Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
Modified by
Directive 2003/44/EC of the European Parliament and of the Councilof 16 June 2003amending Directive 94/25/EC on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft(Text with EEA relevance), 32003L0044, August 26, 2003
Regulation (EC) No 1882/2003 of the European Parliament and of the Councilof 29 September 2003adapting to Council Decision 1999/468/EC the provisions relating to committees which assist the Commission in the exercise of its implementing powers laid down in instruments subject to the procedure referred to in Article 251 of the EC Treaty, 32003R1882, October 31, 2003
Regulation (EC) No 1137/2008 of the European Parliament and of the Councilof 22 October 2008adapting a number of instruments subject to the procedure laid down in Article 251 of the Treaty to Council Decision 1999/468/EC, with regard to the regulatory procedure with scrutinyAdaptation to the regulatory procedure with scrutiny — Part One, 32008R1137, November 21, 2008
Regulation (EU) No 1025/2012 of the European Parliament and of the Councilof 25 October 2012on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council(Text with EEA relevance), 32012R1025, November 14, 2012
Corrected by
Corrigendum to Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of that Member States relating to recreational craft, 31994L0025R(01), June 10, 1995
Corrigendum to Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft, 31994L0025R(03), February 15, 2000
Directive 94/25/EC of the European Parliament and of the Councilof 16 June 1994on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craftTHE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty establishing the European Community, and in particular Article 100a thereof,Having regard to the proposal from the CommissionOJ No C 123, 15. 5. 1992, p. 7.,Having regard to the opinion of the Economic and Social CommitteeOJ No C 313, 30. 11. 1992, p. 38.,Acting in accordance with the procedure laid down in Article 189b of the TreatyOpinion of the European Parliament of 16 November 1992 (OJ No C 337, 21. 12. 1992, p. 17); Council common position of 16 December 1993 (OJ No C 137, 19. 5. 1994, p. 1); Decision of the European Parliament of 9 March 1994 (OJ No C 91, 28. 3. 1994).,Whereas the internal market is to comprise an area without internal frontiers in which the free movement of goods, persons, services and capital is ensured;Whereas the laws, regulations and administrative provisions in force in the various Member States relating to the safety characteristics of recreational craft differ in scope and content; whereas such disparities are liable to create barriers to trade and unequal conditions of competition within the internal market;Whereas harmonization of national legislation is the only way in which to remove these barriers to free trade; whereas this objective cannot be satisfactorily achieved by the individual Member States; whereas this Directive merely lays down the requirements vital to freedom of movement for recreational craft;Whereas this Directive should cover only recreational craft of a minimum length of 2,5 m and a maximum length of 24 m, derived from the ISO standards;Whereas the removal of technical barriers in the field of recreational craft and their components, to the extent that they cannot be removed by mutual recognition of equivalence among all the Member States, should follow the new approach set out in the Council resolution of 7 May 1985OJ No C 136, 4. 6. 1985, p. 1. which calls for the definition of essential requirements on safety and other aspects which are important for the general well-being; whereas paragraph 3 of Article 100a provides that, in its proposals, concerning health, safety, environmental protection and consumer protection, the Commission will take as a base a high level of protection; whereas the essential requirements constitute the criteria with which recreational craft, partly completed craft and their components when separate and when installed must comply;Whereas, therefore, this Directive sets out essential requirements only; whereas, in order to facilitate the task of proving compliance with the essential requirements, harmonized European standards are necessary for recreational craft and their components as referred to in Annex II; whereas harmonized European standards are drawn up by private bodies and must retain their non-mandatory status; whereas, for this purpose, the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) are recognized as the bodies competent to adopt harmonized standards which follow the general guidelines for cooperation between the Commission and those two bodies, signed on 13 November 1984; whereas, for the purposes of this Directive, a harmonized standard is a technical specification (European Standard or harmonization document) adopted by one or other of those bodies, or by both, at the prompting of the Commission pursuant to Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provision of information in the field of technical standards and regulationsOJ No L 109, 26. 4. 1983, p. 8. Directive as last amended by Directive 88/182/EEC (OJ No L 81, 26. 3. 1988, p. 75). and pursuant to the general guidelines referred to above;Whereas, in view of the nature of the risks involved in the use of recreational craft and their components, it is necessary to establish procedures applying to the assessment of compliance with the essential requirements of the Directive; whereas these procedures must be devised in the light of the level of risk which may be inherent in recreational craft and their components; whereas, therefore, each category of conformity must be supplemented by an appropriate procedure or a choice between several equivalent procedures; whereas the procedures adopted comply with Council Decision 93/465/EEC of 22 July 1993 concerning the modules for the various phases of the conformity assessment procedures and the rules for the affixing and use of the CE conformity marking which are intended to be used in the technical harmonization DirectivesOJ No L 220, 30. 8. 1993, p. 23.;Whereas the Council has provided for the affixing of the CE marking by either the manufacturer or his authorized representative within the Community; whereas that mark means that the recreational craft and components comply with all the essential requirements and assessment procedures provided for by the Community law applying to the product;Whereas it is appropriate that the Member States, as provided for by Article 100a (5) of the Treaty, may take provisional measures to limit or prohibit the placing on the market and the use of recreational craft or constituent products thereof in cases where they present a particular risk to the safety of persons and, where appropriate, domestic animals or property, provided that the measures are subject to a Community control procedure;Whereas the recipients of any decision taken as part of this Directive must be aware of the reasons behind that decision and the means of appeal open to them;Whereas it is necessary to provide for a transitional arrangement enabling recreational craft and their components manufactured in compliance with the national regulations in force at the date of adoption of this Directive to be marketed and placed in service;Whereas this Directive does not contain any provisions directed towards limiting the use of the recreational craft after it has been put into service;Whereas the construction of recreational craft may have an impact on the environment to the extent that the craft may discharge polluting substances; whereas it is therefore necessary to include provisions on the protection of the environment in the Directive, in so far as those provisions concern the construction of recreational craft from the point of view of its direct impact on the environment;Whereas the provisions of this Directive should not affect Member States' entitlement to lay down, in accordance with the Treaty, such requirements as they may deem necessary concerning navigation on certain waters for the purpose of protection of the environment, the fabric of waterways and ensuring safety on waterways, provided that this does not mean that the recreational craft is modified in a way not specified in this Directive,HAVE ADOPTED THIS DIRECTIVE: