Commission Implementing Regulation (EU) 2023/611 of 17 March 2023 amending Regulation (EC) No 88/97 on the authorisation of the exemption of imports of certain bicycle parts originating in the People’s Republic of China from the extension by Council Regulation (EC) No 71/97 of the anti-dumping duty imposed by Council Regulation (EEC) No 2474/93
Commission Implementing Regulation (EU) 2023/611of 17 March 2023amending Regulation (EC) No 88/97 on the authorisation of the exemption of imports of certain bicycle parts originating in the People’s Republic of China from the extension by Council Regulation (EC) No 71/97 of the anti-dumping duty imposed by Council Regulation (EEC) No 2474/93 THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European UnionOJ L 176, 30.6.2016, p. 21. ("the basic Regulation"),Having regard to Council Regulation (EC) No 71/97 of 10 January 1997 extending the definitive anti-dumping duty imposed by Regulation (EEC) No 2474/93 on bicycles originating in the People’s Republic of China to imports of certain bicycle parts from the People’s Republic of China, and levying the extended duty on such imports registered under Regulation (EC) No 703/96OJ L 16, 18.1.1997, p. 55., and in particular Article 3 thereof,Whereas:(1)An anti-dumping duty ("the extended duty") currently applies on imports into the Union of essential bicycle parts originating in the People’s Republic of China ("the PRC") as a result of the extension by Regulation (EC) No 71/97.(2)Pursuant to Article 3 of Regulation (EC) No 71/97 an exemption scheme should be established in order to authorise the exemption of imports of essential bicycle parts which do not circumvent the anti-dumping duty ("the Exemption Scheme"). That Exemption Scheme is governed by Article 13(4) of the basic Regulation. The Exemption Scheme exempts assemblers that are found not to be engaged in practices circumventing the anti-dumping measure on bicycles to import Chinese bicycle parts free of anti-dumping duty.(3)The legal framework for operating the Exemption Scheme was provided for in Commission Regulation (EC) No 88/97Commission Regulation (EC) No 88/97 of 20 January 1997 on the authorisation of the exemption of imports of certain bicycle parts originating in the People’s Republic of China from the extension by Council Regulation (EC) No 71/97 of the anti-dumping duty imposed by Council Regulation (EEC) No 2474/93 (OJ L 17, 21.1.1997, p. 17). ("the Exemption Regulation") as amended by Regulation (EU) No 512/2013Commission Regulation (EU) No 512/2013 of 4 June 2013 amending Regulation (EC) No 88/97 on the authorisation of the exemption of imports of certain bicycle parts originating in the People’s Republic of China from the extension by Council Regulation (EC) No 71/97 of the anti-dumping duty imposed by Council Regulation (EEC) No 2474/93 (OJ L 152, 5.6.2013, p. 1)., Implementing Regulation (EU) 2015/831Commission Implementing Regulation (EU) 2015/831 of 28 May 2015 updating the list of parties exempted from the extended anti-dumping duty on certain bicycle parts originating in the People's Republic of China pursuant to Regulation (EC) No 88/97 following the screening initiated by Commission Notice 2014/C 299/08 (OJ L 132, 29.5.2015, p. 32). and Implementing Regulation (EU) 2020/1296Commission Implementing Regulation (EU) 2020/1296 of 16 September 2020 amending Regulation (EC) No 88/97 on the authorisation of the exemption of imports of certain bicycle parts originating in the People's Republic of China from the extension by Council Regulation (EC) No 71/97 of the anti-dumping duty imposed by Council Regulation (EEC) No 2474/93 (OJ L 303, 17.9.2020, p. 20)..(4)As provided for in recital (44) of Regulation (EC) No 71/97, the Commission keeps the exemption system constantly under review so that it can be adapted where necessary to take account of the experience acquired through the operation of that system.(5)The purpose of this Commission Implementing Regulation amending the Exemption Regulation is to adapt and improve the latter based on the most recent experiences and developments that occurred subsequent to the latest amendment by Implementing Regulation (EU) 2020/1296.(6)In order to enhance legal certainty and transparency, the definition of "assembler" should be added and other formal adjustments should be introduced to streamline the wording of the Exemption Regulation and update the references to other acts of the Union to their latest version, including the TARIC structure set out in Annex III.(7)Moreover, Annex I listing parties under examination pursuant to Article 6 of the exemption Regulation and Annex II listing parties exempted pursuant to Article 7 of the exemption Regulation should be updated. However, at the moment of the adoption of this Regulation the parties listed under TARIC additional code 8605, A576 and C009 are subject to re-assessment of the exemption authorisation granted to them respectively. The outcome of this re-assessment will be subject to a separate legal act.(8)Under the Exemption Scheme, as set out in Article 5(2) of the Exemption Regulation, the competent authorities of the Member States may make the suspension of payment of the extended duty subject to the provision of a guarantee of the extended duty. However, this provision is not compulsory and from the experience acquired through the implementation of the Exemption Scheme, the Commission notes that this creates potential problems of discrimination and gaps as regards enforcement of the provisions of the Exemption Regulation.(9)Against this background, the Commission considers it necessary to introduce a compulsory provision of a guarantee in case a suspension is granted ensuring equal treatment and proper enforcement.(10)Furthermore, when the applicant withdraws the request for exemption ("the request"), or the request is subsequently held inadmissible or rejected, the extended duty subject to suspension may not be recovered. In particular, the effects of the withdrawal of the request are not specifically regulated in the Exemption Regulation as amended. The Commission considers that the compulsory provision of the guarantee should ensure the recovery of the extended duty also in cases of subsequent inadmissibility, rejection and withdrawal of the request.(11)Moreover, the Commission considers it appropriate to regulate expressly the effects of the withdrawal of the request. Therefore, in case of withdrawal, the request should be considered not to have been lodged and the suspension of the payment of the extended duty should be lifted. This approach would be similar to Article 5(8) of the basic Regulation.(12)In conjunction therewith, the Commission further considers it appropriate to underline the provisional effects of the suspension, compared to the longer-term effects of the exemption. To this end, references to exemption should be coupled or replaced by references to suspension, where needed.(13)Having reviewed the experience acquired in operating the Exemption Scheme, the Commission considers it necessary to introduce certain amendments to ensure its proper functioning and enforcement.(14)Firstly, the Commission notes that the Exemption Regulation provides for the possibility to apply again for the Exemption Scheme after 12 months from the rejection of a request or from the revocation of the exemption. This timeframe is not long enough to align the assembly operation with the conditions to benefit from the Exemption Scheme, notably those listed in Articles 4, 5 and 8.(15)Therefore, the Exemption Regulation should provide for a longer timeframe of at least 36 months before an applicant can re-submit a request for exemption. Moreover, the 36-month foreclosure period should apply also in respect to requests rejected at the admissibility stage.(16)Furthermore, the Commission notes that it is essential to have the possibility to verify that exempted parties comply with anti-circumvention rules with respect to imports of essential bicycle parts.(17)Therefore, the Exemption Regulation should oblige exempted parties or parties under examination to keep record of the essential bicycle parts delivered to them, and of the use made of those parts, for a period longer than the 3 years currently provided, corresponding to at least 5 years. This timeframe would encompass the duration of anti-circumvention investigations and other proceedings in different policy areas, such as customs or anti-fraud proceedings.(18)With respect to enforcement, the Commission notes that, when a review of the exempted party is initiated, the exemption remains in place during the review proceedings. In case the exemption is revoked, the extended duty which has not been paid during the review cannot be recovered.(19)Therefore, in such a case, the Exemption Regulation should specify that the imports of essential bicycle parts of the parties under review should be subject to registration during the period the review investigation is carried out, pending the results of that review, to ensure that, should the review result in a revocation of the exemption, measures may subsequently be applied against those imports from the date of such registration.(20)The Commission further notes that, when an exempted party is found to be misdeclaring the Chinese origin of products, this has a direct impact on the compliance with the obligations of exempted parties, notably the obligations under Article 8 of the Exemption Regulation.(21)Therefore, in such instances, the Exemption Scheme should provide for the initiation of a review of the exemption granted to a party found to have misdeclared the Chinese origin of imported bicycle parts.(22)In addition, repeated customs misdeclarations of any bicycle parts by an exempted party should result in the revocation of the exemption.(23)An exemption should also be revoked when an exempted party is found to engage in practices circumventing the extended duty, inter alia, by undermining the remedial effects of the duty by importing significant quantities. Article 14(c) of the Exemption Regulation implies that the remedial effects of the duty will be undermined when 300 or more units per type of essential bicycle parts are either declared for free circulation by a party or are delivered to it.(24)To ensure legal certainty and transparency, this threshold should be made explicit in the Exemption Regulation.(25)The Commission further considers it appropriate to clarify the interpretation of the threshold established in Article 14(c). In this respect, the threshold of less than 300 units per type of essential bicycle parts on a monthly basis should refer to the monthly average of units per type of essential bicycle parts during periods of 12 months starting from the date of entry into force of the relevant end-use authorisation. In any case, the total of one or more periods cannot be longer than the validity period of the relevant end-use authorisation.(26)In relation to end-use authorisations granted by the relevant authorities of the Member States, the Commission notes that an exempted party which does not reach the threshold for the application of the Exemption Scheme mentioned above would still benefit from the exemption granted, despite not meeting one of the requirements for the admissibility of the request.(27)Therefore, the Exemption Regulation should allow for the revocation of exemptions for parties whose imports are below the threshold indicated in Article 14(c) of the Exemption Regulation.(28)Moreover, a party under examination can under the current rules apply for an end-use authorisation and benefit from both statuses, despite the fact that the two tools are mutually exclusive.(29)Therefore, the category of parties eligible for an end-use authorisation should exclude both an exempted party and a party under examination under the Exemption Scheme.(30)The Commission further considers it useful to recall that Regulation (EU) No 512/2013 as referred to in recital (3) clarified that bicycle parts used for the assembly of bicycles fitted with an auxiliary motor are subject neither to the anti-dumping duty nor to the extended anti-dumping duty and therefore, the assembly operations of such bicycles remain outside the scope of Regulation (EC) No 71/97 and consequently of the Exemption Regulation.(31)For reasons of legal certainty and in accordance with the procedures regulating implementing acts, including in trade defence proceedings, the Exemption Regulation should state that the decision concluding the review investigation should be a Commission regulation adopted in accordance with the examination procedure referred to in Article 5 of Regulation (EU) No 182/2011 of the European Parliament and of the CouncilRegulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission’s exercise of implementing powers (OJ L 55, 28.2.2011, p. 13)..(32)In accordance with the principle of sound administration, the amendments to the Exemption Regulation provided for in this Regulation are to apply as soon as possible to all new and to all pending investigations.(33)Regulation (EC) No 88/97 should therefore be amended accordingly.(34)The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 15(1) of the basic Regulation,HAS ADOPTED THIS REGULATION:
Article 1Regulation (EC) No 88/97 is amended as follows:(1)in Article 1, the definitions of "extended duty", "assembly operation" and "exempted party" are replaced by the following respectively:"—"extended duty" means the anti-dumping duty imposed by Regulation (EEC) No 2474/93, as extended by Article 2 of Regulation (EC) No 71/97 (hereinafter "the Reference Regulation"), and as maintained by subsequent Regulations,’"—"assembly operation" means an operation in which essential bicycle parts are brought in for the assembly or completion of bicycles or of bicycle parts,"‘—"exempted party" means any party whose assembly operations have been found to fall outside the scope of Article 13(2) of Regulation (EU) 2016/1036Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union (OJ L 176, 30.6.2016, p. 21)." and which has been exempted pursuant to Article 7 or 12 of this Regulation,
----------------------
Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union (OJ L 176, 30.6.2016, p. 21)."(2)the definition of "assembler" is added to Article 1 as follows:"—"assembler" means any party that performs an assembly operation,";(3)the definition of "the remedial effect of measures" is added to Article 1 as follows:"—"the remedial effects of the duty are being undermined", as referred to in Article 13(2)(c) of Regulation (EU) 2016/1036, in terms of quantities, means that, on a monthly basis, sales of the products resulting from the assembly operations exceed 299 bicycles or 299 units of a single type of essential bicycle parts.";(4)the title of Article 2 is replaced by the following:
"Article 2Exemption and suspension of imports from the extended duty";
(5)Article 2(2) is replaced by the following:"2.The payment of the extended duty on imports of essential bicycle parts shall be suspended where they are declared for free circulation by, or on behalf of, a party under examination.";(6)the address indicated in Article 3(1) is replaced by the following:"European CommissionDirectorate-General for TradeDirectorate G Trade DefenceRue de la Loi/Wetstraat 2001049 Bruxelles/BrusselBELGIQUE/BELGIËEmail: trade-bicycle-parts@ec.europa.eu";(7)Article 3(2) is replaced by the following:"2.Upon receipt of a request, the Commission shall acknowledge receipt forthwith.";(8)Article 4(1)(b) is replaced by the following:"(b)it provides prima facie evidence that the applicant’s assembly operations fall outside the scope of Article 13(2) of Regulation (EU) 2016/1036; and";(9)Article 4(1)(c) is replaced by the following:"(c)the applicant has not, within the 36 months preceding the request, been refused authorisation of exemption pursuant to this Article or Article 7(3) or (4), or had an exemption revoked pursuant to Article 10.";(10)Article 4(4) is replaced by the following:"4.Where a request is held inadmissible, it shall be rejected by a Decision in accordance with the procedure referred to in Article 13(4) of Regulation (EU) 2016/1036.";(11)Article 5 is replaced by the following:
"Article 5Suspension of payment of the duties1.As from the date of receipt of a request that has been declared admissible pursuant to Article 4, and pending a decision on its merits pursuant to Articles 6 and 7, payment of the customs debt in respect of the extended duty pursuant to Article 2(1) of the Reference Regulation shall be suspended in respect of any imports of essential bicycle parts declared for free circulation by the party under examination. A period of not less than 6 months prior to the receipt of the request is taken into consideration in order to establish prima facie compliance with the conditions set out in Article 4(1) and (2).2.The competent authorities of the Member States shall make the suspension of payment of the extended duty subject to the provision of a guarantee of the extended duty in accordance with Title III, chapter 2 of the Union Customs CodeRegulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).";, in the event that the request is subsequently held inadmissible pursuant to Article 4(4), withdrawn pursuant to Article 7(5), or rejected pursuant to Article 7(3) or (4).
----------------------
Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).";(12)Article 6(2) is replaced by the following:"2.Any party under examination shall ensure that, at any time, essential bicycle parts which it declares for free circulation are either used in its assembly operations, or assembly of other products, destroyed, or re-exported. It shall keep records of the essential bicycle parts delivered to it – and of the use made of them. These records shall be retained for 5 years from the date of suspension. The records and any necessary additional evidence and information shall be communicated to the Commission upon request.";(13)Article 7 is replaced by the following:
"Article 7Decision1.Where the facts as finally ascertained show that the applicant’s assembly operations do not fall within the scope of Article 13(2) of Regulation (EU) 2016/1036, the applicant’s exemption from the extended duty shall be authorised in accordance with the procedure referred to in Article 13(4) of Regulation (EU) 2016/1036.2.The decision shall have retroactive effect as from the date of receipt of the duly substantiated request referred to in Article 4(1). The applicant’s customs debt pursuant to Article 2(1) of the Reference Regulation shall be considered void from that date.3.Where the criteria for exemption are not fulfilled, the request shall be rejected in accordance with the procedure referred to in Article 13(4) of Regulation (EU) 2016/1036 and the suspension of the payment of the extended duty referred to in Article 5 shall be lifted.4.Any breach of obligations under Article 6(2) or any false declaration relating to a decision may constitute a reason for rejecting the request.5.Where a request for exemption is withdrawn, it shall be considered not to have been lodged and the suspension of the payment of the extended duty referred to in Article 5 shall be lifted.";
(14)Article 8(1)(a) is replaced by the following:"(a)its assembly operations remain outside the scope of Article 13(2) of Regulation (EU) 2016/1036;";(15)Article 8(2) is replaced by the following:"2.An exempted party shall keep records of the essential bicycle parts of which it receives deliveries and of the use made of them. It shall retain those records and appropriate supporting evidence for 5 years. Those records shall be made available to the Commission on request.";(16)Article 9 is replaced by the following:
"Article 9Review1.The Commission may on its own initiative review the situation of an exempted party to verify that it respects its obligations under Article 8, including any matters related thereto.2.A review shall consist of an examination covering a period which may be shorter than 6 months.3.A review shall be initiated by Commission regulation after informing Member States. As of the date of the initiation of the review, imports from the party under review shall be registered pursuant to Article 14(5) of the basic Regulation, to ensure that, should the review result in a revocation of the exemption, measures may subsequently be applied against those imports from the date of such registration.4.If an exempted party engages in customs misdeclaration of essential bicycle parts of Chinese origin, the Commission may initiate a review within the meaning of the first paragraph.5.Investigations shall be carried out by the Commission. The Commission may be assisted by customs authorities and the investigation shall be concluded by Commission regulation acting in accordance with the examination procedure referred to in Article 15(3) of Regulation (EU) 2016/1036.";
(17)Article 10 is replaced by the following:
"Article 10Revocation of an exemptionAn exemption shall be revoked in accordance with the procedure referred to in Article 13(4) of Regulation (EU) 2016/1036, after the exempted party has been given an opportunity to comment:where a review has shown that the exempted party’s assembly operations fall within the scope of Article 13(2) of Regulation (EU) 2016/1036, orwhere the exempted party is not using essential bicycle parts for the assembly operations in quantities above the threshold set out in Article 14(c), including where the party has been wound up or has otherwise ceased its assembly operations, orat any rate, in the event of a repeated customs misdeclaration of any bicycle part, orin the event of a breach of the party’s obligations pursuant to Article 8, orin the event of a lack of cooperation after the adoption of the exemption decision.";
(18)Article 13 is replaced by the following:
"Article 13Procedural provisionsThe relevant provisions of Regulation (EU) 2016/1036 concerning:the conduct of investigations (Article 6(2), (3), (4) and (5)),verification visits (Article 16),non-cooperation (Article 18), andconfidentiality (Article 19),shall apply to examinations pursuant to this Regulation."
