Common Name,Identification Numbers | IUPAC Name | Purity | Date of approval | Expiration of approval | Specific provisions |
---|
Phlebiopsis gigantea strain VRA 1835 | Not applicable | No relevant impurities | 1 September 2020 | 31 August 2035 | For the implementation of the uniform principles, as referred to in Article 29(6) of Regulation (EC) No 1107/2009, the conclusions of the renewal report on Phlebiopsis gigantea strain VRA 1835, and in particular Appendices I and II thereto, shall be taken into account.Member States shall pay particular attention to the protection of operators and workers.Producers shall ensure strict maintenance of environmental conditions and quality control analysis during the manufacturing process as laid down in Working Document SANCO/12116/2012 as regards the limits on microbiological contamination. |
Phlebiopsis gigantea strain VRA 1984 | Not applicable | No relevant impurities | 1 September 2020 | 31 August 2035 | For the implementation of the uniform principles, as referred to in Article 29(6) of Regulation (EC) No 1107/2009, the conclusions of the renewal report on Phlebiopsis gigantea strain VRA 1984, and in particular Appendices I and II thereto, shall be taken into account.Member States shall pay particular attention to the protection of operators and workers.Producers shall ensure strict maintenance of environmental conditions and quality control analysis during the manufacturing process as laid down in Working Document SANCO/12116/2012 as regards the limits on microbiological contamination. |
Phlebiopsis gigantea strain FOC PG 410.3 | Not applicable | No relevant impurities | 1 September 2020 | 31 August 2035 | For the implementation of the uniform principles, as referred to in Article 29(6) of Regulation (EC) No 1107/2009, the conclusions of the renewal report on Phlebiopsis gigantea strain FOC PG 410.3, and in particular Appendices I and II thereto, shall be taken into account.Member States shall pay particular attention to the protection of operators and workers.Producers shall ensure strict maintenance of environmental conditions and quality control analysis during the manufacturing process as laid down in Working Document SANCO/12116/2012 as regards the limits on microbiological contamination. |