Article 1The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.

Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 January 2021.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 18 December 2020.For the CouncilThe PresidentM. RothANNEXThe Annex to Regulation (EU) No 1387/2013 is amended as follows:(1)the entries with the following serial numbers are deleted:0.3338, 0.3662, 0.4675, 0.4795, 0.4856, 0.4891, 0.4902, 0.4903, 0.4905, 0.4908, 0.4911, 0.4920, 0.4926, 0.4935, 0.4939, 0.4943, 0.4973, 0.4995, 0.5012, 0.5022, 0.5039, 0.5043, 0.5052, 0.5053, 0.5067, 0.5092, 0.5103, 0.5123, 0.5125, 0.5126, 0.5311, 0.5498, 0.5953, 0.6036, 0.6068, 0.6087, 0.6450, 0.6527, 0.6591, 0.6592, 0.6595, 0.6596, 0.6597, 0.6606, 0.6607, 0.6608, 0.6610, 0.6615, 0.6616, 0.6619, 0.6626, 0.6636, 0.6639, 0.6651, 0.6653, 0.6665, 0.6676, 0.6694, 0.6697, 0.6704, 0.6705, 0.6715, 0.6724, 0.6727, 0.6731, 0.6733, 0.6735, 0.6743, 0.6744, 0.6755, 0.6756, 0.6758, 0.6760, 0.6768, 0.6775, 0.6776, 0.6778, 0.6780, 0.6785, 0.6786, 0.6787, 0.6788, 0.6795, 0.6798, 0.6803, 0.6807, 0.6811, 0.6832, 0.6833, 0.6834, 0.6838, 0.6841, 0.6883, 0.6890, 0.6895, 0.6900, 0.6902, 0.6909, 0.6914, 0.6916, 0.6918, 0.6928, 0.6941, 0.6942, 0.6943, 0.6944, 0.6953, 0.6954, 0.7040, 0.7222, 0.7293, 0.7558, 0.7560, 0.7697, 0.7715 and 0.7855;(2)the following entries replace those entries that have the same serial numbers:

However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).Only the ad valorem duty is suspended. The specific duty shall continue to apply.";

Serial Number	CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
"0.6748	ex07095910	10	Fresh or chilled chanterelles for treatment other than simple repacking for retail sale	0 %	-	31.12.2025
0.2864	ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930	202020202020	Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100,goods of heading 3401, orfatty acids with high purity of heading 2915	0 %	-	31.12.2021
0.6789	ex15121910	10	Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture ofconjugated linoleic acid of heading 3823 orethyl- or methyl esters of linoleic acid of heading 2916	0 %	-	31.12.2022
0.5004	ex20089948	94	Mango puree:not from concentrate,of the genus Mangifera,of a Brix value of 14 or more, but not more than 20,used in the manufacture of products of drink industry	6 %	-	31.12.2022
0.4709	ex20089949ex20089999	3040	Seedless boysenberry puree not containing added spirit, whether or not containing added sugar	0 %	-	31.12.2025
0.6723	ex20089991	20	Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking	0 %	-	31.12.2025
0.4992	ex20094192ex20094199	2070	Pineapple juice:not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry	8 %	-	31.12.2025
0.7393	ex27129099	10	Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms	0 %	-	31.12.2022
0.6658	ex28051200	10	Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)	0 %	-	31.12.2025
0.4979	280530202805303028053040		Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more	0 %	-	31.12.2025
0.6836	ex28112200	15	Amorphous silicon dioxide (CAS RN 60676-86-0)in the form of powderof a purity by weight of 99,0 % or morewith a median grain size of 0,7 μm or more, but not more than 2,1 μmwhere 70 % of the particles have a diameter of not more than 3 μm	0 %	-	31.12.2022
0.5110	ex28181091	20	Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:94 % or more, but less than 98,5 % of aluminium oxide,2 % (± 1,5 %) of magnesium oxide,1 % (± 0,6 %) of yttrium oxide,andeither 2 % (± 1,2 %) of lanthanum oxide, or2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm	0 %	-	31.12.2025
0.6837	ex28183000	20	Aluminium hydroxide (CAS RN 21645-51-2)in the form of powder,with a purity by weight of 99,5 % or more,with a decomposition point of 263°C or more,with a particle size of 4 μm (± 1 μm),with a Total-Na2O-content by weight of not more than 0,06 %	0 %	-	31.12.2025
0.7897	ex28252000	10	Lithium hydroxide monohydrate (CAS RN 1310-66-3)	2.6 %	-	31.12.2021
0.6819	ex28255000	30	Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm	0 %	-	31.12.2025
0.5055	ex28261990	10	Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more	0 %	-	31.12.2025
0.5090	ex28332980	30	Zirconium sulphate (CAS RN 14644-61-2)	0 %	-	31.12.2021
0.6632	ex28402090	10	Zinc borate (CAS RN 12767-90-7)	0 %	-	31.12.2025
0.7288	ex28415000	11	Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more	2 %	-	31.12.2021
0.4222	ex28419085	10	Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %	2.7 %	-	31.12.2021
0.3419	ex28500020	80	Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more	0 %	-	31.12.2024
0.6633	29033921		Difluoromethane (CAS RN 75-10-5)	0 %	-	31.12.2025
0.2583	ex29038980	45	1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more	2 %	-	31.12.2021
0.6611	ex29039980	15	4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)	0 %	-	31.12.2025
0.3409	ex29042000	10	Nitromethane (CAS RN 75-52-5)	0 %	-	31.12.2025
0.3391	ex29042000	20	Nitroethane (CAS RN 79-24-3)	0 %	-	31.12.2022
0.3408	ex29042000	30	1-Nitropropane (CAS RN 108-03-2)	0 %	-	31.12.2025
0.6612	ex29049900	25	Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)	0 %	-	31.12.2025
0.6613	ex29049900	35	1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)	0 %	-	31.12.2025
0.4934	ex29053995	10	Propane-1,3-diol (CAS RN 504-63-2)	0 %	-	31.12.2025
0.6757	ex29062900	40	2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)	0 %	-	31.12.2022
0.6782	ex29081900	40	3,4,5-Trifluorophenol (CAS RN 99627-05-1)	0 %	-	31.12.2025
0.6915	ex29081900	50	4-Fluorophenol (CAS RN 371-41-5)	0 %	-	31.12.2025
0.6649	ex29093038	30	1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)	0 %	-	31.12.2025
0.5117	ex29093090	30	3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)	0 %	-	31.12.2025
0.6614	ex29093090	40	1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)	0 %	-	31.12.2025
0.6783	ex29093090	50	1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)	0 %	-	31.12.2025
0.6784	ex29093090	60	1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)	0 %	-	31.12.2025
0.6927	ex29094980	10	1-Propoxypropan-2-ol (CAS RN 1569-01-3)	0 %	-	31.12.2021
0.6660	ex29109000	50	2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)	0 %	-	31.12.2025
0.5135	ex29124900	30	Salicylaldehyde (CAS RN 90-02-8)	0 %	-	31.12.2025
0.6678	ex29124900	40	3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)	0 %	-	31.12.2025
0.4933	ex29142900	30	(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)	0 %	-	31.12.2025
0.4932	ex29145000	20	3'-Hydroxyacetophenone (CAS RN 121-71-1)	0 %	-	31.12.2025
0.6762	ex29145000	75	7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)	0 %	-	31.12.2022
0.4948	ex29147900	60	4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)	0 %	-	31.12.2021
0.5119	ex29153900	60	Dodec-8-enyl acetate (CAS RN 28079-04-1)	0 %	-	31.12.2025
0.5121	ex29153900	65	Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)	0 %	-	31.12.2025
0.5120	ex29153900	70	Dodec-9-enyl acetate (CAS RN 16974-11-1)	0 %	-	31.12.2025
0.7541	ex29159030	10	Methyl laurate (CAS RN 111-82-0)	0 %	-	31.12.2025
0.4954	ex29159070	60	Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)	0 %	-	31.12.2025
0.3466	ex29161300	30	Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities	0 %	-	31.12.2025
0.4931	ex29162000	60	3-Cyclohexylpropionic acid (CAS RN 701-97-3)	0 %	-	31.12.2025
0.4930	ex29163990	30	2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)	0 %	-	31.12.2025
0.6794	ex29163990	41	4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)	0 %	-	31.12.2025
0.6661	ex29163990	53	5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)	0 %	-	31.12.2025
0.4918	ex29171980	50	Tetradecanedioic acid (CAS RN 821-38-5)	0 %	-	31.12.2025
0.4945	ex29173995	20	Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)	0 %	-	31.12.2025
0.6796	ex29173995	25	Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)	0 %	-	31.12.2025
0.3640	ex29173995	30	Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)	0 %	-	31.12.2025
