Article 1The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.

Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2020.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 15 June 2020.For the CouncilThe PresidentA. Metelko-ZgombićANNEXThe Annex to Regulation (EU) No 1387/2013 is amended as follows:(1)all asterisks (*) and the related endnote containing the text "A newly introduced measure or a measure with amended conditions. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure." are deleted;(2)the entries with the serial numbers 0.2706, 0.2972, 0.3650, 0.3886, 0.3894, 0.3895, 0.4004, 0.4039, 0.4177, 0.4647, 0.4648, 0.4751, 0.5504, 0.5615, 0.5929, 0.6601, 0.6745, 0.7784 and 0.7803 are deleted;(3)the following entries replace those entries that have the same serial numbers:

Serial number	CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
"0.7288	ex28415000	11	Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more	2 %	-	31.12.2021
0.3419	ex28500020	80	Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more	0 %	-	31.12.2024
0.2583	ex29038980	45	1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more	2 %	-	31.12.2021
0.2942	ex29199000	35	2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100 μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique	0 %	-	31.12.2023
0.5037	ex29224985	17	Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)	0 %	-	31.12.2020
0.3689	ex29241900	23	Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more	2 %	-	31.12.2021
0.6259	ex29269070	26	Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products	0 %	-	31.12.2024
0.2656	ex29313990	38	N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more	0 %	-	31.12.2024
0.7811	ex29331990	33	Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine	0 %	-	31.12.2024
0.4346	ex29342080	25	1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one	0 %	-	31.12.2022
0.5134	ex32041100	45	Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)	0 %	-	31.12.2020
0.7318	ex36030060	10	Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 29,4 mm and a pin length of 6,68 mm (±0,3 mm) or more but not more than 7,54 mm (±0,3 mm)	0 %	-	31.12.2022
0.5718	ex38112100	85	Additives:containing more than 20 % or more but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,for use in the manufacture of blends of additives	0 %	-	31.12.2022
0.7512	ex38112900	18	Additives consisting of dihydroxy butanedioic acid – (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils	0 %	-	31.12.2023
0.3069	ex38249992	88	2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)	0 %	-	31.12.2020
0.4719	ex38249993	35	Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)	0 %	-	31.12.2024
0.6953	ex39014000	20	Octene linear low-density polyethylene (LLDPE) in the form of pellets with:10 % or more but not more than 20 % by weight of octene,a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),a melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,a gel area per 24,6 cm3 of not more than 20 mm2, andan anti-oxidant level of not more than 240 ppm	0 %	m3	31.12.2020
0.5161	ex39191080ex39199080	7075	Rolls of polyethylene foil:self-adhesive on one side,of a total thickness of 0,025 mm or more, but not more than 0,09 mm,of a total width of 60 mm or more, but not more than 1110 mm,for use in the manufacture of products of Headings 8521 or 8528 for protection purposes	0 %	-	31.12.2021
0.4947	ex39199080	65	Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner	0 %	-	31.12.2024
0.3241	ex39201025	30	Mono-layered high-density polyethylene film:containing by weight 99 % or more of polyethylene,with a thickness of 12 μm or more but not more than 20 μm,with a length of 4000 m or more but not more than 7000 m,with a width of 600 mm or more but not more than 900 mm	0 %	-	31.12.2023
0.3312	ex39219060	35	Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells	0 %	-	31.12.2023
0.6708	ex40094200	20	Rubber brake hose with:textile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,for use in the manufacture of goods of Chapter 87	0 %	-	31.12.2024
0.7372	ex53110090	10	Plain-woven fabric of paper yarns glued on a tissue paper layer:with a weight of 190 g/m2 or more but not more than 280 g/m2, andcut into rectangles with a side length of 40 cm or more but not more than 140 cm	0 %	-	31.12.2022
0.2546	ex69039090	30	Silicon carbide reactor tubes and holders having a softening point of 1400 °C or higher	0 %	-	31.12.2023
