Article 1The Annex to Regulation (EU) No 1387/2013 is amended as follows:(1)the rows for the products listed in Annex I to this Regulation are inserted following the order of the CN codes indicated in the first column of the table in the Annex to Regulation (EU) No 1387/2013;(2)the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union.It shall apply from 1 July 2017.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 20 June 2017.For the CouncilThe PresidentH. DalliANNEX I

CN code	TARIC	Description	Rate of autonomous duty	Supplementary Unit	Date foreseen for mandatory review
*ex28183000	30	Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)	0 %	—	31.12.2018
ex28257000	20	Molybdic Acid (CAS RN 7782-91-4)	0 %	—	31.12.2021
*ex28421000	40	Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (2)	0 %	—	31.12.2021
*ex29051100ex29051900	2035	Methyl methanesulphonate (CAS RN 66-27-3)	0 %	—	31.12.2021
ex29052200	20	3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)	0 %	—	31.12.2021
ex29093090	15	{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)	0 %	—	31.12.2021
ex29093090	25	1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane	0 %	—	31.12.2021
*ex29096000	40	1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)	0 %	—	31.12.2017
ex29121900	10	Undecanal (CAS RN 112-44-7)	0 %	—	31.12.2021
ex29151200	10	Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)	0 %	—	31.12.2021
*ex29161400	30	Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)	0 %	—	31.12.2020
ex29163990	33	Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)	0 %	—	31.12.2021
ex29163990	73	(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)	0 %	—	31.12.2021
*ex29202900ex29209070	5050	Fosetyl-aluminium (CAS RN 39148-24-8)	0 %	—	31.12.2018
*ex29202900ex29209070	6040	Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (2)	0 %	—	31.12.2021
ex29221900	40	(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)	0 %	—	31.12.2021
ex29242970	30	Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)	0 %	—	31.12.2021
ex29242970	50	N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)	0 %	—	31.12.2021
ex29269070	30	4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)	0 %	—	31.12.2021
*ex29319000	05	Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN	0 %	—	31.12.2020
*ex29321400ex29400000	1040	1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)	0 %	—	31.12.2019
ex29329900	13	(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)	0 %	—	31.12.2021
ex29329900	18	4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)	0 %	—	31.12.2021
ex29331990	45	5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)	0 %	—	31.12.2021
ex29331990	55	5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)	0 %	—	31.12.2021
ex29332990	75	2,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)	0 %	—	31.12.2021
ex29333999	10	2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)	0 %	—	31.12.2021
ex29333999	33	5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)	0 %	—	31.12.2021
ex29333999	41	2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)	0 %	—	31.12.2021
ex29333999	46	Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (2)	0 %	—	31.12.2021
*ex29335995ex29339980	8851	Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (2)	0 %	—	31.12.2021
ex29339980	42	(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)	0 %	—	31.12.2021
ex29339980	44	(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)	0 %	—	31.12.2021
*ex29339980	53	Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5)	0 %	—	31.12.2018
*ex29339980	72	1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)	0 %	—	31.12.2018
ex29349990	46	4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)	0 %	—	31.12.2021
ex29349990	47	Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (2)	0 %	—	31.12.2021
ex29349990	49	Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)	0 %	—	31.12.2021
ex29349990	53	4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)	0 %	—	31.12.2021
ex29359090	30	6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)	0 %	—	31.12.2021
*ex32041600	30	Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:Colourant Reactive Yellow 201 (CAS RN 27624-67-5),1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)	0 %	—	31.12.2019
ex32041700	22	Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight	0 %	—	31.12.2021
*ex32041700	24	Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight	0 %	—	31.12.2018
*ex32159070	30	Disposable cartridge ink, containing by weight:1 % or more, but not more than 10 % of amorphous silicon dioxide or3,8 % or more of dye C.I. Solvent Black 7 in organic solventsfor use in the marking of integrated circuits (2)	0 %	—	31.12.2018
*ex35069110ex35069190	5050	Preparation containing by weight:15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and10 % or more but not more than 30 % of pinene polymers or pentadiene copolymersdissolved in:Methyl ethyl ketone (CAS RN 78-93-3)Heptane (CAS RN 142-82-5), andToluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)	0 %	—	31.12.2020
ex38112100	11	Dispersing agent and oxidation inhibitor containing:o-amino polyisobutylenephenol (CAS RN 78330-13-9),more than 30 % by weight but not more than 50 % by weight of mineral oils,used in the manufacture of blends of additives for lubricating oils (2)	0 %	—	31.12.2021
*ex38112100	19	Additives containing:a polyisobutylene succinimide based mixture, andmore than 30 % but not more than 50 % by weight of mineral oils,having a total base number of more than 40, for use in the manufacture of lubricating oils (2)	0 %	—	31.12.2019
ex38112900	75	Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (2)	0 % (2)	—	31.12.2021
ex38119000	50	Corrosion inhibitor containing:polyisobutenyl succinic acid andmore than 5 % and not more than 20 % by weight of mineral oilsfor use in the manufacture of blends of additives for fuels (2)	0 %	—	31.12.2021
*ex38159090	40	Catalyst:containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mmfor use in the manufacture of acrylic acid (2)	0 %	—	31.12.2018
ex38249992	25	Preparation containing by weight:25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)	0 %	—	31.12.2021
ex38249992	27	4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent	0 %	—	31.12.2021
ex38249992	30	Aqueous solution of caesium formate and potassium formate containing by weight:1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), andwhether or not containing not more than 9 % of additives	0 %	—	31.12.2021
*ex38249992	40	Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent	0 %	—	31.12.2020
*ex38249992	69	Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) andnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)	0 %	—	31.12.2020
ex38249993	45	Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:not more than 20 % of disodium sulphate, andnot more than 10 % of sodium chloride	0 %	—	31.12.2021
ex38249996	70	Powder containing by weight:28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)	0 %	—	31.12.2021
ex38249996	74	Mixture with a non-stoichiometric composition:with a crystalline structure,with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm	0 %	—	31.12.2021
ex38249996	80	Mixture consisting of:64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) andnot more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)	0 %	—	31.12.2021
*ex39011010ex39019080	2050	High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, witha melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min anda density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 anda vicat softening temperature of min. 94 °C	0 %	—	31.12.2019
ex39069090	53	Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:75 % or more but not more than 85 % of polyacrylamide and15 % or more but not more than 25 % of polyethylene glycol	0 %	—	31.12.2021
ex39069090	63	Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5)	0 %	—	31.12.2021
ex39100000	45	Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8)	0 %	—	31.12.2021
ex39100000	55	Preparation containing by weight:55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)	0 %	—	31.12.2021
*ex39139000	30	Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350000	0 %	—	31.12.2018
ex39209959	70	Tetrafluoroethylene film, put up in rolls, with:a thickness of 50 μm,a melting point of 260 °C, anda specific gravity of 1,75 (ASTM D792)for use in the manufacture of semiconductor devices (2)	0 %	—	31.12.2021
*ex39211310	10	Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092	0 %	—	31.12.2018
ex39211900	50	Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:a total thickness of more than 0,05 mm but not more than 0,20 mm,a water entry pressure between 5 and 200 kPa according to ISO 811, andan air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5	0 %	—	31.12.2021
*ex39231090	10	Photomask or wafer compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage andwith or without a gasket seal,of a kind used in the photolithography or other semiconductor production to house photomasks or wafers	0 %	—	31.12.2021
*ex39263000ex87082910ex87082990	101010	Plastic cover with cips for the exterior rear-view mirror of motor vehicles	0 %	p/st	31.12.2020
*ex39269097	20	Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls	0 %	p/st	31.12.2019
ex39269097ex85129090	7710	Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems	0 %	p/st	31.12.2021
ex40169957	10	Air intake hose for air supply to the combustion part of the engine comprising at least:one flexible rubber hose,one plastic hose, andmetal clips,whether or not a resonatorfor use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
ex40169957	20	Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
*ex59119099ex84219990	3092	Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more	0 %	—	31.12.2018
*ex59119099	40	Multi-layered non-woven polyester polishing pads, impregnated with polyurethane	0 %	—	31.12.2019
ex68053000	10	Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (2)	0 %	—	31.12.2021
ex73181900	30	Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
*ex74101100ex85079080ex85459090	106030	Roll of laminate foil of graphite and copper, with:a width of 610 mm or more but not more than 620 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric rechargeable batteries (2)	0 %	—	31.12.2021
*ex76071190ex76071190	4757	Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %	0 %	—	31.12.2021
*ex76071990ex85079080	1080	Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:a width of 595 mm or more but not more than 605 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (2)	0 %	—	31.12.2021
*ex76169910ex87089910ex87089997	306050	Aluminium engine bracket, with dimensions of:height of more than 10 mm but not more than 200 mmwidth of more than 10 mm but not more than 200 mmlength of more than 10 mm but not more than 200 mmequipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:internal porosity not more than 1 mm;outer porosity not more than 2 mm;Rockwell hardness HRB 10 or moreof a kind used in the production of suspensions systems for engines in motor vehicles	0 %	p/st	31.12.2019
*ex81089030	20	Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 87141040 (2)	0 %	—	31.12.2017
*ex81089050	10	Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 871410 (2)	0 %	—	31.12.2018
*ex81089050	35	Plates, sheets and strips of an alloy of titanium	0 %	—	31.12.2021
*ex83016000ex84139100ex84199085ex84389000ex84689000ex84769090ex84799070ex84819000ex85030099ex85159080ex85369095ex85371098ex87089120ex87089199ex87089910ex87089997	20403020202083307030957010205040	Keypads of silicone or plastic,whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,whether or not printed or surface treated,whether or not with electrical conducting elements,whether or not with keypads foil glued on the keyboard,whether or not with protective foil,single or multilayer	0 %	p/st	31.12.2020
*ex84099100ex84099900	3050	Exhaust manifold with spiral-shaped gas turbine turbocharger component with:a heat-resistance of not more than 1050 °C, anda turbine wheel hole diameter of 30 mm or more, but not more than 110 mm	0 %	p/st	31.12.2018
ex84099900	40	Plastic or aluminum cylinder head cover with:a camshaft position sensor (CMPS),metal brackets for mounting on an engine, andtwo or more gaskets,for use in the manufacture of engines of motor vehicles (2)	0 %	p/st	31.12.2021
ex84119900	65	Spiral-shaped gas turbine turbocharger component:with a heat-resistance of not more than 1050 °C, andwith a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm	0 %	p/st	31.12.2021
ex84133020	30	Single-cylinder radial-piston high pressure pump for gasoline direct injection with:an operating pressure of 200 bar or more, but not more than 350 bar,a flow control, anda pressure relief valve,for use in the manufacture of engines of motor vehicles (2)	0 %	—	31.12.2021
ex84799070	87	Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (2)	0 %	p/st	31.12.2021
ex84818059	20	Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (2)	0 %	p/st	31.12.2021
ex84842000	10	Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (2)	0 %	p/st	31.12.2021
ex85011099	56	DC Motor:with a speed rotation of not more than 7000 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximum power of 13,78 W (at 3,09 A),with a specified temperature range from – 40 °C to 160 °C,with a gear connection,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 100 Nm	0 %	—	31.12.2021
ex85011099	58	DC Motor:with a speed rotation of not more than 6500 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximal power below than 20 W,with a specified temperature range from – 40 °C to 160 °C,with a worm gear drive,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 75 Nm	0 %	—	31.12.2021
*ex85011099	65	Electric turbocharger actuator, with:a DC motor,an integrated gear mechanism,a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 25 mm,with or without an on-board diagnostics interface	0 %	—	31.12.2020
*ex85043180	50	Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (2)	0 %	—	31.12.2021
*ex85044090	25	Direct current to direct current converterwithout housing orwith housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing	0 %	p/st	31.12.2021
ex85045095	70	Solenoid coil with:a rated power of more than 10 W but not more than 15 W,an insulation resistance of 100 M Ohms or more,a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,a rated current of not more than 1,22 A,a rated voltage of not more than 25 V	0 %	p/st	31.12.2021
*ex85051100	65	Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section havinga length of not more than 140 mm,a width of not more than 90 mm, anda thickness of not more than 55 mm,or in the shape of curved rectangle (tile type) havinga length of not more than 75 mm,a width of not more than 40 mm,a thickness of not more than 7 mm, anda radius of curvature of more than 86 mm but not more than 241 mmor in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre	0 %	p/st	31.12.2018
*ex85051100	75	A quarter sleeve intended to become permanent magnet after magnetization,consisting of at least neodymium, iron and boron,with a width of 9,1 mm or more but not more than 10,5 mm,with a length of 20 mm or more but not more than 30,1 mm,of a kind used on rotors for the manufacture of fuel pumps	0 %	p/st	31.12.2019
*ex85079080	70	Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (± 0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric rechargeable batteries (2)	0 %	p/st	31.12.2021
ex85184080	93	Audio power amplifier with:an output power of 50 W,an operating voltage of more than 9 V but not more than 16 V,an electrical impedance of not more than 4 Ohm,a sensitivity of more than 80 dBin a metal housingfor use in the manufacture of motor vehicles (2)	0 %	p/st	31.12.2021
*ex85229080ex85299092	3057	Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (2)	0 %	p/st	31.12.2021
*ex85299065ex85299092	6553	Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module	0 %	p/st	31.12.2020
*ex85299092	59	LCD modules with:a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,a LED backlight,a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components,6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface,whether or not in a housing,for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (2)	0 %	p/st	31.12.2020
*ex85299092	63	LCD modulewith a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,with or without a touch screen,with an LED backlight,with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,with a plug for power supply and CAN and LVDS interfaces,with or without electronic components for dynamic adjustments of colour,in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,suitable for installation in motor vehicles of Chapter 87 (2)	0 %	p/st	31.12.2020
*ex85299092	67	Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with or without a touch screen,with backlight, micro-controller,with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,whether or not with haptic and acoustical feedback,for use in the manufacture of vehicles of Chapter 87 (2)	0 %	p/st	31.12.2020
*ex85369095	20	Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V	0 %	p/st	31.12.2020
*ex85369095	92	Metallic stamped frame with connections	0 %	p/st	31.12.2018
*ex85369095ex85444993	9410	Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements	0 %	p/st	31.12.2018
ex85371098	65	Lever for control module under the steering wheel:with one or more single or multi-positional electrical switches (push-button, rotary or other),whether or not equipped with printed circuit boards and electrical cables,for a voltage of 9 V or more but not more than 16 V,of a kind used in the manufacture of motor vehicles of Chapter 87	0 %	p/st	31.12.2021
ex85371098	75	Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:an antenna,a connector,a metal holder,for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
*ex85371098	92	Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors	0 %	p/st	31.12.2018
ex85389099	60	Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87	0 %	p/st	31.12.2021
ex85437090	15	Laminated electrochromic film consisting of:two outer layers of polyester,a middle layer of acrylic polymer and silicone, andtwo electric connection terminals	0 %	—	31.12.2021
*ex85437090	33	High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing	0 %	—	31.12.2021
ex85444290	80	12-wire connecting cable containing two connectorsof a voltage of 5 V,with a length of not more than 300 mmfor use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
ex87081010ex87081090	1010	Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
*ex87083010ex87083091ex87083099	206010	Motor powered brake actuation unitwith a rating of 13,5 V (± 0,5 V) anda ball screw mechanism to control brake fluid pressure in the master cylinderfor use in the manufacture of electric motor vehicles (2)	0 %	p/st	31.12.2019
*ex87083010ex87083091	4030	Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