0.6800	ex29173995	35	1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)	0 %	-	31.12.2025
0.6814	ex29189990	13	3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)	0 %	-	31.12.2025
0.6901	ex29189990	18	Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)	0 %	-	31.12.2025
0.6747	ex29189990	85	Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more	0 %	-	31.12.2025
0.5038	ex29202900	20	Tris(methylphenyl)phosphite (CAS RN 25586-42-9)	0 %	-	31.12.2025
0.5045	ex29202900	40	Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)	0 %	-	31.12.2025
0.7559	ex29209010	15	Ethyl methyl carbonate (CAS RN 623-53-0)	3.2 %	-	31.12.2021
0.6598	ex29209070	80	Bis(pinacolato)diboron (CAS RN 73183-34-3)	0 %	-	31.12.2025
0.4917	ex29212900	40	Decamethylenediamine (CAS RN 646-25-3)	0 %	-	31.12.2025
0.4862	ex29213099	30	1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)	0 %	-	31.12.2021
0.5124	ex29214300	60	3-Aminobenzotrifluoride (CAS RN 98-16-8)	0 %	-	31.12.2025
0.6825	ex29214900	60	2,6-Diisopropylaniline (CAS RN 24544-04-5)	0 %	-	31.12.2025
0.6947	ex29221900	35	2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)	0 %	-	31.12.2025
0.6624	ex29222900	30	1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)	0 %	-	31.12.2025
0.6634	ex29222900	63	Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.4956	ex29222900	75	4-(2-Aminoethyl)phenol (CAS RN 51-67-2)	0 %	-	31.12.2025
0.4914	ex29223900	20	2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)	0 %	-	31.12.2025
0.6761	ex29223900	35	5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)	0 %	-	31.12.2025
0.7853	ex29224985	13	Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more	0 %	-	31.12.2024
0.5037	ex29224985	17	Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)	0 %	-	31.12.2025
0.6948	ex29224985	30	Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)	0 %	-	31.12.2021
0.6650	ex29224985	65	Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)	0 %	-	31.12.2025
0.5063	ex29239000	75	Tetraethylammonium hydroxide, in the form of an aqueous solution containing:35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,not more than 1000 mg/kg of chloride,not more than 2 mg/kg of iron, andnot more than 10 mg/kg of potassium	0 %	-	31.12.2025
0.3689	ex29241900	23	Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more	2 %	-	31.12.2021
0.5066	ex29242970	40	N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)	0 %	-	31.12.2025
0.5127	ex29242970	45	Propoxur (ISO) (CAS RN 114-26-1)	0 %	-	31.12.2025
0.5069	ex29242970	55	N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)	0 %	-	31.12.2025
0.6767	ex29242970	62	2-Chlorobenzamide (CAS RN 609-66-5)	0 %	-	31.12.2025
0.6766	ex29242970	64	N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)	0 %	-	31.12.2025
0.6934	ex29269070	17	Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more	0 %	-	31.12.2025
0.6259	ex29269070	26	Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products	0 %	-	31.12.2024
0.6871	ex29280090	23	Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.4929	ex29280090	25	Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution	0 %	-	31.12.2025
0.6635	ex29280090	50	Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %	0 %	-	31.12.2025
0.5035	ex29309098	10	2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)	0 %	-	31.12.2022
0.6769	ex29309098	22	Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more	0 %	-	31.12.2025
0.6873	ex29309098	26	Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more	0 %	-	31.12.2025
0.6617	ex29309098	53	Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)	0 %	-	31.12.2025
0.5114	ex29309098	55	Thiourea (CAS RN 62-56-6)	0 %	-	31.12.2025
0.6917	ex29319000	63	Chloroethenyldimethylsilane (CAS RN 1719-58-0)	0 %	-	31.12.2021
0.6946	ex29319000	65	Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)	0 %	-	31.12.2021
0.6620	ex29322090	65	Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)	0 %	-	31.12.2025
0.7639	ex29329900	27	(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more	0 %	-	31.12.2023
0.4907	ex29329900	50	7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)	0 %	-	31.12.2021
0.6771	ex29329900	65	4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)	0 %	-	31.12.2025
0.7811	ex29331990	33	Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine	0 %	-	31.12.2024
0.6835	ex29332100	55	1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)	0 %	-	31.12.2025
0.5115	ex29332100	80	5,5-Dimethylhydantoin (CAS RN 77-71-4)	0 %	-	31.12.2025
0.6812	ex29333999	14	N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)	0 %	-	31.12.2022
0.4842	ex29333999	20	Copper pyrithione powder (CAS RN 14915-37-8)	0 %	-	31.12.2021
0.6813	ex29333999	26	2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)	0 %	-	31.12.2022
0.5129	ex29333999	85	2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)	0 %	-	31.12.2025
0.6773	ex29334910	50	1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)	0 %	-	31.12.2025
0.4927	ex29334990	30	Quinoline (CAS RN 91-22-5)	0 %	-	31.12.2025
0.6763	ex29335995	21	N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)	0 %	-	31.12.2025
0.6677	ex29335995	47	6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more	0 %	-	31.12.2025
0.6774	ex29336980	13	Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more	0 %	-	31.12.2025
0.6621	ex29336980	15	2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)	0 %	-	31.12.2025
0.6951	ex29336980	17	Benzoguanamine (CAS RN 91-76-9)	0 %	-	31.12.2021
0.5131	ex29336980	55	Terbutryn (ISO) (CAS RN 886-50-0)	0 %	-	31.12.2025
0.4957	ex29336980	60	Cyanuric acid (CAS RN 108-80-5)	0 %	-	31.12.2025
0.4985	ex29337900	70	(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)	0 %	-	31.12.2025
0.6872	ex29339980	16	Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more	0 %	-	31.12.2025
0.6829	ex29339980	21	1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)	0 %	-	31.12.2025
0.6599	ex29339980	54	3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)	0 %	-	31.12.2025
0.6933	ex29339980	87	Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more	0 %	-	31.12.2025
0.4955	ex29342080	60	Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)	0 %	-	31.12.2022
0.4910	ex29342080	70	N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)	0 %	-	31.12.2025
0.4942	ex29349990	25	2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)	0 %	-	31.12.2025
0.6824	ex29349990	39	4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)	0 %	-	31.12.2025
0.6823	ex29349990	41	11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)	0 %	-	31.12.2025
0.6893	ex29349990	44	Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more	0 %	-	31.12.2025
0.5133	ex29349990	86	Dithianon (ISO) (CAS RN 3347-22-6)	0 %	-	31.12.2025
0.5136	ex29349990	87	2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)	0 %	-	31.12.2025
0.5036	ex29359090	42	Penoxsulam (ISO) (CAS RN 219714-96-2)	0 %	-	31.12.2025
0.6777	ex29359090	54	Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.6802	ex29359090	56	N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)	0 %	-	31.12.2025
0.6903	ex29359090	57	N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)	0 %	-	31.12.2025
0.6664	ex29359090	59	Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more	0 %	-	31.12.2025
0.4944	ex29389030	10	Ammonium glycyrrhizate (CAS RN 53956-04-0)	0 %	-	31.12.2025
0.6600	ex32019090ex32029000	4010	Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)	0 %	-	31.12.2021
0.5091	ex32041100	20	Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight	0 %	-	31.12.2021
0.5134	ex32041100	45	Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)	0 %	-	31.12.2025
0.6652	ex32041200	70	Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight	0 %	-	31.12.2025
0.6603	ex32041700	33	Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight	0 %	-	31.12.2025
0.5100	ex32041900	73	Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight	0 %	-	31.12.2021
0.6726	ex32089019	55	Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent	0 %	-	31.12.2021