0.7619	ex70060090	40	Plates of sodalime glass of STN (Super Twisted Nematic) quality having:a length of 300 mm or more but not more than 1500 mm,a width of 300 mm or more but not more than 1500 mm,a thickness of 0,5 mm or more but not more than 1,1 mm,an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,with or without a multilayer anti-reflection-coating on the other side and machined (chamfered) edges	0 %	-	31.12.2023
0.7341	ex74130000	20	Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed	0 %	-	31.12.2022
0.3928	ex76169990	15	Honeycomb aluminium blocks for use in the manufacture of aircraft parts	0 %	p/st	31.12.2023
0.6730	ex81019600	10	Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μm,a resistance of 40 Ω or more but not more than 300 Ω at length of 1 m	0 %	-	31.12.2020
0.5838	ex81059000	10	Bars or wires made of cobalt alloy containing by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium, and7 % (± 2 %) iron,conforming to the material specifications AMS 5842	0 %	-	31.12.2023
0.5570	ex82073010	10	Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles	0 %	p/st	31.12.2022
0.5024	ex83016000ex84199085ex84799070ex84819000ex85030099ex85159080ex85371098ex85389099ex87089910ex87089997	30403050434055705522	Silicone or plastic keyboards, comprising:parts of common metal, andwhether or not comprising parts of plastic,epoxy resin reinforced with fibreglass or wood,whether or not printed or surface-treated,with or without electrical conductors,with or without a membrane bonded to the keyboard,with or without mono or multilayer protective film	0 %	p/st	31.12.2020
0.7670	ex84099100	25	Air intake module for engine cylinders consisting of:a suction pipe,a pressure sensor,an electric throttle,hoses,brackets,for use in the manufacture of engines of motor vehicles	0 %	-	31.12.2023
0.7718	ex84099900	75	High pressure fuel rail of galvanised ferrite-pearlite steel with:at least one pressure sensor and one valve,a length of 314 mm or more, but not more than 322 mm,an operating pressure not more than 225 MPa,an inlet temperature not more than 95 °C,ambient temperature of – 45 °C or more, but not more than 145 °C,for use in the manufacture of compression ignition engines of motor vehicles	0 %	-	31.12.2024
0.7377	ex84818059	40	Flow-control valve:made of steel,with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,with chromium nitride coating,with a surface roughness of Rp 0,4	0 %	-	31.12.2022
0.7381	ex84818059	50	Electromagnetic valve for quantity control with:a plunger,a solenoid with a of coil resistance of 1,85 Ω or more, but not more than 8,2 Ω	0 %	-	31.12.2022
0.7604	ex84842000	20	Mechanical face sealing device made of two movable rings (one ceramic mating with a thermal conductivity lower than 80 W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side	0 %	-	31.12.2023
0.5577	ex85013100	50	DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 9 V or more, but not more than 16 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without a rotor angle position sensor of resolver type or Hall effect type,with or without a pulley,of the kind used in power steering systems for cars	0 %	-	31.12.2022
0.4855	ex85013300ex85014080ex85015350	305010	Electric drive for motor vehicles, with an output of not more than 315 kW:with an AC or DC motor with or without transmission,with or without power electronics	0 %	-	31.12.2021
0.5783	ex85030099	40	Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 8501	0 %	p/st	31.12.2022
0.7029	ex85051100	47	Articles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:a length of 9 mm or more but not more than 105 mm,a width of 5 mm or more but not more than 105 mm, anda height of 2 mm or more but not more than 55 mm	0 %	-	31.12.2021
0.7511	ex85051990	60	Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, intended to become permanent magnets after magnetisation, with the following dimensions:a length of 10 mm or more but not more than 100 mm (± 1 mm),a width of 10 mm or more but not more than 100 mm (± 1 mm),a thickness of 2 mm or more but not more than 15 mm (±0,15 mm)	0 %	-	31.12.2023
0.6703	ex85076000	33	Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 1000 mm,a width of 100 mm or more, but not more than 1000 mm,a height of 200 mm or more, but not more than 1500 mm,a weight of 75 kg or more, but not more than 200 kg,a nominal capacity of 150 Ah or more, but not more than 500 Ah,a nominal output voltage of 230 V AC (Line to neutral) or a nominal voltage of 64 V (± 10 %)	1,3 %	-	31.12.2020
