| CN code | TARIC | Description | Rate of autonomous duty | Validity period |
|---|
| ex15119019 | 10 | Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: | 0 % | 1.7.2009-31.12.2013 |
| ex15119091 | 10 | —industrial monocarboxylic fatty acids of subheading 3823 19 10, |
| ex15131110 | 10 | —methyl esters of fatty acids of heading 2915 or 2916, |
| ex15131930 | 10 | —fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products, |
| ex15132110 | 10 | —fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, |
| ex15132930 | 10 | —stearic acid of subheading 3823 11 00, or |
| —goods of heading No 3401 |
|
| ex15180099 | 10 | Jojoba oil, hydrogenated and texturised | 0 % | 1.7.2009-31.12.2013 |
| ex28045090 | 10 | Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % by weight | 0 % | 1.7.2009-31.12.2013 |
| ex28273985 | 30 | Manganese dichloride | 0 % | 1.7.2009-31.12.2013 |
| ex29033990 | 75 | Trans-1,3,3,3-tetrafluoroprop-1-ene | 0 % | 1.7.2009-31.12.2013 |
| ex29036990 | 50 | Fluorobenzene | 0 % | 1.7.2009-31.12.2013 |
| ex29036990 | 60 | α-Chloro(ethyl)toluenes | 0 % | 1.7.2009-31.12.2013 |
| ex29049040 | 10 | Trichloronitromethane, for the manufacture of goods of subheading 3808 92 | 0 % | 1.7.2009-31.12.2013 |
| ex29091990 | 60 | 1-Methoxyheptafluoropropane | 0 % | 1.7.2009-31.12.2013 |
| ex29211985 | 60 | Tetrakis(ethylmethylamino) zirconium (IV) | 0 % | 1.7.2009-31.12.2013 |
| ex29215119 | 20 | Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight | 0 % | 1.7.2009-31.12.2013 |
| ex29222900 | 46 | p-Anisidine-3-sulphonic acid | 0 % | 1.7.2009-31.12.2013 |
| ex29269095 | 35 | 2-Bromo-2(bromomethyl)pentanedinitrile | 0 % | 1.7.2009-31.12.2013 |
| ex29280090 | 70 | Butanone oxime | 0 % | 1.7.2009-31.12.2013 |
| ex29310095 | 20 | Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl | 0 % | 1.7.2009-31.12.2013 |
| ex29321300 | 10 | Tetrahydrofurfuryl alcohol | 0 % | 1.7.2009-31.12.2013 |
| ex29321900 | 40 | Furan of a purity by weight of 99 % or more | 0 % | 1.7.2009-31.12.2013 |
| ex29321900 | 41 | 2,2 di(tetrahydrofuryl)propane | 0 % | 1.7.2009-31.12.2013 |
| ex29329900 | 35 | 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol | 0 % | 1.7.2009-31.12.2013 |
| ex29334910 | 20 | 3-Hydroxy-2-methylquinoline-4-carboxylic acid | 0 % | 1.7.2009-31.12.2013 |
| ex29337900 | 50 | 6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione | 0 % | 1.7.2009-31.12.2013 |
| ex29349990 | 66 | Tetrahydrothiophene-1,1-dioxide | 0 % | 1.7.2009-31.12.2013 |
| ex32074080 | 20 | Glass flakes coated with silver, of an average diameter of 40 (± 10) μm | 0 % | 1.7.2009-31.12.2013 |
| ex32082010 | 20 | Immersion topcoat solution containing by weight 2 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate-copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether | 0 % | 1.7.2009-31.12.2013 |
| ex32089019 | 50 | Solution containing by weight:- (65 ± 10) % of γ-butyrolactone,
- (30 ± 10) % of polyamide resin,
- (3,5 ± 1,5) % of naphthoquinone ester derivative, and
- (1,5 ± 0,5) % of arylsilicic acid.
| 0 % | 1.7.2009-31.12.2013 |
| ex32159080 | 30 | Ink, containing by weight 5 % or more, but not more than 10 % of amorphous silicon dioxide, filled into disposable cartridges, for use in the marking of integrated circuits | 0 % | 1.7.2009-31.12.2013 |
| ex38089190 | 30 | Preparation containing endospores or spores and protein crystals derived from either:- Bacillus thuringiensis Berliner subsp. aizawai and kurstaki, or
- Bacillus thuringiensis subsp. kurstaki, or
- Bacillus thuringiensis subsp. israelensis.
| 0 % | 1.7.2009-31.12.2013 |
| ex38089190 | 50 | Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol suspension | 0 % | 1.7.2009-31.12.2013 |
| ex38111900 | 10 | Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:- 4,9 % of 1,2,4-trimethyl-benzene,
- 4,9 % of naphthalene, and
- 0,5 % of 1,3,5-trimethyl-benzene.
| 0 % | 1.7.2009-31.12.2013 |
| ex38119000 | 10 | Dinonylnaphthylsulphonic acid salt, in a mineral oil solution | 0 % | 1.7.2009-31.12.2013 |
| ex38159090 | 77 | Catalyst powder in an aqueous suspension containing by weight:- 1 % or more but not more than 3 % of palladium,
- 0,25 % or more but not more than 3 % of lead,
- 0,25 % or more but not more than 0,5 % of lead hydroxide,
- 5,5 % or more but not more than 10 % of aluminium,
- 4 % or more but not more than 10 % of magnesium,
- 30 % or more but not more than 50 % of silicon dioxide.
| 0 % | 1.7.2009-31.12.2013 |
| ex38170050 | 10 | Mixture of alkylbenzenes (C14-26) containing by weight:- 35 % or more but not more than 60 % of eicosylbenzene,
- 25 % or more but not more than 50 % of docosylbenzene,
- 5 % or more but not more than 25 % of tetracosylbenzene.
| 0 % | 1.7.2009-31.12.2013 |
| ex38170080 | 20 | Mixture of branched alkyl benzenes mainly containing dodecyl benzenes | 0 % | 1.7.2009-31.12.2013 |
| ex38249097 | 15 | Structured silica alumina phosphate | 0 % | 1.7.2009-31.12.2013 |
| ex38249097 | 16 | Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea | 0 % | 1.7.2009-31.12.2013 |
| ex38249097 | 17 | Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 % | 0 % | 1.7.2009-31.12.2013 |
| ex39022000 | 10 | Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800 | 0 % | 1.7.2009-31.12.2013 |
| ex39022000 | 20 | Hydrogenated polyisobutene, in liquid form | 0 % | 1.7.2009-31.12.2013 |
| ex39029090 | 55 | Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene | 0 % | 1.7.2009-31.12.2013 |
| ex39039090 | 40 | Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6000 | 0 % | 1.7.2009-31.12.2013 |
| ex39119099 | 50 |
| ex39046990 | 81 | Poly(vinylidene fluoride) powder or in an aqueous suspension | 0 % | 1.7.2009-31.12.2013 |
| ex39059990 | 96 | Polymer of vinyl formal, in one of the forms mentioned in note 6(b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:- 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and
- 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol.
| 0 % | 1.7.2009-31.12.2013 |
| ex39069090 | 25 | Transparent liquid, insoluble in water, containing by weight:- 50 % or more, but not more than 51 % of poly(methyl metacrylate) copolymer,
- 37 % or more, but not more than 39 % of xylene, and
- 11 % or more, but not more than 13 % of n-butyl acetate.
| 0 % | 1.7.2009-31.12.2013 |
| ex39069090 | 30 | Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6000 | 0 % | 1.7.2009-31.12.2013 |
| ex39069090 | 35 | White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water | 0 % | 1.7.2009-31.12.2013 |
| ex39069090 | 65 | Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC) | 0 % | 1.7.2009-31.12.2013 |
| ex39072011 | 10 | Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more | 0 % | 1.7.2009-31.12.2013 |
| ex39072011 | 20 | Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40000 | 0 % | 1.7.2009-31.12.2013 |
| ex39072011 | 30 | Bis[Methoxypoly[ethyleneglycol)], chemically modified with lysine, bis(maleimide) terminated, of a number average molecular weight (Mn) of 40000 | 0 % | 1.7.2009-31.12.2013 |
| ex39072021 | 20 | Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100) | 0 % | 1.7.2009-31.12.2013 |
| ex39072099 | 50 | Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient | 0 % | 1.7.2009-31.12.2013 |
| ex39072099 | 55 | Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5000 | 0 % | 1.7.2009-31.12.2013 |
| ex39073000 | 50 | Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:- a zinc borate hydrate content of not more than 40 % by weight,
- a diantimony trioxide content of not more than 5 % by weight.
