Article 1The Annex to Regulation (EU) No 1387/2013 is amended as follows:(1)all asterisks in the table and the endnote (*), containing the text "New or amended position or position with prolonged validity.", are deleted;(2)in the table, the rows for the products for which the CN and TARIC codes are set out in Annex I to this Regulation are deleted;(3)the rows for the products listed in Annex II to this Regulation are inserted into the table according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively.

Article 2This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union.It shall apply from 1 July 2019.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 13 June 2019.For the CouncilThe PresidentM.C. BudăiANNEX IIn the table set out in the Annex to Regulation (EU) No 1387/2013, the rows relating to suspensions for the products identified by the following CN and TARIC codes are deleted:

CN code	TARIC
ex28269080	10
ex28269080	20
ex29209010	15
ex29209010	25
ex29209010	35
ex29211999	25
ex29269070	12
ex32089019	20
ex35069110	10
ex35069110	40
ex35069110	50
ex35069190	10
ex35069190	40
ex35069190	50
ex35069190	60
ex37013000	20
ex37013000	30
ex37019900	10
ex37079029	10
ex37079029	40
ex37079029	50
ex38011000	10
ex38019000	30
ex38069000	10
ex38123990	35
ex38151990	87
ex38159090	22
ex38249992	37
ex39041000	20
ex39072020	40
ex39094000	60
ex39211900	35
ex39211900	40
ex56031290	50
ex56031290	70
ex56031390	70
ex56039290	40
ex56039390	10
ex74101100	10
ex81082000	40
ex81082000	60
ex84679900	10
ex84798997	50
ex84798997	80
ex84799020	80
ex84799070	80
ex84818059	30
ex84818059	40
ex84818059	50
ex84818059	60
ex84821010	40
ex84821090	30
ex85013100	55
ex85013200	60
ex85013300	15
ex85044082	40
ex85044082	50
ex85044088	30
ex85044090	15
ex85044090	25
ex85044090	30
ex85044090	40
ex85044090	50
ex85044090	70
ex85044090	80
ex85045095	20
ex85045095	40
ex85045095	50
ex85045095	60
ex85045095	70
ex85045095	80
ex85049011	10
ex85049011	20
ex85049099	20
ex85069000	10
ex85071020	80
ex85075000	20
ex85075000	40
ex85076000	15
ex85076000	20
ex85076000	23
ex85076000	25
ex85076000	30
ex85076000	33
ex85076000	43
ex85076000	45
ex85076000	47
ex85076000	50
ex85076000	53
ex85076000	60
ex85076000	71
ex85076000	80
ex85076000	85
ex85078000	20
ex85079080	60
ex85182995	30
ex85182995	40
ex85183095	20
ex85184080	91
ex85184080	92
ex85184080	93
ex85189000	30
ex85189000	35
ex85189000	40
ex85189000	50
ex85189000	60
ex85189000	80
ex85229049	60
ex85229049	65
ex85229080	30
ex85229080	65
ex85229080	80
ex85229080	84
ex85229080	97
ex85261000	20
ex85279900	10
ex85279900	20
ex85291080	60
ex85291080	70
ex85299065	15
ex85299065	25
ex85299065	40
ex85299092	57
ex85359000	30
ex85364900	30
ex85365011	35
ex85365011	40
ex85365019	93
ex85365080	81
ex85365080	82
ex85365080	83
ex85365080	97
ex85459090	30
ex90012000	10
ex90012000	20
ex90019000	55
ex90021100	15
ex90021100	25
ex90021100	35
ex90021100	45
ex90021100	55
ex90021100	65
ex90021100	75
ex90021900	10
ex90021900	20
ex90021900	30
ex90021900	40
ex90021900	50
ex90021900	60
ex90021900	70
ex90271090	10
ex90292031	10
ex90299000	20
ex90303100	20

ANNEX IIIn the table set out in the Annex to Regulation (EU) No 1387/2013, the following rows are inserted according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively:

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
15162010		Hydrogenated castor oil, so called "opal-wax"	0 %	—	31.12.2023
ex28181011	10	Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,0	0 %	—	31.12.2023
ex28269080	10	Lithium hexafluorophosphate (1-) (CAS RN 21324-40-3)	0 %	—	31.12.2019
ex28281000	10	Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more	0 %	—	31.12.2023
ex29053200	10	(2S)-propane-1,2-diol (CAS RN 4254-15-3)	0 %	—	31.12.2023
ex29093090	35	1-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738-29-9)	0 %	—	31.12.2023
ex29109000	25	Phenyloxirane (CAS RN 96-09-3)	0 %	—	31.12.2023
ex29122900	55	Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5)	0 %	—	31.12.2023
ex29159070	15	2,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9)	0 %	—	31.12.2023
ex29163990	57	2-Phenylprop-2-enoic acid (CAS RN 492-38-6)	0 %	—	31.12.2023
ex29183000	25	(E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2)	0 %	—	31.12.2023
ex29189990	33	Vanillic Acid (CAS RN 121-34-6) containingnot more than 10 ppm of Palladium (CAS RN 7440-05-3),not more than 10 ppm of bismuth (CAS RN 7440-69-9),not more than 14 ppm of formaldehyde (CAS RN 50-00-0),not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3),not more than 0,5 % by weight of vanillin (CAS RN 121-33-5)	0 %	—	31.12.2023
ex29209010	15	Ethyl methyl carbonate (CAS RN 623-53-0)	0 %	—	31.12.2019
ex29209010	25	Diethyl carbonate (CAS RN 105-58-8)	0 %	—	31.12.2019
ex29209010	35	Vinylene carbonate (CAS RN 872-36-6)	0 %	—	31.12.2019
ex29209070	20	Diethyl phosphorochloridate (CAS RN 814-49-3)	0 %	—	31.12.2023
ex29214300	70	5-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3)	0 %	—	31.12.2023
ex29214500	30	(5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548-48-2)	0 %	—	31.12.2023
ex29214500	80	2-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3)	0 %	—	31.12.2023
ex29214900	35	2-Ethylaniline (CAS RN 578-54-1)	0 %	—	31.12.2023
ex29221900	55	3-Aminoadamantan-1-ol (CAS RN 702-82-9)	0 %	—	31.12.2023
ex29222900	33	o-Phenetidine (CAS RN 94-70-2)	0 %	—	31.12.2023
ex29239000	65	N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 %	0 %	—	31.12.2023
ex29241900	75	(S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0)	0 %	—	31.12.2023
ex29242970	67	N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2)	0 %	—	31.12.2023
ex29242970	70	N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide	0 %	—	31.12.2023
ex29269070	60	Cyfluthrin (ISO) (CAS RN 68359-37-5) or beta-cyfluthrin (ISO) (CAS RN 1820573-27-0) with a purity by weight of 95 % or more	0 %	—	31.12.2019
ex29309098	38	Allyl isothiocyanate (CAS RN 57-06-7)	0 %	—	31.12.2023
ex29309098	50	3-Mercaptopropionic acid (CAS RN 107-96-0)	0 %	—	31.12.2023
ex29321900	65	Tefuryltrione (ISO) (CAS RN 473278-76-1)	0 %	—	31.12.2023
ex29322090	75	3-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6)	0 %	—	31.12.2023
ex29329900	27	(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4)	0 %	—	31.12.2023
ex29331990	65	4-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120-52-2)	0 %	—	31.12.2023
ex29333999	56	2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8)	0 %	—	31.12.2023
ex29333999	59	Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0)	0 %	—	31.12.2023
ex29333999	61	6-Bromopyridin-2-amine (CAS RN 19798-81-3)	0 %	—	31.12.2023
ex29333999	62	Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4)	0 %	—	31.12.2023
ex29333999	64	Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8)	0 %	—	31.12.2023
ex29333999	68	1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more	0 %	—	31.12.2023
ex29334990	80	Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1)	0 %	—	31.12.2020
ex29335400	10	5,5′-(1,2-diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6)	0 %	—	31.12.2023
ex29335995	63	1-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0)	0 %	—	31.12.2023
ex29336980	27	Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0)	0 %	—	31.12.2023
ex29339980	58	Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more	0 %	—	31.12.2023
ex29339980	59	Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9)	0 %	—	31.12.2023
ex29339980	61	(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1)	0 %	—	31.12.2023
ex29339980	63	L-Prolinamide (CAS RN 7531-52-4)	0 %	—	31.12.2023
ex29339980	68	5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2′,1′-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9)	0 %	—	31.12.2023
ex29349990	78	[(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738-19-7)	0 %	—	31.12.2023
ex29349990	80	2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4)	0 %	—	31.12.2023
ex29359090	33	4-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3)	0 %	—	31.12.2023
ex29359090	37	1,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2)	0 %	—	31.12.2023
ex29359090	60	4-[(3-Methylphenyl)amino]pyridine-3-sulphonamide (CAS RN72811-73-5)	0 %	—	31.12.2023
ex32041700	31	Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight	0 %	—	31.12.2023
ex32050000	20	Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2),65 % or more but no more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)	0 %	—	31.12.2023
ex32050000	30	Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1),65 % or more but no more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)	0 %	—	31.12.2023
ex32089019	55	Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent	0 %	—	31.12.2020
ex35069190	10	Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)	0 %	—	31.12.2023
ex35069190	40	Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)	0 %	—	31.12.2019
ex35069190	50	Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,dissolved in:Methyl ethyl ketone (CAS RN 78-93-3),Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)	0 %	—	31.12.2020
ex35069190	60	Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 25 % or more but not more than 35 %	0 %	l	31.12.2022
ex38123990	35	Mixture containing by weight:25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9),not more than 20 % of other organic compounds,on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)	0 %	—	31.12.2023
ex38151200	20	Spherical catalyst consisting of a support of aluminium oxide coated with platinum, witha diameter of 1,4 mm or more but not more than 2,0 mm, anda platinum content by weight of 0,2 % or more but not more than 0,5 %	0 %	—	31.12.2023
ex38151200	30	Catalystcontaining 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals,deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide, the honeycomb structure having,a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight,62 cells per cm2 or more, but not more than 140 cells per cm2,a diameter of 100 mm or more, but not more than 120 mm, anda length of 60 mm or more, but not more than 150 mm,for use in the production of motor vehicles	0 %	—	31.12.2023
ex38159090	43	Catalyst in powder form consisting by weight of92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7),5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and2,5 % (± 1,5) % sulphur trioxide (CAS RN 7446-11-9)	0 %	—	31.12.2022
ex38249992	31	Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules	0 %	—	31.12.2023
ex38249992	37	Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4)	0 %	—	31.12.2023
ex38249996	33	Buffer cartridge not exceeding 8000 ml containing:0,05 % or more but not more than 0,1 % by weight of 5-Chloro-2-methyl-2,3-dihydroisothiazol-3-one (CAS RN 55965-84-9), and0,05 % or more but not more than 0,1 % by weight of 2-Methyl-2,3-dihydroisothiazol-3-one (CAS RN 2682-20-4) as a biostatic	0 %	—	31.12.2023
ex39046980	20	Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)	0 %	—	31.12.2023
ex39046980	30	Copolymer of tetrafluoroethylene, hexafluoropropene and ethene	0 %	—	31.12.2023
ex39072020	40	Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3600	0 %	—	31.12.2023
ex39209959	30	Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite	0 %	—	31.12.2023
ex39211900	40	Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:a width of 98 mm or more but not more than 170 mm,a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators	0 %	—	31.12.2019
ex39263000	40	Plastic internal door handle used in the manufacture of motor vehicles	0 %	—	31.12.2023
ex54024400	10	Synthetic elastomeric filament yarn:untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1000 dtex,composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran,for use in the manufacture of disposable hygiene products of heading 9619	0 %	—	31.12.2023
ex70060090	40	Plates of sodalime glass of STN (Super Twisted Nematic) quality having:a length of 300 mm or more but not more than 600 mm,a width of 300 mm or more but not more than 600 mm,a thickness of 0,5 mm or more but not more than 1,1 mm,an indium-tin-oxide coating with a resistance of 80 Ohms or more, but not more than 160 Ohms on one side,a multi layer anti-reflection-coating on the other side, andmachined (chamfered) edges,of a kind used in the manufacture of LCD (liquid crystal display) modules	0 %	—	31.12.2023
ex70194000ex70195200	7030	E-fibre glass fabrics:having a weight of 20 g/m2 or more, but not more than 214 g/m2,impregnated with silane,in rolls,having a humidity content by weight of 0,13 % or less, andhaving not more than 3 hollow fibres out of 100000 fibres,for the exclusive use in the manufacture of prepregs and copper clad laminates	0 %	—	31.12.2021
ex70195200	40	Epoxy resin coated glass woven fabric containing by weight:91 % or more but not more than 93 % of glass fibres,7 % or more but not more than 9 % of epoxy resin	0 %	—	31.12.2023
ex74101100ex85079080ex85459090	106030	Roll of laminate foil of graphite and copper, with:a width of 610 mm or more but not more than 620 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric rechargeable batteries	0 %	—	31.12.2019
ex76072090	10	Aluminium foil, in rolls:coated with polypropylene on one side and with polyamide on the other side with adhesive layers between,with a width of 200 mm or more, but not more than 400 mm,with a thickness of 0,138 mm or more, but not more than 0,168 mm,for use in the manufacture of lithium-ion battery cell pouches	0 %	—	31.12.2019
81041100		Unwrought magnesium, containing at least 99,8 % by weight of magnesium	0 %	—	31.12.2023
ex81082000	40	Titanium alloy ingot,with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 6 % of aluminium,2,5 % or more but not more than 5 % of tin,2,5 % or more but not more than 4,5 % of zirconium,0,2 % or more but not more than 1 % of niobium,0,1 % or more but not more than 1 % of molybdenum,0,1 % or more but not more than 0,5 % of silicon	0 %	p/st	31.12.2020
ex81082000	60	Titanium alloy ingot,with a diameter of 63,5 cm or more and a length of 450 cm or more,a weight of 6350 kg or more,containing alloy elements by weight of:5,5 % or more but not more than 6,7 % of aluminium,3,7 % of more but not more than 4,9 % of vanadium	0 %	p/st	31.12.2020
ex83012000	10	Mechanical or electromechanical steering column lock:with a height of 10,5 cm (± 3 cm),with a width of 6,5 cm (± 3 cm),in a metal housing,whether or not with a holder,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
ex83023000	10	Support bracket for an exhaust system:with a thickness of 0,7 mm or more but not more than 1,3 mm,of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,whether or not with mounting holes,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
ex84099100	60	The air intake module for engine cylinders consisting of:a suction pipe,a pressure sensor,an electric throttle,hoses,brackets,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
ex84099100	70	Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:a width of 40 mm or more but not more than 70 mm,valves length of 250 mm or more but not more than 350 mm,air volume of 5,2 litres, andan electrical flow control system that provides maximum performance at more than 3200 rpm	0 %	—	31.12.2023
ex84099900	65	The exhaust gas recirculation assembly consisting of:a control unit,an air throttle,an intake pipe,an outlet hose,for use in the manufacture of diesel engines of motor vehicles	0 %	—	31.12.2023
ex84141025	30	Tandem pump consisting of:an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1000 revolutions per minute,vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of – 666 mbar in 6 seconds at 750 revolutions per minute,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2023
ex84141089	30	Electric vacuum pump with:Controller Area Network (CAN bus),whether or not with a rubber hose,a connecting cable with connector,a mounting bracket,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
ex84143089	30	Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2023
ex84145935	20	Radial fan, with:a dimension of 25 mm (height) × 85 mm (width) × 85 mm (depth),a weight of 120 g,a rated voltage of 13,6 VDC (direct current voltage),an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),a rated current of 1,1 A (TYP),a rated power of 15 W,a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow),an air flow of not more than 17,5 litre/s,an air pressure of not more than16 mm H2O ≈ 157 Pa,	0 %	—	31.12.2023
		an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), andwith a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems
ex84679900	10	Mechanical switches for connecting electrical circuits, with:a voltage of 14,4 V or more but not more than 42 V,an amperage of 10 A or more but not more than 42 A,for use in the manufacture of machines falling within heading 8467	0 %	p/st	31.12.2019
ex84818059	30	Two-way flow control valve with housing, with:at least 5, but not more than 10 outlet holes with at least 0,09 mm, but not more than 0,2 mm diameter,at least 550 cm3/minute, but not more than 2000 cm3/minute flow rate,at least 19, but not more than 300 MPa operating pressure	0 %	—	31.12.2022
ex84818059	40	Flow-control valvemade of steel,with an outlet hole with a diameter of at least 0,1 mm, but not more than 0,3 mm,with an inlet hole with a diameter of at least 0,4 mm, but not more than 1,3 mm,with chromium nitride coating,with a surface roughness of Rp 0,4	0 %	—	31.12.2022
ex84818059	50	Electromagnetic valve for quantity control witha plunger,a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm	0 %	—	31.12.2022
ex84818059	60	Electromagnetic valve for quantity controlwith a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH	0 %	—	31.12.2022
ex84818079ex84818099	3030	Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:a withstanding pressure of the valve body of 6,3 MPa,a leakage ratio of less than 1,6 g/a,an impurity ratio of less than 1,2 mg/PCS,an airtight pressure of the valve body of 4,2 MPa,for use in the manufacture of air conditioners	0 %	—	31.12.2023
ex84842000	20	Mechanical face sealing device made of two movable rings (one ceramic mating, having a thermal conductivity lower than 80W/Mk and the other carbon sliding), one spring and a nitrile sealant on the external side, of a kind used in manufacturing circulation pumps of cooling systems in motor vehicles	0 %	—	31.12.2023
ex85011010	30	Motors for air pumps, with:operating voltage of 9 VDC or more but not more than 24 VDC,operating temperature range of – 40 °C or more but not more than 80 °C,an output not exceeding 18 W,for use in the manufacture of pneumatic support and ventilation systems for car seats	0 %	—	31.12.2023
ex85013100ex85013200	5540	DC motor with or without commutator, withan external diameter of 24,2 mm or more, but not more than 140 mm,a rated speed of 3300 rpm or more, but not more than 26200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of more than 37,5 W, but not more than 2400 W,a free load current of not more than 20,1 A,a maximum efficiency of 50 % or more,for driving hand-held power tools or lawn mowers	0 %	—	31.12.2023
ex85013300	25	AC traction motor of an output of 75 kW or more but not more than 375 kW, with:a torque output of 200 Nm or more but not more than 400 Nm,a power output of 50 kW or more but not more than 200 kW, anda speed of not more than 15000 rpm,for use in the manufacture of electric vehicles	0 %	—	31.12.2019
ex85030099	55	Stator for brushless motor, with:an internal diameter of 206,6 mm (± 0,5),an external diameter of 265,0 mm (± 0,2), anda width of 37,2 mm or more but not more than 47,8 mm,of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums	0 %	p/st	31.12.2020
ex85069000	10	Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)	0 %	—	31.12.2023
ex85076000	13	Prismatic lithium-ion electric accumulators with:a width of 173,0 mm (± 0,4 mm),a thickness of 45,0 mm (± 0,4 mm),a height 125,0 mm (± 0,3 mm),a nominal voltage of 3,67 V (± 0,01 V), anda nominal capacity of 94 Ah and/or 120 Ah,for use in the manufacture of rechargeable electric vehicle batteries	0 %	—	31.12.2019
ex85076000	15	Cylindrical lithium-ion-accumulators or modules with:a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,a nominal voltage of 36 V or more, but not more than 48 V,a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles	0 %	—	31.12.2019
ex85076000	18	Rectangular lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:a length of not more than 1600 mm,a width of not more than 448 mm,a height of not more than 395 mm,a weight of 125 kg or more but not more than 135 kg,a nominal voltage of 280 V or more but not more than 400 V,a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,a charging voltage of 110 V or more but not more than 230 V, andcontaining 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703	0 %	—	31.12.2019
ex85076000	30	Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries	0 %	—	31.12.2019
ex85076000	33	Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 1000 mm,a width of 100 mm or more, but not more than 1000 mm,a height of 200 mm or more, but not more than 1500 mm,a weight of 75 kg or more, but not more than 200 kg,a nominal capacity not less than 150 Ah and not more than 500 Ah	0 %	—	31.12.2019
ex85076000	50	Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 408 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 138 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda power of 458 Wh or more, but not more than 2158 Wh	0 %	—	31.12.2019
ex85076000	71	Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mm,a width of 935 mm or more, but not more than 1660 mm,a height of 85 mm or more, but not more than 700 mm,a weight of 250 kg or more, but not more than 700 kg,a power of not more than 175 kWh	0 %	—	31.12.2019
ex85076000	85	Lithium-ion Rectangular modules for incorporation in lithium-ion rechargeable batteries:of a length of 300 mm or more, but not more than 350 mm,of a width of 79,8 mm or more, but not more than 225 mm,of a height of 35 mm or more, but not more than 168 mm,of a weight of 3,95 kg or more, but not more than 8,85 kg,with a rating of 66,6 Ah or more, but not more than 129 Ah	0 %	—	31.12.2019
ex85079030	20	Safety Reinforced Separator designed to separate cathode and anode in lithium-ion electric accumulators for use in the manufacture of lithium-ion electric accumulators for motor vehicle batteries	0 %	—	31.12.2019
ex85299065	25	Printed circuit board assembly comprising:a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,a microprocessor capable of receiving remote control messages and controlling the tuner chipset,for use in the manufacture of home entertainment systems	0 %	p/st	31.12.2019
ex85299065	28	Electronic assembly comprising at least a printed circuit board with:processors for multi-media applications and video signal processing,FPGA (Field Programmable Gate Array),Flash memory,operating memory,USB-interface,with or without HDMI, VGA- and RJ-45 interfaces,sockets and plugs for connecting a LCD-display, a LED lighting and a control panel	0 %	p/st	31.12.2020
ex85299065	40	Printed circuit board subassembly, comprising:a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,a radio frequency (RF) remote control receiver,an infrared remote control signal transmitter,a SCART signal generator,a TV state sensor,for use in the manufacture of home entertainment systems	0 %	p/st	31.12.2019
ex85299092	52	LCD module, glass or plastic covered and optically bonded, witha diagonal measurement of the screen of 12 cm or more but not more than 31 cm,LED backlighting,a printed circuit board with EEPROM (Electrically Erasable Programmable Read-Only Memory), microcontroller, timing controller and other active and passive components,a plug for power supply and CAN (Controller Area Network) and LVDS (Low Voltage Differential Signalling) interfaces,whether or not with electronic components to generate additional control indicators for vehicle information on the display,	0 %	—	31.12.2023
		with or without a touch screen,without a signal processing module,in a housing with additional LED indicators for warning lights,with or without a gear shift indicator and a photo sensor,of a kind used as a driver information display in motor vehicles of Chapter 87
ex85299092	54	LCD display with:a touch panel,at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings,a diagonal screen measurement of 15 cm or more but not more than 21 cm,a backlight,a LVDS (Low Voltage Differential Signalling) and a power supply connector,for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2023
ex85299092	57	Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players	0 %	p/st	31.12.2021
ex85359000	30	Semiconductor module switch in a casing:consisting of an IGBT transistor chip and a diode chip on one or more lead frames,for a voltage of 600 V or 1200 V	0 %	p/st	31.12.2020
ex85371091	57	Programmable memory control board with:4 or more stepper motor drivers,4 or more outputs with MOSFET transistors,a main processor,3 or more inputs for temperature sensors,for a voltage of 10 V or more but not more than 30 V,for use in the manufacture of 3D printers	0 %	—	31.12.2023
ex85371091	59	Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:a printed circuit board with programmable memory controller,one single connector, andworking at 12 V	0 %	—	31.12.2023
ex85371091	63	Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:a printed circuit board with programmable memory controller,a metallic housing,one single connector,working at 12 V	0 %	—	31.12.2023
ex85371091	67	Electronic Engine Control Unit (ECU) with:a printed circuit board (PCB),12 Volts voltage,reprogrammable,a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate),for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
ex87084020ex87084050	6050	Automatic transmission assembly with rotary gear shifter with:aluminium casting housing,differential gear,9 Speed automatic,electronic range select gear selection system,with dimensions of:a width of 330 mm or more but not more than 420 mm,a height of 380 mm or more but not more than 450 mm,a length of 580 mm or more but not more than 690 mm,for use in the manufacture of the vehicles in heading 87	0 %	—	31.12.2023
ex87085020ex87085099ex87089910ex87089997	60154565	Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising at least:an actuator, andan interior distribution by chain	0 %	—	31.12.2019
ex87085020ex87085099	6520	Intermediate steel shaft connecting the gearbox with semi-axle with:a length of 300 mm or more but not more than 650 mm,a spline end on both sides,whether or not with a pressed bearing in the case,whether or not with a holder,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2023
ex87085020ex87085099	7025	Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:an outer diameter of 67,0 mm or more but not more than 84,5 mm,3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,spline with 21 teeth or more but not more than 35,bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves	0 %	—	31.12.2023
ex87085020ex87085099	7535	Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, andwith a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees	0 %	—	31.12.2023
ex87088099	20	Aluminium suspension link arm, with dimensions of:a height of 50 mm or more but not more than 150 mm,a width of 10 mm or more but not more than 100 mm,a length of 100 mm or more but not more than 600 mm,a mass of 1000 g or more but not more than 3000 g,equipped with at least two bushed holes made of aluminium alloy with the following characteristics:a tensile strength of 200 mPa or more,a strength of 19 kN or more,a stiffness of 5 kN/mm or more but not more than 9 kN/mm,a frequency of 400 Hz or more but not more than 600 Hz	0 %	—	31.12.2023
ex87089299	10	Exhaust system inner liner:with a wall thickness of 0,7 mm or more but not more than 1,3 mm,made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,whether or not with mounting holes,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
ex87089299	20	Pipe for guiding exhaust gases from the combustion engine:with a diameter of 40 mm or more but not more than 100 mm,with a length of 90 mm or more but not more than 410 mm,with a wall thickness of 0,7 mm or more but not more than 1,3 mm,of stainless steel,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
ex87089299	30	Exhaust system end cover:with a wall thickness of 0,7 mm or more but not more than 1,3 mm,made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,whether or not with inner liner,whether or not with surface treatment,for use in the manufacture of exhaust systems for automobiles	0 %	—	31.12.2023
ex90019000	55	Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut	0 %	—	31.12.2023
ex90021100	15	Infrared lens with motorised focus adjustment,using wavelengths of 3 μm or more but not more than 5 μm,providing a clear picture from 50 m to infinity,with fields of vision sizes of 3° × 2,25° and 9° × 6,75°,with a weight of not more than 230 g,with a length of not more than 88 mm,with a diameter of not more than 46 mm,athermalized,for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes	0 %	—	31.12.2020
ex90021100	18	Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:a horizontal field of view range to a maximum of 120 deg,a diagonal field of view range to a maximum of 92 deg,a focal length to a maximum of 7,50 mm,a relative aperture of a maximum of F/2,90,a maximum diameter of 22 mm,of a kind used for the production of CMOS (Complementary metal–oxide-semiconductor) automotive cameras	0 %	—	31.12.2023
ex90021100	25	Infrared optical unit composed ofa monocrystalline silicon lens with a diameter of 84 mm (± 0,1 mm), anda monocrystalline germanium lens with a diameter of 62 mm (± 0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100	35	Infrared optical unit composed ofa silicon lens with a diameter of 29 mm (± 0,05 mm), anda monocrystalline calcium fluoride lens with a diameter of 26 mm (± 0,05 mm),assembled on a machined aluminium alloy support, of kind a used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100	45	Infrared optical unitwith a silicon lens of a diameter of 62 mm (± 0,05 mm),mounted on a machined aluminium alloy support,of a kind used for thermal cameras	0 %	—	31.12.2021
ex90021100	55	Infrared optical unit composed ofa germanium lens with a diameter of 11 mm (± 0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 14 mm (± 0,05 mm), anda silicon lens with a diameter of 17 mm (± 0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100	65	Infrared optical unitwith a silicon lens with a diameter of 26 mm (± 0,1 mm),mounted on a machined aluminium alloy support,of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100	75	Infrared optical unit composed ofa germanium lens with a diameter of 19 mm (± 0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 18 mm (± 0,05 mm),a germanium lens with a diameter of 20,6 mm (± 0,05 mm),assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90292031ex90299000	2030	Clustered instrument panel with the microprocessor control board, with or without stepping motors, and LED indicators showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019

Amendments and corrections
December 31, 2021	Implicitly repealed by 32021R2278
July 1, 2019	Application - See Art 2
June 20, 2019	Entry into force - Date pub. See Art 2

Council Regulation (EU) 2019/999 of 13 June 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products