Article 1The Annex to Regulation (EU) No 1344/2011 is hereby amended as follows:(1)the rows for the products listed in Annex I to this Regulation are inserted;(2)the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 July 2013.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 27 June 2013.For the CouncilThe PresidentE. GilmoreANNEX I

Products referred to in point (1) of Article 1Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p. 1).The specific duty rate is applicable.Suspension relating to a product in the Annex to Regulation (EU) No 1344/2011 for which the CN or TARIC code or the product description is modified by this Regulation.

CN code	TARIC	Description	Rate of autonomous duty	Date foreseen for mandatory review
ex20079950	81	Acerola puree concentrate:of the genus Malpighia spp.,with a sugar content by weight of 13 % or more but not more than 30 %for use in the manufacture of products of food and drink industry	9 %	31.12.2017
ex20079950	91		9 %	31.12.2017
ex20079950	82	Acidified banana puree concentrate, obtained by cooking:of the genus Musa cavendish,with a sugar content by weight of 13 % or more but not more than 30 %for use in the manufacture of products of food and drink industry	11,5 %	31.12.2017
ex20079950	92		11,5 %	31.12.2017
ex20079950	83	Mango puree concentrate, obtained by cooking:of the genus Mangifera spp.,with a sugar content by weight of not more than 30 %for use in the manufacture of products of food and drink industry	6 %	31.12.2017
ex20079950	93
ex20079993	10
ex20079950	84	Papaya puree concentrate, obtained by cooking:of the genus Carica spp.,with a sugar content by weight of 13 % or more but not more than 30 %for use in the manufacture of products of food and drink industry	7,8 %	31.12.2017
ex20079950	94		7,8 %	31.12.2017
ex20079950	85	Guava puree concentrate, obtained by cooking:of the genus Psidium spp.,with a sugar content by weight of 13 % or more but not more than 30 %for use in the manufacture of products of food and drink industry	6 %	31.12.2017
ex20079950	95		6 %	31.12.2017
ex28053090	40	Rare earth metals, scandium and yttrium of a purity by weight of 95 % or more	0 %	31.12.2015
ex28053090	50
ex28053090	60
ex28053090	70
ex28053090	75
ex28053090	79
ex28111980	30	Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry	0 %	31.12.2017
ex28181091	10	Sintered corundum with micro crystalline structure, containing by weight:94 % or more, but not more than 98,5 % of α-Al2O3,2 % (± 1,5 %) of magnesium spinel,1 % (± 0,6 %) of yttrium oxide and2 % (± 1,2 %) of lanthanum oxide and neodymium oxidewith less than 50 % of the total weight having a particle size of more than 10 mm	0 %	31.12.2015
ex29033990	25	2,3,3,3-Tetrafluoroprop-1-ene (CAS RN 754-12-1)	0 %	31.12.2017
ex29038990	50	Chlorocyclopentane (CAS RN 930-28-9)	0 %	31.12.2017
ex29053995	40	Decane-1,10-diol (CAS RN 112-47-0)	0 %	31.12.2017
ex29062900	30	2-Phenylethanol (CAS RN 60-12-8)	0 %	31.12.2017
ex29072300	10	4,4’-Isopropylidenediphenol (CAS RN 80-05-7)	0 %	31.12.2017
ex29072900	55	Biphenyl-2,2’-diol (CAS RN 1806-29-7)	0 %	31.12.2017
ex29122900	50	4-Isobutylbenzaldehyde (CAS RN 40150-98-9)	0 %	31.12.2017
ex29145000	45	3,4-Dihydroxybenzophenone (CAS RN 10425-11-3)	0 %	31.12.2017
ex29147000	20	2,4-Difluorobenzophenone (CAS RN 342-25-6)	0 %	31.12.2017
ex29153900	20	Isopentyl acetate (CAS RN 123-92-2)	0 %	31.12.2017
ex29156019	10	Ethyl butyrate (CAS RN 105-54-4)	0 %	31.12.2017
ex29159070	30	3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)	0 %	31.12.2017
ex29161200	70	2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)	0 %	31.12.2017
ex29171390	10	Dimethyl sebacate (CAS RN 106-79-6)	0 %	31.12.2017
ex29182900	35	Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)	0 %	31.12.2017
ex29183000	50	Ethyl acetoacetate (CAS RN 141-97-9)	0 %	31.12.2017
ex29189990	15	Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)	0 %	31.12.2017
ex29189990	40	trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 537-98-4)	0 %	31.12.2013
ex29209010	60	2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)	0 %	31.12.2017
ex29213099	40	Cyclopropylamin (CAS RN 765-30-0)	0 %	31.12.2017
ex29221985	20	2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)	0 %	31.12.2017
ex29221985	25	Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2)	0 %	31.12.2017
ex29291000	20	Butyl isocyanate (CAS RN 111-36-4)	0 %	31.12.2017
ex29319090	35	(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)	0 %	31.12.2017
ex29329900	25	1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)	0 %	31.12.2017
ex29331990	85	Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioat (CAS RN 473799-16-5)	0 %	31.12.2017
ex29332990	80	Imazalil (ISO) (CAS RN 35554-44-0)	0 %	31.12.2017
ex29333999	57	Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)	0 %	31.12.2017
ex29334910	30	Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)	0 %	31.12.2017
ex29339980	43	2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7)	0 %	31.12.2017
ex29339980	47	Paclobutrazol (ISO) (CAS RN 76738-62-0)	0 %	31.12.2017
ex29349990	37	4-Propan-2-ylmorpholine (CAS RN 1004-14-4)	0 %	31.12.2017
ex32041100	20	Dye C.I. Disperse Yellow 241 (CAS RN 83249-52-9), with a purity of 97 % or more as determined by high pressure liquid chromatography	0 %	31.12.2015
ex32041100	80	Dye preparation, non-ionogenic, containing:N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) andN-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)	0 %	31.12.2017
ex32041200	20	Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0)	0 %	31.12.2017
ex32041200	30	Acid dye preparation, anionic, containing:lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),C.I. Acid Green 25 (CAS RN 4403-90-1) andC.I. Acid Blue 80 (CAS RN 4474-24-2)	0 %	31.12.2017
ex32041300	30	Dye C.I. Basic Blue 7 (CAS RN 2390-60-5)	0 %	31.12.2017
ex32041300	40	Dye C.I. Basic Violet 1 (CAS RN 603-47-4)/(CAS RN 8004-87-3)	0 %	31.12.2017
ex32041700	25	Dye C.I. Pigment Yellow 14 (CAS RN 5468-75-7)	0 %	31.12.2016
ex32041700	60	Dye C.I. Pigment Red 53:1 (CAS RN 5160-02-1)	0 %	31.12.2016
ex32041700	70	Dye C.I. Pigment Yellow 13 (CAS RN 5102-83-0)	0 %	31.12.2016
ex32041700	75	Dye C.I. Pigment Orange 5 (CAS RN 3468-63-1)	0 %	31.12.2017
ex32041900	73	Dye C.I. Solvent Blue 104 (CAS RN 116-75-6) with a purity of 97 % or more determined by high pressure liquid chromatography	0 %	31.12.2015
ex32074085	40	Glass flakes (CAS RN 65997-17-3):of a thickness of 0,3 μm or more but not more than 10 μm, andcoated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)	0 %	31.12.2017
ex32151900	20	Ink:consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),with a total solid content by weight of 55 % or more, but not more than 57 %, andwith a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,used to imprint electrodes	0 %	31.12.2017
ex37079020	50	Dry ink powder or toner blend, consisting of:styrene acrylate/butadiene copolymereither carbon black or an organic pigmentwhether or not containing polyolefin or amorphous silicafor use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers	0 %	31.12.2017
ex38029000	11	Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products	0 %	31.12.2017
ex38123080	75	N,N’-Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7)	0 %	31.12.2017
ex38123080	80	UV-stabiliser, consisting of:a hindered amine: N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) andeither an o-hydroxyphenyl triazine UV light absorber ora chemically modified phenolic compound	0 %	31.12.2017
ex38123080	85	Mixture containing by weight:70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)	0 %	31.12.2016
ex38249097	08	Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)	0 %	31.12.2014
ex38249097	18	Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 515136-48-8)	0 %	31.12.2013
ex38249097	47	Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:0,1 % or more but not more than 1 % of platinum, and0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)	0 %	31.12.2017
ex38249097	49	Preparation containing:C,C’-azodi(formamide) (CAS RN 123-77-3),magnesium oxide (CAS RN 1309-48-4) andzinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)in which the gas formation from C,C’-azodi(formamide) occurs at 135 °C	0 %	31.12.2017
ex38249097	51	Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)	0 %	31.12.2017
ex38249097	87	Paste containing by weight:75 % or more, but not more than 85 % of copper,inorganic oxides,ethyl cellulose, anda solvent	0 %	31.12.2017
ex38249097	93	Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde (CAS RN 487-68-3) in acetone	0 %	31.12.2013
ex38249097	94	Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges	0 %	31.12.2013
ex39053000	10	Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors	0 %	31.12.2017
ex39059100	20	Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 13 % of the monomer unit ethylene	0 %	31.12.2017
ex39069090	27	Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate	0 %	31.12.2017
ex39072020	20	Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1)	0 %	31.12.2017
ex39072020	30	Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone	0 %	31.12.2013
ex39072020	40	Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100)	0 %	31.12.2013
ex39074000	10	Polycarbonate pellets:containing 7 % or more but not more than 15 % by weight of non-halogen flame retardant, andwith a specific gravity of 1,20 (± 0,01)	0 %	31.12.2016
ex39079990	30	Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)	0 %	31.12.2015
ex39139000	20		0 %	31.12.2015
ex39095090	10	UV curable water soluble liquid photopolymer consisting of a mixture by weight of60 % or more of two-functional acrylated polyurethane oligomers and30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and10 % (± 3 %) of hydroxyl functionalised mono-functional (metha) acrylates	0 %	31.12.2014
ex39191080	47	Polyester, polyurethane or polycarbonate foil:with pressure sensitive silicone polymer adhesive,of a total thickness of not more than 0,7 mm,of a total width of 1 cm or more, but not more than 1 m,whether or not in rollsof a kind used for the protection of the surface of products of headings 8521 and 8528	0 %	31.12.2017
ex39199000	32		0 %	31.12.2017
ex39191080	53	Polyethylene foil:with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,of a total thickness of 0,025 mm or more, but not more than 0,7 mm, andof a total width of 6 cm or more, but not more than 1 m,whether or not in rolls,of a kind used for the protection of the surface of products of headings 8521 and 8528	0 %	31.12.2017
ex39199000	34
ex39201028	93
ex39201089	50
ex39199000	36	Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride)whether or not with a pressure or heat sensitive adhesive layerwhether or not with a release filmwith a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken togetherwith a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 g/m2) with pressure sensitive layer	0 %	31.12.2017
ex39204910	95		0 %	31.12.2017
ex39199000	38	Self-adhesive film composed of:a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,not more than 6 % by weight of other additives,a pressure sensitive adhesive; andcovered on one side with a release liner,whether or not with a separate self-adhesive over laminate protective film,of a total thickness of not more than 400 μm	0 %	31.12.2017
ex39199000	40	Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film:containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or morehaving on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2coated on the other side with a pressure sensitive adhesive and a release liner	0 %	31.12.2017
ex39199000	42	Self-adhesive film composed of:a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,a second layer containing a maleic anhydride copolymer,a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,a pressure sensitive adhesive; andcovered on one side with a release linerwhether or not with a separate self-adhesive over laminate protective filmof a total thickness of not more than 400 μm	0 %	31.12.2017
ex39199000	44	Printed laminated sheetwith a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),on one side covered with a layer of poly(vinyl fluoride),whether or not with a pressure sensitive adhesive layer and a release film on the other side,with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), andwith a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer	0 %	31.12.2017
ex39219060	95		0 %	31.12.2017
ex39202080	95	Polypropylene sheet, put up in rolls, with:flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)density range of 0,988 gm/cm3 or more but not more than 1,035 gm/cm3 (as determined by ASTM D792)moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)for use in the manufacture of insulators used in the electronics and electrical industries	0 %	31.12.2017
ex39206219	02	Co-extruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black	0 %	31.12.2013
ex39206219	08	Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:only dyed in the mass, ordyed in the mass and metallised on one side	0 %	31.12.2013
ex39206219	12	Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0 %	31.12.2013
ex39206219	18	Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0 %	31.12.2013
ex39206219	22	Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not more than 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm	0 %	31.12.2013
ex39206219	25	Film of poly(ethylene terephthalate) of a thickness of 186 μm or more but not more than 191 μm coated on one side with an acrylic layer in a matrix pattern	0 %	31.12.2014
ex39206219	38	Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm	0 %	31.12.2013
ex39206219	48	Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)	0 %	31.12.2015
ex39206219	52	Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method)	0 %	31.12.2013
ex39206219	55	Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45° and 18 measured at an angle of 60° using a gloss meter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more	0 %	31.12.2013
ex39206219	58	Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not more than 253 μm, coated on both sides with an antistatic layer	0 %	31.12.2013
ex39206219	76	Transparent poly(ethylene terephthalate) film:coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,with a light transmission of more than 93 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm	0 %	31.12.2013
ex39206219	81	Poly(ethylene terephthalate) film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm	0 %	31.12.2017
ex39209200	30	Polyamide film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm	0 %	31.12.2013
