| CN code | TARIC | Description | Rate of autonomous duty | Date foreseen for mandatory review |
|---|
| ex20094192 | 20 | Pineapple juice: | 8 % | 31.12.2015 |
| ex20094199 | 70 | - not from concentrate,
- of the genus Ananas,
- of a Brix value of 11 or more but not more than 16,
used in the manufacture of products of drink industry |
| ex20098979 | 20 | Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more | 0 % | 31.12.2016 |
| ex28111980 | 20 | Hydrogen iodide (CAS RN 10034-85-2) | 0 % | 31.12.2016 |
| 28191000 | | Chromium trioxide (CAS RN 1333-82-0) | 0 % | 31.12.2016 |
| ex28199090 | 10 | Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) | 0 % | 31.12.2016 |
| ex28269080 | 15 | Lithium hexafluorophosphate (CAS RN 21324-40-3) | 0 % | 31.12.2016 |
| ex28500020 | 40 | Germanium tetrahydride (CAS RN 7782-65-2) | 0 % | 31.12.2016 |
| ex29033990 | 15 | Perfluoro(4-methyl-2-pentene), (CAS RN 84650-68-0) | 0 % | 31.12.2016 |
| ex29038990 | 40 | Hexabromocyclododecane | 0 % | 31.12.2016 |
| ex29072900 | 40 | 2,3,5-Trimethylhydroquinone (CAS RN 700-13-0) | 0 % | 31.12.2016 |
| ex29072900 | 45 | 2-Methylhydroquinone (CAS RN 95-71-6) | 0 % | 31.12.2016 |
| ex29092000 | 10 | 8-Methoxycedrane (CAS RN 19870-74-7) | 0 % | 31.12.2016 |
| ex29093038 | 20 | 1,1’-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene], (CAS RN 21850-44-2) | 0 % | 31.12.2016 |
| ex29109000 | 80 | Allyl glycidyl ether (CAS RN 106-92-3) | 0 % | 31.12.2016 |
| ex29141990 | 40 | Pentan-2-one (CAS RN 107-87-9) | 0 % | 31.12.2012 |
| ex29142900 | 50 | trans-β-Damascone (CAS RN 23726-91-2) | 0 % | 31.12.2016 |
| ex29145000 | 40 | 4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2) | 0 % | 31.12.2016 |
| ex29146990 | 40 | p-Benzoquinone (CAS RN 106-51-4) | 0 % | 31.12.2016 |
| ex29147000 | 50 | 3’-Chloropropiophenone (CAS RN 34841-35-5) | 0 % | 31.12.2013 |
| ex29161200 | 50 | 2-Hydroxyethyl acrylate with a purity by weight of 97 % or more (CAS RN 818-61-1) | 0 % | 31.12.2016 |
| ex29163100 | 10 | Benzyl benzoate (CAS RN 120-51-4) | 0 % | 31.12.2016 |
| ex29189990 | 80 | Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate, (CAS RN 62476-59-9) | 0 % | 31.12.2016 |
| ex29199000 | 50 | Triethyl phosphate (CAS RN 78-40-0) | 0 % | 31.12.2016 |
| ex29224985 | 10 | Ornithine aspartate (INNM), (CAS RN 3230-94-2) | 0 % | 31.12.2013 |
| ex29242998 | 63 | N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) | 0 % | 31.12.2016 |
| ex29280090 | 30 | N-Isopropylhydroxylamine (CAS RN 5080-22-8) | 0 % | 31.12.2016 |
| ex29309099 | 13 | Mercaptamine hydrochloride (CAS RN 156-57-0) | 0 % | 31.12.2016 |
| ex29309099 | 18 | 1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret, (CAS RN 106310-17-2) | 0 % | 31.12.2016 |
| ex29319090 | 18 | Trioctylphosphine oxide (CAS RN 78-50-2) | 0 % | 31.12.2016 |
| ex29329900 | 20 | Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1) | 0 % | 31.12.2016 |
| ex29332990 | 70 | Cyazofamid (ISO), (CAS RN 120116-88-3) | 0 % | 31.12.2016 |
| ex29333999 | 70 | 2,3-Dichloro-5-trifluoromethylpyridine, (CAS RN 69045-84-7) | 0 % | 31.12.2016 |
| ex29333999 | 72 | 5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one, (CAS RN 120014-30-4) | 0 % | 31.12.2016 |
| ex29335995 | 72 | Triacetylganciclovir (CAS RN 86357-14-4) | 0 % | 31.12.2016 |
| ex29336980 | 72 | Diethylhexyl butamido triazone (INCI), (CAS RN 154702-15-5) | 0 % | 31.12.2016 |
| ex29339980 | 67 | Candesartan ethyl ester (INNM), (CAS RN 139481-58-6) | 0 % | 31.12.2016 |
| ex29349990 | 43 | Clopidogrel acid hydrochloride (CAS RN 144750-42-5) | 0 % | 31.12.2016 |
| ex29349990 | 48 | Propan-2-ol - 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate, (CAS RN 864743-41-9) | 0 % | 31.12.2016 |
| ex29350090 | 48 | (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid - 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1), (CAS RN 1235588-99-4) | 0 % | 31.12.2016 |
| ex32041200 | 10 | Dye C.I. Acid Blue 9 | 0 % | 31.12.2016 |
| ex32041700 | 15 | Dye C.I. Pigment Green 7 | 0 % | 31.12.2016 |
| ex32041700 | 20 | Dye C.I. Pigment Blue 15:3 | 0 % | 31.12.2016 |
| ex32041700 | 25 | Dye C.I. Pigment Yellow 14 | 0 % | 31.12.2016 |
| ex32041700 | 35 | Dye C.I. Pigment Red 202 | 0 % | 31.12.2016 |
| ex32041700 | 45 | Dye C.I. Pigment Violet 27 | 0 % | 31.12.2016 |
| ex32042000 | 20 | Dye C.I. Fluorescent Brightener 71 | 0 % | 31.12.2016 |
| ex32042000 | 30 | Dye C.I. Fluorescent Brightener 351 | 0 % | 31.12.2016 |
| ex32050000 | 20 | Dye C.I. Carbon Black 7 Lake | 0 % | 31.12.2016 |
| ex32061900 | 10 | Preparation containing by weight:- 72 % (± 2 %) of mica and
- 28 % (± 2 %) of titanium dioxide
| 0 % | 31.12.2016 |
| ex38019000 | 10 | Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) | 0 % | 31.12.2016 |
| ex38123080 | 55 | UV stabilizer, containing:- 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and
- either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or
- N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)
| 0 % | 31.12.2016 |
| ex38123080 | 60 | Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9) | 0 % | 31.12.2016 |
| ex38123080 | 65 | Stabiliser for plastic material containing:- 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),
- 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and
- 2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)
| 0 % | 31.12.2016 |
| ex38123080 | 70 | Light stabiliser containing:- branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and
- 1-methoxy-2-propyl acetate (CAS RN 108-65-6)
| 0 % | 31.12.2016 |
| ex38151990 | 10 | Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method) | 0 % | 31.12.2016 |
| ex38151990 | 87 | Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) | 0 % | 31.12.2016 |
| ex85069000 | 10 |
| ex38170080 | 30 | Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms | 0 % | 31.12.2016 |
| ex38249097 | 26 | Aqueous dispersion, containing by weight:- 76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)
- 4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and
- 2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)
| 0 % | 31.12.2016 |
| ex38249097 | 31 | Mixture containing by weight:- 70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and
- 20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)
| 0 % | 31.12.2016 |
| ex38249097 | 32 | Mixture of:- basic zirconium carbonate (CAS RN 57219-64-4) and
- cerium carbonate (CAS RN 537-01-9)
| 0 % | 31.12.2016 |
| ex38249097 | 33 | Preparation, containing:- trioctylphosphine oxide (CAS RN 78-50-2),
- dioctylhexylphosphine oxide (CAS RN 31160-66-4),
- octyldihexylphosphine oxide (CAS RN 31160-64-2) and
- trihexylphosphine oxide (CAS RN 597-50-2)
| 0 % | 31.12.2016 |
| ex39039090 | 60 | Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form | 0 % | 31.12.2016 |
| ex39119099 | 60 |
| ex39043000 | 30 | Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: | 0 % | 31.12.2013 |
| ex39044000 | 91 | - 87 % or more but not more than 92 % of vinyl chloride,
- 2 % or more but not more than 9 % of vinyl acetate and
- 1 % or more but not more than 8 % of vinyl alcohol,
in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink |
| ex39072011 | 50 | [3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2) | 0 % | 31.12.2016 |
| ex39072011 | 60 | Preparation containing:- α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and
- α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)
| 0 % | 31.12.2016 |
| ex39122011 | 10 | Nitrocellulose | 0 % | 31.12.2016 |
| ex39191080 | 80 | Acrylic tape put up in rolls: | 0 % | 31.12.2016 |
| ex39199000 | 83 | - self-adhesive on both sides,
- of a total thickness of 0,04 mm or more, but not more than 1,25 mm,
- of a total width of 5 mm or more but not more than 1205 mm
for use in the manufacture of products of headings 8521 and 8528 |
| ex39199000 | 51 | Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet | 0 % | 31.12.2013 |
| ex39199000 | 85 | Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper:- having a minimum reflectance of 93,5 % as determined by ASTM G173-03,
- covered on one side with a removable layer of polyethylene,
- covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner
| 0 % | 31.12.2016 |
| ex39199000 | 87 | Self adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including:- an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm,
- a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm
| 0 % | 31.12.2016 |
| ex39201028 | 91 | Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:- is repetitive and equally spaced along the length of the film
- is equally and visibly aligned when viewed from the back or front of the film
| 0 % | 31.12.2013 |
| ex39202021 | 40 | Sheets of biaxially — oriented polypropylene film:- with the thickness of not more than 0,1 mm,
- printed on both sides with specialised coatings to allow banknote security printing
| 0 % | 31.12.2016 |
| ex39202029 | 50 | Sheet of polypropylene in the form of a roll: | 0 % | 31.12.2016 |
| ex85079030 | 95 | - with a thickness of not more than 30 μm,
- of a width of not more than 210 mm,
- conforming to ASTM D882,
for use in the manufacture of separators for lithium-ion electric vehicle batteries |
| ex39205100 | 30 | Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm | 0 % | 31.12.2013 |
| ex39209100 | 93 | Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:- a visible light transmission of 50 % or more,
- coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),
- a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm
for use in the manufacture of heat-reflecting or decorative laminated glass | 0 % | 31.12.2013 |
| ex39219090 | 10 | Roll of polymer-metal laminate comprising: | 0 % | 31.12.2016 |
| ex85079080 | 50 | - a layer of poly(ethylene terephthalate),
- a layer of aluminium,
- a layer of polypropylene,
- with a width of not more than 275 mm,
- a total thickness of not more than 165 μm, and
- conforming to ASTM D1701-91 and ASTM D882-95A
for use in the manufacture of lithium-ion electric vehicle batteries |
| ex39231000 | 10 | Photomask compacts:- consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,
- having non porous, abrasion resistant or impact resistant surface properties,
- fitted with a specially designed retainer system that protects the photomask from surface or cosmetic damage and
- with or without a gasket seal,
of a kind used in the photolithography production to house photomasks | 0 % | 31.12.2016 |
| ex39269097 | 80 | Parts of car radio front panels- of acrylonitrile-butadiene-styrene with or without polycarbonate,
- coated with a copper, a nickel and a chrome layers,
- with a total thickness of coating of 5,54 μm or more but not more than 22,3 μm
| 0 % | 31.12.2016 |
| ex73181499 | 20 | Rock bolt: | 0 % | 31.12.2016 |
| ex73181499 | 29 | - being a self-tapping screw,
- with a length of more than 300 mm,
of a kind used for support of mines |
| ex73269098 | 40 | TV pedestal stand with metal upper part for fixation and stabilization of TV cabinet case/body | 0 % | 31.12.2016 |
| ex85299049 | 10 |
| ex85299092 | 60 |
| ex74101100 | 10 | Roll of laminate foil of graphite and copper, with: | 0 % | 31.12.2016 |
| ex85079080 | 60 | —a width of 610 mm or more but not more than 620 mm, and |
| ex85459090 | 30 | —a diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of lithium-ion electric vehicle batteries |
| ex74102200 | 10 | Cut plate of nickel-plated copper foil, with: | 0 % | 31.12.2016 |
| ex85079080 | 70 | - a width of 70 mm (± 5 mm),
- a thickness of 0,4 mm (± 0,2 mm),
- a length of not more than 55 mm,
for use in the manufacture of lithium-ion electric vehicle batteries |
| ex76071190 | 40 | Aluminium foil in rolls:- having a purity of 99,99 % by weight,
- of a thickness of 0,021 mm or more but not more than 0,2 mm,
- with a width of 500 mm,
- with a surface oxide layer by 3 to 4 nm thick,
- and with a cubic texture of more than 95 %
| 0 % | 31.12.2016 |
| ex76071990 | 10 | Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: | 0 % | 31.12.2016 |
| ex85079080 | 80 | - a width of 595 mm or more but not more than 605 mm, and
- a diameter of 690 mm or more but not more than 710 mm,
for use in the manufacture of cathodes for lithium-ion electric vehicle batteries |
| ex76169990 | 70 | Connecting components for use in the production of helicopter tail rotor shafts | 0 % | 31.12.2016 |
| ex84828000 | 10 |
| ex88033000 | 40 |
| ex81089030 | 40 | Wire of an titanium alloy containing by weight- 22 % (± 3 %) of vanadium and
- 4 % (± 0,5 %) of aluminium
| 0 % | 31.12.2016 |
| ex81089050 | 70 | Strip of an alloy of titanium, containing by weight- 15 % (± 1 %) of vanadium
- 3 % (± 0,5 %) of chromium
- 3 % (± 0,5 %) of tin and
- 3 % (± 0,5 %) of aluminium
| 0 % | 31.12.2016 |
| ex81089050 | 75 | Plates, sheets, strips and foil of titanium alloy, containing by weight:- 0,3 % or more but not more than 0,7 % of aluminium and
- 0,25 % or more but not more than 0,6 % of silicon
| 0 % | 31.12.2016 |
| ex81089050 | 80 | Plates, sheets, strips and foil of cold rolled titanium alloy, containing by weight not more than:- 0,25 % of iron,
- 0,20 % of oxygen,
- 0,08 % of carbon,
- 0,03 % of nitrogen and
- 0,013 % of hydrogen
| 0 % | 31.12.2016 |
| ex81089090 | 20 | Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium | 0 % | 31.12.2016 |
| ex90039000 | 10 |
