Council Directive 86/298/EEC of 26 May 1986 on rear- mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors
Modified by
  • Actconcerning the conditions of accession of the Kingdom of Norway, the Republic of Austria, the Republic of Finland and the Kingdom of Sweden and the adjustments to the Treaties on which the European Union is founded(94/C 241/08) Decision of the Council of the European Unionof 1 January 1995adjusting the instruments concerning the accession of new Member States to the European Union(95/1/EC, Euratom, ECSC), 194N395D0001, August 29, 1994
  • Decision of the Council of the European Unionof 1 January 1995adjusting the instruments concerning the accession of new Member States to the European Union(95/1/EC, Euratom, ECSC), 395D0001, January 1, 1995
  • Council Directiveof 21 December 1989amending Directive 86/298/EEC on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors(89/682/EEC) Corrigendum to Council Directive 89/682/EEC of 21 December 1989 amending Directive 86/298/EEC on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors(Official Journal of the European Communities L 398 of 30 December 1989), 389L0682389L0682R(01), December 30, 1989
  • Commission Directive 2000/19/ECof 13 April 2000adapting to technical progress Council Directive 86/298/EEC on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors(Text with EEA relevance), 300L0019, April 14, 2000
  • Actconcerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded, 103T, September 23, 2003
  • Commission Directive 2005/67/ECof 18 October 2005amending, for the purposes of their adaptation, Annexes I and II to Council Directive 86/298/EEC, Annexes I and II to Council Directive 87/402/EEC and Annexes I, II and III to Directive 2003/37/EC of the European Parliament and of the Council, relating to the type-approval of agricultural or forestry tractors(Text with EEA relevance), 305L0067, October 19, 2005
  • Council Directive 2006/96/ECof 20 November 2006adapting certain Directives in the field of free movement of goods, by reason of the accession of Bulgaria and Romania, 306L0096, December 20, 2006
Corrected by
  • Corrigendum to Council Directive 86/298/EEC of 26 May 1986 on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors, 386L0298R(01), July 5, 1988
  • Corrigendum to Council Directive 89/682/EEC of 21 December 1989 amending Directive 86/298/EEC on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors, 389L0682R(01), June 9, 2005
Council Directiveof 26 May 1986on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors(86/298/EEC) THE COUNCIL OF THE EUROPEAN COMMUNITIES, Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof, Having regard to the proposal from the CommissionOJ No C 123, 9. 5. 1983, p. 1., Having regard to the opinion of the European ParliamentOJ No C 307, 14. 11. 1983, p. 103., Having regard to the opinion of the Economic and Social CommitteeOJ No C 286, 24. 10. 1983, p. 2., Whereas Council Directive 74/150/EEC of 4 March 1974 on the approximation of the laws of the Member States relating to the type-approval of wheeled agricultural or forestry tractorsOJ No L 84, 28. 3. 1974, p. 10., as last amended by the Act of Accession of Spain and Portugal, lays down that the necessary provisions for the implementation of the EEC type-approval procedure in respect of individual tractor parts or characteristics should be specified in special directives; whereas the provisions relating to roll-over protection structures and their attachments to tractors were laid down by Directives 77/536/EECOJ No L 220, 29. 8. 1977, p. 1. and 79/622/EECOJ No L 179, 17. 7. 1979, p. 1., as last amended by the Act of Accession of Spain and Portugal; whereas these two Directives cover respectively dynamic and static testing procedures — either of which may be employed by manufacturers for the present — and relate to standard tractors, that is, tractors having a maximum ground clearance of 1000 mm and a fixed or adjustable track width of one of the driving axles of not less than 1150 mm and weighing between 1,5 and 4,5 tonnes in the case of tractors covered by the "dynamic testing" Directive and not less than 800 kilograms in the case of tractors covered by the "static testing" Directive; Whereas the tractors covered by this Directive have a maximum ground clearance of 600 mm, a minimum track width of both axles of less than 1150 mm and a mass greater than 600 kilograms; whereas the roll-over protection structures of these tractors, which are used for specific activities, can be made subject to specific requirement or requirements other than those of Directive 77/536/EEC and 79/622/EEC; Whereas the technical requirements with which such "narrow-track" tractors must comply pursuant to national laws relate inter alia to roll-over protection structures and to their attachment to the tractor; whereas those requirements differ from one Member State to another; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules in order, in particular, to allow the EEC type-approval procedure which was the subject of Directive 74/150/EEC to be introduced in respect of each type of tractor; Whereas this Directive covers roll-over protection structures of the rear-mounted rollbar, frame or cab type having a zone of clearance whose upper limit is 900 mm above the seat reference point in order to provide a sufficiently large area or unobstructed space for the protection of the driver; whereas another special Directive will be adopted in respect of roll-over protection structures having two pillars mounted in front of the driver; Whereas a harmonized component type-approval procedure for roll-over protection structures and their attachment to the tractor makes it possible for each Member State to check compliance with the common construction and testing requirements and to inform the other Member States of its findings by sending them copies of the component type-approval certificate completed for each type of roll-over protection structure and its attachment to the tractor; whereas the placing of an EEC component type-approval mark on all structures manufactured in conformity with the approved type obviates any need for technical checks on those structures in the other Member States; whereas common requirements concerning other elements and characteristics of the roll-over protection structure, in particular, devices to prevent continuous roll-over if the tractor overturns, and protection of occupants, will be laid down at a later date; Whereas the harmonized requirements are intended principally to ensure safety on the road and at work throughout the Community; whereas, for this reason, it is necessary to introduce the obligation for tractors covered by this Directive to be fitted with roll-over protection structures; Whereas the approximation of the national laws relating to these tractors entails reciprocal recognition by Member States of the checks carried out by each of them on the basis of the common requirements, HAS ADOPTED THIS DIRECTIVE:
Loading ...