Commission Implementing Regulation (EU) 2020/1147 of 31 July 2020 granting a Union authorisation for the single biocidal product ‘ClearKlens product based on IPA’ (Text with EEA relevance)
Commission Implementing Regulation (EU) 2020/1147of 31 July 2020granting a Union authorisation for the single biocidal product ClearKlens product based on IPA(Text with EEA relevance) THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal productsOJ L 167, 27.6.2012, p. 1., and in particular the first subparagraph of Article 44(5) thereof,Whereas:(1)On 26 May 2016, Diversey Europe Operations B.V. submitted an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 for authorisation of a single biocidal product named "ClearKlens product based on IPA" of product-type 2, as described in Annex V to that Regulation, providing written confirmation that the competent authority of the Netherlands had agreed to evaluate the application. The application was recorded under case number BC-HD024462-61 in the Register for Biocidal Products.(2)"ClearKlens product based on IPA" contains propan-2-ol, as the active substance, which is included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012.(3)On 3 June 2019, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the European Chemicals Agency ("the Agency").(4)On 17 January 2020, the Agency submitted to the Commission an opinionECHA opinion of 11 December 2019 on the Union authorisation of "ClearKlens product based on IPA" (ECHA/BPC/236/2019)., the draft summary of the biocidal product characteristics ("SPC") of "ClearKlens product based on IPA" and the final assessment report on the single biocidal product in accordance with Article 44(3) of Regulation (EU) No 528/2012.(5)The opinion concludes that "ClearKlens product based on IPA" is a "single biocidal product" within the meaning of Article 3(1)(r) of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(1) of that Regulation.(6)On 3 February 2020, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.(7)The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for "ClearKlens product based on IPA".(8)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,HAS ADOPTED THIS REGULATION:
Article 1A Union authorisation with authorisation number EU-0022128-0000 is granted to Diversey Europe Operations B.V. for the making available on the market and use of the single biocidal product "ClearKlens product based on IPA" in accordance with the summary of the biocidal product characteristics set out in the Annex.The Union authorisation is valid from 24 August 2020 until 31 July 2030.
Article 2This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 31 July 2020.For the CommissionThe PresidentUrsula von der LeyenANNEXSummary of product characteristics for a biocidal productClearKlens product based on IPAProduct type 2 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)Authorisation number: EU-0022128-0000R4BP asset number: EU-0022128-00001.ADMINISTRATIVE INFORMATION1.1.Trade name(s) of the product
Trade name(s)ClearKlens IPAClearKlens IPA 70 %ClearKlens IPA 70 % v/vClearKlens IPA VH1ClearKlens IPA AirlessClearKlens IPA PouchClearKlens IPA Non SterileClearKlens IPA Non Sterile VH1ClearKlens IPA SSClearKlens IPA SS VH1ClearKlens IPA RTUClearKlens IPA RTU VH1Texwipe® Sterile 70 % IsopropanolVH01 ClearKlens IPA
1.2.Authorisation holder
Name and address of the authorisation holderNameDiversey Europe Operations B.V.
AddressMaarssenbroeksedijk 2, 3542 DN, Utrecht, Netherlands
Authorisation numberEU-0022128-0000
R4BP asset numberEU-0022128-0000
Date of the authorisation24.8.2020
Expiry date of the authorisation31.7.2030
1.3.Manufacturer(s) of the product
Name of manufacturerDiversey Europe Operations B.V.
