Commission Implementing Regulation (EU) 2023/1041 of 24 May 2023 granting a Union authorisation for the biocidal product ‘TWP 094’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance)
Commission Implementing Regulation (EU) 2023/1041of 24 May 2023granting a Union authorisation for the biocidal product TWP 094 in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council(Text with EEA relevance) THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal productsOJ L 167, 27.6.2012, p. 1., and in particular Article 44(5), first subparagraph, thereof,Whereas:(1)On 12 November 2018, TROY CHEMICAL COMPANY BV submitted to the European Chemicals Agency ("the Agency") an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 for a Union authorisation of a biocidal product named TWP 094 of product-type 8, as described in Annex V to that Regulation, providing written confirmation that the competent authority of Denmark had agreed to evaluate the application. The application was recorded under case number BC-QN044827-14 in the Register for Biocidal Products.(2)TWP 094 contains 3-Iodo-2-propynyl butylcarbamate (IPBC) as the active substance, included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-type 8.(3)On 7 January 2022, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the Agency.(4)On 5 July 2022, the Agency submitted to the Commission its opinionECHA opinion of 16 June 2022 on the Union authorisation of TWP 094 (ECHA/BPC/348/2022), https://echa.europa.eu/opinions-on-union-authorisation, the draft summary of the biocidal product characteristics ("SPC") of TWP 094 and the final assessment report on the biocidal product, in accordance with Article 44(3) of Regulation (EU) No 528/2012.(5)The opinion concludes that TWP 094 is a biocidal product within the meaning of Article 3(1), point (a), of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that, subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(1) of that Regulation.(6)On 18 August 2022, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.(7)The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for TWP 094.(8)In its opinion, the Agency states that the authorisation holder is to complete a long-term storage test at ambient temperature for TWP 094 and provide a test on persistent foaming and a test on the degree of dissolution and dilution stability for the soluble concentrate formulation type of the product as a condition in the authorisation. The results of the long-term storage test should confirm the shelf life of the biocidal product of one year granted based on an accelerated storage stability test and the submitted interim results of a long-term storage stability test at ambient temperature. The information to be provided on persistent foaming and degree of dissolution and dilution stability should confirm the technical properties of the product for the formulation type soluble concentrate of the product.(9)The Commission agrees with the opinion of the Agency and considers that the submission of the results of the test and the information for the soluble concentrate formulation type should be a condition relating to the making available on the market and use of the biocidal product TWP 094 pursuant to Article 22(1) of Regulation (EU) No 528/2012. The Commission also considers that the fact that data is to be provided after the authorisation is granted does not affect the conclusion on the fulfilment of the condition under Article 19(1), point (d), of that Regulation based on existing data.(10)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,HAS ADOPTED THIS REGULATION:
Article 1A Union authorisation with authorisation number EU-0028968-0000 is hereby granted to TROY CHEMICAL COMPANY BV for the making available on the market and use of the biocidal product TWP 094 subject to compliance with the terms and conditions set out in Annex I and in accordance with the summary of the biocidal product characteristics set out in Annex II.The Union authorisation is valid from 19 June 2023 to 31 May 2033.
Article 2This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 24 May 2023.For the CommissionThe PresidentUrsula von der LeyenANNEX ITERMS AND CONDITIONS (EU-0028968-0000)The authorisation holder shall conduct a long-term storage test at ambient temperature for the product TWP 094 to confirm the shelf life of the biocidal product of 12 months. The study must include a test of degree of dissolution and dilution stability after storage for 12 months at ambient temperature. If the degradation exceeds 10%, efficacy data and information on the degradation products and their impact on risk assessment is required and shall be included.The authorisation holder shall provide a test of persistent foaming and a test on degree of dissolution and dilution stability to confirm the soluble concentrate formulation type of the product TWP 094.By 19 June 2024 the authorisation holder shall submit the results of the test and the information to the Agency.ANNEX IISummary of product characteristics for a biocidal productTWP 094Product type 8 - Wood preservatives (Preservatives)Authorisation number: EU-0028968-0000R4BP asset number: EU-0028968-00001.ADMINISTRATIVE INFORMATION1.1.Trade name(s) of the product
Trade name(s)TWP 094StoPrim Protect W 22Aqua Holz-Imprägnier-GrundGjøco Impregnering AquaOmnia PreservativeVoima Aqua BaseAqua IG-16Aqua Holz-ImprägnierungInduline SW-906Sadolin QD Wood Preserver WBHolz-Öl Imprägniergrund WXImprägniergrund W21000Imprägniergrund W219Protox WoodprotectB3 Grundingsolie WPGVK-Pohjuste PlusPinja BaseGrundoljaVilla ProtectPrimex Olja plusPrimex OljaValtti Plus PrimerGori Professional Træimprægnering VandigSigmalife WB PrimerGORI Transparent grunder træværk 11IM151Aprofilan-prevent proimpralan-Grund I100 proimpralan-Grund G300 proimpralan-Grund G400 proRhenocryl pro-TL 30 EURhenocryl pro-TL 45 EUHolzschutzgrund / sous-couche de protection du boisImpregnační základImpregnačný základHoutimpregneerGrund pentru protecția lemnuluiHolzschutzgrundierungOsmo Træimprægnering WR Aqua 4019Osmo Träimpregnering WR Aqua 4019Osmo Treimpregnering WR Aqua 4019Osmo Puunsuojapohjuste WR Aqua 4019Osmo Color Träimpregnering WR Aqua 4019Osmo Imprégnation pour le bois WR aqua 4019Osmo Holz-Imprägnierung WR Aqua 4019Osmo Impregnace dřeva WR Aqua 4019Osmo Impregnácia dreva WR Aqua 4019Osmo Impregnazione per legno WR Aqua 4019Osmo Impregnálás WR Aqua 4019Osmo Impregnat do drewna WR Aqua 4019Osmo Houtimpregneer WR Aqua 4019Osmo Imprégnation pour le bois WR aqua 4019Osmo Holz-Imprägnierung WR Aqua 4019Osmo Houtimpregneer WR Aqua 4019Osmo Impregnarea lemnului WR Aqua 4019Osmo WR Base Coat Aqua 4019Osmo Color Puiduimmutus WR Aqua 4019Osmo Impregnēšana kokam WR Aqua 4019Osmo Impregnavimas WR Aqua 4019Osmo WR Base Coat Aqua 4019Osmo Impregnación para madera WR Aqua 4019Osmo Impregnação para madeira WR Aqua 4019Osmo Impregnacija lesa WR Aqua 4019Osmo Impregnacija drva WR Aqua 4019Flügger 01 Wood Tex Grund-olieFlügger 01 Wood Tex Grund-oljaFlügger 01 Wood Tex Grunn-oljeFlügger 01 Wood Tex GrundierölFlügger 01 Wood Tex Primaire Bois HydrofugeFlügger 01 Wood Tex Olej-gruntujacyFlügger 01 Wood TexFlügger 01 Wood Tex GrundolieHolzschutzgrundWOODEX AQUA BASE +AM0572/00 Hydroplus protettivo per legno458-0004/2 Idro Ceopren protettivo per legnoHI2550 Linea Blu protettivo per LegnoAM0572/00 Hydroplus Wood protection458-0004/2 IDRO CEOPREN Wood protectionHI2550 Linea Blu Wood ProtectionAA1960 Laqvin Seal37647 Ronseal Multi-Purpose Wood Treatment37648 Ronseal Multi-Purpose Wood TreatmentMasqueWoodPro 10CETOL WP 5000-02BAUFIX Holz-ImprägnierungYM---M103/-----674840 HF PROTECTIVE PRIMER WGrundolja VRonseal Wood PreserverRonseal Trade Wood PreserverScrewfix Wood PreserverB&Q Wood PreserverGood Home Wood PreserverSherwin Williams Wood PreserverRonseal Fence Life Wood PreserverRonseal Shed & Fence PreserverCastorama Traitement Bois ExtérieurBrico Depot Traitement Bois ExtérieurGood Home Traitement Bois ExtérieurAltax Traitement Bois ExtérieurRonseal Traitement Bois ExtérieurValspar Traitement Bois ExtérieurValspar Pro Traitement Bois ExtérieurSherwin Williams Traitement Bois ExtérieurLuxens Traitement Bois ExtérieurCastorama Impregnat do drewnaGood Home Impregnat do drewnaAltax Impregnat do drewnaValspar Impregnat do drewnaValspar Pro Impregnat do drewnaSherwin Williams Impregnat do drewnaLuxens Impregnat do drewnaCastorama Conservant pentru lemnGood Home Conservant pentru lemnAltax pentru lemnValspar pentru lemnValspar Pro pentru lemnSherwin Williams pentru lemn
1.2.Authorisation holder
Name and address of the authorisation holderNameTROY CHEMICAL COMPANY BV
AddressPoortweg 4C, 2612PA Delft Netherlands
Authorisation numberEU-0028968-0000
R4BP asset numberEU-0028968-0000
Date of the authorisation19 June 2023
Expiry date of the authorisation31 May 2033
1.3.Manufacturer(s) of the product
Name of manufacturerTroy Chemical Company BV
Address of manufacturerPoortweg 4C, 2612 PA Delft Netherlands
Location of manufacturing sitesWestelijke Randweg 9, 4791 RT Klundert NetherlandsIndustriepark 23, 56593 Horhausen GermanyGeschwister-Scholl-Straße 127, 39218 Schönebeck/Elbe GermanyMecklenburger Str. 229, 23568 Lübeck GermanyHalchtersche Str. 33, 38304 Wolfenbüttel GermanyAm Nordturm 5, 46562 Voerde GermanyAm Alten Galgen 14, 56410 Montabaur Germany
Name of manufacturerTikkurila Oyj
Address of manufacturerKuninkaalantie 1, FI-01301 Vantaa Finland
Location of manufacturing sitesKuninkaalantie 1, FI-01301 Vantaa FinlanduL.Mościckiego 23, 39-200 DĘBICA Poland
Name of manufacturerAkzo Nobel Industrial Coatings AB
Address of manufacturerStaffanstorpsvägen 50, 20517 Malmö Sweden
Location of manufacturing sitesStaffanstorpsvägen 50, 20517 Malmö Sweden
Name of manufacturerSchulz Farben- und Lackfabrik GmbH
Address of manufacturerAn der Altnah 10, 55450 Langenlonsheim Germany
Location of manufacturing sitesAn der Altnah 10, 55450 Langenlonsheim Germany
Name of manufacturerRemmers GmbH
Address of manufacturerBernhard-Remmers-Straße 13, 49624 Löningen Germany
Location of manufacturing sitesBernhard-Remmers-Straße 13, 49624 Löningen GermanyFüllenbruchstr. 13, 32120 Hiddenhausen Germany
Name of manufacturerRemmers Industrielacke GmbH
Address of manufacturerFüllenbruchstr. 13, 32120 Hiddenhausen Germany
Location of manufacturing sitesFüllenbruchstr. 13, 32120 Hiddenhausen Germany
Name of manufacturerTeknos A/S
Address of manufacturerIndustrivej 16, DK-6580 Vamdrup Denmark
Location of manufacturing sitesIndustrivej 16, DK-6580 Vamdrup Denmark
Name of manufacturerSherwin Williams
Address of manufacturerThorncliffe Park Estate, Thorncliffe Rd, Chapeltown, S35 2YP Sheffield United Kingdom
Location of manufacturing sitesThorncliffe Park Estate, Thorncliffe Rd, Chapeltown,, S35 2YP Sheffield United KingdomKopanińska 7, 60-119 Brodziszewo Poland
Name of manufacturerSherwin-Williams Italy S.r.l.
