Council Regulation (EU) 2020/874 of 15 June 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Council Regulation (EU) 2020/874of 15 June 2020amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff (CCT) duties of the type referred to in Article 56(2)(c) of Regulation (EU) No 952/2013 of the European Parliament and of the CouncilRegulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1). ("CCT duties") on those products have been suspended by Council Regulation (EU) No 1387/2013Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).. Those products can be imported into the Union at reduced or zero duty rates.(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to grant a total suspension of the CCT duties on those products.(3)With a view to promoting integrated battery production in the Union in accordance with the communication from the Commission of 17 May 2018 entitled "Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean", a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. In addition, only a partial suspension of the CCT duties should be granted in respect of certain products that are currently subject to complete suspensions. The date for the mandatory review of those suspensions should be 31 December 2020 in order for that review to have regard to the evolution of the battery sector in the Union.(4)In respect of the products on the candidate list referred to in Article 59 of Regulation (EC) No 1907/2006 of the European Parliament and of the CouncilRegulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1)., only a partial suspension of the CCT duties should be granted. The date for the mandatory review of those suspensions should be 31 December 2021, in order to allow economic operators to replace such products with alternatives.(5)It is necessary to amend the product description, classification and end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.(6)It is no longer in the interest of the Union to maintain suspensions of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be withdrawn.(7)Regulation (EU) No 1387/2013 should therefore be amended accordingly.(8)In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the suspensions for the products concerned should apply from 1 July 2020. This Regulation should therefore enter into force as a matter of urgency,HAS ADOPTED THIS REGULATION:
Article 1The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.
Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2020.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 15 June 2020.For the CouncilThe PresidentA. Metelko-ZgombićANNEXThe Annex to Regulation (EU) No 1387/2013 is amended as follows:(1)all asterisks (*) and the related endnote containing the text "A newly introduced measure or a measure with amended conditions. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure." are deleted;(2)the entries with the serial numbers 0.2706, 0.2972, 0.3650, 0.3886, 0.3894, 0.3895, 0.4004, 0.4039, 0.4177, 0.4647, 0.4648, 0.4751, 0.5504, 0.5615, 0.5929, 0.6601, 0.6745, 0.7784 and 0.7803 are deleted;(3)the following entries replace those entries that have the same serial numbers:
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).;
Serial numberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate foreseen for mandatory review
"0.7288ex2841500011Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more2 %-31.12.2021
0.3419ex2850002080Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more0 %-31.12.2024
0.2583ex29038980451,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more2 %-31.12.2021
0.2942ex29199000352,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100 μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique0 %-31.12.2023
0.5037ex2922498517Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %-31.12.2020
0.3689ex2924190023Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more2 %-31.12.2021
0.6259ex2926907026Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products0 %-31.12.2024
0.2656ex2931399038N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more0 %-31.12.2024
0.7811ex2933199033Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine0 %-31.12.2024
0.4346ex29342080251,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one0 %-31.12.2022
0.5134ex3204110045Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)0 %-31.12.2020
0.7318ex3603006010Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 29,4 mm and a pin length of 6,68 mm (±0,3 mm) or more but not more than 7,54 mm (±0,3 mm)0 %-31.12.2022
0.5718ex3811210085Additives:containing more than 20 % or more but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,for use in the manufacture of blends of additives0 %-31.12.2022
0.7512ex3811290018Additives consisting of dihydroxy butanedioic acid – (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils0 %-31.12.2023
0.3069ex38249992882,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)0 %-31.12.2020
0.4719ex3824999335Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)0 %-31.12.2024
