Commission Implementing Regulation (EU) 2019/1859 of 6 November 2019 laying down rules for the application of Article 10 of Regulation (EU) 2019/1242 of the European Parliament and of the Council as regards the collection of certain data (Text with EEA relevance)
Modified by
Commission Implementing Regulation (EU) 2022/96of 25 January 2022amending Implementing Regulation (EU) 2019/1859 laying down rules for the application of Article 10 of Regulation (EU) 2019/1242 of the European Parliament and of the Council as regards the collection of certain data(Text with EEA relevance), 32022R0096, January 26, 2022
Commission Implementing Regulation (EU) 2019/1859of 6 November 2019laying down rules for the application of Article 10 of Regulation (EU) 2019/1242 of the European Parliament and of the Council as regards the collection of certain data(Text with EEA relevance)Article 1Monitoring and reporting by manufacturers1.Manufacturers shall monitor and report to the Commission the comma separated values file of the same name as the job file and with an extension .vsum comprising aggregated results per simulated mission profile and payload condition that is generated by the simulation tool referred to in Article 5(1)(a) of Regulation (EU) 2017/2400 in its graphical user interface (GUI) version ("sum exec data file") for new heavy-duty vehicles with a date of simulation before 1 July 2021 in accordance with this Regulation.2.They shall monitor the sum exec data file for each new heavy-duty vehicle:(a)with a date of simulation as from 1 October 2019 to 30 June 2020 and report these data at the latest by 30 September 2020;(b)with a date of simulation as from 1 January 2019 to 30 September 2019 and report these data at the latest by 30 September 2021;(c)with a date of simulation as from 1 July 2020 to 30 June 2021 and report these data at the latest by 30 September 2021.3.The sum exec data files shall be transmitted by the contact point of the manufacturer via electronic data transfer to the Business Data Repository managed by the European Environment Agency ("Agency"). The contact point shall notify the Commission and the Agency when the data are transmitted by email to the addresses referred to in paragraph 5 below.4.The contact point responsible for uploading the data for each manufacturer shall be the one the manufacturer appointed under Regulation (EU) 2018/956, unless the manufacturer notifies the Commission otherwise by 1 September 2020.5.Notifications shall be sent to the following addresses: "EC-CO2-HDV-IMPLEMENTATION@ec.europa.eu" and "HDV-monitoring@eea.europa.eu".Article 2Verification1.Manufacturers shall be responsible for the correctness and quality of the data they report pursuant to Article 1(2). They shall inform the Commission without delay of any errors detected in the data reported.2.The Commission may verify the quality of the data reported pursuant to Article 1(2).3.Where the Commission is informed of errors in the data or finds, pursuant to its own verification, discrepancies in the data, it shall, where appropriate, take the necessary measures to correct it after consultation of the manufacturer.Article 3Entry into forceThis Regulation shall enter into force on the third day following that of its publication in the Official Journal of the European Union.This Regulation shall be binding in its entirety and directly applicable in all Member States.