| 0 % | 1.7.2009-31.12.2013 |
| ex39089000 | 10 | Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6(b) to Chapter 39 | 0 % | 1.7.2009-31.12.2013 |
| ex39111000 | 81 | Non-hydrogenated Hydrocarbon Resin, obtained by polymerisation of C-5 to C-10 alkenes, cyclopentadiene and dicyclopentadiene, with a Gardner Colour of more than 10 for the pure product or with a Gardner Colour of more than 8 for the 50 % solution by volume in toluene (as determined by the ASTM method D6166) | 0 % | 1.7.2009-31.12.2013 |
| ex39119019 | 10 | Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4’-biphenylene) | 0 % | 1.7.2009-31.12.2013 |
| ex39139000 | 85 | Sterile sodium hyaluronate | 0 % | 1.7.2009-31.12.2013 |
| ex39139000 | 92 | Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100000 to 300000 | 0 % | 1.7.2009-31.12.2013 |
| ex39191061 | 94 | Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic tape of a thickness of 5 μm or more, for the protection of the surface of silicon discs | 0 % | 1.7.2009-31.12.2013 |
| ex39191069 | 92 |
| ex39199061 | 93 |
| ex39199069 | 93 |
| ex39201089 | 25 |
| ex39191069 | 96 | Self-adhesive reflecting laminated sheet showing a regular pattern, consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms and whether or not containing an additional layer of polyester and adhesive with a final release sheet | 0 % | 1.7.2009-31.12.2013 |
| ex39199069 | 98 |
| ex39199031 | 45 | Transparent poly(ethylene terephtalate) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side having an antistatic layer of ionic based organic compound choline and a printable dust-proof layer of modified long chain alkyl organic compound, having a total thickness without the liner of 54 μm or more but not more than 64 μm and a width of more than 1295 mm but not more than 1305 mm | 0 % | 1.7.2009-31.12.2013 |
| ex39199061 | 51 | Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm | 0 % | 1.7.2009-31.12.2013 |
| ex39199061 | 55 | Film of poly(vinyl chloride) with a thickness of 78 μm or more, covered on one side with an acrylic adhesive layer of a thickness of 8 μm or more and with a release sheet, with an adhesive strength of 1764 mN/25 mm or more, for use in the cutting of silicon | 0 % | 1.7.2009-31.12.2013 |
| ex39206219 | 20 | Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers | 0 % | 1.7.2009-31.12.2013 |
| ex39206219 | 75 | Transparent polyethylene terephthalate film, coated on both sides by thin layers of 7-80 nm each of organic substances on the basis of acryl, giving good adhesion property with surface tension of 37 Dyne/cm, with a light transmission of more than 93 %, a haze value of less than 1,3 %, a total thickness of 125 μm or 188 μm and a width of 850 mm or more, but not more than 1600 mm | 0 % | 1.7.2009-31.12.2013 |
| ex39206219 | 77 |
| ex39209100 | 95 | Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2’-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser | 0 % | 1.7.2009-31.12.2013 |
| ex39209928 | 40 | Polymer film containing the following monomers:- Poly (tetramethylene ether glycol),
- Bis (4-isocyanotocyclohexyl) methane,
- 1,4-Butanediol or 1,3-Butanediol,
- with a thickness of 0,25 mm or more but not more than 5,0 mm,
- embossed with a regular pattern on one surface, and
- covered with a release sheet.
| 0 % | 1.7.2009-31.12.2013 |
| ex39211900 | 93 | Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment | 0 % | 1.7.2009-31.12.2013 |
| ex39219055 | 20 | Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:- 469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or
- 469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or
- 546,1 mm (± 2 mm) × 622,3 mm (± 2 mm).
| 0 % | 1.7.2009-31.12.2013 |
| ex56031310 | 10 | Electrically non-conductive non-wovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical non-conductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material | 0 % | 1.7.2009-31.12.2013 |
| ex56031410 | 10 |
| 70112000 | | Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes | 0 % | 1.7.2009-31.12.2013 |
| ex70191910 | 30 | Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate | 0 % | 1.7.2009-31.12.2013 |
| ex73209010 | 91 | Flat spiral spring of tempered steel, with:- a thickness of 2,67 mm or more, but not more than 4,11 mm,
- a width of 12,57 mm or more, but not more than 16,01 mm,
- a torque of 18,05 Nm or more, but not more than 73,5 Nm,
- an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°,
for use in the manufacture of tensioners for power transmission belts, for internal combustion engines | 0 % | 1.7.2009-31.12.2013 |
| ex74101100 | 10 | Copper foil of a thickness of not more than 0,15 mm, coated with resin, free of halogen, with:- a decomposition temperature of 350 °C or more (measured according to ASTM D 3850), and
- a time to delamination at 260 °C of more than 40 minutes and at 288 °C of more than 5 minutes (measured according to IPC-TM-650).
| 0 % | 1.7.2009-31.12.2013 |
| ex74102100 | 60 |
| ex74102100 | 40 | Sheet or plates- consisting of at least a central layer of paper or one central sheet of any type of non-woven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or
- consisting of multiple layers of paper, impregnated with phenolic resin,
coated on one or both sides with a copper film with a maximum thickness of 0,15 mm | 0 % | 1.7.2009-31.12.2013 |
| ex74102100 | 50 | Plates- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and
- with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650.
| 0 % | 1.7.2009-31.12.2013 |
| ex76042100 | 10 | Profiles made of aluminium alloy conforming to EN standard AW-6063 T5 | 0 % | 1.7.2009-31.12.2013 |
| ex76042990 | 30 | —anodised, |
| —whether or not lacquered, |
| —with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %), |
| for use in the manufacture of goods of subheading 8302 |
|
| ex81082000 | 30 | Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm | 0 % | 1.7.2009-31.12.2013 |
| ex85011099 | 80 | DC stepping motor, with:- an angle of step of 7,5° (± 0,5°),
- a pull-out torque at 25 °C of 25 mNm or more,
- a pull-out pulse rate of 1960 pps or more,
- a two-phase winding, and
- a rated voltage of 10,5 V or more, but not more than 16,0 V.
