| CN code | TARIC | Description | Rate of autonomous duty | Supplementary Unit | Date foreseen for mandatory review |
|---|
| "ex21069092 | 50 | Casein protein hydrolysate consisting of:- by weight 20 % or more, but not more than 70 % free amino acids, and
- peptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da
| 0 % | — | 31.12.2022 |
| ex21069098 | 47 | Preparation, having a moisture content of 1 % or more, but not more than 4 %, and containing by weight:- 15 % or more, but not more than 35 % of buttermilk,
- 20 % (± 10 %) of lactose,
- 20 % (± 10 %) of whey protein concentrate,
- 15 % (± 10 %) of cheddar cheese,
- 3 % (± 2 %) of salt,
- 0,1 % or more, but not more than 10 % of lactic acid E270,
- 0,1 % or more, but not more than 10 % of gum arabic E414,
for use in the manufacture of products of the food and drink industry | 0 % | — | 31.12.2022 |
| ex27129099 | 10 | Blend of 1-alkenes (alpha-olefins) (CAS RN 131459-42-2) containing by weight 80 % or more of 1-alkenes of a chain length of 24 carbon atoms or more, but not exceeding 64 carbon atoms containing by weight more than 72 % 1-alkenes with more than 28 carbon atoms | 0 % | — | 31.12.2022 |
| ex28419030 | 10 | Potassium metavanadate (CAS RN 13769-43-2) | 0 % | — | 31.12.2022 |
| ex28421000 | 50 | Fluorphlogopite (CAS RN 12003-38-2) | 0 % | — | 31.12.2022 |
| ex28429080 | 30 | Aluminum trititanium dodecachloride (CAS RN 12003-13-3) | 0 % | — | 31.12.2022 |
| ex29039980 | 60 | 1,1′-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1) | 0 % | — | 31.12.2022 |
| ex29052990 | 10 | Cis-hex-3-en-1-ol (CAS RN 928-96-1) | 0 % | — | 31.12.2022 |
| ex29062900 | 50 | 2,2′-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5) | 0 % | — | 31.12.2022 |
| ex29072900 | 75 | Biphenyl-4,4′-diol (CAS RN 92-88-6) | 0 % | — | 31.12.2018 |
| ex29122900 | 35 | Cinnamaldehyde (CAS RN 104-55-2) | 0 % | — | 31.12.2022 |
| ex29122900 | 45 | p-Phenylbenzaldehyde (CAS RN 3218-36-8) | 0 % | — | 31.12.2022 |
| ex29124900 | 50 | 2,6-dihydroxybenzaldehyde (CAS RN 387-46-2) | 0 % | — | 31.12.2022 |
| ex29142900 | 70 | 2-sec-butylcyclohexanone (CAS RN 14765-30-1) | 0 % | — | 31.12.2022 |
| ex29142900 | 80 | 1-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) | 0 % | — | 31.12.2022 |
| ex29153900 | 10 | Cis-3-hexenyl acetate (CAS RN 3681-71-8) | 0 % | — | 31.12.2022 |
| ex29153900 | 30 | 4-tert-butylcyclohexyl acetate (CAS RN 32210-23-4) | 0 % | — | 31.12.2022 |
| ex29159070 | 20 | Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5) | 0 % | — | 31.12.2022 |
| ex29162000 | 20 | Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RNs 80657-64-3 and 80623-07-0) | 0 % | — | 31.12.2022 |
| ex29183000 | 15 | 2-fluoro-5-formylbenzoic Acid (CAS RN 550363-85-4) | 0 % | — | 31.12.2022 |
| ex29189990 | 38 | Diclofop-methyl (ISO) (CAS RN 51338-27-3) | 0 % | — | 31.12.2022 |
| ex29215990 | 10 | Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8) | 0 % | — | 31.12.2018 |
| ex29223900 | 15 | 2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9) | 0 % | — | 31.12.2022 |
| ex29269070 | 15 | 2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0) | 0 % | — | 31.12.2022 |
| ex29269070 | 18 | Flumethrin (ISO) CAS RN 69770-45-2) | 0 % | — | 31.12.2022 |
| ex29269070 | 33 | Deltamethrin (ISO) (CAS RN 52918-63-5) | 0 % | — | 31.12.2022 |
| ex29270000 | 25 | 2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8) | 0 % | — | 31.12.2022 |
| ex29319000 | 10 | (3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589-57-0) | 0 % | — | 31.12.2022 |
| ex29321300 | 20 | Furfuryl Alcohol (CAS RN 98-00-0) | 0 % | — | 31.12.2022 |
| ex29322090 | 50 | L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5) | 0 % | — | 31.12.2022 |
| ex29329900 | 23 | 2-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8) | 0 % | — | 31.12.2022 |
| ex29333999 | 38 | (2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6) | 0 % | — | 31.12.2022 |
| ex29333999 | 39 | 2,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4) | 0 % | — | 31.12.2022 |
| ex29333999 | 51 | 2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8) | 0 % | — | 31.12.2022 |
| ex29335995 | 22 | 6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6) | 0 % | — | 31.12.2022 |
| ex29335995 | 24 | 1-(Cyclopropylcarbonyl)piperazine Hydrochloride (CAS RN 1021298-67-8) | 0 % | — | 31.12.2022 |
| ex29335995 | 26 | 5-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524-64-7) | 0 % | — | 31.12.2022 |
| ex29337900 | 25 | Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8) | 0 % | — | 31.12.2022 |
| ex29339980 | 48 | 5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2) | 0 % | — | 31.12.2022 |
| ex29342080 | 15 | Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7) | 0 % | — | 31.12.2022 |
| ex29349990 | 54 | 2-benzyl-2-dimethylamino-4′-morpholinobutyrophenone (CAS RN 119313-12-1) | 0 % | — | 31.12.2022 |
| ex29349990 | 59 | Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9) | 0 % | — | 31.12.2022 |
| ex29359090 | 40 | Venetoclax (INN) (CAS 1257044-40-8) | 0 % | — | 31.12.2022 |
| ex32041300 | 15 | Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight | 0 % | — | 31.12.2022 |
| ex32041300 | 25 | Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight | 0 % | — | 31.12.2022 |
| ex32041300 | 35 | Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 75 % or more by weight | 0 % | — | 31.12.2022 |
| ex32041300 | 45 | Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 60 % or more by weight | 0 % | — | 31.12.2022 |
| ex32041600 | 40 | Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0):- with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, and
- containing a preservative
| 0 % | — | 31.12.2022 |
| ex32041700 | 29 | Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight | 0 % | — | 31.12.2022 |
| ex32064970 | 40 | Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight | 0 % | — | 31.12.2022 |
| ex32089019 | 25 | Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight | 0 % | — | 31.12.2022 |
| ex39046980 | 89 |
| ex37071000 | 60 | Sensitising emulsion, containing by weight:- not more than 5 % of photoacid generator,
- 2 % or more, but not more than 50 % of phenolic resins, and
- not more than 7 % of epoxy-containing derivatives,
dissolved in heptan-2-one and/or ethyllactate | 0 % | — | 31.12.2022 |
| ex38019000 | 20 | Pitch coated graphite based powder with:- an average particle size of 10,8 μm or more, but not more than 13,0 μm,
- an iron content of less than 40 ppm,
- a copper content of less than 5 ppm,
- a nickel content of less than 5 ppm,
- an average surface area (N2 atmosphere) of 3,0 m2/g or more, but not more than 4,36 m2/g, and
- a magnetic metal impurity of less than 0,3 ppm
| 0 % | — | 31.12.2022 |
| ex38021000 | 20 | Chemically activated carbon in granular form with a Butane Working Capacity of 11 g butane/100 ml or more (as determined by the ASTM D 5228 method) used for vapour absorption and desorption in emission control canisters of motor vehicles | 0 % | — | 31.12.2022 |
| ex38021000 | 30 | Chemically activated carbon in pellet (cylindrical) form, with:- a diameter of 2 mm or more, but not more than 3 mm, and
- a Butane Working Capacity of 5 g butane/100 ml or more (as determined by the ASTM D 5228 method),
used for vapour absorption and desorption in emission control canisters of motor vehicles | 0 % | — | 31.12.2021 |
| ex38089390 | 60 | Preparation in the form of tablets containing by weight:- 0,55 % or more, but not more than 2,50 % of 1-methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, and
- less than 0,05 % of each of the two impurities, 1-chloro-2-methylpropene (CAS RN 513-37-1) and 3-chloro-2-methylpropene (CAS RN 563-47-3),
for coating | 0 % | — | 31.12.2022 |
| ex38249993 | 38 | Mixture of 4,4′-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4′-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9) | 0 % | — | 31.12.2022 |
| ex38249996 | 30 | Rare-earth concentrate containing by weight:- cerium oxide (CAS RN 1306-38-3) of 20 % or more, but not more than 30 %,
- lanthanum oxide (CAS RN 1312-81-8) of 2 % or more, but not more than 10 %,
- yttrium oxide (CAS RN 1314-36-9) of 10 % or more, but not more than 15 %, and
- zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide of not more than 65 %
| 0 % | — | 31.12.2022 |
| ex38249996 | 45 | Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with:- a particle size of less than 10 μm,
- a purity by weight of more than 98 %
| 0 % | — | 31.12.2022 |
| ex39019080 | 91 | Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid | 0 % | — | 31.12.2018 |
| ex39039090 | 38 | Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1) | 0 % | — | 31.12.2022 |
| ex39046980 | 88 |
| ex39069090 | 23 | Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm | 0 % | — | 31.12.2022 |
| ex39069090 | 43 | Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5) | 0 % | — | 31.12.2021 |
| ex39072099 | 80 | Isoamyl alcohol polyoxyethylene ether (CAS RN 62601-60-9) | 0 % | — | 31.12.2022 |
| ex39073000 | 70 | Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:- 65 % or more, but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and
- none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)
| 0 % | — | 31.12.2022 |
| ex39074000 | 45 | α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3) | 0 % | — | 31.12.2018 |
| ex39092000 | 10 | Polymer mixture, containing by weight:- 60 % or more, but not more than 75 % of melamine resin (CAS RN 9003-08-1),
- 15 % or more, but not more than 25 % of silica (CAS RN 14808-60-7 or 60676-86-0),
- 5 % or more, but not more than 15 % of cellulose (CAS RN 9004-34-6), and
- 1 % or more, but not more than 15 % of phenolic resin (CAS RN 25917-04-8)
| 0 % | — | 31.12.2022 |
| ex39129010 | 10 | Cellulose acetate propionate, non-plasticised, in the form of powder:- containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method), and
- of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method)
| 0 % | — | 31.12.2018 |
| ex39199080 | 21 | Polytetrafluoroethylene film:- with a thickness of 50 μm or more, but not more than 155 μm,
- with a width of 6,30 mm or more, but not more than 585 mm,
- an elongation at break of not more than 200 %, and
- coated on one side with a pressure sensitive silicon adhesive with a thickness of not more than 40 μm
| 0 % | — | 31.12.2022 |
| ex39199080 | 22 | Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more, but not more than 160 cm | 0 % | — | 31.12.2019 |
| ex39206219 | 05 | Poly(ethylene terephthalate) film in rolls:- with a thickness of 0,335 mm or more, but not more than 0,365 mm, and
- coated with a gold layer with a thickness of 0,03 μm or more, but not more than 0,06 μm
| 0 % | — | 31.12.2022 |
| ex39206290 | 10 |
| ex39209990 | 20 | Anisotropic conductive film, in rolls, of a width of 1,2 mm or more, but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays | 0 % | — | 31.12.2018 |
| ex39211900 | 35 | Multilayer film consisting of:- 30 % or more, but not more than 60 % of a microporous polypropylene layer (CAS RN 9003 07-0),
- 20 % or more, but not more than 40 % of a microporous polyethylene layer (CAS RN 9002-88-4), and
- 20 % or more, but not more than 40 % of a boehmite layer/coating (CAS RN 1318-23-6),
for use in the manufacture of lithium-ion batteries | 0 % | — | 31.12.2022 |
| ex39263000 | 10 | Plastic cover with clips for the exterior rear-view mirror of motor vehicles | 0 % | p/st | 31.12.2020 |
| ex39269097 | 23 |
| ex87082910 | 10 |
| ex87082990 | 10 |
| ex39269097 | 50 | Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces | 0 % | p/st | 31.12.2018 |
| ex39269097 | 77 | Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems | 0 % | p/st | 31.12.2021 |
| ex40169957 | 30 | Pin boot of a brake calliper made of vulcanised rubber with:- an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,
- a height of 15 mm or more, but not more than 40 mm, and
- a ribbed design,
for use in the manufacture of goods of Chapter 87 | 0 % | — | 31.12.2022 |
| ex53110090 | 10 | Plain-woven fabric of paper yarns glued on a tissue paper layer:- with a weight of 230 g/m2 or more, but not more than 280 g/m2, and
- cut into rectangles with a side length of 40 cm or more, but not more than 140 cm
| 0 % | — | 31.12.2022 |
| ex56031490 | 50 | Non-woven fabric of microfibres, composed of polyester fibres with a uniform cross section with:- a weight of more than 150 g/m2,
- a denier of 0,06 or more, but not more than 0,50 den,
- containing by weight 74 % or more of polyethylene terephthalate
| 0 % | m2 | 31.12.2022 |
| ex59119099 | 50 | Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers | 0 % | — | 31.12.2022 |
| ex70200010 | 20 | Raw material for optical elements of fused silicon dioxide with:- a thickness of 10 cm or more, but not more than 40 cm, and
- a weight of 100 kg or more
| 0 % | p/st | 31.12.2022 |
| ex73269092 | 40 | Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with:- a diameter of 5752 mm or more, but not more than 5758 mm,
- a height of 3452 mm or more, but not more than 3454 mm,
- a total weight 167875 kg or more, but not more than 168125 kg,
of a kind used for the fabrication of a nuclear reactor vessel | 0 % | p/st | 31.12.2022 |
| ex73269098 | 50 | Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:- with a chrome coating,
- of a diameter of 11 mm or more, but not more than 28 mm,
- of a length of 80 mm or more, but not more than 600 mm,
with a threaded end or a mandrel for resistance welding | 0 % | — | 31.12.2022 |
| ex74091900 | 10 | Plates or sheets:- with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,
- coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,
and containing at least one of the following:- poly(tetrafluoroethylene) (CAS RN 9002-84-0),
- poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4),
- epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height,
for use in the manufacture of circuit boards | 0 % | — | 31.12.2022 |
| ex74102100 | 70 |
| ex74130000 | 20 | Loudspeaker centering ring, consisting of one or more vibration dampers and minimum 2 non-insulated copper cables, therein woven or pressed of the kind used in car loudspeakers | 0 % | — | 31.12.2022 |
| ex85189000 | 45 |
| ex76061220 | 20 | Sign-plates composed of a polyethylene cellular core and outer layers of aluminium, with a total thickness of 1,8 mm or more, but not more than 4,2 mm | 0 % | — | 31.12.2022 |
| ex81082000 | 55 | Titanium alloy ingot:- with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more,
- a weight of 680 kg or more,
containing alloy elements by weight of:- 3 % or more, but not more than 7 % of aluminium,
- 1 % or more, but not more than 5 % of tin,
- 3 % or more, but not more than 5 % of zirconium,
- 4 % or more, but not more than 8 % of molybdenum
| 0 % | p/st | 31.12.2020 |
| ex81082000 | 70 | Titanium alloy slab, with:- a height of 20,3 cm or more, but not more than 23,3 cm,
- a length of 246,1 cm or more, but not more than 289,6 cm,
- a width of 40,6 cm or more, but not more than 46,7 cm,
- a weight of 820 kg or more, but not more than 965 kg,
containing alloy elements by weight of:- 5,2 % or more, but not more than 6,2 % of aluminium,
- 2,5 % or more, but not more than 4,8 % of vanadium
| 0 % | p/st | 31.12.2022 |
| ex81089030 | 15 | Rods and wire of an alloy of titanium with:- a uniform solid cross-section in the form of a cylinder,
- with a diameter of 0,8 mm or more, but not more than 5 mm,
- an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,
- a silicon content by weight of 0,3 % or more, but not more than 0,6 %,
- a niobium content by weight of 0,1 or more, but not more than 0,3 %, and
- an iron content by weight of not more than 0,2 %
| 0 % | — | 31.12.2022 |
| ex81089030 | 25 | Titanium-aluminium-vanadium alloy (TiAl6V4) bars, rods and wire, complying with AMS standards 4928, 4965 or 4967 | 0 % | — | 31.12.2020 |
| ex81089050 | 45 | Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:- a thickness of 0,4 mm or more, but not more than 100 mm,
- a length of not more than 14 m, and
- a width of not more than 4 m
| 0 % | — | 31.12.2022 |
| ex81089060 | 30 | Seamless tubes and pipes of titanium or an alloy of titanium with:- a diameter of 19 mm or more, but not more than 159 mm,
- a wall thickness of 0,4 mm or more, but not more than 8 mm, and
- a maximum length of 18 m
| 0 % | — | 31.12.2022 |
| ex84189910 | 70 | Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles | 0 % | p/st | 31.12.2021 |
| ex84811099 | 20 | Electromagnetic pressure reducing valve with:- a plunger,
- at least 275 mPa internal tightness,
- a plastic connector with 2 silver or tin pins
| 0 % | — | 31.12.2022 |
| ex84811099 | 30 | Pressure reducing valves in a brass case with:- a length of not more than 18 mm (± 1 mm),
- a width of not more than 30 mm (± 1 mm),
of a kind used for incorporation in fuel delivery modules of motor vehicles | 0 % | — | 31.12.2022 |
| ex84818059 | 30 | Two-way flow control valve with housing, with:- at least 5, but not more than 9 outlet holes with at least 0,110 mm, but not more than 0,134 mm diameter,
- at least 640 cm3/minute, but not more than 805 cm3/minute flow rate,
- at least 19, but not more than 300 MPa operating pressure
| 0 % | — | 31.12.2022 |
| ex84818059 | 40 | Flow-control valve:- made of steel,
- with an outlet hole with a diameter of at least 0,175 mm, but not more than 0,185 mm,
- with an inlet hole with a diameter of at least 0,255 mm, but not more than 0,265 mm,
- with chromium nitride coating,
- with a surface roughness of Rp 0,4
| 0 % | — | 31.12.2022 |
| ex84818059 | 50 | Electromagnetic valve for quantity control with:- a plunger,
- DLC (Diamond-like carbon) coating,
- a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm,
- a supply voltage of 12 V
| 0 % | — | 31.12.2022 |
| ex84818059 | 60 | Electromagnetic valve for quantity control:- with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,52 Omh, and with an inductance of at least 0,083 mH, but not more than 0,172 mH,
- with a supply voltage of 24 V,
- operating at a DC of at least 15,5 A, but not more than 16,5 A
| 0 % | — | 31.12.2022 |
| ex84833032 | 30 | Bearing housing of a kind used in turbochargers:- of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,
- with oil chambers,
- without bearings,
- with a diameter of 50 mm or more, but not more than 250 mm,
- with a height of 40 mm or more, but not more than 150 mm,
- whether or not with water chambers and connectors
| 0 % | p/st | 31.12.2022 |
| ex84833038 | 60 |
| ex84834090 | 20 | Hydrostatic transmission with:- measurements (without shafts) of not more than 154 mm × 115 mm × 108 mm,
- a weight of not more than 3,3 kg,
- a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,
- a torque of the output shaft of not more than 10,4 Nm,
- a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, and
- an operating temperature range of – 5 °C or more, but not more than + 40 °C,
for use in the manufacture of hand-operated lawn mowers of subheading 84331190 | 0 % | p/st | 31.12.2022 |
| ex85013100 | 50 | DC motors, brushless, with:- an external diameter of 80 mm or more, but not more than 200 mm,
- a supply voltage of 9 V or more, but not more than 16 V,
- an output at 20 °C of 300 W or more, but not more than 750 W,
- a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,
- a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,
- with or without the rotor angle position sensor of resolver type or Hall effect type,
of the kind used in power steering systems for cars | 0 % | — | 31.12.2022 |
| ex85030091 | 31 | Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring | 0 % | p/st | 31.12.2018 |
| ex85030099 | 32 |
| ex85030099 | 55 | Stator for brushless motor, with:- an internal diameter of 206,6 mm (± 0,5),
