Regulation (EC) No 850/2004 of the European Parliament and of the Council of 29 April 2004 on persistent organic pollutants and amending Directive 79/117/EEC
Modified by
  • Council Regulation (EC) No 1195/2006of 18 July 2006amending Annex IV to Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants(Text with EEA relevance), 32006R1195, August 8, 2006
  • Council Regulation (EC) No 172/2007of 16 February 2007amending Annex V to Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants(Text with EEA relevance), 32007R0172, February 23, 2007
  • Commission Regulation (EC) No 323/2007of 26 March 2007amending Annex V to Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants and amending Directive 79/117/EEC(Text with EEA relevance), 32007R0323, March 27, 2007
  • Regulation (EC) No 219/2009 of the European Parliament and of the Councilof 11 March 2009adapting a number of instruments subject to the procedure referred to in Article 251 of the Treaty to Council Decision 1999/468/EC with regard to the regulatory procedure with scrutinyAdaptation to the regulatory procedure with scrutiny — Part Two, 32009R0219, March 31, 2009
  • Commission Regulation (EC) No 304/2009of 14 April 2009amending Annexes IV and V to Regulation (EC) No 850/2004 of the European Parliament and of the Council as regards the treatment of waste containing persistent organic pollutants in thermal and metallurgical production processes(Text with EEA relevance), 32009R0304, April 15, 2009
  • Commission Regulation (EU) No 756/2010of 24 August 2010amending Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants as regards Annexes IV and V(Text with EEA relevance), 32010R0756, August 25, 2010
  • Commission Regulation (EU) No 757/2010of 24 August 2010amending Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants as regards Annexes I and III(Text with EEA relevance), 32010R0757, August 25, 2010
  • Commission Regulation (EU) No 519/2012of 19 June 2012amending Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants as regards Annex I(Text with EEA relevance), 32012R0519, June 20, 2012
  • Commission Regulation (EU) No 1342/2014of 17 December 2014amending Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants as regards Annexes IV and V(Text with EEA relevance), 32014R1342, December 18, 2014
  • Commission Regulation (EU) 2015/2030of 13 November 2015amending Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants as regards Annex I(Text with EEA relevance), 32015R2030, November 14, 2015
  • Commission Regulation (EU) 2016/293of 1 March 2016amending Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants as regards Annex I(Text with EEA relevance), 32016R0293, March 2, 2016
  • Commission Regulation (EU) 2016/460of 30 March 2016amending Annexes IV and V to Regulation (EC) No 850/2004 of the European Parliament and of the Council on persistent organic pollutants, 32016R0460, March 31, 2016
  • Regulation (EU) 2019/1021 of the European Parliament and of the Councilof 20 June 2019on persistent organic pollutants(recast)(Text with EEA relevance), 32019R1021, June 25, 2019
Corrected by
  • Corrigendum to Regulation (EC) No 850/2004 of the European Parliament and of the Council of 29 April 2004 on persistent organic pollutants and amending Directive 79/117/EEC, 32004R0850R(01), June 29, 2004
Regulation (EC) No 850/2004 of the European Parliament and of the Councilof 29 April 2004on persistent organic pollutants and amending Directive 79/117/EEC
Article 1Objective and scope1.Taking into account, in particular, the precautionary principle, the objective of this Regulation is to protect human health and the environment from persistent organic pollutants by prohibiting, phasing out as soon as possible, or restricting the production, placing on the market and use of substances subject to the Stockholm Convention on Persistent Organic Pollutants, hereinafter "the Convention", or the 1998 Protocol to the 1979 Convention on Long-Range Transboundary Air Pollution on Persistent Organic Pollutants, hereinafter "the Protocol", and by minimising, with a view to eliminating where feasible as soon as possible, releases of such substances, and by establishing provisions regarding waste consisting of, containing or contaminated by any of these substances.2.Articles 3 and 4 shall not apply to waste consisting of, containing or contaminated by any substance listed in Annexes I or II.
Article 2DefinitionsFor the purposes of this Regulation:(a)"placing on the market" means supplying or making available to third persons against payment or free of charge. Imports into the customs territory of the Community shall also be deemed to be placed on the market;(b)"article" means an object composed of one or more substances and/or preparations which during production is given a specific shape, surface or design determining its end use function to a greater extent than its chemical composition does;(c)"substance" is as defined in Article 2 of Council Directive 67/548/EECCouncil Directive 67/548/EEC of 27 June 1967 on the approximation of laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances (OJ P 196, 16.8.1967, p. 1). Directive as last amended by Council Regulation (EC) No 807/2003.;(d)"preparation" is as defined in Article 2 of Directive 67/548/EEC;(e)"waste" is as defined in Article 1(a) of Council Directive 75/442/EECCouncil Directive 75/442/EEC of 15 July 1975 on waste (OJ L 194, 25.7.1975, p. 39). Directive as last amended by Regulation (EC) No 1882/2003 of the European Parliament and of the Council (OJ L 284, 31.10.2003, p. 1).;(f)"disposal" is as defined in Article 1(e) of Directive 75/442/EEC;(g)"recovery" is as defined in Article 1(f) of Directive 75/442/EEC.
Article 3Control of production, placing on the market and use1.The production, placing on the market and use of substances listed in Annex I, whether on their own, in preparations or as constituents of articles, shall be prohibited.2.The production, placing on the market and use of substances listed in Annex II, whether on their own, in preparations or as constituents of articles, shall be restricted in accordance with the conditions set out in that Annex.3.Member States and the Commission shall, within the assessment and authorisation schemes for existing and new chemicals and pesticides under the relevant Community legislation, take into consideration the criteria set out in paragraph 1 of Annex D to the Convention and take appropriate measures to control existing chemicals and pesticides and prevent the production, placing on the market and use of new chemicals and pesticides, which exhibit characteristics of persistent organic pollutants.
Article 4Exemptions from control measures1.Article 3 shall not apply in the case of:(a)a substance used for laboratory-scale research or as a reference standard;(b)a substance occurring as an unintentional trace contaminant in substances, preparations or articles.2.Article 3 shall not apply in respect of substances occurring as a constituent of articles produced before or on the date of entry into force of this Regulation until six months after the date of its entry into force.Article 3 shall not apply in the case of a substance occurring as a constituent of articles already in use before or on the date of entry into force of this Regulation.However, immediately upon becoming aware of articles referred to in the first and second subparagraph, a Member State shall inform the Commission accordingly.Whenever the Commission is so informed or otherwise learns of such articles, it shall, where appropriate, notify the Secretariat of the Convention accordingly without further delay.3.Where a substance is listed in Part A of Annex I or in Part A of Annex II, a Member State wishing to permit, until the deadline specified in the relevant Annex, the production and use of that substance as a closed-system site-limited intermediate shall notify accordingly the Secretariat of the Convention.However, such notification may be made only if the following conditions are satisfied:(a)an annotation has been entered in the relevant Annex expressly to the effect that such production and use of that substance may be permitted;(b)the manufacturing process will transform the substance into one or more other substances that do not exhibit the characteristics of a persistent organic pollutant;(c)it is not expected that either humans or the environment will be exposed to any significant quantities of the substance during its production and use, as shown through assessment of that closed system in accordance with Commission Directive 2001/59/ECCommission Directive 2001/59/EC of 6 August 2001 adapting to technical progress for the 28th time Council Directive 67/548/EEC on the approximation of the laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances (OJ L 225, 21.8.2001, p. 1)..The notification shall be communicated also to the other Member States and to the Commission and shall give details of actual or estimated total production and use of the substance concerned and the nature of the closed-system site-limited process, specifying the amount of any non-transformed and unintentional trace contamination by any persistent organic pollutant starting material in the final product.The deadlines referred to in the first subparagraph may be amended in cases where, following a repeat notification from the Member State concerned to the Secretariat of the Convention, express or tacit consent is issued under the Convention for the continued production and use of the substance for another period.
Article 5Stockpiles1.The holder of a stockpile, which consists of or contains any substance listed in Annex I or Annex II, for which no use is permitted, shall manage that stockpile as waste and in accordance with Article 7.2.The holder of a stockpile greater than 50 kg, consisting of or containing any substance listed in Annex I or Annex II, and the use of which is permitted shall provide the competent authority of the Member State in which the stockpile is established with information concerning the nature and size of that stockpile. Such information shall be provided within 12 months of the entry into force of this Regulation and of amendments to Annexes I or II and annually thereafter until the deadline specified in Annex I or II for restricted use.The holder shall manage the stockpile in a safe, efficient and environmentally sound manner.3.Member States shall monitor the use and management of notified stockpiles.
Article 6Release reduction, minimisation and elimination1.Within two years of the date of entry into force of this Regulation, Member States shall draw up and maintain release inventories for the substances listed in Annex III into air, water and land in accordance with their obligations under the Convention and the Protocol.2.A Member State shall communicate its action plan on measures to identify, characterise and minimise with a view to eliminating where feasible as soon as possible the total releases developed in accordance with its obligations under the Convention, to both the Commission and the other Member States as part of its national implementation plan, pursuant to Article 8.The action plan shall include measures to promote the development and, where it deems appropriate, shall require the use of substitute or modified materials, products and processes to prevent the formation and release of the substances listed in Annex III.3.Member States shall, when considering proposals to construct new facilities or significantly to modify existing facilities using processes that release chemicals listed in Annex III, without prejudice to Council Directive 1996/61/ECCouncil Directive 96/61/EC of 24 September 1996 concerning integrated pollution prevention and control (OJ L 257, 10.10.1996, p. 26. Directive as last amended by Regulation (EC) No 1882/2003., give priority consideration to alternative processes, techniques or practices that have similar usefulness but which avoid the formation and release of substances listed in Annex III.
Article 7Waste management1.Producers and holders of waste shall undertake all reasonable efforts to avoid, where feasible, contamination of this waste with substances listed in Annex IV.2.Notwithstanding Directive 96/59/ECCouncil Directive 96/59/EC of 16 September 1996 on the disposal of polychlorinated biphenyls and polychlorinated terphenyls (PCB/PCT) (OJ L 243, 24.9.1996, p. 31)., waste consisting of, containing or contaminated by any substance listed in Annex IV shall be disposed of or recovered, without undue delay and in accordance with Annex V, part 1 in such a way as to ensure that the persistent organic pollutant content is destroyed or irreversibly transformed so that the remaining waste and releases do not exhibit the characteristics of persistent organic pollutants.In carrying out such a disposal or recovery, any substance listed in Annex IV may be isolated from the waste, provided that this substance is subsequently disposed of in accordance with the first subparagraph.3.Disposal or recovery operations that may lead to recovery, recycling, reclamation or re-use of the substances listed in Annex IV shall be prohibited.4.By way of derogation from paragraph 2:(a)waste containing or contaminated by any substance listed in Annex IV may be otherwise disposed of or recovered in accordance with the relevant Community legislation, provided that the content of the listed substances in the waste is below the concentration limits to be specified in Annex IV. Those measures, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 17(3). Until such time as concentration limits are established in accordance with such procedure, the competent authority of a Member State may adopt or apply concentration limits or specific technical requirements in respect of the disposal or recovery of waste under this point.(b)a Member State or the competent authority designated by that Member State may, in exceptional cases, allow wastes listed in Annex V, part 2 containing or contaminated by any substance listed in Annex IV up to concentration limits to be specified in Annex V, part 2, to be otherwise dealt with in accordance with a method listed in Annex V, part 2 provided that:(i)the holder concerned has demonstrated to the satisfaction of the competent authority of the Member State concerned that decontamination of the waste in relation to substances listed in Annex IV was not feasible, and that destruction or irreversible transformation of the persistent organic pollutant content, performed in accordance with best environmental practice or best available techniques, does not represent the environmentally preferable option and the competent authority has subsequently authorised the alternative operation;(ii)this operation is in accordance with the relevant Community legislation and the conditions laid down in relevant additional measures referred to in paragraph 6; and(iii)the Member State concerned has informed the other Member States and the Commission of its authorisation and the justification for it.5.Concentration limits in Annex V, part 2 shall be established by the Commission for the purposes of paragraph 4(b) of this Article. Those measures, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 17(3).Until such time as these concentration limits are established:(a)the competent authority may adopt or apply concentration limits or specific technical requirements in respect of waste being dealt with under paragraph 4(b);(b)where waste is being dealt with under paragraph 4(b), the holders concerned shall provide information on the persistent organic pollutant content of the waste to the competent authority.6.The Commission may, where appropriate, and taking into consideration technical developments and relevant international guidelines and decisions and any authorisations granted by a Member State, or the competent authority designated by that Member State in accordance with paragraph 4 and Annex V, adopt additional measures relating to the implementation of this Article. The Commission shall define a format for the submission of the information by Member States in accordance with paragraph 4(b)(iii). Such measures shall be decided in accordance with the procedure laid down in Article 17(2).7.The Commission shall, before 31 December 2009, review the derogations in paragraph 4 in the light of international and technical developments, in particular with regard to their environmental preferability.
Article 8Implementation plans1.When preparing their national implementation plans, Member States shall, in accordance with their national procedures, give the public early and effective opportunities to participate in this process.2.As soon as a Member State has adopted its national implementation plan in accordance with its obligations under the Convention, it shall communicate it both to the Commission and to the other Member States.3.When preparing their implementation plans, the Commission and the Member States shall exchange information on the content, as appropriate.4.The Commission shall, within two years of the entry into force of this Regulation, draw up a plan for the implementation of Community obligations under the Convention.As soon as the Commission has adopted the Community implementation plan, it shall communicate it to the Member States.The Commission shall review and update the Community implementation plan, as appropriate.
Article 9MonitoringThe Commission and the Member States shall establish, in close cooperation, appropriate programmes and mechanisms, consistent with the state of the art, for the regular provision of comparable monitoring data on the presence of dioxins, furans and PCBs as identified in Annex III in the environment. When establishing such programmes and mechanisms, due account shall be taken of developments under the Protocol and the Convention.
Article 10Information exchange1.The Commission and the Member States shall facilitate and undertake the exchange within the Community and with third countries of information relevant to the reduction, minimisation or elimination, where feasible, of the production, use and release of persistent organic pollutants and to alternatives to those substances, specifying the risks and the economic and social costs related to such alternatives.2.The Commission and Member States, as appropriate, shall promote and facilitate with regard to persistent organic pollutants:(a)awareness programmes, including relating to their health and environmental effects and their alternatives and on the reduction or elimination of their production, use and release, especially for:(i)policy and decision makers,(ii)particularly vulnerable groups;(b)the provision of public information;(c)training, including workers, scientists, educators and technical and managerial personnel.3.Without prejudice to Directive 2003/4/EC of the European Parliament and of the Council of 28 January 2003 on public access to environmental informationOJ L 41, 14.2.2003, p. 26., information on health and safety of humans and the environment shall not be regarded as confidential. The Commission and the Member States that exchange other information with a third country shall protect any confidential information as mutually agreed.
Article 11Technical assistanceIn accordance with Articles 12 and 13 of the Convention, the Commission and the Member States shall cooperate in providing appropriate and timely technical and financial assistance to developing countries and countries with economies in transition to assist them, upon request and within available resources and taking into account their particular needs, to develop and strengthen their capacity to fully implement their obligations under the Convention. Such support may also be channelled through non-governmental organisations.
Article 12Reporting1.Member States shall every three years forward to the Commission information on the application of this Regulation, including information on infringements and penalties.2.Member States shall provide the Commission every year with statistical data on the actual or estimated total production and placing on the market of any substance listed in Annex I or II.3.Within three years of the date of entry into force of this Regulation and every three years thereafter, Member States shall provide the Commission with:(a)summary information compiled from the notifications, concerning stockpiles, received pursuant to Article 5(2);(b)summary information compiled from the release inventories drawn up pursuant to Article 6(1);(c)summary information on the presence of dioxins, furans and PCBs as identified in Annex III in the environment, as compiled pursuant to Article 9.4.As regards the data and information to be provided by Member States pursuant to paragraphs 1, 2 and 3, the Commission shall develop in advance a common format in accordance with the procedure referred to in Article 16(2).5.Regarding the substances listed in the Convention, the Commission shall, at intervals to be determined by the Conference of the Parties of the Convention, compile a report on the basis of the information provided by the Member States in accordance with paragraph 2 and communicate it to the Secretariat of the Convention.6.The Commission shall every three years compile a report on the application of this Regulation and shall integrate it with the information already available in the context of the EPER, as established by Commission Decision 2000/479/ECCommission Decision 2000/479/EC of 17 July 2000 on the implementation of a European pollutant emission register (EPER) according to Article 15 of Council Directive 96/61/EC concerning integrated pollution prevention and control (IPPC) (OJ L 192, 28.7.2000, p. 36)., and CORINAIR Emission Inventory of EMEP (Cooperative Programme for Monitoring and Evaluation of the Long-Range Transmission of Air Pollutants in Europe), and with the information provided by the Member States under paragraphs 1, 2 and 3 to form a synthesis report. This report shall include information on the use of derogations as referred to in Article 7(4). It shall forward a summary of the synthesis report to the European Parliament and to the Council and make it available to the public without delay.