Address of manufacturerMaarssenbroeksedijk 2, 3542 DN Utrecht Netherlands
Location of manufacturing sitesAvenida Conde Duque 5, 7 y 9; Poligono Industrial La Postura, 28343 Valdemoro (Madrid) SpainStrada Statale 235, 26010 Bagnolo Cremasco (CR) ItalyCotes Park Industrial Estate, DE55 4PA Somercotes Alfreton United KingdomRembrandtlaan 414, 7545 ZW Enschede NetherlandsMorschheimer Strasse 12, 67292 Kirchheimbolanden Germany
Name of manufacturerMultifill BV
Address of manufacturerConstructieweg 25a, 3640 AJ Mijdrecht Netherlands
Location of manufacturing sitesConstructieweg 25a, 3640 AJ Mijdrecht Netherlands
Name of manufacturerFlexible Medical Packaging Ltd
Address of manufacturerUnit 8, Hightown, White Cross Industrial Estate, LA1 4XS Lancaster, Lancashire United Kingdom
Location of manufacturing sitesUnit 8, Hightown, White Cross Industrial Estate, LA1 4XS Lancaster, Lancashire United Kingdom
Name of manufacturerArdepharm
Address of manufacturerLes Iles Ferays, 07300 Tournon-sur-Rhône France
Location of manufacturing sitesLes Iles Ferays, 07300 Tournon-sur-Rhône France
Name of manufacturerEntegris Cleaning Process (ECP) S.A.S
Address of manufacturer395 rue Louis Lépine, 34000 Montpellier France
Location of manufacturing sites395 rue Louis Lépine, 34000 Montpellier France
1.4.Manufacturer(s) of the active substance(s)
Active substancePropan-2-ol
Name of manufacturerINEOS Solvents GmbH
Address of manufacturerAnckelmannsplatz, D-20537 Hamburg Germany
Location of manufacturing sitesShamrockstrasse 88, D-44623 Herne GermanyRömerstrasse 733, D-47443 Moers Germany
Active substancePropan-2-ol
Name of manufacturerShell Chemicals Europe B.V.
Address of manufacturerPostbus 2334, 3000 CH Rotterdam Netherlands
Location of manufacturing sitesVondelingenweg 601, 3196 KK Rotterdam-Pernis Netherlands
Active substancePropan-2-ol
Name of manufacturerExxon Mobil Chemicals
Address of manufacturerHermeslaan 2, 1831 Machelen Belgium
Location of manufacturing sites4045 Scenic Highway, LA 70805 Baton Rouge United StatesSouthampton, SO45 1TX Hampshire United Kingdom
2.PRODUCT COMPOSITION AND FORMULATION2.1.Qualitative and quantitative information on the composition of the product
Common nameIUPAC nameFunctionCAS numberEC numberContent (%)
Propan-2-olActive Substance67-63-0200-661-763,1
2.2.Type of formulationAL – Any other liquid3.HAZARD AND PRECAUTIONARY STATEMENTS
Hazard statementsHighly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statementsKeep away from heat, hot surfaces, sparks, open flames and other ignition sources. – No smoking.Avoid breathing spray.Wash hands thoroughly after handling.Store in a well-ventilated place. Keep cool.Dispose of contents in accordance with local regulations.Dispose of container in accordance with local regulations.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.In case of fire: Use alcohol-resistant foam to extinguish.
4.AUTHORISED USE(S)4.1.Use descriptionTable 1. Use # 1 – PT02: Non-porous hard surface disinfectant – professionals – mopping
Product typePT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised useNot relevant
Target organism(s) (including development stage)BacteriaYeasts
Field(s) of useIndoorReady to use product for the disinfection of cleaned non-porous hard surfaces in pharmaceutical and cosmetics manufacturing facilities with air change rate of 60 per hour or more and in clean rooms with air change rate of 150 per hour or more.
Application method(s)Disinfection using a mop—
Application rate(s) and frequencyApply 18,4 mL product/m2 surface.
