Article 1The Annex to Regulation (EC) No 1255/96 is hereby amended as follows:1.The products set out in Annex I to this Regulation are inserted in the Annex to Regulation (EC) No 1255/96.2.The products for which the codes are set out in Annex II to this Regulation are deleted from the Annex to Regulation (EC) No 1255/96.

Article 2This Regulation shall enter into force on the third day following that of its publication in the Official Journal of the European Union.It shall apply with effect from 1 July 2004.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 5 July 2004.For the CouncilThe PresidentG. ZalmANNEX I

Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.

CN code	TARIC	Description	Rate of autonomous duty(%)
ex2812900020	20	Silicon tetrafluoride	0
ex2903308050	50	1,1,1,3,3-Pentafluoropropane, for use as non-flammable liquid blowing agent in the formation of insulating foams	0
ex2903308060	60	Octafluoropropane	0
ex2905190030	30	2,6-Dimethylheptan-4-ol	0
ex2909190030	30	Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more	0
ex2912420010	10	Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)	0
ex2914700040	40	Perfluoro(2-methylpentan-3-one)	0
ex2915399050	50	3-Acetylphenyl acetate	0
ex2920901030	30	4-Ethyl-1,3-dioxolan-2-one	0
ex2921290040	40	N,N'-Di-tert-butylethylenediamine	0
ex2922198050	50	2-(2-Methoxyphenoxy)ethylamine	0
ex2923900080	80	Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride	0
ex2925199520	20	N-(9-Fluorenylmethoxycarbonyloxy)succinimide	0
ex2928009080	80	Cyflufenamid (ISO)	0
ex2930907088	88	Methylene dithiocyanate	0
ex2932190070	70	Furfurylamine	0
ex2932190075	75	Tetrahydro-2-methylfuran	0
ex2932190080	80	Octafluorotetrahydrofuran	0
ex2932997060	60	Calcium bis[4-O-(β-D-galactopyranosyl)-D-gluconate] dihydrate	0
ex2933993020	20	5H-Dibenz[b,f]azepine-5-carbonyl chloride	0
ex2934999072	72	1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione	0
ex2934999073	73	N-(5-Mercapto-1,3,4-thiadiazol-2-yl)acetamide	0
ex2935009015	15	Flupyrsulfuron-methyl-sodium (ISO)	0
ex2935009025	25	Triflusulfuron-methyl (ISO)	0
ex2935009035	35	Chlorsulfuron (ISO)	0
ex2935009045	45	Rimsulfuron (ISO)	0
ex2935009055	55	Thifensulfuron-methyl (ISO)	0
ex2935009065	65	Tribenuron-methyl (ISO)	0
ex2935009075	75	Metsulfuron-methyl (ISO)	0
ex2935009087	87	4'-Sulfamoylacetanilide	0
32065000		Inorganic products of a kind used as luminophores	0
ex3207408030	30	Glass frit, for use in the manufacture of cathode-ray tubes	0
ex3215110010	10	Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments	0
ex3215190010	10		0
ex3215908030	30	Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of heading No 8443	0
ex3707903020	20	Toner, based on a polyol resin, in the form of powder	0
ex3707903030	30	Two-component toner, liquid, in the form of a set consisting of a container containing a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments, and a container containing isoparaffins	0
ex3801209010	10	Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes	0
ex3814009020	20	Mixture containing by weight:69 % or more but not more than 71 % of 1-methoxypropan-2-ol,29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate	0
ex3814009030	30	Azeotrope mixture containing by weight 30 % or more but not more than 50 % of trans-dichloroethylene and a mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether	0
ex3815199035	35	Catalyst, in the form of rodlets of a length of 5,5 mm or more but not exceeding 6,5 mm, consisting of copper oxide and zinc oxide fixed on a support of aluminium oxide, containing by weight:55 % or more but not more than 60 % of copper oxideand30 % or more but not more than 35 % of zinc oxide	0
ex3824909992	92	Bis{4-[(5-chloro-2-hydroxyphenyl)azo]-3-hydroxy-N-phenyl-2-naphthalene= carboxyamidate}ferrate with a mixture of ammonium, sodium and hydrogen cations	0
ex3824909993	93	Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 42 % or more but not more than 52 % of diallyl 2,2'-oxydiethyl dicarbonate and 33 % or more but not more than 43 % of a copolymer of terephthalic acid, propane-1,2-diol and allyl alcohol	0
ex3824909994	94	Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 73 % or more of diallyl 2,2'-oxydiethyl dicarbonate	0
ex3824909995	95	Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols	0
ex3901209030	30	Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,940 or more but not exceeding 0,943 and a melt flow index of 27 g/10 min (± 5 g/10 min) (MFI 190 °C/2,16 kg as determined by the ISO 1133 method), for the manufacture of bicomponent spunbonded non-wovens	0
ex3904610030	30	Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not exceeding 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm	0
ex3906909050	50	Polymers of esters of acrylic acid with one or more of the following monomers in the chain:chloromethyl vinyl ether,chloroethyl vinyl ether,chloromethylstyrene,vinyl chloroacetate,methacrylic acid,butenedioic acid monobutyl ester,containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6(b) to Chapter 39	0
ex3907209945	45	Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups	0
ex3907209950	50	Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups	0
ex3911909975	75	Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 325 μm or more but not exceeding 575 μm	0
ex3926909975	75		0
ex3911909980	80	Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.02,6]decane-3,5-diyl)ethylene]	0
ex3916909010	10	Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames	0
ex3920102640	40	Film of polyethylene, of a kind used for typewriter ribbon	0
ex3920431096	96	Film, of a specular gloss of 70 or more measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances	0
ex3920621901	01	Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not exceeding 350 μm, consisting especially of a layer containing carbon black	0
ex3920621903	03		0
ex3920621904	04	Poly(ethylene terephthalate) film, of a thickness of less than 11 μm, for the manufacture of audiodigital tapes for cassettes	0
ex3920621906	06		0
ex3920621907	07	Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 μm, either:only dyed in the mass, ordyed in the mass and metallized on one side	0
ex3920621909	09		0
ex3920621911	11	Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0
ex3920621913	13		0
ex3920621914	14	Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not exceeding 30 μm, coated on one side with silicone, for use in the manufacture of window film	3
ex3920621916	16		3
ex3920621917	17	Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0
ex3920621919	19		0
ex3920621921	21	Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not exceeding 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm	0
ex3920621923	23		0
ex3920621924	24	Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 μm, which only:contains a colouring and/or UV-absorbing material throughout the massandis metallised on one side,whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive	0
ex3920621926	26		0
ex3920621927	27	Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 μm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 37012000	0
ex3920621929	29		0
ex3920621931	31	Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 37012000	0
ex3920621933	33		0
ex3920621934	34	Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 μm (± 0,7 μm) or of 30 μm (± 0,9 μm), for the manufacture of audio magnetic tapes of a total thickness of 33 μm or more	0
ex3920621936	36		0
ex3920621937	37	Poly(ethylene terephthalate) film, of a thickness not exceeding 12 μm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm	0
ex3920621939	39		0
ex3920621941	41	Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not exceeding 25 μm, having:a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method)anda shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)	0
ex3920621943	43		0
ex3920621944	44	Poly(ethylene terephthalate) film, of a thickness not exceeding 19 μm or of a weight of 20 g/m2 or more but not exceeding 26,7 g/m2, for use in the manufacture of photo-resist film	0
ex3920621946	46		0
ex3920621947	47	Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (± 3 μm)	0
ex3920621949	49		0
ex3920621951	51	Film of poly(ethylene terephthalate), coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 μm and having a surface resistivity not exceeding 10000 ohms (per square) (as determined by the ASTM D 257-93 method)	0
ex3920621953	53		0
ex3920621954	54	Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45 o and 18 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more	0
ex3920621956	56		0
ex3920621957	57	Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not exceeding 253 μm, coated on both sides with an antistatic layer	0
ex3920621959	59		0
ex3920621961	61	Film of a total thickness of 4,5 μm (± 0,16 μm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm2 (± 2 kg/mm2) and a tensile strength (in the machine direction) of more than 28 kg/mm2, and of an anti-adherent coating	0
ex3920621963	63		0
ex3920621967	67	Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 μm or more but not exceeding 26 μm	0
ex3920621969	69		0
ex3920621974	74	Multilayer film of a thickness not exceeding 150 μm, consisting of a polyester film coated on one side with polycarbonate resin, metallized on the other side with titanium coated with polycarbonate resin and other layers containing N,N'-diphenyl-N,N'-di-m-tolylbiphenyl-4,4'-ylenediamine	0
ex3920621976	76		0
ex3920629031	31	Film of poly(ethylene terephthalate), of a thickness of 500 μm (± 25 μm)	0
ex3920629033	33		0
ex3921906093	93	Film, of a specular gloss of 30 or more but not exceeding 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metalized adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances	0
ex3926909985	85	Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 3,3 μm	0
ex5803100091	91	Gauze of cotton, of a width of less than 1500 mm	0
ex6914909030	30	Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm	0
ex7019909920	20	Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)	0
ex7606111020	20	Tape of not alloyed aluminium, with a reflecting film, a transparent polyurethane topcoat, a netting and ceramic anti-skid particles	0
ex8505199032	32	Magnet, for use in the manufacture of deflection yokes	0
ex8522905995	95	Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video units	0
ex8522909845	45	Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521	0
ex8522909847	47	Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings No 8519, 8520, 8521, 8526, 8527, 8528 or 8543	0
ex8548909045	45		0
ex8525309030	30	Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions not exceeding 50 × 60 × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels not exceeding 440000, for use in CCTV surveillance systems	0
ex8528219020	20	Liquid cristal display colour video monitor having a DC input voltage of 10 V or more but not exceeding 30 V or a fix DC input voltage of 12 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 94	0
ex8529908140	40	Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors	0
ex8540111193	93	Colour cathode-ray tube, equipped with one gun with three rays and with a diagonal measurement of the screen of 19 cm or more but not exceeding 26 cm	0
ex8544601010	10	Anode cap cable, for use in the manufacture of fly back transformers	0
ex8548909046	46	Optical unit, consisting at least of a laser diode and a photodiode, operating at a typical wavelength of 654 nm or more but not exceeding 787 nm	0
ex9032899020	20	Electronic controller of eletric power steering (EPS controller)	0

ANNEX II

CN code	TARIC
ex32159080	30
ex39043000	20
ex39069090	50
ex39204310	96
ex39206219	05
ex39206219	10
ex39206219	15
ex39206219	25
ex39206219	30
ex39206219	35
ex39206219	40
ex39206219	45
ex39206219	50
ex39206219	55
ex39206219	60
ex39206219	62
ex39206219	64
ex39206219	65
ex39206219	70
ex39206219	75
ex39206219	80
ex39206219	81
ex39206219	85
ex39206219	87
ex39206219	89
ex39206290	30
ex39219060	93
ex39231000	10
ex70060090	40
ex76169990	40
ex84198998	20
ex84248995	10
ex84248995	20
ex84602190	10
ex84604010	10
ex84609090	10
ex84609090	20
ex84639000	10
ex84642019	10
ex84798998	10
ex84798998	20
ex84798998	30
ex85229059	95
ex85229098	45
ex85229098	47
ex85282190	20
ex85299081	40
ex85401111	93
ex85438995	58
ex85489090	45
ex90318034	10
ex90318039	30
ex90318099	10
ex90319080	20
ex90319080	40
ex90319080	50

Amendments and corrections
December 31, 2011	Repealed by 32011R1344
July 11, 2004	Entry into force - Date pub. + 3 See Art 2
July 1, 2004	Application - See Art 2

Council Regulation (EC) No 1241/2004 of 5 July 2004 amending Regulation (EC) No 1255/96 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products