- an external diameter of 265,0 mm (± 0,2), and
- a width of 37,2 mm or more, but not more than 47,8 mm,
of a kind used in the manufacture of washing machines, washer-dryers or dryers equipped with direct drive drums | 0 % | p/st | 31.12.2018 |
| ex85045095 | 80 | Self-induction coil:- with one or more windings, with an inductivity per winding of no more than 62 mH, attached to one or more carrier materials,
- with ferrites,
- with one or more Negative Temperature Coefficient resistors as a temperature sensor,
- whether or not with insulation covers, spacers and connection cables
| 0 % | — | 31.12.2022 |
| ex85051100 | 63 | Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with:- an external diameter of not more than 45 mm,
- a height of not more than 45 mm,
of a kind used in the manufacture of permanent magnets after magnetisation | 0 % | p/st | 31.12.2022 |
| ex85051990 | 50 | Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation:- whether or not with bevelled edges,
- of a length of 27 mm or more, but not more than 32 mm (± 0,15 mm),
- of a width of 8,5 mm or more, but not more than 9,5 mm (+ 0,05 mm/– 0,09 mm),
- of a thickness of 5,5 mm or more, but not more than 5,8 mm (+ 0/– 0,2 mm), and
- of a weight of 6,1 g or more, but not more than 8,3 g
| 0 % | p/st | 31.12.2022 |
| ex85065030 | 10 | Lithium manganese dioxide cell, with:- a diameter of 20 mm or more, but not more than 25 mm,
- a length of 3 mm or more, but not more than 6 mm,
- a voltage of 3 V or more, but not more than 3,4 V,
- a capacity of 200 mAh or more, but not more than 600 mAh,
- an automotive test temperature range from – 40 °C to + 125 °C,
for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS) | 0 % | — | 31.12.2022 |
| ex85075000 | 40 | Nickel-metal Hydride (NiMH) battery assembly, with:- a voltage of 190 V or more, but not more than 210 V,
- a length of 220 mm or more, but not more than 280 mm,
- a width of 500 mm or more, but not more than 600 mm,
- a height of 100 mm or more, but not more than 150 mm,
for use in the manufacture of motor vehicles of Chapter 87 | 0 % | — | 31.12.2022 |
| ex85076000 | 25 | Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:- a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm),
- a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm),
- a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm),
- a weight of 45,9 kg or 46,3 kg,
- a rating of 75 Ah, and
- a nominal voltage of 60 V
| 0 % | p/st | 31.12.2022 |
| ex85122000 | 50 | Cabin overhead lamp in a plastic housing whether or not with a storage box, with an operating voltage of 8 V or more, but not more than 16 V, containing:- at least two light sources,
- light switch,
- whether or not emergency call button (E-Call),
- whether or not panoramic roof slide switch,
- whether or not microphone,
- whether or not ultrasonic sensor (UIP sensor),
for use in the manufacture of motor vehicles | 0 % | — | 31.12.2022 |
| ex85123090 | 30 | Sound alarm device for protection against burglary into the vehicle:- with an operating temperature of – 45 °C or more, but not more than + 95 °C,
- with a voltage of 9 V or more, but not more than 16 V,
- in a plastic housing,
- whether or not with a metal holder,
for use in the manufacture of motor vehicles | 0 % | — | 31.12.2022 |
| ex85261000 | 30 | Radar sensor equipment with a control unit of blind spot detection system:- with a voltage of 8 V or more, but not more than 16 V,
- in a plastic housing,
- with cable and connector,
for use in the manufacture of motor vehicles | 0 % | — | 31.12.2022 |
| ex85299092 | 33 | LCD modules combined with touch screen facilities:- solely consisting of one or more TFT cells,
- with a diagonal measurement of the screen of 10,7 cm or more, but not more than 36 cm,
- with or without LED backlight,
- with control electronics for pixel addressing only,
- without an EPROM memory (Erasable Programmable Read-only Memory),
- with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface,
