Article 1The Annex to Regulation (EU) No 1387/2013 is replaced by the text set out in the Annex to this Regulation.

Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 January 2019.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 20 December 2018.For the CouncilThe PresidentE. KöstingerANNEX

However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)Only the ad valorem duty is suspended. The specific duty shall continue to apply.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htmThe expression "industrial assembly" refers to the production of new items in an assembly plant or manufacturing plant.New or amended position or position with prolonged validity

CN code	TARIC	Description	Rate of autonomous duty	Supplementary unit	Date foreseen for mandatory review
ex07095910	10	Fresh or chilled chanterelles for treatment other than simple repacking for retail sale	0 %	—	31.12.2020
ex07102100	10	Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals	0 %	—	31.12.2023
ex07108095	50	Bamboo shoots, frozen, not put up for retail sale	0 %	—	31.12.2023
ex07115900	11	Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry	0 %	—	31.12.2021
ex07123200ex07123300ex07123900	101031	Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale	0 %	—	31.12.2023
ex08041000	30	Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries	0 %	—	31.12.2023
0811905008119070		Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter	0 %	—	31.12.2023
ex08119095	70		0 %	—	31.12.2023
ex08119095	20	Boysenberries, frozen, not containing added sugar, not put up for retail sale	0 %	—	31.12.2023
ex08119095	30	Pineapple (Ananas comosus), in pieces, frozen	0 %	—	31.12.2023
ex08119095	40	Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter	0 %	—	31.12.2023
ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930	202020202020	Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100,goods of heading 3401, orfatty acids with high purity of heading 2915	0 %	—	31.12.2019
ex15121910	10	Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of:conjugated linoleic acid of heading 3823, orethyl- or methyl esters of linoleic acid of heading 2916	0 %	—	31.12.2020
ex15159099	92	Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid	0 %	—	31.12.2023
ex15162096	20	Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process	0 %	—	31.12.2019
ex15179099	10	Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)	0 %	—	31.12.2021
ex19019099ex21069098	3945	Preparation in powder form containing by weight:15 % or more but not more than 35 % of wheat derived Maltodextrin,15 % or more but not more than 35 % of whey (milk serum),10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,10 % or more but not more than 30 % of blended, aged spray dried cheese,5 % or more but not more than 15 % of buttermilk, and0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid	0 %	—	31.12.2023
ex19023010ex19030000	1020	Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale	0 %	—	31.12.2023
ex20059100	10	Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg	0 %	—	31.12.2023
ex20079950ex20079950ex20079993	839310	Mango puree concentrate, obtained by cooking:of the Genus Mangifera spp.,with a sugar content by weight of not more than 30 %,for use in the manufacture of products of food and drink industry	6 %	—	31.12.2022
ex20079950ex20079950	8494	Papaya puree concentrate, obtained by cooking:of the Genus Carica spp.,with a sugar content by weight of more than 13 % but not more than 30 %,for use in the manufacture of products of food and drink industry	7,8 %	—	31.12.2022
ex20079950ex20079950	8595	Guava puree concentrate, obtained by cooking:of the Genus Psidium spp.,with a sugar content by weight of more than 13 % but not more than 30 %,for use in the manufacture of products of food and drink industry	6 %	—	31.12.2022
ex20089391	20	Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries	0 %	—	31.12.2022
ex20089948	94	Mango puree:not from concentrate,of the genus Mangifera,of a Brix value of 14 or more, but not more than 20,used in the manufacture of products of drink industry	6 %	—	31.12.2020
ex20089949ex20089999	3040	Seedless boysenberry puree not containing added spirit, whether or not containing added sugar	0 %	—	31.12.2019
ex20089949ex20089999	7011	Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:more than 6 % of salt concentration,0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate, andwhether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995,for use in the manufacture of stuffed vine leaves with rice	0 %	—	31.12.2022
ex20089991	20	Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking	0 %	—	31.12.2020
ex20094192ex20094199	2070	Pineapple juice:not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry	8 %	—	31.12.2020
ex20094930	91	Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than EUR 30 per 100 kg net weight,containing added sugar,used in the manufacture of products of food or drink industry	0 %	—	31.12.2019
ex20098131	10	Cranberry juice concentrate:of a Brix value of 40 or more but not more than 66,in immediate packings of a content of 50 litres or more	0 %	—	31.12.2019
ex20098973ex20098973	1113	Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 13,7 or more but not more than 55,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwith added sugar,for the use in the manufacture of products of food or drink industry	0 %	—	31.12.2019
ex20098979	20	Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more	0 %	—	31.12.2021
ex20098979	30	Frozen acerola juice concentrate:with a Brix value of more than 48 but not more than 67,in immediate packings of a content of 50 litres or more	0 %	—	31.12.2023
ex20098979	85	Acai berry juice concentrate:of the species Euterpe oleracea,frozen,not sweetened,not in powder form,of a Brix value of 23 or more but not more than 32,in immediate packings of a content of 10 kg or more	0 %	—	31.12.2021
ex20098997ex20098997	2129	Passion fruit juice and passion fruit juice concentrate, whether or not frozen:with a Brix value of 10 or more but not more than 13,7,of a value of more than EUR 30 per 100 kg net weight,in immediate packings of a content of 50 litres or more, andwithout added sugar,for the use in the manufacture of products of food or drink industry	0 %	—	31.12.2019
ex20098999	96	Coconut waterunfermented,not containing added spirit or sugar, andin immediate packing of a content of 20 litres or more	0 %	—	31.12.2021
ex21061020	20	Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form	0 %	—	31.12.2023
ex21061020	30	Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate	0 %	—	31.12.2023
ex21069092	45	Preparation containing by weight:more than 30 % but not more than 35 % licorice extract,more than 65 % but not more than 70 % tricaprylin,standardised by weight to 3 % or more but not more than 4 % glabridin	0 %	—	31.12.2021
ex21069092	50	Casein protein hydrolysate consisting of:by weight 20 % or more but not more than 70 % free amino acids, andpeptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da	0 %	—	31.12.2022
ex21069098	47	Preparation, having a moisture content of 1 % or more but not more than 4 %, and containing by weight:15 % or more but not more than 35 % of buttermilk,20 % (± 10 %) of lactose,20 % (± 10 %) of whey protein concentrate,15 % (± 10 %) of cheddar cheese,3 % (± 2 %) of salt,0,1 % or more but not more than 10 % of lactic acid E270,0,1 % or more but not more than 10 % of gum arabic E414,for use in the manufacture of products of food and drink industry	0 %	—	31.12.2022
ex25199010	10	Fused magnesia with a purity by weight of 94 % or more	0 %	—	31.12.2021
ex27075000ex27079980	2010	Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %	0 %	—	31.12.2019
ex27079999	10	Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27	0 %	—	31.12.2023
ex27101981ex27101999	1030	Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,with a viscosity index of 80 or more	0 %	—	31.12.2023
ex27101999	20	Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:not more than 1 mg/kg of sulphur,more than 99 % by weight of saturated hydrocarbons,more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50, anda kinematic viscosity at 40 °C of more than 6,5 mm2/s, ora kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more	0 %	—	31.12.2019
ex27129099	10	Blend of 1-alkenes (alpha-olefins) (CAS RN 131459-42-2) containing by weight 80 % or more of 1-alkenes of a chain length of 24 carbon atoms or more but not exceeding 64 carbon atoms containing by weight more than 72 % 1-alkenes with more than 28 carbon atoms	0 %	—	31.12.2022
ex28045090	40	Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis	0 %	—	31.12.2023
28047000		Phosphorus	0 %	—	31.12.2023
ex28051200	10	Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)	0 %	—	31.12.2020
ex28051990	20	Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more	0 %	—	31.12.2022
ex28053010	10	Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium	0 %	—	31.12.2023
280530202805303028053040		Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more	0 %	—	31.12.2020
ex28111980	10	Sulphamidic acid (CAS RN 5329-14-6)	0 %	—	31.12.2023
ex28111980	20	Hydrogen iodide (CAS RN 10034-85-2)	0 %	—	31.12.2021
ex28112200	10	Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges	0 %	—	31.12.2023
ex28112200	15	Amorphous silicon dioxide (CAS RN 60676-86-0):in the form of powderof a purity by weight of 99,0 % or morewith a median grain size of 0,7 μm or more, but not more than 2,1 μmwhere 70 % of the particles have a diameter of not more than 3 μm	0 %	—	31.12.2020
ex28112200	60	Calcined amorphous silicon dioxide powder:with a particle size of not more than 20 μm, andof a kind used in the production of polyethylene	0 %	—	31.12.2019
ex28112990	10	Tellurium dioxide (CAS RN 7446-07-3)	0 %	—	31.12.2022
ex28129000	10	Nitrogen trifluoride (CAS RN 7783-54-2)	0 %	—	31.12.2023
ex28164000	10	Barium hydroxide (CAS RN 17194-00-2)	0 %	—	31.12.2022
ex28181091	20	Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:94 % or more, but less than 98,5 % of aluminium oxide,2 % (± 1,5 %) of magnesium oxide,1 % (± 0,6 %) of yttrium oxide,andeither 2 % (± 1,2 %) of lanthanum oxide, or2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm	0 %	—	31.12.2020
ex28182000	10	Activated alumina with a specific surface area of at least 350 m2/g	0 %	—	31.12.2019
ex28183000	20	Aluminium hydroxide (CAS RN 21645-51-2):in the form of powderwith a purity by weight of 99,5 % or morewith a decomposition point of 263 °C or morewith a particle size of 4 μm (± 1 μm)with a Total-Na2O-content by weight of not more than 0,06 %	0 %	—	31.12.2020
ex28183000	30	Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)	0 %	—	31.12.2023
ex28199090	10	Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy	0 %	—	31.12.2021
ex28230000	10	Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 0,7 μm or more but not more than 2,1 μm	0 %	—	31.12.2022
ex28251000	10	Hydroxylammonium chloride (CAS RN 5470-11-1)	0 %	—	31.12.2022
28253000		Vanadium oxides and hydroxides	0 %	—	31.12.2021
ex28255000	20	Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride	0 %	—	31.12.2023
ex28255000	30	Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm	0 %	—	31.12.2020
ex28256000	10	Zirconium dioxide (CAS RN 1314-23-4)	0 %	—	31.12.2022
ex28257000	10	Molybdenum trioxide (CAS RN 1313-27-5)	0 %	—	31.12.2021
ex28257000	20	Molybdic Acid (CAS RN 7782-91-4)	0 %	—	31.12.2021
ex28261990	10	Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more	0 %	—	31.12.2020
ex28269080	10	Lithium hexafluorophosphate (1-) (CAS RN 21324-40-3)	0 %	—	31.12.2023
ex28269080	20	Lithium difluorophosphate (CAS RN 24389-25-1)	0 %	—	31.12.2023
ex28273985	10	Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %	0 %	—	31.12.2023
ex28273985	20	Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more	0 %	—	31.12.2021
ex28273985	40	Barium chloride dihydrate (CAS RN 10326-27-9)	0 %	—	31.12.2023
ex28274990	10	Hydrated zirconium dichloride oxide	0 %	—	31.12.2023
ex28276000	10	Sodium iodide (CAS RN 7681-82-5)	0 %	—	31.12.2019
ex28301000	10	Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight	0 %	—	31.12.2023
ex28332980	20	Manganese sulphate monohydrate (CAS RN 10034-96-5)	0 %	—	31.12.2023
ex28332980	30	Zirconium sulphate (CAS RN 14644-61-2)	0 %	—	31.12.2020
ex28351000	10	Sodium hypophosphite monohydrate (CAS RN 10039-56-2)	0 %	—	31.12.2022
ex28351000	20	Sodium hypophosphite (CAS RN 7681-53-0)	0 %	—	31.12.2023
ex28351000	30	Aluminium Phosphinate (CAS RN 7784-22-7)	0 %	—	31.12.2023
ex28369100	20	Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:2 mg/kg or more of arsenic,200 mg/kg or more of calcium,200 mg/kg or more of chlorides,20 mg/kg or more of iron,150 mg/kg or more of magnesium,20 mg/kg or more of heavy metals,300 mg/kg or more of potassium,300 mg/kg or more of sodium,200 mg/kg or more of sulphates,determined according to the methods specified in the European Pharmacopœia	0 %	—	31.12.2023
ex28369917	30	Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more	0 %	—	31.12.2023
ex28371900	20	Copper cyanide (CAS RN 544-92-3)	0 %	—	31.12.2023
ex28372000	10	Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)	0 %	—	31.12.2021
ex28391900	10	Disodium disilicate (CAS RN 13870-28-5)	0 %	—	31.12.2022
ex28399000	20	Calcium silicate (CAS RN 1344-95-2)	0 %	—	31.12.2023
ex28402090	10	Zinc borate (CAS RN 12767-90-7)	0 %	—	31.12.2020
ex28415000	10	Potassium dichromate (CAS RN 7778-50-9)	0 %	—	31.12.2022
ex28417000	10	Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)	0 %	—	31.12.2023
ex28417000	20	Diammonium tridecaoxotetramolybdate(2-) (CAS RN 12207-64-6)	0 %	—	31.12.2019
ex28417000	30	Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)	0 %	—	31.12.2019
ex28417000	40	Diammonium dimolybdate (CAS RN 27546-07-2)	0 %	—	31.12.2021
ex28418000	10	Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)	0 %	—	31.12.2022
ex28419030	10	Potassium metavanadate (CAS RN 13769-43-2)	0 %	—	31.12.2022
ex28419085	10	Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %	0 %	—	31.12.2022
ex28419085	20	Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more	0 %	—	31.12.2023
ex28421000	10	Synthetic beta zeolite powder	0 %	—	31.12.2023
ex28421000	20	Synthetic chabasite zeolite powder	0 %	—	31.12.2019
ex28421000	40	Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations	0 %	—	31.12.2021
ex28421000	50	Fluorphlogopite (CAS RN 12003-38-2)	0 %	—	31.12.2022
ex28429010	10	Sodium selenate (CAS RN 13410-01-0)	0 %	—	31.12.2019
ex28429080	30	Aluminum trititanium dodecachloride (CAS RN 12003-13-3)	0 %	—	31.12.2022
28451000		Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)	0 %	—	31.12.2023
28459010		Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)	0 %	—	31.12.2023
ex28459090	10	Helium-3 (CAS RN 14762-55-1)	0 %	—	31.12.2021
ex28459090	20	Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)	0 %	—	31.12.2023
ex28459090	30	(13C)Carbon monoxide (CAS RN 1641-69-6)	0 %	—	31.12.2021
ex28461000ex38249996	1053	Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight	0 %	—	31.12.2023
ex28461000	20	Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated	0 %	—	31.12.2023
ex28461000	30	Cerium lanthanum carbonate, whether or not hydrated	0 %	—	31.12.2023
28469010284690202846903028469090		Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 28461000	0 %	—	31.12.2023
ex28500020	10	Silane (CAS RN 7803-62-5)	0 %	—	31.12.2023
ex28500020	20	Arsine (CAS RN 7784-42-1)	0 %	—	31.12.2023
ex28500020	30	Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm	0 %	—	31.12.2022
ex28500020	40	Germanium tetrahydride (CAS RN 7782-65-2)	0 %	—	31.12.2021
ex28500020	60	Disilane (CAS RN 1590-87-0)	0 %	—	31.12.2022
ex28500020	70	Cubic Boron nitride (CAS RN 10043-11-5)	0 %	—	31.12.2023
ex28500060	10	Sodium azide (CAS RN 26628-22-8)	0 %	—	31.12.2023
ex28539090	20	Phosphine (CAS RN 7803-51-2)	0 %	—	31.12.2023
ex29033919	20	5-Bromopent-1-ene (CAS RN 1119-51-3)	0 %	—	31.12.2022
29033921		Difluoromethane (CAS RN 75-10-5)	0 %	—	31.12.2020
ex29033924	10	Pentafluoroethane (CAS RN 354-33-6)	0 %	—	31.12.2019
ex29033926	10	1,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification:not more than 600 ppm by weight of R134 (1,1,2,2-tetrafluoroethane),not more than 5 ppm by weight of R143a (1,1,1-trifluoroethane),not more than 2 ppm by weight of R125 (pentafluoroethane),not more than 100 ppm by weight of R124 (1-chloro-1,2,2,2-tetrafluoroethane),not more than 30 ppm by weight of R114 (1,2-dichlorotetrafluoroethane),not more than 50 ppm by weight of R114a (1,1-Dichlorotetrafluoroethane),not more than 250 ppm by weight of R133a (1-Chloro-2,2,2-Trifluoroethane),not more than 2 ppm by weight of R22 (Chlorodifluoromethane),not more than 2 ppm by weight of R115 (Chloropentafluoroethane),not more than 2 ppm by weight of R12 (Dichlorodifluoromethane),not more than 20 ppm by weight of R40 (Methyl chloride),not more than 20 ppm by weight of R245cb (1,1,1,2,2-pentafluoropropane),not more than 20 ppm by weight of R12B1 (Chlorodifluorobromomethane),not more than 20 ppm by weight of R32 (Difluoromethane),not more than 15 ppm by weight of R31 (Chlorofluoromethane),not more than 10 ppm by weight of R152a (1,1-Difluoroethane),not more than 20 ppm by weight of 1131 (1-Chloro-2 Fluoroethylene),not more than 20 ppm by weight of 1122 (1-Chloro-2,2-Difluoroethylene),not more than 3 ppm by weight of 1234yf (2,3,3,3-Tetrafluoropropene),not more than 3 ppm by weight of 1243zf (3,3,3 Trifluoropropene),not more than 3 ppm by weight of 1122a (1-chloro-1,2-difluoroethylene),not more than 4,5 ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene),not more than 3 ppm by weight of any individual unspecified/unknown chemical,not more than 10 ppm by weight of all unspecified/unknown chemicals combined,not more than 10 ppm by weight of Water,with an acidity level of not more than 0,1 ppm by weight,without Halides,not more than 0,01 % by volume of High Boilers,without any odour (no malodour),for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2)	0 %	—	31.12.2019
ex29033927	10	1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)	0 %	—	31.12.2023
ex29033928	10	Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)	0 %	—	31.12.2023
ex29033928	20	Perfluoroethane (CAS RN 76-16-4)	0 %	—	31.12.2023
ex29033929	10	1H-Perfluorohexane (CAS RN 355-37-3)	0 %	—	31.12.2023
29033931		2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)	0 %	—	31.12.2022
ex29033935	20	Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)	0 %	—	31.12.2023
ex29033939	10	Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)	0 %	—	31.12.2021
ex29033939	20	(Perfluorobutyl) ethylene (CAS RN 19430-93-4)	0 %	—	31.12.2023
ex29033939	30	Hexafluoropropene (CAS RN 116-15-4)	0 %	—	31.12.2021
ex29033939	40	1,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2)	0 %	—	31.12.2022
ex29037400	10	2-Chloro-1,1-difluoroethane (CAS RN 338-65-8)	0 %	—	31.12.2020
ex29037760	10	1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)	0 %	—	31.12.2023
ex29037790	10	Chlorotrifluoroethylene (CAS RN 79-38-9)	0 %	—	31.12.2021
ex29037800	10	Octafluoro-1,4-diiodobutane (CAS RN 375-50-8)	0 %	—	31.12.2023
ex29037930	10	Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)	0 %	—	31.12.2019
ex29038980	10	1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9)	0 %	—	31.12.2023
ex29038980	40	Hexabromocyclododecane	0 %	—	31.12.2021
ex29038980	50	Chlorocyclopentane (CAS RN 930-28-9)	0 %	—	31.12.2022
ex29038980	60	Octafluorocyclobutane (CAS RN 115-25-3)	0 %	—	31.12.2022
ex29039980	15	4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)	0 %	—	31.12.2020
ex29039980	20	1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)	0 %	—	31.12.2023
ex29039980	40	2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:0,001 mg/kg or less of tetrachlorodibenzodioxines,0,001 mg/kg or less of tetrachlorodibenzofurans,0,2 mg/kg or less of tetrachlorobiphenyls	0 %	—	31.12.2023
ex29039980	50	Fluorobenzene (CAS RN 462-06-6)	0 %	—	31.12.2023
ex29039980	60	1,1′-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1)	0 %	—	31.12.2022
ex29039980	75	3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)	0 %	—	31.12.2019
ex29039980	80	1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)	0 %	—	31.12.2023
ex29041000	30	Sodium p-styrenesulphonate (CAS RN 2695-37-6)	0 %	—	31.12.2019
ex29041000	50	Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)	0 %	—	31.12.2019
ex29042000	10	Nitromethane (CAS RN 75-52-5)	0 %	—	31.12.2020
ex29042000	20	Nitroethane (CAS RN 79-24-3)	0 %	—	31.12.2020
ex29042000	30	1-Nitropropane (CAS RN 108-03-2)	0 %	—	31.12.2020
ex29042000	40	2-Nitropropane (CAS RN 79-46-9)	0 %	—	31.12.2019
ex29049100	10	Trichloronitromethane (CAS RN 76-06-2), for the manufacture of goods of subheading 380892	0 %	—	31.12.2019
ex29049900	20	1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)	0 %	—	31.12.2019
ex29049900	25	Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)	0 %	—	31.12.2020
ex29049900	30	Tosyl chloride (CAS RN 98-59-9)	0 %	—	31.12.2019
ex29049900	35	1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)	0 %	—	31.12.2020
ex29049900	40	4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)	0 %	—	31.12.2022
ex29049900	45	2-Nitrobenzenesulfonyl Chloride (CAS RN 1694-92-4)	0 %	—	31.12.2023
ex29049900	50	Ethanesulphonyl chloride (CAS RN 594-44-5)	0 %	—	31.12.2023
ex29049900	60	4,4′-Dinitrostilbene-2,2′-disulfonic acid (CAS RN 128-42-7)	0 %	—	31.12.2019
ex29049900	70	1-Chloro-4-nitrobenzene (CAS RN 100-00-5)	0 %	—	31.12.2019
ex29049900	80	1-Chloro-2-nitrobenzene (CAS RN 88-73-3)	0 %	—	31.12.2019
ex29051100	10	Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more	0 %	—	31.12.2023
ex29051100ex29051900	2035	Methyl methanesulphonate (CAS RN 66-27-3)	0 %	—	31.12.2021
ex29051900	11	Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN	0 %	—	31.12.2023
ex29051900	20	Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7)	0 %	—	31.12.2023
ex29051900	25	Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)	0 %	—	31.12.2023
ex29051900	30	2,6-Dimethylheptan-4-ol (CAS RN 108-82-7)	0 %	—	31.12.2023
ex29051900	40	2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)	0 %	—	31.12.2019
ex29051900	70	Titanium tetrabutanolate (CAS RN 5593-70-4)	0 %	—	31.12.2022
ex29051900	80	Titanium tetraisopropoxide (CAS RN 546-68-9)	0 %	—	31.12.2022
ex29051900	85	Titanium tetraethanolate (CAS RN 3087-36-3)	0 %	—	31.12.2023
ex29052200	10	Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)	0 %	—	31.12.2019
ex29052200	20	3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)	0 %	—	31.12.2021
ex29052990	10	Cis-hex-3-en-1-ol (CAS RN 928-96-1)	0 %	—	31.12.2022
ex29053995	10	Propane-1,3-diol (CAS RN 504-63-2)	0 %	—	31.12.2020
ex29053995	20	Butane-1,2-diol (CAS RN 584-03-2)	0 %	—	31.12.2022
ex29053995	30	2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)	0 %	—	31.12.2021
ex29053995	40	Decane-1,10-diol (CAS RN 112-47-0)	0 %	—	31.12.2022
ex29053995	50	2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)	0 %	—	31.12.2023
ex29054900	10	Ethylidynetrimethanol (CAS RN 77-85-0)	0 %	—	31.12.2020
ex29055998	20	2,2,2-Trifluoroethanol (CAS RN 75-89-8)	0 %	—	31.12.2019
ex29061900	10	Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)	0 %	—	31.12.2023
ex29061900	20	4,4′-Isopropylidenedicyclohexanol (CAS RN 80-04-6)	0 %	—	31.12.2023
ex29061900	50	4-tert-Butylcyclohexanol (CAS RN 98-52-2)	0 %	—	31.12.2019
ex29062900	20	1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)	0 %	—	31.12.2023
ex29062900	30	2-Phenylethanol (CAS RN 60-12-8)	0 %	—	31.12.2022
ex29062900	40	2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)	0 %	—	31.12.2020
ex29062900	50	2,2′-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5)	0 %	—	31.12.2022
ex29071200	20	Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more	0 %	—	31.12.2019
ex29071200	30	p-Cresol (CAS RN 106-44-5)	0 %	—	31.12.2019
ex29071590	10	2-Naphthol (CAS RN 135-19-3)	0 %	—	31.12.2021
ex29071910	10	2,6-Xylenol (CAS RN 576-26-1)	0 %	—	31.12.2019
ex29071990	20	Biphenyl-4-ol (CAS RN 92-69-3)	0 %	—	31.12.2023
ex29072100	10	Resorcinol (CAS RN 108-46-3)	0 %	—	31.12.2023
ex29072900	15	6,6′-Di-tert-butyl-4,4′-butylidenedi-m-cresol (CAS RN 85-60-9)	0 %	—	31.12.2023
ex29072900	20	4,4′-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)	0 %	—	31.12.2023
ex29072900	25	4-Hydroxybenzyl alcohol (CAS RN 623-05-2)	0 %	—	31.12.2019
ex29072900	30	4,4′,4″-Ethylidynetriphenol (CAS RN 27955-94-8)	0 %	—	31.12.2023
ex29072900	45	2-Methylhydroquinone (CAS RN 95-71-6)	0 %	—	31.12.2021
ex29072900	50	6,6′,6″-Tricyclohexyl-4,4′,4″-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)	0 %	—	31.12.2023
ex29072900	65	2,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)	0 %	—	31.12.2019
ex29072900	70	2,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)	0 %	—	31.12.2023
ex29072900	75	Biphenyl-4,4′-diol (CAS RN 92-88-6)	0 %	—	31.12.2023
ex29072900	85	Phloroglucinol whether or not hydrated	0 %	—	31.12.2023
ex29081900	10	Pentafluorophenol (CAS RN 771-61-9)	0 %	—	31.12.2023
ex29081900	20	4,4′-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)	0 %	—	31.12.2023
ex29081900	30	4-Chlorophenol (CAS RN 106-48-9)	0 %	—	31.12.2019
ex29081900	40	3,4,5-Trifluorophenol (CAS RN 99627-05-1)	0 %	—	31.12.2020
ex29081900	50	4-Fluorophenol (CAS RN 371-41-5)	0 %	—	31.12.2020
ex29091990	20	Bis(2-chloroethyl) ether (CAS RN 111-44-4)	0 %	—	31.12.2023
ex29091990	30	Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more	0 %	—	31.12.2023
ex29091990	50	3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)	0 %	—	31.12.2021
ex29092000	10	8-Methoxycedrane (CAS RN 19870-74-7)	0 %	—	31.12.2021
ex29093038	10	Bis(pentabromophenyl) ether (CAS RN 1163-19-5)	0 %	—	31.12.2023
ex29093038	20	1,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)	0 %	—	31.12.2021
ex29093038	30	1,1′-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)	0 %	—	31.12.2020
ex29093038	40	4-Benzyloxybromobenzene (CAS RN 6793-92-6)	0 %	—	31.12.2023
ex29093090	10	2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)	0 %	—	31.12.2019
ex29093090	15	{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)	0 %	—	31.12.2021
ex29093090	20	1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)	0 %	—	31.12.2019
ex29093090	25	1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane	0 %	—	31.12.2021
ex29093090	30	3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)	0 %	—	31.12.2020
ex29093090	40	1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)	0 %	—	31.12.2020
ex29093090	50	1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)	0 %	—	31.12.2020
ex29093090	60	1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)	0 %	—	31.12.2020
ex29093090	70	O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)	0 %	—	31.12.2021
ex29093090	80	Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more	0 %	—	31.12.2021
ex29094980	10	1-Propoxypropan-2-ol (CAS RN 1569-01-3)	0 %	—	31.12.2020
ex29095000	10	4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)	0 %	—	31.12.2023
ex29095000	20	Ubiquinol (CAS RN 992-78-9)	0 %	—	31.12.2020
ex29096000	10	Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)	0 %	—	31.12.2023
ex29096000	30	3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons	0 %	—	31.12.2019
ex29109000	15	1,2-Epoxycyclohexane (CAS RN 286-20-4)	0 %	—	31.12.2023
ex29109000	30	2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)	0 %	—	31.12.2023
ex29109000	50	2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)	0 %	—	31.12.2020
ex29109000	80	Allyl glycidyl ether (CAS RN 106-92-3)	0 %	—	31.12.2021
ex29110000	10	Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2)	0 %	—	31.12.2020
ex29121900	10	Undecanal (CAS RN 112-44-7)	0 %	—	31.12.2021
ex29122900	15	2,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)	0 %	—	31.12.2021
ex29122900	25	Mixture of isomers consisting of:85 (± 10) % by weight of 4-isobutyl-2-methylbenzaldehyde (CAS RN 73206-60-7)15 (± 10) % by weight of 2-isobutyl-4-methyllbenzaldehyde (CAS RN 68102-28-3)	0 %	—	31.12.2021
ex29122900	35	Cinnamaldehyde (CAS RN 104-55-2)	0 %	—	31.12.2022
ex29122900	45	p-Phenylbenzaldehyde (CAS RN 3218-36-8)	0 %	—	31.12.2022
ex29122900	50	4-Isobutylbenzaldehyde (CAS RN 40150-98-9)	0 %	—	31.12.2023
ex29122900	70	4-tert-Butylbenzaldehyde (CAS RN 939-97-9)	0 %	—	31.12.2023
ex29122900	80	4-Isopropylbenzaldehyde (CAS RN 122-03-2)	0 %	—	31.12.2023
ex29124900	10	3-Phenoxybenzaldehyde (CAS RN 39515-51-0)	0 %	—	31.12.2023
ex29124900	20	4-Hydroxybenzaldehyde (CAS RN 123-08-0)	0 %	—	31.12.2022
ex29124900	30	Salicylaldehyde (CAS RN 90-02-8)	0 %	—	31.12.2020
ex29124900	40	3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)	0 %	—	31.12.2020
ex29124900	50	2,6-dihydroxybenzaldehyde (CAS RN 387-46-2)	0 %	—	31.12.2022
ex29141990	20	Heptan-2-one (CAS RN 110-43-0)	0 %	—	31.12.2022
ex29141990	30	3-Methylbutanone (CAS RN 563-80-4)	0 %	—	31.12.2022
ex29141990	40	Pentan-2-one (CAS RN 107-87-9)	0 %	—	31.12.2022
ex29141990	60	Zinc acetylacetonate (CAS RN 14024-63-6)	0 %	—	31.12.2023
ex29142900	15	oestr-5(10)-ene-3,17-dione (CAS RN 3962-66-1)	0 %	—	31.12.2023
ex29142900	20	Cyclohexadec-8-enone (CAS RN 3100-36–5)	0 %	—	31.12.2023
ex29142900	25	Cyclohex-2-enone (CAS RN 930-68-7)	0 %	—	31.12.2023
ex29142900	30	(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)	0 %	—	31.12.2020
ex29142900	40	Camphor	0 %	—	31.12.2023
ex29142900	50	trans-β-Damascone (CAS RN 23726-91-2)	0 %	—	31.12.2021
ex29142900	70	2-sec-butylcyclohexanone (CAS RN 14765-30-1)	0 %	—	31.12.2022
ex29142900	80	1-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9)	0 %	—	31.12.2022
ex29143900	15	2,6-Dimethyl-1-indanone (CAS RN 66309-83-9)	0 %	—	31.12.2019
ex29143900	25	1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)	0 %	—	31.12.2019
ex29143900	30	Benzophenone (CAS RN 119-61-9)	0 %	—	31.12.2022
ex29143900	50	4-Phenylbenzophenone (CAS RN 2128-93-0)	0 %	—	31.12.2023
ex29143900	60	4-Methylbenzophenone (CAS RN 134-84-9)	0 %	—	31.12.2023
ex29143900	70	Benzil (CAS RN 134-81-6)	0 %	—	31.12.2022
ex29143900	80	4′-Methylacetophenone (CAS RN 122-00-9)	0 %	—	31.12.2022
ex29145000	20	3′-Hydroxyacetophenone (CAS RN 121-71-1)	0 %	—	31.12.2020
ex29145000	25	4′-Methoxyacetophenone (CAS RN 100-06-1)	0 %	—	31.12.2023
ex29145000	36	2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)	0 %	—	31.12.2023
ex29145000	40	4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)	0 %	—	31.12.2021
ex29145000	45	3,4-Dihydroxybenzophenone (CAS RN 10425-11-3)	0 %	—	31.12.2022
ex29145000	60	2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)	0 %	—	31.12.2022
ex29145000	65	3-Methoxyacetophenone (CAS RN 586-37-8)	0 %	—	31.12.2020
ex29145000	75	7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)	0 %	—	31.12.2020
ex29145000	80	2′,6′-Dihydroxyacetophenone (CAS RN 699-83-2)	0 %	—	31.12.2023
ex29145000	85	4,4′-Dihydroxybenzophenone (CAS RN 611-99-4)	0 %	—	31.12.2021
ex29146980	10	2-Ethylanthraquinone (CAS RN 84-51-5)	0 %	—	31.12.2023
ex29146980	20	2-Pentylanthraquinone (CAS RN 13936-21-5)	0 %	—	31.12.2019
ex29146980	30	1,4-Dihydroxyanthraquinone (CAS RN 81-64-1)	0 %	—	31.12.2023
ex29146980	40	p-Benzoquinone (CAS RN 106-51-4)	0 %	—	31.12.2021
ex29146980	50	Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)	0 %	—	31.12.2019
ex29147900	15	1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5)	0 %	—	31.12.2020
ex29147900	20	2,4′-Difluorobenzophenone (CAS RN 342-25-6)	0 %	—	31.12.2022
ex29147900	25	1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5)	0 %	—	31.12.2020
ex29147900	30	5-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7)	0 %	—	31.12.2023
ex29147900	35	1-[4-(benzyloxy)phenyl]-2-bromopropan-1-one (CAS RN 35081-45-9)	0 %	—	31.12.2023
ex29147900	40	Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)	0 %	—	31.12.2023
ex29147900	50	3′-Chloropropiophenone (CAS RN 34841-35-5)	0 %	—	31.12.2023
ex29147900	60	4′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1)	0 %	—	31.12.2020
ex29147900	65	1,4-bis(4-Fluorobenzoyl) Benzene (CAS RN 68418-51-9)	0 %	—	31.12.2021
ex29147900	70	4-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3)	0 %	—	31.12.2021
ex29147900	75	4,4′-Difluorobenzophenone (CAS RN 345-92-6)	0 %	—	31.12.2021
ex29147900	80	Tetrachloro-p-benzoquinone (CAS RN 118-75-2)	0 %	—	31.12.2023
ex29151200	10	Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)	0 %	—	31.12.2021
ex29153900	10	Cis-3-hexenyl acetate (CAS RN 3681-71-8)	0 %	—	31.12.2022
ex29153900	25	2-Methylcyclohexyl acetate (CAS RN 5726-19-2)	0 %	—	31.12.2023
ex29153900	30	4-tert-butylcyclohexyl acetate (CAS RN 32210-23-4)	0 %	—	31.12.2022
ex29153900	40	tert-Butyl acetate (CAS RN 540-88-5)	0 %	—	31.12.2023
ex29153900	50	3-Acetylphenyl acetate (CAS RN 2454-35-5)	0 %	—	31.12.2019
ex29153900	60	Dodec-8-enyl acetate (CAS RN 28079-04-1)	0 %	—	31.12.2020
ex29153900	65	Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)	0 %	—	31.12.2020
ex29153900	70	Dodec-9-enyl acetate (CAS RN 16974-11-1)	0 %	—	31.12.2020
ex29153900	75	Isobornyl acetate (CAS RN 125-12-2)	0 %	—	31.12.2021
ex29153900	80	1-Phenylethyl acetate (CAS RN 93-92-5)	0 %	—	31.12.2021
ex29153900	85	2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)	0 %	—	31.12.2023
ex29156019	10	Ethyl butyrate (CAS RN 105-54-4)	0 %	—	31.12.2022
ex29157040	10	Methyl palmitate (CAS RN 112-39-0)	0 %	—	31.12.2023
ex29159030	10	Methyl laurate (CAS RN 111-82-0)	0 %	—	31.12.2020
ex29159070	20	Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)	0 %	—	31.12.2022
ex29159070	25	Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)	0 %	—	31.12.2023
ex29159070	30	3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)	0 %	—	31.12.2022
ex29159070	35	2,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9)	0 %	—	31.12.2023
ex29159070	45	Trimethyl orthoformate (CAS RN 149-73-5)	0 %	—	31.12.2019
ex29159070	50	Allyl heptanoate (CAS RN 142-19-8)	0 %	—	31.12.2019
ex29159070	55	Triethyl orthoformate (CAS RN 122-51-0)	0 %	—	31.12.2023
ex29159070	60	Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)	0 %	—	31.12.2020
ex29159070	65	2-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3)	0 %	—	31.12.2020
ex29159070	80	Ethyl difluoroacetate (CAS RN 454-31-9)	0 %	—	31.12.2021
ex29161200	10	2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)	0 %	—	31.12.2023
ex29161200	40	2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)	0 %	—	31.12.2023
ex29161200	70	2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)	0 %	—	31.12.2022
ex29161300	20	Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9)	0 %	—	31.12.2023
ex29161300	30	Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities	0 %	—	31.12.2020
ex29161400	10	2,3-Epoxypropyl methacrylate (CAS RN 106-91-2)	0 %	—	31.12.2023
ex29161400	20	Ethyl methacrylate (CAS RN 97-63-2)	0 %	—	31.12.2023
ex29161995	20	Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)	0 %	—	31.12.2023
ex29161995	40	Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds	0 %	—	31.12.2023
ex29161995	50	Methyl 2-fluoroacrylate (CAS RN 2343-89-7)	0 %	—	31.12.2019
ex29162000	15	Transfluthrin (ISO) (CAS RN 118712-89-3)	0 %	—	31.12.2021
ex29162000	20	Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RN's 80657-64-3 and 80623-07-0)	0 %	—	31.12.2022
ex29162000	50	Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)	0 %	—	31.12.2023
ex29162000	60	3-Cyclohexylpropionic acid (CAS RN 701-97-3)	0 %	—	31.12.2020
ex29162000	70	Cyclopropanecarbonyl chloride (CAS RN 4023-34-1)	0 %	—	31.12.2023
ex29163100	10	Benzyl benzoate (CAS RN 120-51-4)	0 %	—	31.12.2021
ex29163990	13	3,5-Dinitrobenzoic acid (CAS RN 99-34-3)	0 %	—	31.12.2019
ex29163990	15	2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)	0 %	—	31.12.2021
ex29163990	18	2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9)	0 %	—	31.12.2019
ex29163990	20	3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)	0 %	—	31.12.2023
ex29163990	23	(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)	0 %	—	31.12.2019
ex29163990	25	2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)	0 %	—	31.12.2021
ex29163990	30	2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)	0 %	—	31.12.2020
ex29163990	33	Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)	0 %	—	31.12.2021
ex29163990	35	Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)	0 %	—	31.12.2023
ex29163990	41	4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)	0 %	—	31.12.2020
ex29163990	48	3-Fluorobenzoyl chloride (CAS RN 1711-07-5)	0 %	—	31.12.2023
ex29163990	50	3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)	0 %	—	31.12.2023
ex29163990	51	3-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7)	0 %	—	31.12.2020
ex29163990	53	5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)	0 %	—	31.12.2020
ex29163990	55	4-tert-Butylbenzoic acid (CAS RN 98-73-7)	0 %	—	31.12.2022
ex29163990	61	2-Phenylbutyric Acid (CAS RN 90-27-7)	0 %	—	31.12.2020
ex29163990	70	Ibuprofen (INN) (CAS RN 15687-27-1)	0 %	—	31.12.2023
ex29163990	73	(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)	0 %	—	31.12.2021
ex29163990	75	m-Toluic acid (CAS RN 99-04-7)	0 %	—	31.12.2022
ex29163990	85	(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)	0 %	—	31.12.2022
ex29171100	20	Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)	0 %	—	31.12.2023
ex29171100	30	Cobalt oxalate (CAS RN 814-89-1)	0 %	—	31.12.2019
ex29171200	20	Bis(3,4-epoxycyclohexylmethyl) adipate (CAS RN 3130-19-6)	0 %	—	31.12.2023
ex29171910	10	Dimethyl malonate (CAS RN 108-59-8)	0 %	—	31.12.2019
ex29171910	20	Diethyl malonate (CAS RN 105-53-3)	0 %	—	31.12.2022
ex29171980	15	Dimethyl but-2-ynedioate (CAS RN 762-42-5)	0 %	—	31.12.2023
ex29171980	30	Ethylene brassylate (CAS RN 105-95-3)	0 %	—	31.12.2019
ex29171980	35	Diethyl methylmalonate (CAS RN 609-08-5)	0 %	—	31.12.2023
ex29171980	50	Tetradecanedioic acid (CAS RN 821-38-5)	0 %	—	31.12.2020
ex29171980	70	Itaconic acid (CAS RN 97-65-4)	0 %	—	31.12.2023
ex29172000	30	1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)	0 %	—	31.12.2023
ex29172000	40	3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)	0 %	—	31.12.2023
ex29173400	10	Diallyl phthalate (CAS RN 131-17-9)	0 %	—	31.12.2023
ex29173995	20	Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)	0 %	—	31.12.2020
ex29173995	25	Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)	0 %	—	31.12.2020
ex29173995	30	Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)	0 %	—	31.12.2020
ex29173995	35	1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)	0 %	—	31.12.2020
ex29173995	40	Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)	0 %	—	31.12.2023
ex29173995	50	1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)	0 %	—	31.12.2019
ex29173995	60	Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8)	0 %	—	31.12.2019
ex29181600	20	Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5)	0 %	—	31.12.2019
ex29181930	10	Cholic acid (CAS RN 81-25-4)	0 %	—	31.12.2019
ex29181930	20	3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)	0 %	—	31.12.2019
ex29181998	20	L-Malic acid (CAS RN 97-67-6)	0 %	—	31.12.2023
ex29182900	10	Monohydroxynaphthoic acids	0 %	—	31.12.2023
ex29182900	35	Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)	0 %	—	31.12.2022
ex29182900	50	Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)	0 %	—	31.12.2023
ex29182900	60	Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)	0 %	—	31.12.2021
ex29182900	70	3,5-Diiodosalicylic acid (CAS RN 133-91-5)	0 %	—	31.12.2019
ex29183000	15	2-fluoro-5-formylbenzoic acid (CAS RN 550363-85-4)	0 %	—	31.12.2022
ex29183000	30	Methyl-2-benzoylbenzoate (CAS RN 606-28-0)	0 %	—	31.12.2023
ex29183000	50	Ethyl acetoacetate (CAS RN 141-97-9)	0 %	—	31.12.2022
ex29183000	60	4-Oxovaleric acid (CAS RN 123-76-2)	0 %	—	31.12.2019
ex29183000	70	2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)	0 %	—	31.12.2019
ex29183000	80	Methyl benzoylformate (CAS RN 15206-55-0)	0 %	—	31.12.2021
ex29189990	10	3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)	0 %	—	31.12.2023
ex29189990	13	3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)	0 %	—	31.12.2020
ex29189990	15	Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)	0 %	—	31.12.2022
ex29189990	18	Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)	0 %	—	31.12.2020
ex29189990	20	Methyl 3-methoxyacrylate (CAS RN 5788-17-0)	0 %	—	31.12.2019
ex29189990	23	1,8-Dihydroxyanthraquinone-3-carboxylic acid (CAS RN 478-43-3)	0 %	—	31.12.2021
ex29189990	25	Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)	0 %	—	31.12.2023
ex29189990	27	Ethyl 3-ethoxypropionate (CAS RN 763-69-9)	0 %	—	31.12.2022
ex29189990	30	Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)	0 %	—	31.12.2023
ex29189990	35	p-Anisic acid (CAS RN 100-09-4)	0 %	—	31.12.2019
ex29189990	38	Diclofop-methyl (ISO) (CAS RN 51338-27-3)	0 %	—	31.12.2022
ex29189990	40	trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)	0 %	—	31.12.2023
ex29189990	45	4-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)	0 %	—	31.12.2019
ex29189990	50	Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)	0 %	—	31.12.2023
ex29189990	55	Stearyl glycyrrhetinate(CAS RN 13832-70-7)	0 %	—	31.12.2019
ex29189990	60	3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)	0 %	—	31.12.2023
ex29189990	65	Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)	0 %	—	31.12.2019
ex29189990	70	Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)	0 %	—	31.12.2019
ex29189990	75	3,4-Dimethoxybenzoic acid (CAS RN 93-07-2)	0 %	—	31.12.2019
ex29189990	80	Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9)	0 %	—	31.12.2021
ex29189990	85	Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more	0 %	—	31.12.2020
ex29199000	10	2,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2)	0 %	—	31.12.2023
ex29199000	15	Benzene-1,3-diyl tetraphenyl bis(phosphate) (CAS RN 57583-54-7)	0 %	—	31.12.2023
ex29199000	30	Aluminium hydroxybis[2,2′-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)	0 %	—	31.12.2023
ex29199000	40	Tri-n-hexylphosphate (CAS RN 2528-39-4)	0 %	—	31.12.2023
ex29199000	50	Triethyl phosphate (CAS RN 78-40-0)	0 %	—	31.12.2021
ex29199000	60	Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)	0 %	—	31.12.2023
ex29199000	70	Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)	0 %	—	31.12.2019
ex29201900	10	Fenitrothion (ISO) (CAS RN 122-14-5)	0 %	—	31.12.2023
ex29201900	20	Tolclofos-methyl (ISO) (CAS RN 57018-04-9)	0 %	—	31.12.2023
ex29201900	30	2,2′-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2′-disulphide (CAS RN 4090-51-1)	0 %	—	31.12.2019
29202300		Trimethyl phosphite (CAS RN 121-45-9)	0 %	—	31.12.2023
29202400		Triethyl phosphite (CAS RN 122-52-1)	0 %	—	31.12.2021
ex29202900	10	O,O′-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)	0 %	—	31.12.2023
ex29202900	15	Phosphorous acid 3,3′,5,5′-tetrakis(1,1-dimethylethyl)-6,6′-dimethyl[1,1′-biphenyl]-2,2′-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5)	0 %	—	31.12.2022
ex29202900	20	Tris(methylphenyl)phosphite (CAS RN 25586-42-9)	0 %	—	31.12.2020
ex29202900	30	2,2′-[[3,3′,5,5′-Tetrakis(1,1-dimethylethyl)[1,1′-biphenyl]-2,2′-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2)	0 %	—	31.12.2020
ex29202900	40	Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)	0 %	—	31.12.2020
ex29202900	50	Fosetyl-aluminium (CAS RN 39148-24-8)	0 %	—	31.12.2023
ex29202900	60	Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides	0 %	—	31.12.2021
ex29209010	10	Diethyl sulphate (CAS RN 64-67-5)	0 %	—	31.12.2023
ex29209010	15	Ethyl methyl carbonate (CAS RN 623-53-0)	0 %	—	31.12.2023
ex29209010	20	Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3)	0 %	—	31.12.2023
ex29209010	25	Diethyl carbonate (CAS RN 105-58-8)	0 %	—	31.12.2023
ex29209010	35	Vinylene carbonate (CAS RN 872-36-6)	0 %	—	31.12.2023
ex29209010	40	Dimethyl carbonate (CAS RN 616-38-6)	0 %	—	31.12.2023
ex29209010	50	Di-tert-butyl dicarbonate (CAS RN 24424-99-5)	0 %	—	31.12.2023
ex29209010	60	2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)	0 %	—	31.12.2022
ex29209010	80	Sodium 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl sulphate (CAS RN 25446-78-0) in the form of a liquid paste with a content by weight in water of 62 % or more but not more than 65 %	0 %	—	31.12.2021
ex29209070	30	2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS RN 61676-62-8)	0 %	—	31.12.2023
ex29209070	60	Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)	0 %	—	31.12.2023
ex29209070	80	Bis(pinacolato)diboron (CAS RN 73183-34-3)	0 %	—	31.12.2020
29211300		2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)	0 %	—	31.12.2022
ex29211950ex29299000	1020	Diethylamino-triethoxysilane (CAS RN 35077-00-0)	0 %	—	31.12.2019
ex29211999	20	Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)	0 %	—	31.12.2023
ex29211999	25	Dimethyl(tetradecyl)amine (CAS RN 112-75-4), containing by weight not more than 3 % of other dimethyl(alkyl) amines	0 %	—	31.12.2023
ex29211999	30	Allylamine (CAS RN 107-11-9)	0 %	—	31.12.2023
ex29211999	45	2-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)	0 %	—	31.12.2021
ex29211999	70	N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)	0 %	—	31.12.2022
ex29211999	80	Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)	0 %	—	31.12.2019
ex29212900	20	Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)	0 %	—	31.12.2023
ex29212900	30	Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)	0 %	—	31.12.2023
ex29212900	40	Decamethylenediamine (CAS RN 646-25-3)	0 %	—	31.12.2020
ex29212900	50	N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4)	0 %	—	31.12.2021
ex29213010	10	2-(4-(cyclopropanecarbonyl)phenyl)-2-methylpropanoic acid cyclohexylamine salt (CAS RN 1690344-90-1)	0 %	—	31.12.2023
ex29213099	30	1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)	0 %	—	31.12.2020
ex29213099	40	Cyclopropylamine (CAS RN 765-30-0)	0 %	—	31.12.2022
ex29214200	15	4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2)	0 %	—	31.12.2019
ex29214200	25	Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)	0 %	—	31.12.2023
ex29214200	33	2-Fluoroaniline (CAS RN 348-54-9)	0 %	—	31.12.2020
ex29214200	35	2-Nitroaniline (CAS RN 88-74-4)	0 %	—	31.12.2023
ex29214200	40	Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)	0 %	—	31.12.2019
ex29214200	45	2,4,5-Trichloroaniline (CAS RN 636-30-6)	0 %	—	31.12.2023
ex29214200	50	3-Aminobenzenesulfonic acid (CAS RN 121-47-1)	0 %	—	31.12.2023
ex29214200	70	2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)	0 %	—	31.12.2019
ex29214200	80	4-Chloro-2-nitroaniline (CAS RN 89-63-4)	0 %	—	31.12.2023
ex29214200	85	3,5-Dichloroaniline (CAS RN 626-43-7)	0 %	—	31.12.2023
ex29214200	86	2,5-Dichloroaniline (CAS RN 95-82-9)	0 %	—	31.12.2022
ex29214200	87	N-Methylaniline (CAS RN 100-61-8)	0 %	—	31.12.2022
ex29214200	88	3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)	0 %	—	31.12.2022
ex29214300	20	4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)	0 %	—	31.12.2023
ex29214300	30	3-Nitro-p-toluidine (CAS RN 119-32-4)	0 %	—	31.12.2023
ex29214300	40	4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)	0 %	—	31.12.2019
ex29214300	50	4-Aminobenzotrifluoride (CAS RN 455-14-1)	0 %	—	31.12.2020
ex29214300	60	3-Aminobenzotrifluoride (CAS RN 98-16-8)	0 %	—	31.12.2020
ex29214400	20	Diphenylamine (CAS RN 122-39-4)	0 %	—	31.12.2023
ex29214500	20	2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)	0 %	—	31.12.2019
ex29214500	50	7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)	0 %	—	31.12.2019
ex29214500	60	1-Naphthylamine (CAS RN 134-32-7)	0 %	—	31.12.2022
ex29214500	70	8-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8)	0 %	—	31.12.2022
ex29214900	20	Pendimethalin (ISO) (CAS RN 40487-42-1)	3.5 %	—	31.12.2023
ex29214900	40	N-1-Naphthylaniline (CAS RN 90-30-2)	0 %	—	31.12.2023
ex29214900	60	2,6-Diisopropylaniline (CAS RN 24544-04-5)	0 %	—	31.12.2020
ex29214900	80	4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)	0 %	—	31.12.2020
ex29215119	30	2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)	0 %	—	31.12.2023
ex29215119	40	p-Phenylenediamine (CAS RN 106-50-3)	0 %	—	31.12.2021
ex29215119	50	Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene	0 %	—	31.12.2019
ex29215119	60	2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)	0 %	—	31.12.2019
ex29215119	70	4-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7)	0 %	—	31.12.2020
ex29215990	10	Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8)	0 %	—	31.12.2023
ex29215990	30	3,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)	0 %	—	31.12.2022
ex29215990	40	4,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8)	0 %	—	31.12.2023
ex29215990	60	(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)	0 %	—	31.12.2022
ex29215990	70	Tris(4-aminophenyl)methane (CAS RN 548-61-8)	0 %	—	31.12.2020
ex29221900	20	2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)	0 %	—	31.12.2022
ex29221900	30	N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3)	0 %	—	31.12.2023
ex29221900	35	2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)	0 %	—	31.12.2020
ex29221900	40	(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)	0 %	—	31.12.2021
ex29221900	45	2-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2)	0 %	—	31.12.2023
ex29221900	50	2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)	0 %	—	31.12.2019
ex29221900	60	N,N,N′-trimethyl-N′-(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0)	0 %	—	31.12.2023
ex29221900	65	trans-4-Aminocyclohexanol (CAS RN 27489-62-9)	0 %	—	31.12.2023
ex29221900	75	2-Ethoxyethylamine (CAS RN 110-76-9)	0 %	—	31.12.2023
ex29221900	80	N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)	0 %	—	31.12.2019
ex29221900	85	(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)	0 %	—	31.12.2023
ex29222100	10	2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)	0 %	—	31.12.2019
ex29222100	30	6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)	0 %	—	31.12.2019
ex29222100	40	7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)	0 %	—	31.12.2023
ex29222100	50	Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)	0 %	—	31.12.2019
ex29222100	60	4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)	0 %	—	31.12.2023
ex29222900	20	3-Aminophenol (CAS RN 591-27-5)	0 %	—	31.12.2023
ex29222900	25	5-Amino-o-cresol (CAS RN 2835-95-2)	0 %	—	31.12.2023
ex29222900	30	1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)	0 %	—	31.12.2020
ex29222900	40	4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7)	0 %	—	31.12.2020
ex29222900	45	Anisidines	0 %	—	31.12.2023
ex29222900	63	Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more	0 %	—	31.12.2020
ex29222900	65	4-Trifluoromethoxyaniline (CAS RN 461-82-5)	0 %	—	31.12.2019
ex29222900	67	4-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1)	0 %	—	31.12.2023
ex29222900	70	4-Nitro-o-anisidine (CAS RN 97-52-9)	0 %	—	31.12.2023
ex29222900	73	Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)	0 %	—	31.12.2021
ex29222900	75	4-(2-Aminoethyl)phenol (CAS RN 51-67-2)	0 %	—	31.12.2020
ex29222900	80	3-Diethylaminophenol (CAS RN 91-68-9)	0 %	—	31.12.2023
ex29222900	85	4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)	0 %	—	31.12.2023
ex29223900	10	1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts	0 %	—	31.12.2023
ex29223900	15	2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9)	0 %	—	31.12.2022
ex29223900	20	2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)	0 %	—	31.12.2020
ex29223900	25	3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5)	0 %	—	31.12.2020
ex29223900	35	5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)	0 %	—	31.12.2020
ex29224300	10	Anthranilic acid (CAS RN 118-92-3)	0 %	—	31.12.2023
ex29224985	10	Ornithine aspartate (INNM) (CAS RN 3230-94-2)	0 %	—	31.12.2023
ex29224985	20	3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)	0 %	—	31.12.2022
ex29224985	25	Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)	0 %	—	31.12.2019
ex29224985	30	Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)	0 %	—	31.12.2020
ex29224985	35	2-(3-Amino-4-chloro-benzoyl) benzoic acid (CAS RN 118-04-7)	0 %	—	31.12.2021
ex29224985	40	Norvaline	0 %	—	31.12.2023
ex29224985	45	Glycine (CAS RN 56-40-6)	0 %	—	31.12.2020
ex29224985	50	D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)	0 %	—	31.12.2019
ex29224985	55	(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7)	0 %	—	31.12.2019
ex29224985	60	Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)	0 %	—	31.12.2022
ex29224985	65	Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)	0 %	—	31.12.2020
ex29224985	70	2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)	0 %	—	31.12.2023
ex29224985	75	L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)	0 %	—	31.12.2022
ex29224985	80	12-Aminododecanoic acid (CAS RN 693-57-2)	0 %	—	31.12.2023
ex29225000	10	2-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)	0 %	—	31.12.2021
ex29225000	15	3,5-Diiodothyronine (CAS RN 1041-01-6)	0 %	—	31.12.2022
ex29225000	20	1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)	0 %	—	31.12.2019
ex29225000	35	(2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic acid hydrochloride (CAS RN 5486-79-3)	0 %	—	31.12.2023
ex29225000	70	2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate	0 %	—	31.12.2023
ex29231000	10	Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)	0 %	—	31.12.2019
ex29239000	10	Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide	0 %	—	31.12.2023
ex29239000	20	Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7)	0 %	—	31.12.2019
ex29239000	25	Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3)	0 %	—	31.12.2023
ex29239000	55	Tetrabutylammonium bromide (CAS RN 1643-19-2)	0 %	—	31.12.2021
ex29239000	70	Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:40 % (± 2 %) by weight of tetrapropylammonium hydroxide,0,3 % by weight or less of carbonate,0,1 % by weight or less of tripropylamine,500 mg/kg or less of bromide, and25 mg/kg or less of potassium and sodium taken together	0 %	—	31.12.2023
ex29239000	75	Tetraethylammonium hydroxide, in the form of an aqueous solution containing:35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,not more than 1000 mg/kg of chloride,not more than 2 mg/kg of iron, andnot more than 10 mg/kg of potassium	0 %	—	31.12.2020
ex29239000	80	Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride	0 %	—	31.12.2023
ex29239000	85	N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)	0 %	—	31.12.2019
ex29241900	10	2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)	0 %	—	31.12.2023
ex29241900	15	N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)	0 %	—	31.12.2019
ex29241900	20	(R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid (CAS RN 181289-33-8)	0 %	—	31.12.2020
ex29241900	25	Isobutylidenediurea (CAS RN 6104-30-9)	0 %	—	31.12.2022
ex29241900	30	Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)	0 %	—	31.12.2023
ex29241900	35	Acetamide (CAS RN 60-35-5)	0 %	—	31.12.2019
ex29241900	45	3-Chloro-N-methoxy-N-methylpropanamide (CAS RN 1062512-53-1)	0 %	—	31.12.2021
ex29241900	50	Acrylamide (CAS RN 79-06-1)	0 %	—	31.12.2023
ex29241900	55	2-Propynyl butylcarbamate (CAS RN 76114-73-3)	0 %	—	31.12.2021
ex29241900	60	N,N-Dimethylacrylamide (CAS RN 2680-03-7)	0 %	—	31.12.2021
ex29241900	65	2,2,2-trifluoroacetamide (CAS RN 354-38-1)	0 %	—	31.12.2023
ex29241900	70	Methylcarbamate (CAS RN 598-55-0)	0 %	—	31.12.2023
ex29241900	80	Tetrabutylurea (CAS RN 4559-86-8)	0 %	—	31.12.2022
ex29242100	10	4,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts	0 %	—	31.12.2023
ex29242100	20	(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)	0 %	—	31.12.2019
29242500		Alachlor (ISO), (CAS RN 15972-60-8)	0 %	—	31.12.2023
ex29242970	12	4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)	0 %	—	31.12.2019
ex29242970	15	Acetochlor (ISO), (CAS RN 34256-82-1)	0 %	—	31.12.2023
ex29242970	17	2-(Trifluoromethyl)benzamide (CAS RN 360-64-5)	0 %	—	31.12.2019
ex29242970	19	2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)	0 %	—	31.12.2019
ex29242970	20	2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)	0 %	—	31.12.2019
ex29242970	23	Benalaxyl-M (ISO) (CAS RN 98243-83-5)	0 %	—	31.12.2019
ex29242970	27	2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)	0 %	—	31.12.2021
ex29242970	30	Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)	0 %	—	31.12.2021
ex29242970	33	N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7)	0 %	—	31.12.2019
ex29242970	37	Beflubutamid (ISO) (CAS RN 113614-08-7)	0 %	—	31.12.2023
ex29242970	40	N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)	0 %	—	31.12.2020
ex29242970	45	Propoxur (ISO) (CAS RN 114-26-1)	0 %	—	31.12.2020
ex29242970	50	N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)	0 %	—	31.12.2021
ex29242970	53	4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)	0 %	—	31.12.2022
ex29242970	55	N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)	0 %	—	31.12.2020
ex29242970	60	N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1)	0 %	—	31.12.2020
ex29242970	61	(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288-8)	0 %	—	31.12.2020
ex29242970	62	2-Chlorobenzamide (CAS RN 609-66-5)	0 %	—	31.12.2020
ex29242970	63	N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)	0 %	—	31.12.2021
ex29242970	64	N-(3′,4′-dichloro-5-fluoro[1,1′-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)	0 %	—	31.12.2020
ex29242970	73	Napropamide (ISO) (CAS RN 15299-99-7)	0 %	—	31.12.2019
ex29242970	75	3-Amino-p-anisanilide (CAS RN 120-35-4)	0 %	—	31.12.2023
ex29242970	85	p-Aminobenzamide (CAS RN 2835-68-9)	0 %	—	31.12.2023
ex29242970	86	Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more	0 %	—	31.12.2022
ex29242970	88	5′-Chloro-3-hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-63-7)	0 %	—	31.12.2023
ex29242970	89	Flutolanil (ISO) (CAS RN 66332-96-5)	0 %	—	31.12.2023
ex29242970	91	3-Hydroxy-2′-methoxy-2-naphthanilide (CAS RN 135-62-6)	0 %	—	31.12.2023
ex29242970	92	3-Hydroxy-2-naphthanilide (CAS RN 92-77-3)	0 %	—	31.12.2019
ex29242970	93	3-Hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-61-5)	0 %	—	31.12.2023
ex29242970	94	2′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)	0 %	—	31.12.2023
ex29242970	97	1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)	0 %	—	31.12.2023
ex29251100	20	Saccharin and its sodium salt	0 %	—	31.12.2023
ex29251995	10	N-Phenylmaleimide (CAS RN 941-69-5)	0 %	—	31.12.2023
ex29251995	20	4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)	0 %	—	31.12.2022
ex29251995	30	N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)	0 %	—	31.12.2022
ex29252900	10	Dicyclohexylcarbodiimide (CAS RN 538-75-0)	0 %	—	31.12.2023
ex29252900	20	N-[3-(Dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)	0 %	—	31.12.2023
ex29252900	30	Guanidine sulphamate (CAS RN 50979-18-5)	0 %	—	31.12.2020
ex29269070	12	Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95 % or more	0 %	—	31.12.2019
ex29269070	13	alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9)	0 %	—	31.12.2019
ex29269070	14	Cyanoacetic acid (CAS RN 372-09-8)	0 %	—	31.12.2020
ex29269070	15	2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0)	0 %	—	31.12.2022
ex29269070	16	4-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)	0 %	—	31.12.2019
ex29269070	17	Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more	0 %	—	31.12.2020
ex29269070	18	Flumethrin (ISO) (CAS RN 69770-45-2)	0 %	—	31.12.2022
ex29269070	19	2-(4-amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2)	0 %	—	31.12.2023
ex29269070	20	2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)	0 %	—	31.12.2019
ex29269070	21	4-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9)	0 %	—	31.12.2023
ex29269070	22	Acetonitrile (CAS RN 75-05-8)	0 %	—	31.12.2023
ex29269070	23	Acrinathrin (ISO) (CAS RN 101007-06-1)	0 %	—	31.12.2023
ex29269070	25	2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)	0 %	—	31.12.2021
ex29269070	27	Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)	0 %	—	31.12.2023
ex29269070	30	4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)	0 %	—	31.12.2021
ex29269070	33	Deltamethrin (ISO) (CAS RN 52918-63-5)	0 %	—	31.12.2022
ex29269070	35	4-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)	0 %	—	31.12.2021
ex29269070	40	2-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6)	0 %	—	31.12.2021
ex29269070	50	Alkyl or alkoxyalkyl esters of cyanoacetic acid	0 %	—	31.12.2023
ex29269070	61	m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)	0 %	—	31.12.2021
ex29269070	64	Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers	0 %	—	31.12.2019
ex29269070	70	Methacrylonitrile (CAS RN 126-98-7)	0 %	—	31.12.2019
ex29269070	74	Chlorothalonil (ISO) (CAS RN 1897-45-6)	0 %	—	31.12.2019
ex29269070	75	Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)	0 %	—	31.12.2019
ex29269070	80	Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)	0 %	—	31.12.2023
ex29269070	86	Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)	0 %	—	31.12.2023
ex29269070	89	Butyronitrile (CAS RN 109-74-0)	0 %	—	31.12.2023
ex29270000	10	2,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride	0 %	—	31.12.2023
ex29270000	20	4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2)	0 %	—	31.12.2023
ex29270000	25	2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)	0 %	—	31.12.2022
ex29270000	30	4′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)	0 %	—	31.12.2023
ex29270000	35	C.C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam	0 %	—	31.12.2019
ex29270000	60	4,4′-Dicyano-4,4′-azodivaleric acid (CAS RN 2638-94-0)	0 %	—	31.12.2023
ex29270000	80	4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)	0 %	—	31.12.2022
ex29280090	10	3,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8)	0 %	—	31.12.2023
ex29280090	13	Cymoxanil (ISO) (CAS RN 57966-95-7)	0 %	—	31.12.2019
ex29280090	18	Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more	0 %	—	31.12.2019
ex29280090	23	Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more	0 %	—	31.12.2020
ex29280090	25	Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution	0 %	—	31.12.2020
ex29280090	28	Pentan-2-one oxime (CAS RN 623-40-5)	0 %	—	31.12.2021
ex29280090	30	N-Isopropylhydroxylamine (CAS RN 5080-22-8)	0 %	—	31.12.2021
ex29280090	33	4-Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7)	0 %	—	31.12.2023
ex29280090	40	O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2)	0 %	—	31.12.2023
ex29280090	45	Tebufenozide (ISO) (CAS RN 112410-23-8)	0 %	—	31.12.2023
ex29280090	50	Aqueous solution of 2,2′-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %	0 %	—	31.12.2020
ex29280090	55	Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)	0 %	—	31.12.2023
ex29280090	65	2-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride	0 %	—	31.12.2019
ex29280090	70	Butanone oxime (CAS RN 96-29-7)	0 %	—	31.12.2023
ex29280090	75	Metaflumizone (ISO) (CAS RN 139968-49-3)	0 %	—	31.12.2021
ex29280090	80	Cyflufenamid (ISO) (CAS RN 180409-60-3)	0 %	—	31.12.2023
ex29280090	85	Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)	0 %	—	31.12.2021
ex29291000	15	3,3′-Dimethylbiphenyl-4,4′-diyl diisocyanate (CAS RN 91-97-4)	0 %	—	31.12.2019
ex29291000	20	Butyl isocyanate (CAS RN 111-36-4)	0 %	—	31.12.2022
ex29291000	40	m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)	0 %	—	31.12.2023
ex29291000	50	m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)	0 %	—	31.12.2023
ex29291000	55	2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)	0 %	—	31.12.2022
ex29291000	60	Trimethylhexamethylene diisocyanate, mixed isomers	0 %	—	31.12.2023
ex29291000	80	1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)	0 %	—	31.12.2022
ex29302000	10	Prosulfocarb (ISO) (CAS RN 52888-80-9)	0 %	—	31.12.2022
ex29302000	20	2-Isopropylethylthiocarbamate (CAS RN 141-98-0)	0 %	—	31.12.2021
ex29309098	10	2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)	0 %	—	31.12.2020
ex29309098	12	4,4′-Sulfonyldiphenol (CAS RN 80-09-1) used in the manufacture of polyarylsulfones or polyarylethersulfones	0 %	—	31.12.2023
ex29309098	13	Mercaptamine hydrochloride (CAS RN 156-57-0)	0 %	—	31.12.2021
ex29309098	15	Ethoprophos (ISO) (CAS RN 13194-48-4)	0 %	—	31.12.2023
ex29309098	16	3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)	0 %	—	31.12.2019
ex29309098	17	2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)	0 %	—	31.12.2019
ex29309098	19	N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N′-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2)	0 %	—	31.12.2020
ex29309098	21	[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)	0 %	—	31.12.2021
ex29309098	22	Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more	0 %	—	31.12.2020
ex29309098	23	Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)	0 %	—	31.12.2023
ex29309098	25	Thiophanate-methyl (ISO), (CAS RN 23564-05-8)	0 %	—	31.12.2023
ex29309098	26	Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more	0 %	—	31.12.2020
ex29309098	27	2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)	0 %	—	31.12.2019
ex29309098	30	4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)	0 %	—	31.12.2023
ex29309098	33	2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)	0 %	—	31.12.2019
ex29309098	35	Glutathione (CAS RN 70-18-8)	0 %	—	31.12.2021
ex29309098	40	3,3′-Thiodi(propionic acid) (CAS RN 111-17-1)	0 %	—	31.12.2023
ex29309098	43	Trimethylsulfoxonium iodide (CAS RN 1774-47-6)	0 %	—	31.12.2023
ex29309098	45	2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)	0 %	—	31.12.2019
ex29309098	53	Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)	0 %	—	31.12.2020
ex29309098	55	Thiourea (CAS RN 62-56-6)	0 %	—	31.12.2020
ex29309098	57	Methyl (methylthio)acetate (CAS RN 16630-66-3)	0 %	—	31.12.2020
ex29309098	60	Methyl phenyl sulphide (CAS RN 100-68-5)	0 %	—	31.12.2023
ex29309098	64	3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)	0 %	—	31.12.2019
ex29309098	65	Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)	0 %	—	31.12.2022
ex29309098	68	Clethodim (ISO) (CAS RN 99129-21-2)	0 %	—	31.12.2022
ex29309098	77	4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)	0 %	—	31.12.2023
ex29309098	78	4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)	0 %	—	31.12.2021
ex29309098	80	Captan (ISO) (CAS RN 133-06-2)	0 %	—	31.12.2023
ex29309098	81	Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)	3 %	—	31.12.2019
ex29309098	85	2-Methyl-1-(methylthio)-2-propanamine (CAS RN 36567-04-1)	0 %	—	31.12.2021
ex29309098	89	Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates	0 %	—	31.12.2021
ex29309098	93	1-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8)	0 %	—	31.12.2021
ex29309098	95	N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6)	0 %	—	31.12.2021
ex29309098	97	Diphenyl sulphone (CAS RN 127-63-9)	0 %	—	31.12.2021
ex29313990	08	Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution	0 %	—	31.12.2022
ex29313990	13	Trioctylphosphine oxide (CAS RN 78-50-2)	0 %	—	31.12.2021
ex29313990	23	Di-tert-butylphosphane (CAS RN 819-19-2)	0 %	—	31.12.2023
ex29313990	25	(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)	0 %	—	31.12.2022
ex29313990	28	N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6)	0 %	—	31.12.2019
ex29313990	30	Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)	0 %	—	31.12.2023
ex29313990	35	Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7)	0 %	—	31.12.2023
ex29313990	40	Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)	0 %	—	31.12.2021
ex29313990	45	Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS RN 75980-60-8)	0 %	—	31.12.2023
ex29313990	48	Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)	0 %	—	31.12.2019
ex29313990	55	3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)	0 %	—	31.12.2023
ex29313990	57	Trimethyl phosphonoacetate (CAS RN 5927-18-4)	0 %	—	31.12.2020
ex29319000	03	Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane	0 %	—	31.12.2023
ex29319000	05	Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN	0 %	—	31.12.2020
ex29319000	10	(3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589-57-0)	0 %	—	31.12.2022
ex29319000	15	Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl	0 %	—	31.12.2019
ex29319000	18	Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5)	0 %	—	31.12.2019
ex29319000	20	Ferrocene (CAS RN 102-54-5)	0 %	—	31.12.2022
ex29319000	33	Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7)	0 %	—	31.12.2019
ex29319000	35	N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)	0 %	—	31.12.2019
ex29319000	50	Trimethylsilane (CAS RN 993-07-7)	0 %	—	31.12.2021
ex29319000	53	Trimethylborane (CAS RN 593-90-8)	0 %	—	31.12.2019
ex29319000	60	4-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1)	0 %	—	31.12.2020
ex29319000	63	Chloroethenyldimethylsilane (CAS RN 1719-58-0)	0 %	—	31.12.2020
ex29319000	65	Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)	0 %	—	31.12.2020
ex29319000	67	Dimethyltin dioleate (CAS RN 3865-34-7)	0 %	—	31.12.2020
ex29319000	70	(4-Propylphenyl)boronic acid (CAS RN 134150-01-9)	0 %	—	31.12.2020
ex29321300	10	Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)	0 %	—	31.12.2023
ex29321400	10	1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)	0 %	—	31.12.2019
ex29321900	20	Tetrahydrofuran-borane (CAS RN 14044-65-6)	0 %	—	31.12.2020
ex29321900	40	Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more	0 %	—	31.12.2019
ex29321900	41	2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)	0 %	—	31.12.2019
ex29321900	70	Furfurylamine (CAS RN 617-89-0)	0 %	—	31.12.2019
ex29321900	75	Tetrahydro-2-methylfuran (CAS RN 96-47-9)	0 %	—	31.12.2023
ex29321900	80	5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)	0 %	—	31.12.2021
ex29322090	10	2′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 70516-41-5)	0 %	—	31.12.2023
ex29322090	15	Coumarin (CAS RN 91-64-5)	0 %	—	31.12.2021
ex29322090	40	(S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)	0 %	—	31.12.2022
ex29322090	45	2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)	0 %	—	31.12.2023
ex29322090	50	L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5)	0 %	—	31.12.2022
ex29322090	55	6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)	0 %	—	31.12.2023
ex29322090	60	6′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 29512-49-0)	0 %	—	31.12.2021
ex29322090	65	Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)	0 %	—	31.12.2020
ex29322090	71	6′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 89331-94-2)	0 %	—	31.12.2021
ex29322090	80	Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)	0 %	—	31.12.2023
ex29322090	84	Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)	0 %	—	31.12.2023
ex29329900	10	Bendiocarb (ISO) (CAS RN 22781-23-3)	0 %	—	31.12.2023
ex29329900	13	(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)	0 %	—	31.12.2021
ex29329900	15	1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)	0 %	—	31.12.2021
ex29329900	18	4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)	0 %	—	31.12.2021
ex29329900	20	Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)	0 %	—	31.12.2021
ex29329900	23	2-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)	0 %	—	31.12.2022
ex29329900	25	1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)	0 %	—	31.12.2022
ex29329900	33	3-hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8)	0 %	—	31.12.2023
ex29329900	43	Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more	0 %	—	31.12.2019
ex29329900	45	2-Butylbenzofuran (CAS RN 4265-27-4)	0 %	—	31.12.2019
ex29329900	50	7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)	0 %	—	31.12.2020
ex29329900	53	1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)	0 %	—	31.12.2023
ex29329900	55	6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7)	0 %	—	31.12.2019
ex29329900	65	4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)	0 %	—	31.12.2020
ex29329900	70	1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)	0 %	—	31.12.2021
ex29329900	75	3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)	0 %	—	31.12.2021
ex29329900	80	1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)	0 %	—	31.12.2023
ex29329900	85	1,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)	0 %	—	31.12.2023
ex29331990	15	Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more	0 %	—	31.12.2019
ex29331990	25	3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)	0 %	—	31.12.2019
ex29331990	30	3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)	0 %	—	31.12.2023
ex29331990	35	1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS RN 191614-02-5)	0 %	—	31.12.2020
ex29331990	40	Edaravone (INN) (CAS RN 89-25-8)	0 %	—	31.12.2023
ex29331990	45	5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)	0 %	—	31.12.2021
ex29331990	50	Fenpyroximate (ISO) (CAS RN 134098-61-6)	0 %	—	31.12.2019
ex29331990	55	5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)	0 %	—	31.12.2021
ex29331990	60	Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)	0 %	—	31.12.2019
ex29331990	70	4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)	0 %	—	31.12.2023
ex29331990	80	3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)	0 %	—	31.12.2022
ex29332100	35	Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97 % or more	0 %	—	31.12.2020
ex29332100	50	1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)	0 %	—	31.12.2021
ex29332100	55	1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)	0 %	—	31.12.2020
ex29332100	60	DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)	0 %	—	31.12.2021
ex29332100	80	5,5-Dimethylhydantoin (CAS RN 77-71-4)	0 %	—	31.12.2020
ex29332990	15	Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)	0 %	—	31.12.2023
ex29332990	18	2-(2-chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl-1H-imidazole (CAS RN 7189-82-4)	0 %	—	31.12.2023
ex29332990	25	Prochloraz (ISO) (CAS RN 67747-09-5)	0 %	—	31.12.2023
ex29332990	40	Triflumizole (ISO) (CAS RN 68694-11-1)	0 %	—	31.12.2019
ex29332990	45	Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)	0 %	—	31.12.2023
ex29332990	50	1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)	0 %	—	31.12.2023
ex29332990	55	Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more	0 %	—	31.12.2019
ex29332990	60	1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)	0 %	—	31.12.2021
ex29332990	65	(S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8)	0 %	—	31.12.2020
ex29332990	70	Cyazofamid (ISO) (CAS RN 120116-88-3)	0 %	—	31.12.2021
ex29332990	75	2,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)	0 %	—	31.12.2021
ex29332990	80	Imazalil (ISO) (CAS RN 35554-44-0)	0 %	—	31.12.2022
29333950		Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)	0 %	—	31.12.2019
ex29333999	10	2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)	0 %	—	31.12.2021
ex29333999	11	2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)	0 %	—	31.12.2019
ex29333999	12	2,3-Dichloropyridine (CAS RN 2402-77-9)	0 %	—	31.12.2022
ex29333999	13	Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194-96-6)	0 %	—	31.12.2020
ex29333999	14	N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)	0 %	—	31.12.2020
ex29333999	16	Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6)	0 %	—	31.12.2020
ex29333999	17	3,5-Dimethylpyridine (CAS RN 591-22-0)	0 %	—	31.12.2020
ex29333999	19	Methyl nicotinate (INNM) (CAS RN 93-60-7)	0 %	—	31.12.2020
ex29333999	20	Copper pyrithione powder (CAS RN 14915-37-8)	0 %	—	31.12.2020
ex29333999	21	Boscalid (ISO) (CAS RN 188425-85-6)	0 %	—	31.12.2019
ex29333999	22	Isonicotinic acid (CAS RN 55-22-1)	0 %	—	31.12.2019
ex29333999	23	2-Chloro-3-cyanopyridine (CAS RN 6602-54-6)	0 %	—	31.12.2020
ex29333999	24	2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)	0 %	—	31.12.2019
ex29333999	25	Imazethapyr (ISO) (CAS RN 81335-77-5)	0 %	—	31.12.2023
ex29333999	26	2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)	0 %	—	31.12.2020
ex29333999	27	Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)	0 %	—	31.12.2021
ex29333999	28	Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)	0 %	—	31.12.2019
ex29333999	29	3,5-Dichloro-2-cyanopyridine (CAS RN 85331-33-5)	0 %	—	31.12.2021
ex29333999	31	2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)	0 %	—	31.12.2019
ex29333999	32	2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)	0 %	—	31.12.2021
ex29333999	33	5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)	0 %	—	31.12.2021
ex29333999	34	3-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile (CAS RN 157764-10-8)	0 %	—	31.12.2019
ex29333999	35	Aminopyralid (ISO) (CAS RN 150114-71-9)	0 %	—	31.12.2023
ex29333999	36	1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)	0 %	—	31.12.2022
ex29333999	37	Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)	0 %	—	31.12.2021
ex29333999	38	(2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6)	0 %	—	31.12.2022
ex29333999	39	2,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4)	0 %	—	31.12.2022
ex29333999	41	2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)	0 %	—	31.12.2021
ex29333999	45	5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole (CAS RN 102625-64-9)	0 %	—	31.12.2019
ex29333999	46	Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more	0 %	—	31.12.2021
ex29333999	47	(-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)	0 %	—	31.12.2021
ex29333999	48	Flonicamid (ISO) (CAS RN 158062-67-0)	0 %	—	31.12.2019
ex29333999	51	2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8)	0 %	—	31.12.2022
ex29333999	52	6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)	0 %	—	31.12.2023
ex29333999	53	3-Bromopyridine (CAS RN 626-55-1)	0 %	—	31.12.2019
ex29333999	54	4-methyl-2-pyridylamine (CAS RN 695-34-1)	0 %	—	31.12.2023
ex29333999	55	Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more	0 %	—	31.12.2019
ex29333999	57	Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)	0 %	—	31.12.2022
ex29333999	60	2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)	0 %	—	31.12.2023
ex29333999	65	Acetamiprid (ISO) (CAS RN 135410-20-7)	0 %	—	31.12.2023
ex29333999	67	(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)	0 %	—	31.12.2023
ex29333999	70	2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)	0 %	—	31.12.2021
ex29333999	72	5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4)	0 %	—	31.12.2021
ex29333999	77	Imazamox (ISO) (CAS RN 114311-32-9)	0 %	—	31.12.2023
ex29333999	85	2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)	0 %	—	31.12.2020
ex29334910	10	Quinmerac (ISO) (CAS RN 90717-03-6)	0 %	—	31.12.2023
ex29334910	20	3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)	0 %	—	31.12.2023
ex29334910	30	Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)	0 %	—	31.12.2022
ex29334910	40	4,7-Dichloroquinoline (CAS RN 86-98-6)	0 %	—	31.12.2019
ex29334910	50	1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)	0 %	—	31.12.2020
ex29334910ex29334990	6065	Roxadustat (INN) (CAS RN 808118-40-3)	0 %	—	31.12.2023
ex29334990	25	Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)	0 %	—	31.12.2021
ex29334990	30	Quinoline (CAS RN 91-22-5)	0 %	—	31.12.2020
ex29334990	35	[1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3)	0 %	—	31.12.2020
ex29334990	40	Isoquinoline (CAS RN 119-65-3)	0 %	—	31.12.2020
ex29334990	45	6,7-Dimethoxy-3,4- dihydroisoquinoline hydrochloride (CAS RN 20232-39-7)	0 %	—	31.12.2023
ex29334990	70	Quinolin-8-ol (CAS RN 148-24-3)	0 %	—	31.12.2023
ex29335200	10	Malonylurea (barbituric acid) (CAS RN 67-52-7)	0 %	—	31.12.2021
ex29335995	10	6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)	0 %	—	31.12.2019
ex29335995	13	2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)	0 %	—	31.12.2023
ex29335995	15	Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)	0 %	—	31.12.2023
ex29335995	17	N,N′-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6)	0 %	—	31.12.2019
ex29335995	18	1-Methyl-3-phenylpiperazine (CAS RN 5271-27-2)	0 %	—	31.12.2020
ex29335995	20	2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)	0 %	—	31.12.2023
ex29335995	21	N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)	0 %	—	31.12.2020
ex29335995	22	6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6)	0 %	—	31.12.2022
ex29335995	23	6-Chloro-3-methyluracil (CAS RN 4318-56-3)	0 %	—	31.12.2019
ex29335995	24	1-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8)	0 %	—	31.12.2022
ex29335995	26	5-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524-64-7)	0 %	—	31.12.2022
ex29335995	27	2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)	0 %	—	31.12.2023
ex29335995	30	Mepanipyrim (ISO) (CAS RN 110235-47-7)	0 %	—	31.12.2023
ex29335995	33	4,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)	0 %	—	31.12.2019
ex29335995	37	6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)	0 %	—	31.12.2019
ex29335995	43	2-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic acid (CAS RN 7365-45-9)	0 %	—	31.12.2019
ex29335995	45	1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)	0 %	—	31.12.2019
ex29335995	47	6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more	0 %	—	31.12.2020
ex29335995	50	2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)	0 %	—	31.12.2019
ex29335995	53	5-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2)	0 %	—	31.12.2020
ex29335995	57	5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS RN 13223-43-3)	0 %	—	31.12.2020
ex29335995	60	2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)	0 %	—	31.12.2023
ex29335995	65	1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)	0 %	—	31.12.2019
ex29335995	70	N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)	0 %	—	31.12.2023
ex29335995	75	(2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8)	0 %	—	31.12.2019
ex29335995	77	3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)	0 %	—	31.12.2022
ex29335995	87	5-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)	0 %	—	31.12.2021
ex29335995	89	6-Benzyladenine (CAS RN 1214-39-7)	0 %	—	31.12.2021
ex29336980	13	Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more	0 %	—	31.12.2020
ex29336980	15	2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)	0 %	—	31.12.2020
ex29336980	17	Benzoguanamine (CAS RN 91-76-9)	0 %	—	31.12.2020
ex29336980	40	Troclosene sodium (INNM) (CAS RN 2893-78-9)	0 %	—	31.12.2021
ex29336980	45	2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6)	0 %	—	31.12.2023
ex29336980	55	Terbutryn (ISO) (CAS RN 886-50-0)	0 %	—	31.12.2020
ex29336980	60	Cyanuric acid (CAS RN 108-80-5)	0 %	—	31.12.2020
ex29336980	65	1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)	0 %	—	31.12.2023
ex29336980	75	Metamitron (ISO) (CAS RN 41394-05-2)	0 %	—	31.12.2019
ex29336980	80	Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)	0 %	—	31.12.2023
ex29337900	15	Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)	0 %	—	31.12.2021
ex29337900	25	Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)	0 %	—	31.12.2022
ex29337900	30	5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)	0 %	—	31.12.2022
ex29337900	35	1-tert-butyl 2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate (CAS RN 108963-96-8)	0 %	—	31.12.2023
ex29337900	50	6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)	0 %	—	31.12.2023
ex29337900	60	3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9)	0 %	—	31.12.2019
ex29337900	70	(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)	0 %	—	31.12.2020
ex29339980	11	Fenbuconazole (ISO) (CAS RN 114369-43-6)	0 %	—	31.12.2019
ex29339980	12	Myclobutanil (ISO) (CAS RN 88671-89-0)	0 %	—	31.12.2019
ex29339980	13	5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)	0 %	—	31.12.2021
ex29339980	14	2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)	0 %	—	31.12.2023
ex29339980	15	2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)	0 %	—	31.12.2023
ex29339980	16	Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more	0 %	—	31.12.2020
ex29339980	17	Carfentrazone-ethyl (ISO) (CAS RN 128639-02-1) with a purity by weight of 93 % or more	0 %	—	31.12.2020
ex29339980	19	2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)	0 %	—	31.12.2019
ex29339980	20	2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)	0 %	—	31.12.2023
ex29339980	21	1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)	0 %	—	31.12.2020
ex29339980	23	Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more	0 %	—	31.12.2019
ex29339980	24	1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)	0 %	—	31.12.2022
ex29339980	26	(2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4-methylbenzenesulfonate (CUS 0143289-9)	0 %	—	31.12.2020
ex29339980	27	5,6-Dimethylbenzimidazole (CAS RN 582-60-5)	0 %	—	31.12.2019
ex29339980	29	3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7)	0 %	—	31.12.2020
ex29339980	30	Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)	0 %	—	31.12.2023
ex29339980	31	Triadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more	0 %	—	31.12.2020
ex29339980	33	Penconazole (ISO) (CAS RN 66246-88-6)	0 %	—	31.12.2019
ex29339980	34	2,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)	0 %	—	31.12.2021
ex29339980	36	3-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2)	0 %	—	31.12.2021
ex29339980	37	8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)	0 %	—	31.12.2019
ex29339980	38	(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)	0 %	—	31.12.2021
ex29339980	39	O-(benzotriazol-1-yl)-N,N,N′,N′-tetramethyluronium tetrafluoroborate (CAS RN 125700-67-6)	0 %	—	31.12.2021
ex29339980	40	trans-4-Hydroxy-L-proline (CAS RN 51-35-4)	0 %	—	31.12.2023
ex29339980	41	5-[4′-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)	0 %	—	31.12.2022
ex29339980	42	(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)	0 %	—	31.12.2021
ex29339980	44	(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)	0 %	—	31.12.2021
ex29339980	45	Maleic hydrazide (ISO) (CAS RN 123-33-1)	0 %	—	31.12.2023
ex29339980	46	(S)-indoline-2-carboxylic acid (CAS RN 79815-20-6)	0 %	—	31.12.2022
ex29339980	47	Paclobutrazol (ISO) (CAS RN 76738-62-0)	0 %	—	31.12.2022
ex29339980	48	5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)	0 %	—	31.12.2022
ex29339980	50	Metconazole (ISO) (CAS RN 125116-23-6)	3.2 %	—	31.12.2023
ex29339980	51	Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides	0 %	—	31.12.2021
ex29339980	52	N-Boc-trans-4-Hydroxy-L-proline methyl ester (CAS RN 74844-91-0)	0 %	—	31.12.2020
ex29339980	53	Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1)	0 %	—	31.12.2023
ex29339980	54	3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)	0 %	—	31.12.2020
ex29339980	55	Pyridaben (ISO) (CAS RN 96489-71-3)	0 %	—	31.12.2019
ex29339980	56	Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1)	0 %	—	31.12.2023
ex29339980	57	2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)	0 %	—	31.12.2023
ex29339980	67	Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)	0 %	—	31.12.2021
ex29339980	71	10-Methoxyiminostilbene (CAS RN 4698-11-7)	0 %	—	31.12.2023
ex29339980	72	1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)	0 %	—	31.12.2023
ex29339980	74	Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2)	0 %	—	31.12.2019
ex29339980	78	3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)	0 %	—	31.12.2023
ex29339980	81	1,2,3-Benzotriazole (CAS RN 95-14-7)	0 %	—	31.12.2021
ex29339980	82	Tolytriazole (CAS RN 29385-43-1)	0 %	—	31.12.2023
ex29339980	89	Carbendazim (ISO) (CAS RN 10605-21-7)	0 %	—	31.12.2023
ex29341000	10	Hexythiazox (ISO) (CAS RN 78587-05-0)	0 %	—	31.12.2023
ex29341000	15	4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)	0 %	—	31.12.2022
ex29341000	20	2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)	0 %	—	31.12.2023
ex29341000	25	(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)	0 %	—	31.12.2022
ex29341000	35	(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)	0 %	—	31.12.2022
ex29341000	45	2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)	0 %	—	31.12.2019
ex29341000	60	Fosthiazate (ISO) (CAS RN 98886-44-3)	0 %	—	31.12.2019
ex29341000	80	3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)	0 %	—	31.12.2021
ex29342080	15	Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)	0 %	—	31.12.2022
ex29342080	30	2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)	0 %	—	31.12.2021
ex29342080	40	1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)	0 %	—	31.12.2022
ex29342080	50	S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9)	0 %	—	31.12.2019
ex29342080	60	Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)	0 %	—	31.12.2020
ex29342080	70	N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)	0 %	—	31.12.2020
ex29343090	10	2-Methylthiophenothiazine (CAS RN 7643-08-5)	0 %	—	31.12.2022
ex29349990	10	Fluralaner (INN) (CAS RN 864731-61-3)	0 %	—	31.12.2019
ex29349990	12	Dimethomorph (ISO) (CAS RN 110488-70-5)	0 %	—	31.12.2023
ex29349990	15	Carboxin (ISO) (CAS RN 5234-68-4)	0 %	—	31.12.2023
ex29349990	16	Difenoconazole (ISO) (CAS RN 119446-68-3)	0 %	—	31.12.2019
ex29349990	19	2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3)	0 %	—	31.12.2019
ex29349990	20	Thiophene (CAS RN 110-02-1)	0 %	—	31.12.2019
ex29349990	23	Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)	0 %	—	31.12.2021
ex29349990	24	Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more	0 %	—	31.12.2019
ex29349990	25	2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)	0 %	—	31.12.2020
ex29349990	26	4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)	0 %	—	31.12.2019
ex29349990	27	2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)	0 %	—	31.12.2019
ex29349990	28	11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)	0 %	—	31.12.2021
ex29349990	30	Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)	0 %	—	31.12.2019
ex29349990	31	Uridine 5′-diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1)	0 %	—	31.12.2020
ex29349990	32	Uridine 5′-diphosphoglucuronic acid trisodium salt (CAS RN 63700-19-6)	0 %	—	31.12.2020
ex29349990	34	7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4)	0 %	—	31.12.2020
ex29349990	36	Oxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more	0 %	—	31.12.2020
ex29349990	37	4-Propan-2-ylmorpholine (CAS RN 1004-14-4)	0 %	—	31.12.2022
ex29349990	39	4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)	0 %	—	31.12.2020
ex29349990	41	11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)	0 %	—	31.12.2020
ex29349990	42	1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)	0 %	—	31.12.2019
ex29349990	44	Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more	0 %	—	31.12.2020
ex29349990	46	4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)	0 %	—	31.12.2021
ex29349990	47	Thidiazuron (ISO) (CAS RN 51707-55-2) with a content by weight of 98 % or more	0 %	—	31.12.2021
ex29349990	48	Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)	0 %	—	31.12.2021
ex29349990	49	Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)	0 %	—	31.12.2021
ex29349990	50	10-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1)	0 %	—	31.12.2020
ex29349990	52	Epoxiconazole (ISO) (CAS RN 133855-98-8)	0 %	—	31.12.2022
ex29349990	53	4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)	0 %	—	31.12.2021
ex29349990	54	2-benzyl-2-dimethylamino-4′-morpholinobutyrophenone (CAS RN 119313-12-1)	0 %	—	31.12.2022
ex29349990	56	1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)	0 %	—	31.12.2022
ex29349990	57	(6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1 -azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709-09-3)	0 %	—	31.12.2022
ex29349990	58	Dimethenamide-P (ISO) (CAS RN 163515-14-8)	0 %	—	31.12.2023
ex29349990	59	Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)	0 %	—	31.12.2022
ex29349990	60	DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)	0 %	—	31.12.2023
ex29349990	61	5-(1,2-dithiolan-3-yl)valeric acid (CAS RN 1077-28-7)	0 %	—	31.12.2023
ex29349990	62	(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 17-acetate (CAS RN 119302-24-8)	0 %	—	31.12.2023
ex29349990	63	(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4)	0 %	—	31.12.2023
ex29349990	64	2-Bromo-5-benzoylthiophene (CAS RN 31161-46-3)	0 %	—	31.12.2023
ex29349990	66	Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)	0 %	—	31.12.2023
ex29349990	74	2-Isopropylthioxanthone (CAS RN 5495-84-1)	0 %	—	31.12.2022
ex29349990	75	(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)	0 %	—	31.12.2021
ex29349990ex32042000	7610	2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)	0 %	—	31.12.2021
ex29349990	79	Thiophen-2-ethanol (CAS RN 5402-55-1)	0 %	—	31.12.2023
ex29349990	83	Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more	0 %	—	31.12.2019
ex29349990	84	Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more	0 %	—	31.12.2019
ex29349990	86	Dithianon (ISO) (CAS RN 3347-22-6)	0 %	—	31.12.2020
ex29349990	87	2,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)	0 %	—	31.12.2020
ex29359090	10	Florasulam (ISO) (CAS RN 145701-23-1)	0 %	—	31.12.2019
ex29359090	15	Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)	0 %	—	31.12.2023
ex29359090	20	Toluenesulphonamides	0 %	—	31.12.2023
ex29359090	23	N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)	0 %	—	31.12.2021
ex29359090	25	Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)	0 %	—	31.12.2023
ex29359090	27	Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)	0 %	—	31.12.2021
ex29359090	28	N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)	0 %	—	31.12.2023
ex29359090	30	6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)	0 %	—	31.12.2021
ex29359090	35	Chlorsulfuron (ISO) (CAS RN 64902-72-3)	0 %	—	31.12.2023
ex29359090	40	Venetoclax (INN) (CAS 1257044-40-8)	0 %	—	31.12.2022
ex29359090	42	Penoxsulam (ISO) (CAS RN 219714-96-2)	0 %	—	31.12.2020
ex29359090	43	Oryzalin (ISO) (CAS RN 19044-88-3)	0 %	—	31.12.2019
ex29359090	45	Rimsulfuron (ISO) (CAS RN 122931-48-0)	0 %	—	31.12.2023
ex29359090	47	Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more	0 %	—	31.12.2019
ex29359090	48	(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)	0 %	—	31.12.2021
ex29359090	50	4,4′-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)	0 %	—	31.12.2023
ex29359090	52	(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2)	0 %	—	31.12.2020
ex29359090	53	2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)	0 %	—	31.12.2019
ex29359090	54	Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more	0 %	—	31.12.2020
ex29359090	55	Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)	0 %	—	31.12.2023
ex29359090	56	N-(p-Toluenesulphonyl)-N′-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)	0 %	—	31.12.2020
ex29359090	57	N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)	0 %	—	31.12.2020
ex29359090	58	1-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8)	0 %	—	31.12.2020
ex29359090	59	Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more	0 %	—	31.12.2020
ex29359090	63	Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more	0 %	—	31.12.2019
ex29359090	65	Tribenuron-methyl (ISO) (CAS RN 101200-48-0)	0 %	—	31.12.2023
ex29359090	67	N-(2-phenoxyphenyl)methanesulphonamide (CAS RN 51765-51-6)	0 %	—	31.12.2021
ex29359090	73	(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)	0 %	—	31.12.2022
ex29359090	75	Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)	0 %	—	31.12.2023
ex29359090	77	[[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)	0 %	—	31.12.2019
ex29359090	85	N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride	0 %	—	31.12.2019
ex29359090	88	N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)	0 %	—	31.12.2023
ex29359090	89	3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)	0 %	—	31.12.2021
ex29389030	10	Ammonium glycyrrhizate (CAS RN 53956-04-0)	0 %	—	31.12.2020
ex29389090	10	Hesperidin (CAS RN 520-26-3)	0 %	—	31.12.2023
ex29389090	20	Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)	0 %	—	31.12.2023
ex29389090	30	Rebaudioside A (CAS RN 58543-16-1)	0 %	—	31.12.2022
ex29389090	40	Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages	0 %	—	31.12.2022
ex29400000	30	D(+)- Trehalose dihydrate (CAS RN 6138-23-4)	0 %	—	31.12.2021
ex29412030	10	Dihydrostreptomycin sulphate (CAS RN 5490-27-7)	0 %	—	31.12.2021
ex29420000	10	Sodium triacetoxyborohydride (CAS RN 56553-60-7)	0 %	—	31.12.2021
32012000		Wattle extract	0 %	—	31.12.2023
ex32019090	20	Tanning extracts derived from gambier and myrobalan fruits	0 %	—	31.12.2023
ex32019090ex32029000	4010	Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)	0 %	—	31.12.2020
ex32041100	15	Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight	0 %	—	31.12.2023
ex32041100	20	Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight	0 %	—	31.12.2020
ex32041100	25	N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)	0 %	—	31.12.2019
ex32041100	35	Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 of 50 % or more by weight	0 %	—	31.12.2022
ex32041100	40	Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight	0 %	—	31.12.2021
ex32041100	45	Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 or Disperse Orange 288,C.I. Disperse Blue 291:1,C.I. Disperse Violet 93:1,whether or not containing C.I. Disperse Red 54	0 %	—	31.12.2020
ex32041100	50	Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight	0 %	—	31.12.2021
ex32041100	60	Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight	0 %	—	31.12.2021
ex32041200	10	Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight	0 %	—	31.12.2021
ex32041200	15	Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	17	Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	25	Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight	0 %	—	31.12.2021
ex32041200	27	Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	35	Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	37	Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight	0 %	—	31.12.2021
ex32041200	40	Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)	0 %	—	31.12.2023
ex32041200	45	Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	47	Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	55	Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	57	Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	60	Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight	0 %	—	31.12.2019
ex32041200	65	Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041200	70	Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight	0 %	—	31.12.2020
ex32041300	10	Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight	0 %	—	31.12.2021
ex32041300	15	Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight	0 %	—	31.12.2022
ex32041300	25	Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight	0 %	—	31.12.2022
ex32041300	30	Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight	0 %	—	31.12.2023
ex32041300	35	Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 75 % or more by weight	0 %	—	31.12.2022
ex32041300	40	Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight	0 %	—	31.12.2022
ex32041300	45	Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 60 % or more by weight	0 %	—	31.12.2022
ex32041300	50	Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight	0 %	—	31.12.2019
ex32041300	60	Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight	0 %	—	31.12.2019
ex32041400	10	Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight	0 %	—	31.12.2019
ex32041400	20	Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight	0 %	—	31.12.2019
ex32041400	30	C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight	0 %	—	31.12.2019
ex32041400	40	Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) and preparations based thereon with a colourant C.I. Direct Black 168 content by weight of 75 % or more, in powder form for leather dyeing	0 %	—	31.12.2021
ex32041500	60	Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight	0 %	—	31.12.2023
ex32041500	70	Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)	0 %	—	31.12.2023
ex32041600	30	Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:Colourant Reactive Yellow 201 (CAS RN 27624-67-5),1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)	0 %	—	31.12.2019
ex32041600	40	Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0)with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, andcontaining a preservative	0 %	—	31.12.2022
ex32041700	10	Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight	0 %	—	31.12.2023
ex32041700	15	Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight	0 %	—	31.12.2021
ex32041700	16	Colourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Pigment Red 49:2 content of 60 % or more by weight	0 %	—	31.12.2020
ex32041700	17	Colourant C.I. Pigment Red 12 (CAS RN 6410-32-8) and preparations based thereon with a colourant C.I. Pigment Red 12 content of 35 % or more by weight	0 %	—	31.12.2019
ex32041700	18	Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight	0 %	—	31.12.2021
ex32041700	19	Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight	0 %	—	31.12.2023
ex32041700	20	Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight	0 %	—	31.12.2021
ex32041700	21	Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight	0 %	—	31.12.2019
ex32041700	22	Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight	0 %	—	31.12.2021
ex32041700	23	Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)	0 %	—	31.12.2019
ex32041700	24	Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight	0 %	—	31.12.2023
ex32041700	25	Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight	0 %	—	31.12.2021
ex32041700	26	Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight	0 %	—	31.12.2022
ex32041700	29	Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight	0 %	—	31.12.2022
ex32041700	33	Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight	0 %	—	31.12.2020
ex32041700	35	Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight	0 %	—	31.12.2021
ex32041700	37	Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight	0 %	—	31.12.2023
ex32041700	40	Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight	0 %	—	31.12.2019
ex32041700	45	Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight	0 %	—	31.12.2023
ex32041700	65	Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight	0 %	—	31.12.2021
ex32041700	75	Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight	0 %	—	31.12.2022
ex32041700	80	Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight	0 %	—	31.12.2022
ex32041700	85	Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight	0 %	—	31.12.2022
ex32041700	88	Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight	0 %	—	31.12.2022
ex32041900	12	Colourant C.I. Solvent Violet 49 (CAS RN 205057-15-4)	0 %	—	31.12.2019
ex32041900	13	Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight	0 %	—	31.12.2021
ex32041900	14	Red colourant preparation, in a form of wet paste, containing by weight:35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1)not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9)not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5)55 % or more but not more than 65 % of water	0 %	—	31.12.2019
ex32041900	16	Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight	0 %	—	31.12.2022
ex32041900	21	Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6)	0 %	—	31.12.2019
ex32041900	70	Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight	0 %	—	31.12.2019
ex32041900	71	Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight	0 %	—	31.12.2020
ex32041900	73	Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight	0 %	—	31.12.2020
ex32041900	77	Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight	0 %	—	31.12.2021
ex32041900	84	Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight	0 %	—	31.12.2022
ex32042000	30	Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight	0 %	—	31.12.2021
ex32049000	10	Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight	0 %	—	31.12.2019
ex32049000	20	Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % of a colourant C.I. Solvent Red 175	0 %	—	31.12.2022
ex32050000	10	Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry	0 %	—	31.12.2023
ex32061100	10	Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate	0 %	—	31.12.2023
ex32061900	10	Preparation containing by weight:72 % (± 2 %) of mica (CAS RN 12001-26-2), and28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)	0 %	—	31.12.2021
ex32064200	10	Lithopone (CAS RN 1345-05-7)	0 %	—	31.12.2023
ex32064970	20	Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)	0 %	—	31.12.2019
ex32064970	30	Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a C.I. Pigment Black 12 content of 50 % or more by weight	0 %	—	31.12.2022
ex32064970	40	Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight	0 %	—	31.12.2022
32065000		Inorganic products of a kind used as luminophores	0 %	—	31.12.2023
ex32073000	20	Printing paste containing30 % by weight or more, but not more than 50 % of silver, and8 % by weight or more, but not more than 17 % of palladium	0 %	—	31.12.2019
ex32074085	40	Glass flakes (CAS RN 65997-17-3):of a thickness of 0,3 μm or more but not more than 10 μm, andcoated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)	0 %	—	31.12.2022
ex32081010	10	Thermoplastic polyester copolymer resin with a solid content of 30 % or more but not more than 50 %, in organic solvents	0 %	—	31.12.2020
ex32082010	10	Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer	0 %	—	31.12.2023
ex32082010	20	Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether	0 %	—	31.12.2023
ex32089019	15	Chlorinated polyolefins, in a solution	0 %	—	31.12.2023
ex32089019	20	Preparation of 5 % or more but not more than 20 % by weight of propylene maleic anhydride copolymer or a blend of polypropylene and propylene maleic anhydride copolymer in an organic solvent	0 %	—	31.12.2020
ex32089019ex39046980	2589	Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight	0 %	—	31.12.2022
ex32089019	40	Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane	0 %	—	31.12.2023
ex32089019ex38249992	4563	Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate	0 %	—	31.12.2023
ex32089019	47	Solution containing by weight:0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)	0 %	—	31.12.2021
ex32089019	50	Solution containing by weight:(65 ± 10) % of γ-butyrolactone,(30 ± 10) % of polyamide resin,(3,5 ± 1,5) % of naphthoquinone ester derivative, and(1,5 ± 0,5) % of arylsilicic acid	0 %	—	31.12.2023
ex32089019	60	Copolymer of hydroxystyrene with one or more of the following:styrenealkoxystyrenealkylacrylatesdissolved in ethyl lactate	0 %	—	31.12.2021
ex32089019	65	Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants	0 %	—	31.12.2019
ex32089019	75	Acenaphthalene copolymer in ethyl lactate solution	0 %	—	31.12.2022
ex32151100ex32151900	1010	Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments	0 %	—	31.12.2023
ex32151900	20	Ink:consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),with a total solid content by weight of 55 % or more, but not more than 57 %, andwith a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,for use in the manufacture of electrodes	0 %	l	31.12.2022
ex32159070	10	Ink formulation, for use in the manufacture of ink-jet cartridges	0 %	—	31.12.2023
ex32159070	20	Heat sensitive ink fixed on a plastic film	0 %	—	31.12.2023
ex32159070	30	Disposable cartridge ink, containing by weight:1 % or more, but not more than 10 % of amorphous silicon dioxide, or3,8 % or more of dye C.I. Solvent Black 7 in organic solvents,for use in the marking of integrated circuits	0 %	—	31.12.2023
ex32159070	40	Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:wax,a vinyl-based polymer, anda colouring agent,for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices	0 %	—	31.12.2020
33011210		Essential oil of orange, not deterpenated	0 %	—	31.12.2023
ex34021190	10	Sodium lauroyl methyl isethionate	0 %	—	31.12.2020
ex34021300	10	Vinyl copolymer surface active agent based on polypropylene glycol	0 %	—	31.12.2023
ex34021300	20	Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated	0 %	—	31.12.2022
ex34029010	10	Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides	0 %	—	31.12.2019
ex34029010	20	Mixture of docusate sodium (INN) and sodium benzoate	0 %	—	31.12.2023
ex34029010	30	Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1)	0 %	—	31.12.2020
ex34029010	50	Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)	0 %	—	31.12.2020
ex34029010	60	Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane	0 %	—	31.12.2020
ex34029010	70	Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)	0 %	—	31.12.2019
ex35019090	10	Non edible sodium caseinate (CAS RN 9005-46-3) in the form of powder with a protein content of more than 88 % by weight for use in the production of thermoplastic granules	0 %	—	31.12.2023
ex35069110ex35069190	1010	Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)	0 %	—	31.12.2023
ex35069110ex35069190	3030	Two component microencapsulated epoxy adhesive dispersed in a solvent	0 %	—	31.12.2023
ex35069110ex35069190	4040	Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)	0 %	—	31.12.2019
ex35069110ex35069190	5050	Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,dissolved in:Methyl ethyl ketone (CAS RN 78-93-3),Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)	0 %	—	31.12.2020
ex35069190	60	Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 65 % or more but not more than 75 %	0 %	l	31.12.2022
ex35069190	70	Temporary wafer-bonding release in the form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight	0 %	l	31.12.2022
ex35079090	10	Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products	0 %	—	31.12.2019
ex35079090	20	Creatine amidinohydrolase (CAS RN 37340-58-2)	0 %	—	31.12.2020
ex35079090	30	Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution withan enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml,a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 %, anda pH value of 6,5 or more, but not more than 8,5	0 %	—	31.12.2021
ex36010000	10	Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators	0 %	—	31.12.2021
ex36030060	10	Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 25,25 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 6,9 mm (± 0,3 mm)	0 %	—	31.12.2022
ex37013000	20	Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm	0 %	—	31.12.2019
ex37013000	30	Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm	0 %	—	31.12.2023
ex37019900	10	Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 8542	0 %	—	31.12.2023
ex37071000	10	Photosensitive emulsion for the sensitization of silicon discs	0 %	—	31.12.2023
ex37071000	15	Sensitising emulsion consisting of:by weight not more than 12 % of diazooxonaphthalenesulphonic acid esterphenolic resinsin a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone	0 %	—	31.12.2023
ex37071000	25	Sensitising emulsion containing:phenolic or acrylic resins,a maximum 2 % by weight of light sensitive acid precursor,in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate	0 %	—	31.12.2023
ex37071000	30	Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate	0 %	—	31.12.2023
ex37071000	35	Sensitising emulsion or preparation containing one or more of:acrylate polymers,methacrylate polymers,derivatives of styrene polymers,containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate	0 %	—	31.12.2021
ex37071000	40	Sensitising emulsion, containing:not more than 10 % by weight of naphthoquinonediazide esters,2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene,not more than 7 % by weight of epoxy-containing derivatives,dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate	0 %	—	31.12.2021
ex37071000	45	Photosensitive emulsion consisting of cyclized polyisoprene containing:55 % or more but not more than 75 % by weight of xylene, and12 % or more but not more than 18 % by weight of ethylbenzene	0 %	—	31.12.2019
ex37071000	50	Photosensitive emulsion containing by weight:20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,5 % or more but not more than 30 % of acrylates,not more than 12 % of a photoinitiator	0 %	—	31.12.2019
ex37071000	55	Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidone with a polymer content by weight 10 % or more	0 %	—	31.12.2023
ex37071000	60	Sensitising emulsion, containing by weight:not more than 5 % of photoacid generator,2 % or more but not more than 50 % of phenolic resins, andnot more than 7 % of epoxy-containing derivatives,dissolved in heptan-2-one and/or ethyllactate	0 %	—	31.12.2022
ex37079029	10	Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers	0 %	—	31.12.2023
ex37079029	40	Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers	0 %	—	31.12.2023
ex37079029	50	Dry ink powder or toner blend, consisting of:styrene acrylate/butadiene copolymereither carbon black or an organic pigmentwhether or not containing polyolefin or amorphous silicafor use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers	0 %	—	31.12.2022
ex38011000	10	Artificial graphite in powder form, with:an average particle size of 2,5 μm or more but not more than 26,5 μm,an iron content of less than 40 ppm,a copper content of less than 5 ppm,a nickel content of less than 5 ppm,an average surface area (N2-atmosphere) of 1,2 m2/g or more but not more than 20,4 m2/g, anda magnetic metal impurity of less than 3 ppm	0 %	—	31.12.2022
ex38019000	10	Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)	0 %	—	31.12.2021
ex38019000	30	Natural or artificial graphite based powder, pitch coated, with:an average particle size of 2,5 μm or more but not more than 26,5 μm,an iron content of less than 40 ppm,a copper content of less than 5 ppm,a nickel content of less than 5 ppm,an average surface area (N2-atmosphere) of 1,2 m2/g or more but not more than 20,4 m2/g, anda magnetic metal impurity of less than 3 ppm	0 %	—	31.12.2023
ex38021000	10	Mixture of activated carbon and polyethylene, in form of powder	0 %	—	31.12.2020
ex38021000	20	Chemically activated carbon in granular form with a Butane Working Capacity of 11 g butane/100 ml or more (as determined by the ASTM D 5228 method) used for vapour absorption and desorption in emission control canisters of motor vehicles	0 %	—	31.12.2022
ex38021000	30	Chemically activated carbon in pellet (cylindrical) form, with:a diameter of 2 mm or more but not more than 3 mm, anda Butane Working Capacity of 5 g butane/100 ml or more (as determined by the ASTM D 5228 method),used for vapour absorption and desorption in emission control canisters of motor vehicles	0 %	—	31.12.2021
38059010		Pine oil	1.7 %	—	31.12.2023
ex38069000ex39094000	1060	Phenolic modified derivative of rosin resin,containing by weight 50 % or more but not more than 75 % of rosin esters,with an acid value of not more than 25,of a kind used in offset printing	0 %	—	31.12.2021
ex38089190	10	Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide	0 %	—	31.12.2023
ex38089190	30	Preparation containing endospores or spores and protein crystals derived from either:Bacillus thuringiensis Berliner subsp. aizawai and kurstaki, orBacillus thuringiensis subsp. kurstaki, orBacillus thuringiensis subsp. israelensis, orBacillus thuringiensis subsp. aizawai, orBacillus thuringiensis subsp. tenebrionis	0 %	—	31.12.2019
ex38089190	40	Spinosad (ISO)	0 %	—	31.12.2023
ex38089190	60	Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L)	0 %	—	31.12.2022
ex38089230	10	Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more	0 %	—	31.12.2020
ex38089290	10	Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale	0 %	—	31.12.2023
ex38089290	30	Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:24 % or more but not more than 26 % of pyrithione zinc (INN), or39 % or more but not more than 41 % of pyrithione zinc (INN)	0 %	—	31.12.2023
ex38089290	50	Preparations based on copper pyrithione (CAS RN 14915-37-8)	0 %	—	31.12.2019
ex38089323	10	Herbicide containing flazasulfuron (ISO) as an active ingredient	0 %	—	31.12.2019
ex38089327	40	Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight:30 % or more of tepraloxydim (ISO), andnot more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons	0 %	—	31.12.2021
ex38089390	10	Preparation, in the form of granules, containing by weight:38,8 % or more but not more than 41,2 % of Gibberellin A3, or9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7	0 %	—	31.12.2019
ex38089390	20	Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amineof a kind used in plant growth regulators	0 %	—	31.12.2020
ex38089390	30	Aqueous solution containing by weight:1,8 % of sodium para-nitrophenolate,1,2 % of sodium ortho-nitrophenolate,0,6 % of sodium 5-nitroguaiacolate,for use in the manufacture of a plant growth regulator	0 %	—	31.12.2020
ex38089390	40	Mixed white powder containing by weight:3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 %, andcontaining less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene,for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator	0 %	—	31.12.2020
ex38089390	50	Preparation in the form of powder, containing by weight:55 % or more of Gibberellin A4,1 % or more but not more than 35 % of Gibberellin A7,90 % or more of Gibberellin A4 and Gibberellin A7 combined,not more than 10 % of a combination of water and other naturally occurring Gibberellins,of a kind used in plant growth regulators	0 %	—	31.12.2020
ex38089390	60	Preparation in the form of tablets containing by weight:0,55 % or more but not more than 2,50 % of 1-methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, andless than 0,05 % of each of the two impurities, 1-chloro-2-methylpropene (CAS RN 513-37-1) and 3-chloro-2-methylpropene (CAS RN 563-47-3),for coating	0 %	—	31.12.2022
ex38089420	30	Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)	0 %	—	31.12.2019
ex38089990	10	Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water	0 %	—	31.12.2020
ex38089990	20	Abamectin (ISO) (CAS RN 71751-41-2)	0 %	—	31.12.2023
ex38099100	10	Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate	0 %	—	31.12.2023
ex38099200	20	Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol	0 %	—	31.12.2019
ex38101000	10	Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:70 % or more, but not more than 90 % of tinnot more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indiumfor use in the electro technical industry	0 %	—	31.12.2023
ex38111900	10	Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:4,9 % of 1,2,4-trimethyl-benzene,4,9 % of naphthalene, and0,5 % of 1,3,5-trimethyl-benzene	0 %	—	31.12.2019
ex38112100	10	Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils	0 %	—	31.12.2023
ex38112100	11	Dispersing agent and oxidation inhibitor containing:o-amino polyisobutylenephenol (CAS RN 78330-13-9),more than 30 % by weight but not more than 50 % by weight of mineral oils,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2021
ex38112100	12	Dispersing agent containing:esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),35 % or more but not more than 55 % by weight of mineral oils, andwith a chlorine content of not more than 0,05 % by weight,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2020
ex38112100	13	Additives containing:borated magnesium (C16-C24) alkylbenzene sulphonates, andmineral oils,having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	14	Dispersing agent:containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),containing 35 % or more but not more than 55 % by weight of mineral oils,with a chlorine content by weight of not more than 0,05 %,having a total base number of less than 15,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2020
ex38112100	16	Detergent containing:Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol),40 % or more but not more than 60 % by weight of mineral oils, andhaving a total base number more than 120,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2020
ex38112100	18	Detergent containing:long chain alkyltoluene calcium sulphonates,more than 30 % but not more than 50 % by weight of mineral oils, andhaving a total base number of more than 310 but not more than 340,used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2020
ex38112100	19	Additives containing:a polyisobutylene succinimide based mixture, andmore than 30 % but not more than 50 % by weight of mineral oils,having a total base number of more than 40, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	20	Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil	0 %	—	31.12.2023
ex38112100	25	Additives containing:a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10000 but not more than 20000, andmore than 15 %, but not more than 30 % by weight of mineral oils,for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	27	Additives containing:20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, andmineral oils,for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	30	Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
ex38112100	33	Additives containing:calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), andmineral oils,having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils	0 %	—	31.12.2019
ex38112100	37	Additives containing:a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, andmore than 50 % but not more than 75 % by weight of mineral oils,for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	48	Additives containing:overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9), andby weight more than 25 % but not more than 50 % of mineral oils,having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	50	Additives for lubricating oils:based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),containing mineral oils,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
ex38112100	53	Additives containing:overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 %, andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	55	Additives containing:low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8), andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	60	Additives for lubricating oils, containing mineral oils;based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
ex38112100	63	Additives containing:an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 %, andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	65	Additives containing:a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), andmore than 35 % but not more than 50 % by weight of mineral oils,having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112100	70	Additives for lubricating oils,containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
ex38112100	73	Additives containing:borated succinimide compounds (CAS RN 134758-95-5),mineral oils, andhaving a total base number (TBN) greater than 40,for use in the manufacture of additive mixtures for lubricating oils	0 %	—	31.12.2023
ex38112100	75	Additives containing:Calcium (C10-C14) dialkylbenzenesulfonates,more than 40 %, but not more than 60 % by weight of mineral oils,with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2020
ex38112100	77	Antifoam additives consisting of:a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, andmore than 50 % but not more than 80 % by weight of mineral oils,for use in the manufacture of additive blends for lubricating oils	0 %	—	31.12.2020
ex38112100	80	Additives containing:polyisobutylene aromatic polyamine succinimide,more than 40 % but not more than 60 % by weight of mineral oils,with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils	0 %	—	31.12.2020
ex38112100	83	Additives containing:polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing more than 31,9 % but not more than 43,3 % by weight of mineral oils,not more than 0,05 % by weight chlorine, andhaving a total base number (TBN) greater than 20,for use in the manufacture of additives blends for lubricating oils	0 %	—	31.12.2019
ex38112100	85	Additives:containing more than 20 % or more but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,of a kind used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2022
ex38112900	15	Additives containing:products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9), andmore than15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent,for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112900	18	Additive consisting of dihydroxy butanedioic acid - (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, of a kind used in the manufacture of automotive engine oils	0 %	—	31.12.2023
ex38112900	20	Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils	0 %	—	31.12.2022
ex38112900	25	Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112900	30	Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
ex38112900	35	Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112900	40	Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils	0 %	—	31.12.2022
ex38112900	45	Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112900	50	Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	—	31.12.2022
ex38112900	65	Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2020
ex38112900	70	Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112900	75	Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils	0 %	—	31.12.2021
ex38112900	80	Additives containing:more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), andmore than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38112900	85	Additives consisting of a mixture of3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils	0 %	—	31.12.2019
ex38119000	10	Dinonylnaphthylsulphonic acid salt, in a mineral oil solution	0 %	—	31.12.2023
ex38119000	40	Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol	0 %	—	31.12.2022
ex38119000	50	Corrosion inhibitor containing:polyisobutenyl succinic acid, andmore than 5 % and not more than 20 % by weight of mineral oils,for use in the manufacture of blends of additives for fuels	0 %	—	31.12.2021
ex38121000	10	Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)	0 %	—	31.12.2021
ex38122090	10	Plasticiser, containing:bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)	0 %	—	31.12.2023
ex38123910	10	4,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6)	0 %	—	31.12.2019
ex38123990	20	Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate	0 %	—	31.12.2023
ex38123990	25	UV photo stabiliser containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2),α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1),polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3),bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), andmethyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)	0 %	—	31.12.2023
ex38123990	30	Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol	0 %	—	31.12.2019
ex38123990	35	Mixture containing by weight:25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)not more than 20 % of other organic compoundson a carrier of polypropylene (CAS RN 9003-07-0)	0 %	—	31.12.2023
ex38123990	40	Mixture of:80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate	0 %	—	31.12.2023
ex38123990	55	UV-stabilizer, containing:2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6), andeither N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), orN,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)	0 %	—	31.12.2021
ex38123990	65	Stabiliser for plastic material containing:2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)	0 %	—	31.12.2021
ex38123990	70	Light stabiliser containing:branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and1-methoxy-2-propyl acetate (CAS RN 108-65-6)	0 %	—	31.12.2021
ex38123990	80	UV-stabilizer, consisting of:a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), andeither an o-hydroxyphenyl triazine UV light absorber, ora chemically modified phenolic compound	0 %	—	31.12.2022
ex38140090	20	Mixture containing by weight:69 % or more but not more than 71 % of 1-methoxypropan-2-ol,29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate	0 %	—	31.12.2023
ex38140090	40	Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether	0 %	—	31.12.2023
ex38151200	10	Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver	0 %	—	31.12.2023
ex38151990	10	Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)	0 %	—	31.12.2021
ex38151990	13	Catalyst consisting of:chromium trioxide (CAS RN 1333-82-0),dichromium trioxide (CAS RN 1308-38-9),on a support of aluminium oxide (CAS RN 1344-28-1)	0 %	—	31.12.2021
ex38151990	15	Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile	0 %	—	31.12.2023
ex38151990	20	Catalyst,in the form of solid spheres,of a diameter of 4 mm or more but not more than 12 mm, andconsisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,for use in the manufacture of acrylic acid	0 %	—	31.12.2023
ex38151990	25	Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde	0 %	—	31.12.2023
ex38151990	30	Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene	0 %	—	31.12.2023
ex38151990	35	Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a support of silicon dioxide in the form of a powder	0 %	—	31.12.2023
ex38151990	65	Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide	0 %	—	31.12.2023
ex38151990	70	Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide	0 %	—	31.12.2023
ex38151990	75	Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide	0 %	—	31.12.2023
ex38151990	80	Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil	0 %	—	31.12.2023
ex38151990	85	Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder	0 %	—	31.12.2023
ex38151990	86	Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins	0 %	—	31.12.2023
ex38151990ex85069000	8710	Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)	0 %	—	31.12.2023
ex38159090	16	Initiator based on dimethylaminopropyl urea	0 %	—	31.12.2022
ex38159090	18	Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)] (CAS RN 1217890-37-3), used to accelerate chemical oxidation or bleaching	0 %	—	31.12.2022
ex38159090	22	Catalyst in powder form consisting by weight of 95 % (± 1 %) titanium dioxide and 5 % (± 1 %) silicon dioxide	0 %	—	31.12.2022
ex38159090	25	Catalyst consisting by weight of:30 % or more but not more than 33 % of bis(4-(diphenylsulphonio)phenyl)sulphide bis(hexafluorophosphate) (CAS RN 74227-35-3), and24 % or more but not more than 27 % of diphenyl(4-phenylthio)phenylsuphonium hexafluorophosphate (CAS RN 68156-13-8),in propylene carbonate (CAS RN 108-32-7)	0 %	—	31.12.2023
ex38159090	30	Catalyst, consisting of a suspension in mineral oil of:tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, andsilicon dioxide,containing 6,6 % (± 0,6 %) by weight of magnesium, andcontaining 2,3 % (± 0,2 %) by weight of titanium	0 %	—	31.12.2020
ex38159090	35	Catalyst containing by weight:25 % or more but not more than 27,5 % of bis[4-(diphenylsuphonio)phenyl]sulphide bis(hexafluoroantimonate) (CAS RN 89452-37-9), and20 % or more but not more than 22,5 % of diphenyl(4-phenylthio)phenylsufonium hexafluoroantimonate (CAS RN 71449-78-0),in propylene carbonate (CAS RN 108-32-7)	0 %	—	31.12.2023
ex38159090	40	Catalyst:containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm,for use in the manufacture of acrylic acid	0 %	—	31.12.2023
ex38159090	50	Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium	0 %	—	31.12.2023
ex38159090	70	Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols	0 %	—	31.12.2019
ex38159090	80	Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol	0 %	—	31.12.2020
ex38159090	81	Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate	0 %	—	31.12.2023
ex38159090	85	Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins	0 %	—	31.12.2022
ex38159090	86	Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide	0 %	—	31.12.2023
ex38159090	88	Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:4 % or more but not more than 10 % of titanium, and10 % or more but not more than 20 % magnesium	0 %	—	31.12.2023
ex38159090	89	Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile	0 %	—	31.12.2021
ex38170050	10	Mixture of alkylbenzenes (C14-26) containing by weight:35 % or more but not more than 60 % of eicosylbenzene,25 % or more but not more than 50 % of docosylbenzene,5 % or more but not more than 25 % of tetracosylbenzene	0 %	—	31.12.2023
ex38170080	10	Mixture of alkylnaphthalenes, containing by weight:88 % or more but not more than 98 % of hexadecylnaphthalene2 % or more but not more than 12 % of dihexadecylnaphthalene	0 %	—	31.12.2023
ex38170080	20	Mixture of branched alkyl benzenes mainly containing dodecyl benzenes	0 %	—	31.12.2023
ex38170080	30	Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms	0 %	—	31.12.2021
ex38190000	20	Fire resistant hydraulic fluid based on phosphate ester	0 %	—	31.12.2023
ex38231930ex38231930	2030	Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 2309	0 %	—	31.12.2023
ex38231990ex38231990	2030	Palm acid oils from refining for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 2309	0 %	—	31.12.2023
ex38249915	10	Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets	0 %	—	31.12.2023
ex38249992	23	Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol	0 %	—	31.12.2020
ex38249992	25	Preparation containing by weight:25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)	0 %	—	31.12.2021
ex38249992	26	Preparation containing by weight:60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5),15 % or more but not more than 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and10 % or more but not more than 15 % of 2-sec-butylphenol (CAS RN 89-72-5)	0 %	—	31.12.2022
ex38249992	27	4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent	0 %	—	31.12.2021
ex38249992	28	Aqueous solution containing by weight10 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),10 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9), and0,5 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)	0 %	—	31.12.2020
ex38249992	29	Preparation containing by weight:85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate	0 %	—	31.12.2020
ex38249992	30	Aqueous solution of caesium formate and potassium formate containing by weight:1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), andwhether or not containing not more than 9 % of additives	0 %	—	31.12.2021
ex38249992	32	Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)	0 %	—	31.12.2019
ex38249992ex38249993ex38249996	334040	Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:on a support of mineral wax, whether or not modified chemically, orin the form of a solution in an organic solvent	0 %	—	31.12.2023
ex38249992	35	Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate	0 %	—	31.12.2023
ex38249992	36	Calcium phosphonate phenate, dissolved in mineral oil	0 %	—	31.12.2021
ex38249992	37	Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %	0 %	—	31.12.2023
ex38249992	39	Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol	0 %	—	31.12.2023
ex38249992	40	Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent	0 %	—	31.12.2020
ex38249992	42	Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene	0 %	—	31.12.2023
ex38249992	45	Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors	0 %	—	31.12.2023
ex38249992	46	Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran	0 %	—	31.12.2020
ex38249992	47	Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2), andtrihexylphosphine oxide (CAS RN 3084-48-8)	0 %	—	31.12.2022
ex38249992	49	Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)	0 %	—	31.12.2022
ex38249992	50	Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses	0 %	—	31.12.2022
ex38249992	51	Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid	0 %	—	31.12.2023
ex38249992	53	Preparations consisting predominantly of ethylene glycol and:either diethylene glycol, dodecandioic acid and ammonia water,or N,N-dimethylformamide,or γ-butyrolactone,or silicon oxide,or ammonium hydrogen azelate,or ammonium hydrogen azelate and silicon oxide,or dodecandioic acid, ammonia water and silicon oxide,for the manufacture of electrolytic capacitors	0 %	—	31.12.2023
ex38249992	54	Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)	0 %	—	31.12.2021
ex38249992	55	Additives for paints and coatings, containing:a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and30 % or more but not more than 35 % by weight of isobutyl alcohol	0 %	—	31.12.2023
ex38249992	56	Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units	0 %	—	31.12.2019
ex38249992	57	Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units	0 %	—	31.12.2019
ex38249992	59	Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran	0 %	—	31.12.2023
ex38249992	60	N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %	0 %	—	31.12.2020
ex38249992	61	3′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine	0 %	—	31.12.2020
ex38249992	64	Preparation containing by weight:89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol0,1 % or more but not more than 1 % of colourants1 % or more but not more than 10 % of fluoropolymers	0 %	—	31.12.2021
ex38249992	65	Mixture of primary tert-alkylamines	0 %	—	31.12.2019
ex38249992	68	Preparation containing by weight:20 % (± 1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9),Dissolved in:10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5),64 % (± 7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5), and6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)	0 %	—	31.12.2020
ex38249992	69	Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5),7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate), andnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)	0 %	—	31.12.2020
ex38249992	70	Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine	0 %	—	31.12.2019
ex38249992	72	N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)	0 %	—	31.12.2023
ex38249992	76	Preparation containing:74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4), and10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)	0 %	—	31.12.2023
ex38249992	78	Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents	0 %	—	31.12.2023
ex38249992	80	Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)	0 %	—	31.12.2022
ex38249992	82	T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene	0 %	—	31.12.2019
ex38249992	84	Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:either an aluminium-alkyl compound, oran organic complex of tungsten, oran organic complex of molybdenum	0 %	—	31.12.2023
ex38249992	88	2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated	0 %	—	31.12.2020
ex38249993	30	Powder Mixture containing by weight:85 % or more of zinc diacrylate (CAS RN 14643-87-9),not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), andnot more than 10 % of zinc stearate (CAS RN 557-05-1)	0 %	—	31.12.2019
ex38249993	35	Paraffin with a level of chlorination of 70 % or more	0 %	—	31.12.2019
ex38249993	38	Mixture of 4,4′-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4′-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9)	0 %	—	31.12.2022
ex38249993	42	Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea	0 %	—	31.12.2023
ex38249993	45	Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:not more than 20 % of disodium sulphate, andnot more than 10 % of sodium chloride	0 %	—	31.12.2021
ex38249993	50	Preparation, consisting of acesulfame potassium (CAS RN 55589-62-3) and potassium hydroxide (CAS RN 1310-58-3)	0 %	—	31.12.2021
ex38249993	53	Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder	0 %	—	31.12.2023
ex38249993	55	Mixture containing by weight70 % or more, but not more than 90 % of (S)-indoline-2-carboxylic acid (CAS RN 79815-20-6), and10 % or more, but not more than 30 % of o-chlorocinnamic acid (CAS RN 3752-25-8)	0 %	—	31.12.2021
ex38249993	60	Mixture of phytosterols (CAS RN 949109-75-5) in powder form containing by weight:40 % or more but not more than 88 % of sitosterols,20 % or more but not more than 63 % of campesterols,14 % or more but not more than 38 % of stigmasterols,not more than 13 % brassicasterols, andnot more than 5 % sitostanols	0 %	—	31.12.2023
ex38249993	63	Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters	0 %	—	31.12.2022
ex38249993	65	Reaction mass of 1,1′-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene	0 %	—	31.12.2023
ex38249993	70	Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane)	0 %	—	31.12.2019
ex38249993	75	Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols	0 %	—	31.12.2019
ex38249993ex38249996	8067	Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material	0 %	—	31.12.2019
ex38249993ex38249996	8385	Preparation containing:C,C′-azodi(formamide) (CAS RN 123-77-3),magnesium oxide (CAS RN 1309-48-4), andzinc bis(p-toluene sulphinate) (CAS RN 24345-02-6),in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C	0 %	—	31.12.2023
ex38249993ex38249996	8557	Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges	0 %	—	31.12.2023
ex38249993	88	Mixture of phytosterols containing by weight:60 % or more, but not more than 80 % of sitosterols,less than 15 % of campesterols,less than 5 % of stigmasterols, andless than 15 % of betasitostanols	0 %	—	31.12.2022
ex38249996	30	Rare-earth concentrate containing by weight:20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3),2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8),10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), andnot more than 65 % of zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide	0 %	—	31.12.2022
ex38249996	35	Calcined bauxite (refractory grade)	0 %	—	31.12.2023
ex38249996	37	Structured silica alumina phosphate	0 %	—	31.12.2019
ex38249996	45	Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with:a particle size of less than 10 μm,a purity by weight of more than 98 %	0 %	—	31.12.2022
ex38249996	46	Manganese zinc ferrite granulate, containing by weight:52 % or more but not more than 76 % of iron(III)oxide,13 % or more but not more than 42 % of manganese oxide, and2 % or more but not more than 22 % of zinc oxide	0 %	—	31.12.2020
ex38249996	47	Mixed metals oxides, in the form of powder, containing by weight:either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,or 30 % or more of lead and 5 % or more of niobium,for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors	0 %	—	31.12.2023
ex38249996	48	Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %	0 %	—	31.12.2020
ex38249996	50	Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators	0 %	—	31.12.2022
ex38249996	55	Carrier in powder form, consisting of:ferrite (Iron oxide) (CAS RN 1309-37-1)manganese oxide (CAS RN 1344-43-0)magnesium oxide (CAS RN 1309-48-4)styrene acrylate copolymerto be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers	0 %	—	31.12.2023
ex38249996	60	Fused magnesia containing by weight 15 % or more of dichromium trioxide	0 %	—	31.12.2021
ex38249996	65	Aluminium sodium silicate, in the form of spheres of a diameter of:either 1,6mm or more but not more than 3,4 mm,or 4mm or more but not more than 6 mm	0 %	—	31.12.2023
ex38249996	70	Powder containing by weight:28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)	0 %	—	31.12.2021
ex38249996	73	Reaction product, containing by weight:1 % or more but not more than 40 % of molybdenum oxide,10 % or more but not more than 50 % of nickel oxide,30 % or more but not more than 70 % of tungsten oxide	0 %	—	31.12.2019
ex38249996	74	Mixture with a non-stoichiometric composition:with a crystalline structure,with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm	0 %	—	31.12.2021
ex38249996	77	Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide	0 %	—	31.12.2019
ex38249996	80	Mixture consisting of:64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9),25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3), andnot more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)	0 %	—	31.12.2021
ex38249996	83	Cubic Boron nitride (CAS RN 10043-11-5) coated with nickel and/or nickelphosphide (CAS RN 12035-64-2)	0 %	—	31.12.2023
ex38249996	87	Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:0,1 % or more but not more than 1 % of platinum, and0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)	0 %	—	31.12.2022
ex38260010ex38260010	2029	Mixture of fatty acid methyl esters containing by weight at least:65 % or more but not more than 75 % of C12 FAME,21 % or more but not more than 28 % of C14 FAME,4 % or more but not more than 8 % of C16 FAME,for use in the manufacture of detergents and home and personal care products	0 %	—	31.12.2023
ex38260010ex38260010	5059	Mixture of fatty acid methyl esters containing by weight at least:50 % or more but not more than 58 % of C8-FAME35 % or more but not more than 50 % of C10-FAMEfor the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid	0 %	—	31.12.2023
ex39011010ex39014000	2010	High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, witha melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min, anda density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, anda vicat softening temperature of min. 94 °C	0 %	m3	31.12.2019
ex39011090	30	Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper	0 %	—	31.12.2021
ex39014000	20	Octene linear low-density polyethylene (LLDPE) in the form of pellets of a kind used in the co-extrusion processing of films for flexible food packaging with:10 % or more but not more than 20 % by weight of octene,a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),a melt index (190 °C/2,16 kg) of 0,4 g / 10 min or more but not more than 0,6 g/10 min,a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,a gel area per 24,6 cm3 of not more than 20 mm2, andan anti-oxidant level of not more than 240 ppm	0 %	m3	31.12.2020
ex39014000	30	Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:more than 10 % but not more than 20 % by weight of copolymer,a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, anda density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,for use in the co-extrusion processing of films for flexible food packaging	0 %	m3	31.12.2020
ex39014000	40	Block copolymer of ethylene with octene in the form of pellets:with a specific gravity of 0,862 or more, but not more than 0,865,able to stretch to at least 200 % its original length,with a hysteresis of 50 % (± 10 %),with permanent deformation of not more than 20 %,for use in the manufacture of napkin liners for babies	0 %	—	31.12.2020
ex39019080	53	Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) withan acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), anda melt flow rate of 14g/10 min (MFR 125 °C/2,16 kg, ASTM D1238) or more	0 %	m3	31.12.2020
ex39019080	55	Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:an acrylic acid content of 6 % or more but not more than 50 % by weight, anda melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)	0 %	—	31.12.2020
ex39019080	67	Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more	0 %	—	31.12.2020
ex39019080	70	Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3 g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)	0 %	—	31.12.2020
ex39019080	73	Mixture containing by weight:80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1), and6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)	0 %	—	31.12.2021
ex39019080	91	Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid	0 %	—	31.12.2023
ex39019080	92	Chlorosulphonated polyethylene	0 %	—	31.12.2023
ex39019080	93	Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets	0 %	—	31.12.2023
ex39019080	94	Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene	0 %	—	31.12.2023
ex39019080	97	Chlorinated polyethylene, in the form of powder	0 %	—	31.12.2023
ex39021000	20	Polypropylene, containing no plasticiser:of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),of a heat of fusion of 15 J/g or more but not more than 70 J/g,of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)	0 %	—	31.12.2023
ex39021000	40	Polypropylene, containing no plasticiser:of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method),of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method),of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method),with 40 % or more but not more than 80 % by weight of polypropylene,with 10 % or more but not more than 30 % by weight of glass fibre,with 10 % or more but not more than 30 % by weight of mica	0 %	—	31.12.2019
ex39022000	10	Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800	0 %	—	31.12.2023
ex39022000	20	Hydrogenated polyisobutene, in liquid form	0 %	—	31.12.2023
ex39023000	91	A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39	0 %	—	31.12.2023
ex39023000	95	A-B-A block copolymer, consisting of:a copolymer of propylene and ethylene, and21 % (± 3 %) by weight of polystyrene	0 %	—	31.12.2021
ex39023000	97	Liquid ethylene-propylene-copolymer with:a flashpoint of 250 °C or more,a viscosity index of 150 or more,of a number average molecular weight (Mn) of 650 or more	0 %	—	31.12.2021
ex39029090	52	Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin	0 %	—	31.12.2023
ex39029090	55	Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene	0 %	—	31.12.2023
ex39029090	60	Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:liquid at room temperatureobtained by cationic polymerisation of C-5 alkenes monomerswith a number average molecular weight (Mn) of 370 (± 50)with a weight average molecular weight (Mw) of 500 (± 100)	0 %	—	31.12.2019
ex39029090	92	Polymers of 4-methylpent-1-ene	0 %	—	31.12.2023
ex39029090	94	Chlorinated polyolefins, whether or not in a solution or dispersion	0 %	—	31.12.2023
ex39029090	98	Synthetic poly-alpha-olefin with a viscosity at 100 °Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene	0 %	—	31.12.2021
ex39031900	40	Crystalline polystyrene with:a melting point of 268 °C or more but not more than 272 °C,a setting point of 232 °C or more but not more than 247 °C,whether or not containing additives and filling material	0 %	—	31.12.2021
ex39039090	15	Copolymer in the form of granules containing by weight:78 (± 4 %) of styrene,9 (± 2 %) of n-butyl acrylate,11 (± 3 %) of n-butyl methacrylate,1,5 (± 0,7 %) of methacrylic acid, and0,01 % or more but not more than 2,5 % of polyolefinic wax	0 %	—	31.12.2023
ex39039090	20	Copolymer in the form of granules containing by weight:83 ± 3 % styrene,7 ± 2 % n-butyl acrylate,9 ± 2 % n-butyl methacrylate, and0,01 % or more but not more than 1 % of polyolefinic wax	0 %	—	31.12.2021
ex39039090	25	Copolymer in the form of granules containing by weight:82 ± 6 % styrene,13,5 ± 3 % n-butyl acrylate,1 ± 0,5 % methacrylic acid, and0,01 % or more but not more than 8,5 % of polyolefinic wax	0 %	—	31.12.2021
ex39039090ex39119099	3543	Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C	0 %	—	31.12.2023
ex39039090ex39046980	3888	Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)	0 %	—	31.12.2022
ex39039090	45	Preparation, in form of powder, containing by weight:86 % or more but not more than 90 % of styrene-acrylic-copolymer, and9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)	0 %	m3	31.12.2019
ex39039090	46	Copolymer in the form of granules containing by weight:74 % (± 4 %) styrene,24 % (± 2 %) n-butylacrylate, and0,01 % or more but not more than 2 % methacrylic acid	0 %	m3	31.12.2020
ex39039090	55	Preparation, in form of an aqueous suspension, containing by weight:25 % or more but not more than 26 % of styrene-acrylic-copolymer, and5 % or more but not more than 6 % of glycol	0 %	—	31.12.2019
ex39039090ex39119099	6060	Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form	0 %	—	31.12.2021
ex39039090	65	Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)	0 %	—	31.12.2020
ex39039090	70	Copolymer in the form of granules containing by weight:75 % (± 7 %) styrene, and25 % (± 7 %) methylmethacrylate	0 %	m3	31.12.2020
ex39039090	80	Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:minimum 65 % styrene,maximum 25 % divinylbenzene,for use in the manufacture of ion exchange resins	0 %	—	31.12.2023
ex39039090	86	Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene35 % or more but not more than 45 % of poly(phenylene ether)not more than 10 % of other additivesand with one or more of the following special colour effects:metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigmentfluorescent, as characterized by emitting light during absorption of ultraviolet radiationbright white, as characterized by L* not less than 92 and b* not more than 2 and a* between – 5 and 7 on the CIELab colour scale	0 %	—	31.12.2023
ex39041000	20	Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with:a degree of polymerisation of 1000 (± 300) monomer units,a coefficient of heat transmission (K-value) of 60 or more, but not more than 70,a volatile material content of less than 2,00 % by weight,a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight,for use in the manufacture of battery separators	0 %	—	31.12.2019
ex39043000ex39044000	3091	Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:87 % or more but not more than 92 % of vinyl chloride,2 % or more but not more than 9 % of vinyl acetate, and1 % or more but not more than 8 % of vinyl alcohol,in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink	0 %	—	31.12.2023
ex39045090	92	Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments	0 %	—	31.12.2019
ex39046100	20	Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions	0 %	—	31.12.2023
ex39046980	81	Poly(vinylidene fluoride) (CAS RN 24937-79-9)	0 %	—	31.12.2020
ex39046980	85	Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder form, whether or not with fillers	0 %	—	31.12.2022
ex39046980	94	Copolymer of ethylene and tetrafluoroethylene	0 %	—	31.12.2023
ex39046980	96	Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39	0 %	—	31.12.2023
ex39046980	97	Copolymer of chlorotrifluoroethylene and vinylidene difluoride	0 %	—	31.12.2019
ex39053000	10	Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors	0 %	—	31.12.2022
ex39059100	40	Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene	0 %	—	31.12.2022
ex39059990	95	Hexadecylated or eicosylated polyvinylpyrrolidone	0 %	—	31.12.2023
ex39059990	96	Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol	0 %	—	31.12.2023
ex39059990	97	Povidone (INN)-iodine (CAS RN 25655-41-8)	0 %	—	31.12.2023
ex39059990	98	Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups	0 %	—	31.12.2023
39069060		Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide	0 %	—	31.12.2023
ex39069090	10	Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004	0 %	—	31.12.2023
ex39069090	23	Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm	0 %	—	31.12.2022
ex39069090	27	Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate	0 %	—	31.12.2022
ex39069090	33	Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm	0 %	—	31.12.2020
ex39069090	37	Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm	0 %	—	31.12.2020
ex39069090	40	Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:a viscosity of not more than 50000 Pa · s at 120 °C as determined by the test method ASTM D 3835,a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,a residual monomer content of less than 1 %	0 %	—	31.12.2020
ex39069090	41	Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30	0 %	—	31.12.2019
ex39069090	43	Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)	0 %	—	31.12.2021
ex39069090	50	Polymers of esters of acrylic acid with one or more of the following monomers in the chain:chloromethyl vinyl ether,chloroethyl vinyl ether,chloromethylstyrene,vinyl chloroacetate,methacrylic acid,butenedioic acid monobutyl ester,containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39	0 %	—	31.12.2023
ex39069090	53	Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:75 % or more but not more than 85 % of polyacrylamide, and15 % or more but not more than 25 % of polyethylene glycol	0 %	—	31.12.2021
ex39069090	60	Aqueous dispersion containing by weight:more than 10 % but not more than 15 % of ethanol, andmore than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative	0 %	—	31.12.2023
ex39069090	73	Preparation containing by weight:33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer,24 % or more but not more than 28 % of propylene glycol, and37 % or more but not more than 41 % of water	0 %	—	31.12.2019
ex39071000	10	Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene	0 %	—	31.12.2020
ex39071000	20	Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine	0 %	—	31.12.2020
ex39072011	10	Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more	0 %	—	31.12.2023
ex39072011	20	Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40000	0 %	—	31.12.2023
ex39072011	60	Preparation containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2), andα-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)	0 %	—	31.12.2021
ex39072020	20	Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1)	0 %	—	31.12.2022
ex39072020	25	Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight:48 % or more but not more than 52 % of propylene oxide, and48 % or more but not more than 52 % of butylene oxide	0 %	—	31.12.2021
ex39072020	30	Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone	0 %	—	31.12.2023
ex39072020	35	Mixture containing by weight:5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)	0 %	—	31.12.2023
ex39072020	40	Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100)	0 %	—	31.12.2023
ex39072020ex39072099	5075	Poly(p-phenylene oxide) in the form of powderwith a glasstransitiontemperature of 210 °C,with a weight average molecular weight (Mw) of 35000 or more but not more than 80000,with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram	0 %	—	31.12.2019
ex39072020	60	Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium	0 %	—	31.12.2022
ex39072099	15	Poly(oxypropylene) having alkoxysilyl end-groups	0 %	—	31.12.2023
ex39072099	20	2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide	0 %	—	31.12.2023
ex39072099	30	Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)	0 %	—	31.12.2023
ex39072099	40	N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa	0 %	—	31.12.2023
ex39072099	45	Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups	0 %	—	31.12.2023
ex39072099	50	Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient	0 %	—	31.12.2023
ex39072099	55	Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5000	0 %	—	31.12.2023
ex39072099	60	Polytetramethylene oxide di-p-aminobenzoate	0 %	—	31.12.2021
ex39072099	70	α-[3-(3-Maleimido-1-oxopropyl)amino]propyl-ω-methoxy, polyoxyethylene (CAS RN 883993-35-9)	0 %	—	31.12.2019
ex39073000	15	Epoxide resin, halogen-free,containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, andcontaining solvents,for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits	0 %	—	31.12.2020
ex39073000	25	Epoxide resincontaining by weight 21 % or more of brome,not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, andcontaining solvents	0 %	—	31.12.2020
ex39073000ex39269097	4070	Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548	0 %	—	31.12.2023
ex39073000	60	Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)	0 %	—	31.12.2022
ex39073000	70	Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), andnone or not more than 0,5 % of carbon black (CAS RN 1333-86-4)	0 %	—	31.12.2022
ex39074000	35	α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)	0 %	—	31.12.2023
ex39074000	45	α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)	0 %	—	31.12.2023
ex39074000	70	Polycarbonate of phosgene and bisphenol A:containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,with p-cumylphenol endcaps, andwith a weight average molecular weight (Mw) of 29900 or more but not more than 31900	0 %	—	31.12.2019
ex39074000	80	Polycarbonate of carbonic dichloride, 4,4′-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4′-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps	0 %	—	31.12.2019
ex39076900	10	Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol	0 %	—	31.12.2023
ex39076900	40	Poly(ethylene terephthalate) pellets or granules:with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, andcontaining not more than 10 % by weight of other modifiers or additives	0 %	m3	31.12.2021
39077000		Poly(lactic acid)	0 %	—	31.12.2023
ex39079190	10	Diallyl phthalate prepolymer, in powder form	0 %	—	31.12.2019
ex39079905	20	Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers	0 %	—	31.12.2023
ex39079980	10	Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder	0 %	—	31.12.2023
ex39079980	25	Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol	0 %	—	31.12.2022
ex39079980ex39139000	3020	Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)	0 %	—	31.12.2020
ex39079980	35	Copolymer in form of a clear, pale yellow liquid, consisting of:phthalic acid isomers and/or aliphatic dicarboxylic acids,aliphatic diols, andfatty acid end-caps,with:a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH,a viscosity at 25 °C of 2000 cPs or more but not more than 8000 cPs, andan acid value less than 10 mg KOH/g	0 %	—	31.12.2023
ex39079980	40	Polycarbonate of phosgene, bisphenol A, resorcinol, isophthaloyl chloride, terephthaloyl chloride andpolysiloxane, with p-cumylphenolendcaps, and a weight average molecular weight (Mw) of 24100 or more but not more than 25900	0 %	—	31.12.2019
ex39079980	70	Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol	3.5 %	—	31.12.2019
ex39079980	80	Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles	0 %	—	31.12.2020
ex39089000	10	Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39	0 %	—	31.12.2023
ex39089000	30	Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine	0 %	—	31.12.2023
ex39089000	55	1,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine (CAS RN 169284-22-4)	0 %	—	31.12.2020
ex39089000	70	Copolymer containing:1,3-benzenedimethanamine (CAS RN 1477-55-0), andadipic acid (CAS RN 124-04-9),whether or not containing isophthalic acid (CAS RN 121-91-5)	0 %	—	31.12.2019
ex39092000	10	Polymer mixture, containing by weight:60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1),15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0),5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)	0 %	—	31.12.2022
ex39094000	20	Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices	0 %	—	31.12.2020
ex39095090	10	UV curable water soluble liquid photopolymer consisting of a mixture by weight of60 % or more of two-functional acrylated polyurethane oligomers, and30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates	0 %	—	31.12.2019
ex39095090	20	Preparation containing by weight:14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,3 % or more but not more than 5 % of enzymatically modified starch, and77 % or more but not more than 83 % of water	0 %	—	31.12.2019
ex39095090	30	Preparation containing by weight:16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,19 % or more but not more than 23 % of diethylene glycol butyl ether, and60 % or more but not more than 64 % of water	0 %	—	31.12.2019
ex39095090	40	Preparation containing by weight:34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,37 % or more but not more than 39 % of propylene glycol, and26 % or more but not more than 28 % of water	0 %	—	31.12.2019
ex39100000	15	Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated	0 %	—	31.12.2020
ex39100000	20	Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]	0 %	—	31.12.2023
ex39100000	25	Preparations containing by weight:10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)	0 %	—	31.12.2021
ex39100000	35	Preparations containing by weight:30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6), and10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)	0 %	—	31.12.2021
ex39100000	40	Silicones of a kind used in the manufacture of long term surgical implants	0 %	—	31.12.2021
ex39100000	45	Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 MPa · s (CAS RN 70131-67-8)	0 %	—	31.12.2021
ex39100000	50	Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum	0 %	—	31.12.2022
ex39100000	55	Preparation containing by weight:55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)	0 %	—	31.12.2021
ex39100000	60	Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups	0 %	—	31.12.2019
ex39100000	70	Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices	0 %	—	31.12.2023
ex39100000	80	Monomethacryloxypropylterminated poly(dimethylsiloxane)	0 %	—	31.12.2019
ex39111000	81	Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:an iodine value of more than 120, anda Gardner Colour of more than 10 for the pure product, ora Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)	0 %	—	31.12.2023
ex39119019	20	Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing:83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene),a synthetic rubber,whether or not containing by weight 7 % or more of tricyclopentadieneand each separate component containing:either an aluminium-alkyl compound, oran organic complex of tungsten, oran organic complex of molybdenum	0 %	—	31.12.2023
ex39119019	30	Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide	0 %	—	31.12.2022
ex39119019	40	m-Xylene formaldehyde resin	0 %	—	31.12.2021
ex39119019	50	Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form	0 %	—	31.12.2019
ex39119019	60	Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6)	0 %	—	31.12.2019
ex39119019	70	Preparation, containing:Cyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight	0 %	—	31.12.2019
ex39119099	25	Copolymer of vinyltoluene and α-methylstyrene	0 %	—	31.12.2023
ex39119099	30	1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated	0 %	—	31.12.2020
ex39119099	35	Alternated copolymer of ethylene and maleic anhydride (EMA)	0 %	—	31.12.2020
ex39119099	40	Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight	0 %	—	31.12.2023
ex39119099	45	Copolymer of maleic acid and methyl vinyl ether	0 %	—	31.12.2023
ex39119099	53	Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)	0 %	—	31.12.2022
ex39119099	57	Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)	0 %	—	31.12.2022
ex39119099	65	Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether	0 %	—	31.12.2023
ex39119099	86	Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)	0 %	—	31.12.2021
ex39121100	30	Cellulose triacetate (CAS RN 9012-09-3)	0 %	—	31.12.2021
ex39121100	40	Cellulose diacetate powder	0 %	—	31.12.2020
ex39123985	10	Ethylcellulose, not plasticized	0 %	—	31.12.2023
ex39123985	20	Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose	0 %	—	31.12.2023
ex39123985	30	Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms	0 %	—	31.12.2023
ex39123985	40	Hypromellose (INN) (CAS RN 9004-65-3)	0 %	—	31.12.2021
ex39123985	50	Polyquaternium 10 (CAS RN 68610-92-4)	0 %	—	31.12.2020
ex39129010	20	Hydroxypropyl methylcellulose phthalate	0 %	—	31.12.2023
ex39139000	30	Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350000	0 %	—	31.12.2023
ex39139000	85	Sterile sodium hyaluronate (CAS RN 9067-32-7)	0 %	—	31.12.2023
ex39139000	95	Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)	0 %	—	31.12.2023
ex39162000	91	Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:titanium dioxidepoly(methyl methacrylate)calcium carbonatebinding agents	0 %	—	31.12.2019
ex39169010	10	Rods with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene if present10 % or more but not more than 25 % of inorganic fillers	0 %	—	31.12.2023
ex39174000	91	Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses	0 %	—	31.12.2019
ex39191019ex39191080ex39199080	102531	Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	0 %	—	31.12.2023
ex39191080ex39199080	2720	Polyester film:coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, andon the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner	0 %	—	31.12.2019
ex39191080	35	Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	0 %	—	31.12.2023
ex39191080	37	Polytetrafluoroethylene film:with a thickness of 100 μm or more,an elongation at break of not more than 100 %,coated on one side with a pressure sensitive silicon adhesive	0 %	—	31.12.2020
ex39191080ex39199080	4043	Black poly(vinyl chloride) film:with a gloss of more than 30 degrees according to ASTM D2457,whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner	0 %	—	31.12.2022
ex39191080ex39199080	4326	Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner	0 %	—	31.12.2020
ex39191080ex39199080	4545	Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm	0 %	—	31.12.2022
ex39191080ex39199080ex39201089	504125	Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs	0 %	—	31.12.2023
ex39191080ex39199080	5553	Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90° of more than 25 N/cm (as determined by the ASTM D 3330 method)	0 %	—	31.12.2022
ex39191080ex39199080ex39206100	573030	Reflecting sheet:of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern,covered on one or both sides with one or more layers of plastic or metallisation, andwhether or not covered on one side with a self-adhesive layer and a release sheet	0 %	—	31.12.2023
ex39191080	63	Reflecting film consisting ofa layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,a layer of an acrylic resin having embedded glass beads,a layer of an acrylic resin hardened by a melamine cross-linking agent,a metal layer,an acrylic adhesive, anda release film	0 %	—	31.12.2020
ex39191080ex39199080	7075	Rolls of polyethylene foil:self-adhesive on one side,of a total thickness of 0,025 mm or more, but not more than 0,09 mm,of a total width of 60 mm or more, but not more than 1110 mm,of a kind used for the protection of the surface of products of headings 8521 or 8528	0 %	—	31.12.2021
ex39191080ex39199080	7350	Self-adhesive reflecting sheet whether or not in segmented pieces:whether or not containing a watermark,with or without an application tape coated on one side with an adhesive,the reflective sheet consists of:a layer of acrylic or vinyl polymer,a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,a layer of metallisation,an adhesive layer, anda release sheet,whether or not containing an additional layer of polyester	0 %	—	31.12.2023
ex39191080ex39199080	7580	Self-adhesive reflecting film, consisting of several layers including:a copolymer of acrylic resin,polyurethane,a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,glass microspheres, andan adhesive layer, with a release liner on one or both sides	0 %	—	31.12.2021
ex39191080ex39199080	8528	Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film:coated on one side with an acrylic UV-sensitive adhesive and a linerof a total thickness of 65 μm or more without release liner	0 %	—	31.12.2019
ex39199080	19	Transparent poly(ethylene terephthalate) self-adhesive film:free from impurities or faults,coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,with a total thickness without the liner of 54 μm or more but not more than 64 μm, anda width of more than 1295 mm but not more than 1305 mm	0 %	—	31.12.2023
ex39199080	21	Polytetrafluoroethylene film,with a thickness of 50 μm or more but not more than 155 μm,with a width of 6,30 mm or more but not more than 585 mm,an elongation at break of not more than 200 %, andcoated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 40 μm	0 %	—	31.12.2022
ex39199080	22	Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm	0 %	—	31.12.2019
ex39199080	23	Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner	0 %	—	31.12.2023
ex39199080	24	Reflecting laminated sheet:consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,covered on both sides with one or more layers of plastic material, andcovered on one side with an adhesive layer and a release sheet	0 %	—	31.12.2019
ex39199080	27	Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V	0 %	—	31.12.2019
ex39199080	33	Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm	0 %	—	31.12.2023
ex39199080	35	Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:a layer of polyurethane containing glass micro beads,a layer of poly(ethylene vinyl acetate),an adhesive layer, anda release sheet	0 %	—	31.12.2023
ex39199080	37	Polyethylene or polycarbonate film, cut into ready to use forms,one side partly printed whereby part of the printing either gives information about the meaning of LED′s visible at the unprinted areas, or marks those points which must be touched to operate the system,the other side partly covered with an adhesive layer,both sides covered with a release liner, andwith dimensions of not more than 14 cm × 2,5 cm,for use in the manufacture of push-button switches for mechatronic system adjustable furniture	0 %	—	31.12.2023
ex39199080	49	Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet	0 %	—	31.12.2023
ex39199080	51	Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet	0 %	—	31.12.2023
ex39199080	52	White polyolefin tape consisting of:an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm,a polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, anda non-silicone release layer with a thickness below 1 μm	0 %	—	31.12.2020
ex39199080	54	Poly(vinyl chloride) film, on one side covered witha polymer layeran adhesive layera release liner, on one side embossed, containing oblate spheres,whether or not on the other side covered with an adhesive layer and a metallised polymer layer	0 %	—	31.12.2019
ex39199080	63	Co-extruded trilayer film:each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,coated with an acrylic pressure sensitive adhesive, andwith a release liner,of an overall thickness of not more than 110 μm	0 %	—	31.12.2020
ex39199080	65	Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner	0 %	—	31.12.2020
ex39199080	70	Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad	0 %	—	31.12.2020
ex39199080	82	Reflecting film consisting of:a polyurethane layer,a glass microspheres layer,a metallised aluminium layer, andan adhesive, covered on one or both sides with a release liner,whether or not a poly(vinyl chloride) layer,a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use	0 %	—	31.12.2020
ex39199080ex90019000	8333	Reflector or diffuser sheets, in rolls:for protection against ultraviolet or infra-red heat radiation, to be affixed to windows, orfor equal transmission and distribution of light, intended for LCD modules	0 %	—	31.12.2022
ex39201025	20	Film of polyethylene, of a kind used for typewriter ribbon	0 %	—	31.12.2023
ex39201028	30	Printed embossed film:of polymers of ethylenehaving a gravity of 0,94 g/cm3 or moreof a thickness of 0,019 mm ± 0,003 mmwith permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more	0 %	—	31.12.2019
ex39201028	91	Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:is repetitive and equally spaced along the length of the filmis equally and visibly aligned when viewed from the back or front of the film	0 %	—	31.12.2023
ex39201040	40	Tubular layered film predominately of polyethylene:consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,having a total thickness of 55 μm or more,having a diameter of 500 mm or more but not more than 600 mm	0 %	—	31.12.2020
ex39201089	30	Ethylene vinyl acetate (EVA) film with:a raised relief surface with embossed undulations, anda thickness of more than 0,125 mm	0 %	—	31.12.2021
ex39201089	40	Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm	0 %	—	31.12.2021
ex39202021	40	Sheets of biaxially - oriented polypropylene film:with the thickness of not more than 0,1 mm,printed on both sides with specialised coatings to allow banknote security printing	0 %	—	31.12.2021
ex39202029	60	Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa, anda tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa,as determined by test method ASTM D882/ISO 527-3	0 %	—	31.12.2023
ex39202029	70	Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:a thickness of 55 μm or more but not more than 97 μm,a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, anda tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa	0 %	—	31.12.2019
ex39202029	94	Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 70 μm	0 %	—	31.12.2022
ex39204310	92	Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)	0 %	—	31.12.2023
ex39204310ex39204910	9493	Film of a specular gloss of 70 or more, measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 9403	0 %	—	31.12.2023
ex39204310	95	Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet	0 %	—	31.12.2023
ex39204910	30	Film of a (polyvinyl)chloride-copolymer:containing by weight 45 % or more of fillerson a support	0 %	—	31.12.2023
ex39205100	20	Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm	0 %	—	31.12.2023
ex39205100	30	Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm	0 %	—	31.12.2023
ex39205100	40	Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)	0 %	—	31.12.2023
ex39206219ex39206290	0510	Poly(ethylene terephthalate) film in rolls:with a thickness of 0,335 mm or more but not more than 0,365 mm, andcoated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm	0 %	—	31.12.2022
ex39206219	08	Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:only dyed in the mass, ordyed in the mass and metallised on one side	0 %	—	31.12.2023
ex39206219	12	Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0 %	—	31.12.2023
ex39206219	18	Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0 %	—	31.12.2023
ex39206219	20	Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers	0 %	—	31.12.2023
ex39206219	38	Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm	0 %	—	31.12.2023
ex39206219	48	Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)	0 %	—	31.12.2020
ex39206219	52	Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method)	0 %	—	31.12.2023
ex39206219	60	Poly(ethylene terephthalate) film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm	0 %	—	31.12.2022
ex39206219	76	Transparent poly(ethylene terephthalate) film:coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,with a light transmission of more than 93 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm	0 %	—	31.12.2023
ex39206900	20	Film of poly(ethylene naphthalene-2,6-dicarboxylate)	0 %	—	31.12.2023
ex39206900	50	Monolayer, biaxially oriented film:composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,having a thickness of 20 μm or more but not more than 120 μm,biodegradable and compostable (as determined by the method EN 13432)	0 %	—	31.12.2019
ex39206900	60	Monolayer, transverse oriented, shrink film:composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),having a thickness of 45 μm or more but not more than 50 μm,biodegradable and compostable (as determined by the method EN 13432)	0 %	—	31.12.2019
ex39207910	10	Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm	0 %	p/st	31.12.2019
ex39209100	51	Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticiser	0 %	—	31.12.2019
ex39209100	52	Poly(vinyl butyral) film:containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,with a thickness of 0,73 mm or more but not more than 1,50 mm	0 %	—	31.12.2019
ex39209100	91	Poly(vinyl butyral) film having a graduated coloured band	3 %	—	31.12.2023
ex39209100	93	Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm	0 %	—	31.12.2019
ex39209100	95	Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser	0 %	—	31.12.2023
ex39209928	40	Polymer film containing the following monomers:poly (tetramethylene ether glycol),bis (4-isocyanotocyclohexyl) methane,1,4-butanediol or 1,3-butanediol,with a thickness of 0,25 mm or more but not more than 5,0 mm,embossed with a regular pattern on one surface, andcovered with a release sheet	0 %	—	31.12.2023
ex39209928	45	Transparent polyurethane film metallised on one side:with a gloss of more than 90 degrees according to ASTM D2457covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymercovered on the other side with a protective poly(ethylene terephthalate) filmwith a total thickness of more than 204 μm but not more than 244 μm	0 %	—	31.12.2019
ex39209928	50	Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film	0 %	—	31.12.2021
ex39209928	65	Matt, thermoplastic polyurethane foil in rolls with:a width of 1640 mm (± 10 mm),a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),a thickness of more than 365 μm but not more than 760 μm,a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),an elongation to break of 470 % (as determined by the method: EN ISO 527)	0 %	m2	31.12.2019
ex39209928	70	Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:microspheres with a coating of metal, whether or not alloyed with gold,an adhesive layer,with a protective layer of silicone or poly(ethylene terephthalate) on one side,with a protective layer of poly(ethylene terephthalate) on the other side, andwith a width of 5 cm or more but not more than 100 cm,with a length of not more than 2000 m	0 %	—	31.12.2021
ex39209928	75	Thermoplastic polyurethane foil in rolls with:a width of more than 900 mm but not more than 1016 mm,a matt finish,a thickness of 0,43 mm (± 0,03 mm),an elongation to break of 420 % or more but not more than 520 %,a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),wrinkle inside (waves) of 6,35 mm,a flatness of 0,025 mm	0 %	m2	31.12.2019
ex39209959	25	Poly(1-chlorotrifluoroethylene) film	0 %	—	31.12.2023
ex39209959	55	Ion-exchange membranes of fluorinated plastic material	0 %	—	31.12.2023
ex39209959	65	Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %	0 %	—	31.12.2023
ex39209959	70	Tetrafluoroethylene film, put up in rolls, with:a thickness of 50 μm,a melting point of 260 °C, anda specific gravity of 1,75 (ASTM D792),for use in the manufacture of semiconductor devices	0 %	—	31.12.2021
ex39209959	75	Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with:a thickness of 0,010 mm or more but not more than 0,80 mm,a width of 1219 mm or more but not more than 1575 mm, anda melting point of 252 °C (measured according ASTM D-3418)	0 %	—	31.12.2023
ex39209990	20	Anisotropic conductive film, in rolls, of a width of 1,2 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays	0 %	—	31.12.2023
ex39211310	10	Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092	0 %	m3	31.12.2019
ex39211310	20	Rolls of open-cell polyurethane foam:with a thickness of 2,29 mm (± 0,25 mm),surface-treated with a foraminous adhesion promoter, andlaminated to a polyester film and a layer of textile material	0 %	—	31.12.2022
ex39211900	30	Blocks with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene if present10 % or more but not more than 25 % of inorganic fillers	0 %	—	31.12.2023
ex39211900	35	Multilayer film consisting of:30 % or more but not more than 60 % of a microporous polypropylene layer (CAS RN 9003 07-0),20 % or more but not more than 40 % of a microporous polyethylene layer (CAS RN 9002-88-4), and20 % or more but not more than 40 % of a boehmite layer/coating (CAS RN 1318-23-6),for use in the manufacture of lithium-ion batteries	0 %	—	31.12.2022
ex39211900	40	Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:a width of 98 mm or more but not more than 170 mm,a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators	0 %	—	31.12.2020
ex39211900	50	Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:a total thickness of more than 0,05 mm but not more than 0,20 mm,a water entry pressure between 5 and 200 kPa according to ISO 811, andan air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5	0 %	—	31.12.2021
ex39211900	60	Multi-porous multilayer separator foil with:one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,a width of 65 mm or more but not more than 170 mm,a total thickness of 0,01 mm or more but not more than 0,03 mm,a porosity of 0,25 or more but not more than 0,65	0 %	m2	31.12.2022
ex39211900	70	Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having:a width of 1600 mm or more but not more than 1730 mm, anda membrane thickness of 15 μm or more, but not more than 50 μm,for use in the manufacture of a bi-component ePTFE membrane	0 %	—	31.12.2022
ex39211900	80	Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:zero transversal production direction (TD) shrinkage,a total thickness of 10 μm or more but not more than 50 μm,a width of 15 mm or more but not more than 900 mm,a length of more than 200 m but not more than 3000 m, andan average pore size between 0,02 μm and 0,1 μm	0 %	—	31.12.2022
ex39211900	93	Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment	0 %	—	31.12.2023
ex39211900	95	Film of polyethersulfone, of a thickness of not more than 200 μm	0 %	—	31.12.2023
ex39219010	10	Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres	0 %	—	31.12.2023
ex39219010	20	Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin	0 %	—	31.12.2023
ex39219010	30	Multilayer film consisting of:a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm	0 %	m2	31.12.2023
ex39219055ex70194000ex70194000	252129	Prepreg sheets or rolls containing polyimide resin	0 %	—	31.12.2019
ex39219055	35	Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards	0 %	m2	31.12.2023
ex39219055	40	Three layered fabric sheet, in rolls:comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,coated on both sides with polyamide,of a total thickness not more than 135 μm,of a total weight not more than 80 g/m2	0 %	—	31.12.2020
ex39219055	50	Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems	0 %	m2	31.12.2020
ex39219060	30	Heat-, infra- and UV insulating poly(vinyl butyral) film:laminated with a metal layer with a thickness of 0,05 mm (± 0,01 mm),containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticiser,with a light transmission of 70 % or more (as determined by the ISO 9050 standard),with an UV transmission of 1 % or less (as determined by the ISO 9050 standard),with a total thickness of 0,43 mm (± 0,043 mm)	0 %	m2	31.12.2019
ex39219060ex54077100ex59039099	353030	Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells	0 %	—	31.12.2023
ex39231090	10	Photomask or wafer compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage, andwith or without a gasket seal,of a kind used in the photolithography or other semiconductor production to house photomasks or wafers	0 %	—	31.12.2021
ex39263000	20	Plastic logo of the automobile manufacturer with mounting brackets on the back side, whether or not chromed, for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
ex39263000ex39269097	3034	Electroplated interior or exterior decorative parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,layers of copper, nickel and chromium,for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705	0 %	p/st	31.12.2022
ex39269092	20	Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material	0 %	—	31.12.2023
ex39269092	30	Silicone shell for breast implant	0 %	—	31.12.2021
ex39269097	10	Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm	0 %	—	31.12.2023
ex39269097	15	Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems	0 %	—	31.12.2023
ex39269097	23	Plastic cover with clips for the exterior rear-view mirror of motor vehicles	0 %	p/st	31.12.2020
ex39269097	25	Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm	0 %	—	31.12.2023
ex39269097	27	Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror	0 %	—	31.12.2023
ex39269097	30	Parts of car radio and car air-conditioner front panels:of acrylonitrile-butadiene-styrene with or without polycarbonate,coated with a copper, a nickel and a chrome layers,with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm	0 %	—	31.12.2021
ex39269097	33	Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls	0 %	p/st	31.12.2019
ex39269097	50	Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces	0 %	p/st	31.12.2023
ex39269097	77	Silicone decoupling ring with an inner diameter of 14,7 mm or more but no more than 16,0 mm, in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems	0 %	p/st	31.12.2021
ex40070000	10	Siliconated vulcanised rubber thread and cord	0 %	—	31.12.2023
ex40094200	20	Rubber brake hose with:textile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,of kind used in the manufacture of goods of Chapter 87	0 %	—	31.12.2020
ex40103100ex40103300ex40103900	101010	Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
ex40169300	20	Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mold split of not more than 0,25 mm, in the shape of a rectangle:with a length of 72 mm or more but not more than 825 mm;with a width of 18 mm or more but not more than 155 mm	0 %	—	31.12.2020
ex40169957	10	Air intake hose for air supply to the combustion part of the engine comprising at least:one flexible rubber hose,one plastic hose, andmetal clips,whether or not a resonator,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex40169957	20	Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex40169957	30	Pin boot of a brake calliper made of vulcanized rubber with:an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,a height of 15 mm or more, but not more than 40 mm, anda ribbed design,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2022
ex40169997	30	Tyre moulding bladder	0 %	—	31.12.2021
ex41044119	10	Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry	0 %	—	31.12.2022
4105100041053090		Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114	0 %	—	31.12.2023
4106210041062290		Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114	0 %	—	31.12.2023
41063100410632004106409041069200		Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114	0 %	—	31.12.2023
ex44083930	10	Okoume veneer sheets:of a length of 1270 mm or more, but not more than 3200 mm,of a width of 150 mm or more, but not more than 2000 mm,of a thickness of 0,5 mm or more, but not more than 4 mm,not sanded, andnot planed	0 %	—	31.12.2023
ex44129940ex44129950ex44129985	101020	Laminated wood consisting of two layers of sheets for veneering:a width of 210 mm or more but not more than 320 mm,a length of 297 mm or more but not more than 450 mm,a thickness or 0,45 mm or more but not more than 0,8 mm,for use in the manufacture of products falling within heading 4420, 4421, 4820, 4909 or 4911	0 %	—	31.12.2021
ex50040010	10	Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk	0 %	—	31.12.2021
ex50050010ex50050090	1010	Yarn spun entirely from silk waste (noil), not put up for retail sale	0 %	—	31.12.2023
52081110		Fabrics for the manufacture of bandages, dressings and medical gauzes	5.2 %	—	31.12.2023
ex53110090	10	Plain-woven fabric of paper yarns glued on a tissue paper layer:with a weight of 230 g/m2 or more but not more than 280 g/m2, andcut into rectangles with a side length of 40 cm or more but not more than 140 cm	0 %	—	31.12.2022
ex53110090	20	Sisal cloth in rolls with:a length of 20 metres or more but not more than 30 metres, anda maximum width of 2,5 metres,for use in the production of Stainless Steel Kitchenware	0 %	—	31.12.2023
ex54024700	20	Bicomponent monofilament yarn of not more than 30 dtex, consisting of:a poly(ethylene terephthalate) core, andan outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),for use in the manufacture of filtration fabrics	0 %	—	31.12.2020
ex54024900	30	Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures	0 %	—	31.12.2023
ex54024900	50	Non-textured filament yarn of poly(vinyl alcohol)	0 %	—	31.12.2023
ex54024900	70	Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn	0 %	m	31.12.2023
ex54033900	10	Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry	0 %	—	31.12.2020
ex54041900	50	Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers	0 %	—	31.12.2023
ex54049090	20	Strip of polyimide	0 %	—	31.12.2023
ex54071000	10	Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine)	0 %	—	31.12.2022
ex55031100ex56013000	1040	Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length of not more than 7 mm	0 %	—	31.12.2023
ex55039000ex55069000ex56013000	201010	Poly(vinyl alcohol) fibres, whether or not acetalized	0 %	—	31.12.2023
ex55039000	30	Trilobal poly(thio-1,4-phenylene) fibres	0 %	—	31.12.2019
ex56031110ex56031190ex56031210ex56031290ex56039110ex56039190ex56039210ex56039290	1010101010101010	Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:of a thickness of 200 μm or more but not more than 280 μm, andof a weight of 20 g/m2 or more but not more than 50 g/m2	0 %	m2	31.12.2023
ex56031290ex56031390ex56031490ex56039290ex56039390ex56039490	303010604030	Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles	0 %	—	31.12.2023
ex56031290	50	Non-woven:weighing 30 g/m2 or more, but not more than 60 g/m2,containing fibres of polypropylene or of polypropylene and polyethylene,whether or not printed, with:on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded, andon other side a smooth untextured surface,for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles	0 %	m2	31.12.2022
ex56031290ex56031390	6060	Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)	0 %	m2	31.12.2023
ex56031290ex56031390ex56039290ex56039390	70704010	Non-wovens of polypropylene:with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,with a weight of not more than 150 g/m2,in the piece or simply cut into squares or rectangles, andnot impregnated	0 %	m2	31.12.2023
ex56031310	20	Non-woven of spunbonded polyethylene, with a coating,of a weight of more than 80 g/m2 but not more than 105 g/m2, andan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)	0 %	m2	31.12.2020
ex56031490	40	Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2,whether or not laminated on one side with a membrane or a membrane and aluminium,of a kind used for the manufacture of industrial filters	0 %	m2	31.12.2023
ex56039290ex56039390	2020	Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene	0 %	—	31.12.2023
ex56039290ex56039490	7040	Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene	0 %	—	31.12.2023
ex56039290ex56039390	8050	Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch properties,for use in the manufacture of infant/child care products	0 %	m2	31.12.2021
ex56039390	60	Nonwovens made of polyester fibres:with a weight of 85 g/m2,with a constant thickness of 95 μm (± 5 μm),neither coated nor covered,in 1 m wide rolls of 2000m to 5000 m length,suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters	0 %	m2	31.12.2023
ex56039490	20	Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips	0 %	—	31.12.2023
ex56075090	10	Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures	0 %	—	31.12.2019
ex58030010	91	Gauze of cotton, of a width of less than 1500 mm	0 %	—	31.12.2023
ex59032090	20	Two layers′ plastic-laminated textile fabric with:one layer consisting of knitted or crocheted polyester textile fabric,other layer consisting of polyurethane foam,a weight of 150 g/m2 or more, but not more than 500 g/m2,a thickness of 1 mm or more, but not more than 5 mm,for use in the manufacture of the retractable roof of motor vehicles	0 %	—	31.12.2021
ex59069990	10	Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine)	0 %	—	31.12.2023
ex59070000	10	Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm	0 %	—	31.12.2021
ex59119099ex84219990	3092	Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more	0 %	—	31.12.2023
ex59119099	40	Multi-layered non-woven polyester polishing pads, impregnated with polyurethane	0 %	—	31.12.2019
ex59119099	50	Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers	0 %	—	31.12.2022
ex68042100	20	Discs:of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,having a self-sharpening effect by constant release of the diamonds,suitable for abrasive cutting of wafers,whether or not containing a hole in the centre,whether or not on a support,with a weight of not more than 377 g per piece, andwith an external diameter of not more than 206 mm	0 %	p/st	31.12.2019
ex68053000	10	Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors	0 %	—	31.12.2021
ex68138900	20	Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components	0 %	—	31.12.2023
ex68141000	10	Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres	0 %	—	31.12.2023
ex69039090	20	Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials	0 %	—	31.12.2023
ex69091900	20	Silicon nitride (Si3N4) rollers or balls	0 %	—	31.12.2020
ex69091900	25	Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide	0 %	—	31.12.2023
ex69091900	30	Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end	0 %	—	31.12.2023
ex69091900ex69149000	5020	Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:2 % or more of diboron trioxide,28 % or less of silicon dioxide, and60 % or more of dialuminium trioxide	0 %	—	31.12.2023
ex69091900	60	Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end	0 %	—	31.12.2023
ex69091900	70	Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section	0 %	—	31.12.2023
ex69149000	30	Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm	0 %	—	31.12.2019
ex70049080	10	Alkali-aluminosilicate drawn flat glass sheet with:a scratch proof coating of a thickness of 45 μm (+/– 5 μm),a total thickness of 0,45 mm or more but not more than 1,1 mm,a width of 300 mm or more but not more than 3210 mm,a length of 300 mm or more but not more than 2000 mm,a visible light transmission of 90 % or more,an optical distortion of 55° or more	0 %	—	31.12.2020
ex70060090	25	Glass wafer made of borosilicate float glasswith a total thickness variation of 1 μm or less, andlaser-engraved	0 %	p/st	31.12.2019
ex70091000	30	Layered glass with mechanical dimming ability by different angles of incident light comprising:whether or not a layer of chrome,a break-resistance adhesive tape or hot-melt adhesive, anda release film on the front side and protective paper at the back side,of a kind used for interior rear-view mirrors of vehicles	0 %	p/st	31.12.2019
ex70091000	40	Electrochromic self-dimming inside rear-view mirror, consisting of:a mirror supporta plastic casing, andan integrated circuit,for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2020
ex70091000	50	Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors:whether or not equipped with plastic backing plate,whether or not equipped with a heating element,whether or not equipped with Blind Spot Module (BSM) display	0 %	—	31.12.2022
ex70099100	10	Unframed glass mirrors with:a length of 1516 mm (± 1 mm);a width of 553 mm (± 1 mm);a thickness of 3 mm (± 0,1 mm);the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm;a lead content of not more than 90 mg/kg; anda corrosion resistance of 72 hours or more according to ISO 9227 salt spray test	0 %	p/st	31.12.2020
ex70140000	10	Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware	0 %	—	31.12.2023
ex70191200ex70191200	0222	Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials	0 %	—	31.12.2023
ex70191200ex70191200	0525	Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)	0 %	—	31.12.2022
ex70191910	10	Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers	0 %	—	31.12.2023
ex70191910	15	S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm / + 1,5 μm)	0 %	—	31.12.2022
ex70191910	20	Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate	0 %	—	31.12.2020
ex70191910	25	Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate	0 %	—	31.12.2020
ex70191910	30	Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate	0 %	—	31.12.2019
ex70191910	50	Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated	0 %	—	31.12.2022
ex70191910	55	Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:9 % or more but not more than 16 % of magnesium oxide,19 % or more but not more than 25 % of aluminium oxide,0 % or more but not more than 2 % of boron oxide,without calcium oxide,coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene	0 %	—	31.12.2019
ex70191910ex70199000	6030	High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)	0 %	—	31.12.2023
ex70191910ex70199000	7020	Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)	0 %	—	31.12.2023
ex70191910ex70199000	8040	Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene	0 %	—	31.12.2019
ex70193900	50	Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts	0 %	—	31.12.2021
ex70194000ex70194000	1119	Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of:10 ppm per °C or more but not more than 12 ppm per °C in the length and width, and20 ppm per °C or more but not more than 30 ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)	0 %	—	31.12.2023
ex70199000	10	Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate	0 %	—	31.12.2023
ex70200010ex76169990	1077	Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body	0 %	p/st	31.12.2021
ex70200010	20	Raw material for optical elements of fused silicon dioxide with:a thickness of 10 cm or more but not more than 40 cm, anda weight of 100 kg or more	0 %	p/st	31.12.2022
ex72011011	10	Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm	0 %	—	31.12.2021
ex72011030	10	Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon	0 %	—	31.12.2021
72025000		Ferro-silico-chromium	0 %	—	31.12.2023
ex72029980	10	Ferro-dysprosium, containing by weight:78 % or more of dysprosium, and18 % or more but not more than 22 % of iron	0 %	—	31.12.2020
ex73151190	10	Roller type steel timing chain with a fatigue limit of 2 kN at 7000 rpm or more for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2022
ex73181900	30	Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex73182400	30	Restraint joint elements:of martensitic stainless steel according to specification 17-4PH,injection moulded,with a rockwell hardness of 38 (± 1) or 53 (+ 2/– 1),measuring 9 mm × 5,5 mm × 6,5 mm or more, but not more than 35 mm × 17 mm × 8 mm,of a kind used for restraint joints for tubes and pipes	0 %	—	31.12.2023
ex73209010	91	Flat spiral spring of tempered steel, with:a thickness of 2,67 mm or more, but not more than 4,11 mm,a width of 12,57 mm or more, but not more than 16,01 mm,a torque of 18,05 Nm or more, but not more than 73,5 Nm,an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°,for use in the manufacture of tensioners for power transmission belts, for internal combustion engines	0 %	p/st	31.12.2023
ex73259910	20	Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors	0 %	p/st	31.12.2019
ex73262000	20	Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling	0 %	—	31.12.2021
ex73269092	40	Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with:a diameter of 5752 mm or more but not more than 5758 mm,a height of 3452 mm or more but not more than 3454 mm,a total weight 167875 kg or more but not more than 168125 kg,of a kind used for the fabrication of a nuclear reactor vessel	0 %	p/st	31.12.2022
ex73269098	40	Iron and steel weightswhether or not with parts of other materialwhether or not with parts of other metalswhether or not surface treatedwhether or not printedof a kind used for the production of remote controls	0 %	—	31.12.2020
ex73269098	50	Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:with a chrome coating,of a diameter of 11 mm or more, but not more than 28 mm,of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding	0 %	—	31.12.2022
ex74091900ex74102100	1070	Plates or sheets:with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,and containing at least one of the following:poly(tetrafluoroethylene) (CAS RN 9002-84-0),poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4),epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height,for use in the manufacture of circuit boards	0 %	—	31.12.2022
ex74101100ex85079080ex85459090	106030	Roll of laminate foil of graphite and copper, with:a width of 610 mm or more but not more than 620 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric rechargeable batteries	0 %	—	31.12.2021
ex74102100	10	Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil	0 %	—	31.12.2023
ex74102100	20	Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards	0 %	m2	31.12.2023
ex74102100	30	Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil	0 %	—	31.12.2023
ex74102100	40	Sheet or plates:consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, orconsisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm	0 %	—	31.12.2023
ex74102100	50	Plates:consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,covered on one or both sides with copper foilwith a thickness of not more than 0,15mm, andwith a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-650	0 %	—	31.12.2023
ex74130000ex85189000	2045	Loudspeaker centering ring, consisting of one or more vibration dampers and minimum 2 non-insulated copper cables, therein woven or pressed of the kind used in car loudspeakers	0 %	—	31.12.2022
ex74199990ex76169990	9160	Disc (target) with deposition material, consisting of molybdenum silicide:containing 1 mg/kg or less of sodium, andmounted on a copper or aluminium support	0 %	—	31.12.2023
76012020		Slabs and billets of unwrought aluminium alloys	4 %	—	31.12.2023
ex76012020	10	Slabs and billets of aluminium alloy containing lithium	0 %	—	31.12.2022
ex76042910ex76061299	1020	Sheets and bars of aluminium-lithium alloys	0 %	—	31.12.2020
ex76042910	40	Bars and rods of aluminium alloys containing by weight:0,25 % or more but not more than 7 % of zinc, and1 % or more but not more than 3 % of magnesium, and1 % or more but not more than 5 % of copper, andnot more than 1 % of manganese,consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process	0 %	—	31.12.2019
ex76051900	10	Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm	0 %	—	31.12.2023
ex76052900	10	Wire of aluminium alloys containing by weight:0,10 % or more but not more than 5 % of copper, and0,2 % or more but not more than 6 % of magnesium, and0,10 % or more but not more than 7 % of zinc, andnot more than 1 % of manganese,consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process	0 %	m	31.12.2019
ex76071190ex76071190	4757	Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %	0 %	—	31.12.2021
ex76071190	60	Plain aluminium foil with the following parameters:an aluminium content of 99,98 % or morea thickness of 0,070 mm or more but not more than 0,125 mmwith a cubic textureof a kind used for high voltage etching	0 %	—	31.12.2021
ex76071990ex85079080	1080	Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:a width of 595 mm or more but not more than 605 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries	0 %	—	31.12.2021
ex76082089	30	Seamless aluminium alloyed extruded tubes with:an outer diameter of 60 mm or more but not more than 420 mm, anda wall thickness of 10 mm or more but not more than 80 mm	0 %	—	31.12.2023
ex76130000	20	Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg	0 %	p/st	31.12.2023
ex76169910ex87089910ex87089997	306050	Aluminium engine bracket, with dimensions of:height of more than 10 mm but not more than 200 mm,width of more than 10 mm but not more than 200 mm,length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:internal porosity not more than 1 mm,outer porosity not more than 2 mm,Rockwell hardness HRB 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles	0 %	p/st	31.12.2019
ex76169990	15	Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts	0 %	p/st	31.12.2023
ex76169990	25	Metallised film:consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,with an optical density of each aluminium layer of not more than 3,0,with each aluminium layer separated by a resin layer,on a carrier film of PET, andon rolls of up to 50000 metres in length	0 %	—	31.12.2019
ex76169990ex84828000ex88033000	701040	Connecting components for use in the production of helicopter tail rotor shafts	0 %	p/st	31.12.2021
ex81019600	10	Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μma resistance of 40 Ohm or more but not more than 300 Ohm at length of 1 metreof a kind used in the production of heated car front windows	0 %	—	31.12.2020
ex81019600	20	Tungsten wirecontaining by weight 99,95 % or more of tungsten, andwith a maximum cross-sectional dimension of not more than 1,02 mm	0 %	—	31.12.2022
ex81021000	10	Molybdenum powder with:a purity by weight of 99 % or more, anda particle size of 1,0 μm or more, but not more than 5,0 μm	0 %	—	31.12.2022
ex81039090	10	Tantalum sputtering target with:a copper-chromium alloy backing plate,a diameter of 312 mm, anda thickness of 6,3 mm	0 %	p/st	31.12.2019
ex81043000	35	Magnesium powderof purity by weight of more than 99,5 %with a particle size of 0,2 mm or more but not more than 0,8 mm	0 %	—	31.12.2020
ex81049000	10	Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light	0 %	—	31.12.2023
ex81059000	10	Bars or wires made of cobalt alloy containing, by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium, and7 % (± 2 %) iron,conforming to the material specifications AMS 5842, of a kind used in the aerospace industry	0 %	—	31.12.2023
ex81082000	10	Titanium sponge	0 %	—	31.12.2023
ex81082000	30	Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm	0 %	—	31.12.2023
ex81082000	40	Titanium alloy ingot,with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 6 % of aluminium,2,5 % or more but not more than 5 % of tin,2,5 % or more but not more than 4,5 % of zirconium,0,2 % or more but not more than 1 % of niobium,0,1 % or more but not more than 1 % of molybdenum,0,1 % or more but not more than 0,5 % of silicon	0 %	—	31.12.2020
ex81082000	55	Titanium alloy ingot:with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more but not more than 7 % of aluminium,1 % or more but not more than 5 % of tin,3 % or more but not more than 5 % of zirconium,4 % or more but not more than 8 % of molybdenum	0 %	p/st	31.12.2020
ex81082000	60	Titanium alloy ingot:with a diameter of 63,5 cm or more and a length of 450 cm or more,a weight of 6350 kg or more,containing alloy elements by weight of:5,5 % or more but not more than 6,7 % of aluminium,3,7 % of more but not more than 4,9 % of vanadium	0 %	—	31.12.2020
ex81082000	70	Titanium alloy slab, with:a height of 20,3 cm or more, but not more than 23,3 cm,a length of 246,1 cm or more, but not more than 289,6 cm,a width of 40,6 cm or more, but not more than 46,7 cm,a weight of 820 kg or more but not more than 965 kg,containing alloy elements by weight of:5,2 % or more but not more than 6,2 % of aluminium,2,5 % or more but not more than 4,8 % of vanadium	0 %	p/st	31.12.2022
ex81083000	10	Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium	0 %	—	31.12.2023
ex81089030	10	Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040	0 %	—	31.12.2019
ex81089030	15	Rods and wire of an alloy of titanium with:a uniform solid cross-section in the form of a cylinder,with a diameter of 0,8 mm or more, but not more than 5 mm,an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,a silicon content by weight of 0,3 % or more, but not more than 0,6 %,a niobium content by weight of 0,1 or more, but not more than 0,3 %, andan iron content by weight of not more than 0,2 %	0 %	—	31.12.2022
ex81089030	25	Titanium-aluminium-vanadium alloy (TiAl6V4) bars, rods and wire, complying with AMS standards 4928, 4965 or 4967	0 %	—	31.12.2020
ex81089030	60	Forged cylindrical bars of titanium with:a purity of 99,995 % by weight or more,a diameter of 140 mm or more but not more than 200 mm,a weight of 5 kg or more but not more than 300 kg	0 %	—	31.12.2021
ex81089030	70	Wire of an titanium alloy containing by weight:22 % (± 1 %) of vanadium, and4 % (± 0,5 %) of aluminium,or15 % (± 1 %) of vanadium,3 % (± 0,5 %) of chromium,3 % (± 0,5 % of tin, and3 % (± 0,5 %) of aluminium	0 %	—	31.12.2021
ex81089050	45	Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:a thickness of 0,4 mm or more, but not more than 100 mm,a length of not more than 14 m, anda width of not more than 4 m	0 %	—	31.12.2022
ex81089050	55	Plates, sheets, strip and foil of an alloy of titanium	0 %	—	31.12.2021
ex81089050	80	Plates, sheets, strips and foil of non-alloyed titaniumof a width of more than 750 mmof a thickness of not more than 3 mm	0 %	—	31.12.2019
ex81089050	85	Strip or foil of non-alloyed titanium:containing more than 0,07 % by weight of oxygen (O2),of a thickness of 0,4 mm or more but not more than 2,5 mm,conforming to the Vickers hardness HV1 standard of not more than 170,of a kind used in the manufacture of welded tubes for nuclear power plant condensers	0 %	—	31.12.2019
ex81089060	30	Seamless tubes and pipes of titanium or an alloy of titanium with:a diameter of 19 mm or more but not more than 159 mm,a wall thickness of 0,4 mm or more but not more than 8 mm, anda maximum length of 18 m	0 %	—	31.12.2022
ex81089090ex90039000	3020	Parts of spectacle frames and mountings, including:temples,blanks of a kind used for the manufacture of spectacle parts, andbolts of the kind used for spectacle frames and mountings,of a titanium alloy	0 %	p/st	31.12.2021
ex81092000	10	Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry	0 %	—	31.12.2023
ex81101000	10	Antimony in the form of ingots	0 %	—	31.12.2023
ex81129930	10	Alloy of niobium (columbium) and titanium, in the form of bars and rods	0 %	—	31.12.2023
ex81130020	10	Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide	0 %	—	31.12.2023
ex81130090	10	Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits	0 %	—	31.12.2022
ex81130090	20	Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules	0 %	—	31.12.2020
ex82071910	10	Inserts for drilling tools with working parts of agglomerated diamonds	0 %	p/st	31.12.2019
ex82073010	10	Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles	0 %	p/st	31.12.2022
ex83016000ex84139100ex84199085ex84389000ex84689000ex84769090ex84799070ex84819000ex85030099ex85159080ex85369095ex85371098ex87089120ex87089199ex87089910ex87089997	20403020202083307030957010205040	Keypads of silicone or plastic,whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,whether or not printed or surface treated,whether or not with electrical conducting elements,whether or not with keypads foil glued on the keyboard,whether or not with protective foil,single or multilayer	0 %	p/st	31.12.2020
ex83022000	20	Castors, withan external diameter of 21 mm or more but not more than 23 mm,a width with screw of 19 mm or more but not more than 23 mm,a U-shaped plastic outer ring,an assembly screw fitted to the internal diameter and used as an inner ring	0 %	p/st	31.12.2020
ex83099090	10	Aluminium can ends:with a diameter of 99,00 mm or more but not more than 136,5 mm (±1mm),whether or not with a "ring-pull" aperture	0 %	p/st	31.12.2023
ex84013000	20	Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors	0 %	—	31.12.2023
ex84014000	10	Stainless steel absorber control rods, filled with neutron absorbing chemical elements	0 %	p/st	31.12.2019
ex84059000ex87082110ex87082190	101010	Metal casing for automobile safety belt pre-tension gas generators	0 %	p/st	31.12.2019
ex84073320ex84073380ex84079080ex84079090	10101010	Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of subheading 84331190,tractors of subheading 87019190, whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010, orsnowploughs and snow blowers of subheading 843020	0 %	—	31.12.2022
ex84079010	10	Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508	0 %	—	31.12.2021
ex84079090	20	Compact Liquid Petroleum Gas (LPG) Engine System, with:6 cylinders,an output of 75 kW or more, but not more than 80 kW,inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 8427	0 %	—	31.12.2020
ex84089041	20	Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems	0 %	—	31.12.2023
ex84089043	20	Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems	0 %	—	31.12.2023
ex84089043ex84089045ex84089047	403050	4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:a capacity of not more than 3850 cm3, anda rated output of 15 kW or more but not more than 85 kW,for use in the manufacture of vehicles of heading 8427	0 %	—	31.12.2022
ex84099100	40	Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles	0 %	—	31.12.2021
ex84099100ex84099900	5055	Exhaust manifold with turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm	0 %	p/st	31.12.2023
ex84099900ex84799070	1085	Injectors with solenoid valve for optimised atomisation in the engine combustion chamber	0 %	p/st	31.12.2021
ex84099900	40	Plastic or aluminum cylinder head cover with:a camshaft position sensor (CMPS),metal brackets for mounting on an engine, andtwo or more gaskets,for use in the manufacture of engines of motor vehicles	0 %	p/st	31.12.2021
ex84099900	60	Intake manifold for air supply to the engine cylinders, comprising at least:a throttle,a boost pressure sensor,for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2022
ex84099900	70	Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2021
ex84099900	80	High pressure oil jet nozzle for engine piston cooling and lubrication with:an opening pressure of 1 bar or more, but not more than 3 bar,a closing pressure of more than 0,7 bar,a one-way valve,for use in the manufacture of compression ignition engines of motor vehicles	0 %	—	31.12.2022
ex84119900	20	Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,with a heat-resistance of not more than 1100 °C,with a diameter of 28 mm or more, but not more than 180 mm,with a height of 20 mm or more, but not more than 150 mm	0 %	p/st	31.12.2022
ex84119900	30	Turbine housing of turbochargers with:a heat-resistance of not more than 1050 °C, anda hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm	0 %	p/st	31.12.2021
ex84119900ex84123900	8020	Actuator for a single-stage turbocharger:whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm,with a length of not more than 350 mm,with a diameter of not more than 75 mm,with a height of not more than 110 mm	0 %	p/st	31.12.2023
ex84133020	30	Single-cylinder radial-piston high pressure pump for gasoline direct injection with:an operating pressure of 200 bar or more, but not more than 350 bar,a flow control, anda pressure relief valve,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2021
ex84137035	20	Single phase centrifugal pump:discharging at least 400 cm3 fluid per minute,with a noise level limited to 6 dBA,with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, andworking at ambient temperatures down to – 10 °C	0 %	—	31.12.2020
ex84139100	30	Fuel pump cover:consisting of aluminum alloys,with a diameter of 38 mm or 50 mm,with two concentric, annular grooves formed on its surface,anodized,of a kind used in motor vehicles with petrol engines	0 %	p/st	31.12.2019
ex84143081	50	Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment	0 %	—	31.12.2019
ex84143081ex84148073	6030	Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants:driven by "on-off" single phase alternate current (AC) or "brushless direct current" (BLDC) variable speed motorswith a nominal power rating of not more than 1,5 kWof a kind used in the production of household heat pump laundry tumble dryers	0 %	—	31.12.2023
ex84143089	20	Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW	0 %	—	31.12.2023
ex84145925	40	Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 8528	0 %	—	31.12.2020
ex84148022ex84148080	2020	Air membrane compressor with:a flow of 4,5 l/min or more, but not more than 7 l/min,power input of not more than 8,1 W, anda gauge pressure capacity not exceeding 400 hPa (0,4 bar),of a kind used in the production of motor vehicle seats	0 %	—	31.12.2022
ex84149000	20	Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2019
ex84149000	30	Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2023
ex84149000	40	Drive part, for compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2023
ex84159000	30	Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with:a length of 166 mm (+/– 1 mm),a diameter of 70 mm (+/– 1 mm),an internal capacity of 280 cm3 or more,a water absorption rate of 17 g or more, andan internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2,of a kind used in car air-conditioning systems	0 %	p/st	31.12.2020
ex84159000	40	Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems	0 %	p/st	31.12.2020
ex84159000	55	Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with:a length of 143 mm or more but not more than 292 mm,a diameter of 31 mm or more but not more than 99 mm,a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, anda solid particle diameter of not more than 0,06 mm,of a kind used in car air-conditioning systems	0 %	p/st	31.12.2020
ex84189910	50	Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment	0 %	p/st	31.12.2019
ex84189910	60	Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment	0 %	p/st	31.12.2019
ex84189910	70	Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles	0 %	p/st	31.12.2021
ex84212100	20	Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:ultrafiltration systemcarbon filtration systemwater softener systemfor use in a biopharmaceutical laboratory	0 %	p/st	31.12.2019
ex84219990	91	Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder	0 %	p/st	31.12.2023
ex84248970	20	Mechanical passenger car headlights washer with telescopic hose, high pressure nozzles and mounting clamps for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
ex84312000	30	Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427	0 %	p/st	31.12.2022
ex84312000	40	Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427	0 %	p/st	31.12.2023
ex84369900	10	Part containing:a single-phase AC motor,an epicyclic gearing,a cutter blade,and whether or not containing:a capacitor,a part fitted with a threaded bolt,for use in the manufacture of garden shredders	0 %	p/st	31.12.2020
ex84399900	10	Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more	0 %	p/st	31.12.2023
ex84679900ex85365011	1035	Mechanical switches for connecting electrical circuits, with:a voltage of 14,4 V or more but not more than 42 V,an amperage of 10 A or more but not more than 42 A,for use in the manufacture of machines falling within heading 8467	0 %	p/st	31.12.2019
ex84752900ex85141080	1010	Glass Filament Melter with heater basket/bushing assembly:electrically heated,with opening,with a multiplicity of tips (holes) of platinum/rhodium alloy,used to melt glass batches and condition molten glass,for drawing into continuous fibres	0 %	p/st	31.12.2019
ex84778099	10	Machines for casting or for surface modification of plastic membranes of heading 3921	0 %	p/st	31.12.2023
ex84798997	35	Mechanical unit ensuring the movement of the camshaft with:8 oil chambers,a phasing range of at least 38°, but not more than 62°,a steel and/or steel alloy sprocket,a steel and/or steel alloy rotor	0 %	—	31.12.2023
ex84798997ex84799020ex84799070	508080	Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line	0 %	p/st	31.12.2020
ex84798997	60	Bioreactor for biopharmaceutical cell culture:having interior surfaces of austenitic stainless steel, andwith a process capacity up to 15000 litres,whether or not combined with a "clean-in-process" system and/or a dedicated paired media hold vessel	0 %	p/st	31.12.2021
ex84798997	70	Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy	0 %	p/st	31.12.2019
ex84798997	80	Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries	0 %	p/st	31.12.2019
ex84798997	85	High Pressure Hard Materials Compression Press ("Link Press"):with a 16000 tonne pressure rating,with a 1100 mm diameter Bolster (± 1mm),with a 1400 mm main cylinder (± 1mm),with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system,with a double arm manipulator arrangement and connections for piping and electrical systems,with a total weight 310 tonnes (± 10 tonnes), andcreating 30000 atmospheres at 1500 degrees centigrade using Low Frequency Alternating Current (16000 amps)	0 %	p/st	31.12.2020
ex84799070	87	Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles	0 %	p/st	31.12.2021
ex84811099	20	Electromagnetic pressure reducing valvewith a plunger,with at least 275 MPa internal tightness,with a plastic connector with 2 silver or tin pins	0 %	—	31.12.2022
ex84811099	30	Pressure reducing valves in a brass case with:a length of not more than 18 mm (± 1 mm),a width of not more than 30 mm (± 1 mm),of a kind used for incorporation in fuel delivery modules of motor vehicles	0 %	—	31.12.2022
ex84813091	91	Steel check (non-return) valves with:an opening pressure of not more than 800 kPa,an external diameter not more than 37 mm	0 %	p/st	31.12.2019
ex84818059	10	Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines	0 %	p/st	31.12.2023
ex84818059	20	Pressure regulating valve for incorporation into compressors of motor vehicle air condition units	0 %	p/st	31.12.2021
ex84818059	30	Two-way flow control valve with housing, with:at least 5 but not more than 9 outlet holes with at least 0,110 mm but not more than 0,134 mm diameter,at least 640 cm3 / minute but not more than 805 cm3 / minute flow rate,at least 19 but not more than 300 MPa operating pressure	0 %	—	31.12.2022
ex84818059	40	Flow-control valve:made of steel,with an outlet hole with a diameter of at least 0,175 mm, but not more than 0,185 mm,with an inlet hole with a diameter of at least 0,255 mm, but not more than 0,265 mm,with chromium nitride coating,with a surface roughness of Rp 0,4	0 %	—	31.12.2022
ex84818059	50	Electromagnetic valve for quantity control witha plunger,DLC (Diamond-like carbon) coating,a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm,a supply voltage of 12 V	0 %	—	31.12.2022
ex84818059	60	Electromagnetic valve for quantity control:with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,52 Omh, and with an inductance of at least 0,083 mH, but not more than 0,172 mH,with a supply voltage of 24 V,operating at a DC of at least 15,5 A, but not more than 16,5 A	0 %	—	31.12.2022
ex84818069	60	Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valvea brass valve body including valve slider and copper connectionswith a working pressure up to 4,5 MPa	0 %	p/st	31.12.2022
ex84818073ex84818099	2070	Pressure- and flow-control valve controlled by external electromagnet:made of steel and/or steel alloy(s),without integrated circuit,of not more than 1000 kPa operating pressure,with a flow quantity of not more than 5 l/min,without an electromagnet	0 %	—	31.12.2023
ex84819000	40	Valve armature:for the opening and closing of the flow of fuel,consisting of a shaft and a blade,with 8 holes on the blade,made of metal and/or metal alloy(s)	0 %	—	31.12.2023
ex84821010ex84821090ex84825000	101010	Ball and cylindrical bearings:with an outside diameter of 28 mm or more but not more than 140 mm,with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa,for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants	0 %	p/st	31.12.2019
ex84821010ex84821090	4030	Ball bearings:with an internal diameter of 3 mm or more,with an external diameter of not more than 100 mm,with a width of not more than 40 mm,whether or not equipped with a duster,for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears or assembly ball screw for steering gears	0 %	p/st	31.12.2019
ex84833032ex84833038	3060	Bearing housing of a kind used in turbochargers:of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,with oil chambers,without bearings,with a diameter of 50 mm or more, but not more than 250 mm,with a height of 40 mm or more, but not more than 150 mm,whether or not with water chambers and connectors	0 %	p/st	31.12.2022
ex84834029	50	Gear set of cycloid gear type with:a rated torque of 50 Nm or more but not more than 9000 Nm,standard ratios of 1:50 or more but not more than 1:475,lost motion of not more than one arc minute,an efficiency of more than 80 %,of a kind used in robot arms	0 %	p/st	31.12.2021
ex84834029	60	Epicyclic gearing, of a kind used in driving hand-held power tools with:a rated torque of 25 Nm or more, but not more than 70 Nm,standard gear ratios of 1:12,7 or more, but not more than 1:64,3	0 %	p/st	31.12.2023
ex84834051	20	Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151	0 %	p/st	31.12.2023
ex84834059	20	Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151	0 %	p/st	31.12.2023
ex84834090	20	Hydrostatic transmission with:measurements (without shafts) of not more than 154 mm × 115 mm × 108 mm,a weight of not more than 3,3 kg,a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,a torque of the output shaft of not more than 10,4 Nm,a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, andan operating temperature range of – 5 °C or more, but not more than + 40 °C,for use in the manufacture of hand-operated lawn mowers of subheading 84331190	0 %	p/st	31.12.2022
ex84834090	30	Hydrostatic transmission with:a reduction of 20,63:1 or more, but not more than 22,68:1,an input speed of 1800 rpm or more when loaded and of not more than 3000 rpm when unloaded,a continuous output torque of 142 Nm or more, but not more than 156 Nm,an intermittent output torque of 264 Nm or more, but not more than 291 Nm, andan axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm,whether or not equipped with a fan impeller or with a pulley with integrated fan impeller,for use in the production of self-propelled lawn mowers with a seat of subheading 84331151, and tractors of subheading 87019190, whose main function is that of a lawn mower	0 %	p/st	31.12.2022
ex84834090	80	Transmission gearbox, with:not more than 3 gears,an automatic deceleration system, anda power reversal system,for use in the manufacture of goods of heading 8427	0 %	p/st	31.12.2020
ex84842000	10	Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units	0 %	p/st	31.12.2021
ex85011010	20	Synchronous motor for a dishwasher with a water flow control mechanism with:a length without axle of 24 mm (+/– 0,3),a diameter of 49,3 mm (+/– 0,3),a rated voltage of 220 V AC or more but not more than 240 V AC,a rated frequency of 50 Hz or more but not more than 60 Hz,an input power of not more than 4 W,a rotation speed of 4 rpm or more but not more than 4,8 rpm,an output torque of not less than 10 kgf/cm	0 %	—	31.12.2020
ex85011099	56	DC Motor:with a speed rotation of not more than 7000 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximum power of 13,78 W ( at 3,09 A),with a specified temperature range from – 40 °C to 160 °C,with a gear connection,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 100 Nm	0 %	—	31.12.2021
ex85011099	57	DC motor:with a rotor speed of not more than 6500 rpm when not loaded;with a rated voltage of 12,0 V (+/– 0,1);of a specified temperature range of – 40 °C or more, but not more than + 165 °C;with or without a connecting pinion;with or without an engine connector	0 %	—	31.12.2020
ex85011099	58	DC Motor:with a speed rotation of not more than 6500 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximal power below than 20 W,with a specified temperature range from – 40 °C to 160 °C,with a worm gear drive,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 75 Nm	0 %	—	31.12.2021
ex85011099	60	DC motor:with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loadedwith a power supply voltage of 100 V or more but not more than 240 Vfor use in the manufacture of electric fryers	0 %	—	31.12.2022
ex85011099	65	Electric turbocharger actuator, with:a DC motor,an integrated gear mechanism,a (pulling) force of 200 N or more at a minimum of 140 °C elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 25 mm,with or without an on-board diagnostics interface	0 %	—	31.12.2020
ex85011099	70	DC stepping motor, with:an angle of step of 7,5° (± 0,5°),a two-phase winding,a rated voltage of 9 V or more, but not more than 16,0 V,of a specified temperature range covering at least – 40 °C to + 105 °C,with or without connecting pinion,with or without motor drive connector	0 %	—	31.12.2023
ex85011099	75	Permanently excited DC motor with:a multiple-phase winding,an external diameter of 28 mm or more but not more than 35 mm,a rated speed of not more than 12000 rpm,a power supply voltage of 8 V or more but not more than 27 V	0 %	—	31.12.2020
ex85011099	79	DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C	0 %	—	31.12.2023
ex85011099	80	DC stepping motor, with:an angle of step of 7,5° (± 0,5°),a pull-out torque at 25 °C of 25 mNm or more,a pull-out pulse rate of 1500 pps or more,a two-phase winding, anda rated voltage of 10,5 V or more, but not more than 16,0 V	0 %	—	31.12.2023
ex85011099	82	DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1500 (± 15 %) rpm or 6800 (± 15 %) rpm, a supply voltage of 2 V or 8 V	0 %	—	31.12.2019
ex85012000	30	Universal AC/DC motor witha rated output of 1,2 kW,a supply voltage of 230 V, andengine brake,assembled to a reduction gear with output shaft, which is contained in a plastic housing,for use as electric drive of lawnmower blades	0 %	—	31.12.2022
ex85013100	30	DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)	0 %	—	31.12.2021
ex85013100	37	Permanently excited DC motor with:a multiple-phase winding,an external diameter of 30 mm or more but not more than 80 mm,a rated speed of not more than 15000 rpm,an output of 45 W or more but not more than 300 W, anda supply voltage of 9 V or more but not more than 50 V,whether or not with a drive disc,whether or not with a crankcase,whether or not with a fan,whether or not with a cap assembly,whether or not with a sun gear,whether or not with a speed and rotational direction encoder,whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type	0 %	—	31.12.2019
ex85013100	45	DC motors, brushless, with:an external diameter of 90 mm or more, but not more than 110 mm,a rated speed of not more than 3680 rpm,an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 °C,a supply voltage of 12 V,a torque of not more than 5,67 Nm,a rotor position sensor,an electronic star-point relay, andfor use with an electric power steering control module	0 %	—	31.12.2023
ex85013100	50	DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 9 V or more, but not more than 16 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without the rotor angle position sensor of resolver type or Hall effect type,of the kind used in power steering systems for cars	0 %	—	31.12.2022
ex85013100	55	DC motor with commutator, with:an external diameter of 27,5 mm or more, but not more than 45 mm,a rated speed of 11000 rpm or more, but not more than 23200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of not more than 529 W,a free load current of not more than 3,1 A,a maximum efficiency of 54 % or more,for driving hand-held power tools	0 %	—	31.12.2023
ex85013100ex85013200	7177	Automotive-ready, brushless and permanently excited direct current motor with:a specified speed of not more than 4100 rpm,a minimum output of 400 W, but not more than 1,3 kW (at 12 V),a flange diameter of 90 mm or more, but not more than 150 mm,a maximum length of 210 mm, measured from the beginning of the shaft to the outer ending,a housing length of not more than 160 mm, measured from the flange to the outer ending,a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, andsurface magnets	0 %	—	31.12.2020
ex85013100	75	Brushless DC motor assembly comprised of a motor and transmission, with:electronic control operating by Hall Effect position sensors,voltage input 9 V or more but not more than 16 V,external diameter of the motor 70 mm or more but not more than 80 mm,output motor power 350 W or more but not more than 550 W,maximum output torque 50 Nm or more but not more than 52 Nm,maximum output rotation speed 280 rpm or more but not more than 300 rpm,coaxial male spline outputs of outer diameter 20 mm (± 1 mm), 17 teeth and minimum length of teeth 25 mm (± 1 mm), andwith distance between root of splines 119 mm (± 1 mm),for use in the manufacture of all-terrain or utility task vehicles	0 %	—	31.12.2021
ex85013200ex85013300	6015	Traction motor, with:a torque output of 200 Nm or more but not more than 300 Nma power output of 50 kW or more but not more than 100 kWa rated speed of not more than 12500 rpmfor use in the manufacture of electric vehicles	0 %	—	31.12.2019
ex85013300ex85014080ex85015350	305010	Electric drive for motor vehicles, with an output of not more than 315 kW, with:an AC or DC motor whether or not with transmission,power electronics	0 %	—	31.12.2021
ex85015100ex85015220	3050	AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with:an output of 340 W or more but not more than 7,4 kW,a flange of dimensions of not more than 180 mm × 180 mm, anda length from flange to extreme end of resolver of not more than 271 mm	0 %	—	31.12.2021
ex85016120	35	Fuel cell module, AC generator with an output of 7,5 kVA or less, consisting of:a Hydrogen generator (desulphurizer, reformer and cleaner)a PEM fuel cell stack, andan Inverter,for use as a part in a heating appliance	0 %	—	31.12.2020
ex85016200	30	Fuel cell systemconsisting of at least phosphoric acid fuel cells,in a housing with integrated water management and gas treatment,for permanent, stationary energy supply	0 %	—	31.12.2022
ex85030091ex85030099	3132	Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring	0 %	p/st	31.12.2023
ex85030099	31	Stamped collector of an electric motor, having an external diameter of not more than 16 mm	0 %	p/st	31.12.2023
ex85030099	33	Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm	0 %	p/st	31.12.2021
ex85030099	34	Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm	0 %	p/st	31.12.2019
ex85030099	35	Transmitter resolver for brushless motors of electrical power steering	0 %	p/st	31.12.2019
ex85030099	37	Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with:diameter of the rotor body of 17 mm or more but not more than 37 mm,length of the rotor body of 12 mm or more but not more than 36 mm,shaft length of 52 mm or more but not more than 82 mm	0 %	—	31.12.2023
ex85030099	40	Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501	0 %	p/st	31.12.2022
ex85030099	60	Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)	0 %	p/st	31.12.2019
ex85043180	15	Electrical Transformer with:a capacity of 192 Watts or 216 Watts,dimensions of not more than 27,1 × 26,6 × 18 mm,an operating temperature range of – 40 °C or more, but not more than + 125 °C,three or four inductively coupled copper wire windings, and9 connection pins at the bottom	0 %	—	31.12.2023
ex85043180	25	Electrical Transformer with:a capacity of 432 Watts,dimensions of not more than 24 mm × 21 mm × 19 mm,an operating temperature range of – 20 °C or more, but not more than + 85 °C,two windings, and5 connection pins at the bottom	0 %	—	31.12.2023
ex85043180	30	Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters	0 %	—	31.12.2023
ex85043180	35	Electrical Transformer with:a capacity of 433 Watts,dimensions of not more than 37,3 × 38,2 × 28,5 mm,an operating temperature range of – 40 °C or more, but not more than + 125 °C,four inductively coupled copper wire windings, and13 connection pins at the bottom	0 %	—	31.12.2023
ex85043180	40	Electrical transformers:with a capacity of 1 kVA or less,without plugs or cables,for internal use in the manufacture of set top boxes and TVs	0 %	—	31.12.2022
ex85043180ex85045095	4515	Electrical Transformer with:a capacity of 0,2 Watts,dimensions of not more than 15 × 15,5 × 14 mm,an operating temperature range of – 10 °C or more, but not more than + 125 °C,two inductively coupled copper wire windings,5 connection pins at the bottom, anda copper shielding	0 %	—	31.12.2023
ex85043180	50	Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry	0 %	—	31.12.2021
ex85044082	40	Printed circuit board equipped with a bridge rectifier circuit and other active and passive components:with two output connectors,with two input connectors which are available and useable in parallel,able to switch between bright and dimmed operation mode,with an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, orwith an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, orwith an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode,with an input current reaching 80 % of its nominal value within 20 ms,with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions,with an maximum inrush current overshoot of not more than 250 % of the input current,with a period of the inrush current overshoot of not more than 100 ms,with an input current undershoot of not less than 50 % of the input current,with a period of the inrush current undershoot of not more than 20 ms,with a presettable output current,with an output current reaching 90 % of its nominal pre-set value within 50 ms,with an output current reaching zero within 30 ms after removal of the input voltage,with an defined failure status in case of no-load or too-high load (end-of-life function)	0 %	p/st	31.12.2022
ex85044082	50	Electric rectifier:with an input AC voltage of 100-240 V at frequency of 50-60 Hz,with two output DC voltages of 9 V or more but not more than 12 V and 396 V or more but not more than 420 V,output cables without connectors, andin a plastic enclosure with dimensions 110 mm (± 0,5 mm) × 60 mm (± 0,5 mm) × 38 mm (± 1 mm),for use in the manufacture of products using IPL (Intensive Pulse Light)	0 %	p/st	31.12.2022
ex85044088	30	DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles	0 %	p/st	31.12.2019
ex85044090	15	Semiconductor power module (so called Smart Power Module) for converting single-phase AC input voltage into 2 or 3-phase AV voltage used to power up polyphase AC variable-speed electrical drives, in a casing fitted with one or more integrated circuits, IGBTs, diodes and thermistors, having an output voltage of 600 VAC or 650 VAC, and a rated current of 4 A or more, but not more than 30 A	0 %	—	31.12.2021
ex85044090	25	Direct current to direct current converterwithout housing, orwith housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing	0 %	p/st	31.12.2021
ex85044090	30	Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 85165000	0 %	p/st	31.12.2023
ex85044090	40	Semiconductor power modules comprising:power transistors,integrated circuits,whether or not containing diodes and with or without thermistors,an operating voltage of not more than 600 V,not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, anda rms (root mean square) current rating of not more than 15,7 A	0 %	p/st	31.12.2023
ex85044090	50	Drive unit for industrial robot with:one or six 3-phase motor outputs with maximum 3 × 32 A,a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC,a logic power input of 24 V DC,an EtherCat communication interface, anda dimension of 150 × 140 × 120 mm or more, but not more than 335 × 430 × 179 mm	0 %	p/st	31.12.2023
ex85044090	70	Module for converting alternating current into direct current and direct current into direct current with:a rated power of not more than 100 W,an input voltage of 80 V or more, but not more than 305 V,an certified input frequency of 47 Hz or more, but not more than 440 Hz,one or more constant voltage output(s),an operating temperature range of – 40 °C or more, but not more than + 85 °C,pins for mounting to a printed circuit	0 %	p/st	31.12.2023
ex85044090	80	Power converter containing:a DC to DC convertera charger of a capacity of not not more than 7 kWswitching functionsfor use in the manufacture of electric vehicles	0 %	p/st	31.12.2019
ex85045095	20	Inductors with one or more windings, having an inductance of not more than 62 mH per winding/coil	0 %	p/st	31.12.2023
ex85045095	40	Coil choke with:an inductance of 4,7 μH (± 20 %),a DC resistance of not more than 0,1 Ohms,an insulation resistance of 100 MOhms or more at 500 V (DC),for use in the manufacture of LCD and LED module power boards	0 %	p/st	31.12.2020
ex85045095	50	Solenoid coil with:a power consumption of not more than 6 W,an insulation resistance of more than 100 M ohms, andan insert hole of 11,4 mm or more, but not more than 11,8 mm	0 %	p/st	31.12.2022
ex85045095	60	Inductors with one or more windings, with an inductance per winding of not more than 350 mH, for use in the manufacture of electronic control gear, control units and LED light sources for the lighting industry	0 %	—	31.12.2021
ex85045095	70	Solenoid coil with:a rated power of more than 10 W but not more than 15 W,an insulation resistance of 100 M Ohms or more,a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,a rated current of not more than 1,22 A,a rated voltage of not more than 25 V	0 %	p/st	31.12.2021
ex85045095	80	Self-induction coil:with one or more windings, with an inductivity per winding of no more than 62 mH, attached to one or more carrier materials,with ferrites,with one or more Negative Temperature Coefficient resistors as a temperature sensor,whether or not with insulation covers, spacers and connection cables	0 %	—	31.12.2022
ex85049011	10	Ferrite cores, other than for deflection yokes	0 %	p/st	31.12.2023
ex85049011	20	Reactor cores for use in a High Voltage Direct Current thyristor converter	0 %	p/st	31.12.2019
ex85049099	20	Thyristor SGCT (Symmetric Gate-Commutated Thyristor) with integrated gate driver:being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and electric and electronic components,having an ability to block the voltage - 6500 V - in both directions (conducting and the reverse direction),of a kind used in medium voltagestatic converters (rectifiers and inverters)	0 %	p/st	31.12.2019
ex85051100	47	Articles in the form of a triangle, square or rectangle, whether or not shaped or with rounded corners intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions:a length of 9 mm or more but not more than 105 mm,a width of 5 mm or more but not more than 105 mm, anda height of 2 mm or more but not more than 55 mm	0 %	—	31.12.2021
ex85051100	50	Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,of a kind to be used in the manufacture of electric servomotors for industrial automation	0 %	p/st	31.12.2022
ex85051100	53	Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with:a length of 97,5 mm or more, but not more than 225 mma diameter of 19 mm or more, but not more than 25 mm	0 %	—	31.12.2023
ex85051100ex85051990	5540	Flat bars of an alloy of samarium and cobalt witha length of 30,4 mm (± 0,05 mm),a width of 12,5 mm (± 0,15 mm),a thickness of 6,9 mm (± 0,05 mm), or composed of ferrites in the shape of a quarter sleeves with:a length of 46 mm (± 0,75 mm),a width of 29,7 mm (± 0,2 mm),intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars	0 %	p/st	31.12.2020
ex85051100	63	Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with:an external diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation	0 %	p/st	31.12.2022
ex85051100	65	Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having:a length of not more than 140 mm,a width of not more than 90 mm, anda thickness of not more than 55 mm,or in the shape of curved rectangle (tile type) having:a length of not more than 75 mm,a width of not more than 40 mm,a thickness of not more than 7 mm, anda radius of curvature of more than 86 mm but not more than 241 mm,or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre	0 %	p/st	31.12.2023
ex85051100	70	Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet:whether or not containing a hole in the centre,with a diameter of not more than 90 mm,of a kind used in car loudspeakers	0 %	—	31.12.2023
ex85051100	75	A quarter sleeve intended to become permanent magnet after magnetization:consisting of at least neodymium, iron and boron,with a width of 9,1 mm or more but not more than 10,5 mm,with a length of 20 mm or more but not more than 30,1 mm,of a kind used on rotors for the manufacture of fuel pumps	0 %	p/st	31.12.2019
ex85051990	30	Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT	0 %	—	31.12.2023
ex85051990	50	Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation:whether or not with bevelled edges,of a length of 27 mm or more but not more than 32 mm (± 0,15 mm),of a width of 8,5 mm or more but not more than 9,5 mm (+ 0,05 mm /– 0,09 mm),of a thickness of 5,5 mm or more but not more than 5,8 mm (+ 0/– 0,2 mm), andof a weight of 6,1 g or more but not more than 8,3 g	0 %	p/st	31.12.2022
ex85051990	60	Article of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve to become a permanent magnet after magnetization:of a length of 30 mm or more but not more than 50 mm (± 1 mm),of a width of 33 mm or more but not more than 55 mm (± 1 mm),of a height of 12,5 mm or more but not more than 21,5 mm (± 1 mm),of a thickness of 3,85 mm or more but not more than 6,8 mm (± 0,15 mm) and having an outer radius of 19 mm or more but not more than 29,4 mm (± 0,2 mm)	0 %	—	31.12.2023
ex85052000	30	Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles	0 %	p/st	31.12.2023
ex85059029	30	Coil for an electromagnetic valve, with:a plunger,a diameter of 12,9 mm (+/– 0,1),a height without plunger of 20,5 mm (+/– 0,1),an electric cable with connector, andin a cylindrical metal housing	0 %	p/st	31.12.2019
ex85065010	10	Lithium cylindrical primary cells with:a diameter of 14,0 mm or more but not more than 26,0 mm,a length of 2,2 mm or more but not more than 51 mm,a voltage of 1,5 V or more, but not more than 3,6 V,a capacity of 0,15 Ah or more, but not more than 5,00 Ah,for use in the manufacture of telemetry and medical devices, electronic meters or remote controls	0 %	—	31.12.2021
ex85065030	10	Lithium manganese dioxide cell, with:a diameter of 20 mm or more but not more than 25 mma length of 3 mm or more but not more than 6 mma voltage of 3 V or more but not more than 3,4 Va capacity of 200 mAh or more but not more than 600 mAhan automotive test temperature range from – 40 °C to + 125 °Cfor use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS)	0 %	—	31.12.2022
ex85065090	10	Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V	0 %	—	31.12.2023
ex85065090	30	Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah	0 %	—	31.12.2023
ex85071020	80	Lead acid starter battery, with:a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge,a liquid electrolyte,for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls	0 %	—	31.12.2020
ex85075000ex85076000	2020	Rectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries	0 %	—	31.12.2023
ex85075000	40	Nickel-metal Hydride (NiMH) battery assembly, with:a voltage of 190 V or more but not more than 210 V,a length of 220 mm or more but not more than 280 mm,a width of 500 mm or more but not more than 600 mm,a height of 100 mm or more but not more than 150 mm,for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2022
ex85076000	15	Cylindrical lithium-ion-accumulators or modules with:a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,a nominal voltage of 36 V or more, but not more than 48 V,a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles	0 %	—	31.12.2020
ex85076000	17	Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:a rated voltage of 12 V,a length of 350 mm or more but not more than 355 mm,a width of 170 mm or more but not more than 180 mm,a height of 180 mm or more but not more than 195 mm,weighing 10 kg or more but not more than 15 kg,a nominal charge of 60 Ah or more, but not more than 80 Ah	0 %	—	31.12.2020
ex85076000	23	Lithium-ion-accumulator or module with:a nominal capacity of 72 Ah or more, but not more than 100 Ah,a nominal voltage of 3,2 V,a weight of 1,9 kg more, but not more than 3,4 kg,for use in the manufacture of rechargeable hybrid electric vehicle batteries	0 %	—	31.12.2020
ex85076000	25	Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm),a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm),a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm),a weight of 45,9 kg or 46,3 kg,a rating of 75 Ah, anda nominal voltage of 60 V	0 %	p/st	31.12.2022
ex85076000	27	Lithium-ion cylindrical accumulator with:a nominal capacity of 10 Ah or more, but not more than 20 Ah,a nominal voltage of 12,8 V (± 0,05) or more, but not more than 15,2 V (± 0,05),a power of 128 Wh or more, but not more than 256 Wh,for use in the manufacture of electric bicycle drives	0 %	—	31.12.2020
ex85076000	30	Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries	0 %	—	31.12.2019
ex85076000	33	Lithium-ion accumulator, with:a length of 150 mm or more, but not more than 300 mma width of 700 mm or more, but not more than 1000 mma height of 1100 mm or more, but not more than 1500 mma weight of 75 kg or more, but not more than 160 kga nominal capacity not less than 150 Ah and not more than 500 Ah	0 %	—	31.12.2020
ex85076000	37	Lithium-ion accumulator, with:a length of 1200 mm or more, but not more than 2000 mma width of 800 mm or more, but not more than 1300 mma height of 2000 mm or more, but not more than 2800 mma weight of 1800 kg or more, but not more than 3000 kga nominal capacity of 2800 Ah or more but not more than 7200 Ah	0 %	—	31.12.2020
ex85076000	43	Lithium-ion accumulators, with:a thickness of not more than 4,15 mm,a width of not more than 245,15 mm,a length of not more than 90,15 mm,a nominal capacity of 1000 mAh or more but not more than 10000 mAh,a weight of not more than 250 g,for use in the manufacture of products falling within subheading 84713000	0 %	—	31.12.2020
ex85076000ex85078000	4520	Rechargeable lithium-ion polymer battery with:a nominal capacity of 1060 mAh,a nominal voltage of 7,4 V (average voltage at 0,2 C discharge),a charging voltage of 8,4 V (± 0,05),a length of 86,4 mm (± 0,1),a width of 45 mm (± 0,1),a height of 11 mm (± 0,1),for use in the manufacture of cash registers	0 %	—	31.12.2019
ex85076000	47	Lithium-ion accumulators, with:a thickness of not more than 6 mm,a width of not more than 100 mm,a length of not more than 150,15 mm,a nominal capacity of 1000 mAh or more but not more than 10000 mAh,a weight of not more than 150 g,for use in the manufacture of products falling within subheading 85171200	0 %	—	31.12.2020
ex85076000	50	Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 408 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 138 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda power of 458 Wh or more, but not more than 2158 Wh	0 %	—	31.12.2022
ex85076000	53	Batteries of lithium-ion electric accumulators or rechargeable module:a length of 1203 mm or more, but not more than 1297 mm,a width of 282 mm or more, but not more than 772 mm,a height of 792 mm or more, but not more than 839 mm,a weight of 253 kg or more, but not more than 293 kg,power of 22 kWh or 26 kWh, andconstituted of 24 or 48 modules	0 %	—	31.12.2022
ex85076000	60	Lithium-ion rechargeable batteries, with:a length of 1213 mm or more, but not more than 1575 mm,a width of 245 mm or more but not more than 1200 mm,a height of 265 mm or more, but not more than 755 mm,a weight of 265 kg or more but not more than 294 kg,a nominal capacity of 66,6 Ah,put up in packs of 48 modules	0 %	—	31.12.2020
ex85076000	65	Cylindrical lithium ion cell with:3,5 VDC to 3,8 VDC,300 mAh to 900 mAh, anda diameter of 10,0 mm to 14,5 mm	0 %	—	31.12.2021
ex85076000	71	Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mma width of 935 mm or more, but not more than 1660 mma height of 85 mm or more, but not more than 700 mma weight of 250 kgor more, but not more than 700 kga power of not more than 175 kWh	0 %	—	31.12.2021
ex85076000	75	Rectangular lithium-ion-accumulator, with:a metal casing,a length of 173 mm (± 0,15 mm),a width of 21 mm (± 0,1 mm),a height of 91 mm (± 0,15 mm),a nominal voltage of 3,3 V, anda nominal capacity of 21 Ah or more	0 %	—	31.12.2021
ex85076000	80	Rectangular lithium-ion-accumulator or module, witha metal casing,a length of 171 mm (± 3 mm),a width of 45,5 mm (± 1 mm),a height of 115 mm (± 1 mm),a nominal voltage of 3,75 V, anda nominal capacity of 50 Ah,for use in the manufacture of rechargeable batteries for motor vehicles	0 %	—	31.12.2020
ex85076000	85	Lithium-ion Rectangular modules for incorporation in lithium-ion rechargeable batteries:of a length of 300 mm or more, but not more than 350 mm,of a width of 79,8 mm or more, but not more than 225 mm,of a height of 35 mm or more, but not more than 168 mm,of a weight of 3,95 kg or more, but not more than 8,85 kg,with a rating of 66,6 Ah or more, but not more than 129 Ah	0 %	—	31.12.2020
ex85079080	70	Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (± 0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric rechargeable batteries	0 %	p/st	31.12.2021
ex85087000ex85371098	1096	Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W	0 %	p/st	31.12.2020
ex85087000ex85371098	2098	Electronic circuit cards that:are connected by wire or radio frequency to each other and the motor controller card, andregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)	0 %	p/st	31.12.2020
ex85113000	30	Igniter integrated coil assembly with:an igniter,a coil on plug assembly with an integrated mounting bracket,a housing,a length of 90 mm or more but not more than 200 mm (± 5 mm),an operating temperature of – 40 °C or more but not more than 130 °C,a voltage of 10,5 V or more, but not more than 16 V	0 %	p/st	31.12.2019
ex85113000	55	Ignition coil:with a length of 50 mm or more, but not more than 200 mm,with an operating temperature of – 40 °C or more, but not more than 140 °C, andwith a voltage of 9 V or more, but not more than 16 V,with or without connection cable,for use in the manufacture of engines of motor vehicles	0 %	—	31.12.2021
ex85118000	20	Glow-plug for pre-heating of the diesel engines with:an operating temperature of more than 800 °C,a voltage of 5 V or more, but not more than 16 V,a heating rod containing silicon nitride (Si3N4) and molybdenum disilicide (MoSi2), anda metal housing,for use in the manufacture of diesel engines of motor vehicles	0 %	—	31.12.2021
ex85122000	20	Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87	0 %	p/st	31.12.2019
ex85122000	30	Lighting module, containing at least:two LEDs,glass or plastic lenses, focusing/scattering the light emitted by the LEDs,reflectors redirecting the light emitted by the LEDs,in an aluminium housing with a radiator, mounted at a bracket with an actuator	0 %	p/st	31.12.2020
ex85122000	40	Fog lamp with a galvanised inner surface, containing:a plastic holder with three or more brackets,one or more 12 V bulbs,a connector,a plastic cover,whether or not with a connection cable,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex85123090	10	Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:coil,magnet,metal membrane,connector,holder,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex85123090	20	Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holder,of a kind used in the manufacture of goods of chapter 87	0 %	p/st	31.12.2020
ex85123090	30	Sound alarm device for protection against burglary into the vehicle:with an operating temperature of – 45 °C or more, but not more than + 95 °C,with a voltage of 9 V or more but not more than 16 V,in a plastic housing,whether or not with a metal holder,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
ex85124000ex85168020	1020	Car door mirror heating foil:with two electrical contacts,with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),with a protective paper film on both sides	0 %	—	31.12.2023
ex85142080ex85165000ex85166080	101010	Cavity assembly comprising at least:a transformer with an input of not more than 240 V and an output of not more than 3000 Wan AC or DC fan motor with an output of not more than 42 wattsa housing made of stainless steelwith or without a magnetron of a microwave output power of not more than 900 Wfor use in the manufacture of built-in products of headings 85142080, 85165000 and 85166080	0 %	p/st	31.12.2019
ex85169000	60	Ventilation sub-assembly of an electric deep-fat fryer:fitted with a motor having a power rating of 8 W at 4600 rpm,governed by an electronic circuit,operating at ambient temperatures above 110 °C,fitted with a thermoregulator	0 %	p/st	31.12.2019
ex85169000	70	Inner pot:containing side and central openings,of annealed aluminium,with a ceramic coating, heat resistant to more than 200 °C,for use in the manufacture of an electric fryer	0 %	p/st	31.12.2022
ex85169000	80	Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 85142080, 85165000 and 85166080	0 %	p/st	31.12.2019
ex85182995	30	Loudspeakers of:an impedance of 3 Ohm or more, but not more than 16 Ohm,a nominal power of 2 W or more, but not more than 20 W,with or without plastic bracket, andwith or without electric cable fitted with connectors,of a kind used for TV sets and video monitors manufacture as well as home entertainment systems	0 %	—	31.12.2022
ex85182995	40	Loudspeakerof an impedance of 1,5 Ohm or more, but not more than 10 Ohm,of a diameter of 25 mm or more but not more than 80 mm,with frequency range of 150 Hz to 20 kHz,with rated power of 5 W or more, but not more than 40 W, andwhether or not with electric cable with connector,whether or not with a bracket,used in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
ex85183095	20	Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm	0 %	p/st	31.12.2023
ex85184080	91	Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality	0 %	—	31.12.2019
ex85184080	92	Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits	0 %	—	31.12.2020
ex85184080	93	Audio power amplifier with:an output power of 50 W,an operating voltage of more than 9 V but not more than 16 V,an electrical impedance of not more than 4 Ohm,a sensitivity of more than 80 dB,in a metal housing,for use in the manufacture of motor vehicles	0 %	p/st	31.12.2021
ex85189000	30	Magnet system consisting of:a steel coreplate, in the form of a disk on one side provided with a cylindera neodymium magnetan upper platea lower plateof a kind used in car loudspeakers	0 %	p/st	31.12.2019
ex85189000	35	Metal plateof steel,perforated, andmeasuring 60,30 mm (+ 0,00 mm /– 0,40 mm) × 15,5 mm (+ 0,00 mm /– 0,40 mm) × 4,40 mm (± 0,05 mm),for use in the manufacture of loudspeaker passive radiators	0 %	—	31.12.2021
ex85189000	40	Loudspeaker cone, made from paper pulp or polypropylene, with accompanying dustcaps, of a kind used in car loudspeakers	0 %	p/st	31.12.2019
ex85189000	50	Diaphragm for an electrodynamic speaker with:an outside diameter of 25 mm or more but not more than 250 mm,a resonance frequency of 20 Hz or more but not more than 150 Hz,a total height of 5 mm or more but not more than 50 mm,an edge thickness of 0,1 mm or more but not more than 3 mm	0 %	p/st	31.12.2019
ex85189000	60	Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the shape of a disk, whether or not containing a hole in the centre, of a kind used in car loudspeakers	0 %	—	31.12.2020
ex85189000	80	Integrated car loudspeaker housing, consisting of:a speaker frame and magnet system holder with a protective coating, andan embossed anti-dust cloth	0 %	p/st	31.12.2019
ex85219000	20	Digital video recorder:without a hard disk drive,with or without a DVD-RW drive,with either motion detection or capability of motion detection through IP connectivity via LAN connectorwith or without a USB serial port,for use in the manufacture of closed-circuit television (CCTV) surveillance systems	0 %	—	31.12.2019
ex85229049ex85279900ex85299065	601025	Printed circuit board assembly comprising:a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,a microprocessor capable of receiving remote control messages and controlling the tuner chipset,for use in the manufacture of home entertainment systems	0 %	p/st	31.12.2019
ex85229049ex85279900ex85299065	652040	Printed circuit board subassembly, comprising:a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,a radio frequency (RF) remote control receiver,an infrared remote control signal transmitter,a SCART signal generator,a TV state sensor,for use in the manufacture of home entertainment systems	0 %	p/st	31.12.2019
ex85229080ex85299092	3057	Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players	0 %	p/st	31.12.2021
ex85229080	65	Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording	0 %	p/st	31.12.2023
ex85229080	80	Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 8543	0 %	p/st	31.12.2023
ex85229080	84	Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:an optical pick up unit with laser diodes operating at three different wavelengths,a spindle motor,a stepping motor	0 %	p/st	31.12.2023
ex85229080	97	Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8521	0 %	p/st	31.12.2021
ex85258019ex85258091	3110	Camera:of a weight of not more than 5,9 kg,without a housing,of dimensions of not more than 405 mm × 315 mm,with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor,with effective pixels of not more than 5 megapixels,for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks	0 %	—	31.12.2023
