Council Regulation (EU) 2024/3211 of 16 December 2024 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products
Council Regulation (EU) 2024/3211of 16 December 2024amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:(1)In order to ensure a sufficient supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the CouncilRegulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1, ELI: http://data.europa.eu/eli/reg/2013/952/oj). ("CCT duties") on those products have been suspended by Council Regulation (EU) 2021/2278Council Regulation (EU) 2021/2278 of 20 December 2021 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation (EU) No 1387/2013 (OJ L 466, 29.12.2021, p. 1, ELI: http://data.europa.eu/eli/reg/2021/2278/oj).. As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates without any limitation as regards their quantity.(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the interest of the Union to ensure an adequate supply of certain products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties also on such products.(3)With a view to promoting integrated battery production in the Union, a partial suspension of the CCT duties should be granted in respect of certain products related to battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278, and the respective Union production of which is inadequate to meet the specific requirements of the user industries in the Union. The date for the mandatory review of those suspensions should be 31 December 2025, in order for that review to take into account the short-term evolution of the battery production sector in the Union.(4)It is necessary to amend the product description, classification or end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market.(5)The Commission has reviewed certain CCT duty suspensions for products listed in the Annex to Regulation (EU) 2021/2278 in accordance with Article 2(2) of that Regulation. As it is in the interest of the Union to maintain the CCT duty suspensions for some of those products, new dates should be set for their next mandatory review.(6)It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. The suspensions for those products should therefore be deleted with effect from 1 January 2025.(7)Regulation (EU) 2021/2278 should therefore be amended accordingly.(8)In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 January 2025. This Regulation should therefore enter into force as a matter of urgency,HAS ADOPTED THIS REGULATION:
Article 1The Annex to Regulation (EU) 2021/2278 is replaced by the text set out in the Annex to this Regulation.
Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 January 2025.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 16 December 2024.For the CouncilThe PresidentK. KallasANNEX"ANNEX
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.Only the ad valorem duty is suspended. The specific duty shall continue to apply.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558, ELI: http://data.europa.eu/eli/reg_impl/2015/2447/oj).A measure introduced or amended by Council Regulation (EU) 2024/3211. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure."
Serial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review
0.6748ex0709530010Fresh or chilled chanterelles for treatment other than simple repacking for retail sale0 %—31.12.2025
0.3349ex0710809550Bamboo shoots, frozen, not put up for retail sale0 %—31.12.2029
0.2829ex0711590011Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry0 %—31.12.2026
0.2463ex07123200ex07123300ex07123400ex0712390010103131Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale0 %—31.12.2029
0.3347ex0804100030Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries0 %—31.12.2029
0.3228ex0811909520Boysenberries, frozen, not containing added sugar, not put up for retail sale0 %—31.12.2029
0.2409ex0811909530Pineapple (Ananas comosus), in pieces, frozen0 %—31.12.2029
0.2864ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930202020202020Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100,goods of heading 3401, orfatty acids with high purity of heading 29150 %—31.12.2027
0.8443ex1515609910Microbial oil, refined or semi-refined, containing by weight 35 % or more but not more than 70 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %—31.12.2029
0.3341ex1515909992Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %—31.12.2029
0.768615162010Hydrogenated castor oil, so called "opal-wax"0 %—31.12.2029
0.4080ex1517909910Vegetable and/or microbial oil, refined, containing by weight;25 % or more but not more than 70 % arachidonic acid, or12 % or more but not more than 65 % docosahexaenoic acid, andWhether or not:standardized with high oleic sunflower oil (HOSO),containing by weight 0,005 % or more, but not more than 0,1 % of antioxidants0 %—31.12.2026
0.8569ex1517909920An edible mixture of animal and vegetable oils consisting of 99 % or more by weight of fish oil exclusively from the species Pacific pollock (Gadus chalcogrammus):containing by weight 90 % or more of triglycerides, with 50 % or more by weight of its fatty acids being omega-3 fatty acids,containing by weight 0,15 % or more but not more than 0,25 % of tocopherols and vegetable oils,in immediate packing in steel drums of more than 180 kg/net but not more than 200 kg/net,for use in the manufacture of fish oil-based omega-3 supplements in the form of soft gel capsules0 %—31.12.2025
0.2423ex1902301040Glass noodles containing 60 % or more by weight of mung bean starch in immediate packings of 5 kg or more and not put up for retail sale0 %—31.12.2029
0.2866ex2005910010Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg0 %—31.12.2029
0.5884ex20079950ex200799508393Mango puree concentrate, obtained by cooking:of the genus Mangifera spp.,with a sugar content by weight of not more than 30 %for use in the manufacture of products of food and drink industry15 %—31.12.2025
0.5875ex20079950ex200799508494Papaya puree concentrate, obtained by cooking:of the genus Carica spp.,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry7,8 %—31.12.2029
0.5867ex20079950ex200799508595Guava puree concentrate, obtained by cooking:of the genus Psidium spp.,with a sugar content by weight of more than 13 % but not more than 30 %for use in the manufacture of products of food and drink industry6 %—31.12.2029
0.4716ex2008939120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries0 %—31.12.2027
0.4709ex20089949ex200899993040Seedless boysenberry puree not containing added spirit, whether or not containing added sugar0 %—31.12.2025
0.5587ex20089949ex200899997011Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:more than 6 % of salt concentration,0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate andwhether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995for use in the manufacture of stuffed vine leaves with rice0 %—31.12.2027
0.6723ex2008999120Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking0 %—31.12.2025
0.7767ex2008999935Frozen pulp from acai berries:hydrated and pasteurised,separated from the kernels by the addition of water,with a Brix value of less than 6, andwith a sugar content of less than 5,6 %0 %—31.12.2029
0.4992ex20094192ex200941992070Pineapple juice:not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry8 %—31.12.2025
0.4664ex2009493091Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than € 30 per 100 kg net weight,containing added sugarused in the manufacture of products of food or drink industry0 %—31.12.2029
0.4623ex2009813110Cranberry (Vaccinium macrocarpon) juice concentrateof a Brix value of 40 or more but not more than 66,in immediate packings of a content of 50 litres or more0 %l31.12.2029
0.6050ex2009897930Frozen acerola juice concentrate:with a Brix value of more than 48 but not more than 67,in immediate packings of a content of 50 litres or more0 %l31.12.2029
0.5206ex2009897985Acai berry juice concentrate:of the species Euterpe oleracea,frozen,not sweetened,not in powder form,of a Brix value of 23 or more but not more than 32,in immediate packings of a content of 10 kg or more0 %—31.12.2026
0.4157ex2009899996Coconut waterunfermented,not containing added spirit or sugar, andin immediate packing of a content of 20 litres or more0 %l31.12.2026
0.6152ex2106102020Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form0 %—31.12.2029
0.7284ex21069092ex350400905010Casein protein hydrolysate consisting of:by weight 20 % or more but not more than 70 % free amino acids, andpeptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da0 %—31.12.2027
0.5246ex2519901010Fused magnesia with a purity by weight of 94 % or more0 %—31.12.2026
0.6168ex2707999910Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 270 %—31.12.2029
0.8144ex2710122520Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with:a specific gravity of 0,666 or more but not more than 0,686,a total of carbonyl compounds of less than 1 ppm,a total of acetylenic compounds of less than 2 ppm0 %—31.12.2025
0.7823ex27101981ex271019993050Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,and witha viscosity index of 80 or more, but less than 120, anda kinematic viscosity less than 5,0 cSt at 100 oC or more than 13,0 cSt at 100 oC0 %—31.12.2029
0.7822ex27101981ex271019994060Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:90 % or more by weight of saturates, andnot more than 0,03 % by weight of sulphur,with a viscosity index of 120 or more0 %—31.12.2029
0.6495ex2710199920Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:not more than 1 mg/kg of sulphurmore than 99 % by weight of saturated hydrocarbonsmore than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; anda kinematic viscosity at 40 oC of more than 6,5 mm2/s, ora kinematic viscosity at 40 oC of more than 11 mm2/s with a viscosity index of 120 or more0 %—31.12.2029
0.7393ex2712909910Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms0 %—31.12.2027
0.802128047010Red phosphorus0 %—31.12.2027
0.802228047090Phosphorus, other than red phosphorus0 %—31.12.2029
0.6658ex2805120010Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)0 %—31.12.2025
0.5609ex2805199020Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more0 %—31.12.2027
0.2559ex2805301010Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium0 %—31.12.2029
0.49792805302128053029280530312805303928053040Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more0 %—31.12.2025
0.6836ex2811220015Amorphous silicon dioxide (CAS RN 60676-86-0)in the form of powderof a purity by weight of 99,0 % or morewith a median grain size of 0,7 μm or more, but not more than 2,1 μmwhere 70 % of the particles have a diameter of not more than 3 μm0 %—31.12.2029
0.7292ex2811299010Tellurium dioxide (CAS RN 7446-07-3)0 %—31.12.2027
0.3308ex2812900010Nitrogen trifluoride (CAS RN 7783-54-2)0 %—31.12.2029
0.5747ex2816400010Barium hydroxide (CAS RN 17194-00-2)0 %—31.12.2027
0.7594ex2818101110Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,00 %—31.12.2029
0.8425ex28181011ex281810912030Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1) and magnesium aluminate (CAS RN 12068-51-8), with a content by weight (calculated as oxides) of:92 % or more of aluminium oxide, and8 % or less of magnesium oxide0 %—31.12.2027
0.5110ex2818109120Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:92 % or more, but less than 98,5 % of aluminium oxide,2 % (±1,5 %) of magnesium oxide,1 % (±0,6 %) of yttrium oxide, andeither 3 % (±2,2 %) of lanthanum oxide or2 % (±1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm0 %—31.12.2025
0.4640ex2818200010Activated alumina with a specific surface area of at least 350 m2/g0 %—31.12.2029
0.6837ex2818300020Aluminium hydroxide (CAS RN 21645-51-2)in the form of powder,with a purity by weight of 99,5 % or more,with a decomposition point of 263 oC or more,with a particle size of 4 μm (± 1 μm),with a Total-Na2O-content by weight of not more than 0,06 %0 %—31.12.2025
0.3306ex2818300030Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)0 %—31.12.2029
0.5369ex2819909010Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy0 %—31.12.2026
0.5752ex2823000010Titanium dioxide (CAS RN 13463-67-7):of a purity by weight of 99,9 % or more,with an average grain-size of 0,7 μm or more but not more than 2,1 μm0 %—31.12.2027
0.5576ex2825100010Hydroxylammonium chloride (CAS RN 5470-11-1)0 %—31.12.2027
0.7897ex2825200010Lithium hydroxide monohydrate (CAS RN 1310-66-3)2,6 %—31.12.2025
0.380028253000Vanadium oxides and hydroxides0 %—31.12.2026
0.3303ex2825500020Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride0 %—31.12.2029
0.6819ex2825500030Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm0 %—31.12.2025
0.5555ex2825600010Zirconium dioxide (CAS RN 1314-23-4)0 %—31.12.2027
0.7193ex2825700020Molybdic Acid (CAS RN 7782-91-4)0 %—31.12.2026
0.5055ex2826199010Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more0 %—31.12.2025
0.8296ex2826908030Lithium hexafluorophosphate (CAS RN 21324-40-3) with a purity by weight of 99 % or more2,7 %—31.12.2025
0.2865ex2827398510Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %0 %—31.12.2029
0.4180ex2827398520Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more0 %—31.12.2026
0.6143ex2827398540Barium chloride dihydrate (CAS RN 10326-27-9)0 %—31.12.2029
0.6463ex2827600010Sodium iodide (CAS RN 7681-82-5)0 %—31.12.2029
0.7596ex2828100010Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more0 %—31.12.2029
0.3859ex2833298020Manganese sulphate monohydrate (CAS RN 10034-96-5)0 %—31.12.2029
0.4338ex2835100010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %—31.12.2027
0.6144ex2835100020Sodium hypophosphite (CAS RN 7681-53-0)0 %—31.12.2029
0.7452ex2835100030Aluminium Phosphinate (CAS RN 7784-22-7)0 %—31.12.2029
0.8448ex2835100040Calcium phosphinate (CAS RN 7789-79-9) with a purity by weight of 98 % or more0 %—31.12.2027
0.2524ex2836910020Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:2 mg/kg or more of arsenic,200 mg/kg or more of calcium,200 mg/kg or more of chlorides,20 mg/kg or more of iron,150 mg/kg or more of magnesium,20 mg/kg or more of heavy metals,300 mg/kg or more of potassium,300 mg/kg or more of sodium,200 mg/kg or more of sulphates,determined according to the methods specified in the European Pharmacopœia0 %—31.12.2029
0.2863ex2836991730Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more0 %—31.12.2029
0.3300ex2837190020Copper cyanide (CAS RN 544-92-3)0 %—31.12.2029
0.4078ex2837200010Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)0 %—31.12.2026
0.2861ex2839900020Calcium silicate (CAS RN 1344-95-2)0 %—31.12.2029
0.6632ex2840209010Zinc borate (CAS RN 12767-90-7)0 %—31.12.2025
0.8520ex2840209020Barium borate (CAS RN 13701-59-2) with a purity by weight of 99 % or more0 %—31.12.2027
0.7288ex2841500011Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more, for use as intermediate for the production of chrome2 %—31.12.2025
0.6482ex2841700030Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)0 %—31.12.2029
0.4323ex2841800010Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)0 %—31.12.2027
0.8441ex2841800020Disodium tungstate (CAS RN 13472-45-2) with a:purity by weight of 99 % or more,chlorine content of less than 100 ppm0 %—31.12.2027
0.7301ex2841903010Potassium metavanadate (CAS RN 13769-43-2)0 %—31.12.2027
0.5936ex2841908520Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more0 %—31.12.2029
0.4416ex2842100010Synthetic beta zeolite powder0 %—31.12.2029
0.4588ex2842100020Synthetic chabasite zeolite powder0 %—31.12.2029
0.7397ex2842100050Fluorphlogopite (CAS RN 12003-38-2)0 %—31.12.2027
0.7097ex2842100060Aluminosilicate (CAS RN 1318-02-1) witha purity by weight of 94 % or more,a zeolite structure of aluminophosphate-eighteen (AEI), anda phase purity of 90 % or morefor use in the manufacture of copper zeolite0 %—31.12.2026
0.4642ex2842901010Sodium selenate (CAS RN 13410-01-0)0 %—31.12.2029
0.329528451000Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)0 %—31.12.2029
0.418928454000Helium-3 (CAS RN 14762-55-1)0 %—31.12.2026
0.329728459010Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0 %—31.12.2029
0.4191ex2845909020Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)0 %—31.12.2029
0.4190ex2845909030(13C)Carbon monoxide (CAS RN 1641-69-6)0 %—31.12.2026
0.8426ex2845909050Ytterbium oxide (CAS RN 1380743-42-9), with a purity by weight of 99 % or more, enriched to 99,0 % or more but not more than 99,8 % of Ytterbium-1760 %—31.12.2027
0.2859ex28461000ex382499961053Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight0 %—31.12.2029
0.3296ex2846100020Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated0 %—31.12.2029
0.3420ex2846100030Cerium lanthanum carbonate, whether or not hydrated0 %—31.12.2029
0.3227284690302846904028469050284690602846907028469090Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 284610000 %—31.12.2029
0.3418ex2850002010Silane (CAS RN 7803-62-5)0 %—31.12.2029
0.5497ex2850002040Germanium tetrahydride (CAS RN 7782-65-2)0 %—31.12.2026
0.7302ex2850002060Disilane (CAS RN 1590-87-0)0 %—31.12.2027
0.7555ex2850002070Cubic Boron nitride (CAS RN 10043-11-5)0 %—31.12.2029
0.3419ex2850002080Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more0 %—31.12.2025
0.4492ex2850006010Sodium azide (CAS RN 26628-22-8)0 %—31.12.2029
0.3421ex2853909020Phosphine (CAS RN 7803-51-2)0 %—31.12.2029
0.8282ex29031900201,3-Dichloropropane (CAS RN 142-28-9) with a purity by weight of 99 % or more0 %—31.12.2026
0.663329034200Difluoromethane (CAS RN 75-10-5)0 %—31.12.2025
0.2854ex2903493010Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)0 %—31.12.2029
0.2852ex2903493020Perfluoroethane (CAS RN 76-16-4)0 %—31.12.2029
0.5803ex29035100102,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)0 %—31.12.2027
0.4517ex2903510020Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)0 %—31.12.2029
0.4066ex2903590030Hexafluoropropene (CAS RN 116-15-4)0 %—31.12.2026
0.7324ex29035900401,1,2,3,4,4-Hexafluorobuta-1,3-diene (CAS RN 685-63-2)0 %—31.12.2027
0.8553ex2903691925(E)-1,4-Dibrombut-2-ene (CAS RN 821-06-7) with a purity by weight of 98 % or more0 %—31.12.2028
0.8525ex29036919352,2-Dibromopropane (CAS RN 594-16-1) with a purity by weight of 99 % or more0 %—31.12.2028
0.7974ex29036919403-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more0 %—31.12.2025
0.8318ex2903691950Vinyl bromide (CAS RN 593-60-2) with a purity by weight of 98 % or more, or as a solution in tetrahydrofuran (CAS RN 109-99-9) containing by weight 23 % or more, but not more than 26 % vinylbromide0 %—31.12.2027
0.8151ex29036919601-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity by weight of 99 % or more0 %—31.12.2026
0.7895ex2903720010Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more0 %—31.12.2029
0.5212ex2903779010Chlorotrifluoroethylene (CAS RN 79-38-9)0 %—31.12.2026
0.6485ex2903793010Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)0 %—31.12.2029
0.5765ex2903897050Chlorocyclopentane (CAS RN 930-28-9)0 %—31.12.2027
0.7304ex2903897060Octafluorocyclobutane (CAS RN 115-25-3)0 %—31.12.2027
0.6611ex29039980154-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)0 %—31.12.2025
0.8492ex29039980181-Fluoronaphthalene (CAS RN 321-38-0) with a purity by weight of 99 % or more0 %—31.12.2027
0.3410ex29039980201,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)0 %—31.12.2029
0.8557ex29039980233,5-Bis(trifluoromethyl) benzylbromide (CAS RN 32247-96-4) with a purity by weight of 95 % or more0 %—31.12.2028
0.8017ex29039980252,2′-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more0 %—31.12.2025
0.8018ex29039980352-Bromo-9,9′-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more0 %—31.12.2025
0.3411ex29039980402,6-Dichlorotoluene (CAS RN 118-69-4), of a purity by weight of 99 % or more and containing:0,001 mg/kg or less of tetrachlorodibenzodioxines,0,001 mg/kg or less of tetrachlorodibenzofurans,0,2 mg/kg or less of tetrachlorobiphenyls0 %—31.12.2029
0.8076ex29039980451-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more0 %—31.12.2025
0.4529ex2903998050Fluorobenzene (CAS RN 462-06-6)0 %—31.12.2029
0.8101ex29039980551-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more0 %—31.12.2025
0.8166ex29039980652,6-Difluorobenzyl bromide (CAS RN 85118-00-9) with a purity by weight of 97 % or more0 %—31.12.2026
0.8177ex29039980701-[Chloro(phenyl)methyl]-2-methylbenzene (CAS RN 41870-52-4) with a purity by weight of 99 % or more0 %—31.12.2026
0.5917ex29039980801-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)0 %—31.12.2029
0.3407ex2904100030Sodium p-styrenesulphonate (CAS RN 2695-37-6)0 %—31.12.2029
0.4686ex2904100050Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)0 %—31.12.2029
0.3409ex2904200010Nitromethane (CAS RN 75-52-5)0 %—31.12.2025
0.3391ex2904200020Nitroethane (CAS RN 79-24-3)0 %—31.12.2027
0.3408ex29042000301-Nitropropane (CAS RN 108-03-2)0 %—31.12.2025
0.3390ex29042000402-Nitropropane (CAS RN 79-46-9)0 %—31.12.2029
0.2526ex29049900201-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)0 %—31.12.2029
0.6612ex2904990025Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)0 %—31.12.2025
0.3388ex2904990030Tosyl chloride (CAS RN 98-59-9)0 %—31.12.2029
0.6613ex29049900351-Fluoro-4-nitrobenzene (CAS RN 350-46-9)0 %—31.12.2025
0.5745ex29049900404-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)0 %—31.12.2027
0.6001ex2904990050Ethanesulphonyl chloride (CAS RN 594-44-5)0 %—31.12.2029
0.7957ex29049900552,4-Dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more0 %—31.12.2025
0.6407ex29049900604,4′-Dinitrostilbene-2,2′-disulfonic acid (CAS RN 128-42-7)0 %—31.12.2029
0.8160ex29049900654-Nitrotoluene-2-sulphonic acid (CAS RN 121-03-9) in powder form, with a purity by weight of 80 % or more and a content of water by weight of 15 % or more0 %—31.12.2026
0.6560ex29049900801-Chloro-2-nitrobenzene (CAS RN 88-73-3)0 %—31.12.2029
0.6186ex2905110010Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more0 %—31.12.2029
0.2967ex2905190011Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN0 %—31.12.2029
0.6118ex2905190020Butyltitanate monohydrate, homopolymer (CAS RN 162303-51-7)0 %—31.12.2029
0.6119ex2905190025Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)0 %—31.12.2029
0.5534ex2905190070Titanium tetrabutanolate (CAS RN 5593-70-4)0 %—31.12.2027
0.5533ex2905190080Titanium tetraisopropoxide (CAS RN 546-68-9)0 %—31.12.2027
0.6002ex2905190085Titanium tetraethanolate (CAS RN 3087-36-3)0 %—31.12.2029
0.6464ex2905220010Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)0 %—31.12.2029
0.7114ex29052200203,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)0 %—31.12.2026
0.7388ex2905299010Cis-hex-3-en-1-ol (CAS RN 928-96-1)0 %—31.12.2027
0.8544ex29053995152,5-Dimethylhexane-2,5-diol (CAS RN 110-03-2) with a purity by weight of 98 % or more0 %—31.12.2028
0.8619ex2905399525Pinacol (CAS RN 76-09-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.5255ex29053995302,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)0 %—31.12.2026
0.5847ex2905399540Decane-1,10-diol (CAS RN 112-47-0)0 %—31.12.2027
0.5908ex29053995502-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)0 %—31.12.2029
0.7701ex2905399560Dodecane-1,12-diol (CAS RN 5675-51-4)0 %—31.12.2029
0.7914ex29053995702-Methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more0 %—31.12.2029
0.8370ex2905399580Pentane-1,5-diol (CAS RN 111-29-5) with a purity by weight of 97 % or more0 %—31.12.2027
0.4624ex29055998202,2,2-Trifluoroethanol (CAS RN 75-89-8)0 %—31.12.2029
0.3378ex2906190010Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)0 %—31.12.2027
0.3380ex29061900204,4′-Isopropylidenedicyclohexanol (CAS RN 80-04-6)0 %—31.12.2029
0.6257ex29061900504-tert-Butylcyclohexanol (CAS RN 98-52-2)0 %—31.12.2029
0.8231ex29061900605-Methyl-2-(prop-1-en-2-yl)cyclohexanol, mixture of isomers (CAS RN 7786-67-6) with a purity by weight of 90 % or more0 %—31.12.2026
0.8721ex2906190070(1S,2S,3R,5S)-(+)-2,3-Pinanediol (CAS RN 18680-27-8) with a purity by weight of 98 % or more0 %—31.12.2029
0.7373ex29062900502,2′-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5)0 %—31.12.2027
0.7806ex29062900603-[3-(Trifluoromethyl)phenyl]propan-1-ol (CAS RN 78573-45-2)0 %—31.12.2029
0.7963ex29062900701,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more0 %—31.12.2025
0.5855ex29062900852-Phenylethanol (CAS RN 60-12-8) with a purity by weight of 95 % or more0 %—31.12.2027
0.6329ex2907120020Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more0 %—31.12.2029
0.6559ex2907120030p-Cresol (CAS RN 106-44-5)0 %—31.12.2029
0.5216ex29071590102-Naphthol (CAS RN 135-19-3)0 %—31.12.2026
0.6256ex29071910102,6-Xylenol (CAS RN 576-26-1)0 %—31.12.2029
0.4480ex2907199020Biphenyl-4-ol (CAS RN 92-69-3)0 %—31.12.2029
0.7753ex29071990302-Methyl-5-(propan-2-yl)phenol (CAS RN 499-75-2)0 %—31.12.2029
0.3372ex2907210010Resorcinol (CAS RN 108-46-3)0 %—31.12.2029
0.8482ex29072900134,4′-Methylenedi-2,6-xylenol (CAS RN 5384-21-4) with a purity by weight of 98,5 % or more0 %—31.12.2027
0.6026ex29072900156,6′-Di-tert-butyl-4,4′-butylidenedi-m-cresol (CAS RN 85-60-9)0 %—31.12.2029
0.3367ex29072900304,4′,4′′-Ethylidynetriphenol (CAS RN 27955-94-8)0 %—31.12.2029
0.5432ex29072900452-Methylhydroquinone (CAS RN 95-71-6)0 %—31.12.2026
0.2584ex29072900702,2′,2′′,6,6′,6′′-Hexa-tert-butyl-α,α′,α′′-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)0 %—31.12.2029
0.7402ex2907290075Biphenyl-4,4′-diol (CAS RN 92-88-6)0 %—31.12.2029
0.3848ex2907290085Phloroglucinol whether or not hydrated0 %—31.12.2029
0.5914ex29081900204,4′-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)0 %—31.12.2029
0.6260ex29081900304-Chlorophenol (CAS RN 106-48-9)0 %—31.12.2029
0.6782ex29081900403,4,5-Trifluorophenol (CAS RN 99627-05-1)0 %—31.12.2025
0.6915ex29081900504-Fluorophenol (CAS RN 371-41-5)0 %—31.12.2025
0.8204ex29081900702,3,6-Trifluorophenol (CAS RN 113798-74-6) with a purity by weight of 98 % or more0 %—31.12.2026
0.3359ex2909199030Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more0 %—31.12.2029
0.4035ex29091990503-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)0 %—31.12.2026
0.5407ex29092000108-Methoxycedrane (CAS RN 19870-74-7)0 %—31.12.2026
0.5503ex29093038201,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)0 %—31.12.2026
0.6649ex29093038301,1′-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)0 %—31.12.2025
0.7828ex29093038502-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more0 %—31.12.2029
0.4710ex29093090102-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)0 %—31.12.2029
0.7176ex2909309015{[(2,2-Dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)0 %—31.12.2026
0.4711ex29093090201,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)0 %—31.12.2029
0.7115ex29093090251,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane0 %—31.12.2026
0.5117ex29093090303,4,5-Trimethoxytoluene (CAS RN 6443-69-2)0 %—31.12.2025
0.6614ex29093090401-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)0 %—31.12.2025
0.8167ex29093090455-Bromo-1,3-difluoro-2-(trifluoromethoxy)benzene (CAS RN 115467-07-7) with a purity by weight of 95 % or more0 %—31.12.2026
0.6783ex29093090501-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)0 %—31.12.2025
0.6784ex29093090601-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)0 %—31.12.2025
0.6994ex2909309070O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)0 %—31.12.2026
0.7706ex29094400102-Propoxyethanol (CAS RN 2807-30-9)0 %—31.12.2029
0.6927ex29094980101-Propoxypropan-2-ol (CAS RN 1569-01-3)0 %—31.12.2026
0.8241ex29094980303,4-Dimethoxybenzyl alcohol (CAS RN 93-03-8) with a purity by weight of 98 % or more0 %—31.12.2026
0.8531ex29094980402,2′-p-Phenylenedioxydiethanol (CAS RN 104-38-1) with a purity by weight of 99 % or more0 %—31.12.2028
0.3484ex29095000104-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)0 %—31.12.2029
0.3682ex2909609010Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)0 %—31.12.2025
0.7910ex2909609050Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes0 %—31.12.2029
0.7744ex29109000102-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)0 %—31.12.2029
0.5940ex29109000151,2-Epoxycyclohexane (CAS RN 286-20-4)0 %—31.12.2029
0.7672ex2910900025Phenyloxirane (CAS RN 96-09-3)0 %—31.12.2029
0.2649ex29109000302,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)0 %—31.12.2029
0.8042ex2910900040[(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more0 %—31.12.2025
0.6660ex29109000502,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)0 %—31.12.2025
0.4361ex2910900080Allyl glycidyl ether (CAS RN 106-92-3)0 %—31.12.2026
0.7116ex2912190010Undecanal (CAS RN 112-44-7)0 %—31.12.2026
0.8073ex2912190020Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more for the production of perfume or pharmaceutical intermediaries0 %—31.12.2025
0.6968ex29122900152,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)0 %—31.12.2026
0.7314ex2912290035Cinnamaldehyde (CAS RN 104-55-2)0 %—31.12.2027
0.8604ex2912290065Terephthalaldehyde (CAS RN 623-27-8) with a purity by weight of 98 % or more0 %—31.12.2028
0.6072ex29122900704-tert-Butylbenzaldehyde (CAS RN 939-97-9)0 %—31.12.2029
0.814729124200Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)0 %—31.12.2025
0.5135ex2912490030Salicylaldehyde (CAS RN 90-02-8)0 %—31.12.2025
0.6678ex29124900403-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)0 %—31.12.2025
0.7353ex29124900502,6-Dihydroxybenzaldehyde (CAS RN 387-46-2)0 %—31.12.2027
0.8582ex29124900604-Hydroxybenzaldehyde (CAS RN 123-08-0) with a purity by weight of 96 % or more0 %—31.12.2028
0.7712ex29130000102-Nitrobenzaldehyde (CAS RN 552-89-6)0 %—31.12.2029
0.8328ex29130000204-(Difluoromethoxy)-3-hydroxybenzaldehyde (CAS RN 151103-08-1) with a purity by weight of 98 % or more0 %—31.12.2029
0.8552ex29130000302-Hydroxy-5-nitrobenzaldehyde (CAS RN 97-51-8) with a purity by weight of 95 % or more0 %—31.12.2028
0.4228ex2914199020Heptan-2-one (CAS RN 110-43-0)0 %—31.12.2027
0.4274ex29141990303-Methylbutanone (CAS RN 563-80-4)0 %—31.12.2027
0.4275ex2914199040Pentan-2-one (CAS RN 107-87-9)0 %—31.12.2027
0.7554ex2914199060Zinc acetylacetonate (CAS RN 14024-63-6)0 %—31.12.2029
0.7568ex2914290015Oestr-5 (10) -ene-3,17-dione (CAS RN 3962-66-1)0 %—31.12.2029
0.3475ex2914290020Cyclohexadec-8-enone (CAS RN 3100-36–5)0 %—31.12.2029
0.7450ex2914290025Cyclohex-2-enone (CAS RN 930-68-7)0 %—31.12.2029
0.4933ex2914290030(R)-p-Mentha-1 (6) ,8-dien-2-one (CAS RN 6485-40-1)0 %—31.12.2025
0.8015ex29142900354-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more0 %—31.12.2025
0.3480ex2914290040Camphor (CAS 76-22-2)0 %—31.12.2029
0.8058ex29142900454-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more0 %—31.12.2025
0.7389ex29142900551-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of more than 90 %0 %—31.12.2029
0.8695ex29142900653-Methylcyclopent-2-enone (CAS RN 2758-18-1) with a purity by weight of 98 % or more0 %—31.12.2029
0.6265ex29143900152,6-Dimethyl-1-indanone (CAS RN 66309-83-9)0 %—31.12.2029
0.6447ex29143900251,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)0 %—31.12.2029
0.4227ex2914390030Benzophenone (CAS RN 119-61-9)0 %—31.12.2027
0.4428ex29143900604-Methylbenzophenone (CAS RN 134-84-9)0 %—31.12.2029
0.5739ex2914390070Benzil (CAS RN 134-81-6)0 %—31.12.2029
0.5535ex29143900804′-Methylacetophenone (CAS RN 122-00-9)0 %—31.12.2027
0.8288ex2914409010Benzoin (CAS RN 119-53-9) with a purity by weight of 99 % or more0 %—31.12.2026
0.7824ex29145000151,1-Dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more0 %—31.12.2029
0.8168ex29145000184′-Hydroxyacetophenone (CAS RN 99-93-4) with a purity by weight of 99 % or more0 %—31.12.2026
0.4932ex29145000203′-Hydroxyacetophenone (CAS RN 121-71-1)0 %—31.12.2025
0.8179ex29145000231-[2-(Oxiran-2-ylmethoxy)phenyl]-3-phenylpropan-1-one (CAS RN 22525-95-7) with a purity by weight of 99 % or more0 %—31.12.2026
0.5943ex29145000254′-Methoxyacetophenone (CAS RN 100-06-1)0 %—31.12.2029
0.8195ex29145000281,1′-{(2-Hydroxypropane-1,3-diyl)bis[oxy(6-hydroxybenzene-2,1-diyl)]}diethanone (CAS RN 16150-44-0) with a purity by weight of 98 % or more0 %—31.12.2026
0.7797ex29145000352-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1-one (CAS RN 71868-15-0)0 %—31.12.2029
0.5435ex29145000404-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)0 %—31.12.2026
0.5809ex29145000453,4-Dihydroxybenzophenone (CAS RN 10425-11-3)0 %—31.12.2027
0.4235ex29145000602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %—31.12.2027
0.4385ex29145000802′,6′-Dihydroxyacetophenone (CAS RN 699-83-2)0 %—31.12.2029
0.2647ex29146980102-Ethylanthraquinone (CAS RN 84-51-5)0 %—31.12.2029
0.2643ex29146980301,4-Dihydroxyanthraquinone (CAS RN 81-64-1)0 %—31.12.2029
0.5430ex2914698040p-Benzoquinone (CAS RN 106-51-4)0 %—31.12.2029
0.5782ex29147900202,4′-Difluorobenzophenone (CAS RN 342-25-6)0 %—31.12.2027
0.7751ex2914790027(2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone (CAS RN 915095-86-2)0 %—31.12.2029
0.7467ex29147900305-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7)0 %—31.12.2029
0.8338ex2914790033(4R)-4-(2-Fluorophenyl)-3,4-dihydro-2H-naphthalen-1-one (CAS RN 1234356-88-7) with a purity by weight of 99 % or more0 %—31.12.2027
0.3474ex2914790040Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)0 %—31.12.2029
0.8563ex29147900435-Chloropentan-2-one (CAS RN 5891-21-4) with a purity by weight of 95 % or more0 %—31.12.2028
0.8591ex29147900482-Chloro-3′,4′-dihydroxyacetophenone (CAS RN 99-40-1) with a purity by weight of 99 % or more0 %—31.12.2028
0.2640ex29147900503′-Chloropropiophenone (CAS RN 34841-35-5)0 %—31.12.2029
0.4948ex29147900604′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1)0 %—31.12.2026
0.5237ex29147900704-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3)0 %—31.12.2026
0.6120ex2914790080Tetrachloro-p-benzoquinone (CAS RN 118-75-2)0 %—31.12.2029
0.7955ex2915240010Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 94 % or more0 %—31.12.2025
0.8543ex29153900154-(2,2-Dichlorocyclopropyl)phenylacetate (CAS RN 144900-34-5) with a purity by weight of 97 % or more0 %—31.12.2028
0.6155ex29153900252-Methylcyclohexyl acetate (CAS RN 5726-19-2)0 %—31.12.2029
0.7433ex2915390035Cis-3-hexenyl acetate (CAS RN 3681-71-8) with a purity by weight of 95 % or more0 %—31.12.2027
0.2957ex2915390040tert-Butyl acetate (CAS RN 540-88-5)0 %—31.12.2029
0.7423ex29153900454-tert-Butylcyclohexyl acetate (CAS RN 32210-23-4) with a purity by weight of 95 % or more0 %—31.12.2027
0.5119ex2915390060Dodec-8-enyl acetate (CAS RN 28079-04-1)0 %—31.12.2025
0.5121ex2915390065Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)0 %—31.12.2025
0.5120ex2915390070Dodec-9-enyl acetate (CAS RN 16974-11-1)0 %—31.12.2025
0.5289ex2915390075Isobornyl acetate (CAS RN 125-12-2)0 %—31.12.2026
0.5301ex29153900801-Phenylethyl acetate (CAS RN 93-92-5)0 %—31.12.2026
0.5909ex29153900852-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)0 %—31.12.2029
0.7834ex2915400010Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more0 %—31.12.2029
0.5858ex2915601920Ethyl butyrate (CAS RN 105-54-4) with a purity by weight of 95 % or more0 %—31.12.2027
0.7540ex2915704010Methyl palmitate (CAS RN 112-39-0)0 %—31.12.2029
0.7541ex2915903010Methyl laurate (CAS RN 111-82-0)0 %—31.12.2025
0.8495ex2915903020Chloromethyl dodecanoate (CAS RN 61413-67-0) with a purity by weight of 97 % or more0 %—31.12.2027
0.7407ex2915907020Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)0 %—31.12.2027
0.7542ex2915907025Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)0 %—31.12.2029
0.6003ex2915907027Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more0 %—31.12.2029
0.5767ex29159070303,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)0 %—31.12.2027
0.8154ex2915907033Ethyl 8-bromooctanoate (CAS RN 29823-21-0) with a purity by weight of 98 % or more0 %—31.12.2026
0.8423ex2915907043Trifluoroacetic anhydride (CAS RN 407-25-0) with a purity by weight of 98 % or more0 %—31.12.2027
0.6255ex2915907045Trimethyl orthoformate (CAS RN 149-73-5)0 %—31.12.2029
0.8457ex29159070533-Chloro-2,2-dimethylpropanoyl chloride (CAS RN 4300-97-4) with a purity by weight of 98 % or more0 %—31.12.2027
0.4954ex2915907060Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)0 %—31.12.2025
0.2585ex29161200102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)0 %—31.12.2029
0.3466ex2916130030Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities0 %—31.12.2025
0.3468ex2916130040Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser0 %—31.12.2029
0.2638ex29161400102,3-Epoxypropyl methacrylate (CAS RN 106-91-2)0 %—31.12.2029
0.5991ex2916199540Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds0 %—31.12.2029
0.6238ex2916199550Methyl 2-fluoroacrylate (CAS RN 2343-89-7)0 %—31.12.2029
0.7980ex2916199560Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)0 %—31.12.2025
0.7940ex2916199570Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more0 %—31.12.2025
0.7023ex2916200015Transfluthrin (ISO) (CAS RN 118712-89-3)0 %—31.12.2026
0.7931ex2916200025Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more0 %—31.12.2025
0.7933ex29162000352-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more0 %—31.12.2025
0.8057ex2916200045Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more0 %—31.12.2025
0.8336ex2916200055Methyl 2,2-dimethyl-3-(2-methylprop-1-en-1-yl)cyclopropane-1-carboxylate (CAS RN 5460-63-9) with a purity by weight of 90 % or more0 %—31.12.2027
0.4931ex29162000603-Cyclohexylpropionic acid (CAS RN 701-97-3)0 %—31.12.2025
0.8352ex2916200065Tefluthrin (ISO)(CAS RN 79538-32-2) with a purity by weight of 96 % or more0 %—31.12.2027
0.5421ex2916310010Benzyl benzoate (CAS RN 120-51-4)0 %—31.12.2026
0.8214ex2916310020Phenethyl benzoate (CAS RN 94-47-3) with a purity by weight of 95 % or more0 %—31.12.2026
0.6248ex29163990133,5-Dinitrobenzoic acid (CAS RN 99-34-3)0 %—31.12.2029
0.5214ex29163990152-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)0 %—31.12.2026
0.7929ex29163990163-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more0 %—31.12.2025
0.2636ex29163990203,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)0 %—31.12.2029
0.6557ex2916399023(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)0 %—31.12.2029
0.4951ex29163990252-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)0 %—31.12.2026
0.7827ex2916399027Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more0 %—31.12.2029
0.4930ex29163990302,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)0 %—31.12.2025
0.5944ex2916399035Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)0 %—31.12.2029
0.8489ex2916399040Ethyl 4-bromo-3-(bromomethyl)benzoate (CAS RN 347852-72-6) with a purity by weight of 97 % or more0 %—31.12.2027
0.6794ex29163990414-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)0 %—31.12.2025
0.7734ex29163990432-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic acid (CAS RN 289686-70-0)0 %—31.12.2029
0.2634ex29163990503,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)0 %—31.12.2029
0.6661ex29163990535-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)0 %—31.12.2025
0.4238ex29163990554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %—31.12.2027
0.8169ex29163990632-Phenylbutyric acid (CAS RN 90-27-7) with a purity by weight of 99 % or more0 %—31.12.2026
0.8369ex2916399067Nitrobenzoic acid (CAS RN 62-23-7) with a purity by weight of 99 % or more0 %—31.12.2027
0.3462ex2916399070Ibuprofen (INN) (CAS RN 15687-27-1)0 %—31.12.2029
0.7117ex2916399073(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)0 %—31.12.2026
0.5541ex2916399075m-Toluic acid (CAS RN 99-04-7)0 %—31.12.2027
0.8039ex2916399078(2,5-Dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more0 %—31.12.2025
0.5543ex2916399085(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)0 %—31.12.2027
0.3457ex2917110020Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)0 %—31.12.2029
0.4746ex2917110030Cobalt oxalate (CAS RN 814-89-1)0 %—31.12.2029
0.4684ex2917191010Dimethyl malonate (CAS RN 108-59-8)0 %—31.12.2029
0.5602ex2917191020Diethyl malonate (CAS RN 105-53-3)0 %—31.12.2027
0.7451ex2917198035Diethyl methylmalonate (CAS RN 609-08-5)0 %—31.12.2029
0.7880ex2917198045Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more0 %—31.12.2029
0.4918ex2917198050Tetradecanedioic acid (CAS RN 821-38-5)0 %—31.12.2025
0.8302ex2917198055Maleic acid (CAS RN 110-16-7) with a purity by weight of 99 % or more3,2 %—31.12.2025
0.8530ex2917198060Oxalyl dichloride (CAS RN 79-37-8) with a purity by weight of 99 % or more0 %—31.12.2028
0.8728ex291719806520-tert-butoxy-20-oxoicosanoic acid (CAS RN 683239-16-9) with a purity by weight of 98 % or more0 %—31.12.2029
0.3454ex2917198070Itaconic acid (CAS RN 97-65-4)0 %—31.12.2029
0.4790ex2917198075Ethylene brassylate (CAS RN 105-95-3) with a purity by weight of 97 % or more0 %—31.12.2029
0.8534ex2917198080Ethyl chloroglyoxylate (CAS RN 4755-77-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.2631ex29172000301,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)0 %—31.12.2029
0.2627ex29172000403-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)0 %—31.12.2029
0.2954ex2917340010Diallyl phthalate (CAS RN 131-17-9)0 %—31.12.2029
0.4945ex2917398520Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)0 %—31.12.2025
0.6796ex2917398525Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)0 %—31.12.2025
0.3640ex2917398530Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)0 %—31.12.2025
0.6800ex29173985351-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)0 %—31.12.2025
0.8255ex29173985453-(4-Chlorophenyl)glutaric acid (CAS RN 35271-74-0) with a purity by weight of 98 % or more0 %—31.12.2026
0.6553ex29173985501,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)0 %—31.12.2029
0.8526ex29173985553-Nitrophthalic acid (CAS RN 603-11-2) with a purity by weight of 98 % or more0 %—31.12.2028
0.6554ex2917398560Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8)0 %—31.12.2029
0.6366ex2918193010Cholic acid (CAS RN 81-25-4)0 %—31.12.2029
0.6367ex29181930203-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)0 %—31.12.2029
0.2950ex2918199820L-Malic acid (CAS RN 97-67-6)0 %—31.12.2029
0.8509ex2918199825(S)-2-Hydroxy-2-phenylacetic acid (CAS RN 17199-29-0) with a purity by weight of 99 % or more0 %—31.12.2027
0.7702ex2918199830Ethyl 1-hydroxycyclopentanecarboxylate (CAS RN 41248-23-1)0 %—31.12.2029
0.7907ex291819985012-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters0 %—31.12.2029
0.8044ex2918199860(R)-tert-Butyl 2′-(1-hydroxyethyl)-3-methyl-[1,1′-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more0 %—31.12.2025
0.8422ex2918199870Rac-tert-butyl 3-hydroxy-4-pentenoate (CAS RN 122763-67-1) with a purity by weight of 98 % or more0 %—31.12.2027
0.5781ex2918290035Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)0 %—31.12.2027
0.8008ex29182900403-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %0 %—31.12.2025
0.3638ex2918290050Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)0 %—31.12.2029
0.5220ex2918290060Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)0 %—31.12.2026
0.6456ex29182900703,5-Diiodosalicylic acid (CAS RN 133-91-5)0 %—31.12.2029
0.4427ex2918300030Methyl-2-benzoylbenzoate (CAS RN 606-28-0)0 %—31.12.2029
0.7864ex29183000353-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)0 %—31.12.2029
0.8075ex2918300045Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more0 %—31.12.2025
0.8256ex2918300055Methyl 3-oxo-pentanoate (CAS RN 30414-53-0) with a purity by weight of 98 % or more0 %—31.12.2026
0.6250ex29183000604-Oxovaleric acid (CAS RN 123-76-2)0 %—31.12.2029
0.6455ex29183000702-[4-Chloro-3- (chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)0 %—31.12.2029
0.8342ex2918300075Methyl 2-((1S,2R)-3-oxo-2-pentylcyclopentyl)acetate (CAS RN 151716-35-7) with a purity by weight of 99 % or more0 %—31.12.2027
0.7062ex2918300080Methyl benzoylformate (CAS RN 15206-55-0)0 %—31.12.2026
0.7344ex29183000852-Fluoro-5-formylbenzoic acid (CAS RN 550363-85-4) with a purity by weight of 98 % or more0 %—31.12.2029
0.5857ex2918300087Ethyl acetoacetate (CAS RN 141-97-9) with a purity by weight of 98 % or more0 %—31.12.2027
0.6814ex29189990133-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)0 %—31.12.2025
0.5856ex2918999015Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)0 %—31.12.2027
0.6901ex2918999018Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)0 %—31.12.2025
0.6147ex2918999025Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)0 %—31.12.2029
0.7256ex2918999027Ethyl 3-ethoxypropionate (CAS RN 763-69-9)0 %—31.12.2027
0.6342ex2918999035p-Anisic acid (CAS RN 100-09-4)0 %—31.12.2029
0.7358ex2918999038Diclofop-methyl (ISO) (CAS RN 51338-27-3)0 %—31.12.2027
0.2945ex2918999040trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)0 %—31.12.2029
0.7934ex2918999043Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more0 %—31.12.2025
0.6224ex29189990454-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)0 %—31.12.2029
0.8066ex29189990482-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more0 %—31.12.2025
0.2947ex2918999050Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)0 %—31.12.2029
0.8623ex29189990582,4-D (ISO) (CAS RN 94-75-7) with a purity by weight of 98 % or more0 %—31.12.2028
0.2943ex29189990603,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)0 %—31.12.2029
0.4742ex2918999070Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)0 %—31.12.2029
0.2948ex2918999073Methyl (2R)-2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) with a purity by weight of 97 % or more0 %—31.12.2029
0.6747ex2918999085Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more0 %—31.12.2025
0.7723ex2919900025Triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2029
0.5495ex2919900050Triethyl phosphate (CAS RN 78-40-0)0 %—31.12.2026
0.6188ex2919900060Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)0 %—31.12.2029
0.6413ex2919900070Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)0 %—31.12.2029
0.6253ex29201900302,2′-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2′-disulphide (CAS RN 4090-51-1)0 %—31.12.2029
0.363429202300Trimethyl phosphite (CAS RN 121-45-9)0 %—31.12.2029
0.415829202400Triethyl phosphite (CAS RN 122-52-1)0 %—31.12.2026
0.2626ex2920290010O,O′-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)0 %—31.12.2029
0.5038ex2920290020Tris(methylphenyl)phosphite (CAS RN 25586-42-9)0 %—31.12.2025
0.5045ex2920290040Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)0 %—31.12.2025
0.6004ex2920290050Fosetyl-aluminium (CAS RN 39148-24-8)0 %—31.12.2029
0.7898ex29202900802,4,8,10-Tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a purity by weight of 95 % or more0 %—31.12.2029
0.8522ex2920901013Tetraethyl orthocarbonate (CAS RN 78-09-1) with a purity by weight of 99 % or more0 %—31.12.2028
0.7559ex2920901015Ethyl methyl carbonate (CAS RN 623-53-0)3,2 %—31.12.2025
0.2605ex2920901020Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3)0 %—31.12.2029
0.8641ex29209010231,3,2-Dioxathiolane 2,2-dioxide (CAS RN 1072-53-3) with a purity by weight of 99 %, or more3,2 %—31.12.2025
0.3685ex2920901040Dimethyl carbonate (CAS RN 616-38-6)0 %—31.12.2029
0.8297ex2920901045Ethylene carbonate (CAS RN 96-49-1) with a purity by weight of 99 % or more3,2 %—31.12.2025
0.3868ex2920901050Di-tert-butyl dicarbonate (CAS RN 24424-99-5)0 %—31.12.2029
0.8298ex2920901055Vinylene carbonate (CAS RN 872-36-6) with a purity by weight of 99,9 % or more3,2 %—31.12.2025
0.8299ex2920901065Vinyl ethylene carbonate (CAS RN 4427-96-7) with a purity by weight of 99 % or more3,2 %—31.12.2025
0.8542ex2920907010Tris(2-propylheptyl) borate (CAS RN 1488321-95-4) with a purity by weight of 90 % or more0 %—31.12.2028
0.7588ex2920907020Diethyl phosphorochloridate (CAS RN 814-49-3)0 %—31.12.2029
0.8719ex2920907035Triisopropyl borate (CAS RN 5419-55-6) with a purity by weight of 99 % or more0 %—31.12.2029
0.5947ex2920907060Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)0 %—31.12.2029
0.8490ex29209070704,4,5,5-Tetramethyl-1,3,2-dioxaborolane (CAS RN 25015-63-8) with a purity by weight of 97 % or more, containing not more than 1 % of the stabiliser triethylamine (CAS RN 121-44-8)0 %—31.12.2027
0.6598ex2920907080Bis(pinacolato)diboron (CAS RN 73183-34-3)0 %—31.12.2025
0.3629ex2921199920Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)0 %—31.12.2029
0.3631ex2921199930Allylamine (CAS RN 107-11-9)0 %—31.12.2029
0.8477ex2921199935N-Ethyl-N-isopropylpropan-2-amine 2-(difluoromethoxy)acetate with a purity by weight of 98 % or more0 %—31.12.2027
0.7073ex29211999452-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)0 %—31.12.2026
0.8562ex29211999552,2,2-Trifluoroethylamine hydrochloride (CAS RN 373-88-6) with a purity by weight of 99 % or more0 %—31.12.2028
0.6269ex2921199980Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %—31.12.2029
0.8045ex2921290015(2S)-Propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more0 %—31.12.2025
0.3630ex2921290020Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)0 %—31.12.2029
0.8067ex2921290025N,N′-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more0 %—31.12.2025
0.3625ex2921290030Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)0 %—31.12.2029
0.8170ex2921290035Pentamethylenediamine (CAS RN 462-94-2) with a purity by weight of 99 % or more, also as an aqueous solution containing by weight more than 50 % of pentamethylenediamine0 %—31.12.2026
0.4917ex2921290040Decamethylenediamine (CAS RN 646-25-3)0 %—31.12.2025
0.5256ex2921290050N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine (CAS RN 6711-48-4)0 %—31.12.2026
0.7947ex2921290070N,N,N′,N′-Tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more0 %—31.12.2025
0.5768ex2921309940Cyclopropylamine (CAS RN 765-30-0)0 %—31.12.2027
0.8529ex2921309960Amantadine hydrochloride (CAS RN 665-66-7) with a purity by weight of 97 % or more0 %—31.12.2028
0.3909ex2921420025Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)0 %—31.12.2029
0.3978ex29214200352-Nitroaniline (CAS RN 88-74-4)0 %—31.12.2029
0.2620ex29214200503-Aminobenzenesulfonic acid (CAS RN 121-47-1)0 %—31.12.2029
0.7739ex29214200554-Chloroaniline (CAS RN 106-47-8)0 %—31.12.2029
0.3623ex29214200702-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)0 %—31.12.2029
0.3622ex29214200804-Chloro-2-nitroaniline (CAS RN 89-63-4)0 %—31.12.2029
0.5616ex29214200862,5-Dichloroaniline (CAS RN 95-82-9)0 %—31.12.2027
0.5603ex2921420087N-Methylaniline (CAS RN 100-61-8)0 %—31.12.2027
0.5617ex29214200883,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)0 %—31.12.2027
0.8433ex29214300256-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) with a purity by weight of 98 % or more0 %—31.12.2027
0.8568ex29214300353-Chloro-o-toluidine (CAS RN 87-60-5) with a purity by weight of 95 % or more0 %—31.12.2028
0.3980ex29214300404-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)0 %—31.12.2029
0.5124ex29214300603-Aminobenzotrifluoride (CAS RN 98-16-8)0 %—31.12.2025
0.3621ex2921440020Diphenylamine (CAS RN 122-39-4)0 %—31.12.2029
0.7316ex29214500601-Naphthylamine (CAS RN 134-32-7)0 %—31.12.2027
0.7592ex29214900352-Ethylaniline (CAS RN 578-54-1)0 %—31.12.2029
0.2609ex2921490040N-1-Naphthylaniline (CAS RN 90-30-2)0 %—31.12.2029
0.8019ex29214900452-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more0 %—31.12.2025
0.8020ex29214900552-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more0 %—31.12.2025
0.6825ex29214900602,6-Diisopropylaniline (CAS RN 24544-04-5)0 %—31.12.2025
0.8059ex2921490065Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more0 %—31.12.2025
0.8558ex2921490075N-Methyl-1-(1-napthyl)methanamine (CAS RN 14489-75-9) with a purity by weight of 99 % or more0 %—31.12.2028
0.3981ex29215119302-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)0 %—31.12.2029
0.4184ex2921511940p-Phenylenediamine (CAS RN 106-50-3)0 %—31.12.2026
0.4498ex29215119502-Chloro-1,4-phenylendiamine (CAS RN 615-66-7) or 2,5-dichloro-1,4-phenylendiamine (CAS RN 20103-09-7)0 %—31.12.2029
0.2612ex2921599015Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1)0 %—31.12.2028
0.3785ex29215990303,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %—31.12.2027
0.3870ex29215990404,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8)0 %—31.12.2029
0.7860ex2922190015Aqueous solution, containing by weight:73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)0 %—31.12.2029
0.5757ex29221900202-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)0 %—31.12.2027
0.7946ex2922190029N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more0 %—31.12.2025
0.3617ex2922190030N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3)0 %—31.12.2029
0.8337ex29221900332-Methoxyethan-1-amine (CAS RN 109-85-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.6947ex29221900352-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)0 %—31.12.2025
0.7179ex2922190040(R)-1-((4-Amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)0 %—31.12.2026
0.7480ex29221900452-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2)0 %—31.12.2029
0.3616ex29221900532-(2-Methoxyphenoxy)ethanamine (CAS RN 1836-62-0) with a purity by weight of 98 % or more0 %—31.12.2029
0.7587ex29221900553-Aminoadamantan-1-ol (CAS RN 702-82-9)0 %—31.12.2029
0.3871ex2922190060N,N,N′-Trimethyl-N′-(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0)0 %—31.12.2029
0.5905ex2922190065trans-4-Aminocyclohexanol (CAS RN 27489-62-9)0 %—31.12.2029
0.7935ex29221900702-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more0 %—31.12.2025
0.5986ex29221900752-Ethoxyethylamine (CAS RN 110-76-9)0 %—31.12.2029
0.4665ex2922190080N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)0 %—31.12.2029
0.5996ex29222100102-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)0 %—31.12.2029
0.2703ex29222100306-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)0 %—31.12.2029
0.2704ex29222100407-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)0 %—31.12.2029
0.3873ex2922210050Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)0 %—31.12.2029
0.5997ex29222100604-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)0 %—31.12.2029
0.8564ex29222900132-(4-Chlorophenoxy)-5-(trifluoromethyl)aniline (CAS RN 349-20-2) with a purity by weight of 98 % or more0 %—31.12.2028
0.2702ex29222900203-Aminophenol (CAS RN 591-27-5)0 %—31.12.2029
0.3982ex29222900255-Amino-o-cresol (CAS RN 2835-95-2)0 %—31.12.2029
0.6624ex29222900301,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)0 %—31.12.2025
0.7642ex2922290033o-Phenetidine (CAS RN 94-70-2)0 %—31.12.2029
0.4627ex29222900654-Trifluoromethoxyaniline (CAS RN 461-82-5)0 %—31.12.2029
0.7481ex29222900674-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1)0 %—31.12.2029
0.2692ex29222900704-Nitro-o-anisidine (CAS RN 97-52-9)0 %—31.12.2029
0.7026ex2922290073Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)0 %—31.12.2026
0.4956ex29222900754-(2-Aminoethyl)phenol (CAS RN 51-67-2)0 %—31.12.2025
0.2696ex29222900803-Diethylaminophenol (CAS RN 91-68-9)0 %—31.12.2029
0.4914ex29223900202-Amino-5-chlorobenzophenone (CAS RN 719-59-5)0 %—31.12.2025
0.7713ex2922390030(2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone (CAS RN 735-06-8)0 %—31.12.2029
0.6761ex29223900355-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)0 %—31.12.2025
0.7371ex29223900452-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9) with a purity by weight of 98 % or more0 %—31.12.2029
0.3546ex2922430010Anthranilic acid (CAS RN 118-92-3)0 %—31.12.2029
0.3547ex2922498510Ornithine aspartate (INNM) (CAS RN 3230-94-2)0 %—31.12.2029
0.5037ex2922498517Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %—31.12.2025
0.5619ex29224985203-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)0 %—31.12.2027
0.8162ex29224985232-Ethylhexyl 4-aminobenzoate (CAS RN 26218-04-2) with a purity by weight of 99 % or more0 %—31.12.2026
0.6340ex2922498525Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)0 %—31.12.2029
0.8234ex29224985334-Amino-2-chlorobenzoic acid (CAS RN 2457-76-3) with a purity by weight of 98 % or more0 %—31.12.2026
0.3544ex2922498540Norvaline (CAS RN 6600-40-4)0 %—31.12.2029
0.8236ex2922498543(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CAS RN 1690340-79-4) with a purity by weight of 98 % or more0 %—31.12.2026
0.3983ex2922498550D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)0 %—31.12.2029
0.8340ex2922498553(S)-ethyl 3-amino-3-phenylpropanoate hemi((2R,3R)-2,3-dihydroxysuccinate) with a purity by weight of 98 % or more0 %—31.12.2027
0.4239ex2922498560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %—31.12.2027
0.8726ex2922498563Glycine hydrochloride (CAS RN 6000-43-7) with a purity by weight of 95 % or more, whether or not containing not more than 5 % of anti-caking agent silicon dioxide (CAS RN 112926-00-8), used to produce food flavourings0 %—31.12.2029
0.6650ex2922498565Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)0 %—31.12.2025
0.7254ex2922498575L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)0 %—31.12.2029
0.7020ex29225000102-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)0 %—31.12.2026
0.7257ex29225000153,5-Diiodothyronine (CAS RN 1041-01-6)0 %—31.12.2027
0.4702ex29225000201-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)0 %—31.12.2029
0.8445ex2922500025L-Threonine (CAS RN 72-19-5)0 %—31.12.2027
0.8473ex2922500045(S)-2-Amino-2-(3-fluoro-5-methoxyphenyl)ethanol hydrochloride (CAS RN 2095692-22-9) with a purity by weight of 98 % or more0 %—31.12.2027
0.8364ex29225000551-{[4-(Benzyloxy)phenyl]-2-(dimethylamino)ethyl}cyclohexanol (CAS RN 93413-61-7) with a purity by weight of 98 % or more0 %—31.12.2027
0.8325ex2922500065[4-[2-(Dimethylamino)ethoxy]phenyl](4-hydroxyphenyl)methanone (CAS RN 173163-13-8) with a purity by weight of 98 % or more0 %—31.12.2027
0.3543ex2923900010Tetramethylammonium hydroxide (CAS RN 75-59-2), in the form of an aqueous solution containing 25 % (±0,5 %) by weight of tetramethylammonium hydroxide0 %—31.12.2029
0.8715ex2923900013Bis(N,N,N-trimethyladamantan-1-aminium) sulfate (CAS RN 1000777-61-6) with a purity by weight of 95 % or more, whether or not in aqueous solution containing 20 % or more Bis(N,N,N-trimethyladamantan-1-aminium) sulfate (CAS RN 1000777-61-6)0 %—31.12.2029
0.8159ex2923900030Tetrabutylammonium tetrahydroborate (CAS RN 33725-74-5) with a purity by weight of 97 % or more0 %—31.12.2026
0.7879ex2923900050Betaine hydrochloride (CAS RN 590-46-5), with a purity by weight of 93 % or more0 %—31.12.2029
0.7089ex2923900055Tetrabutylammonium bromide (CAS RN 1643-19-2)0 %—31.12.2026
0.7615ex2923900065N,N,N-Trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 %0 %—31.12.2029
0.5063ex2923900075Tetraethylammonium hydroxide, in the form of an aqueous solution containing:35 % (±0,5 %) by weight of tetraethylammonium hydroxide,not more than 1000 mg/kg of chloride,not more than 2 mg/kg of iron, andnot more than 10 mg/kg of potassium0 %—31.12.2025
0.3536ex2923900080Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride0 %—31.12.2029
0.6410ex2923900085N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)0 %—31.12.2029
0.2678ex29241900102-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)0 %—31.12.2029
0.8561ex2924190013N-(tert-Butoxycarbonyl)glycine (CAS RN 4530-20-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.8000ex29241900182-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more0 %—31.12.2025
0.8705ex2924190020Tert-butyl N-methyl-N-(2-oxopropyl)carbamate (CAS RN 532410-39-2) with a purity by weight of 90 % or more0 %—31.12.2029
0.4380ex2924190025Methylcarbamate (CAS RN 598-55-0) with a purity by weight of 98 % or more0 %—31.12.2029
0.8027ex2924190028(2S)-2-Amino-5-(carbamoylamino)pentanoic acid; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more0 %—31.12.2025
0.8030ex2924190033(2S)-2-Amino-5-(carbamoylamino)pentanoic acid; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more0 %—31.12.2025
0.6549ex2924190035Acetamide (CAS RN 60-35-5)0 %—31.12.2029
0.8041ex2924190038Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more0 %—31.12.2025
0.8049ex2924190043N6-(tert-Butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more0 %—31.12.2025
0.8283ex2924190048N,N-Dimethylcarbamoyl chloride (CAS RN 79-44-7) with a purity by weight of 99 % or more0 %—31.12.2026
0.8429ex2924190053Aqueous solution of propamocarb hydrochloride (ISOM)(CAS RN 25606-41-1), containing by weight 64 % or more, but not more than 68 % of propamocarb hydrochloride0 %—31.12.2027
0.7060ex29241900552-Propynyl butylcarbamate (CAS RN 76114-73-3)0 %—31.12.2026
0.4160ex2924190060N,N-Dimethylacrylamide (CAS RN 2680-03-7)0 %—31.12.2026
0.5605ex2924190080Tetrabutylurea (CAS RN 4559-86-8)0 %—31.12.2027
0.6266ex29242970172-(Trifluoromethyl)benzamide (CAS RN 360-64-5)0 %—31.12.2029
0.6568ex2924297023Benalaxyl-M (ISO) (CAS RN 98243-83-5)0 %—31.12.2029
0.8153ex29242970252-[2-(Methoxycarbonyl-phenyl-amino)-phenyl]-acetic acid (CAS RN 353497-35-5) with a purity by weight of 98 % or more0 %—31.12.2026
0.7118ex2924297030Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)0 %—31.12.2026
0.8235ex2924297032N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) with a purity by weight of 98 % or more0 %—31.12.2026
0.8621ex2924297034Acetic acid tert-butyl [(1-aminocyclohexyl)methyl]carbamate (1/1) with a purity by weight of 98 % or more0 %—31.12.2028
0.8161ex2924297035N-(1,1-Dimethylethyl)-4-amino-benzamide (CAS RN 93483-71-7) with a purity by weight of 99 % or more0 %—31.12.2026
0.8258ex2924297036N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1) with a purity by weight of 97 % or more0 %—31.12.2026
0.6110ex2924297037Beflubutamid (ISO) (CAS RN 113614-08-7)0 %—31.12.2029
0.8595ex29242970382-Methyl-2-propanyl{(2S,3R)-3-hydroxy-4-[(2-methylpropyl)amino]-1-phenyl-2- butanyl}carbamate (CAS RN 160232-08-6) with a purity by weight of 97 % or more0 %—31.12.2028
0.8696ex2924297039N-[(9H-Fluoren-9-ylmethoxy)carbonyl]glycine (CAS RN 29022-11-5) with a purity by weight of 99 % or more0 %—31.12.2029
0.5066ex2924297040N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)0 %—31.12.2025
0.8697ex2924297041(2S)-6-amino-2-({[(9H-fluoren-9-yl)methoxy]carbonyl}amino)hexanoic acid hydrochloride (CAS RN 139262-23-0) with a purity by weight of 90 % or more0 %—31.12.2029
0.8698ex2924297042N-Benzyloxycarbonylglycine (CAS RN 1138-80-3) with a purity by weight of 99 % or more0 %—31.12.2029
0.5127ex2924297045Propoxur (ISO) (CAS RN 114-26-1)0 %—31.12.2025
0.8183ex2924297046S-Metolachlor (ISO) (CAS RN 87392-12-9) with a purity by weight of 98 % or more0 %—31.12.2026
0.7841ex2924297047(S)-tert-Butyl (1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more0 %—31.12.2029
0.8381ex2924297048(3R)-N-(tert-butoxycarbonyl)-3-amino-4-(2,4,5-trifluorophenyl)butanoic acid (CAS RN 486460-00-8) with a purity by weight of 97 % or more0 %—31.12.2027
0.8346ex2924297049tert-Butyl [(1R,2S,5S)-2-amino-5-(dimethylcarbamoyl)cyclohexyl]carbamate ethanedioate (CAS RN 1210348-34-7) with a purity by weight of 95 % or more0 %—31.12.2027
0.8184ex2924297052Zoxamide (ISO) (CAS RN 156052-68-5) with a purity by weight of 97 % or more0 %—31.12.2026
0.5622ex29242970534-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)0 %—31.12.2027
0.8362ex29242970542-[4-(Benzyloxy)phenyl]-N,N-dimethylacetamide (CAS RN 919475-15-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.5069ex2924297055N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)0 %—31.12.2025
0.8315ex2924297056Valifenalate (ISO) (CAS RN 283159-90-0) with a purity by weight of 98 % or more0 %—31.12.2027
0.8710ex29242970572-(Dimethylaminomethylidene)-4-methoxy-3-oxo-N-[(2,4,6-trifluorophenyl)methyl]butanamide (CAS RN 1846582-17-9) with a purity by weight of 95 % or more0 %—31.12.2029
0.8043ex29242970582-Chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more0 %—31.12.2025
0.6767ex29242970622-Chlorobenzamide (CAS RN 609-66-5)0 %—31.12.2025
0.6766ex2924297064N-(3′,4′-dichloro-5-fluoro[1,1′-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)0 %—31.12.2025
0.7632ex2924297067N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2)0 %—31.12.2029
0.6480ex2924297073Napropamide (ISO) (CAS RN 15299-99-7)0 %—31.12.2029
0.2672ex29242970753-Amino-p-anisanilide (CAS RN 120-35-4)0 %—31.12.2029
0.8060ex29242970785-Amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more0 %—31.12.2025
0.2673ex2924297085p-Aminobenzamide (CAS RN 2835-68-9)0 %—31.12.2029
0.4493ex2924297089Flutolanil (ISO) (CAS RN 66332-96-5)0 %—31.12.2029
0.3691ex29242970923-Hydroxy-2-naphthanilide (CAS RN 92-77-3)0 %—31.12.2029
0.3692ex29242970933-Hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-61-5)0 %—31.12.2029
0.3693ex29242970942′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)0 %—31.12.2029
0.3863ex29242970971,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)0 %—31.12.2029
0.3526ex2925110020Saccharin and its sodium salt0 %—31.12.2029
0.2674ex2925199510N-Phenylmaleimide (CAS RN 941-69-5)0 %—31.12.2029
0.5612ex29251995204,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)0 %—31.12.2027
0.5740ex2925199530N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)0 %—31.12.2027
0.8013ex2925199540N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more0 %—31.12.2025
0.8704ex29251995502-{2-[2-(1,3-Dioxo-2,3-dihydro-1H-isoindol-2-yl)ethoxy]ethoxy}acetic acid (CAS RN 75001-09-1) with a purity by weight of 95 % or more0 %—31.12.2029
0.2934ex2925290010Dicyclohexylcarbodiimide (CAS RN 538-75-0)0 %—31.12.2029
0.5891ex2925290020N-[3-(Dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)0 %—31.12.2029
0.8339ex29252900251-(3-(2-Hydroxyethyl)phenyl)guanidinium methanesulfonate (CAS RN 2101429-50-7) with a purity by weight of 99 % or more0 %—31.12.2027
0.7749ex2925290040N-Amidinosarcosine (CAS RN 57-00-1)0 %—31.12.2029
0.7832ex2925290050(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more0 %—31.12.2029
0.8033ex2925290060Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more0 %—31.12.2025
0.8040ex2925290070Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more0 %—31.12.2025
0.7408ex2926907018Flumethrin (ISO) (CAS RN 69770-45-2)0 %—31.12.2027
0.7466ex29269070192-(4-Amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2)0 %—31.12.2029
0.2668ex29269070202-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)0 %—31.12.2029
0.7458ex29269070214-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9)0 %—31.12.2029
0.7514ex2926907022Acetonitrile (CAS RN 75-05-8)0 %—31.12.2029
0.7805ex29269070242-Hydroxy-2-methylpropiononitrile (CAS RN 75-86-5) with a purity by weight of 99 % or more0 %—31.12.2029
0.5227ex29269070252,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)0 %—31.12.2026
0.6149ex2926907027Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)0 %—31.12.2029
0.8321ex29269070283-Bromo-6-chloro-2-fluorobenzonitrile (CAS RN 943830-79-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.7430ex29269070292-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0) with a purity by weight of 95 % or more0 %—31.12.2027
0.7201ex29269070304,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)0 %—31.12.2026
0.7406ex2926907033Deltamethrin (ISO) (CAS RN 52918-63-5)0 %—31.12.2027
0.7034ex29269070354-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)0 %—31.12.2026
0.3522ex2926907050Alkyl or alkoxyalkyl esters of cyanoacetic acid0 %—31.12.2029
0.8217ex2926907056Methyl 2-cyano-2-propylpentanoate (CAS RN 66546-92-7) with a purity by weight of 97 % or more0 %—31.12.2026
0.4182ex2926907061m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)0 %—31.12.2026
0.4802ex2926907070Methacrylonitrile (CAS RN 126-98-7)0 %—31.12.2029
0.3521ex2926907075Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)0 %—31.12.2029
0.3516ex2926907080Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)0 %—31.12.2029
0.3514ex2926907086Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)0 %—31.12.2029
0.3515ex2926907089Butyronitrile (CAS RN 109-74-0)0 %—31.12.2029
0.2667ex29270000102,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride (CAS RN 2997-92-4)0 %—31.12.2029
0.7337ex29270000252,2′-Azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)0 %—31.12.2027
0.2810ex29270000304′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)0 %—31.12.2029
0.6306ex2927000035C.C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 oC or more but not more than 220 oC used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam3,2 %—31.12.2025
0.2661ex29280090103,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8)0 %—31.12.2029
0.6479ex2928009013Cymoxanil (ISO) (CAS RN 57966-95-7)0 %—31.12.2029
0.6548ex2928009018Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more0 %—31.12.2029
0.6871ex2928009023Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more0 %—31.12.2025
0.4929ex2928009025Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution0 %—31.12.2025
0.6985ex2928009028Pentan-2-one oxime (CAS RN 623-40-5)0 %—31.12.2026
0.5438ex2928009030N-Isopropylhydroxylamine (CAS RN 5080-22-8)0 %—31.12.2026
0.7448ex29280090334-Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7)0 %—31.12.2029
0.8061ex2928009038Aqueous solution of methoxyammonium chloride (CAS RN 593-56-6), containing by weight:30 % or more but not more than 40 % of methoxyammonium chloridenot more than 4 % of hydrochloric acid0 %—31.12.2025
0.8093ex29280090432-(3-Methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more0 %—31.12.2025
0.5919ex2928009045Tebufenozide (ISO) (CAS RN 112410-23-8)0 %—31.12.2029
0.8158ex29280090481-{[(1H-Fluoren-9-ylmetoxi)carbonil]oxi}pyrrolidine-2,5-dione (CAS RN 82911-69-1) with a purity by weight of 98 % or more0 %—31.12.2026
0.6635ex2928009050Aqueous solution of 2,2′-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %0 %—31.12.2025
0.8474ex2928009053Ethyl chloro[(4-methoxyphenyl)hydrazono]acetate (CAS RN 27143-07-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.5918ex2928009055Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)0 %—31.12.2029
0.8731ex2928009063Daminozide (ISO) (CAS RN 1596-84-5) with a purity by weight of 97 % or more0 %—31.12.2029
0.4544ex2928009070Butanone oxime (CAS RN 96-29-7)0 %—31.12.2029
0.5228ex2928009075Metaflumizone (ISO) (CAS RN 139968-49-3)0 %—31.12.2026
0.3510ex2928009080Cyflufenamid (ISO) (CAS RN 180409-60-3)0 %—31.12.2029
0.5827ex2929100020Butyl isocyanate (CAS RN 111-36-4)0 %—31.12.2027
0.4188ex29291000351,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) with a purity by weight of 99 % or more0 %—31.12.2029
0.2660ex2929100040m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)0 %—31.12.2029
0.5033ex29291000452,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) with a purity by weight of 99 % or more0 %—31.12.2029
0.2657ex2929100050m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)0 %—31.12.2029
0.3509ex2929100060Trimethylhexamethylene diisocyanate, mixed isomers0 %—31.12.2029
0.8451ex2929100065Ethyl isocyanate (CAS RN 109-90-0) with a purity by weight of 98 % or more0 %—31.12.2027
0.8701ex2929909070N′,N′′-[(2S,3E,5S)-1,6-Diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) (CAS RN 1247119-27-2) in the form of an aqueous solution containing by weight 70 % or more but not more than 95 % of N′,N′′-[(2S,3E,5S)-1,6-Diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide)0 %—31.12.2029
0.8171ex2929909040N-Butylphosphorothioic triamide (CAS RN 94317-64-3) with a purity by weight of 97 % or more0 %—31.12.2026
0.8172ex2929909050N-Propylphosphorothioic triamide (CAS RN 916809-14-8) with a purity by weight of 97 % or more0 %—31.12.2026
0.8611ex2929909060(2S)-2-[[2-[2-[2-[2-[2-[2-[2-[2-[2-[2-(2-Azidoethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethylamino]-2-oxoethoxy]acetyl]amino]-N-[4-(hydroxymethyl)phenyl]-6-[[(4-methoxyphenyl)-diphenylmethyl]amino]hexanamide (CAS RN 1224601-12-0) with a purity by weight of 98 % or more0 %—31.12.2028
0.4298ex2930200040Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more0 %—31.12.2027
0.8036ex2930909511Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more0 %—31.12.2025
0.8047ex2930909514(E)-N′-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more0 %—31.12.2025
0.6551ex29309095163-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)0 %—31.12.2029
0.5999ex29309095172-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)0 %—31.12.2029
0.7748ex2930909518Dimethyl sulfone (CAS RN 67-71-0)0 %—31.12.2029
0.8050ex29309095194-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more0 %—31.12.2025
0.7799ex29309095204-(4-Methylphenylthio)benzophenone (CAS RN 83846-85-9)0 %—31.12.2029
0.6750ex2930909521[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)0 %—31.12.2026
0.6873ex2930909526Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more0 %—31.12.2025
0.8069ex2930909528Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste or in its crystalline form, witha purity of 74 % or more by weight and,a maximum water content of 23 % by weight0 %—31.12.2025
0.7833ex2930909531(p-Toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more0 %—31.12.2029
0.8152ex29309095322-Methoxy-N-[2-nitro-5-(phenylsulfanyl)phenyl]acetamide (CAS RN 63470-85-9) with a purity by weight of 96 % or more0 %—31.12.2026
0.6584ex29309095332-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)0 %—31.12.2029
0.3811ex2930909535Glutathione (CAS RN 70-18-8)0 %—31.12.2026
0.8510ex2930909536Anhydrous potassium О-isopentyl-dithiocarbonate (CAS RN 928-70-1) with a purity by weight of 90 % or more0 %—31.12.2027
0.8447ex2930909539Thiodiacetic acid (CAS RN 123-93-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.2928ex29309095403,3′-Thiodi(propionic acid) (CAS RN 111-17-1)0 %—31.12.2029
0.8481ex29309095412,2′-Diallyl-4,4′-sulphonyldiphenol (CAS RN 41481-66-7) with a purity by weight of 96 % or more0 %—31.12.2027
0.6167ex2930909543Trimethylsulfoxonium iodide (CAS RN 1774-47-6)0 %—31.12.2029
0.2931ex29309095452-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)0 %—31.12.2029
0.7689ex29309095503-Mercaptopropionic acid (CAS RN 107-96-0)0 %—31.12.2029
0.6617ex2930909553Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)0 %—31.12.2025
0.5114ex2930909555Thiourea (CAS RN 62-56-6)0 %—31.12.2025
0.4629ex29309095643-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)0 %—31.12.2029
0.4296ex2930909568Clethodim (ISO) (CAS RN 99129-21-2)0 %—31.12.2027
0.4187ex29309095784-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)0 %—31.12.2026
0.2999ex2930909580Captan (ISO) (CAS RN 133-06-2)0 %—31.12.2029
0.4694ex2930909581Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)3 %—31.12.2029
0.8694ex2930909582Propane-1,3-dithiol (CAS RN 109-80-8) with a purity by weight of 98 % or more0 %—31.12.2029
0.7985ex29309095881-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more0 %—31.12.2025
0.4094ex2930909589Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates0 %—31.12.2026
0.7070ex29309095931-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8)0 %—31.12.2026
0.7078ex2930909595N-(Cyclohexylthio)phthalimide (CAS RN 17796-82-6)0 %—31.12.2026
0.7086ex2930909597Diphenyl sulphone (CAS RN 127-63-9)0 %—31.12.2026
0.5741ex2931498008Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution0 %—31.12.2027
0.8546ex2931498010Triethyl phosphonoacetate (CAS RN 867-13-0) with a purity by weight of 98 % or more0 %—31.12.2028
0.5492ex2931498013Trioctylphosphine oxide (CAS RN 78-50-2)0 %—31.12.2026
0.5758ex2931498025(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)0 %—31.12.2027
0.7533ex2931498035Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7)0 %—31.12.2029
0.2656ex2931498038N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more0 %—31.12.2029
0.5229ex2931498040Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)0 %—31.12.2026
0.3492ex2931498048Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)0 %—31.12.2029
0.3987ex29314980553-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)0 %—31.12.2029
0.7709ex29315990502-Chloroethylphosphonic acid (CAS RN 16672-87-0) solid or in aqueous solution, with a content by weight of 2-Chloroethylphosphonic acid of 65 % or more0 %—31.12.2029
0.3504ex2931900003Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane0 %—31.12.2029
0.4515ex2931900015Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl0 %—31.12.2029
0.8051ex2931900023Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more0 %—31.12.2025
0.7951ex2931900025N-(3-(Dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more0 %—31.12.2025
0.8063ex2931900028Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more0 %—31.12.2025
0.8272ex2931900030Tert-Butylchlorodimethylsilane (CAS RN 18162-48-6) with a purity by weight of 99 % or more0 %—31.12.2026
0.8316ex29319000382-(Trimethylsilyl)ethoxymethyl chloride (CAS RN 76513-69-4) with a purity by weight of 98 % or more0 %—31.12.2027
0.8442ex2931900040Chlorotrimethylsilane (CAS RN 75-77-4) with a purity by weight of 98 % or more0 %—31.12.2027
0.8640ex2931900043Trimethylindium (CAS RN 3385-78-2) with a purity by weight of 99 % or more0 %—31.12.2028
0.8649ex29319000484-Phenoxybenzeneboronic acid (CAS RN 51067-38-0) with a purity by weight of 98 % or more0 %—31.12.2028
0.4121ex2931900050Trimethylsilane (CAS RN 993-07-7)0 %—31.12.2026
0.8554ex29319000553-(Hydroxymethyl)phenylboronic acid (CAS RN 87199-15-3) with a purity by weight of 95 % or more0 %—31.12.2028
0.8652ex2931900058Trimethylgallium (CAS RN 1445-79-0) with a purity by weight of 99 % or more0 %—31.12.2028
0.3486ex2932130010Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)0 %—31.12.2025
0.4590ex29321400201,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside (CAS RN 56038-13-2) with a purity by weight of 98 % or more0 %—31.12.2029
0.8615ex29321900152-Methylfuran (CAS RN 534-22-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.8636ex2932190025Methyl tetrahydro-2-furancarboxylate (CAS RN 37443-42-8) with a purity by weight of 98 % or more0 %—31.12.2028
0.8605ex2932190035(2S,3S,4S,5R)-3-(3,4-Difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)tetrahydrofuran-2-yl-4-nitrobenzoate (CAS RN 2875066-49-0) with a purity by weight of 97 % or more0 %—31.12.2028
0.4514ex29321900412,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)0 %—31.12.2029
0.8252ex2932190055(3S)-3-[4-[(5-Bromo-2-chlorophenyl)methyl]phenoxy]tetrahydro-furan (CAS RN 915095-89-5) with a purity by weight of 97 % or more0 %—31.12.2026
0.7614ex2932190065Tefuryltrione (ISO) (CAS RN 473278-76-1)0 %—31.12.2029
0.3487ex2932190070Furfurylamine (CAS RN 617-89-0)0 %—31.12.2029
0.5240ex29321900805-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)0 %—31.12.2026
0.5257ex2932209015Coumarin (CAS RN 91-64-5)0 %—31.12.2026
0.7958ex29322090184-Hydroxycoumarin (CAS RN 1076-38-6) with a purity by weight of 98 % or more0 %—31.12.2025
0.7984ex29322090231,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more0 %—31.12.2025
