Article 1A Union authorisation is granted to Ecolab Deutschland GmbH for the biocidal product family Ecolab Iodine PT3 Family with authorisation number EU-0018398-0000.The Union authorisation is valid from 11 October 2018 until 30 September 2028.The Union authorisation is subject to compliance with the SPC set out in the Annex.

Article 2This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 18 September 2018.For the CommissionThe PresidentJean-Claude JunckerANNEXSummary of product characteristics for a biocidal product familyEcolab Iodine PT3 FamilyProduct type 3 — Veterinary hygiene (Disinfectants)Authorisation number: EU-0018398-0000R4BP asset number: EU-0018398-0000PART IFIRST INFORMATION LEVEL1.ADMINISTRATIVE INFORMATION1.1.Family name

Name	Ecolab Iodine PT3 Family

1.2.Product type(s)

Product type(s)	PT03 — Veterinary hygiene (Disinfectants)

1.3.Authorisation holder

Name and address of the authorisation holder	Name	Ecolab Deutschland GmbH
	Address	Ecolab-Allee 1, 40789 Monheim, Germany
Authorisation number	EU-0018398-0000
R4BP asset number	EU-0018398-0000
Date of the authorisation	11 October 2018
Expiry date of the authorisation	30 September 2028

1.4.Manufacturer(s) of the biocidal products

Name of manufacturer	Ecolab Europe GmbH
Address of manufacturer	Richtistrasse 7, 8304 Walliselen Switzerland
Location of manufacturing sites	Ecolab Baglan, ECOLAB CONTAMINATION CONTROL BRUNEL WAY, BAGLAN ENERGY PARK, NEATH, SA11 2GA South Wales United KingdomEcolab Leeds, LOTHERTON WAY, GARFORTH, LEEDS LS25 2JY Leeds United KingdomEcolab Rovigo, Viale del Lavoro 10, 45100 Rovigo ItalyEcolab Biebesheim Nalco Deutschland Manufacturing GmbH und Co.KG, Justus-von-Liebig-Str. 11 D-64584 Biebesheim GermanyEcolab NETHERLANDS BV, NL01ECOLAB, BRUGWAL 11 3432NZ NIEUWEGEIN NetherlandsEcolab Weavergate, ECOLAB WEAVERGATE PLANT WINNINGTON AVENUE, NORTHWICH CHESHIRE CW8 3AA NORTHWICH United KingdomEcolab Mullingar, Forest Park, Mullingar Ind. Estate, Mullingar, Co. Zone C Westmeath IrelandEcolab Maribor, Ecolab d.o.o.,Vajngerlova 4 2000 Maribor SloveniaEcolab Rozzano, VIA GRANDI 9/11 20089 ROZZANO ItalyEcolab B.V.B.A, Havenlaan: 4 3980 Tessenderlo BelgiumEcolab CELRA, Nalco Española Manufacturing, SLU C/Tramuntana s/n, Polígono Industrial de Celrà 17460 CELRÀ SpainEcolab Chalons Ecolab production France SAS, BP509 Avenue de Général Patton 51006 Châlons-en-Champagne FranceEcolab Mandra, 25km Old National Road Athens Mandra, oo Attica GreeceNALCO FINLAND MANUFACTURING OY, Kivikummuntie 1 FIN-07955 Tesjoki Finland

1.5.Manufacturer(s) of the active substance(s)

Active substance	Polyvinylpyrrolidone iodine
Name of manufacturer	ISP Chemicals LLC, Affiliate of Ashland Inc.
Address of manufacturer	455 N. MAIN ST. (HWY 95) KY 42029 CALVERT CITY United States
Location of manufacturing sites	455 N. MAIN ST. (HWY 95) KY 42029 CALVERT CITY United States

Active substance	Iodine
Name of manufacturer	ACF Minera S.A.
Address of manufacturer	San Martín No 499 00 Iquique Chile
Location of manufacturing sites	Lagunas mine 00 Pozo Almonte Chile

Active substance	Iodine
Name of manufacturer	SQM S.A.
Address of manufacturer	Los Militares 4290 Piso 4 Santiago Chile
Location of manufacturing sites	Nueva Victoria plant 00 Pedro de Valdivia Chile

Active substance	Iodine
Name of manufacturer	Cosayach Nitratos S.A.
Address of manufacturer	Amunategui 178 00 Santiago Chile
Location of manufacturing sites	S.C.M. Cosayach Cala Cala 00 Pozo Almonte Chile

Active substance	Iodine
Name of manufacturer	Nihon Tennen Gas Development Co., Ltd/ Kanto Natural Gas Development Co., Ltd
Address of manufacturer	661 Mobara Chiba 297-8550 Mobara City Japan
Location of manufacturing sites	Chiba Plant, 2508 Minami-Hinata, Shirako-Machi, Chosei-Gun 299-4205 Chiba Japan

2.PRODUCT FAMILY COMPOSITION AND FORMULATION2.1.Qualitative and quantitative information on the composition of the family

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1	3
Iodine		Active substance	7553-56-2	231-442-4	0,11	0,33

2.2.Type(s) of formulation

Formulation(s)	AL — Any other liquid

PART IISECOND INFORMATION LEVEL — META SPC(S)META SPC 11.META SPC 1 ADMINISTRATIVE INFORMATION1.1.Meta SPC 1 identifier

Identifier

meta SPC 1

1.2.Suffix to the authorisation number

Number

1-1

1.3.Product type(s)

Product type(s)	PT03 — Veterinary hygiene (Disinfectants)

2.META SPC 1 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 1

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1	1
Iodine		Active substance	7553-56-2	231-442-4	0,11	0,11

2.2.Type(s) of formulation of the meta SPC 1

Formulation	AL — Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1

Hazard statements
Precautionary statements

4.AUTHORISED USE(S) OF THE META SPC 14.1.Use description

Table 1. Use # 1 – Teat dips for post-milking disinfection

Product Type	PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	BacteriaYeastsEnveloped viruses
Field(s) of use	IndoorPost-milking disinfection of teats of milk-producing animals (cows, buffaloes, goats, sheep)
Application method(s)	Manual dipping using a dip cup -3-10 ml (dipping)1-3 post-milking disinfections per day
Application rate(s) and frequency	3-10 ml (dipping)Post-milking application 1x - 3x per day (apply after every milking).Per milking event 3-10 ml of product are needed (animals with four teats).
Category(ies) of users	Professional
Pack sizes and packaging material	container, Plastic: HDPE, 0,5-1000 l

4.1.1.Use-specific instructions for useSee general directions for use of meta SPC 14.1.2.Use-specific risk mitigation measuresSee general directions for use of meta SPC 14.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 14.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 14.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 15.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC1. OF THE META SPC 15.1.Instructions for useAlways read the label or leaflet before use and follow all the instructions provided.Product to be applied post-milking by use of a dipping cup.The products must be brought to temperatures above 20 °C before use.Apply product on the whole teat and do not wipe it. Keep the animals standing for 5 min. Before the next milking, carefully clean the teats.The use of a dosing pump for filling the product into the application equipment is recommended.5.2.Risk mitigation measuresIn case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentPotential Health EffectsEyes: Health injuries are not known or expected under normal use.Skin: Health injuries are not known or expected under normal use.Ingestion: Health injuries are not known or expected under normal use.Inhalation: Health injuries are not known or expected under normal use.Chronic Exposure: Health injuries are not known or expected under normal use.First Aid Measures:Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. In case of inhalation of decomposition products in a fire, symptoms may be delayed. Get medical attention if symptoms occur.Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.Environmental emergency measures: Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer If legally allowed.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageStore between 5 °C and 25 °C and away from direct sunlight. Keep out of reach of children. Keep container tightly closed. Store in the original containers.Shelf life: 24 months6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 17.1.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	Ioklar Super Dip D
Authorisation number	EU-0018398-0001 1-1
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1
Iodine		Active substance	7553-56-2	231-442-4	0,11

7.2.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	IoKlar Superdip
Authorisation number	EU-0018398-0002 1-1
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1
Iodine		Active substance	7553-56-2	231-442-4	0,11

META SPC 21.META SPC 2 ADMINISTRATIVE INFORMATION1.1.Meta SPC 2 identifier

Identifier

meta SPC 2

1.2.Suffix to the authorisation number

Number

1-2

1.3.Product type(s)

Product type(s)	PT03 — Veterinary hygiene (Disinfectants)

2.META SPC 2 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 2

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1,35	1,35
Iodine		Active substance	7553-56-2	231-442-4	0,15	0,15

2.2.Type(s) of formulation of the meta SPC 2

Formulation	AL — Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2

Hazard statements
Precautionary statements

4.AUTHORISED USE(S) OF THE META SPC 24.1.Use description

Table 2. Use # 1 – Teat dips for post-milking disinfection

Product Type	PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	BacteriaYeastsEnveloped viruses
Field(s) of use	IndoorPost-milking disinfection of teats of milk-producing animals (cows, buffaloes, goats, sheep)
Application method(s)	Manual dipping using a dip cup
Application rate(s) and frequency	Post-milking application 1x - 3x per day (apply after every milking).Per milking event 3-10 ml of product are needed (animals with four teats).
Category(ies) of users	Professional
Pack sizes and packaging material	0,5 l – 1000 l HDPE container

4.1.1.Use-specific instructions for useSee general directions for use of meta SPC 24.1.2.Use-specific risk mitigation measuresSee general directions for use of meta SPC 24.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 24.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 24.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 25.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC2. OF THE META SPC 25.1.Instructions for useAlways read the label or leaflet before use and follow all the instructions provided.The products must be brought to temperatures above 20 °C before use.Product to be applied post-milking by use of a dipping cup.Apply product on the whole teat and do not wipe it. Keep the animals standing for 5 min. Before the next milking, carefully clean the teats.The use of a dosing pump for filling the product into the application equipment is recommended.5.2.Risk mitigation measuresIn case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentPotential Health EffectsEyes: Health injuries are not known or expected under normal use.Skin: Health injuries are not known or expected under normal use.Ingestion: Health injuries are not known or expected under normal use.Inhalation: Health injuries are not known or expected under normal use.Chronic Exposure: Health injuries are not known or expected under normal use.First Aid Measures:Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. In case of inhalation of decomposition products in a fire, symptoms may be delayed. Get medical attention if symptoms occur.Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.Environmental emergency measures: Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer If legally allowed.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageStore between 5 °C and 25 °C and away from direct sunlight. Keep out of reach of children. Keep container tightly closed. Store in the original containers.Shelf life: 24 months6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 27.1.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	Io-Shield DIoShieldMEPA Barrier DBARIOPROTECTMS Cow Udder BLOCKIodocop EXTRA
Authorisation number	EU-0018398-0003 1-2
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1,35
Iodine		Active substance	7553-56-2	231-442-4	0,15

7.2.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	IoDarkIodocop EXTRA GREENMammizan ProtectMS Cow Udder BLACK
Authorisation number	EU-0018398-0004 1-2
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1,35
Iodine		Active substance	7553-56-2	231-442-4	0,15

META SPC 31.META SPC 3 ADMINISTRATIVE INFORMATION1.1.Meta SPC 3 identifier

Identifier

meta SPC 3

1.2.Suffix to the authorisation number

Number

1-3

1.3.Product type(s)

Product type(s)	PT03 — Veterinary hygiene (Disinfectants)

2.META SPC 3 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 3

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		2,45	2,45
Iodine		Active substance	7553-56-2	231-442-4	0,27	0,27

2.2.Type(s) of formulation of the meta SPC 3

Formulation	AL — Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3

Hazard statements	Harmful to aquatic life with long lasting effects.
Precautionary statements	Avoid release to the environment.

4.AUTHORISED USE(S) OF THE META SPC 34.1.Use description

Table 3. Use # 1 – Teat dips or sprays for post-milking disinfection

Product Type	PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	BacteriaYeastsEnveloped viruses
Field(s) of use	IndoorPost-milking disinfection of teats of milk-producing animals (cows, buffaloes, goats, sheep)
Application method(s)	Dipping or spraying:Manual dipping using a dip cup orManual spraying using a trigger sprayer orManual spraying using an electronic sprayer orAutomated spraying by robot.
Application rate(s) and frequency	Post-milking application 1x – 3x per dayPer milking event 3-10 ml (dipping) to 10-15 ml (spraying) of product are needed (animals with four teats).
Category(ies) of users	Professional
Pack sizes and packaging material	0,5 l – 1000 l HDPE container

4.1.1.Use-specific instructions for useProduct to be applied by dipping or spraying on teats of milk-producing animals post-milking, using manual or automatic equipment. Post-milking: Apply product on the whole teat and do not wipe it. Keep the animals standing for 5 min. Before the next milking, carefully clean the teats.See also general instructions for use of meta SPC 3.4.1.2.Use-specific risk mitigation measuresIn case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.See also general risk mitigation measures of meta SPC 3.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 34.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 34.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 34.2.Use description

Table 4. Use # 2 – Teat dips or sprays for pre-milking disinfection

Product Type	PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	BacteriaYeasts
Field(s) of use	IndoorPre-milking disinfection of teats of milk-producing animals (cows, buffaloes, goats, sheep)
Application method(s)	Dipping or spraying:Manual dipping using a dip cup orManual spraying using a trigger sprayer orManual spraying using an electronic sprayer.
Application rate(s) and frequency	Pre-milking application 1x – 3x per dayPer milking event 3-10 ml (dipping) to 10-15 ml (spraying) of product are needed (animals with four teats).
Category(ies) of users	Professional
Pack sizes and packaging material	0,5 l – 1000 l HDPE container

4.2.1.Use-specific instructions for useProduct to be applied by dipping or spraying on teats of milk-producing animals pre-milking, using manual equipment.Pre-milking: Clean teats by wiping with cloth before disinfection. Apply product on the whole teats and leave it for 1 min. Then wipe with a single use paper or a towel.See also general instructions for use of meta SPC3.4.2.2.Use-specific risk mitigation measuresIn case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection.See also general risk mitigation measures of meta SPC3.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 34.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 34.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 35.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC3. OF THE META SPC 35.1.Instructions for useSee use-specific instructions for each use.Always read the label or leaflet before use and follow all the instructions provided.The products must be brought to temperatures above 20 °C before use.The use of a dosing pump for filling the product into the application equipment is recommended5.2.Risk mitigation measuresSee use-specific risk mitigation measures for each use.Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) for spraying application.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentPotential Health EffectsEyes: Health injuries are not known or expected under normal use.Skin: Health injuries are not known or expected under normal use.Ingestion: Health injuries are not known or expected under normal use.Inhalation: Health injuries are not known or expected under normal use.Chronic Exposure: Health injuries are not known or expected under normal use.First Aid Measures:Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. In case of inhalation of decomposition products in a fire, symptoms may be delayed. Get medical attention if symptoms occur.Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.Environmental emergency measures: Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer If legally allowed.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageStore between 5 °C and 25 °C and away from direct sunlight. Keep out of reach of children. Keep container tightly closed. Store in the original containers.Shelf life: 24 months6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 37.1.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	IoKlar MultiMEPA Iospray Plus DASTRI-IODESINTEC MH-Iodine S
Authorisation number	EU-0018398-0005 1-3
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		2,45
Iodine		Active substance	7553-56-2	231-442-4	0,27

META SPC 41.META SPC 4 ADMINISTRATIVE INFORMATION1.1.Meta SPC 4 identifier

Identifier

meta SPC 4

1.2.Suffix to the authorisation number

Number

1-4

1.3.Product type(s)

Product type(s)	PT03 — Veterinary hygiene (Disinfectants)

2.META SPC 4 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 4

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1	1
Iodine		Active substance	7553-56-2	231-442-4	0,11	0,11

2.2.Type(s) of formulation of the meta SPC 4

Formulation	AL — Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4

Hazard statements
Precautionary statements

4.AUTHORISED USE(S) OF THE META SPC 44.1.Use description

Table 5. Use # 1 – Teat dips or sprays for post-milking disinfection

Product Type	PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	BacteriaYeastsEnveloped viruses
Field(s) of use	IndoorPost-milking disinfection of teats of milk-producing animals (cows, buffaloes, goats, sheep)
Application method(s)	Dipping or spraying:Manual dipping using a dip cup orManual spraying using a trigger sprayer orManual spraying using an electronic sprayer orAutomated spraying by robot.
Application rate(s) and frequency	Post-milking application 1x - 3x per day.Per milking event 3-10 ml (dipping) to 10-15 ml (spraying) of product are needed (animals with four teats).
Category(ies) of users	Professional
Pack sizes and packaging material	0,5 l – 1000 l HDPE container

4.1.1.Use-specific instructions for useSee general directions for use of meta SPC 44.1.2.Use-specific risk mitigation measuresSee general directions for use of meta SPC 44.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 44.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 44.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 45.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC4. OF THE META SPC 45.1.Instructions for useAlways read the label or leaflet before use and follow all the instructions provided.The products must be brought to temperatures above 20 °C before use.Product to be applied by dipping or spraying on teats of milk-producing animals post-milking using manual or automatic equipment.Apply product on the whole teat and do not wipe it. Keep the animals standing for 5 min. Before the next milking, carefully clean the teats.The use of a dosing pump for filling the product into the application equipment is recommended.5.2.Risk mitigation measuresWear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) for spraying application.In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentPotential Health EffectsEyes: Health injuries are not known or expected under normal use.Skin: Health injuries are not known or expected under normal use.Ingestion: Health injuries are not known or expected under normal use.Inhalation: Health injuries are not known or expected under normal use.Chronic Exposure: Health injuries are not known or expected under normal use.First Aid Measures:Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. In case of inhalation of decomposition products in a fire, symptoms may be delayed. Get medical attention if symptoms occur.Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.Environmental emergency measures: Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer If legally allowed.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageStore between 5 °C and 25 °C and away from direct sunlight. Keep out of reach of children. Keep container tightly closed. Store in the original containers.Shelf life: 24 months6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 47.1.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	Veloucid Spray DVelouCid SprayMEPA Soft Spray DASTRI-UCSAC WINTERSPRAY
Authorisation number	EU-0018398-0006 1-4
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1
Iodine		Active substance	7553-56-2	231-442-4	0,11

META SPC 51.META SPC 5 ADMINISTRATIVE INFORMATION1.1.Meta SPC 5 identifier

Identifier

meta SPC 5

1.2.Suffix to the authorisation number

Number

1-5

1.3.Product type(s)

Product type(s)	PT03 — Veterinary hygiene (Disinfectants)

2.META SPC 5 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 5

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1	1
Iodine		Active substance	7553-56-2	231-442-4	0,11	0,11

2.2.Type(s) of formulation of the meta SPC 5

Formulation	AL — Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5

Hazard statements
Precautionary statements

4.AUTHORISED USE(S) OF THE META SPC 54.1.Use description

Table 6. Use # 1 – Teat dips for post-milking disinfection

Product Type	PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	BacteriaYeastsEnveloped viruses
Field(s) of use	IndoorPost-milking disinfection of teats of milk-producing animals (cows, buffaloes, goats, sheep)
Application method(s)	DippingManual dipping using a dip cup.
Application rate(s) and frequency	Post-milking application 1x – 3x per dayPer milking event 3-10 ml of product are needed (animals with four teats).
Category(ies) of users	Professional
Pack sizes and packaging material	0,5 l – 1000 l HDPE container

4.1.1.Use-specific instructions for useSee general directions for use of meta SPC 54.1.2.Use-specific risk mitigation measuresSee general directions for use of meta SPC 54.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 54.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 54.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 55.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC5. OF THE META SPC 55.1.Instructions for useAlways read the label or leaflet before use and follow all the instructions provided.The products must be brought to temperatures above 20 °C before use.Product to be applied post-milking by use of a dipping cup.Apply product on the whole teat and do not wipe it. Keep the animals standing for 5 min. Before the next milking, carefully clean the teats.The use of a dosing pump for filling the product into the application equipment is recommended.5.2.Risk mitigation measuresIn case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentPotential Health EffectsEyes: Health injuries are not known or expected under normal use.Skin: Health injuries are not known or expected under normal use.Ingestion: Health injuries are not known or expected under normal use.Inhalation: Health injuries are not known or expected under normal use.Chronic Exposure: Health injuries are not known or expected under normal use.First Aid Measures:Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. In case of inhalation of decomposition products in a fire, symptoms may be delayed. Get medical attention if symptoms occur.Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.Environmental emergency measures: Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer If legally allowed.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageStore between 5 °C and 25 °C and away from direct sunlight. Keep out of reach of children. Keep container tightly closed. Store in the original containers.Shelf life: 18 months6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 57.1.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	Veloucid DVelouCidMEPA Care DCremadipMS Cow Udder SEPIA
Authorisation number	EU-0018398-0007 1-5
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1
Iodine		Active substance	7553-56-2	231-442-4	0,11

META SPC 61.META SPC 6 ADMINISTRATIVE INFORMATION1.1.Meta SPC 6 identifier

Identifier

meta SPC 6

1.2.Suffix to the authorisation number

Number

1-6

1.3.Product type(s)

Product type(s)	PT03 — Veterinary hygiene (Disinfectants)

2.META SPC 6 COMPOSITION2.1.Qualitative and quantitative information on the composition of the meta SPC 6

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Common name	IUPAC name	Function	CAS number	EC number	Min	Max
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1,35	1,35
Iodine		Active substance	7553-56-2	231-442-4	0,15	0,15

2.2.Type(s) of formulation of the meta SPC 6

Formulation	AL — Any other liquid

3.HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6

Hazard statements
Precautionary statements

4.AUTHORISED USE(S) OF THE META SPC 64.1.Use description

Table 7. Use # 1 – Teat dips or sprays for post-milking disinfection

Product Type	PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	BacteriaYeastsEnveloped viruses
Field(s) of use	IndoorPost-milking disinfection of teats of milk-producing animals (cows, buffaloes, goats, sheep)
Application method(s)	Dipping or spraying:Manual dipping using a dip cup orManual spraying using a trigger sprayer orManual spraying using an electronic sprayer orAutomated spraying by robot.
Application rate(s) and frequency	Post-milking application 1x – 3x per dayPer milking event 3-10 ml (dipping) to 10-15 ml (spraying) of product are needed (animals with four teats).
Category(ies) of users	Professional
Pack sizes and packaging material	0,5 l – 1000 l HDPE container

4.1.1.Use-specific instructions for useSee general directions for use of meta SPC 64.1.2.Use-specific risk mitigation measuresSee general directions for use of meta SPC 64.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use of meta SPC 64.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use of meta SPC 64.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use of meta SPC 65.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC6. OF THE META SPC 65.1.Instructions for useAlways read the label or leaflet before use and follow all the instructions provided.The products must be brought to temperatures above 20 °C before use.Product to be applied by dipping or spraying post-milking using manual or automatic equipment.Apply product on the whole teat and do not wipe it. Keep the animals standing for 5 min. Before the next milking, carefully clean the teats.The use of a dosing pump for filling the product into the application equipment is recommended.5.2.Risk mitigation measuresWear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) for spraying applicationIn case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentPotential Health EffectsEyes: Health injuries are not known or expected under normal use.Skin: Health injuries are not known or expected under normal use.Ingestion: Health injuries are not known or expected under normal use.Inhalation: Health injuries are not known or expected under normal use.Chronic Exposure: Health injuries are not known or expected under normal use.First Aid Measures:Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. In case of inhalation of decomposition products in a fire, symptoms may be delayed. Get medical attention if symptoms occur.Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.Environmental emergency measures: Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer If legally allowed.5.4.Instructions for safe disposal of the product and its packagingAt the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageStore between 5 °C and 25 °C and away from direct sunlight. Keep out of reach of children. Keep container tightly closed. Store in the original containers.Shelf life: 24 months6.OTHER INFORMATION7.THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 67.1.Trade name(s), authorisation number and specific composition of each individual product

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Trade name(s)	MEPA Barrier Spray DIoShield SprayQUARESS-Barrier
Authorisation number	EU-0018398-0008 1-6
Polyvinylpyrrolidone iodine		Active substance	25655-41-8		1,35
Iodine		Active substance	7553-56-2	231-442-4	0,15

Commission Implementing Regulation (EU) 2018/1258 of 18 September 2018 granting a Union authorisation for the biocidal product family Ecolab Iodine PT3 Family (Text with EEA relevance.)