0.5031	ex32159070	40	Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:waxa vinyl-based polymer anda colouring agentfor use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices	0 %	-	31.12.2025
0.4863	ex34021190	10	Sodium lauroyl methyl isethionate	0 %	-	31.12.2021
0.6725	ex35069190	50	Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,dissolved in:Methyl ethyl ketone (CAS RN 78-93-3),Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)	0 %	-	31.12.2021
0.6759	ex38021000	10	Mixture of activated carbon and polyethylene, in form of powder	0 %	-	31.12.2025
0.6874	ex38089230	10	Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more	0 %	-	31.12.2025
0.5048	ex38089390	20	Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amineof a kind used in plant growth regulators	0 %	-	31.12.2025
0.5030	ex38089390	30	Aqueous solution containing by weight:1,8 % of sodium para-nitrophenolate,1,2 % of sodium ortho-nitrophenolate,0,6 % of sodium 5-nitroguaiacolate,for use in the manufacture of a plant growth regulator	0 %	-	31.12.2022
0.5088	ex38089390	50	Preparation in the form of powder, containing by weight:55 % or more of Gibberellin A4,1 % or more but not more than 35 % of Gibberellin A7,90 % or more of Gibberellin A4 and Gibberellin A7 combined,not more than 10 % of a combination of water and other naturally occurring Gibberellins,of a kind used in plant growth regulators	0 %	-	31.12.2021
0.6532	ex38089420	30	Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)	0 %	-	31.12.2024
0.6904	ex38112100	12	Dispersing agent containing :esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),35 % or more but not more than 55 % by weight of mineral oils, andwith a chlorine content of not more than 0,05 % by weight,used in the manufacture of blends of additives for lubricating oils	0 %	-	31.12.2025
0.6906	ex38112100	14	Dispersing agent :containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),containing 35 % or more but not more than 55 % by weight of mineral oils,with a chlorine content by weight of not more than 0,05 %,having a total base number of less than 15,used in the manufacture of blends of additives for lubricating oils	0 %	-	31.12.2025
0.6907	ex38112100	16	Detergent containing :Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)40 % or more but not more than 60 % by weight of mineral oils andhaving a total base number more than 120used in the manufacture of blends of additives for lubricating oils	0 %	-	31.12.2025
0.6905	ex38112100	18	Detergent containing :long chain alkyltoluene calcium sulphonates,more than 30 % but not more than 50 % by weight of mineral oils, andhaving a total base number of more than 310 but not more than 340,used in the manufacture of blends of additives for lubricating oils	0 %	-	31.12.2025
0.6671	ex38112100	75	Additives containing:Calcium (C10-C14) dialkylbenzenesulfonates,more than 40 %, but not more than 60 % by weight of mineral oils,with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils	0 %	-	31.12.2022
0.6669	ex38112100	77	Antifoam additives consisting of:a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, andmore than 50 % but not more than 80 % by weight of mineral oils,for use in the manufacture of additive blends for lubricating oils	0 %	-	31.12.2022
0.6666	ex38112100	80	Additives containing :polyisobutylene aromatic polyamine succinimide,more than 40 % but not more than 60 % by weight of mineral oils,with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils	0 %	-	31.12.2022
0.6668	ex38112900	65	Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils	0 %	-	31.12.2022
0.5062	ex38159090	30	Catalyst, consisting of a suspension in mineral oil of:tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, andsilicon dioxide,containing 6,6 % (± 0,6 %) by weight of magnesium, andcontaining 2,3 % (± 0,2 %) by weight of titanium	0 %	-	31.12.2025
0.2783	ex38159090	80	Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol	0 %	-	31.12.2025
0.6810	ex38249992	23	Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol	0 %	-	31.12.2025
0.4909	ex38249992	29	Preparation containing by weight:85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate	0 %	-	31.12.2025
0.6779	ex38249992	40	Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent	0 %	-	31.12.2025
0.7742	ex38249992	52	Electrolyte containing:5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),for use in the manufacture of motor vehicle batteries	3.2 %	-	31.12.2021
0.5050	ex38249992	61	3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine	0 %	-	31.12.2025
0.6720	ex38249992	68	Preparation containing by weight:20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)Dissolved in:10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)	0 %	-	31.12.2025
0.6719	ex38249992	69	Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) andnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)	0 %	-	31.12.2021
0.3069	ex38249992	88	2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)	0 %	-	31.12.2025
0.4719	ex38249993	35	Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)	0 %	-	31.12.2024
0.7313	ex38249996	45	Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:a particle size of less than 10 μm,a purity by weight of more than 98 %	3.2 %	-	31.12.2021
0.6628	ex38249996	46	Manganese zinc ferrite granulate, containing by weight:52 % or more but not more than 76 % of iron(III)oxide,13 % or more but not more than 42 % of manganese oxide, and2 % or more but not more than 22 % of zinc oxide	0 %	-	31.12.2025
0.6749	ex38249996	48	Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %	0 %	-	31.12.2025
0.6897	ex39014000	30	Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:more than 10 % but not more than 20 % by weight of copolymer,a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, anda density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,for use in the co-extrusion processing of films for flexible food packaging	0 %	m3	31.12.2025
0.6920	ex39019080	53	Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), anda melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238)	0 %	m3	31.12.2025
0.6734	ex39019080	55	Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:an acrylic acid content of 6 % or more but not more than 50 % by weight, anda melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)	0 %	-	31.12.2025
0.5049	ex39019080	67	Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more	0 %	-	31.12.2025
0.6736	ex39039090	65	Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)	0 %	-	31.12.2025
0.6804	ex39039090	70	Copolymer in the form of granules containing by weight:75 % (± 7 %) styrene and25 % (± 7 %) methylmethacrylate	0 %	m3	31.12.2025
0.4981	ex39046980	81	Poly(vinylidene fluoride) (CAS RN 24937-79-9)	0 %	-	31.12.2025
0.6672	ex39069090	33	Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm	0 %	-	31.12.2025
0.6663	ex39069090	37	Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm	0 %	-	31.12.2025
0.6891	ex39071000	20	Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine	0 %	-	31.12.2022
0.6839	ex39073000	15	Epoxide resin, halogen-free,containing by weight more than 2 % phosphorous calculated on the solid content, chemically bound in the epoxide resin,not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, andcontaining solvents,for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits	0 %	-	31.12.2025
0.6840	ex39073000	25	Epoxide resincontaining by weight 21 % or more of brome,not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, andcontaining solvents	0 %	-	31.12.2025
0.4940	ex39079980ex39139000	3020	Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)	0 %	-	31.12.2025
0.5057	ex39079980	80	Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles	0 %	-	31.12.2025
0.5032	ex39094000	20	Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices	0 %	-	31.12.2025
0.6921	ex39100000	15	Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated	0 %	-	31.12.2021
0.7217	ex39100000	45	Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8)	0 %	-	31.12.2021
0.5109	ex39119099	35	Alternated copolymer of ethylene and maleic anhydride (EMA)	0 %	-	31.12.2025
0.4953	ex39121100	40	Cellulose diacetate powder	0 %	-	31.12.2025
0.6718	ex39123985	50	Polyquaternium 10 (CAS RN 68610-92-4)	0 %	-	31.12.2025
0.4757	ex39191080	37	Polytetrafluoroethylene film:with a thickness of 100 μm or more,an elongation at break of not more than 100 %,coated on one side with a pressure sensitive silicon adhesive	0 %	-	31.12.2025
0.4761	ex39191080ex39199080	4326	Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner	0 %	-	31.12.2022
0.6886	ex39191080	63	Reflecting film consisting ofa layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,a layer of an acrylic resin having embedded glass beads,a layer of an acrylic resin hardened by a melamine cross-linking agent,a metal layer,an acrylic adhesive, anda release film	0 %	-	31.12.2025
0.4947	ex39199080	65	Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner	0 %	-	31.12.2025
0.4925	ex39199080	70	Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad	0 %	-	31.12.2025
0.4964	ex39199080	82	Reflecting film consisting of:a polyurethane layer,a glass microspheres layer,a metallised aluminium layer, andan adhesive, covered on one or both sides with a release liner,whether or not a poly(vinyl chloride) layer,a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use	0 %	-	31.12.2025
0.6640	ex39201040	40	Tubular layered film predominately of polyethylene:consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,having a total thickness of 55 μm or more,having a diameter of 500 mm or more but not more than 600 mm	0 %	-	31.12.2025
0.3357	ex39206219	48	Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)	0 %	-	31.12.2025
0.2589	ex39206219	52	Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D257 method)	0 %	-	31.12.2023
0.6911	ex39211900	40	Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:a width of 98 mm or more but not more than170 mm,a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators	3.2 %	-	31.12.2021
0.7263	ex39211900	45	Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:zero transversal production direction (TD) shrinkage,a total thickness of 8 μm or more, but not more than 50 μm,a width of 15 mm or more, but not more than 900 mm,a length of more than 200 m, but not more than 8000 m,an average pore size between 0,02 μm and 0,1 μm,laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,coated or not with surfactant,coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm	3.2 %	-	31.12.2021
0.6742	ex39219055	40	Three layered fabric sheet, in rolls,comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,coated on both sides with polyamide,of a total thickness not more than 135 μm,of a total weight not more than 80 g/m2	0 %	m2	31.12.2025
0.7335	ex39263000ex39269097	5048	Coated interior or exterior decorative parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, anda PVC foil,not containing layers of copper, nickel or chromium,for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705	0 %	p/st	31.12.2022
0.6717	ex39269097	23	Plastic cover with clips for the exterior rear-view mirror of motor vehicles	0 %	p/st	31.12.2025
0.3850	ex39269097	43	Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm	0 %	-	31.12.2023
0.6708	ex40094200	20	Rubber brake hose with:textile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,for use in the manufacture of goods of Chapter 87	0 %	-	31.12.2025
0.6844	ex40169300	30	Rectangular ethylene-propylene-diene rubber gasket, with:a length of 72 mm or more but not more than 825 mm,a width of 18 mm or more but not more than 155 mm,a peak temperature of 150°C or more but not more than 240 °C,a permissible material outflow at the place of the mold split of not more than 0,3 mm	0 %	-	31.12.2025
0.6884	ex54033900	10	Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry	0 %	-	31.12.2022
0.5059	ex56031310	20	Non-woven of spunbonded polyethylene, with a coating,of a weight of more than 80 g/m2 but not more than 105 g/m2 andan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)	0 %	m2	31.12.2025
0.5987	ex56031490	60	Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2,not laminated,with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M,pleatable	0 %	m2	31.12.2023
0.4978	ex69091900	20	Silicon nitride (Si3N4) rollers or balls	0 %	-	31.12.2025
0.7619	ex70060090	40	Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:a length of 300 mm or more but not more than 1500 mm,a width of 300 mm or more but not more than 1500 mm,a thickness of 0,5 mm or more but not more than 1,1 mm,an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,with or without a multi layer anti-reflection-coating on the other side, andmachined (chamfered) edges	0 %	-	31.12.2023
0.6870	ex70091000	40	Electrochromic self-dimming inside rear-view mirror, consisting of:a mirror supporta plastic casing andan integrated circuitfor use in the manufacture of motor vehicles of Chapter 87	0 %	-	31.12.2025
0.5021	ex70191910	20	Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate	0 %	-	31.12.2025
0.5020	ex70191910	25	Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate	0 %	-	31.12.2025
0.4853	ex72029980	10	Ferro-dysprosium, containing by weight:78 % or more of dysprosium, and18 % or more but not more than 22 % of iron	0 %	-	31.12.2025
0.7502	ex73182400	40	Tube or pipe restraint joint elements:of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,produced by metal injection moulding,with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/ – 1),measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm	0 %	-	31.12.2023
0.6680	ex73269098	40	Iron and steel weightswhether or not with parts of other materialwhether or not with parts of other metalswhether or not surface treatedwhether or not printedof a kind used for the production of remote controls	0 %	-	31.12.2025
0.5029	ex76042910ex76061299ex76061299	102125	Sheets and bars of aluminium-lithium alloys	0 %	-	31.12.2022
0.5487	ex76071190ex76071190ex76071190ex76071190ex76071190ex76071190	484951525356	Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %	0 %	-	31.12.2021
0.4050	ex76071190	60	Plain aluminium foil with the following parameters:an aluminium content of 99,98 % or more,a thickness of 0,070 mm or more but not more than 0,125 mm,with a cubic texture,of a kind used for high voltage etching	3.7 %	-	31.12.2021
0.7698	ex76072090	10	Aluminium foil, in rolls:coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,with a width of 200 mm or more, but not more than 400 mm,with a thickness of 0,138 mm or more, but not more than 0,168 mm,for use in the manufacture of lithium-ion battery cell covers	3.7 %	-	31.12.2021
0.6730	ex81019600	10	Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μma resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre	0 %	-	31.12.2025
0.5097	ex81043000	35	Magnesium powderof purity by weight of more than 99,5 %with a particle size of 0,2 mm or more but not more than 0,8 mm	0 %	-	31.12.2025
0.4904	ex81089030	45	Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967	0 %	-	31.12.2025
0.6805	ex81130090	20	Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules	0 %	-	31.12.2025
0.5024	ex83016000ex84199085ex84799070ex84819000ex85030099ex85159080ex85371098ex85389099ex87089910ex87089997	30403050434055705522	Silicone or plastic keyboards, comprising:parts of common metal, andwhether or not comprising parts of plastic,epoxy resin reinforced with fiberglass or wood,whether or not printed or surface-treated,with or without electrical conductors,with or without a membrane bonded to the keyboard,with or without mono or multilayer protective film	0 %	p/st	31.12.2025
0.4996	ex84079090	20	Compact Liquid Petroleum Gas (LPG) Engine System, with:6 cylinders,an output of 75 kW or more, but not more than 80 kW,inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 8427	0 %	-	31.12.2025
0.6160	ex84143081ex84148073	6030	Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:driven by "on-off" single phase alternate current (AC) or "brushless direct current" (BLDC) variable speed motors,with a nominal power rating of not more than 1,5 kW,a rated voltage of 100 V or more but not more than 240 V,with a height of not more than 300 mm,an external diameter of not more than 150 mm,with a unit weight of not more than 15 kg,for use in the manufacture of heat pumps for household appliances, including clothes dryers	0 %	-	31.12.2023
0.7317	ex84148022	20	Air membrane compressor with:a flow of 4,5 l/min or more, but not more than 7 l/min,power input of not more than 8,1 W, anda gauge pressure capacity not exceeding 400 hPa (0,4 bar),of a kind used in the production of motor vehicle seats	0 %	-	31.12.2022
0.6842	ex84159000	60	Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,a weight of 0,02 kg or more but not more than 0,25 kg	0 %	p/st	31.12.2025
0.6860	ex84159000	65	Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:a length of 143 mm or more but not more than 292 mm,a diameter of 31 mm or more but not more than 99 mm,with a weight of not less than 0,12 kg and not more than 0,9 kg,a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, anda solid particle diameter of not more than 0,06 mm,for use in the manufacture of car air-conditioning systems	0 %	p/st	31.12.2022
0.6821	ex84369900	10	Part containing:a single-phase AC motor,an epicyclic gearing,a cutter blade,and whether or not containing:a capacitor,a part fitted with a threaded bolt,for use in the manufacture of garden shredders	0 %	p/st	31.12.2025
0.7380	ex84818059	30	Two-way flow control valve with housing, with:at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,at least 330 cm3/minute, but not more than 5000 cm3/minute flow rate,at least 19, but not more than 300 MPa operating pressure	0 %	-	31.12.2022
0.7518	ex84819000	40	Valve armature:for the opening and closing of the flow of fuel,consisting of a shaft and a blade,with at least 3 but not more than 8 holes on the blade,made of metal and/or metal alloy(s)	0 %	-	31.12.2023
0.4997	ex84834090	80	Transmission gearbox, with:not more than 3 gears,an automatic deceleration system, anda power reversal system,for use in the manufacture of goods of heading 8427	0 %	p/st	31.12.2025
0.6854	ex85011010	20	Synchronous motor for a dishwasher with a water flow control mechanism witha length without axle of 24 mm (± 0,3),a diameter of 49,3 mm (± 0,3),a rated voltage of 220 V AC or more but not more than 240 V AC,a rated frequency of 50 Hz or more but not more than 60 Hz,an input power of not more than 4 W,a rotation speed of 4rpm or more but not more than 4,8rpm,an output torque of not less than 10kgf/cm	0 %	-	31.12.2022
0.6858	ex85011099	64	DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:with Ingress Protection (IP) standard of IP69,with a rotor speed of not more than 6500 rpm when not loaded,with a rated voltage of 12,0 V (± 0,1),of a specified temperature range of – 40 °C or more, but not more than + 165 °C,with or without a connecting pinion,with or without an engine connector,with or without a flange,with a diameter of not more than 40 mm (not including the flange),with an overall height of not more than 90 mm (from the base to the pinion)	0 %	-	30.06.2021
0.6880	ex85011099	65	Electric turbocharger actuator, with:a DC motor,an integrated gear mechanism,a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 25 mm,with or without an on-board diagnostics interface	0 %	-	31.12.2025
0.6627	ex85011099	75	Permanently excited DC motor witha multiple-phase winding,an external diameter of 28 mm or more but not more than 35 mm,a rated speed of not more than 12000 rpm,a power supply voltage of 8 V or more but not more than 27 V	0 %	-	31.12.2025
0.4731	ex85013100	37	Permanently excited DC motor witha multiple-phase winding,an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,a rated speed of not more than 15000 rpm,an output of 45 W or more but not more than 400 W, anda supply voltage of 9 V or more but not more than 50 V,whether or not with a drive disc,whether or not with a crankcase,whether or not with a fan,whether or not with a cap assembly,whether or not with a sun gear,whether or not with a speed and rotational direction encoder,whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,whether or not with a mounting flange	0 %	-	31.12.2024
0.5577	ex85013100	50	DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 9 V or more, but not more than 16 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without a pulley,with or without an electronic power steering sensor/controller	0 %	-	31.12.2022
0.6809	ex85013100ex85013200	5345	Automotive-ready, brushless and permanently excited direct current motor with:a specified speed of not more than 4100 rpm,a minimum output of 400 W, but not more than 1,3 kW (at 12 V),a flange diameter of 85 mm or more, but not more than 200 mm,a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,a housing length of not more than 265 mm, measured from the flange to the outer ending,	0 %	-	31.12.2025
			a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, andsurface magnets,whether or not with electronic power steering controller
0.6161	ex85030099	55	Stator for brushless motor, with:an internal diameter of 206,6 mm (± 0,5),an external diameter of 265,0 mm (± 0,2), anda width of 37,2 mm or more but not more than 47,8 mm,of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums	0 %	p/st	31.12.2025
0.7764	ex85043180	55	Electrical transformer with:a capacity of 0,22 kVA or more, but not more than 0,24 kVA,an operating temperature range of + 10°C or more, but not more than + 125°C,four or five inductively coupled copper wire windings,11 or 12 connection pins at the bottom, anddimensions of not more than 32 mm x 37,8 mm x 25,8 mm	0 %	-	31.12.2024
0.7788	ex85051100	68	Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:a length of 13,8 mm or more but not more than 45,2 mm,a width of 7,8 mm or more but not more than 25,2 mm,a height of 1,3 mm or more but not more than 4,7 mm	0 %	-	31.12.2024
0.6857	ex85051100ex85051990	7335	Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:a length of 5 mm or more, but not more than 60 mm,a width of 5 mm or more, but not more than 40 mm,a thickness of 3 mm or more, but not more than 15 mm	0 %	p/st	31.12.2022
0.7641	ex85076000	13	Prismatic lithium-ion electric accumulators with:a width of 173,0 mm (± 0,3 mm),a thickness of 45,0 mm (± 0,3 mm),a height 125,0 mm (± 0,3 mm),a nominal voltage of 3,67 V (± 0,01 V), anda nominal capacity of 94 Ah and/or 120 Ah,for use in the manufacture of rechargeable electric vehicle batteries	1.3 %	-	31.12.2021
0.6685	ex85076000	15	Cylindrical lithium-ion-accumulators or modules with:a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,a nominal voltage of 36 V or more, but not more than 48 V,a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles	1.3 %	-	31.12.2021
0.6625	ex85076000	17	Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:a rated voltage of 12 V,a length of 350 mm or more but not more than 355 mm,a width of 170 mm or more but not more than 180 mm,a height of 180 mm or more but not more than 195 mm,weighing 10 kg or more but not more than 15 kg,a nominal charge of 60 Ah or more, but not more than 80 Ah	1.3 %	-	31.12.2021
0.7663	ex85076000	18	Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:a length of not more than 1600 mm,a width of not more than 448 mm,a height of not more than 395 mm,a nominal voltage of 280 V or more but not more than 400 V,a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,a charging voltage of 110 V or more but not more than 230 V, andcontaining 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703	1.3 %	-	31.12.2021
0.7717	ex85076000	22	Integrated battery system in a metal case with holders, consisting of:a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),Battery Management System,a relay,a low voltage converter (DC/DC),at least one connector,for use in the manufacture of hybrid motor vehicles	1.3 %	-	31.12.2021
0.2907	ex85076000	30	Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries	1.3 %	-	31.12.2021
0.6703	ex85076000	33	Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 1000 mm,a width of 100 mm or more, but not more than 1000 mm,a height of 200 mm or more, but not more than 1500 mm,a weight of 75 kg or more, but not more than 200 kg,a nominal capacity not less than 150Ah and not more than 500 Ah,a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)	1.3 %	-	31.12.2021
0.6702	ex85076000	37	Lithium-ion accumulator, with:a length of 1200 mm or more, but not more than 2000 mm,a width of 800 mm or more, but not more than 1300 mm,a height of 2000 mm or more, but not more than 2800 mm,a weight of 1800 kg or more, but not more than 3000 kg,a nominal capacity of 2800 Ah or more but not more than 7200 Ah	1.3 %	-	31.12.2021
0.5548	ex85076000	50	Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 500 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 75 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda nominal energy of 458 Wh or more, but not more than 2158 Wh	1.3 %	-	31.12.2021
0.5342	ex85076000	65	Cylindrical lithium ion cell with3,5 VDC to 3,8 VDC,300 mAh to 900 mAh, anda diameter of 10,0 mm to 14,5 mm	1.3 %	-	31.12.2021
0.7888	ex85076000	68	Lithium-ion accumulator in a metal housing, witha length of 65 mm or more, but not more than 225 mm,a width of 10 mm or more, but not more than 75 mm,a height of 60 mm or more, but not more than 285 mm,a nominal voltage of 2,1 V or more, but not more than 3,8 V, anda nominal capacity of 2,5 Ah or more, but not more than 325 Ah	1.3 %	-	31.12.2021
0.5356	ex85076000	75	Rectangular lithium-ion-accumulator, witha metal casing,a length of 173 mm (± 0,15 mm),a width of 21 mm (± 0,1 mm),a height of 91 mm (± 0,15 mm),a nominal voltage of 3,3 V, anda nominal capacity of 21 Ah or more	1.3 %	-	31.12.2021
0.6753	ex85076000	77	Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mm,a width of 935 mm or more, but not more than 1660 mm,a height of 85 mm or more, but not more than 700 mm,a weight of 250 kg or more, but not more than 700 kg,a power of not more than 175 kWh,a nominal voltage of 400 V	1.3 %	-	31.12.2021
0.5014	ex85087000ex85371098	2098	Electronic circuit cards that:are connected by wire or radio frequency to each other and the motor controller card, andregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)	0 %	p/st	31.12.2025
0.6856	ex85122000	30	Lighting module, containing at least:two LEDs,glass or plastic lenses, focusing/scattering the light emitted by the LEDs,reflectors redirecting the light emitted by the LEDs,in an aluminium housing with a radiator, mounted at a bracket with an actuator	0 %	p/st	31.12.2025
0.6863	ex85123090	20	Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holder,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2022
0.6689	ex85299065	28	Electronic assembly comprising at least:a printed circuit board with,one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,flash memory,operating memory,with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,sockets and plugs for connecting a LCD-display, a LED lighting and a control panel	0 %	p/st	31.12.2025
0.4893	ex85299065ex85299092	6553	Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module	0 %	p/st	31.12.2025
0.4890	ex85299092	25	LCD modules, not combined with touch screen facilities, solely consisting of:one or more TFT glass or plastic cells,a die cast heat sink,a backlight unit,one printed circuit board with micro controller, andLVDS (Low Voltage Differential Signalling) interface,for use in the manufacture of radios for motor vehicles	0 %	p/st	31.12.2025
0.6654	ex85299092	37	Fastening and covering ledges of aluminium alloy containing:silicon and magnesium,with a length of 300 mm or more but not more than 2200 mm,specifically shaped for use in the manufacture of TV sets	0 %	-	31.12.2025
0.6629	ex85299092	63	LCD modulewith a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,with or without a touch screen,with an LED backlight,with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,with a plug for power supply and CAN and LVDS interfaces,with or without electronic components for dynamic adjustments of colour,in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,suitable for installation in motor vehicles of Chapter 87	0 %	p/st	31.12.2025
0.5018	ex85299092	67	Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with or without a touch screen,with backlight, micro-controller,with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,whether or not with haptic and acoustical feedback,for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2025
0.6781	ex85299092	85	Colour LCD module in a housing:with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,without touch screen,with a backlight and micro-controller,with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,without a signal processing module,with control electronics for pixel addressing only,with a motorised mechanism for moving the display screen,for permanent installation in vehicles of Chapter 87	0 %	p/st	31.12.2025
0.6849	ex85366990	60	Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors	0 %	p/st	31.12.2022
0.5028	ex85366990	84	Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528	0 %	p/st	31.12.2025
0.6864	ex85371091	50	Fuse control module in a plastic housing with mounting brackets comprising:sockets with or without fuses,connecting ports,a printed circuit board with embedded microprocessor, micro switch and relay,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.6889	ex85371098	35	Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:2 rotary knobs27 or more pushbuttonsLED lights2 integrated circuits for receiving and sending of control signals via the LIN-bus	0 %	p/st	31.12.2025
0.6866	ex85389091ex85389099	2050	Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,a connection cable with a plug,at least two mounting brackets,whether or not PCB including integrated circuits, diodes and transistors,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.6710	ex85443000ex85444290	6050	Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87	0 %	-	31.12.2025
0.6867	ex85443000	85	Extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2025
0.6853	ex85444290	70	Electric conductors:of a voltage of not more than 80 V,with a length of not more than 120 cm,fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors	0 %	p/st	31.12.2025
0.6861	ex85444993	30	Electric conductors:of a voltage of not more than 80 V,of a platinum-iridium-alloy,coated with poly(tetrafluoroethylene),without connectors,for use in the manufacture of hearing aids, implants and speech processors	0 %	m	31.12.2025
0.5002	ex85459090	40	Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,a thickness of less than 600 μm,a weight of less than 500 g/m2	0 %	m2	31.12.2021
0.6707	ex87083010ex87083091	7040	Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.6869	ex87084020ex87084050	2010	Automatic hydrodynamic gearboxwith a hydraulic torque converter,without transfer box and cardan shaft,whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 87	0 %	p/st	31.12.2025
0.6648	ex87085020ex87085099	2010	Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middleof a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg	0 %	p/st	31.12.2025
0.6711	ex87088020ex87088035	1010	Upper strut insulator containing:a metal holder with three mounting screws, anda rubber bump,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2025
0.6859	ex87089120ex87089199	3030	Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:an insulating area flatness of not more than 0,1 mm,a permissible particle quantity of 0,3 mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4 mm, andnot more than 3 pores larger than 0,2 mm,of a kind used in heat exchangers for car cooling systems	0 %	p/st	31.12.2025