Article 13PenaltiesMember States shall lay down the rules on penalties applicable to infringements of the provisions of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for must be effective, proportionate and dissuasive. The Member States shall notify those provisions to the Commission one year after entry into force of this Regulation at the latest and shall notify it without delay of any subsequent amendment affecting them.
Article 14Amendment of Annexes1.Whenever a substance is listed in the Convention or the Protocol, the Commission shall, where appropriate, amend Annexes I, II and III accordingly.Those measures, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 16(3).2.Whenever a substance is listed in the Convention or the Protocol, the Commission shall, where appropriate, amend Annex IV accordingly.Those measures, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 17(3).3.The Commission shall adopt modifications to the existing entries in Annexes I, II and III, including their adaptation to scientific and technical progress.Those measures, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 16(3).4.The Commission shall adopt modifications to the existing entries in Annex IV and modifications to Annex V, including their adaptation to scientific and technical progress.Those measures, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 17(3).
Article 15Competent authoritiesEach Member State shall designate the competent authority or authorities responsible for the administrative tasks required by this Regulation. It shall inform the Commission of such designation at the latest three months after the entry into force of this Regulation.
Article 16Committee for general matters1.The Commission shall be assisted by the Committee established by Article 29 of Directive 67/548/EEC for all matters under this Regulation except for those relating to waste.2.Where reference is made to this paragraph, Articles 5 and 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.The period laid down in Article 5(6) of Decision 1999/468/EC shall be set at three months.3.Where reference is made to this paragraph, Article 5a(1) to (4) and Article 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.
Article 17Committee for waste matters1.The Commission shall be assisted by the Committee established by Article 18 of Directive 75/442/EEC, for matters relating to waste under this Regulation.2.Where reference is made to this paragraph, Articles 5 and 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.The period laid down in Article 5(6) of Decision 1999/468/EC shall be set at three months.3.Where reference is made to this paragraph, Article 5a(1) to (4) and Article 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.
Article 18Amendments to Directive 79/117/EECIn Part B of the Annex to Directive 79/117/EEC, "Persistent organochlorine compounds", items 1 to 8 shall be deleted.
Article 19Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX I
Part A —Substances listed in the Convention and in the Protocol as well as substances listed only in the ConventionOJ L 37, 13.2.2003, p. 19.OJ L 24, 29.1.2008, p. 8.Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).
SubstanceCAS NoEC NoSpecific exemption on intermediate use or other specification
Tetrabromodiphenyl etherC12H6Br4O1.For the purposes of this entry, Article 4(1)(b) shall apply to concentrations of Tetrabromodiphenyl ether equal to or below 10 mg/kg (0,001 % by weight) when it occurs in substances, preparations, articles or as constituents of the flame-retarded parts of articles.2.By way of derogation, the production, placing on the market and use of the following shall be allowed:(a)without prejudice to subparagraph (b), articles and preparations containing concentrations below 0,1 % of tetrabromodiphenyl ether by weight when produced partially or fully from recycled materials or materials from waste prepared for re-use;(b)electrical and electronic equipment within the scope of Directive 2002/95/EC of the European Parliament and Council.3.Use of articles already in use in the Union before 25 August 2010 containing Tetrabromodiphenyl ether as a constituent of such articles shall be allowed. Article 4(2), third and fourth subparagraphs shall apply in relation to such articles.
Pentabromodiphenyl etherC12H5Br5O1.For the purposes of this entry, Article 4(1)(b) shall apply to concentrations of pentabromodiphenyl ether equal to or below 10 mg/kg (0,001 % by weight) when it occurs in substances, preparations, articles or as constituents of the flame-retarded parts of articles.2.By way of derogation, the production, placing on the market and use of the following shall be allowed:(a)without prejudice to subparagraph (b), articles and preparations containing concentrations below 0,1 % of pentabromodiphenyl ether by weight when produced partially or fully from recycled materials or materials from waste prepared for re-use;(b)electrical and electronic equipment within the scope of Directive 2002/95/EC.3.Use of articles already in use in the Union before 25 August 2010 containing Pentabromodiphenyl ether as a constituent of such articles shall be allowed. Article 4(2), third and fourth subparagraphs shall apply in relation to such articles.
Hexabromodiphenyl etherC12H4Br6O1.For the purposes of this entry, Article 4(1)(b) shall apply to concentrations of hexabromodiphenyl ether equal to or below 10 mg/kg (0,001 % by weight) when it occurs in substances, preparations, articles or as constituents of the flame-retarded parts of articles.2.By way of derogation, the production, placing on the market and use of the following shall be allowed:(a)without prejudice to subparagraph (b), articles and preparations containing concentrations below 0,1 % of hexabromobiphenyl ether by weight when produced partially or fully from recycled materials or materials from waste prepared for re-use;(b)electrical and electronic equipment within the scope of Directive 2002/95/EC.3.Use of articles already in use in the Union before 25 August 2010 containing Hexabromodiphenyl ether as a constituent of such articles shall be allowed. Article 4(2), third and fourth subparagraphs shall apply in relation to such articles.
Heptabromodiphenyl etherC12H3Br7O1.For the purposes of this entry, Article 4(1)(b) shall apply to concentrations of heptabromodiphenyl ether equal to or below 10 mg/kg (0,001 % by weight) when it occurs in substances, preparations, articles or as constituents of the flame-retarded parts of articles.2.By way of derogation, the production, placing on the market and use of the following shall be allowed:(a)without prejudice to subparagraph (b), articles and preparations containing concentrations below 0,1 % of heptabromodiphenyl ether by weight when produced partially or fully from recycled materials or materials from waste prepared for re-use;(b)electrical and electronic equipment within the scope of Directive 2002/95/EC.3.Use of articles already in use in the Union before 25 August 2010 containing Heptabromodiphenyl ether as a constituent of such articles shall be allowed. Article 4(2), third and fourth subparagraphs shall apply in relation to such articles.
