Article 1Subject matterThis Regulation establishes an integrated pollutant release and transfer register at Community level (hereinafter "the European PRTR") in the form of a publicly accessible electronic database and lays down rules for its functioning, in order to implement the UNECE Protocol on Pollutant Release and Transfer Registers (hereinafter "the Protocol") and facilitate public participation in environmental decision-making, as well as contributing to the prevention and reduction of pollution of the environment.

Article 2DefinitionsFor the purposes of this Regulation the following definitions shall apply:(1)"the public" means one or more natural or legal persons, and, in accordance with national legislation or practice, their associations, organisations or groups;(2)"competent authority" means the national authority or authorities, or any other competent body or bodies, designated by the Member States;(3)"installation" means a stationary technical unit where one or more activities listed in Annex I are carried out, and any other directly associated activities which have a technical connection with the activities carried out on that site and which could have an effect on emissions and pollution;(4)"facility" means one or more installations on the same site that are operated by the same natural or legal person;(5)"site" means the geographical location of the facility;(6)"operator" means any natural or legal person who operates or controls the facility or, where this is provided for in national legislation, to whom decisive economic power over the technical functioning of the facility has been delegated;(7)"reporting year" means the calendar year for which data on releases of pollutants and off-site transfers must be gathered;(8)"substance" means any chemical element and its compounds, with the exception of radioactive substances;(9)"pollutant" means a substance or a group of substances that may be harmful to the environment or to human health on account of its properties and of its introduction into the environment;(10)"release" means any introduction of pollutants into the environment as a result of any human activity, whether deliberate or accidental, routine or non-routine, including spilling, emitting, discharging, injecting, disposing or dumping, or through sewer systems without final waste-water treatment;(11)"off-site transfer" means the movement beyond the boundaries of a facility of waste destined for recovery or disposal and of pollutants in waste water destined for waste-water treatment;(12)"diffuse sources" means the many smaller or scattered sources from which pollutants may be released to land, air or water, whose combined impact on those media may be significant and for which it is impractical to collect reports from each individual source;(13)"waste" means any substance or object as defined in Article 1(a) of Council Directive 75/442/EEC of 15 July 1975 on wasteOJ L 194, 25.7.1975, p. 39. Directive as last amended by Regulation (EC) No 1882/2003.;(14)"hazardous waste" means any substance or object as defined in Article 1(4) of Directive 91/689/EEC;(15)"waste water" means urban, domestic and industrial waste water, as defined in Article 2(1), (2) and (3) of Council Directive 91/271/EEC of 21 May 1991 concerning urban waste water treatmentOJ L 135, 30.5.1991, p. 40. Directive as last amended by Regulation (EC) No 1882/2003., and any other used water which is subject, because of the substances or objects it contains, to regulation by Community law;(16)"disposal" means any of the operations provided for in Annex IIA to Directive 75/442/EEC;(17)"recovery" means any of the operations provided for in Annex IIB to Directive 75/442/EEC.

Article 3Content of the European PRTRThe European PRTR shall include information on:(a)releases of pollutants referred to in Article 5(1)(a) that must be reported by the operators of the facilities carrying out the activities listed in Annex I;(b)off-site transfers of waste referred to in Article 5(1)(b) and of pollutants in waste water referred to in Article 5(1)(c), that must be reported by the operators of the facilities carrying out the activities listed in Annex I;(c)releases of pollutants from diffuse sources referred to in Article 8(1), where available.

Article 4Design and structure1.The Commission shall publish the European PRTR, presenting the data in both aggregated and non-aggregated forms, so that releases and transfers can be searched for and identified by:(a)facility, including the facility's parent company where applicable, and its geographical location, including the river basin;(b)activity;(c)occurrence at Member State or Community level;(d)pollutant or waste, as appropriate;(e)each environmental medium (air, water, land) into which the pollutant is released;(f)off-site transfers of waste and their destination, as appropriate;(g)off-site transfers of pollutants in waste water;(h)diffuse sources;(i)facility owner or operator.2.The European PRTR shall be designed for maximum ease of public access to allow the information, under normal operating conditions, to be continuously and readily accessible on the Internet and by other electronic means. Its design shall take into account the possibility of its future expansion and shall include all data reported for previous reporting years, up to at least the last ten previous reporting years.3.The European PRTR shall include links to the following:(a)the national PRTRs of Member States;(b)other relevant existing, publicly accessible databases on subject matters related to PRTRs, including national PRTRs of other Parties to the Protocol and, where feasible, those of other countries;(c)facilities' websites if they exist and links are volunteered by the facilities.

Article 5Reporting by operators1.The operator of each facility that undertakes one or more of the activities specified in Annex I above the applicable capacity thresholds specified therein shall report the amounts annually to its competent authority, along with an indication of whether the information is based on measurement, calculation or estimation, of the following:(a)releases to air, water and land of any pollutant specified in Annex II for which the applicable threshold value specified in Annex II is exceeded;(b)off-site transfers of hazardous waste exceeding 2 tonnes per year or of non hazardous waste exceeding 2000 tonnes per year, for any operations of recovery or disposal with the exception of the disposal operations of land treatment and deep injection referred to in Article 6, indicating with "R" or "D" respectively whether the waste is destined for recovery or disposal and, for transboundary movements of hazardous waste, the name and address of the recoverer or the disposer of the waste and the actual recovery or disposal site;(c)off-site transfers of any pollutant specified in Annex II in waste water destined for waste-water treatment for which the threshold value specified in Annex II, column 1b is exceeded.The operator of each facility that undertakes one or more of the activities specified in Annex I, above the applicable capacity thresholds specified therein, shall communicate, by electronic means, to its competent authority the information identifying the facility in accordance with the format referred to in Article 7(2) unless that information is already available to the competent authority.In the case of data indicated as being based on measurement or calculation the analytical method and/or the method of calculation shall be reported.The releases referred to in Annex II reported under point (a) of this paragraph shall include all releases from all sources included in Annex I at the site of the facility.2.The information referred to in paragraph 1 shall include information on releases and transfers resulting as totals of all deliberate, accidental, routine and non-routine activities.In providing this information operators shall specify, where available, any data that relate to accidental releases.3.The operator of each facility shall collect with appropriate frequency the information needed to determine which of the facility's releases and off-site transfers are subject to reporting requirements under paragraph 1.4.When preparing the report, the operator concerned shall use the best available information, which may include monitoring data, emission factors, mass balance equations, indirect monitoring or other calculations, engineering judgements and other methods in line with Article 9(1) and in accordance with internationally approved methodologies, where these are available.5.The operator of each facility concerned shall keep available for the competent authorities of the Member State the records of the data from which the reported information was derived for a period of five years, starting from the end of the reporting year concerned. These records shall also describe the methodology used for data gathering.

Article 6Releases to landWaste which is subject to "land treatment" or "deep injection" disposal operations, as specified in Annex IIA to Directive 75/442/EEC, shall be reported as a release to land only by the operator of the facility originating the waste.

Article 7Reporting by Member States1.The Member States shall determine, having regard to the requirements set out in paragraphs 2 and 3 of this Article, a date by which operators shall provide all the data referred to in Article 5(1) and (2) and the information referred to in Article 5(3), (4) and (5) to its competent authority.2.Member States shall provide all the data referred to in Article 5(1) and (2) to the Commission by electronic transfer in the format set out in Annex III and within the following time-limits:(a)for the first reporting year, within 18 months after the end of the reporting year;(b)for all reporting years thereafter, within 15 months after the end of the reporting year.The first reporting year shall be the year 2007.3.The Commission, assisted by the European Environment Agency, shall incorporate the information reported by the Member States into the European PRTR within the following time-limits:(a)for the first reporting year, within 21 months after the end of the reporting year;(b)for all reporting years thereafter, within 16 months after the end of the reporting year.

Article 8Releases from diffuse sources1.The Commission, assisted by the European Environment Agency, shall include in the European PRTR information on releases from diffuse sources where such information exists and has already been reported by the Member States.2.The information referred to in paragraph 1 shall be organised such as to allow users to search for and identify releases of pollutants from diffuse sources according to an adequate geographical disaggregation and shall include information on the type of methodology used to derive the information.3.Where ~~the Commission~~it determines that no data on the releases from diffuse sources exist, ~~measures~~the Commission is empowered to ~~initiate~~adopt delegated acts in accordance with Article 18a in order to supplement this Regulation by initiating reporting on releases of relevant pollutants from one or more diffuse sources ~~shall be taken~~ using, where appropriate, internationally approved methodologies.~~Those measures, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 19(3)~~.

Article 9Quality assurance and assessment1.The operator of each facility subject to the reporting requirements set out in Article 5 shall assure the quality of the information that they report.2.The competent authorities shall assess the quality of the data provided by the operators of the facilities referred to in paragraph 1, in particular as to their completeness, consistency and credibility.3.The Commission shall coordinate work on quality assurance and quality assessment in consultation with the Committee referred to in Article 19(1).4.The Commission may adopt guidelines for the monitoring and reporting of emissions in accordance with the procedure referred to in Article 19(2). These guidelines shall be in accordance with internationally approved methodologies, where appropriate, and shall be consistent with other Community legislation.

Article 10Access to information1.The Commission, assisted by the European Environment Agency, shall make the European PRTR publicly accessible by dissemination free of charge on the Internet in accordance with the timeframe set out in Article 7(3).2.Where the information contained in the European PRTR is not easily accessible to the public by direct electronic means, the Member State concerned and the Commission shall facilitate electronic access to the European PRTR in publicly accessible locations.

Article 11ConfidentialityWhenever information is considered confidential by a Member State in accordance with Article 4 of Directive 2003/4/EC of the European Parliament and of the CouncilDirective 2003/4/EC of the European Parliament and of the Council of 28 January 2003 on public access to environmental information and repealing Council Directive 90/313/EEC (OJ L 41, 14.2.2003, p. 26)., the report referred to in Article 7(2) of this Regulation for the reporting year concerned shall indicate separately for each facility which information cannot be made public and provide the reasons for this.

Article 12Public participation1.The Commission shall provide the public with early and effective opportunities to participate in the further development of the European PRTR, including capacity-building and the preparation of amendments to this Regulation.2.The public shall have the opportunity to submit any relevant comments, information, analyses or opinions within a reasonable timeframe.3.The Commission shall take due account of such input and shall inform the public about the outcome of the public participation.

Article 13Access to justiceAccess to justice in matters relating to public access to environmental information shall be ensured in accordance with Article 6 of Directive 2003/4/EC and, where the institutions of the Community are involved, in accordance with Articles 6, 7 and 8 of Regulation (EC) No 1049/2001 of the European Parliament and of the Council of 30 May 2001 regarding public access to European Parliament, Council and Commission documentsOJ L 145, 31.5.2001, p. 43..

Article 14Guidance document1.The Commission shall draw up a guidance document supporting the implementation of the European PRTR as soon as possible but no later than four months before the beginning of the first reporting year and in consultation with the Committee referred to in Article 19(1).2.The guidance document for implementation of the European PRTR shall address in particular details on the following:(a)reporting procedures;(b)the data to be reported;(c)quality assurance and assessment;(d)indication of type of withheld data and reasons why they were withheld in the case of confidential data;(e)reference to internationally approved release determination and analytical methods, sampling methodologies;(f)indication of parent companies;(g)coding of activities according to Annex I to this Regulation and to Directive 96/61/EC.

Article 15Awareness raisingThe Commission and the Member States shall promote awareness of the public of the European PRTR and shall ensure that assistance is provided in accessing the European PRTR and in understanding and using the information contained in it.

Article 16Additional information to be reported by the Member States1.Member States shall, in a single report based on the information from the last three reporting years to be delivered every three years together with the data provided in accordance with Article 7, inform the Commission on practice and measures taken regarding the following:(a)requirements according to Article 5;(b)quality assurance and assessment according to Article 9;(c)access to information according to Article 10(2);(d)awareness raising activities according to Article 15;(e)confidentiality of information according to Article 11;(f)penalties provided for according to Article 20 and experience with their application.2.To facilitate the reporting by Member States referred to in paragraph 1 the Commission shall submit a proposal for a questionnaire, which shall be adopted in accordance with the procedure referred to in Article 19(2).

Article 17Review by the Commission1.The Commission shall review the information provided by Member States according to Article 7 and after consultation with the Member States shall publish a report every three years based on the information from the last three reporting years available, six months after the presentation of this information on the Internet.2.This report shall be submitted to the European Parliament and the Council, together with an assessment of the operation of the European PRTR.

Article 18Amendments to the AnnexesThe Commission ~~shall~~is ~~make any necessary amendments~~empowered to ~~the~~adopt ~~annexes~~delegated acts in accordance with Article 18a to amend Annexes II and III for the following purposes:(a)~~the~~to ~~adaptation~~adapt ~~of Annexes II or III~~them to scientific or technical progress;(b)~~the~~to ~~adaptation~~adapt ~~of Annexes II and III~~them as a result of the adoption by the Meeting of the Parties to the Protocol of any amendment to the Annexes to the Protocol.

Article 18aExercise of the delegation1.~~Those~~The ~~measures, designed~~power to ~~amend~~adopt ~~non-essential~~delegated ~~elements~~acts ofis conferred on the Commission subject to the conditions laid down in this ~~Regulation,~~Article.2.The power to adopt delegated acts referred to in Article 8(3) and Article 18 shall be ~~adopted~~conferred on the Commission for a period of five years from 26 July 2019. The Commission shall draw up a report in respect of the delegation of power not later than nine months before the end of the five-year period. The delegation of power shall be tacitly extended for periods of an identical duration, unless the European Parliament or the Council opposes such extension not later than three months before the end of each period.3.The delegation of power referred to in Article 8(3) and Article 18 may be revoked at any time by the European Parliament or by the Council. A decision to revoke shall put an end to the delegation of the power specified in that decision. It shall take effect the day following the publication of the decision in the Official Journal of the European Union or at a later date specified therein. It shall not affect the validity of any delegated acts already in force.4.Before adopting a delegated act, the Commission shall consult experts designated by each Member State in accordance with the ~~regulatory~~principles ~~procedure~~laid ~~with~~down ~~scrutiny~~in ~~referred~~the Interinstitutional Agreement of 13 April 2016 on Better Law-MakingOJ L 123, 12.5.2016, p. 1..5.As soon as it adopts a delegated act, the Commission shall notify it simultaneously to inthe European Parliament and to the Council.6.A delegated act adopted pursuant to Article 198(3) and Article 18 shall enter into force only if no objection has been expressed either by the European Parliament or the Council within a period of two months of notification of that act to the European Parliament and the Council or if, before the expiry of that period, the European Parliament and the Council have both informed the Commission that they will not object. That period shall be extended by two months at the initiative of the European Parliament or of the Council.

Article 19Committee Procedure1.The Commission shall be assisted by a committee.2.Where reference is made to this paragraph, Articles 5 and 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.The period provided for in Article 5(6) of Decision 1999/468/EC shall be set at three months.3.Where reference is made to this paragraph, Article 5a(1) to (4) and Article 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.

Article 20Penalties1.Member States shall lay down the rules on penalties applicable to infringements of the provisions of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for must be effective, proportionate and dissuasive.2.The Member States shall notify those provisions to the Commission one year after entry into force of this Regulation at the latest and shall notify it without delay of any subsequent amendment affecting them.

Article 21Amendments to Directives 91/689/EEC and 96/61/EC1.Article 8(3) of Directive 91/689/EEC shall be deleted.2.Article 15(3) of Directive 96/61/EC shall be deleted.

Article 22Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX IActivities

An asterisk (*) indicates that no capacity threshold is applicable (all facilities are subject to reporting).OJ L 332, 28.12.2000, p. 91.OJ L 182, 16.7.1999, p. 1. Directive as amended by Regulation (EC) No 1882/2003.The capacity threshold shall be reviewed by 2010 at the latest in the light of the results of the first reporting cycle.