0.8478ex2932209028(R)-3-(3,4-difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)furan-2(5H)-one (CAS RN 2875066-35-4) with a purity by weight of 98 % or more0 %—31.12.2027
0.8532ex29322090336-Cyclohexyl-4-methyl-2H-pyran-2-one (CAS RN 14818-35-0) with a purity of 99 % by weight or more0 %—31.12.2028
0.5611ex2932209040(S)-(-)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)0 %—31.12.2027
0.6094ex29322090452,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)0 %—31.12.2029
0.7283ex2932209050L-Lactide (CAS RN 4511-42-6), D-lactide (CAS RN 13076-17-0), dilactide (CAS RN 95-96-5) or meso-lactide (CAS RN 13076-19-2), each with a purity by weight of 90 % or more0 %—31.12.2027
0.4162ex29322090606′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 29512-49-0)0 %—31.12.2026
0.7812ex2932209063Selamectin (INN) 5Z-isomer (CAS RN 220119-17-5)0 %—31.12.2029
0.6620ex2932209065Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)0 %—31.12.2025
0.4161ex29322090716′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 89331-94-2)0 %—31.12.2026
0.7599ex29322090753-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6)0 %—31.12.2029
0.3990ex2932209080Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)0 %—31.12.2029
0.4403ex2932209084Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)0 %—31.12.2029
0.8528ex29329900033,4-Dihydro-2-methoxy-2H-pyran (CAS RN 4454-05-1) with a purity by weight of 99 % or more0 %—31.12.2028
0.7202ex2932990013(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)0 %—31.12.2026
0.5269ex29329900151,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)0 %—31.12.2026
0.7178ex29329900184-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)0 %—31.12.2026
0.7431ex29329900232-Ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)0 %—31.12.2027
0.5759ex29329900251-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)0 %—31.12.2027
0.7639ex2932990027(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more0 %—31.12.2029
0.8257ex29329900281,4,7,10,13-Pentaoxacyclopentadecane (CAS RN 33100-27-5) with a purity by weight of 90 % or more, the remainder mainly consisting of lineair precursors0 %—31.12.2026
0.7535ex29329900333-Hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8)0 %—31.12.2029
0.8035ex29329900381-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more0 %—31.12.2025
0.6243ex2932990043Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more0 %—31.12.2029
0.5915ex29329900452-Butylbenzofuran (CAS RN 4265-27-4)0 %—31.12.2029
0.8384ex2932990048(20R,25R)-spirost-5-en-3β-ol (CAS RN 512-04-9) with a purity by weight of 95 % or more0 %—31.12.2027
0.4907ex29329900507-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)0 %—31.12.2029
0.4063ex29329900513-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) with a purity by weight of 98 % or more0 %—31.12.2027
0.6771ex29329900654,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)0 %—31.12.2025
0.7978ex29329900683,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more0 %—31.12.2025
0.7930ex29329900735-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more0 %—31.12.2025
0.7936ex2932990078Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more0 %—31.12.2025
0.7954ex29329900836,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more0 %—31.12.2025
0.3697ex29329900851,3:2,4-bis-O-(3,4-Dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)0 %—31.12.2029
0.6262ex2933199015Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more0 %—31.12.2029
0.6261ex29331990253-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)0 %—31.12.2029
0.7836ex29331990273-(3,3,3-Trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more0 %—31.12.2029
0.7811ex2933199033Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine0 %—31.12.2029
0.8353ex29331990384,5-Dimethyl-1H-pyrazole-3-carboxylic acid (CAS RN 89831-40-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.3877ex2933199040Edaravone (INN) (CAS RN 89-25-8)0 %—31.12.2029
0.7938ex2933199043tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more0 %—31.12.2025
0.7119ex29331990455-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)0 %—31.12.2026
0.8046ex29331990481-(3-Iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more0 %—31.12.2025
0.3992ex2933199050Fenpyroximate (ISO) (CAS RN 134098-61-6)0 %—31.12.2029
0.8240ex29331990533-[2-(Dispiro[2.0.24.13]heptan-7-yl)ethoxy]-1H-pyrazole-4-carboxylic acid (CAS RN 2608048-67-3) with a purity by weight of 98 % or more0 %—31.12.2026
0.8603ex29331990581H-Pyrazole (CAS RN 288-13-1) with a purity by weight of 98 % or more0 %—31.12.2028
0.4494ex2933199060Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)0 %—31.12.2029
0.8613ex29331990681-Methyl-1H-pyrazol-4-amine hydrochloride (CAS RN 127107-23-7) with a purity by weight of 95 % or more0 %—31.12.2028
0.4404ex29331990704,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)0 %—31.12.2029
0.8312ex2933210045Sodium (5S,8S)-8-methoxy-2,4-dioxo-1,3-diazaspiro[4.5]decan-3-ide (CAS RN 1400584-86-2) with a purity by weight of 90 % or more0 %—31.12.2026
0.4084ex29332100501-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)0 %—31.12.2026
0.6835ex29332100551-Aminohydantoin hydrochloride (CAS RN 2827-56-7)0 %—31.12.2025
0.4088ex2933210060DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)0 %—31.12.2026
0.5115ex29332100805,5-Dimethylhydantoin (CAS RN 77-71-4)0 %—31.12.2025
0.5972ex2933299015Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)0 %—31.12.2029
0.8150ex2933299020tert-Butyl (2S)-2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8) with a purity by weight of 98 % or more0 %—31.12.2026
0.7937ex29332990231,1′-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more0 %—31.12.2025
0.8452ex2933299038Cyazofamid (ISO) (CAS RN 120116-88-3) with a purity by weight of 94 % or more0 %—31.12.2027
0.8639ex29332990432-Octyl-4,5-dihydro-1H-imidazole (CAS RN 10443-60-4) with a purity by weight of 95 % or more0 %—31.12.2028
0.5215ex29332990601-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)0 %—31.12.2026
0.7120ex29332990752,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)0 %—31.12.2026
0.5821ex2933299080Imazalil (ISO) (CAS RN 35554-44-0)0 %—31.12.2027
0.641529333950Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)0 %—31.12.2029
0.8574ex2933399904Methyl 4-aminopicolinate (CAS RN 71469-93-7) with a purity by weight of 98 % or more0 %—31.12.2028
0.8524ex29333999052,6-Bis-[1-(2-tert-butylphenylimino)-ethyl]pyridine (CAS RN 204203-17-8) with a purity by weight of 95 % or more0 %—31.12.2028
0.8576ex2933399906Tert-butyl (3S)-3-hydroxypiperidine-1-carboxylate (CAS RN 143900-44-1) with a purity by weight of 97 % or more0 %—31.12.2028
0.8535ex29333999075-Bromo-2-methoxypyridine (CAS RN 13472-85-0) with a purity by weight of 99 % or more0 %—31.12.2028
0.8485ex2933399908Fluazinam (ISO) (CAS RN 79622-59-6) with a purity by weight of 97 % or more0 %—31.12.2027
0.7186ex29333999102-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)0 %—31.12.2026
0.6462ex29333999112-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)0 %—31.12.2029
0.5608ex29333999122,3-Dichloropyridine (CAS RN 2402-77-9)0 %—31.12.2027
0.8238ex2933399915(S)-6-Bromo-2-(4-(3-(1,3-dioxoisoindolin-2-yl)propyl)-2,2-dimethylpyrrolidin-1-yl)nicotinamide (CAS RN 2606972-45-4) with a purity by weight of 98 % or more0 %—31.12.2026
0.8239ex2933399918Perfluorophenyl 6-fluoropyridine-2-sulfonate (CAS RN 2608048-81-1) with a purity by weight of 98 % or more0 %—31.12.2026
0.6545ex2933399921Boscalid (ISO) (CAS RN 188425-85-6)0 %—31.12.2029
0.8329ex2933399922N-(5-bromo-3-methylpyridin-2-yl)-N-methylbenzamide (CAS RN 446299-80-5) with a purity by weight of 98 % or more0 %—31.12.2027
0.4594ex29333999242-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)0 %—31.12.2029
0.7091ex2933399927Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)0 %—31.12.2026
0.6368ex2933399928Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)0 %—31.12.2029
0.8068ex29333999304-Amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more0 %—31.12.2025
0.6458ex29333999312-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)0 %—31.12.2029
0.5241ex29333999322-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)0 %—31.12.2026
0.7181ex29333999335-(3-Chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)0 %—31.12.2026
0.8420ex2933399934Pyridin-3-ol (CAS RN 109-00-2) with a purity by weight of 98 % or more0 %—31.12.2027
0.3878ex2933399935Aminopyralid (ISO) (CAS RN 150114-71-9)0 %—31.12.2029
0.7296ex29333999361-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)0 %—31.12.2027
0.5230ex2933399937Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)0 %—31.12.2026
0.7348ex2933399938(2-Chloropyridin-3-yl) methanol (CAS RN 42330-59-6)0 %—31.12.2027
0.8356ex29333999402-Hydroxypyridine-N-oxide (CAS RN 13161-30-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.8266ex2933399942Glasdegib maleate (INN) (CAS RN 2030410-25-2) with a purity by weight of 98 % or more0 %—31.12.2026
0.8711ex2933399944Fluroxypyr-meptyl (CAS RN 81406-37-3) with a purity by weight of 95 % or more0 %—31.12.2029
0.8699ex29333999452,4-Dichloropyridine-3-carboxaldehyde (CAS RN 134031-24-6) with a purity by weight of 95 % or more0 %—31.12.2029
0.4706ex2933399947(-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)0 %—31.12.2026
0.4749ex2933399948Flonicamid (ISO) (CAS RN 158062-67-0)0 %—31.12.2029
0.8335ex29333999492-Phenyl-2-(2-pyridyl)acetamide (CAS RN 7251-52-7) with a purity by weight of 98 % or more0 %—31.12.2027
0.6812ex2933399950N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) with a purity by weight of 98 % or more0 %—31.12.2029
0.8709ex29333999512-Amino-3-bromo-5-nitropyridine (CAS RN 15862-31-4) with a purity by weight of 98 % or more0 %—31.12.2029
0.8637ex29333999535-Methyl-2-pyridylamine (CAS RN 1603-41-4) with a purity by weight of 99 % or more0 %—31.12.2028
0.8729ex29333999542,5-Dichloro-4,6-dimethylpyridine-3-carbonitrile (CAS RN 91591-63-8) with a purity by weight of 99 % or more0 %—31.12.2029
0.4646ex2933399955Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more0 %—31.12.2029
0.8618ex29333999562-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl]methyl]sulfanyl]1H-benzimidazole (CAS RN 103577-40-8) with a purity by weight of 99 % or more0 %—31.12.2028
0.5760ex2933399957Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)0 %—31.12.2027
0.8624ex2933399958Tert-butyl N-[5-(trifluoromethyl)pyridin-3-yl]carbamate (CAS RN 1187055-61-3) with a purity by weight of 98 % or more0 %—31.12.2028
0.2750ex29333999602-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0) with a purity by weight of 90 % or more0 %—31.12.2029
0.7577ex2933399962Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4)0 %—31.12.2029
0.8527ex29333999631-Methyl-4-piperidone (CAS RN 1445-73-4) with a purity by weight of 97 % or more0 %—31.12.2028
0.3602ex2933399965Acetamiprid (ISO) (CAS RN 135410-20-7)0 %—31.12.2029
0.8656ex2933399966(2S,4S)-4-Ethoxy-2-[4-(methoxycarbonyl)phenyl]piperidin-1-ium(2Z)-3-carboxyprop-2-enoate (CAS RN 2408761-21-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.7616ex29333999681-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more0 %—31.12.2029
0.5494ex29333999702,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)0 %—31.12.2026
0.8707ex2933399972N-[(1S,5R)-8-Benzyl-8-azabicyclo[3.2.1]octane-3-yl]-2-methylpropanamide (CAS RN 376348-67-3) with a purity by weight of 98 % or more0 %—31.12.2029
0.7737ex29333999736-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine hydrochloride0 %—31.12.2029
0.8072ex2933399975Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more0 %—31.12.2025
0.7813ex2933399976Apalutamide (INN) (CAS RN 956104-40-8)0 %—31.12.2029
0.7818ex2933399978Niraparib tosylate monohydrate (INNM) (CAS RN 1613220-15-7)0 %—31.12.2029
0.8074ex2933399980Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more0 %—31.12.2025
0.7906ex29333999814-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more0 %—31.12.2029
0.7866ex2933399982Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a dry weight purity of 92 % or more0 %—31.12.2029
0.7976ex29333999832-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more0 %—31.12.2025
0.7925ex2933399984Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more0 %—31.12.2025
0.5129ex29333999852-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)0 %—31.12.2025
0.7981ex29333999863-(N-Hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more0 %—31.12.2025
0.7939ex29333999876-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more0 %—31.12.2025
0.8096ex29333999891-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more0 %—31.12.2025
0.3603ex2933491010Quinmerac (ISO) (CAS RN 90717-03-6)0 %—31.12.2029
0.4525ex29334910203-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)0 %—31.12.2029
0.6339ex29334910404,7-Dichloroquinoline (CAS RN 86-98-6)0 %—31.12.2029
0.6773ex29334910501-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)0 %—31.12.2025
0.7098ex2933499025Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)0 %—31.12.2026
0.4927ex2933499030Quinoline (CAS RN 91-22-5)0 %—31.12.2025
0.8037ex29334990552-(tert-Butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more0 %—31.12.2025
0.3880ex2933499070Quinolin-8-ol (CAS RN 148-24-3)0 %—31.12.2029
0.8358ex29334990752-Methyl-4-(1-methyl-1H-1,2,4-triazol-5-yl)quinolin-8-ol (CAS RN 1174132-59-2) with a purity by weight of 98 % or more0 %—31.12.2027
0.8556ex2933499085(2R,4S)-2-Ethyl-6-(trifluoromethyl)-1,2,3,4-tetrahydroquinolin-4-amine methanesulfonate (CAS RN 952582-02-4) with a purity by weight of 95 % or more0 %—31.12.2028
0.4043ex2933520010Malonylurea (barbituric acid) (CAS RN 67-52-7)0 %—31.12.2026
0.6468ex29335995106-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)0 %—31.12.2029
0.6151ex29335995132-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)0 %—31.12.2029
0.8597ex29335995142-Chloro-7-cyclopentyl-N,N-dimethyl-7H-pyrrolo[2,3-d]pyrimidine-6-carboxamide (CAS RN 1211443-61-6) with a purity by weight of 97 % or more0 %—31.12.2028
0.2578ex2933599515Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)0 %—31.12.2029
0.8580ex2933599516Tert-butyl 4-(6-aminopyridin-3-yl)piperazine-1-carboxylate (CAS RN 571188-59-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.8555ex2933599519Tert-butyl 4-[(2-chloropyrimidin-5-yl)oxy]butanoate (CAS RN 945771-55-1) with a purity by weight of 95 % or more0 %—31.12.2028
0.2745ex29335995202,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)0 %—31.12.2029
0.6763ex2933599521N-(2-Oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)0 %—31.12.2025
0.5912ex29335995272-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)0 %—31.12.2029
0.8157ex29335995292-Amino-4-(4-methylpiperazin-1-yl) benzoic acid tert-butyl ester (CAS RN 1034975-35-3) with a purity by weight of 95 % or more0 %—31.12.2026
0.8376ex2933599531Sotorasib (INN) (CAS RN 2296729-00-3) with a purity by weight of 99 % or more0 %—31.12.2027
0.8456ex29335995325-Chloro-3-nitropyrazolo[1,5-a]pyrimidine (CAS RN 1363380-51-1) with a purity by weight of 98 % or more0 %—31.12.2027
0.6240ex29335995334,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)0 %—31.12.2029
0.7370ex29335995346-chloro-1,3-dimethyluracil (CAS RN 6972-27-6) with a purity by weight of 97 % or more0 %—31.12.2029
0.7345ex29335995361-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8) with a purity by weight of 98 % or more0 %—31.12.2029
0.8248ex29335995385-(5-Chlorosulfonyl-2-ethoxyphenyl)-1-methyl-3-propyl-1,6-dihydro-7H-pyrazolo[4,3-d]pyrimidin-7-one (CAS RN 139756-22-2) with a purity by weight of 98 % or more0 %—31.12.2026
0.8243ex29335995412-(4-Phenoxyphenyl)-7-(piperidin-4-yl)-4,5,6,7-tetrahydropyrazolo[1,5-a]pyrimidine-3-carbonitrile (CAS RN 2190506-57-9) with a purity by weight of 98 % or more0 %—31.12.2026
0.8056ex29335995422-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more0 %—31.12.2025
0.8484ex29335995441,4,5,6-Tetrahydro-1,2-dimethylpyrimidine (CAS RN 4271-96-9) with a purity by weight of 98 % or more0 %—31.12.2027
0.4704ex29335995451-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)0 %—31.12.2029
0.8488ex2933599546Trilaciclib (CAS RN 1374743-00-6) with a purity by weight of 99 % or more0 %—31.12.2027
0.6677ex29335995476-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more0 %—31.12.2025
0.4699ex29335995502-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)0 %—31.12.2029
0.8612ex2933599551(1R,5S)-8-Benzyl-3,8-diazabicyclo[3.2.1]octane; 4-(4-hydroxyphenyl)phenol (2:1) (CAS RN 2642049-87-2) with a purity by weight of 95 % or more0 %—31.12.2028
0.6987ex29335995526-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more0 %—31.12.2026
0.8602ex29335995542-Chloro-4-methylpyrimidine (CAS RN 13036-57-2) with a purity by weight of 99 % or more0 %—31.12.2028
0.2744ex29335995602,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)0 %—31.12.2029
0.8717ex29335995614-Methyl-7H-pyrrolo[2,3-d]pyrimidine (CAS RN 945950-37-8) with a purity by weight of 98 % or more0 %—31.12.2029
0.7578ex29335995631-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0)0 %—31.12.2029
0.8730ex2933599564Thiopental (INNM) (CAS RN 76-75-5) with a purity by weight of 98 % or more0 %—31.12.2029
0.4772ex29335995651-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)0 %—31.12.2029
0.8700ex2933599566Piperazin-2-one (CAS RN 5625-67-2) with a purity by weight of 96 % or more0 %—31.12.2029
0.7825ex2933599568Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more0 %—31.12.2029
0.2735ex2933599570N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)0 %—31.12.2029
0.5542ex29335995773-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)0 %—31.12.2027
0.7071ex29335995875-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)0 %—31.12.2026
0.6621ex29336980152-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)0 %—31.12.2025
0.6951ex2933698017Benzoguanamine (CAS RN 91-76-9)0 %—31.12.2026
0.7721ex29336980231,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)0 %—31.12.2029
0.7600ex2933698027Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0)0 %—31.12.2029
0.7952ex29336980332,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more0 %—31.12.2025
0.5272ex2933698040Troclosene sodium (INNM) (CAS RN 2893-78-9)0 %—31.12.2026
0.8718ex29336980434-(4,6-Bis((biphenyl-4-yl)-1,3,5-triazine-2-yl)-1,3-benzodiole (CAS RN 182918-16-7) with a purity by weight of 96 % or more0 %—31.12.2029
0.7464ex29336980452-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6)0 %—31.12.2029
0.5131ex2933698055Terbutryn (ISO) (CAS RN 886-50-0) for use as a raw material for the production of technical preservatives, in other sectors than for pesticides0 %—31.12.2025
0.4957ex2933698060Cyanuric acid (CAS RN 108-80-5)0 %—31.12.2025
0.6127ex29336980651,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)0 %—31.12.2029
0.6477ex2933698075Metamitron (ISO) (CAS RN 41394-05-2)0 %—31.12.2029
0.3882ex2933698080Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)0 %—31.12.2029
0.6960ex2933790015Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)0 %—31.12.2026
0.8354ex2933790023(S)-2-Amino-3-[(S)-2-oxopyrrolidin-3-yl]propanamide hydrochloride (CAS RN 2628280-48-6) with a purity by weight of 95 % or more0 %—31.12.2027
0.7346ex2933790025Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)0 %—31.12.2029
0.4294ex29337900305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %—31.12.2027
0.8038ex29337900451-Phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more0 %—31.12.2025
0.8203ex2933790055(3S,4R)-3-Amino-4-hydroxypyrrolidin-2-one hydrochloride (CAS RN 2446872-13-3) with a purity by weight of 98 % or more0 %—31.12.2026
0.8212ex29337900651-Dodecyl-2-pyrrolidone (CAS RN 2687-96-9) with a purity by weight of 98 % or more0 %—31.12.2026
0.4985ex2933790070(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)0 %—31.12.2025
0.8351ex2933790075N-(n-octyl)-2-pyrrolidone (CAS RN 2687-94-7) with a purity by weight of 99 % or more0 %—31.12.2027
0.8545ex29337900853,5-Dibromo-1-methyl-2(1H)-pyridinone (CAS RN 14529-54-5) with a purity by weight of 97 % or more0 %—31.12.2028
0.8547ex29339980013-Cyanoindole (CAS RN 5457-28-3) with a purity by weight of 98 % or more0 %—31.12.2028
0.8548ex2933998002(S)-1-Benzyl-3-pyrrolidinol (CAS RN 101385-90-4) with a purity by weight of 98 % or more0 %—31.12.2028
0.8581ex2933998003Tert-butyl 4-formyl-5-methoxy-7-methyl-1H-indole-1-carboxylate (CAS RN 1481631-51-9) with a purity by weight of 97 % or more0 %—31.12.2028
0.8523ex2933998004(S)-2,5-Dihydro-pyrrole-1,2-dicarboxylic acid 1-tert-butyl ester 2-methyl ester (CAS RN 74844-93-2) with a purity by weight of 97 % or more0 %—31.12.2028
0.8156ex29339980074-(2-Oxo-2,3-dihydro-1H-benzimidazol-1-yl)butanoic acid (CAS RN 3273-68-5) with a purity by weight of 98 % or more0 %—31.12.2026
0.8180ex2933998008Prothioconazole (ISO) (CAS RN 178928-70-6) with a purity by weight of 98 % or more0 %—31.12.2026
0.8202ex29339980095,7-Difluoro-2-(4-fluorophenyl)-1H-indole (CAS RN 901188-04-3) with a purity by weight of 98 % or more0 %—31.12.2026
0.8324ex2933998010(R)-2-(2,5-difluorophenyl)pyrrolidine hydrochloride (CAS RN 1218935-60-4) with a purity by weight of 98 % or more0 %—31.12.2027
0.5243ex29339980135-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)0 %—31.12.2026
0.6872ex2933998016Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more0 %—31.12.2025
0.8290ex29339980182-(2-Ethoxyphenyl)-5-methyl-7-propylimidazolo[5,1-f][1,2,4]-triazin-4(3H)-one (CAS RN 224789-21-3) with a purity by weight of 95 % or more0 %—31.12.2026
0.2732ex29339980202-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)0 %—31.12.2029
0.6829ex29339980211-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)0 %—31.12.2025
0.8249ex2933998022Dibenz[b,f]azepine-5-carbonyl chloride (CAS RN 33948-22-0) with a purity by weight of 98 % or more0 %—31.12.2026
0.5625ex29339980241,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)0 %—31.12.2027
0.8089ex29339980256-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more0 %—31.12.2025
0.8418ex2933998026Benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluorophosphate (CAS RN 128625-52-5) with a purity by weight of 97 % or more0 %—31.12.2027
0.6409ex29339980275,6-Dimethylbenzimidazole (CAS RN 582-60-5)0 %—31.12.2029
0.8357ex29339980287-(2-Methyl-4-nitrophenoxy)-[1,2,4]triazolo[1,5-a]pyridine (CAS RN 937263-44-0) with a purity by weight of 98 % or more0 %—31.12.2027
0.3593ex2933998030Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)0 %—31.12.2029
0.8284ex29339980321H-1,2,3-Triazole (CAS RN 288-36-8) or 2H-1,2,3-triazole (CAS RN 288-35-7) with a purity by weight of 99 % or more0 %—31.12.2026
0.6249ex2933998033Penconazole (ISO) (CAS RN 66246-88-6)0 %—31.12.2029
0.7043ex29339980342,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)0 %—31.12.2026
0.8643ex29339980352-[6-Methyl-2-(4-methylphenyl)imidazo[1,2-a]pyridin-3-yl]acetic acid (CAS RN 189005-44-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.4695ex29339980378-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)0 %—31.12.2029
0.7045ex2933998038(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)0 %—31.12.2026
0.3591ex2933998040trans-4-Hydroxy-L-proline (CAS RN 51-35-4)0 %—31.12.2029
0.7273ex29339980415-[4′-(Bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)0 %—31.12.2027
0.7185ex2933998042(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)0 %—31.12.2026
0.8455ex29339980434-([1,2,4]Triazolo[1,5-a]pyridin-7-yloxy)-3-methylaniline (CAS RN 937263-71-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.7269ex2933998046(S)-Indoline-2-carboxylic acid (CAS RN 79815-20-6)0 %—31.12.2027
0.7410ex29339980485-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)0 %—31.12.2027
0.8713ex2933998049Tert-butyl (2S)-2-carbamoylpyrrolidine-1-carboxylate (CAS RN 35150-07-3) with a purity by weight of 97 % or more0 %—31.12.2029
0.8722ex2933998050Tert-butyl (3R)-3-aminopyrrolidine-1-carboxylate (CAS RN 147081-49-0) with a purity by weight of 97 % or more0 %—31.12.2029
0.8702ex2933998051(1R,5R)-Ethyl 3-benzyl-3-azabicyclo[3.1.0]hexane-1-carboxylate hydrochloride (CAS RN 2914217-81-3) with a purity by weight of 97 % or more0 %—31.12.2029
0.8703ex2933998052(S)-2-Methylpyrrolidine-2-carboxylic acid hydrochloride (CAS RN 1508261-86-6) with a purity by weight of 98 % or more0 %—31.12.2029
0.6599ex29339980543-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)0 %—31.12.2025
0.4585ex2933998055Pyridaben (ISO) (CAS RN 96489-71-3)0 %—31.12.2029
0.7457ex2933998056Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1) with a purity by weight of 98 % or more0 %—31.12.2029
0.5901ex29339980572-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)0 %—31.12.2029
0.7927ex29339980602-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more0 %—31.12.2025
0.7624ex2933998061(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1)0 %—31.12.2029
0.7680ex2933998063L-Prolinamide (CAS RN 7531-52-4)0 %—31.12.2029
0.8359ex2933998064(1R,2S,5S)-3-[(S)-3,3-dimethyl-2-(2,2,2-trifluoroacetamido)butanoyl]-6,6-dimethyl-3-azabicyclo[3.1.0]hexane-2-carboxylic acid (CAS RN 2755812-45-2) with a purity by weight of 95 % or more0 %—31.12.2027
0.5468ex2933998067Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)0 %—31.12.2026
0.7679ex29339980685-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-Amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2′,1′-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9)0 %—31.12.2029
0.8053ex29339980695-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more0 %—31.12.2025
0.7971ex29339980705-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more0 %—31.12.2025
0.4384ex293399807110-Methoxyiminostilbene (CAS RN 4698-11-7)0 %—31.12.2029
0.4503ex29339980721,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)0 %—31.12.2029
0.7759ex29339980751-[Bis(dimethylamino)methylene]-1H-benzotriazolium hexafluorophosphate(1-) 3-oxide (CAS RN 94790-37-1)0 %—31.12.2029
0.8054ex29339980762-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more0 %—31.12.2025
0.8064ex29339980779-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more0 %—31.12.2025
0.4382ex29339980783-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)0 %—31.12.2029
0.8014ex2933998080Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more0 %—31.12.2025
0.4164ex29339980811,2,3-Benzotriazole (CAS RN 95-14-7)0 %—31.12.2026
0.4165ex2933998082Tolytriazole (CAS RN 29385-43-1)0 %—31.12.2029
0.6933ex2933998087Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more0 %—31.12.2025
0.3579ex2934100010Hexythiazox (ISO) (CAS RN 78587-05-0)0 %—31.12.2029
0.2725ex29341000202-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)0 %—31.12.2029
0.5538ex2934100035(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)0 %—31.12.2027
0.6264ex29341000452-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)0 %—31.12.2029
0.4750ex2934100060Fosthiazate (ISO) (CAS RN 98886-44-3)0 %—31.12.2029
0.7312ex2934208015Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)0 %—31.12.2027
0.4346ex29342080251,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one0 %—31.12.2027
0.8712ex29342080353-Methyl-1,2-benzothiazole-1,1-dioxide (CAS RN 34989-82-7) with a purity by weight of 95 % or more0 %—31.12.2029
0.4910ex2934208070N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)0 %—31.12.2025
0.5537ex29343090102-Methylthiophenothiazine (CAS RN 7643-08-5)0 %—31.12.2027
0.8571ex2934999004Silthiofam (ISO) (CAS RN 175217-20-6) with a purity by weight of 98 % or more0 %—31.12.2028
0.8551ex2934999005(S)-2-Methyl-1-(6-nitropyridin-3-yl)-4-(oxetan-3-yl)piperazine (CAS RN 1895867-67-0) with a purity by weight of 97 % or more0 %—31.12.2028
0.8560ex2934999006Cis-[2-(2,4-Dichlorodiphenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4yl]methyl-4-methylbenzenesulfonate (CAS RN 134071-44-6) with a purity by weight of 99 % or more0 %—31.12.2028
0.8487ex2934999007Cedazuridine (INN) (CAS RN 1141397-80-9) with a purity by weight of 99 % or more0 %—31.12.2027
0.8472ex2934999008(R)-tert-butyl 2-(6-(5-chloro-2-((tetrahydro-2H-pyran-4-yl)amino)pyrimidin-4-yl)-1-oxoisoindolin-2-yl)propanoate (CAS RN 2095665-45-3) with a purity by weight of 98 % or more0 %—31.12.2027
0.8449ex29349990093-[2-{(2R,3S)-3-[(1R)-1-{[tert-butyl(dimethyl)silyl]oxy}ethyl]-4-oxoazetidin-2-yl}propanoyl]-4,4-dimethyl-1,3-oxazolidin-2-one (isomeric mixture of CAS RNs 114341-89-8 and 114418-63-2) with a purity by weight of 99 % or more0 %—31.12.2027
0.6492ex2934999010Fluralaner (INN) (CAS RN 864731-61-3)0 %—31.12.2029
0.8388ex2934999011Aqueous solution of d(P-thio)(T-G-A-C-T-G-T-G-A-A-C-G-T-T-C-G-A-G-A-T-G-A) deoxyribonucleic acid (CAS RN 937402-51-2), containing by weight 15 % or more, but not more than 25 % of oligodeoxynucleotide0 %—31.12.2027
0.5924ex2934999012Dimethomorph (ISO) (CAS RN 110488-70-5)0 %—31.12.2029
0.8348ex2934999013(6S)-6-methyl-5,6-Dihydro-4H-thieno[2,3-b]thiopyran4-one-7,7-dioxide (CAS RN 148719-91-9) with a purity by weight of 98 % or more0 %—31.12.2027
0.8326ex29349990142-Mercaptoadenosine (CAS RN 43157-50-2) with a purity by weight of 98 % or more0 %—31.12.2027
0.7843ex2934999017(S)-4-(Tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more0 %—31.12.2029
0.8250ex2934999018Methyl (1R,3R)-1-(1,3-benzodioxol-5-yl)-2-(2-chloroacetyl)-1,3,4,9-tetrahydropyrido[5,4-b]indole-3-carboxylate (CAS RN 171489-59-1) with a purity by weight of 99 % or more0 %—31.12.2026
0.8720ex2934999019(4R,6S)-6-Methyl-7,7-dioxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-4-ol (CAS RN 147128-77-6) with a purity by weight of 94 % or more0 %—31.12.2029
0.4715ex2934999020Thiophene (CAS RN 110-02-1)0 %—31.12.2029
0.8253ex29349990224-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) with a purity by weight of 97 % or more0 %—31.12.2026
0.4942ex29349990252,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)0 %—31.12.2025
0.6252ex29349990264-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)0 %—31.12.2029
0.6362ex29349990272-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)0 %—31.12.2029
0.5242ex293499902811-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)0 %—31.12.2026
0.4700ex2934999030Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)0 %—31.12.2029
0.8724ex2934999031Thenoic acid (CAS RN 1918-77-0) with a purity by weight of 97 % or more0 %—31.12.2029
0.8267ex2934999035Nusinersen sodium (INNM) (CAS RN 1258984-36-9) with a purity by weight of 95 % or more0 %—31.12.2026
0.5813ex29349990374-Propan-2-ylmorpholine (CAS RN 1004-14-4)0 %—31.12.2027
0.8642ex29349990382-Chloro-9H-thioxanthen-9-one (CAS RN 86-39-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.6824ex29349990394-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)0 %—31.12.2025
0.8094ex29349990402,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more0 %—31.12.2025
0.6823ex293499904111-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)0 %—31.12.2025
0.8380ex29349990454-[4-[(5s)-5-(Aminomethyl)-2-oxo-3-oxazolidinyl] phenyl]-3-morpholinone, hydrochloride (CAS RN 898543-06-1) with a purity by weight of 98 % or more0 %—31.12.2027
0.5453ex2934999048Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)0 %—31.12.2026
0.7188ex2934999049Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)0 %—31.12.2026
0.8601ex2934999050Vutrisiran (INN) (CAS RN 1867157-35-4) with a purity by weight of 98 % or more0 %—31.12.2028
0.8330ex2934999051Uridine 5′-triphosphate trisodium salt (CAS RN 19817-92-6) with a dry weight purity of 90 % or more0 %—31.12.2027
0.8031ex2934999055Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more0 %—31.12.2025
0.7297ex29349990561-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)0 %—31.12.2027
0.3575ex2934999058Dimethenamide-P (ISO) (CAS RN 163515-14-8)0 %—31.12.2029
0.7387ex2934999059Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)0 %—31.12.2027
0.2718ex2934999060DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)0 %—31.12.2029
0.7459ex29349990615-(1,2-Dithiolan-3-yl)valeric acid (CAS RN 1077-28-7)0 %—31.12.2029
0.7537ex2934999063(2b,3a,5a,16b,17b)-2-(Morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4)0 %—31.12.2029
0.7449ex29349990642-Bromo-5-benzoylthiophene (CAS RN 31161-46-3)0 %—31.12.2029
0.7926ex2934999065Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more0 %—31.12.2025
0.4512ex2934999066Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)0 %—31.12.2029
0.7842ex29349990693-Methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more0 %—31.12.2029
0.7944ex29349990701,3,4-Thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more0 %—31.12.2025
0.8289ex29349990713,4-Dichloro-1,2,5-thiadiazole (CAS RN 5728-20-1) with a purity by weight of 99 % or more0 %—31.12.2026
0.8317ex29349990722-Trifluoromethyl-9-allyl-9-thioxanthen-ol (CAS RN 850808-70-7) with a purity by weight of 98 % or more0 %—31.12.2027
0.4249ex29349990742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %—31.12.2027
0.4052ex2934999075(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)0 %—31.12.2026
0.8221ex2934999077Tazemetostat (INN) (CAS 1403254-99-8) with a purity by weight of 99 % or more and its salts0 %—31.12.2026
0.8048ex29349990811-(4-Aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more0 %—31.12.2025
0.7815ex2934999082Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more0 %—31.12.2029
0.4643ex2934999083Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more0 %—31.12.2029
0.8222ex2934999085Gilteritinib (INN) (CAS 1254053-43-4) with a purity by weight of 98 % or more and its salts0 %—31.12.2026
0.5133ex2934999086Dithianon (ISO) (CAS RN 3347-22-6)0 %—31.12.2025
0.5136ex29349990872,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)0 %—31.12.2025
0.7738ex2934999088(7S,9aS)-7-((Benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine dioxalate (CAS RN 1268364-46-0)0 %—31.12.2029
0.6486ex2935909010Florasulam (ISO) (CAS RN 145701-23-1)0 %—31.12.2029
0.8479ex29359090162-Bromo-N-(4,5-dimethyl-1,2-oxazol-3-yl)-N-(methoxymethyl) benzene-1-sulfonamide (CAS RN 415697-57-3) with a purity by weight of 97 % or more0 %—31.12.2027
0.8173ex29359090184-Amino-2,5-dimethoxy-N-methylbenzenesulfonamide (CAS RN 49701-24-8) with a purity by weight of 98 % or more0 %—31.12.2026
0.8174ex29359090194-Amino-2,5-dimethoxy-N-phenylbenzenesulphonamide (CAS RN 52298-44-9) with a purity by weight of 98 % or more0 %—31.12.2026
0.3565ex2935909020Toluenesulphonamides0 %—31.12.2029
0.8224ex2935909021Encorafenib (INN) (CAS 1269440-17-6) with a purity by weight of 99 % or more0 %—31.12.2026
0.8276ex2935909022Methyl 2-(chlorosulfonyl)-4-(methylsulfonamidomethyl)benzoate (CAS RN 393509-79-0) with a purity by weight of 90 % or more0 %—31.12.2026
0.5239ex2935909023N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)0 %—31.12.2026
0.8277ex29359090243-({[(4-methylphenyl)sulfonyl]carbamoyl}amino)phenyl 4-methylbenzenesulfonate (CAS RN 232938-43-1) with a purity by weight of 99 % or more0 %—31.12.2026
0.8467ex29359090265-(2-Fluorophenyl)-1-(pyridin-3-ylsulfonyl)-1H-pyrrole-3-carbaldehyde (CAS RN 881677-11-8) with a purity by weight of 97 % or more0 %—31.12.2027
0.5261ex2935909027Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)0 %—31.12.2026
0.8350ex2935909029Vemurafenib (INN) (CAS RN 918504-65-1) with a purity by weight of 98 % or more0 %—31.12.2027
0.7183ex29359090306-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)0 %—31.12.2026
0.8413ex29359090315-(N-3-methylphenyl-sulfonylamido)-(N′,N′′-bis-(3-methylphenyl)-isophthalicacid-diamide) (CAS RN 2375645-78-4) with a purity by weight of 95 % or more0 %—31.12.2027
0.8693ex29359090324-Chloro-3-nitro-5-sulphamoylbenzoic acid (CAS RN 22892-96-2) with a purity by weight of 96 % or more0 %—31.12.2029
0.7677ex29359090334-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3)0 %—31.12.2029
0.7572ex29359090371,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2)0 %—31.12.2029
0.7438ex2935909040Venetoclax (INN) (CAS 1257044-40-8)0 %—31.12.2027
0.8606ex2935909041Lenacapavir sodium (INNM) (CAS RN 2283356-12-5) with a purity by weight of 98 % or more0 %—31.12.2028
0.5036ex2935909042Penoxsulam (ISO) (CAS RN 219714-96-2)0 %—31.12.2025
0.7928ex29359090444-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more0 %—31.12.2025
0.3562ex2935909045Rimsulfuron (ISO) (CAS RN 122931-48-0)0 %—31.12.2029
0.5451ex2935909048(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)0 %—31.12.2026
0.2843ex29359090504,4′-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)0 %—31.12.2029
0.4636ex29359090532,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)0 %—31.12.2029
0.6777ex2935909054Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more0 %—31.12.2025
0.3560ex2935909055Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)0 %—31.12.2029
0.6802ex2935909056N-(p-Toluenesulphonyl)-N′-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)0 %—31.12.2025
0.6903ex2935909057N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)0 %—31.12.2025
0.6664ex2935909059Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more0 %—31.12.2025
0.4586ex2935909063Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more0 %—31.12.2029
0.3561ex2935909065Tribenuron-methyl (ISO) (CAS RN 101200-48-0)0 %—31.12.2029
0.7854ex2935909070(4S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more0 %—31.12.2029
0.8055ex29359090804-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more0 %—31.12.2025
0.3704ex2935909088N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)0 %—31.12.2029
0.4048ex29359090893-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)0 %—31.12.2026
0.4944ex2938903010Ammonium glycyrrhizate (CAS RN 53956-04-0)0 %—31.12.2025
0.3554ex2938909010Hesperidin (CAS RN 520-26-3)0 %—31.12.2029
0.5927ex2938909020Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)0 %—31.12.2029
0.7329ex2938909030Rebaudioside A (CAS RN 58543-16-1)0 %—31.12.2027
0.7047ex2940000030D(+)- Trehalose dihydrate (CAS RN 6138-23-4)0 %—31.12.2026
0.8424ex2940000060Methyl α-D-mannopyranoside (CAS RN 617-04-9) with a purity by weight of 98 % or more0 %—31.12.2027
0.8635ex2940000070Alpha-D-Mannopyranose, 6-acetate 2,3,4-tribenzoate 1-(2,2,2-trichloroethanimidate) (CAS RN 346441-49-4) with a purity by weight of 95 % or more0 %—31.12.2028
0.5233ex2941203010Dihydrostreptomycin sulphate (CAS RN 5490-27-7)0 %—31.12.2026
0.6984ex2942000010Sodium triacetoxyborohydride (CAS RN 56553-60-7)0 %—31.12.2026
0.8614ex2942000020Dimethylamine—borane (1:1) (CAS RN 74-94-2) with a purity by weight of 98 % or more0 %—31.12.2028
0.355532012000Wattle extract0 %—31.12.2029
0.7943ex3201902010Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less0 %—31.12.2025
0.3553ex3201909020Tanning extracts derived from gambier and myrobalan fruits0 %—31.12.2029
0.6183ex3204110015Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight0 %—31.12.2029
0.6277ex3204110025N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)0 %—31.12.2029
0.5134ex3204110045Preparation of dispersion dyes, containing:C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)0 %—31.12.2025
0.5264ex3204110050Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight0 %—31.12.2027
0.6972ex3204120015Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight0 %—31.12.2026
0.6975ex3204120017Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight0 %—31.12.2026
0.7021ex3204120025Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight0 %—31.12.2026
0.6976ex3204120027Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight0 %—31.12.2026
0.6963ex3204120035Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight0 %—31.12.2026
0.6964ex3204120037Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight0 %—31.12.2026
0.5925ex3204120040Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)0 %—31.12.2029
0.6965ex3204120045Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight0 %—31.12.2026
0.6971ex3204120047Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight0 %—31.12.2026
0.6973ex3204120055Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight0 %—31.12.2026
0.6974ex3204120057Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight0 %—31.12.2026
0.6535ex3204120060Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight0 %—31.12.2029
0.6977ex3204120065Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight0 %—31.12.2026
0.6652ex3204120070Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight0 %—31.12.2025
0.4065ex3204130010Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight0 %—31.12.2029
0.7394ex3204130015Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight0 %—31.12.2027
0.7396ex3204130035Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 50 % or more by weight0 %—31.12.2027
0.5805ex3204130040Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight0 %—31.12.2027
0.6475ex3204130060Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight0 %—31.12.2029
0.6569ex3204140010Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight0 %—31.12.2025
0.6571ex3204140030C.I. Colourant Direct Red 23 (CAS RN 3441-14-3) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight0 %—31.12.2029
0.8537ex3204150015Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight0 %—31.12.2028
0.6129ex3204150070Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)0 %—31.12.2029
0.6325ex3204160030Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:Colourant Reactive Yellow 201 (CAS RN 27624-67-5),1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)0 %—31.12.2029
0.7367ex3204160040Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0)with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, andcontaining a preservative0 %—31.12.2027
0.2517ex3204170010Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight0 %—31.12.2029
0.5433ex3204170015Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight0 %—31.12.2026
0.7092ex3204170018Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight0 %—31.12.2026
0.6130ex3204170019Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight0 %—31.12.2029
0.5505ex3204170020Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight0 %—31.12.2026
0.6279ex3204170021Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight0 %—31.12.2029
0.5259ex3204170022Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight0 %—31.12.2026
0.6246ex3204170023Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)0 %—31.12.2029
0.6453ex3204170024Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight0 %—31.12.2029
0.5427ex3204170025Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight0 %—31.12.2026
0.7261ex3204170026Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight0 %—31.12.2027
0.8678ex3204170028Colourant C.I. Pigment Yellow 12 (CAS RN 6358–85-6) and preparations based thereon with a colourant C.I. Pigment Yellow 12 content of 21 % or more by weight0 %—31.12.2028
0.7659ex3204170031Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight0 %—31.12.2029
0.6603ex3204170033Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight0 %—31.12.2025
0.5426ex3204170035Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight0 %—31.12.2026
0.7565ex3204170037Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight0 %—31.12.2029
0.6452ex3204170048Preparation, in the form of extruded beads, containing by weight:60 % or more but not more than 70 % of Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4),30 % or more, but not more than 40 % disproportionated rosin (CAS RN 8050-09-7),whether or not containing kaolin0 %—31.12.2025
0.5832ex3204170075Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight0 %—31.12.2027
0.5700ex3204170085Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight0 %—31.12.2027
0.5680ex3204170088Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight0 %—31.12.2027
0.6979ex3204190013Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight0 %—31.12.2026
0.5100ex3204190073Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight0 %—31.12.2026
0.5282ex3204190077Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight0 %—31.12.2026
0.4058ex3204200010Colourant C.I. Fluorescent Brightener 184 (CAS RN 7128-64-5) and preparations based thereon with a colourant C.I. Fluorescent Brightener 184 content of 20 % or more by weight0 %—31.12.2026
0.5395ex3204200030Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight0 %—31.12.2026
0.6473ex3204900010Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight0 %—31.12.2029
0.7658ex3205000020Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2)65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)0 %—31.12.2029
0.7699ex3205000030Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1)65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)0 %—31.12.2029
0.3550ex3206110010Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate0 %—31.12.2029
0.5378ex3206190010Preparation containing by weight:72 % (± 2 %) of mica (CAS RN 12001-26-2), and28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)0 %—31.12.2026
0.8770ex3206200050Nickel iron chromite black spinel (C.I. pigment black 30) (CAS RN 71631-15-7)0 %—31.12.2029
0.8765ex3206200060Cobalt chromite green spinel (C.I. pigment green 26) (CAS RN 68187-49-5)0 %—31.12.2029
0.8768ex3206200070Copper chromite black spinel (C.I. pigment black 28) (CAS RN 68186-91-4)0 %—31.12.2029
0.6245ex3206497020Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)0 %—31.12.2029
0.7390ex3206497040Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight0 %—31.12.2027
0.8211ex3206497050Concentrated mixture of pigments (masterbatch) in the form of pellets containing by weight:50 % or more but not more than 70 % of polyamide-6.6 (CAS RN 32131-17-2),15 % or more but not more than 20 % of iron powder (CAS RN 7439-89-6),5 % or more but not more than 15 % of barium sulphate (CAS RN 7727-43-7), and5 % or more but not more than 10 % of blue pigment, consisting of a mixture of Titanium dioxide (CAS RN 13463-67-7) and Copper(II) phtalocyanine(CAS RN 147-14-8)0 %—31.12.2026
0.367332065000Inorganic products of a kind used as luminophores0 %—31.12.2029
0.8676ex3207300030Silver paste, containing by weight:45 % or more, but not more than 90 % silver (CAS RN 7440-22-4) and59 % or more, but not more than 92 % of the total solids (including silver)for use as conductor in the production of solar cells0 %—31.12.2028
0.8630ex3207300040Aluminium paste, containing by weight:72 % or more but not more than 82 % aluminium (CAS RN 7429-90-5)with a viscosity of 10 or more, but not more than 100 Pa.s (Brookfield RVT, 14 Spindle, 20 rpm, 25 oC±0,5 oC)with an aluminium particle size of not more than 25 μmfor use in the production of solar cells0 %—31.12.2028
0.2511ex3208201010Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer0 %—31.12.2029
0.4511ex3208201020Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether0 %—31.12.2029
0.8412ex32082010ex390591005025Copolymer of vinylcaprolactam and vinylpyrrolidone (CAS RN 51987-20-3) in the form of a solution in 2-butoxyethanol (CAS RN 111-76-2) containing by weight 45 % or more but not more than 58 % of copolymer0 %—31.12.2027
0.8137ex32089019ex391190991363Mixture, containing by weight:20 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),7 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),40 % or more, but not more than 65 % of ethanol (CAS RN 64-17-5),1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)0 %—31.12.2025
0.3967ex3208901915Chlorinated polyolefins, in a solution0 %—31.12.2029
0.2504ex3208901940Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane0 %—31.12.2029
0.6154ex32089019ex382499924563Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate0 %—31.12.2029
0.6989ex3208901947Solution containing by weight:0.1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)0 %—31.12.2026
0.2502ex3208901950Solution containing by weight:(63,5 ±10) % of gamma-butyrolactone (CAS RN 96-48-0),(30 ± 10) % of aromatic polyhydroxyamide resin,(3,5 ±1,5) % of naphthoquinone ester derivative,(1,5 ±0,5) % of arylsilicic acid,(1,5 ±0,5) % of [3-(trimethoxysilyl)propyl]urea (CAS RN 23843-64-3)0 %—31.12.2026
0.6726ex3208901955Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent0 %—31.12.2026
0.4037ex3208901960Copolymer of hydroxystyrene with one or more of the following:styrenealkoxystyrenealkylacrylatesdissolved in ethyl lactate0 %—31.12.2026
0.6005ex3208901965Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants0 %—31.12.2029
0.5777ex3215190020Ink:consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),with a total solid content by weight of 55 % or more, but not more than 57 %, andwith a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,for use in the manufacture of electrodes0 %l31.12.2027
0.2501ex3215907020Heat sensitive ink fixed on a plastic film0 %—31.12.2029
0.4533ex3215907030Disposable cartridge ink, containing by weight:1 % or more, but not more than 10 % of amorphous silicon dioxide or3,8 % or more of dye C.I. Solvent Black 7 in organic solventsfor use in the marking of integrated circuits0 %—31.12.2029
0.5031ex3215907040Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:waxa vinyl-based polymer anda colouring agentfor use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices0 %—31.12.2025
0.366133011210Essential oil of orange, not deterpenated0 %—31.12.2029
0.4863ex3402399010Sodium lauroyl methyl isethionate0 %—31.12.2026
0.4002ex3402420010Vinyl copolymer surface active agent based on polypropylene glycol0 %—31.12.2029
0.4277ex3402420020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %—31.12.2027
0.6285ex3402901010Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides (CAS RN 63393-96-4)0 %—31.12.2029
0.8758ex3402901015Silicone surfactant consisting of a mixture of:60 % or more but not more than 85 % by weight of Polyalkyleneoxidedimethylsiloxane copolymer (CAS RN 68937-55-3),15 % or more but not more than 40 % by weight of poly(oxy-1,2-ethanediyl),α-hydro-ω-hydroxy-Ethane-1,2-diol, ethoxylated (CAS RN 25322-68-3),0,8 % or more but not more than 1,5 % by weight Octamethylcyclotetrasiloxane (CAS RN 556-67-2),0,6 % or more but not more than 1,0 % by weight Decamethylcyclopentasiloxane (CAS RN 541-02-6),0,2 % or more but not more than 0,5 % by weight Dodecamethylcyclohexasiloxane (CAS RN 540-97-6)0 %—31.12.2029
0.3660ex3402901020Mixture of docusate sodium (INN) and sodium benzoate0 %—31.12.2029
0.4313ex3506919040Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)0 %—31.12.2029
0.6293ex3507909010Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products0 %—31.12.2029
0.7050ex3507909030Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution withan enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml,a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 % anda pH value of 6,5 or more, but not more than 8,50 %—31.12.2026
0.4922ex3601000020Pyrotechnical mixture in cylindrical shape or granulate form, composed of strontium nitrate or copper nitrate or basic copper nitrate in a matrix of nitroguanidine or guanidine nitrate, also containing a binder and additives, used as a component of airbag inflators0 %—31.12.2026
0.7318ex3603500010Igniters for gas generators with:an overall maximum length of 15,5 mm or more but not more than 29,4 mm, anda pin length of 6,4 mm or more but not more than 12,6 mm0 %—31.12.2028
0.5465ex3801900010Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)0 %—31.12.2026
0.6759ex3802100010Mixture of activated carbon and polyethylene, in form of powder0 %—31.12.2025
0.7368ex3802100040Chemically activated carbon for the absorption and desorption of vapors, in a defined or irregular shape with an effective butane capacity of 5 g butane / 100 ml or more (according to ASTM D 5228)0 %—31.12.2027
0.298738059010Pine oil1,7 %—31.12.2029
0.2988ex3808919030Preparation containing endospores or spores and protein crystals derived from either:Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,Bacillus thuringiensis subsp. kurstaki or,Bacillus thuringiensis subsp. israelensis or,Bacillus thuringiensis subsp. aizawai or,Bacillus thuringiensis subsp. tenebrionis0 %—31.12.2029
0.2983ex3808919040Spinosad (ISO)0 %—31.12.2029
0.5710ex3808919060Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L)0 %—31.12.2027
0.4753ex3808939010Preparation, in the form of granules, containing by weight:38,8 % or more but not more than 41,2 % of Gibberellin A3, or9,5 % or more but not more than 10,5 % of Gibberellin A4 and A70 %—31.12.2029
0.5048ex3808939020Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amineof a kind used in plant growth regulators0 %—31.12.2025
0.8727ex3808939070Preparation in the form of powder, containing by weight 90 % or more of gibberellin A4 and gibberellin A7 combined (CAS RN 8030-53-3)0 %—31.12.2029
0.6532ex3808942030Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)0 %—31.12.2029
0.4510ex3811190010Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:4,9 % of 1,2,4-trimethyl-benzene,4,9 % of naphthalene, and0,5 % of 1,3,5-trimethyl-benzene0 %—31.12.2029
0.3448ex3811210010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0 %—31.12.2029
0.7223ex3811210011Dispersing agent and oxidation inhibitor containing:o-amino polyisobutylenephenol (CAS RN 78330-13-9),more than 30 % by weight but not more than 50 % by weight of mineral oils,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2029
0.6904ex3811210012Dispersing agent containing:esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),35 % or more but not more than 55 % by weight of mineral oils, andwith a chlorine content of not more than 0,05 % by weight,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2025
0.6018ex3811210013Additives containing:borated magnesium (C16-C24) alkylbenzene sulphonates andmineral oils,having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils0 %—31.12.2027
0.6906ex3811210014Dispersing agent:containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),containing 35 % or more but not more than 55 % by weight of mineral oils,with a chlorine content by weight of not more than 0,05 %,having a total base number of less than 15,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2025
0.6907ex3811210016Detergent containing:Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)40 % or more but not more than 60 % by weight of mineral oils andhaving a total base number more than 120used in the manufacture of blends of additives for lubricating oils0 %—31.12.2025
0.6905ex3811210018Detergent containing:long chain alkyltoluene calcium sulphonates,more than 30 % but not more than 50 % by weight of mineral oils, andhaving a total base number of more than 310 but not more than 340,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2025
0.6430ex3811210019Additives containing:a polyisobutylene succinimide based mixture, andmore than 30 % but not more than 50 % by weight of mineral oils,having a total base number of more than 40, for use in the manufacture of lubricating oils0 %—31.12.2029
0.3449ex3811210020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil0 %—31.12.2029
0.8583ex3811210021Additive containing by weight:90 % or more but not more than 97 % of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (CAS RN 160305-95-3),3 % or more but not more than 10 % of mineral oil,for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2028
0.8196ex3811210022Additive consisting essentially of:Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8),25 % or more by weight, but not more than 40 % by weight of mineral oil,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2026
0.8197ex3811210024Additive consisting essentially of:Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20,45 % and more by weight and no more than 55 % by weight of mineral oil,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2026
0.6012ex3811210025Additives containing:a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10000 but not more than 20000, andmore than 15 %, but not more than 30 % by weight of mineral oils,for use in the manufacture of lubricating oils0 %—31.12.2029
0.8198ex3811210026Additive consisting essentially of:Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8),7 % or more by weight but not more than 12 % by weight of mineral oil,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2026
0.6022ex3811210027Additives containing:10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, andmineral oils,for use in the manufacture of lubricating oils0 %—31.12.2029
0.8199ex3811210028Additive consisting essentially of:Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8);triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight,O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds10 % or more by weight but not more than 20 % by weight of mineral oils,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2026
0.5727ex3811210029Additive containing by weight:25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),30 % or more but not more than 65 % of mineral oils,for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2027
0.5717ex3811210030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2027
0.8201ex3811210032Additive consisting essentially of:Zinc O,O,O′,O′-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2),4 % or more by weight but not more than 12 % by weight of mineral oil,used in the manufacture of blends of additives for lubricating oils0 %—31.12.2026
0.6013ex3811210033Additives containing:calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), andmineral oils,having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils0 %—31.12.2029
0.6016ex3811210037Additives containing:a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, andmore than 50 % but not more than 75 % by weight of mineral oils,for use in the manufacture of lubricating oils0 %—31.12.2029
0.6435ex3811210048Additives containing:overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) andby weight more than 25 % but not more than 50 % of mineral oils,having a total base number of more than 350, but not more than 450,for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2029
0.6437ex3811210053Additives containing:overbased calcium petroleum sulphonates (CAS RN 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 420,for use in the manufacture of lubricating oils0 %—31.12.2029
0.6434ex3811210055Additives containing:low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils0 %—31.12.2029
0.5724ex3811210060Additives for lubricating oils, containing mineral oils,based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,with a total base number (TBN) of 280 or more but not more than 320,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2027
0.6431ex3811210063Additives containing:an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % andby weight more than 40 % but not more than 60 % of mineral oils,having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils0 %—31.12.2029
0.6429ex3811210065Additives containing:a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), andmore than 35 % but not more than 50 % by weight of mineral oils,having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils0 %—31.12.2029
0.5711ex3811210070Additives for lubricating oils,containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),containing mineral oils,with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,with a total base number (TBN) of more than 20,used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2027
0.6017ex3811210073Additives containing:borated succinimide compounds (CAS RN 134758-95-5),mineral oils, andhaving a total base number (TBN) greater than 40,for use in the manufacture of additive mixtures for lubricating oils0 %—31.12.2029
0.6671ex3811210075Additives containing:Calcium (C10-C14) dialkylbenzenesulfonates,more than 40 %, but not more than 60 % by weight of mineral oils,with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils0 %—31.12.2027
0.6669ex3811210077Antifoam additives consisting of:a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, andmore than 50 % but not more than 80 % by weight of mineral oils,for use in the manufacture of additive blends for lubricating oils0 %—31.12.2027
0.6666ex3811210080Additives containing:polyisobutylene aromatic polyamine succinimide,more than 40 % but not more than 60 % by weight of mineral oils,with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils0 %—31.12.2027
0.6498ex3811210083Additives containing:polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),more than 31,9 % but not more than 43,3 % by weight of mineral oils,not more than 0,05 % by weight chlorine, andhaving a total base number (TBN) greater than 20,for use in the manufacture of additives blends for lubricating oils0 %—31.12.2029
0.5718ex3811210085Additives:containing more than 20 % but not more than 45 % by weight of mineral oils,based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,for use in the manufacture of blends of additives0 %—31.12.2027
0.5721ex3811290020Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2027
0.8655ex3811290023Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0)0 %—31.12.2028
0.6432ex3811290025Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils or greases0 %—31.12.2029
0.5723ex3811290030Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %—31.12.2027
0.5719ex3811290033Additives for lubricating oils, consisting of a mixture of N,N-dialkyl - 2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used in the manufacture of blends of additives for lubricating oils0 %—31.12.2027
0.6433ex3811290035Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils0 %—31.12.2029
0.5728ex3811290040Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils0 %—31.12.2027
0.6436ex3811290045Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils0 %—31.12.2029
0.6020ex3811290070Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils0 %—31.12.2029
0.7205ex3811290075Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils0 %—31.12.2029
0.6023ex3811290085Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils0 %—31.12.2029
0.5565ex3811900040Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol0 %—31.12.2027
0.7204ex3811900050Corrosion inhibitor containing:polyisobutenyl succinic acid andmore than 5 % and not more than 20 % by weight of mineral oilsfor use in the manufacture of blends of additives for fuels0 %—31.12.2026
0.5147ex3812100010Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)0 %—31.12.2026
0.6045ex3812209010Plasticiser, containing:bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)0 %—31.12.2029
0.3444ex3812399020Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate0 %—31.12.2029
0.6055ex3812399025UV photo stabiliser containing:α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), andmethyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)0 %—31.12.2029
0.6054ex3812399035Mixture containing by weight:25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)not more than 20 % of other organic compoundson a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)0 %—31.12.2029
0.4861ex3812399040Mixture of:80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), and20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3)0 %—31.12.2029
0.8273ex38123990452-Aminoethanol reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191743-75-6) with a purity by weight of 99 % or more0 %—31.12.2026
0.5477ex3812399055UV-stabilizer, containing:2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) andeither N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) orN,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)0 %—31.12.2026
0.5483ex3812399065Stabiliser for plastic material containing:2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)0 %—31.12.2026
0.8533ex3812399075UV stabilizer containing a mixture of:branched and linear C7 to C9 alkyl esters of [3-(2H-benzotriazol-2-yl)-5-(1,1- dimethylethyl)-4-hydroxy]-1- phenylpropanoic acid (CAS RN 127519-17-9) in an amount of 95 % by weight or more, and2-methoxy-1-methylethyl acetate (CAS RN 108-65-6) in an amount of not more than 5 % by weight0 %—31.12.2028
0.5822ex3812399080UV-stabilizer, consisting of:a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) andeither an o-hydroxyphenyl triazine UV light absorber ora chemically modified phenolic compound0 %—31.12.2027
0.8366ex3812399085Light stabilizer, reaction product of stearic acid methyl ester with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS RN 300711-92-6) with a purity of less than 90 % by weight0 %—31.12.2027
0.3731ex3814009040Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether0 %—31.12.2029
0.2800ex3815120010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver0 %—31.12.2029
0.5508ex3815199010Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)0 %—31.12.2026
0.3435ex3815199030Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene0 %—31.12.2029
0.8745ex3815199055Components for a catalyst system, imported as single components or as set, made up of at least one of the following preparations:ceramic material (CAS RN 66402-68-4),molybdenum oxide and nickel oxide supported on aluminium oxide,molybdenum oxide, nickel oxide and aluminium phosphate supported on aluminium oxide,molybdenum oxide, nickel oxide, aluminium phosphate, silica, and molybdenum supported on aluminium oxide,for use against organic and inorganic impurities in kerosene production0 %—31.12.2029
0.2791ex3815199070Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide0 %—31.12.2029
0.2790ex3815199075Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide0 %—31.12.2029
0.2793ex3815199080Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil0 %—31.12.2029
0.2788ex3815199085Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder0 %—31.12.2029
0.3899ex3815199086Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins0 %—31.12.2029
0.4005ex3815909016Initiator based on dimethylaminopropyl urea0 %—31.12.2027
0.5062ex3815909030Catalyst, consisting of a suspension in mineral oil of:tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, andsilicon dioxide,containing 6,6 % (±0,6 %) by weight of magnesium, andcontaining 2,3 % (±0,2 %) by weight of titanium0 %—31.12.2025
0.7998ex3815909038Photoinitiator, containing by weight:80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate0 %—31.12.2025
0.7243ex3815909043Catalyst in powder form consisting by weight of92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7),5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and2,5 % (±1,5) % sulphur trioxide (CAS RN 7446-11-9)0 %—31.12.2027
0.7999ex3815909048Photoinitiator containing by weight:88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)0 %—31.12.2025
0.3433ex3815909050Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium0 %—31.12.2029
0.2783ex3815909080Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol0 %—31.12.2025
0.3430ex3815909081Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate (CAS RN 62314-22-1)0 %—31.12.2029
0.2782ex3815909085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins0 %—31.12.2027
0.3732ex3815909088Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:4 % or more but not more than 10 % of titanium, and10 % or more but not more than 20 % magnesium0 %—31.12.2029
0.3733ex3815909089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile0 %—31.12.2026
0.4408ex3817005010Mixture of alkylbenzenes (C14-26) containing by weight:35 % or more but not more than 60 % of eicosylbenzene,25 % or more but not more than 50 % of docosylbenzene,5 % or more but not more than 25 % of tetracosylbenzene0 %—31.12.2025
0.3427ex3817008010Mixture of alkylnaphthalenes, containing by weight:88 % or more but not more than 98 % of hexadecylnaphthalene2 % or more but not more than 12 % of dihexadecylnaphthalene0 %—31.12.2029
0.4581ex3817008020Mixture of branched alkyl benzenes mainly containing dodecyl benzenes0 %—31.12.2029
0.5479ex3817008030Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms0 %—31.12.2026
0.6038ex38231930ex382319302030Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 23090 %—31.12.2027
0.6037ex38231990ex382319902030Palm acid oils from refining for use in the manufacture of:industrial monocarboxylic fatty acids of heading 3823,stearic acid of heading 3823,stearic acid of heading 2915,palmitic acid of heading 2915, oranimal feed preparations of heading 23090 %—31.12.2027
0.8365ex3824999222Solution containing:30 % or more but not more than 40 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3), and60 % or more but not more than 70 % by weight of ethyl methyl carbonate (CAS RN 623-53-0), or dimethyl carbonate (CAS RN 616-38-6)3,2 %—31.12.2025
0.6810ex3824999223Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol0 %—31.12.2025
0.4909ex3824999229Preparation containing by weight:85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate0 %—31.12.2025
0.4707ex3824999232Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)0 %—31.12.2029
0.3083ex38249992ex38249993ex38249996334040Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:on a support of mineral wax, whether or not modified chemically, orin the form of a solution in an organic solvent0 %—31.12.2029
0.4523ex3824999237Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4)0 %—31.12.2029
0.6779ex3824999240Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent0 %—31.12.2025
0.7724ex3824999243Preparation containing by weight:65 % or more, but not more than 95 % of isopropylated triaryl phosphate (CAS RN 68937-41-7) and5 % or more, but not more than 35 % of triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2029
0.8706ex3824999244Mixture, containing by weight:90 % or more but not more than 95 % of cresol ethoxylate (CAS RN 37281-57-5), and5 % or more but not more than 10 % of xylenol ethoxylate (CAS RN 61723-82-8)0 %—31.12.2029
0.4279ex3824999249Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)0 %—31.12.2027
0.3065ex3824999251Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid0 %—31.12.2029
0.7742ex3824999252Electrolyte containing:5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),for use in the manufacture of motor vehicle batteries3,2 %—31.12.2025
0.4434ex3824999254Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)0 %—31.12.2026
0.6025ex3824999255Additives for paints and coatings, containing:a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and30 % or more but not more than 35 % by weight of isobutyl alcohol0 %—31.12.2028
0.5050ex38249992613′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine0 %—31.12.2025
0.7831ex3824999262Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane0 %—31.12.2029
0.6720ex3824999268Preparation containing by weight:20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)Dissolved in:10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)64 %(±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and6 % (± 1.0 %) Naphthalene (CAS RN 91-20-3)0 %—31.12.2025
0.6719ex3824999269Preparation containing by weight:80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) andnot more than 1 % triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2026
0.4409ex3824999270Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine0 %—31.12.2029
0.8644ex3824999271Mixture containing by weight:49 % or more but not more than 51 % of ethylene carbonate (CAS RN 96-49-1), and49 % or more but not more than 51 % of 1,3-propanesultone (CAS RN 1120-71-4)3,2 %—31.12.2025
0.8471ex3824999273Tri-C8-10-alkyl amines (CAS RN 68814-95-9) with a purity by weight of 95 % or more0 %—31.12.2027
0.8463ex3824999274Reaction mass containing by weight:22,4 % or more, but not more than 26,4 % of 3-methylphenyl diphenyl phosphate (CAS RN 69500 28 3);17,3 % or more, but not more than 21,3 % of 4-methylphenyl diphenyl phosphate (CAS RN 78-31-9);5 % or more, but not more than 9 % of bis(3-methylphenyl) phenyl phosphate (CAS RN 34909-68-7);8,9 % or more, but not more than 12,9 % of 3-methylphenyl 4-methylphenyl phenyl phosphate (CAS RN 222165-66-4);26,9 % or more, but not more than 30,9 % of triphenyl phosphate (CAS RN 115-86-6)0 %—31.12.2027
0.8486ex3824999275Mixture, containing by weight:75 % or more of tetrabutyltin (CAS RN 1461-25-2),not more than 20 % of tributyltin chloride (CAS RN 1461-22-9),not more than 4 % of dibutyltin dichloride (CAS RN 683-18-1),for use in the production of butyltin compounds, used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry3,2 %—31.12.2027
0.8506ex3824999279Mixture, containing by weight:tributyltin chloride (CAS RN 1461-22-9) with a purity by weight of 80 % or more,not more than 5 % tetrabutyltin (CAS RN 1461-25-2),not more than 6 % dibutyltin dichloride (CAS RN 683-18-1),not more than 11 % o-xylene (CAS RN 95-47-6),for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry3,2 %—31.12.2027
0.7462ex3824999281Reaction mass of 3- [(diphenoxyphosphoryl)oxy]phenyl triphenyl 1,3-phenylene bis(phosphate) and tetraphenyl 1,3-phenylene bis(phosphate)0 %—31.12.2028
0.6546ex3824999282T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene0 %—31.12.2029
0.8517ex38249992831-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of 70 % or more, but not more than 90 %0 %—31.12.2029
0.3074ex3824999284Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:either an aluminium-alkyl compound,or an organic complex of tungstenor an organic complex of molybdenum0 %—31.12.2029
0.8499ex3824999286Tall oil N,N-dimethyl fatty amides (CAS RN 68308-74-7) with a purity by weight of 99 % or more0 %—31.12.2027
0.3069ex38249992882,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)0 %—31.12.2025
0.8083ex3824999292Solution consisting of:50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)0 %—31.12.2025
0.8278ex3824999294({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (CAS RN 895525-72-1) with a content of at least 45 % by weight dissolved in N,N-dimethylacetamide (CAS RN 127-19-5)0 %—31.12.2026
0.8287ex3824999295Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (CAS RN 203313-47-7) in N,N-dimethylacetamide (CAS RN 127-19-5), containing by weight 25 % or more but not more than 45 % of the carboxylate0 %—31.12.2026
0.5961ex3824999330Powder Mixture containing by weight:85 % or more of zinc diacrylate (CAS RN 14643-87-9),not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), andnot more than 10 % of zinc stearate (CAS RN 557-05-1)0 %—31.12.2029
0.8714ex3824999331Reaction mass of dihexadecyl hydrogen phosphate (CAS RN 2197-63-9) and hexadecyl dihydrogen phosphate (CAS RN 3539-43-3)0 %—31.12.2029
0.8498ex3824999333Preparation containing by weight60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1),30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1),1 % or more but not more than 5 % of CI Pigment Blue 29 (CAS RN 57455-37-5) and1 % or more but not more than 5 % of CI Pigment Violet 15 (CAS RN 12769-96-9)0 %—31.12.2027
0.4719ex3824999335Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)0 %—31.12.2029
0.8497ex3824999336Preparation containing by weight 60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1) and 30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1)0 %—31.12.2027
0.4527ex3824999342Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea0 %—31.12.2029
0.7153ex3824999345Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:not more than 20 % of disodium sulphate, andnot more than 10 % of sodium chloride0 %—31.12.2026
0.7786ex3824999348Nonhalogenated flame retardant containing by weight:50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034-17-1),35 % or more, but not more than 45 % of a phosphoric acid derivative, andnot more than 6 % of zinc oxide (CAS RN 1314-13-2)0 %—31.12.2029
0.8062ex3824999351Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more0 %—31.12.2025
0.6215ex3824999353Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder0 %—31.12.2029
0.2939ex3824999361Disodium 7,7′-(carbonyldiimino)bis(4-hydroxynaphthalene-2-sulphonate) (CAS RN 20324-87-2) with a purity by weight of 80 % or more0 %—31.12.2028
0.4290ex3824999363Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters0 %—31.12.2027
0.7460ex3824999365Reaction mass of 1,1′-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene0 %—31.12.2029
0.8371ex38249993741,3-Propanediamine, N1,N1′-1,2-ethanediylbis-, reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191680-81-6)0 %—31.12.2027
0.4336ex3824999388Mixture of phytosterols containing by weight:60 % or more, but not more than 80 % of sitosterols,less than 15 % of campesterols,less than 5 % of stigmasterols, andless than 15 % of betasitostanols0 %—31.12.2027
0.3078ex3824999635Calcined bauxite (refractory grade)0 %—31.12.2029
0.8514ex38249996432-(Ethylthio)ethanethiol functionalized silicagel with a purity by weight of 98 % or more0 %—31.12.2027
0.6628ex3824999646Manganese zinc ferrite granulate, containing by weight:52 % or more but not more than 76 % of iron(III)oxide,13 % or more but not more than 42 % of manganese oxide, and2 % or more but not more than 22 % of zinc oxide0 %—31.12.2025
0.6749ex3824999648Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %0 %—31.12.2025
0.5607ex3824999650Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators0 %—31.12.2027
0.6145ex3824999655Carrier in powder form, consisting of:ferrite (Iron oxide) (CAS RN 1309-37-1)manganese oxide (CAS RN 1344-43-0)magnesium oxide (CAS RN 1309-48-4)styrene acrylate copolymerto be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers0 %—31.12.2029
0.5141ex3824999660Fused magnesia containing by weight 15 % or more of dichromium trioxide0 %—31.12.2026
0.8587ex3824999662Viscous preparation essentially containing:by weight more than 5 % but not more than 15 % of poly(vinyl alcohol) (CAS RN 9002-89-5),by weight more than 10 % but not more than 20 % of 1-methoxy-2-propanol (CAS RN 107-98-2),water,for use as a protective coating for wafers during the slicing process in the manufacture of semiconductors0 %—31.12.2028
0.3050ex3824999665Aluminium sodium silicate, in the form of spheres of a diameter of:either 1,6mm or more but not more than 3,4 mm,or 4mm or more but not more than 6 mm0 %—31.12.2029
0.3119ex3824999673Reaction product, containing by weight:1 % or more but not more than 40 % of molybdenum oxide,10 % or more but not more than 50 % of nickel oxide,30 % or more but not more than 70 % of tungsten oxide0 %—31.12.2029
0.7010ex3824999674Mixture with a non-stoichiometric composition:with a crystalline structure,with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm0 %—31.12.2026
0.7147ex3824999680Mixture consisting of:64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) andnot more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)0 %—31.12.2026
0.5820ex3824999687Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:0,1 % or more but not more than 1 % of platinum, and0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)0 %—31.12.2027