;(19)the first paragraph of Article 14 is replaced by the following:"Where imports of essential bicycle parts are declared for free circulation by a person other than an exempted party or a party under examination pursuant to Article 5, as from the date of entry into force of the Reference Regulation, they shall be exempted from the application of the extended duty if declared in accordance with the TARIC structure in Annex III and subject to the conditions laid down in Article 254 of the Union Customs Code, which shall be applicable mutatis mutandis, where:";(20)Article 14(b) is replaced by the following:"(b)the essential bicycle parts are delivered to another holder of an authorisation for the end-use procedure within the meaning of Article 254 of the Union Customs Code; or";(21)the first sentence of Article 14(c) is replaced by the following:"on a monthly basis, less than 300 units per type of essential bicycle parts are, on average, either declared for free circulation by a party or are delivered to it. The time limit to calculate that average will not exceed 12 months, whereby the first period starts from the date of entry into force of the concerned end-use authorisation, and will in no case exceed its period of validity.";(22)Article 15(2) is replaced by the following:"2.Where the parties referred to in paragraph 1 are found to have declared for free circulation or received deliveries of quantities of essential bicycle parts above the threshold set out in Article 14(c), or where they fail to cooperate with the examination, they shall no longer be presumed to fall outside the scope of Article 13(2) of Regulation (EU) 2016/1036, and any exemption authorisation granted to such parties shall be revoked retrospectively. After the party concerned has been given an opportunity to comment, those findings shall be notified to the competent authorities of the Member States.";(23)in Article 15(3) the word "may" is replaced by "shall";(24)in Article 18 the word "Communities" is replaced by "Union";(25)Annexes I, II and III are replaced by Annexes I, II and III to this Regulation;(26)Annex IV is repealed.
Article 2This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply to all exempted parties as of its entry into force. For the avoidance of doubt, the obligations introduced pursuant to Article 1(15) only apply to records held by previously exempted parties 24 months after the entry into force of this Regulation.This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 17 March 2023.For the CommissionThe PresidentUrsula von der LesyenANNEX IParties under examination
TARIC additional codeNameAddressDate of effect
C557Berria Bike SLCalle Blasco de Garay 19,02600 Villarrobledo, Spain30.3.2022
C720Propain Bicycles GmbHSchachenstraße 39,88267 Vogt, Germany1.7.2021
C860Profil Bicycles CZ s.r.o.Hněvotín 31,783 47 Hněvotín, Czechia20.2.2022
C863Decathlon Sp. Z.o.o.ul. Geodezyjna 76,03-290 Warszawa, Poland21.3.2022
ANNEX IIUpdated list of exempted parties
TARIC additional codeNameAddressDate of effect
8005Gruppo Bici S.p.A.Via Pitagora 15,47521 Cesena (FO), Italy27.2.1998
8062Nikos Maniatopoulos S.A.Kosti Palama & Solonos,26504 Agios Vasileios-Patras, Greece22.1.1997
8065Arcade Cycles78 Impasse Philippe Gozola ZA Acti Est Parc Eco,85000 La Roche-sur-Yon, France27.1.1997
8068Cicli Esperia S.p.a.Viale Enzo Ferrari 8/10/1230014 Cavarzere (VE), Italy30.1.1997
8069Orbea S. Coop Ltd.Poligono Industrial Goitondo s/n,48269 Mallabia-Bizkaia, Spain31.1.1997
8071Yakari S.p.A.Via Kennedy 44,25028 Verolanuova (BS), Italy6.2.1997
8073Van den Berghe N.V.Industriepark noord 24,9100 Sint-Niklaas, Belgium11.2.1997
8075Alpina di Montevecchi Manolo & C. s.a.s.Via Archimede 485,47521 Cesena (FO), Italy13.2.1997
8078Jan Janssen Fietsen B.V.Voltweg 11,4631SR Hoogerheide, Netherlands19.2.1997
8079F.I.V. Edoardo Bianchi S.p.A.Via delle Battaglie 5,24047 Treviglio (BG), Italy20.2.1997
8080Etablissements Savoye et CieRue de l’industrie,01470 Serrières de Briord, France5.3.1997
8081Scout s.n.cVia Pogliano 36,20020 Lainate (MI), Italy6.3.1997
8082Órbita-BicicletasPortuguesas LdaRua da Fonta Nova 616, Povoa da Carvalha,3750-720 Recardães, Portugal12.3.1997
8083Établissements René Valdenaire S.A.Rue des Poncées,88200Saint-les-Remiremont, France13.3.1997
8084Schiano S.r.l.Via Viggiano 44,80020 Frattaminore (NA), Italy14.3.1997
8085Decathlon Produzione Italia S.r.l.Via Buonarroti 39,20145 Milano, Italy3.4.1997
8088Denver S.r.l.Via Primo Maggio 32,12025 Dronero (CN), Italy28.2.1997
8091Azor Bike B.V.Marconistraat 7a,7903AG Hoogeveen, Netherlands30.6.1997
8205Cicli Frera S.n.c. di Antonio e Vittorio Fontana & C.Viale dell’industria 6,35020 Arzergrande (PD), Italy18.2.1998
8296Inter bike – Importação e Exportação LdaZona Industrial de Vagos Lote 27, PO Box 132,3840 385 Vagos, Portugal17.6.1998
8328Giant Europe Manufacturing B.V.Pascallaan 66,8218 Lelystad, Netherlands10.7.1997
8330NV MinervaSchoebroekstraat 38,3583 Paal-Beringen, Belgium9.7.1997
8489Cycle-Union GmbHAn der Schmiede 4,26135 Oldenburg, Germany6.1.1998
8490ZPG GmbH & Co. KGLudwig-Hüttner Straße 5-7,95679 Waldershof, Germany16.3.1998
8491ThompsonLessensestraat 110,9500 Geraardsbergen, Belgium22.4.1998
8522Flanders NVDaalkouterlaan 1,9550 Herzele, Belgium30.9.1997
8523Ghost-Bikes GmbHAn der Tongrube 3,95652 Waldsassen, Germany19.9.1997
8524Kurt Gudereit GmbH & Co. KG FahrradfabrikAm Strebkamp 14,33607 Bielefeld, Germany22.9.1997
8604Giubilato Cicli S.r.l.Via Pavane 6/A,36065 Mussolente (VI), Italy27.11.2003
8605Cicli Elios S.r.l. (*)Via G. Ferraris 996/1030,45021 Badia Polesine (RO), Italy15.10.1998
8609Koninklijke Gazelle N.V.Wilhelminaweg 8,6951BP Dieren, Netherlands29.6.2005
8612Tecno Bike S.r.l.Via del Lavoro 22,61029 Canavaccio di Urbino (PU), Italy13.1.1999
8624Berg Toys B.V.Stevinlaan 2,6716WB Ede, Netherlands12.3.1999
8748All Bike’ s S.r.l.Via Caduti sul Don 15,12020 Villar S. Costanzo (CN), Italy28.10.1997
8749Bikkel Bikes Group B.V.Magnesiumstraat 45,6031RV Nederweert, Netherlands18.11.1997
8750Ludo N.V.Karel Van Miertstraat 7,3070 Kortenberg, Belgium24.11.1997
8767Planet’Fun S.A.les 4 chevaliers, Rond-point de la Republique,17180 Périgny, France12.2.1998
8768Cyclopodilatiki S.A.Minotaurou 16,54627 Thessaloniki, Greece9.2.1998
8973Fahrradfabrik Schauff GmbH & Co. KGWässerscheidt 56,53424 Remagen, Germany24.1.1997
8979W.S.B. Hi-Tech Bicycle Europe B.V.De Roef 15,9206AK Drachten, Netherlands5.2.1997
8981Olmo Giuseppe S.p.A.Via Poggi 22,17015 Celle Ligure (SV), Italy6.7.1998
8983Mandelli s.r.l.Via Tommaso Grossi 5,20841 Carate Brianza (MB), Italy12.2.1997
A045Simplon Fahrrad GmbHOberer Achdamm 22,6971 Hard, Austria29.9.1999
A087Bottecchia Cicli S.r.l.Viale Enzo Ferrari, 15/1730014 Cavarzere (VE), Italy10.8.2005
A088Cicli Adriatica S.r.l. UninominaleVia Toscana 13,61122 Pesaro (PS), Italy14.12.1999
A090Intersens Bikes & Parts B.V.Bedrijvenpark Twente 170,7602KE Almelo, Netherlands10.12.1999
A162Fratelli Zanoni S.r.l.Via Castiglioni 27,20010 Arluno (MI), Italy7.3.2000
A163Speedcross s.r.l.Corso Italia 20,20020 Vanzaghello (MI), Italy30.3.2000
A167Cicli Olympia S.r.l.Via Galileo Galilei 12/A,35028 Piove di Sacco (PD), Italy30.5.2000
A168EGC s.r.l.Corso Ventidue Marzo 32/1,20135 Milano (MI), Italy19.5.2000
A172Lenardon LidaVia Provinciale 5,33098 San Martino al Tagliamento (PN), Italy3.5.2000
A201Kokotis A. Bros S.A.5th klm of Larissa-Falani,41500 Larissa, Greece3.7.2000
A221GTA My Bicycle s.a.a.Via Borgo Rossi 22,35028 Piove di Sacco (PD), Italy5.12.2001
A227IKO Sportartikel Handels GmbHKufsteiner Strasse 72,83064 Raubling, Germany7.9.2000
A231Velomarche di Giunta Giancarlo & C. s.n.c.Via Piemonte 5/7,61022 fraz. Montecchio, Vallefoglia (PS), Italy13.12.2000
A232Fabbrica Biciclette Trubbiani S.r.l.Via Arno,1, Santa Maria in Selva,62010 Treia (MC), Italy3.1.2001
A233VICINI di Vicini Ottavio e Figli s.n.c.via dell’Artigianato 284,47521 Cesena (FO), Italy1.1.2000
A247AT Zweirad GmbHZur Steinkuhle 2,48341 Altenberge, Germany15.1.2001
A249F.A.R.A.M. S.r.l.Località Nucleo Industriale,02015 Cittaducale (RI), Italy22.2.2001
A271Cicli Lombardo S.p.A.Via Roma 223,91012 Buseto Palizollo (TP), Italy23.5.2001
A288Paul Lange & Co. OHGHofener Strasse 114,70372 Stuttgart, Germany27.4.2000
A320RGVS Ibérica Unipessoal LdaRua Central de Mandim- Barca, Castelo da Maia,4475-023 Maia, Portugal22.5.2001
A326Cicli Casadei S.r.l.Via dei Mestieri 23,44020 fraz. San Giuseppe, Comacchio (FE), Italy1.1.2002
A327Dino Bikes S.p.A.Via Cuneo 11,12011 Borgo San Dalmazzo (CN), Italy1.1.2002
A346Diamant Fahrradwerke GmbHSchönaicher Straße 1,09232 Hartmannsdorf, Germany1.9.2001
A359Biciclasse C.S. S.r.l.Localita’ Staglioni Area Industriale SNC,84020 Oliveto Citra (SA), Italy1.3.2002
A360G.F.M. Bike di Franco IngaraoContrada Consolazione,94011 Agira (EN), Italy18.3.2002
A377F.A.A.C. s.n.c. di Sbrissa F.lli & C.Via Monte Antelao 11,31037 Loria (TV), Italy23.4.2002
A384Toim S.L.Calle Rio Jarama 90, Poligono Industrial de Toledo45007 Toledo, Spain7.5.2002
A402Cicli Roveco di Veronese Paolo & C. s.a.s.Via Umberto I 508,45023 Costa Di Rovigo (RO), Italy12.1.2002
A403Telai Olagnero S.r.l.Strada Valle Maira 141,12020 Roccabruna (CN), Italy18.7.2002
A407Sangal – Indústria de Veículos LdaRua do Serrado, Apartado 21,3781-908 Sangalhos, Portugal15.10.2001
A412Atala S.p.A.Via della Guerrina 108,20900, Monza (MB), Italy23.9.2002
