Council Directive 76/767/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to common provisions for pressure vessels and methods for inspecting them
Modified by
Actconcerning the conditions of accession of the Hellenic Republic and the adjustments to the Treaties, 179H, November 19, 1979
Actconcerning the conditions of accession of the Kingdom of Spain and the Portuguese Republic and the adjustments to the Treaties, 185I, November 15, 1985
Council Directiveof 25 June 1987amending certain directives on the approximation of the laws of the Member States relating to industrial products with respect to the distinctive numbers and letters indicating the Member States(87/354/EEC), 387L0354, July 11, 1987
Council Directiveof 21 December 1988amending several Directives concerning the approximation of the laws of Member States where there is provision in those Directives for publication in the Official Journal of the European Communities of attestations and certificates(88/665/EEC), 388L0665, December 31, 1988
Actconcerning the conditions of accession of the Kingdom of Norway, the Republic of Austria, the Republic of Finland and the Kingdom of Sweden and the adjustments to the Treaties on which the European Union is founded(94/C 241/08)
Decision of the Council of the European Unionof 1 January 1995adjusting the instruments concerning the accession of new Member States to the European Union(95/1/EC, Euratom, ECSC), 194N395D0001, August 29, 1994
Decision of the Council of the European Unionof 1 January 1995adjusting the instruments concerning the accession of new Member States to the European Union(95/1/EC, Euratom, ECSC), 395D0001, January 1, 1995
Council Regulation (EC) No 807/2003of 14 April 2003adapting to Decision 1999/468/EC the provisions relating to committees which assist the Commission in the exercise of its implementing powers laid down in Council instruments adopted in accordance with the consultation procedure (unanimity), 303R0807, May 16, 2003
Council Directive 2006/96/ECof 20 November 2006adapting certain Directives in the field of free movement of goods, by reason of the accession of Bulgaria and Romania, 306L0096, December 20, 2006
Council Directiveof 27 July 1976on the approximation of the laws of the Member States relating to common provisions for pressure vessels and methods of inspecting them(76/767/EEC)THE COUNCIL OF THE EUROPEAN COMMUNITIES,Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,Having regard to the proposal from the Commission,Having regard to the opinion of the European ParliamentOJ No C 2, 9. 1. 1974, p. 64.,Having regard to the opinion of the Economic and Social CommitteeOJ No C 101, 23. 11. 1973, p. 25.,Whereas in each Member State mandatory provisions determine the technical characteristics of construction, verification and/or the operation of pressure vessels; whereas these requirements differ from one Member State to another; whereas such differences hinder trade and may create unequal conditions of competition within the Community;Whereas these hindrances to the establishment and functioning of the common market can be reduced or indeed eliminated if the same requirements apply in each of the Member States, either in addition to or in lieu of their existing laws;Whereas a check on compliance with these technical requirements is necessary to provide effective protection for users and third parties; whereas the existing inspection procedures differ from one Member State to another; whereas in order to achieve free movement of pressure vessels within the common market and to avoid multiple inspections which are in effect barriers to the free movement of vessels, arrangements should be made for the mutual recognition of inspection procedures by the Member States;Whereas, in order to facilitate the mutual recognition of inspection procedures, adequate EEC pattern approval and EEC verification procedures for vessels should be set up and the criteria for appointing the bodies responsible for carrying out verifications should be harmonized;Whereas the presence on a pressure vessel of the EEC marks showing that it has undergone the appropriate inspections indicates that it satisfies the relevant technical requirements and therefore makes it unnecessary, on the importation and placing into service of the vessel, to repeat the inspections which have already been carried out;Whereas national regulations on pressure vessels cover many categories of pressure vessels of widely varying uses, capacities and pressures; whereas this Directive should lay down the general provisions dealing, in particular, with EEC pattern approval and verification procedures; whereas separate Directives for each category of vessel will lay down the technical requirements as to the design and methods of inspection of such vessels and, where appropriate, the conditions under which Community technical requirements are to replace the previous national provisions;Whereas the technical requirements of the Directives on pressure vessels must be adapted without delay to take account of technical progress; whereas, in order to facilitate the implementation of the measures necessary for this purpose, provisions should be made for a procedure establishing close cooperation between the Member States and the Commission, within the Committee on the adaptation to technical progress of the Directives for removing technical barriers to intra-Community trade in pressure vessels;Whereas pressure vessels placed on the market might in certain cases represent a safety hazard although satisfying the requirements of the relevant separate Directive; whereas provision should therefore be made for a procedure to reduce this hazard,HAS ADOPTED THIS DIRECTIVE: