| CN code | TARIC | Description | Rate of autonomous duty (%)′ |
|---|
| ex29034300 | 10 | 1,1,1-Trichlorotrifluoroethane | 0 |
| ex29034910 | 10 | Chloro-1,1,1-trifluoroethane | 0 |
| ex29042000 | 50 | 2,2’-dinitro-bibenzyl | 0 |
| ex29062900 | 20 | 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene | 0 |
| ex29072900 | 85 | Phloroglucinol whether or not hydrated | 0 |
| ex29096000 | 10 | Bis(α,α-dimethylbenzyl) peroxide | 0 |
| ex29153990 | 60 | 1-phenylethyl acetate | 0 |
| ex29163900 | 85 | 2,6-difluorobenzoic acid | 0 |
| ex29209010 | 40 | Dimethyl carbonate | 0 |
| ex29209085 | 50 | tri iso octyl phosphite | 0 |
| ex29214210 | 85 | 3,5-dichloroaniline | 0 |
| ex29215119 | 20 | Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight | 0 |
| ex29241900 | 50 | Acrylamide | 0 |
| ex29242995 | 91 | 3-hydroxy-2’-methoxy-2-naphthanilide | 0 |
| ex29242995 | 92 | 3-hydroxy-2-naphthanilide | 0 |
| ex29242995 | 93 | 3-hydroxy-2’-methyl-2-naphthanilide | 0 |
| ex29242995 | 94 | 2’-ethoxy-3-hydroxy-2-naphthanilide | 0 |
| ex29242995 | 96 | 4’-chloro-3-hydroxy-2’,5’-dimethoxy-2-naphthanilide | 0 |
| ex29269095 | 25 | Aminoacetonitrile hydrochloride | 0 |
| ex29269095 | 35 | 2-Bromo-2(bromomethyl) pentanedinitrile | 0 |
| ex29329970 | 40 | 1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol | 0 |
| ex29329985 | 30 | Carbofuran (ISO) | 0 |
| ex29331990 | 30 | 3-methyl-1-p. -tolyl-5-pyrazolone | 0 |
| ex29333999 | 40 | 2-chloropyridine | 0 |
| ex29335995 | 85 | Adenine | 0 |
| ex29339990 | 88 | 2,6-dichloroquinoxaline | 0 |
| ex29350090 | 88 | N-(2-(4-amino-N-ethyl-m-toluidino)ethyl)methanesulfonamide sesquisulfate monohydrate | 0 |
| ex32050000 | 10 | Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry | 0 |
| ex32089019 | 85 | Mixture containing by weight:- 30-45 % Polyamide resin;
- 2-10 % Diazonaphthoquinone;
- 50-65 % γ-Butyrolactone.
| 0 |
| ex34021190 | 10 | Surfactant mixture, of disodium salts of dodecyl (sulphophenoxy)benzenesulphonic acid and oxybis (dodecylbenzenesulphonic acid) | 0 |
| ex38119000 | 10 | Dinonylnaphthylsulphonic acid salt, in the form of a solution in mineral oil, for use as an additive for distillate fuels and lubricating oils | 0 |
| ex38140090 | 40 | Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether | 0 |
| ex38159090 | 88 | Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:- 4 % or more but not more than 10 % of titanium and
- 10 % or more but not more than 20 % magnesium
| 0 |
| ex38159090 | 89 | Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile | 0 |
| ex38249099 | 54 | 2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile | 0 |
| ex38249099 | 70 | Preparation, in an aqueous solution, of tetramethylammonium hydroxide and a surfactant containing:- 2,38 % (+/-0,01) by weight of tetramethylammonium hydroxide,and
- a surfactant of 100 to 500 ppm.