0.6702	ex85076000	37	Lithium-ion accumulator, with:a length of 1200 mm or more, but not more than 2000 mm,a width of 800 mm or more, but not more than 1300 mm,a height of 2000 mm or more, but not more than 2800 mm,a weight of 1800 kg or more, but not more than 3000 kg,a nominal capacity of 2800 Ah or more, but not more than 7200 Ah	1,3 %	-	31.12.2020
0.5342	ex85076000	65	Cylindrical lithium ion cell with:3,5 VDC to 3,8 VDC,300 mAh to 900 mAh, anda diameter of 10,0 mm to 14,5 mm	1,3 %	-	31.12.2021
0.6753	ex85076000	77	Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mm,a width of 935 mm or more, but not more than 1660 mm,a height of 85 mm or more, but not more than 700 mm,a weight of 250 kg or more, but not more than 700 kg,a power of not more than 175 kWh,a nominal voltage of 400 V	1,3 %	-	31.12.2020
0.6863	ex85123090	20	Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holder,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
0.6689	ex85299065	28	Electronic assembly comprising a printed circuit board with at least:processors for multi-media applications and video signal processing,FPGA (Field Programmable Gate Array),flash memory,operating memory,with or without USB, HDMI, VGA- and RJ-45 interfaces,sockets and plugs for connecting an LCD-display, an LED lighting and a control panel	0 %	p/st	31.12.2020
0.7251	ex85371091	70	Programmable motor memory controller for a voltage not exceeding 1000 V, comprising at least:a printed circuit with active and passive components,an aluminium housing, andmultiple connectors	0 %	p/st	31.12.2022
0.6866	ex85389091ex85389099	2050	Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,a connection cable with a plug,at least two mounting brackets,whether or not PCB including integrated circuits, diodes and transistors,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
0.5953	ex85389099	95	Copper base plate, containing more components than Insulated Gate Bipolar Transistor (IGBT) chips and diodes with a voltage of 650 V or more but not more than 1200 V, for use as a heatsink in the manufacture of IGBT modules	0 %	p/st	31.12.2023
0.6710	ex85443000ex85444290	6050	Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87	0 %	-	31.12.2020
0.6867	ex85443000	85	Extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2020
0.5002	ex85459090	40	Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,a thickness of less than 600 μm,a weight of less than 500 g/m2	0 %	m2	31.12.2020
0.7581	ex87085020ex87085099ex87089910ex87089997	60154565	Car transfer case with single input and dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 mm × 570 mm × 510 mm, comprising:at least an actuator,whether or not an interior distribution by chain	0 %	-	31.12.2024
0.6711	ex87088020ex87088035	1010	Upper strut insulator containing:a metal holder with three mounting screws, anda rubber bump,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
0.6705	ex87088020ex87088091	2010	Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
0.6704	ex87088020ex87088091	3020	Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
0.7365	ex87088099	30	Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:with a chrome coating,of a diameter of 11 mm or more, but not more than 28 mm,of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding	0 %	-	31.12.2022
0.6687	ex87089510ex87089599	1020	Inflatable safety cushion of high-strength polyamide fibre:sewn,folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming	0 %	p/st	31.12.2020
0.6686	ex87141090	10	Motorcycle fork rod inner tubes:of SAE1541 carbon steel,with a hard chromium layer of 20 μm (+ 15 μm/– 5 μm),with a wall thickness of 1,3 mm or more, but not more than 1,6 mm,with an elongation at break of 15 %,perforated	0 %	p/st	31.12.2020
0.5692	ex90021100	20	Lenses:measuring not more than 95 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times	0 %	-	31.12.2022
0.6527	ex90292031ex90299000	2030	Clustered instrument panel with a microprocessor control board, with or without stepping motors, LED indicators or LCD display showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2024
0.5025	ex94019080	10	Ratchet disk for use in the manufacture of reclining car seats	0 %	p/st	31.12.2020"

