.2028 |
| 0.8639 | ex29332990 | 43 | 2-Octyl-4,5-dihydro-1H-imidazole (CAS RN 10443-60-4) with a purity by weight of 95 % or more | 0 % | — | 31.12.2028 |
| 0.8637 | ex29333999 | 53 | 5-Methyl-2-pyridylamine (CAS RN 1603-41-4) with a purity by weight of 99 % or more | 0 % | — | 31.12.2028 |
| 0.8618 | ex29333999 | 56 | 2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl]methyl]sulfanyl]1H-benzimidazole (CAS RN 103577-40-8) with a purity by weight of 99 % or more | 0 % | — | 31.12.2028 |
| 0.8624 | ex29333999 | 58 | Tert-butyl N-[5-(trifluoromethyl)pyridin-3-yl]carbamate (CAS RN 1187055-61-3) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8656 | ex29333999 | 66 | (2S,4S)-4-Ethoxy-2-[4-(methoxycarbonyl)phenyl]piperidin-1-ium(2Z)-3-carboxyprop-2-enoate (CAS RN 2408761-21-5) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8612 | ex29335995 | 51 | (1R,5S)-8-Benzyl-3,8-diazabicyclo[3.2.1]octane; 4-(4-hydroxyphenyl)phenol (2:1) (CAS RN 2642049-87-2) with a purity by weight of 95 % or more | 0 % | — | 31.12.2028 |
| 0.8602 | ex29335995 | 54 | 2-Chloro-4-methylpyrimidine (CAS RN 13036-57-2) with a purity by weight of 99 % or more | 0 % | — | 31.12.2028 |
| 0.8643 | ex29339980 | 35 | 2-[6-Methyl-2-(4-methylphenyl)imidazo[1,2-a]pyridin-3-yl]acetic acid (CAS RN 189005-44-5) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8642 | ex29349990 | 38 | 2-Chloro-9H-thioxanthen-9-one (CAS RN 86-39-5) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8601 | ex29349990 | 50 | Vutrisiran (INN) (CAS RN 1867157-35-4) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8606 | ex29359090 | 41 | Lenacapavir sodium (INNM) (CAS RN 2283356-12-5) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8635 | ex29400000 | 70 | Alpha-D-Mannopyranose, 6-acetate 2,3,4-tribenzoate 1-(2,2,2-trichloroethanimidate) (CAS RN 346441-49-4) with a purity by weight of 95 % or more | 0 % | — | 31.12.2028 |
| 0.8614 | ex29420000 | 20 | Dimethylamine—borane (1:1) (CAS RN 74-94-2) with a purity by weight of 98 % or more | 0 % | — | 31.12.2028 |
| 0.8678 | ex32041700 | 28 | Colourant C.I. Pigment Yellow 12 (CAS RN 6358–85-6) and preparations based thereon with a colourant C.I. Pigment Yellow 12 content of 21 % or more by weight | 0 % | — | 31.12.2028 |
| 0.8676 | ex32073000 | 30 | Silver paste, containing by weight:- 45 % or more, but not more than 90 % silver (CAS RN 7440-22-4) and
- 59 % or more, but not more than 92 % of the total solids (including silver)
for use as conductor in the production of solar cells | 0 % | — | 31.12.2028 |
| 0.8630 | ex32073000 | 40 | Aluminium paste, containing by weight:- 72 % or more but not more than 82 % aluminium (CAS RN 7429-90-5)
- with a viscosity of 10 or more, but not more than 100 Pa.s (Brookfield RVT, 14 Spindle, 20 rpm, 25 oC±0,5 oC)
- with an aluminium particle size of not more than 25 μm
for use in the production of solar cells | 0 % | — | 31.12.2028 |
| 0.8655 | ex38112900 | 23 | Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0) | 0 % | — | 31.12.2028 |
| 0.8644 | ex38249992 | 71 | Mixture containing by weight:- 49 % or more but not more than 51 % of ethylene carbonate (CAS RN 96-49-1), and
- 49 % or more but not more than 51 % of 1,3-propanesultone (CAS RN 1120-71-4)
| 3,2 % | — | 31.12.2028 |
| 0.8670 | ex39100000 | 85 | Two-component silicone, with a viscosity of the mixture of 3000 cps or more, but not more than 6000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels | 0 % | — | 31.12.2028 |
| 0.8667 | ex39191080ex39199080 | 7848 | Polytetrafluoroethylene film,- with a thickness of 50 μm or more,
- with a width of 6,30 mm or more but not more than 740 mm,
- an elongation at break of not more than 200 %, and
- coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 μm
| 0 % | — | 31.12.2028 |
| 0.8629 | ex39199080 | 55 | Black polyvinyl chloride film:- with a gloss of more than 25 degrees according to ASTM D 2457,
- whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner
for use in the manufacture of die-cut films for interior and exterior surfaces of cars | 0 % | — | 31.12.2028 |
| 0.8664 | ex39269097 | 22 | Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with:- a density of 20 kg/m3 or more, but not more than 40 kg/m3,
- a tensile strength of not less than 170 kPa,
- water absorption coefficient of not greater than 1 %,
- a length of 5 mm or more but not more than 300 mm,
- a height of 10 mm or more but not more than 400 mm,
- a depth of 5 mm or more but not more than 250 mm
| 0 % | — | 31.12.2028 |
| 0.8646 | ex40169952 | 10 | Hanger of the exhaust muffler consisting of:- a steel bracket with at least one mounting hole and
- silent block,
for use in the manufacture of goods of Chapter 87 | 0 % | — | 31.12.2028 |
| 0.8666 | ex68042100 | 30 | Steel wire used for cropping and squaring semiconductors:- covered with diamond grains of 5 μm or more but not more than 55 μm,
- with a wire diameter of 45 μm or more, but not more than 350 μm
- a breaking strength of 11 N or more but not more than 170 N
| 0 % | — | 31.12.2028 |
| 0.8663 | ex70099100 | 10 | Chrome-plated glass mirror with:- a length of 155 mm or more, but not more than 158 mm,
- a height of 115 mm or more, but not more than 120 mm,
- a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5000 cd/m2 and a central luminescence greater than or equal to 7000 cd/m2,
- a heater foil, with a resistance of 1,1 kΩ or more, but not more than 1,35 kΩ,
designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors | 0 % | — | 31.12.2028 |
| 0.8682 | ex70099100 | 20 | Aspherical, convex or flat chrome-plated glass, ready for framing:- with a length of 140 mm or more but not more than 215 mm,
- with a height of 104 mm or more but not more than 138 mm,
- with curvature radius of 0 mm or more but not more than 1330 mm,
- with a reflectance of more than 40 %,
for the manufacture of automotive mirrors | 0 % | — | 31.12.2028 |
| 0.8616 | ex70199000 | 50 | Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations | 0 % | — | 31.12.2028 |
| 0.8668 | ex84029000 | 10 | Pre-assembled process module unit of an ethane cracker unit, containing:- a dilution steam generator system which produces steam from pretreated quench water for use as dilution steam in steam cracking furnaces,
- a condensate system that collects, filters and deaerates steam condensates, which are subsequently recycled as boiler feed water and further distributed within the cracker unit, and
- a flare system that collects, separates and vaporizes non-recyclable hydrocarbon containing releases from different equipment in a steam cracker, and transfers those towards flares
| 0 % | — | 30.06.2025 |
| 0.8610 | ex84099100 | 28 | Carburetor with:- 2 mounting holes with a diameter of 31 mm,
- a choke bore diameter of 18 mm or more, but not more than 19,05 mm
for use in the manufacture of a two-stroke engine grass trimmer | 0 % | — | 31.12.2028 |
| 0.8651 | ex84145925 | 50 | Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with- a direct current operating voltage of more than 10 V but not more than 14 V, or
- an alternating current operating voltage of more than 185 V, but not more than 254 V,
- an operating temperature of - 40 oC or higher, but not higher than 70 oC,
for use in the manufacture of heat pump tumble dryers and refrigerators or freezers | 0 % | — | 31.12.2028 |
| 0.8648 | ex84145935 | 40 | Electric blower for cooling the battery module:- with an operating voltage of 9 VDC or more but not more than 16 VDC,
- with a centrifugal electric fan,
- with a connector,
- with a plastic case,
- with or without a control unit for the fan electric motor,
for use in the production of rechargeable batteries for hybrid and electric vehicles | 0 % | — | 31.12.2028 |
| 0.8679 | ex84178050 | 10 | Pre-assembled process module unit of an ethane cracker unit, exceeding 29 meters in length, 35 meters in width and 66 meters in height and 5500 metric ton in weight, containing two steam-cracking non-electric furnaces for de-hydrogenation as a part of an ethane cracker plant consisting of a radiation section and a convection section to produce ethylene and propylene from ethane | 0 % | — | 30.06.2025 |
| 0.8669 | ex84194000 | 10 | Pre-assembled process module unit of an ethane cracker unit, containing:- quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water,
- a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module),
- a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water,
- an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module),
| 0 % | — | 30.06.2025 |
