Article 1The Annex to Regulation (EU) No 1344/2011 is hereby amended as follows:(1)the rows for the products listed in Annex I to this Regulation are inserted;(2)the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 January 2013.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 17 December 2012.For the CouncilThe PresidentS. AletrarisANNEX I

Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993, p. 1).The specific additional duty is applicable.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of the Regulation (EEC) No 2454/93.

CN code	TARIC	Description	Rate of autonomous duty	Date foreseen for mandatory review
ex20086019ex20086039	3030	Sweet cherries containing added spirit, whether or not with a sugar content of 9 % by weight, of a diameter of not more than 19,9 mm, with stone, for use in chocolate products	10 %	30.6.2013
ex20089391	20	Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries	0 %	31.12.2017
ex20089949ex20089999	7011	Blanched vine leaves of the genus Karakishmish, in brine containing:14 % or more but not more 16 % (± 2 %) of salt,0,2 % or more but not more than 0,3 % (± 0,1 %) of citric acid, and0,03 % or more but not more than 0,05 % (± 0,01 %) of sodium benzoatefor use in the manufacture of stuffed vine leaves with rice	0 %	31.12.2017
ex20094930	91	Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than EUR 30 per 100 kg net weight,containing added sugarsused in the manufacture of products of food or drink industry	0 %	31.12.2014
ex28051990	10	Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2)	0 %	31.12.2017
ex28053090ex28053090ex28053090	405060	Rare earth metals, scandium and yttrium of a purity by weight of 98,5 % or more	0 %	31.12.2015
ex28164000	10	Barium hydroxide (CAS RN 17194-00-2)	0 %	31.12.2017
ex28230000	10	Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 1,2 μm or more but not more than 1,8 μmwith a specific surface of 5,0 m2/g or more, but not more than 7,5 m2/g	0 %	31.12.2017
ex28230000	20	Titanium dioxide (CAS RN 13463-67-7) with a purity by weight of 99,7 % or more and containing by weight:not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),not more than 0,01 % of phosphorus (expressed as elemental phosphorus),for use in the metallurgy	0 %	31.12.2017
ex28251000	10	Hydroxylammonium chloride (CAS RN 5470-11-1)	0 %	31.12.2017
ex28256000	10	Zirconium dioxide (CAS RN 1314-23-4)	0 %	31.12.2017
ex28351000	10	Sodium hypophosphite monohydrate (CAS RN 10039-56-2)	0 %	31.12.2017
ex28372000	20	Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)	0 %	31.12.2017
ex28391900	10	Disodium disilicate (CAS RN 13870-28-5)	0 %	31.12.2017
ex28418000	10	Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)	0 %	31.12.2017
ex28419085	10	Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3)	0 %	31.12.2017
ex28500020	30	Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4)	0 %	31.12.2017
ex29049095	40	4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)	0 %	31.12.2017
ex29051900	70	Titanium tetrabutanolate (CAS RN 5593-70-4)	0 %	31.12.2017
ex29051900	80	Titanium tetraisopropoxide (CAS RN 546-68-9)	0 %	31.12.2017
ex29089900	40	4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)	0 %	31.12.2017
ex29124900	20	4-Hydroxybenzaldehyde (CAS RN 123-08-0)	0 %	31.12.2017
ex29141990	20	Heptan-2-one (CAS RN 110-43-0)	0 %	31.12.2017
ex29141990	30	3-Methylbutanone (CAS RN 563-80-4)	0 %	31.12.2017
ex29141990	40	Pentan-2-one (CAS RN 107-87-9)	0 %	31.12.2017
ex29143900	30	Benzophenone (CAS RN 119-61-9)	0 %	31.12.2017
ex29143900	70	Benzil (CAS RN 134-81-6)	0 %	31.12.2017
ex29143900	80	4’-Methylacetophenone (CAS RN 122-00-9)	0 %	31.12.2017
ex29145000	60	2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)	0 %	31.12.2017
ex29145000	70	16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2)	0 %	31.12.2017
ex29159070	75	2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9)	0 %	31.12.2017
ex29161200	60	Octadecyl acrylate (CAS RN 4813-57-4)	0 %	31.12.2017
ex29163990	55	4-tert-Butylbenzoic acid (CAS RN 98-73-7)	0 %	31.12.2017
ex29163990	75	m-Toluic acid (CAS RN 99-04-7)	0 %	31.12.2017
ex29163990	85	(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)	0 %	31.12.2017
ex29171910	20	Diethyl malonate (CAS RN 105-53-3)	0 %	31.12.2017
ex29182900	70	Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8)	0 %	31.12.2017
ex29182900	80	Butyl 3,5-bis(1,1-dimethylethylene)-4-hydroxybenzenepropanoate (CAS RN 52449-44-2)	0 %	31.12.2017
ex29201900	10	Fenitrothion (ISO) (CAS RN 122-14-5)	0 %	31.12.2013
ex29211960	10	2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)	0 %	31.12.2017
ex29213099	30	1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)	0 %	31.12.2015
ex29214200	86	2,5-Dichloroaniline of a purity by weight of 99,5 % or more (CAS RN 95-82-9)	0 %	31.12.2017
ex29214200	87	N-Methylaniline (CAS RN 100-61-8)	0 %	31.12.2017
ex29214200	88	3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)	0 %	31.12.2017
ex29214300	80	6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)	0 %	31.12.2017
ex29214900	85	4-Isopropylaniline (CAS RN 99-88-7)	0 %	31.12.2017
ex29215990	30	3,3’-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)	0 %	31.12.2017
ex29215990	60	(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)	0 %	31.12.2017
ex29224985	20	3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)	0 %	31.12.2017
ex29224985	60	Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)	0 %	31.12.2017
ex29241900	80	Tetrabutylurea (CAS RN 4559-86-8)	0 %	31.12.2017
ex29242998	51	Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4)	0 %	31.12.2017
ex29242998	53	4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)	0 %	31.12.2017
ex29242998	86	Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6)	0 %	31.12.2017
ex29251995	20	4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)	0 %	31.12.2017
ex29251995	30	N,N’-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)	0 %	31.12.2017
ex29269095	18	Methyl cyanoacetate (CAS RN 105-34-0)	0 %	31.12.2017
ex29270000	80	4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)	0 %	31.12.2017
ex29280090	75	Metaflumizone (ISO) (CAS RN 139968-49-3)	0 %	31.12.2016
ex29280090	80	Cyflufenamid (ISO) (CAS RN 180409-60-3)	0 %	31.12.2013
ex29280090	85	Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)	0 %	31.12.2016
ex29302000	10	Prosulfocarb (ISO) (CAS RN 52888-80-9)	0 %	31.12.2017
ex29309099	66	Diphenyl sulphide (CAS RN 139-66-2)	0 %	31.12.2017
ex29309099	67	3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2)	0 %	31.12.2013
ex29309099	68	Clethodim (ISO) (CAS RN 99129-21-2)	0 %	31.12.2017
ex29309099	71	Triphenylsulphonium chloride (CAS RN 4270-70-6)	0 %	31.12.2013
ex29309099	83	Methyl-p-tolyl sulphone (CAS RN 3185-99-7)	0 %	31.12.2017
ex29319090	14	Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution	0 %	31.12.2017
ex29322090	20	Ethyl 6’-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9’-xanthene]-2’-carboxylate (CAS RN 154306-60-2)	0 %	31.12.2017
ex29322090	40	(S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9)	0 %	31.12.2017
ex29331990	40	Edaravone (INN) (CAS RN 89-25-8)	0 %	31.12.2013
ex29331990	80	3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)	0 %	31.12.2017
ex29332990	40	Triflumizole (ISO) (CAS RN 68694-11-1)	0 %	31.12.2013
ex29333999	12	2,3-Dichloropyridine (CAS RN 2402-77-9)	0 %	31.12.2017
ex29333999	18	6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)	0 %	31.12.2017
ex29333999	55	Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1)	0 %	31.12.2014
ex29335995	77	3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)	0 %	31.12.2017
ex29336980	55	Terbutryn (ISO) (CAS RN 886-50-0)	0 %	31.12.2015
ex29337900	30	5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)	0 %	31.12.2017
ex29339980	18	4,4’-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4)	0 %	31.12.2017
ex29339980	22	(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)	0 %	31.12.2017
ex29339980	24	1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)	0 %	31.12.2017
ex29339980	28	N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8)	0 %	31.12.2017
ex29339980	50	Metconazole (ISO) (CAS RN 125116-23-6)	3,2 %	31.12.2013
ex29339980	89	Carbendazim (ISO) (CAS RN 10605-21-7)	0 %	31.12.2013
ex29341000	15	4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)	0 %	31.12.2017
ex29341000	25	(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)	0 %	31.12.2017
ex29341000	35	(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)	0 %	31.12.2017
ex29342080	40	1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)	0 %	31.12.2017
ex29343090	10	2-Methylthiophenothiazine (CAS RN 7643-08-5)	0 %	31.12.2017
ex29349990	12	Morpholino phosphorodiamidate oligomers (morpholino oligonucleotides) intended for genetic research	0 %	31.12.2017
ex29349990	14	Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2)	0 %	31.12.2017
ex29349990	15	Carboxin (ISO) (CAS RN 5234-68-4)	0 %	31.12.2013
ex29349990	18	3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0)	0 %	31.12.2017
ex29349990	22	7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)	0 %	31.12.2017
ex29349990	23	Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)	0 %	31.12.2016
ex29349990	74	2-Isopropylthioxanthone (CAS RN 5495-84-1)	0 %	31.12.2017
ex29349990	83	Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7)	0 %	31.12.2014
ex29349990	84	Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1)	0 %	31.12.2014
ex29420000	10	N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)	0 %	31.12.2017
ex31025090	10	Natural sodium nitrate (CAS RN 7631-99-4)	0 %	31.12.2017
ex32041100	70	Dye C.I. Disperse Red 343	0 %	31.12.2017
ex32041300	20	(2,2’-(3,3’-Dioxidobiphenyl-4,4’-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1)	0 %	31.12.2017
ex32041500	10	Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43)	0 %	31.12.2017
ex32041700	30	Dye C.I. Pigment Yellow 97	0 %	31.12.2017
ex32041700	80	Dye C.I. Pigment Red 207	0 %	31.12.2017
ex32041700	85	Dye C.I. Pigment Blue 61	0 %	31.12.2017
ex32041700	88	Dye C.I. Pigment Violet 3	0 %	31.12.2017
ex32041900	84	Dye C.I. Solvent Blue 67	0 %	31.12.2017
ex32041900	85	Dye C.I. Solvent Red HPR	0 %	31.12.2017
ex32089019ex32089091	2520	Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight	0 %	31.12.2017
ex32089019	75	Acenaphthalene copolymer in ethyl lactate solution	0 %	31.12.2017
ex34021300	20	Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated	0 %	31.12.2017
ex38029000	11	Soda flux calcinated diatomaceous earth, acid washed, for use as filter aid in the manufacture of pharmaceutical and/or biochemical products	0 %	31.12.2017
ex38089190	10	Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide	0 %	31.12.2013
ex38089190	50	Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol suspension	0 %	31.12.2013
ex38089190	60	Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3’-ethoxy-5,6-dihydro spinosyn J) and (3’-ethoxy- spinosyn L)	0 %	31.12.2017
ex38089290	10	Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale	0 %	31.12.2013
ex38089315	10	Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension	0 %	31.12.2017
ex38112100	30	Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112100	40	Additives for lubricating oils, containing mineral oils, based on a mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-26-9), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112100	50	Additives for lubricating oils,based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),containing mineral oils,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112100	60	Additives for lubricating oils, containing mineral oils,based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112100	70	Additives for lubricating oils,containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112900	10	Additives for lubricating oils, consisting of reaction products of diphenylamine with branched nonene (CAS RN 36878-20-3 and CAS RN 27177-41-9), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112900	20	Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112900	30	Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112900	40	Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,05 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38112900	50	Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process	0 %	31.12.2017
ex38119000	30	Solution of a (dimethylamino)methyl-derivative of polyisobutylene phenol, containing by weight 10 % or more but not more than 19,9 % petroleum naphtha	0 %	31.12.2017
ex38119000	40	Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol	0 %	31.12.2017
ex38159090	16	Initiator based on dimethylaminopropyl urea	0 %	31.12.2017
ex38159090	18	Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO’)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)	0 %	31.12.2017
ex38159090	85	Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerisation of olefins	0 %	31.12.2017
ex38159090	89	Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile	0 %	31.12.2016
ex38249097	33	Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2) andtrihexylphosphine oxide (CAS RN 9084-48-8)	0 %	31.12.2016
ex38249097	35	Mixture of:3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) andethyl-6’-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9’-[9H]xanthene]-2’-carboxylate (CAS RN 154306-60-2)	0 %	31.12.2017
ex38249097	36	Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)	0 %	31.12.2017
ex38249097	37	Liquid crystal mixture for use in the manufacture of displays	0 %	31.12.2017
ex38249097	38	Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses	0 %	31.12.2017
ex38249097	41	Preparation, consisting of:dipropylene glycoltripropylene glycoltetrapropylene glycol andpentapropylene glycol	0 %	31.12.2017
ex38249097	43	Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators	0 %	31.12.2017
ex38249097	44	Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters	0 %	31.12.2017
ex38249097	70	Paste containing by weight 75 % or more, but not more than 85 % of copper, and also containing inorganic oxides, ethyl cellulose and a solvent	0 %	31.12.2017
ex38249097	78	Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight:60 % or more, but not more than 80 % of sitosterols,not more than 15 % of campesterols,not more than 5 % of stigmasterols,not more than 15 % of betasitostanols	0 %	31.12.2017
ex39039090ex39119099	3543	Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C	0 %	31.12.2013
ex39039090	86	Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene35 % or more but not more than 45 % of poly(phenylene ether)not more than 10 % of other additivesand with one or more of the following special colour effects:metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigmentfluorescent, as characterised by emitting light during absorption of ultraviolet radiationbright white, as characterised by L* not less than 92 and b* not more than 2 and a* between – 5 and 7 on the CIELab colour scale	0 %	31.12.2013
ex39046980	85	Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers	0 %	31.12.2017
ex39073000	60	Polyglycerol polyglycidyl ether resin (CAS RN 105521-63-9)	0 %	31.12.2017
ex39076080	50	Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of:not more than 75 μm of polyethylene,not more than 50 μm of polyamide,not more than 15 μm of polyethylene terephthalate andnot more than 9 μm of aluminiumwith a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa	0 %	31.12.2017
ex39079990	25	Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol	0 %	31.12.2017
ex39079990	60	Copolymer of terephthalic acid and isophthalic acid with bisphenol A	0 %	31.12.2017
ex39089000	60	Copolymer consisting of:hexanedioic acid12-aminododecanoic acidhexahydro-2H-azepin-2-one, and1,6-hexanediamine	0 %	31.12.2017
ex39094000	20	Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices	0 %	31.12.2015
ex39094000	30	Mixture of:alkylphenol — formaldehyde resin, whether or not brominated, andzinc oxide	0 %	31.12.2017
ex39100000	50	Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum	0 %	31.12.2017
ex39119019	30	Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide	0 %	31.12.2017
ex39119099	53	Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)	0 %	31.12.2017
ex39119099	57	Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)	0 %	31.12.2017
ex39191080ex39199000	4326	Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner	0 %	31.12.2014
ex39191080ex39199000	4545	Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm	0 %	31.12.2017
ex39191080ex39199000	5553	Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90o of more than 25 N/cm (as determined by the ASTM D 3330 method)	0 %	31.12.2017
ex39191080ex39199000	8528	Poly(vinyl chloride) or polyethylene or any other polyolefine film:of a thickness of 65 μm or more,coated on one side with an acrylic UV-sensitive adhesive and a polyester liner	0 %	31.12.2014
ex39199000	25	Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner	0 %	31.12.2017
ex39199000ex90012000	4740	Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side	0 %	31.12.2017
ex39201040	30	Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalised polymers of ethylene, consisting of:a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,covered on either side with two or more layers of polymeric material,and having an overall total thickness of not more than 110 μm	0 %	31.12.2017
ex39202029ex39202080	5593	Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of:a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,covered on either side with two or more layers of polymeric material,and having an overall total thickness of not more than 110 μm	0 %	31.12.2017
ex39202029	94	Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 70 μm	0 %	31.12.2016
ex39205100	40	Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)	0 %	31.12.2013
ex39206219	42	Poly(ethylene terephthalate) film, of a thickness of 18μm or more but not more than 25 μm, having:a shrinkage of 3,4 (± 0,1) % in the machine direction (as determined by the ASTM D 1204 method at 190 °C for 20 min) anda shrinkage of 0,3 (± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method at 190 °C for 20 min)	0 %	31.12.2013
ex39206219	81	Poly(ethylene terephthalate) film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm	0 %	31.12.2017
ex39207990	10	Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness of not more than 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal	0 %	31.12.2013
ex39209200	30	Polyamide film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm	0 %	31.12.2013
ex54071000	10	Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’–oxybis (phenyleneamine)	0 %	31.12.2017
ex56031110ex56031190	2020	Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins	0 %	31.12.2017
ex56031290	50	Non-woven:weighing 30 g/m2 or more, but not more than 60 g/m2,containing fibres of polypropylene or of polypropylene and polyethylene,whether or not printed, with:on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,and on other side a smooth untextured surface,for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles	0 %	31.12.2017
ex56031290ex56031390ex56039290ex56039390	70704010	Non-wovens of polypropylene,with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,with a weight of not more than 150 g/m2,in the piece or simply cut into squares or rectangles, andnot impregnated	0 %	31.12.2013
ex56039290ex56039490	7040	Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene	0 %	31.12.2013
ex56039290ex56039390	8050	Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch propertiesfor use in the manufacture of infant/child care products	0 %	31.12.2016
ex69091900	15	Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/– 0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight:90 % (± 1,5 %) of aluminium oxide7 % (± 1 %) of titanium oxide	0 %	31.12.2017
ex70051030	10	Float glass:of a thickness of 4,0 mm or more but not more than 4,2 mm,with a light transmission of 91 % or more measured using a D-type light source,coated on one surface with a fluorine doped tin dioxide reflective layer	0 %	31.12.2017
ex70191200ex70191200	0525	Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)	0 %	31.12.2013
ex70191910	15	S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm/+ 1,5 μm)	0 %	31.12.2017
ex73269098	40	TV pedestal stand with metal upper part for fixation and stabilisation of TV cabinet case/body	0 %	31.12.2016
ex76012020ex76012080	1010	Sheets and billets of secondary aluminium alloy containing lithium	0 %	31.12.2017
ex76042910ex76061299	1020	Sheets and bars of aluminium-lithium alloys	0 %	31.12.2015
ex76061292ex76071190	2020	Aluminium and magnesium alloy strip:in rolls,of a thickness of 0,14 mm or more but not more than 0,40 mm,a width of 12,5 mm or more but not more than 359 mm,a tensile strength of 285 N/mm2 or more, andan elongation at break of 1 % or more, andcontaining by weight:93,3 % or more of aluminium,2,2 % or more but not more than 5 % of magnesium, andnot more than 1,8 % of other elements	0 %	31.12.2017
ex76071190	30	Laminated aluminium foil with:99 % or more of aluminium,a silica and water glass free hydrophilic coating,a total thickness of not more than 0,120 mm,a tensile strength of 100 N/mm2 or more (as determined by test method ASTM E8), andan elongation at break of 1 % or more	0 %	30.6.2013
ex76072090	10	Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries	0 %	31.12.2017
ex81021000	10	Molybdenum powder witha purity by weight of 99 % or more anda particle size of 1,0 μm or more, but not more than 5,0 μm	0 %	31.12.2017
ex81089030	20	Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 87141000	0 %	31.12.2017
ex81089050	30	Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:exhaust systems for internal combustion engines ortubes and pipes of subheading 81089060	0 %	31.12.2017
ex81089050	40	Titanium-alloy sheets for the manufacture of structural parts of aircrafts	0 %	31.12.2017
ex81089050	50	Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium	0 %	31.12.2017
ex81089050	85	Plates, sheets, strip and foil of non-alloyed titanium	0 %	31.12.2017
ex81130090	10	Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits	0 %	31.12.2017
ex82073010	10	Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles	0 %	31.12.2017
ex84073300ex84079080ex84079090	101010	Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of heading 84331190,tractors of subheading 87019011, whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 orsnowploughs and snow blowers of subheading 843020	0 %	31.12.2017
ex84089043ex84089045ex84089047	302030	4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:a capacity of not more than 3850 cm3, anda rated output of 15 kW or more but not more than 55 kW,for use in the manufacture of vehicles of heading 8427	0 %	31.12.2017
ex84119900	30	Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,with a heat-resistance of not more than 1100 °C;with a diameter of 30 mm or more, but not more than 80 mm;with a height of 30 mm or more, but not more than 50 mm	0 %	31.12.2017
ex84818069	60	Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valvea brass valve body including valve slider and copper connectionswith a working pressure up to 4,5 MPa	0 %	31.12.2017
ex84833038	30	Cylindrical bearing housing:of precision-cast grey cast iron complying with standard DIN EN 1561,with oil chambers,without bearings,with a diameter of 60 mm or more, but not more than 180 mm,with a height of 60 mm or more, but not more than 120 mm,whether or not with water chambers and connectors	0 %	31.12.2017
ex85013100	70	DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 100 mm,a supply voltage of 12 V,an output at 20 °C of 300 W or more, but not more than 550 W,a torque 20 °C of 2,90 Nm or more, but not more than 5,30 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 1200 rpm,equipped with the rotor angle position sensor of resolver type or Hall effect type,of the kind used in power steering systems for cars	0 %	31.12.2017
ex85013300ex85014080ex85015350	305010	Electric drive for motor vehicles, with an output of not more than 315 kW, with:an AC or DC motor whether or not with transmission,power electronics	0 %	31.12.2016
ex85016200	30	Fuel cell systemconsisting of at least phosphoric acid fuel cells,in a housing with integrated water management and gas treatment,for permanent, stationary energy supply	0 %	31.12.2017
ex85043180	20	Transformer for use in the manufacture of inverters in LCD modules	0 %	31.12.2017
ex85043180	40	Electrical transformers:with a capacity of 1 kVA or lesswithout plugs or cables,for internal use in the manufacture of set top boxes and TVs	0 %	31.12.2017
ex85044082	40	Printed circuit board equipped with a bridge rectifier circuit and other active and passive componentswith two output connectorswith two input connectors which are available and useable in parallelable to switch between bright and dimmed operation modewith an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, orwith an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, orwith an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation modewith an input current reaching 80 % of its nominal value within 20 mswith an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versionswith an maximum inrush current overshoot of not more than 250 % of the input currentwith a period of the inrush current overshoot of not more than 100 mswith an input current undershoot of not less than 50 % of the input currentwith a period of the inrush current undershoot of not more than 20 mswith a presettable output currentwith an output current reaching 90 % of its nominal pre-set value within 50 mswith an output current reaching zero within 30 ms after removal of the input voltagewith an defined failure status in case of no-load or too-high load (end-of-life function)	0 %	30.6.2013
ex85044082	50	Transformer in a housing witha rated power of not more than 30 Wan input voltage of 90 V or more, but not more than 305 Van input frequency of 47 Hz or more, but not more than 63 Hza constant current output of 350 mA or more, but not more than 1050 mAan inrush current of not more than 10 Aan operating temperature range of – 20 °C or more, but not more than + 65 °C,suitable for driving LEDs	0 %	31.12.2017
ex85045095	50	Solenoid coil witha power consumption of not more than 6 W,an insulation resistance of more than 100 M ohms, andan insert hole of 11,4 mm or more, but not more than 11,8 mm	0 %	31.12.2017
ex85051100	33	Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre	0 %	31.12.2013
ex85051100	50	Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,of a kind to be used in the manufacture of electric servomotors for industrial automation	0 %	31.12.2017
ex85051100	60	Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, witha diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation	0 %	31.12.2017
ex85076000	40	Batteries of ion-lithium electric accumulators rechargeable with:a length of 1203 mm or more, but not more than 1297 mm,a width of 282 mm or more, but not more than 772 mm,a height of 792 mm or more, but not more than 839 mm,a weight of 260 kg or more, but not more than 293 kg,power of 22 kWh or 26 kWh, andconstituted of 24 or 48 modules	0 %	31.12.2017
ex85076000	50	Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 408 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 138 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda power of 485 kWh or more, but not more than 2158 kWh	0 %	31.12.2017
ex85076000	55	Lithium-ion accumulator in cylindrical form, with:a base similar to an ellipse squeezed in the middle,a length of 49 mm or more (not including terminals),a width of 33,5 mm or more,a thickness of 9,9 mm or more,a rated capacity of 1,75 Ah or more, anda rated voltage of 3,7 V,for the manufacture of rechargeable batteries	0 %	31.12.2017
ex85076000	57	Lithium-ion accumulator, cuboid in shape, with:some of the corners rounded off,a length of 76 mm or more (not including terminals),a width of 54,5 mm or more,a thickness of 5,2 mm or more,a rated capacity of 3100 mAh or more, anda rated voltage of 3,7 V,for the manufacture of rechargeable batteries	0 %	31.12.2017
ex85079080	70	Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (± 0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric vehicle batteries	0 %	31.12.2016
ex85182995	30	Loudspeakers of:an impedance of 4 Ohm or more, but not more than 16 Ohm,a nominal power of 2 W or more, but not more than 20 W,with or without plastic bracket, andwith or without electric cable fitted with connectors,of a kind used for TV sets and video monitors manufacture	0 %	31.12.2017
ex85229080	96	Hard disk drive, for incorporation in products of heading 8521	0 %	31.12.2017
ex85285940	20	Liquid crystal display colour video monitor having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less,either without housing, with back cover and mounting frame,or with a housing specially designed for mounting,suitable for the incorporation into goods of Chapters 84 to 90 and 94	0 %	31.12.2013
ex85299065	75	Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels	0 %	31.12.2017
ex85299092	47	Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel	0 %	31.12.2014
ex85299092	50	Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with backlight, micro-controller,with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,for use in the manufacture of vehicles of chapter 87	0 %	31.12.2015
ex85366990	81	Pitch connector for use in the manufacture of LCD television reception apparatus	0 %	31.12.2017
ex85366990	87	D-subminiature (D-sub) type connectors, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 and 8528	0 %	31.12.2016
ex85366990	88	Secure Digital (SD), CompactFlash, "Smart Card" and 64- pin PC-card female connectors, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1000 V	0 %	31.12.2017
ex85371091	30	Data processing and evaluation vehicle dashboard control module, operating through the CAN — bus protocol, containing at least:microprocessor relays,a stepper motor,Electrically Erasable Programmable Read-Only (EEPROM) memory, andother passive components (such as connectors, diodes, voltage stabiliser, resistors, capacitors, transistors),with a voltage of 13,5 V	0 %	31.12.2017
ex85439000	40	Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back	0 %	31.12.2017
ex85442000ex85444290ex85444993ex85444995	10202010	PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),a distance between conductors of not more than 0,5 mm anda pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm	0 %	31.12.2013
ex85444290	10	Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (± 0,25 V)connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,outer screening shielding,used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits	0 %	31.12.2013
ex85489090	50	Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528	0 %	31.12.2017
ex87042391	20	Motor chassis with a self-ignition capacity of at least 8000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm	0 %	31.12.2017
ex90012000	10	Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film	0 %	31.12.2017
ex90019000	75	Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules	0 %	31.12.2017
ex90021100	20	Lensesmeasuring not more than 80 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times,of a kind used for the production of visualisers or live image cameras	0 %	31.12.2017
ex90021100	30	Lensesmeasuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,with a resolution of 130 lines/mm or better, andwith a zoom ratio of 18 timesof a kind used for the production of visualisers or live image cameras	0 %	31.12.2017
ex90021100	40	Lensesmeasuring not more than 125 mm × 65 mm × 65 mm,with a resolution of 125 lines/mm or better, andwith a zoom ratio of 16 timesof a kind used for the production of visualisers or live image cameras	0 %	31.12.2017
ex90021100	70	Lensesmeasuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,with an etendue of 7 steradian mm2 or better, andwith a zoom ratio of 16 timesof a kind used for the production of visualisers or live image cameras	0 %	31.12.2017
ex90328900	40	Digital valve controller for controlling liquids and gases	0 %	31.12.2017
ex94054039	30	Electric light assembly containing:printed circuit boards andLight Emitting Diodes (LED)for the manufacture of backlight units for flat TV sets	0 %	30.6.2013

ANNEX II

CN code	TARIC
ex20086019	30
ex20086039	30
ex20089391	20
ex20094930	91
ex27101225	10
ex28053090	30
ex28230000	10
ex28351000	10
ex28391900	10
ex28418000	10
ex28419085	10
ex28500020	30
ex29041000	40
ex29141990	20
ex29141990	30
ex29141990	40
ex29143900	30
ex29143900	40
ex29145000	60
ex29145000	70
ex29163990	55
ex29173995	40
ex29182300	10
ex29201900	10
ex29213099	20
ex29213099	30
ex29215990	30
ex29224985	60
ex29242998	35
ex29242998	86
ex29280090	75
ex29280090	80
ex29280090	85
ex29302000	10
ex29309099	66
ex29309099	67
ex29309099	68
ex29309099	69
ex29309099	71
ex29309099	82
ex29309099	83
ex29329900	60
ex29331990	40
ex29332990	40
ex29333999	55
ex29336980	35
ex29336980	55
ex29337900	30
ex29339980	50
ex29339980	73
ex29339980	89
ex29342080	40
ex29349990	15
ex29349990	23
ex29349990	74
ex29349990	78
ex29349990	83
ex29349990	84
ex32041500	10
ex32041700	30
ex32041700	75
ex32089019	75
ex32089091	10
ex34021300	20
ex38089190	10
ex38089190	50
ex38089290	10
ex38089315	10
ex38089327	20
ex38151990	41
ex38159090	16
ex38159090	85
ex38159090	89
ex38249097	33
ex38249097	36
ex38249097	37
ex38249097	38
ex38249097	44
ex38249097	47
ex38249097	70
ex38249097	78
ex39011010	10
ex39012090	30
ex39039090	35
ex39039090	86
ex39061000	10
ex39079990	60
ex39094000	20
ex39100000	50
ex39119019	30
ex39191080	45
ex39191080	55
ex39199000	25
ex39199000	26
ex39199000	28
ex39199000	45
ex39199000	47
ex39199000	53
ex39199000	55
ex39202029	94
ex39205100	10
ex39205100	40
ex39206219	41
ex39206219	43
ex39206219	80
ex39206219	82
ex39207990	10
ex39209200	30
ex54071000	10
ex56031110	20
ex56031190	20
ex56031290	50
ex56031290	70
ex56031390	70
ex56039290	40
ex56039290	70
ex56039290	80
ex56039390	10
ex56039390	50
ex56039490	40
ex70051025	10
ex70051030	10
ex70060090	60
ex70071920	20
ex73269098	40
ex74102200	10
ex76012099	10
ex76042910	10
ex76061292	20
ex76061299	20
ex76071190	20
ex76071190	30
ex76072090	10
ex81089030	20
ex81089050	30
ex81089050	40
ex81089050	50
ex81130090	10
ex84073100	10
ex84073300	10
ex84079080	10
ex84079090	10
ex84122180	50
ex84198998	30
ex84198998	40
ex84622180	10
ex84775980	10
ex85013300	30
ex85014080	50
ex85015350	10
ex85043180	20
ex85044082	40
ex85051100	33
ex85079080	70
ex85229080	96
ex85285940	20
ex85299049	10
ex85299065	75
ex85299065	80
ex85299092	46
ex85299092	47
ex85299092	50
ex85299092	60
ex85366990	81
ex85366990	87
ex85409100	95
ex85439000	40
ex85444290	10
ex85444993	20
ex87042391	20
ex90012000	10
ex90012000	40
ex90019000	75
ex90321089	20
ex90328900	40
ex94054039	30

Amendments and corrections
December 31, 2013	Repealed by 32013R1387
January 1, 2013	Application - See Art 2
December 20, 2012	Entry into force - Date pub. See Art 2

Council Regulation (EU) No 1232/2012 of 17 December 2012 amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products