| CN code | TARIC | Description | Rate of autonomous duty | Supplementary Unit | Date foreseen for mandatory review |
|---|
| *ex28183000 | 30 | Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6) | 0 % | — | 31.12.2018 |
| ex28257000 | 20 | Molybdic Acid (CAS RN 7782-91-4) | 0 % | — | 31.12.2021 |
| *ex28421000 | 40 | Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (2) | 0 % | — | 31.12.2021 |
| *ex29051100ex29051900 | 2035 | Methyl methanesulphonate (CAS RN 66-27-3) | 0 % | — | 31.12.2021 |
| ex29052200 | 20 | 3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9) | 0 % | — | 31.12.2021 |
| ex29093090 | 15 | {[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3) | 0 % | — | 31.12.2021 |
| ex29093090 | 25 | 1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane | 0 % | — | 31.12.2021 |
| *ex29096000 | 40 | 1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3) | 0 % | — | 31.12.2017 |
| ex29121900 | 10 | Undecanal (CAS RN 112-44-7) | 0 % | — | 31.12.2021 |
| ex29151200 | 10 | Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1) | 0 % | — | 31.12.2021 |
| *ex29161400 | 30 | Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:- 0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),
- 0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and
- 0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)
| 0 % | — | 31.12.2020 |
| ex29163990 | 33 | Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2) | 0 % | — | 31.12.2021 |
| ex29163990 | 73 | (2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5) | 0 % | — | 31.12.2021 |
| *ex29202900ex29209070 | 5050 | Fosetyl-aluminium (CAS RN 39148-24-8) | 0 % | — | 31.12.2018 |
| *ex29202900ex29209070 | 6040 | Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (2) | 0 % | — | 31.12.2021 |
| ex29221900 | 40 | (R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5) | 0 % | — | 31.12.2021 |
| ex29242970 | 30 | Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8) | 0 % | — | 31.12.2021 |
| ex29242970 | 50 | N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3) | 0 % | — | 31.12.2021 |
| ex29269070 | 30 | 4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2) | 0 % | — | 31.12.2021 |
| *ex29319000 | 05 | Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN | 0 % | — | 31.12.2020 |
| *ex29321400ex29400000 | 1040 | 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2) | 0 % | — | 31.12.2019 |
| ex29329900 | 13 | (4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2) | 0 % | — | 31.12.2021 |
| ex29329900 | 18 | 4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2) | 0 % | — | 31.12.2021 |
| ex29331990 | 45 | 5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3) | 0 % | — | 31.12.2021 |
| ex29331990 | 55 | 5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0) | 0 % | — | 31.12.2021 |
| ex29332990 | 75 | 2,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2) | 0 % | — | 31.12.2021 |
| ex29333999 | 10 | 2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7) | 0 % | — | 31.12.2021 |
| ex29333999 | 33 | 5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9) | 0 % | — | 31.12.2021 |
| ex29333999 | 41 | 2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7) | 0 % | — | 31.12.2021 |
| ex29333999 | 46 | Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (2) | 0 % | — | 31.12.2021 |
| *ex29335995ex29339980 | 8851 | Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (2) | 0 % | — | 31.12.2021 |
| ex29339980 | 42 | (S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8) | 0 % | — | 31.12.2021 |
| ex29339980 | 44 | (2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9) | 0 % | — | 31.12.2021 |
| *ex29339980 | 53 | Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5) | 0 % | — | 31.12.2018 |
| *ex29339980 | 72 | 1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7) | 0 % | — | 31.12.2018 |
| ex29349990 | 46 | 4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8) | 0 % | — | 31.12.2021 |
| ex29349990 | 47 | Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (2) | 0 % | — | 31.12.2021 |
| ex29349990 | 49 | Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8) | 0 % | — | 31.12.2021 |
| ex29349990 | 53 | 4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) | 0 % | — | 31.12.2021 |
| ex29359090 | 30 | 6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1) | 0 % | — | 31.12.2021 |
| *ex32041600 | 30 | Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:- Colourant Reactive Yellow 201 (CAS RN 27624-67-5),
- 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or
- 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)
| 0 % | — | 31.12.2019 |
| ex32041700 | 22 | Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight | 0 % | — | 31.12.2021 |
| *ex32041700 | 24 | Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight | 0 % | — | 31.12.2018 |
| *ex32159070 | 30 | Disposable cartridge ink, containing by weight:- 1 % or more, but not more than 10 % of amorphous silicon dioxide or
- 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents
for use in the marking of integrated circuits (2) | 0 % | — | 31.12.2018 |
| *ex35069110ex35069190 | 5050 | Preparation containing by weight:- 15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and
- 10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers
dissolved in:- Methyl ethyl ketone (CAS RN 78-93-3)
- Heptane (CAS RN 142-82-5), and
- Toluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)
| 0 % | — | 31.12.2020 |
| ex38112100 | 11 | Dispersing agent and oxidation inhibitor containing:- o-amino polyisobutylenephenol (CAS RN 78330-13-9),
- more than 30 % by weight but not more than 50 % by weight of mineral oils,
used in the manufacture of blends of additives for lubricating oils (2) | 0 % | — | 31.12.2021 |
| *ex38112100 | 19 | Additives containing:- a polyisobutylene succinimide based mixture, and
- more than 30 % but not more than 50 % by weight of mineral oils,
having a total base number of more than 40, for use in the manufacture of lubricating oils (2) | 0 % | — | 31.12.2019 |
| ex38112900 | 75 | Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (2) | 0 % (2) | — | 31.12.2021 |
| ex38119000 | 50 | Corrosion inhibitor containing:- polyisobutenyl succinic acid and
- more than 5 % and not more than 20 % by weight of mineral oils
for use in the manufacture of blends of additives for fuels (2) | 0 % | — | 31.12.2021 |
| *ex38159090 | 40 | Catalyst:- containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,
- in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm
for use in the manufacture of acrylic acid (2) | 0 % | — | 31.12.2018 |
| ex38249992 | 25 | Preparation containing by weight:- 25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)
- 25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)
- 10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)
- 5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)
- 1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)
- 1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)
- Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)
| 0 % | — | 31.12.2021 |
| ex38249992 | 27 | 4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent | 0 % | — | 31.12.2021 |
| ex38249992 | 30 | Aqueous solution of caesium formate and potassium formate containing by weight:- 1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),
- 1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and
- whether or not containing not more than 9 % of additives
| 0 % | — | 31.12.2021 |
| *ex38249992 | 40 | Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent | 0 % | — | 31.12.2020 |
| *ex38249992 | 69 | Preparation containing by weight:- 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)
- 7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and
- not more than 1 % triphenyl phosphate (CAS RN 115-86-6)
| 0 % | — | 31.12.2020 |
| ex38249993 | 45 | Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:- not more than 20 % of disodium sulphate, and
- not more than 10 % of sodium chloride
| 0 % | — | 31.12.2021 |
| ex38249996 | 70 | Powder containing by weight:- 28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)
- 30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)
- 17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)
| 0 % | — | 31.12.2021 |
| ex38249996 | 74 | Mixture with a non-stoichiometric composition:- with a crystalline structure,
- with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm
| 0 % | — | 31.12.2021 |
| ex38249996 | 80 | Mixture consisting of:- 64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)
- 25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and
- not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)
| 0 % | — | 31.12.2021 |
| *ex39011010ex39019080 | 2050 | High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with- a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min and
- a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and
- a vicat softening temperature of min. 94 °C
| 0 % | — | 31.12.2019 |
| ex39069090 | 53 | Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:- 75 % or more but not more than 85 % of polyacrylamide and
- 15 % or more but not more than 25 % of polyethylene glycol
| 0 % | — | 31.12.2021 |
| ex39069090 | 63 | Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5) | 0 % | — | 31.12.2021 |
| ex39100000 | 45 | Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8) | 0 % | — | 31.12.2021 |
| ex39100000 | 55 | Preparation containing by weight:- 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),
- 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and
- 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)
| 0 % | — | 31.12.2021 |
| *ex39139000 | 30 | Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350000 | 0 % | — | 31.12.2018 |
| ex39209959 | 70 | Tetrafluoroethylene film, put up in rolls, with:- a thickness of 50 μm,
- a melting point of 260 °C, and
- a specific gravity of 1,75 (ASTM D792)
for use in the manufacture of semiconductor devices (2) | 0 % | — | 31.12.2021 |
| *ex39211310 | 10 | Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092 | 0 % | — | 31.12.2018 |
| ex39211900 | 50 | Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:- a total thickness of more than 0,05 mm but not more than 0,20 mm,
- a water entry pressure between 5 and 200 kPa according to ISO 811, and
- an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5
| 0 % | — | 31.12.2021 |
| *ex39231090 | 10 | Photomask or wafer compacts:- consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,
- having non porous, abrasion resistant or impact resistant surface properties,
- fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and
- with or without a gasket seal,
of a kind used in the photolithography or other semiconductor production to house photomasks or wafers | 0 % | — | 31.12.2021 |
| *ex39263000ex87082910ex87082990 | 101010 | Plastic cover with cips for the exterior rear-view mirror of motor vehicles | 0 % | p/st | 31.12.2020 |
| *ex39269097 | 20 | Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls | 0 % | p/st | 31.12.2019 |
| ex39269097ex85129090 | 7710 | Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems | 0 % | p/st | 31.12.2021 |
| ex40169957 | 10 | Air intake hose for air supply to the combustion part of the engine comprising at least:- one flexible rubber hose,
- one plastic hose, and
- metal clips,
- whether or not a resonator
for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| ex40169957 | 20 | Rubber bumper strip with a silicone coating of a length not more than 1200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| *ex59119099ex84219990 | 3092 | Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more | 0 % | — | 31.12.2018 |
| *ex59119099 | 40 | Multi-layered non-woven polyester polishing pads, impregnated with polyurethane | 0 % | — | 31.12.2019 |
| ex68053000 | 10 | Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (2) | 0 % | — | 31.12.2021 |
| ex73181900 | 30 | Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| *ex74101100ex85079080ex85459090 | 106030 | Roll of laminate foil of graphite and copper, with:- a width of 610 mm or more but not more than 620 mm, and
- a diameter of 690 mm or more but not more than 710 mm,
for use in the manufacture of lithium-ion electric rechargeable batteries (2) | 0 % | — | 31.12.2021 |
| *ex76071190ex76071190 | 4757 | Aluminium foil in rolls:- having a purity of 99,99 % by weight,
- of a thickness of 0,021 mm or more but not more than 0,2 mm,
- with a width of 500 mm,
- with a surface oxide layer by 3 to 4 nm thick,
- and with a cubic texture of more than 95 %
| 0 % | — | 31.12.2021 |
| *ex76071990ex85079080 | 1080 | Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:- a width of 595 mm or more but not more than 605 mm, and
- a diameter of 690 mm or more but not more than 710 mm,
for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (2) | 0 % | — | 31.12.2021 |
| *ex76169910ex87089910ex87089997 | 306050 | Aluminium engine bracket, with dimensions of:- height of more than 10 mm but not more than 200 mm
- width of more than 10 mm but not more than 200 mm
- length of more than 10 mm but not more than 200 mm
equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:- internal porosity not more than 1 mm;
- outer porosity not more than 2 mm;
- Rockwell hardness HRB 10 or more
of a kind used in the production of suspensions systems for engines in motor vehicles | 0 % | p/st | 31.12.2019 |
| *ex81089030 | 20 | Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 87141040 (2) | 0 % | — | 31.12.2017 |
| *ex81089050 | 10 | Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 871410 (2) | 0 % | — | 31.12.2018 |
| *ex81089050 | 35 | Plates, sheets and strips of an alloy of titanium | 0 % | — | 31.12.2021 |
| *ex83016000ex84139100ex84199085ex84389000ex84689000ex84769090ex84799070ex84819000ex85030099ex85159080ex85369095ex85371098ex87089120ex87089199ex87089910ex87089997 | 20403020202083307030957010205040 | Keypads of silicone or plastic,- whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,
- whether or not printed or surface treated,
- whether or not with electrical conducting elements,
- whether or not with keypads foil glued on the keyboard,
- whether or not with protective foil,
- single or multilayer
| 0 % | p/st | 31.12.2020 |
| *ex84099100ex84099900 | 3050 | Exhaust manifold with spiral-shaped gas turbine turbocharger component with:- a heat-resistance of not more than 1050 °C, and
- a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm
| 0 % | p/st | 31.12.2018 |
| ex84099900 | 40 | Plastic or aluminum cylinder head cover with:- a camshaft position sensor (CMPS),
- metal brackets for mounting on an engine, and
- two or more gaskets,
for use in the manufacture of engines of motor vehicles (2) | 0 % | p/st | 31.12.2021 |
| ex84119900 | 65 | Spiral-shaped gas turbine turbocharger component:- with a heat-resistance of not more than 1050 °C, and
- with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm
| 0 % | p/st | 31.12.2021 |
| ex84133020 | 30 | Single-cylinder radial-piston high pressure pump for gasoline direct injection with:- an operating pressure of 200 bar or more, but not more than 350 bar,
- a flow control, and
- a pressure relief valve,
for use in the manufacture of engines of motor vehicles (2) | 0 % | — | 31.12.2021 |
| ex84799070 | 87 | Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (2) | 0 % | p/st | 31.12.2021 |
| ex84818059 | 20 | Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (2) | 0 % | p/st | 31.12.2021 |