----------------------

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).;(4)the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial number	CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
"0.7897	ex28252000	10	Lithium hydroxide monohydrate (CAS RN 1310-66-3)	2,6 %	-	31.12.2020
0.7895	ex29037200	10	Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more	0 %	-	31.12.2024
0.7826	ex29037930	30	1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more	0 %	-	31.12.2024
0.7914	ex29053995	70	2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7828	ex29093038	50	2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more	0 %	-	31.12.2024
0.7846	ex29095000	40	2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7910	ex29096000	50	Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes	0 %	-	31.12.2024
0.7824	ex29145000	15	1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7834	ex29154000	10	Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7830	ex29154000	20	Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more	0 %	-	31.12.2024
0.7899	ex29159070	18	Myristitic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7845	ex29163990	22	6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7827	ex29163990	27	Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more	0 %	-	31.12.2024
0.7880	ex29171980	45	Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more	0 %	-	31.12.2024
0.7907	ex29181998	50	12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters	0 %	-	31.12.2024
0.7864	ex29183000	35	3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)	0 %	-	31.12.2024
0.7898	ex29202900	80	2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a content of 95 % or more by weight (CAS RN 126050-54-2)	0 %	-	31.12.2024
0.7894	ex29215190	10	N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more	0 %	-	31.12.2024
0.7860	ex29221900	15	Aqueous solution, containing by weight:73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)	0 %	-	31.12.2024
0.7853	ex29224985	13	O-Benzylglycine p-toluenesulphonate (CAS RN 1738-76-7) with a purity by weight of 93 % or more	0 %	-	31.12.2024
0.7879	ex29239000	50	Betaine hydrochloride (CAS RN 590-46-5) with a purity by weight of 93 % or more	0 %	-	31.12.2024
0.7841	ex29242970	47	(S)-tert-butyl(1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7832	ex29252900	50	(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7859	ex29309098	29	4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7833	ex29309098	31	(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7838	ex29322090	53	(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7855	ex29329900	37	4-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol (CAS RN 1951-26-4) with a purity by weight of 99 % or more	0 %	-	31.12.2024
0.7903	ex29331990	13	3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7835	ex29331990	17	1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7918	ex29331990	23	Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more	0 %	-	31.12.2024
0.7836	ex29331990	27	3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7844	ex29333999	74	4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7906	ex29333999	81	4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7866	ex29333999	82	Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a purity by dry weight of 92 % or more	0 %	-	31.12.2024
0.7825	ex29335995	68	Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more	0 %	-	31.12.2024
0.7839	ex29339980	66	(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7843	ex29349990	17	(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7837	ex29349990	29	(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7840	ex29349990	33	(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more	0 %	-	31.12.2024
0.7842	ex29349990	69	3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more	0 %	-	31.12.2024
0.7854	ex29359090	70	(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more	0 %	-	31.12.2024
0.7885	ex32041500	20	Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight	0 %	-	31.12.2024
0.7922	ex38231910	20	12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters	0 %	-	31.12.2024
0.7831	ex38249992	62	Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane	0 %	-	31.12.2024
0.7861	ex39039090	33	Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more	0 %	-	31.12.2024
0.7865	ex39094000	70	Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80 °C or more but not more than 95 °C according to standard ASTM E28-92 (CAS RN 112484-41-0)	0 %	-	31.12.2024
0.7882	ex39206900	30	Mono- or multilayer, transverse oriented, shrink film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 20 μm or more but not more than 100 μm,with a length of 2385 m or more but not more than 9075 m,biodegradable and compostable (as determined by the method EN 13432)	0 %	-	31.12.2024
0.7883	ex39206900	70	Mono- or multilayer, biaxially oriented film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 9 μm or more but not more than 120 μm,with a length of 1395 m or more but not more than 21560 m,biodegradable and compostable (as determined by the method EN 13432)	0 %	-	31.12.2024
0.7891	ex73269094	40	Steel ball neck, drop forged, machined, also heat treated or surface treated, with an angle between the centre of the conical head and the arm of less than 90° or with an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars	0 %	-	31.12.2024
0.7911	ex75062000	10	Sheets and strips in coils of nickel alloy C276 (EN 2.4819) witha thickness of 0,5 mm or more but not more than 3 mm,a width of 770 mm or more but not more than 1250 mm	0 %	-	31.12.2024
0.7851	ex84099900	25	Hoses assembly for fuel return from injectors to engine fuel unit, consisting of at least:three rubber hoses, whether or not with a protective braided sleeving,three connectors for connecting fuel injectors,five metal clamps,one T-shaped plastic joint,for use in the manufacture of engines of motor vehicles	0 %	-	31.12.2024
0.7850	ex84813099	30	Brake booster check valve assembly, containing at least:three vulcanized rubber hoses,one membrane valve,two metal clamps,one metal holder,whether or not a connecting metal pipe,for use in the manufacture of motor vehicles	0 %	-	31.12.2024
0.7920	ex84834059	30	Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of lawn mowers of Subheadings 843311 and 843319 or other mowers of Subheading 843320	0 %	p/st	31.12.2024
0.7857	ex85011010	40	Synchronous hybrid stepper motor with:an output not exceeding 18 W,two phases,a rated current of not more than 2,5 A/phase,a rated voltage of not more than 20 V,with or without a threaded shaft,for use in the manufacture of 3D printers	0 %	-	31.12.2024
0.7888	ex85076000	68	Lithium-ion accumulator in a metal housing with:a length of 173 mm or more but not more than 175 mm,a width of 41,5 mm or more but not more than 43 mm,a height of 85 mm or more but not more than 103 mm,a nominal voltage of 3,6 V or more but not more than 3,75 V, anda nominal capacity of 93 Ah or more but not more than 94 Ah	1,3 %	-	31.12.2024
0.7873	ex85371091	20	Electronic assembly containing:a microprocessor,a programmable memory controller and other electronic components mounted on a printed circuit,with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,for use in the manufacture of products of Subheadings 841821, 841829, 842112, 842211, 845011, 845012, 845019, 845121, 845129 and 851660	0 %	-	31.12.2024
0.7848	ex85443000	45	Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor – BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars	0 %	-	31.12.2024
0.7847	ex85443000	55	Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars	0 %	-	31.12.2024
0.7856	ex87084020ex87084050	7060	Manual gearbox in cast aluminium housing for transverse installation with:a width of not more than 480 mm,a height of not more than 400 mm,a length of not more than 550 mm,five gears,a differential gear,an engine torque of 250 Nm or less,for use in the manufacture of motor vehicles of Heading 8703	0 %	-	31.12.2024
0.7849	ex87089310ex87089390	4040	Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:cruise control reset,electronic parking brake release,start and stop engine management under Idle Stop and Go system (ISG),for use in the manufacture of passenger vehicles	0 %	-	31.12.2024
0.7921	ex87089997	18	Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of tractors of Subheadings 87019190 and 87019290, whose main function is that of a lawn mower	0 %	p/st	31.12.2023"

----------------------

Amendments and corrections
December 31, 2021	Implicitly repealed by 32021R2278
July 1, 2020	Application - See Art 2
June 27, 2020	Entry into force - Date pub. +1 See Art 2

Council Regulation (EU) 2020/874 of 15 June 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products