*****

COMMISSION REGULATION (EEC) No 3530/83

of 12 December 1983

concerning the procedure for determining the meat content in products falling within subheadings 16.02 B III a) 2 aa), bb) and cc) of the Common Customs Tariff

THE COMMISSION OF THE EUROPEAN

COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community,

Having regard to Council Regulation (EEC) No 97/69 of 16 January 1969 on measures to be taken for uniform application of the nomenclature of the Common Customs Tariff (1), as last amended by the Act of Accession of Greece, and in particular Article 3 thereof,

Whereas provisions are necessary to ensure the uniform application of the Common Customs Tariff nomenclature in regard to classification of prepared or preserved meat or meat offal containing meat or offal, of any kind, including fats of any kind or origin;

Whereas, in accordance with the provisions of subheadings 16.02 B III a) 2 aa), bb) and cc) of the Common Customs Tariff annexed to Council Regulation (EEC) No 950/68 (2), as last amended by Council Regulation (EEC) No 3333/83 (3), prepared meat or meat offal containing meat or offal, of any kind, including fats of any kind or origin are to be classified according to the percentage, by weight, of these ingredients;

Whereas it is necessary to define a procedure for determining the percentage, by weight, of meat or offal, of any kind, including fats of any kind or origin; whereas, on the basis of studies undertaken and experimental results obtained, the procedure set out in the Annex to this Regulation appear to offer the best safeguards;

Whereas the measures provided for in this Regulation are in accordance with the opinion of the Committee on Common Customs Tariff Nomenclature,

HAS ADOPTED THIS REGULATION:

Article 1

The percentage, by weight, of meat or offal, of any kind, including fats of any kind or origin of prepared meat or meat offal falling within subheadings 16.02 B III a) 2 aa), bb) and cc) of the Common Customs Tariff shall be determined according to the procedure set out in the Annex.

Article 2

This Regulation shall enter into force on the 21st day following its publication in the Official Journal of the European Communities.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 12 December 1983.

For the Commission

Karl-Heinz NARJES

Member of the Commission

(1) OJ No L 14, 21. 1. 1969, p. 1.

(2) OJ No L 172, 22. 7. 1968, p. 1.

(3) OJ No L 313, 14. 11. 1983, p. 1.

ANNEX

ANALYTICAL PROCEDURE

For the purposes of this Annex any reference to meat shall be taken to include offal, and the term 'overall meat content' includes meat as defined above and fats.

The overall meat content is determined as follows:

1. Analytical methods

1.1. Homogeneous and representative samples of the meat product must be prepared for the purposes of analysis.

1.2. Analytical methods to be used are as follows:

1.2.1. nitrogen: Determination of the nitrogen content in meat and meat products - ISO 937 - 1978,

1.2.2. moisture: Determination of the moisture content in meat and meat products - ISO 1442 - 1973,

1.2.3. fats: Determination of the total fat content in meat and meat products - ISO 1443 - 1973,

1.2.4. ash: Determination of the ash content in meat and meat products - ISO 936 - 1978.

1.3. The abovementioned ISO standard requirements concerning sampling are not binding for the purposes of the present Regulation.

2. Calculation of the overall meat content

The overall meat content in a product is calculated by means of the following formula:

1.2.3 // % of defatted meat DM = // NT - Nx f // × 100 // % meat total = // DM + F //

where

1.2 // NT // = total nitrogen determined by analysis (%) // Nx // = nitrogen of non-meat origin (%) // f // = average nitrogen content (%) in the fat-free meat contained in the product; the value of this factor is 3,5 for any kind of meat and mixtures of meat with the exception of: // // - products whose meat content consists solely of tongue for which the value of this factor is 3,0, // // - products whose meat content consists solely of kidney for which the value of this factor is 2,7 // F // = quantity of extractable fat (%) determined by analysis.

The total nitrogen and extractable fat content is determined by the methods mentioned in paragraphs 1.2.1 and 1.2.3. It is also possible to assess the ash (1.2.4) and moisture (1.2.2) content and to obtain, by deduction, the other ingredients.

In order to correct the value of nitrogen of non-meat origin (Nx factor), it would be necessary to know the quantity of each ingredient containing nitrogen as well as the nitrogen content of these ingredients.

The following table shows the nitrogen content of several typical ingredients of non-meat origin containing nitrogen, which are generally found in meat products.

1.2 // // // Non-meat products // % of nitrogen // // // Rusk // 2,0 // Casein // 15,8 // Sodium caseinate // 14,8 // Soya isolate // 14,5 // Textured soya // 8,0 // Soya flour // 8,0 // Monosodium glutamate (MSG) // 8,3 // //

As far as repeatability of analytical procedure is concerned, reference should be made to the relevant ISO standard.

The average result of at least two determinations must be taken into account.

Amendments and corrections
February 21, 1989	Repealed by 31989R0226
June 6, 1984	Corrected by 31983R3530R(01)
January 5, 1984	Entry into force - Date pub. + 21 See Art 2

Commission Regulation (EEC) No 3530/83 of 12 December 1983 concerning the procedure for determining the meat content in products falling within subheadings 16.02 B III a) 2 aa), bb) and cc) of the Common Customs Tariff