Article 1Implementing Regulation (EU) 2018/1261 is amended as follows:(1)in Article 1, "HYPRED SAS" is replaced by "HYPRED SAS – KERSIA Group";(2)the Annex is replaced by the Annex to this Regulation.

Article 2This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 4 December 2020.For the CommissionThe PresidentUrsula von der LeyenANNEXSummary of product characteristics for a biocidal product familyHYPRED's iodine based productsProduct type 3 - Veterinary hygiene (Disinfectants)Authorisation number: EU-0018397-0000R4BP asset number: EU-0018397-0000PART IFIRST INFORMATION LEVEL1.ADMINISTRATIVE INFORMATION1.1.Family name

Name	HYPRED's iodine based products

1.2.Product type(s)

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

1.3.Authorisation holder

Name and address of the authorisation holder	Name	HYPRED SAS – KERSIA Group
	Address	55, Boulevard Jules Verger - BP10180 35803 DINARD Cedex France
Authorisation number	EU-0018397-0000
R4BP asset number	EU-0018397-0000
Date of the authorisation	11 October 2018
Expiry date of the authorisation	30 September 2028

1.4.Manufacturer(s) of the biocidal products

Name of manufacturer	HYPRED SAS – KERSIA Group
Address of manufacturer	55, Boulevard Jules Verger - BP10180 35803 DINARD France
Location of manufacturing sites	HYPRED SAS – KERSIA Group - 55, Boulevard Jules Verger - BP10180 35803 DINARD FranceKERSIA POLSKA Sp.z.o.o. - NIEPRUSZEWO, KASZTANOWA 4 64320 Buk PolandKERSIA IBERICA SL - Pol. Miguel Eguía C/Zarapuz s/n31200 ESTELLA (NAVARRA) SpainKERSIA DEUTSCHLAND GmbH Marie-Curie-Straße 23 53332 Bornheim – Sechtem GermanyHYPRED Italia s.r.l. – KERSIA Group Strada Montodine-Gombito Loc. Cà Nova 26010 Ripalta Arpina CR ItalyAG France S.A.S – KERSIA Group - Zone Industrielle Le Roineau, 72500 VAAS, FRANCEKERSIA DEUTSCHLAND GmbH - OBERBRÜHLSTRAßE 16-18, 87700 MEMMINGEN, GERMANYKERSIA AUSTRIA GmbH - PFONGAUERSTRAßE 17, 5202 NEUMARKT AM WALLERSEE, AUSTRIAKilco Holdings Ltd – KERSIA Group - Broomhouses 2 Industrial Estate, Old Glasgow Road, LOCKERBIE - DG11 2SD, UNITED KINGDOMKilco (International) Ltd – KERSIA Group - 1A Trench Road Mallusk, Newtownabbey, CO ANTRIM BT36 4TY, IRELANDMedentech Ltd – KERSIA Group - Clonard Road, WEXFORD, Y35Y7WY, IRELAND

1.5.Manufacturer(s) of the active substance(s)

Active substance	Iodine
Name of manufacturer	COSAYACH : SCM Cía. Cosayach Minera Negreiros, Rut. N°96.625.710-5
Address of manufacturer	Terrenos de Elena S/N Terrenos de Elena S/N Huara, Región de Tarapacá Chile
Location of manufacturing sites	Mined at: S.C.M. Cía. Minera Negreiros, S.C.M. Cosayach Soledad.Refined at: S.C.M. Cía. Minera Negreiros. Pozo Almonte Chile

Active substance	Iodine
Name of manufacturer	ACF MINERA SA
Address of manufacturer	San Martín 499 Iquique Chile
Location of manufacturing sites	Faena Lagunas KM. 1.722 Ruta A-5, Pozo Almonte Chile

Active substance	Iodine
Name of manufacturer	SOCIEDAD QUIMICA y MINERA SA
Address of manufacturer	Los Militares 4290 SANTIAGO DE CHILE Chile
Location of manufacturing sites	Pedro de Valdivia (PV) Route B 180 Antofagasta ChileNueva Victoria (NV) Route 5 North, Km 1925 Pozo Almonte Chile

Active substance	Iodine
Name of manufacturer	ISE Chemicals Corporation
Address of manufacturer	3-1, Kyobashi 1-Chome, Chuo-ku, Tokyo Japan
Location of manufacturing sites	Shirasato Plant (3695 Kitaimaizumi, Oamishirasato City, Chiba, Japan)

Active substance	Iodine
Name of manufacturer	Nihon Tennen Gas Development Co., Ltd
Address of manufacturer	661 Mobara 297-8550 Mobara City, Chiba Japan
Location of manufacturing sites	Chiba Plant, 2508 Minami Hinata, 299-4205 Shirako-Machi, Chosei-Gun, Chiba Japan

2.PRODUCT FAMILY COMPOSITION AND FORMULATION2.1.Qualitative and quantitative information on the composition of the family

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,25	2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		2,697	24,199

2.2.Type(s) of formulation

Formulation(s)	AL - Any other liquidSL - Soluble concentrate

PART IISECOND INFORMATION LEVEL - META SPC(S)META SPC 11.META SPC 1 ADMINISTRATIVE INFORMATION1.1.Meta SPC 1 identifier

Identifier

meta SPC 1 : Dipping products - ready to use

1.2.Suffix to the authorisation number

Number

1-1

1.3.Product type(s)

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

2.META SPC 1 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 1

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,25	0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		2,697	4,993

2.2.Type(s) of formulation of the meta SPC 1

Formulation	AL - Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1

Hazard statements	Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements	Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.

4.AUTHORISED USE(S) OF THE META SPC 14.1.Use description

Table 1. Use # 1 – Manual or automated dipping after milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	BacteriaYeastsAlgae
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping after milking
Application method(s)	Dipping -Manual or automated disinfection of teats by dipping after milking.Dipping cup or automated dipping machine.
Application rate(s) and frequency	cows and buffaloes (3 to 10ml : 5 ml recommended)sheep (1.5 to 5 ml : 1.5 ml recommended)goats (2.5 to 6 ml : 2.5 ml recommended)Frequency : 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.1.1.Use-specific instructions for useSee general directions for use of meta SPC 14.1.2.Use-specific risk mitigation measuresSee general directions for use of meta SPC 14.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 14.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingNone: See general directions for use of meta SPC 14.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 15.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC1. OF THE META SPC 15.1.Instructions for useAlways read the label or leaflet before use and follow all the instructions provided.The product must be brought to a temperature above 20°C before use.The use of a dosing pump for filling the product into the application equipment is recommended.Fill the dipping cup manually or automatically with the ready to use product.Apply by dipping manually or automatically on animal's teats on the full length of the teat after milking.cows and buffaloes (3 to 10ml : 5 ml recommended)sheep (1.5 to 5 ml : 1.5 ml recommended)goats (2.5 to 6 ml : 2.5 ml recommended)Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.Where necessary, repeat the application after each milking.Clean the application equipment regularly with warm water.5.2.Risk mitigation measuresWear eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentTake the contaminated clothes and shoes off immediately. Wash them before wearing them again.FIRST AID INSTRUCTIONSIn the event of inhalation: Bring to fresh air.In the event of contact with the skin: Wash with water.In the event of contact with the eyes :IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.Refer to the safety data sheet available for professional user: it contains an emergency phone number.Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageShelf life : 2 years in HDPEDo not store at a temperature higher than 30°C.6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 17.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Dip-io 2500JOD DIPIODERM PSPDERMINO FRIododipIODEX EXTRAIodystrongDERMIODEINO IODE EPAISINO STAR +IODACTIV 2500IODIUM BX2500Usual Iod PostASiRAL Dip CoatIODOCAN EXTRAUDDER PLUSPRIMADIODECERTIODE EPAISIODIPACK GELHELIO IODE EPAISVAGELGELAPIS ACTIVIOSAPIS GELZENCARE FLASHREPROGELDERMADINE +KRONI Jod Dipp 2500WÜBBELMANN JOD DIPIodine Cleaner&SanitizerMUNGIFILMZEP FS FILMIODINE NIPPLE NPIODOFILMEMPRASAN UDDER SHIELDANGLIA FARMERS IO-FILMBARRICADESTANTON IODOFILMWYNNSAN IOFILM TEAT DIP
Authorisation number	EU-0018397-0001 1-1
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,25
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		2,697

7.2.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Dip-io YB MAXINO Io Dip MAXJOD DIP YB MAXIodoDip YB MAXIodium Dip YB MAXJodyDip YB MAXDelta IoDip YB MAX
Authorisation number	EU-0018397-0002 1-1
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		4,993

META SPC 21.META SPC 2 ADMINISTRATIVE INFORMATION1.1.Meta SPC 2 identifier

Identifier

meta SPC 2 : Dipping, foaming, spraying products - Ready to use

1.2.Suffix to the authorisation number

Number

1-2

1.3.Product type(s)

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

2.META SPC 2 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 2

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,25	0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		2,697	4,69

2.2.Type(s) of formulation of the meta SPC 2

Formulation	AL - Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2

Hazard statements	Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements	Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.

4.AUTHORISED USE(S) OF THE META SPC 24.1.Use description

Table 2. Use # 1 – Manual or automated dipping, foaming or spraying before milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	BacteriaYeasts
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s)	Dipping, foaming or spraying before milking -Manual or automated disinfection of teats by dipping, foaming or spraying before milkingDipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	cows and buffaloes (3 to 10ml : 5 to 8 ml recommended)sheep (1.5 to 5 ml : 1.5 to 3ml recommended)goats (2.5 to 6 ml : 2.5 to 4 ml recommended)Frequency : 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.1.1.Use-specific instructions for useEliminate all visible dirt before applying the product.Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat before milking.Let the product act at least one minute.Use the teat cleaning and wiping method systematically before attaching the milking cluster.See also general instructions for use of meta SPC 2.4.1.2.Use-specific risk mitigation measuresFor manual dipping/foaming application: Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/ eye protection.For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing /eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 24.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 24.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 24.2.Use description

Table 3. Use # 2 – Manual or automated dipping, foaming or spraying after milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	BacteriaYeastsAlgae
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s)	Dipping, foaming, spraying after milking -Manual or automated disinfection of teats by dipping, foaming or spraying after milkingDipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	cows and buffaloes (3 to 10ml : 5 to 8 ml recommended)sheep (1,5 to 5 ml : 1,5 to 3ml recommended)goats (2,5 to 6 ml : 2,5 to 4 ml recommended)Frequency : 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.2.1.Use-specific instructions for useManual or automatic dipping / foaming / spraying on animal's teats on the full length of the teat after milking.Leave the product until next milking. Keep the cows standing until the product has dried. (at least 5 minutes)At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.See also general instructions for use of meta SPC 2.4.2.2.Use-specific risk mitigation measuresFor manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing /eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 24.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 24.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 25.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC2. OF THE META SPC 25.1.Instructions for useSee use-specific instructions for each use.Always read the label or leaflet before use and follow all the instructions provided.The product must be brought to a temperature above 20°C before use.The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product.Where necessary repeat the application at each milkingClean the application equipment regularly with warm water.5.2.Risk mitigation measuresSee use-specific risk mitigation measures for each use.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentTake the contaminated clothes and shoes off immediately. Wash them before wearing them again.FIRST AID INSTRUCTIONSIn the event of inhalation: Bring to fresh air.In the event of contact with the skin: Wash with water.In the event of contact with the eyes :IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.Refer to the safety data sheet available for professional user: it contains an emergency phone number.Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageShelf life : 2 years in HDPEDo not store at a temperature higher than 30°C.6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 27.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Liq-io 2500JOD SPRAYIODINE 3000 RTUIODEX 2500Usual Iod LiquidIodoliquidIodosprayDESINTEATIODYSPRAYRBT 2500IODY’FLASHINO IODE SPRAYIODYPRO 2500IODYPRO BL2500Robot Liq-io 25ADF iDip+ASiRAL Dip Spray JIODIPACKHELIO IODE LIQUIDEPOLY-IODECERTIODE LIQUIDEIOSAPIS FLUIDGELAPIS ROBOTZENCARE SPRAYHELIO IODE SPRAY +IODIP +KRONI Jod Spray 2500WÜBBELMANN JOD LIQUIDPRECEPTANGLIA FARMERS PRECLENZH&M PREDIPFULLWOOD PRECLEANSEM WILLIAMS PRECEPTSTANTON PREDIP RTUWYNNSAN IODINE PREDIP RTUPREMIER GOLD PRE-DIPHODGES & MOSS PREDIPLANODIP PREPOSTDAIRYSAN MULTICAREEMPRASAN ADVANCEUDDERWASH IODINEANGLIA FARMERS PREPOST-IOPREMIER GOLD PRE/POSTFULLWOOD PRE/POST IODINEHODGES & MOSS ADVANCEWYNNSAN IODINE PREPOST
Authorisation number	EU-0018397-0003 1-2
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,25
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		2,697

