Commission Regulation (EC) No 642/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for televisions (Text with EEA relevance)
Modified by
Commission Regulation (EU) No 801/2013of 22 August 2013amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment, and amending Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions(Text with EEA relevance), 32013R0801, August 23, 2013
Commission Regulation (EC) No 642/2009of 22 July 2009implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for televisions(Text with EEA relevance)THE COMMISSION OF THE EUROPEAN COMMUNITIES,Having regard to the Treaty establishing the European Community,Having regard to Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the CouncilOJ L 191, 22.7.2005, p. 29. and in particular Article 15(1) thereof,After consulting the Ecodesign Consultation Forum,Whereas:(1)Under Directive 2005/32/EC ecodesign requirements are to be set by the Commission for energy-using products representing significant volumes of sales and trade, having a significant environmental impact and presenting significant potential for improvement in terms of their environmental impact without entailing excessive costs.(2)Article 16(2) first indent of Directive 2005/32/EC provides that in accordance with the procedure referred to in Article 19(3) and the criteria set out in Article 15(2), and after consulting the Ecodesign Consultation Forum, the Commission shall, as appropriate, introduce implementing measures for consumer electronics.(3)The Commission has carried out a preparatory study which analysed the technical, environmental and economic aspects of televisions. The study has been developed together with stakeholders and interested parties from the Community and third countries, and the results have been made publicly available on the EUROPA website of the Commission.(4)Televisions represent a significant consumer electronic product group in electricity consumption and are therefore a priority in ecodesign policy.(5)The environmental aspect of televisions that is identified as significant for the purposes of this Regulation is the electricity consumption in the use phase.(6)Annual electricity consumption related to televisions was estimated to be 60 TWh in 2007 in the Community, corresponding to 24 Mt CO2 emissions. If no specific measures are taken to limit this consumption, it is predicted that electricity consumption will increase to 132 TWh in 2020. The preparatory study shows that use-phase electricity consumption can be significantly reduced.(7)Other environmental aspects of relevance relate to hazardous substances used in the production of televisions and waste from televisions disposed at the end of life. Improvements in the related environmental impact are addressed in Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipmentOJ L 37, 13.2.2003, p. 19., and Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE)OJ L 37, 13.2.2003, p. 24., respectively, and should not be further addressed by this Regulation.(8)The preparatory study shows that requirements regarding other ecodesign parameters referred to in Annex I, Part 1, to Directive 2005/32/EC are not necessary.(9)Reduction in the electricity consumption of televisions is possible/viable by applying existing non-proprietary cost-effective technologies which lead to a reduction of the combined expenses for purchasing and operating televisions.(10)Ecodesign requirements should harmonise electricity consumption requirements for televisions throughout the Community, thus contributing to the functioning of the internal market and to the improvement of the environmental performance of these products.(11)The ecodesign requirements should not have a negative impact on the functionality of the product or negatively affect health, safety or the environment. In particular, the benefits of reducing electricity consumption during the use phase should more than offset potential additional environmental impacts during the production phase.(12)A progressive introduction of the ecodesign requirements should provide an appropriate timeframe for manufacturers to adapt their products. The timing should be such that negative impacts on the functionalities of equipment already on the market are avoided, and cost impacts for manufacturers, in particular small and medium-sized enterprises, are taken into account, while ensuring timely achievement of the objectives of the Regulation.(13)Measurements of the relevant product parameters should be performed through reliable, accurate and reproducible measurement procedures, which take into account the recognised state of the art measurement methods including, where available, harmonised standards adopted by the European standardisation bodies, as listed in Annex I to Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and of rules on Information Society servicesOJ L 204, 21.7.1998, p. 37..(14)This Regulation should increase the market penetration of technologies that reduce the environmental impact of televisions, leading to estimated electricity savings of 28 TWh by 2020, compared to the situation without taking any measures.(15)In conformity with Article 8 of Directive 2005/32/EC, this Regulation should specify the applicable conformity assessment procedures.(16)In order to facilitate compliance checks, manufacturers should provide information in the technical documentation referred to in Annexes IV and V to Directive 2005/32/EC in so far as this information relates to the requirements laid down in this Regulation.(17)The currently best available on-mode energy efficiency and reduced environmental impacts related to hazardous substances are identified by Commission Decision 2009/300/EC of 12 March 2009 establishing the revised ecological criteria for the award of the Community ecolabel to televisionsOJ L 82, 28.3.2009, p. 3.. Such reference will help ensure wide availability and easy access to information, in particular for small and medium-sized enterprises and very small firms, which will further facilitate the integration of best design technologies for reducing the environmental impact of televisions. Benchmarks for best available technology should therefore not be identified in this Regulation.(18)The ecodesign requirements, applicable from 7 January 2013, pursuant to Commission Regulation (EC) No 1275/2008 of 17 December 2008 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipmentOJ L 339, 18.12.2008, p. 45. should apply to televisions at an earlier point in time than provided for in that Regulation because technologies which comply with its provisions can be implemented within a shorter time with regard to televisions and additional energy savings can be achieved. Regulation (EC) No 1275/2008 should therefore not apply to televisions and should be amended accordingly.(19)The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 19(1) of Directive 2005/32/EC,HAS ADOPTED THE FOLLOWING REGULATION: