| CN code | TARIC | Description | Rate of autonomous duty | Date foreseen for mandatory review |
|---|
| ex20079950 | 81 | Acerola puree concentrate:- of the genus Malpighia spp.,
- with a sugar content by weight of 13 % or more but not more than 30 %
for use in the manufacture of products of food and drink industry | 9 % | 31.12.2017 |
| ex20079950 | 91 |
| ex20079950 | 82 | Acidified banana puree concentrate, obtained by cooking:- of the genus Musa cavendish,
- with a sugar content by weight of 13 % or more but not more than 30 %
for use in the manufacture of products of food and drink industry | 11,5 % | 31.12.2017 |
| ex20079950 | 92 |
| ex20079950 | 83 | Mango puree concentrate, obtained by cooking:- of the genus Mangifera spp.,
- with a sugar content by weight of not more than 30 %
for use in the manufacture of products of food and drink industry | 6 % | 31.12.2017 |
| ex20079950 | 93 |
| ex20079993 | 10 |
| ex20079950 | 84 | Papaya puree concentrate, obtained by cooking:- of the genus Carica spp.,
- with a sugar content by weight of 13 % or more but not more than 30 %
for use in the manufacture of products of food and drink industry | 7,8 % | 31.12.2017 |
| ex20079950 | 94 |
| ex20079950 | 85 | Guava puree concentrate, obtained by cooking:- of the genus Psidium spp.,
- with a sugar content by weight of 13 % or more but not more than 30 %
for use in the manufacture of products of food and drink industry | 6 % | 31.12.2017 |
| ex20079950 | 95 |
| ex28053090 | 40 | Rare earth metals, scandium and yttrium of a purity by weight of 95 % or more | 0 % | 31.12.2015 |
| ex28053090 | 50 |
| ex28053090 | 60 |
| ex28053090 | 70 |
| ex28053090 | 75 |
| ex28053090 | 79 |
| ex28111980 | 30 | Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry | 0 % | 31.12.2017 |
| ex28181091 | 10 | Sintered corundum with micro crystalline structure, containing by weight:- 94 % or more, but not more than 98,5 % of α-Al2O3,
- 2 % (± 1,5 %) of magnesium spinel,
- 1 % (± 0,6 %) of yttrium oxide and
- 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide
with less than 50 % of the total weight having a particle size of more than 10 mm | 0 % | 31.12.2015 |
| ex29033990 | 25 | 2,3,3,3-Tetrafluoroprop-1-ene (CAS RN 754-12-1) | 0 % | 31.12.2017 |
| ex29038990 | 50 | Chlorocyclopentane (CAS RN 930-28-9) | 0 % | 31.12.2017 |
| ex29053995 | 40 | Decane-1,10-diol (CAS RN 112-47-0) | 0 % | 31.12.2017 |
| ex29062900 | 30 | 2-Phenylethanol (CAS RN 60-12-8) | 0 % | 31.12.2017 |
| ex29072300 | 10 | 4,4’-Isopropylidenediphenol (CAS RN 80-05-7) | 0 % | 31.12.2017 |
| ex29072900 | 55 | Biphenyl-2,2’-diol (CAS RN 1806-29-7) | 0 % | 31.12.2017 |
| ex29122900 | 50 | 4-Isobutylbenzaldehyde (CAS RN 40150-98-9) | 0 % | 31.12.2017 |
| ex29145000 | 45 | 3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) | 0 % | 31.12.2017 |
| ex29147000 | 20 | 2,4-Difluorobenzophenone (CAS RN 342-25-6) | 0 % | 31.12.2017 |
| ex29153900 | 20 | Isopentyl acetate (CAS RN 123-92-2) | 0 % | 31.12.2017 |
| ex29156019 | 10 | Ethyl butyrate (CAS RN 105-54-4) | 0 % | 31.12.2017 |
| ex29159070 | 30 | 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) | 0 % | 31.12.2017 |
| ex29161200 | 70 | 2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3) | 0 % | 31.12.2017 |
| ex29171390 | 10 | Dimethyl sebacate (CAS RN 106-79-6) | 0 % | 31.12.2017 |
| ex29182900 | 35 | Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) | 0 % | 31.12.2017 |
| ex29183000 | 50 | Ethyl acetoacetate (CAS RN 141-97-9) | 0 % | 31.12.2017 |
| ex29189990 | 15 | Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) | 0 % | 31.12.2017 |
| ex29189990 | 40 | trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 537-98-4) | 0 % | 31.12.2013 |
| ex29209010 | 60 | 2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) | 0 % | 31.12.2017 |
| ex29213099 | 40 | Cyclopropylamin (CAS RN 765-30-0) | 0 % | 31.12.2017 |
| ex29221985 | 20 | 2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) | 0 % | 31.12.2017 |
| ex29221985 | 25 | Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2) | 0 % | 31.12.2017 |
| ex29291000 | 20 | Butyl isocyanate (CAS RN 111-36-4) | 0 % | 31.12.2017 |
| ex29319090 | 35 | (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) | 0 % | 31.12.2017 |