A413Norta N.V.Stradsestraat 39,2250 Olen, Belgium24.9.2002
A415Böttcher Fahrräder GmbHWaldstraße 3,25746 Wesseln, Germany7.3.2001
A432Star Due S.r.l.Via De Gasperi 55,31010 fraz. Coste, Maser (TV), Italy31.1.2003
A436Motomur S.L.Avda. Castillo de la asomada 6,30120 El Palmar (Murcia), Spain11.2.2003
A445Star Ciclo, Montagem Comercializaçaõ de Bicicletas LdaZona industrial de Barro 402,3750-353 Águeda, Portugal13.5.2003
A469Kettler Alu-Rad GmbHLongericher Straße 2,50739 Köln, Germany20.6.2003
A485SFM GmbHStrawinskystraße 27b,90455 Nürnberg, Germany4.6.2003
A487IMACYCLES – Acessorios Para Bicicletas e Motociclos LdaZona Industrial de Oiã, Apartado 117 Lote 5, Oiã3770 059 Oliveira do Bairro, Portugal25.9.2003
A500Bicicletas de Castilla y León S.L.Barrio Gimeno 5,09001 Burgos, Spain9.10.2003
A533Special Bike Società CooperativaVia Nizza 20,71042, Cerignola (FG), Italy22.1.2008
A534Accell Hunland Kft.Parkoló tér 1,5091 Tószeg, Hungary1.5.2004
A535BELVE s.r.o.Holubyho 295,916 01 Stará Turá, Slovakia4.5.2004
A536Bike Fun International s.r.o.Areál Tatry 1445/2,74221 Kopřivnice, Czechia1.5.2004
A537BPS Bicycle Industrial s.r.o.Šumavská 779/2,787 01 Šumperk, Czechia1.5.2004
A539IB Sp. z o.o. Zakład Pracy Chronionejul. Miłośników Podhala 1,34-425 Biały Dunajec, Poland1.5.2004
A540Ideal Europe Sp. z.o.o.Ul. Bohaterów walk nad bzurą 2,99-300 Kutno, Poland1.5.2004
A542Biuro Ekonomiczno-Handlowe Jan Zasada Sp. z o.o.ul. Fabryczna 6,98-300 Wieluń, Poland1.5.2004
A543KROSS S.A.ul. Leszno 46,06-300 Przasnysz, Poland1.5.2004
A545Neuzer Kerékpar Kereskedelmi és Szolgáltató Kft.Mátyás király u. 45,2500 Esztergom, Hungary1.5.2004
A546OLPRAN Spol. s.r.o.Libušina 526/101,772-11 Olomouc- Chválkovice, Czechia1.5.2004
A547UAB Baltik VairasPramonės g. 3,78138 Śiauliai, Lithuania1.5.2004
A548FHMM Sp. z o.o.ul. Ciecholowicka 29,55-120 Oborniki Śląskie, Poland1.5.2004
A551Kellys Bicycles s.r.o.Slnečná cesta 374,922 01 Veľké Orvište, Slovakia1.5.2004
A552Master Bike s.r.o.Sadová 2205/2,789 01 Zábřeh, Czechia1.5.2004
A553Novus Bike s.r.o.Vančurova 2985/20,746 01 Předměstí Opava, Czechia1.5.2004
A554Olimpia Kerékpár Kft.Ostorhegy u 4,1164 Budapest, Hungary1.5.2004
A555Csepel Bicycle Manufacturing and Sales Company LTDDuna Lejáró 7,1211 Budapest, Hungary1.5.2004
A556UNIBIKE K. Orłowska, P. Drobotowski Sp.J.ul. Przemysłowa 28B,85-758 Bydgoszcz, Poland1.5.2004
A557KENZEL s.r.o.Novozámocká 182,94701 Hurbanovo, Slovakia1.5.2004
A5584EVER s.r.o.Moravská 842, Butovice,742 13 Studénka, Czechia1.5.2004
A565Romet Sp. z o.o.Podgrodzie 32 C,39-200 Dębica, Poland1.6.2005
A566Zweirad PaulsenIndustriestraße 30,49565, Bramsche, Germany22.6.2004
A571Sprick Rowery Sp. z o.o.ul. Zachodnia 76,66-200 Świebodzin, Poland7.6.2004
A576N.V. Race Productions (*)Beverlosesteenweg 85,3583 Beringen, Belgium15.9.2004
A586Tolin Przedsiebiorstwo Prywatne Jerzy TopolskiŁeg Witoszyn 5a,87-811 Fabianki, Poland10.9.2004
A589Bike Mate s.r.o.Dlhá 248/43,905 01 Senica, Slovakia8.10.2004
A605Bohemia Bike a.s.Pujmanové 1753/10a Nusle,140 00 Praha 4, Czechia8.11.2004
A616Koliken MAGYAR-CSEH és SZLOVÁK Kereskedelmi Korlátolt Felelősségű TársaságSzéchenyi u. 103,6400 Kiskunhalas, Hungary8.11.2004
A630CULT d.o.o.Tržaška cesta 77,1370 Logatec, Slovenia24.1.2005
A662CREDAT Holding a.s.Priemyselný areál 3415,946 03 Kolárovo, Slovakia10.2.2005
A664Maxbike s.r.o.Svatoplukova 2771/1,700 30 Vitkovice, Ostrava, Czechia3.1.2005
A668PFIFF Vertriebs GmbHWilhelmstrasse 49-51,49610 Quakenbrück, Germany6.4.2005
A686Cycling Sports Group Europe B.V.Hanzepoort 27,7575DB Oldenzaal, Netherlands21.6.2005
A697Artur Nowak Firma Wielobranż Mexllerul. Romera 4/20,42-215 Częstochowa, Poland22.9.2005
A726Unibike OEM Factory S.A.Zona Industrial de Oiã Lote C21, Oiã3770 059 Oliveira do Barrio, Portugal10.11.2005
A730Alubike – Bicicletas S.A.Zona Industrial de Aveiro Sul, lote 11,Mamodeiro, Aveiro Concelho, Freguesia,3810 783 Aveiro, Portugal12.12.2005
A732Bonaventure BVBAStoomtuigstraat 16,8830 Hooglede, Belgium19.1.2006
A737Prestige Rijwielen N.V.Zuiderdijk 25,9230 Wetteren, Belgium16.2.2006
A745Skeppshultcykeln ABStorgatan 78,333 03 Skeppshult, Sweden29.3.2005
A746TRENGA DE Vertriebs GmbHGroßmoordamm 63-67,21079 Hamburg, Germany10.5.2006
A774Stevens Vertriebs GmbHAsbrookdamm 35,22115 Hamburg, Germany3.7.2006
A776Ing. Jaromír BřezinaFoglarova 2896/11,787 01 Šumperk, Czechia20.7.2006
A777Goldbike – Industria de Bicicletas LdaRua das Flores,3780 594 Poutena-Vilarinho do Bairro, Anadia, Portugal9.8.2006
A778Puky GmbH & Co. KGFortunastraße 11,42489 Wülfrath, Germany21.8.2006
A781Look Cycle International S.A.27 rue du Docteur Léveillé,58000 Nevers, France14.9.2006
A794TG Supplies GmbHGablonzer Straße 10,76185 Karlsruhe, Germany6.11.2006