Address of manufacturerVia Del Fiffo 12, 40065 Pianoro (BO) Italy
Location of manufacturing sitesVia Del Fiffo 12, 40065 Pianoro (BO) Italy
Name of manufacturerSherwin-Williams Sweden AB
Address of manufacturerBellö, 570 32 Hjältevad Sweden
Location of manufacturing sitesBellö, 570 32 Hjältevad Sweden
Name of manufacturerPPG Industries (Dyrup A/S)
Address of manufacturerGladsaxevej 300, 2860 Gladsaxe Denmark
Location of manufacturing sitesGladsaxevej 300, 2860 Gladsaxe Denmark
1.4.Manufacturer(s) of the active substance(s)
Active substance3-iodo-2-propynylbutylcarbamate (IPBC)
Name of manufacturerTroy Corporation
Address of manufacturer8 Vreeland Road, Florham Park, NJ 07105 New Jersey United States
Location of manufacturing sitesOne Avenue L, NJ 07105 Newark United States
Active substance3-iodo-2-propynylbutylcarbamate (IPBC)
Name of manufacturerTroy Chemical Company BV
Address of manufacturerPoortweg 4C, 2612 PA Delft Netherlands
Location of manufacturing sitesIndustriepark 23, 56593 Horhausen Germany
2.PRODUCT COMPOSITION AND FORMULATION2.1.Qualitative and quantitative information on the composition of the product
Common nameIUPAC nameFunctionCAS numberEC numberContent (%)
3-iodo-2-propynylbutylcarbamate (IPBC)Active Substance55406-53-6259-627-50,75
2.2.Type of formulationAny other liquid (AL) and Soluble concentrate (SL)3.HAZARD AND PRECAUTIONARY STATEMENTS
Hazard statementsHarmful to aquatic life with long lasting effects.Contains 3-iodo-2-propynyl butylcarbamate (IPBC). May produce an allergic reaction.
Precautionary statementsAvoid release to the environment.Dispose of contents in accordance with local / national regulations.Dispose of container in accordance with local / national regulations.
4.AUTHORISED USE(S)4.1.Use description
Table 1. Use # 1 – Brushing and rolling (general public, professional)
Product typePT08 - Wood preservatives (Preservatives)
Where relevant, an exact description of the authorised useFungicide.
Target organism(s) (including development stage)Common name: Blue stain fungiDevelopment stage:Scientific name: Basidiomycetes:Common name: Brown rot fungiDevelopment stage:
Field(s) of useIndoorOutdoorSoftwoodPreventative treatmentUse class 2 as described in EN standard 335:2013 (situation in which the wood or wood-based product is under cover and not exposed to the weather (particularly rain and wind-driven rain) but where occasional, but not persistent, wetting can occur.Use class 3 as described in EN standard 335:2013 (situation in which the wood or wood-based product is above ground and exposed to the weather (particularly rain)See section 6 for the full titles of the EN standards.
Application method(s)Method: brushing and rollingDetailed description:Superficial treatment
Application rate(s) and frequencyApplication Rate: 100 ml/m2 (against blue stain fungi); 150 - 160 ml/m2 (against wood-rotting fungi)Dilution (%): - Ready-to-use productNumber and timing of application:1 application
Category(ies) of usersProfessionalGeneral public (non-professional)
Pack sizes and packaging materialCan (high-density polyethylene) HDPE: 0,375 l, 0,75 l, 1,0 l, 2,5 l, 5,0 lFor professional use only:Can HDPE: 10 l, 20 l, 25 l
4.1.1.Use-specific instructions for useDo not dilute (ready-to-use).Apply the product to the wood with a brush or roller and let dry for approximately 24 hours. Cleaning of the tools can be performed using mild soap and water.Use of a topcoat is required. The topcoat cannot contain a film- or wood preservative. The topcoat should be maintained.The product protects the wood surface against blue stain fungi on wood that is minimum "moderately to slightly durable to fungi" according to EN 350:2016: Durability Class (DC) 3-4. See section 6 for the full title of the EN standards.4.1.2.Use-specific risk mitigation measuresDo not use/apply directly on or near food, feed or drinks, or on surfaces or utensils likely to be in direct contact with food, feed, drinks and livestock/pets.Do not apply near bodies of surface water.During product application (to timbers) and whilst surfaces are drying, do not contaminate the environment. All losses of the product have to be contained by covering the ground (e.g. by tarpaulin) and disposed of in a safe way.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general direction for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general direction for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general direction for use.4.2.Use description
Table 2. Use # 2 – Manual dipping (professional)
Product typePT08 - Wood preservatives (Preservatives)
Where relevant, an exact description of the authorised useFungicide.
Target organism(s) (including development stage)Common name: Blue stain fungiDevelopment stage:Scientific name: Basidiomycetes:Common name: Brown rot fungiDevelopment stage:
Field(s) of useIndoorSoftwoodPreventative treatmentUse class 2Use class 3
Application method(s)Method: manual dippingDetailed description:Superficial treatment
Application rate(s) and frequencyApplication Rate: 100 ml/m2 (against blue stain fungi); 150 - 160 ml/m2 (against wood-rotting fungi)Dilution (%): - Ready-to-use productNumber and timing of application:1 application
Category(ies) of usersProfessional
Pack sizes and packaging materialCan HDPE: 0,375 l, 0,75 l, 1,0 l, 2,5 l, 5,0 l, 10 l, 20 l, 25 l
4.2.1.Use-specific instructions for useDo not dilute (ready-to-use).Drying time: Dry to handle and ready for topcoat: approximately 24 hours.Cleaning of tools: Use water and mild soap.Use of a topcoat is required. The topcoat cannot contain a film- or wood preservative. The topcoat should be maintained.The product protects the wood surface against blue stain fungi on wood that is minimum "moderately to slightly durable to fungi" according to EN 350:2016: Durability Class (DC) 3-4. See section 6 for the full title of the EN standards.4.2.2.Use-specific risk mitigation measuresWear protective chemical resistant gloves during product handling phase classified under the European Standard EN 374 or equivalent. Glove material to be specified by the authorisation holder within product information.Wear a protective coverall (type 6, EN 13034 or equivalent).This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.See section 6 for the full titles of the EN standards and legislation.Application by manual dipping shall be performed for a maximum of 30 minutes per day.Do not use/apply directly on or near food, feed or drinks, or on surfaces or utensils likely to be in direct contact with food, feed, drinks and livestock/pets.During product application (to timbers) and whilst surfaces are drying, do not contaminate the environment. All losses of the product have to be contained by covering the ground (e.g. by tarpaulin) and disposed of in a safe way.Freshly treated timber must be stored after treatment under shelter or on a hard, impermeable surface to prevent direct losses to soil and water.Any losses should be collected for reuse or disposal.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general direction for use.4.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general direction for use.4.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general direction for use.4.3.Use description
Table 3. Use # 3 – Automated dipping, automated spraying, flow coating/deluging (industrial)
Product typePT08 - Wood preservatives (Preservatives)
Where relevant, an exact description of the authorised useFungicide.
Target organism(s) (including development stage)Common name: Blue stain fungiDevelopment stage:Scientific name: Basidiomycetes:Common name: Brown rot fungiDevelopment stage:
Field(s) of useIndoorSoftwoodPreventative treatmentUse class 2Use class 3
Application method(s)Method: automated dipping, automated spraying, flow coating/delugingDetailed description:Superficial treatment.Similar to flow coating/deluging, automated spraying is assumed to be an essentially fully enclosed process, whereby operator exposure occurs mainly by handling wet treated wood.
