Commission Implementing Regulation (EU) No 601/2013 of 24 June 2013 concerning the authorisation of cobalt(II) acetate tetrahydrate, cobalt(II) carbonate, cobalt(II) carbonate hydroxide (2:3) monohydrate, cobalt(II) sulphate heptahydrate and coated granulated cobalt(II) carbonate hydroxide (2:3) monohydrate as feed additives Text with EEA relevance
Modified by
  • Commission Implementing Regulation (EU) No 131/2014of 11 February 2014amending Implementing Regulation (EU) No 601/2013 concerning the authorisation of cobalt(II) acetate tetrahydrate, cobalt(II) carbonate, cobalt(II) carbonate hydroxide (2:3) monohydrate, cobalt(II) sulphate heptahydrate and coated granulated cobalt(II) carbonate hydroxide (2:3) monohydrate as feed additives(Text with EEA relevance), 32014R0131, February 12, 2014
Commission Implementing Regulation (EU) No 601/2013of 24 June 2013concerning the authorisation of cobalt(II) acetate tetrahydrate, cobalt(II) carbonate, cobalt(II) carbonate hydroxide (2:3) monohydrate, cobalt(II) sulphate heptahydrate and coated granulated cobalt(II) carbonate hydroxide (2:3) monohydrate as feed additives(Text with EEA relevance)
Article 1AuthorisationThe substances specified in the Annex, belonging to the additive category "nutritional additives" and to the functional group "compounds of trace elements", are authorised as additives in animal nutrition, subject to the conditions laid down in that Annex.
Article 1aAmendment to Commission Regulation (EC) No 1334/2003OJ L 187, 26.7.2003, p. 11.In the Annex to Regulation (EC) No 1334/2003, the entries "cobaltous acetate tetrahydrate", "basic cobaltous carbonate monohydrate" and "cobaltous sulphate heptahydrate", related to the element E3 Cobalt-Co, are deleted.
Article 2Transitional measuresThe substances specified in the Annex which were authorised by Directive 70/524/EEC and feed containing them, which are produced and labelled before 4 September 2014 in accordance with the rules applicable before 15 July 2013 may continue to be placed on the market and used until the existing stocks are exhausted. As regards feed intended for pet animals, the time period for production and labelling referred to in the first sentence shall end on 4 March 2016.
Article 3Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX
Details of the analytical methods are available at the following address of the Reference Laboratory: http://irmm.jrc.ec.europa.eu/EURLs/EURL_feed_additives/Pages/index.aspxOJ L 183, 29.6.1989, p. 1.OJ L 393, 30.12.1989, p. 18.OJ L 348, 28.11.1992, p. 1.OJ L 131, 5.5.1998, p. 11.OJ L 399, 30.12.1989, p. 18.OJ L 158, 30.4.2004, p. 50.Category of nutritional additives. Functional group: compounds of trace elements
Identification number of the additiveName of the holder of authorisationAdditiveComposition, chemical formula, description, analytical methodSpecies or category of animalMaximum ageMinimum contentMaximum contentOther provisionsEnd of period of authorisation
Element (Co) in mg/kg of complete feed with a moisture content of 12 %
3b301Cobalt(II) acetate tetrahydrateAdditive compositionCobalt(II) acetate tetrahydrate, as crystals/granules, with a minimum content of 23 % cobaltParticles < 50 μm: below 1 %Characterisation of the active substanceChemical formula: Co(CH3COO)2 × 4H2OCAS number: 6147-53-1Analytical methodsFor the identification of acetate in the additive:European Pharmacopoeia monograph 01/2008:20301.For the crystallographic characterisation of additive:X-Ray diffraction.For the determination of total cobalt in the additive, premixtures, compound feed and feed materials:EN 15510 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES)orCEN/TS 15621 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES) after pressure digestion.For determination of particle size distribution:ISO 13320:2009 — Particle size analysis — Laser diffraction methods.ruminants with a functional rumen, equidae, lagomorphs, rodents, herbivore reptiles and zoo mammals1 (total)1.The additive shall be incorporated into compound feed in the form of a premixture.2.Protective measures shall be taken according to national regulations implementing EU legislation on health and safety at work including Council Directives 89/391/EEC, 89/656/EEC, 92/85/EEC and 98/24/EC. Appropriate protective gloves, respiratory and eye protection according to Council Directive 89/686/EEC shall be worn during handling.3.Declarations to be made on the labelling of the additive and premixture:Cobalt content"It is recommended to limit the supplementation with Cobalt to 0,3 mg/kg in complete feed. In this context, the risk for Cobalt deficiency due to local conditions and the specific composition of the diet should be taken into account."4.Declarations to be made on the instructions of use of the compound feed:"Protective measures to avoid exposure with Cobalt by inhalation or by dermal route should be taken."15 July 2023