| ex29329900 | 25 | 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) | 0 % | 31.12.2017 |
| ex29331990 | 85 | Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioat (CAS RN 473799-16-5) | 0 % | 31.12.2017 |
| ex29332990 | 80 | Imazalil (ISO) (CAS RN 35554-44-0) | 0 % | 31.12.2017 |
| ex29333999 | 57 | Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) | 0 % | 31.12.2017 |
| ex29334910 | 30 | Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6) | 0 % | 31.12.2017 |
| ex29339980 | 43 | 2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7) | 0 % | 31.12.2017 |
| ex29339980 | 47 | Paclobutrazol (ISO) (CAS RN 76738-62-0) | 0 % | 31.12.2017 |
| ex29349990 | 37 | 4-Propan-2-ylmorpholine (CAS RN 1004-14-4) | 0 % | 31.12.2017 |
| ex32041100 | 20 | Dye C.I. Disperse Yellow 241 (CAS RN 83249-52-9), with a purity of 97 % or more as determined by high pressure liquid chromatography | 0 % | 31.12.2015 |
| ex32041100 | 80 | Dye preparation, non-ionogenic, containing:- N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)
- N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) and
- N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)
| 0 % | 31.12.2017 |
| ex32041200 | 20 | Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0) | 0 % | 31.12.2017 |
| ex32041200 | 30 | Acid dye preparation, anionic, containing:- lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),
- C.I. Acid Green 25 (CAS RN 4403-90-1) and
- C.I. Acid Blue 80 (CAS RN 4474-24-2)
| 0 % | 31.12.2017 |
| ex32041300 | 30 | Dye C.I. Basic Blue 7 (CAS RN 2390-60-5) | 0 % | 31.12.2017 |
| ex32041300 | 40 | Dye C.I. Basic Violet 1 (CAS RN 603-47-4)/(CAS RN 8004-87-3) | 0 % | 31.12.2017 |
| ex32041700 | 25 | Dye C.I. Pigment Yellow 14 (CAS RN 5468-75-7) | 0 % | 31.12.2016 |
| ex32041700 | 60 | Dye C.I. Pigment Red 53:1 (CAS RN 5160-02-1) | 0 % | 31.12.2016 |
| ex32041700 | 70 | Dye C.I. Pigment Yellow 13 (CAS RN 5102-83-0) | 0 % | 31.12.2016 |
| ex32041700 | 75 | Dye C.I. Pigment Orange 5 (CAS RN 3468-63-1) | 0 % | 31.12.2017 |
| ex32041900 | 73 | Dye C.I. Solvent Blue 104 (CAS RN 116-75-6) with a purity of 97 % or more determined by high pressure liquid chromatography | 0 % | 31.12.2015 |
| ex32074085 | 40 | Glass flakes (CAS RN 65997-17-3):- of a thickness of 0,3 μm or more but not more than 10 μm, and
- coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)
| 0 % | 31.12.2017 |
| ex32151900 | 20 | Ink:- consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),
- with a total solid content by weight of 55 % or more, but not more than 57 %, and
- with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,
used to imprint electrodes | 0 % | 31.12.2017 |
| ex37079020 | 50 | Dry ink powder or toner blend, consisting of:- styrene acrylate/butadiene copolymer
- either carbon black or an organic pigment
- whether or not containing polyolefin or amorphous silica
for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers | 0 % | 31.12.2017 |
| ex38029000 | 11 | Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products | 0 % | 31.12.2017 |
| ex38123080 | 75 | N,N’-Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) | 0 % | 31.12.2017 |
| ex38123080 | 80 | UV-stabiliser, consisting of:- a hindered amine: N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and
- either an o-hydroxyphenyl triazine UV light absorber or
- a chemically modified phenolic compound
| 0 % | 31.12.2017 |
| ex38123080 | 85 | Mixture containing by weight:- 70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and
- 20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)
| 0 % | 31.12.2016 |
| ex38249097 | 08 | Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0) | 0 % | 31.12.2014 |
| ex38249097 | 18 | Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 515136-48-8) | 0 % | 31.12.2013 |
| ex38249097 | 47 | Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:- 0,1 % or more but not more than 1 % of platinum, and
- 0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)
| 0 % | 31.12.2017 |
| ex38249097 | 49 | Preparation containing:- C,C’-azodi(formamide) (CAS RN 123-77-3),
- magnesium oxide (CAS RN 1309-48-4) and
- zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)
in which the gas formation from C,C’-azodi(formamide) occurs at 135 °C | 0 % | 31.12.2017 |
| ex38249097 | 51 | Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6) | 0 % | 31.12.2017 |
| ex38249097 | 87 | Paste containing by weight:- 75 % or more, but not more than 85 % of copper,
- inorganic oxides,
- ethyl cellulose, and
- a solvent
| 0 % | 31.12.2017 |
| ex38249097 | 93 | Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde (CAS RN 487-68-3) in acetone | 0 % | 31.12.2013 |
| ex38249097 | 94 | Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges | 0 % | 31.12.2013 |
| ex39053000 | 10 | Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors | 0 % | 31.12.2017 |
| ex39059100 | 20 | Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 13 % of the monomer unit ethylene | 0 % | 31.12.2017 |
| ex39069090 | 27 | Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate | 0 % | 31.12.2017 |
| ex39072020 | 20 | Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1) | 0 % | 31.12.2017 |
| ex39072020 | 30 | Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone | 0 % | 31.12.2013 |
| ex39072020 | 40 | Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100) | 0 % | 31.12.2013 |
| ex39074000 | 10 | Polycarbonate pellets:- containing 7 % or more but not more than 15 % by weight of non-halogen flame retardant, and
- with a specific gravity of 1,20 (± 0,01)
| 0 % | 31.12.2016 |
| ex39079990 | 30 | Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) | 0 % | 31.12.2015 |
| ex39139000 | 20 |
| ex39095090 | 10 | UV curable water soluble liquid photopolymer consisting of a mixture by weight of- 60 % or more of two-functional acrylated polyurethane oligomers and
- 30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and
- 10 % (± 3 %) of hydroxyl functionalised mono-functional (metha) acrylates
| 0 % | 31.12.2014 |
| ex39191080 | 47 | Polyester, polyurethane or polycarbonate foil:- with pressure sensitive silicone polymer adhesive,
- of a total thickness of not more than 0,7 mm,
- of a total width of 1 cm or more, but not more than 1 m,
- whether or not in rolls
of a kind used for the protection of the surface of products of headings 8521 and 8528 | 0 % | 31.12.2017 |
| ex39199000 | 32 |
| ex39191080 | 53 | Polyethylene foil:- with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,
- of a total thickness of 0,025 mm or more, but not more than 0,7 mm, and
- of a total width of 6 cm or more, but not more than 1 m,
- whether or not in rolls,
of a kind used for the protection of the surface of products of headings 8521 and 8528 | 0 % | 31.12.2017 |
| ex39199000 | 34 |
| ex39201028 | 93 |
| ex39201089 | 50 |
| ex39199000 | 36 | Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride)- whether or not with a pressure or heat sensitive adhesive layer
- whether or not with a release film
- with a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together
- with a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)
- with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 g/m2) with pressure sensitive layer
| 0 % | 31.12.2017 |
| ex39204910 | 95 |
| ex39199000 | 38 | Self-adhesive film composed of:- a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,
- whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,
- not more than 6 % by weight of other additives,
- a pressure sensitive adhesive; and
- covered on one side with a release liner,
- whether or not with a separate self-adhesive over laminate protective film,
- of a total thickness of not more than 400 μm
| 0 % | 31.12.2017 |
| ex39199000 | 40 | Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film:- containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or more
- having on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2
- coated on the other side with a pressure sensitive adhesive and a release liner
| 0 % | 31.12.2017 |
| ex39199000 | 42 | Self-adhesive film composed of:- a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,
- a second layer containing a maleic anhydride copolymer,
- a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,
- a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,
- a pressure sensitive adhesive; and
- covered on one side with a release liner