ex85258019	60	Image scanning cameras, using:a "Dynamic"- or "Static overlay lines" system,an output NTSC video signal,a voltage of 6,5 V or more,an illuminance of 0,5 lux or more	0 %	—	31.12.2019
ex85258019	65	Cameras using MIPI electrical interface with:an image sensor,an objective (lens),a colour processor,a flexible printed circuit board or a printed circuit board,whether or not capable of receiving audio signals,a module dimension of not more than 15 mm × 15 mm × 15 mm,a resolution of 2 mega pixel or more (1616*1232 pixels and higher),whether or not wired, anda housing,for use in the manufacture of products falling within subheading 85171200 or 84713000	0 %	—	31.12.2020
ex85258019	70	Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:a sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm,a resolution of up to 640 × 512 pixels,a weight of not more than 400 g,measurements of not more than 70 mm × 86 mm × 82 mm,whether or not in a housing,with automotive- qualified plug, anda deviation of the output signal over the entire work temperature range of not more than 20 %	0 %	—	31.12.2019
ex85261000	20	Radar sensor with control unit for autonomous emergency car braking system for use in manufacture of goods of Chapter 87	0 %	—	31.12.2021
ex85269120	30	Control unit of the emergency call system containing GSM and GPS module, for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2019
ex85279199ex85299065	2085	Assembly consisting of at least:an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,a transformer, anda radio broadcast receiver,for use in the manufacture of consumer electronic products	0 %	—	31.12.2019
ex85285900	10	Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less:without a housing, with back cover and mounting frame, orwith a housing,used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94	0 %	—	31.12.2023
ex85285900	20	Liquid crystal display colour video monitor assembly mounted on a frame,excluding those combined with other apparatus,comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,used for permanent incorporation or permanent mounting into entertainment systems for vehicles	0 %	—	31.12.2019
ex85291080	60	Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing	0 %	p/st	31.12.2023
ex85291080	70	Ceramic filters:with an applicable frequency range of 10 kHz or more but no more than 100 MHzwith a housing of ceramic plates provided with electrodesof a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment	0 %	p/st	31.12.2019
ex85299065	15	Electronic assembly comprising at least:a printed circuitprocessors for multi-media applications and video signal processingFPGA (Field Programmable Gate Array)Flash memoryoperating memoryHDMI, VGA, USB and RJ-45 interfacessockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel	0 %	p/st	31.12.2020
ex85299065ex85489090	3044	Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing	0 %	p/st	31.12.2023
ex85299065	45	Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 8527	0 %	p/st	31.12.2019
ex85299065	50	Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528	0 %	p/st	31.12.2021
ex85299065ex85299092	6553	Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module	0 %	p/st	31.12.2020
ex85299065	75	Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels	0 %	p/st	31.12.2022
ex85299065	80	Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 8527	0 %	—	31.12.2019
ex85299092ex85489090	1560	LCD modules:solely consisting of one or more TFT glass or plastic cells,not combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit, andwith or without inverters	0 %	p/st	31.12.2023
ex85299092	25	LCD modules, not combined with touch screen facilities, solely consisting of:one or more TFT glass or plastic cells,a die cast heat sink,a backlight unit,one printed circuit board with micro controller, andLVDS (Low Voltage Differential Signalling) interface,for use in the manufacture of radios for motor vehicles	0 %	p/st	31.12.2020
ex85299092	33	LCD modules combined with touch screen facilities:solely consisting of one or more TFT cells,with a diagonal measurement of the screen of 10,7 cm or more but not more than 36 cm,with or without LED backlight,with control electronics for pixel addressing only,without an EPROM memory (Erasable Programmable Read-only Memory),with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface,used solely for installation in motor vehicles of Chapter 87	0 %	—	31.12.2022
ex85299092	37	Fastening and covering ledges of aluminium alloy containing:silicon and magnesium,with a length of 300 mm or more but not more than 2200 mm,specifically shaped for use in the manufacture of TV sets	0 %	—	31.12.2020
ex85299092	42	Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528	0 %	p/st	31.12.2023
ex85299092	43	Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply	0 %	p/st	31.12.2023
ex85299092	45	Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats	0 %	p/st	31.12.2023
ex85299092	47	Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel	0 %	p/st	31.12.2019
ex85299092ex85366990	4983	AC socket with a noise filter, composed of:AC socket (for power cord connection) of 230 V,integrated noise filter composed of capacitors and inductors,cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,whether or not equipped with a metal support, which joins the AC socket to the PDP TV set	0 %	p/st	31.12.2019
ex85299092	51	OLED modules, consisting of one or more TFT glass or plastic cells:a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm,with a thickness of not more than 55mm,containing organic material,with control electronic for pixel addressing only,with V-by-One Interface and with or without a plug for power supply,with or without back cover,of a kind used in the manufacture of TV sets and monitors	0 %	—	31.12.2023
ex85299092	55	OLED modules, consisting of:one or more TFT glass or plastic cells, containing organic material,with or without combined touch screen facilities, andone or more printed circuit boards with control electronics for pixel addressing,for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2019
ex85299092	63	LCD module:with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,with or without a touch screen,with an LED backlight,with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,with a plug for power supply and CAN and LVDS interfaces,with or without electronic components for dynamic adjustments of colour,in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,suitable for installation in motor vehicles of Chapter 87	0 %	p/st	31.12.2020
ex85299092	65	OLED display consisting of:the organic layer with organic LEDs,two conductive layers on electron transfer and electron holes,layers of transistors (TFT) with resolution of 1920 × 1080,anode and cathode for power supply of organic diodes,RGB filter,glass or plastic protective layer,without the electronics for pixel addressing,for use in the manufacture of goods of headings 8528	0 %	p/st	31.12.2019
ex85299092	67	Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with or without a touch screen,with backlight, micro-controller,with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,whether or not with haptic and acoustical feedback,for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2020
ex85299092	70	Rectangular fastening and covering frame:of an aluminium alloy containing silicon and magnesium,with a length of 500 mm or more but not more than 2200 mm,with a width of 300 mm or more but not more than 1500 mm,of a kind used for the production of TV sets	0 %	p/st	31.12.2022
ex85299092	85	Colour LCD module in a housing:with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,without touch screen,with a backlight and micro-controller,with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,without a signal processing module,with control electronics for pixel addressing only,with a motorised mechanism for moving the display screen,for permanent installation in vehicles of Chapter 87	0 %	p/st	31.12.2020
ex85359000ex85365080	3083	Semiconductor module switch in a casing:consisting of an IGBT transistor chip and a diode chip on one or more lead frames,for a voltage of 600 V or 1200 V	0 %	p/st	31.12.2020
ex85364110	20	Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less	0 %	—	31.12.2021
ex85364190	40	A power relay with:an electromechanical switching function,a load current of 3 amperes or more but not exceeding 16 amperes,a coil voltage of 5 volts or more but not exceeding 24 volts,a distance between the connector pins of the load circuit not more than 12,5 mm	0 %	p/st	31.12.2023
ex85364190	50	Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with one or two photovoltaic generators and two power MOSFET output switches in a casing with connections for a maximum voltage of 60 volts and a minimum current of 2 amps	0 %	—	31.12.2021
ex85364900	30	Relays with:a nominal voltage of 12 V DCan allowable voltage of not more than 16 V DCa coil resistance at 20 °C of 26, 7 Ohm (± 10 %)a pick-up voltage at 60 °C of not more than 8,5 Va drop-out voltage at 20 °C of 1 V or morea nominal operating power at 20 °C of 5,4 Wattsa switching voltage of not more than 400 V DCa permanent current-carrying capacity of not more than 120 Afor use in the manufacture of batteries for electric vehicles	0 %	—	31.12.2020
ex85364900	40	Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts	0 %	—	31.12.2021
ex85365011	40	Push-button switch for keyless start for a voltage of 12 V in a plastic housing, comprising at least:printed circuit board,LED diode,connector,brackets for mounting,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
ex85365019ex85365080	9397	Devices, having adjustable controller and switching functions, comprising one or more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing	0 %	p/st	31.12.2023
ex85365080	81	Mechanical speed governer switches for connecting electrical circuits, with:a voltage of 240 V or more but not more than 250 V,an amperage of 4 A or more but not more than 6 A,for use in the manufacture of machines falling within heading 8467	0 %	p/st	31.12.2019
ex85365080	82	Mechanical switches for connecting electrical circuits, with:a voltage of 240 V or more but not more than 300 V,an amperage of 3 A or more but not more than 15 A,for use in the manufacture of machines falling within heading 8467	0 %	p/st	31.12.2019
ex85366990	51	SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528	0 %	p/st	31.12.2022
ex85366990	60	Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors	0 %	p/st	31.12.2020
ex85366990	82	Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:a pulse transformer, including a wide-band ferrite core,a common mode coil,a resistor,a capacitor,for use in the manufacture of products falling within headings 8521 or 8528	0 %	p/st	31.12.2019
ex85366990	84	Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528	0 %	p/st	31.12.2020
ex85366990	85	Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528	0 %	p/st	31.12.2021
ex85366990	86	High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528	0 %	p/st	31.12.2021
ex85367000	10	Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528	0 %	p/st	31.12.2021
ex85369095	20	Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V	0 %	p/st	31.12.2020
ex85369095	40	Rivet contacts:of copperplated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken togetherwith a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm)whether or not gilded	0 %	p/st	31.12.2020
ex85369095ex85444993	9410	Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements	0 %	p/st	31.12.2023
ex85371091	50	Fuse control module in a plastic housing with mounting brackets comprising:sockets with or without fuses,connecting ports,a printed circuit board with embedded microprocessor, micro switch and relay,of a kind used in the manufacture of goods of chapter 87	0 %	p/st	31.12.2020
ex85371091ex85371098	6045	Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:an AC power input of 208 V or more but not more than 400 V,a logic power input of 24 V DC,an automatic circuit breaker,a main power switch,internal or external electrical connectors and cables,in a housing with dimension of 281 mm × 180 mm × 75 mm or more, but not more than 630 mm × 420 mm × 230 mm,of a kind used for manufacturing recycling or sorting machines	0 %	p/st	31.12.2023
ex85371091	65	Electronic control unit for optimal engine performance:with a programmable memory,with a voltage of 8 V or more but not more than 16 V,with at least one composite connector,in a metal housing,whether or not with metal holders,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
ex85371091	70	Programmable memory controller for a voltage not exceeding 1000 V, of a kind used for the operation of a combustion motor and/or various actuators working with a combustion motor, comprising at least:a printed circuit with active and passive components,an aluminium housing, andmultiple connectors	0 %	p/st	31.12.2022
ex85371098	30	Motor bridge ICs without programmable memory consisting of:one or more integrated circuits, not interconnected, on separate lead frames,also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars,mounted in a plastic housing	0 %	p/st	31.12.2023
ex85371098	35	Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:2 rotary knobs27 or more pushbuttonsLED lights2 integrated circuits for receiving and sending of control signals via the LIN-bus	0 %	p/st	31.12.2020
ex85371098	40	Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:a length of 50 mm or more, but not more than 120 mm,a width of 20 mm or more but not more than 40 mm,a height of 30 mm or more, but not more than 120 mm,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex85371098	50	Electronic control unit BCM (Body Control Module) comprising:plastic box with printed circuit board and metal holder,with voltage of 9 V or more, but not more than 16 V,able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex85371098	60	Electronic assembly consisting of:a microprocessor,light-emitting diode (LED) or liquid crystal display (LCD) indicators,electronic components mounted on a printed circuit,for use in the manufacture of built-in products of headings 85142080, 85165000 and 85166080	0 %	p/st	31.12.2019
ex85371098	65	Lever for control module under the steering wheel:with one or more single or multi-positional electrical switches (push-button, rotary or other),whether or not equipped with printed circuit boards and electrical cables,for a voltage of 9 V or more but not more than 16 V,of a kind used in the manufacture of motor vehicles of Chapter 87	0 %	p/st	31.12.2021
ex85371098	75	Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:an antenna,a connector,a metal holder,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex85371098	93	Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems	0 %	p/st	31.12.2023
ex85389091ex85389099	2050	Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,a connection cable with a plug,at least two mounting brackets,whether or not PCB including integrated circuits, diodes and transistors,of a kind used in the manufacture of goods of CN heading 8703	0 %	p/st	31.12.2020
ex85389099ex85472000	3010	Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint	0 %	p/st	31.12.2019
ex85389099	40	Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more	0 %	p/st	31.12.2019
ex85389099	60	Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87	0 %	p/st	31.12.2021
ex85389099	95	Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1200 V	0 %	p/st	31.12.2023
ex85402080	91	Photomultiplier	0 %	—	31.12.2021
ex85407100	20	Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 85165000	0 %	—	31.12.2023
ex85408900	91	Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons	0 %	—	31.12.2023
ex85408900	92	Vacuum fluorescent display tube	0 %	—	31.12.2023
ex85409100	20	Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having:a graphite carbon shield mounted in a mini-Vogel type systemseparate pyrolytic carbon blocks used as heating elements anda cathode temperature of less than 1800 K at a filament current of 1,26 A	0 %	—	31.12.2022
ex85437090	15	Laminated electrochromic film consisting of:two outer layers of polyester,a middle layer of acrylic polymer and silicone, andtwo electric connection terminals	0 %	—	31.12.2021
ex85437090	30	Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing	0 %	p/st	31.12.2023
ex85437090	33	High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing	0 %	—	31.12.2021
ex85437090	34	Gallium nitride (GaN) high-frequency amplifier consisting of one or more discrete transistors, one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing	0 %	—	31.12.2021
ex85437090	35	Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing	0 %	p/st	31.12.2023
ex85437090	45	Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing	0 %	p/st	31.12.2023
ex85437090	55	Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing	0 %	p/st	31.12.2023
ex85437090	80	Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing	0 %	p/st	31.12.2023
ex85437090	85	Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing	0 %	p/st	31.12.2023
ex85437090	95	Mobile telephone view and control module comprising of:a mains power/ CAN (Controller area network) output socket,a universal serial bus (USB) and audio IN/OUT ports, andincorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2020
ex85442000ex85444290ex85444993	102020	PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),a distance between conductors of not more than 0,5 mm, anda pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm	0 %	—	31.12.2023
ex85442000	30	Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:a coaxial cable,two or more connectors, and3 or more plastic clips for attachment to the dashboard,of a kind used in the manufacture of goods of Chapter 87	0 %	—	31.12.2021
ex85443000	30	Multi-measurement wire harness of a voltage of 5 V or more but not more than 90 V capable of measuring some or all of the following:a travel speed of not more than 24 km/ha motor speed of not more than 4500 rpmhydraulic pressure of not more than 25 MPamass of not more than 50 metric tonnesfor use in the manufacture of vehicles of heading 8427	0 %	p/st	31.12.2023
ex85443000	35	Wire harness:with an operation voltage of 12V,wrapped in tape or covered in plastic convoluted tubing,with 16 or more strands, with all terminals to be tin plated or equipped with connectors,for use in the manufacture of all-terrain or utility task vehicles	0 %	—	31.12.2021
ex85443000ex85444290	4040	Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box	0 %	p/st	31.12.2019
ex85443000ex85444290	6050	Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87	0 %	—	31.12.2020
ex85443000	70	Multi-measurement wire harness:of a voltage of 5 V or more but not more than 90 V,capable of transmitting information,for use in the manufacture of vehicles of heading 8711	0 %	p/st	31.12.2019
ex85443000ex85444290	8565	Extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2020
ex85444290	10	Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (± 0,25 V),connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,outer screening shielding,used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits	0 %	p/st	31.12.2023
ex85444290	15	PVC isolated flexible eight wire cable with:a length of not more than 2100 mm,an operating voltage of 5 V or more, but not more than 35 V,a temperature resistance of not more than 80 °C,either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end, andat least two stripped and tinned wires on the other end,whether or not with mounted rubber pad with integrated strain relief	0 %	—	31.12.2023
ex85444290	25	PVC isolated flexible cable with:a length of not more than 1800 mm,an operating voltage of 5V or more, but not more than 35V,a heat resistance of not more than 80 °C,an over-moulded 8 pin MiniFit male connector on one end,either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end,a over-moulded resistor inside the connector, anda moulded strain relief on the cable,whether or not with a over-moulded diode inside a connector	0 %	—	31.12.2023
ex85444290	35	PVC isolated flexible six or eight wire cable with:a length of not more than 1300 mm,an operating voltage of 5 V or more, but not more than 35 V,a heat resistance of not more than 80 °C,either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end, andeither an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end	0 %	—	31.12.2023
ex85444290	70	Electric conductors:of a voltage of not more than 80 V,with a length of not more than 120 cm,fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors	0 %	p/st	31.12.2020
ex85444290	80	12-wire connecting cable containing two connectors:of a voltage of 5 V,with a length of not more than 300 mm,for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex85444991	10	Insulated copper electrical wires:with individual conductor wires of a diameter exceeding 0,51 mm,for a voltage of not more than 1000 V,for use in the manufacture of automotive cable harnesses	0 %	m	31.12.2019
ex85444993	30	Electric conductors:of a voltage of not more than 80 V,of a platinum-iridium-alloy,coated with poly(tetrafluoroethylene),without connectors,for use in the manufacture of hearing aids, implants and speech processors	0 %	m	31.12.2020
ex85459090	20	Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes	0 %	—	31.12.2020
ex85481029	10	Spent lithium-ion or nickel metal hydride electric accumulators	0 %	—	31.12.2023
ex85489090	41	Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing	0 %	p/st	31.12.2023
ex85489090	43	Contact image sensor	0 %	p/st	31.12.2023
ex85489090	48	Optical unit, containing at least:a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nman optical lensa "Recording Photodetector Integrated Circuit" (PDIC)a focussing and tracking actuator	0 %	p/st	31.12.2021
ex85489090	65	LCD modules:solely consisting of one or more TFT glass or plastic cells,combined with touch screen facilities,with one or more printed circuits boards with control electronics for pixel addressing only,with or without backlight unit, andwith or without inverters	0 %	p/st	31.12.2023
ex87081010ex87081090	1010	Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex87083010ex87083091ex87083099	206010	Motor powered brake actuation unitwith a rating of 13,5 V (± 0,5 V), anda ball screw mechanism to control brake fluid pressure in the master cylinder,for use in the manufacture of electric motor vehicles	0 %	p/st	31.12.2019
ex87083010ex87083091	4030	Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex87083010ex87083091	5010	Drum type parking brake:operating within the service brake disk,with a diameter of 170 mm or more but not more than 195 mm,for use in the manufacture of motor vehicles	0 %	p/st	31.12.2021
ex87083010ex87083091	6020	Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex87083010ex87083091	7040	Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
ex87084020ex87084050	2010	Automatic hydrodynamic gearbox:with a hydraulic torque converter,without transfer box and cardan shaft,whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 87	0 %	p/st	31.12.2020
ex87084020	30	Automatic gearbox with a hydraulic torque converter with:at least eight gears,an engine torque of 300 Nm or more, andtransverse or longitudinal installation,for use in the manufacture of motor vehicles of heading 8703	0 %	p/st	31.12.2022
ex87084020ex87084050	4030	Gear box assembly with one or two inputs and at least three outputs in cast aluminium housing with overall dimensions (excluding the shafts) of not more than 455 mm (width) × 462 mm (height), 680 mm length, equipped with at least:one exterior-splined output shaft,a rotary switch to indicate gear position,the potential for a differential,for use in the manufacture of all-terrain or utility task vehicles	0 %	p/st	31.12.2021
ex87084020ex87084050	5040	Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:cast aluminium body,differential gear,2 electrical motors and gears,with the dimensions of:a width of 300 mm or more but not more than 350 mm,a height of 420 mm or more but not more than 500 mm,a length of 500 mm or more but not more than 600 mm,for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2022
ex87085020ex87085099	2010	Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle:of a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg	0 %	p/st	31.12.2020
ex87085020ex87085099ex87089910ex87089997	40307080	Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148 mm (± 1 mm) × 213 mm (± 1 mm) × 273 mm (± 1 mm) comprising at least:two electro-magnetic one direction clutches in one cage, working in both directions,an input shaft with outer diameter of 24 mm (± 1 mm), ended with spline of 22,a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 mm, ended with spline of 22 teeth or more but not more than 28 teeth,for use in the manufacture of all-terrain or utility task vehicles	0 %	p/st	31.12.2021
ex87085020ex87085055ex87085091ex87085099	50201040	Double flange bearing of 3rd generation, for motor vehicles:with double-row ball bearing,whether or not with impulse (encoder) ring,whether or not with antilock brake system (ABS) sensor,whether or not with mounted screws,for use in the manufacture of goods of chapter 87	0 %	—	31.12.2022
ex87088020ex87088035	1010	Upper strut insulator containing:a metal holder with three mounting screws, anda rubber bump,of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
ex87088020ex87088091	2010	Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
ex87088020ex87088091	3020	Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
ex87088099	10	Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex87089120ex87089135	2010	Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex87089120ex87089199	3030	Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:an insulating area flatness of not more than 0,1 mm,a permissible particle quantity of 0,3 mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4 mm, andnot more than 3 pores larger than 0,2 mm,of a kind used in heat exchangers for car cooling systems	0 %	p/st	31.12.2020
ex87089199ex87089997	4055	Assembly for supplying compressed air, whether or not with a resonator, comprising at least:one solid aluminium tube whether or not with mounting bracket,one flexible rubber hose, andone metal clip,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2022
ex87089310ex87089390	1010	Mechanically operated clutch for use with an elastomeric belt in a dry environment in a CVT (Continuously Variable Transmission) gear case:designed to be bolted onto a splined shaft of outer diameter 23 mm,with an overall diameter of not more than 266 mm (± 1 mm),comprised of 2 sheaves with tapered faces,sheaves having taper of 13 degrees each,having a main compression spring used to resist displacement between sheaves, andcomprised of a cam or spring to maintain proper belt tension,for use in the manufacture of all-terrain vehicles or utility task vehicles	0 %	—	31.12.2021
ex87089310ex87089390	3030	Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with:elements that activate the clutch at given rotation and generate (in this way) centrifugal force,shaft ended with 5 or more but not more than 6 degree taper,3 weights, and1 compression spring,for use in the manufacture of all-terrain or utility task vehicles	0 %	p/st	31.12.2021
ex87089420ex87089435	1020	Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex87089510ex87089599	1020	Inflatable safety cushion of high strength polyamide fibresewnfolded into three-dimensional packing form, fixed by thermal forming	0 %	p/st	31.12.2020
ex87089510ex87089599	2030	Inflatable safety cushion of high strength polyamide fibre:sewn,folded,with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,suitable for cool inflator technology	0 %	p/st	31.12.2020
ex87089910ex87089997	1060	Six-layer composite fuel tank assembly comprising of:a fuel inlet,a pump flange assembly (PFA),a ventilation with rollover valve mounted on the top of the tank, andthreated holes for PFA assembly,for use in the manufacture of all-terrain or utility task vehicles	0 %	—	31.12.2021
ex87089910ex87089997	2545	Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles	0 %	—	31.12.2023
ex87089910ex87089997	3535	Holder of front radiator or intercooler whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex87089910ex87089997	4025	Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex87089997	85	Electroplated interior or exterior parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,layers of copper, nickel and chromium,for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705	0 %	p/st	31.12.2022
ex87141090	10	Inner tubes:of SAE1541 carbon steelwith a hard chromium layer of 20 μm (+ 15 μm/– 5 μm)having a wall thickness of 1,45 mm or more, but not more than 1,5 mmhaving an elongation at break of 15 %perforatedof a kind used for the production of motorcycle fork rods	0 %	p/st	31.12.2020
ex87141090	20	Radiators of a kind used in motor bikes for fitting of attachments	0 %	p/st	31.12.2020
ex87141090	50	Suspension damper tubes:of 7050-t73 aluminium alloy,anodised on the inner surface,with a mean roughness (Ra) of the inner surface of not more than 0,4 anda maximum roughness height (Rt) of the inner surface of not more than 4,0	0 %	—	31.12.2021
ex87149110ex87149110ex87149110	233370	Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including e-bikes)	0 %	—	31.12.2023
ex87149130ex87149130ex87149130	253572	Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles	0 %	—	31.12.2023
ex87149610	10	Pedals, for use in the manufacture of bicycles	0 %	—	31.12.2020
ex87149910ex87149910	2089	Bicycle handlebars:with or without integrated stem,either made out of carbon fibres and synthetic resin or made of aluminium,for use in the manufacture of bicycles	0 %	—	31.12.2022
ex87149990	30	Seat posts, for use in the manufacture of bicycles	0 %	p/st	31.12.2020
ex90011090	10	Image reverser made up from an assembly of optical fibres	0 %	—	31.12.2023
ex90011090	30	Polymer optical fibre with:a poly(methyl methacrylate) core,a cladding of fluorinated polymer,a diameter of not more than 3,0 mm, anda length of more than 150 m,of a kind used in the manufacture of polymer fibre cables	0 %	—	31.12.2021
ex90011090ex90019000	4018	Fibre optic plates:uncoated and unpainted,of a length of 30 mm or more, but not more than 234,5 mm,of a width of 7 mm or more, but not more than 28 mm, andof a height of 0,5 mm or more, but not more than 3 mm,of a kind used in dental x-ray systems	0 %	—	31.12.2021
ex90012000	10	Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film	0 %	—	31.12.2022
ex90012000ex90019000	2055	Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut	0 %	—	31.12.2023
ex90015041ex90015049	4040	Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses	0 %	—	31.12.2022
ex90015080	30	Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses	0 %	—	31.12.2021
ex90019000	35	Rear projection screen, comprising a lenticular plastic plate	0 %	p/st	31.12.2023
ex90019000	45	Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends	0 %	p/st	31.12.2023
ex90019000	65	Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens	0 %	—	31.12.2019
ex90019000	70	Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90° and a prism pitch of 50 μm	0 %	—	31.12.2021
ex90019000	85	Light guide panel made of poly(methyl methacrylate):whether or not cut,whether or not printed,for use in the manufacture of backlight units for flat screen TVs	0 %	—	31.12.2020
ex90021100ex90021900	1510	Infrared lens with motorised focus adjustment,using wavelengths of 3 μm or more but not more than 5 μm,providing a clear picture from 50 m to infinity,with fields of vision sizes of 3° × 2,25° and 9° × 6,75 °,with a weight of not more than 230 g,with a length of not more than 88 mm,with a diameter of not more than 46 mm,athermalised,for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes	0 %	—	31.12.2020
ex90021100	20	Lenses:measuring not more than 80 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times,of a kind used for the production of visualizers or live image cameras	0 %	—	31.12.2022
ex90021100ex90021900	2520	Infrared optical unit composed of:a monocrystalline silicon lens with a diameter of 84 mm (± 0,1 mm), anda monocrystalline germanium lens with a diameter of 62 mm (± 0,05 mm),assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100ex90021900	3530	Infrared optical unit composed of:a silicon lens with a diameter of 29 mm (± 0,05 mm), anda monocrystalline calcium fluoride lens with a diameter of 26 mm (± 0,05 mm),assembled on a machined aluminum alloy support, of kind a used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100ex90021900	4540	Infrared optical unit:with a silicon lens of a diameter of 62 mm (± 0,05 mm),mounted on a machined aluminum alloy support,of a kind used for thermal cameras	0 %	—	31.12.2021
ex90021100	50	Lens unit:having a focal length of 25 mm or more but not more than 150 mm,consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm	0 %	—	31.12.2023
ex90021100ex90021900	5550	Infrared optical unit composed of:a germanium lens with a diameter of 11 mm (± 0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 14 mm (± 0,05 mm), anda silicon lens with a diameter of 17 mm (± 0,05 mm),assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100ex90021900	6560	Infrared optical unit:with a silicon lens with a diameter of 26 mm (± 0,1 mm),mounted on a machined aluminum alloy support,of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100ex90021900	7570	Infrared optical unit composed of:a germanium lens with a diameter of 19 mm (± 0,05 mm),a monocrystalline calcium fluoride lens with a diameter of 18 mm (± 0,05 mm),a germanium lens with a diameter of 20,6 mm (± 0,05 mm),assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras	0 %	—	31.12.2021
ex90021100	85	Lens assembly with:a horizontal field of view range of 50 deg or more, but not more than 200 deg,a focal length of 1,16 mm or more, but not more than 5,45 mm,a relative aperture of F/1,8 or more but not more than F/2,6,a diameter of 5 mm or more but not more than 18,5 mm,for use in the manufacture of CMOS automotive cameras	0 %	—	31.12.2019
ex90029000	30	Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates	0 %	p/st	31.12.2023
ex90029000	40	Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material	0 %	p/st	31.12.2022
ex90138090	30	Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of:one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with a drive arranged in three-dimensional structures on the semiconductor material,whether or not in a combination with one or more monolithic application-specific integrated circuits (ASIC),of a kind used for incorporation into products of Chapters 84-90 and 95	0 %	p/st	31.12.2019
ex90258040	30	Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of:a combination of one or more monolithic application-specific integrated circuits (ASIC), andat least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material	0 %	p/st	31.12.2023
ex90258040	50	Electronic semiconductor sensor for measuring at least two of the following quantities:Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,of a kind used for incorporation into products of Chapters 84-90 and 95	0 %	p/st	31.12.2019
ex90271090	10	Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing	0 %	—	31.12.2019
ex90291000	30	Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex90292031ex90299000	1020	Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
ex90303100	20	Automotive battery sensor for measuring voltage, current and temperature with:a measuring unit, voltage regulator, micro-controller and LIN-Transceiver,a battery pole terminal, LIN-connector and ground cable,for use in the manufacture of motor vehicles	0 %	—	31.12.2023
ex90328900	30	Electronic controller of electric power steering (EPS controller)	0 %	p/st	31.12.2023
ex90328900	40	Digital valve controller for controlling liquids and gases	0 %	p/st	31.12.2022
ex90328900	50	Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising:an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals,four pressure transducers,two or more pressure valves,electric interfaces, andseveral connectors for gas lines,suitable for in-situ plasma bonding processes or for multi frequency bond activating processes	0 %	—	31.12.2021
ex94019080	10	Ratchet disk of a kind used in the manufacture of reclining car seats	0 %	p/st	31.12.2020
ex94019080	60	Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles	0 %	—	31.12.2020
ex95030075ex95030095	1010	Plastic cable car scale models, whether or not with a motor, for printing	0 %	p/st	31.12.2020
ex96072010	10	Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers	0 %	—	31.12.2020
ex96072090	10	Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers	0 %	—	31.12.2020
ex96089100	10	Non-fibrous plastic pen-tips with an internal canal	0 %	—	31.12.2023
ex96089100	20	Felt tips and other porous-tips for markers, without internal canal	0 %	—	31.12.2023
ex96121010	10	Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)	0 %	—	31.12.2023

Amendments and corrections
December 31, 2021	Implicitly repealed by 32021R2278
January 1, 2019	Application - See Art 2
December 29, 2018	Entry into force - Date pub. +1 See Art 2

Council Regulation (EU) 2018/2069 of 20 December 2018 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products