Article 1The Annex to Regulation (EU) No 1387/2013 is amended as follows:(1)all asterisks in the table and the endnote (*), containing the text "A newly introduced measure or a measure with amended conditions.", are deleted;(2)in the table, the rows for the products for which the CN and TARIC codes are set out in Annex I to this Regulation are deleted;(3)the rows for the products listed in Annex II to this Regulation are inserted into the table according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively.

Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2018.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 25 June 2018.For the CouncilThe PresidentN. DimovANNEX IIn the table set out in the Annex to Regulation (EU) No 1387/2013, the rows relating to suspensions for the products identified by the following CN and TARIC codes are deleted:

CN code	TARIC
ex21069092	50
ex28372000	20
ex28419030	10
ex29122900	35
ex29161400	30
ex29215990	10
ex29322090	50
ex29342080	15
ex29349990	54
ex32089019	25
ex32089091	20
ex37050090	10
ex38019000	20
ex38249992	73
ex38249996	45
ex39019080	91
ex39069090	63
ex39072099	80
ex39094000	40
ex39129010	10
ex39199080	29
ex39209990	20
ex39263000	10
ex39269097	50
ex39269097	77
ex70200010	20
ex81082000	55
ex81082000	70
ex81089030	15
ex81089030	80
ex81089050	45
ex81089060	30
ex84159000	20
ex84833032	20
ex84833038	50
ex84834090	20
ex85013100	25
ex85030091	31
ex85030099	32
ex85030099	50
ex85051100	60
ex85051990	50
ex85076000	25
ex85299092	55
ex85299092	59
ex87082910	10
ex87082990	10
ex87089510	40
ex87089599	10
ex87089910	30
ex87089997	15
ex90138090	20.

ANNEX IIIn the table set out in the Annex to Regulation (EU) No 1387/2013, the following rows are inserted according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively:

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)."

CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
"ex21069092	50	Casein protein hydrolysate consisting of:by weight 20 % or more, but not more than 70 % free amino acids, andpeptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da	0 %	—	31.12.2022
ex21069098	47	Preparation, having a moisture content of 1 % or more, but not more than 4 %, and containing by weight:15 % or more, but not more than 35 % of buttermilk,20 % (± 10 %) of lactose,20 % (± 10 %) of whey protein concentrate,15 % (± 10 %) of cheddar cheese,3 % (± 2 %) of salt,0,1 % or more, but not more than 10 % of lactic acid E270,0,1 % or more, but not more than 10 % of gum arabic E414,for use in the manufacture of products of the food and drink industry	0 %	—	31.12.2022
ex27129099	10	Blend of 1-alkenes (alpha-olefins) (CAS RN 131459-42-2) containing by weight 80 % or more of 1-alkenes of a chain length of 24 carbon atoms or more, but not exceeding 64 carbon atoms containing by weight more than 72 % 1-alkenes with more than 28 carbon atoms	0 %	—	31.12.2022
ex28419030	10	Potassium metavanadate (CAS RN 13769-43-2)	0 %	—	31.12.2022
ex28421000	50	Fluorphlogopite (CAS RN 12003-38-2)	0 %	—	31.12.2022
ex28429080	30	Aluminum trititanium dodecachloride (CAS RN 12003-13-3)	0 %	—	31.12.2022
ex29039980	60	1,1′-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1)	0 %	—	31.12.2022
ex29052990	10	Cis-hex-3-en-1-ol (CAS RN 928-96-1)	0 %	—	31.12.2022
ex29062900	50	2,2′-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5)	0 %	—	31.12.2022
ex29072900	75	Biphenyl-4,4′-diol (CAS RN 92-88-6)	0 %	—	31.12.2018
ex29122900	35	Cinnamaldehyde (CAS RN 104-55-2)	0 %	—	31.12.2022
ex29122900	45	p-Phenylbenzaldehyde (CAS RN 3218-36-8)	0 %	—	31.12.2022
ex29124900	50	2,6-dihydroxybenzaldehyde (CAS RN 387-46-2)	0 %	—	31.12.2022
ex29142900	70	2-sec-butylcyclohexanone (CAS RN 14765-30-1)	0 %	—	31.12.2022
ex29142900	80	1-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9)	0 %	—	31.12.2022
ex29153900	10	Cis-3-hexenyl acetate (CAS RN 3681-71-8)	0 %	—	31.12.2022
ex29153900	30	4-tert-butylcyclohexyl acetate (CAS RN 32210-23-4)	0 %	—	31.12.2022
ex29159070	20	Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)	0 %	—	31.12.2022
ex29162000	20	Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RNs 80657-64-3 and 80623-07-0)	0 %	—	31.12.2022
ex29183000	15	2-fluoro-5-formylbenzoic Acid (CAS RN 550363-85-4)	0 %	—	31.12.2022
ex29189990	38	Diclofop-methyl (ISO) (CAS RN 51338-27-3)	0 %	—	31.12.2022
ex29215990	10	Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8)	0 %	—	31.12.2018
ex29223900	15	2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9)	0 %	—	31.12.2022
ex29269070	15	2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0)	0 %	—	31.12.2022
ex29269070	18	Flumethrin (ISO) CAS RN 69770-45-2)	0 %	—	31.12.2022
ex29269070	33	Deltamethrin (ISO) (CAS RN 52918-63-5)	0 %	—	31.12.2022
ex29270000	25	2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)	0 %	—	31.12.2022
ex29319000	10	(3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589-57-0)	0 %	—	31.12.2022
ex29321300	20	Furfuryl Alcohol (CAS RN 98-00-0)	0 %	—	31.12.2022
ex29322090	50	L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5)	0 %	—	31.12.2022
ex29329900	23	2-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)	0 %	—	31.12.2022
ex29333999	38	(2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6)	0 %	—	31.12.2022
ex29333999	39	2,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4)	0 %	—	31.12.2022
ex29333999	51	2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8)	0 %	—	31.12.2022
ex29335995	22	6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6)	0 %	—	31.12.2022
ex29335995	24	1-(Cyclopropylcarbonyl)piperazine Hydrochloride (CAS RN 1021298-67-8)	0 %	—	31.12.2022
ex29335995	26	5-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524-64-7)	0 %	—	31.12.2022
ex29337900	25	Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)	0 %	—	31.12.2022
ex29339980	48	5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)	0 %	—	31.12.2022
ex29342080	15	Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)	0 %	—	31.12.2022
ex29349990	54	2-benzyl-2-dimethylamino-4′-morpholinobutyrophenone (CAS RN 119313-12-1)	0 %	—	31.12.2022
ex29349990	59	Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)	0 %	—	31.12.2022
ex29359090	40	Venetoclax (INN) (CAS 1257044-40-8)	0 %	—	31.12.2022
ex32041300	15	Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight	0 %	—	31.12.2022
ex32041300	25	Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight	0 %	—	31.12.2022
ex32041300	35	Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 75 % or more by weight	0 %	—	31.12.2022
ex32041300	45	Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 60 % or more by weight	0 %	—	31.12.2022
ex32041600	40	Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0):with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, andcontaining a preservative	0 %	—	31.12.2022
ex32041700	29	Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight	0 %	—	31.12.2022
ex32064970	40	Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight	0 %	—	31.12.2022
ex32089019	25	Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight	0 %	—	31.12.2022
ex39046980	89		0 %	—	31.12.2022
ex37071000	60	Sensitising emulsion, containing by weight:not more than 5 % of photoacid generator,2 % or more, but not more than 50 % of phenolic resins, andnot more than 7 % of epoxy-containing derivatives,dissolved in heptan-2-one and/or ethyllactate	0 %	—	31.12.2022
ex38019000	20	Pitch coated graphite based powder with:an average particle size of 10,8 μm or more, but not more than 13,0 μm,an iron content of less than 40 ppm,a copper content of less than 5 ppm,a nickel content of less than 5 ppm,an average surface area (N2 atmosphere) of 3,0 m2/g or more, but not more than 4,36 m2/g, anda magnetic metal impurity of less than 0,3 ppm	0 %	—	31.12.2022
ex38021000	20	Chemically activated carbon in granular form with a Butane Working Capacity of 11 g butane/100 ml or more (as determined by the ASTM D 5228 method) used for vapour absorption and desorption in emission control canisters of motor vehicles	0 %	—	31.12.2022
ex38021000	30	Chemically activated carbon in pellet (cylindrical) form, with:a diameter of 2 mm or more, but not more than 3 mm, anda Butane Working Capacity of 5 g butane/100 ml or more (as determined by the ASTM D 5228 method),used for vapour absorption and desorption in emission control canisters of motor vehicles	0 %	—	31.12.2021
ex38089390	60	Preparation in the form of tablets containing by weight:0,55 % or more, but not more than 2,50 % of 1-methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, andless than 0,05 % of each of the two impurities, 1-chloro-2-methylpropene (CAS RN 513-37-1) and 3-chloro-2-methylpropene (CAS RN 563-47-3),for coating	0 %	—	31.12.2022
ex38249993	38	Mixture of 4,4′-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4′-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9)	0 %	—	31.12.2022
ex38249996	30	Rare-earth concentrate containing by weight:cerium oxide (CAS RN 1306-38-3) of 20 % or more, but not more than 30 %,lanthanum oxide (CAS RN 1312-81-8) of 2 % or more, but not more than 10 %,yttrium oxide (CAS RN 1314-36-9) of 10 % or more, but not more than 15 %, andzirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide of not more than 65 %	0 %	—	31.12.2022
ex38249996	45	Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with:a particle size of less than 10 μm,a purity by weight of more than 98 %	0 %	—	31.12.2022
ex39019080	91	Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid	0 %	—	31.12.2018
ex39039090	38	Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1)	0 %	—	31.12.2022
ex39046980	88		0 %	—	31.12.2022
ex39069090	23	Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm	0 %	—	31.12.2022
ex39069090	43	Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)	0 %	—	31.12.2021
ex39072099	80	Isoamyl alcohol polyoxyethylene ether (CAS RN 62601-60-9)	0 %	—	31.12.2022
ex39073000	70	Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:65 % or more, but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), andnone or not more than 0,5 % of carbon black (CAS RN 1333-86-4)	0 %	—	31.12.2022
ex39074000	45	α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)	0 %	—	31.12.2018
ex39092000	10	Polymer mixture, containing by weight:60 % or more, but not more than 75 % of melamine resin (CAS RN 9003-08-1),15 % or more, but not more than 25 % of silica (CAS RN 14808-60-7 or 60676-86-0),5 % or more, but not more than 15 % of cellulose (CAS RN 9004-34-6), and1 % or more, but not more than 15 % of phenolic resin (CAS RN 25917-04-8)	0 %	—	31.12.2022
ex39129010	10	Cellulose acetate propionate, non-plasticised, in the form of powder:containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method), andof a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method)	0 %	—	31.12.2018
ex39199080	21	Polytetrafluoroethylene film:with a thickness of 50 μm or more, but not more than 155 μm,with a width of 6,30 mm or more, but not more than 585 mm,an elongation at break of not more than 200 %, andcoated on one side with a pressure sensitive silicon adhesive with a thickness of not more than 40 μm	0 %	—	31.12.2022
ex39199080	22	Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more, but not more than 160 cm	0 %	—	31.12.2019
ex39206219	05	Poly(ethylene terephthalate) film in rolls:with a thickness of 0,335 mm or more, but not more than 0,365 mm, andcoated with a gold layer with a thickness of 0,03 μm or more, but not more than 0,06 μm	0 %	—	31.12.2022
ex39206290	10		0 %	—	31.12.2022
ex39209990	20	Anisotropic conductive film, in rolls, of a width of 1,2 mm or more, but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays	0 %	—	31.12.2018
ex39211900	35	Multilayer film consisting of:30 % or more, but not more than 60 % of a microporous polypropylene layer (CAS RN 9003 07-0),20 % or more, but not more than 40 % of a microporous polyethylene layer (CAS RN 9002-88-4), and20 % or more, but not more than 40 % of a boehmite layer/coating (CAS RN 1318-23-6),for use in the manufacture of lithium-ion batteries	0 %	—	31.12.2022
ex39263000	10	Plastic cover with clips for the exterior rear-view mirror of motor vehicles	0 %	p/st	31.12.2020
ex39269097	23
ex87082910	10
ex87082990	10
ex39269097	50	Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces	0 %	p/st	31.12.2018
ex39269097	77	Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems	0 %	p/st	31.12.2021
ex40169957	30	Pin boot of a brake calliper made of vulcanised rubber with:an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,a height of 15 mm or more, but not more than 40 mm, anda ribbed design,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2022
ex53110090	10	Plain-woven fabric of paper yarns glued on a tissue paper layer:with a weight of 230 g/m2 or more, but not more than 280 g/m2, andcut into rectangles with a side length of 40 cm or more, but not more than 140 cm	0 %	—	31.12.2022
ex56031490	50	Non-woven fabric of microfibres, composed of polyester fibres with a uniform cross section with:a weight of more than 150 g/m2,a denier of 0,06 or more, but not more than 0,50 den,containing by weight 74 % or more of polyethylene terephthalate	0 %	m2	31.12.2022
ex59119099	50	Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers	0 %	—	31.12.2022
ex70200010	20	Raw material for optical elements of fused silicon dioxide with:a thickness of 10 cm or more, but not more than 40 cm, anda weight of 100 kg or more	0 %	p/st	31.12.2022
ex73269092	40	Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with:a diameter of 5752 mm or more, but not more than 5758 mm,a height of 3452 mm or more, but not more than 3454 mm,a total weight 167875 kg or more, but not more than 168125 kg,of a kind used for the fabrication of a nuclear reactor vessel	0 %	p/st	31.12.2022
ex73269098	50	Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:with a chrome coating,of a diameter of 11 mm or more, but not more than 28 mm,of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding	0 %	—	31.12.2022
ex74091900	10	Plates or sheets:with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,and containing at least one of the following:poly(tetrafluoroethylene) (CAS RN 9002-84-0),poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4),epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height,for use in the manufacture of circuit boards	0 %	—	31.12.2022
ex74102100	70		0 %	—	31.12.2022
ex74130000	20	Loudspeaker centering ring, consisting of one or more vibration dampers and minimum 2 non-insulated copper cables, therein woven or pressed of the kind used in car loudspeakers	0 %	—	31.12.2022
ex85189000	45		0 %	—	31.12.2022
ex76061220	20	Sign-plates composed of a polyethylene cellular core and outer layers of aluminium, with a total thickness of 1,8 mm or more, but not more than 4,2 mm	0 %	—	31.12.2022
ex81082000	55	Titanium alloy ingot:with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more,a weight of 680 kg or more,containing alloy elements by weight of:3 % or more, but not more than 7 % of aluminium,1 % or more, but not more than 5 % of tin,3 % or more, but not more than 5 % of zirconium,4 % or more, but not more than 8 % of molybdenum	0 %	p/st	31.12.2020
ex81082000	70	Titanium alloy slab, with:a height of 20,3 cm or more, but not more than 23,3 cm,a length of 246,1 cm or more, but not more than 289,6 cm,a width of 40,6 cm or more, but not more than 46,7 cm,a weight of 820 kg or more, but not more than 965 kg,containing alloy elements by weight of:5,2 % or more, but not more than 6,2 % of aluminium,2,5 % or more, but not more than 4,8 % of vanadium	0 %	p/st	31.12.2022
ex81089030	15	Rods and wire of an alloy of titanium with:a uniform solid cross-section in the form of a cylinder,with a diameter of 0,8 mm or more, but not more than 5 mm,an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,a silicon content by weight of 0,3 % or more, but not more than 0,6 %,a niobium content by weight of 0,1 or more, but not more than 0,3 %, andan iron content by weight of not more than 0,2 %	0 %	—	31.12.2022
ex81089030	25	Titanium-aluminium-vanadium alloy (TiAl6V4) bars, rods and wire, complying with AMS standards 4928, 4965 or 4967	0 %	—	31.12.2020
ex81089050	45	Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:a thickness of 0,4 mm or more, but not more than 100 mm,a length of not more than 14 m, anda width of not more than 4 m	0 %	—	31.12.2022
ex81089060	30	Seamless tubes and pipes of titanium or an alloy of titanium with:a diameter of 19 mm or more, but not more than 159 mm,a wall thickness of 0,4 mm or more, but not more than 8 mm, anda maximum length of 18 m	0 %	—	31.12.2022
ex84189910	70	Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles	0 %	p/st	31.12.2021
ex84811099	20	Electromagnetic pressure reducing valve with:a plunger,at least 275 mPa internal tightness,a plastic connector with 2 silver or tin pins	0 %	—	31.12.2022
ex84811099	30	Pressure reducing valves in a brass case with:a length of not more than 18 mm (± 1 mm),a width of not more than 30 mm (± 1 mm),of a kind used for incorporation in fuel delivery modules of motor vehicles	0 %	—	31.12.2022
ex84818059	30	Two-way flow control valve with housing, with:at least 5, but not more than 9 outlet holes with at least 0,110 mm, but not more than 0,134 mm diameter,at least 640 cm3/minute, but not more than 805 cm3/minute flow rate,at least 19, but not more than 300 MPa operating pressure	0 %	—	31.12.2022
ex84818059	40	Flow-control valve:made of steel,with an outlet hole with a diameter of at least 0,175 mm, but not more than 0,185 mm,with an inlet hole with a diameter of at least 0,255 mm, but not more than 0,265 mm,with chromium nitride coating,with a surface roughness of Rp 0,4	0 %	—	31.12.2022
ex84818059	50	Electromagnetic valve for quantity control with:a plunger,DLC (Diamond-like carbon) coating,a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm,a supply voltage of 12 V	0 %	—	31.12.2022
ex84818059	60	Electromagnetic valve for quantity control:with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,52 Omh, and with an inductance of at least 0,083 mH, but not more than 0,172 mH,with a supply voltage of 24 V,operating at a DC of at least 15,5 A, but not more than 16,5 A	0 %	—	31.12.2022
ex84833032	30	Bearing housing of a kind used in turbochargers:of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,with oil chambers,without bearings,with a diameter of 50 mm or more, but not more than 250 mm,with a height of 40 mm or more, but not more than 150 mm,whether or not with water chambers and connectors	0 %	p/st	31.12.2022
ex84833038	60		0 %	p/st	31.12.2022
ex84834090	20	Hydrostatic transmission with:measurements (without shafts) of not more than 154 mm × 115 mm × 108 mm,a weight of not more than 3,3 kg,a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,a torque of the output shaft of not more than 10,4 Nm,a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, andan operating temperature range of – 5 °C or more, but not more than + 40 °C,for use in the manufacture of hand-operated lawn mowers of subheading 84331190	0 %	p/st	31.12.2022
ex85013100	50	DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 9 V or more, but not more than 16 V,an output at 20 °C of 300 W or more, but not more than 750 W,a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,with or without the rotor angle position sensor of resolver type or Hall effect type,of the kind used in power steering systems for cars	0 %	—	31.12.2022
ex85030091	31	Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring	0 %	p/st	31.12.2018
ex85030099	32		0 %	p/st	31.12.2018
ex85030099	55	Stator for brushless motor, with:an internal diameter of 206,6 mm (± 0,5),an external diameter of 265,0 mm (± 0,2), anda width of 37,2 mm or more, but not more than 47,8 mm,of a kind used in the manufacture of washing machines, washer-dryers or dryers equipped with direct drive drums	0 %	p/st	31.12.2018
ex85045095	80	Self-induction coil:with one or more windings, with an inductivity per winding of no more than 62 mH, attached to one or more carrier materials,with ferrites,with one or more Negative Temperature Coefficient resistors as a temperature sensor,whether or not with insulation covers, spacers and connection cables	0 %	—	31.12.2022
ex85051100	63	Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with:an external diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation	0 %	p/st	31.12.2022
ex85051990	50	Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation:whether or not with bevelled edges,of a length of 27 mm or more, but not more than 32 mm (± 0,15 mm),of a width of 8,5 mm or more, but not more than 9,5 mm (+ 0,05 mm/– 0,09 mm),of a thickness of 5,5 mm or more, but not more than 5,8 mm (+ 0/– 0,2 mm), andof a weight of 6,1 g or more, but not more than 8,3 g	0 %	p/st	31.12.2022
ex85065030	10	Lithium manganese dioxide cell, with:a diameter of 20 mm or more, but not more than 25 mm,a length of 3 mm or more, but not more than 6 mm,a voltage of 3 V or more, but not more than 3,4 V,a capacity of 200 mAh or more, but not more than 600 mAh,an automotive test temperature range from – 40 °C to + 125 °C,for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS)	0 %	—	31.12.2022
ex85075000	40	Nickel-metal Hydride (NiMH) battery assembly, with:a voltage of 190 V or more, but not more than 210 V,a length of 220 mm or more, but not more than 280 mm,a width of 500 mm or more, but not more than 600 mm,a height of 100 mm or more, but not more than 150 mm,for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2022
ex85076000	25	Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm),a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm),a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm),a weight of 45,9 kg or 46,3 kg,a rating of 75 Ah, anda nominal voltage of 60 V	0 %	p/st	31.12.2022
ex85122000	50	Cabin overhead lamp in a plastic housing whether or not with a storage box, with an operating voltage of 8 V or more, but not more than 16 V, containing:at least two light sources,light switch,whether or not emergency call button (E-Call),whether or not panoramic roof slide switch,whether or not microphone,whether or not ultrasonic sensor (UIP sensor),for use in the manufacture of motor vehicles	0 %	—	31.12.2022
ex85123090	30	Sound alarm device for protection against burglary into the vehicle:with an operating temperature of – 45 °C or more, but not more than + 95 °C,with a voltage of 9 V or more, but not more than 16 V,in a plastic housing,whether or not with a metal holder,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
ex85261000	30	Radar sensor equipment with a control unit of blind spot detection system:with a voltage of 8 V or more, but not more than 16 V,in a plastic housing,with cable and connector,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
ex85299092	33	LCD modules combined with touch screen facilities:solely consisting of one or more TFT cells,with a diagonal measurement of the screen of 10,7 cm or more, but not more than 36 cm,with or without LED backlight,with control electronics for pixel addressing only,without an EPROM memory (Erasable Programmable Read-only Memory),with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface,used solely for installation in motor vehicles of Chapter 87	0 %	—	31.12.2022
ex85299092	39	LCD modules with:a diagonal measurement of the screen of 14,5 cm or more, but not more than 25,5 cm,an LED backlight,a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network) bus or APIX2 (Automotive Pixel Link) driver module and other active and passive components,a 6 to 8 pin connector for power supply and a 2 to 4-pin connector for LVDS (Low-voltage differential signalling)/LIN signals or an APIX2 interface or an LVDS/LIN interface for signals and power supply,whether or not in a housing,for permanent incorporation or permanent mounting into motor vehicles of Chapter 87	0 %	p/st	31.12.2020
ex85299092	55	OLED modules, consisting of:one or more TFT glass or plastic cells, containing organic material,with or without combined touch screen facilities, andone or more printed circuit boards with control electronics for pixel addressing,for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87	0 %	p/st	31.12.2019
ex85371091	55	Electronic control unit of automatic parking system with the ability to evaluate the surroundings of the car and control automatic parking:of a voltage of 5 V or more, but not more than 16 V,with programmable memory,with at least one connector,in a plastic housing,whether or not with a metal holder,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2022
ex85371091	65	Electronic control unit for optimal engine performance:with a programmable memory,with a voltage of 8 V or more, but not more than 16 V,with at least one composite connector,in a metal housing,whether or not with metal holders,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
ex85371098	85	Electronic airbag control unit:with an operating temperature of – 45 °C or more, but not more than 90 °C,with a voltage of 8 V or more, but not more than 16 V,with two connectors,in a metal housing,for use in the manufacture of motor vehicles	0 %	—	31.12.2022
ex85409100	20	Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having:a graphite carbon shield mounted in a mini-Vogel type system,separate pyrolytic carbon blocks used as heating elements, anda cathode temperature of less than 1800 K at a filament current of 1,26 A	0 %	—	31.12.2022
ex87084020	50	Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position, consisting of:cast aluminium body,differential gear,2 electrical motors and gears,with the dimensions of:a width of 300 mm or more, but not more than 350 mm,a height of 420 mm or more, but not more than 500 mm,a length of 500 mm or more, but not more than 600 mm,for use in the manufacture of motor vehicles of Chapter 87	0 %	—	31.12.2022
ex87084050	40		0 %	—	31.12.2022
ex87085020	50	Double flange bearing of 3rd generation, for motor vehicles:with double-row ball bearing,whether or not with impulse (encoder) ring,whether or not with antilock brake system (ABS) sensor,whether or not with mounted screws,for use in the manufacture of goods of Chapter 87	0 %	—	31.12.2022
ex87085055	20
ex87085091	10
ex87085099	40
ex87089910	35	Holder of front radiator or intercooler whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2021
ex87089997	35		0 %	p/st	31.12.2021
ex87149910	20	Bicycle handlebars:with or without integrated stem,made out of carbon fibres and synthetic resin,for use in the manufacture of bicycles	0 %	—	31.12.2022
ex87149910	89		0 %	—	31.12.2022
ex90138090	30	Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of:one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with a drive arranged in three-dimensional structures on the semiconductor material,whether or not in a combination with one or more monolithic application-specific integrated circuits (ASIC),of a kind used for incorporation into products of Chapters 84-90 and 95	0 %	p/st	31.12.2019

----------------------

Amendments and corrections
December 31, 2021	Implicitly repealed by 32021R2278
July 1, 2018	Application - See Art 2
June 28, 2018	Entry into force - Date pub. +1 See Art 2

Council Regulation (EU) 2018/914 of 25 June 2018 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products