| ex81130020 | 10 | Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide | 0 % | 31.12.2016 |
| ex84099100 | 10 | Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means | 0 % | 31.12.2016 |
| ex84099900 | 20 | | | |
| ex84145980 | 40 | Cross-flow fan, with; | 0 % | 31.12.2016 |
| ex84149000 | 60 | - a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm),
- a diameter of 95 mm (± 0,6 mm) or 102 mm (± 0,6 mm),
- an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C),
for use in the manufacture of indoor units of split-type air conditioning machines |
| ex85013100 | 60 | Brushless DC motor that can revolve counter clockwise (CCW), with:- an input voltage of 264 V or more, but not more than 391 V,
- an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm),
- an output power of not more than 125 W,
- E or B class winding insulation,
for use in the manufacture of indoor or outdoor units of split-type air conditioning machines | 0 % | 31.12.2016 |
| ex85044082 | 40 | Printed circuit board equipped with a bridge rectifier circuit and other active and passive components- with two output connectors
- with two input connectors which are available and useablein parallel
- able to switch between bright and dimmed operation mode
- with an input voltage of 40 V (+ 25 % –15 %) or 42 V (+ 25 % –15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or
- with an input voltage of 230 V (+ 20 % –15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or
- with an input voltage of 120 V (15 % –35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode
- with an input current reaching 80 % of its nominal value within 20 ms
- with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions
- with an maximum inrush current overshoot of not more than 250 % of the input current
- with a period of the inrush current overshoot of not more than 100ms
- with an input current undershoot of not less than 50 % of the input current
- with a period of the inrush current undershoot of not more than 20ms
- with a presettable output current
- with an output current reaching 90 % of its nominal pre-set value within 50 ms
- with an output current reaching zero within 30 ms after removal of the input voltage
- with an defined failure status in case of no-load or too-high load (end-of-life function)
| 0 % | 31.12.2012 |
| ex85051100 | 31 | Permanent magnet having a remanence of 455 mT (± 15 mT) | 0 % | 31.12.2013 |
| ex85051100 | 40 | Neodymium-ferro ring with an external diameter of not more than 13 mm, an internal diameter of not more than 9 mm | 0 % | 31.12.2013 |
| ex85076000 | 65 | Cylindrical Lithium Ion Cell with- 3,5 VDC to 3,8 VDC,
- 300 mAh to 900 mAh and
- a diameter of 10,0 mm to 14,5 mm
| 0 % | 31.12.2016 |
| ex85076000 | 75 | Rectangular lithium-ion-accumulator, with- a metal casing,
- a length of 173 mm (± 0,15 mm),
- a width of 21 mm (± 0,1 mm),
- a height of 91 mm (± 0,15 mm),
- a nominal voltage of 3,3 V and,
- a nominal capacity of 21 Ah or more
| 0 % | 31.12.2016 |
| ex85299092 | 50 | Colour LCD display panel for LCD monitors of heading 8528:- with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,
- with background lighting, micro-controller,
- with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,
- in a housing with or without a heat sink at the back of the housing,
- without a signal-processing module,
for use in the manufacture of vehicles of chapter 87 | 0 % | 31.12.2015 |
| ex87088099 | 10 | Piston rod for shock-absorbers used in vehicle suspension systems with:- a diameter at its widest point of 12,4 mm or more, but not more than 28 mm,
- a length of 236,5 mm or more, but not more than 563,5 mm
| 0 % | 31.12.2016 |
| ex88033000 | 50 | Pre-formed helicopter rotor shafts- of circular cross-section,
- with a length of 1249,68 mm or more, but not more than 1496,06 mm,
- of an external diameter of 81,356 mm or more, but not more than 82,2198 mm,
- swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm,
- heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772
| 0 % | 31.12.2016 |
| ex90011090 | 30 | Polymer optical fibre with:- a poly(methyl methacrylate) core,
- a cladding of fluorinated polymer,
- a diameter of not more than 3,0 mm, and
- a length of more than 150 m,
of a kind used in the manufacture of polymer fibre cables | 0 % | 31.12.2016 |
| ex94019080 | 10 | Ratchet disk of a kind used in the manufacture of reclining car seats | 0 % | 31.12.2015 |