~~THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of~~ ~~22 May 2012~~ ~~concerning the making available on the market and use of biocidal productsOJ L 167, 27.6.2012, p. 1~~.~~, and in particular the first subparagraph of Article 44(5) thereof,Whereas:(1)~~On ~~29 June 2016~~, Veltek Associates Inc. Europe submitted an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 for authorisation of a biocidal product family named "DEC-AHOL® Product Family" of product-type 2, as described in Annex V to that Regulation, providing written confirmation that the competent authority of the Netherlands had agreed to evaluate the application. The application was recorded under case number BC-XF025530-45 in the Register for Biocidal Products.~~(2)"DEC-AHOL® Product Family" contains propan-2-ol, as the active substance, which is included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012.(3)~~On ~~9 December 2019~~, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, the assessment report and the conclusions of its evaluation to the European Chemicals Agency ("the Agency").~~(4)~~On ~~2 July 2020, the Agency submitted to the Commission an opinionECHA opinion of~~ ~~17 June 2020~~ ~~on the Union authorisation of "DEC-AHOL® Product Family" (ECHA/BPC/261/2020),https://echa.europa.eu/bpc-opinions-on-union-authorisation.~~, the draft summary of the biocidal product characteristics ("SPC") of "DEC-AHOL® Product Family" and the final assessment report on the biocidal product family in accordance with Article 44(3) of Regulation (EU) No 528/2012.~~(5)~~The opinion concludes that "DEC-AHOL® Product Family" is a biocidal product family within the meaning of Article 3(1)(s) of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(1) and (6) of that Regulation.~~(6)~~On ~~20 July 2020, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.(7)The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for "DEC-AHOL® Product Family".(8)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,HAS ADOPTED THIS REGULATION:~~

Article 1A Union authorisation with authorisation number EU-0024324-0000 is granted to Veltek Associates Inc. Europe for the making available on the market and use of the biocidal product family "DEC-AHOL® Product Family" in accordance with the summary of the biocidal product characteristics set out in the Annex.The Union authorisation is valid from 20 April 2021 until 31 March 2031.

Article 2This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.~~Done at Brussels,~~ ~~30 March 2021~~.~~For the CommissionThe PresidentUrsula~~ ~~von der Leyen~~ANNEX~~Summary~~SUMMARY ofOF ~~product~~PRODUCT ~~characteristics~~CHARACTERISTICS ~~for~~FOR aA ~~biocidal~~BIOCIDAL ~~product~~PRODUCT ~~family~~FAMILYDEC-AHOL® Product FamilyProduct type ~~2 –~~(s)PT02: Disinfectants and algaecides not intended for direct application to humans or animals ~~(Disinfectants)~~Authorisation number: EU-0024324-0000R4BP asset number: EU-0024324-0000PART I.FIRST INFORMATION LEVEL1.ADMINISTRATIVE INFORMATION1.1.Family name

Name	DEC-AHOL® Product Family

1.2.Product type(s)

Product type(s)

PT02 –: Disinfectants and algaecides not intended for direct application to humans or animals ~~(Disinfectants)~~

1.3.Authorisation holder

Name and address of the authorisation holder	Name	Veltek Associates Inc. Europe
	Address	Rozengaard 1940, 8212DT Lelystad, ~~Netherlands~~NL
Authorisation number	EU-0024324-0000
R4BP asset number	EU-0024324-0000
Date of the authorisation	20 April 2021
Expiry date of the authorisation	31 March 2031

1.4.Manufacturer(s) of the ~~biocidal products~~product

Name of manufacturer	Veltek Associates, Inc.,
Address of manufacturer	15 Lee Blvd., PA19355 Malvern United States (the)
Location of manufacturing sites	15 Lee Blvd., PA19355 Malvern United States (the)

1.5.Manufacturer(s) of the active substance(s)

Active substance	Propan-2-ol
Name of manufacturer	Exxon Mobil Chemical Company
Address of manufacturer	4045 Scenic Hwy, Baton Rouge, LA 70805 Louisiana United States (the)
Location of manufacturing sites	Exxon Mobil Chemical Company site 14045 Scenic Hwy, Baton Rouge, LA 70805 Louisiana United States (the)

Active substance	Propan-2-ol
Name of manufacturer	Monument Chemical Houston, LTD
Address of manufacturer	16717 Jacintoport Boulevard 77015 Houston United States (the)
Location of manufacturing sites	Monument Chemical Houston, LTD site 116717 Jacintoport Boulevard 77015 Houston United States (the)

Active substance	Propan-2-ol
Name of manufacturer	Shell Chemicals
Address of manufacturer	150 St Claire Parkway ON N0N 1G0 Corunna Canada
Location of manufacturing sites	Shell Chemicals site 1150 St Claire Parkway ON N0N 1G0 Corunna Canada

2.PRODUCT FAMILY COMPOSITION AND FORMULATION2.1.Qualitative and quantitative information on the composition of the family

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
~~Min~~	~~Max~~
Propan-2-ol		~~Active~~active ~~Substance~~substance	67-63-0	200-661-7	64,8	- 65,4 % (w/w)

2.2.Type(s) of formulation

Formulation type(s)

AE Aerosol dispenserAL – Any other liquidAEXX –others ~~Aerosol dispenserAL (any other liquid) –~~- RTU wipe

PART II.SECOND INFORMATION LEVEL –- META SPC(S)~~META SPC 1~~1.META SPC 1 ADMINISTRATIVE INFORMATION1.1.Meta SPC 1 identifier

Identifier

Meta SPC: Meta SPC 1

1.2.Suffix to the authorisation number

Number

1-1

1.3.Product type(s)

Product type(s)

PT02 –: Disinfectants and algaecides not intended for direct application to humans or animals ~~(Disinfectants)~~

2.META SPC 1 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 1

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
~~Min~~	~~Max~~
Propan-2-ol		~~Active~~active ~~Substance~~substance	67-63-0	200-661-7	65,4	- 65,4 % (w/w)

2.2.Type(s) of formulation of the meta SPC 1

Formulation type(s)

~~AL (any~~XX other ~~liquid) –~~- RTU wipe

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1

Hazard statements

H225: Highly flammable liquid and vapour.H319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P261: Avoid breathing vapours.P264: Wash hands thoroughly after handling.P280: Wear protective gloves.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P312: Call a doctor if you feel unwell.P337+P313: If eye irritation persists: Get medical advice.P403+P233: Store in a well-ventilated place. Keep container tightly closed.P405: Store locked up.P501: Dispose of contents to in accordance with local/national regulations.P280: Wear eye protection.

4.AUTHORISED USE(S) OF THE META SPC 14.1.Use description

Table 1. ~~Use #~~ 1 –.1 Disinfection of hard non-porous surfaces; Wipes (individual wipes and multi-pack wipes)

	Product type	PT02 –: Disinfectants and algaecides not intended for direct application to humans or animals ~~(Disinfectants)~~
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: ~~Yeast~~yeastDevelopment stage: -
Field(s) of use	~~Indoor~~indoor useDisinfectant wipe for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Wiping of surfacesDetailed description: -
Application rate(s) and frequency	~~Ready~~Application torate: ~~Use~~-Dilution (%): RTU)Number and timing of application:Product may be used multiple times a day, if required.Contact time: 2 minIndividual wipes:15,.2 cm ×x 15,.2 cm wipe –- 4 wipes per m230,.5 cm ×x 30,.5 cm wipe –- 1 wipe per m245,.7 cm ×x 45,.7 cm wipe –- 1 wipe per m2Multi pack wipes:23 cm x 23 cm - 2 wipes per m230,.5 cm ×x 30,.5 cm –- 1 wipe per m2
Category(ies) of users	~~Industrial~~industrial
Pack sizes and packaging material	Pre-saturated 70 65.4% vw/vw propan-2-ol and water for injection (WFI) wipes.Individual wipesA wipe is composed of 100 % continuous filament polyester fibre. The wipes are packaged in individual heat-sealed plastic bags made of low density polyethylene.Pack sizes:15,.2 cm ×x 15,.2 cm wipe –- 100/case, non- ~~Sterile~~sterile15,.2 cm ×x 15,.2 cm wipe –- 100/case, sterile30,.5 cm ×x 30,.5 cm wipe –- 100/case, sterile45,.7 cm ×x 45,.7 cm wipe –- 100/case, sterileMulti pack wipesA wipe is composed of 100 % continuous filament knitted polyester fibre; 20 wipes per pack; folded together in a re-closable bag package.Pack sizes:100 % polyester 30,.5 cm ×x 30,.5 cm wipe –- 200/case, non-sterile100 % polyester 30,.5 cm ×x 30,.5 cm wipe –- 200/case, sterile100% polyester 23 cm x 23 cm wipe - 200/case, sterile

4.1.1.Use-specific instructions ~~for use~~Use product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to Good Manufacturing Practice (GMP) EU classification in grade A to D.Clean and dry surfaces prior to disinfection. Only use wet wipes. Remove one or two wipes at a time for individual wipes and one wipe at a time for multipack wipes. Make sure to wet surfaces completely. Allow to take effect for at least 2 minutes. Discard wipe after use in a closed container and for multipack wipes close the package after opening.Individual wipes:15,.2 cm ×x 15,.2 cm wipe –- 4 wipes per m230,.5 cm ×x 30,.5 cm wipe –- 1 wipe per m245,.7 cm ×x 45,.7 cm wipe –- 1 wipe per m2Multi pack wipes:30,.5 cm ×x 30,.5 cm –- 1 wipe per m223 cm x 23 cm wipe - 2 wipes per m24.1.2.Use-specific risk mitigation measuresSee general directions for use.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.5.GENERAL DIRECTIONS FOR USE~~Instructions~~ ~~for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 1.~~ OF THE META SPC 15.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation : May cause drowsiness or dizziness.Symptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritation.Symptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position that is comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water/ or shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep container tightly closed. Keep in a cool, well-ventilated place. Keep away from open flames, hot surfaces and sources of ignition. Store at temperatures below 30 °C.Shelf-life: 23 years6.OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 17.1.Trade name(s), authorisation number and specific composition of each individual product

PROCESS2WIPE® IPA70	Trade name(s)			Market area: EU
	Trade name(s)					ALCOH-WIPE®~~PROCESS2WIPE® IPA70~~	Market area: EU
Authorisation number			EU-0024324-0001 1-1
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		~~Active~~active ~~Substance~~substance	67-63-0	200-661-7	65,4

~~META SPC 2~~1.META SPC 2 ADMINISTRATIVE INFORMATION1.1.Meta SPC 2 identifier

Identifier

Meta SPC: Meta SPC 2

1.2.Suffix to the authorisation number

Number

1-2

1.3.Product type(s)

Product type(s)

PT02 –: Disinfectants and algaecides not intended for direct application to humans or animals ~~(Disinfectants)~~

2.META SPC 2 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 2

Common name	~~IUPAC~~UPAC name	Function	CAS number	EC number	Content (%)
~~Min~~	~~Max~~
Propan-2-ol		~~Active~~active ~~Substance~~substance	67-63-0	200-661-7	64,8	- 64,8 % (w/w)

2.2.Type(s) of formulation of the meta SPC 2

Formulation type(s)

AE – Aerosol dispenser

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2

Hazard statements

H222 : Extremely flammable aerosol., H229 : Pressurised container: May burst if heated.H229: Pressurised container: May burst if heatedH319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P261: Avoid breathing vapours.P264: Wash hands thoroughly after handling.P280: Wear protective gloves.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P312: Call a doctor if you feel unwell.P337+P313: If eye irritation persists: Get medical advice.P403+P233: Store in a well-ventilated place. Keep container tightly closed.P405: Store locked up.P410+P412: Protect from sunlight. Do ~~not~~no expose atto temperatures exceeding 50 °C/ 122 °F.P501: Dispose of contents to in accordance with local/national regulations.P280: Wear eye protection.