Application rate(s) and frequencyApplication Rate: 100 ml/m2 (against blue stain fungi); 150 - 160 ml/m2 (against wood-rotting fungi)Dilution (%): - Ready-to-use productNumber and timing of application:1 application
Category(ies) of usersIndustrial
Pack sizes and packaging materialCan/ intermediate bulk container (IBC) HDPE: 120 l, 220 l, 1000 l
4.3.1.Use-specific instructions for useDo not dilute (ready-to-use).Drying time:until dry to touch.Use of a topcoat is required. The topcoat cannot contain a film- or wood preservative. The topcoat shall be maintained.The product protects the wood surface against blue stain fungi on wood that is minimum "moderately to slightly durable to fungi" according to EN 350:2016: Durability Class (DC) 3-4. See section 6 for the full title of the EN standards.4.3.2.Use-specific risk mitigation measuresThe product must only be loaded into industrial application equipment via a fully-automated pumping/transfer system.Wear protective chemical resistant gloves during product handling phase classified under the European Standard EN 374 or equivalent. Glove material to be specified by the authorisation holder within product information.Wear a protective coverall (type 6, EN 13034 or equivalent).This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.See section 6 for the full titles of EN standards and legislation.The product must only be used in fully automated dipping processes where all steps in the treatment and drying process are mechanised and no manual handling takes place, including when the treated articles are transported through the dip tank to draining/drying and storage (if not already surface dry before moving to storage). Where appropriate, the wooden articles to be treated must be fully secured (e.g. via tension belts or clamping devices) prior to treatment and during the dipping process, and must not be manually handled until after the treated articles are surface dry.Freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil, sewer and water.Any losses of the product shall be collected for reuse or disposal.4.3.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general direction for use.4.3.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general direction for use.4.3.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general direction for use.4.4.Use description
Table 4. Use # 4 – Double vacuum/low pressure process (industrial)
Product typePT08 - Wood preservatives (Preservatives)
Where relevant, an exact description of the authorised useFungicide.
Target organism(s) (including development stage)Scientific name: Basidiomycetes:Common name: Brown rot fungiDevelopment stage:
Field(s) of useIndoorSoftwoodPreventative treatmentUse class 2Use class 3
Application method(s)Method: Double vacuum/low pressure processDetailed description:Penetrative treatment.
Application rate(s) and frequencyApplication Rate: 74.6 - 79.5 kg/m3Dilution (%): 10% in-use solution (1 part product: 9 parts water)Number and timing of application:1 application
Category(ies) of usersIndustrial
Pack sizes and packaging materialCan/IBC HDPE: 120 l, 220 l, 1000 l
4.4.1.Use-specific instructions for useDrying time: until dry to touch.4.4.2.Use-specific risk mitigation measuresThe product must only be loaded into industrial application equipment via a fully-automated pumping/transfer system.Wear protective chemical resistant gloves during product handling phase classified under the European Standard EN 374 or equivalent. Glove material to be specified by the authorisation holder within product information.Wear a protective coverall (type 6, EN 13034 or equivalent).This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.See section 6 for full titles of the EN standards and legislation.Freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil, sewer or water.Any losses of the product shall be collected for reuse or disposal.4.4.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general direction for use.4.4.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general direction for use.4.4.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general direction for use.5.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.5.1.Instructions for useComply with the instructions for use.Do not use product on wood or wooden structures intended for use indoors, except for internal surfaces of external window frames and of external doors/door frames.The temperature must be above 5°C and relative humidity below 80% during application and drying.Stir product before use.Avoid contact with skin and eyes.Wash hands and face after application and use of the product, and before eating, drinking or smoking.5.2.Risk mitigation measuresDo not use on wood which may come in direct contact with food, feed and livestock.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentIF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.When seeking medical advice, have the product container or label at hand.5.4.Instructions for safe disposal of the product and its packagingThis product and its container must be disposed of safely as hazardous waste.Any product collected during application that is not reused must be disposed of safely as hazardous waste.Dispose of packaging and of unused product in accordance with local regulations. If required, consult a professional waste operator or local authority.5.5.Conditions of storage and shelf-life of the product under normal conditions of storageKeep out of reach of children and non-target animals/pets.Do not store near food, drink and animal feeding stuff.Shelf life: 12 months.Store below 35°C.Store in a cool, dry, well-ventilated place.Protect from frost.Protect from light.Opened containers must be carefully resealed and kept upright to prevent leakage.6.OTHER INFORMATIONRegarding Use 1 and Use 2: Professionals and/or trained professionals if required by national legislation.Full titles of EN standards and legislation mentioned in section 4.1.1, 4.2.1, 4.3.1, 4.2.2, 4.3.2 and 4.4.2:EN 335:2013 - Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based productsEN 350:2016, Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materialsEN 374 – Protective gloves against dangerous chemicals and micro-organisms. Part 1: terminology and performance requirements for chemical risks.EN 13034 - Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment).Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).