Perfluorooctane sulfonic acid and its derivatives (PFOS)C8F17SO2X(X = OH, Metal salt (O-M+), halide, amide, and other derivatives including polymers)1.For the purposes of this entry, Article 4(1)(b) shall apply to concentrations of PFOS equal to or below 10 mg/kg (0,001 % by weight) when it occurs in substances or in preparations.2.For the purposes of this entry, Article 4(1) (b) shall apply to concentrations of PFOS in semi-finished products or articles, or parts thereof, if the concentration of PFOS is lower than 0,1 % by weight calculated with reference to the mass of structurally or micro-structurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is lower than 1 μg/m2 of the coated material.3.Use of articles already in use in the Union before 25 August 2010 containing PFOS as a constituent of such articles shall be allowed. Article 4(2), third and fourth subparagraphs shall apply in relation to such articles.4.Fire-fighting foams that were placed on the market before 27 December 2006 may be used until 27 June 2011.5.If the quantity released into the environment is minimised, production and placing on the market is allowed for the following specific uses provided that Member States report to the Commission every four years on progress made to eliminate PFOS:(a)until 26 August 2015, wetting agents for use in controlled electroplating systems;(b)photoresists or anti reflective coatings for photolithography processes;(c)photographic coatings applied to films, papers, or printing plates;(d)mist suppressants for non-decorative hard chromium (VI) plating in closed loop systems;(e)hydraulic fluids for aviation.Where derogations in points (a) to (e) above concern the production or use in an installation within the scope of Directive 2008/1/EC of the European Parliament and of the Council, the relevant best available techniques for the prevention and minimisation of emissions of PFOS described in the information published by the Commission pursuant to Article 17(2), second subparagraph, of Directive 2008/1/EC shall apply.As soon as new information on details of uses and safer alternative substances or technologies for the uses in points (b) to (e) becomes available, the Commission shall review the derogations in the second subparagraph so that:(i)the uses of PFOS will be phased out as soon as the use of safer alternatives is technically and economically feasible,(ii)a derogation can only be continued for essential uses for which safer alternatives do not exist and where the efforts undertaken to find safer alternatives have been reported on,(iii)releases of PFOS into the environment have been minimised by applying best available techniques.6.Once standards are adopted by the European Committee for Standardisation (CEN) they shall be used as the analytical test methods for demonstrating the conformity of substances, preparations and articles to paragraphs 1 and 2. Any other analytical method for which the user can prove equivalent performance could be used as an alternative to the CEN standards.
DDT (1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane)50-29-3200-024-3—
Chlordane57-74-9200-349-0—
Hexachlorocyclohexanes, including lindane58-89-9200-401-2—
319-84-6206-270-8
319-85-7206-271-3
608-73-1210-168-9
Dieldrin60-57-1200-484-5—
Endrin72-20-8200-775-7—
Heptachlor76-44-8200-962-3—
Endosulfan115-29-7959-98-833213-65-9204-079-41.Placing on the market and use of articles produced before or on 10 July 2012 containing endosulfan as a constituent of such articles shall be allowed until 10 January 2013.2.Placing on the market and use of articles already in use before or on 10 July 2012 containing endosulfan as a constituent of such articles shall be allowed.3.Article 4(2), third and fourth subparagraphs shall apply to articles referred to in paragraphs 1 and 2.
Hexachlorobenzene118-74-1200-273-9—
Chlordecone143-50-0205-601-3—
Aldrin309-00-2206-215-8—
Pentachlorobenzene608-93-5210-172-5—
Polychlorinated Biphenyls (PCB)1336-36-3 and others215-648-1 and othersWithout prejudice to Directive 96/59/EC, articles already in use at the time of the entry into force of this Regulation are allowed to be used
Mirex2385-85-5219-196-6—
Toxaphene8001-35-2232-283-3—
Hexabromobiphenyl36355-01-8252-994-2—
Hexabromocyclododecane"Hexabromocyclododecane" means: hexabromocyclododecane, 1,2,5,6,9,10-hexabromocyclododecane and its main diastereoisomers: alpha- hexabromocyclododecane; beta-hexabromocyclododecane; and gamma-hexabromocyclododecane25637-99-4,3194-55-6,134237-50-6,134237-51-7,134237-52-8247-148-4,221-695-91.For the purposes of this entry, Article 4(1)(b) shall apply to concentrations of hexabromocyclododecane equal to or below 100 mg/kg (0,01 % by weight) when it occurs in substances, preparations, articles or as constituents of the flame-retarded parts of articles, subject to review by the Commission by 22 March 2019.2.The use of hexabromocyclododecane, whether on its own or in preparations, in the production of expanded polystyrene articles, and the production and placing on the market of hexabromocyclododecane for such use, shall be allowed provided that such use has been authorised in accordance with Title VII of Regulation (EC) No 1907/2006 of the European Parliament and of the Council, or is the subject of an application for authorisation submitted by 21 February 2014 where a decision on that application has yet to be taken.The placing on the market and use of hexabromocyclododecane, whether on its own or in preparations, in accordance with this paragraph shall only be allowed until 26 November 2019 or, if earlier, the date of expiry of the review period specified in an authorisation decision or the date of withdrawal of that authorisation pursuant to Title VII of Regulation (EC) No 1907/2006.The placing on the market and use in buildings of expanded polystyrene articles, that contain hexabromocyclododecane as a constituent of such articles and are produced in accordance with the exemption in this paragraph, shall be allowed until 6 months after the date of expiry of that exemption. Such articles already in use by that date may continue to be used.3.Without prejudice to the exemption in paragraph 2, the placing on the market and use in buildings of expanded polystyrene articles and extruded polystyrene articles that contain hexabromocyclododecane as a constituent of such articles and are produced before or on 22 March 2016 shall be allowed until 22 June 2016. Paragraph 6 shall apply as if such articles were produced pursuant to the exemption in paragraph 2.4.Articles that contain hexabromocyclododecane as a constituent of such articles and are already in use before or on 22 March 2016 may continue to be used and further placed on the market and paragraph 6 shall not apply. Article 4(2), third and fourth subparagraphs shall apply to such articles.5.The placing on the market and use in buildings of imported expanded polystyrene articles that contain hexabromocyclododecane as a constituent of such articles shall be allowed until the date of expiry of the exemption in paragraph 2 and paragraph 6 shall apply as if such articles were produced pursuant to the exemption in paragraph 2. Such articles already in use by that date may continue to be used.6.Without prejudice to the application of other Union provisions on the classification, packaging and labelling of substances and mixtures, expanded polystyrene, in which hexabromocyclododecane is used pursuant to the exemption in paragraph 2, must be identifiable by labelling or other means throughout its life cycle.
Part B —Substances listed only in the ProtocolPolychlorinated naphthalenes means chemical compounds based on the naphthalene ring system, where one or more hydrogen atoms have been replaced by chlorine atoms.
SubstanceCAS NoEC NoSpecific exemption on intermediate use or other specification
Hexachlorobutadiene87-68-3201-765-51.Placing on the market and use of articles produced before or on 10 July 2012 containing hexachlorobutadiene as a constituent of such articles shall be allowed until 10 January 2013.2.Placing on the market and use of articles already in use before or on 10 July 2012 containing hexachlorobutadiene as a constituent of such articles shall be allowed.3.Article 4(2), third and fourth subparagraphs shall apply to articles referred to in paragraphs 1 and 2.
Polychlorinated naphthalenes1.Placing on the market and use of articles produced before or on 10 July 2012 containing polychlorinated naphthalenes as a constituent of such articles shall be allowed until 10 January 2013.2.Placing on the market and use of articles already in use before or on 10 July 2012 containing polychlorinated naphthalenes as a constituent of such articles shall be allowed.3.Article 4(2), third and fourth subparagraphs shall apply to articles referred to in paragraphs 1 and 2.
Alkanes C10-C13, chloro (short-chain chlorinated paraffins) (SCCPs)85535-84-8287-476-51.By way of derogation, the production, placing on the market and use of substances or preparations containing SCCPs in concentrations lower than 1 % by weight or articles containing SCCPs in concentrations lower than 0,15 % by weight shall be allowed.2.Use shall be allowed in respect of:(a)conveyor belts in the mining industry and dam sealants containing SCCPs already in use before or on 4 December 2015; and(b)articles containing SCCPs other than those referred to in (a) already in use before or on 10 July 2012.3.Article 4(2) third and fourth subparagraphs shall apply to the articles referred to in point 2 above.
ANNEX IILIST OF SUBSTANCES SUBJECT TO RESTRICTIONSANNEX IIILIST OF SUBSTANCES SUBJECT TO RELEASE REDUCTION PROVISIONSSubstance (CAS No)Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF)Hexachlorobenzene (HCB) (CAS No: 118-74-1)Polychlorinated biphenyls (PCB)Polycyclic aromatic hydrocarbons (PAHs)For the purpose of emission inventories, the following four compound indicators shall be used: benzo(a)pyrene, benzo(b) fluoranthene, benzo(k)fluoranthene and indeno(1,2,3-cd)pyrene.Pentachlorobenzene (CAS No 608-93-5)ANNEX IVList of substances subject to waste management provisions set out in Article 7
Polychlorinated naphthalenes means chemical compounds based on the naphthalene ring system, where one or more hydrogen atoms have been replaced by chlorine atoms.The limit is calculated as PCDD and PCDF according to the following toxic equivalency factors (TEFs):
PCDDTEF
2,3,7,8-TeCDD1
1,2,3,7,8-PeCDD1
1,2,3,4,7,8-HxCDD0,1
1,2,3,6,7,8-HxCDD0,1
1,2,3,7,8,9-HxCDD0,1
1,2,3,4,6,7,8-HpCDD0,01
OCDD0,0003
PCDFTEF
2,3,7,8-TeCDF0,1
1,2,3,7,8-PeCDF0,03
2,3,4,7,8-PeCDF0,3
1,2,3,4,7,8-HxCDF0,1
PCDDTEF
1,2,3,6,7,8-HxCDF0,1
1,2,3,7,8,9-HxCDF0,1
2,3,4,6,7,8-HxCDF0,1
1,2,3,4,6,7,8-HpCDF0,01
1,2,3,4,7,8,9-HpCDF0,01
OCDF0,0003
Where applicable, the calculation method laid down in European standards EN 12766-1 and EN 12766-2 shall apply."Hexabromocyclododecane" means hexabromocyclododecane, 1,2,5,6,9,10-hexabromocyclododecane and its main diastereoisomers: alpha-hexabromocyclododecane, beta-hexabromocyclododecane and gamma-hexabromocyclododecane.SubstanceCAS NoEC NoConcentration limit referred to in Article 7(4)(a)Endosulfan115-29-7959-98-833213-65-9204-079-450 mg/kgHexachlorobutadiene87-68-3201-765-5100 mg/kgPolychlorinated naphthalenes10 mg/kgAlkanes C10-C13, chloro (short-chain chlorinated paraffins) (SCCPs)85535-84-8287-476-510000 mg/kgTetrabromodiphenyl etherC12H6Br4OSum of the concentrations of tetrabromodiphenyl ether, pentabromodiphenyl ether, hexabromodiphenyl ether and heptabromodiphenyl ether: 1000 mg/kgPentabromodiphenyl etherC12H5Br5OHexabromodiphenyl etherC12H4Br6OHeptabromodiphenyl etherC12H3Br7OPerfluorooctane sulfonic acid and its derivatives (PFOS)C8F17SO2X(X = OH, Metal salt (O-M+), halide, amide, and other derivatives including polymers)50 mg/kgPolychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF)15 μg/kgDDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl)ethane)50-29-3200-024-350 mg/kgChlordane57-74-9200-349-050 mg/kgHexachlorocyclohexanes, including lindane58-89-9319-84-6319-85-7608-73-1210-168-9200-401-2206-270-8206-271-350 mg/kgDieldrin60-57-1200-484-550 mg/kgEndrin72-20-8200-775-750 mg/kgHeptachlor76-44-8200-962-350 mg/kgHexachlorobenzene118-74-1200-273-950 mg/kgChlordecone143-50-0205-601-350 mg/kgAldrin309-00-2206-215-850 mg/kgPentachlorobenzene608-93-5210-172-550 mg/kgPolychlorinated Biphenyls (PCB)1336-36-3 and others215-648-150 mg/kgMirex2385-85-5219-196-650 mg/kgToxaphene8001-35-2232-283-350 mg/kgHexabromobiphenyl36355-01-8252-994-250 mg/kgHexabromocyclododecane25637-99-4,3194-55-6,134237-50-6,134237-51-7,134237-52-8247-148-4221-695-91000 mg/kg, subject to review by the Commission by 20.4.2019ANNEX VWASTE MANAGEMENTPart 1Disposal and recovery under Article 7(2)The following disposal and recovery operations, as provided for in Annex IIA and IIB of Directive 75/442/EEC, are permitted for the purposes of Article 7(2) when applied in such a way as to ensure that the persistent organic pollutant content is destroyed or irreversibly transformedD9Physico-chemical treatment,D10Incineration on land, andR1Use principally as a fuel or other means to generate energy, excluding waste containing PCBs.R4Recycling/reclamation of metals and metal compounds, under the following conditions: The operations are restricted to residues from iron- and steel-making processes such as dusts or sludges from gas treatment or mill scale or zinc-containing filter dusts from steelworks, dusts from gas cleaning systems of copper smelters and similar wastes and lead-containing leaching residues of the non-ferrous metal production. Waste containing PCBs is excluded. The operations are restricted to processes for the recovery of iron and iron alloys (blast furnace, shaft furnace and hearth furnace) and non-ferrous metals (Waelz rotary kiln process, bath melting processes using vertical or horizontal furnaces), provided the facilities meet as minimum requirements the emission limit values for PCDDs and PCDFs laid down in Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of wasteOJ L 332, 28.12.2000, p. 91., whether or not the processes are subject to that Directive, and without prejudice to the other provisions of Directive 2000/76/EC where it applies and to the provisions of Directive 96/61/EC.Pre-treatment operation prior to destruction or irreversible transformation pursuant to this Part of this Annex may be performed, provided that a substance listed in Annex IV that is isolated from the waste during the pre-treatment is subsequently disposed of in accordance with this Part of this Annex. Where only part of a product or waste, such as waste equipment, contains or is contaminated with persistent organic pollutants, it shall be separated and then disposed of in accordance with the requirements of this Regulation. In addition, repackaging and temporary storage operations may be performed prior to such pre-treatment or prior to destruction or irreversible transformation pursuant to this part of this Annex.Part 2Wastes and operations to which Article 7(4)(b) appliesThe following operations are permitted for the purposes of Article 7(4)(b) in respect of the wastes specified, defined by the six-digit code as classified in Commission Decision 2000/532/ECCommission Decision 2000/532/EC of 3 May 2000 replacing Decision 94/3/EC establishing a list of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste and Council Decision 94/904/EC establishing a list of hazardous waste pursuant to Article 1(4) of Council Directive 91/689/EEC on hazardous waste (OJ L 226, 6.9.2000, p. 3). Decision as last amended by Council Decision 2001/573/EC (OJ L 203, 28.7.2001, p. 18).Pre-treatment operations prior to permanent storage pursuant to this part of this Annex may be performed, provided that a substance listed in Annex IV that is isolated from the waste during the pre-treatment is subsequently disposed of in accordance with Part 1 of this Annex. In addition, repackaging and temporary storage operations may be performed prior to such pre-treatment or prior to permanent storage pursuant to this part of this Annex.
These limits apply exclusively to a landfill site for hazardous waste and do not apply to permanent underground storage facilities for hazardous waste, including salt mines.Any waste marked with an asterisk "*" is considered as hazardous waste pursuant to Directive 2008/98/EC and is subject to the provisions of that Directive."Hexabromocyclododecane" means hexabromocyclododecane, 1,2,5,6,9,10-hexabromocyclododecane and its main diastereoisomers: alpha- hexabromocyclododecane, beta- hexabromocyclododecane and gamma- hexabromocyclododecane.The calculation method laid down in European standards EN 12766-1 and EN 12766-2 shall apply.Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste (OJ L 182, 16.7.1999, p. 1).Council Decision 2003/33/EC of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC (OJ L 11, 16.1.2003, p. 27).