0.5939ex38260010ex382600102029Mixture of fatty acid methyl esters containing by weight at least:65 % or more but not more than 75 % of C12 FAME,21 % or more but not more than 28 % of C14 FAME,4 % or more but not more than 8 % of C16 FAME,for use in the manufacture of detergents and home and personal care products0 %—31.12.2029
0.5941ex38260010ex382600105059Mixture of fatty acid methyl esters containing by weight at least:50 % or more but not more than 58 % of C8-FAME35 % or more but not more than 50 % of C10-FAMEfor the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid0 %—31.12.2029
0.6132ex39011010ex390140002010High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, witha melt flow rate (MFR 190 oC/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min anda density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 anda vicat softening temperature of min. 94 oC0 %m331.12.2029
0.8378ex39011010ex390140005050Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with:a density (ASTM D 1505) of 0,924 g/cm3 or more but not more than 0,928 g/cm3,a melt flow rate (190 oC/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, anda peak melting temperature of 120 oC or more but not more than 124 oC0 %—31.12.2027
0.8379ex39011010ex390140006060Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with:a density (ASTM D 1505) of 0,922 g/cm3 or more but not more than 0,926 g/cm3 anda melt flow rate (190 oC/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min0 %—31.12.2029
0.5142ex3901109030Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper0 %—31.12.2026
0.8757ex3901300020Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8)containing by weight 28 % or more but not more than 49 % of vinyl acetate,with a melt flow rate of less than 5 g/10 min (190 oC/2.16 kg, ASTM D1238),in the form of pellets0 %—31.12.2029
0.8732ex3901300030Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5)0 %—31.12.2029
0.6897ex3901400030Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:more than 10 % but not more than 20 % by weight of copolymer,a melt flow rate (MFR 190 oC/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, anda density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,for use in the co-extrusion processing of films for flexible food packaging0 %m331.12.2025
0.6920ex3901908053Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), anda melt flow rate of 10 g/10 min or more (125 oC/2,16 kg, ASTM D1238)0 %m331.12.2025
0.6734ex3901908055Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:an acrylic acid content of 6 % or more but not more than 50 % by weight, anda melt flow rate of 1g/10 min or more at 190 oC/2,16 kg (measured using ASTM D1238)0 %—31.12.2025
0.5049ex3901908067Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more0 %—31.12.2025
0.6998ex3901908073Mixture containing by weight80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)0 %—31.12.2026
0.8739ex3901908075Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets0 %—31.12.2029
0.8736ex3901908085Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets0 %—31.12.2029
0.2902ex3901908091Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid0 %—31.12.2029
0.3906ex3901908092Chlorosulphonated polyethylene0 %—31.12.2029
0.2899ex3901908093Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets0 %—31.12.2029
0.3186ex3901908094Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene0 %—31.12.2029
0.2898ex3901908097Chlorinated polyethylene, in the form of powder0 %—31.12.2029
0.2895ex3902100020Polypropylene, containing no plasticiser,of a melting point of more than 150 oC (as determined by the ASTM D 3417 method),of a heat of fusion of 15 J/g or more but not more than 70 J/g,of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)0 %—31.12.2029
0.3179ex3902200020Hydrogenated polyisobutene, in liquid form0 %—31.12.2029
0.8125ex3902300020Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene0 %—31.12.2025
0.8232ex3902300030Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene0 %—31.12.2026
0.5143ex3902300095A-B-A block copolymer, consisting of:a copolymer of propylene and ethylene and21 % (± 3 %) by weight of polystyrene0 %—31.12.2026
0.5138ex3902300097Liquid ethylene-propylene-copolymer with:a flashpoint of 250 oC or more,a viscosity index of 150 or more,of a number average molecular weight (Mn) of 650 or more0 %—31.12.2026
0.4768ex3902909060Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:liquid at room temperatureobtained by cationic polymerisation of C-5 alkenes monomerswith a number average molecular weight (Mn) of 370 (± 50)with a weight average molecular weight (Mw) of 500 (± 100)0 %—31.12.2029
0.7950ex3902909065Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 390 %—31.12.2025
0.4040ex3902909070Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 o Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without:not more than 40 % by weight of tetradecene and/ornot more than 2 % by weight decene and/ornot more than 2 % by weight of hexadecene0 %—31.12.2026
0.6214ex3902909094Chlorinated polyolefins, whether or not in a solution or dispersion0 %—31.12.2029
0.4166ex3903190040Crystalline polystyrene with:a melting point of 268 oC or more but not more than 272 oCa setting point of 232 oC or more but not more than 247 oC,whether or not containing additives and filling material0 %—31.12.2026
0.5176ex3903909020Copolymer in the form of granules containing by weight:83 ± 3 % styrene,7 ± 2 % n-butyl acrylate,9 ± 2 % n-butyl methacrylate and0,01 % or more but not more than 1 % of polyolefinic wax0 %—31.12.2026
0.2891ex39039090ex391190993543Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 oC0 %—31.12.2029
0.7417ex39039090ex390469803888Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)0 %—31.12.2027
0.8415ex3903909043Mixture of polymers consisting by weight of:10 % or more but not more than 30 % of a styrene-ethylene-butylene-styrene block copolymer (CAS RN 66070-58-4),25 % or more but not more than 45 % of mineral oil (CAS RN 8042-47-5),25 % or more but not more than 45 % of calcium carbonate (CAS RN 1317-65-3),10 % or more but not more than 20 % of polypropylene (CAS RN 9003-07-0), and1 % or more but not more than 3 % of a copolymer of α-methylstyrene and vinyltoluene (CAS RN 9017-27-0)0 %—31.12.2027
0.5473ex39039090ex391190996060Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form0 %—31.12.2026
0.6736ex3903909065Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)0 %—31.12.2025
0.6804ex3903909070Copolymer in the form of granules containing by weight:75 % (± 7 %) styrene and25 % (± 7 %) methylmethacrylate0 %m331.12.2025
0.4410ex3903909086Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene,30 % or more but not more than 45 % of poly(phenylene ether), andnot more than 11 % of additives0 %—31.12.2029
0.2885ex3904610020Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions0 %—31.12.2029
0.7675ex3904698020Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)0 %—31.12.2029
0.7626ex3904698030Copolymer of tetrafluoroethylene, hexafluoropropene and ethene0 %—31.12.2029
0.5560ex3904698085Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers0 %—31.12.2027
0.2883ex3904698096Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 390 %—31.12.2029
0.3745ex3904698097Copolymer of chlorotrifluoroethylene and vinylidene difluoride0 %—31.12.2029
0.8414ex3905910035Aqueous solution of a copolymer of vinylpyrrolidone and N,N-dimethylaminopropyl methacrylamide sulfate (CAS RN 175893-71-7), containing by weight 8 % or more, but not more than 12 % of copolymer0 %—31.12.2027
0.5774ex3905910040Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene0 %—31.12.2027
0.8126ex3905910050Aqueous solution consisting by weight of:10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),not more than 1 % preservatives0 %—31.12.2025
0.8145ex3905910060Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:27 % or more but not more than 33 % of copolymer,not more than 1,5 % of ethanol (CAS RN 64-17-5),not more than 1 % of preservatives0 %—31.12.2025
0.8138ex3905910070Aqueous solution, containing by weight:25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)0 %—31.12.2025
0.8139ex3905910080Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)0 %—31.12.2025
0.3283ex3905999095Hexadecylated or eicosylated polyvinylpyrrolidone0 %—31.12.2029
0.2880ex3905999096Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol0 %—31.12.2029
0.3282ex3905999097Povidone (INN)-iodine (CAS RN 25655-41-8)0 %—31.12.2029
0.3278ex3905999098Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups0 %—31.12.2029
0.327639069060Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide0 %—31.12.2029
0.7347ex3906909023Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm0 %—31.12.2027
0.6672ex3906909033Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm0 %—31.12.2025
0.6663ex3906909037Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm0 %—31.12.2025
0.7125ex3906909043Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)0 %—31.12.2026
0.2886ex3906909050Polymers of esters of acrylic acid with one or more of the following monomers in the chain:chloromethyl vinyl ether,chloroethyl vinyl ether,chloromethylstyrene,vinyl chloroacetate,methacrylic acid,butenedioic acid monobutyl ester,butenedioic acid monocyclohexyl ester,containing by weight not more than 5 % of each monomer unit0 %—31.12.2029
0.8579ex3906909058Mixture of polymers, containing by weight:77 % or more but not more than 81 % of polyacrylamide (CAS RN 9003-05-8),18 % or more but not more than 21 % of polyethylene glycol (CAS RN 25322-68-3)0 %—31.12.2028
0.7499ex3906909060Aqueous dispersion containing by weight:more than 10 % but not more than 15 % of ethanol, andmore than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative0 %—31.12.2029
0.6425ex3906909073Preparation containing by weight:33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer,24 % or more but not more than 28 % of propylene glycol, and37 % or more but not more than 41 % of water0 %—31.12.2029
0.3272ex3907291110Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more0 %—31.12.2029
0.4378ex3907291120Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 400000 %—31.12.2029
0.7532ex3907292035Mixture containing by weight:5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)0 %—31.12.2029
0.4013ex3907292040Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran (CAS RN 38640-26-5) with a number average molecular weight (Mn) of 900 or more but not more than 36000 %—31.12.2028
0.6351ex3907292050Poly(p-phenylene oxide) in the form of powder with:a glass-transition temperature of 210 oC or more,a weight average molecular weight (Mw) of 35000 or more but not more than 80000,an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram0 %—31.12.2029
0.7478ex39072999202,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide0 %—31.12.2029
0.2920ex3907299930Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0 %—31.12.2029
0.3269ex3907299945Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups0 %—31.12.2029
0.4536ex3907299950Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient0 %—31.12.2029
0.4546ex3907299955Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 50000 %—31.12.2029
0.5144ex3907299960Polytetramethylene oxide di-p-aminobenzoate0 %—31.12.2026
0.8491ex3907299970Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) containing by weight not more than 35 % of additives0 %—31.12.2027
0.6839ex3907300015Epoxide resin, halogen-free,containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, andcontaining solvents,for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits0 %—31.12.2025
0.6840ex3907300025Epoxide resincontaining by weight 21 % or more of brome,not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, andcontaining solvents0 %—31.12.2025
0.2759ex3907300040Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504, 8533, 8535, 8536, 8541, 8542 or 85480 %—31.12.2029
0.7427ex3907300070Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), andnone or not more than 0,5 % of carbon black (CAS RN 1333-86-4)0 %—31.12.2027
0.2541ex3907400035α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)0 %—31.12.2029
0.2564ex3907400045α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)0 %—31.12.2029
0.3263ex3907690010Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol0 %—31.12.2029
0.298039077000Poly(lactic acid)0 %—31.12.2029
0.2918ex3907919010Diallyl phthalate prepolymer, in powder form0 %—31.12.2029
0.5639ex3907998025Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol0 %—31.12.2027
0.4940ex39079980ex391390003020Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)0 %—31.12.2025
0.7491ex3907998035Copolymer in form of a clear, pale yellow liquid, consisting ofphthalic acid isomers and/or aliphatic dicarboxylic acids,aliphatic diols, andfatty acid end-capswith:a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH,a viscosity at 25 oC of 2000 cPs or more but not more than 8000 cPs, andan acid value less than 10 mg KOH/g0 %—31.12.2029
0.5057ex3907998080Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles0 %—31.12.2025
0.2923ex3908900010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390 %—31.12.2029
0.7428ex3909200010Polymer mixture, containing by weight:60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1),15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0),5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)0 %—31.12.2027
0.5032ex3909400020Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices0 %—31.12.2025
0.6423ex3909509020Preparation containing by weight:14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,3 % or more but not more than 5 % of enzymatically modified starch, and77 % or more but not more than 83 % of water0 %—31.12.2029
0.6420ex3909509030Preparation containing by weight:16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,19 % or more but not more than 23 % of diethylene glycol butyl ether, and60 % or more but not more than 64 % of water0 %—31.12.2029
0.6424ex3909509040Preparation containing by weight:34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,37 % or more but not more than 39 % of propylene glycol, and26 % or more but not more than 28 % of water0 %—31.12.2029
0.6921ex3910000015Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated0 %—31.12.2026
0.3260ex3910000020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]0 %—31.12.2029
0.7057ex3910000025Preparations containing by weight:10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5), and10 % or more, α-Butyldimethylsilyl- ω-3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)0 %—31.12.2026
0.7058ex3910000035Preparations containing by weight:30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)0 %—31.12.2026
0.4049ex3910000040Silicones of a kind used in the manufacture of long term surgical implants0 %—31.12.2026
0.7217ex3910000045Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa· s (CAS RN 70131-67-8)0 %—31.12.2026
0.4300ex3910000050Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum0 %—31.12.2027
0.7218ex3910000055Preparation containing by weight:55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)0 %—31.12.2026
0.7953ex3910000065Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)0 %—31.12.2025
0.5926ex3910000070Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices0 %—31.12.2029
0.8097ex3910000075Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder0 %—31.12.2025
0.8670ex3910000085Two-component silicone, with a viscosity of the mixture of 3000 cps or more, but not more than 6000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels0 %—31.12.2028
0.4413ex3911100081Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:an iodine value of more than 120 anda Gardner Colour of more than 10 for the pure product ora Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)0 %—31.12.2029
0.8220ex3911901915Polyetherimide of 4,4′-[(isopropylidene)bis(p-phenylenoxy)]diphthalic dianhydride and 1,3-benzenediamine or 1,4-benzenediamine (CAS RN 61128-46-9 or CAS RN 61128-47-0)0 %—31.12.2026
0.4280ex3911901930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %—31.12.2027
0.5145ex3911901940m-Xylene formaldehyde resin0 %—31.12.2026
0.8450ex3911901980Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) (CAS RN 25608-63-3 and CAS RN 25667-42-9) containing by weight not more than 20 % of additives0 %—31.12.2027
0.8218ex3911909923Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly(isobutylene-maleic anhydride) modified with:N,N-dimethylpropane-1,3-diamine,a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups,ethanol(CAS RN 497926-97-3)0 %—31.12.2026
0.3257ex3911909925Copolymer of vinyltoluene and α-methylstyrene0 %—31.12.2029
0.5109ex3911909935Alternated copolymer of ethylene and maleic anhydride (EMA)0 %—31.12.2025
0.8009ex3911909938Mixture containing by weight:90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)0 %—31.12.2025
0.3221ex3911909940Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight0 %—31.12.2029
0.3256ex3911909945Copolymer of maleic acid and methyl vinyl ether0 %—31.12.2029
0.8010ex3911909948Mixture containing by weight:90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)0 %—31.12.2025
0.3255ex3911909965Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether0 %—31.12.2029
0.4091ex3911909986Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)0 %—31.12.2026
0.4912ex3912110030Cellulose triacetate (CAS RN 9012-09-3)0 %—31.12.2026
0.4953ex3912110040Cellulose diacetate powder0 %—31.12.2025
0.3251ex3912398510Ethylcellulose, not plasticized0 %—31.12.2029
0.3253ex3912398520Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose0 %—31.12.2029
0.3252ex3912398530Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0 %—31.12.2029
0.6718ex3912398550Polyquaternium 10 (CAS RN 68610-92-4)0 %—31.12.2025
0.4017ex3912901020Hydroxypropyl methylcellulose phthalate0 %—31.12.2029
0.3749ex3913900085Sterile sodium hyaluronate (CAS RN 9067-32-7)0 %—31.12.2029
0.3249ex3913900095Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)0 %—31.12.2029
0.8323ex3914000010Aqueous suspension, containing by weight20 % or more but not more than 30 % of beaded agarose, modified with nitrilotriacetic acid and loaded with divalent nickel ions (CAS RN 1615227-97-8), and20 % or more but not more than 30 % of ethanol (CAS RN 64-17-5)0 %—31.12.2027
0.5988ex3916901010Rods with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene if present10 % or more but not more than 25 % of inorganic fillers0 %—31.12.2029
0.8116ex39173100ex39173200ex39173900302020Tubings:with an outer diameter of 0,33 mm or more but not more than 3,3 mm,with an inner diameter of 0,01 mm or more but not more than 2,1 mm,suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,suitable for all solutions used in chromatography,whether or not with fused silica,whether or not covered with PEEK,for use in chromatographic system0 %—31.12.2026
0.8268ex3917320030Heat shrinkable tube:containing by weight 80 % or more polymer,with an insulation resistance of 90 MΩ or more,with a dielectric strength of 35 kV / mm or more,with a wall thickness of 0,04 mm or more, but not more than 0,9 mm,with a lay-flat width of 18 mm or more, but not more than 156 mm,for use in the manufacture of aluminium electrolytic capacitors0 %—31.12.2029
0.8117ex3917400020Plastic fittings (kit of nuts and ferrules or nuts) and connectors:threaded,supported with or without a stainless steel ring,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,for tubings with:outer diameter of 0,33 mm or more but not more than 3,3 mm,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,suitable for all solutions used in chromatography,for use in the production of chromatographic systems0 %—31.12.2026
0.4641ex3917400091Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses0 %—31.12.2029
0.2421ex39191019ex39191080ex39199080102531Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2029
0.4800ex39191080ex391990802720Polyester film:coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 oC or more but not more than 200 oC, and a polyester liner, andon the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 oC or more but not more than 200 oC, and a polyester liner0 %—31.12.2027
0.2910ex3919108035Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %—31.12.2029
0.4303ex39191080ex391990804545Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %—31.12.2027
0.3036ex39191080ex391990805553Acrylic foam tape:covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive,covered on the other side with an acrylic pressure sensitive adhesive,covered on one or both sides with a release sheet,with a peel adhesion of more than 25 N/cm (at an angle of 90 o as determined by the ASTM D 3330 method)0 %—31.12.2027
0.2416ex39191080ex39199080ex39206100573030Reflecting sheet:of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped patterncovered on one or both sides with one or more layers of plastic or metallisation, andwhether or not covered on one side with a self-adhesive layer and a release sheet0 %—31.12.2029
0.6886ex3919108063Reflecting film consisting ofa layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,a layer of an acrylic resin having embedded glass beads,a layer of an acrylic resin hardened by a melamine cross-linking agent,a metal layer,an acrylic adhesive, anda release film0 %—31.12.2025
0.4545ex39191080ex391990807350Self-adhesive reflecting sheet whether or not in segmented pieces,whether or not containing a watermark,with or without an application tape coated on one side with an adhesive;the reflective sheet consists of:a layer of acrylic or vinyl polymer,a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,a layer of metallisation,an adhesive layer, anda release sheetwhether or not containing an additional layer of polyester0 %—31.12.2029
0.5166ex39191080ex391990807580Self-adhesive reflecting film, consisting of several layers including:a copolymer of acrylic resin,polyurethane,a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,glass microspheres, andan adhesive layer, with a release liner on one or both sides0 %—31.12.2026
0.8667ex39191080ex391990807848Polytetrafluoroethylene film,with a thickness of 50 μm or more,with a width of 6,30 mm or more but not more than 740 mm,an elongation at break of not more than 200 %, andcoated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 μm0 %—31.12.2028
0.3243ex3919908023Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner0 %—31.12.2029
0.4760ex3919908024Reflecting laminated sheet:consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,covered on both sides with one or more layers of plastic material andcovered on one side with an adhesive layer and a release sheet0 %—31.12.2029
0.4415ex3919908033Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm0 %—31.12.2029
0.4445ex3919908049Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet0 %—31.12.2029
0.5507ex3919908051Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet0 %—31.12.2029
0.4532ex3919908054Poly(vinyl chloride) film, on one side covered witha polymer layeran adhesive layera release liner, on one side embossed, containing oblate spheres;whether or not on the other side covered with an adhesive layer and a metallised polymer layer0 %—31.12.2029
0.8629ex3919908055Black polyvinyl chloride film:with a gloss of more than 25 degrees according to ASTM D 2457,whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release linerfor use in the manufacture of die-cut films for interior and exterior surfaces of cars0 %—31.12.2028
0.4314ex3919908056Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm0 %—31.12.2029
0.4947ex3919908065Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner0 %—31.12.2025
0.4925ex3919908070Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad0 %—31.12.2025
0.4964ex3919908082Reflecting film consisting of:a polyurethane layer,a glass microspheres layer,a metallised aluminium layer, andan adhesive, covered on one or both sides with a release liner,whether or not a poly(vinyl chloride) layer,a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use0 %—31.12.2025
0.4459ex3919908083Reflector or diffuser sheets, in rolls,for protection against ultraviolet or infra-red heat radiation, to be affixed to windows orfor equal transmission and distribution of light, intended for LCD modules0 %—31.12.2027
0.6640ex3920104040Tubular layered film predominately of polyethylene:consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,having a total thickness of 55 μm or more,having a diameter of 500 mm or more but not more than 600 mm0 %—31.12.2025
0.3754ex3920108940Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm0 %—31.12.2027
0.5139ex3920108955Ethylene vinyl acetate (EVA) film:with a raised relief surface with embossed undulations,not laminated,not cross-linked, andwith a thickness of more than 0,3 mm0 %—31.12.2026
0.8205ex3920202150Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron0 %—31.12.2026
0.3028ex3920202970Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:a thickness of 55 μm or more but not more than 97 μm,a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, anda tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa0 %—31.12.2029
0.5167ex3920202994Mono-axial oriented, co-extruded film:consisting of 3 to 5 layers,each layer mainly consisting of polypropylene and/or polyethylene,each layer containing not more than 10 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 75 μm0 %—31.12.2027
0.3024ex3920431092Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)0 %—31.12.2029
0.3026ex3920431095Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet0 %—31.12.2029
0.5930ex3920491030Film of a (polyvinyl)chloride-copolymercontaining by weight 45 % or more of fillerson a support0 %—31.12.2027
0.3021ex3920510020Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm0 %—31.12.2029
0.5506ex3920510030Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 125 μm0 %—31.12.2029
0.5753ex3920510040Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)0 %—31.12.2029
0.7949ex3920610040Extruded thermoplastic foils or films of polycarbonate with:matt surface texture on both sidesa thickness of more than 50 μm but not more than 200 μm,a width of 800 mm or more, but not more than 1500 mm, anda length of 300 m or more, but not more 2500 m0 %—31.12.2025
0.8274ex3920610050Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a:total thickness of more than 230 μm but not more than 270 μm,top layer thickness of more than 40 μm but not more than 55 μm,defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287),UV-stabilized top layer0 %—31.12.2026
0.7418ex39206219ex392062900510Poly(ethylene terephthalate) film in rolls:with a thickness of 0,335 mm or more but not more than 0,365 mm, andcoated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm0 %—31.12.2027
0.3234ex3920621908Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:only dyed in the mass, ordyed in the mass and metallised on one side0 %—31.12.2029
0.8438ex3920621928Non-transparent film of poly(ethylene terephthalate) or poly(vinyl difluoride):each outer layer with a thickness of 7 μm or more but not more than 80 μm,with a tensile strength of 300 N/cm2 or more (ASTM D-882),with a total thickness of 200 μm or more but not more than 350 μm, andwith a width of 600 mm or more but not more than 1600 mm,covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites0 %—31.12.2027
0.4520ex3920621932Transparent poly(ethylene terephthalate) film:having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 μm or more but not more than 80 μm, whether coated with an acrylic-based organic material or not,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin,with a light transmittance of more than 70 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm0 %—31.12.2028
0.3356ex3920621938Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm0 %—31.12.2029
0.3357ex3920621948Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)0 %—31.12.2025
0.2589ex3920621952Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D257 method)0 %—31.12.2029
0.4344ex3920621960Poly(ethylene terephthalate) film:of a thickness of not more than 20 μm,coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2 μm0 %—31.12.2027
0.8011ex39206219ex392062906820Poly(ethylene terephthalate) film in rolls:with a thickness of 50 μm or more but not more than 350 μm, andcovered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm0 %—31.12.2025
0.3328ex3920690020Film of poly(ethylene naphthalene-2,6-dicarboxylate)0 %—31.12.2029
0.7882ex3920690030Mono- or multilayer, transverse oriented, shrink film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 20 μm or more but not more than 100 μm,with a length of 2385 m or more but not more than 9075 m,biodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2029
0.7883ex3920690070Mono- or multilayer, biaxially oriented film:composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,with a thickness of 9 μm or more but not more than 120 μm,with a length of 1395 m or more but not more than 21560 m,biodegradable and compostable (as determined by the method EN 13432)0 %—31.12.2029
0.4766ex3920910052Poly(vinyl butyral) film:containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,with a thickness of 0,73 mm or more but not more than 1,50 mm0 %—31.12.2029
0.3329ex3920910091Poly(vinyl butyral) film having a graduated coloured band3 %—31.12.2029
0.3136ex3920910093Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm0 %—31.12.2029
0.4508ex3920910095Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser0 %—31.12.2029
0.3917ex3920992840Polymer film containing the following monomers:poly (tetramethylene ether glycol),bis (4-isocyanotocyclohexyl) methane,1,4-butanediol or 1,3-butanediol,with a thickness of 0,25 mm or more but not more than 5,0 mm,embossed with a regular pattern on one surface,and covered with a release sheet0 %—31.12.2029
0.8005ex3920992848Thermoplastic polyurethane foil in rolls, with:a width of 900 mm or more but not more than 1016 mm,a matt finish,a thickness of 0,4 mm (± 8 %),an elongation at break of 480 % or more (ASTM D412 (Die C)),a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),a Shore A hardness of 90 (± 3) (ASTM D2240),a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),a melting point of 165 oC (± 10 oC)0 %—31.12.2025
0.4192ex3920992850Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film0 %—31.12.2026
0.6579ex3920992865Matt, thermoplastic polyurethane foil in rolls with:a width of 1640 mm (± 10 mm),a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),a thickness of more than 365 μm but not more than 760 μm,a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),an elongation to break of 470 % (as determined by the method: EN ISO 527)0 %m231.12.2029
0.5315ex3920992870Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:microspheres with a coating of metal, whether or not alloyed with gold,an adhesive layer,with a protective layer of silicone or poly(ethylene terephthalate) on one side,with a protective layer of poly(ethylene terephthalate) on the other side, andwith a width of 5 cm or more but not more than 100 cmwith a length of not more than 2000 m0 %—31.12.2026
0.3326ex3920995925Poly(1-chlorotrifluoroethylene) film0 %—31.12.2029
0.3135ex3920995965Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %0 %—31.12.2029
0.6066ex3921190030Blocks with cellular structure, containing by weight:polyamide-6 or poly(epoxy anhydride)7 % or more but not more than 9 % of polytetrafluorethylene if present10 % or more but not more than 25 % of inorganic fillers0 %—31.12.2029
0.6911ex3921190040Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:a width of 98 mm or more but not more than170 mm,a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators3,2 %—31.12.2025
0.7263ex3921190045Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:zero transversal production direction (TD) shrinkage,a total thickness of 8 μm or more, but not more than 50 μm,a width of 15 mm or more, but not more than 900 mm,a length of more than 200 m, but not more than 8000 m,an average pore size between 0,02 μm and 0,1 μm,laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,coated or not with surfactant,coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm3,2 %—31.12.2025
0.7132ex3921190050Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth witha total thickness of more than 0,05 mm but not more than 0,20 mm,a water entry pressure between 5 and 200 kPa according to ISO 811, andan air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-50 %—31.12.2026
0.7280ex3921190060Multi-porous multilayer separator foil with:one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,a width of 65 mm or more but not more than 170 mm,a total thickness of 0,01 mm or more but not more than 0,03 mm,a porosity of 0,25 or more but not more than 0,650 %m231.12.2027
0.3002ex3921190095Film of polyethersulfone, of a thickness of not more than 200 μm0 %—31.12.2029
0.3003ex3921901010Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres0 %—31.12.2029
0.6156ex3921901030Multilayer film consisting of:a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm0 %m231.12.2029
0.4844ex3921905525Prepreg sheets or rolls containing polyimide resin0 %—31.12.2029
0.7510ex3921905535Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards0 %m231.12.2029
0.6742ex3921905540Three layered fabric sheet, in rolls,comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,coated on both sides with polyamide,of a total thickness not more than 135 μm,of a total weight not more than 80 g/m20 %m231.12.2025
0.8291ex3921905570Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with:a total thickness of 0,25 mm or more but not more than 0,40 mm,a total weight of 109 g/m2 or more but not more than 114 g/m20 %m231.12.2026
0.5396ex3923109010Photomask or wafer compacts:consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,having non porous, abrasion resistant or impact resistant surface properties,fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage andwith or without a gasket seal,of a kind used in the photolithography or other semiconductor production to house photomasks or wafers0 %—31.12.2026
0.7630ex3926300040Plastic internal door handle used in the manufacture of motor vehicles0 %—31.12.2029
0.7335ex39263000ex392690975048Coated interior or exterior decorative parts consisting of:a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, anda PVC foil,not containing layers of copper, nickel or chromium,for use in the manufacturing of parts for motor vehicles of heading 8701 to 87050 %p/st31.12.2027
0.2764ex3926909710Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm0 %—31.12.2029
0.8664ex3926909722Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with:a density of 20 kg/m3 or more, but not more than 40 kg/m3,a tensile strength of not less than 170 kPa,water absorption coefficient of not greater than 1 %,a length of 5 mm or more but not more than 300 mm,a height of 10 mm or more but not more than 400 mm,a depth of 5 mm or more but not more than 250 mm0 %—31.12.2028
0.6717ex3926909723Plastic cover with clips for the exterior rear-view mirror of motor vehicles0 %p/st31.12.2025
0.7445ex3926909727Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror0 %—31.12.2029
0.5474ex3926909730Parts of car radio and car air-conditioner front panelsof acrylonitrile-butadiene-styrene with or without polycarbonate,coated with a copper, a nickel and a chrome layers,with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm0 %—31.12.2026
0.6301ex3926909733Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls0 %p/st31.12.2029
0.7061ex3926909740Silicone shell for breast implant0 %—31.12.2026
0.3850ex3926909743Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm0 %—31.12.2029
0.8118ex3926909758Plastic ferrules and/or plugs:supported with or without a stainless steel ring,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,for tubings with:outer diameter of 0,33 mm or more but not more than 3,3 mm,suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,suitable for all solutions used in chromatography,for use in the production of chromatographic systems0 %—31.12.2026
0.7196ex3926909777Silicone decoupling ring with an inner diameter of 14,7 mm or more but not more than 16,0 mm, in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems0 %p/st31.12.2026
0.3046ex4007000010Siliconated vulcanised rubber thread and cord0 %—31.12.2029
0.8504ex40093100ex400932001020Multilayered rubber pipe, reinforced with aramide fabric, whether or not having polyamide connection elements and steel clamps, for use in the manufacture of automotive heat exchangers and/or condenser in automotive air conditioning systems0 %—31.12.2027
0.6708ex4009420020Rubber brake hose with:textile strings,a wall thickness of 3,2 mm,a metal hollow terminal pressed on both ends, andone or more mounting brackets,for use in the manufacture of goods of Chapter 870 %—31.12.2025
0.7042ex40103100ex40103300ex40103900101010Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 870 %—31.12.2029
0.6844ex4016930030Rectangular ethylene-propylene-diene rubber gasket, with:a length of 72 mm or more but not more than 825 mm,a width of 18 mm or more but not more than 155 mm,a peak temperature of 150 oC or more but not more than 240 oC,a permissible material outflow at the place of the mold split of not more than 0,3 mm0 %—31.12.2025
0.8646ex4016995210Hanger of the exhaust muffler consisting of:a steel bracket with at least one mounting hole andsilent block,for use in the manufacture of goods of Chapter 870 %—31.12.2028
0.7170ex4016995710Air intake hose for air supply to the combustion part of the engine comprising at least:one flexible rubber hose,one plastic hose, andmetal clips,whether or not a resonatorfor use in the manufacture of goods of Chapter 870 %p/st31.12.2026
0.5148ex4016999730Tyre moulding bladder0 %—31.12.2026
0.5842ex4104411910Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry0 %—31.12.2029
0.25554105100041053090Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2029
0.25534106210041062290Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %—31.12.2029
0.255441063100410632004106409041069200Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 41140 %—31.12.2029
0.6223ex4408393010Okoumé sheets for veneering for plywood panelswith a largest dimension of 900 mm or more, but not more than 3250 mm,with a smallest dimension of 95 mm or more but not more than 2000 mm,with a thickness of 0,5 mm or more, but not more than 4 mm,unsanded,not planed, andsawn, sliced or peeled lengthwise0 %—31.12.2029
0.8737ex4408399510Iroko sheets for veneering for plywood panels:with a largest dimension of 900 mm or more, but not more than 3250 mm,with a smallest dimension of 95 mm or more but not more than 2000 mm,with a thickness of more than 1 mm, but not more than 4 mm,unsanded,not planed, andsawn, sliced or peeled lengthwise0 %—31.12.2029
0.8733ex4408399520Igaganga sheets for veneering for plywood panels:with a largest dimension of 900 mm or more, but not more than 3250 mm,with a smallest dimension of 95 mm or more but not more than 2000 mm,with a thickness of more than 1 mm, but not more than 4 mm,unsanded,not planed, andsawn, sliced or peeled lengthwise0 %—31.12.2029
0.8738ex4408399530Ozigo sheets for veneering for plywood panels:with a largest dimension of 900 mm or more, but not more than 3250 mm,with a smallest dimension of 95 mm or more but not more than 2000 mm,with a thickness of more than 1 mm, but not more than 4 mm,unsanded,not planed, andsawn, sliced or peeled lengthwise0 %—31.12.2029
0.8372ex4411129210Fibreboard:with a thickness of 2,20 mm or more but not more than 2,80 mm,with a density of 0,95 g/cm3 or more,lacquered or coated with melamine foil on both sides, andwith dimensions of 1300 mm x 1100 mm or less0 %—31.12.2027
0.4217ex5004001010Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk0 %—31.12.2026
0.2551ex50050010ex500500901010Yarn spun entirely from silk waste (noil), not put up for retail sale0 %—31.12.2029
0.254452081110Fabrics for the manufacture of bandages, dressings and medical gauzes5,2 %—31.12.2029
0.7372ex5311009010Plain-woven fabric of paper yarns glued on a tissue paper layer:with a weight of 190 g/m2 or more but not more than 280 g/m2, andcut into rectangles with a side length of 40 cm or more but not more than 140 cm0 %—31.12.2027
0.2975ex5402490030Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures0 %—31.12.2029
0.3098ex5402490050Non-textured filament yarn of poly(vinyl alcohol)0 %—31.12.2029
0.8108ex5403310010Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments0 %—31.12.2025
0.8225ex5404190060Chemically tapered synthetic filaments of polyester with:a diameter of 0,1 mm or more but not more than 0,6 mm,a length of 30 mm or more but not more than 120 mm,for use in the manufacture of paintbrushes0 %—31.12.2026
0.3311ex5404909020Strip of polyimide0 %—31.12.2029
0.8382ex5407300010Open mesh fabric made of thermally cross-bonded filaments of a polyolefin, with a density of 0,94 g/cm3 or more, with:a weight of 21 g/m2 or more but not more than 24 g/m2,a width of 560 mm or more but not more than 1200 mm,a thickness of 100 μm or more but not more than 120 μm,an elongation at break of not more than 20 % (ASTM D5034, machine direction),an elongation at break of not more than 22 % (ASTM D5034, cross direction),with a stretch of not more than 100 N /5 cm (ASTM D882, machine direction), andwith a stretch of not more than 130 N /5 cm (ASTM D882, cross direction)0 %—31.12.2027
0.3214ex55039000ex55069000ex56013000201010Poly(vinyl alcohol) fibres, whether or not acetalized0 %—31.12.2029
0.3212ex56031110ex56031190ex56031210ex56031290ex56039110ex56039190ex56039210ex560392901010101010101010Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:of a thickness of 200 μm or more but not more than 280 μm andof a weight of 20 g/m2 or more but not more than 50 g/m20 %m231.12.2029
0.2552ex56031290ex56031390ex56031480ex56039290ex56039390ex56039480303010604030Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0 %m231.12.2028
0.2548ex56031290ex560313906060Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2029
0.5059ex5603131020Non-woven of spunbonded polyethylene, with a coating,of a weight of more than 80 g/m2 but not more than 105 g/m2 andan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2025
0.8024ex5603141030Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2,with a filtration efficiency of class M or better (according to DIN 60335-2-69),pleatable,with at least one of following treatments:a coating or covering with polytetrafluoroethylene (PTFE),a coating with aluminium particles,a coating of phosphorous based flame retardants,a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer0 %m231.12.2029
0.5987ex5603148060Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:of weight of 160 g/m2 or more but not more than 300 g/m2,with a filtration efficiency of class M or better (according to DIN 60335-2-69),pleatable,with or without an expanded polytetrafluoroethylene (ePTFE) membrane0 %m231.12.2028
0.3042ex56039290ex560394807040Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene0 %m231.12.2028
0.5197ex56039290ex560393908050Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch propertiesfor use in the manufacture of infant/child care products0 %m231.12.2026
0.3210ex5603948020Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips0 %m231.12.2028
0.2415ex5803001091Gauze of cotton, of a width of less than 1500 mm0 %—31.12.2029
0.7081ex5903209020Two layers’ plastic-laminated textile fabric with:one layer consisting of knitted or crocheted polyester textile fabric,other layer consisting of polyurethane foam,a weight of 150 g/m2 or more, but not more than 500 g/m2,a thickness of 1 mm or more, but not more than 5 mmfor use in the manufacture of the retractable roof of motor vehicles0 %—31.12.2026
0.8213ex5906999030Woven and coated rubberised textile fabric with the following characteristics:with three layers,the outer layers consist of a natural rubber, EPDM and chloropen rubber compound,the middle layer consists of polyester fabric,for use in the manufacture of life rafts0 %—31.12.2026
0.2453ex5907000010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm0 %—31.12.2026
0.3207ex59119099ex842199903092Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %—31.12.2029
0.4638ex5911909940Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %—31.12.2029
0.7340ex5911909950Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers0 %—31.12.2027
0.6469ex6804210020Discsof synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,having a self-sharpening effect by constant release of the diamonds,suitable for abrasive cutting of wafers,whether or not containing a hole in the centre,whether or not on a supportwith a weight of not more than 377 g per piece andwith an external diameter of not more than 206 mm0 %p/st31.12.2029
0.8666ex6804210030Steel wire used for cropping and squaring semiconductors:coated with diamond grains of 5 μm or more but not more than 55 μm,with a wire diameter of 45 μm or more, but not more than 370 μm,a breaking strength of 11,5 N or more but not more than 200 N0 %—31.12.2028
0.2755ex6813890020Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components0 %—31.12.2029
0.5931ex6814100010Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres0 %—31.12.2029
0.2546ex6903909040Silicon carbide reactor tubes and holders having a maximum service temperature of 1370 oC or more0 %—31.12.2029
0.4978ex6909190020Silicon nitride (Si3N4) rollers or balls0 %—31.12.2025
0.6071ex6909190025Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide0 %—31.12.2029
0.3403ex6909190030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0 %—31.12.2029
0.8028ex6909190040Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics:extruded fired ceramic bound multicellular cylindrical structure,5 % or more by weight but not more than 70 % by weight of activated carbon,30 % or more by weight but no more than 90 % by weight of ceramic binder,with a diameter of 29 mm or more but no more than 41 mm,a length of not more than 150 mm,fired at temperature of 800 oC or more0 %p/st31.12.2025
0.2538ex69091900ex691490005020Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:2 % or more of diboron trioxide,28 % or less of silicon dioxide and60 % or more of dialuminium trioxide0 %—31.12.2029
0.3766ex6909190060Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end0 %—31.12.2029
0.4582ex6909190070Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section0 %—31.12.2029
0.3404ex6914900030Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm0 %—31.12.2029
0.8265ex7007111010Specifically shaped and toughened safety glass:with a width of 200 mm or more but not more than 600 mm,with a height of 150 mm or more but not more than 500 mm,for use in the manufacture of motor vehicle window assemblies0 %—31.12.2026
0.6380ex7009100030Layered glass with mechanical dimming ability by different angles of incident light comprising:whether or not a layer of chrome,a break-resistance adhesive tape or hot-melt adhesive, anda release film on the front side and protective paper at the back side,of a kind used for interior rear-view mirrors of vehicles0 %p/st31.12.2029
0.5789ex7009100050Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors:whether or not equipped with plastic backing plate,whether or not equipped with a heating element,whether or not equipped with Blind Spot Module (BSM) display0 %—31.12.2027
0.6870ex7009100060Electrochromic self-dimming inside rear-view mirror:with a mirror supportin a plastic casing andwith an integrated circuit,whether or not with a high beam assistant,whether or not with a digital compass,whether or not with a garage door opener,whether or not with an integrated toll module,whether or not with a camera for driver and/or cabin monitoring,whether or not with an infrared filter,for use in the manufacture of motor vehicles of Chapter 870 %—31.12.2025
0.8663ex7009910010Chrome-plated glass mirror with:a length of 155 mm or more, but not more than 158 mm,a height of 115 mm or more, but not more than 120 mm,a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5000 cd/m2 and a central luminescence greater than or equal to 7000 cd/m2,a heater foil, with a resistance of 1,1 kΩ or more, but not more than 1,35 kΩ,designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors0 %—31.12.2028
0.8682ex7009910020Aspherical, convex or flat chrome-plated glass, ready for framing:with a length of 140 mm or more but not more than 215 mm,with a height of 104 mm or more but not more than 138 mm,with curvature radius of 0 mm or more but not more than 1330 mm,with a reflectance of more than 40 %,for the manufacture of automotive mirrors0 %—31.12.2028
0.3400ex7014000010Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware0 %—31.12.2029
0.5750ex70191200ex701912000525Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (±0,5 μm)0 %—31.12.2027
0.2532ex7019130010Yarn of 33 tex or a multiple thereof (±7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers0 %—31.12.2029
0.5749ex7019130015S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (- 1 μm / +1,5 μm)0 %—31.12.2027
0.5021ex7019130020Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2025
0.5020ex7019130025Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %—31.12.2025
0.2535ex7019130030Yarn of E-glass of 22 tex (±1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate0 %—31.12.2029
0.4848ex7019130050Yarn of 11 tex or a multiple thereof (±7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated0 %—31.12.2027
0.7056ex70196100ex701963007030E-fibre glass fabrics:having a weight of 20 g/m2 or more, but not more than 214 g/m2,surface treated with an organosilane coupling agent,in rolls,having a humidity content by weight of 0,13 % or less, andhaving not more than 3 hollow fibres out of 100000 fibres,for the exclusive use in the manufacture of prepregs and copper clad laminates0 %m231.12.2026
0.7647ex7019640040Epoxy resin coated glass woven fabric containing by weight:91 % or more but not more than 93 % of glass fibres,7 % or more but not more than 9 % of epoxy resin0 %—31.12.2029
0.4059ex70197100ex701972005050Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts0 %—31.12.2026
0.3940ex7019809010Glass wool in which fibres of a diameter of less than 4,6 μm predominate0 %—31.12.2028
0.4024ex7019900030High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)0 %—31.12.2029
0.8616ex7019900050Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations0 %—31.12.2028
0.5348ex70200010ex761699901077Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body0 %p/st31.12.2026
0.7266ex7020001020Raw material for optical elements of fused silicon dioxide with:a thickness of 10 cm or more but not more than 40 cm, anda weight of 100 kg or more0 %p/st31.12.2027
0.4127ex7201101110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm0 %—31.12.2026
0.4128ex7201103010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon0 %—31.12.2026
0.335372025000Ferro-silico-chromium0 %—31.12.2029
0.4853ex7202998010Ferro-dysprosium, containing by weight:78 % or more of dysprosium, and18 % or more but not more than 22 % of iron0 %—31.12.2025
0.7502ex7318240040Tube or pipe restraint joint elements:of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,produced by metal injection moulding,with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/– 1),measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm0 %—31.12.2029
0.4126ex7326200020Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling0 %—31.12.2026
0.6680ex73269098ex790700004010Iron, steel and/or zinc alloy weights:with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,whether or not with parts of other material,whether or not with parts of other metals,whether or not surface treated,whether or not printed,of a kind used for the production of remote controls0 %—31.12.2025
0.8480ex7326909860Vane ring of a kind for fastening gas flow control blades:of iron or steel alloy,with a heat resistance of 830 oC or more but not more than 1050 oC,with an external diameter of not more than 92 mm,with holes for holding the gas flow control blades,for use in the manufacture of turbochargers0 %—31.12.2027
0.8512ex7326909870Disc of a kind for ensuring the gas flow channel width:of iron or steel alloy,with a heat resistance of 830 oC or more but not more than 1050 oC,with an external diameter of not more than 92,5 mm,with an internal diameter of not more than 62 mm,for use in the manufacture of turbochargers0 %—31.12.2027
0.3352ex7410210010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0 %—31.12.2029
0.7509ex7410210020Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards0 %m231.12.2029
0.3005ex7410210030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil0 %—31.12.2029
0.3926ex7410210040Sheet or plates:consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, orconsisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm0 %—31.12.2029
0.4479ex7410210050Plates:consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, andwith a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-6500 %—31.12.2029
0.7341ex7413000020Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed0 %—31.12.2027
0.7911ex7506200010Sheets and strips in coils of nickel alloy C276 (EN 2.4819) witha thickness of 0,5 mm or more but not more than 3 mm,a width of 770 mm or more but not more than 1250 mm0 %—31.12.2029
0.7913ex7506200020Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:a thickness of 0,5 mm or more but not more than 3 mm,a width of 250 mm or more but not more than 1219 mm0 %—31.12.2025
0.7752ex7604210010Hollow profile with:one closed chamber of aluminum alloy 6063-T5 or 6060-T5,a wall thickness of not more than 0,7 mm, andan anodized layer of 10 μm at the surface,for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases0 %—31.12.2029
0.5029ex76042910ex76061299ex76061299102125Sheets and bars of aluminium-lithium alloys0 %—31.12.2027
0.6417ex7604291040Bars and rods of aluminium alloys containing by weight:0,25 % or more but not more than 7 % of zinc, and1 % or more but not more than 3 % of magnesium, and1 % or more but not more than 5 % of copper, andnot more than 1 % of manganeseconsistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process0 %—31.12.2029
0.2410ex7605190010Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm0 %—31.12.2029
0.8344ex7605210010Aluminium alloy wire with a diameter of 9,50 mm or more but not more than 19,15 mm, in coils, for use in the manufacture of aeronautical fasteners0 %—31.12.2027
0.7746ex7608208120Seamless aluminium alloyed extruded tubes (Aluminum 6061F according to standard ASTM B241) with:an outer diameter of 320 mm or more but not more than 400 mm, anda wall thickness of 8 mm or more but not more than 10 mm,for use in the manufacture of high pressure vessels0 %—31.12.2029
0.6138ex7608208930Seamless aluminium alloyed extruded tubes with:an outer diameter of 60 mm or more but not more than 420 mm, anda wall thickness of 10 mm or more but not more than 80 mm0 %—31.12.2029
0.8194ex76090000ex841590003045Aluminium connecting block for automotive air conditioning systems:with a T6 hardening,equipped with round stubs with a circumferential outer groove,with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,with a distance between holes of 15 mm or more but not more than 22 mm,with sockets designed for brazing or clamping,with mounting holes for M6 or M8 mounting screw, threaded or not,with a width of 5 mm or more but not more than 16 mm,for connecting a compressor, a condenser, an evaporator, a chiller and other lines0 %—31.12.2026
0.8464ex7609000040Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,with a weight of 0,02 kg or more, but not more than 0,25 kg,for use in the manufacture of cooling system in vehicles of Chapter 870 %p/st31.12.2027
0.8503ex7609000050Machined aluminium components:containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,containing by weight 0,55 %, or more but not more than 0,61 % of silicon,with a hardening state of T5 or T6,with a mass of 0,05 kg or more, but not more than 0,2 kg,for use in the manufacture of CO2 cooling systems in motor vehicles0 %p/st31.12.2027
0.8493ex7609000060Aluminium connection block:with a weight of 3 g or more but not more than 400 g,manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),with sockets designed for brazing or fastening,with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,for the manufacture of automotive cooling and air conditioning systems0 %p/st31.12.2027
0.5357ex76169990ex84828000ex88073000701040Connecting components for use in the production of helicopter tail rotor shafts0 %p/st31.12.2026
0.6730ex8101960010Tungsten wire containing by weight 99 % or more of tungsten with:a maximum cross-sectional dimension of not more than 50 μma resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre0 %—31.12.2025
0.7245ex8101960020Tungsten wirecontaining by weight 99,95 % or more of tungsten, andwith a maximum cross-sectional dimension of not more than 1,02 mm0 %—31.12.2027
0.5694ex8102100010Molybdenum powder with:a purity by weight of 99 % or more anda particle size of 1,0 μm or more, but not more than 5,0 μm0 %—31.12.2027
0.5097ex8104300035Magnesium powder:of purity by weight of more than 99,5 %, andwith a particle size of not more than 0,8 mm0 %—31.12.2025
0.3416ex8108200010Titanium sponge0 %—31.12.2029
0.4553ex8108200030Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm0 %—31.12.2029
0.3211ex8108300010Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium0 %—31.12.2029
0.4363ex8108903010Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 650400 %—31.12.2029
0.7330ex8108903015Rods and wire of an alloy of titanium with:a uniform solid cross-section in the form of a cylinder,with a diameter of 0,8 mm or more, but not more than 5 mm,an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,a silicon content by weight of 0,3 % or more, but not more than 0,6 %,a niobium content by weight of 0,1 or more, but not more than 0,3 %, andan iron content by weight of not more than 0,2 %0 %—31.12.2027
0.7942ex8108903035Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm0 %—31.12.2025
0.4904ex8108903045Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 49670 %—31.12.2025
0.8105ex8108903055Wires of an alloy of titanium:with a niobium content by weight of 42 % or more, but not more than 47 %,with a diameter of 2,36 mm or more, but not more than 7,85 mm,in coils of 15 kg or more, but not more than 45 kg,complying with standard AMS 49820 %—31.12.2025
0.7077ex8108903060Forged cylindrical bars of titanium with:a purity of 99,995 % by weight or more,a diameter of 140 mm or more but not more than 200 mm,a weight of 5 kg or more but not more than 300 kg0 %p/st31.12.2026
0.5351ex8108903070Wire of an titanium alloy containing by weight:22 % (± 1 %) of vanadium, and4 % (±0,5 %) of aluminiumor15 % (± 1 %) of vanadium,3 % (±0,5 %) of chromium,3 % (±0,5 % of tin and3 % (±0,5 %) of aluminium0 %—31.12.2026
0.7285ex8108905045Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:a thickness of 0,4 mm or more, but not more than 100 mm,a length of not more than 14 m, anda width of not more than 4 m0 %—31.12.2027
0.5352ex8108905055Plates, sheets, strip and foil of an alloy of titanium0 %—31.12.2026
0.6524ex8108905080Plates, sheets, strips and foil of non-alloyed titaniumof a width of more than 750 mm,of a thickness of not more than 3 mm0 %—31.12.2029
0.6500ex8108905085Strip or foil of non-alloyed titanium:containing more than 0,07 % by weight of oxygen (O2),of a thickness of 0,4 mm or more but not more than 2,5 mmconforming to the Vickers hardness HV1 standard of not more than 170of a kind used in the manufacture of welded tubes for nuclear power plant condensers0 %—31.12.2029
0.5353ex81089090ex900390003020Parts of spectacle frames and mountings, includingtemples,blanks of a kind used for the manufacture of spectacle parts andbolts of the kind used for spectacle frames and mountings,of a titanium alloy0 %p/st31.12.2026
0.3415ex8110100010Antimony in the form of ingots0 %—31.12.2029
0.3413ex8112995010Alloy of niobium (columbium) and titanium, in the form of bars and rods0 %—31.12.2029
0.4316ex8113009010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %—31.12.2027
0.6805ex8113009020Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules0 %—31.12.2025
0.5570ex8207301010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles0 %p/st31.12.2027
0.5024ex83016000ex84199085ex84799070ex84819000ex84859090ex85030099ex85159080ex85371098ex85389099ex87089910ex870899973040305030434055705522Silicone or plastic keyboards, comprising:parts of common metal, andwhether or not comprising parts of plastic,epoxy resin reinforced with fiberglass or wood,whether or not printed or surface-treated,with or without electrical conductors,with or without a membrane bonded to the keyboard,with or without mono or multilayer protective film0 %p/st31.12.2025
0.8247ex8302100020Armrest hinge made of magnesium with:a length of 239 mm or more but not more than 270 mm,a width of 150 mm or more but not more than 175 mm,a height of 110 mm or more but not more than 135 mm,mounting holes for a lock mechanism0 %—31.12.2026
0.8304ex8302300020Two cold-formed steel supports:with a length of 120 mm or more but not more than 180 mm,with a width of 50 mm or more but not more than 80 mm,with a height of 35 mm or more but not more than 80 mm,with a movable riveted connection,with or without elastomeric bumper,forming a mechanism for indirect movement of the mechanism of the longitudinal positioner of car seats, interacting with the safety latch,attached to the mechanism of the longitudinal positioner by means of a detachable screw connection, riveting, welding or spot welding0 %—31.12.2026
0.2602ex8309909010Aluminium can ends:with a diameter of 99,00 mm or more but not more than 136,5 mm (±1mm),whether or not with a "ring-pull" aperture0 %p/st31.12.2027
0.3947ex8401300020Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors0 %—31.12.2029
0.6319ex8401400010Stainless steel absorber control rods, filled with neutron absorbing chemical elements0 %p/st31.12.2029
0.8668ex8402900010Pre-assembled process module unit of an ethane cracker unit, containing:a dilution steam generator system which produces steam from pretreated quench water for use as dilution steam in steam cracking furnaces,a condensate system that collects, filters and deaerates steam condensates, which are subsequently recycled as boiler feed water and further distributed within the cracker unit, anda flare system that collects, separates and vaporizes non-recyclable hydrocarbon containing releases from different equipment in a steam cracker, and transfers those towards flares0 %—30.06.2025
0.8012ex8406820010Industrial steam turbine with:an output of 2 MW or more but not more than 40 MW,designed for a pressure of not more than 140 bar and a temperature of not more than 540 oC,equipped with single – or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar0 %—31.12.2025
0.3830ex84073320ex84073380ex84079080ex8407909010101010Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of:lawn mowers of subheadings 843311, 843319 and 843320,tractors of subheadings 87019190, 87019290 whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cm3 of subheading 84332010 orsnowploughs and snow blowers of subheading 8430200 %—31.12.2027
0.8753ex8407338020New, single-cylinder, four stroke, spark-ignition internal combustion engine with:a cylinder capacity exceeding 500 cm3 but not exceeding 1000 cm3,overall dimensions of not more than: 490 mm (length) x 390 mm (width) x 590 mm (height),a power of 22 kW or more but not more than 35 kW,equipped with output shaft having an end diameter of 30 mm and a taper of 6 degrees (+/- 1 degree),whether or not equipped with starter, throttle body, spark plug wire, fuel rail and injector,for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2029
0.8754ex8407338030New, twin-cylinder, four-stroke, spark-ignition internal combustion engine with:a cylinder capacity exceeding 500 cm3 but not exceeding 1000 cm3,overall dimensions of not more than: 470 mm (length) x 450 mm (width) x 600 mm (height),a power of 40 kW or more but not more than 86 kW,whether or not equipped with overhead camshaft, starter motor, spark plug wires, fuel rail and injectors,for use in the manufacture of all-terrain or utility task vehicles0 %—31.12.2029
0.8260ex8407341010Spark-ignition reciprocating or rotary internal combustion piston engines, with:a cylinder capacity of 1200 cm3 or more but not more than 2000 cm3a power of 95 kW but not more than 135 kW,a weight of not more than 120 kg,for use in the manufacture of motor vehicles of heading 87030 %—31.12.2026
0.8751ex8407349110New dual cylinder, four stroke internal combustion spark-ignition engine with:a cylinder capacity exceeding 1000 cm3 but not exceeding 1250 cm3,overall dimensions of not more than: 700 mm (length) x 430 mm (width) x 610 mm (height),a power of 60 kW or more but not more than 110 kW,whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator,for use in the manufacture of motorcycle bikes0 %—31.12.2029
0.8750ex8407349910New dual cylinder, air cooled, four stroke 49 degree V-twin internal combustion spark-ignition engine with:a cylinder capacity exceeding 1800 cm3,overall dimensions of not more than: 800 mm (length) x 500 mm (width) x 600 mm (height),a power of 60 kW or more but not more than 75kW,equipped with a dry sump system with an intermediate wet receptacle,whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator,for use in the manufacture of motorcycle bikes0 %—31.12.2029
0.3828ex8407901010Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 85080 %—31.12.2026
0.8403ex8407901040A power unit with a two-stroke engine with:an output of 900 W or more, but not more than 1100 W,a cylinder displacement of more than 24 cm3 but not more than 30 cm3,a rotation speed of more than 8400 rpm but not more than 8600 rpm at maximum power,an idling speed of more than 2800 rpm but not more than 3200 rpm, anda fuel tank with a capacity of 0,5 l or more,for use in the manufacture of garden machinery and garden machinery components0 %—31.12.2027
0.4996ex8407909020Compact Liquid Petroleum Gas (LPG) Engine System, with:6 cylinders,an output of 75 kW or more, but not more than 80 kW,inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 84270 %—31.12.2025
0.8300ex84089065ex84089067ex84089081202020Compression-ignition internal combustion piston engines:of the inline type,with a cylinder capacity of 7000 cm3 or more but not more than 18100 cm3,with a power of 205 kW or more but not more than 597 kW,with an exhaust after-treatment module,with external width/height/depth dimensions of not more than 1310/ 1300/1040 mm or 2005/1505/1300 mm or 2005/1505/1800 mm,for use in the manufacture of crushing, screening, separation or compost turning machines0 %—31.12.2026
0.8610ex8409910028Carburetor with:2 mounting holes with a diameter of 31 mm,a choke bore diameter of 18 mm or more, but not more than 19,05 mmfor use in the manufacture of a two-stroke engine grass trimmer0 %—31.12.2028
0.8466ex8409910033Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, with:a weight of 4,0 kg or more but not more than 5,5 kg,a wall thickness of 2,0 mm or more but not more than 6,0 mm,for use in the manufacture of motor vehicle engines0 %p/st31.12.2027
0.8216ex8409910035Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:an operating pressure of not more than 22,5 MPa,solenoid direct injector,analog pressure sensor for not more than 22,5 MPa0 %—31.12.2026
0.8469ex8409910038Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines0 %—31.12.2027
0.7027ex8409910040Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles0 %—31.12.2026
0.7234ex84099100ex840999004570Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles0 %—31.12.2026
0.6752ex84099100ex840999005055Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm0 %p/st31.12.2029
0.7961ex84099100ex848190005560Nozzle body for the regulation of angle and distribution of fuel injection:of a cylindrical shape,made of stainless steel,with 4 or more, but not more than 16 holes,with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute0 %—31.12.2025
0.7965ex8409910075Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:an inlet diameter of 2 mm or more, but not more than 10 mm,an outlet diameter of 2 mm or more, but not more than 10 mm,an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,a plastic covering moulded around a stainless steel tube0 %—31.12.2025
0.7967ex84099100ex848190008070Nozzle needle for opening and closing the flow of fuel in the engine, with:2 holes,4 grooves,a diameter of 3 mm or more, but not more than 6 mm,a length of 25 mm or more, but not more than 35 mm,made of stainless steel with hard-chrome plating0 %—31.12.2025
0.5199ex84099900ex847990701085Injectors with solenoid valve for optimised atomisation in the engine combustion chamber0 %p/st31.12.2026
0.7667ex8409990035The exhaust gas recirculation assembly consisting of:a control unit,an air throttle,an intake pipe,an outlet hose,for use in the manufacture of compression-ignition combustion engines of motor vehicles0 %—31.12.2029
0.7718ex8409990075High pressure fuel rail of galvanised ferrite-pearlite steel with:at least one pressure sensor and one valve,a length of 314 mm or more but not more than 322 mm,an operating pressure not more than 225 MPa,an inlet temperature not more than 95 oC,ambient temperature of – 45 oC or more but not more than 145 oC,for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2029
0.6751ex8411990020Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,with a heat-resistance of not more than 1100 oC,with a diameter of 28 mm or more, but not more than 180 mm,with a height of 20 mm or more, but not more than 150 mm0 %p/st31.12.2027
0.7225ex8411990030Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm0 %p/st31.12.2026
0.5975ex8412390020Actuator for a single-stage turbocharger, with:a pressure inlet pipe and a control rod with a working stroke of 15 mm or more but not more than 40 mm,a maximum length of the actuator including control rod of not more than 400 mm,a maximum diameter of the can at the widest point of not more than 140 mm, anda maximum height of the can without control rod of not more than 140 mm0 %p/st31.12.2029
0.8148ex8412908020Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:a length of 3,5 m or more but not more than 4,5 m,a width of 2 m or more but not more than 4,2 m,a height of 1 m or more, but not more than 1,3 m,a weight of 11 tons or more but not more than 21,5 tons,mounting bores for yawdrive,a mounting flange for gearbox support,drivetrain mount,different screw sockets0 %p/st31.12.2027
0.8079ex8412908030Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:a diameter of 2 m or more, but not more than 5 m,a weight of 2 tons or more but not more than 7 tons0 %p/st31.12.2025
0.7161ex8413302030Single-cylinder radial-piston high pressure pump for gasoline direct injection with:an operating pressure of 200 bar or more, but not more than 350 bar,a flow control, anda pressure relief valve,for use in the manufacture of engines of motor vehicles0 %—31.12.2026
0.7969ex8413302040High-pressure plunger pump for direct diesel injection, with:an operating pressure of not more than 275 MPa,a camshaft,a fluid discharging of 15 cm3 per minute or more, but not more than 1800 cm3 per minute,an electric pressure regulating valve0 %—31.12.2025
0.7970ex8413302050High-pressure plunger pump for direct diesel injection:with an operating pressure of not more than 275 MPa,designed to contact the crankshaft,with an electromagnetic valve0 %—31.12.2025
0.8215ex8413302060High-pressure plunger pump for direct petrol injection:with an operating pressure of not more than 90 MPa,designed to contact the crankshaft,with an electromagnetic valve0 %—31.12.2026
0.8332ex8413308020Electric water pump ensuring the functionality of the water circuit also when the motor is temporarily switched off, for operating DC voltage of 9 V or more but not more than 16 V, with:capacity - pressure 0,075 MPa at 3800 rpm,discharge of 12 l/min,whether or not with connecting cable with connector, andmounting bracket,for use in the manufacture of goods of Chapter 870 %—31.12.2027
0.8185ex8413705120Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with:a discharge outlet diameter of 20 mm or more,9 slots stator,6 pole rotor,rated power of 95 W,volute with straight outlet,rotor chamber without sand filter0 %—31.12.2026
0.8186ex8413705130Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with:a discharge outlet diameter of 20 mm or more,9 slots stator,6 pole rotor,rated power of 95 W,volute with clamped rubber hose outlet,rotor chamber without sand filter0 %—31.12.2026
0.8187ex8413705140Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft, monobloc with the motor, volute with integrated heater, with:a discharge outlet diameter of 20 mm or more,9 slots square or chain pole stator,6 pole rotor,ferritic or rare earth magnets,rated power of 95 W or 80 W,heater of nominal power of 1800 W and soldered or laser welded safety, devices,volute with or without clamped rubber outlet,rotor chamber with ultrasonic welded sand filter0 %—31.12.2026
0.6346ex8413910030Fuel pump cover:consisting of aluminium alloys,with a diameter of 38 mm or 50 mm,with two concentric, annular grooves formed on its surface,anodized,of a kind used in motor vehicles with petrol engines0 %p/st31.12.2029
0.7669ex8414102530Tandem pump consisting of:an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1000 revolutions per minute,vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of – 666 mbar in 6 seconds at 750 revolutions per minutefor use in the manufacture of engines of motor vehicles0 %—31.12.2029
0.4727ex8414308150Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment0 %—31.12.2029
0.6160ex84143081ex841480736030Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:driven by "on-off" single phase alternate current (AC) or "brushless direct current" (BLDC) variable speed motors,with a nominal power rating of not more than 1,5 kW,a rated voltage of 100 V or more but not more than 240 V,with a height of not more than 300 mm,an external diameter of not more than 150 mm,with a unit weight of not more than 15 kg,for use in the manufacture of heat pumps for household appliances, including clothes dryers0 %—31.12.2029
0.2593ex8414308920Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW0 %—31.12.2029
0.8651ex8414592550Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air witha direct current operating voltage of more than 10 V but not more than 14 V, oran alternating current operating voltage of more than 185 V, but not more than 254 V,an operating temperature of – 40 oC or higher, but not higher than 70 oC,for use in the manufacture of heat pump tumble dryers and refrigerators or freezers0 %—31.12.2028
0.7595ex8414593520Radial fan, with:a dimension of 25mm (height) x 85mm (width) x 85mm (depth),a weight of 120 g,a rated voltage of 13,6 VDC (direct current voltage),an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),a rated current of 1,1 A (TYP),a rated power of 15 W,a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow),an air flow of not more than 17,5 litre/s,an air pressure of not more than16 mm H2O ≈ 157 Pa,an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), andwith a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems0 %—31.12.2029
0.8207ex8414593530Electric blower for cooling the high-voltage battery of a hybrid passenger car with:a control unit,MOSFET inverter,a voltage of 9 V or more but not more than 16 V,ambient temperature of – 40 oC or more, but not more than 80 oC,for use in the manufacture of hybrid passenger cars0 %—31.12.2026
0.8648ex8414593540Electric blower for cooling the battery module:with an operating voltage of 9 VDC or more but not more than 16 VDC,with a centrifugal electric fan,with a connector,with a plastic case,with or without a control unit for the fan electric motor,for use in the production of rechargeable batteries for hybrid and electric vehicles0 %—31.12.2028
0.7317ex8414802220Air membrane compressor with:a flow of 4,5 l/min or more, but not more than 12 l/min,power input of not more than 14 W, anda gauge pressure capacity not exceeding 400 hPa (0,4 bar),of a kind used in the production of motor vehicle seats0 %—31.12.2027
0.8133ex8414807350Hermetic heat pump compressor for R450A or R290 refrigerants:not charged with refrigerant,pre-charged with lubricant oil,with a single phase induction permanent split capacitor motor or a DC brushless motor,having suction and/or discharge connections,with a displacement of 8,05 cm3 or more, but not more than 55 cm3,running at 900 rpm or more, but not more than 7800 rpm, andwith a cooling capacity of 920 W or more, but not more than 10440 W in ASHRAE conditions0 %—31.12.2025
0.8483ex8414900015Fan assembly made of aluminium and magnesium alloy:with an outer diameter of 54 mm or more but not more than 130 mm,with a height of 8 mm or more but not more than 30 mm,with two discs connected by blades of involute shape,with or without dowel, and with or without washer,for use in the manufacture of electromotors0 %—31.12.2027
0.2507ex8414900020Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles0 %p/st31.12.2029
0.8494ex8414900025Scroll type compressor housing of an aluminium alloy of a kind with:a heat resistance of 200 oC or more but not more than 250 oC,one or more fixing points suitable for mounting an actuator,for use in the manufacture of turbochargers0 %—31.12.2027
0.8792ex8414900035Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with:a width of 115 mm or more but not more than 160 mm,a length of 115 mm or more but not more than 170 mm,a height of 30 mm or more but not more than 100 mm,a piece of pressure branch with pipe connection,one or two mounting holes andmore than one overflowing hole0 %—31.12.2029
0.8465ex8415900015Electrically welded manifolds for the condenser in automotive air conditioning systems:consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding,containing internal baffles responsible for the proper flow of coolant,with a length of 190 mm or more, but not more than 460 mm,with a diameter of 9 mm or more, but not more than 42 mm,with a weight of 0,01 kg or more, but not more than 0,45 kg,whether or not having aluminium connection blocks,used in the production of air conditioning systems in vehicles of Chapter 870 %p/st31.12.2027