0.7716	ex87089135	20	Turbocharger cooling duct containing:an aluminium alloy duct with at least one metal holder and at least two mounting holes,a rubber pipe with clips,a stainless steel flange highly resistant to corrosion [SUS430JIL],for use in the manufacture of compression ignition engines of motor vehicles	0 %	-	31.12.2024
0.6687	ex87089510ex87089599	1020	Inflatable safety cushion of high strength polyamide fibre:sewn,folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming	0 %	p/st	31.12.2025
0.6688	ex87089510ex87089599	2030	Inflatable safety cushion of high strength polyamide fibre:sewn,folded,with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,suitable for cool inflator technology	0 %	p/st	31.12.2025
0.7581	ex87085020ex87085099	6015	Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:at least an actuator,whether or not an interior distribution by chain	0 %	-	31.12.2024
0.6686	ex87141090	10	Motorcycle fork rod inner tubes:of SAE1541 carbon steel,with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,having an elongation at break of 15 %,perforated	0 %	p/st	31.12.2025
0.6848	ex87141090	70	Motor bikes radiators in consignment of 100 pieces or more	0 %	p/st	31.12.2022
0.6879	ex87149610	10	Pedals, for use in the manufacture of bicycles (including electric bicycles)	0 %	-	31.12.2025
0.6878	ex87149990	30	Seat posts, for use in the manufacture of bicycles (including electric bicycles)	0 %	p/st	31.12.2025
0.4883	ex90019000	85	Light guide panel made of poly(methyl methacrylate):whether or not cut,whether or not printed,for use in the manufacture of backlight units for flat screen TVs	0 %	-	31.12.2025
0.7590	ex90021100	18	Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:a horizontal field of view range to a maximum of 120 deg,a diagonal field of view range to a maximum of 92 deg,a focal length to a maximum of 7,50 mm,a relative aperture of a maximum of F/2,90,a maximum diameter of 22 mm	0 %	-	31.12.2023
0.5692	ex90021100	20	Lenses:measuring not more than 95 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 3 or more times	0 %	-	31.12.2022
0.5025	ex94019080	10	Ratchet disk for use in the manufacture of reclining car seats	0 %	p/st	31.12.2025
0.4846	ex95030075ex95030095	1010	Plastic cable car scale models, whether or not with a motor, for printing	0 %	p/st	31.12.2025
0.6950	ex96072010	10	Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers	0 %	-	31.12.2022
0.6949	ex96072090	10	Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers	0 %	-	31.12.2025

----------------------

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).".

Serial Number	CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
"0.8021	28047010		Red phosphorus	0 %	-	31.12.2022
0.8022	28047090		Phosphorus, other than red phosphorus	0 %	-	31.12.2023
0.7974	ex29033919	40	3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more	0 %	-	31.12.2025
0.8017	ex29039980	25	2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.8018	ex29039980	35	2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.7957	ex29049900	55	2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more	0 %	-	31.12.2025
0.7963	ex29062900	70	1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.8015	ex29142900	35	4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.7955	ex29152400	10	Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.7980	ex29161995	60	Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)	0 %	-	31.12.2025
0.7940	ex29161995	70	Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more	0 %	-	31.12.2025
0.7931	ex29162000	25	Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more	0 %	-	31.12.2025
0.7933	ex29162000	35	2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.7929	ex29163990	16	3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.8008	ex29182900	40	3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %	0 %	-	31.12.2025
0.7934	ex29189990	43	Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more	0 %	-	31.12.2025
0.7947	ex29212900	70	N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more	0 %	-	31.12.2025
0.8019	ex29214900	45	2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.8020	ex29214900	55	2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.7946	ex29221900	29	N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more	0 %	-	31.12.2025
0.7935	ex29221900	70	2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.8000	ex29241900	18	2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.8013	ex29251995	40	N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more	0 %	-	31.12.2025
0.7985	ex29309098	88	1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more	0 %	-	31.12.2025
0.7951	ex29319000	25	N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.7958	ex29322090	18	4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.7984	ex29322090	23	1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more	0 %	-	31.12.2025
0.7978	ex29329900	68	3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.7930	ex29329900	73	5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.7936	ex29329900	78	Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.7954	ex29329900	83	6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.7938	ex29331990	43	tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.7937	ex29332990	23	1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.7976	ex29333999	83	2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.7925	ex29333999	84	Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.7981	ex29333999	86	3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.7939	ex29333999	87	6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.7986	ex29333999	88	Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more	0 %	-	31.12.2025
0.7952	ex29336980	33	2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more	0 %	-	31.12.2025
0.7927	ex29339980	60	2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more	0 %	-	31.12.2025
0.7971	ex29339980	70	5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.8014	ex29339980	80	Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more	0 %	-	31.12.2025
0.7926	ex29349990	65	Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more	0 %	-	31.12.2025
0.7944	ex29349990	70	1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more	0 %	-	31.12.2025
0.7928	ex29359090	44	4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more	0 %	-	31.12.2025
0.7943	ex32019020	10	Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less	0 %	-	31.12.2025
0.7975	ex38011000	10	Artificial graphite in powder form, (CAS RN 7782-42-5) with:a secondary particle structure which is aggregated from smaller primary particles,without coating on the surface,particle size represented by d50 value of 13,5 μm (± 0,5),specific surface area (measured by BET) less than 2,0 m2/g,tap density: 1,10 ~ 1,70 g/cm3,specific Discharge Capacity of 351,0 mAh/g (± 3,0),initial efficiency of 94,0 % (± 1,0)	1.8 %	-	31.12.2021
0.7994	ex38011000	20	Artificial graphite (CAS RN 7782-42-5) powder form, with:specific surface area (measured by BET) of 0,8 m2/g (± 0,25),tap density: 0,85 g/cm3 (± 0,10),particle size represented by d50 value of 21,0 μm (± 2,0),specific discharge capacity of 351,0 mAh/g (± 3,0),initial efficiency of 94,0 % (± 2,0)	1.8 %	-	31.12.2021
0.7998	ex38159090	38	Photoinitiator, containing by weight:80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate	0 %	-	31.12.2025
0.7999	ex38159090	48	Photoinitiator containing by weight:88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)	0 %	-	31.12.2025
0.7950	ex39029090	65	Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39	0 %	-	31.12.2025
0.7953	ex39100000	65	Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)	0 %	-	31.12.2025
0.8009	ex39119099	38	Mixture containing by weight:90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)	0 %	-	31.12.2025
