Article 1AuthorisationThe substances specified in the Annex, belonging to the additive category "sensory additives" and to the functional group "flavouring compounds", are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2Transitional measures1.The substances as specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.2.Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.3.Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.For the CommissionThe PresidentJean-Claude JunckerANNEX

Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reportsCategory: Sensory additives. Functional group: Flavouring compounds

Identification number of the additive	Name of the holder of authorisation	Additive	Composition, chemical formula, description, analytical method	Species or category of animal	Maximum age	Minimum content	Maximum content	Other provisions	End of period of authorisation
Identification number of the additive	Name of the holder of authorisation	Additive		Species or category of animal	Maximum age	mg of active substance/kg of complete feedingstuff with a moisture content of 12 %		Other provisions	End of period of authorisation
(1)	(2)	(3)	(4)	(5)	(6)	(7)		(8)	(9)
2b02022	—	Octan-2-ol	Additive compositionOctan-2-olCharacterisation of the active substanceOctan-2-olProduced by chemical synthesisPurity: min 97 %C8H18OCAS No 123¬96-6FLAVIS No:02.022Methods of AnalysisFor the determination of octan-2-ol in the feed additive and in feed flavouring premixtures:Gas-chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories."5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b02079	—	Isopropanol	Additive compositionIsopropanolCharacterisation of the active substanceIsopropanolProduced by chemical synthesisPurity: min. 99,7 %Chemical formula: C3H8OCAS No 67-63-0FLAVIS No: 02.079Method of analysisFor the determination of isopropanol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:25 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b02088	—	Pentan-2-ol	Additive compositionPentan-2-olCharacterisation of the active substancePentan-2-olProduced by chemical synthesisPurity: min. 97,9 %Chemical formula: C5H12OCAS No 6032-29-7FLAVIS No: 02.088Method of analysisFor the determination of pentan-2-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories."5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b02098	—	Octan-3-ol	Additive compositionOctan-3-olCharacterisation of the active substanceOctan-3-olProduced by chemical synthesisPurity: min. 97 %Chemical formula: C8H18OCAS No 589-98-0FLAVIS No:02.098Method of analysisFor the determination of octan-3-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories."5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b07002	—	Heptan-2-one	Additive compositionHeptan-2-oneCharacterisation of the active substanceHeptan-2-oneProduced by chemical synthesisPurity: min. 95 %Chemical formula: C7H14OCAS No 110-43-0FLAVIS No: 07.002Method of analysisFor the determination heptan-2-one in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:4 mg/kg for piglets;3 mg/kg for chickens for fattening and laying hens;2 mg/kg for cats;5 mg/kg for other species and categories"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:4 mg/kg for piglets;3 mg/kg for chickens for fattening and laying hens;2 mg/kg for cats;5 mg/kg for other species and categories6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b07054	—	Pentan-2-one	Additive compositionPentan-2-oneCharacterisation of the active substancePentan-2-oneProduced by chemical synthesisPurity: min. 95 %Chemical formula: C5H10OCAS No 107-87-9FLAVIS No: 07.054Method of analysisFor the determination of pentan-2-one in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:4 mg/kg for piglets;3 mg/kg for chickens for fattening and laying hens;2 mg/kg for cats;5 mg/kg for other species and categories"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:4 mg/kg for piglets;3 mg/kg for chickens for fattening and laying hens;2 mg/kg for cats;5 mg/kg for other species and categories6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b07099	—	6-Methyl- hepta- 3,5-dien- 2-one	Additive composition6-Methyl- hepta- 3,5-dien- 2-oneCharacterisation of the active substance6-Methyl- hepta- 3,5-dien- 2-oneProduced by chemical synthesisPurity: min. 96 %Chemical formula: C8H12OCAS No 1604-28-0FLAVIS No: 07.099Method of analysisFor the determination of 6-methyl- hepta- 3,5-dien- 2-one in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:0,3 mg/kg for pigs and poultry;0,5 mg/kg for other species and categories"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:0,3 mg/kg for pigs and poultry;0,5 mg/kg for other species and categories6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b07113	—	Nonan- 3- one	Additive compositionNonan- 3- oneCharacterisation of the active substanceNonan- 3- oneProduced by chemical synthesisPurity: min. 95,9 %Chemical formula: C9H18OCAS No 925-78-0FLAVIS No: 07.113Method of analysisFor the determination of nonan- 3- one in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:pigs and poultry: 0,3 mg/kg, for fish: 0,05 mg/kg and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:0,3 mg/kg for pigs and poultry;0,05 mg/kg for fish;0,5 mg/kg for other species and categories"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:0,3 mg/kg for pigs and poultry;0,05 mg/kg for fish;0,5 mg/kg for other species and categories6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b07150	—	Decan- 2 -one	Additive compositionDecan- 2 -oneCharacterisation of the active substanceDecan- 2 -oneProduced by chemical synthesisPurity: min. 98 %Chemical formula: C10H20OCAS No 693-54-9FLAVIS No: 07.150Method of analysisFor the determination of decan- 2 -one in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:0,3 mg/kg for pigs and poultry;0,5 mg/kg for other species and categories"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:0,3 mg/kg for pigs and poultry;0,5 mg/kg for other species and categories6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027
2b09105	—	Isopropyl tetradecanoate	Additive compositionIsopropyl tetradecanoateCharacterisation of the active substanceIsopropyl tetradecanoateProduced by chemical synthesisPurity: min. 99 %Chemical formula: C17H34O2CAS No 110-27-0FLAVIS No 09.105Method of analysisFor the determination of isopropyl tetradecanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	6 February 2027