0.6842ex8415900060Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,a weight of 0,02 kg or more but not more than 0,25 kg0 %p/st31.12.2025
0.8679ex8417805010Pre-assembled process module unit of an ethane cracker unit, exceeding 29 meters in length, 35 meters in width and 66 meters in height and 5500 metric ton in weight, containing two steam-cracking non-electric furnaces for de-hydrogenation as a part of an ethane cracker plant consisting of a radiation section and a convection section to produce ethylene and propylene from ethane0 %—30.06.2025
0.7996ex8418999020Aluminium connecting block for connecting to a condenser manifold in welding process:hardened to T6 or T5 temper,with a weight of not more than 150 g,with a length of 20 mm or more but not more than 150 mm,with a fixing rail in one piece0 %p/st31.12.2025
0.8004ex8418999030Receiver dryer profile for connecting to a condenser manifold in welding process with:a braze flatness of not more than 0,2 mm,a weight of 100 g or more but not more than 600 g,a fixing rail in one piece0 %p/st31.12.2025
0.8669ex8419400010Pre-assembled process module unit of an ethane cracker unit, containing:quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water,a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module),a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water,an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module),a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), anda chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module)0 %—30.06.2025
0.8680ex8419508020Pre-assembled process module unit of an ethane cracker unit, containing:an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor,pumps and a heat exchanger to deliver ethylene to an external pipeline, anda closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor0 %—30.06.2025
0.8747ex8419508030Aluminium heat exchanger for gas boilers designed for heat transfer:with a height of 100 mm or more, but not more than 120 mm,with a width of 235 mm, but not more than 280 mm,with a length of 250 mm or more, but not more than 280 mm,for a power output of 25 kW or more, but not more than 35 kW,with a weight of 8 kg or more, but not more than 10 kg0 %—31.12.2029
0.8675ex8419899810Pre-assembled process module unit of an ethane cracker unit, containing:equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected equipment containing:coolers,vapor-liquid separation drums, andpumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products,equipment associated with an external caustic wash tower containing:caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas,a spent caustic pre-treatment system, containing separation drums, pumps and mixers,a heat exchanger for the pre-cooling of cracked gas, anda separation drum for the removal of water from cracker gas0 %—30.06.2025
0.6193ex8431200040Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 84270 %p/st31.12.2029
0.6821ex8436990010Part containing:a single-phase AC motor,an epicyclic gearing,a cutter blade,and whether or not containing:a capacitor,a part fitted with a threaded bolt,for use in the manufacture of garden shredders0 %p/st31.12.2025
0.3374ex8439990010Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more0 %p/st31.12.2029
0.8632ex8467990010Pole hedge trimmer cutting elements:in the form of hedge trimmer attachment,with a knife length of 60 cm and teeth opening of 30 mm,with angle adjustment of the blade,with integrated single stage gearbox,with a magnesium cast body,for use in the manufacture of garden machinery and power tools0 %—31.12.2028
0.2599ex8477809910Machines for casting or for surface modification of plastic membranes of heading 39210 %p/st31.12.2029
0.8123ex8479899728Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:electronic brake assistants,hydraulic unit driven by brushless electric motor,brake fluid reservoir,for use in the manufacture of hybrid passenger cars0 %—31.12.2025
0.8673ex8479899733Pre-assembled process module unit of an ethane cracker unit, containing:various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums,a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream,a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit),associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, anda vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers0 %—30.06.2025
0.8206ex84798997ex850131003868Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:a length of 110 mm or more but not more than 140 mm,a width of 90 mm or more but not more than 130 mm,a height of 80 mm or more but not more than 110 mmfor use in the manufacture of engines of motor vehicles0 %—31.12.2026
0.8681ex8479899743Pre-assembled process module unit of an ethane cracker unit, containing:a system for filtering and cooling of dried cracked gas,a deethanizer distillation column and associated equipment for C2–/C3+ separation,an acetylene hydrogenation system to remove acetylene within a C2 stream,a fuel gas drum that stores fuel gas for cracker furnaces, anda system to regenerate dryers in a cracker installation0 %—30.06.2025
0.6230ex8479899760Bioreactor for biopharmaceutical cell culturehaving interior surfaces of austenitic stainless steel, andwith a process capacity up to 15000 litres,whether or not combined with a "clean-in-process" system and/or a dedicated paired media hold vessel0 %p/st31.12.2026
0.7964ex8479907040Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:of a circular shape,made of steel alloy with sintering process,with not more than 8 oil chambers,with a Rockwell hardness of 55 or more,with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm30 %—31.12.2025
0.7962ex8479907050Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:with 4 blades that end in grooves,made of steel alloy with sintering process0 %—31.12.2025
0.7424ex8481109940Pressure reducing valves in a brass case with:a length of not more than 30 mm (± 1 mm),a width of not more than 18 mm (± 1 mm),of a kind used for incorporation in fuel delivery modules of motor vehicles0 %—31.12.2027
0.7968ex84813091ex848130993050Mechanical check (non-return) valve for opening and closing of the flow of fuel:with an operating pressure of not more than 250 MPa,with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,made of steel0 %—31.12.2025
0.4668ex8481309191Steel check (non-return) valves with:an opening pressure of not more than 800 kPa,an external diameter not more than 37 mm0 %p/st31.12.2029
0.7155ex8481805920Pressure regulating valve for incorporation into compressors of motor vehicle air condition units0 %p/st31.12.2026
0.7380ex8481805930Two-way flow control valve with housing, with:at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,at least 330 cm3/minute, but not more than 5000 cm3/minute flow rate,at least 19, but not more than 300 MPa operating pressure0 %—31.12.2029
0.7377ex8481805940Flow-control valve:made of steel,with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,with chromium nitride coating,with a surface roughness of Rp 0,40 %—31.12.2027
0.7381ex8481805950Electromagnetic valve for quantity control with:a plunger,a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm0 %—31.12.2027
0.7382ex8481805960Electromagnetic valve for quantity controlwith a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH0 %—31.12.2027
0.7960ex84818059ex848190007080Flow-control valvemade of steel,with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm0 %—31.12.2025
0.5575ex8481806960Four-way reversing valve for refrigerants, consisting of:a solenoid pilot valvea brass valve body including valve slider and copper connectionswith a working pressure up to 4,5 MPa0 %p/st31.12.2027
0.7519ex84818073ex848180992070Pressure- and flow-control valve controlled by external electromagnet:made of steel and/or steel alloy(s),without integrated circuit,of not more than 1000 kPa operating pressure,with a flow quantity of not more than 5 l/min,without an electromagnet0 %—31.12.2029
0.8752ex8481809980Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load:in metal cover,with electrical connector,with a force of not more than 10 N,with an operating voltage of 9 VDC or more but not more than 16 VDC,with a length of 80 mm or more but not more than 110 mm,with a width of 80 mm or more but not more than 110 mm,with a height of 20 mm or more but not more than 30 mm,for use in the manufacture of engines of motor vehicles0 %—31.12.2029
0.7735ex8482101015Ball bearings with:an internal diameter of 4 mm or more but not more than 9 mm,an external diameter of not more than 26 mm,a width of not more than 8 mm,for use in the manufacture of electromotors with a range of 40000 rpm or more but not more than 80000 rpm0 %—31.12.2029
0.8098ex8482500020Axial roller bearing made of steel:the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,the rollers are made of anti-friction steel according to ASTM 295-94,with an external diameter of 63 mm or more but not more than 66 mm,with an internal diameter of 44 mm or more but not more than 46 mm,with a weight of 23 g or more but not more than 27 g,with 36 rollers or more but not more than 38 rollers0 %p/st31.12.2025
0.8588ex8483109530Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with:external toothing in a diametral pitch standard,17 teeth or more, but not more than 50 teeth,a diameter of 35 mm or more, but not more than 145 mm,a length of 200 mm or more, but not more than 1345 mm,a hardness of 35 HRC or more, but not more than 45 HRC0 %—31.12.2028
0.8746ex8483109540Stepped shaft made of carbon steel with:rolled, involute profiled, splined shaft end, the helix angle of which is at least 0o15,5′ but not more than 0o 21,5′,a largest diameter of 16 mm or more, but not more than 18 mm,a length of 137 mm or more, but not more than 155 mm,a weight of 0,12 kg or more, but not more than 0,28 kg0 %—31.12.2029
0.5744ex84833032ex848330383060Bearing housing of a kind used in turbochargers:of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,with oil chambers,without bearings,with a diameter of 50 mm or more, but not more than 250 mm,with a height of 40 mm or more, but not more than 150 mm,whether or not with water chambers and connectors0 %p/st31.12.2027
0.8626ex8483402320Bevel gear:made of lightweight alloys and steel,built on straight or helical bevel gears,with an angle between the shafts of 30 degrees or more but not more than 90 degreeswith a gear 1:1,3 ratio or more but not more than 1:1,46,for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery0 %—31.12.2028
0.8625ex8483402330Bevel gear:made of lightweight alloys and steel,built on straight bevel gears,with an angle between the shafts of 24 degrees or more but not more than 35 degrees,for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery0 %—31.12.2028
0.8303ex8483402520Worm gearbox:in an aluminium alloy housing,with a plastic or steel worm,with mounting holes,with a 90 degree reversible drive direction,with a 4:19 transmission ratio,equipped with a lead screw with a length of 310 mm or more but not more than 380 mm,with a guide nut incorporated into the assembly bracket,with or without a lead screw support,for indirect connection to the drive motor of a car seat guide system0 %—31.12.2026
0.5202ex8483402950Gear set of cycloid gear type with:a rated torque of 50 Nm or more but not more than 9000 Nm,standard ratios of 1:50 or more but not more than 1:475,lost motion of not more than one arc minute,an efficiency of more than 80 %of a kind used in robot arms0 %p/st31.12.2026
0.5977ex8483402960Epicyclic gearing, of a kind used in driving hand-held power tools with:a rated torque of 25 Nm or more, but not more than 70 Nm,standard gear ratios of 1:12.7 or more, but not more than 1:64.30 %p/st31.12.2029
0.8585ex8483402970Cast steel planetary cage, with:external or internal toothing in a diametral pitch standard,27 teeth or more, but not more than 70 teeth,a diameter of 300 mm or more, but not more than 725 mm,a length of 225 mm or more, but not more than 800 mm,3 or 4 planetary gears,a hardness of 40 HRC or more, but not more than 45 HRC0 %—31.12.2028
0.7920ex8483405930Hydrostatic speed changer:with a hydro pump and a differential with wheel axle,whether or not with a fan impeller and/or a pulley,for use in the manufacture of lawn mowers of subheadings 843311 and 843319 or other mowers of subheading 8433200 %p/st31.12.2029
0.4997ex8483409080Transmission gearbox, with:not more than 3 gears,an automatic deceleration system, anda power reversal system,for use in the manufacture of goods of heading 84270 %p/st31.12.2025
0.8100ex8483508020Pulley blocks of non-cast steel:made of structural carbon steel complying with standard JIS G4051,with an external diameter of 104 mm or more but not more than 142 mm,with an internal diameter of 33 mm or more but not more than 37 mm,with a width of 22 mm or more but not more than 40 mm,with a weight of 0,4 kg or more but not more than 1,6 kg,with 6 trapezoidal grooves0 %p/st31.12.2025
0.8540ex8483508030Mechanical tensioner for maintaining the tension of the drive belts of a passenger car engine:with two pulleys made of polyamide, each of them with a diameter of 50 mm or more but not more than 70 mm,with a spring made of a steel alloy containing chromium and silicon,with two arms made of aluminum,with a holder made of aluminum,for use in the manufacture of motor vehicle engines0 %—31.12.2028
0.8209ex8483908920Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with:case,rotor,at least 4 screws,spring,of an external diameter of 80 mm or more but not exceeding 95 mm,of a thickness of 25 mm or more but not more than 35 mm,for use in the manufacture of engines of motor vehicles0 %—31.12.2026
0.8584ex8483908930Forged steel sprockets with external toothing, whether or not with internal splines in a diametral pitch standard, with:a diameter of 400 mm or more, but not more than 630 mm,7 teeth or more, but not more than 15 teeth,a tooth core hardness of 28 HRC or more, but not more than 45 HRC,a tooth surface hardness of 50 HRC or more, but not more than 60 HRC,whether or not, a spline hardness of 30 HRC or more, but not more than 45 HRC,an effective carburized case depth of 4 mm or more, but not more than 5 mm0 %—31.12.2028
0.8541ex8483908940Steel alloy gear wheels with straight teeth and involute profile, with:external and/or internal toothing in a diametral pitch standard,a diameter of 35 mm or more, but not more than 600 mm,13 teeth or more, but not more than 80 teeth,a tooth core hardness of 28 HRC or more, but not more than 45 HRC,a tooth surface hardness of 50 HRC or more, but not more than 65 HRC,an effective carburized case depth of 1,00 mm or more, but not more than 3,1 mm,a spline hardness of 27 HRC or more, but not more than 62 HRC,whether or not in combination with a shaft with a spline hardness of 27 HRC or more, but not more than 62 HRC0 %—31.12.2028
0.7156ex8484200010Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units0 %p/st31.12.2026
0.6854ex8501101020Synchronous motor for a dishwasher with a water flow control mechanism witha length without axle of 24 mm (±0,3),a diameter of 49,3 mm (±0,3),a rated voltage of 220 V AC or more but not more than 240 V AC,a rated frequency of 50 Hz or more but not more than 60 Hz,an input power of not more than 4 W,a rotation speed of 4 rpm or more but not more than 4,8 rpm,an output torque of not less than 10 kgf/cm0 %—31.12.2027
0.7857ex8501101040Synchronous hybrid stepper motor with:an output not exceeding 18 W,two phases,a rated current of not more than 2,5 A/phase,a rated voltage of not more than 20 V,with or without a threaded shaft,for use in the manufacture of 3D printers0 %—31.12.2029
0.8390ex85011010ex850110995030Linear actuator for automotive electric seat adjustment applications:consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew,whether brushed or brushless,whether or not with electronic control unit,whether or not with Hall Effect Sensor,with a nominal voltage of 8 V or higher but not higher than 16 V,with a rated output mechanical power not exceeding 20 W, andwith a specified temperature range from – 40 oC to 160 oC,for use in the manufacture of automotive components for car seats0 %—31.12.2027
0.8389ex85011010ex850110996040Rotary actuator for automotive electric seat adjustment applications:consisting of a permanently excited DC motor with an integrated gear mechanism,whether brushed or brushless,whether or not with electronic control unit,whether or not with Hall Effect Sensor,with a nominal voltage of 8 V or more but not more than 16 V,with a rated output mechanical power not exceeding 35 W, andwith a specified temperature range from – 40 oC to 160 oC,for use in the manufacture of automotive components for car seats0 %—31.12.2027
0.8539ex8501101070Electric controller for blinds of cooler, with an operating DC voltage of 9 V or more but not more than 16 V and a maximum power of less than 18 W, containing at least:a printed circuit board,an electric stepper motor,a connector,a plastic cover,for use in the manufacture of goods of Chapter 870 %—31.12.2028
0.8394ex8501109920Worm axis motor for automotive electric seat adjustment applications:consisting of a permanently excited DC motor with a worm wheel,whether brushed or brushless,whether or not with electronic control unit,whether or not with Hall Effect Sensor,with a nominal voltage of 8 V or more but not more than 16 V,with a rated output mechanical power not exceeding 35 W, andwith a specified temperature range from – 40 oC to 160 oC,for use in the manufacture of automotive components for car seats0 %—31.12.2027
0.8396ex8501109950Electric (DC) motor powering height adjusting with:a rated output mechanical power not exceeding 35 W,frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,a stall torque of 45 Nm and ultimate torque of 200 Nm,a maximum current of 15 A,no load speed of 7 RPM or more but not more than 10 RPM,a rotation speed of 4000 RPM or more but not more than 5600 RPM,a maximum noise level of 42 dB(A),a maximum angular backlash up to 3 degrees, anda 8 tooth pinion module,for use in the manufacture of automotive components for car seats0 %—31.12.2027
0.7197ex8501109956DC Motor:with a speed rotation of not more than 7000 rpm without load,with a nominal voltage of not more than 18 V,with a maximum power of 24 W,for a specific temperature range from – 40 oC to 160 oC,with or without a gear connection,with or without a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 100 Nm0 %—31.12.2026
0.7198ex8501109958DC Motor:with a speed rotation of not more than 6500 rpm (without load),with a nominal voltage of 12 V (± 4 V),with a maximal power below than 20 W,with a specified temperature range from – 40 oC to 160 oC,with a worm gear drive,with a mechanical attachment interface,with 2 electrical connections,with a maximum torque of 75 Nm0 %—31.12.2026
0.5846ex8501109960DC motor:with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loadedwith a power supply voltage of 100 V or more but not more than 240 Vfor use in the manufacture of electric fryers0 %—31.12.2027
0.6858ex8501109964DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:with Ingress Protection (IP) standard of IP69,with a rotor speed of not more than 6500 rpm when not loaded,with a rated voltage of 12,0 V (±0,1),of a specified temperature range of – 40 oC or more but not more than + 165 oC,with or without a connecting pinion,with or without an engine connector,with or without a flange,with a diameter of not more than 40 mm (not including the flange),with an overall height of not more than 90 mm (from the base to the pinion)0 %—31.12.2026
0.6880ex8501109965Electric turbocharger actuator, with:a DC motor,an integrated gear mechanism,a (pulling)force of 200 N or more at a minimum of 140 oC elevated ambient temperature,a (pulling) force of 250 N or more in each position of its stroke,an effective stroke of 15 mm or more but not more than 25 mm,with or without an on-board diagnostics interface0 %—31.12.2025
0.6115ex8501109970DC stepping motor, with:a two-phase winding,a rated voltage of 9 V or more, but not more than 16,0 V,of a specified temperature range of – 40 oC or more but not more than + 105 oC,with or without connection pinion,with or without motor drive connector0 %—31.12.2029
0.6627ex8501109975Permanently excited DC motor witha multiple-phase winding,an external diameter of 24 mm or more but not more than 38 mm,a rated speed of not more than 12000 rpm,a power supply voltage of 8 V or more but not more than 27 V,with or without a pulley,with or without a gear wheel0 %—31.12.2025
0.2838ex8501109979DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20 oC to + 70 oC0 %—31.12.2029
0.8345ex8501200050Universal AC/DC motor, rotating:with a nominal supply voltage of 230 V,with a power of more than 37,5 W but not more than 2000 W,with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, andwith or without a worm gear, gears or a gearbox,for the production of a torque to a transmission shaft for small domestic appliances0 %—31.12.2027
0.8349ex8501200060Universal AC/DC motor, rotating:with a nominal supply voltage of 230 V,with a power of more than 37,5 W but not more than 1200 W,with a stator cross-section of 65 mm or more but not more than 75 mm and a thickness of 15 mm or more but not more than 45 mm, andwith or without a worm gear, gears or a gearbox,for the production of a torque to a transmission shaft for small domestic appliances0 %—31.12.2027
0.8367ex8501200070Universal AC/DC motor, rotating:with a nominal supply voltage of 230 V,with a power of more than 37,5 W but not more than 700 W,with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, andwith or without a worm gear, gears or a gearbox,for the production of a torque to a transmission shaft for small domestic appliances0 %—31.12.2027
0.5954ex8501310045DC motors, brushless, with:an external diameter of 90 mm or more, but not more than 110 mm,a rated speed of not more than 3680 rpm,an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 oC,a supply voltage of 12 V,a torque of not more than 5,67 Nm,a rotor position sensor,an electronic star-point relay, andfor use with an electric power steering control module0 %—31.12.2029
0.8395ex8501310047Motor for automotive electric seat adjustment applications:with a shaft output on both motor sides,consisting of a permanently excited DC motor,whether brushed or brushless,whether or not with electronic control unit,whether or not with Hall Effect Sensor,with a nominal voltage of 8 V or more but not more than 16 V,with a rated output mechanical power not exceeding 120 W, andwith a specified temperature range from – 40 oC to 160 oC,for use in the manufacture of automotive components for car’s seats0 %—31.12.2027
0.8609ex8501310048Brushless DC electric motors:with a rated power of 240 W or more, but not more than 260 W,with a voltage of 36 V or higher, but not higher than 52 Vwith a torque of 20 Nm or more, but not more than 140 Nm,with a housing made of aluminum, aluminum alloy or plastic,with or without a built-in controller,with a communication function in the LIN or UART interface,weighing 1,5 kg or more, but not more than 5,0 kg,adapted for mounting in a bicycle framefor use in the manufacture of e-bikes0 %—31.12.2028
0.8608ex8501310049Brushless DC electric motors:with a rated power of 240 W or more, but not more than 260 W,with a voltage of 24 V or higher, but not higher than 52 V,with a torque of 30 Nm or more, but not more than 62 Nm,with a LIN, UART or CAN communication interface,with an internal planetary gearbox with fixed or variable ratio or direct drive,with a housing made of aluminum or aluminium alloy,with a weight of 1,5 kg or more, but not more than 6 kg,adapted for mounting in the front or rear bicycle wheel,for use in the manufacture of e-bikes0 %—31.12.2028
0.5577ex8501310050DC motors, brushless, with:an external diameter of 80 mm or more, but not more than 200 mm,a supply voltage of 4V or more, but not more than 16 V,an output at 20 oC of 200 W or more, but not more than 750 W,a torque at 20 oC of 2,00 Nm or more, but not more than 7,00 Nm,a rated speed at 20 oC of 600 rpm or more, but not more than 3100 rpm,with or without a pulley,with or without an electronic power steering sensor/controller0 %—31.12.2027
0.5978ex85013100ex850132005540DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:an external diameter of 24,2 mm or more, but not more than 140 mm,a rated speed of 3300 rpm or more, but not more than 26200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of more than 37,5 W, but not more than 2400 W,a free load current of not more than 20,1 A,a maximum efficiency of 50 % or more,0 %—31.12.2029
0.4731ex8501310058Permanently excited DC motor with:an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,a rated speed of not more than 25000 rpm,an output of 45 W or more but not more than 400 W, anda supply voltage of 9 V or more but not more than 50 V,whether or not a multiple-phase winding,whether or not with a drive disc,whether or not with a crankcase,whether or not with a fan,whether or not with a cap assembly,whether or not with a sun gear,whether or not with a speed and rotational direction encoder,whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,whether or not with a mounting flangefor use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture0 %—31.12.2029
0.6809ex85013100ex850132006365Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:a specified speed of not more than 4100 rpm,a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with a minimum output of 750 W but not more than 1,55 kW (at 36 V),a flange diameter of 85 mm or more but not more than 200 mm,a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,a housing length of not more than 265 mm, measured from the flange to the outer ending,a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, andsurface magnets,whether or not with electronic power steering controller,whether or not with pulley,whether or not with rotor position sensor0 %—31.12.2025
0.4855ex85013300ex85014080ex85015350305010Electric drive for motor vehicles, with an output of not more than 315 kW:with an AC or DC motor with or without transmission,with or without power electronics0 %—31.12.2026
0.8188ex8501402035Electric AC motor, single-phase, with:a rated power of 120 W or more but not more than 150 W,an input power of 280 W or more but not more than 350 W,an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm,a rated speed of 2680 rpm or more but not more than 3000 rpm,a weight of 4,2 kg or more but not more than 4,6 kg,pulleys, a spindle and a tachometer,for use in the manufacture of home appliance products0 %—31.12.2026
0.8189ex8501402045Electric AC motor, single-phase, with:a rated power of 275 W or more, but not more than 325 W,an input power of 600 W or more but not more than 700 W,an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,a rated speed of 15000 rpm or more but not more than 20000 rpm,a weight of 4,2 kg or more,a pulley and a tachometer,for use in the manufacture of home appliance products0 %—31.12.2026
0.8191ex8501402050Electric AC motor, single-phase, with:a rated power of 300 W or more but not more than 370 W,an input power of 600 W or more but not more than 700 W,an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,a rated speed of 15000 rpm or more but not more than 19000 rpm,a weight of 4,8 kg or more,a pulley,for use in the manufacture of home appliance products0 %—31.12.2026
0.8192ex8501402055Electric AC motor, single-phase, with:a rated power of 275 W or more, but not more than 325 W,an input power of 600 W or more but not more than 700 W,an external diameter without bracket and connector of 160 mm or more but not more than 180 mm,a rated speed of 15000 rpm or more but not more than 19000 rpm,a weight of not more than 4,4 kg,a pulley,for use in the manufacture of home appliance products0 %—31.12.2026
0.8193ex8501402060Electric AC motor, single-phase, with:a rated power of 275 W or more but not more than 325 W,an output power of 550 W or more but not more than 600 W,an input power of 800 W or more but not more than 1000 W,an external diameter of more than 150 mm but not more than 170 mm without the bracket,a rated speed of more than 16000 rpm but not more than 18000 rpm,a weight of 3,4 kg or more but not more than 3,7 kg,a pulley,for use in the manufacture of home appliance products0 %—31.12.2026
0.5329ex85015100ex850152203050AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with:an output of 340 W or more but not more than 7,4 kW,a flange of dimensions of not more than 180 mm × 180 mm, anda length from flange to extreme end of resolver of not more than 271 mm0 %—31.12.2026
0.8190ex8501510040Electric AC motor, three-phase, with:a rated power of 280 W or more but not more than 320 W,an output power of 480 W or more but not more than 540 W,an input power of 800 W or more but not more than 900 W,an external diameter of 150 mm or more but not more than 170 mm,a rated speed of 15000 rpm or more but not more than 20000 rpm,a weight of 6 kg or more but not more than 6,4 kg,a pulley and a tachometer,for use in the manufacture of home appliance products0 %—31.12.2026
0.8404ex8501510050Three phase AC synchronous brushless permanent magnet motor with:an output of 500 W or more but not more than 700 W,an external diameter of 129,7 mm or more but not more than 180,3 mm,a rated speed of 16000 rpm or more but not more than 17000 rpm,a weight of 2,5 kg or more but not more than 3,1 kg, andwith a pulley,for use in the manufacture of home appliance products0 %—31.12.2027
0.8590ex85015100ex850152206060Automotive-ready brushless permanently excited magnet synchronous AC-motor witha specified speed of not more than 7000 rpm,a power rating of 400 W or more but not more than 1,8 kW (at 12 V),a flange diameter of 80 mm or more, but not more than 200 mm,a maximum length of not more than 220 mm, measured from the beginning of the shaft to its outer end,a housing length of not more than 180 mm, measured from the flange to the outer end,a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface),a stator with single T-tooth design and single coil winding with 12/10 or 12/8 topology and surface magnets0 %—31.12.2028
0.8129ex8501535030Permanent magnet synchronous traction motor, with:a continuous power of 110 kW or more but not more than 180 kW,a liquid cooled system,a total length of 500 mm or more but not more than 650 mm,a total width of 600 mm or more but not more than 700 mm,a total height of 550 mm or more but not more than 650 mm,weighing of not more than 350 kg,3 suspension points0 %—31.12.2025
0.8285ex8501535040Permanent magnet traction AC motor, with:a continuous power of 110 kW or more but not more than 150 kW,a liquid cooled system,a total length of 460 mm or more but not more than 590 mm,a total width of 450 mm or more but not more than 580 mm,a total height of 490 mm or more but not more than 590 mm,a weight of not more than 310 kg,4 mounting points0 %—31.12.2026
0.8458ex8501535050Asynchronous traction motor, with:a continuous power of 140 kW or more but not more than 180 kW,a liquid cooled system,a total length of 580 mm or more but not more than 730 mm,a total width of 550 mm or more but not more than 670 mm,a total height of 510 mm or more but not more than 630 mm,with a weight of not more than 390 kg,with or without reduction gear,with or without starter generator,2 mounting points,for use in the manufacture of the electric drive of hybrid buses0 %—31.12.2027
0.8130ex8501620040AC, 3-phase generator, with:a continuous power of 147 kVA or more but not more than 222 kVA,a continuous torque of 650 Nm or more but not more than 900 Nm,a maximum working speed of 2700 revolutions per minute (rpm),a liquid cooled system,a length of 100 mm or more but not more than 200 mm,a width of 550 mm or more but not more than 650 mm,a height of 550 mm or more but not more than 650 mm,weighing of not more than 150 kg0 %—31.12.2025
0.2837ex85030091ex850300983132Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing0 %p/st31.12.2029
0.4599ex8503009833Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2026
0.7496ex8503009837Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements:diameter of the rotor body of 15 mm or more but not more than 37 mm,length of the rotor body of 12 mm or more but not more than 36 mm0 %—31.12.2029
0.8662ex8503009853Pressure casted rotor cover of the cooling channel system in the electrical motor:of EN AC-47100-F aluminum,with a sealing cap of stainless steel,shot-blasted and machined,leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure,with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506),with a tensile strength of 240 N/mm2 or more,with a height of 50 mm or more, but not more than 55 mm,with a diameter of 109 mm or more, but not more than 112 mm,with a weight of 3,9 kg or more but not more than 4,2 kg0 %—31.12.2028
0.6161ex8503009855Stator for brushless motor, with:an internal diameter of 206,6 mm (±0,5),an external diameter of 265,0 mm (±0,2), anda width of 37,2 mm or more but not more than 47,8 mm,of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums0 %p/st31.12.2026
0.8658ex8503009858Pressure casted inner housing of a cooling channel system for an electrical motor:of EN AC-47100 aluminum,shot-blasted and machined,leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)with a tensile strength of 240 N/mm2 or more,with a height of 225 mm or more, but not more than 280 mm,with a diameter of 300 mm or more, but not more than 310 mm,with a weight of 3,8 kg or more, but not more than 4,9 kg0 %—31.12.2028
0.8659ex8503009863Pressure casted outer housing of an electrical motor:of EN AC-47100 aluminum,with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,shot-blasted and machined,a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)with a tensile strength of 240 N/mm2 or more,with a height of 245 mm or more, but not more than 360 mm,with a width of 360 mm or more, but not more than 525 mm,with a length of 345 mm or more, but not more than 450 mm,with a weight of 6,4 kg or more, but not more than 8,3 kg0 %—31.12.2028
0.8783ex8503009873Pressure die-cast electric motor stator housing:of EN AC-46000 aluminium,shot-blasted and machined,with a height of 70 mm or more but not more than 76 mm,with a width of 155 mm or more but not more than 162 mm,with a weight of 330 g or more but not more than 360 g0 %—31.12.2029
0.7761ex8503009875Stator body of stacked electrical sheet having:an inner diameter of 18 mm or more but not more than 35 mm,an outer diameter of 35 mm or more but not more than 65 mm, anda length of 20 mm or more but not more than 65 mm,whether or not incorporated in a housing0 %—31.12.2029
0.7549ex8504318015Electrical Transformer witha capacity of 192 Watts or 216 Wattsdimensions of not more than 27,1 x 26,6 x 18 mman operating temperature range of – 40 oC or more, but not more than + 125 oCthree or four inductively coupled copper wire windings and9 connection pins at the bottom0 %—31.12.2029
0.4450ex8504318030Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters0 %—31.12.2029
0.7000ex8504318050Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry0 %—31.12.2026
0.7029ex8505111020Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,whether or not arched,whether or not with rounded corners or oblique sides,whether or not colour markedwhether or not coated or passivated with a surface treatment,whether or not consisting of segments bonded together and electrically insulated from one anotherwith:a length of 9 mm or more, but not more than 105 mm,a width of 5 mm or more, but not more than 105 mm,a thickness of 2 mm or more, but not more than 55 mmintended to become permanent magnet after magnetisation0 %—31.12.2026
0.5584ex8505111023Bars in the form of arched rectangles, containing alloy containing neodymium, with:a length of 15 mm or more but not more than 52 mm,a width of 5 mm or more but not more than 42 mm,whether or not coated or passivated with a surface treatment,intended to become permanent magnets after magnetisation0 %p/st31.12.2027
0.5585ex8505111028Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:with an external diameter of not more than 45 mm,with a height of not more than 45 mm,whether or not coated or passivated with a surface treatment,intended to become permanent magnets after magnetisation0 %p/st31.12.2027
0.3740ex8505111030Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:a rectangular or a trapezoidal cross-section,a length of not more than 140 mm,a width of not more than 90 mm anda thickness of not more than 55 mm,or in the shape of an arched rectangle with:a length of not more than 75 mm,a width of not more than 40 mm,a thickness of not more than 7 mm anda radius of curvature of more than 86 mm but not more than 241 mm,layers of nickel and copperor in the shape of a disc with:a diameter of not more than 90 mm,whether or not a hole in the centre0 %p/st31.12.2029
0.5948ex8505111035Article of an alloy of neodymium, in the shape of a disc, with:a diameter of not more than 90 mm,whether or not a hole in the centre,layers of copper, nickel and/or zinc,intended to become permanent magnets after magnetisation0 %—31.12.2029
0.8508ex8505111078Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:a length of 200 mm or more but not more than 205 mm,a width of 58 mm or more but not more than 62 mm,a height of 25 mm or more but not more than 30 mm,with a stud mounted in the middle0 %—31.12.2027
0.5937ex8505199030Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with:a diameter of not more than 120 mm,a hole in the centre,intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT0 %—31.12.2029
0.7299ex8505199045Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with:a length of 26,85 mm or more but not more than 32,15 mm,a width of 7,6 mm or more but not more than 9,55 mm,a thickness of 5,3 mm or more but not more than 5,8 mm, anda weight of 6,1 g or more but not more than 8,3 g,intended to become a permanent magnet after magnetisation0 %p/st31.12.2027
0.7511ex8505199060Articles of agglomerated ferrite in the shape of arched rectangles,whether or not coated or passivated with a surface treatment,whether or not with rounded corners,with:a length of 9 mm or more but not more than 101 mm,a width of 9 mm or more but not more than 101 mm,a thickness of 1,85 mm or more but not more than 15,15 mm,intended to become permanent magnets after magnetisation0 %—31.12.2029
0.4029ex8505200030Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles0 %p/st31.12.2029
0.8627ex8505200040Electromagnetic clutch:transmitting torque from the motor shaft to the cutting device pulley,containing field coil, rotor, hub and armature,with an operating voltage of 12 Va current of 3,93 A current or more but not more than 6,86 A,a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 oC),a static torque of 108 Nm or more but not more than 305 Nmfor use in the manufacture of rider type self-propelled mowers0 %—31.12.2028