4.AUTHORISED USE(S) OF THE META SPC 24.1.Use description

Table 1.2. ~~Use #~~ 1 – Disinfection of hard non-porous surfaces in cleanrooms; Aerosols (propellant)

	Product type	PT02 –: Disinfectants and algaecides not intended for direct application to humans or animals ~~(Disinfectants)~~
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: ~~Yeast~~yeastDevelopment stage: -
Field(s) of use	~~Indoor~~indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Aerosol spraying on surfacesDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 mLml/m2Dilution –(%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Apply product by spraying from 15-20 cm distance for 20 seconds/m2.Contact time: 21 ~~min~~minute
Category(ies) of users	~~Industrial~~industrial
Pack sizes and packaging material	325 mLml (11 oz) –- aerosol can (aluminium coated on the inside with epoxy phenolic resin)

4.1.1.Use-specific instructions ~~for use~~Use product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to GMP EU classification in grade A to D.Clean and dry surfaces prior to disinfection. Spray the surface to be disinfected from a distance of 15-20 cm. Thoroughly wet surface with product for 20 seconds/m2, make sure to wet surfaces completely. Allow to take effect for at least 21 ~~minutes~~minute. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe. ~~Cloths~~Clothes or wipes treated with the product must be discarded in a closed container.4.1.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.5.GENERAL DIRECTIONS FOR USE~~Instructions~~ ~~for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 2.~~ OF THE META SPC 25.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation : May cause drowsiness or dizziness.~~Symptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritation.~~Symptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.~~First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position that is comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water/or shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep away from open flames, hot surfaces and sources of ignition.Keep container tightly closed. Keep in a cool, well-ventilated place. Store at temperatures below 40 °C. Protect from frost.Shelf-life: 2 years~~6.~~OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m~~3 ~~for the professional user was agreed and used for the risk assessment of the product.~~7.~~THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 27.1.Trade name(s), authorisation number and specific composition of each individual product~~

~~Trade name(s)~~	~~DEC-AHOL® AEROSOL WFI Formula~~			~~Market area: EU~~
~~Authorisation number~~	~~EU-0024324-0002 1-2~~
~~Common name~~	~~IUPAC name~~	~~Function~~	~~CAS number~~		~~EC number~~	~~Content (%)~~
~~Propan-2-ol~~		~~Active Substance~~	~~67-63-0~~		~~200-661-7~~	~~64,8~~

~~META SPC 3~~1.~~META SPC 3 ADMINISTRATIVE INFORMATION1.1.Meta SPC 3 identifier~~

~~Identifier~~

~~Meta SPC 3~~

~~1.2.Suffix to the authorisation number~~

~~Number~~

~~1-3~~

~~1.3.Product type(s)~~

~~Product type(s)~~

~~PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)~~

2.~~META SPC 3 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 3~~

~~Common name~~	~~IUPAC name~~	~~Function~~	~~CAS number~~	~~EC number~~	~~Content (%)~~
~~Common name~~	~~IUPAC name~~	~~Function~~	~~CAS number~~	~~EC number~~	~~Min~~	~~Max~~
~~Propan-2-ol~~		~~Active Substance~~	~~67-63-0~~	~~200-661-7~~	~~65,4~~	~~65,4~~

~~2.2.Type(s) of formulation of the meta SPC 3~~

~~Formulation(s)~~

~~AL – Any other liquid~~

3.~~HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3~~

~~Hazard statements~~

~~Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.~~

~~Precautionary statements~~

~~Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Avoid breathing vapours.Wash hands thoroughly after handling.Wear protective gloves.IF INHALED: Remove person to fresh air and keep comfortable for breathing.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if easy to do. Continue rinsing.Call a doctor if you feel unwell.If eye irritation persists: Get medical advice.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents in accordance with local/national regulations.Avoid breathing spray.Wear eye protection.~~

4.~~AUTHORISED USE(S) OF THE META SPC 34.1.Use description~~

~~Table 3. Use # 1 – Disinfection of hard non-porous surfaces; Trigger Spray, Liquid~~

~~Product type~~	~~PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)~~
~~Where relevant, an exact description of the authorised use~~	-
~~Target organism(s) (including development stage)~~	~~Common name: BacteriaDevelopment stage: -Common name: YeastDevelopment stage: -~~
~~Field(s) of use~~	~~Indoor~~Disinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
~~Application method(s)~~	~~Trigger Spraying on surfaces~~
~~Application rate(s) and frequency~~	~~Maximal application 35 mL/m~~2 ~~– RTUProduct may be used multiple times a day, if required.Apply product by spraying from 15-20 cm distance. Use 40 squeezes/m~~2.~~Contact time: 2 min~~
~~Category(ies) of users~~	~~Industrial~~
~~Pack sizes and packaging material~~	~~Trigger:473 mL (16 oz) – trigger spray – 12/case, sterile946 mL (32 oz) – trigger spray – 12/case, sterile473 mL (16 oz) – trigger spray – 12/case, non-sterile946 mL (32 oz) – trigger spray – 12/case, non-sterile~~Bottles are made of high density polyethylene, the dip tube is polypropylene. The bottle cap is polypropylene, the induction seal is polypropylene. Bottles are provided with a polyethylene sprayer already on the bottle or provided separately for customer to put on themselves. If the triggers are not installed, a polyethylene screw cap is supplied on the bottles. Bottles are individually triple bagged in cardboard boxes. The product is only supplied to the users in sealed cases.~~Bag in bottle – Trigger:500 mL (16 oz) – Bag in bottle trigger spray – 12/case, sterile1000 mL (32 oz) – Bag in bottle trigger spray – 12/case, sterile~~Bottles are made of high density polyethylene, they are provided with a polyethylene sprayer already on the bottle, the dip tube is polypropylene. The bag inside the bottle is Surlyn® (thermoplastic resins). Bottles are individually triple bagged in cardboard boxes. The product is only supplied to the users in sealed cases.

