Commission Regulation (EU) No 833/2012 of 17 September 2012 imposing a provisional anti-dumping duty on imports of certain aluminium foils in rolls originating in the People’s Republic of China

Commission Regulation (EU) No 833/2012of 17 September 2012imposing a provisional anti-dumping duty on imports of certain aluminium foils in rolls originating in the People’s Republic of China THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Council Regulation (EC) No 1225/2009 of 30 November 2009 on protection against dumped imports from countries not members of the European CommunityOJ L 343, 22.12.2009, p. 51. ("the basic Regulation"), and in particular Article 7 thereof,After consulting the Advisory Committee,Whereas:A.PROCEDURE1.Initiation(1)On 20 December 2011, the European Commission (the "Commission") announced, by a notice published in the Official Journal of the European UnionOJ C 371, 20.12.2011, p. 4. ("Notice of Initiation"), the initiation of an anti-dumping proceeding with regard to imports into the Union of certain aluminium foil in rolls originating in the People’s Republic of China ("PRC").(2)The proceeding was initiated following a complaint lodged on 9 November 2011 by the European Association of Metals (Eurométaux) ("the complainant") on behalf of producers representing more than 50 %, of the total Union production of certain aluminium foil in rolls. The complaint contained prima facie evidence of dumping of the said product and of material injury resulting therefrom, which was considered sufficient to justify the initiation of an investigation.2.Parties Concerned by the Proceeding(3)The Commission officially advised the complainant, other known Union producers, the exporting producers in the PRC, producers in the analogue country, importers, distributors, and other parties known to be concerned, and representatives of the PRC of the initiation of the proceeding. Interested parties were given an opportunity to make their views known in writing and to request a hearing within the time limit set in the Notice of Initiation.(4)The complainant, other Union producers, the exporting producers in the PRC, importers and distributors made their views known. All interested parties, who so requested and showed that there were particular reasons why they should be heard, were granted a hearing.(5)In view of the apparent high number of Union producers, importers and exporting producers sampling was envisaged in the Notice of Initiation, in accordance with Article 17 of the basic Regulation.(6)In order to enable the Commission to decide whether sampling would be necessary and if so, to select a sample, importers and exporting producers were asked to make themselves known to the Commission and to provide, as specified in the Notice of Initiation, basic information on their activities related to the product concerned (as defined in section 3 below) during the period from 1 October 2010 to 30 September 2011.(7)As regards the Union producers, in the Notice of Initiation the Commission announced that it had provisionally selected a sample of Union producers on the basis of the information received from the cooperating Union producers prior to the initiation of the investigation. That sample consisted of the four largest known companies or groups of companies in the Union.(8)As explained in recital (24) below, only two unrelated importers provided the requested information and agreed to be included in the sample. Therefore, in view of the limited number of cooperating importers, sampling was deemed to be no longer necessary. A third importing company provided a submission without submitting a questionnaire response.(9)As explained in recital (26) below, 14 exporting producers in the PRC provided the requested information and agreed to be included in the sample. On the basis of the information received from these parties, the Commission selected a sample of four exporting producers having the largest volume of exports to the Union.(10)In order to allow exporting producers to submit a claim for market economy treatment ("MET") or individual treatment ("IT"), if they so wished, the Commission sent claim forms to all Chinese exporting producers known to be concerned and to the authorities of the PRC. Two companies came forward and requested MET, one company was part of the selected sample, the other not. Requests for IT were received from the companies in the sample and the company that requested MET but was not part of the sample.(11)The Commission sent questionnaires to all exporting producers that made themselves known within the deadlines set out in the Notice of Initiation, namely the four sampled companies and all other companies in order to allow them to request individual examination. Questionnaires were also sent to other parties known to be concerned, namely the four sampled Union producers, the cooperating importers in the Union, users and an association of consumers.(12)Replies were received from three sampled exporting producers in the PRC, from the four sampled Union producers and two unrelated importers. Also six retailers replied to the user's questionnaire.(13)The Commission has not received any claims for individual examination in accordance with Article 17(3) of the basic Regulation.(14)The Commission sought and verified all the information deemed necessary for a provisional determination of dumping, resulting injury and Union interest. Verification visits were carried out at the premises of the following companies:Producers in the UnionCUKI Cofresco SPA, Volpiano (TO), Italy;Fora Folienfabrik GmbH, Radolfzell, Germany;ITS BV, Apeldoorn, The Netherlands;SPHERE Group, Paris, France.Exporting producers in the PRCCeDo (Shanghai) Ltd, Shanghai;Ningbo Favored Commodity Co., Ltd, Ningbo;Ningbo Times Aluminium Foil Technology Co., Ltd, Ningbo;Shanghai Blue Diamond Aluminium Foil Manufacturing Co., Ltd, Shanghai.Related importer in the UnionCeDo Limited, Telford, UKProducer in Turkey (analogue country)Sedat Tahir Ltd., Ankara(15)In order to collect information concerning the cost of the major indirect raw material in the production of aluminium foil, i.e. primary aluminium, information from the Shanghai Futures Exchange ("SHFE" or "Exchange"), the main trading patform for aluminium in China was sought. Information about world markets and prices was requested from the London Metal Exchange ("LME"), to which also an information visit was paid. The SHFE provided some written information following the request of the Commission. The Commission also proposed an information visit to SHFE which initially was accepted. However at a later stage, the SHFE considered that an approval from the Chinese government would be required for such a visit. The Chinese authorities on the other hand denied that such an approval would be necessary. Eventually the SHFE reversed its initial acceptance and decided not to accept the visit.(16)An information visit was paid to Shanghai Metals Markets ("SMM"), a price information provider and publisher in Shanghai.3.Investigation Period(17)The investigation of dumping and injury covered the period from 1 October 2010 to 30 September 2011 (the "investigation period" or the "IP"). The examination of trends relevant for the assessment of injury covered the period from January 2008 to the end of the IP ("period considered").B.PRODUCT CONCERNED AND LIKE PRODUCT1.Product Concerned(18)The product concerned is aluminium foil of a thickness of 0,007 mm or more but less than 0,021 mm, not backed, not further worked than rolled but whether or not embossed, in low weight rolls of a weight not exceeding 10 kg ("the product concerned" or "aluminium foil in rolls" or "AHF"). The product concerned currently falls within CN codes ex76071111 and ex76071910.(19)The product concerned is generally used as a consumer product for packaging and other household/catering application. The product definition was not contested.2.Like Product(20)The investigation has shown that aluminium foil in rolls produced in and exported from the PRC, aluminium foil in rolls produced and sold in the Union by the Union producers and aluminium foil in rolls produced and sold in Turkey (the analogue country) by the cooperating Turkish producer have the same basic physical and technical characteristics as well as the same basic uses and are therefore considered to be alike within the meaning of Article 1(4) of the basic Regulation.C.SAMPLING1.Sampling of Union Producers(21)In view of the apparent large number of Union producers, sampling for the determination of injury was provided for in the notice of initiation, in accordance with Article 17 of the basic Regulation.(22)In the Notice of Initiation the Commission announced that it had provisionally selected a sample of Union producers. This sample consisted of the four largest (groups of) companies, out of more than 30 Union producers that were known to produce the like product prior to the initiation of the investigation. The selection of the sample was done on the basis of the producers' sales volume, their size and geographic location in the Union and the proposed sample represented 44 % of the total estimated Union production during the IP. Interested parties were invited to consult the file for inspection by interested parties and to comment on the appropriateness of this choice within 15 days of the date of publication of the notice of initiation. After the deadline for comments, one interested party argued that the sample should have included a producer from the United Kingdom. In this respect, it is noted that a UK producer company (part of the Sphere Group) was indeed in the sample. No other interested party opposed the final sample and the sample was, consequently, confirmed.2.Sampling of Unrelated Importers(23)In view of the potentially large number of importers involved in the proceeding, sampling of importers was provided for in the Notice of Initiation in accordance with Article 17 of the basic Regulation.(24)Only two unrelated importers provided the requested information and agreed to cooperate. Consequently, sampling was no longer deemed to be necessary.3.Sampling of Exporting Producers(25)In view of the apparent large number of exporting producers, sampling for the determination of dumping was provided for in the Notice of Initiation, in accordance with Article 17 of the basic Regulation.(26)A total of 14 exporting producers in the PRC provided the requested information and agreed to be included in a sample. These companies exported around 7.800 tonnes, i.e. around 60 % of the Chinese exports to the EU market in the IP. On the basis of the information received from these parties, the Commission selected a sample of four exporting producers having the largest representative volume of production, sales and exports which could reasonably be investigated within the time available. One of the sampled companies subsequently withdrew its cooperation and another notified the Commission that the information it has provided to the Commission in its sampling form was erroneous. Based on this new information it was decided to exclude this company from the sample of companies. The Commission invited two further companies to be in the sample. The cooperating exporting producers, the Mission of the PRC to the EU and the complainant were consulted about the final composition of the sample. No interested party opposed this selection. Subsequently one of the newly sampled companies also withdrew its cooperation. The final sample thus included three exporting producers in the PRC covering around 30 % of the imports of the product concerned to the Union during the IP and representing 50 % of the sales volume of the 14 exporting producers which provided data for the sampling exercise.D.DUMPING1.Market Economy Treatment and Individual Treatment1.1.Market Economy Treatment (MET)(27)Pursuant to Article 2(7)(b) of the basic Regulation, in anti-dumping investigations concerning imports originating in the PRC, normal value shall be determined in accordance with paragraphs 1 to 6 of the said Article for those exporting producers which were found to meet the criteria laid down in Article 2(7)(c) of the basic Regulation.(28)Two companies, CeDo Shanghai Co. Ltd.("CeDo Shanghai") and Shanghai Blue Diamond Co. Ltd. ("Blue Diamond"), came forward and requested MET. Only CeDo Shanghai was selected to be part of the sample as explained above; the other company was not. However, following the judgement by the Court of Justice in Case C-249/10 Ρ Brosmann Footwear (HK) and Others v Council of the European Union, it was decided to examine all MET claim forms received within the deadline – i.e. the claims by the two above mentioned companies.(29)The claims for MET were analysed against the five criteria laid down in Article 2(7)(c) of the basic Regulation. Briefly, and for ease of reference only, the MET criteria are set out in summarised form below:business decisions are made in response to market signals, without significant State interference, and costs reflect market values,firms have one clear set of basic accounting records, which are independently audited in line with international accounting standards and are applied for all purposes,there are no significant distortions carried over from the former non-market economy system,bankruptcy and property laws guarantee stability and legal certainty, andexchange rate conversions are carried out at market rates.(30)On-the-spot investigations regarding MET claims were carried out at the premises of these companies.(31)For both companies, MET was denied under Criterion 1 of Article 2(7)(c) based on evidence that the price of the upstream basic raw material, aluminium, was distorted. These distortions were also found in the price of the intermediate raw material, aluminium foil in jumbo rolls as described below. The companies also failed to meet other criteria as explained below.1.1.1.Industry-wide conclusions concerning Criterion 1- Business decisions and costs of major inputs(32)Aluminium foil in small rolls is produced through a simple process of rewinding, cutting and packaging of aluminium foil on jumbo rolls onto smaller rolls. The main raw material for the production of aluminium foil is primary aluminium. Primary aluminium accounts for ca. 60-70 % of the costs of production of the product concerned by this investigation and it is thus the main cost-driver in its production. This is reflected in the industry-wide practice of quoting both purchasing and sales prices for aluminium foil on the basis of a reference price for primary aluminium (aluminium ingot) plus a production / conversion fee. Indeed, the companies requesting MET purchased aluminium foil on jumbo rolls on the basis of purchase contracts that set the price of aluminium foil on jumbo rolls with reference to primary aluminium prices published in the SMM, a price information provider on different metals, which quotes these prices on the basis of spot traded prices in the Shanghai area. The SMM publication is highly representative of domestic aluminium prices. These prices follow very closely prices quoted on the SHFE where most transactions take place in China.(33)The world-wide reference for the price of primary aluminium, which is a commodity, is the quotation at the LME. The price of aluminium on the domestic Chinese market diverges significantly from LME prices. As shown in the following graph, the LME v. SHFE price difference in the IP ranged from + 500 to – 90 USD/tonne. During the investigation period, the price quotation at the LME has been, on a monthly average basis more than 9 % higher than in the SHFE (net price), the difference reaching as high as + 23 % in the middle of the period. It is also noteworthy that during the latter part of the IP when globally prices were decreasing due to a market contraction in demand, the opposite trend could be observed in the SHFE prices, (resulting even in prices 3 % above LME prices) which further illustrates the price distortions prevalent in this market.(34)This substantial price divergence of primary aluminium compared to the rest of the world, as explained above, is considered to be due to a combination of a series of State-driven factors and significant interference by the State in the domestic market with a number of tools. This State influence resulted in the creation and existence of a rather isolated domestic market for primary aluminium in China insulated from market forces.(35)First of all, the SHFE is controlled by the China Securities Regulatory Commission ("CSRC"). SHFE performs its functions in accordance with the Regulation on the Administration of Futures Trading, the Measures for the Administration of Futures Exchanges and its AoA. Several of these state-imposed rules governing the functioning of the Exchange contribute to low volatility, distorted prices and price trends at the SHFE: daily price fluctuations are limited to 4 % above or below the settlement price of the previous trading day, trading happens at a low frequency (until the 15th day of each month), futures contracts are limited to a duration of up to 12 months, open interests by traders are limited to a certain amount, price speculation is restricted.(36)Access to the Exchange is limited by law only to Chinese traders which also need an approval from CSRC to trade on the Exchange. Market representatives of SHFE members can only perform transactions at the request of SHFE members, cannot accept orders from other organizations and cannot trade on their own account. Physical deliveries can only take place in an approved warehouse within the PRC, unlike international exchanges, where delivery can take place worldwide. Moreover, as they are a platform for physical exchanges only (no derivatives are sold) this completely insulates the Chinese aluminium markets. As a consequence, arbitrage with the LME or other markets is practically not possible and the Exchange works in isolation from world markets. Thus an equalization among these markets cannot take place.(37)Second, the State interferes in the price setting mechanism in the SHFE given its position both as a seller of primary aluminium and as a purchaser via the State Reserve Bureau and other State Bodies. For example, the Chinese Government enacted a stimulus package aiming at limiting the effects of the economic crisis at the end of 2008 and this package included a scheme for the State Reserves Bureau to buy aluminium from smelters in order to support their operations by artificially increasing domestic demand as the global financial / economic crisis reduced global demand. Those State arranged purchases distorted the prices significantly during the first half of 2009. It is interesting to note in this respect that at the end of the investigation period prices on the Chinese domestic market moved in an opposite direction to prices on world markets.(38)The Chinese State described its policy of interference in the aluminium sector in its 12th 5-Year Development Plan for Aluminium (2011-15). The plan states "adjusting tax and export tax rebates and other economic levers, and strictly control the total amount of expansion and exports of primary products". In practice this means that a combination of specific tax schemes is geared to promote the aluminium industry. These tools discourage the exports of primary aluminium from the PRC whilst encouraging the imports and the manufacture of downstream products (such as the product concerned) incorporating aluminium for both the domestic and export markets.(39)This plan continues the policy which has existed for many years in previous Plans. Furthermore these plans have been implemented over many years and during the IP several implementing measures were in operation and are described below. These schemes are:1)an export duty of 17 % on primary aluminium and aluminium scrap (compared with a 0 % duty on aluminium foil in small rolls);2)a VAT rebate of 0 % on primary aluminium (compared with the 15 % rebate on aluminium foil since June 2009);3)elimination of the 5 % import duty on metal.(40)Thus the combination of these measures is used by the State to restrict exports of primary aluminium, which in turn results in an increased domestic supply and leads to a reduction of its price on the domestic market.(41)The large majority of the Chinese aluminium smelters are state-owned. The various industrial plans that clearly influence aluminium production capacity and output, currently in particular the 12th 5 -year plan (2011-2015) for the Aluminium Industry encourages the strategic development of "aluminium deep processing products and to promote aluminium fabrication industry to further extend industrial chain".(42)The measures taken by the Chinese State as described above were consequently considered as evidence of underlying State interference in decisions of firms regarding acquisition of raw materials and their production costs. Indeed, the current Chinese system of high export duties and lack of VAT reimbursement for export of primary aluminium, combined with no export taxes and partial VAT reimbursement on exports of the downstream aluminium products such as the product concerned, and State interference in the setting of prices in the SHFE, has essentially lead to a situation where Chinese primary aluminium prices and the prices of downstream aluminium products (also used as raw material in the production of other aluminium products) are the result of State intervention independent from price fluctuations on international markets. This has a direct influence on company decisions when acquiring downstream aluminium raw materials. Prices of aluminium have always been distorted and, except for a very limited period of time when as mentioned above other State distortive priorities appear to have been in play, this has provided an unfair advantage to Chinese producers of aluminium foil.(43)Bearing in mind that primary aluminium accounts for ca. 60 % of cost of production of aluminium foil in small rolls this difference is translated into an unfair significant cost advantage for Chinese producers, which for a commodity type product like aluminium foil in small rolls is decisive.(44)CeDo Shanghai disputed the findings of the Commission after they were disclosed to them. First, it claimed that some of the Commission's findings are erroneous and inconsistent which negatively affects the overall finding concerning business decisions of firms in the PRC. Specifically it stated that access to the SHFE is not limited to Chinese nationals as it is possible to open accounts with brokers who have the authorization to trade on the SHFE. Overall, the company did not dispute the fact that controlled actions on the side of Chinese State exist, but in its view the purpose of these actions is not to distort prices and secure a low volatility on the market, but rather to prevent speculation and potential mistakes while carrying out transactions. Secondly, the company claimed that there were rather limited price variations and gaps between the SHFE and LME in the IP, including a period where prices in the PRC were even higher than elsewhere. Consequently the cost advantage of the Chinese producers that would exist through depressed prices is minimal, if existing at all. It further explains the reversing price trends at the end of the IP were due to the fact that the Chinese economy was still expanding at the end of 2011 and were not the result of distortions induced by the State. Finally it claimed that the above-mentioned mechanisms or procedures do not have material impact on the company’s decisions with respect to its costs and pricing policies.(45)The company's statements do not contradict the Commission's finding that only Chinese traders are allowed to trade on this Exchange. As to the purpose and objective of the State's actions the company's statements are speculative and no evidence has been provided at this stage. Further, it is irrelevant why these regulations and limitations were put in place What is at issue is their overall effect of creating an isolated domestic market for aluminium where price trends do not follow price trends on world markets. In this respect it is also noted that upon disclosure, the Chinese authorities did not comment on this point. As concluded above in recital (43), the distortion on the Chinese aluminium market (minus 9 % price difference in the IP) is significant enough to result in an unfair significant cost advantage to Chinese producers of a commodity type of product such as the product concerned. This cost advantage cannot be explained by any comparative advantage of the Chinese aluminium producers. Finally, all cooperating companies purchased their raw material on the Chinese domestic market on the basis of contracts that are indexed to local aluminium price indices. Thus individual companies' decisions are clearly influenced by the State's actions creating a distorted market for aluminium.(46)Blue Diamond explained that SMM prices are not State-ruled prices and SMM is similar to LME as they are public information sources. The Commission did not find that prices were directly set by the State thus this comment is irrelevant. Secondly, the fact that prices are publicly available does not ensure automatically that they are the result of market forces.1.1.2.Company-specific conclusions concerning Criterion 2 to 5(47)The Commission found that CeDo Shanghai did not fulfil Criterion 3 as its repayment of a loan in foreign currency was subject to the approval of the Foreign Exchange Administration which is considered to have a distortive effect on decisions of the company on borrowing and thus its financial situation.(48)CeDo Shanghai disputed the Commission's findings concerning Criterion 3. It claimed that the registration with the Foreign Exchange Administration is a country-wide practice which applies to any company which repays borrowings from abroad and it is merely good governance by the Chinese financial authorities to ensure that improper transactions are not used to channel finances out of China. The company further claimed that neither its production costs nor its overall financial situation in any way depend on this approval. Thus CeDo claimed that the Commission's definition of Criterion 3 in this regards is deficient.(49)Financing decisions clearly are one of the most important decisions for firms. The Regulation of external debt provided by CeDO clearly puts in place an approval procedure for borrowings originating from outside of China. Thus decisions of firms to take financing from abroad are subject to approval of the State which creates a distortion in their financial situation. The company’s claims thus were rejected.(50)Blue Diamond did not meet Criterion 1 for the further reason that it benefits from an extended income tax exemption. It also failed Criterion 2 as it does not have one clear set of basic accounting records audited in line with international accounting standards and which would be applied for all purposes. Finally the company could not demonstrate that it meets Criterion 3 as it uses industrial premises for free, which distorts its costs and financial situation.(51)The company disputed some of these findings. It claimed that the tax exemption has no effect on its export prices, the latter being the focus of anti-dumping investigations. It also claimed that it has followed Chinese VAT-rules in its accounting and explained that differing sales and accounting records were the result of contractual conditions and were not a regular practice followed by the company. The company further confirmed that it uses a considerable industrial area for free on the basis of an agreement.(52)The comments concerning double invoicing contradicted the explanation and evidence provided during the on-spot investigation. No further evidence was provided concerning double invoicing and how the company's depreciation practice was in line with Chinese VAT rules as claimed by the company. Finally, the company confirmed the findings concerning tax exemptions and free use of industrial estate. It is noted in this regard that the Criteria used for the assessment of MET claims are not all strictly export price-relevant criteria but they are there to determine whether market economy conditions prevail for the producer in respect of the manufacture and sale of the like product concerned. Furthermore, since the company neither claimed individual examination, nor was it selected to be part of the sample, no information about its export prices was requested.(53)MET is therefore denied to both companies.1.2.Individual Treatment (IT)(54)Pursuant to Article 2(7)(a) of the basic Regulation, a country-wide duty, if any, is established for countries falling under that Article, except in those cases where companies are able to demonstrate that they meet all criteria set out in Article 9(5) of the basic Regulation. Briefly, and for ease of reference only, these criteria are set out below:In the case of wholly or partly foreign owned firms or joint ventures, exporters are free to repatriate capital and profits;Export prices and quantities, and conditions and terms of sale are freely determined;The majority of the shares belong to private persons. State officials appearing on the Boards of Directors or holding key management positions shall either be in minority or it must be demonstrated that the company is nonetheless sufficiently independent from State interference;Exchange rate conversions are carried out at the market rate; andState interference is not such as to permit circumvention of measures if individual exporters are given different rates of duty.(55)All sampled companies and Blue Diamond requested IT. These claims were examined. The investigation showed that all the sampled companies and Blue Diamond fulfilled all the conditions of Article 9(5) of the basic Regulation.(56)Thus all sampled exporting producers and Blue Diamond were granted IT.2.Analogue Country(57)According to Article 2(7)(a) of the basic Regulation, normal value for exporting producers not granted MET shall be established on the basis of the domestic prices or constructed normal value in an analogue country.(58)In the notice of initiation, the Commission indicated its intention to use the United States of America as an appropriate analogue country for the purpose of establishing normal value for the PRC and invited interested parties to comment on this.(59)No substantive comments were received concerning the United States of America ("USA") as a proposed analogue country. None of the interested parties suggested alternative analogue country producers of the like product.(60)However there was no co-operation from the producers in the USA although all known producers in the USA were contacted during the investigation. The Commission requested that from producers in other third countries which were mentioned in the complaint such as Mexico and South Africa cooperate, however was no cooperation from these countries either.(61)The Commission through its own research tried to identify any additional producers in third countries. Letters and questionnaires were therefore sent to all known producers in other third countries (Turkey, India, South Korea).(62)Two Turkish producers came forward showing willingness to cooperate. Ultimately one producer provided a full questionnaire reply and accepted a verification visit at its premises.(63)The Commission placed its assessment concerning the appropriateness of Turkey as an analogue country in the non-confidential file for inspection by interested parties. None of the interested parties made comments on the selection of Turkey as the analogue country in the present case.(64)It is therefore provisionally concluded that Turkey constitutes an appropriate analogue country in accordance with Article 2(7)(a) of the basic Regulation.3.Normal Value(65)As none of the companies requesting MET could demonstrate that they fulfil the MET criteria and the other two companies that were selected to be part of the sample did not request MET, the normal value for all Chinese exporting producers was determined, as explained in recital (57) above, on the basis of the prices actually paid or payable or a constructed normal value in Turkey for the like product. Following the choice of the prices paid or payable in the Union, normal value was calculated on the basis of the data verified at the premises of the cooperating Turkish producer listed in recital (14) above.(66)In accordance with Article 2(2) of the basic Regulation, the Commission first examined whether the sales of the like product to independent customers were representative. The sales of the Turkish cooperating producer of the like product were found to be representative compared to the product concerned exported to the Union by the exporting producers included in the sample.(67)The Commission subsequently examined whether these sales could be considered as having been made in the ordinary course of trade pursuant to Article 2(4) of the basic Regulation. This was done by establishing the proportion of profitable sales to independent customers. The sales transactions were considered profitable where the unit price was equal to or above the cost of production. Cost of production on the Turkish market during the IP was therefore determined.(68)For those product types where more than 80 % by volume of sales on the domestic market of the product type were above cost and the weighted average sales price of that type was equal to or above the unit cost of production, normal value, by product type, was calculated as the weighted average of the actual domestic prices of all sales of the type in question, irrespective of whether those sales were profitable or not.(69)Where the volume of profitable sales of a product type represented 80 % or less of the total sales volume of that type, or where the weighted average price of that type was below the unit cost of production, normal value was based on the actual domestic price, which was calculated as a weighted average price of only the profitable domestic sales of that type made during the IP.(70)Wherever there were no domestic sales of a particular product type by the cooperating Turkish producer, the normal value was constructed in accordance with Article 2(3) of the basic Regulation.(71)For product types that were not sold on the domestic market by the Turkish cooperating producer but these product types were sold on other markets, a normal value was constructed by adding to the cost of manufacturing of the same product type sold on other markets its SG&A and profit. In case of product types that were not sold by the Turkish cooperating producer at all, a normal value was constructed by adding to the cost of manufacturing of all product types their SG&A and profit.(72)Pursuant to Article 2(6) of the basic Regulation, the amounts for SG&A and profit were established on the basis of the actual data pertaining to production and sales in the ordinary course of trade of the like product by the Turkish producer.4.Export Prices(73)The exporting producers made export sales to the Union either directly to independent customers or through related companies located in the Union.(74)Where export sales to the Union were made directly to independent customers in the Union, export prices were established on the basis of the prices actually paid or payable for the product concerned in accordance with Article 2(8) of the basic Regulation.(75)Where export sales to the Union were made through related companies located in the Union, export prices were established on the basis of the first resale prices of these related companies to independent customers in the Union, pursuant to Article 2(9) of the basic Regulation. Adjustments were made for all costs incurred between importation and resale including sales, general and administrative expenses and profit. With respect to profit margin, the profit realised by two unrelated importers of the product concerned was used since the actual profit of the related importer was not considered reliable because of the relationship between the exporting producer and the related importer.5.Comparison(76)As Chinese imports were of private label business, comparisons were made only on the basis of sales of private label products by the Turkish cooperating company.(77)The comparison between normal value and export price was made on an ex-works basis. For the purpose of ensuring a fair comparison between the normal value and the export price, due allowance in the form of adjustments was made for differences affecting prices and price comparability in accordance with Article 2(10) of the basic Regulation. Appropriate adjustments for indirect taxes, freight, insurance, handling, warranty and credit costs were granted in all cases where they were found to be reasonable, accurate and supported by verified evidence. The weight of packaging was disregarded in the comparison.(78)Using the PCN-system to classify product types, there was a low degree of matching for all sampled exporting producer. Where no direct matches could be identified, similar types were compared and adjustments were made for differences, such as the packaging types. Where the resembling technique was employed the details were disclosed to the party involved.6.Dumping Margins(79)According to Article 2(11) and (12) of the basic Regulation, the dumping margin for the sampled exporting producers was established based on the comparison of the weighted average normal value with the weighted average export price expressed as a percentage of the CIF Union frontier price, duty unpaid.(80)A weighted average of these three dumping margins was calculated for the non-sampled co-operating companies.(81)Given the low degree of co-operation from the PRC (around 60 %), it is considered appropriate that the countrywide dumping margin applicable to all other exporting producers in the PRC should be based on the most dumped transactions of the cooperating exporters.(82)The provisional dumping margins thus established, expressed as a percentage of the CIF Union frontier price, duty unpaid, are as follows:

Table 1Dumping margins

Company Name	Status	Dumping margin
CeDo (Shanghai) Ltd	IT	39,3 %
Ningbo Times Aluminium Foil Technology Co., Ltd	IT	31,4 %
Ningbo Favored Commodity Co., Ltd	IT	28,6 %
Other co-operating companies		35,2 %
Countrywide dumping margin		43,4 %

E.INJURY1.Union Production and Union Industry(83)In the Union, there are 31 producers or groups of producers of the like product, most of them relatively small. They will hereafter be referred to as "Union industry" within the meaning of Articles 4(1) and 5(4) of the basic Regulation. The complainant, Eurométaux, acted on behalf of seven producers whose collective output, during the IP, amounted to ca. 50 % of the total Union production of certain aluminium foil in rolls. However, it should be noted that the data submitted by the complainant, as checked with other available sources, covered all known companies producing and selling the product concerned on the Union market. On that basis, the total Union production of the like product was estimated to amount to 91000 tonnes in the IP. Given that, through the complainant, information was collected or available from all known companies producing and selling the product concerned on the Union market, such information will be used as macroeconomic indicators in this investigation.2.Union Consumption(84)Union consumption was established on the basis of the sales volume on the Union market by the Union industry plus imports to the Union market. This data was supplied by the complainant and was made available to all interested parties. The data supplied for Union producers was crosschecked to the data received by the Commission during the standing and sampling exercises. Import data for the product concerned for both the country concerned and third countries was crosschecked to the COMEXT data available on Eurostat. The complainant pointed out that its figures for sales on the Union market contained certain volumes produced in the PRC already included in the import figures. A deduction was therefore made to the sales volume of certain non-sampled producers in the EU which also imported from the PRC. This deduction prevented double counting of these sales volumes in the total consumption.(85)On this basis the Union consumption was found to have developed as follows:

Table 1Consumption in the EU (tonnes)

	2008	2009	2010	IP
Total import	4600	7600	10300	14300
Union production sold on the Union market	91000	91500	87700	82456
Total consumption	95600	99100	98000	96756
Index (2008 = 100)	100	104	103	101

(86)Total consumption on the EU market only fluctuated slightly over the period considered. The reason for this stability is that the EU market for the product concerned is mature and, being a product generally used for household purposes, it was not subject to fluctuation despite the economic crisis.3.Imports from the Country Concerned3.1.Volumes and market share(87)Import volumes were obtained from the complainant who adjusted the Eurostat statistical data on the basis of its market knowledge. This adjustment was necessary because the CN code statistics contain imports which are not the product concerned. The adjustment was based on knowledge of exports to the EU market from the various exporting countries and the import price which would indicate whether the import was the product concerned or not. The detailed figures and methodology were made available to interested parties at Annex 3 of the complaint. On that basis, imports into the Union from the PRC developed as follows during the period considered:

Table 2Imports from the PRCSource: Complainant

	2008	2009	2010	IP
Imports from the PRC (tonnes)	4270	6836	9839	12994
Index (2008 = 100)	100	160	230	304
Market share	4,5 %	6,9 %	10,0 %	13,4 %
Index (2008 = 100)	100	154	225	301

(88)Following the anti-dumping investigation on the main raw material and upstream product (aluminium foil in jumbo reels), which resulted in the imposition of duties in 2009 on Chinese producers, import volumes from the PRC increased substantially. The volume of imports of the product concerned increased by more than 200 % over the period considered.(89)The market share held by Chinese exporting producers shows the same increasing trend of the imports over the period considered, passing from 4,5 % in 2008 to 13,4 % during the IP.3.2.Prices of dumped imports and price undercutting(90)Average prices of imports from the PRC developed as follows:

Table 3Prices of imports from the PRCNo price available as the CN code 76071111 for aluminium foil was created in 2009Source: Eurostat

	2008	2009	2010	IP
Average CIF price in EUR/tonnes		2335	2600	2518
Index (2009 = 100)		100	111	108

(91)It should be stated that Chinese import prices follow, to a large extent, Chinese raw material prices (mainly aluminium alloys). However, import prices fell by 3 % in the IP as compared to 2010 at a time when raw material prices increased by around 4 % (see table below).

Table 4Development of average Chinese aluminium pricesSource: Shanghai Futures Exchange (SHFE) excluding VAT

	2008	2009	2010	IP
SHFE monthly spot weighted average price per tonne (EUR)	1408	1187	1467	1523
Index (2008 = 100)	100	84	104	108

(92)As all known Chinese imports were of private label business, undercutting (and underselling) comparisons were made on the basis of Union industry sales of private label products only.(93)In order to determine price undercutting during the IP, the weighted average sales prices per product type of the sampled Union producers charged to unrelated customers on the Union market, adjusted to an ex-works level, were compared to the corresponding weighted average prices of the imports from the cooperating Chinese producers to the first independent customer on the Union market, established on a CIF basis, with appropriate adjustments for the existing customs duties and post-importation costs.(94)The price comparison was made on a type-by-type basis for transactions at the same level of trade, duly adjusted where necessary, and after deduction of rebates and discounts. The result of the comparison, when expressed as a percentage of the sampled Union producers' turnover during the IP, showed a weighted average undercutting margin of 10,0 % by the Chinese exporting producers.4.Economic Situation of the Union Industry4.1.Preliminary remarks(95)Pursuant to Article 3(5) of the basic Regulation, the Commission examined all relevant economic factors and indices having a bearing on the state of the Union industry.(96)The macroeconomic indicators (production, capacity, capacity utilization, sales volume and market share) were assessed at the level of the whole Union industry. The assessment was based on the information provided by the complainant, cross-checked with data provided by the cooperating Union producers.(97)The analysis of microeconomic indicators (average unit prices, employment, wages, productivity, stocks, profitability, cash flow, investments, return on investments and ability to raise capital) was carried out at the level of the sampled Union producers. The assessment was based on their information, duly verified.4.2.Macro-economic indicators4.2.1.Production, production capacity and capacity utilisation

Table 5Total Union production, production capacity and capacity utilisation

	2008	2009	2010	IP
Production volume (tonnes)	95500	95000	93000	91000
Index (2008 = 100)	100	99	97	95
Production capacity (tonnes)	160000	164000	164000	164000
Index (2008 = 100)	100	103	103	103
Capacity utilisation	59,7 %	57,9 %	56,7 %	55,5 %
Index (2008 = 100)	100	97	95	93

(98)The table above shows that production decreased over the period considered despite consumption remaining stable throughout the same period. Although the production capacity remained moderately stable over the period considered, the capacity utilisation followed the same declining trend of the production.4.2.2.Sales volume and market share

Table 6Sales volume and market share

	2008	2009	2010	IP
Sales volume on the EU market (tonnes)	91000	91500	87700	82456
Index (2008 = 100)	100	101	96	91
Market share	95,2 %	92,3 %	89,5 %	85,2 %
Index (2008 = 100)	100	97	94	90

(99)The Union industry sales volume decreased by 9 % over the period considered and its market share continuously dropped from 95,2 % in 2008 to 85,2 % during the IP.4.2.3.Growth(100)The drop in EU sales volumes and market share of the Union industry over the period considered should be seen in the context of stable consumption over the same period, as described in recital (85).4.3.Data of the sampled Union producers (micro-economic indicators)4.3.1.Average unit prices in the Union and cost of production

Table 7Sales prices

	2008	2009	2010	IP
Unit price in EU to unrelated customers(Euro per tonne)	4479	3950	4237	4378
Index (2008 = 100)	100	88	95	98

(101)The trend of the average sales prices (including branded and non-branded products) shows a decrease of 2 % over the period considered. However, sales prices were not considered to be a reliable indicator of injury because they were largely affected by the prices of raw materials (mainly aluminium) which showed a similar trend over the period considered. Overall, prices in 2010 and the IP were suppressed due to the undercutting described in recital (94) above.4.3.2.Employment, productivity and wages

Table 8Employment, productivity and wages

	2008	2009	2010	IP
Number of employees	301	314	287	284
Index (2008 = 100)	100	104	95	94
Productivity (unit/employee)	143	138	141	138
Index (2008 = 100)	100	96	98	96
Wages per employee	41070	38913	44115	43600
Index (2008 = 100)	100	95	107	106

(102)The number of employees decreased by 6 % over the period considered, although wages per employee increased slightly. In addition the decrease of employees did not lead to an increase in productivity as the loss in sales volumes, as described in recital (99) above, was even stronger. Indeed, the productivity of the Union industry workforce, measured as output per person employed per year, decreased slightly over the period considered. It reached its lowest level in 2009, after which it started to recover in the 2010, without reaching the initial levels. In the IP the productivity returned to the 2009 lowest level.4.3.3.Stocks

Table 9Stocks

	2008	2009	2010	IP
Closing stock	2873	2994	3092	3534
Index (2008 = 100)	100	104	108	123
Closing stock as percentage of production	6,7 %	6,9 %	7,7 %	9,1 %
Index (2008 = 100)	100	104	115	136

(103)Although the sampled companies of the Union industry maintained their stocks at a low level using a production to order system, some common products were kept in stock. The stock level increased significantly both in absolute terms and as percentage of production. Over the period concerned, the end of year stock level increased from 6,7 % to 9,1 %.4.3.4.Profitability, cash flow, investments, return on investments and ability to raise capital

Table 10Profitability

	2008	2009	2010	IP
Profitability of EU sales (% of net sales)	2,7 %	6,2 %	2,7 %	0,7 %
Index (2008 = 100)	100	231	101	27

(104)Profitability of the Union industry was established by expressing the pre-tax net profit of the sales of the like product as a percentage of the turnover of these sales. The profitability thus calculated reached its highest level in 2009 due to decreased purchase costs of the main raw material item (i.e. aluminium). Profit fell from 2009 onwards reaching 0,7 % in the IP. These profitability figures cover all segments of the market, including the relatively profitable branded segment which was to a much lesser extent subject to competition from the low priced Chinese imports. Indeed, the private label segment alone was substantially loss-making in the IP.(105)Ability to raise capital was not mentioned as a significant problem by the Union industry.

Table 11Cash flow, investments and return on investment (ROI)

	2008	2009	2010	IP
Cash Flow	12716283	17369815	12030581	7771917
Index (2008 = 100)	100	137	95	61
Investments (EUR)	4604286	2167756	2770090	1716570
Index (2008 = 100)	100	47	60	37
Return on Investment	33,3 %	68,7 %	27,2 %	7,4 %
Index (2008 = 100)	100	206	82	22

(106)The trend in cash flow, which is the ability of the industry to self-finance its activities, as well as return on investment, followed a similar negative trend as the return on turnover.(107)In 2008 an EU producer invested in extra storage facilities. In the other years of the period considered, no major investments were identified in respect of the sampled companies of the Union industry.4.3.5.Magnitude of the actual dumping margin(108)The dumping margins are specified above in the dumping section. All margins established are significantly above the de minimis level. Furthermore, given the volume and the prices of dumped imports from the PRC the impact on the EU market of the actual margin of dumping cannot be considered negligible.5.Conclusion on Injury(109)The investigation showed that many of the injury indicators pertaining to the economic situation of the Union industry deteriorated or did not develop in line with consumption during the period considered. This observation particularly applies to the period from 2010 up to the end of the IP.(110)Over the period considered, in the context of a stable consumption, volume of imports from the PRC increased steadily and significantly. At the same time, the Union industry sales volume decreased overall by 9 % and its market share dropped by around 10 percentage points. Also the Union industry's stock volume increased significantly, indicating its inability to sell the product. The low-priced dumped imports increased steadily over the period considered and undercut the prices of the Union industry significantly in the IP.(111)Furthermore, the injury indicators related to the financial performance of the Union industry, such as cash flow and profitability were seriously affected in 2010 and the IP.(112)In the light of the foregoing, it is concluded that the Union industry suffered material injury within the meaning of Article 3(5) of the basic Regulation.F.CAUSATION1.Introduction(113)In accordance with Article 3(6) and 3(7) of the basic Regulation, it was examined whether the dumped imports originating in the PRC have caused injury to the Union industry to a degree that enables it to be classified as material. Known factors other than the dumped imports, which might have injured the Union industry, were examined to ensure that any injury caused by those other factors was not attributed to the dumped imports.2.Effect of the Dumped Imports(114)At the end of 2009 anti-dumping duties were imposed on jumbo reels of aluminium foil originating in the PRC. From this date imports of the product concerned (the downstream product) increased rapidly. These increases coincide with a deterioration of the situation of the Union industry.(115)The investigation showed that the Union consumption remained stable over the period considered, while the volume of dumped imports from the PRC increased dramatically by over 200 %. The market share of these imports also increased from 4,5 % in 2008 to 13,4 % in the IP (i.e. by around 9 percentage points). At the same time, sales volume of the Union industry decreased by 9 % and market share dropped also by 9 percentage points, from 95,2 % in 2008 to 85,2 % in the IP.(116)With regard to the price pressure, it should be highlighted that the Chinese exporting producers undercut the Union industry in the IP. The price pressure at increasing volumes allowed the Chinese exporting producers to win contracts with major customers (retailers and wholesalers). For contracts maintained the Union industry had to forego price increases which it needed to offset increases in aluminium prices. Undercutting in the IP was around 10 % and in that year the Union industry raised average prices by 3 % to reflect increased raw material costs, whereas the Chinese exporting producers reduced their prices on the EU market by around 3 % (see Table 3). This resulted in a significant deterioration in profitability of the Union industry.(117)Based on the above it is concluded that the large increase of the dumped imports from the PRC at prices undercutting those of the Union industry have had a determining role in the material injury suffered by the Union industry, which is reflected in particular in its poor financial situation, in the drop in sales volume and in market share and in the deterioration of many of the injury indicators.3.Effect of Other Factors3.1.Imports from third countries(118)The volume of imports from other third countries during the period considered is shown in the table below. The quantity and price trends were supplied from the complainant based on Eurostat data.

Table 12Imports from third countries

	2008	2009	2010	IP
Imports from third countries	330	764	461	1306
Index (2008 = 100)	100	231	140	396
Market share	0,3 %	0,8 %	0,5 %	1,3 %
Index (2008 = 100)	100	223	136	391

(119)Imports from third countries (mainly India, Russia, Taiwan and Turkey) increased by 300 % over the period considered. However, the total EU market share of these imports still remains marginal. Therefore, they cannot have contributed to the injury suffered by the Union industry during the IP.3.2.Export volumes and prices(120)The volume of exports of the sampled Union producers during the period considered is shown in the table below. The quantity and price trends are verified figures from the sampled producers.

Table 13Exports of the Sampled Union Producers

	2008	2009	2010	IP
EU Export volume	1900	1800	1600	1700
Index (2008 = 100)	100	95	84	89
Exports as percentage of production	2,0 %	1,9 %	1,7 %	1,9 %
Index (2008 = 100)	100	95	86	94
Export Prices	3792	3460	3447	3565
Index (2008 = 100)	100	91	91	94

(121)The sampled producers' export volumes were not significant over the period considered, never representing more than 2 % of the produced volumes. They followed a trend similar to that of the sales volumes in the European market. In view of their limited volumes, the development of exports of the Union industry did not contribute to the material injury suffered.3.3.The impact of the economic crisis(122)The economic crisis did not produce any contraction of the Union consumption during the period considered. As could be expected for non-luxury household products, the financial crisis had no impact on consumption of AHF which remains a very stable product in the food processing and packaging industry. Thus, the economic crisis did not contribute to the injury suffered by the Union industry during the IP.3.4.Competition on the Union market(123)Competition on the Union market is strong bearing in mind that the Union industry is quite diverse (there are over 30 producers) and that one of their main customers is the powerful retail sector.(124)Over many years the major European Union retailers have developed their own brands (private labels) which in respect of AHF has gradually reduced the volume of sales of the producers own brands. This has been detrimental to the Union industry producers which have suffered falls in sales of the more profitable branded segment and forced them into greater competition with each other in the increasing private label segment.(125)However, this development has been a gradual process over many years and the investigation has shown that the private label business has only increased from 83 % to 84 % from 2010 to the IP. Therefore although this increase will have had a small impact on the EU producers it does not explain the magnitude of the injurious trends experienced by them.3.5.Development of the Union industry cost of production(126)It was argued by interested parties that fluctuations in the cost of production, mainly the aluminium price, contributed to the injury.(127)The cost of production of AHF is closely linked to the price development of aluminium the main raw material used to produce this product. The LME is the worldwide benchmark for aluminium prices.

Table 14Development of LME average aluminium pricesSource: LME

	2008	2009	2010	IP
LME cash average price per tonne in USD	2750	1750	2150	2460
Index (2008 = 100)	100	64	78	90

(128)The development seen above resulted from the financial crisis which began around October 2008. Aluminium prices fell on reduced demand and recovered to some extent by the end of the IP. However, the AHF industry normally sets its prices on an LME benchmark basis plus a margin to cover transformation costs and profit. This means that under normal circumstances fluctuations in the LME benchmark do not have a big impact on the situation of the AHF industry as prices of the finished products move in line with LME prices. In fact the Union industry has always existed in an environment of fluctuating aluminium prices.(129)It was also argued that the Union industry has inefficient equipment which contributed to the injury. It must be said that the investigation did not support this view and that in fact EU and Chinese transformation costs as a whole were quite similar. Furthermore any such inefficiency would mean that Union industry profitability would have been low for many years and this kind of claim does not explain the loss of market share, sales volume and profitability which occurred from 2009 to the IP.(130)In view of the above, the fluctuating aluminium prices or the alleged lack of production efficiency cannot be considered a cause of the injury suffered by the Union industry.3.6.Overcapacity(131)As mentioned above the capacity utilisation of the European producers was relatively low over the period considered. However, as the Union producers are able to use the same machinery for rewinding other products (such as cling film) the capacity utilisation figures are not considered to be a major causation factor. Also the capacity utilisation figures were already quite low in 2008 and 2009 when profitability rates and the situation of the industry in general were satisfactory.(132)It was therefore concluded that overcapacity was not a substantial cause of the injury suffered by the EU producers.4.Conclusion on Causation(133)The above analysis demonstrated that there was a substantial increase in the volume and market share of the dumped imports originating in the PRC particularly in 2010 and the IP. It was found that these imports undercut the prices charged by the Union industry on the Union market during the IP.(134)This increase in volume and market share of the low-priced dumped imports from the PRC coincided with the negative development in the economic situation of the Union industry. This situation worsened in the IP, when the Union industry continued to lose market share and profitability and other financial indicators such as cash flow and return on investments reached their lowest levels.(135)The analysis of the other known factors, including the economic crisis, showed that any negative impact of these factors cannot be such as to break the causal link established between the dumped imports from the PRC and the injury suffered by the Union industry.(136)Based on the above analysis, which has properly distinguished and separated the effects of all known factors on the situation of the Union industry from the injurious effects of the dumped exports, it is provisionally concluded that the dumped exports from the PRC have caused material injury to the Union industry within the meaning of Article 3(6) of the basic Regulation.G.UNION INTEREST1.Preliminary Remarks(137)In accordance with Article 21 of the basic Regulation, the Commission examined whether, despite the provisional conclusion on injurious dumping, compelling reasons existed for concluding that it is not in the Union interest to adopt measures in this particular case. The analysis of the Union interest was based on an appreciation of all the various interests involved, including those of the Union industry, importers/wholesalers and retailers of the product concerned.2.Interest of the Union Industry(138)The Union industry has suffered material injury caused by the dumped imports from the PRC. It is recalled that many of the injury indicators showed a negative trend during the period considered. In the absence of measures, a further deterioration in the Union industry's situation appears unavoidable. The situation of the Union industry deteriorated rapidly following the imposition of anti-dumping measures on the upstream product (aluminium foil in jumbo reels) in 2009. As the same structural problems in the Chinese aluminium sector already observed during that investigation continue to exist on the market, the Union industry argued that it too should be protected from unfair competition.(139)It is expected that the imposition of provisional anti-dumping duties will restore effective trade conditions on the Union market, allowing the Union industry to align the prices of the product investigated to reflect the costs of the various components and the market conditions. It can also be expected that the imposition of provisional measures would enable the Union industry to regain at least part of the market share lost during the period considered, with a further positive impact on its profitability and overall financial situation.(140)Should measures not be imposed, further losses in market share could be expected and the Union industry would remain loss-making, notably in the private label sector. This would be unsustainable in the medium to long-term. In view of the decreasing trend in profitability and of other financial indicators such as cash flow and return on investments, it can be expected that most Union producers would be unable to remain competitive on the market, should measures not be imposed.(141)Furthermore the Union industry supplies its customers (mainly retailers and wholesalers) with other food processing and packaging products such as cling film and paper products. Some of these products are produced on the same rewinding equipment as is used for the product concerned. The product concerned is a major segment of the portfolio of products sold by the various Union industry companies to the extent that for some it represents more than 50 % of turnover. If the situation of the product concerned deteriorates further this would jeopardise the Union production of the other products too.(142)It is therefore provisionally concluded that the imposition of anti-dumping duties would be in the interest of the Union industry.3.Interest of Importers/Wholesalers(143)As regards importers, a large proportion of imports of the product concerned, estimated at around 50 % during the IP, are made by two large players on the European market which source their products in the PRC.(144)One of those importers is related to a sampled co-operating exporting producer (CeDo Shanghai). The CeDo Group has developed a dual sourcing strategy whereby the foil it sells on the Union market is produced in both the PRC and the Union. The Group pointed out that anti-dumping measures would threaten this strategy and reduce its profitability. However, the measures proposed are not directed at any particular company but are designed to restore fair trade on the Union market.(145)It is not known to the investigation if the other large importer (Quickpack) is related to any of its Chinese suppliers. This is because, although it has been invited to participate in the investigation it has opted not to cooperate. Therefore, the impact of any duties, of the level proposed, on its business is not clear.(146)Of the remaining importers only two cooperated in this investigation by responding to the questionnaire. Their replies represent around 6 % of total imports from the PRC. These companies claimed that they may be forced to exit the foil market if an anti-dumping duty were imposed, however, other products represented over 80 % of their turnover because these two companies imported many other products in the food and household goods sector.(147)A further importer/producer (Terinex Ltd) did not supply a questionnaire response but supplied its opinion based on the UK market. Terinex Ltd explained that its sourcing from the PRC undercut its own production but that as a small player on the market it did not consider that its imports were injurious to the Union industry. However, if all imports from the PRC are taken into account (recital (87) onwards) then as explained at recital (114) onwards, it is clear that the imports from the PRC are a major cause of the injury suffered by the Union industry. As the turnover of the product concerned is relatively small in relation to the total companies' activities the imposition of measures is not likely to have a severe impact on its total profits.(148)In respect of the importing sector in general (whether related or not) it cannot be excluded that the imposition of measures would negatively affect this sector because a duty is likely to make imports less attractive and the Union industry would probably be able to win back some orders/contracts to the detriment of the importing sector. Nevertheless, this would be on the basis of a restoration of fair competition and the impact on the importing sector as a whole would not be disproportionate.(149)On the basis of the above, it is provisionally concluded that the impact on importers would not be as such that the measures have to be considered to be against the overall Union interest.4.Interest of Retailers(150)Six retailers co-operated in the investigation. These retailers can be considered representative in view of their wide spread of geographic location in the European Union as well as their differing size in terms of turnover. All of them oppose the imposition of any measures on the grounds that those will impose extra costs on their businesses and that measures would restrict their choice of suppliers.(151)However, it is very clear from their responses that the product under investigation is a tiny part of these retailers' turnover (in any case less than 1 %) and any anti-dumping measure would have little or no impact on their turnover or profits.5.Interest of Consumers(152)The Commission contacted one association of consumers which replied that it was not interested in cooperating in the investigation. No other consumers’ association made itself known.(153)The impact of anti-dumping duties on consumers is likely to be very marginal since AHF forms a very low percentage of a consumer's weekly budget. Furthermore it is expected that any increase in AHF prices at retail level caused by the imposition of duties would be either very marginal or non-existent.6.Conclusion on Union Interest(154)In view of the above, it is provisionally concluded that based on the information available concerning the Union interest, there are no compelling reasons against the imposition of provisional measures on imports of the product concerned originating in the PRC.H.PROPOSAL FOR PROVISIONAL ANTI-DUMPING MEASURES1.Injury Elimination Level(155)In view of the conclusions reached with regard to dumping, injury, causation and Union interest, provisional anti-dumping measures should be imposed in order to prevent further injury being caused to the Union industry by the dumped imports.(156)For the purpose of determining the level of these measures, account was taken of the dumping margins found and the amount of duty necessary to eliminate the injury sustained by the Union industry, without exceeding the dumping margins found.(157)When calculating the amount of duty necessary to remove the effects of the injurious dumping, it was considered that any measures should allow the Union industry to cover its costs of production and to obtain a profit before tax that could be reasonably achieved by an industry of this type in the sector under normal conditions of competition, i.e. in the absence of dumped imports, on sales of the like product in the Union.(158)In previous investigations involving AHF (jumbo reels) the margin of normal profit was set at 5 % on the basis described above. The complainant claimed that 6 % would be a reasonable profit margin, for the industry, in the absence of injurious dumping. However, it failed to duly substantiate this claim and therefore, in the absence of other comments in this regard, it is considered appropriate to resort to the 5 % profit margin established in the previous investigation. It is thus provisionally considered that a profit margin of 5 % of turnover could be regarded as an appropriate figure which the Union industry could have expected to obtain in the absence of injurious dumping. On this basis, a non-injurious price was calculated for the Union industry for the like product. The non-injurious price was obtained by subtracting from the EU sales prices the actual profit achieved during the IP and replacing it by the above mentioned profit margin.(159)The necessary price increase was then determined on the basis of a comparison of the weighted average import price of the cooperating exporting producers in the PRC, as established for the price undercutting calculations, with the non-injurious price of the products sold by the Union industry on the Union market during the IP. Any difference resulting from this comparison was then expressed as a percentage of the average total CIF import value.2.Provisional Measures(160)In the light of the foregoing, it is considered that, in accordance with Article 7(2) of the basic Regulation, provisional anti-dumping measures should be imposed in respect of imports originating in the PRC at the level of the lower of the dumping and the injury margins, in accordance with the lesser duty rule.(161)On the basis of the above, the anti-dumping duty rates have been established by comparing the injury elimination margins and the dumping margins. Consequently, the proposed anti-dumping duty rates are as follows:

Proposed provisional anti-dumping duties

Company Name	Dumping margin	Injury margin	Provisional Duty
CeDo (Shanghai) Ltd	39,3 %	16,3 %	16,3 %
Ningbo Times Aluminium Foil Technology Co., Ltd	31,4 %	15,5 %	15,5 %
Ningbo Favored Commodity Co., Ltd	28,6 %	13,0 %	13,0 %
Other co-operating companies	35,2 %	15,5 %	15,5 %
Countrywide dumping margin	43,4 %	35,4 %	35,4 %

(162)The individual company anti-dumping duty rates specified in this Regulation were established on the basis of the findings of the present investigation. Therefore, they reflect the situation found during that investigation with respect to these companies. These duty rates (as opposed to the country-wide duty applicable to "all other companies") are thus exclusively applicable to imports of products originating in the PRC and produced by the companies and thus by the specific legal entities mentioned. Imported products produced by any other company not specifically mentioned in the operative part of this Regulation, including entities related to those specifically mentioned, cannot benefit from these rates and shall be subject to the duty rate applicable to "all other companies".(163)Any claim requesting the application of these individual company anti-dumping duty rates (e.g. following a change in the name of the entity or following the setting up of new production or sales entities) should be addressed to the CommissionEuropean Commission, Directorate-General for Trade, Directorate H, 1049 Brussels, Belgium. forthwith with all relevant information, in particular any modification in the company’s activities linked to production, domestic and export sales associated with, for example, that name change or that change in the production and sales entities. If appropriate, the Regulation will accordingly be amended by updating the list of companies benefiting from individual duty rates.I.FINAL PROVISION(164)In the interest of sound administration, a period should be fixed within which the interested parties which made themselves known within the time limit specified in the notice of initiation may make their views known in writing and request a hearing. Furthermore, it should be stated that the findings concerning the imposition of duties made for the purposes of this Regulation are provisional and may have to be reconsidered for the purpose of any definitive measures,HAS ADOPTED THIS REGULATION:

Loading ...