used solely for installation in motor vehicles of Chapter 87 | 0 % | — | 31.12.2022 |
| ex85299092 | 39 | LCD modules with:- a diagonal measurement of the screen of 14,5 cm or more, but not more than 25,5 cm,
- an LED backlight,
- a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network) bus or APIX2 (Automotive Pixel Link) driver module and other active and passive components,
- a 6 to 8 pin connector for power supply and a 2 to 4-pin connector for LVDS (Low-voltage differential signalling)/LIN signals or an APIX2 interface or an LVDS/LIN interface for signals and power supply,
- whether or not in a housing,
for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 | 0 % | p/st | 31.12.2020 |
| ex85299092 | 55 | OLED modules, consisting of:- one or more TFT glass or plastic cells, containing organic material,
- with or without combined touch screen facilities, and
- one or more printed circuit boards with control electronics for pixel addressing,
for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87 | 0 % | p/st | 31.12.2019 |
| ex85371091 | 55 | Electronic control unit of automatic parking system with the ability to evaluate the surroundings of the car and control automatic parking:- of a voltage of 5 V or more, but not more than 16 V,
- with programmable memory,
- with at least one connector,
- in a plastic housing,
- whether or not with a metal holder,
for use in the manufacture of goods of Chapter 87 | 0 % | — | 31.12.2022 |
| ex85371091 | 65 | Electronic control unit for optimal engine performance:- with a programmable memory,
- with a voltage of 8 V or more, but not more than 16 V,
- with at least one composite connector,
- in a metal housing,
- whether or not with metal holders,
for use in the manufacture of motor vehicles | 0 % | — | 31.12.2022 |
| ex85371098 | 85 | Electronic airbag control unit:- with an operating temperature of – 45 °C or more, but not more than 90 °C,
- with a voltage of 8 V or more, but not more than 16 V,
- with two connectors,
- in a metal housing,
for use in the manufacture of motor vehicles | 0 % | — | 31.12.2022 |
| ex85409100 | 20 | Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having:- a graphite carbon shield mounted in a mini-Vogel type system,
- separate pyrolytic carbon blocks used as heating elements, and
- a cathode temperature of less than 1800 K at a filament current of 1,26 A
| 0 % | — | 31.12.2022 |
| ex87084020 | 50 | Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position, consisting of:- cast aluminium body,
- differential gear,
- 2 electrical motors and gears,
with the dimensions of:- a width of 300 mm or more, but not more than 350 mm,
- a height of 420 mm or more, but not more than 500 mm,
- a length of 500 mm or more, but not more than 600 mm,
for use in the manufacture of motor vehicles of Chapter 87 | 0 % | — | 31.12.2022 |
| ex87084050 | 40 |
| ex87085020 | 50 | Double flange bearing of 3rd generation, for motor vehicles:- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (ABS) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of Chapter 87 | 0 % | — | 31.12.2022 |
| ex87085055 | 20 |
| ex87085091 | 10 |
| ex87085099 | 40 |
| ex87089910 | 35 | Holder of front radiator or intercooler whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2021 |
| ex87089997 | 35 |
| ex87149910 | 20 | Bicycle handlebars:- with or without integrated stem,
- made out of carbon fibres and synthetic resin,
for use in the manufacture of bicycles | 0 % | — | 31.12.2022 |
| ex87149910 | 89 |
| ex90138090 | 30 | Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of:- one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with a drive arranged in three-dimensional structures on the semiconductor material,
- whether or not in a combination with one or more monolithic application-specific integrated circuits (ASIC),
of a kind used for incorporation into products of Chapters 84-90 and 95 | 0 % | p/st | 31.12.2019 |