Commission Implementing Regulation (EU) 2020/1317 of 9 September 2020 concerning the classification of certain goods in the Combined Nomenclature
Commission Implementing Regulation (EU) 2020/1317of 9 September 2020concerning the classification of certain goods in the Combined Nomenclature THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs CodeOJ L 269, 10.10.2013, p. 1., and in particular Article 57(4) and Article 58(2) thereof,Whereas:(1)In order to ensure uniform application of the Combined Nomenclature annexed to Council Regulation (EEC) No 2658/87Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1)., it is necessary to adopt measures concerning the classification of the goods referred to in the Annex to this Regulation.(2)Regulation (EEC) No 2658/87 has laid down the general rules for the interpretation of the Combined Nomenclature. Those rules apply also to any other nomenclature which is wholly or partly based on it or which adds any additional subdivision to it and which is established by specific provisions of the Union, with a view to the application of tariff and other measures relating to trade in goods.(3)Pursuant to those general rules, the goods described in column (1) of the table set out in the Annex should be classified under the CN code indicated in column (2), by virtue of the reasons set out in column (3) of that table.(4)It is appropriate to provide that binding tariff information issued in respect of the goods concerned by this Regulation which does not conform to this Regulation may, for a certain period, continue to be invoked by the holder in accordance with Article 34(9) of Regulation (EU) No 952/2013. That period should be set at three months.(5)The measures provided for in this Regulation are in accordance with the opinion of the Customs Code Committee,HAS ADOPTED THIS REGULATION:
Article 1The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Article 2Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 34(9) of Regulation (EU) No 952/2013 for a period of three months from the date of entry into force of this Regulation.
Article 3This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 9 September 2020.For the Commission,On behalf of the President,Gerassimos ThomasDirector-GeneralDirectorate-General for Taxation and Customs UnionANNEX
Description of the goodsClassification (CN code)Reasons
(1)(2)(3)
1.A product consisting of free flowing porous prills predominantly based on ammonium nitrate with the following composition (in percentage by weight):ammonium nitrate > 99,4(total nitrogen > 34,5)anionic polymer 0,28coating 0,08The oil absorption of the prills is > 10 % by weight.The prills have a bulk density of 0,72 g/cm3.36020000Classification is determined by general rule 1 for the interpretation of the Combined Nomenclature and the wording of CN code 36020000.The anionic polymer is added to give the product a lower density and a higher capacity for oil absorption, which are important characteristics to allow the porous prills to be more suitable as a base material for the manufacture of ANFO (Ammonium Nitrate Fuel Oil) explosives.The surface treatment of the porous prills by coating is done to stabilise the ammonium nitrate and thereby avoid undesirable water absorption that could undermine/diminish the capacity to absorb fuel oil, which is one of the essential characteristics of an efficient ANFO explosive.Based on its objective characteristics, the product is thus identifiable as a prepared explosive under heading 3602 (see also the Harmonized System classification opinion 3602.00/2).Classification under heading 3102 is excluded because the product has been specifically prepared and formulated to be used as a base material for explosives. Neither the anionic polymer nor the coating are technically relevant for use as a fertiliser. The conditions of Note 2 to Chapter 31 are therefore not fulfilled.Consequently, the product is to be classified under CN code 36020000 as prepared explosives, other than propellent powders.
2.product consisting of free flowing porous prills predominantly based on ammonium nitrate with the following composition (in percentage by weight):ammonium nitrate > 99(total nitrogen > 34,5)magnesium nitrate 0,4mixture of diammonium phosphate, ammonium sulphate and boric acid 0,06coating 0,08The oil absorption of the prills is > 7 % by weight.The prills have a bulk density of 0,80 g/cm3.36020000Classification is determined by general rule 1 for the interpretation of the Combined Nomenclature and the wording of CN code 36020000.The mixture of diammonium phosphate, ammonium sulphate and boric acid is added to give the product a lower density and a higher capacity for oil absorption, which are important characteristics to allow the porous prills to be more suitable as a base material for the manufacture of ANFO explosives.The surface treatment of the porous prills by coating is done to stabilise the ammonium nitrate and thereby avoid undesirable water absorption that could undermine/diminish the capacity to absorb fuel oil, which is one of the essential characteristics of an efficient ANFO explosives.Based on its objective characteristics, the product is thus identifiable as a prepared explosive under heading 3602 (see also the Harmonized System classification opinion 3602.00/1).Classification under heading 3102 is excluded because the product has been specifically prepared and formulated to be used as a base material for explosives. Neither the various additives nor the coating are technically relevant for use of this prepared ammonium nitrate as a fertiliser. The conditions of Note 2 to Chapter 31 are therefore not fulfilled.Consequently, the product is to be classified under CN code 36020000 as prepared explosives, other than propellent powders.