Wastes as classified in Commission Decision 2000/532/ECMaximum concentration limits of substances listed in Annex IVOperation
10WASTES FROM THERMAL PROCESSESAlkanes C10-C13, chloro (short-chain chlorinated paraffins) (SCCPs): 10000 mg/kg;Aldrin: 5000 mg/kg;Chlordane: 5000 mg/kg;Chlordecone: 5000 mg/kg;DDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane): 5000 mg/kg;Dieldrin: 5000 mg/kg;Endosulfan: 5000 mg/kg;Endrin: 5000 mg/kg;Heptachlor: 5000 mg/kg;Hexabromobiphenyl: 5000 mg/kg;Hexabromocyclododecane: 1000 mg/kg;Hexachlorobenzene: 5000 mg/kg;Hexachlorobutadiene: 1000 mg/kg;Hexachlorocyclohexanes, including lindane: 5000 mg/kg;Mirex: 5000 mg/kg;Pentachlorobenzene: 5000 mg/kg;Perfluorooctane sulfonic acid and its derivatives (PFOS) (C8F17SO2X) (X = OH, Metal salt (O-M+), halide, amide, and other derivatives including polymers): 50 mg/kg;Polychlorinated Biphenyls (PCB): 50 mg/kg;Polychlorinated dibenzo-p-dioxins and dibenzofurans: 5 mg/kg;Polychlorinated naphthalenes (*): 1000 mg/kg;Sum of the concentrations of tetrabromodiphenyl ether C12H6Br4O), pentabromodiphenyl ether (C12H5Br5O), hexabromodiphenyl ether (C12H4Br6O)and heptabromodiphenyl ether (C12H3Br7O): 10000 mg/kg;Toxaphene: 5000 mg/kg.Permanent storage shall be allowed only when all the following conditions are met:(1)The storage takes place in one of the following locations:safe, deep, under-ground, hard rock formations,salt mines,a landfill site for hazardous waste, provided that the waste is solidified or partly stabilised where technically feasible as required for classification of the waste in subchapter 19 03 of Decision 2000/532/EC.(2)The provisions of Council Directive 1999/31/EC and Council Decision 2003/33/EC were respected.(3)It has been demonstrated that the selected operation is environmentally preferable.
10 01Wastes from power stations and other combustion plants (except 19)
10 01 14 *Bottom ash, slag and boiler dust from co-incineration containing hazardous substances
10 01 16 *Fly ash from co-incineration containing hazardous substances
10 02Wastes from the iron and steel industry
10 02 07 *Solid wastes from gas treatment containing hazardous substances
10 03Wastes from aluminium thermal metallurgy
10 03 04 *Primary production slags
10 03 08 *Salt slags from secondary production
10 03 09 *Black drosses from secondary production
10 03 19 *Flue-gas dust containing hazardous substances
10 03 21 *Other particulates and dust (including ball-mill dust) containing hazardous substances
10 03 29 *Wastes from treatment of salt slags and black drosses containing hazardous substances
10 04Wastes from lead thermal metallurgy
10 04 01 *Slags from primary and secondary production
10 04 02 *Dross and skimmings from primary and secondary production
10 04 04 *Flue-gas dust
10 04 05 *Other particulates and dust
10 04 06 *Solid wastes from gas treatment
10 05Wastes from zinc thermal metallurgy
10 05 03 *Flue-gas dust
10 05 05 *Solid waste from gas treatment
10 06Wastes from copper thermal metallurgy
10 06 03 *Flue-gas dust
10 06 06 *Solid wastes from gas treatment
10 08Wastes from other non-ferrous thermal metallurgy
10 08 08 *Salt slag from primary and secondary production
10 08 15 *Flue-gas dust containing hazardous substances
10 09Wastes from casting of ferrous pieces
10 09 09 *Flue-gas dust containing hazardous substances
16WASTES NOT OTHERWISE SPECIFIED IN THE LIST
16 11Waste linings and refractories
16 11 01 *Carbon-based linings and refractories from metallurgical processes containing hazardous substances
16 11 03 *Other linings and refractories from metallurgical processes containing hazardous substances
17CONSTRUCTION AND DEMOLITION WASTES (INCLUDING EXCAVATED SOIL FROM CONTAMINATED SITES)
17 01Concrete, bricks, tiles and ceramics
17 01 06 *Mixtures of, or separate fractions of concrete, bricks, tiles and ceramics containing hazardous substances
17 05Soil (including excavated soil from contaminated sites), stones and dredging spoil
17 05 03 *Soil and stones containing hazardous substances
17 09Other construction and demolition wastes
17 09 02 *Construction and demolition wastes containing PCB, excluding PCB containing equipment
17 09 03 *Other construction and demolition wastes (including mixed wastes) containing hazardous substances
19WASTES FROM WASTE MANAGEMENT FACILITIES, OFF-SITE WASTE WATER TREATMENT PLANTS AND THE PREPARATION OF WATER INTENDED FOR HUMAN CONSUMPTION AND WATER FROM INDUSTRIAL USE
19 01Wastes from incineration or pyrolysis of waste
19 01 07 *Solid wastes from gas treatment
19 01 11 *Bottom ash and slag containing hazardous substances
19 01 13 *Fly ash containing hazardous substances
19 01 15 *Boiler dust containing hazardous substances
19 04Vitrified waste and waste from vitrification
19 04 02 *Fly ash and other flue-gas treatment wastes
19 04 03 *Non-vitrified solid phase
The maximum concentration limit of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD and PCDF) shall be calculated according to the following toxic equivalency factors (TEFs):
PCDDTEF
2,3,7,8-TeCDD1
1,2,3,7,8-PeCDD1
1,2,3,4,7,8-HxCDD0,1
1,2,3,6,7,8-HxCDD0,1
1,2,3,7,8,9-HxCDD0,1
1,2,3,4,6,7,8-HpCDD0,01
OCDD0,0003
PCDFTEF
2,3,7,8-TeCDF0,1
1,2,3,7,8-PeCDF0,03
2,3,4,7,8-PeCDF0,3
1,2,3,4,7,8-HxCDF0,1
1,2,3,6,7,8-HxCDF0,1
1,2,3,7,8,9-HxCDF0,1
2,3,4,6,7,8-HxCDF0,1
1,2,3,4,6,7,8-HpCDF0,01
1,2,3,4,7,8,9-HpCDF0,01
OCDF0,0003
Loading ...