~~4.1.1.Use-specific instructions for useClean and dry surfaces prior to disinfection. Direct the spray onto the surface from a distance of 15-20cm. Make sure to wet the surface completely (40 squeezes/m~~2). Allow to take effect for at least 2 minutes. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe, if necessary. Only small surfaces may be disinfected. Cloths or wipes treated with the product must be discarded in a closed container.~~4.1.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.4.2.Use description~~

~~Table 4. Use # 2 – Disinfection of hard non-porous surfaces (including floors); Wiping~~

~~Product type~~	~~PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)~~
~~Where relevant, an exact description of the authorised use~~	-
~~Target organism(s) (including development stage)~~	~~Common name: BacteriaDevelopment stage: -Common name: YeastDevelopment stage: -~~
~~Field(s) of use~~	~~Indoor~~Disinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
~~Application method(s)~~	~~Wetting of sterile wipe/cloth prior to wiping of surface~~
~~Application rate(s) and frequency~~	~~Maximal application 35 mL/m~~2 ~~– RTUProduct may be used multiple times a day, if required.Contact time: 2 min~~
~~Category(ies) of users~~	~~Industrial~~
~~Pack sizes and packaging material~~	~~Squeeze bottle:473 mL (16 oz) – squeeze individually bagged- 12/case, sterile473 mL (16 oz) – squeeze, bulk group in one large bag – 12/case, sterile. Bulk pack bottles are not individually bagged.Bottle is made of low density polyethyleneDrum or bottle:18,9 L (5 gallon drum) – container double bagged- 1/case, sterile3,79 L (1 gallon bottle) – each container double bagged- 4/case, sterile3,79 L (1 gallon bottle) – each container double bagged- 4/case, non-sterile~~

~~4.2.1.Use-specific instructions for use~~Clean and dry surfaces prior to disinfection. Thoroughly wet a sterile wipe/cloth with the product, make sure to wet the surfaces completely. Allow to take effect for at least 2 minutes. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe, if necessary. Only small surfaces may be disinfected. Cloths or wipes treated with the product must be discarded in a closed container.~~4.2.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.4.3.Use description~~

~~Table 5. Use # 3 – Disinfection of cleanroom gloves~~

~~Product type~~	~~PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)~~
~~Where relevant, an exact description of the authorised use~~	-
~~Target organism(s) (including development stage)~~	~~Common name: BacteriaDevelopment stage: -Common name: YeastDevelopment stage: -~~
~~Field(s) of use~~	~~IndoorDisinfectant for use on gloved hands in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities.~~
~~Application method(s)~~	~~Dispensing of liquid droplets on gloves~~
~~Application rate(s) and frequency~~	~~1,5 mL per glove – RTUProduct may be used multiple times a day, if required.Contact time: 1 min~~
~~Category(ies) of users~~	~~Industrial~~
~~Pack sizes and packaging material~~	~~946 mL (32 oz) bottle – 12/case, sterile946 mL (32 oz) bottle – 12/case, non-sterileThe bottle is low density polyethylene~~

~~4.3.1.Use-specific instructions for useUse product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to GMP EU classification in grade A to D.~~Hold gloved hands under spout sensor to catch liquid. Thoroughly rub to distribute liquid evenly and wet clean glove surfaces with product. Do not wipe off and allow to remain wet for a minimum of 1 minute. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe, if necessary. Cloths or wipes treated with the product must be discarded in a closed container.~~Do not use on bare hands.4.3.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.3.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.3.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.3.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.~~5.~~GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 3.~~ ~~OF THE META SPC 35.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation: May cause drowsiness or dizziness.Symptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritation.~~Symptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.~~First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position that is comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water/shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep container tightly closed. Keep in a cool, well-ventilated place. Keep away from open flames, hot surfaces and sources of ignition. Store at temperatures below 40 °C.Protect from frost.Shelf-life: 2 years~~6.~~OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m~~3 ~~for the professional user was agreed and used for the risk assessment of the product.~~7.~~THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 37.1.Trade name(s), authorisation number and specific composition of each individual product~~

~~Trade name(s)~~	~~DEC-AHOL® WFI FormulaDEC-AHOL® ASEPTI-CLEANSE~~			~~Market area: EUMarket area: EU~~
~~Authorisation number~~	~~EU-0024324-0003 1-3~~
~~Common name~~	~~IUPAC name~~	~~Function~~	~~CAS number~~		~~EC number~~	~~Content (%)~~
~~Propan-2-ol~~		~~Active Substance~~	~~67-63-0~~		~~200-661-7~~	~~65,4~~

~~META SPC 4~~1.~~META SPC 4 ADMINISTRATIVE INFORMATION1.1.Meta SPC 4 identifier~~

~~Identifier~~

~~Meta SPC 4~~

~~1.2.Suffix to the authorisation number~~

~~Number~~

~~1-4~~

~~1.3.Product type(s)~~

~~Product type(s)~~

~~PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)~~

2.~~META SPC 4 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 4~~

~~Common name~~	~~IUPAC name~~	~~Function~~	~~CAS number~~	~~EC number~~	~~Content (%)~~
~~Common name~~	~~IUPAC name~~	~~Function~~	~~CAS number~~	~~EC number~~	~~Min~~	~~Max~~
~~Propan-2-ol~~		~~Active Substance~~	~~67-63-0~~	~~200-661-7~~	~~65,4~~	~~65,4~~

~~2.2.Type(s) of formulation of the meta SPC 4~~

~~Formulation(s)~~

~~AE – Aerosol dispenser~~

3.~~HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4~~

~~Hazard statements~~

~~Extremely flammable aerosol.Pressurised container: May burst if heated.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.~~

~~Precautionary statements~~

~~Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Do not spray on an open flame or other ignition source.Do not pierce or burn, even after use.Avoid breathing vapours.Wash hands thoroughly after handling.Wear protective gloves.IF INHALED: Remove person to fresh air and keep comfortable for breathing.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Call a doctor if you feel unwell.If eye irritation persists: Get medical advice.Store in a well-ventilated place. Keep container tightly closed.Store locked up.Protect from sunlight. Do not expose at temperatures exceeding 50 °C/122 °F.Dispose of contents in accordance with local/national regulations.Wear eye protection.~~

4.~~AUTHORISED USE(S) OF THE META SPC 44.1.Use description~~

~~Table 6. Use # 1 – Disinfection of hard non-porous surfaces; Aerosols~~

~~Product type~~	~~PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)~~
~~Where relevant, an exact description of the authorised use~~	-
~~Target organism(s) (including development stage)~~	~~Common name: BacteriaDevelopment stage: -Common name: YeastDevelopment stage: -~~
~~Field(s) of use~~	~~Indoor~~Disinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
~~Application method(s)~~	~~Aerosol spraying on surfaces~~
~~Application rate(s) and frequency~~	~~Maximal application 35 mL/m~~2 ~~– RTUProduct may be used multiple times a day, if required.Apply product by spraying from 15-20 cm distance for 20 seconds/m~~2.~~Contact time: 2 min~~
~~Category(ies) of users~~	~~Industrial~~
~~Pack sizes and packaging material~~	~~325 mL (11 oz) – Inverta-Spray® mist sprayAluminium coated inside with epoxy phenolic resin fitted with low density polyethylene bag liner (bag-on-valve), compressed air propellant.~~