| 0 |
| ex38249099 | 80 | Preparation containing by weight 81 % or more but not more than 89 % bis (3,4-epoxy-cyclohexylmethyl)-adipate | 0 |
| ex38249099 | 97 | Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents | 0 |
| ex39046990 | 97 | Copolymer of chlorotrifluoroethylene and vinylidene difluoride | 0 |
| ex39069090 | 55 | Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets | 0 |
| ex39069090 | 85 | Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends | 0 |
| ex39089000 | 40 | Thermoplastic polyamide resin having a fire point of more than 750 °C, for use in the manufacture of deflection yokes of cathode ray tubes | 0 |
| ex39119099 | 75 | Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220 μm or more but not exceeding 575 μm | 0 |
| ex39269099 | 75 |
| ex39139000 | 98 | Sodium hyaluronate | 0 |
| ex39191069 | 95 | Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet | 0 |
| ex39199069 | 98 |
| ex39199031 | 70 | Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters | 0 |
| ex39202021 | 30 | Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm. | 0 |
| ex39209100 | 93 | Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:- a visible light transmission of 50 % or more,
- coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),
- a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account,
for use in the manufacture of heat-reflecting or decorative laminated glass | 0 |
| ex39209959 | 60 | Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not exceeding 90 μm, a tensile strength at break of 20 MPa or more but not exceeding 45 MPa and an elongation at break of 250 % or more but not exceeding 900 % | 0 |
| ex39219060 | 94 | Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not exceeding 1,2 mm | 0 |
| ex39269099 | 15 | Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems | 0 |
| ex39269099 | 25 | Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 4,6 μm | 0 |
| ex69091900 | 60 | Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume not exceeding 65 liters, having per cm2 of the surface of the cross section one or more closed channels at the tail end | 0 |
| ex70071920 | 10 | Glass plate of a diagonal size of 81,28 cm (+/– 1,5 cm) or more, but not exceeding 185,42 cm (+/– 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP video monitors or television sets | 0 |
| ex70072900 | 10 | Glass plate of a diagonal size of 81,28 cm (+/– 1,5cm) or more, but not exceeding 185,42 cm (+/– 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP video monitors or television sets | 0 |
| ex85011099 | 81 | DC stepping motor, with an angle of step of 18° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 × 68 mm, a two phase winding and an output not exceeding 5 W | 0 |
| ex85011099 | 82 | DC motor, brushless, with an external diameter not exceeding 29 mm, a rated speed of 1500 (± 15 %) or 6800 (± 15 %) rpm, a supply voltage of 2 or 8 V | 0 |
| ex85011099 | 83 | Multiphase electric motor with D.C. current, without brush, of a normal power drive of 31 W (+/– 5 W) calculated with 600 rpm (revolution per minute), equipped with electronic circuit provided with sensors using Hall effect (electric power steering motor) | 0 |
| ex85051100 | 33 | Neodymium-magnet discs with a diameter not exceeding 90 mm, whether or not containing a hole in the centre | 0 |
| ex85078094 | 30 | Electric lithium-ion accumulator, with:- a length of 35 mm or more, but not more than 45 mm
- a width of 35 mm or more, but not more than 53 mm
- a thickness of 3,5 mm or more, but not more than 7 mm
- a mass of 15,5 g or more, but not more than 35 g
- a rated capacity of 600 mAh or more, but not more than 780 mAh
- a nominal voltage of 3,7 V
for use in the manufacture of mobile phones | 0 |
| ex85169000 | 33 | Stainless steel soleplate with heating wire, for use in the manufacture of electric irons (1) | 0 |
| ex85169000 | 35 | Steam iron, not capable of independent operation, for use in the manufacture of steam ironing systems | 0 |
| ex85229098 | 44 | Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording | 0 |
| ex85229098 | 49 | Magnetic head for playback of audio tapes, for use in the manufacture of products falling within heading 8 519 | 0 |
| ex85299081 | 44 | LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only | 0 |
| ex85371099 | 94 | Unit consisting of two junction field effect transistors contained in a dual lead frame housing | 0 |
| ex85438995 | 66 |
| ex85371099 | 95 | Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual lead frame housing | 0 |
| ex85438995 | 65 |
| ex85409100 | 32 | Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 36 kV | 0 |
| ex85438995 | 52 | Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing | 0 |
| ex85489090 | 47 | Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 450 nm or more but not exceeding 660 nm, contained in a lead frame housing having a circular opening whose exterior dimensions without fittings – do not exceed 4 × 4 mm | 0 |
| ex85489090 | 48 | Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not exceeding 815 nm | 0 |
| ex85489090 | 49 | LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only | 0 |
| ex94054035 | 10 | Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more, but not exceeding 600 mm (± 1 mm), for the manufacture of goods of heading 8528 | 0 |