Council Regulation (EU) No 1232/2012 of 17 December 2012 amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products
Council Regulation (EU) No 1232/2012of 17 December 2012amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:(1)It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on certain new products which are not currently listed in the Annex to Council Regulation (EU) No 1344/2011OJ L 349, 31.12.2011, p. 1..(2)It is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties for 39 of the products which are currently listed in the Annex to Regulation (EU) No 1344/2011. Accordingly those products should be deleted.(3)It is necessary to modify the product description of 56 suspensions in the Annex to Regulation (EU) No 1344/2011 in order to take account of technical product developments and economic trends on the market as well as linguistic adaptations. Moreover, TARIC codes for four products should be changed. In addition, double classification is considered necessary for three products, whereas for two products multiple classification is no longer necessary.(4)Those suspensions for which technical modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1344/2011 and should be reinserted in that list with new product descriptions or new CN or TARIC codes.(5)A number of products were reviewed by the Commission in accordance with Article 2(2) and (3) of Regulation (EU) No 1344/2011. It is in the interest of the Union to provide for a new mandatory review of those products. The reviewed suspensions should therefore be deleted from the list of suspensions set out in the Annex to Regulation (EU) No 1344/2011 and reinserted in that list with new time limits for a mandatory review.(6)In view of their temporary nature, the suspensions listed in Annex I to this Regulation should be reviewed systematically, five years after their application or renewal. Moreover, closure of certain suspensions should be warranted at any time, following a proposal of the Commission on the basis of a review carried out on initiative of the Commission or at the request of one or more Member States, on the grounds that the suspensions are no longer in the Union’s interest to be maintained, or due to technical product developments, changed circumstances or economic trends on the market.(7)Since it is necessary that the suspensions laid down in this Regulation take effect from 1 January 2013, this Regulation should apply from the same date and enter into force immediately upon its publication in the Official Journal of the European Union,HAS ADOPTED THIS REGULATION:
Article 1The Annex to Regulation (EU) No 1344/2011 is hereby amended as follows:(1)the rows for the products listed in Annex I to this Regulation are inserted;(2)the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.
Article 2This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 January 2013.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 17 December 2012.For the CouncilThe PresidentS. AletrarisANNEX I
Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993, p. 1).The specific additional duty is applicable.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of the Regulation (EEC) No 2454/93.
CN codeTARICDescriptionRate of autonomous dutyDate foreseen for mandatory review
ex20086019ex200860393030Sweet cherries containing added spirit, whether or not with a sugar content of 9 % by weight, of a diameter of not more than 19,9 mm, with stone, for use in chocolate products10 %30.6.2013
ex2008939120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries0 %31.12.2017
ex20089949ex200899997011Blanched vine leaves of the genus Karakishmish, in brine containing:14 % or more but not more 16 % (± 2 %) of salt,0,2 % or more but not more than 0,3 % (± 0,1 %) of citric acid, and0,03 % or more but not more than 0,05 % (± 0,01 %) of sodium benzoatefor use in the manufacture of stuffed vine leaves with rice0 %31.12.2017
ex2009493091Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than EUR 30 per 100 kg net weight,containing added sugarsused in the manufacture of products of food or drink industry0 %31.12.2014
ex2805199010Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2)0 %31.12.2017
ex28053090ex28053090ex28053090405060Rare earth metals, scandium and yttrium of a purity by weight of 98,5 % or more0 %31.12.2015
ex2816400010Barium hydroxide (CAS RN 17194-00-2)0 %31.12.2017
ex2823000010Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 1,2 μm or more but not more than 1,8 μmwith a specific surface of 5,0 m2/g or more, but not more than 7,5 m2/g0 %31.12.2017
ex2823000020Titanium dioxide (CAS RN 13463-67-7) with a purity by weight of 99,7 % or more and containing by weight:not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),not more than 0,01 % of phosphorus (expressed as elemental phosphorus),for use in the metallurgy0 %31.12.2017
ex2825100010Hydroxylammonium chloride (CAS RN 5470-11-1)0 %31.12.2017
ex2825600010Zirconium dioxide (CAS RN 1314-23-4)0 %31.12.2017
ex2835100010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %31.12.2017
ex2837200020Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)0 %31.12.2017
ex2839190010Disodium disilicate (CAS RN 13870-28-5)0 %31.12.2017
ex2841800010Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)0 %31.12.2017
ex2841908510Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3)0 %31.12.2017
ex2850002030Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4)0 %31.12.2017
ex29049095404-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)0 %31.12.2017
ex2905190070Titanium tetrabutanolate (CAS RN 5593-70-4)0 %31.12.2017
ex2905190080Titanium tetraisopropoxide (CAS RN 546-68-9)0 %31.12.2017
ex29089900404,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)0 %31.12.2017
ex29124900204-Hydroxybenzaldehyde (CAS RN 123-08-0)0 %31.12.2017
ex2914199020Heptan-2-one (CAS RN 110-43-0)0 %31.12.2017
ex29141990303-Methylbutanone (CAS RN 563-80-4)0 %31.12.2017
ex2914199040Pentan-2-one (CAS RN 107-87-9)0 %31.12.2017
ex2914390030Benzophenone (CAS RN 119-61-9)0 %31.12.2017
ex2914390070Benzil (CAS RN 134-81-6)0 %31.12.2017
ex29143900804’-Methylacetophenone (CAS RN 122-00-9)0 %31.12.2017
ex29145000602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %31.12.2017
ex291450007016α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2)0 %31.12.2017
ex29159070752,2-Dimethylbutyryl chloride (CAS RN 5856-77-9)0 %31.12.2017
ex2916120060Octadecyl acrylate (CAS RN 4813-57-4)0 %31.12.2017
ex29163990554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %31.12.2017
ex2916399075m-Toluic acid (CAS RN 99-04-7)0 %31.12.2017
ex2916399085(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)0 %31.12.2017
ex2917191020Diethyl malonate (CAS RN 105-53-3)0 %31.12.2017
ex2918290070Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8)0 %31.12.2017
ex2918290080Butyl 3,5-bis(1,1-dimethylethylene)-4-hydroxybenzenepropanoate (CAS RN 52449-44-2)0 %31.12.2017
ex2920190010Fenitrothion (ISO) (CAS RN 122-14-5)0 %31.12.2013
ex29211960102-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)0 %31.12.2017
ex29213099301,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)0 %31.12.2015
ex29214200862,5-Dichloroaniline of a purity by weight of 99,5 % or more (CAS RN 95-82-9)0 %31.12.2017
ex2921420087N-Methylaniline (CAS RN 100-61-8)0 %31.12.2017
ex29214200883,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)0 %31.12.2017
ex29214300806-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)0 %31.12.2017
ex29214900854-Isopropylaniline (CAS RN 99-88-7)0 %31.12.2017
ex29215990303,3’-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %31.12.2017
ex2921599060(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)0 %31.12.2017
ex29224985203-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)0 %31.12.2017
ex2922498560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %31.12.2017
ex2924190080Tetrabutylurea (CAS RN 4559-86-8)0 %31.12.2017
ex2924299851Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4)0 %31.12.2017
ex29242998534-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)0 %31.12.2017
ex2924299886Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6)0 %31.12.2017
ex29251995204,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)0 %31.12.2017
ex2925199530N,N’-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)0 %31.12.2017
ex2926909518Methyl cyanoacetate (CAS RN 105-34-0)0 %31.12.2017
ex29270000804-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)0 %31.12.2017
ex2928009075Metaflumizone (ISO) (CAS RN 139968-49-3)0 %31.12.2016
ex2928009080Cyflufenamid (ISO) (CAS RN 180409-60-3)0 %31.12.2013
ex2928009085Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)0 %31.12.2016
ex2930200010Prosulfocarb (ISO) (CAS RN 52888-80-9)0 %31.12.2017
ex2930909966Diphenyl sulphide (CAS RN 139-66-2)0 %31.12.2017
ex29309099673-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2)0 %31.12.2013
ex2930909968Clethodim (ISO) (CAS RN 99129-21-2)0 %31.12.2017
ex2930909971Triphenylsulphonium chloride (CAS RN 4270-70-6)0 %31.12.2013
ex2930909983Methyl-p-tolyl sulphone (CAS RN 3185-99-7)0 %31.12.2017
ex2931909014Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution0 %31.12.2017
ex2932209020Ethyl 6’-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9’-xanthene]-2’-carboxylate (CAS RN 154306-60-2)0 %31.12.2017
ex2932209040(S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9)0 %31.12.2017
ex2933199040Edaravone (INN) (CAS RN 89-25-8)0 %31.12.2013
ex29331990803-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)0 %31.12.2017
ex2933299040Triflumizole (ISO) (CAS RN 68694-11-1)0 %31.12.2013
ex29333999122,3-Dichloropyridine (CAS RN 2402-77-9)0 %31.12.2017
ex29333999186-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)0 %31.12.2017
ex2933399955Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1)0 %31.12.2014
ex29335995773-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)0 %31.12.2017
ex2933698055Terbutryn (ISO) (CAS RN 886-50-0)0 %31.12.2015
ex29337900305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %31.12.2017
ex29339980184,4’-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4)0 %31.12.2017
ex2933998022(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)0 %31.12.2017
ex29339980241,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)0 %31.12.2017
ex2933998028N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8)0 %31.12.2017
ex2933998050Metconazole (ISO) (CAS RN 125116-23-6)3,2 %31.12.2013
ex2933998089Carbendazim (ISO) (CAS RN 10605-21-7)0 %31.12.2013
ex29341000154-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)0 %31.12.2017
ex2934100025(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)0 %31.12.2017
ex2934100035(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)0 %31.12.2017
ex29342080401,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)0 %31.12.2017
ex29343090102-Methylthiophenothiazine (CAS RN 7643-08-5)0 %31.12.2017
ex2934999012Morpholino phosphorodiamidate oligomers (morpholino oligonucleotides) intended for genetic research0 %31.12.2017
ex2934999014Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2)0 %31.12.2017
ex2934999015Carboxin (ISO) (CAS RN 5234-68-4)0 %31.12.2013
ex29349990183,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0)0 %31.12.2017
ex29349990227-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)0 %31.12.2017
ex2934999023Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)0 %31.12.2016
ex29349990742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %31.12.2017
ex2934999083Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7)0 %31.12.2014
ex2934999084Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1)0 %31.12.2014
ex2942000010N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)0 %31.12.2017
ex3102509010Natural sodium nitrate (CAS RN 7631-99-4)0 %31.12.2017
ex3204110070Dye C.I. Disperse Red 3430 %31.12.2017
ex3204130020(2,2’-(3,3’-Dioxidobiphenyl-4,4’-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1)0 %31.12.2017
ex3204150010Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43)0 %31.12.2017
ex3204170030Dye C.I. Pigment Yellow 970 %31.12.2017
ex3204170080Dye C.I. Pigment Red 2070 %31.12.2017
ex3204170085Dye C.I. Pigment Blue 610 %31.12.2017
ex3204170088Dye C.I. Pigment Violet 30 %31.12.2017
ex3204190084Dye C.I. Solvent Blue 670 %31.12.2017
ex3204190085Dye C.I. Solvent Red HPR0 %31.12.2017
ex32089019ex320890912520Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight0 %31.12.2017
ex3208901975Acenaphthalene copolymer in ethyl lactate solution0 %31.12.2017
ex3402130020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %31.12.2017
ex3802900011Soda flux calcinated diatomaceous earth, acid washed, for use as filter aid in the manufacture of pharmaceutical and/or biochemical products0 %31.12.2017
ex3808919010Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide0 %31.12.2013
ex3808919050Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol suspension0 %31.12.2013
ex3808919060Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3’-ethoxy-5,6-dihydro spinosyn J) and (3’-ethoxy- spinosyn L)0 %31.12.2017
ex3808929010Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale0 %31.12.2013
ex3808931510Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension0 %31.12.2017
ex3811210030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811210040Additives for lubricating oils, containing mineral oils, based on a mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-26-9), used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811210050Additives for lubricating oils,based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),containing mineral oils,used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811210060Additives for lubricating oils, containing mineral oils,based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811210070Additives for lubricating oils,containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811290010Additives for lubricating oils, consisting of reaction products of diphenylamine with branched nonene (CAS RN 36878-20-3 and CAS RN 27177-41-9), used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811290020Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811290030Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811290040Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,05 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811290050Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %31.12.2017
ex3811900030Solution of a (dimethylamino)methyl-derivative of polyisobutylene phenol, containing by weight 10 % or more but not more than 19,9 % petroleum naphtha0 %31.12.2017
ex3811900040Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol0 %31.12.2017
ex3815909016Initiator based on dimethylaminopropyl urea0 %31.12.2017
ex3815909018Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO’)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)0 %31.12.2017
ex3815909085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerisation of olefins0 %31.12.2017
ex3815909089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile0 %31.12.2016
ex3824909733Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2) andtrihexylphosphine oxide (CAS RN 9084-48-8)0 %31.12.2016
ex3824909735Mixture of:3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) andethyl-6’-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9’-[9H]xanthene]-2’-carboxylate (CAS RN 154306-60-2)0 %31.12.2017
ex3824909736Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)0 %31.12.2017
ex3824909737Liquid crystal mixture for use in the manufacture of displays0 %31.12.2017
ex3824909738Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses0 %31.12.2017
ex3824909741Preparation, consisting of:dipropylene glycoltripropylene glycoltetrapropylene glycol andpentapropylene glycol0 %31.12.2017
ex3824909743Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators0 %31.12.2017
ex3824909744Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters0 %31.12.2017
ex3824909770Paste containing by weight 75 % or more, but not more than 85 % of copper, and also containing inorganic oxides, ethyl cellulose and a solvent0 %31.12.2017
ex3824909778Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight:60 % or more, but not more than 80 % of sitosterols,not more than 15 % of campesterols,not more than 5 % of stigmasterols,not more than 15 % of betasitostanols0 %31.12.2017
ex39039090ex391190993543Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C0 %31.12.2013
ex3903909086Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene35 % or more but not more than 45 % of poly(phenylene ether)not more than 10 % of other additivesand with one or more of the following special colour effects:metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigmentfluorescent, as characterised by emitting light during absorption of ultraviolet radiationbright white, as characterised by L* not less than 92 and b* not more than 2 and a* between – 5 and 7 on the CIELab colour scale0 %31.12.2013
ex3904698085Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers0 %31.12.2017
ex3907300060Polyglycerol polyglycidyl ether resin (CAS RN 105521-63-9)0 %31.12.2017
ex3907608050Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of:not more than 75 μm of polyethylene,not more than 50 μm of polyamide,not more than 15 μm of polyethylene terephthalate andnot more than 9 μm of aluminiumwith a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa0 %31.12.2017
ex3907999025Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol0 %31.12.2017
ex3907999060Copolymer of terephthalic acid and isophthalic acid with bisphenol A0 %31.12.2017
ex3908900060Copolymer consisting of:hexanedioic acid12-aminododecanoic acidhexahydro-2H-azepin-2-one, and1,6-hexanediamine0 %31.12.2017
ex3909400020Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices0 %31.12.2015
ex3909400030Mixture of:alkylphenol — formaldehyde resin, whether or not brominated, andzinc oxide0 %31.12.2017
ex3910000050Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum0 %31.12.2017
ex3911901930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %31.12.2017
ex3911909953Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)0 %31.12.2017
ex3911909957Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)0 %31.12.2017
