Council Directive 87/404/EEC of 25 June 1987 on the harmonization of the laws of the Member States relating to simple pressure vessels
Modified by
Council Directiveof 17 September 1990amending Directive 87/404/EEC on the harmonization of the laws of the Member States relating to simple pressure vessels(90/488/EEC), 31990L0488, October 2, 1990
Council Directive 93/68/EECof 22 July 1993amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (non-automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC (new hot-water boilers fired with liquid or gaseous fuels) and 73/23/EEC (electrical equipment designed for use within certain voltage limits), 31993L0068, August 30, 1993
Directive 2009/105/EC of the European Parliament and of the Councilof 16 September 2009relating to simple pressure vessels(codified version)(Text with EEA relevance), 32009L0105, October 8, 2009
Council Directiveof 25 June 1987on the harmonization of the laws of the Member States relating to simple pressure vessels(87/404/EEC)THE COUNCIL OF THE EUROPEAN COMMUNITIES,Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,Having regard to the proposal from the CommissionOJ No C 89, 15. 4. 1986, p. 2.,Having regard to the opinion of the European ParliamentOJ No C 190, 20. 7. 1987.,Having regard to the opinion of the Economic and Social CommitteeOJ No C 328, 22. 12. 1986, p. 20.,Whereas Member States have the responsibility of ensuring the safety on their territory of persons, domestic animals and property with regard to the hazards resulting from the leakage or bursting of simple pressure vessels;Whereas, in each Member State, mandatory provisions define in particular the safety level required of simple pressure vessels by specifying design and operating characteristics, conditions of installation and use and inspection procedures before and after placing on the market; whereas these mandatory provisions do not necessarily lead to different safety levels from one Member State to another but do, by their disparity, hinder trade within the Community;Whereas the national provisions ensuring such safety must be harmonized in order to guarantee the free movement of simple pressure vessels without lowering existing and justified levels of protection in the Member States;Whereas Community legislation as it stands at present provides that, notwithstanding one of the fundamental rules of the Community, namely the free movement of goods, barriers to intra-Community movement resulting from disparities in national laws on the marketing of products have to be accepted in so far as those provisions may be recognized as necessary to satisfy essential requirements; whereas the harmonization of laws in the present case must therefore be confined to those provisions needed to satisfy the essential safety requirements for simple pressure vessels; whereas, because they are essential, these requirements must replace the corresponding national provisions;Whereas this Directive therefore contains only mandatory and essential requirements; whereas, to facilitate proof of conformity with the essential requirements, it is necessary to have harmonized standards at European level in particular as to the design, operation and installation of simple pressure vessels so that products complying with them may be assumed to conform to the safety requirements; whereas these standards harmonized at European level are drawn up by private bodies and must remain non-mandatory texts; whereas for that purpose the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (CENELEC) are recognized as the competent bodies for the adoption of harmonized standards in accordance with the general guidelines for cooperation between the Commission and those two bodies signed on 13 November 1984; whereas, for the purposes of this Directive, a harmonized standard is a technical specification (European standard or harmonization document) adopted by one or both of those bodies upon a remit from the Commission in accordance with the provisions of Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provision of information in the field of technical standards and regulationsOJ No L 109, 26. 4. 1983, p. 8. and the abovementioned general guidelines;Whereas a check on compliance with the relevant technical requirements is necessary to provide effective protection for users and third parties; whereas the existing inspection procedures differ from one Member State to another; whereas, in order to avoid multiple inspections, which are in effect barriers to the free movement of vessels, arrangements should be made for the mutual recognition of inspection procedures by the Member States; whereas, in order to facilitate the mutual recognition of inspection procedures, harmonized Community procedures should be set up and the criteria for appointing the bodies responsible for carrying out tests, surveillance and verification should be harmonized;Whereas the presence on a simple pressure vessel of the CE marking indicates that it satisfies the provisions of this Directive and therefore makes it unnecessary, on import and placing into service of the vessel, to repeat the inspections already carried out; whereas nevertheless simple pressure vessels might represent a safety hazard; whereas provision should therefore be made for a procedure to reduce this hazard,HAS ADOPTED THIS DIRECTIVE: