Article 1The Annex to Regulation (EC) No 1255/96 is hereby amended as follows:1.The products set out in Annex I to this Regulation shall be inserted.2.The products for which the codes are set out in Annex II to this Regulation shall be deleted.

Article 2This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply with effect from 1 July 2005.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 27 June 2005.For the CouncilThe PresidentL. LuxANNEX I

Entry under this subheading is subject to conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1)).

CN code	TARIC	Description
ex29034300	10	1,1,1-Trichlorotrifluoroethane
ex29034910	10	Chloro-1,1,1-trifluoroethane
ex29042000	50	2,2’-dinitro-bibenzyl
ex29062900	20	1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene
ex29072900	85	Phloroglucinol whether or not hydrated
ex29096000	10	Bis(α,α-dimethylbenzyl) peroxide
ex29153990	60	1-phenylethyl acetate
ex29163900	85	2,6-difluorobenzoic acid
ex29209010	40	Dimethyl carbonate
ex29209085	50	tri iso octyl phosphite
ex29214210	85	3,5-dichloroaniline
ex29215119	20	Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight
ex29241900	50	Acrylamide
ex29242995	91	3-hydroxy-2’-methoxy-2-naphthanilide
ex29242995	92	3-hydroxy-2-naphthanilide
ex29242995	93	3-hydroxy-2’-methyl-2-naphthanilide
ex29242995	94	2’-ethoxy-3-hydroxy-2-naphthanilide
ex29242995	96	4’-chloro-3-hydroxy-2’,5’-dimethoxy-2-naphthanilide
ex29269095	25	Aminoacetonitrile hydrochloride
ex29269095	35	2-Bromo-2(bromomethyl) pentanedinitrile
ex29329970	40	1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol
ex29329985	30	Carbofuran (ISO)
ex29331990	30	3-methyl-1-p. -tolyl-5-pyrazolone
ex29333999	40	2-chloropyridine
ex29335995	85	Adenine
ex29339990	88	2,6-dichloroquinoxaline
ex29350090	88	N-(2-(4-amino-N-ethyl-m-toluidino)ethyl)methanesulfonamide sesquisulfate monohydrate
ex32050000	10	Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry
ex32089019	85	Mixture containing by weight:30-45 % Polyamide resin;2-10 % Diazonaphthoquinone;50-65 % γ-Butyrolactone.
ex34021190	10	Surfactant mixture, of disodium salts of dodecyl (sulphophenoxy)benzenesulphonic acid and oxybis (dodecylbenzenesulphonic acid)
ex38119000	10	Dinonylnaphthylsulphonic acid salt, in the form of a solution in mineral oil, for use as an additive for distillate fuels and lubricating oils
ex38140090	40	Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether
ex38159090	88	Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:4 % or more but not more than 10 % of titanium and10 % or more but not more than 20 % magnesium
ex38159090	89	Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile
ex38249099	54	2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile
ex38249099	70	Preparation, in an aqueous solution, of tetramethylammonium hydroxide and a surfactant containing:2,38 % (+/-0,01) by weight of tetramethylammonium hydroxide,anda surfactant of 100 to 500 ppm.
ex38249099	80	Preparation containing by weight 81 % or more but not more than 89 % bis (3,4-epoxy-cyclohexylmethyl)-adipate
ex38249099	97	Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents
ex39046990	97	Copolymer of chlorotrifluoroethylene and vinylidene difluoride
ex39069090	55	Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets
ex39069090	85	Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends
ex39089000	40	Thermoplastic polyamide resin having a fire point of more than 750 °C, for use in the manufacture of deflection yokes of cathode ray tubes
ex39119099	75	Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220 μm or more but not exceeding 575 μm
ex39269099	75
ex39139000	98	Sodium hyaluronate
ex39191069	95	Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet
ex39199069	98
ex39199031	70	Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters
ex39202021	30	Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm.
ex39209100	93	Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account,for use in the manufacture of heat-reflecting or decorative laminated glass
ex39209959	60	Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not exceeding 90 μm, a tensile strength at break of 20 MPa or more but not exceeding 45 MPa and an elongation at break of 250 % or more but not exceeding 900 %
ex39219060	94	Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not exceeding 1,2 mm
ex39269099	15	Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems
ex39269099	25	Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 4,6 μm
ex69091900	60	Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume not exceeding 65 liters, having per cm2 of the surface of the cross section one or more closed channels at the tail end
ex70071920	10	Glass plate of a diagonal size of 81,28 cm (+/– 1,5 cm) or more, but not exceeding 185,42 cm (+/– 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP video monitors or television sets
ex70072900	10	Glass plate of a diagonal size of 81,28 cm (+/– 1,5cm) or more, but not exceeding 185,42 cm (+/– 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP video monitors or television sets
ex85011099	81	DC stepping motor, with an angle of step of 18° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 × 68 mm, a two phase winding and an output not exceeding 5 W
ex85011099	82	DC motor, brushless, with an external diameter not exceeding 29 mm, a rated speed of 1500 (± 15 %) or 6800 (± 15 %) rpm, a supply voltage of 2 or 8 V
ex85011099	83	Multiphase electric motor with D.C. current, without brush, of a normal power drive of 31 W (+/– 5 W) calculated with 600 rpm (revolution per minute), equipped with electronic circuit provided with sensors using Hall effect (electric power steering motor)
ex85051100	33	Neodymium-magnet discs with a diameter not exceeding 90 mm, whether or not containing a hole in the centre
ex85078094	30	Electric lithium-ion accumulator, with:a length of 35 mm or more, but not more than 45 mma width of 35 mm or more, but not more than 53 mma thickness of 3,5 mm or more, but not more than 7 mma mass of 15,5 g or more, but not more than 35 ga rated capacity of 600 mAh or more, but not more than 780 mAha nominal voltage of 3,7 Vfor use in the manufacture of mobile phones
ex85169000	33	Stainless steel soleplate with heating wire, for use in the manufacture of electric irons (1)
ex85169000	35	Steam iron, not capable of independent operation, for use in the manufacture of steam ironing systems
ex85229098	44	Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording
ex85229098	49	Magnetic head for playback of audio tapes, for use in the manufacture of products falling within heading 8 519
ex85299081	44	LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only
ex85371099	94	Unit consisting of two junction field effect transistors contained in a dual lead frame housing
ex85438995	66
ex85371099	95	Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual lead frame housing
ex85438995	65
ex85409100	32	Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 36 kV
ex85438995	52	Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing
ex85489090	47	Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 450 nm or more but not exceeding 660 nm, contained in a lead frame housing having a circular opening whose exterior dimensions without fittings – do not exceed 4 × 4 mm
ex85489090	48	Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not exceeding 815 nm
ex85489090	49	LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only
ex94054035	10	Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more, but not exceeding 600 mm (± 1 mm), for the manufacture of goods of heading 8528

ANNEX II

Code NC	TARIC
ex29321100	10
ex29336980	10
ex38249099	54
ex39072099	25
ex39119099	75
ex39269099	75
ex39209100	93
ex39209959	60
ex39269099	85
ex85229098	44
ex85299081	31
ex85409100	32
ex85438995	52
ex85489090	39
ex85489090	46

Amendments and corrections
December 31, 2011	Repealed by 32011R1344
July 1, 2005	Application - See Art 2
June 30, 2005	Entry into force - Date pub. See Art 2

Council Regulation (EC) No 989/2005 of 27 June 2005 amending Regulation (EC) No 1255/96 temporarily suspending the autonomous common customs tariff duties on certain industrial, agricultural and fishery products