Article 1The Annex to Regulation (EC) No 1255/96 is amended as follows:1.the rows for the products listed in Annex I to this Regulation shall be inserted;2.the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation shall be deleted.

Article 2This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.This Regulation shall apply from 1 July 2009. However, it shall apply from 1 January 2009 for the description of products with CN and TARIC code 9001900060 as set out in Annex I to this Regulation.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 25 June 2009.For the CouncilThe PresidentL. MikoANNEX I

Products referred to in Article 1(1)Entry under this subheading is subject to conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993, p. 1)).Amended position.

CN code	TARIC	Description	Rate of autonomous duty	Validity period
ex15119019	10	Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:	0 %	1.7.2009-31.12.2013
ex15119091	10	—industrial monocarboxylic fatty acids of subheading 3823 19 10,
ex15131110	10	—methyl esters of fatty acids of heading 2915 or 2916,
ex15131930	10	—fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,
ex15132110	10	—fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,
ex15132930	10	—stearic acid of subheading 3823 11 00, or
		—goods of heading No 3401

ex15180099	10	Jojoba oil, hydrogenated and texturised	0 %	1.7.2009-31.12.2013
ex28045090	10	Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % by weight	0 %	1.7.2009-31.12.2013
ex28273985	30	Manganese dichloride	0 %	1.7.2009-31.12.2013
ex29033990	75	Trans-1,3,3,3-tetrafluoroprop-1-ene	0 %	1.7.2009-31.12.2013
ex29036990	50	Fluorobenzene	0 %	1.7.2009-31.12.2013
ex29036990	60	α-Chloro(ethyl)toluenes	0 %	1.7.2009-31.12.2013
ex29049040	10	Trichloronitromethane, for the manufacture of goods of subheading 3808 92	0 %	1.7.2009-31.12.2013
ex29091990	60	1-Methoxyheptafluoropropane	0 %	1.7.2009-31.12.2013
ex29211985	60	Tetrakis(ethylmethylamino) zirconium (IV)	0 %	1.7.2009-31.12.2013
ex29215119	20	Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight	0 %	1.7.2009-31.12.2013
ex29222900	46	p-Anisidine-3-sulphonic acid	0 %	1.7.2009-31.12.2013
ex29269095	35	2-Bromo-2(bromomethyl)pentanedinitrile	0 %	1.7.2009-31.12.2013
ex29280090	70	Butanone oxime	0 %	1.7.2009-31.12.2013
ex29310095	20	Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl	0 %	1.7.2009-31.12.2013
ex29321300	10	Tetrahydrofurfuryl alcohol	0 %	1.7.2009-31.12.2013
ex29321900	40	Furan of a purity by weight of 99 % or more	0 %	1.7.2009-31.12.2013
ex29321900	41	2,2 di(tetrahydrofuryl)propane	0 %	1.7.2009-31.12.2013
ex29329900	35	1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol	0 %	1.7.2009-31.12.2013
ex29334910	20	3-Hydroxy-2-methylquinoline-4-carboxylic acid	0 %	1.7.2009-31.12.2013
ex29337900	50	6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione	0 %	1.7.2009-31.12.2013
ex29349990	66	Tetrahydrothiophene-1,1-dioxide	0 %	1.7.2009-31.12.2013
ex32074080	20	Glass flakes coated with silver, of an average diameter of 40 (± 10) μm	0 %	1.7.2009-31.12.2013
ex32082010	20	Immersion topcoat solution containing by weight 2 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate-copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether	0 %	1.7.2009-31.12.2013
ex32089019	50	Solution containing by weight:(65 ± 10) % of γ-butyrolactone,(30 ± 10) % of polyamide resin,(3,5 ± 1,5) % of naphthoquinone ester derivative, and(1,5 ± 0,5) % of arylsilicic acid.	0 %	1.7.2009-31.12.2013
ex32159080	30	Ink, containing by weight 5 % or more, but not more than 10 % of amorphous silicon dioxide, filled into disposable cartridges, for use in the marking of integrated circuits	0 %	1.7.2009-31.12.2013
ex38089190	30	Preparation containing endospores or spores and protein crystals derived from either:Bacillus thuringiensis Berliner subsp. aizawai and kurstaki, orBacillus thuringiensis subsp. kurstaki, orBacillus thuringiensis subsp. israelensis.	0 %	1.7.2009-31.12.2013
ex38089190	50	Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol suspension	0 %	1.7.2009-31.12.2013
ex38111900	10	Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:4,9 % of 1,2,4-trimethyl-benzene,4,9 % of naphthalene, and0,5 % of 1,3,5-trimethyl-benzene.	0 %	1.7.2009-31.12.2013
ex38119000	10	Dinonylnaphthylsulphonic acid salt, in a mineral oil solution	0 %	1.7.2009-31.12.2013
ex38159090	77	Catalyst powder in an aqueous suspension containing by weight:1 % or more but not more than 3 % of palladium,0,25 % or more but not more than 3 % of lead,0,25 % or more but not more than 0,5 % of lead hydroxide,5,5 % or more but not more than 10 % of aluminium,4 % or more but not more than 10 % of magnesium,30 % or more but not more than 50 % of silicon dioxide.	0 %	1.7.2009-31.12.2013
ex38170050	10	Mixture of alkylbenzenes (C14-26) containing by weight:35 % or more but not more than 60 % of eicosylbenzene,25 % or more but not more than 50 % of docosylbenzene,5 % or more but not more than 25 % of tetracosylbenzene.	0 %	1.7.2009-31.12.2013
ex38170080	20	Mixture of branched alkyl benzenes mainly containing dodecyl benzenes	0 %	1.7.2009-31.12.2013
ex38249097	15	Structured silica alumina phosphate	0 %	1.7.2009-31.12.2013
ex38249097	16	Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea	0 %	1.7.2009-31.12.2013
ex38249097	17	Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %	0 %	1.7.2009-31.12.2013
ex39022000	10	Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800	0 %	1.7.2009-31.12.2013
ex39022000	20	Hydrogenated polyisobutene, in liquid form	0 %	1.7.2009-31.12.2013
ex39029090	55	Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene	0 %	1.7.2009-31.12.2013
ex39039090	40	Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6000	0 %	1.7.2009-31.12.2013
ex39119099	50		0 %	1.7.2009-31.12.2013
ex39046990	81	Poly(vinylidene fluoride) powder or in an aqueous suspension	0 %	1.7.2009-31.12.2013
ex39059990	96	Polymer of vinyl formal, in one of the forms mentioned in note 6(b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol.	0 %	1.7.2009-31.12.2013
ex39069090	25	Transparent liquid, insoluble in water, containing by weight:50 % or more, but not more than 51 % of poly(methyl metacrylate) copolymer,37 % or more, but not more than 39 % of xylene, and11 % or more, but not more than 13 % of n-butyl acetate.	0 %	1.7.2009-31.12.2013
ex39069090	30	Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6000	0 %	1.7.2009-31.12.2013
ex39069090	35	White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water	0 %	1.7.2009-31.12.2013
ex39069090	65	Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC)	0 %	1.7.2009-31.12.2013
ex39072011	10	Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more	0 %	1.7.2009-31.12.2013
ex39072011	20	Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40000	0 %	1.7.2009-31.12.2013
ex39072011	30	Bis[Methoxypoly[ethyleneglycol)], chemically modified with lysine, bis(maleimide) terminated, of a number average molecular weight (Mn) of 40000	0 %	1.7.2009-31.12.2013
ex39072021	20	Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100)	0 %	1.7.2009-31.12.2013
ex39072099	50	Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient	0 %	1.7.2009-31.12.2013
ex39072099	55	Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5000	0 %	1.7.2009-31.12.2013
ex39073000	50	Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:a zinc borate hydrate content of not more than 40 % by weight,a diantimony trioxide content of not more than 5 % by weight.	0 %	1.7.2009-31.12.2013
ex39089000	10	Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6(b) to Chapter 39	0 %	1.7.2009-31.12.2013
ex39111000	81	Non-hydrogenated Hydrocarbon Resin, obtained by polymerisation of C-5 to C-10 alkenes, cyclopentadiene and dicyclopentadiene, with a Gardner Colour of more than 10 for the pure product or with a Gardner Colour of more than 8 for the 50 % solution by volume in toluene (as determined by the ASTM method D6166)	0 %	1.7.2009-31.12.2013
ex39119019	10	Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4’-biphenylene)	0 %	1.7.2009-31.12.2013
ex39139000	85	Sterile sodium hyaluronate	0 %	1.7.2009-31.12.2013
ex39139000	92	Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100000 to 300000	0 %	1.7.2009-31.12.2013
ex39191061	94	Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic tape of a thickness of 5 μm or more, for the protection of the surface of silicon discs	0 %	1.7.2009-31.12.2013
ex39191069	92
ex39199061	93
ex39199069	93
ex39201089	25
ex39191069	96	Self-adhesive reflecting laminated sheet showing a regular pattern, consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms and whether or not containing an additional layer of polyester and adhesive with a final release sheet	0 %	1.7.2009-31.12.2013
ex39199069	98		0 %	1.7.2009-31.12.2013
ex39199031	45	Transparent poly(ethylene terephtalate) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side having an antistatic layer of ionic based organic compound choline and a printable dust-proof layer of modified long chain alkyl organic compound, having a total thickness without the liner of 54 μm or more but not more than 64 μm and a width of more than 1295 mm but not more than 1305 mm	0 %	1.7.2009-31.12.2013
ex39199061	51	Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm	0 %	1.7.2009-31.12.2013
ex39199061	55	Film of poly(vinyl chloride) with a thickness of 78 μm or more, covered on one side with an acrylic adhesive layer of a thickness of 8 μm or more and with a release sheet, with an adhesive strength of 1764 mN/25 mm or more, for use in the cutting of silicon	0 %	1.7.2009-31.12.2013
ex39206219	20	Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers	0 %	1.7.2009-31.12.2013
ex39206219	75	Transparent polyethylene terephthalate film, coated on both sides by thin layers of 7-80 nm each of organic substances on the basis of acryl, giving good adhesion property with surface tension of 37 Dyne/cm, with a light transmission of more than 93 %, a haze value of less than 1,3 %, a total thickness of 125 μm or 188 μm and a width of 850 mm or more, but not more than 1600 mm	0 %	1.7.2009-31.12.2013
ex39206219	77		0 %	1.7.2009-31.12.2013
ex39209100	95	Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2’-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser	0 %	1.7.2009-31.12.2013
ex39209928	40	Polymer film containing the following monomers:Poly (tetramethylene ether glycol),Bis (4-isocyanotocyclohexyl) methane,1,4-Butanediol or 1,3-Butanediol,with a thickness of 0,25 mm or more but not more than 5,0 mm,embossed with a regular pattern on one surface, andcovered with a release sheet.	0 %	1.7.2009-31.12.2013
ex39211900	93	Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment	0 %	1.7.2009-31.12.2013
ex39219055	20	Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or546,1 mm (± 2 mm) × 622,3 mm (± 2 mm).	0 %	1.7.2009-31.12.2013
ex56031310	10	Electrically non-conductive non-wovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical non-conductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material	0 %	1.7.2009-31.12.2013
ex56031410	10		0 %	1.7.2009-31.12.2013
70112000		Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes	0 %	1.7.2009-31.12.2013
ex70191910	30	Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate	0 %	1.7.2009-31.12.2013
ex73209010	91	Flat spiral spring of tempered steel, with:a thickness of 2,67 mm or more, but not more than 4,11 mm,a width of 12,57 mm or more, but not more than 16,01 mm,a torque of 18,05 Nm or more, but not more than 73,5 Nm,an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°,for use in the manufacture of tensioners for power transmission belts, for internal combustion engines	0 %	1.7.2009-31.12.2013
ex74101100	10	Copper foil of a thickness of not more than 0,15 mm, coated with resin, free of halogen, with:a decomposition temperature of 350 °C or more (measured according to ASTM D 3850), anda time to delamination at 260 °C of more than 40 minutes and at 288 °C of more than 5 minutes (measured according to IPC-TM-650).	0 %	1.7.2009-31.12.2013
ex74102100	60		0 %	1.7.2009-31.12.2013
ex74102100	40	Sheet or platesconsisting of at least a central layer of paper or one central sheet of any type of non-woven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, orconsisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm	0 %	1.7.2009-31.12.2013
ex74102100	50	Platesconsisting of at least one layer of fibreglass fabric impregnated with epoxide resin,covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, andwith a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650.	0 %	1.7.2009-31.12.2013
ex76042100	10	Profiles made of aluminium alloy conforming to EN standard AW-6063 T5	0 %	1.7.2009-31.12.2013
ex76042990	30	—anodised,
		—whether or not lacquered,
		—with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %),
		for use in the manufacture of goods of subheading 8302

ex81082000	30	Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm	0 %	1.7.2009-31.12.2013
ex85011099	80	DC stepping motor, with:an angle of step of 7,5° (± 0,5°),a pull-out torque at 25 °C of 25 mNm or more,a pull-out pulse rate of 1960 pps or more,a two-phase winding, anda rated voltage of 10,5 V or more, but not more than 16,0 V.	0 %	1.7.2009-31.12.2013
ex85044090	40	Static converters for use in the manufacture of single-phase electric motor controls with a power supply of not more than 3 kW	0 %	1.7.2009-31.12.2013
ex85198135	10	Unmounted or incomplete assembly, comprising at least one optical unit and DC motors and operational control circuit, with digital/analogue converter, for use in the manufacture of CD players, radio-broadcast receivers of a kind used in motor vehicles or navigational aid apparatus	0 %	1.7.2009-31.12.2013
ex85229080	83	Blu-ray optical pick up unit for the reproduction/recording of optical signals from/to DVD discs and the reproduction of optical signals from CD and Blu-ray disc comprising at least:three kinds of wavelength laser diodes,laser driver integrated circuit,photo detector integrated circuit,front monitor integrated circuit and an actuator,for use in the manufacture of products falling within heading No 8521	0 %	1.7.2009-31.12.2013
ex85229080	84	Blu-ray drive mechanism or unit, whether or not recordable, for the reproduction or recording of optical signals from or to Blu-ray and DVD disks and the reproduction of optical signals from CD disks, comprising at least:an optical pick up unit with three kinds of laser,spindle motor,stepping motor,with or without printed circuit board mounted drive control integrated circuit, motor driver integrated circuit and memory,for use in the manufacture of products falling within heading No 8521	0 %	1.7.2009-31.12.2013
ex85258019	30	Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, whether or not contained in a housing, of dimensions of not more than 50 mm × 60 mm × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels of not more than 440000, for use in CCTV surveillance systems	0 %	1.7.2009-31.12.2013
ex85409100	40	Deflection yoke of cathode-ray tubes	0 %	1.7.2009-31.12.2013
ex85409100	50	Metal anode button to enable electrical contact with the anode inside the colour picture tube	0 %	1.7.2009-31.12.2013
ex85437090	90	Fuel cell module containing at least polymer electrolyte membrane fuel cells in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems	0 %	1.7.2009-31.12.2013
ex85444290	10	Data transmission cable capable of bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (± 0,25 V),connectors fitted at each end, at least one of which contains pins with a pitch of 0,5 mm,outer screening shielding,twisted pair copper wires with an impedance of 100 Ω and a twist pitch of not more than 8 mm,used solely for communication between LCD panel and video processing electronic circuits	0 %	1.7.2009-31.12.2013
ex85444993	20	PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of 0,05 mm (± 0,01 mm) and a width of not more than 0,65 mm (± 0,03 mm),distance between conductors of not more than 0,5 mm, andpitch (distance from centreline to centreline of conductors) of not more than 1,08 mm.	0 %	1.7.2009-31.12.2013
ex90012000	20	Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut	0 %	1.7.2009-31.12.2013
ex90019000	55		0 %	1.7.2009-31.12.2013
ex90019000	60	Reflector or diffuser sheets in rolls	0 %	1.1.2009-31.12.2013
ex90132000	10	Carbon dioxide laser, stimulated by high frequency, having an output power of 12 Watt or more, but not more than 200 Watt	0 %	1.7.2009-31.12.2013
ex90132000	20	Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices	0 %	1.7.2009-31.12.2013
ex90132000	30	Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices	0 %	1.7.2009-31.12.2013
ex90229090	10	Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, with an active surface of 409,6 mm2 × 409,6 mm2 and a pixel size of 200 μm2 × 200 μm2	0 %	1.7.2009-31.12.2013
ex94054039	10	Ambient light module with a length of 300 mm or more, but not more than 600 mm, based on a light engine of a series of three or more, but not more than nine specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set	0 %	1.7.2009-31.12.2013
ex94054039	20	LED array of white silicone, containing:an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, anda flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor.	0 %	1.7.2009-31.12.2013

ANNEX II

Products referred to in Article 1(2)Amended position.

CN code	TARIC
ex03042961	10
ex03049999	31
ex15119019	10
ex15119091	10
ex15131110	10
ex15131930	10
ex15132110	10
ex15132930	10
ex29215119	20
ex38089190	30
ex38159090	77
ex38170050	10
ex39022000	10
ex39029090	97
ex39039090	40
ex39119099	50
ex39039090	85
ex39059990	96
ex39069090	30
ex39072011	10
ex39072011	20
ex39072011	30
ex39072021	20
ex39073000	50
ex39111000	81
ex39139000	92
ex39139000	98
ex39191061	94
ex39191069	92
ex39199061	93
ex39199069	93
ex39199031	45
ex39199061	51
ex39209928	40
ex39219055	20
ex70112000	20
ex70112000	50
ex74091900	20
ex74102100	50
ex74102100	40
ex74102100	70
ex76061291	20
ex76061293	20
ex85198135	10
ex85229080	83
ex85229080	84
ex85258019	30
ex85437090	90
ex90019000	60

Amendments and corrections
December 31, 2011	Repealed by 32011R1344
July 1, 2009	Application - See Art 2
June 30, 2009	Entry into force - Date pub. See Art 2
January 1, 2009	Partial application - See Art 2

Council Regulation (EC) No 564/2009 of 25 June 2009 amending Regulation (EC) No 1255/96 temporarily suspending the autonomous common customs tariff duties on certain industrial, agricultural and fishery products