| 0 % | 1.7.2009-31.12.2013 |
| ex85044090 | 40 | Static converters for use in the manufacture of single-phase electric motor controls with a power supply of not more than 3 kW | 0 % | 1.7.2009-31.12.2013 |
| ex85198135 | 10 | Unmounted or incomplete assembly, comprising at least one optical unit and DC motors and operational control circuit, with digital/analogue converter, for use in the manufacture of CD players, radio-broadcast receivers of a kind used in motor vehicles or navigational aid apparatus | 0 % | 1.7.2009-31.12.2013 |
| ex85229080 | 83 | Blu-ray optical pick up unit for the reproduction/recording of optical signals from/to DVD discs and the reproduction of optical signals from CD and Blu-ray disc comprising at least:- three kinds of wavelength laser diodes,
- laser driver integrated circuit,
- photo detector integrated circuit,
- front monitor integrated circuit and an actuator,
for use in the manufacture of products falling within heading No 8521 | 0 % | 1.7.2009-31.12.2013 |
| ex85229080 | 84 | Blu-ray drive mechanism or unit, whether or not recordable, for the reproduction or recording of optical signals from or to Blu-ray and DVD disks and the reproduction of optical signals from CD disks, comprising at least:- an optical pick up unit with three kinds of laser,
- spindle motor,
- stepping motor,
- with or without printed circuit board mounted drive control integrated circuit, motor driver integrated circuit and memory,
for use in the manufacture of products falling within heading No 8521 | 0 % | 1.7.2009-31.12.2013 |
| ex85258019 | 30 | Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, whether or not contained in a housing, of dimensions of not more than 50 mm × 60 mm × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels of not more than 440000, for use in CCTV surveillance systems | 0 % | 1.7.2009-31.12.2013 |
| ex85409100 | 40 | Deflection yoke of cathode-ray tubes | 0 % | 1.7.2009-31.12.2013 |
| ex85409100 | 50 | Metal anode button to enable electrical contact with the anode inside the colour picture tube | 0 % | 1.7.2009-31.12.2013 |
| ex85437090 | 90 | Fuel cell module containing at least polymer electrolyte membrane fuel cells in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems | 0 % | 1.7.2009-31.12.2013 |
| ex85444290 | 10 | Data transmission cable capable of bit rate transmission of 600 Mbit/s or more, with:- a voltage of 1,25 V (± 0,25 V),
- connectors fitted at each end, at least one of which contains pins with a pitch of 0,5 mm,
- outer screening shielding,
- twisted pair copper wires with an impedance of 100 Ω and a twist pitch of not more than 8 mm,
used solely for communication between LCD panel and video processing electronic circuits | 0 % | 1.7.2009-31.12.2013 |
| ex85444993 | 20 | PET/PVC insulated flexible cable with:- a voltage of not more than 60 V,
- a current of not more than 1 A,
- a heat resistance of not more than 105 °C,
- individual wires of a thickness of 0,05 mm (± 0,01 mm) and a width of not more than 0,65 mm (± 0,03 mm),
- distance between conductors of not more than 0,5 mm, and
- pitch (distance from centreline to centreline of conductors) of not more than 1,08 mm.
| 0 % | 1.7.2009-31.12.2013 |
| ex90012000 | 20 | Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut | 0 % | 1.7.2009-31.12.2013 |
| ex90019000 | 55 |
| ex90019000 | 60 | Reflector or diffuser sheets in rolls | 0 % | 1.1.2009-31.12.2013 |
| ex90132000 | 10 | Carbon dioxide laser, stimulated by high frequency, having an output power of 12 Watt or more, but not more than 200 Watt | 0 % | 1.7.2009-31.12.2013 |
| ex90132000 | 20 | Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices | 0 % | 1.7.2009-31.12.2013 |
| ex90132000 | 30 | Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices | 0 % | 1.7.2009-31.12.2013 |
| ex90229090 | 10 | Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, with an active surface of 409,6 mm2 × 409,6 mm2 and a pixel size of 200 μm2 × 200 μm2 | 0 % | 1.7.2009-31.12.2013 |
| ex94054039 | 10 | Ambient light module with a length of 300 mm or more, but not more than 600 mm, based on a light engine of a series of three or more, but not more than nine specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set | 0 % | 1.7.2009-31.12.2013 |
| ex94054039 | 20 | LED array of white silicone, containing:- an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, and
- a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor.
| 0 % | 1.7.2009-31.12.2013 |