3b302Cobalt(II) carbonateAdditive compositionCobalt(II) carbonate, as powder, with a minimum content of 46 % cobaltCobalt carbonate: minimum 75 %Cobalt hydroxide: 3 % - 15 %Water: maximum 6 %Particles < 11 μm: below 90 %Characterisation of the active substancesChemical formula: CoCO3CAS number: 513-79-1Analytical methodsFor the identification of carbonate in the additive:European Pharmacopoeia monograph 01/2008:20301.For the crystallographic characterisation of additive:X-Ray diffraction.For the determination of total cobalt in the additive, premixtures, compound feed and feed materials:EN 15510 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES)orCEN/TS 15621 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES) after pressure digestion.For determination of particle size distribution:ISO 13320:2009 — Particle size analysis — Laser diffraction methods.ruminants with a functional rumen, equidae, lagomorphs, rodents, herbivore reptiles and zoo mammals1 (total)1.The additive shall be incorporated into compound feed in the form of a premixture. This compound feed shall be placed on the market in a non-powder form.2.Appropriate measures shall be taken to avoid the cobalt emission in the air and prevent the exposure by inhalation or by dermal route. If such measures are technically not feasible or not sufficient, protective measures shall be taken according to national regulations implementing EU legislation on health and safety at work including Directives 89/391/EEC, 89/656/EEC, 92/85/EEC, 98/24/EC and 2004/37/EC of the European Parliament and of the Council. Appropriate protective gloves, respiratory and eye protection according to Directive 89/686/EEC shall be worn during handling.3.Declarations to be made on the labelling of the additive and premixture:Cobalt content"It is recommended to limit the supplementation with Cobalt to 0,3 mg/kg in complete feed. In this context, the risk for Cobalt deficiency due to local conditions and the specific composition of the diet should be taken into account."4.Declarations to be made on the instructions of use of the compound feed:"Protective measures to avoid exposure with Cobalt by inhalation or by dermal route should be taken."15 July 2023
3b303Cobalt(II) carbonate hydroxide (2:3) monohydrateAdditive compositionCobalt (II) carbonate hydroxide (2:3) monohydrate, as powder, with a minimum content of 50 % cobaltParticles < 50 μm: below 98 %Characterisation of the active substanceChemical formula: 2CoCO3 × 3Co(OH)2 × H2OCAS number: 51839-24-8Analytical methodsFor the identification of carbonate in the additive:European Pharmacopoeia monograph 01/2008:20301.For the crystallographic characterisation of additive:X-Ray diffraction.For the determination of total cobalt in the additive, premixtures, compound feed and feed materials:EN 15510 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES)orCEN/TS 15621 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES) after pressure digestion.For determination of particle size distribution:ISO 13320:2009 — Particle size analysis — Laser diffraction methods.ruminants with a functional rumen, equidae, lagomorphs, rodents, herbivore reptiles and zoo mammals1 (total)1.The additive shall be incorporated into compound feed in the form of a premixture. This compound feed shall be placed on the market in a non-powder form.2.Appropriate measures shall be taken to avoid the cobalt emission in the air and prevent the exposure by inhalation or by dermal route. If such measures are technically not feasible or not sufficient, protective measures shall be taken according to national regulations implementing EU legislation on health and safety at work including Directives 89/391/EEC, 89/656/EEC, 92/85/EEC, 98/24/EC and 2004/37/EC. Appropriate protective gloves, respiratory and eye protection according to Directive 89/686/EEC shall be worn during handling.3.Declarations to be made on the labelling of the additive and premixture:Cobalt content"It is recommended to limit the supplementation with Cobalt to 0,3 mg/kg in complete feed. In this context, the risk for Cobalt deficiency due to local conditions and the specific composition of the diet should be taken into account."4.Declarations to be made on the instructions of use of the compound feed:"Protective measures to avoid exposure with Cobalt by inhalation or by dermal route should be taken."15 July 2023
3b304Coated granulated cobalt(II) carbonateAdditive compositionCoated granulated preparation of cobalt(II) carbonate with a cobalt content of 1 % - 5 %Coating agents (2,3 % - 3,0 %) and dispersants (choice of poly-oxy-ethylene, sorbitan monolaurate, glycerol polyethyleneglycol ricinoleate, polyethyleneglycol 300, sorbitol, and maltodextrin)Particles < 50 μm: below 1 %Characterisation of the active substanceChemical formula: CoCO3CAS number: 513-79-1Analytical methodsFor the identification of carbonate in the additive:European Pharmacopoeia monograph 01/2008:20301.For the crystallographic characterisation of additive:X-Ray diffraction.For the determination of total cobalt in the additive, premixtures, compound feed and feed materials:EN 15510 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES)orCEN/TS 15621 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES) after pressure digestion.For determination of particle size distribution:ISO 13320:2009 — Particle size analysis — Laser diffraction methods.ruminants with a functional rumen, equidae, lagomorphs, rodents, herbivore reptiles and zoo mammals1 (total)1.The additive shall be incorporated into feed in the form of a premixture.2.Protective measures shall be taken according to national regulations implementing EU legislation on health and safety at work including Directives 89/391/EEC, 89/656/EEC, 92/85/EEC and 98/24/EC. Appropriate protective gloves, respiratory and eye protection according to Directive 89/686/EEC shall be worn during handling.3.Declarations to be made on the labelling of the additive and premixture, if applicable:Cobalt content"It is recommended to limit the supplementation with Cobalt to 0,3 mg/kg in complete feed. In this context, the risk for Cobalt deficiency due to local conditions and the specific composition of the diet should be taken into account."15 July 2023
3b305Cobalt(II) sulphate heptahydrateAdditive compositionCobalt(II) sulphate heptahydrate, as powder, with a minimum content of 20 % cobaltParticles < 50 μm: below 95 %Characterisation of the active substanceChemical formula: CoSO4 × 7H2OCAS number: 10026-24-1Analytical methodsFor the identification of sulphate in the additive:European Pharmacopoeia monograph 01/2008:20301.For the crystallographic characterisation of additive:X-Ray diffraction.For the determination of total cobalt in the additive, premixtures, compound feed and feed materials:EN 15510 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES)orCEN/TS 15621 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES) after pressure digestion.For determination of particle size distribution:ISO 13320:2009 — Particle size analysis — Laser diffraction methods.ruminants with a functional rumen, equidae, lagomorphs, rodents, herbivore reptiles and zoo mammals1 (total)1.The additive shall be incorporated into compound feed in the form of a premixture. This compound feed shall be placed on the market in a non-powder form.2.Appropriate measures shall be taken to avoid the cobalt emission in the air and prevent the exposure by inhalation or by dermal route. If such measures are technically not feasible or not sufficient, protective measures shall be taken according to national regulations implementing EU legislation on health and safety at work including Directives 89/391/EEC, 89/656/EEC, 92/85/EEC, 98/24/EC and 2004/37/EC. Appropriate protective gloves, respiratory and eye protection according to Directive 89/686/EEC shall be worn during handling.3.Declarations to be made on the labelling of the additive and premixture:Cobalt content"It is recommended to limit the supplementation with Cobalt to 0,3 mg/kg in complete feed. In this context, the risk for Cobalt deficiency due to local conditions and the specific composition of the diet should be taken into account."4.Declarations to be made on the instructions of use of the compound feed:"Protective measures to avoid exposure with Cobalt by inhalation or by dermal route should be taken."15 July 2023

Loading ...