| | | - a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), and
- a chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module)
| | | |
| 0.8680 | ex84195080 | 20 | Pre-assembled process module unit of an ethane cracker unit, containing:- an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor,
- pumps and a heat exchanger to deliver ethylene to an external pipeline, and
- a closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor
| 0 % | — | 30.06.2025 |
| 0.8675 | ex84198998 | 10 | Pre-assembled process module unit of an ethane cracker unit, containing:equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected equipment containing:- coolers,
- vapor-liquid separation drums, and
- pumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products,
| 0 % | — | 30.06.2025 |
| | | equipment associated with an external caustic wash tower containing:- caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas,
- a spent caustic pre-treatment system, containing separation drums, pumps and mixers,
- a heat exchanger for the pre-cooling of cracked gas, and
- a separation drum for the removal of water from cracker gas
| | | |
| 0.8632 | ex84679900 | 10 | Pole hedge trimmer cutting elements:- in the form of hedge trimmer attachment,
- with a knife length of 60 cm and teeth opening of 30 mm,
- with angle adjustment of the blade,
- with integrated single stage gearbox,
- with a magnesium cast body,
for use in the manufacture of garden machinery and power tools | 0 % | — | 31.12.2028 |
| 0.8673 | ex84798997 | 33 | Pre-assembled process module unit of an ethane cracker unit, containing:- various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums,
- a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream,
- a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit),
- associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and
- a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers
| 0 % | — | 30.06.2025 |
| 0.8681 | ex84798997 | 43 | Pre-assembled process module unit of an ethane cracker unit, containing:- a system for filtering and cooling of dried cracked gas,
- a deethanizer distillation column and associated equipment for C2-/C3+ separation,
- an acetylene hydrogenation system to remove acetylene within a C2 stream,
- a fuel gas drum that stores fuel gas for cracker furnaces, and
- a system to regenerate dryers in a cracker installation
| 0 % | — | 30.06.2025 |
| 0.8626 | ex84834023 | 20 | Bevel gear:- made of lightweight alloys and steel,
- built on straight or helical bevel gears,
- with an angle between the shafts of 30 degrees or more but not more than 90 degrees
- with a gear 1:1,3 ratio or more but not more than 1:1,46,
for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery | 0 % | — | 31.12.2028 |
| 0.8625 | ex84834023 | 30 | Bevel gear:- made of lightweight alloys and steel,
- built on straight bevel gears,
- with an angle between the shafts of 24 degrees or more but not more than 35 degrees,
for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery | 0 % | — | 31.12.2028 |
| 0.8609 | ex85013100 | 48 | Brushless DC electric motors:- with a rated power of 240 W or more, but not more than 260 W,
- with a voltage of 36 V or higher, but not higher than 52 V
- with a torque of 20 Nm or more, but not more than 140 Nm,
- with a housing made of aluminum, aluminum alloy or plastic,
- with or without a built-in controller,
- with a communication function in the LIN or UART interface,
- weighing 1,5 kg or more, but not more than 5,0 kg,
- adapted for mounting in a bicycle frame
for use in the manufacture of e-bikes | 0 % | — | 31.12.2028 |
| 0.8608 | ex85013100 | 49 | Brushless DC electric motors:- with a rated power of 240 W or more, but not more than 260 W,
- with voltage of 36 V or higher, but not higher than 52 V,
- with torque of 30 Nm or more, but not more than 50 Nm,
- with communication function UART or CAN interface,
- with internal planetary gearbox with fixed or variable ratio,
- made by CNC machined casting,
- with housing made of aluminum,
- weighing 2,3 kg or more, but not more than 4,4 kg,
- adapted for mounting in the front or rear bicycle wheel
| 0 % | — | 31.12.2028 |
| 0.8662 | ex85030099 | 53 | Pressure casted rotor cover of the cooling channel system in the electrical motor:- of EN AC-47100-F aluminum,
- with a sealing cap of stainless steel,
- shot-blasted and machined,
- leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506),
- with a tensile strength of 240 N/mm2 or more,
- with a height of 50 mm or more, but not more than 55 mm,
- with a diameter of 109 mm or more, but not more than 112 mm,
- with a weight of 3,9 kg or more but not more than 4,2 kg
| 0 % | — | 31.12.2028 |
| 0.8658 | ex85030099 | 58 | Pressure casted inner housing of a cooling channel system for an electrical motor:- of EN AC-47100 aluminum,
- shot-blasted and machined,
- leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)
- with a tensile strength of 240 N/mm2 or more,
- with a height of 225 mm or more, but not more than 280 mm,
- with a diameter of 300 mm or more, but not more than 310 mm,
- with a weight of 3,8 kg or more, but not more than 4,9 kg
| 0 % | — | 31.12.2028 |
| 0.8659 | ex85030099 | 63 | Pressure casted outer housing of an electrical motor:- of EN AC-47100 aluminum,
- with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,
- shot-blasted and machined,
- a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)
- with a tensile strength of 240 N/mm2 or more,
- with a height of 245 mm or more, but not more than 360 mm,
- with a width of 360 mm or more, but not more than 525 mm,
- with a length of 345 mm or more, but not more than 450 mm,
- with a weight of 6,4 kg or more, but not more than 8,3 kg
| 0 % | — | 31.12.2028 |
| 0.8627 | ex85052000 | 40 | Electromagnetic clutch:- transmitting torque from the motor shaft to the cutting device pulley,
- containing field coil, rotor, hub and armature,
- with an operating voltage of 12 V
- a current of 3,93 A current or more but not more than 6,86 A,
- a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 oC),
- a static torque of 108 Nm or more but not more than 305 Nm
for use in the manufacture of rider type self-propelled mowers | 0 % | — | 31.12.2028 |
| 0.8660 | ex85076000 | 26 | Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with:- a length of 820 mm or more, but not more than 882 mm,
- a width of 390 mm or more, but not more than 655 mm,
- a height of 110 mm or more, but not more than 137 mm,
- a weight of 60 kg or more, but not more than 165 kg, and
- a power of 11300 Wh or more, but not more than 29360 Wh
| 1,3 % | — | 31.12.2028 |
| 0.8645 | ex85076000 | 28 | Lithium-ion rechargeable battery cell with:- a length of 190 mm or more but not more than 380 mm,
- a width of 90 mm or more but not more than 150 mm,
- a height of 4 mm or more but not more than 15 mm,
- a weight of 0,1 kg or more but not more than 1,2 kg,
- a nominal voltage of 3,0 VDC or more but not more than 4,0 VDC,
- a nominal capacity of not more than 90 Ah,
for use in the manufacture of rechargeable hybrid and electric vehicle batteries | 1,3 % | — | 31.12.2028 |
| 0.8654 | ex85076000 | 36 | Lithium-ion accumulator, with- multiple connected lithium-ion accumulator cells,
- charging and monitoring electronics,
- a power of 74 Wh or more, but not more than 75 Wh,
- in a plastic housing with electrical connection contacts and LCD display,
for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor | 1,3 % | — | 31.12.2028 |
| 0.8628 | ex85118000 | 30 | Ignition module:- made with plastics and non-ferrous metals,
- with the electric components cast in epoxy resin,
- to generate the ignition energy and to electronically control the ignition timing,
- to connect spark plug and circuit breaker,
for use in the manufacture of two-stroke engines | 0 % | — | 31.12.2028 |
| 0.8633 | ex85122000 | 25 | An electrical component with an integrated LED, in an ABS housing, with:- a voltage of 11 V or more, but not more than 15 V,
- a circular shape,
- 2 terminals,
- an outer diameter of the housing of 42,3 mm,
- a diode voltage of 42 V or more, but not more than 48 V and
- a current of 55 mA or more, but not more than 65 mA
| 0 % | — | 31.12.2028 |
| 0.8647 | ex85443000 | 75 | Wiring harness to connect the integrated battery system with the car’s control systems, containing:- an input waterproof connector,
- four or more output connectors,
- two or more plastic clips for attachment
for use in the production of rechargeable batteries for hybrid and electric vehicles | 0 % | — | 31.12.2028 |