0.6953ex3901400020Octene linear low-density polyethylene (LLDPE) in the form of pellets with:10 % or more but not more than 20 % by weight of octene,a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),a melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,a gel area per 24,6 cm3 of not more than 20 mm2, andan anti-oxidant level of not more than 240 ppm0 %m331.12.2020
0.5161ex39191080ex391990807075Rolls of polyethylene foil:self-adhesive on one side,of a total thickness of 0,025 mm or more, but not more than 0,09 mm,of a total width of 60 mm or more, but not more than 1110 mm,for use in the manufacture of products of Headings 8521 or 8528 for protection purposes0 %-31.12.2021
0.4947ex3919908065Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner0 %-31.12.2024
0.3241ex3920102530Mono-layered high-density polyethylene film:containing by weight 99 % or more of polyethylene,with a thickness of 12 μm or more but not more than 20 μm,with a length of 4000 m or more but not more than 7000 m,with a width of 600 mm or more but not more than 900 mm0 %-31.12.2023
0.3312ex3921906035Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells0 %-31.12.2023
0.6708ex4009420020Rubber brake hose with:textile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,for use in the manufacture of goods of Chapter 870 %-31.12.2024
0.7372ex5311009010Plain-woven fabric of paper yarns glued on a tissue paper layer:with a weight of 190 g/m2 or more but not more than 280 g/m2, andcut into rectangles with a side length of 40 cm or more but not more than 140 cm0 %-31.12.2022
0.2546ex6903909030Silicon carbide reactor tubes and holders having a softening point of 1400 °C or higher0 %-31.12.2023
0.7619ex7006009040Plates of sodalime glass of STN (Super Twisted Nematic) quality having:a length of 300 mm or more but not more than 1500 mm,a width of 300 mm or more but not more than 1500 mm,a thickness of 0,5 mm or more but not more than 1,1 mm,an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,with or without a multilayer anti-reflection-coating on the other side and machined (chamfered) edges0 %-31.12.2023
0.7341ex7413000020Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed0 %-31.12.2022
0.3928ex7616999015Honeycomb aluminium blocks for use in the manufacture of aircraft parts0 %p/st31.12.2023
0.6730ex8101960010Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μm,a resistance of 40 Ω or more but not more than 300 Ω at length of 1 m0 %-31.12.2020
0.5838ex8105900010Bars or wires made of cobalt alloy containing by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium, and7 % (± 2 %) iron,conforming to the material specifications AMS 58420 %-31.12.2023
0.5570ex8207301010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles0 %p/st31.12.2022
0.5024ex83016000ex84199085ex84799070ex84819000ex85030099ex85159080ex85371098ex85389099ex87089910ex8708999730403050434055705522Silicone or plastic keyboards, comprising:parts of common metal, andwhether or not comprising parts of plastic,epoxy resin reinforced with fibreglass or wood,whether or not printed or surface-treated,with or without electrical conductors,with or without a membrane bonded to the keyboard,with or without mono or multilayer protective film0 %p/st31.12.2020
0.7670ex8409910025Air intake module for engine cylinders consisting of:a suction pipe,a pressure sensor,an electric throttle,hoses,brackets,for use in the manufacture of engines of motor vehicles0 %-31.12.2023
0.7718ex8409990075High pressure fuel rail of galvanised ferrite-pearlite steel with:at least one pressure sensor and one valve,a length of 314 mm or more, but not more than 322 mm,an operating pressure not more than 225 MPa,an inlet temperature not more than 95 °C,ambient temperature of – 45 °C or more, but not more than 145 °C,for use in the manufacture of compression ignition engines of motor vehicles0 %-31.12.2024
0.7377ex8481805940Flow-control valve:made of steel,with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,with chromium nitride coating,with a surface roughness of Rp 0,40 %-31.12.2022
0.7381ex8481805950Electromagnetic valve for quantity control with:a plunger,a solenoid with a of coil resistance of 1,85 Ω or more, but not more than 8,2 Ω0 %-31.12.2022
0.7604ex8484200020Mechanical face sealing device made of two movable rings (one ceramic mating with a thermal conductivity lower than 80 W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side0 %-31.12.2023
0.5577ex8501310050DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 9 V or more, but not more than 16 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without a rotor angle position sensor of resolver type or Hall effect type,with or without a pulley,of the kind used in power steering systems for cars0 %-31.12.2022
0.4855ex85013300ex85014080ex85015350305010Electric drive for motor vehicles, with an output of not more than 315 kW:with an AC or DC motor with or without transmission,with or without power electronics0 %-31.12.2021
0.5783ex8503009940Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 85010 %p/st31.12.2022
0.7029ex8505110047Articles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:a length of 9 mm or more but not more than 105 mm,a width of 5 mm or more but not more than 105 mm, anda height of 2 mm or more but not more than 55 mm0 %-31.12.2021
0.7511ex8505199060Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, intended to become permanent magnets after magnetisation, with the following dimensions:a length of 10 mm or more but not more than 100 mm (± 1 mm),a width of 10 mm or more but not more than 100 mm (± 1 mm),a thickness of 2 mm or more but not more than 15 mm (±0,15 mm)0 %-31.12.2023
0.6703ex8507600033Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 1000 mm,a width of 100 mm or more, but not more than 1000 mm,a height of 200 mm or more, but not more than 1500 mm,a weight of 75 kg or more, but not more than 200 kg,a nominal capacity of 150 Ah or more, but not more than 500 Ah,a nominal output voltage of 230 V AC (Line to neutral) or a nominal voltage of 64 V (± 10 %)1,3 %-31.12.2020
0.6702ex8507600037Lithium-ion accumulator, with:a length of 1200 mm or more, but not more than 2000 mm,a width of 800 mm or more, but not more than 1300 mm,a height of 2000 mm or more, but not more than 2800 mm,a weight of 1800 kg or more, but not more than 3000 kg,a nominal capacity of 2800 Ah or more, but not more than 7200 Ah1,3 %-31.12.2020
0.5342ex8507600065Cylindrical lithium ion cell with:3,5 VDC to 3,8 VDC,300 mAh to 900 mAh, anda diameter of 10,0 mm to 14,5 mm1,3 %-31.12.2021
0.6753ex8507600077Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mm,a width of 935 mm or more, but not more than 1660 mm,a height of 85 mm or more, but not more than 700 mm,a weight of 250 kg or more, but not more than 700 kg,a power of not more than 175 kWh,a nominal voltage of 400 V1,3 %-31.12.2020
0.6863ex8512309020Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holder,for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.6689ex8529906528Electronic assembly comprising a printed circuit board with at least:processors for multi-media applications and video signal processing,FPGA (Field Programmable Gate Array),flash memory,operating memory,with or without USB, HDMI, VGA- and RJ-45 interfaces,sockets and plugs for connecting an LCD-display, an LED lighting and a control panel0 %p/st31.12.2020
0.7251ex8537109170Programmable motor memory controller for a voltage not exceeding 1000 V, comprising at least:a printed circuit with active and passive components,an aluminium housing, andmultiple connectors0 %p/st31.12.2022
0.6866ex85389091ex853890992050Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,a connection cable with a plug,at least two mounting brackets,whether or not PCB including integrated circuits, diodes and transistors,for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.5953ex8538909995Copper base plate, containing more components than Insulated Gate Bipolar Transistor (IGBT) chips and diodes with a voltage of 650 V or more but not more than 1200 V, for use as a heatsink in the manufacture of IGBT modules0 %p/st31.12.2023
0.6710ex85443000ex854442906050Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 870 %-31.12.2020
0.6867ex8544300085Extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 870 %p/st31.12.2020
0.5002ex8545909040Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,a thickness of less than 600 μm,a weight of less than 500 g/m20 %m231.12.2020
0.7581ex87085020ex87085099ex87089910ex8708999760154565Car transfer case with single input and dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 mm × 570 mm × 510 mm, comprising:at least an actuator,whether or not an interior distribution by chain0 %-31.12.2024
0.6711ex87088020ex870880351010Upper strut insulator containing:a metal holder with three mounting screws, anda rubber bump,for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.6705ex87088020ex870880912010Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.6704ex87088020ex870880913020Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, for use in the manufacture of goods of Chapter 870 %p/st31.12.2020
0.7365ex8708809930Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:with a chrome coating,of a diameter of 11 mm or more, but not more than 28 mm,of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding0 %-31.12.2022
0.6687ex87089510ex870895991020Inflatable safety cushion of high-strength polyamide fibre:sewn,folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming0 %p/st31.12.2020
0.6686ex8714109010Motorcycle fork rod inner tubes:of SAE1541 carbon steel,with a hard chromium layer of 20 μm (+ 15 μm/– 5 μm),with a wall thickness of 1,3 mm or more, but not more than 1,6 mm,with an elongation at break of 15 %,perforated0 %p/st31.12.2020
0.5692ex9002110020Lenses:measuring not more than 95 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times0 %-31.12.2022
0.6527ex90292031ex902990002030Clustered instrument panel with a microprocessor control board, with or without stepping motors, LED indicators or LCD display showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.5025ex9401908010Ratchet disk for use in the manufacture of reclining car seats0 %p/st31.12.2020"
----------------------
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).;(4)the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).