~~4.1.1.Use-specific instructions for useClean and dry surfaces prior to disinfection. Spray the surface to be disinfected from a distance of 15-20 cm. Thoroughly wet surface with product for 20 seconds/m~~2, make sure to wet surfaces completely. Allow to take effect for at least 2 minutes. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe. Cloths or wipes treated with the product must be discarded in a closed container.~~4.1.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.~~5.~~GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 4.~~ ~~OF THE META SPC 45.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation: May cause drowsiness or dizziness.~~Symptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritationSymptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position that is comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water/or shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep away from open flames, hot surfaces and sources of ignition.Keep container tightly closed. Keep in a cool, well-ventilated place. Store at temperatures below 40°C. Protect from frost.Shelf-life: 3 years6.OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129.28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 27.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)			DEC-AHOL® AEROSOL WFI Formula	Market area: EU
Authorisation number			EU-0024324-0002 1-2
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	64,8

1.META SPC 3 ADMINISTRATIVE INFORMATION1.1.Meta SPC 3 identifier

Identifier

Meta SPC: Meta SPC 3

1.2.Suffix to the authorisation number

Number

1-3

1.3.Product type(s)

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2.META SPC 3 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 3

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4 - 65,4 % (w/w)

2.2.Type(s) of formulation of the meta SPC 3

Formulation type(s)

AL Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3

Hazard statements

H225: Highly flammable liquid and vapour.H319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P233: Keep container tightly closed.P261: Avoid breathing vapours.P264: Wash hands thoroughly after handling.P280: Wear protective gloves.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P312: Call a doctor if you feel unwell.P337+P313: If eye irritation persists: Get medical advice.P403+P235: Store in a well-ventilated place. Keep cool.P405: Store locked up.P501: Dispose of contents to in accordance with local/national regulations.P261: Avoid breathing spray.P280: Wear eye protection.

4.AUTHORISED USE(S) OF THE META SPC4.1.Use description

Table 13.1 Disinfection of hard non-porous surfaces in cleanrooms; Trigger Spray, Liquid

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: no dataScientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Trigger Spraying on surfacesDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 ml/m2Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Apply product by spraying from 15-20 cm distance. Use 40 squeezes/m2Contact time: 1 minute
Category(ies) of users	industrial
Pack sizes and packaging material	Trigger:473 ml (16 oz) - trigger spray - 12/case, sterile946 ml (32 oz) - trigger spray - 12/case, sterile473 ml (16 oz) - trigger spray - 12/case, non-sterile946 ml (32 oz) - trigger spray - 12/case, non-sterileBottles are made of high density polyethylene, the dip tube is polypropylene. The bottle cap is polypropylene, the induction seal is polypropylene. Bottles are provided with a polyethylene sprayer already on the bottle or provided separately for customer to put on themselves. If triggers are not installed, a polyethylene screw cap is supplied on the bottles. Bottles are individually triple bagged in cardboard boxes. The product is only supplied to the users in sealed cases.Bag in bottle- Trigger:500 ml (16 oz)– Bag in bottle trigger spray - 12/case, sterile1000 ml (32 oz) - Bag in bottle trigger spray - 12/case, sterileBottles are made of high density polyethylene, they are provided with a polyethylene sprayer already on the bottle, the dip tube is polypropylene. The bag inside the bottle is Surlyn® (thermoplastic resins). Bottles are individually triple bagged in cardboard boxes. The product is only supplied to the users in sealed cases.

Table 2.3.2 Disinfection of hard non-porous surfaces (including floors) in cleanrooms; Wiping

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Wetting of sterile wipe/cloth prior to wiping of surfaceDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 ml/m2Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Contact time: 1 minute.
Category(ies) of users	industrial
Pack sizes and packaging material	Squeeze bottle:473 ml (16 oz) – squeeze individually bagged- 12/case, sterile473 ml (16 oz) – squeeze, bulk group in one large bag – 12/case, sterile. Bulk pack bottles are not individually bagged.Bottle is made of low density polyethyleneDrum or bottle:18.9 litre (5 gallon drum) - container double bagged- 1/case, sterile3.79 litre (1 gallon bottle) – each container double bagged- 4/case, sterile3.79 litre (1 gallon bottle) – each container double bagged- 4/case, non-sterile

4.2.1.Use-specific instructionsUse product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to GMP EU classification in grade A to D.Clean and dry surfaces prior to disinfection. Thoroughly wet a sterile wipe/cloth with the product, make sure to wet the surfaces completely. Allow to take effect for at least 1 minute. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe, if necessary. Only small surfaces may be disinfected. Cloths or wipes treated with the product must be discarded in a closed container.4.2.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.4.3.Use description

Table 3.3.3 Disinfection of cleanroom gloves

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use on gloved hands in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities.
Application method(s)	Method: Dispensing of liquid droplets on glovesDetailed description: -
Application rate(s) and frequency	Application rate: 1.5 ml per gloveDilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Contact time: 1 minute.
Category(ies) of users	industrial
Pack sizes and packaging material	946 ml (32 oz) bottle - 12/case, sterile946 ml (32 oz) bottle - 12/case, non-sterileThe bottle is low density polyethylene

4.3.1.Use-specific instructionsUse product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to GMP EU classification in grade A to D.Hold gloved hands under spout sensor to catch liquid. Thoroughly rub to distribute liquid evenly and wet clean glove surfaces with product. Do not wipe off and allow to remain wet for a minimum of 1 minute. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe, if necessary. Cloths or wipes treated with the product must be discarded in a closed container.Do not use on bare hands.4.3.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.3.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.3.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.3.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.5.GENERAL DIRECTIONS FOR USE OF THE META SPC 35.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation : May cause drowsiness or dizzinessSymptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritationSymptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position that is comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water/or shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep container tightly closed. Keep in a cool, well-ventilated place. Keep away from open flames, hot surfaces and sources of ignition. Store at temperatures below 40°C.Protect from frost.Shelf-life : 3 years6.OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129.28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 37.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)			DEC-AHOL® WFI Formula	Market area: EU
Trade name(s)			DEC-AHOL® ASEPTI-CLEANSE	Market area: EU
Authorisation number			EU-0024324-0003 1-3
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4

1.META SPC 4 ADMINISTRATIVE INFORMATION1.1.Meta SPC 4 identifier

Identifier

Meta SPC: Meta SPC 4

1.2.Suffix to the authorisation number

Number

1-4

1.3.Product type(s)

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2.META SPC 4 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 4

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4 - 65,4 % (w/w)

2.2.Type(s) of formulation of the meta SPC 4

Formulation type(s)

AE Aerosol dispenser

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4

Hazard statements

H222 : Extremely flammable aerosol, H229 : Pressurised container: May burst if heatedH229: Pressurised container: May burst if heatedH319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P261: Avoid breathing vapours.P264: Wash hands thoroughly after handling.P280: Wear protective gloves.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P312: Call a doctor if you feel unwell.P337+P313: If eye irritation persists: Get medical advice.P403+P233: Store in a well-ventilated place. Keep container tightly closed.P405: Store locked up.P410+P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.P501: Dispose of contents to in accordance with local/national regulations.P280: Wear eye protection.

4.AUTHORISED USE(S) OF THE META SPC4.1.Use description

Table 1.4.1 Disinfection of hard non-porous surfaces in cleanrooms; Aerosols

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Aerosol spraying on surfacesDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 ml/m2Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required. Apply product by spraying from 15-20 cm distance for 20 seconds/m2.Contact time: 1 minute
Category(ies) of users	industrial
Pack sizes and packaging material	325 ml (11 oz) – Inverta-Spray® mist sprayAluminium coated inside with epoxy phenolic resin fitted with low density polyethylene bag liner (bag-on-valve), compressed air propellant.

4.1.1.Use-specific instructionsUse product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to GMP EU classification in grade A to D.Clean and dry surfaces prior to disinfection. Spray the surface to be disinfected from a distance of 15-20 cm. Thoroughly wet surface with product for 20 seconds/m2, make sure to wet surfaces completely. Allow to take effect for at least 1 minute. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe. Cloths or wipes treated with the product must be discarded in a closed container.4.1.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.5.GENERAL DIRECTIONS FOR USE OF THE META SPC 45.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation : May cause drowsiness or dizzinessSymptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritationSymptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water or shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep away from open flames, hot surfaces and sources of ignition.Keep container tightly closed. Keep in a cool, well-ventilated place. Store at temperatures below 40°C. Protect from frost.Shelf-life: 3 years6.OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129.28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 47.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)		DEC-AHOL® AEROSOL WFI Formula Invertaspray	Market area: EU
Authorisation number		EU-0024324-0004 1-4
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4

Article 2This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEXSUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILYDEC-AHOL® Product FamilyProduct type(s)PT02: Disinfectants and algaecides not intended for direct application to humans or animalsAuthorisation number EU-0024324-0000R4BP asset number EU-0024324-0000PART I.FIRST INFORMATION LEVEL1.ADMINISTRATIVE INFORMATION1.1.Family name

Name	DEC-AHOL® Product Family

1.2.Product type(s)

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

1.3.Authorisation holder

Name and address of the authorisation holder	Name	Veltek Associates Inc. Europe
	Address	Rozengaard 1940 8212DT Lelystad NL
Authorisation number	EU-0024324-0000
R4BP asset number	EU-0024324-0000
Date of the authorisation	20 April 2021
Expiry date of the authorisation	31 March 2031

1.4.Manufacturer(s) of the product

Name of manufacturer	Veltek Associates, Inc.,
Address of manufacturer	15 Lee Blvd. PA19355 Malvern United States (the)
Location of manufacturing sites	15 Lee Blvd. PA19355 Malvern United States (the)

1.5.Manufacturer(s) of the active substance(s)

Active substance	Propan-2-ol
Name of manufacturer	Exxon Mobil Chemical Company
Address of manufacturer	4045 Scenic Hwy, Baton Rouge, LA 70805 Louisiana United States (the)
Location of manufacturing sites	Exxon Mobil Chemical Company site 14045 Scenic Hwy, Baton Rouge, LA 70805 Louisiana United States (the)

Active substance	Propan-2-ol
Name of manufacturer	Monument Chemical Houston, LTD
Address of manufacturer	16717 Jacintoport Boulevard 77015 Houston United States (the)
Location of manufacturing sites	Monument Chemical Houston, LTD site 116717 Jacintoport Boulevard 77015 Houston United States (the)

Active substance	Propan-2-ol
Name of manufacturer	Shell Chemicals
Address of manufacturer	150 St Claire Parkway ON N0N 1G0 Corunna Canada
Location of manufacturing sites	Shell Chemicals site 1150 St Claire Parkway ON N0N 1G0 Corunna Canada

2.PRODUCT FAMILY COMPOSITION AND FORMULATION2.1.Qualitative and quantitative information on the composition of the family

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	64,8 - 65,4 % (w/w)

2.2.Type(s) of formulation

Formulation type(s)

AE Aerosol dispenserAL Any other liquidXX others - RTU wipe

PART II.SECOND INFORMATION LEVEL - META SPC(S)1.META SPC 1 ADMINISTRATIVE INFORMATION1.1.Meta SPC 1 identifier

Identifier

Meta SPC: Meta SPC 1

1.2.Suffix to the authorisation number

Number

1-1

1.3.Product type(s)

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2.META SPC 1 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 1

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4 - 65,4 % (w/w)

2.2.Type(s) of formulation of the meta SPC 1

Formulation type(s)

XX other - RTU wipe

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1

Hazard statements

H225: Highly flammable liquid and vapour.H319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements

4.AUTHORISED USE(S) OF THE META SPC4.1.Use description

Table 1.1.1 Disinfection of hard non-porous surfaces; Wipes (individual wipes and multi-pack wipes)

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant wipe for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Wiping of surfacesDetailed description: -
Application rate(s) and frequency	Application rate: -Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Contact time: 2 minIndividual wipes:15.2 cm x 15.2 cm wipe - 4 wipes per m230.5 cm x 30.5 cm wipe - 1 wipe per m245.7 cm x 45.7 cm wipe - 1 wipe per m2Multi pack wipes:23 cm x 23 cm - 2 wipes per m230.5 cm x 30.5 cm - 1 wipe per m2
Category(ies) of users	industrial
Pack sizes and packaging material	Pre-saturated 65.4% w/w propan-2-ol and water for injection (WFI) wipes.Individual wipesA wipe is composed of 100% continuous filament polyester fibre. The wipes are packaged in individual heat-sealed plastic bags made of low density polyethylene.Pack sizes:15.2 cm x 15.2 cm wipe - 100/case, non- sterile15.2 cm x 15.2 cm wipe - 100/case, sterile30.5 cm x 30.5 cm wipe - 100/case, sterile45.7 cm x 45.7 cm wipe - 100/case, sterileMulti pack wipesA wipe is composed of 100% continuous filament knitted polyester fibre; 20 wipes per pack; folded together in a re-closable bag package.Pack sizes:100% polyester 30.5 cm x 30.5 cm wipe - 200/case, non-sterile100% polyester 30.5 cm x 30.5 cm wipe - 200/case, sterile100% polyester 23 cm x 23 cm wipe - 200/case, sterile

4.1.1.Use-specific instructionsUse product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to Good Manufacturing Practice (GMP) EU classification in grade A to D.Clean and dry surfaces prior to disinfection. Only use wet wipes. Remove one or two wipes at a time for individual wipes and one wipe at a time for multipack wipes. Make sure to wet surfaces completely. Allow to take effect for at least 2 minutes. Discard wipe after use in a closed container and for multipack wipes close the package after opening.Individual wipes:15.2 cm x 15.2 cm wipe - 4 wipes per m230.5 cm x 30.5 cm wipe - 1 wipe per m245.7 cm x 45.7 cm wipe - 1 wipe per m2Multi pack wipes:30.5 cm x 30.5 cm - 1 wipe per m223 cm x 23 cm wipe - 2 wipes per m24.1.2.Use-specific risk mitigation measuresSee general directions for use4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.5.GENERAL DIRECTIONS FOR USE OF THE META SPC 15.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation : May cause drowsiness or dizzinessSymptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritationSymptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position that is comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water/ or shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep container tightly closed. Keep in a cool, well-ventilated place. Keep away from open flames, hot surfaces and sources of ignition. Store at temperatures below 30°C.Shelf-life: 3 years6.OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 17.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)			ALCOH-WIPE®	Market area: EU
Trade name(s)			PROCESS2WIPE® IPA70	Market area: EU
Authorisation number			EU-0024324-0001 1-1
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4

1.META SPC 2 ADMINISTRATIVE INFORMATION1.1.Meta SPC 2 identifier

Identifier

Meta SPC: Meta SPC 2

1.2.Suffix to the authorisation number

Number

1-2

1.3.Product type(s)

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2.META SPC 2 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 2

Common name	UPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	64,8 - 64,8 % (w/w)

2.2.Type(s) of formulation of the meta SPC 2

Formulation type(s)

AE Aerosol dispenser

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2

Hazard statements

Precautionary statements

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P261: Avoid breathing vapours.P264: Wash hands thoroughly after handling.P280: Wear protective gloves.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P312: Call a doctor if you feel unwell.P337+P313: If eye irritation persists: Get medical advice.P403+P233: Store in a well-ventilated place. Keep container tightly closed.P405: Store locked up.P410+P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.P501: Dispose of contents to in accordance with local/national regulations.P280: Wear eye protection.

4.AUTHORISED USE(S) OF THE META SPC4.1.Use description

Table 1.2.1 Disinfection of hard non-porous surfaces in cleanrooms; Aerosols (propellant)

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Aerosol spraying on surfacesDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 ml/m2Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Apply product by spraying from 15-20 cm distance for 20 seconds/m2.Contact time: 1 minute
Category(ies) of users	industrial
Pack sizes and packaging material	325 ml (11 oz) - aerosol can (aluminium coated on the inside with epoxy phenolic resin)

4.1.1.Use-specific instructionsUse product only in cleanrooms which are classified according to ISO 14644-1 in class 1 to 9 or according to GMP EU classification in grade A to D.Clean and dry surfaces prior to disinfection. Spray the surface to be disinfected from a distance of 15-20 cm. Thoroughly wet surface with product for 20 seconds/m2, make sure to wet surfaces completely. Allow to take effect for at least 1 minute. After the required contact time has been achieved, allow surface to air dry or wipe dry with sterilised cloth or wipe. Clothes or wipes treated with the product must be discarded in a closed container.4.1.2.Use-specific risk mitigation measuresEmergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.5.GENERAL DIRECTIONS FOR USE OF THE META SPC 25.1.Instructions for useSee use-specific instructions for use.5.2.Risk mitigation measuresUse adequate ventilation with an air change rate of 8 per hour or more.Apply away from eyes and face.Hand protection: Wear chemically resistant protective gloves.Eye protection: Wear eye protection.Avoid contact with eyes.Do not breathe vapours.Do not eat, drink or smoke when using the product.Wash hands thoroughly after handling.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSymptoms/injuries after inhalation : May cause drowsiness or dizzinessSymptoms/injuries after skin contact: Repeated and/or prolonged skin contact may cause irritation, dryness or cracking.Symptoms/injuries after eye contact: Causes serious eye irritationSymptoms/injuries after ingestion: Symptoms reported in humans are nausea and vomiting due to local irritation and systemic effects like drunkenness, drowsiness, sometimes unconsciousness and low blood sugar (especially in children). Because of the type of formulations (wipes, aerosol and spray) the systemic effects are however less likely.First-aid measures general: Never give anything orally to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).IF INHALED: Move to fresh air and keep at rest in a position that is comfortable for breathing. Call a POISON CENTRE or a doctor.IF ON SKIN: Rinse skin with water/or shower. Remove all contaminated clothing immediately. Gently wash with plenty of soap and water. If symptoms develop, seek medical attention.IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctorIF SWALLOWED: Rinse mouth. Give something to drink if conscious. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.5.4.Instructions for safe disposal of the product and its packagingEmpty containers must be discharged as normal waste or recycled where possible.Additional information: Handle empty containers with care because residual vapours are flammable.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep away from open flames, hot surfaces and sources of ignition.Keep container tightly closed. Keep in a cool, well-ventilated place. Store at temperatures below 40°C. Protect from frost.Shelf-life: 3 years6.OTHER INFORMATIONThe product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129.28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 27.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)			DEC-AHOL® AEROSOL WFI Formula	Market area: EU
Authorisation number			EU-0024324-0002 1-2
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	64,8

1.META SPC 3 ADMINISTRATIVE INFORMATION1.1.Meta SPC 3 identifier

Identifier

Meta SPC: Meta SPC 3

1.2.Suffix to the authorisation number

Number

1-3

1.3.Product type(s)

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2.META SPC 3 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 3

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4 - 65,4 % (w/w)

2.2.Type(s) of formulation of the meta SPC 3

Formulation type(s)

AL Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3

Hazard statements

H225: Highly flammable liquid and vapour.H319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements

4.AUTHORISED USE(S) OF THE META SPC4.1.Use description

Table 13.1 Disinfection of hard non-porous surfaces in cleanrooms; Trigger Spray, Liquid

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: no dataScientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Trigger Spraying on surfacesDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 ml/m2Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Apply product by spraying from 15-20 cm distance. Use 40 squeezes/m2Contact time: 1 minute
Category(ies) of users	industrial
Pack sizes and packaging material	Trigger:473 ml (16 oz) - trigger spray - 12/case, sterile946 ml (32 oz) - trigger spray - 12/case, sterile473 ml (16 oz) - trigger spray - 12/case, non-sterile946 ml (32 oz) - trigger spray - 12/case, non-sterileBottles are made of high density polyethylene, the dip tube is polypropylene. The bottle cap is polypropylene, the induction seal is polypropylene. Bottles are provided with a polyethylene sprayer already on the bottle or provided separately for customer to put on themselves. If triggers are not installed, a polyethylene screw cap is supplied on the bottles. Bottles are individually triple bagged in cardboard boxes. The product is only supplied to the users in sealed cases.Bag in bottle- Trigger:500 ml (16 oz)– Bag in bottle trigger spray - 12/case, sterile1000 ml (32 oz) - Bag in bottle trigger spray - 12/case, sterileBottles are made of high density polyethylene, they are provided with a polyethylene sprayer already on the bottle, the dip tube is polypropylene. The bag inside the bottle is Surlyn® (thermoplastic resins). Bottles are individually triple bagged in cardboard boxes. The product is only supplied to the users in sealed cases.

Table 2.3.2 Disinfection of hard non-porous surfaces (including floors) in cleanrooms; Wiping

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Wetting of sterile wipe/cloth prior to wiping of surfaceDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 ml/m2Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Contact time: 1 minute.
Category(ies) of users	industrial
Pack sizes and packaging material	Squeeze bottle:473 ml (16 oz) – squeeze individually bagged- 12/case, sterile473 ml (16 oz) – squeeze, bulk group in one large bag – 12/case, sterile. Bulk pack bottles are not individually bagged.Bottle is made of low density polyethyleneDrum or bottle:18.9 litre (5 gallon drum) - container double bagged- 1/case, sterile3.79 litre (1 gallon bottle) – each container double bagged- 4/case, sterile3.79 litre (1 gallon bottle) – each container double bagged- 4/case, non-sterile

Table 3.3.3 Disinfection of cleanroom gloves

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use on gloved hands in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities.
Application method(s)	Method: Dispensing of liquid droplets on glovesDetailed description: -
Application rate(s) and frequency	Application rate: 1.5 ml per gloveDilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required.Contact time: 1 minute.
Category(ies) of users	industrial
Pack sizes and packaging material	946 ml (32 oz) bottle - 12/case, sterile946 ml (32 oz) bottle - 12/case, non-sterileThe bottle is low density polyethylene

Trade name(s)			DEC-AHOL® WFI Formula	Market area: EU
Trade name(s)			DEC-AHOL® ASEPTI-CLEANSE	Market area: EU
Authorisation number			EU-0024324-0003 1-3
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4

1.META SPC 4 ADMINISTRATIVE INFORMATION1.1.Meta SPC 4 identifier

Identifier

Meta SPC: Meta SPC 4

1.2.Suffix to the authorisation number

Number

1-4

1.3.Product type(s)

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2.META SPC 4 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 4

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		active substance	67-63-0	200-661-7	65,4 - 65,4 % (w/w)

2.2.Type(s) of formulation of the meta SPC 4

Formulation type(s)

AE Aerosol dispenser

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4

Hazard statements

Precautionary statements

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P261: Avoid breathing vapours.P264: Wash hands thoroughly after handling.P280: Wear protective gloves.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P312: Call a doctor if you feel unwell.P337+P313: If eye irritation persists: Get medical advice.P403+P233: Store in a well-ventilated place. Keep container tightly closed.P405: Store locked up.P410+P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.P501: Dispose of contents to in accordance with local/national regulations.P280: Wear eye protection.

4.AUTHORISED USE(S) OF THE META SPC4.1.Use description

Table 1.4.1 Disinfection of hard non-porous surfaces in cleanrooms; Aerosols

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: no dataCommon name: BacteriaDevelopment stage: -Scientific name: no dataCommon name: yeastDevelopment stage: -
Field(s) of use	indoor useDisinfectant for use in cleanrooms of pharmaceutical, biopharmaceutical, medical device and diagnostic product manufacturing facilities for the disinfection of hard non-porous inanimate surfaces, materials and equipment which are not used for direct contact with food or feeding stuffs.
Application method(s)	Method: Aerosol spraying on surfacesDetailed description: -
Application rate(s) and frequency	Application rate: Maximal application 35 ml/m2Dilution (%): RTUNumber and timing of application:Product may be used multiple times a day, if required. Apply product by spraying from 15-20 cm distance for 20 seconds/m2.Contact time: 1 minute
Category(ies) of users	industrial
Pack sizes and packaging material	325 ml (11 oz) – Inverta-Spray® mist sprayAluminium coated inside with epoxy phenolic resin fitted with low density polyethylene bag liner (bag-on-valve), compressed air propellant.

	Trade name(s)					DEC-AHOL® AEROSOL WFI Formula Invertaspray	Market area: EU
Authorisation number		EU-0024324-0004 1-4
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Propan-2-ol		~~Active~~active ~~Substance~~substance	67-63-0	200-661-7	65,4

Commission Implementing Regulation (EU) 2021/552 of 30 March 2021 granting a Union authorisation for the biocidal product family ‘DEC-AHOL® Product Family’ (Text with EEA relevance)