A810CROSS LtdHadji Dimitar Street 1,3400 Montana, Bulgaria1.1.2007
A811Balkanvelo ADMizia Boulevard 1,5500 Lovech, Bulgaria1.1.2007
A812MaxcomGolyamokonarsko Shose Str. 1,4204 Tsaratsovo, Plovdiv, Bulgaria1.1.2007
A813Leader-96 LtdSedyanka 19,4003 Plovdiv, Bulgaria1.1.2007
A814Velomania LtdDimitar Nestorov Street bl. 120,1612 Sofia, Bulgaria1.1.2007
A815Robifir Bike Ltd.Kosta Bosilkov Street 3A,2700 Blagoevgrad, Bulgaria1.1.2007
A817Eurosport DHS SASantuhalm Street 35A,330004 Judet Hunedoara Deva, Romania1.1.2007
A824Fratelli Schiano S.r.l.Via Ferdinando Del Carretto 26,80133 Napoli, Italy31.1.2007
A825Helkama Velox OySantalantie 22,10960 Hanko Pohjoinen, Finland29.1.2007
A826Rijwielen en bromfietsen L’AvenirPosthoornstraat 1,2500 Lier, Belgium21.3.2007
A838KOVL spol. sroChoceradská 3042/20,14100 Praha 4, Czechia29.3.2007
A849Euro Bike Productsul. Ostrowska 498, 498A,61-324 Poznań, Poland6.8.2007
A850Radsportvertrieb Ditmar Bayer GmbHZum Acker 1,56244 Freirachdorf, Germany25.6.2007
A856Canyon Bicycles GmbHKarl-Tesche-Straße 12,56073 Koblenz, Germany4.12.2007
A894Winora Staiger GmbHMax-Planck-Straße 6,97526 Sennfeld, Germany19.1.1997
A896S.C. Madirom Prod S.r.l.Bd. Liviu Rebreanu nr. 130,300748 Timișoara, Timiș, Romania11.8.2008
A897ROSE Bikes GmbHSchersweide 4,46395 Bocholt, Germany16.9.2008
A963Wilier Triestina S.p.A.Via Fratel M. Venzo 11,36028 Rossano Veneto (VI), Italy3.11.2009
A966Skilledbike Sp. z o.o.Brzezna 420,33-386 Podegrodzie, Poland22.1.2010
A967Unicykel ABAröds Industriväg 14,422 43 Hisings Backa, Sweden11.1.2010
A968JETLANE S.A.S.4 boulevard de Mons,59650 Villeneuve d’Ascq, France18.2.2010
A970Sintema Sport S.r.l.Via delle Valli 7,20847 Albiate (MB), Italy22.2.2010
A979New Metelli di Metelli Maria Rosa & C. s.a.s.Via Trento 68,25030 Trenzano (BS), Italy13.4.2010
A984Blue Factory Team S.L.Calle Nicolás Copérnico 4, Elche Parque Empresarial,03203 Elche-Alicante, Spain16.7.2010
A991Maxtec LtdGolyamokonarsko shose Str. 1,4204 Tsaratsovo, Plovdiv, Bulgaria15.10.2010
A993Kwasny & Diekhöner GmbHHerforder Straße 331,33609 Bielefeld, Germany5.7.2011
B294Etablissements Th. Brasseur S.A.Rue des Steppes 13,4000 Liège, Belgium29.5.2012
B934C2g-engineering GmbHSchlesische Straße 27,10997, Berlin, Germany16.12.2013
B935Longway Poland Sp. z o.o.ul. Parzniewska 4a,05-800, Pruszków, Poland16.12.2013
B936BBF Bike GmbHCarena Allee 8,15366, Hoppegarten, Germany14.1.2014
B940Solo International OyKomeetankatu 1,02210 Espoo, Finland26.7.2013
B960In Cycles – Montagem e Comércio de Bicicletas LdaZona Industrial de Barrô Norte/Sul, N.o 976,Fracçao A/B e D, AP. 52,3750-353 Barrô Águeda, Portugal2.5.2014
B963Panex Dinamic d.o.o.Dr.Tome Bratkoviča 1,40000 Čakovec, Croatia13.8.2014
C001Cicli Europa S.r.l.34 Via Portella Bifuto,93017 San Cataldo (CL), Italy10.11.2014
C002OLYMPIQUE SARLZA Les Epalits,42610 Saint-Romain-le-Puy, France28.10.2014
C003Interbike Spólka z o.o.ul. Śląska 6/5,42-200 Częstochowa, Poland18.12.2014
C004Accell Nederland B.V.Industrieweg 4,8444AR Heerenveen, Netherlands20.4.1996
C005Cycles France LoireAvenue de l’industrie,42160 Saint-Cyprien, France20.4.1996
C006Cycles Lapierre6-10 Rue Edmond Voisenet,21000 Dijon Cedex, France28.1.1997
C007Cycleurope Industries161 Rue Gabriel Péri,10100 Romilly-sur-Seine, France20.4.1996
C008Cycleurope Sverige AB (mentioned as Monrak Crescent)c/o Monark AB,432 82 Varberg, Sweden19.1.1997
C009Derby Cycle Werke GmbH (*)Siemensstraße 1-3,49661 Cloppenburg, Germany19.1.1997
C010Engelbert Meyer GmbHHauptstraße 31,49692 Cappeln, Germany19.1.1997
C011Esmaltina – Auto ciclos S.A.Rua do Salgueiro 47,3780-103 Sangalhos, Portugal27.1.1997
C012Fratelli Masciaghi S.p.A.Via Gramsci 10,20900 Monza (MB), Italy29.1.1997
C013KTM Fahrrad GmbHHarlochner straß 13,5230 Mattighofen, Austria30.1.1997
C014Manufacture Française Du Cycle27 rue Marcel Brunelière,44270 Machecoul, France20.4.1996
C015MBM S.r.l.Via Emilia Levante 1671/73/75,47521 Cesena (FC), Italy29.1.1997
C016Montana S.r.l.Via Domenico Rossi 70,12060 Magliano Alpi (CN), Italy30.1.1997
C017Panther International GmbHAlter Postweg 190,32584 Löhne, Germany20.4.1996
C018Promiles4 Boulevard de Mons,59650 Villeneuve d’Ascq, France20.4.1996
C019Prophete GmbH & Co. KGLindenstrasse 50,33378 Rheda-Wiedenbrück, Germany19.1.1997
C020TNT Cycles S.L.C/Mosquerola 61-63,17180 Vilablareix (Girona), Spain19.1.1997
C021Kuisle & Kuisle GmbHGewerbe Straße 14,87675 Stötten, Germany17.2.2015
C053Trans- Rower Roman TylecDąbie 54d,39-311 Zdziarzec, Poland1.7.2015
C102Uno Bike B.V.Bovendijk 213,3045PD Rotterdam, Netherlands24.11.2015
C128Slavomir Sladek Velosprint STrnavská 40,949 01, Nitra, Slovakia14.4.2016
C202Vanmoof B.V.Mauritskade 55,1092AD Amsterdam, Netherlands1.1.2018
C307Merida Polska Sp. Z o.o.ul. M.C. Skłodowskiej 35,41-800 Zabrze, Poland14.6.2017
C311Juan Luna CabreraCalle Alhama 64,14900 Lucena (Cordoba), Spain4.10.2017
C481FJ Bikes Europe Unipessoal, LdaPraça do Município 8, Sala 1D,3750 111 Águeda, Portugal8.5.2018
C492MOTOKIT Veiculos e Acessórios LdaRua Alto do Vale do Grou 363750-870 Borralha/Águeda, Portugal25.9.2020
C527FIRMA ADAM Adam ZiętekMuchy 56,63-524 Czajków, Poland29.8.2019
C559Northtec sp. z.o.o.ul. Dworcowa 15a,43-502 Czechowice-Dziedzice, Poland27.7.2020
C560Giant Gyártó Hungary Kft.Jedlik Ányos utca 1,3200 Gyöngyös, Hungary15.7.2020
ANNEX IIITARIC structure
The rules for end-use control (Article 254 of Regulation No 952/2013) shall apply mutatis mutandis.The exempted parties whose assembly operations do not constitute circumvention since they fall outside the scope of Article 13(2) of Regulation (EU) 2016/1036 are the following: (see Annex II).The parties under examination concerning the criteria of Article 13(2) of Regulation (EU) 2016/1036, for which the anti-dumping duty is suspended pending a Commission decision and from which a security shall be requested by the competent authorities of the Member States, are the following: (see Annex I).
87149110– – – Frames:
– – – – Painted, anodized, polished and/or lacquered:
– – – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714911021– – – – – – Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)
8714911025– – – – – – Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)
8714911029– – – – – – Other
– – – – – Other
8714911031– – – – – – Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)
8714911035– – – – – – Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including e-bikes)
8714911039– – – – – – Other
– – – – Other
8714911070– – – – – Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including e-bikes)
8714911075– – – – – Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)
8714911089– – – – – Other
87149130– – – Front forks:
– – – – Painted, anodized, polished and/or lacquered:
– – – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; orto be transferred to another holder of an end–use authorisation or to exempted parties
8714913025– – – – – –Front forks, except rigid (non–telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)
8714913029– – – – – –Other
– – – – – Other
8714913035– – – – – –Front forks, except rigid (non–telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)
8714913039– – – – – –Other
– – – – Other
8714913072– – – – –Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)
8714913089– – – – –Other
– – – Free-wheel sprocket-wheels:
8714930011– – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714930019– – – – Other
– – – – Other brakes:
8714942091– – – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714942099– – – – – Other
87149490– – – Parts:
– – – – Brake levers:
8714949011– – – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714949019– – – – – Other
8714949090– – – – Other
87149630– – – Crank-gear:
8714963010– – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714963090– – – – Other
87149910– – – Handlebars:
– – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714991020– – – – – Bicycle handlebars:with or without integrated stem,either made out of carbon fibres and synthetic resin or made of aluminium, for use in the manufacture of bicycles (including electric bicycles)
8714991029– – – – – Other
– – – – Other
8714991089– – – – – Bicycle handlebars:with or without integrated stem,either made out of carbon fibres and synthetic resin or made of aluminium, for use in the manufacture of bicycles (including electric bicycles)
8714991099– – – – – Other
87149950– – – Derailleur gears:
– – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714995011– – – – – Derailleur gears, consisting of:rear derailleur and mounting articles,with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles)
8714995019– – – – – Other
– – – – Other
8714995091– – – – Derailleur gears, consisting of:rear derailleur and mounting articles,with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles)
8714995099– – – – – Other
87149990– – – Other, parts:
– – – – Complete wheels with or without tubes, tyres and sprockets:
8714999011– – – – – Originating in or consigned from China:in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month, orto be transferred to another holder of an end-use authorisation or to exempted parties
8714999019– – – – – Other
8714999030– – – – Seat posts, for use in the manufacture of bicycles (including electric bicycles)
8714999040– – – – Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)
8714999089– – – – Other