No	Activity	Capacity threshold
1.	Energy sector
(a)	Mineral oil and gas refineries	*
(b)	Installations for gasification and liquefaction	*
(c)	Thermal power stations and other combustion installations	With a heat input of 50 megawatts (MW)
(d)	Coke ovens	*
(e)	Coal rolling mills	With a capacity of 1 tonne per hour
(f)	Installations for the manufacture of coal products and solid smokeless fuel	*
2.	Production and processing of metals
(a)	Metal ore (including sulphide ore) roasting or sintering installations	*
(b)	Installations for the production of pig iron or steel (primary or secondary melting) including continuous casting	With a capacity of 2,5 tonnes per hour
(c)	Installations for the processing of ferrous metals:
	(i)Hot-rolling mills	With a capacity of 20 tonnes of crude steel per hour
	(ii)Smitheries with hammers	With an energy of 50 kilojoules per hammer, where the calorific power used exceeds 20 MW
	(iii)Application of protective fused metal coats	With an input of 2 tonnes of crude steel per hour
(d)	Ferrous metal foundries	With a production capacity of 20 tonnes per day
(e)	Installations:
	(i)For the production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes	*
	(ii)For the smelting, including the alloying, of non-ferrous metals, including recovered products (refining, foundry casting, etc.)	With a melting capacity of 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals
(f)	Installations for surface treatment of metals and plastic materials using an electrolytic or chemical process	Where the volume of the treatment vats equals 30 m3
3.	Mineral industry
(a)	Underground mining and related operations	*
(b)	Opencast mining and quarrying	Where the surface of the area effectively under extractive operation equals 25 hectares
(c)	Installations for the production of:
	(i)Cement clinker in rotary kilns	With a production capacity of 500 tonnes per day
	(ii)Lime in rotary kilns	With a production capacity of 50 tonnes per day
	(iii)Cement clinker or lime in other furnaces	With a production capacity of 50 tonnes per day
(d)	Installations for the production of asbestos and the manufacture of asbestos-based products	*
(e)	Installations for the manufacture of glass, including glass fibre	With a melting capacity of 20 tonnes per day
(f)	Installations for melting mineral substances, including the production of mineral fibres	With a melting capacity of 20 tonnes per day
(g)	Installations for the manufacture of ceramic products by firing, in particular roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain	With a production capacity of 75 tonnes per day, or with a kiln capacity of 4 m3 and with a setting density per kiln of 300 kg/m3
4.	Chemical industry
(a)	Chemical installations for the production on an industrial scale of basic organic chemicals, such as:(i)Simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic)(ii)Oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters, acetates, ethers, peroxides, epoxy resins(iii)Sulphurous hydrocarbons(iv)Nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates(v)Phosphorus-containing hydrocarbons(vi)Halogenic hydrocarbons(vii)Organometallic compounds(viii)Basic plastic materials (polymers, synthetic fibres and cellulose-based fibres)(ix)Synthetic rubbers(x)Dyes and pigments(xi)Surface-active agents and surfactants	*
(b)	Chemical installations for the production on an industrial scale of basic inorganic chemicals, such as:(i)Gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride(ii)Acids, such as chromic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid, oleum, sulphurous acids(iii)Bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide(iv)Salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate(v)Non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide	*
(c)	Chemical installations for the production on an industrial scale of phosphorous-, nitrogen- or potassium-based fertilisers (simple or compound fertilisers)	*
(d)	Chemical installations for the production on an industrial scale of basic plant health products and of biocides	*
(e)	Installations using a chemical or biological process for the production on an industrial scale of basic pharmaceutical products	*
(f)	Installations for the production on an industrial scale of explosives and pyrotechnic products	*
5.	Waste and wastewater management
(a)	Installations for the recovery or disposal of hazardous waste	Receiving 10 tonnes per day
(b)	Installations for the incineration of non-hazardous waste in the scope of Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of waste	With a capacity of 3 tonnes per hour
(c)	Installations for the disposal of non-hazardous waste	With a capacity of 50 tonnes per day
(d)	Landfills (excluding landfills of inert waste and landfills, which were definitely closed before 16.7.2001 or for which the after-care phase required by the competent authorities according to Article 13 of Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste has expired)	Receiving 10 tonnes per day or with a total capacity of 25000 tonnes
(e)	Installations for the disposal or recycling of animal carcasses and animal waste	With a treatment capacity of 10 tonnes per day
(f)	Urban waste-water treatment plants	With a capacity of 100000 population equivalents
(g)	Independently operated industrial waste-water treatment plants which serve one or more activities of this annex	With a capacity of 10000 m3 per day
6.	Paper and wood production and processing
(a)	Industrial plants for the production of pulp from timber or similar fibrous materials	*
(b)	Industrial plants for the production of paper and board and other primary wood products (such as chipboard, fibreboard and plywood)	With a production capacity of 20 tonnes per day
(c)	Industrial plants for the preservation of wood and wood products with chemicals	With a production capacity of 50 m3 per day
7.	Intensive livestock production and aquaculture
(a)	Installations for the intensive rearing of poultry or pigs	(i)With 40000 places for poultry(ii)With 2000 places for production pigs (over 30 kg)(iii)With 750 places for sows
(b)	Intensive aquaculture	With a production capacity of 1000 tonnes of fish or shellfish per year
8.	Animal and vegetable products from the food and beverage sector
(a)	Slaughterhouses	With a carcass production capacity of 50 tonnes per day
(b)	Treatment and processing intended for the production of food and beverage products from:
	(i)Animal raw materials (other than milk)	With a finished product production capacity of 75 tonnes per day
	(ii)Vegetable raw materials	With a finished product production capacity of 300 tonnes per day (average value on a quarterly basis)
(c)	Treatment and processing of milk	With a capacity to receive 200 tonnes of milk per day (average value on an annual basis)
9.	Other activities
(a)	Plants for the pre-treatment (operations such as washing, bleaching, mercerisation) or dyeing of fibres or textiles	With a treatment capacity of 10 tonnes per day
(b)	Plants for the tanning of hides and skins	With a treatment capacity of 12 tonnes of finished product per day
(c)	Installations for the surface treatment of substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating	With a consumption capacity of 150 kg per hour or 200 tonnes per year
(d)	Installations for the production of carbon (hard-burnt coal) or electro-graphite by means of incineration or graphitisation	*
(e)	Installations for the building of, and painting or removal of paint from ships	With a capacity for ships 100 m long

ANNEX IIPollutantsReleases of pollutants falling into several categories of pollutants shall be reported for each of these categories.

Unless otherwise specified any pollutant specified in Annex II shall be reported as the total mass of that pollutant or, where the pollutant is a group of substances, as the total mass of the group.A hyphen (—) indicates that the parameter and medium in question do not trigger a reporting requirement.Total mass of hydrogen fluorocarbons: sum of HFC23, HFC32, HFC41, HFC4310mee, HFC125, HFC134, HFC134a, HFC152a, HFC143, HFC143a, HFC227ea, HFC236fa, HFC245ca, HFC365mfc.Total mass of perfluorocarbons: sum of CF4, C2F6, C3F8, C4F10, c-C4F8, C5F12, C6F14.Total mass of substances including their isomers listed in Group VIII of Annex I to Regulation (EC) No 2037/2000 of the European Parliament and of the Council of 29 June 2000 on substances that deplete the ozone layer (OJ L 244, 29.9.2000, p. 1). Regulation as amended by Regulation (EC) No 1804/2003 (OJ L 265, 16.10.2003, p. 1).Total mass of substances including their isomers listed in Group I and II of Annex I to Regulation (EC) No 2037/2000.Total mass of substances including their isomers listed in Group III and VI of Annex I to Regulation (EC) No 2037/2000.All metals shall be reported as the total mass of the element in all chemical forms present in the release.Halogenated organic compounds which can be adsorbed to activated carbon expressed as chloride.Expressed as I-TEQ.Single pollutants are to be reported if the threshold for BTEX (the sum parameter of benzene, toluene, ethyl benzene, xylenes) is exceeded.Total mass of the following brominated diphenylethers: penta-BDE, octa-BDE and deca-BDE.Total mass of phenol and simple substituted phenols expressed as total carbon.Polycyclic aromatic hydrocarbons (PAHs) are to be measured for reporting of releases to air as benzo(a)pyrene (50-32-8), benzo(b)fluoranthene (205-99-2), benzo(k)fluoranthene (207-08-9), indeno(1,2,3-cd)pyrene (193-39-5) (derived from Regulation (EC) No 850/2004 of the European Parliament and of the Council of 29 April 2004 on persistent organic pollutants (OJ L 229, 29.6.2004, p. 5)).Total mass of tributyltin compounds, expressed as mass of tributyltin.Total mass of triphenyltin compounds, expressed as mass of triphenyltin.Total mass of xylene (ortho-xylene, meta-xylene, para-xylene).

No	CAS number	Pollutant	Threshold for releases(column 1)
No	CAS number	Pollutant	to air(column 1a)kg/year	to water(column 1b)kg/year	to land(column 1c)kg/year
1	74-82-8	Methane (CH4)	100000	—	—
2	630-08-0	Carbon monoxide (CO)	500000	—	—
3	124-38-9	Carbon dioxide (CO2)	100 million	—	—
4		Hydro-fluorocarbons (HFCs)	100	—	—
5	10024-97-2	Nitrous oxide (N2O)	10000	—	—
6	7664-41-7	Ammonia (NH3)	10000	—	—
7		Non-methane volatile organic compounds (NMVOC)	100000	—	—
8		Nitrogen oxides (NOx/NO2)	100000	—	—
9		Perfluorocarbons (PFCs)	100	—	—
10	2551-62-4	Sulphur hexafluoride (SF6)	50	—	—
11		Sulphur oxides (SOx/SO2)	150000	—	—
12		Total nitrogen	—	50000	50000
13		Total phosphorus	—	5000	5000
14		Hydrochlorofluorocarbons (HCFCs)	1	—	—
15		Chlorofluorocarbons (CFCs)	1	—	—
16		Halons	1	—	—
17		Arsenic and compounds (as As)	20	5	5
18		Cadmium and compounds (as Cd)	10	5	5
19		Chromium and compounds (as Cr)	100	50	50
20		Copper and compounds (as Cu)	100	50	50
21		Mercury and compounds (as Hg)	10	1	1
22		Nickel and compounds (as Ni)	50	20	20
23		Lead and compounds (as Pb)	200	20	20
24		Zinc and compounds (as Zn)	200	100	100
25	15972-60-8	Alachlor	—	1	1
26	309-00-2	Aldrin	1	1	1
27	1912-24-9	Atrazine	—	1	1
28	57-74-9	Chlordane	1	1	1
29	143-50-0	Chlordecone	1	1	1
30	470-90-6	Chlorfenvinphos	—	1	1
31	85535-84-8	Chloro-alkanes, C10-C13	—	1	1
32	2921-88-2	Chlorpyrifos	—	1	1
33	50-29-3	DDT	1	1	1
34	107-06-2	1,2-dichloroethane (EDC)	1000	10	10
35	75-09-2	Dichloromethane (DCM)	1000	10	10
36	60-57-1	Dieldrin	1	1	1
37	330-54-1	Diuron	—	1	1
38	115-29-7	Endosulphan	—	1	1
39	72-20-8	Endrin	1	1	1
40		Halogenated organic compounds (as AOX)	—	1000	1000
41	76-44-8	Heptachlor	1	1	1
42	118-74-1	Hexachlorobenzene (HCB)	10	1	1
43	87-68-3	Hexachlorobutadiene (HCBD)	—	1	1
44	608-73-1	1,2,3,4,5,6-hexachlorocyclohexane(HCH)	10	1	1
45	58-89-9	Lindane	1	1	1
46	2385-85-5	Mirex	1	1	1
47		PCDD + PCDF (dioxins + furans) (as Teq)	0,0001	0,0001	0,0001
48	608-93-5	Pentachlorobenzene	1	1	1
49	87-86-5	Pentachlorophenol (PCP)	10	1	1
50	1336-36-3	Polychlorinated biphenyls (PCBs)	0,1	0,1	0,1
51	122-34-9	Simazine	—	1	1
52	127-18-4	Tetrachloroethylene (PER)	2000	10	—
53	56-23-5	Tetrachloromethane (TCM)	100	1	—
54	12002-48-1	Trichlorobenzenes (TCBs) (all isomers)	10	1	—
55	71-55-6	1,1,1-trichloroethane	100	—	—
56	79-34-5	1,1,2,2-tetrachloroethane	50	—	—
57	79-01-6	Trichloroethylene	2000	10	—
58	67-66-3	Trichloromethane	500	10	—
59	8001-35-2	Toxaphene	1	1	1
60	75-01-4	Vinyl chloride	1000	10	10
61	120-12-7	Anthracene	50	1	1
62	71-43-2	Benzene	1000	200(as BTEX)	200(as BTEX)
63		Brominated diphenylethers (PBDE)	—	1	1
64		Nonylphenol and Nonylphenol ethoxylates (NP/NPEs)	—	1	1
65	100-41-4	Ethyl benzene	—	200(as BTEX)	200(as BTEX)
66	75-21-8	Ethylene oxide	1000	10	10
67	34123-59-6	Isoproturon	—	1	1
68	91-20-3	Naphthalene	100	10	10
69		Organotin compounds(as total Sn)	—	50	50
70	117-81-7	Di-(2-ethyl hexyl) phthalate (DEHP)	10	1	1
71	108-95-2	Phenols (as total C)	—	20	20
72		Polycyclic aromatic hydrocarbons (PAHs)	50	5	5
73	108-88-3	Toluene	—	200(as BTEX)	200(as BTEX)
74		Tributyltin and compounds	—	1	1
75		Triphenyltin and compounds	—	1	1
76		Total organic carbon (TOC) (as total C or COD/3)	—	50000	—
77	1582-09-8	Trifluralin	—	1	1
78	1330-20-7	Xylenes	—	200(as BTEX)	200(as BTEX)
79		Chlorides (as total Cl)	—	2 million	2 million
80		Chlorine and inorganic compounds (as HCl)	10000	—	—
81	1332-21-4	Asbestos	1	1	1
82		Cyanides (as total CN)	—	50	50
83		Fluorides (as total F)	—	2000	2000
84		Fluorine and inorganic compounds (as HF)	5000	—	—
85	74-90-8	Hydrogen cyanide (HCN)	200	—	—
86		Particulate matter (PM10)	50000	—	—
87	1806-26-4	Octylphenols and Octylphenol ethoxylates	—	1	—
88	206-44-0	Fluoranthene	—	1	—
89	465-73-6	Isodrin	—	1	—
90	36355-1-8	Hexabromobiphenyl	0,1	0,1	0,1
91	191-24-2	Benzo(g,h,i)perylene		1