7.2.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Liq-io YB MAXINO Io Liquid MaxIodoliquid YB MAXIodospray YB MAXDesinteat YB MAXIodium Spray YB MAXJodySpray YB MAXDelta IoSpray YB MAX
Authorisation number	EU-0018397-0004 1-2
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		4,69

META SPC 31.META SPC 3 ADMINISTRATIVE INFORMATION1.1.Meta SPC 3 identifier

Identifier

meta SPC 3 : Dipping, foaming, spraying concentrated products

1.2.Suffix to the authorisation number

Number

1-3

1.3.Product type(s)

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

2.META SPC 3 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 3

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Iodine		Active substance	7553-56-2	231-442-4	2,5	2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		24,199	24,199

2.2.Type(s) of formulation of the meta SPC 3

Formulation	SL - Soluble concentrate

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3

Hazard statements

Causes serious eye damage.May cause damage to organs (thyroid) through prolonged or repeated exposure oral.Toxic to aquatic life with long lasting effects.May be corrosive to metals.

Precautionary statements

Keep out of reach of children.Do not breathe mist.Do not breathe vapours.Do not breathe spray.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a poison center / doctor.Get medical advice/attention if you feel unwell.Dispose of contents to in accordance with local/ regional/ national/ international regulations. Dispose of container to in accordance with local/ regional/ national/ international regulations.Keep only in original container.Absorb spillage to prevent material damage.

4.AUTHORISED USE(S) OF THE META SPC 34.1.Use description

Table 4. Use # 1 – Manual or automated dipping, foaming or spraying before milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use
Target organism(s) (including development stage)	BacteriaYeasts
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s)	Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying before milking.Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	A dilution at 10% (v/v) should be preparedApplication rate for the diluted product:cows and buffaloes (3 to 10ml : 5 to 8 ml recommended)sheep (1.5 to 5 ml: 1.5 to 3 ml recommended)goats (2.5 to 6 ml: 2.5 to 4 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.1.1.Use-specific instructions for usePrepare a dilution at 10% (v/v: 10 ml product, add water up to 100ml) for bactericidal and yeasticidal activity.Fill the dipping / foaming cup / sprayer manually or automatically with the prepared dilution.Eliminate all visible dirt before applying the product.Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat before milking.Let the product act at least one minute.Use the teat cleaning and wiping method systematically before attaching the milking cluster.See also general directions for use of meta SPC 3.4.1.2.Use-specific risk mitigation measuresFor manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing /eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 34.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 34.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 34.2.Use description

Table 5. Use # 2 – Manual or automated dipping, foaming or spraying after milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	BacteriaYeastsAlgaeViruses
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s)	Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying after milking.Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	For disinfection of bacteria, yeasts and algae a dilution at 10% (v/v: 10 ml product, add water up to 100ml) should be prepared.For disinfection of viruses a dilution at 20% (v/v: 20 ml product, add water up to 100ml) should be preparedApplication rate for the diluted product:cows and buffaloes (3 to 10ml : 5 to 8 ml recommended)sheep (1,5 to 5 ml : 1,5 to 3ml recommended)goats (2,5 to 6 ml : 2,5 to 4 ml recommended)Frequency : 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.2.1.Use-specific instructions for usePrepare a dilution at 10% (v/v: 10 ml product, add water up to 100ml) for bactericidal, yeasticidal and algaecidal activity or 20% (v/v: 20 ml product, add water up to 100ml) in case virucidal activity is also needed.Fill the dipping / foaming cup / sprayer manually or automatically with the prepared dilution.Manual or automatic dipping / foaming / spraying on animal's teats on the full length of the teat after milking.Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.See also general directions for use of meta SPC 34.2.2.Use-specific risk mitigation measuresFor manual spraying applications wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) /protective clothing/eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 34.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 34.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 35.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC3. OF THE META SPC 35.1.Instructions for useSee use-specific instructions for each use.Always read the label or leaflet before use and follow all the instructions provided.The product must be brought to a temperature above 20°C before use.The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping / foaming cup / sprayer manually or automatically with the prepared dilution.Where necessary, repeat the application at each milkingClean the application equipment regularly with warm water.5.2.Risk mitigation measuresSee use-specific risk mitigation measures for each use.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentTake the contaminated clothes and shoes off immediately. Wash them before wearing them again.In case of faintness, get medical advice/attention. Show this safety data sheet to the doctor.FIRST AID INSTRUCTIONSIn the event of inhalation: Bring to fresh air.In the event of contact with the skin: Wash with water.In the event of contact with the eyes: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open.Remove contact lenses if present and easy to do. Continue rinsing.Immediately call a POISON CENTER or doctor/physician.In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.Refer to the safety data sheet available for professional user: it contains an emergency phone number.Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageShelf life : 2 years in HDPEDo not store at a temperature higher than 30°C.6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 37.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Liq-io concentrateINO Jod KonzentratUsual Iod ConcentIodoconcentratD 10 IODINED 5 IODINELiq-io CINO IODE CD 4 IODINEADF iDip+ concentrateMammizan ConcentréWYNNSAN IODINE CONCENTRATEEMPRASAN OPTIMAANGLIA FARMERS CONCPROLAC SENTINEL CONCPREMIER GOLD CONCENTRATEFULLWOOD IODINE CONCH&M OPTIMASENTINAL CONCHARRY TRAVIS SUPER CONC TEAT DIPLANODIP CONCE/SAN SOVEREIGNPROLAC SENTINEL CONC
Authorisation number	EU-0018397-0005 1-3
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		24,199

META SPC 41.META SPC 4 ADMINISTRATIVE INFORMATION1.1.Meta SPC 4 identifier

Identifier

meta SPC 4 : Dipping products reaching virucidal activity – Ready to use

1.2.Suffix to the authorisation number

Number

1-4

1.3.Product type(s)

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

2.META SPC 4 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 4

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,5	0,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		4,993	4,993

2.2.Type(s) of formulation of the meta SPC 4

Formulation	AL - Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4

Hazard statements	Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements	Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.

4.AUTHORISED USE(S) OF THE META SPC 44.1.Use description

Table 6. Use # 1 – Manual or automated dipping after milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	BacteriaYeastsAlgaeViruses
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping after milking
Application method(s)	Dipping -Manual or automated disinfection of teats by dipping after milking.Dipping cup or automated dipping machine.
Application rate(s) and frequency	cows and buffaloes (3 to 10ml : 5 ml recommended)sheep (1,5 to 5 ml : 1,5 ml recommended)goats (2,5 to 6 ml : 2,5 ml recommended)Frequency : 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.1.1.Use-specific instructions for useSee general directions for use of meta SPC 44.1.2.Use-specific risk mitigation measuresSee general directions for use of meta SPC 44.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 44.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 44.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 45.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC4. OF THE META SPC 45.1.Instructions for useAlways read the label or leaflet before use and follow all the instructions provided.The product must be brought to a temperature above 20°C before use.The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping cup manually or automatically with the ready to use product.Apply by dipping manually or automatically on animal's teats on the full length of the teat after milking.cows and buffaloes (3 to 10ml : 5 ml recommended)sheep (1,5 to 5 ml : 1,5 ml recommended)goats (2,5 to 6 ml : 2,5 ml recommended)Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.Where necessary, repeat the application after each milking.Clean the application equipment regularly with warm water.5.2.Risk mitigation measuresWear eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentTake the contaminated clothes and shoes off immediately. Wash them before wearing them again.FIRST AID INSTRUCTIONSIn the event of inhalation: Bring to fresh air.In the event of contact with the skin: Wash with water.In the event of contact with the eyes :IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.Refer to the safety data sheet available for professional user: it contains an emergency phone number.Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageShelf life : 2 years in HDPEDo not store at a temperature higher than 30°C.6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 47.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Dip-io 5000IODIUM TXINO JOD 50 DIPUsual Iod Post +IODIUM PRO DIPIODERM PSP +IODEX EXTRA +Iododip +IODYSTRONG PLUSINO TREMPINO STARIODACTIV 5000DERMINOIODERM 5000IODIUM BX5000HOEVE-PLUS DIPTREMPASEPT IODEDERMADINEMAMMO-DERMKRONI Jod Dipp 5000
Authorisation number	EU-0018397-0006 1-4
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		4,993

META SPC 51.META SPC 5 ADMINISTRATIVE INFORMATION1.1.Meta SPC 5 identifier

Identifier

meta SPC 5 : Dipping, foaming, spraying products 5500 ppm – Ready to use

1.2.Suffix to the authorisation number

Number

1-5

1.3.Product type(s)

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

2.META SPC 5 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 5

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,55	0,55
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		4,69	4,69

2.2.Type(s) of formulation of the meta SPC 5

Formulation	AL - Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5

Hazard statements	Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements	Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.

4.AUTHORISED USE(S) OF THE META SPC 54.1.Use description

Table 7. Use # 1 – Manual or automated dipping, foaming or spraying before milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use
Target organism(s) (including development stage)	BacteriaYeasts
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s)	Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying before milkingDipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	cows and buffaloes (3 to 10ml : 5 to 8 ml recommended)sheep (1,5 to 5 ml : 1,5 to 3ml recommended)goats (2,5 to 6 ml : 2,5 to 4 ml recommended)Frequency : 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.1.1.Use-specific instructions for useFill the dipping / foaming cup / sprayer manually or automatically with the ready to use product.Eliminate all visible dirt before applying the product.Manual or automatic dipping / foaming / spraying on animal's teats on the full length of the teat before milking.Let the product act at least one minute.Use the teat cleaning and wiping method systematically before attaching the milking cluster.See also general instructions for use of meta SPC5.4.1.2.Use-specific risk mitigation measuresFor manual dipping/foaming application : Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/ eye protection.For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing /eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 54.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 54.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 54.2.Use description

Table 8. Use # 2 – Manual or automated dipping, foaming or spraying after milking

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	BacteriaYeastsAlgaeViruses
Field(s) of use	IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s)	Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying after milking.Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine.
Application rate(s) and frequency	cows and buffaloes (3 to 10ml : 5 to 8 ml recommended)sheep (1,5 to 5 ml : 1,5 to 3ml recommended)goats (2,5 to 6 ml : 2,5 to 4 ml recommended)Frequency : 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1000L

4.2.1.Use-specific instructions for useFill the dipping / foaming cup / sprayer manually or automatically with the ready to use product.Manual or automatic dipping / foaming / spraying on animal's teats on the full length of the teat after milking.Leave the product until next milking. Keep the cows standing until the product has dried. (at least 5 minutes)At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.See also general instructions for use of meta SPC 5.4.2.2.Use-specific risk mitigation measuresFor manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing/eye protection.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 54.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 54.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 55.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC5. OF THE META SPC 55.1.Instructions for useSee use-specific instructions for each use.Always read the label or leaflet before use and follow all the instructions provided.The product must be brought to a temperature above 20°C before use.The use of a dosing pump for filling the product into the application equipment is recommended.Where necessary repeat the application at each milkingClean the application equipment regularly with warm water.5.2.Risk mitigation measuresSee use-specific risk mitigation measures for each use.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentTake the contaminated clothes and shoes off immediately. Wash them before wearing them again.FIRST AID INSTRUCTIONSIn the event of inhalation: Bring to fresh air.In the event of contact with the skin: Wash with water.In the event of contact with the eyes :IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.Refer to the safety data sheet available for professional user: it contains an emergency phone number.Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageShelf life : 2 years in HDPEDo not store at a temperature higher than 30°C.6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 57.1.Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Liq-io 5500IODYPROINO JOD 50 LiquidUsual Iod Liquid +IODIUM PRO SPRAYIODEXIodoliquid +Iodospray PlusDESINTEAT PLUSROBOSPRAY IODEINOTRAYONIODYPRO 5500Robot Liq-io 55IODYPRO BL5500ADF iDip+ 5500HOEVE-JODIUM SPRAYGRUPAIODEIODOCANJOFOJODI PLUSK-AGRO PRODIP IDIODIPHELIO IODE SPRAYMAMMO-JODKRONI Jod Spray 5500MUNGI-IODLELY QUARESS-IodineGOLD GLYCODIPEMPRASAN EXTRA CAREH&M RTU IODINEANGLIA FARMERS SUPPLEDIP-IOPROLAC RTU IODINE TEAT DIPPREMIER GOLD POST DIPFULLWOOD IODINE EXTRAH&M EXTRACAREM WILLIAMS TEAT DIPPLATINUMWDH GOLD DIP RTUWYNNSAN IODINE HE RTU
Authorisation number	EU-0018397-0007 1-5
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,55
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy	Non active substance	68439-50-9		4,69