- whether or not with a separate self-adhesive over laminate protective film
- of a total thickness of not more than 400 μm
| 0 % | 31.12.2017 |
| ex39199000 | 44 | Printed laminated sheet- with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),
- on one side covered with a layer of poly(vinyl fluoride),
- whether or not with a pressure sensitive adhesive layer and a release film on the other side,
- with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,
- with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and
- with a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer
| 0 % | 31.12.2017 |
| ex39219060 | 95 |
| ex39202080 | 95 | Polypropylene sheet, put up in rolls, with:- flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)
- dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)
- tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)
- tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)
- density range of 0,988 gm/cm3 or more but not more than 1,035 gm/cm3 (as determined by ASTM D792)
- moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)
for use in the manufacture of insulators used in the electronics and electrical industries | 0 % | 31.12.2017 |
| ex39206219 | 02 | Co-extruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black | 0 % | 31.12.2013 |
| ex39206219 | 08 | Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:- only dyed in the mass, or
- dyed in the mass and metallised on one side
| 0 % | 31.12.2013 |
| ex39206219 | 12 | Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 % | 31.12.2013 |
| ex39206219 | 18 | Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 % | 31.12.2013 |
| ex39206219 | 22 | Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not more than 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm | 0 % | 31.12.2013 |
| ex39206219 | 25 | Film of poly(ethylene terephthalate) of a thickness of 186 μm or more but not more than 191 μm coated on one side with an acrylic layer in a matrix pattern | 0 % | 31.12.2014 |
| ex39206219 | 38 | Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm | 0 % | 31.12.2013 |
| ex39206219 | 48 | Sheets or rolls of poly(ethylene terephthalate):- coated on both sides with a layer of epoxy acrylic resin,
- of a total thickness of 37 μm (± 3 μm)
| 0 % | 31.12.2015 |
| ex39206219 | 52 | Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method) | 0 % | 31.12.2013 |
| ex39206219 | 55 | Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45° and 18 measured at an angle of 60° using a gloss meter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more | 0 % | 31.12.2013 |
| ex39206219 | 58 | Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not more than 253 μm, coated on both sides with an antistatic layer | 0 % | 31.12.2013 |
| ex39206219 | 76 | Transparent poly(ethylene terephthalate) film:- coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,
- with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,
- with a light transmission of more than 93 %,
- with a haze value of not more than 1,3 %,
- with a total thickness of 10 μm or more but not more than 350 μm,
- with a width of 800 mm or more but not more than 1600 mm
| 0 % | 31.12.2013 |
| ex39206219 | 81 | Poly(ethylene terephthalate) film:- of a thickness of not more than 20 μm,
- coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm
| 0 % | 31.12.2017 |
| ex39209200 | 30 | Polyamide film:- of a thickness of not more than 20 μm,
- coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm
| 0 % | 31.12.2013 |
| ex39209928 | 55 | Thermoplastic polyurethane film extruded, with:- not self-adhesive,
- an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),
- a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),
- a total thickness of 0,38 mm or more, but not more than 7,6 mm,
- a width of 99 cm or more, but not more than 305 cm,
of a kind used in the production of laminated safety glass | 0 % | 31.12.2017 |
| ex39211310 | 20 | Rolls of open-cell polyurethane foam:- with a thickness of 2,29 mm (± 0,25 mm),
- surface-treated with a foraminous adhesion promoter, and
- laminated to a polyester film and a layer of textile material
| 0 % | 31.12.2017 |
| ex39219055 | 20 | Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:- 469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or
- 469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or
- 546,1 mm (± 2 mm) × 622,3 mm (± 2 mm
for use in the manufacture of printed circuit boards | 0 % | 31.12.2013 |
| ex39269097 | 21 | Television pedestal stands with or without bracket for fixation to and stabilisation of television cabinet case/body | 0 % | 31.12.2016 |
| ex70200010 | 10 |
| ex73269098 | 40 |
| ex76169990 | 77 |
| ex41044119 | 10 | Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry | 0 % | 31.12.2017 |
| ex70091000 | 10 | Mirror-glass for rear-view mirrors:- equipped with plastic backing plate,
- having the ability to reflect variable intensities of ambient light,
- whether or not equipped with a heating element, and
- whether or not equipped with Blind Spot Module (BSM) display
| 0 % | 31.12.2017 |
| ex70191200 | 05 | Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm) | 0 % | 31.12.2017 |
| ex70191200 | 25 |
| ex76071190 | 30 | Laminated aluminium foil with:- 99 % or more of aluminium,
- a silica and water glass free hydrophilic coating,
- a total thickness of not more than 0,120 mm,
- a tensile strength of 100 N/mm2 or more (as determined by test method ASTM E8), and
- an elongation at break of 1 % or more
| 0 % | 31.12.2013 |
| ex76072090 | 20 | Lubricating entry sheet of a total thickness of not more than 350 μm, comprising of:- a layer of aluminium foil of a thickness of 70 μm or more but not more than 150 μm,
- a water soluble lubricant of a thickness of 20 μm or more but not more than 200 μm and solid at room temperature
| 0 % | 31.12.2015 |
| ex76169990 | 75 | Parts in the shape of a rectangular frame:- of painted aluminium,
- with a length of 1011 mm or more but not more than 1500 mm,
- with a width of 622 mm or more but not more than 900 mm,
- with a thickness of 0,6 mm (± 0,1 mm),
of a kind used in the manufacture of TV sets | 0 % | 31.12.2017 |
| ex81059000 | 10 | Bars or wires made of cobalt alloy containing, by weight:- 35 % (± 2 %) cobalt,
- 25 % (± 1 %) nickel,
- 19 % (± 1 %) chromium and
- 7 % (± 2 %) iron
conforming to the material specifications AMS 5842, of a kind used in the aerospace industry | 0 % | 31.12.2017 |
| ex83016000 | 10 | Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements | 0 % | 31.12.2015 |
| ex84139100 | 20 |
| ex84199085 | 20 |
| ex84389000 | 10 |
| ex84689000 | 10 |
| ex84769000 | 10 |
| ex84799080 | 87 |
| ex84819000 | 20 |
| ex85030099 | 45 |
| ex85159000 | 20 |
| ex85319085 | 20 |
| ex85369085 | 96 |
| ex85439000 | 50 |
| ex87089199 | 10 |
| ex87089997 | 30 |
| ex90319085 | 30 |
| ex83052000 | 10 | Staples:- of a length of 28 mm,
- unbent,
packed in a plastic cartridge for use in copiers and printers resulting in a staple of a width of 12 mm (± 1 mm) and a depth of 8 mm (± 1 mm) | 0 % | 31.12.2013 |
| ex84312000 | 30 | Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 | 0 % | 31.12.2017 |
| ex85011099 | 60 | DC motor- with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded
- with a power supply voltage of 100 V or more but not more than 240 V
for use in the manufacture of electric fryers | 0 % | 31.12.2017 |
| ex85030099 | 40 | Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501 | 0 % | 31.12.2017 |
| ex85044082 | 40 | Printed circuit board equipped with a bridge rectifier circuit and other active and passive components- with two output connectors
- with two input connectors which are available and useable in parallel
- able to switch between bright and dimmed operation mode
- with an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or
- with an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or
- with an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode
- with an input current reaching 80 % of its nominal value within 20 ms
- with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions
- with an maximum inrush current overshoot of not more than 250 % of the input current
- with a period of the inrush current overshoot of not more than 100 ms
- with an input current undershoot of not less than 50 % of the input current
- with a period of the inrush current undershoot of not more than 20 ms
- with a presettable output current
- with an output current reaching 90 % of its nominal pre-set value within 50 ms
- with an output current reaching zero within 30 ms after removal of the input voltage
- with an defined failure status in case of no-load or too-high load (end-of-life function)
| 0 % | 31.12.2017 |
| ex85044082 | 50 | Rectifier in a housing with- a rated power of not more than 250 W
- an input voltage of 90 V or more, but not more than 305 V
- a certified input frequency of 47 Hz or more, but not more than 440 Hz
- a constant current output of 350 mA or more, but not more than 15 A
- an inrush current of not more than 10 A
- an operating temperature range of – 40 °C or more, but not more than + 85 °C,
- suitable for driving of LED-illuminants
| 0 % | 31.12.2017 |
| ex85051100 | 35 | Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications | 0 % | 31.12.2017 |
| ex85076000 | 25 | Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:- a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm)
- a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)
- a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm)
- a weight of 45,9 kg or 46,3 kg
- a rating of 75 Ah and
- a nominal voltage of 60 V
| 0 % | 31.12.2017 |
| ex85076000 | 35 | Lithium-ion rechargeable batteries, with:- a length of 1475 mm or more, but not more than 1515 mm,
- a width of 1365 or more, but not more than 1375 mm,
- a height of 260 mm or more, but not more than 270 mm,
- a weight of 320 kg or more, but not more than 330 kg,
- a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,
- put up in packs of 12 or 16 modules
| 0 % | 31.12.2017 |
| ex85076000 | 50 | Modules for the assembly of batteries of ion lithium electric accumulators with:- a length of 298 mm or more, but not more than 408 mm,
- a width of 33,5 mm or more, but not more than 209 mm,
- a height of 138 mm or more, but not more than 228 mm,
- a weight of 3,6 kg or more, but not more than 17 kg, and
- a power of 458 kWh or more, but not more than 2158 kWh
| 0 % | 31.12.2017 |
| ex85169000 | 70 | Inner pot- containing side and central openings,
- of annealed aluminium,
- with a ceramic coating, heat resistant to more than 200 °C
for use in the manufacture of an electric fryer | 0 % | 31.12.2017 |
| ex85229080 | 15 | Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521 | 0 % | 31.12.2017 |
| ex85258019 | 45 | Camera module with a resolution of 1280 * 720 P HD, with two microphones, for use in the manufacture of products of heading 8528 | 0 % | 31.12.2017 |
| ex85269120 | 80 | Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with:- a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner,
- a hard disk drive supporting multiple maps,
- a HD radio,
- a voice recognition system,
- a CD and DVD drive,
- Bluetooth, MP3 and USB input connectivity,
- a voltage of 10 V or more but not more than 16 V,
for the use in the manufacture of vehicles in Chapter 87 | 0 % | 31.12.2015 |
| ex85272900 | 10 |
| ex85299092 | 70 | Rectangular fastening and covering frame:- of an aluminium alloy containing silicon and magnesium,
- with a length of 900 mm or more but not more than 1500 mm,
- with a width of 600 mm or more but not more than 950 mm,
of a kind used for the production of TV sets | 0 % | 31.12.2017 |
| ex85299092 | 80 | Printed circuit board for backlight:- with LED diodes equipped with prisms,
- whether or not with connector(s) fitted at one or both ends,
to be incorporated in goods of heading 8528 | 0 % | 31.12.2013 |
| ex94054039 | 40 |
| ex85366990 | 51 | SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 | 0 % | 31.12.2017 |
| ex85402080 | 91 | Photomultiplier | 0 % | 31.12.2016 |
| ex85444290 | 30 | PET insulated electric conductor with:- 10 or 80 individual wires,
- a length of 50 mm or more, but not more than 800 mm,
- connector(s) and/or plug(s) fitted at one or both ends,
for use in the manufacture of products falling within headings 8521 and 8528 | 0 % | 31.12.2017 |
| ex90019000 | 25 | Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material | 0 % | 31.12.2017 |
| ex90029000 | 40 | Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material | 0 % | 31.12.2017 |