Serial numberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate foreseen for mandatory review
"0.7897ex2825200010Lithium hydroxide monohydrate (CAS RN 1310-66-3)2,6 %-31.12.2020
0.7895ex2903720010Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more0 %-31.12.2024
0.7826ex29037930301-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more0 %-31.12.2024
0.7914ex29053995702-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more0 %-31.12.2024
0.7828ex29093038502-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more0 %-31.12.2024
0.7846ex29095000402-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more0 %-31.12.2024
0.7910ex2909600050Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes0 %-31.12.2024
0.7824ex29145000151,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more0 %-31.12.2024
0.7834ex2915400010Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more0 %-31.12.2024
0.7830ex2915400020Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more0 %-31.12.2024
0.7899ex2915907018Myristitic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more0 %-31.12.2024
0.7845ex29163990226-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.7827ex2916399027Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more0 %-31.12.2024
0.7880ex2917198045Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more0 %-31.12.2024
0.7907ex291819985012-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters0 %-31.12.2024
0.7864ex29183000353-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)0 %-31.12.2024
0.7898ex29202900802,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a content of 95 % or more by weight (CAS RN 126050-54-2)0 %-31.12.2024
0.7894ex2921519010N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more0 %-31.12.2024
0.7860ex2922190015Aqueous solution, containing by weight:73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)0 %-31.12.2024
0.7853ex2922498513O-Benzylglycine p-toluenesulphonate (CAS RN 1738-76-7) with a purity by weight of 93 % or more0 %-31.12.2024
0.7879ex2923900050Betaine hydrochloride (CAS RN 590-46-5) with a purity by weight of 93 % or more0 %-31.12.2024
0.7841ex2924297047(S)-tert-butyl(1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.7832ex2925290050(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.7859ex29309098294-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more0 %-31.12.2024
0.7833ex2930909831(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more0 %-31.12.2024
0.7838ex2932209053(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more0 %-31.12.2024
0.7855ex29329900374-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol (CAS RN 1951-26-4) with a purity by weight of 99 % or more0 %-31.12.2024
0.7903ex29331990133-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more0 %-31.12.2024
0.7835ex29331990171,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more0 %-31.12.2024
0.7918ex2933199023Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more0 %-31.12.2024
0.7836ex29331990273-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more0 %-31.12.2024
0.7844ex29333999744-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more0 %-31.12.2024
0.7906ex29333999814-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more0 %-31.12.2024
0.7866ex2933399982Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a purity by dry weight of 92 % or more0 %-31.12.2024
0.7825ex2933599568Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more0 %-31.12.2024
0.7839ex2933998066(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more0 %-31.12.2024
0.7843ex2934999017(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.7837ex2934999029(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more0 %-31.12.2024
0.7840ex2934999033(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more0 %-31.12.2024
0.7842ex29349990693-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more0 %-31.12.2024
0.7854ex2935909070(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more0 %-31.12.2024
0.7885ex3204150020Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight0 %-31.12.2024
0.7922ex382319102012-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters0 %-31.12.2024
0.7831ex3824999262Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane0 %-31.12.2024