*ex87083010ex87083091	5010	Drum type parking brake:operating within the service brake disk,with a diameter of 170 mm or more but not more than 195 mmfor use in the manufacture of motor vehicles (2)	0 %	p/st	31.12.2021
*ex87083010ex87083091	6020	Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2019
*ex87083010ex87083091	7040	Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
*ex87084020ex87084050	2010	Automatic hydrodynamic gearboxwith a hydraulic torque converter,without transfer box and cardan shaft,whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 87 (2)	0 %	p/st	31.12.2020
*ex87085020ex87085055	1010	Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703	0 %	p/st	31.12.2020
*ex87085020ex87085099	2010	Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middleof a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg	0 %	p/st	31.12.2020
*ex87085020ex87085099ex87089910ex87089997	30202070	Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least:two electro-magnetic one direction clutches, working in opposite sides,an input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, anda coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth splinefor use in the manufacture of all-terrain vehicles or utility task vehicles (2)	0 %	—	31.12.2021
*ex87088020ex87088035	1010	Upper strut insulator containinga metal holder with three mounting screws, anda rubber bumpof a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
*ex87088020ex87088091	2010	Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
*ex87088020ex87088091	3020	Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
ex87088099	10	Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
*ex87089120ex87089135	2010	Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
*ex87089120ex87089199	3030	Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:an insulating area flatness of not more than 0,1 mm,a permissible particle quantity of 0,3 mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4 mm, andnot more than 3 pores larger than 0,2 mmof a kind used in heat exchangers for car cooling systems	0 %	p/st	31.12.2020
*ex87089420ex87089435	1020	Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2019
*ex87089510ex87089599	4010	Front passenger airbag composed of:a metal housing with at least six mounting brackets,an embedded safety cushion,a cartridge filled with compressed gasof a kind used in the manufacture of goods of Chapter 87	0 %	p/st	31.12.2020
ex87089910ex87089997	3015	Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
ex87089910ex87089997	4025	Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (2)	0 %	p/st	31.12.2021
*ex87149130ex87149130ex87149130	253572	Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (2)	0 %	—	31.12.2018
*ex90138090	20	Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor materialof a kind used for incorporation into products of Chapters 84 to 90 and 95	0 %	p/st	31.12.2019

ANNEX II

CN code	TARIC
ex28183000	30
ex28421000	40
ex29051100	20
ex29096000	20
ex29161400	30
ex29209070	40
ex29209070	50
ex29319000	05
ex29335995	88
ex29339980	53
ex29339980	72
ex29400000	40
ex32041600	20
ex32041700	67
ex32159070	30
ex35069110	50
ex35069190	50
ex38112100	57
ex38159090	40
ex38249992	21
ex38249992	24
ex38249992	69
ex39011010	20
ex39019080	50
ex39139000	92
ex39211310	10
ex39231000	10
ex39263000	10
ex39269097	20
ex59119090	30
ex59119090	40
ex74101100	10
ex76071190	40
ex76071990	10
ex76169910	30
ex81089030	20
ex81089050	10
ex81089050	25
ex83016000	20
ex84099100	65
ex84099900	30
ex84119900	70
ex84139100	40
ex84199085	30
ex84219900	92
ex84389000	20
ex84689000	20
ex84769010	20
ex84769090	20
ex84799070	83
ex84819000	30
ex85011099	55
ex85030099	70
ex85043180	50
ex85044090	20
ex85051100	33
ex85051100	45
ex85079080	60
ex85079080	70
ex85079080	80
ex85159080	30
ex85229080	30
ex85299065	65
ex85299092	35
ex85299092	36
ex85299092	50
ex85369040	20
ex85369040	92
ex85369040	94
ex85369040	95
ex85369095	20
ex85369095	92
ex85369095	94
ex85369095	95
ex85371098	70
ex85371098	92
ex85437090	33
ex85439000	15
ex85444993	10
ex85459090	30
ex87082990	10
ex87083010	20
ex87083010	30
ex87083091	10
ex87083091	20
ex87083091	30
ex87083091	40
ex87083091	50
ex87084020	20
ex87084050	10
ex87085055	10
ex87085099	10
ex87085099	20
ex87088035	10
ex87088091	10
ex87088091	20
ex87089135	10
ex87089199	20
ex87089199	30
ex87089435	20
ex87089599	10
ex87089910	20
ex87089997	40
ex87089997	50
ex87089997	70
ex87149130	24
ex87149130	34
ex87149130	71
ex90138090	10

Amendments and corrections
December 31, 2021	Implicitly repealed by 32021R2278
July 1, 2017	Application - See Art 2
June 27, 2017	Entry into force - Date pub. See Art 2

Council Regulation (EU) 2017/1134 of 20 June 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products