0.8010	ex39119099	48	Mixture containing by weight:90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)	0 %	-	31.12.2025
0.7949	ex39206100	40	Extruded thermoplastic foils or films of polycarbonate with:matt surface texture on both sides,a thickness of more than 50 μm but not more than 200 μm,a width of 800 mm or more, but not more than 1500 mm, anda length of 915 m or more, but not more 2500 m,for use in the production of retroreflective products	0 %	-	31.12.2025
0.8011	ex39206219ex39206290	6820	Poly(ethylene terephthalate) film in rolls:with a thickness of 50 μm or more but not more than 350 μm, andcovered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm	0 %	-	31.12.2025
0.8005	ex39209928	48	Thermoplastic polyurethane foil in rolls, with:a width of 900 mm or more but not more than 1016 mm,a matt finish,a thickness of 0,4 mm (± 8 %),an elongation at break of 480 % or more (ASTM D412 (Die C)),a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),a Shore A hardness of 90 (± 3) (ASTM D2240),a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),a melting point of 165°C (± 10 °C)	0 %	-	31.12.2025
0.8024	ex56031410	20	Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2laminated on one side with a membrane or a membrane and aluminiumwith filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class Mpleatable	0 %	m2	31.12.2023
0.8028	ex69091900	40	Ceramic-carbon absorption cartridges with the following characteristics:extruded fired ceramic bound multicellular cylindrical structure,10 % or more by weight but not more than 35 % by weight of activated carbon,65 % or more by weight but not more than 90 % by weight of ceramic binder,with a diameter of 29 mm or more but not more than 41 mm,a length of not more than 150 mm,fired at temperature of 800 °C or more, andfor vapours adsorption,of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles	0 %	p/st	31.12.2025
0.7913	ex75062000	20	Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:a thickness of 0,5 mm or more but not more than 3 mm,a width of 250 mm or more but not more than 1219 mm	0 %	-	31.12.2025
0.7997	ex76169990	35	Aluminium plate with:a length of 36 mm or more but not more than 49 mm,a width of 29,8 mm or more but not more than 45,2 mm,a thickness of 0,18 mm or more but not more than 0,66 mm,equipped with a polypropylene tape with:a length of 6,5 mm or more but not more than 16,5 mm,a width of 39 mm or more but not more than 56 mm,characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,resistance to influence of electrolyte,for use in the manufacture of lithium-ion battery cells for motor vehicle batteries	3 %	-	31.12.2021
0.7966	ex81041900	10	Unwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium	0 %	-	31.12.2025
0.7942	ex81089030	35	Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm	0 %	-	31.12.2025
0.8012	ex84068200	10	Industrial steam turbine with:an output of 5 MW or more but not more than 40 MW,designed for a pressure of not more than 140 bar and a temperature of not more than 540 °C,equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar	0 %	-	31.12.2025
0.7961	ex84099100ex84819000	5560	Nozzle body for the regulation of angle and distribution of fuel injection:of a cylindrical shape,made of stainless steel,with 4 or more, but not more than 16 holes,with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute	0 %	-	31.12.2025
0.7965	ex84099100	75	Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:an inlet diameter of 2 mm or more, but not more than 10 mm,an outlet diameter of 2 mm or more, but not more than 10 mm,an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,a plastic covering moulded around a stainless steel tube	0 %	-	31.12.2025
0.7967	ex84099100ex84819000	8070	Nozzle needle for opening and closing the flow of fuel in the engine, with:2 holes,4 grooves,a diameter of 3 mm or more, but not more than 6 mm,a length of 25 mm or more, but not more than 35 mm,made of stainless steel with hard-chrome plating	0 %	-	31.12.2025
0.7969	ex84133020	40	High-pressure plunger pump for direct diesel injection, with:an operating pressure of not more than 275 MPa,a camshaft,a fluid discharging of 15 cm3 per minute or more, but not more than 1800 cm3 per minute,an electric pressure regulating valve	0 %	-	31.12.2025
0.7970	ex84133020	50	High-pressure plunger pump for direct diesel injection:with an operating pressure of not more than 275 MPa,designed to contact the crankshaft,with an electromagnetic valve	0 %	-	31.12.2025
0.7996	ex84189990	20	Aluminium connecting block for connecting to a condenser manifold in welding process:hardened to T6 or T5 temper,with a weight of not more than 150 g,with a length of 20 mm or more but not more than 150 mm,with a fixing rail in one piece	0 %	-	31.12.2025
0.8004	ex84189990	30	Receiver dryer profile for connecting to a condenser manifold in welding process with:a braze flatness of not more than 0,2 mm,a weight of 100 g or more but not more than 600 g,a fixing rail in one piece	0 %	-	31.12.2025
0.7979	ex84798997	55	Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode	0.8 %	-	31.12.2021
0.7982	ex84798997	65	Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line	0.8 %	-	31.12.2021
0.7964	ex84799070	40	Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:of a circular shape,made of steel alloy with sintering process,with not more than 8 oil chambers,with a Rockwell hardness of 55 or more,with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3	0 %	-	31.12.2025
0.7968	ex84813091ex84813099	3050	Mechanical check (non-return) valve for opening and closing of the flow of fuel:with an operating pressure of not more than 250 MPa,with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,made of steel	0 %	-	31.12.2025
0.7960	ex84818059ex84819000	7080	Flow-control valvemade of steel,with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm	0 %	-	31.12.2025
0.7972	ex85272900ex85299065	1038	Satellite radio receiver module:with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm,comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,being able to process radio frequency signals,with a medium frequency unit,for use in the manufacture of products falling under heading 8527	0 %	-	31.12.2025
0.7987	ex87085020ex87085055	1550	Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened	0 %	-	31.12.2025
0.7988	ex87085020ex87085099	2545	Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:6 ball tracks or more but not more than 8, witha thread,an external involute spline with 21 or more but not more than 38 teeth,for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,forged, turned, milled and hardened	0 %	-	31.12.2025
0.7989	ex87085020ex87085099	3550	Inboard constant velocity joint tripod housing, with:an outer diameter of 67,0 mm or more but not more than 99,0 mm,3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,an external spline with 21 teeth or more but not more than 41,forged, turned, rolled and hardened	0 %	-	31.12.2025
0.7990	ex87085020ex87085099	4555	Outboard constant velocity joint inner race, part of the vehicle’s drive system, with:6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,forged, turned, milled, broached and hardened	0 %	-	31.12.2025
0.7991	ex87085020ex87085099	5560	Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,forged, turned, broached and hardened	0 %	-	31.12.2025
0.7973	ex90021100	23	Lenses with:motorized focus, zoom, aperture,electronically switchable infrared cut filter,an adjustable focal length not less than 2,7 mm and not more than 55 mm,a weight of not more than 100 g,a length of less than 70 mm,a diameter of not more than 60 mm	0 %	-	31.12.2025

----------------------

Amendments and corrections
December 31, 2021	Implicitly repealed by 32021R2278
January 1, 2021	Application - See Art 2
December 29, 2020	Entry into force - Date pub. +1 See Art 2

Council Regulation (EU) 2020/2231 of 18 December 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products