ANNEX IIIFormat for the reporting of release and transfer data by Member States to the Commission

According to Article 3(1) of Directive 2000/60/EC of the European Parliament and of the Council of 23 October 2000 establishing a framework for Community action in the field of water policy (OJ L 327, 22.12.2000, p. 1). Directive as amended by Decision No 2455/2001/EC (OJ L 331, 15.12.2001, p. 1).

Reference year
Identification of the facility
Name of the parent companyName of the facilityIdentification number of facilityStreet addressTown/villagePostal codeCountryCoordinates of the locationRiver basin districtNACE-code (4 digits)Main economic activityProduction volume (optional)Number of installations (optional)Number of operating hours in year (optional)Number of employees (optional)Text field for textual information or website address delivered by facility or parent company (optional)
All Annex I activities of the facility (according to the coding system given in Annex I and the IPPC code where available)
Activity 1 (main Annex I activity)Activity 2Activity N
Release data to air for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to air
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	T: Totalin kg/yearA: accidentalin kg/year
Release data to water for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to water
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	T: Totalin kg/yearA: accidentalin kg/year
Release data to land for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to land
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	T: Totalin kg/yearA: accidentalin kg/year
Off-site transfer of each pollutant destined for waste-water treatment in quantities exceeding threshold value (according to Annex II)
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in kg/year
Off-site transfers of hazardous waste for the facility exceeding threshold value (according to Article 5)
Within the country:For Recovery (R)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
Within the country:For Disposal (D)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
To other countries:For Recovery (R)Name of the recovererAddress of the recovererAddress of actual recovery site receiving the transfer	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
To other countries:For Disposal (D)Name of the disposerAddress of the disposerAddress of actual disposal site receiving the transfer	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
Off-site transfer of non-hazardous waste for the facility exceeding threshold value (according to Article 5)
For Recovery (R)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
For Disposal (D)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
Competent authority for requests of the public:NameStreet addressTown/villageTelephone NoFax NoE-mail address

Article 21Amendments to Directives 91/689/EEC and 96/61/EC1.Article 8(3) of Directive 91/689/EEC shall be deleted.2.Article 15(3) of Directive 96/61/EC shall be deleted.

Article 22Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX IActivities

No	Activity	Capacity threshold
1.	Energy sector
(a)	Mineral oil and gas refineries	*
(b)	Installations for gasification and liquefaction	*
(c)	Thermal power stations and other combustion installations	With a heat input of 50 megawatts (MW)
(d)	Coke ovens	*
(e)	Coal rolling mills	With a capacity of 1 tonne per hour
(f)	Installations for the manufacture of coal products and solid smokeless fuel	*
2.	Production and processing of metals
(a)	Metal ore (including sulphide ore) roasting or sintering installations	*
(b)	Installations for the production of pig iron or steel (primary or secondary melting) including continuous casting	With a capacity of 2,5 tonnes per hour
(c)	Installations for the processing of ferrous metals:
	(i)Hot-rolling mills	With a capacity of 20 tonnes of crude steel per hour
	(ii)Smitheries with hammers	With an energy of 50 kilojoules per hammer, where the calorific power used exceeds 20 MW
	(iii)Application of protective fused metal coats	With an input of 2 tonnes of crude steel per hour
(d)	Ferrous metal foundries	With a production capacity of 20 tonnes per day
(e)	Installations:
	(i)For the production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes	*
	(ii)For the smelting, including the alloying, of non-ferrous metals, including recovered products (refining, foundry casting, etc.)	With a melting capacity of 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals
(f)	Installations for surface treatment of metals and plastic materials using an electrolytic or chemical process	Where the volume of the treatment vats equals 30 m3
3.	Mineral industry
(a)	Underground mining and related operations	*
(b)	Opencast mining and quarrying	Where the surface of the area effectively under extractive operation equals 25 hectares
(c)	Installations for the production of:
	(i)Cement clinker in rotary kilns	With a production capacity of 500 tonnes per day
	(ii)Lime in rotary kilns	With a production capacity of 50 tonnes per day
	(iii)Cement clinker or lime in other furnaces	With a production capacity of 50 tonnes per day
(d)	Installations for the production of asbestos and the manufacture of asbestos-based products	*
(e)	Installations for the manufacture of glass, including glass fibre	With a melting capacity of 20 tonnes per day
(f)	Installations for melting mineral substances, including the production of mineral fibres	With a melting capacity of 20 tonnes per day
(g)	Installations for the manufacture of ceramic products by firing, in particular roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain	With a production capacity of 75 tonnes per day, or with a kiln capacity of 4 m3 and with a setting density per kiln of 300 kg/m3
4.	Chemical industry
(a)	Chemical installations for the production on an industrial scale of basic organic chemicals, such as:(i)Simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic)(ii)Oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters, acetates, ethers, peroxides, epoxy resins(iii)Sulphurous hydrocarbons(iv)Nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates(v)Phosphorus-containing hydrocarbons(vi)Halogenic hydrocarbons(vii)Organometallic compounds(viii)Basic plastic materials (polymers, synthetic fibres and cellulose-based fibres)(ix)Synthetic rubbers(x)Dyes and pigments(xi)Surface-active agents and surfactants	*
(b)	Chemical installations for the production on an industrial scale of basic inorganic chemicals, such as:(i)Gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride(ii)Acids, such as chromic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid, oleum, sulphurous acids(iii)Bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide(iv)Salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate(v)Non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide	*
(c)	Chemical installations for the production on an industrial scale of phosphorous-, nitrogen- or potassium-based fertilisers (simple or compound fertilisers)	*
(d)	Chemical installations for the production on an industrial scale of basic plant health products and of biocides	*
(e)	Installations using a chemical or biological process for the production on an industrial scale of basic pharmaceutical products	*
(f)	Installations for the production on an industrial scale of explosives and pyrotechnic products	*
5.	Waste and wastewater management
(a)	Installations for the recovery or disposal of hazardous waste	Receiving 10 tonnes per day
(b)	Installations for the incineration of non-hazardous waste in the scope of Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of waste	With a capacity of 3 tonnes per hour
(c)	Installations for the disposal of non-hazardous waste	With a capacity of 50 tonnes per day
(d)	Landfills (excluding landfills of inert waste and landfills, which were definitely closed before 16.7.2001 or for which the after-care phase required by the competent authorities according to Article 13 of Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste has expired)	Receiving 10 tonnes per day or with a total capacity of 25000 tonnes
(e)	Installations for the disposal or recycling of animal carcasses and animal waste	With a treatment capacity of 10 tonnes per day
(f)	Urban waste-water treatment plants	With a capacity of 100000 population equivalents
(g)	Independently operated industrial waste-water treatment plants which serve one or more activities of this annex	With a capacity of 10000 m3 per day
6.	Paper and wood production and processing
(a)	Industrial plants for the production of pulp from timber or similar fibrous materials	*
(b)	Industrial plants for the production of paper and board and other primary wood products (such as chipboard, fibreboard and plywood)	With a production capacity of 20 tonnes per day
(c)	Industrial plants for the preservation of wood and wood products with chemicals	With a production capacity of 50 m3 per day
7.	Intensive livestock production and aquaculture
(a)	Installations for the intensive rearing of poultry or pigs	(i)With 40000 places for poultry(ii)With 2000 places for production pigs (over 30 kg)(iii)With 750 places for sows
(b)	Intensive aquaculture	With a production capacity of 1000 tonnes of fish or shellfish per year
8.	Animal and vegetable products from the food and beverage sector
(a)	Slaughterhouses	With a carcass production capacity of 50 tonnes per day
(b)	Treatment and processing intended for the production of food and beverage products from:
	(i)Animal raw materials (other than milk)	With a finished product production capacity of 75 tonnes per day
	(ii)Vegetable raw materials	With a finished product production capacity of 300 tonnes per day (average value on a quarterly basis)
(c)	Treatment and processing of milk	With a capacity to receive 200 tonnes of milk per day (average value on an annual basis)
9.	Other activities
(a)	Plants for the pre-treatment (operations such as washing, bleaching, mercerisation) or dyeing of fibres or textiles	With a treatment capacity of 10 tonnes per day
(b)	Plants for the tanning of hides and skins	With a treatment capacity of 12 tonnes of finished product per day
(c)	Installations for the surface treatment of substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating	With a consumption capacity of 150 kg per hour or 200 tonnes per year
(d)	Installations for the production of carbon (hard-burnt coal) or electro-graphite by means of incineration or graphitisation	*
(e)	Installations for the building of, and painting or removal of paint from ships	With a capacity for ships 100 m long

ANNEX IIPollutantsReleases of pollutants falling into several categories of pollutants shall be reported for each of these categories.

No	CAS number	Pollutant	Threshold for releases(column 1)
No	CAS number	Pollutant	to air(column 1a)kg/year	to water(column 1b)kg/year	to land(column 1c)kg/year
1	74-82-8	Methane (CH4)	100000	—	—
2	630-08-0	Carbon monoxide (CO)	500000	—	—
3	124-38-9	Carbon dioxide (CO2)	100 million	—	—
4		Hydro-fluorocarbons (HFCs)	100	—	—
5	10024-97-2	Nitrous oxide (N2O)	10000	—	—
6	7664-41-7	Ammonia (NH3)	10000	—	—
7		Non-methane volatile organic compounds (NMVOC)	100000	—	—
8		Nitrogen oxides (NOx/NO2)	100000	—	—
9		Perfluorocarbons (PFCs)	100	—	—
10	2551-62-4	Sulphur hexafluoride (SF6)	50	—	—
11		Sulphur oxides (SOx/SO2)	150000	—	—
12		Total nitrogen	—	50000	50000
13		Total phosphorus	—	5000	5000
14		Hydrochlorofluorocarbons (HCFCs)	1	—	—
15		Chlorofluorocarbons (CFCs)	1	—	—
16		Halons	1	—	—
17		Arsenic and compounds (as As)	20	5	5
18		Cadmium and compounds (as Cd)	10	5	5
19		Chromium and compounds (as Cr)	100	50	50
20		Copper and compounds (as Cu)	100	50	50
21		Mercury and compounds (as Hg)	10	1	1
22		Nickel and compounds (as Ni)	50	20	20
23		Lead and compounds (as Pb)	200	20	20
24		Zinc and compounds (as Zn)	200	100	100
25	15972-60-8	Alachlor	—	1	1
26	309-00-2	Aldrin	1	1	1
27	1912-24-9	Atrazine	—	1	1
28	57-74-9	Chlordane	1	1	1
29	143-50-0	Chlordecone	1	1	1
30	470-90-6	Chlorfenvinphos	—	1	1
31	85535-84-8	Chloro-alkanes, C10-C13	—	1	1
32	2921-88-2	Chlorpyrifos	—	1	1
33	50-29-3	DDT	1	1	1
34	107-06-2	1,2-dichloroethane (EDC)	1000	10	10
35	75-09-2	Dichloromethane (DCM)	1000	10	10
36	60-57-1	Dieldrin	1	1	1
37	330-54-1	Diuron	—	1	1
38	115-29-7	Endosulphan	—	1	1
39	72-20-8	Endrin	1	1	1
40		Halogenated organic compounds (as AOX)	—	1000	1000
41	76-44-8	Heptachlor	1	1	1
42	118-74-1	Hexachlorobenzene (HCB)	10	1	1
43	87-68-3	Hexachlorobutadiene (HCBD)	—	1	1
44	608-73-1	1,2,3,4,5,6-hexachlorocyclohexane(HCH)	10	1	1
45	58-89-9	Lindane	1	1	1
46	2385-85-5	Mirex	1	1	1
47		PCDD + PCDF (dioxins + furans) (as Teq)	0,0001	0,0001	0,0001
48	608-93-5	Pentachlorobenzene	1	1	1
49	87-86-5	Pentachlorophenol (PCP)	10	1	1
50	1336-36-3	Polychlorinated biphenyls (PCBs)	0,1	0,1	0,1
51	122-34-9	Simazine	—	1	1
52	127-18-4	Tetrachloroethylene (PER)	2000	10	—
53	56-23-5	Tetrachloromethane (TCM)	100	1	—
54	12002-48-1	Trichlorobenzenes (TCBs) (all isomers)	10	1	—
55	71-55-6	1,1,1-trichloroethane	100	—	—
56	79-34-5	1,1,2,2-tetrachloroethane	50	—	—
57	79-01-6	Trichloroethylene	2000	10	—
58	67-66-3	Trichloromethane	500	10	—
59	8001-35-2	Toxaphene	1	1	1
60	75-01-4	Vinyl chloride	1000	10	10
61	120-12-7	Anthracene	50	1	1
62	71-43-2	Benzene	1000	200(as BTEX)	200(as BTEX)
63		Brominated diphenylethers (PBDE)	—	1	1
64		Nonylphenol and Nonylphenol ethoxylates (NP/NPEs)	—	1	1
65	100-41-4	Ethyl benzene	—	200(as BTEX)	200(as BTEX)
66	75-21-8	Ethylene oxide	1000	10	10
67	34123-59-6	Isoproturon	—	1	1
68	91-20-3	Naphthalene	100	10	10
69		Organotin compounds(as total Sn)	—	50	50
70	117-81-7	Di-(2-ethyl hexyl) phthalate (DEHP)	10	1	1
71	108-95-2	Phenols (as total C)	—	20	20
72		Polycyclic aromatic hydrocarbons (PAHs)	50	5	5
73	108-88-3	Toluene	—	200(as BTEX)	200(as BTEX)
74		Tributyltin and compounds	—	1	1
75		Triphenyltin and compounds	—	1	1
76		Total organic carbon (TOC) (as total C or COD/3)	—	50000	—
77	1582-09-8	Trifluralin	—	1	1
78	1330-20-7	Xylenes	—	200(as BTEX)	200(as BTEX)
79		Chlorides (as total Cl)	—	2 million	2 million
80		Chlorine and inorganic compounds (as HCl)	10000	—	—
81	1332-21-4	Asbestos	1	1	1
82		Cyanides (as total CN)	—	50	50
83		Fluorides (as total F)	—	2000	2000
84		Fluorine and inorganic compounds (as HF)	5000	—	—
85	74-90-8	Hydrogen cyanide (HCN)	200	—	—
86		Particulate matter (PM10)	50000	—	—
87	1806-26-4	Octylphenols and Octylphenol ethoxylates	—	1	—
88	206-44-0	Fluoranthene	—	1	—
89	465-73-6	Isodrin	—	1	—
90	36355-1-8	Hexabromobiphenyl	0,1	0,1	0,1
91	191-24-2	Benzo(g,h,i)perylene		1

ANNEX IIIFormat for the reporting of release and transfer data by Member States to the Commission

Reference year
Identification of the facility
Name of the parent companyName of the facilityIdentification number of facilityStreet addressTown/villagePostal codeCountryCoordinates of the locationRiver basin districtNACE-code (4 digits)Main economic activityProduction volume (optional)Number of installations (optional)Number of operating hours in year (optional)Number of employees (optional)Text field for textual information or website address delivered by facility or parent company (optional)
All Annex I activities of the facility (according to the coding system given in Annex I and the IPPC code where available)
Activity 1 (main Annex I activity)Activity 2Activity N
Release data to air for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to air
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	T: Totalin kg/yearA: accidentalin kg/year
Release data to water for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to water
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	T: Totalin kg/yearA: accidentalin kg/year
Release data to land for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to land
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	T: Totalin kg/yearA: accidentalin kg/year
Off-site transfer of each pollutant destined for waste-water treatment in quantities exceeding threshold value (according to Annex II)
Pollutant 1Pollutant 2Pollutant N	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in kg/year
Off-site transfers of hazardous waste for the facility exceeding threshold value (according to Article 5)
Within the country:For Recovery (R)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
Within the country:For Disposal (D)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
To other countries:For Recovery (R)Name of the recovererAddress of the recovererAddress of actual recovery site receiving the transfer	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
To other countries:For Disposal (D)Name of the disposerAddress of the disposerAddress of actual disposal site receiving the transfer	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
Off-site transfer of non-hazardous waste for the facility exceeding threshold value (according to Article 5)
For Recovery (R)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
For Disposal (D)	M: measured; Analytical Method usedC: calculated; Calculation Method usedE: estimated	in tonnes/year
Competent authority for requests of the public:NameStreet addressTown/villageTelephone NoFax NoE-mail address

Regulation (EC) No 166/2006 of the European Parliament and of the Council of 18 January 2006 concerning the establishment of a European Pollutant Release and Transfer Register and amending Council Directives 91/689/EEC and 96/61/EC (Text with EEA relevance)