| ex84842000 | 10 | Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (2) | 0 % | p/st | 31.12.2021 |
| ex85011099 | 56 | DC Motor:- with a speed rotation of not more than 7000 rpm (without load),
- with a nominal voltage of 12 V (± 4 V),
- with a maximum power of 13,78 W (at 3,09 A),
- with a specified temperature range from – 40 °C to 160 °C,
- with a gear connection,
- with a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 100 Nm
| 0 % | — | 31.12.2021 |
| ex85011099 | 58 | DC Motor:- with a speed rotation of not more than 6500 rpm (without load),
- with a nominal voltage of 12 V (± 4 V),
- with a maximal power below than 20 W,
- with a specified temperature range from – 40 °C to 160 °C,
- with a worm gear drive,
- with a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 75 Nm
| 0 % | — | 31.12.2021 |
| *ex85011099 | 65 | Electric turbocharger actuator, with:- a DC motor,
- an integrated gear mechanism,
- a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,
- a (pulling) force of 250 N or more in each position of its stroke,
- an effective stroke of 15 mm or more but not more than 25 mm,
- with or without an on-board diagnostics interface
| 0 % | — | 31.12.2020 |
| *ex85043180 | 50 | Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (2) | 0 % | — | 31.12.2021 |
| *ex85044090 | 25 | Direct current to direct current converter- without housing or
- with housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing
| 0 % | p/st | 31.12.2021 |
| ex85045095 | 70 | Solenoid coil with:- a rated power of more than 10 W but not more than 15 W,
- an insulation resistance of 100 M Ohms or more,
- a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,
- a rated current of not more than 1,22 A,
- a rated voltage of not more than 25 V
| 0 % | p/st | 31.12.2021 |
| *ex85051100 | 65 | Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having- a length of not more than 140 mm,
- a width of not more than 90 mm, and
- a thickness of not more than 55 mm,
or in the shape of curved rectangle (tile type) having- a length of not more than 75 mm,
- a width of not more than 40 mm,
- a thickness of not more than 7 mm, and
- a radius of curvature of more than 86 mm but not more than 241 mm
or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre | 0 % | p/st | 31.12.2018 |
| *ex85051100 | 75 | A quarter sleeve intended to become permanent magnet after magnetization,- consisting of at least neodymium, iron and boron,
- with a width of 9,1 mm or more but not more than 10,5 mm,
- with a length of 20 mm or more but not more than 30,1 mm,
of a kind used on rotors for the manufacture of fuel pumps | 0 % | p/st | 31.12.2019 |
| *ex85079080 | 70 | Cut plate of nickel-plated copper foil, with:- a width of 70 mm (± 5 mm),
- a thickness of 0,4 mm (± 0,2 mm),
- a length of not more than 55 mm,
for use in the manufacture of lithium-ion electric rechargeable batteries (2) | 0 % | p/st | 31.12.2021 |
| ex85184080 | 93 | Audio power amplifier with:- an output power of 50 W,
- an operating voltage of more than 9 V but not more than 16 V,
- an electrical impedance of not more than 4 Ohm,
- a sensitivity of more than 80 dB
- in a metal housing
for use in the manufacture of motor vehicles (2) | 0 % | p/st | 31.12.2021 |
| *ex85229080ex85299092 | 3057 | Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (2) | 0 % | p/st | 31.12.2021 |
| *ex85299065ex85299092 | 6553 | Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module | 0 % | p/st | 31.12.2020 |
| *ex85299092 | 59 | LCD modules with:- a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,
- a LED backlight,
- a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components,
- 6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface,
- whether or not in a housing,
for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (2) | 0 % | p/st | 31.12.2020 |
| *ex85299092 | 63 | LCD module- with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,
- with or without a touch screen,
- with an LED backlight,
- with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,
- with a plug for power supply and CAN and LVDS interfaces,
- with or without electronic components for dynamic adjustments of colour,
- in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,
suitable for installation in motor vehicles of Chapter 87 (2) | 0 % | p/st | 31.12.2020 |
| *ex85299092 | 67 | Colour LCD display panel for LCD monitors of heading 8528:- with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,
- with or without a touch screen,
- with backlight, micro-controller,
- with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,
- in a housing with or without a heat sink at the back of the housing,
- without a signal-processing module,
- whether or not with haptic and acoustical feedback,
for use in the manufacture of vehicles of Chapter 87 (2) | 0 % | p/st | 31.12.2020 |
| *ex85369095 | 20 | Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V | 0 % | p/st | 31.12.2020 |
| *ex85369095 | 92 | Metallic stamped frame with connections | 0 % | p/st | 31.12.2018 |
| *ex85369095ex85444993 | 9410 | Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements | 0 % | p/st | 31.12.2018 |
| ex85371098 | 65 | Lever for control module under the steering wheel:- with one or more single or multi-positional electrical switches (push-button, rotary or other),
- whether or not equipped with printed circuit boards and electrical cables,
- for a voltage of 9 V or more but not more than 16 V,
of a kind used in the manufacture of motor vehicles of Chapter 87 | 0 % | p/st | 31.12.2021 |
| ex85371098 | 75 | Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:- an antenna,
- a connector,
- a metal holder,
for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| *ex85371098 | 92 | Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors | 0 % | p/st | 31.12.2018 |
| ex85389099 | 60 | Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87 | 0 % | p/st | 31.12.2021 |
| ex85437090 | 15 | Laminated electrochromic film consisting of:- two outer layers of polyester,
- a middle layer of acrylic polymer and silicone, and
- two electric connection terminals
| 0 % | — | 31.12.2021 |
| *ex85437090 | 33 | High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing | 0 % | — | 31.12.2021 |
| ex85444290 | 80 | 12-wire connecting cable containing two connectors- of a voltage of 5 V,
- with a length of not more than 300 mm
for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| ex87081010ex87081090 | 1010 | Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| *ex87083010ex87083091ex87083099 | 206010 | Motor powered brake actuation unit- with a rating of 13,5 V (± 0,5 V) and
- a ball screw mechanism to control brake fluid pressure in the master cylinder
for use in the manufacture of electric motor vehicles (2) | 0 % | p/st | 31.12.2019 |
| *ex87083010ex87083091 | 4030 | Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2019 |
| *ex87083010ex87083091 | 5010 | Drum type parking brake:- operating within the service brake disk,
- with a diameter of 170 mm or more but not more than 195 mm
for use in the manufacture of motor vehicles (2) | 0 % | p/st | 31.12.2021 |
| *ex87083010ex87083091 | 6020 | Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2019 |
| *ex87083010ex87083091 | 7040 | Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2020 |
| *ex87084020ex87084050 | 2010 | Automatic hydrodynamic gearbox- with a hydraulic torque converter,
- without transfer box and cardan shaft,
- whether or not with front differential,
for use in the manufacture of motor vehicles of Chapter 87 (2) | 0 % | p/st | 31.12.2020 |
| *ex87085020ex87085055 | 1010 | Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703 | 0 % | p/st | 31.12.2020 |
| *ex87085020ex87085099 | 2010 | Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle- of a length of 1 m or more but not more than 2 m,
- of a weight of 6 kg or more but not more than 9 kg
| 0 % | p/st | 31.12.2020 |
| *ex87085020ex87085099ex87089910ex87089997 | 30202070 | Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least:- two electro-magnetic one direction clutches, working in opposite sides,
- an input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, and
- a coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth spline
for use in the manufacture of all-terrain vehicles or utility task vehicles (2) | 0 % | — | 31.12.2021 |
| *ex87088020ex87088035 | 1010 | Upper strut insulator containing- a metal holder with three mounting screws, and
- a rubber bump
of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2020 |
| *ex87088020ex87088091 | 2010 | Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2020 |
| *ex87088020ex87088091 | 3020 | Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2020 |
| ex87088099 | 10 | Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| *ex87089120ex87089135 | 2010 | Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2019 |
| *ex87089120ex87089199 | 3030 | Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:- an insulating area flatness of not more than 0,1 mm,
- a permissible particle quantity of 0,3 mg per tank,
- a distance between pores of 2 mm or more,
- pore sizes of not more than 0,4 mm, and
- not more than 3 pores larger than 0,2 mm
of a kind used in heat exchangers for car cooling systems | 0 % | p/st | 31.12.2020 |
| *ex87089420ex87089435 | 1020 | Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2019 |
| *ex87089510ex87089599 | 4010 | Front passenger airbag composed of:- a metal housing with at least six mounting brackets,
- an embedded safety cushion,
- a cartridge filled with compressed gas
of a kind used in the manufacture of goods of Chapter 87 | 0 % | p/st | 31.12.2020 |
| ex87089910ex87089997 | 3015 | Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| ex87089910ex87089997 | 4025 | Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (2) | 0 % | p/st | 31.12.2021 |
| *ex87149130ex87149130ex87149130 | 253572 | Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (2) | 0 % | — | 31.12.2018 |
| *ex90138090 | 20 | Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:- one or more monolithic application-specific integrated circuits (ASIC),
- one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material
of a kind used for incorporation into products of Chapters 84 to 90 and 95 | 0 % | p/st | 31.12.2019 |