0.7861ex3903909033Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more0 %-31.12.2024
0.7865ex3909400070Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80 °C or more but not more than 95 °C according to standard ASTM E28-92 (CAS RN 112484-41-0)0 %-31.12.2024
0.7882ex3920690030Mono- or multilayer, transverse oriented, shrink film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 20 μm or more but not more than 100 μm,with a length of 2385 m or more but not more than 9075 m,biodegradable and compostable (as determined by the method EN 13432)0 %-31.12.2024
0.7883ex3920690070Mono- or multilayer, biaxially oriented film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 9 μm or more but not more than 120 μm,with a length of 1395 m or more but not more than 21560 m,biodegradable and compostable (as determined by the method EN 13432)0 %-31.12.2024
0.7891ex7326909440Steel ball neck, drop forged, machined, also heat treated or surface treated, with an angle between the centre of the conical head and the arm of less than 90° or with an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars0 %-31.12.2024
0.7911ex7506200010Sheets and strips in coils of nickel alloy C276 (EN 2.4819) witha thickness of 0,5 mm or more but not more than 3 mm,a width of 770 mm or more but not more than 1250 mm0 %-31.12.2024
0.7851ex8409990025Hoses assembly for fuel return from injectors to engine fuel unit, consisting of at least:three rubber hoses, whether or not with a protective braided sleeving,three connectors for connecting fuel injectors,five metal clamps,one T-shaped plastic joint,for use in the manufacture of engines of motor vehicles0 %-31.12.2024
0.7850ex8481309930Brake booster check valve assembly, containing at least:three vulcanized rubber hoses,one membrane valve,two metal clamps,one metal holder,whether or not a connecting metal pipe,for use in the manufacture of motor vehicles0 %-31.12.2024
0.7920ex8483405930Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of lawn mowers of Subheadings 843311 and 843319 or other mowers of Subheading 8433200 %p/st31.12.2024
0.7857ex8501101040Synchronous hybrid stepper motor with:an output not exceeding 18 W,two phases,a rated current of not more than 2,5 A/phase,a rated voltage of not more than 20 V,with or without a threaded shaft,for use in the manufacture of 3D printers0 %-31.12.2024
0.7888ex8507600068Lithium-ion accumulator in a metal housing with:a length of 173 mm or more but not more than 175 mm,a width of 41,5 mm or more but not more than 43 mm,a height of 85 mm or more but not more than 103 mm,a nominal voltage of 3,6 V or more but not more than 3,75 V, anda nominal capacity of 93 Ah or more but not more than 94 Ah1,3 %-31.12.2024
0.7873ex8537109120Electronic assembly containing:a microprocessor,a programmable memory controller and other electronic components mounted on a printed circuit,with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,for use in the manufacture of products of Subheadings 841821, 841829, 842112, 842211, 845011, 845012, 845019, 845121, 845129 and 8516600 %-31.12.2024
0.7848ex8544300045Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor – BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars0 %-31.12.2024
0.7847ex8544300055Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars0 %-31.12.2024
0.7856ex87084020ex870840507060Manual gearbox in cast aluminium housing for transverse installation with:a width of not more than 480 mm,a height of not more than 400 mm,a length of not more than 550 mm,five gears,a differential gear,an engine torque of 250 Nm or less,for use in the manufacture of motor vehicles of Heading 87030 %-31.12.2024
0.7849ex87089310ex870893904040Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:cruise control reset,electronic parking brake release,start and stop engine management under Idle Stop and Go system (ISG),for use in the manufacture of passenger vehicles0 %-31.12.2024
0.7921ex8708999718Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of tractors of Subheadings 87019190 and 87019290, whose main function is that of a lawn mower0 %p/st31.12.2023"
----------------------
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).