0.8095ex8505909020Electromagnetic clutch coil in a cylindrical metal housing:the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,the coil is made of copper wire,with a weight of 0,4 kg or more but not more than 0,85 kg,with a width of 20 mm or more but not more than 45 mm,with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,with an external diameter of 87 mm or more but not more than 110 mm,without plunger,with one connector0 %p/st31.12.2027
0.2490ex8506509010Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V0 %—31.12.2029
0.2488ex8506509030Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah0 %—31.12.2029
0.6685ex8507600015Cylindrical lithium-ion-accumulators or modules with:a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,a nominal voltage of 36 V or more, but not more than 48 V,a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles1,3 %—31.12.2025
0.7663ex8507600018Lithium-ion polymer accumulator pack equipped with a battery management system and can-bus interface with:6 modules with 90 cells or more but not more than 192 cells,a nominal voltage of 280 V or more but not more than 400 V,a nominal capacity of 9,7 Ah or more but not more than 120 Ah,a charging voltage of 110 V or more but not more than 495 V, andin a metal casing with:a length of not more than 1723 mm,a width of not more than 1162,23 mm,a height of not more than 395 mm,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 87031,3 %—31.12.2025
0.8566ex8507600021Cylindrical rechargeable lithium-ion polymer accumulator module with:a cable,a connector,1 or 2 cells,a charge control module or NTC temperature sensor,a fuse,a weight of 37,3 g or more but not more than 91,5 g,a nominal voltage of 3,2 V,a battery capacity of 1100 mAh or more but not more than 2200 mAh,for the manufacture of automatic emergency call devices for passenger cars1,3 %—31.12.2025
0.8593ex8507600024Rechargeable lithium-ion battery, based on lithium-iron-phosphate technology, with:a fuse,a cell-to-pack design,a length of 985 mm or more but not more than 1015 mm,a width of 1050 mm or more but not more than 1070mma height of 145 mm or more but not more than 160 mm,a weight of 220 kg or more but not more than 250 kg,a capacity of 200 Ah or more,a specific energy density of 130 Wh/kg or more,for use in the manufacture of vehicles of subheading 8702401,3 %—31.12.2025
0.8660ex8507600026Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with:a length of 820 mm or more, but not more than 882 mm,a width of 390 mm or more, but not more than 655 mm,a height of 110 mm or more, but not more than 137 mm,a weight of 60 kg or more, but not more than 165 kg, anda power of 11300 Wh or more, but not more than 29360 Wh1,3 %—31.12.2028
0.8645ex8507600028Lithium-ion rechargeable battery cell with:a length of 190 mm or more but not more than 380 mm,a width of 90 mm or more but not more than 150 mm,a height of 4 mm or more but not more than 15 mm,a weight of 0,1 kg or more but not more than 1,2 kg,a nominal voltage of 3,0 VDC or more but not more than 4,0 VDC,a nominal capacity of not more than 90 Ah,for use in the manufacture of rechargeable hybrid and electric vehicle batteries1,3 %—31.12.2025
0.8368ex8507600029Lithium-ion rechargeable battery pack in a specific housing, suitable for use in digital still cameras, having:a length of 50 mm or more, but not more than 120 mm,a width of 35 mm or more, but not more than 80 mm,a height of 15 mm or more, but not more than 45 mm,a weight of 0,040 kg or more but not more than 0,085 kg; anda capacity of not more than 2200 mAh1,3 %—31.12.2025
0.2907ex8507600030Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries1,3 %—31.12.2025
0.6703ex8507600033Lithium-ion battery module or accumulator, with:a length of 150 mm or more, but not more than 1310 mm,a width of 100 mm or more, but not more than 1000 mm,a height of 200 mm or more, but not more than 1500 mm,a weight of 50 kg or more, but not more than 200 kg,cells of a nominal capacity of 58 Ah or more but not more than 500 Ah,a nominal output voltage of 230 V AC or 45 V or more but not more than 980 V DC1,3 %—31.12.2025
0.8654ex8507600036Lithium-ion accumulator, withmultiple connected lithium-ion accumulator cells,charging and monitoring electronics,a power of 74 Wh or more, but not more than 75 Wh,in a plastic housing with electrical connection contacts and LCD display,for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor1,3 %—31.12.2025
0.5548ex8507600038Modules for the assembly of lithium-ion battery packs, with:a length of 298 mm or more, but not more than 500 mm,a width of 33,5 mm or more, but not more than 209 mm,a height of 75 mm or more, but not more than 228 mm,a weight of 3,6 kg or more, but not more than 17 kg,a power of 458 Wh or more, but not more than 3510 Wh, anda voltage of less than 45 V or more than 70 V1,3 %—31.12.2025
0.8115ex8507600048Integrated battery system in a metal case with holders, consisting of:a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,Battery Management System,a power relay,a cooling system,four connectors,for use in the manufacture of Mild-hybrid (mHEV) motor vehicles1,3 %—31.12.2025
0.7641ex8507600058Prismatic lithium-ion electric accumulator with:a width of 120,0 mm or more but not more than 305,0 mm,a thickness of 12,0 mm or more but not more than 67,0 mm,a height of 72,0 mm or more but not more than 126,0 mm,a nominal voltage of 3,6 V or more but not more than 3,75 V, anda nominal capacity of 6,9 Ah or more not more than 265 Ah,for use in the manufacture of rechargeable electric vehicle batteries1,3 %—31.12.2025
0.7888ex8507600068Lithium-ion accumulator in a metal housing, witha length of 65 mm or more, but not more than 225 mm,a width of 10 mm or more, but not more than 75 mm,a height of 60 mm or more, but not more than 285 mm,a nominal voltage of 2,1 V or more, but not more than 3,8 V, anda nominal capacity of 2,5 Ah or more, but not more than 325 Ah1,3 %—31.12.2025
0.6753ex8507600077Lithium-ion rechargeable batteries, with:a length of 700 mm or more, but not more than 2820 mm,a width of 935 mm or more, but not more than 1660 mm,a height of 85 mm or more, but not more than 700 mm,a weight of 250 kg or more, but not more than 700 kg,a power of not more than 175 kWh,a nominal voltage of 320 V or more, but not more than 430 V1,3 %—31.12.2025
0.8275ex8507600083Modules for the assembly of lithium-ion electric accumulators with:a length of 570 mm or more, but not more than 610 mm,a width of 210 mm or more, but not more than 240 mm,a height of 100 mm or more, but not more than 125 mm,a weight of 28 kg or more, but not more than 35 kg, anda capacity of not more than 2500 Ah and a nominal energy of less than 8,4 kW,for use in the manufacture of vehicles of subheadings 870360, 870370, 870380 and 8704601,3 %—31.12.2025
0.8419ex8507908055Top cap or housing made of aluminium or ferrous alloy or stainless steel:whether or not including parts made of aluminum and aluminium alloy,with or without sealing elements or other elements made of polymer material,with or without a "current interrupt device" and an "evacuation valve"with or without plastic socketswith an outer diameter of 17 mm or more, but not more than 18 mm,or rectangular with:length not greater than 450 mm,width not greater than 200 mm, andhight not greater than 150 mm,for use in the manufacture of lithium-ion batteries1,3 %—31.12.2025
0.5014ex85087000ex853710982098Electronic circuit cards that:are connected by wire or radio frequency to each other and the motor controller card, andregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)0 %p/st31.12.2025
0.6304ex8511300030Igniter integrated coil assembly with:an igniter,a coil on plug assembly with an integrated mounting bracket,a housing,a length of 90 mm or more but not more than 200 mm (± 5 mm),an operating temperature of – 40 oC or more but not more than 130 oC,a voltage of 10,5 V or more, but not more than 16 V0 %p/st31.12.2029
0.7024ex8511300055Ignition coil:with a length of 50 mm or more, but not more than 200 mm,with an operating temperature of – 40 oC or more, but not more than 140 oC, andwith a voltage of 9 V or more, but not more than 16 V,with or without connection cable,for use in the manufacture of engines of motor vehicles0 %—31.12.2026
0.8628ex8511800030Ignition module:made with plastics and non-ferrous metals,with the electric components cast in epoxy resin,to generate the ignition energy and to electronically control the ignition timing,to connect spark plug and circuit breaker,for use in the manufacture of two-stroke engines0 %—31.12.2028
0.8633ex8512200025An electrical component with an integrated LED, in an ABS housing, with:a voltage of 11 V or more, but not more than 15 V,a circular shape,2 terminals,an outer diameter of the housing of 36 mm or more, but not more than 42,5 mm,a diode voltage of 42 V or more, but not more than 48 V, anda current of 55 mA or more, but not more than 65 mA0 %—31.12.2028
0.6856ex8512200030Lighting module, containing at least:two LEDs,glass or plastic lenses, focusing/scattering the light emitted by the LEDs,reflectors redirecting the light emitted by the LEDs,in an aluminium housing with a radiator, mounted at a bracket with an actuator0 %p/st31.12.2025
0.6562ex8512200060Information screen displaying:at least time, date and status of safety features in a vehicle, orsafety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit,with an operating voltage of 12 V or more but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 870 %p/st31.12.2029
0.8409ex8512200070Electrical component with light guide integrated with LED, for motor vehicles with:two parallel ribs in the front area with a distance between them of 1,4 mm or more but not more than 1,8 mm,four holes with the dimension of 7,3 mm or more but not more than 7,9 mm in the short direction of the guide, anda 3-pin connector,for use in the manufacture of automotive components0 %—31.12.2027
0.8410ex8512200080Grab handle light with integrated LED, for motor vehicles:a distance between integrated spring clip and surface of 0,85 mm or more but not more than 1,85 mm,a length of the housing to two front vertical ribs of 26,45 mm or more but not more than 26,75 mm, andfour horizontal ribs where the distance on the lower area over the base radia between the two is 18,5 mm or more but not more than 18,7 mm,for use in the manufacture of automotive components0 %—31.12.2027
0.6863ex8512309020Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:a printed circuit board,a connector,whether or not a metal holder,for use in the manufacture of goods of chapter 870 %p/st31.12.2029
0.5983ex85124000ex851680201020Car door mirror heating foil:with two electrical contacts,with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),with a protective paper film on both sides0 %—31.12.2029
0.8391ex8516108010Tubular Heating Element with mounting flange for washing machines, with:a nominal output power of 1700 W at 230 V AC supply voltage,a weight of 230 g or more but not more than 250 g,a thickness of the external flange of 2 mm or more,isolation bushes of steatite or ceramic, andno flat zones in the design,for use in the manufacture of home appliance products and their components0 %p/st31.12.2027
0.5845ex8516900070Inner pot:containing side and central openings,of annealed aluminium,with a ceramic coating, heat resistant to more than 200o Cfor use in the manufacture of an electric fryer0 %p/st31.12.2027
0.6316ex8528590020Liquid crystal display colour video monitor assembly mounted on a frame,excluding those combined with other apparatus,comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,used for permanent incorporation or permanent mounting into entertainment systems for vehicles0 %—31.12.2029
0.7048ex8536411020Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less0 %—31.12.2026
0.6180ex8536419040Power relay with:electromechanical and/or electromagnetical switching function,a load current of 3 A or more but not more than 16 A,a coil voltage of 5 V or more but not more than 24 V, anda distance between the connector pins of the load circuit not more than 15,6 mm0 %p/st31.12.2029
0.8735ex8536419060Power relay with the function of safely connecting or disconnecting the charging and/or power circuit of 48V batteries in a plastic housing, containing:current sensor 50 A/400 V,high voltage MILD fuse 70 V/300 A,whether or not cable with connector,for use in the production of rechargeable batteries for hybrid and electric vehicles1,1 %—31.12.2025
0.7052ex8536490040Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts0 %—31.12.2026
0.7796ex8536490060Relay in the shape of a cube with:a coil operating voltage of 12 VDC (Voltage Direct Current) or more, but not more than 24 VDC (Voltage Direct Current),a contact current carrying capacity of 5 A or more, but not more than 15 A,a contact voltage of 80 VAC (Voltage Alternating Current) or more, but not more than 270 VAC (Voltage Alternating Current),outer dimensions of 19 mm (±0,4 mm) x 15,2 mm (±0,4 mm) x 15,5 mm (±0,4 mm),for use in the production of control board of household appliances0 %—31.12.2029
0.4614ex8536699082Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:a pulse transformer, including a wide-band ferrite core,a common mode coil,a resistor,a capacitor,for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2029
0.4616ex8536699083AC socket with a noise filter, composed of:AC socket (for power cord connection) of 230 V,integrated noise filter composed of capacitors and inductors,cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,whether or not equipped with a metal support, which joins the AC socket to the PDP TV set0 %p/st31.12.2029
0.5028ex8536699084Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2025
0.5318ex8536699085Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2026
0.5316ex8536699086High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 85280 %p/st31.12.2026
0.5181ex8536700010Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 85280 %p/st31.12.2026
0.8405ex8537109125A control unit being a printed circuit board with at least:a microprocessor,a programmable memory,a single connector,a PPE housing,a supply of voltage of 220 V or more but not more than 240 V,a length of 200 mm or more but not more than 210 mm,a width of 70 mm or more but not more than 100 mm, anda height of 20 mm or more but not more than 30 mm,for use in the manufacture of dishwashers0 %—31.12.2027
0.8392ex8537109135A control unit being a printed circuit board with at least:a microprocessor,a programmable memory,two or more connectors, but not more than twelve,with or without LCD display,with or without WiFi module, andwith or without an integrated speaker,for use in the manufacture of built-in ovens0 %—31.12.2027
0.8460ex8537109143Electronic suspension control unit with:a printed circuit board in plastic housing,LIN and CAN buses,a programmable memory,a signal processor,an operating direct current voltage of 9 V or more but not more than 16 V,at least one connector,whether or not with metal mounting bracket,for use in the manufacture of goods of Chapter 870 %—31.12.2027
0.8085ex8537109145Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with:a programmable memory,a microprocessor,at least one composite connector,a voltage of 24 V,with a length of 350 mm or more but not more than 400 mm,with a width of 200 mm or more but not more than 250 mm,with a height of 80 mm or more but not more than 120 mm,in a metal housing0 %—31.12.2025
0.6864ex8537109150Fuse control module in a plastic housing with mounting brackets comprising:sockets with or without fuses,connecting ports,a printed circuit board with embedded microprocessor, micro switch and relay,of a kind used in the manufacture of goods of chapter 870 %p/st31.12.2025
0.7627ex8537109157Programmable memory control board with:4 or more stepper motor drivers,4 or more outputs with MOSFET transistors,a main processor,3 or more inputs for temperature sensors,for a voltage of 10 V or more but not more than 30 V,for use in the manufacture of 3D printers0 %—31.12.2029
0.6163ex85371091ex853710986045Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:an AC power input of 208 V or more but not more than 400 V,a logic power input of 24 V DC,an automatic circuit breaker,a main power switch,internal or external electrical connectors and cables,in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm,of a kind used for manufacturing recycling or sorting machines0 %p/st31.12.2029
0.7251ex8537109170Programmable motor memory controller for a voltage not exceeding 1000 V, comprising at least:a printed circuit with active and passive components,an aluminium housing, andmultiple connectors0 %p/st31.12.2027
0.6140ex8537109830Motor bridge ICs without programmable memory consisting of:one or more integrated circuits, not interconnected, on separate lead frames,also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in carsmounted in a plastic housing0 %p/st31.12.2029
0.7194ex8537109833Lever for control module under the steering wheel:with several single or multi-positional electrical switches (push-button, rotary or other),equipped with printed circuit boards and/or electrical cables,for a voltage of 9 V or more but not more than 16 V,of a kind used in the manufacture of motor vehicles of Chapter 870 %p/st31.12.2026
0.6889ex8537109835Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:2 rotary knobs27 or more pushbuttonsLED lights2 integrated circuits for receiving and sending of control signals via the LIN-bus0 %p/st31.12.2025
0.8401ex8537109838Control panel with switches for mirror, windows and other functions in vehicles, with:a total length of 144 mm or more but not more than 150 mm,a distance between intended screwing interface center points of 31 mm or more but not more than 31,50 mm, andelectric components inside the panel with integrated LEDs,for use in the manufacture of automotive components0 %—31.12.2027
0.8408ex8537109843Switch for motor vehicle seat regulation with a memory function, with:three single switches,a five-pin connector,for a voltage of 9 VDC or more but not more than 16 VDC, andelectric components inside the panel with integrated LED,for use in the manufacture of automotive components0 %—31.12.2027
0.8400ex8537109848Memory switch control panel for seat and lock switch for vehicles with:a width of 70,2 mm or more but not more than 70,5 mm,parallel ribs with a distance between them of 2,6 mm or more but not more than 2,8 mm on the rear side,a 5-pin connector, andelectric components inside the panel with integrated LED,for use in the manufacture of automotive components0 %—31.12.2027
0.6507ex8537109850Electronic control unit BCM (Body Control Module) or IBM (Integrated Body Control Module) or similar:comprising at least a plastic box with printed circuit board, with operating direct voltage of 9 V or more, but not more than 16 V,whether or not with metal holder,able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2029
0.8407ex8537109853A control unit being a printed circuit board with at least:a microprocessor,two or more connectors but not more than four,modified resins,a length of 180 mm or more but not more than 250 mm,a width of 130 mm or more but not more than 200 mm, anda height of 40 mm or more but not more than 60 mm,for use in the manufacture of washing machines0 %—31.12.2027
0.8393ex8537109857A control unit being a printed circuit board with at least:a microprocessor,eight connectors or more but not more than eleven,a supply voltage of 215 V or more but not more than 245 V,a housing of PA6-MR30,with or without a transformer,with or without a high power relay,with or without insulated-gate bipolar transistor,a length of 280 mm or more but not more than 345 mm,a width of 400 mm or more but not more than 470 mm,a height of 28 mm or more but not more than 45 mm,for use in the manufacture of induction stoves0 %—31.12.2027
0.8406ex8537109863A control unit being a printed circuit board with at least:a microprocessor,two connectors,a supply voltage of 215 V or more but not more than 245 V,no housing,a length of 100 mm or more but not more than 120 mm,a width of 40 mm or more but not more than 50 mm, anda height of 20 mm or more but not more than 30 mm,for use in the manufacture of refrigerators0 %—31.12.2027
0.8132ex8537109880Propulsion Control System with at least:a DC/AC inverter,a power of 190 kW or more but not more than 220 kW,a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,an integral control of all drive motor and generator traction system functions,a CAN communications interface with System Control Unit,a liquid cooled system,a length of 300 mm or more but not more than 950 mm,a width of 350 mm or more but not more than 600 mm,a height of 200 mm or more but not more than 350 mm,a weight of 40 kg or more but not more than 90 kg0 %p/st31.12.2025
0.8124ex8537109888Control panel for car radio and/or navigation control and/or climate unit and heater unit control with:electronic passive components,at least two switches,LEDs,at least one connector,whether or not warning triangle switch,for a voltage not exceeding 16 V,for use in the manufacture of goods of Chapter 870 %—31.12.2025
0.3663ex8537109893Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems0 %p/st31.12.2027
0.6866ex85389091ex853890992050Interior antenna for a car door locking system, comprising:an antenna module in a plastic housing,whether or not a connection cable with a plug,whether or not a connector,at least one mounting bracket,whether or not PCB including integrated circuits, diodes and transistors,for use in the manufacture of goods of Chapter 870 %p/st31.12.2025
0.7195ex8538909960Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 870 %p/st31.12.2026
0.2580ex8540208091Photomultiplier0 %—31.12.2026
0.3445ex8540890091Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0 %—31.12.2029
0.7409ex8540910020Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), with electric connectorswith or without a metal housing,with or without a graphite carbon shield mounted in a mini-Vogel type system,with or without separate pyrolytic carbon blocks used as heating elements, anda cathode temperature of less than 1800 K at a filament current of 1,26 A0 %—31.12.2027
0.7130ex8543709015Laminated electrochromic film consisting of:two outer layers of polyester,a middle layer of acrylic polymer and silicone, andtwo electric connection terminals0 %—31.12.2026
0.8333ex8543709027Electronic control unit of the 360-degree vehicle situation display system with:an operating DC voltage of 9 V or more but not more than 16 V,a videoprocessor,a signal processor,one or more connectors, andwhether or not with a metal mounting bracket,for use in the manufacture of goods of Chapter 870 %—31.12.2027
0.2826ex8543709030Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2029
0.7055ex8543709033High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %—31.12.2026
0.2590ex8543709045Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing0 %p/st31.12.2029
0.3131ex8543709055Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing0 %p/st31.12.2029
0.2816ex8543709085Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2029
0.6709ex8544200030Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:a coaxial cable,two or more connectors, and3 or more plastic clips for attachment to the dashboardof a kind used in the manufacture of goods of Chapter 870 %—31.12.2026
0.6377ex85443000ex854442904040Wire harness or cable for steering system:for an operating voltage of 12 V,with connectors on both sides,whether or not with anchor clamps of plastic for mounting on a motor vehicle steering box0 %p/st31.12.2029
0.6710ex85443000ex854442906050Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 870 %—31.12.2025
0.8331ex8544300065Six core cable connecting the oil pressure sensor and the differential controller of vehicles:with PVC-coating,with three multiple connectors, andwith or without plastic clip,for use in the manufacture of goods of Chapter 870 %—31.12.2027
0.8647ex8544300075Wiring harness to connect the integrated battery system with the car’s control systems, containing:an input waterproof connector,four or more output connectors,two or more plastic clips for attachmentfor use in the production of rechargeable batteries for hybrid and electric vehicles0 %—31.12.2028
0.6867ex8544300085Extension two-core cable with two connectors, containing at least:a rubber grommet,a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 870 %p/st31.12.2025
0.4980ex8544429010Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (±0,25 V)connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,outer screening shielding,used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits0 %p/st31.12.2029
0.4464ex85444290ex85444993ex85444995202010PET or PVC insulated flexible cable with or without connector with:voltage of not more than 250 V,a current of not more than 1 A,a heat resistance of not more than 105 oC,individual wires of a thickness of not more than 0,1 mm (±0,01 mm) and a width of not more than 0,8 mm (±0,03 mm),a distance between conductors of not more than 0,5 mm anda pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm0 %—31.12.2028
0.8572ex85444290ex854460104510Specially designed connector for solar power system:as 1-part system with 1 plastic housing with 1 or more but not more than 4 diodes and 2 insulated copper cables with connectors oras 3-part system with one plastic housing with 1 or more but not more than 4 diodes and 2 plastic housings with insulated copper cables with connectors,with a current for the diodes of 3 A or more but not more of 50 A,with a cable length of not more than 1500 mm,with a maximum rated voltage of 1500 V0 %—31.12.2028
0.6853ex8544429070Electric conductors:of a voltage of not more than 80 V,with a length of not more than 120 cm,fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors0 %p/st31.12.2025
0.2424ex8544499310Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %p/st31.12.2029
0.6861ex8544499330Electric conductors:of a voltage of not more than 80 V,of a platinum-iridium-alloy,coated with poly(tetrafluoroethylene),without connectors,for use in the manufacture of hearing aids, implants and speech processors0 %m31.12.2025
0.3144ex8548009041Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing0 %p/st31.12.2029
0.3193ex8548009043Contact image sensor0 %p/st31.12.2029
0.3763ex8548009048Optical unit, containing at leasta laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nman optical lensa "Recording Photodetector Integrated Circuit" (PDIC)a focussing and tracking actuator0 %p/st31.12.2026
0.7165ex87081010ex870810901010Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 870 %p/st31.12.2026
0.6590ex87083010ex870830914030Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2029
0.6707ex87083010ex870830917040Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2025
0.6869ex87084020ex870840502010Automatic hydrodynamic gearboxwith a hydraulic torque converter,without transfer box and cardan shaft,whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 870 %p/st31.12.2025
0.7856ex87084020ex870840507060Manual gearbox in cast aluminium housing for transverse installation with:a width of not more than 480 mm,a height of not more than 400 mm,a length of not more than 550 mm,five or six gears,a differential gear,an engine torque of 400 Nm or less,for use in the manufacture of motor vehicles of Heading 87030 %—31.12.2029
0.8279ex8708402080Transmission gearbox without torque converter, with:dual clutch,7 or more forward gears,1 reverse gear,a maximum torque of 390 Nm,whether or not with electric motor integrated,a height of 400 mm or more but not more than 600 mm,a width 350 mm or more but not more than 600 mm, anda weight of 70 kg or more but not more than 110 kg,for use in the manufacture of motor vehicles of Heading 87030 %p/st31.12.2026
0.8377ex8708405070Automatic transmission equipped with double clutch system with:at least 8 gears,an engine torque of 800 Nm or more,an electronic differential,a P-lock safety system, anda TCU transmission control unit,for use in the manufacture of motor vehicles of heading 87030 %—31.12.2027
0.7987ex87085020ex870850551550Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened0 %—31.12.2025
0.8461ex8708502018Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:two cardan rods,central universal joint,central bearing with suspension in a plastic cover,universal joints on both ends of the shaft,slip, tube and end yokes,of a length of 1,4 m or more but not more than 2,4 m,for use in the production of goods of Chapter 870 %—31.12.2027
0.6648ex87085020ex870850992010Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middleof a length of 1 m or more but not more than 2 m,of a weight of 6 kg or more but not more than 9 kg0 %p/st31.12.2025
0.7988ex87085020ex870850992545Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:6 ball tracks or more but not more than 8, witha thread,an external involute spline with 21 or more but not more than 38 teeth,for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,forged, turned, milled and hardened0 %—31.12.2025
0.7989ex87085020ex870850993550Inboard constant velocity joint tripod housing, with:an outer diameter of 67,0 mm or more but not more than 99,0 mm,3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,an external spline with 21 teeth or more but not more than 41,forged, turned, rolled and hardened0 %—31.12.2025
0.7990ex87085020ex870850994555Outboard constant velocity joint inner race, part of the vehicle’s drive system, with:6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,forged, turned, milled, broached and hardened0 %—31.12.2025
0.7359ex87085020ex87085055ex87085091ex8708509950201040Double flange bearing of 3rd generation, for motor vehicles,with double-row ball bearing,whether or not with impulse (encoder) ring,whether or not with antilock brake system (ABS) sensor,whether or not with mounted screws,for use in the manufacture of goods of chapter 870 %—31.12.2027
0.7991ex87085020ex870850995560Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,forged, turned, broached and hardened0 %—31.12.2025
0.7593ex87085020ex870850997025Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:an outer diameter of 67,0 mm or more but not more than 84,5 mm,3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,spline with 21 teeth or more but not more than 35,bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves0 %—31.12.2029
0.7640ex87085020ex870850997535Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, andwith a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees0 %—31.12.2029
0.6711ex87088020ex870880351010Upper strut insulator containing:a metal holder with three mounting screws, anda rubber bump,for use in the manufacture of goods of Chapter 870 %p/st31.12.2025
0.7365ex8708809930Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:with a chrome coating,of a diameter of 11 mm or more, but not more than 28 mm,of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding0 %—31.12.2027
0.6509ex87089120ex870891352010Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2029
0.6859ex87089120ex870891993030Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with:an insulating area flatness of not more than 0,1 mm,a permissible particle quantity of 0,3 mg per tank,a distance between pores of 2 mm or more,pore sizes of not more than 0,4 mm, andnot more than 3 pores larger than 0,2mm,with a weight of 0,2 kg or more but not more than 3 kg0 %p/st31.12.2025
0.7716ex8708913520Turbocharger cooling duct containing:an aluminum alloy duct with at least one metal holder and at least two mounting holes,a rubber pipe with clips,a stainless steel flange highly resistant to corrosion [SUS430JIL],for use in the manufacture of compression ignition engines of motor vehicles0 %—31.12.2029
0.8538ex8708913530Two-circuit aluminum heat exchanger for automatic transmission of passenger cars:of the stack-plate type,with two pairs of inlet and outlet, each for the coolant/water circuit and the transmission oil circuit,with at least two mounting holes,whether or not with the connection hoses,for use in the manufacture of goods of Chapter 870 %—31.12.2028
0.6688ex87089510ex870895992030Inflatable safety cushion of high strength polyamide fibre:sewn,folded,with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,suitable for cool inflator technology0 %p/st31.12.2025
0.6687ex87089510ex870895993040Inflatable sewn safety cushion of high strength polyamide fibre:folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, orflat safety cushion with or without thermal folding0 %p/st31.12.2025
0.8292ex8708959950Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1000 pieces or more0 %p/st31.12.2026
0.6583ex87089910ex870899976050Aluminium engine bracket, with dimensions of:height of more than 10 mm but not more than 200 mm,width of more than 10 mm but not more than 250 mm,length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:internal porosity not more than 1 mm,outer porosity not more than 2 mm,rockwell hardness HRB 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles0 %p/st31.12.2029
0.8127ex8708999728A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,with an operating pressure of not less than 35 MPa,with a durability declared by the manufacturer of not less than 20 years,with a cylinder capacity of 180 liters or more but not more than 375 liters,equipped with a set of solenoid, manual and safety PRD valves,with a total width of 1800 mm or more but not more than 2300 mm,with a total height of 400 mm or more but not more than 500 mm,with a total length of 1200 mm or more but not more than 3600 mm0 %—31.12.2025
0.8128ex8708999738A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,with an operating pressure of not less than 20 MPa,with a shelf life declared by the manufacturer of not less than 20 years,with a cylinder capacity of 315 liters or more but not more than 375 liters,equipped with a set of solenoid, manual and safety PRD valves,with a total width of 2200 mm or more but not more than 2300 mm,with a total height of 450 mm or more but not more than 460 mm,with a total length of 3500 mm or more but not more than 3600 mm0 %—31.12.2025
0.6686ex8714109010Motorcycle fork rod inner tubes:of SAE1541 carbon steel,with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,having an elongation at break of 15 %,perforated0 %p/st31.12.2025
0.6848ex8714109070Motor bikes radiators in consignment of 100 pieces or more0 %p/st31.12.2027
0.6172ex87149130ex87149130ex87149130253572Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2029
0.6879ex8714961010Pedals, for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2025
0.7421ex87149910ex871499102089Bicycle handlebars:with or without an integrated stem,either made out of carbon fibres and synthetic resin or made of aluminium,for use in the manufacture of bicycles (including electric bicycles)0 %—31.12.2027
0.7710ex87149950ex871499501191Derailleur gears, consisting of:rear derailleur and mounting articles,with or without front derailleur,for use in the manufacture of bicycles (including electric bicycles)0 %p/st31.12.2029
0.6878ex8714999030Seat posts, for use in the manufacture of bicycles (including electric bicycles)0 %p/st31.12.2025
0.7708ex8714999040Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)0 %p/st31.12.2029
0.8507ex8714999050Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles0 %p/st31.12.2027
0.3191ex9001109010Image reverser made up from an assembly of optical fibres0 %—31.12.2029
0.6402ex90015041ex900150494040Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses0 %—31.12.2027
0.6401ex9001508030Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses0 %—31.12.2026
0.7590ex9002110018Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:a horizontal field of view range to a maximum of 120 deg,a diagonal field of view range to a maximum of 105 deg,a focal length to a maximum of 7,50 mm,a relative aperture of a maximum of F/2,90,a maximum diameter of 22 mm0 %—31.12.2029
0.5692ex9002110020Lenses:measuring not more than 95 mm × 55 mm × 50 mm,with a resolution of 160 lines/mm or better, andwith a zoom ratio of 3 or more times0 %—31.12.2027
0.7973ex9002110023Lens with:motorized focus, zoom, aperture,electronically switchable infrared cut filter,an adjustable focal length not less than 2,7 mm and not more than 55mm,a weight of not more than 120 g,a length of less than 70 mm,a diameter of not more than 70 mm0 %—31.12.2025
0.7103ex9002110045Infrared optical unitwith lenses of silicon, germanium or chalcogenide glass of a diameter not more than 62 mm (±0,05 mm),whether or not mounted on a machined aluminium alloy supportof a kind used for thermal cameras or IP network cameras0 %—31.12.2026
0.3177ex9002110050Lens unit:having a focal length of 25 mm or more but not more than 150 mm,consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm0 %—31.12.2029
0.6572ex9002110085Lens assembly with:a horizontal field of view range of 20 deg or more, but not more than 200 deg,a focal length of 1,16 mm or more, but not more than 20 mm,a relative aperture of F/1,2 or more, but not more than F/4, anda diameter of 5 mm or more, but not more than 40 mm,for use in the manufacture of CMOS automotive cameras or in IP network cameras production0 %—31.12.2029
0.6288ex9025804050Electronic semiconductor sensor for measuring at least two of the following quantities:Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:one or more monolithic application-specific integrated circuits (ASIC),one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,of a kind used for incorporation into products of Chapters 84-90 and 950 %p/st31.12.2029
0.3292ex9032890030Electronic controller of electric power steering (EPS controller)0 %p/st31.12.2029
0.4253ex9032890040Digital valve controller for controlling liquids and gases0 %p/st31.12.2027
0.7004ex9032890050Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprisingan electronic mass flow regulator, suitable for receiving and sending of analogue and digital signalsfour pressure transducers,two or more pressure valves,electric interfaces andseveral connectors for gas linessuitable for in-situ plasma bonding processes or for multi frequency bond activating processes0 %—31.12.2026
0.5025ex9401992010Ratchet disk for use in the manufacture of reclining car seats0 %p/st31.12.2028
0.4846ex95030075ex950300951010Plastic cable car scale models, whether or not with a motor, for printing0 %p/st31.12.2025
0.8786ex9503009530Miniature engine:consisting of a plastic body,containing a spring,providing movement of gear shafts with spring tension,for use in the manufacture of the toys under heading 95030 %—31.12.2029
0.8789ex9503009540Miniature engine driven by mechanical friction:consisting of a plastic body,with shaft length 10,5 cm or more but not more than 14,5 cm,containing a metal disc,creating movement by causing the gears to rotate with the friction force,for use in the manufacture of the toys under heading 95030 %—31.12.2029
0.6949ex9607209010Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers0 %—31.12.2025
0.3286ex9608910010Non-fibrous plastic pen-tips with an internal canal0 %—31.12.2029
0.3289ex9608910020Felt tips and other porous-tips for markers, without internal canal0 %—31.12.2029
0.2737ex9612101010Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)0 %—31.12.2029