Commission Implementing Regulation (EU) 2022/433 of 15 March 2022 imposing definitive countervailing duties on imports of stainless steel cold-rolled flat products originating in India and Indonesia and amending Implementing Regulation (EU) 2021/2012 imposing a definitive anti-dumping duty and definitively collecting the provisional duty imposed on imports of stainless steel cold-rolled flat products originating in India and Indonesia
(a) The Union association, representing the three sampled Union producers: European Steel Association ("EUROFER"), Brussels, Belgium.
(b) Exporting producers in India: Chromeni Steels Private Limited ("Chromeni"), Ahmedabad, Jindal Stainless Limited ("JSL"), New Delhi and Jindal Stainless Hisar Limited ("JSHL"), New Delhi, and their related companies, notably related traders: Jindal Stainless Steelway Limited ("JSS"), Gurugram and Jindal Steelitalia Limited ("JSI"), Gurgaon, service provider: Jindal United Steel Limited ("JUSL"), New Delhi and raw-material supplier: Jindal Coke Limited ("JCL"), New Delhi, jointly referred to as "the Jindal Group").
(c) Exporting producers in Indonesia: PT. Indonesia Ruipu Nickel and Chrome Alloy ("IRNC"), Jakarta and its related companies, notably its four main related Indonesian input suppliers PT. Indonesia Guang Ching Nickel and Stainless Steel Industry ("GCNS"), Jakarta, PT. Indonesia Tsingshan Stainless Steel ("ITSS"), Jakarta, PT. Sulawesi Mining Investment ("SMI"), Jakarta and PT. Tsingshan Steel Indonesia ("TSI"), Jakarta (together with IRNC, jointly referred to as "the IRNC Group"), and the related industrial park where the IRNC Group is located, PT. Indonesia Morowali Industrial Park ("IMIP"), Jakarta, PT. Jindal Stainless Indonesia ("Jindal Indonesia"), Gresik.
the product concerned; the product produced and sold on the domestic markets of the countries concerned; and the product produced and sold in the Union by the Union industry.
i. Direct and potential direct transfer of funds: Pre-shipment and post-shipment credit financing Interest equalization scheme for export financing Incentives provided by Export Credit Agencies Preferential loans of State Bank of India ("SBI") and Steel Development Fund ("SDF") Research and Development ("R&D") Grants of SDF and Ministry of Steel
ii. Government revenue foregone or not collected that is otherwise due: Duty Exemptions and Remissions Schemes (a) Advanced Authorization Scheme ("AAS") (b) Duty Free Import Authorization Scheme ("DFIA") (c) Duty Drawback Scheme ("DDS") (d) Export Promotion of Capital Goods Scheme ("EPCGS") (e) Merchandise Export from India Scheme ("MEIS") (f) Export promotion through duty and tax exemptions – Deemed Export.
Incentives for Export Oriented Units ("EOU") and Special Economic Zones ("SEZ") Income tax incentives
iii. Provision of goods or services for less than adequate remuneration ("LTAR"): The provision of chromium ore for less than adequate remuneration The provision of iron ore for less than adequate remuneration
iv. Purchases of goods through Government procurement policies v. Incentives provided by Exim Bank in the form of Buyers Credits vi. Incentives provided by the local subsidy schemes of the State of Gujarat.
Reduced income tax rate for newly established companies Income tax deductions of R&D costs Income tax deductions of profits resulting from large industrial projects (ITES) Income tax deductions of profits of special category enterprises Income tax deductions of investments into new plants and machineries.
Scheme for Incentive to Industries 2016-2021, which provides a tax incentive for new companies setting up in Gujarat. Gujarat’s VAT remission scheme: a Gujarati enterprise can recoup the VAT paid on its purchased inputs in the form of an input tax credit. Special Economic Zone Act: Tax exemptions for stamp duty and registration fee. Tax exemption for Sales and Other State Taxes on Purchases of Inputs for the SEZ or a unit within the SEZ.
stage 1: production of coke and ferrochromium stage 2: production of liquid stainless steel stage 3: production of slabs stage 4: production of hot rolled coils stage 5: production of cold rolled flat products (product concerned)
"(2) In determining the amount or rate of drawback under this rule, the Central Government shall have regard to: (a) the average quantity or value of each class or description of the materials from which a particular class of goods is ordinarily produced or manufactured in India; (b) the average quantity or value of the imported materials or excisable materials used for production or manufacture in India of a particular class of goods; (c) the average amount of duties paid on imported materials or excisable materials used in the manufacture of semis, components and intermediate products which are used in the manufacture of goods; (d) the average amount of duties paid on materials wasted in the process of manufacture and catalytic agents: Provided that if any such waste or catalytic agent is re-used in any process of manufacture or is sold, the average amount of duties on the waste or catalytic agent re-used or sold shall also be deducted; (e) the average amount of duties paid on imported materials or excisable materials used for containing or, packing the export goods; (f) any other information which the Central Government may consider relevant or useful for the purpose."
Mines and Minerals (Development and Regulation) Act, 1957 Available at https://indiankanoon.org/doc/25127/, last accessed 27 January 2022 .The Minerals (Evidence of Mineral Contents) Rules, 2015 Notification no 246 of 17 April 2015 .The Mineral (Auction) Rules, 2015 Notification no 322 of 20 May 2015 .The Mineral (Non- exclusive Reconnaissance Permits) Rules, 2015 Notification no 516 of 29 June 2015 .The National Mineral Exploration Trust Rules, 2015 Notification no 632 of 14 August 2015 .The Mineral (Mining by Government Company) Rules, 2015 Notification no 749 of 3 December 2015 .The Mines and Minerals (Contribution to District Mineral Foundation) Rules, 2015 Notification no 645 of 20 October 2015 .The Atomic Minerals Concession Rules, 2016 Notification no 471 of 11 July 2016 .The Mineral Concession (other than Atomic and Hydrocarbon Energy Minerals) Rules, 2016 Notification no (number not provided) of 4 March 2016 .The Mineral Conservation & Development Rules, 2017 Notification no 137 of 27 February 2017 .National Mineral Policy, 2019 .Available at https://mines.gov.in/writereaddata/Content/NMP12032019.pdf, last accessed 27 January 2022 .
----------------------
----------------------
----------------------
----------------------
----------------------
----------------------
----------------------
----------------------
----------------------
----------------------
----------------------
Company | DDS | EPCGS | MEIS | Total export subsidies | Chromium ore LTAR | TOTAL |
---|---|---|---|---|---|---|
Chromeni | - | - | ||||
Jindal Group |
i. Direct transfer of funds Provision of preferential loans
ii. Provision of goods or services for less than adequate remuneration ("LTAR") The provision of nickel ore and stainless steel scraps for less than adequate remuneration The provision of coal for less than adequate remuneration The provision of land for less than adequate remuneration The provision of natural gas for less than adequate remuneration The provision of electricity for less than adequate remuneration
iii. Government revenue foregone or not collected that is otherwise due Income tax incentives Import duty exemption VAT exemption on inputs and machinery Land and building tax ("PBB") on mining industry Exemption of (import) income tax
iv. Subsidies linked to the development of Indonesian industry through Chinese investment.
2005 | 2006 | 2007 | 2008 | 2009 | |
---|---|---|---|---|---|
China | |||||
Total Exports |
2010 | 2011 | 2012 | 2013 | 2014 | 2015 | |
---|---|---|---|---|---|---|
China | ||||||
Total Exports |
2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | |
---|---|---|---|---|---|---|---|
Production | |||||||
Exports |
Law No. 27 on Long-Term National Development Plan ("RPJPN") for the period 2005–2025; Law No 4 of 2009 on Mineral and Coal Mining ("2009 Mining Law") as amended by Law 3 of 2020 ("2020 Mining Law"); Government Regulation 55 of 2010 ("GR 55/2010") on the guidance and supervision on the implementation of the management of mineral and coal mining business; Government Regulation 23 of 2010 ("GR 23/2010") as amended by Government Regulation 24 of 2012 ("GR 24/2012") regarding the Implementation of Mineral and Coal Mining Business Activities; MEMR Regulation No. 27 of 2013 on Procedures and Determination of Share Divestment Pricing and Changes of Capital Investment in Coal and Mining Sectors ("MEMR 27/2013"); Government Regulation No. 1 of 2014 ("GR 1/2014") concerning the second amendment to GR 23/2010 as further amended by GR 24/2012 concerning the implementation of the business activities on mineral and coal mining; MEMR Regulation No. 1/2014 ("MEMR 1/2014") regarding the upgrading of added value of minerals through mineral processing and refinery in the country; Government Regulation No. 77 of 2014 ("GR 77/2014"), the third amendment of GR 23/2010; Government Regulation No 1 of 2017 ("GR 1/2017"), the fourth amendment of GR 23/2010 about the Operation of mineral and coal; Ministry of Trade (MOT) Regulation No 01/M-DAG/PER/1/2017 concerning export provisions for processed and purified mining products; MEMR Regulation No 5 of 2017 ("MEMR 5/2017") concerning mineral value-adding improvements through in-country mineral processing and refining activities; MEMR Regulation No 7 of 2017 ("MEMR 7/2017") concerning the procedure for determining the reference price for sales of minerals and coals; MEMR Regulation No 9 of 2017 regarding the divestment procedures and divestment share price fixing mechanism on mineral and coal mining business ("MEMR 9/2017") as amended by MEMR 43/2018; Government Regulation 48 of 2017 ("GR 48/2017"); MoF Regulation PMK No. 13/PMK.010/2017 and MoF Regulation PMK No. 164/PMK.010/2018 setting out the rates of export duty for the various forms of processed metal minerals; MEMR Decree 2946 K/ 30/ MEM/ 2017 concerning the calculation formula for the determination of metal and mineral reference price; MEMR Regulation No 25 of 2018 ("MEMR 25/2018") regarding the minerals and coal mining businesses (which revoked MEMR 5/2017); MEMR Regulation No. 26 of 2018 ("MEMR 26/2018") concerning the implementation of good mining practices and the supervision of mineral and coal mining; MEMR Regulation No 11 of 2018 ("MEMR 11/2018") regarding the Procedure for granting of area, licensing and reporting in the business activity of mineral and coal mining superseded by MEMR Regulation No 7 of 2020 ("MEMR 7/2020") regarding the Procedure for giving the region (allocating the mining area), licensing and reporting on the mineral and coal mining business activities; MEMR Regulation No 22 of 2018 (MEMR 22/2018) regarding amendment to MEMR 11/2018 regarding procedure for the granting of area, licensing and reporting in the business activity of mineral and coal mining; MEMR Regulation No 11 of 2019 ("MEMR 11/2019"), the second amendment to MEMR 25/2018 concerning mineral and coal mining business; MEMR Regulation No 7 of 2020 concerning the procedures for giving the region (allocating the mining area), licensing, and reporting on the mineral and coal mining business activities ("MEMR 7/2020"); MEMR Regulation No 11 of 2020 ("MEMR 11/2020") concerning the third amendment of MEMR Regulation 7/2017 concerning procedure for determining the reference prices fixing of mineral metal and coal sales; and Decision of MEMR Number 84 K/32/MEM/2020 on the guideline for conducting offering, evaluation and calculation of divestment share prices in mineral and coal mining.
a. Mining Business License ("IUP") is a mining business permit required to conduct mining activities within a designated IUP area, which is divided into: (i) Exploration IUP which is valid for a maximum term of 8 years for metal minerals mines; (ii) Operation Production IUP (IUP-OP) which is valid for a maximum term of 20 years for metal minerals mines, specified non-metal minerals mines and coal mines, which may be extended for two additional 10 year terms. The 2009 Mining Law thus provides assurance that holders of exploration permits will be granted production permits. b. Special Mining Business License ("IUPK"), is a special mining business permit issued by the MEMR for areas which have been deemed as State Reserve Areas, which is divided into: (i) Exploration IUPK which is valid for a maximum term of 8 years for metal minerals mines and (ii) Operation Production IUPK (IUPK-OP) which is valid for a maximum 20 years for metal minerals mines. Under the 2009 Mining Law, an IUPK must first be offered through a tender to State or region owned companies. If there is no interest from these parties then the IUPK can be tendered to the private sector. IUPKs are issued for one specific mineral type only, and separate IUPs are required if another mineral type is to be extracted from the same permit area.
(i) the determination of whether there is a "financial contribution" under Article 1.1(a)(1) of the SCM Agreement should focus on the nature of the government action, rather than on the effects or the results of the government action. In other words, it is well acknowledged that governments intervene in the market as regulators and, when so doing, they cause effects on the market and its operators. In this sense, a government may legitimately impose export taxes in order to generate revenue in case of a very competitive commodity in the international markets. In contrast, there is no such legitimate imposition of export restrictions when it becomes evident that the use of such an instrument together with other mechanisms to keep commodities in the domestic market, and to force suppliers to sell below market prices, are part of a broader scheme engineered by the government to support a particular industry or set of industries to boost their competitiveness. Thus, the nature of the government action, including its context, object and purpose, is relevant in assessing the "financial contribution" element; (ii) "entrustment" or "direction" would involve an explicit and affirmative action addressed to a particular party in relation to a particular task or duty, this being very different from the situation in which a government intervenes in the market in some way, which may or may not have a particular result given the factual circumstances and exercise of free choice by the actors in that market. Ultimately, the key question behind the concepts of entrustment or direction is whether the conduct in question, i.e. the financial contribution in the form of provision of goods for less than adequate remuneration, can be attributed to the government or still is the free choice of the private operators in view of market considerations, such as regulatory constraints; (iii) Article 1.1(a)(1)(iv) of the SCM Agreement is, in essence, an anti-circumvention provision and, thus, a finding of entrustment or direction requires that the government gives responsibility to a private body or exercises its authority over a private body in order to effectuate a financial contribution. In most cases, one would expect entrustment or direction of a private body to involve some form of threat or inducement, which could, in turn, serve as evidence of entrustment or direction. However, governments are likely to have other means at their disposal to exercise authority over a private body some of which may be "more subtle" than a command or may not involve the same degree of compulsion; (iv) There must be "a demonstrable link" between the government act and the conduct of the private body. There is no reason why a case of government entrustment or direction should not be premised on circumstantial evidence (such as implicit and informal acts of delegation or command), provided that such evidence is probative and compelling. In this respect, evidence of the government's intention to support the downstream industry (for example, through publicly stated policies or government decisions, or other governmental actions), or the existence of other government measures ensuring a particular result on the market (e.g. an export restraint together with a government measure preventing operators subject to those restraints from stocking their products or a government price regulation with a view to keeping domestic prices low for the product concerned), may be relevant to determine the existence of a "financial contribution" under Article 1.1(a)(1)(iv) of the SCM Agreement (in particular as an indirect manner for the government to provide goods, as provided in sub-paragraph (iii)). In some circumstances, "guidance" by a government can constitute direction. Finally, depending on the circumstances, a private body may decide not to carry out a function with which it was so entrusted or directed, despite the possible negative consequences that may follow. This does not show, however, on its own, that the private body was not entrusted or directed.
i. Domestic processing obligation (see recitals (401) to (404)); ii. Export restrictions until 2019 and a full export ban as of 1 January 2020 (see recitals (405) to (413));iii. Mandatory pricing mechanism (see recitals (435) to (437)).
Company | Overall subsidy amount |
---|---|
IRNC Group |
The Joint Declaration between Indonesia and the PRC on Strategic Partnership, signed in Jakarta on 25 April 2005 ;The Plan of Action for the Implementation of the Joint Declaration on Strategic Partnership between the GOID and the GOC, signed in Jakarta on 21 January 2010 ;The Agreement between the GOID and the GOC on Expanding and Deepening Bilateral Economic and Trade Cooperation, signed in Jakarta on 29 April 2011 ;The Joint Communiqué between the GOID and the GOC on Further Strengthening China-Indonesia Strategic Partnership, delivered in Jakarta on 29 April 2011 ;The Protocol Amending the Memorandum of Understanding between the Ministry of Marine Affairs and Fisheries of Indonesia and the State Oceanic Administration of the PRC on Marine Cooperation, signed in Jakarta on 29 April 2011 ;A joint statement, inviting Chinese enterprises to increase their investments in Indonesia, delivered in Beijing on 25 March 2012 ;The Indonesia-China Five Year Development Program for Economic and Trade Cooperation, signed in Jakarta on 2 October 2013 ;The Agreement between the GOID and the GOC on Indonesia-China Integrated Industrial Parks, signed in Jakarta on 2 October 2013 ;The Joint Statement on Strengthening Comprehensive Strategic Partnership between the PRC and Indonesia, delivered in Beijing on 26 March 2015 ;The Plan of Action for the Implementation of the Comprehensive Strategic Partnership between the GOID and the GOC (2017-2021), signed in Beijing on 14 May 2017 ;The Memorandum of Understanding on Promoting Cooperation on the Development of Regional Comprehensive Economic Corridors between the Coordinating Ministry of Maritime Affairs of Indonesia and the National Development and Reform Commission of the PRC, signed in Bogor on 7 May 2018 ; andThe Memorandum of Understanding on Establishing a Joint Steering Committee for the Development of Regional Comprehensive Economic Corridors between the Coordinating Ministry of Maritime Affairs of Indonesia and the National Development and Reform Commission of the PRC, signed in Beijing on 23 October 2018 .
The Masterplan for Acceleration and Expansion of Indonesia Economic Development 2011-2025 ("MP3EI") published in May 2011; and The Decree of the Ministry of Industry of Indonesia No. 432/M-IND/Kep/7/2014 on the Cooperation Team or the Indonesia-China Integrated Industrial Estate, dated 22 July 2014 .
(1) 13th Five-Year Plan for the Development of Foreign Trade, issued by the Ministry of Commerce ("MOFCOM"), 26 December 2016 ;(2) Guiding Opinions of the State Council on the Promotion of International Production Capacity and Equipment Manufacturing Cooperation, issued in 2015 ("Guiding Opinions"); (3) Made in China 2025, State Council, July 7, 2015 .
(a) "Support enterprises to perform mergers, equity investment and venture capital investment overseas. (b) Actively participate in and promote international industrial cooperation and implement major strategic plans like the Silk Road Economic Belt and the 21st-Century Maritime Silk Road to accelerate building interconnected infrastructure with surrounding countries and deep industrial cooperation. (c) Make use of "opening up" along borders and build a number of overseas manufacturing cooperation parks in eligible countries. (d) Encourage the overseas transfer of high-end equipment , advanced technology and strong industry" (emphasis added).
The Basic Agrarian Law, which repealed land regulations in force before the independence of Indonesia and established the current arrangement of property rights. Similar to the land use right in the People’s Republic of China, HGB can only be acquired for a limited period. In Indonesia this period corresponds to maximum 30 years, which can be further extended by 20 years; Government Regulation No. 40 of 1996, which regulates the transfer of HGUs, use rights and HGBs; Government Regulation No. 24 of 1997 on Land Registration, which lays the foundations of the current procedures of land registration and certification; Government Regulation No. 26 of 2007 on Spatial Management; Government Regulation No. 26 of 2008 on the National Spatial Plan; Morowali Regency Regulation No. 10 of 2012 on the Spatial Plan of the Morowali Regency for the Period 2012-2032, which stipulates the spatial plan for the Morowali Regency, i.e., the sub-provincial entity where IMIP is located; Presidential Regulation No. 17 of 2015 on the National Land Agency ( Badan Pertanahan Nasional – "BPN"), an agency within the Ministry of Agrarian Affairs and Spatial Planning, which determines the role of the BPN and of its local branches in the procedures of land registration and certification;Government Regulation No. 13 of 2017 on the Amendment of Government Regulation No. 26 of 2008 concerning the National Spatial Plan; Head of the BPN Regulation No. 1 of 2018 on Guidance for the Development of Regional Spatial Plan for Provincial, Regency and Municipal Level, which stipulates the general provisions for the development of the spatial plan at the level of provinces, regencies and local districts; Morowali Regency Regulation No. 7 of 2019 on the Spatial Plan of the Morowali Regency for the Period 2019-2039; and Articles 34 to 47 of Government Regulation No. 18 of 2021, which recently complemented in relation to HGB the Basic Agrarian Law and Government Regulation No. 24 of 1997 on Land Registration, prolonging the duration of HGB to 35 years, which can be further extended by 20 years.
Law No. 2 of 2012 on Land Procurement for Development in the Public Interest, which was meant to address the difficulty in land purchase, originated by the complex system of property rights, for projects of public interest. Both IMIP and the GOID separately confirmed that the law did not apply to the Morowali Park since it applies only to 24 business sectors which do not encompass IMIP’s activities. Law No. 2 of 2012 was subsequently and partially amended by Law No. 11 of 2020 on Job Creation ("Omnibus Law"). Law No. 2 of 2012 was implemented by Presidential Regulation No. 71 of 2012 on the Implementation of Land Procurement for Development in the Public Interest, which was in turn subject to three major amendments, the latter of which operated by Presidential Regulation No. 30 of 2015 on the Third Amendment to Presidential Regulation No. 71 of 2012; and Presidential Regulation No. 56 of 2017 on Social Impact Handling in Land Acquisition Process for National Strategic Projects, whose application to IMIP was denied by the GOID, since the law applies only to land procurement for national strategic projects on land over which individuals living there cannot prove customary or property rights. Thus, the law is meant to mitigate the effects of their displacement. Instead, individuals living on the land purchased by IMIP were able to prove their customary rights, which entitled them to compensation.
Government Regulation No. 24 of 2009 on Industrial Estate, in force at the time of the establishment of IMIP. Among its provisions, Article 3, para. 4 stated that "Development of Industrial Estates in the regency […] area is carried out in accordance with the Regency […] Spatial Planning". Moreover, Article 4 added that "The Ministers, related ministers, and governors and regents/mayors in accordance with their respective duties and authorities are responsible for achieving the objective of Industrial Estate development". In particular, according to Article 5, paragraph 2, point (d), "The power [of the Minister] are exercised by: […] (d) setting a benchmark price for selling or leasing plots and/or industrial buildings in the Industrial Estates at the suggestion of the National Team [Industrial Estates]" (Timnas-KI), whereas, according to Article 6, point (b), "[…] governors o regents/mayor provide: […] (b) easiness in acquiring/acquiring land in the area designated for the development of Industrial Estate". Furthermore, Article 10 provides that the area of an Industrial Estate must be at least 50 ha and Articles 13 and 14 that each Industrial Estate must apply for an Industrial Estate Business Licence, once they have obtained a Principle Approval. Finally, Article 18 allows Industrial Estate companies holding an Industrial Estate Business Licence to obtain a HGB on the land purchased and developed, and to divide this HGB up between the plots of land resold to the companies in the Industrial Estate; Agreement between the GOID and the GOC on Indonesia-China Integrated Industrial Parks, signed in Jakarta on 2 October 2013 (see recital (605));Decree of the Minister of Industry on the Cooperation Team for the Indonesia-China Integrated Industrial Estate No. 432/M-IND/Kep/7/2014 of 22 July 2014 (see recital (638));Government Regulation No. 14 of 2015 concerning the Master Plan of National Industry Development for 2015-2035, according to which one of the major infrastructure required by the Indonesian industry is the land for industrial estates. The provision of industrial land in Indonesia is carried out through the development of industrial areas, also translated as areas designated for industry or Industrial Designation Zone. Inside the industrial areas, land for industrial estates and non-industrial land are identified. The purposes of the model of the industrial estates are the following: developing the land in order to provide ready-to-use and/or ready-to-build land to industries, guaranteeing that land rights and permits can be easily obtained, and ensuring the availability of infrastructures and facilities needed by investors ;Indonesian Ministry of Industry, Industry Facts and Figures , 2017, pp. 34-35, https://kemenperin.go.id/majalah/11/facts-and-figures-industri-indonesiaJoint Statement on Strengthening Comprehensive Strategic Partnership between the People’s Republic of China and The Republic of Indonesia of March 2015 (see recitals (577) and (610)); and Government Regulation No. 142 of 2015 (see recital (632)), which replaced the previous Regulation No. 24 of 2009, requires that an entity, in order to be eligible for applying to an Industrial Estate Business Licence, must have a land certificate (or relinquishment of rights of previous occupants) related to its plot of land. Among the several provisions of Regulation No. 142, Article 4(i) states: [The authorities of the Minister cover] "stipulation of guidelines on reference sales price or rent of Industrial blocks and/or buildings within an Industrial Estate based on Industrial Estate Committee proposals" Article 45(1) stipulates that "The Government may initiate the development of Industrial Estates as Industrial infrastructure in the event the private sector is not interested in nor unable to develop an Industrial Estate; and/or to accelerate the spread and even distribution of Industrial development". Article 48(1) reads: "The Government may conduct land procurement in accordance with land procurement laws and regulations".
Company name | Subsidy rate |
---|---|
IRNC Group |
Ministry of Finance Regulation 147/PML.04/2011 and further amended by the Ministry of Finance Regulations 255/PPMK.04/2011 and 120/PMK.04/2013 Regulation of the Ministry of Finance No. 131 of 2018, on bonded zones
Company | Overall subsidy amount |
---|---|
IRNC Group | |
Jindal Indonesia | |
Other cooperating companies | |
Residual |
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Union consumption | ||||
(a) the amount of countervailable subsidies established in relation to the imports from each country is more than de minimis as defined in Article 14(5), and the volume of imports from each country is not negligible; and(b) a cumulative assessment of the effects of the imports is appropriate in light of the conditions of competition between imported products and the like Union product.
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
India | ||||
Market share | ||||
Indonesia | [ | [ | [ | [ |
Market share | [ | [ | [ | [ |
Total countries concerned | [ | [ | [ | [ |
Market share | [ | [ | [ | [ |
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
India | ||||
Indonesia | N/A | [ | [ | [ |
Average of the countries concerned | [ | [ | [ | |
(a) the weighted average sales prices per product type of the three sampled Union producers charged to unrelated customers on the Union market, adjusted to an ex-works level; and (b) the corresponding weighted average prices per product type of imports from the cooperating exporting producers in the countries concerned to the first independent customer on the Union market, established on a cost, insurance, freight (CIF) basis, with appropriate adjustments for post-importation costs.
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Total Union production (tonnes) | ||||
Production capacity (tonnes) | ||||
Capacity utilisation | ||||
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Union industry sales volumes (tonnes) | ||||
Market share | ||||
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Number of employees | ||||
Productivity (tonnes per staff) | ||||
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Average unit sales price (EUR/tonne) | ||||
Unit cost of production (EUR/tonne) | ||||
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Average labour costs per FTE (EUR) | ||||
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Closing stocks (tonnes) | ||||
Closing stocks as a percentage of production | ||||
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Profitability of sales in the Union to unrelated customers (% of sales turnover) | ||||
Cash flow (EUR) | ||||
Investments (EUR) | ||||
Return on investments | ||||
2017 | 2018 | 2019 | IP | ||
---|---|---|---|---|---|
Indonesia | Volume (tonnes) | [ | [ | [ | [ |
Market share | [ | [ | [ | [ | |
Average price (EUR/tonne) | [ | [ | [ | [ | |
Country | 2017 | 2018 | 2019 | IP | |
---|---|---|---|---|---|
Taiwan | Volume (tonnes) | ||||
Market share | |||||
Average price (EUR/tonne) | |||||
Republic of Korea | Volume (tonnes) | ||||
Market share | |||||
Average price (EUR/tonne) | |||||
South Africa | Volume (tonnes) | ||||
Market share | |||||
Average price (EUR/tonne) | |||||
Other third countries | Volume (tonnes) | ||||
Market share | |||||
Average price (EUR/tonne) | |||||
Total of all third countries except the countries concerned | Volume (tonnes) | ||||
Market share | |||||
Average price (EUR/tonne) | |||||
2017 | 2018 | 2019 | IP | |
---|---|---|---|---|
Export volume (tonnes) | ||||
Average price (EUR/tonne) | ||||
Country | Company | Definitive countervailing duty |
---|---|---|
India | Jindal Stainless Limited | |
Jindal Stainless Hisar Limited | ||
Chromeni Steels Private Limited | ||
All other Indian companies | ||
Indonesia | PT. Indonesia Ruipu Nickel and Chrome Alloy | |
PT. Jindal Stainless Indonesia | ||
Non-sampled cooperating company | ||
All other Indonesian companies |
Company | Dumping margin | Subsidy rate | Injury elimination level | Countervailing duty rate | Anti-dumping duty rate |
---|---|---|---|---|---|
India | |||||
Jindal Stainless Limited | |||||
Jindal Stainless Hisar Limited | |||||
Chromeni Steels Private Limited | |||||
All other Indian companies | |||||
Indonesia | |||||
PT. Indonesia Ruipu Nickel and Chrome Alloy | |||||
PT. Jindal Stainless Indonesia | |||||
Non-sampled cooperating company | |||||
All other Indonesian companies |
Loading ...