ex39191080ex391990004326Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner0 %31.12.2014
ex39191080ex391990004545Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %31.12.2017
ex39191080ex391990005553Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90o of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %31.12.2017
ex39191080ex391990008528Poly(vinyl chloride) or polyethylene or any other polyolefine film:of a thickness of 65 μm or more,coated on one side with an acrylic UV-sensitive adhesive and a polyester liner0 %31.12.2014
ex3919900025Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner0 %31.12.2017
ex39199000ex900120004740Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side0 %31.12.2017
ex3920104030Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalised polymers of ethylene, consisting of:a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,covered on either side with two or more layers of polymeric material,and having an overall total thickness of not more than 110 μm0 %31.12.2017
ex39202029ex392020805593Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of:a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,covered on either side with two or more layers of polymeric material,and having an overall total thickness of not more than 110 μm0 %31.12.2017
ex3920202994Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 70 μm0 %31.12.2016
ex3920510040Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)0 %31.12.2013
ex3920621942Poly(ethylene terephthalate) film, of a thickness of 18μm or more but not more than 25 μm, having:a shrinkage of 3,4 (± 0,1) % in the machine direction (as determined by the ASTM D 1204 method at 190 °C for 20 min) anda shrinkage of 0,3 (± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method at 190 °C for 20 min)0 %31.12.2013
ex3920621981Poly(ethylene terephthalate) film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm0 %31.12.2017
ex3920799010Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness of not more than 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal0 %31.12.2013
ex3920920030Polyamide film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm0 %31.12.2013
ex5407100010Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’–oxybis (phenyleneamine)0 %31.12.2017
ex56031110ex560311902020Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins0 %31.12.2017
ex5603129050Non-woven:weighing 30 g/m2 or more, but not more than 60 g/m2,containing fibres of polypropylene or of polypropylene and polyethylene,whether or not printed, with:on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,and on other side a smooth untextured surface,for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles0 %31.12.2017
ex56031290ex56031390ex56039290ex5603939070704010Non-wovens of polypropylene,with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,with a weight of not more than 150 g/m2,in the piece or simply cut into squares or rectangles, andnot impregnated0 %31.12.2013
ex56039290ex560394907040Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene0 %31.12.2013
ex56039290ex560393908050Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch propertiesfor use in the manufacture of infant/child care products0 %31.12.2016
ex6909190015Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/– 0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight:90 % (± 1,5 %) of aluminium oxide7 % (± 1 %) of titanium oxide0 %31.12.2017
ex7005103010Float glass:of a thickness of 4,0 mm or more but not more than 4,2 mm,with a light transmission of 91 % or more measured using a D-type light source,coated on one surface with a fluorine doped tin dioxide reflective layer0 %31.12.2017
ex70191200ex701912000525Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)0 %31.12.2013
ex7019191015S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm/+ 1,5 μm)0 %31.12.2017
ex7326909840TV pedestal stand with metal upper part for fixation and stabilisation of TV cabinet case/body0 %31.12.2016
ex76012020ex760120801010Sheets and billets of secondary aluminium alloy containing lithium0 %31.12.2017
ex76042910ex760612991020Sheets and bars of aluminium-lithium alloys0 %31.12.2015
ex76061292ex760711902020Aluminium and magnesium alloy strip:in rolls,of a thickness of 0,14 mm or more but not more than 0,40 mm,a width of 12,5 mm or more but not more than 359 mm,a tensile strength of 285 N/mm2 or more, andan elongation at break of 1 % or more, andcontaining by weight:93,3 % or more of aluminium,2,2 % or more but not more than 5 % of magnesium, andnot more than 1,8 % of other elements0 %31.12.2017
ex7607119030Laminated aluminium foil with:99 % or more of aluminium,a silica and water glass free hydrophilic coating,a total thickness of not more than 0,120 mm,a tensile strength of 100 N/mm2 or more (as determined by test method ASTM E8), andan elongation at break of 1 % or more0 %30.6.2013
ex7607209010Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries0 %31.12.2017
ex8102100010Molybdenum powder witha purity by weight of 99 % or more anda particle size of 1,0 μm or more, but not more than 5,0 μm0 %31.12.2017
ex8108903020Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 871410000 %31.12.2017
ex8108905030Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:exhaust systems for internal combustion engines ortubes and pipes of subheading 810890600 %31.12.2017
ex8108905040Titanium-alloy sheets for the manufacture of structural parts of aircrafts0 %31.12.2017
ex8108905050Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium0 %31.12.2017
ex8108905085Plates, sheets, strip and foil of non-alloyed titanium0 %31.12.2017
ex8113009010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %31.12.2017
ex8207301010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles0 %31.12.2017
ex84073300ex84079080ex84079090101010Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of heading 84331190,tractors of subheading 87019011, whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 orsnowploughs and snow blowers of subheading 8430200 %31.12.2017
ex84089043ex84089045ex840890473020304 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:a capacity of not more than 3850 cm3, anda rated output of 15 kW or more but not more than 55 kW,for use in the manufacture of vehicles of heading 84270 %31.12.2017
ex8411990030Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,with a heat-resistance of not more than 1100 °C;with a diameter of 30 mm or more, but not more than 80 mm;with a height of 30 mm or more, but not more than 50 mm0 %31.12.2017
ex8481806960Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valvea brass valve body including valve slider and copper connectionswith a working pressure up to 4,5 MPa0 %31.12.2017
ex8483303830Cylindrical bearing housing:of precision-cast grey cast iron complying with standard DIN EN 1561,with oil chambers,without bearings,with a diameter of 60 mm or more, but not more than 180 mm,with a height of 60 mm or more, but not more than 120 mm,whether or not with water chambers and connectors0 %31.12.2017
ex8501310070DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 100 mm,a supply voltage of 12 V,an output at 20 °C of 300 W or more, but not more than 550 W,a torque 20 °C of 2,90 Nm or more, but not more than 5,30 Nm,a rated speed at 20 °C of 600 rpm or more, but not more than 1200 rpm,equipped with the rotor angle position sensor of resolver type or Hall effect type,of the kind used in power steering systems for cars0 %31.12.2017
ex85013300ex85014080ex85015350305010Electric drive for motor vehicles, with an output of not more than 315 kW, with:an AC or DC motor whether or not with transmission,power electronics0 %31.12.2016
ex8501620030Fuel cell systemconsisting of at least phosphoric acid fuel cells,in a housing with integrated water management and gas treatment,for permanent, stationary energy supply0 %31.12.2017
ex8504318020Transformer for use in the manufacture of inverters in LCD modules0 %31.12.2017
ex8504318040Electrical transformers:with a capacity of 1 kVA or lesswithout plugs or cables,for internal use in the manufacture of set top boxes and TVs0 %31.12.2017
ex8504408240Printed circuit board equipped with a bridge rectifier circuit and other active and passive componentswith two output connectorswith two input connectors which are available and useable in parallelable to switch between bright and dimmed operation modewith an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, orwith an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, orwith an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation modewith an input current reaching 80 % of its nominal value within 20 mswith an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versionswith an maximum inrush current overshoot of not more than 250 % of the input currentwith a period of the inrush current overshoot of not more than 100 mswith an input current undershoot of not less than 50 % of the input currentwith a period of the inrush current undershoot of not more than 20 mswith a presettable output currentwith an output current reaching 90 % of its nominal pre-set value within 50 mswith an output current reaching zero within 30 ms after removal of the input voltagewith an defined failure status in case of no-load or too-high load (end-of-life function)0 %30.6.2013
ex8504408250Transformer in a housing witha rated power of not more than 30 Wan input voltage of 90 V or more, but not more than 305 Van input frequency of 47 Hz or more, but not more than 63 Hza constant current output of 350 mA or more, but not more than 1050 mAan inrush current of not more than 10 Aan operating temperature range of – 20 °C or more, but not more than + 65 °C,suitable for driving LEDs0 %31.12.2017
ex8504509550Solenoid coil witha power consumption of not more than 6 W,an insulation resistance of more than 100 M ohms, andan insert hole of 11,4 mm or more, but not more than 11,8 mm0 %31.12.2017
ex8505110033Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre0 %31.12.2013
ex8505110050Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,of a kind to be used in the manufacture of electric servomotors for industrial automation0 %31.12.2017
ex8505110060Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, witha diameter of not more than 45 mm,a height of not more than 45 mm,of a kind used in the manufacture of permanent magnets after magnetisation0 %31.12.2017
ex8507600040Batteries of ion-lithium electric accumulators rechargeable with:a length of 1203 mm or more, but not more than 1297 mm,a width of 282 mm or more, but not more than 772 mm,a height of 792 mm or more, but not more than 839 mm,a weight of 260 kg or more, but not more than 293 kg,power of 22 kWh or 26 kWh, andconstituted of 24 or 48 modules0 %31.12.2017
ex8507600050Modules for the assembly of batteries of ion lithium electric accumulators with:a length of 298 mm or more, but not more than 408 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 138 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg, anda power of 485 kWh or more, but not more than 2158 kWh0 %31.12.2017
ex8507600055Lithium-ion accumulator in cylindrical form, with:a base similar to an ellipse squeezed in the middle,a length of 49 mm or more (not including terminals),a width of 33,5 mm or more,a thickness of 9,9 mm or more,a rated capacity of 1,75 Ah or more, anda rated voltage of 3,7 V,for the manufacture of rechargeable batteries0 %31.12.2017
ex8507600057Lithium-ion accumulator, cuboid in shape, with:some of the corners rounded off,a length of 76 mm or more (not including terminals),a width of 54,5 mm or more,a thickness of 5,2 mm or more,a rated capacity of 3100 mAh or more, anda rated voltage of 3,7 V,for the manufacture of rechargeable batteries0 %31.12.2017
ex8507908070Cut plate of nickel-plated copper foil, with:a width of 70 mm (± 5 mm),a thickness of 0,4 mm (± 0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric vehicle batteries0 %31.12.2016
ex8518299530Loudspeakers of:an impedance of 4 Ohm or more, but not more than 16 Ohm,a nominal power of 2 W or more, but not more than 20 W,with or without plastic bracket, andwith or without electric cable fitted with connectors,of a kind used for TV sets and video monitors manufacture0 %31.12.2017
ex8522908096Hard disk drive, for incorporation in products of heading 85210 %31.12.2017
ex8528594020Liquid crystal display colour video monitor having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less,either without housing, with back cover and mounting frame,or with a housing specially designed for mounting,suitable for the incorporation into goods of Chapters 84 to 90 and 940 %31.12.2013
ex8529906575Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels0 %31.12.2017
ex8529909247Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel0 %31.12.2014
ex8529909250Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with backlight, micro-controller,with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,for use in the manufacture of vehicles of chapter 870 %31.12.2015
ex8536699081Pitch connector for use in the manufacture of LCD television reception apparatus0 %31.12.2017
ex8536699087D-subminiature (D-sub) type connectors, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 and 85280 %31.12.2016
ex8536699088Secure Digital (SD), CompactFlash, "Smart Card" and 64- pin PC-card female connectors, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1000 V0 %31.12.2017
ex8537109130Data processing and evaluation vehicle dashboard control module, operating through the CAN — bus protocol, containing at least:microprocessor relays,a stepper motor,Electrically Erasable Programmable Read-Only (EEPROM) memory, andother passive components (such as connectors, diodes, voltage stabiliser, resistors, capacitors, transistors),with a voltage of 13,5 V0 %31.12.2017
ex8543900040Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back0 %31.12.2017
ex85442000ex85444290ex85444993ex8544499510202010PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),a distance between conductors of not more than 0,5 mm anda pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm0 %31.12.2013
ex8544429010Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (± 0,25 V)connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,outer screening shielding,used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits0 %31.12.2013
ex8548909050Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 85280 %31.12.2017
ex8704239120Motor chassis with a self-ignition capacity of at least 8000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm0 %31.12.2017
ex9001200010Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film0 %31.12.2017
ex9001900075Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules0 %31.12.2017
ex9002110020Lensesmeasuring not more than 80 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 18 times,of a kind used for the production of visualisers or live image cameras0 %31.12.2017
ex9002110030Lensesmeasuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,with a resolution of 130 lines/mm or better, andwith a zoom ratio of 18 timesof a kind used for the production of visualisers or live image cameras0 %31.12.2017
ex9002110040Lensesmeasuring not more than 125 mm × 65 mm × 65 mm,with a resolution of 125 lines/mm or better, andwith a zoom ratio of 16 timesof a kind used for the production of visualisers or live image cameras0 %31.12.2017
ex9002110070Lensesmeasuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,with an etendue of 7 steradian mm2 or better, andwith a zoom ratio of 16 timesof a kind used for the production of visualisers or live image cameras0 %31.12.2017
ex9032890040Digital valve controller for controlling liquids and gases0 %31.12.2017
ex9405403930Electric light assembly containing:printed circuit boards andLight Emitting Diodes (LED)for the manufacture of backlight units for flat TV sets0 %30.6.2013
ANNEX II
CN codeTARIC
ex2008601930
ex2008603930
ex2008939120
ex2009493091
ex2710122510
ex2805309030
ex2823000010
ex2835100010
ex2839190010
ex2841800010
ex2841908510
ex2850002030
ex2904100040
ex2914199020
ex2914199030
ex2914199040
ex2914390030
ex2914390040
ex2914500060
ex2914500070
ex2916399055
ex2917399540
ex2918230010
ex2920190010
ex2921309920
ex2921309930
ex2921599030
ex2922498560
ex2924299835
ex2924299886
ex2928009075
ex2928009080
ex2928009085
ex2930200010
ex2930909966
ex2930909967
ex2930909968
ex2930909969
ex2930909971
ex2930909982
ex2930909983
ex2932990060
ex2933199040
ex2933299040
ex2933399955
ex2933698035
ex2933698055
ex2933790030
ex2933998050
ex2933998073
ex2933998089
ex2934208040
ex2934999015
ex2934999023
ex2934999074
ex2934999078
ex2934999083
ex2934999084
ex3204150010
ex3204170030
ex3204170075
ex3208901975
ex3208909110
ex3402130020
ex3808919010
ex3808919050
ex3808929010
ex3808931510
ex3808932720
ex3815199041
ex3815909016
ex3815909085
ex3815909089
ex3824909733
ex3824909736
ex3824909737
ex3824909738
ex3824909744
ex3824909747
ex3824909770
ex3824909778
ex3901101010
ex3901209030
ex3903909035
ex3903909086
ex3906100010
ex3907999060
ex3909400020
ex3910000050
ex3911901930
ex3919108045
ex3919108055
ex3919900025
ex3919900026
ex3919900028
ex3919900045
ex3919900047
ex3919900053
ex3919900055
ex3920202994
ex3920510010
ex3920510040
ex3920621941
ex3920621943
ex3920621980
ex3920621982
ex3920799010
ex3920920030
ex5407100010
ex5603111020
ex5603119020
ex5603129050
ex5603129070
ex5603139070
ex5603929040
ex5603929070
ex5603929080
ex5603939010
ex5603939050
ex5603949040
ex7005102510
ex7005103010
ex7006009060
ex7007192020
ex7326909840
ex7410220010
ex7601209910
ex7604291010
ex7606129220
ex7606129920
ex7607119020
ex7607119030
ex7607209010
ex8108903020
ex8108905030
ex8108905040
ex8108905050
ex8113009010
ex8407310010
ex8407330010
ex8407908010
ex8407909010
ex8412218050
ex8419899830
ex8419899840
ex8462218010
ex8477598010
ex8501330030
ex8501408050
ex8501535010
ex8504318020
ex8504408240
ex8505110033
ex8507908070
ex8522908096
ex8528594020
ex8529904910
ex8529906575
ex8529906580
ex8529909246
ex8529909247
ex8529909250
ex8529909260
ex8536699081
ex8536699087
ex8540910095
ex8543900040
ex8544429010
ex8544499320
ex8704239120
ex9001200010
ex9001200040
ex9001900075
ex9032108920
ex9032890040
ex9405403930