Category(ies) of usersProfessional
Pack sizes and packaging materialContainers (High Density PolyEthylene (HDPE), Polypropylene (PP), Polyethylene (PE)): 1–20 L
4.1.1.Use-specific instructions for useReady to use product for the disinfection of non-porous hard surfaces.Clean and dry the surface before disinfection. Wet the mop with the disinfectant and mop the surface. Wet the surface completely. Allow to take effect for at least 30 seconds.Used mops must be stored in a closed container.4.1.2.Use-specific risk mitigation measuresApply the product only in a sufficiently ventilated room. The minimum air change rates required are:60/h in pharmaceutical and cosmetics manufacturing facilities,150/h in cleanrooms.Do not use more than 18,4 mL product/m2.4.1.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.1.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.1.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.4.2.Use descriptionTable 2. Use # 2 – PT02: Non-porous hard surface disinfectant – professionals – cloth
Product typePT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised useNot relevant
Target organism(s) (including development stage)BacteriaYeasts
Field(s) of useIndoorReady to use product for the disinfection of cleaned non-porous hard surfaces in laboratories with air change rate of 8 per hour or more, in pharmaceutical and cosmetics manufacturing facilities with air change rate of 60 per hour or more and in clean rooms with air change rate of 150 per hour or more.
Application method(s)Disinfection using a cloth
Application rate(s) and frequencyApply 18,4 mL product/m2 surface.
Category(ies) of usersProfessional
Pack sizes and packaging materialContainers (High Density PolyEthylene (HDPE), Polypropylene (PP), Polyethylene (PE)): 1–20 LContainers (HDPE, PP, PE) with a pump: 200 L (cleanroom only)Intermediate bulk containers (IBCs) with a pump (HDPE, PP, PE): 950 and 1000 L (cleanroom only)
4.2.1.Use-specific instructions for useReady to use product for the disinfection of non-porous hard surfaces.Clean and dry the surface before disinfection. Wet the cloth with the disinfectant and wipe the surface. Wet the surface completely. Allow to take effect for at least 30 seconds. In cleanrooms, the exact amount of required product can also be dispensed either using a low flow-rate spray lance or into a bucket via a system of pipes. Used cloths must be disposed of in a closed container.4.2.2.Use-specific risk mitigation measuresApply the product only in a sufficiently ventilated room. The minimum air change rates required are8/h in laboratories,60/h in pharmaceutical and cosmetics manufacturing facilities,150/h in cleanrooms.Do not use more than 18,4 mL product/m2.The following personal risk mitigation measure can be applied for wiping disinfection unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.4.2.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.2.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.2.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.4.3.Use descriptionTable 3. Use # 3 – PT02: Non-porous hard surface disinfectant – professionals – spraying
Product typePT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised useNot relevant
Target organism(s) (including development stage)BacteriaYeasts
Field(s) of useIndoorReady to use product for the disinfection of cleaned non-porous hard surfaces in laboratories with air change rate of 8 per hour or more, in pharmaceutical and cosmetics manufacturing facilities with air change rate of 60 per hour or more and in clean rooms with air change rate of 8, 60 or 150 per hour or more.
Application method(s)Disinfection using a trigger sprayWiping optional to spread the product.
Application rate(s) and frequencyApply 18,4 mL product/m2 surface.
Category(ies) of usersProfessional
Pack sizes and packaging materialTrigger spray pouch (PE): 0,9 – 20 LBag in bottle (multilayer coextruded five-layerEthylene vinyl acetate (EVA)/EVA/Polyvinylidene dichloride (PVDC)/EVA/EVA bag in a HDPE, PP or PE bottle): 0,9–2 LTrigger Spray bottle (HDPE, PP, PE): 0,5–1,5 LAirless trigger spray bottle (Low-density polyethylene (LDPE)): 0,25–1L
4.3.1.Use-specific instructions for useReady to use product for the disinfection of non-porous hard surfaces.Clean and dry the surface before disinfection. Spray the surface, wipe if necessary to spread the product. Wet the surface completely. Allow to take effect for at least 30 seconds. Used cloths must be disposed in a closed container.Number of applications per type of packaging, necessary to obtain an application rate of 18,4 mL product/m2 surface:Trigger spray pouch: apply 19 sprays/m2 surface,Sterile trigger (bag in bottle): apply 16 sprays/m2 surface,Trigger spray bottle: apply 14 sprays/m2 surface,Airless trigger spray bottle: apply 21 sprays/m2 surface.4.3.2.Use-specific risk mitigation measuresApply the product only in a sufficiently ventilated room. The minimum air change rates required are8/h in laboratories,60/h in pharmaceutical and cosmetics manufacturing facilities,150/h in cleanrooms.Do not use more than 18,4 mL product/m2.4.3.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.3.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.3.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.4.4.Use descriptionTable 4. Use # 4 – PT02: Non-porous glove disinfectant – professionals – non-porous glove disinfection
Product typePT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised useNot relevant
Target organism(s) (including development stage)BacteriaYeasts
Field(s) of useIndoorReady to use product for the disinfection of clean non-porous gloves in laboratories with air change rate of 8 per hour or more, in pharmaceutical and cosmetics manufacturing facilities with air change rate of 60 per hour or more and in clean rooms with air change rate of 150 per hour or more.
Application method(s)Disinfection of non-porous gloves
Application rate(s) and frequencyApply 3 mL of product to gloved hands.
Category(ies) of usersProfessional
Pack sizes and packaging materialAutomatic dosing:Containers (HDPE, PP, PE): 1–20 LContainers (HDPE, PP, PE) with a pump: 200 L (cleanrooms only)IBCs with a pump (HDPE, PP, PE): 950 and 1000 L (cleanrooms only)Manual dosing:Trigger spray pouch (PE): 0,9–20 LBag in bottle (multilayer coextruded five-layer EVA/EVA/PVDC/EVA/EVA bag in a HDPE, PP or PE bottle): 0,9–2 LTrigger spray bottle (HDPE, PP, PE): 0,5–1,5 LAirless trigger spray bottle (LDPE): 0,25–1 L
4.4.1.Use-specific instructions for useReady to use product for the disinfection of non-porous gloves.Automatic and manual dosing:Apply 3 mL of the product directly on clean gloved hands, distribute evenly and make sure to wet the surface completely. Allow to take effect for at least 30 seconds.Number of applications per type of packaging, necessary to apply 3 mL of product on clean gloved hands:Trigger spray pouch: apply 3 sprays of the product on two hands,Sterile trigger (bag in bottle): apply 3 sprays of the product on two hands,Trigger spray bottle: apply 3 sprays of the product on two hands,Airless trigger spray bottle: apply 4 sprays of the product on two hands.4.4.2.Use-specific risk mitigation measuresApply the product only in a sufficiently ventilated room. The minimum air change rates required are8/h in laboratories,60/h in pharmaceutical and cosmetics manufacturing facilities,150/h in cleanrooms.4.4.3.Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentSee general directions for use.4.4.4.Where specific to the use, the instructions for safe disposal of the product and its packagingSee general directions for use.4.4.5.Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storageSee general directions for use.5.GENERAL DIRECTIONS FOR USEInstructions for use, risk mitigation measures and other directions for use under this section are valid for all authorised uses.5.1.Instructions for useSee use specific instructions.5.2.Risk mitigation measuresWear new protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information).Avoid contact with eyes.5.3.Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environmentInhalation: May cause drowsiness or dizziness.Eye contact: Causes severe irritation.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE, doctor or physician if you feel unwell.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation occurs and persists, get medical attention.IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Get medical attention or advice if you feel unwell.Environmental precautions:The product should not reach sewage water or drainage ditch undiluted or unneutralised.Do not allow the product to enter drainage system, surface or ground water. Dilute with plenty of water.Methods and material for containment and cleaning up. Absorb the product with liquid-binding material (sand, diatomite, universal binders, sawdust).5.4.Instructions for safe disposal of the product and its packagingThe product and its container must be disposed of in a safe way, in compliance with any relevant legislation on the disposal of hazardous waste. Dispose of or incinerate in accordance with the local regulations.5.5.Conditions of storage and shelf-life of the product under normal conditions of storage2 years shelf-life.Keep only in original packaging.Store away from direct sunlight and below 30 °C.Store in a closed container.6.OTHER INFORMATIONThe product contains propan-2-ol (CAS No: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.