ex39209928	55	Thermoplastic polyurethane film extruded, with:not self-adhesive,an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),a total thickness of 0,38 mm or more, but not more than 7,6 mm,a width of 99 cm or more, but not more than 305 cm,of a kind used in the production of laminated safety glass	0 %	31.12.2017
ex39211310	20	Rolls of open-cell polyurethane foam:with a thickness of 2,29 mm (± 0,25 mm),surface-treated with a foraminous adhesion promoter, andlaminated to a polyester film and a layer of textile material	0 %	31.12.2017
ex39219055	20	Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or546,1 mm (± 2 mm) × 622,3 mm (± 2 mmfor use in the manufacture of printed circuit boards	0 %	31.12.2013
ex39269097	21	Television pedestal stands with or without bracket for fixation to and stabilisation of television cabinet case/body	0 %	31.12.2016
ex70200010	10
ex73269098	40
ex76169990	77
ex41044119	10	Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry	0 %	31.12.2017
ex70091000	10	Mirror-glass for rear-view mirrors:equipped with plastic backing plate,having the ability to reflect variable intensities of ambient light,whether or not equipped with a heating element, andwhether or not equipped with Blind Spot Module (BSM) display	0 %	31.12.2017
ex70191200	05	Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)	0 %	31.12.2017
ex70191200	25		0 %	31.12.2017
ex76071190	30	Laminated aluminium foil with:99 % or more of aluminium,a silica and water glass free hydrophilic coating,a total thickness of not more than 0,120 mm,a tensile strength of 100 N/mm2 or more (as determined by test method ASTM E8), andan elongation at break of 1 % or more	0 %	31.12.2013
ex76072090	20	Lubricating entry sheet of a total thickness of not more than 350 μm, comprising of:a layer of aluminium foil of a thickness of 70 μm or more but not more than 150 μm,a water soluble lubricant of a thickness of 20 μm or more but not more than 200 μm and solid at room temperature	0 %	31.12.2015
ex76169990	75	Parts in the shape of a rectangular frame:of painted aluminium,with a length of 1011 mm or more but not more than 1500 mm,with a width of 622 mm or more but not more than 900 mm,with a thickness of 0,6 mm (± 0,1 mm),of a kind used in the manufacture of TV sets	0 %	31.12.2017
ex81059000	10	Bars or wires made of cobalt alloy containing, by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium and7 % (± 2 %) ironconforming to the material specifications AMS 5842, of a kind used in the aerospace industry	0 %	31.12.2017
ex83016000	10	Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements	0 %	31.12.2015
ex84139100	20
ex84199085	20
ex84389000	10
ex84689000	10
ex84769000	10
ex84799080	87
ex84819000	20
ex85030099	45
ex85159000	20
ex85319085	20
ex85369085	96
ex85439000	50
ex87089199	10
ex87089997	30
ex90319085	30
ex83052000	10	Staples:of a length of 28 mm,unbent,packed in a plastic cartridge for use in copiers and printers resulting in a staple of a width of 12 mm (± 1 mm) and a depth of 8 mm (± 1 mm)	0 %	31.12.2013
ex84312000	30	Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427	0 %	31.12.2017
ex85011099	60	DC motorwith a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loadedwith a power supply voltage of 100 V or more but not more than 240 Vfor use in the manufacture of electric fryers	0 %	31.12.2017
ex85030099	40	Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501	0 %	31.12.2017
ex85044082	40	Printed circuit board equipped with a bridge rectifier circuit and other active and passive componentswith two output connectorswith two input connectors which are available and useable in parallelable to switch between bright and dimmed operation modewith an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, orwith an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, orwith an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation modewith an input current reaching 80 % of its nominal value within 20 mswith an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versionswith an maximum inrush current overshoot of not more than 250 % of the input currentwith a period of the inrush current overshoot of not more than 100 mswith an input current undershoot of not less than 50 % of the input currentwith a period of the inrush current undershoot of not more than 20 mswith a presettable output currentwith an output current reaching 90 % of its nominal pre-set value within 50 mswith an output current reaching zero within 30 ms after removal of the input voltagewith an defined failure status in case of no-load or too-high load (end-of-life function)	0 %	31.12.2017
ex85044082	50	Rectifier in a housing witha rated power of not more than 250 Wan input voltage of 90 V or more, but not more than 305 Va certified input frequency of 47 Hz or more, but not more than 440 Hza constant current output of 350 mA or more, but not more than 15 Aan inrush current of not more than 10 Aan operating temperature range of – 40 °C or more, but not more than + 85 °C,suitable for driving of LED-illuminants	0 %	31.12.2017
ex85051100	35	Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications	0 %	31.12.2017
ex85076000	25	Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm)a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm)a weight of 45,9 kg or 46,3 kga rating of 75 Ah anda nominal voltage of 60 V	0 %	31.12.2017
ex85076000	35	Lithium-ion rechargeable batteries, with:a length of 1475 mm or more, but not more than 1515 mm,a width of 1365 or more, but not more than 1375 mm,a height of 260 mm or more, but not more than 270 mm,a weight of 320 kg or more, but not more than 330 kg,a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,put up in packs of 12 or 16 modules	0 %	31.12.2017
ex85076000	50	Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 408 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 138 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda power of 458 kWh or more, but not more than 2158 kWh	0 %	31.12.2017
ex85169000	70	Inner potcontaining side and central openings,of annealed aluminium,with a ceramic coating, heat resistant to more than 200 °Cfor use in the manufacture of an electric fryer	0 %	31.12.2017
ex85229080	15	Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521	0 %	31.12.2017
ex85258019	45	Camera module with a resolution of 1280 * 720 P HD, with two microphones, for use in the manufacture of products of heading 8528	0 %	31.12.2017
ex85269120	80	Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with:a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner,a hard disk drive supporting multiple maps,a HD radio,a voice recognition system,a CD and DVD drive,Bluetooth, MP3 and USB input connectivity,a voltage of 10 V or more but not more than 16 V,for the use in the manufacture of vehicles in Chapter 87	0 %	31.12.2015
ex85272900	10		0 %	31.12.2015
ex85299092	70	Rectangular fastening and covering frame:of an aluminium alloy containing silicon and magnesium,with a length of 900 mm or more but not more than 1500 mm,with a width of 600 mm or more but not more than 950 mm,of a kind used for the production of TV sets	0 %	31.12.2017
ex85299092	80	Printed circuit board for backlight:with LED diodes equipped with prisms,whether or not with connector(s) fitted at one or both ends,to be incorporated in goods of heading 8528	0 %	31.12.2013
ex94054039	40		0 %	31.12.2013
ex85366990	51	SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528	0 %	31.12.2017
ex85402080	91	Photomultiplier	0 %	31.12.2016
ex85444290	30	PET insulated electric conductor with:10 or 80 individual wires,a length of 50 mm or more, but not more than 800 mm,connector(s) and/or plug(s) fitted at one or both ends,for use in the manufacture of products falling within headings 8521 and 8528	0 %	31.12.2017
ex90019000	25	Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material	0 %	31.12.2017
ex90029000	40	Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material	0 %	31.12.2017

ANNEX II

Products referred to in point (2) of Article 1Suspension relating to a product in the Annex to Regulation (EU) No 1344/2011 for which the CN or TARIC code or the product description is modified by this Regulation.

CN code	TARIC
ex20079950	40
ex20079950	50
ex20079950	60
ex20086019	30
ex20086039	30
ex20089948	20
ex20089948	93
ex20089949	50
ex28053090	40
ex28053090	50
ex28053090	60
ex28181091	10
ex29161995	30
ex29173995	10
ex29189990	40
ex29349990	12
ex32041100	10
ex32041100	20
ex32041700	25
ex32041700	45
ex32041700	55
ex32041700	60
ex32041700	70
ex32041900	72
ex32041900	73
ex38029000	11
ex38249097	08
ex38249097	31
ex38249097	70
ex38249097	72
ex38249097	73
ex38249097	75
ex39072020	11
ex39072020	12
ex39074000	10
ex39079990	30
ex39095090	10
ex39119099	75
ex39206219	01
ex39206219	03
ex39206219	07
ex39206219	09
ex39206219	11
ex39206219	13
ex39206219	17
ex39206219	19
ex39206219	21
ex39206219	23
ex39206219	24
ex39206219	26
ex39206219	37
ex39206219	39
ex39206219	47
ex39206219	49
ex39206219	51
ex39206219	53
ex39206219	54
ex39206219	56
ex39206219	57
ex39206219	59
ex39206219	75
ex39206219	77
ex39206219	81
ex39209200	30
ex39219055	20
ex70191200	05
ex70191200	25
ex73269098	40
ex76071190	30
ex76072090	20
ex81082000	20
ex81089050	40
ex81089050	80
ex83052000	10
ex85044082	40
ex85044082	50
ex85076000	50
ex85269120	80
ex85285980	10
ex85369085	96
ex85389099	94
ex85402080	91
ex85439000	50
ex87088099	10
ex94054039	30

Amendments and corrections
December 31, 2013	Repealed by 32013R1387
July 1, 2013	Application - See Art 2
June 29, 2013	Entry into force - Date pub. See Art 2

Council Regulation (EU) No 626/2013 of 27 June 2013 amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products