Article 11.This Directive is a specific directive within the meaning of Article 3 of Directive 89/109/EEC.2.This Directive shall apply to regenerated cellulose film within the meaning of the description given in Annex I which either:(a)constitutes a finished product in itself; or(b)forms part of a finished product containing other materials,and which is intended to come into contact with foodstuffs or which, by virtue of its purpose, does come into such contact.3.This Directive does not apply to:(a)regenerated cellulose film which, on the side intended to come into contact with foodstuffs or which, by virtue of its purpose does come into such contact, has a coating exceeding 50 mg/dm2;(b)synthetic casings of regenerated cellulose.

Article 1aThe regenerated cellulose films referred to in Article 1(2) shall belong to one of the following types:(a)uncoated regenerated cellulose film;(b)coated regenerated cellulose film with coating derived from cellulose;or(c)coated regenerated cellulose film with coating consisting of plastics.

Article 21.Regenerated cellulose films referred to in points (a) and (b) of Article 1a shall be manufactured using only substances or groups of substances listed in Annex II subject to the restrictions set out therein.2.By way of derogation from paragraph 1, substances other than those listed in Annex II may be used when these substances are employed as colouring matter (dyes and pigments) or as adhesives, provided that there is no trace of migration of the substances into or onto foodstuffs, detectable by a validated method.

Article 2a1.Regenerated cellulose film referred to in Article 1a(c) shall be manufactured, prior to coating, using only substances or groups of substances listed in the first part of Annex II, subject to the restrictions set out therein.2.The coating to be applied to the regenerated cellulose film referred to in paragraph 1 shall be manufactured using only substances or groups of substances listed in Annexes II to VI to Directive 2002/72/EC, subject to the restrictions set out therein.3.Without prejudice to paragraph 1, materials and articles made of regenerated cellulose film referred to in Article 1a(c) shall comply with Articles 2, 7 and 8 of Directive 2002/72/EC.

Article 3Printed surfaces of regenerated cellulose film shall not come into contact with the foodstuffs.

Article 41.At the marketing stages other than the retail stages, materials and articles made of regenerated cellulose film intended to come into contact with foodstuffs shall be accompanied by a written declaration in accordance with Article 6 (5) of Directive 89/109/EEC.2.Paragraph 1 does not apply to materials and articles made of regenerated cellulose film which by their nature are clearly intended to come into contact with foodstuffs.3.Where special conditions of use are indicated, the material or article made of regenerated cellulose film shall be labelled accordingly.

Article 51.Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive as from 1 January 1994. They shall immediately inform the Commission thereof.Member States shall:permit, as from 1 January 1994, the trade in and use of regenerated cellulose film which is intended to come into contact with foodstuffs complying with this Directive,prohibit, as from 1 January 1994, the trade in and use of regenerated cellulose film which is intended to come into contact with foodstuffs and which complies with neither this Directive nor Directive 83/229/EEC, other than film which Directive 92/15/EEC prohibits as from 1 July 1994,prohibit, as from 1 January 1995, the trade in and use of regenerated cellulose film which is intended to come into contact with foodstuffs and which does not comply with this Directive but did comply with Directive 83/229/EEC.2.When Member States adopt the measures referred to in paragraph 1, these shall contain a reference to this Directive or shall be accompanied by such reference at the time of their official publication. The procedure for such reference shall be adopted by Member States.

Article 61.Directive 83/229/EEC is hereby repealed as from 1 January 1994.2.References to Directive 83/229/EEC shall be construed as references to this Directive and should be read in accordance with the correlation table appearing in Annex III.

Article 7This Directive is addressed to the Member States.

nullANNEX IDESCRIPTION OF REGENERATED CELLULOSE FILMRegenerated cellulose film is a thin sheet material obtained from a refined cellulose derived from unrecycled wood or cotton. To meet technical requirements, suitable substances may be added either in the mass or on the surface. Regenerated cellulose film may be coated on one or both sides.ANNEX IILIST OF SUBSTANCES AUTHORIZED IN THE MANUFACTURE OF REGENERATED CELLULOSE FILMNBThe percentages in this Annex, first and second parts, are expressed in weight/weight (w/w) and are calculated in relation to the quantity of anhydrous uncoated regenerated cellulose film.The usual technical denominations are given in square brackets.The substances used shall be of good technical quality as regards the purity criteria.FIRST PART

UNCOATED REGENERATED CELLULOSE FILMB.Additives

Denominations	Restrictions
A.Regenerated cellulose	Not less than 72 % (w/w)
1.Softeners	Not more than 27 % (w/w) in total
—Bis (2-hydroxyethyl) ether [= diethyleneglycol])	Only for films intended to be coated and then used for foodstuffs which are not moist, i.e. which do not contain water which is physically free at the surface. The total amount of bis(2 hydroxyethyl)ether and ethanediol present in foodstuffs that have been in contact with film of this type may not exceed 30 mg/kg of the foodstuff.
—Ethanediol [= monoethyleneglycol]
—1,3-butanediol
—Glycerol
—1,2-propanediol [= 1,2 propyleneglycol]
—Polyethylene oxide [= polyethyleneglycol]	Average molecular weight between 250 and 1200
—1,2-polypropylene oxide [= 1,2 polypropyleneglycol]	Average molecular weight not greater than 400 and free 1,3-propanediol content not greater than 1 % (w/w) in substance
—Sorbitol
—Tetraethyleneglycol
—Triethyleneglycol
—Urea
2.Other additives	Not more than 1 % (w/w) in total
First class	The quantity of the substance or group of substances in each indent may not exceed 2 mg/dm2 of the uncoated film
—Acetic acid and its NH4, Ca, Mg, K and Na salts
—Ascorbic acid and its NH4, Ca, Mg, K and Na salts
—Benzoic acid and sodium benzoate
—Formic acid and its NH4, Ca, Mg, K and Na salts
—Linear fatty acids, saturated or unsaturated, with an even number of carbo atoms from 8 to 20 inclusive and also behenic and ricinoleic acids and the NH4, Ca, Mg, K, Na, Al, Zn salts of these acids
—Citric, d and l lactic, maleic, l-tartaric acids and their Na and K salts
—Sorbic acid and its NH4, Ca, Mg, K and Na salts
—Amides of linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive and also the amides of behenic and ricinoleic acids
—Natural edible starches and flours
—Edible starches and flours modified by chemical treatment
—Amylose
—Calcium and magnesium carbonates and chlorides
—Esters of glycrol with linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive and/or with adipic, citric, 12-hydroxystearic (oxystearin), ricinoleic acids
—Esters of polyoxyethylene (8 to 14 oxyethylene groups) with linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive
—Esters of sorbitol with linear fatty acids, saturated or unsaturated, with an even number of carton atoms from 8 to 20 inclusive
—Mono-and/or di-esters of stearic acid with ethanediol and/or bis (2-hydroxyethyl) ether and/or triethylene glycol
—Oxides and hydroxides of aluminium, calcium, magnesium and silicon and silicates and hydrated silicates of aluminium, calcium, magnesium and potassium
—Polyethylene oxide [= polyethyleneglycol]	Average molecular weight between 1200 and 4000
—Sodium propionate
Second class	The total quantity of the substances may not exceed 1 mg/dm2 of the uncoated film and the quantity of the substance or group of substances in each indent may not exceed 0,2 mg/dm2 (or a lower limit where one is specified) of the uncoated film
—Sodium alkyl (C8 to C18) benzene sulphonate
—Sodium isopropyl naphthalene sulphonate
—Sodium alkyl (C8-C18) sulphate
—Sodium alkyl (C8-C18) sulphonate
—Sodium dioctylsulphosuccinate
—Distearate of dihydroxyethyl diethylene triamine monoacetate	Not more than 0,05 mg/dm2 of the uncoated film
—Ammonium, magnesium and potassium lauryl sulphates
—N,N′-distearoyl diaminoethane, N,N′-dipalmitoyl diaminoethane and N,N′-dioleoyl diaminoethane
—2-heptadecyl—4,4-bis(methylene-stearate) oxazoline
—Polyethylene-aminostearamide ethylsulphate	Not more than 0,1 mg/dm2 of the uncoated film
Third class — Anchoring agent	The total quantity of substances may not exceed 1 mg/dm2 of the uncoated film
—Condensation product of melamine-formaldehyde unmodified, or which may be modified with one or more of the following products:butanol, diethylenetriamine, ethanol, triethylenetetramine, tetraethylenepentamine, tri-(2-hydroxyethyl) amine, 3,3′-diaminodipropylamine, 4,4′-diaminodibutylamine	Free formaldehyde content not greater than 0,5 mg/dm2 of the uncoated filmFree melamine content not greater than 0,3 mg/dm2 of the uncoated film
—Condensation product of melamine-urea-formaldehyde modified with tris-(2-hydroxyethyl)amine	Free formaldehyde content not greater than 0,5 mg/dm2 of the uncoated film.Free melamine content not greater than 0,3 mg/dm2 of the uncoated film
—Cross-linked cationic polyalkyleneamines:(a)polyamide-epichlorhydrin resin based on diaminopropylmethylamine and epichlorhydrin(b)polyamide-epichlorhydrin resin based on epichlorhydrin, adipic acid, caprolactam, diethylenetriamine and/or ethylenediamine(c)polyamide-epichlorhydrin resin based on adipic acid, diethylenetriamine and epichlorhydrin, or a mixture of epichlorhydrin and ammonia(d)polyamide-polyamine-epichlorhydrin resin based on epichlorhydrin, dimethyl adipate and diethylenetriamine(e)polyamide-polyamine-epichlorhydrin resin based on epichlorhydrin, adipamide and diaminopropylmethylamine	In accordance with Community directives and in their absence, with national legislation, pending the adoption of Community directives
—Polyethyleneamines and polyethyleneimines	Not more than 0,75 mg/dm2 of the uncoated film
—Condensation product of urea-formaldehyde unmodified, or which may be modified with one or of the following products:aminomethylsulphonic acid, sulphanilic acid, butanol, diaminobutane, diaminodiethylamine, diaminodipropylamine, diaminopropane, diethylenetriamine, ethanol, guanidine, methanol, tetraethylenepentamine, triethylenetetramine, sodium sulphite	Free formaldehyde content not greater than 0,5 mg/dm2 of the uncoated film
Fourth class	The total quantity of substances may not exceed 0,01 mg/dm2 of the uncoated film
—Products resulting from the reaction of the amines of edible oils with polyethylene oxide
—Monoethanolamine lauryl sulphate

SECOND PART

COATED REGENERATED CELLULOSE FILM

Denominations	Restrictions
A.Regenerated cellulose	See first part
B.Additives	See first part
C.Coating	Not more than 50 mg of coating/dm2 of film on the side in contact with foodstuffs
1.Polymers	The total quantity of substances may not exceed 50 mg/dm2 of the coating on the side in contact with foodstuffs
—Ethyl, hydroxyethyl, hydroxypropyl and methyl ethers of cellulose
—Cellulose nitrate	Not more than 20 mg/dm2 of the coating on the side in contact with foodstuffs; nitrogen content between 10,8 % (w/w) and 12,2 % (w/w) in the cellulose nitrate
—Polymers, copolymers and their mixtures made with the following monomers:vinyl acetals derived from saturated aldehydes (C1 to C6)vinyl acetatealkyl (C1 to C4) vinyl ethersacrylic, crotonic, itaconic, maleic, methacrylic acids and their estersbutadienestyrenemethylstyrenevinylidene chlorideacrylonitrilemethacrylonitrileethylene, propylene, 1- and 2-butylene	In accordance with Community directives, and, in their absence, with national legislation pending the adoption of Community directives
vinyl chloride	According to Directive 78/142/EEC(OJ No L 44, 15. 2. 1978, p. 15)
2.Resins	The total quantity of substances may not exceed 12,5 mg/dm2 of the coating on the side in contact with foodstuffs and solely for the preparation of regenerated cellulose films with cellulose nitrate based coatings
—Casein
—Colophony and/or its products of polymerization, hydrogenation, or disproportionation and their esters of methyl, ethyl or C2 to C6 polyvalent alcohols, or mixtures of these alcohols
—Colophony and/or its products of polymerization, hydrogenation, or disproportionation condensed with acrylic, maleic, citric, fumaric and/or phthalic acids and/or 2,2 bis (4-hydroxyphenyl) propane formaldehyde and esterified with methyl ethyl or C2 to C6 polyvalent alcohols or mixtures of these alcohols
—Esters derived from bis(2-hydroxyethyl) ether with addition products of betapinene and/or dipentene and/or diterpene and maleic anhydride
—Edible gelatine
—Castor oil and its products of dehydration or hydrogenation and its condensation products with polyglycerol, adipic, citric, maleic, phthalic and sebacic acids
—Natural gum [= damar]
—Poly-beta-pinene [= terpenic resins]
—Urea-formaldehyde resins (see anchoring agents)
3.Plasticizers	The total quantity of substances may not exceed 6 mg/dm2 of the coating on the side in contact with foodstuffs
—Acetyl tributyl citrate
—Acetyl tri(2-ethylhexyl) citrate
—Di-isobutyl adipate
—Di-n-butyl adipate
—Di-n-hexyl azelate
—Butylbenzylphthalate	Not more than 2,0 mg/dm2 of the coating on the side in contact with foodstuffs
—Di-n-butyl phthalate	Not more than 3,0 mg/dm2 of the coating on the side in contact with foodstuffs
—Dicyclohexyl phthalate	Not more than 4,0 mg/dm2 of the coating on the side in contact with foodstuffs
—2-ethylhexyl diphenyl phosphate (synonym: phosphoric acid diphenyl 2-ethylhexyl ester)	The amount of 2-ethylhexyl diphenyl phosphate shall not exceed:(a)2,4 mg/kg of the foodstuff in contact with this type of film, or(b)0.4 mg/dm2 in the coating on the side in contact with foodstuffs
—Glycerol monoacetate [= monoacetin]
—Glycerol diacetate [= diacetin]
—Glycerol triacetate [= triacetin]
—Di-butyl sebacate
—Di(2-ethylhexal) sebacate [= dioctylsebacate]
—Di-n-butyl tartrate
—Di-isobutyl tartrate
4.Other additives	The total quantity of substances may not exceed 6 mg/dm2 in the uncoated regenerated cellulose film, inclusive of the coating on the side in contact with foodstuffs
4.1.Additives listed in the first part	Same restrictions as in the first part (however the quantities in mg/dm2 refer to the uncoated regenerated cellulose film, inclusive of the coating on the side in contact with foodstuffs)
4.2.Specific coating additives:	The quantity of the substance or group of substances in each indent may not exceed 2 mg/dm2 (or a lower limit where one is specified) of the coating on the side in contact with foodstuffs
—1-hexadecanol and 1-octadecanol
—Esters of linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive and of ricinoleic acid with ethyl, butyl, amyl and oleyl linear alcohols
—Montan waxes, comprising purified montanic (C26 to C32) acids and/or their esters with ethanediol and/or 1,3 butanediol and/or their calcium and potassium salts
—Carnauba wax
—Beeswax
—Esparto wax
—Candelilla wax
—Dimethylpolysiloxane	Not more than 1 mg/dm2 of the coating on the side in contact with foodstuffs
—Epoxidized soya-bean oil (oxirane content 6 to 8 %)
—Refined paraffin and microcrystalline waxes
—Pentaerythritol tetrastearate
—Mono and bis(octadecyldiethyleneoxide)-phosphates	Not more than 0,2 mg/dm2 of the coating on the side in contact with foodstuffs
—Aliphatic acids (C8 to C20) esterified with mono- or di-(2-hydroxyethyl)amine
—2- and 3-tert.butyl-4-hydroxyanisole [= butylated hydroxyanisole — BHA]	Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs
—2,6-di-tert.butyl-4-methylphenol [= butylated hydroxytoluene — BHT]	Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs
—Di-n-octyltin-bis(2-ethylhexyl) maleate	Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs
5.Solvents	The total quantity of substances may not exceed 0,6 mg/dm2 of the coating on the side in contact with foodstuffs
—Butyl acetate
—Ethyl acetate
—Isobutyl acetate
—Isopropyl acetate
—Propyl acetate
—Acetone
—1-butanol
—Ethanol
—2-butanol
—2-propanol
—1-propanol
—Cyclohexane
—Ethyleneglycol monobutyl ether
—Ethyleneglycol monobutyl ether acetate
—Ethyleneglycol monoethyl ether
—Ethyleneglycol monoethyl ether acetate
—Ethyleneglycol monomethyl ether
—Ethyleneglycol monomethyl ether acetate
—Methyl ethyl ketone
—Methyl isobutyl ketone
—Tetrahydrofuran
—Toluene	Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs.

ANNEX III

CORRELATION TABLE

Directive 83/229/EEC	Present Directive
Article 1	Article 1
Article 2	Article 2
Article 3	Article 3
Article —	Article 4
Article 4 (1)	Article 5
Article 4 (2)	Article —
Article —	Article 6
Article 5	Article 7

Commission Directive 93/10/EEC of 15 March 1993 relating to materials and articles made of regenerated cellulose film intended to come into contact with foodstuffs