Article 1The Annex to Regulation (EU) No 1344/2011 is amended as follows:(1)the rows for the products listed in Annex I to this Regulation are inserted;(2)the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 July 2012.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 21 June 2012.For the CouncilThe PresidentM. FrederiksenANNEX I

Products referred to in point (1) of Article 1Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p. 1).

CN code	TARIC	Description	Rate of autonomous duty	Date foreseen for mandatory review
ex20094192	20	Pineapple juice:	8 %	31.12.2015
ex20094199	70	not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry	8 %	31.12.2015
ex20098979	20	Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more	0 %	31.12.2016
ex28111980	20	Hydrogen iodide (CAS RN 10034-85-2)	0 %	31.12.2016
28191000		Chromium trioxide (CAS RN 1333-82-0)	0 %	31.12.2016
ex28199090	10	Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9)	0 %	31.12.2016
ex28269080	15	Lithium hexafluorophosphate (CAS RN 21324-40-3)	0 %	31.12.2016
ex28500020	40	Germanium tetrahydride (CAS RN 7782-65-2)	0 %	31.12.2016
ex29033990	15	Perfluoro(4-methyl-2-pentene), (CAS RN 84650-68-0)	0 %	31.12.2016
ex29038990	40	Hexabromocyclododecane	0 %	31.12.2016
ex29072900	40	2,3,5-Trimethylhydroquinone (CAS RN 700-13-0)	0 %	31.12.2016
ex29072900	45	2-Methylhydroquinone (CAS RN 95-71-6)	0 %	31.12.2016
ex29092000	10	8-Methoxycedrane (CAS RN 19870-74-7)	0 %	31.12.2016
ex29093038	20	1,1’-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene], (CAS RN 21850-44-2)	0 %	31.12.2016
ex29109000	80	Allyl glycidyl ether (CAS RN 106-92-3)	0 %	31.12.2016
ex29141990	40	Pentan-2-one (CAS RN 107-87-9)	0 %	31.12.2012
ex29142900	50	trans-β-Damascone (CAS RN 23726-91-2)	0 %	31.12.2016
ex29145000	40	4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)	0 %	31.12.2016
ex29146990	40	p-Benzoquinone (CAS RN 106-51-4)	0 %	31.12.2016
ex29147000	50	3’-Chloropropiophenone (CAS RN 34841-35-5)	0 %	31.12.2013
ex29161200	50	2-Hydroxyethyl acrylate with a purity by weight of 97 % or more (CAS RN 818-61-1)	0 %	31.12.2016
ex29163100	10	Benzyl benzoate (CAS RN 120-51-4)	0 %	31.12.2016
ex29189990	80	Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate, (CAS RN 62476-59-9)	0 %	31.12.2016
ex29199000	50	Triethyl phosphate (CAS RN 78-40-0)	0 %	31.12.2016
ex29224985	10	Ornithine aspartate (INNM), (CAS RN 3230-94-2)	0 %	31.12.2013
ex29242998	63	N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)	0 %	31.12.2016
ex29280090	30	N-Isopropylhydroxylamine (CAS RN 5080-22-8)	0 %	31.12.2016
ex29309099	13	Mercaptamine hydrochloride (CAS RN 156-57-0)	0 %	31.12.2016
ex29309099	18	1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret, (CAS RN 106310-17-2)	0 %	31.12.2016
ex29319090	18	Trioctylphosphine oxide (CAS RN 78-50-2)	0 %	31.12.2016
ex29329900	20	Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)	0 %	31.12.2016
ex29332990	70	Cyazofamid (ISO), (CAS RN 120116-88-3)	0 %	31.12.2016
ex29333999	70	2,3-Dichloro-5-trifluoromethylpyridine, (CAS RN 69045-84-7)	0 %	31.12.2016
ex29333999	72	5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one, (CAS RN 120014-30-4)	0 %	31.12.2016
ex29335995	72	Triacetylganciclovir (CAS RN 86357-14-4)	0 %	31.12.2016
ex29336980	72	Diethylhexyl butamido triazone (INCI), (CAS RN 154702-15-5)	0 %	31.12.2016
ex29339980	67	Candesartan ethyl ester (INNM), (CAS RN 139481-58-6)	0 %	31.12.2016
ex29349990	43	Clopidogrel acid hydrochloride (CAS RN 144750-42-5)	0 %	31.12.2016
ex29349990	48	Propan-2-ol - 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate, (CAS RN 864743-41-9)	0 %	31.12.2016
ex29350090	48	(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid - 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1), (CAS RN 1235588-99-4)	0 %	31.12.2016
ex32041200	10	Dye C.I. Acid Blue 9	0 %	31.12.2016
ex32041700	15	Dye C.I. Pigment Green 7	0 %	31.12.2016
ex32041700	20	Dye C.I. Pigment Blue 15:3	0 %	31.12.2016
ex32041700	25	Dye C.I. Pigment Yellow 14	0 %	31.12.2016
ex32041700	35	Dye C.I. Pigment Red 202	0 %	31.12.2016
ex32041700	45	Dye C.I. Pigment Violet 27	0 %	31.12.2016
ex32042000	20	Dye C.I. Fluorescent Brightener 71	0 %	31.12.2016
ex32042000	30	Dye C.I. Fluorescent Brightener 351	0 %	31.12.2016
ex32050000	20	Dye C.I. Carbon Black 7 Lake	0 %	31.12.2016
ex32061900	10	Preparation containing by weight:72 % (± 2 %) of mica and28 % (± 2 %) of titanium dioxide	0 %	31.12.2016
ex38019000	10	Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)	0 %	31.12.2016
ex38123080	55	UV stabilizer, containing:2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) andeither N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) orN,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)	0 %	31.12.2016
ex38123080	60	Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9)	0 %	31.12.2016
ex38123080	65	Stabiliser for plastic material containing:2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)	0 %	31.12.2016
ex38123080	70	Light stabiliser containing:branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and1-methoxy-2-propyl acetate (CAS RN 108-65-6)	0 %	31.12.2016
ex38151990	10	Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)	0 %	31.12.2016
ex38151990	87	Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)	0 %	31.12.2016
ex85069000	10		0 %	31.12.2016
ex38170080	30	Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms	0 %	31.12.2016
ex38249097	26	Aqueous dispersion, containing by weight:76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)	0 %	31.12.2016
ex38249097	31	Mixture containing by weight:70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)	0 %	31.12.2016
ex38249097	32	Mixture of:basic zirconium carbonate (CAS RN 57219-64-4) andcerium carbonate (CAS RN 537-01-9)	0 %	31.12.2016
ex38249097	33	Preparation, containing:trioctylphosphine oxide (CAS RN 78-50-2),dioctylhexylphosphine oxide (CAS RN 31160-66-4),octyldihexylphosphine oxide (CAS RN 31160-64-2) andtrihexylphosphine oxide (CAS RN 597-50-2)	0 %	31.12.2016
ex39039090	60	Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form	0 %	31.12.2016
ex39119099	60		0 %	31.12.2016
ex39043000	30	Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:	0 %	31.12.2013
ex39044000	91	87 % or more but not more than 92 % of vinyl chloride,2 % or more but not more than 9 % of vinyl acetate and1 % or more but not more than 8 % of vinyl alcohol,in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink	0 %	31.12.2013
ex39072011	50	[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2)	0 %	31.12.2016
ex39072011	60	Preparation containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) andα-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)	0 %	31.12.2016
ex39122011	10	Nitrocellulose	0 %	31.12.2016
ex39191080	80	Acrylic tape put up in rolls:	0 %	31.12.2016
ex39199000	83	self-adhesive on both sides,of a total thickness of 0,04 mm or more, but not more than 1,25 mm,of a total width of 5 mm or more but not more than 1205 mmfor use in the manufacture of products of headings 8521 and 8528	0 %	31.12.2016
ex39199000	51	Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet	0 %	31.12.2013
ex39199000	85	Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper:having a minimum reflectance of 93,5 % as determined by ASTM G173-03,covered on one side with a removable layer of polyethylene,covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner	0 %	31.12.2016
ex39199000	87	Self adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including:an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm,a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm	0 %	31.12.2016
ex39201028	91	Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:is repetitive and equally spaced along the length of the filmis equally and visibly aligned when viewed from the back or front of the film	0 %	31.12.2013
ex39202021	40	Sheets of biaxially — oriented polypropylene film:with the thickness of not more than 0,1 mm,printed on both sides with specialised coatings to allow banknote security printing	0 %	31.12.2016
ex39202029	50	Sheet of polypropylene in the form of a roll:	0 %	31.12.2016
ex85079030	95	with a thickness of not more than 30 μm,of a width of not more than 210 mm,conforming to ASTM D882,for use in the manufacture of separators for lithium-ion electric vehicle batteries	0 %	31.12.2016
ex39205100	30	Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm	0 %	31.12.2013
ex39209100	93	Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mmfor use in the manufacture of heat-reflecting or decorative laminated glass	0 %	31.12.2013
ex39219090	10	Roll of polymer-metal laminate comprising:	0 %	31.12.2016
ex85079080	50	a layer of poly(ethylene terephthalate),a layer of aluminium,a layer of polypropylene,with a width of not more than 275 mm,a total thickness of not more than 165 μm, andconforming to ASTM D1701-91 and ASTM D882-95Afor use in the manufacture of lithium-ion electric vehicle batteries	0 %	31.12.2016
ex39231000	10	Photomask compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask from surface or cosmetic damage andwith or without a gasket seal,of a kind used in the photolithography production to house photomasks	0 %	31.12.2016
ex39269097	80	Parts of car radio front panelsof acrylonitrile-butadiene-styrene with or without polycarbonate,coated with a copper, a nickel and a chrome layers,with a total thickness of coating of 5,54 μm or more but not more than 22,3 μm	0 %	31.12.2016
ex73181499	20	Rock bolt:	0 %	31.12.2016
ex73181499	29	being a self-tapping screw,with a length of more than 300 mm,of a kind used for support of mines	0 %	31.12.2016
ex73269098	40	TV pedestal stand with metal upper part for fixation and stabilization of TV cabinet case/body	0 %	31.12.2016
ex85299049	10
ex85299092	60
ex74101100	10	Roll of laminate foil of graphite and copper, with:	0 %	31.12.2016
ex85079080	60	—a width of 610 mm or more but not more than 620 mm, and
ex85459090	30	—a diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric vehicle batteries
ex74102200	10	Cut plate of nickel-plated copper foil, with:	0 %	31.12.2016
ex85079080	70	a width of 70 mm (± 5 mm),a thickness of 0,4 mm (± 0,2 mm),a length of not more than 55 mm,for use in the manufacture of lithium-ion electric vehicle batteries	0 %	31.12.2016
ex76071190	40	Aluminium foil in rolls:having a purity of 99,99 % by weight,of a thickness of 0,021 mm or more but not more than 0,2 mm,with a width of 500 mm,with a surface oxide layer by 3 to 4 nm thick,and with a cubic texture of more than 95 %	0 %	31.12.2016
ex76071990	10	Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:	0 %	31.12.2016
ex85079080	80	a width of 595 mm or more but not more than 605 mm, anda diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electric vehicle batteries	0 %	31.12.2016
ex76169990	70	Connecting components for use in the production of helicopter tail rotor shafts	0 %	31.12.2016
ex84828000	10
ex88033000	40
ex81089030	40	Wire of an titanium alloy containing by weight22 % (± 3 %) of vanadium and4 % (± 0,5 %) of aluminium	0 %	31.12.2016
ex81089050	70	Strip of an alloy of titanium, containing by weight15 % (± 1 %) of vanadium3 % (± 0,5 %) of chromium3 % (± 0,5 %) of tin and3 % (± 0,5 %) of aluminium	0 %	31.12.2016
ex81089050	75	Plates, sheets, strips and foil of titanium alloy, containing by weight:0,3 % or more but not more than 0,7 % of aluminium and0,25 % or more but not more than 0,6 % of silicon	0 %	31.12.2016
ex81089050	80	Plates, sheets, strips and foil of cold rolled titanium alloy, containing by weight not more than:0,25 % of iron,0,20 % of oxygen,0,08 % of carbon,0,03 % of nitrogen and0,013 % of hydrogen	0 %	31.12.2016
ex81089090	20	Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium	0 %	31.12.2016
ex90039000	10		0 %	31.12.2016
ex81130020	10	Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide	0 %	31.12.2016
ex84099100	10	Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means	0 %	31.12.2016
ex84099900	20
ex84145980	40	Cross-flow fan, with;	0 %	31.12.2016
ex84149000	60	a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm),a diameter of 95 mm (± 0,6 mm) or 102 mm (± 0,6 mm),an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C),for use in the manufacture of indoor units of split-type air conditioning machines	0 %	31.12.2016
ex85013100	60	Brushless DC motor that can revolve counter clockwise (CCW), with:an input voltage of 264 V or more, but not more than 391 V,an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm),an output power of not more than 125 W,E or B class winding insulation,for use in the manufacture of indoor or outdoor units of split-type air conditioning machines	0 %	31.12.2016
ex85044082	40	Printed circuit board equipped with a bridge rectifier circuit and other active and passive componentswith two output connectorswith two input connectors which are available and useablein parallelable to switch between bright and dimmed operation modewith an input voltage of 40 V (+ 25 % –15 %) or 42 V (+ 25 % –15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, orwith an input voltage of 230 V (+ 20 % –15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, orwith an input voltage of 120 V (15 % –35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation modewith an input current reaching 80 % of its nominal value within 20 mswith an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versionswith an maximum inrush current overshoot of not more than 250 % of the input currentwith a period of the inrush current overshoot of not more than 100mswith an input current undershoot of not less than 50 % of the input currentwith a period of the inrush current undershoot of not more than 20mswith a presettable output currentwith an output current reaching 90 % of its nominal pre-set value within 50 mswith an output current reaching zero within 30 ms after removal of the input voltagewith an defined failure status in case of no-load or too-high load (end-of-life function)	0 %	31.12.2012
ex85051100	31	Permanent magnet having a remanence of 455 mT (± 15 mT)	0 %	31.12.2013
ex85051100	40	Neodymium-ferro ring with an external diameter of not more than 13 mm, an internal diameter of not more than 9 mm	0 %	31.12.2013
ex85076000	65	Cylindrical Lithium Ion Cell with3,5 VDC to 3,8 VDC,300 mAh to 900 mAh anda diameter of 10,0 mm to 14,5 mm	0 %	31.12.2016
ex85076000	75	Rectangular lithium-ion-accumulator, witha metal casing,a length of 173 mm (± 0,15 mm),a width of 21 mm (± 0,1 mm),a height of 91 mm (± 0,15 mm),a nominal voltage of 3,3 V and,a nominal capacity of 21 Ah or more	0 %	31.12.2016
ex85299092	50	Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with background lighting, micro-controller,with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with or without a heat sink at the back of the housing,without a signal-processing module,for use in the manufacture of vehicles of chapter 87	0 %	31.12.2015
ex87088099	10	Piston rod for shock-absorbers used in vehicle suspension systems with:a diameter at its widest point of 12,4 mm or more, but not more than 28 mm,a length of 236,5 mm or more, but not more than 563,5 mm	0 %	31.12.2016
ex88033000	50	Pre-formed helicopter rotor shaftsof circular cross-section,with a length of 1249,68 mm or more, but not more than 1496,06 mm,of an external diameter of 81,356 mm or more, but not more than 82,2198 mm,swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm,heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772	0 %	31.12.2016
ex90011090	30	Polymer optical fibre with:a poly(methyl methacrylate) core,a cladding of fluorinated polymer,a diameter of not more than 3,0 mm, anda length of more than 150 m,of a kind used in the manufacture of polymer fibre cables	0 %	31.12.2016
ex94019080	10	Ratchet disk of a kind used in the manufacture of reclining car seats	0 %	31.12.2015

ANNEX II

Products referred to in point (2) of Article 1

CN code	TARIC
20094192	70
20094199	70
20098979	92
28191000
29141990	40
29143900	20
29147000	50
29183000	50
29224985	10
32061100	20
38151990	10
38151200	20
38151200	30
39044000	91
39199000	51
39201028	91
39205100	30
39209100	93
83024200	80
85051990	31
85299092	50
94019080	10

Amendments and corrections
December 31, 2013	Repealed by 32013R1387
July 1, 2012	Application - See Art 2
June 27, 2012	Entry into force - Date pub. See Art 2

Council Regulation (EU) No 552/2012 of 21 June 2012 amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products