(a) dishwashers in the scope of Directive 2006/42/EC; (b) battery-operated household dishwashers that can be connected to the mains through an AC/DC converter purchased separately.
Commission Regulation (EU) 2019/2022 of 1 October 2019 laying down ecodesign requirements for household dishwashers pursuant to Directive 2009/125/EC of the European Parliament and of the Council amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1016/2010 (Text with EEA relevance.)
Modified by
- Commission Regulation (EU) 2021/341of 23 February 2021amending Regulations (EU) 2019/424, (EU) 2019/1781, (EU) 2019/2019, (EU) 2019/2020, (EU) 2019/2021, (EU) 2019/2022, (EU) 2019/2023 and (EU) 2019/2024 with regard to ecodesign requirements for servers and data storage products, electric motors and variable speed drives, refrigerating appliances, light sources and separate control gears, electronic displays, household dishwashers, household washing machines and household washer-dryers and refrigerating appliances with a direct sales function(Text with EEA relevance), 32021R0341, February 26, 2021
(1) "mains" or "electric mains" means the electricity supply from the grid of 230 (± 10 %) volts of alternating current at 50 Hz; (2) "household dishwasher" means a machine which cleans and rinses tableware, and which is declared by the manufacturer in the Declaration of Conformity to comply with Directive 2014/35/EU of the European Parliament and of the Council Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (OJ L 96, 29.3.2014, p. 357 ).Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (OJ L 153, 22.5.2014, p. 62 ).(3) "built-in household dishwasher" means a household dishwasher that is designed, tested and marketed exclusively: (a) to be installed in cabinetry or encased (top, bottom and sides) by panels; (b) to be securely fastened to the sides, top or floor of the cabinetry or panels; and (c) to be equipped with an integral factory-finished face or to be fitted with a custom front panel;
(4) "equivalent model" means a model which has the same technical characteristics relevant for the technical information to be provided, but which is placed on the market or put into service by the same manufacturer, importer or authorised representative as another model with a different model identifier; (5) "model identifier" means the code, usually alphanumeric, which distinguishes a specific product model from other models with the same trade mark or the same manufacturer's, importer's or authorised representative's name; (6) "product database" means a collection of data concerning products, which is arranged in a systematic manner and consists of a consumer-oriented public part, where information concerning individual product parameters is accessible by electronic means, an online portal for accessibility and a compliance part, with clearly specified accessibility and security requirements, as laid down in Regulation (EU) 2017/1369; (7) "programme" means a series of operations that are pre-defined and are declared by the manufacturer, importer or authorised representative as suitable for specified levels of soil or types of load, or both; (8) "eco" means the name of the programme of a household dishwasher declared by the manufacturer, importer or authorised representative as suitable to clean normally soiled tableware, and to which the ecodesign requirements on energy efficiency, cleaning and drying performance relate.
(a) from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different manufacturer; or (b) by calculation on the basis of design or extrapolation from another model of the same or a different manufacturer, or both;
(a) the improvement potential with regard to energy and environmental performance of household dishwashers, taking into account, inter alia, drying performance; (b) the level of verification tolerances; (c) an assessment of the evolution of consumer behaviour and of the penetration rate of household dishwashers in EU Member States; (d) the effectiveness of existing requirements on resource efficiency; (e) the appropriateness of setting additional resource efficiency requirements for products in accordance with the objectives of the circular economy, including whether more spare parts should be included.
(1) "Energy Efficiency Index" (EEI) means the ratio of the eco programme energy consumption to the standard programme energy consumption; (2) "eco programme energy consumption" (EPEC) means the energy consumption of a household dishwasher for the eco programme, expressed in kilowatt hour per cycle; (3) "standard programme energy consumption" (SPEC) means the energy consumption taken as a reference as a function of the rated capacity, expressed in kilowatt hour per cycle; (4) "place setting" (ps) means a set of tableware for use by one person, not including serving pieces; (5) "serving pieces" means items for the preparation and serving of food which can include pots, serving bowls, serving cutlery and a platter; (6) "rated capacity" means the maximum number of place settings together with the serving pieces, which can be cleaned, rinsed and dried in a household dishwasher in one cycle when loaded in accordance with the manufacturer’s, importer’s or authorised representative’s instructions; (7) "cleaning performance index" (I C ) means the ratio of the cleaning performance of a household dishwasher to the cleaning performance of a reference household dishwasher;(8) "drying performance index" (I D ) means the ratio of the drying performance of a household dishwasher to the drying performance of a reference household dishwasher;(9) "programme duration" (T t ) means the length of time beginning with the initiation of the programme selected, excluding any user programmed delay, until the end of the programme is indicated and the user has access to the load;(10) "cycle" means a complete cleaning, rinsing and drying process, as defined by the programme selected, consisting of a series of operations until all activity ceases; (11) "off mode" means a condition in which the household dishwasher is connected to the mains and is not providing any function; the following shall also be considered as off mode: (a) conditions providing only an indication of off mode; (b) conditions providing only functionalities intended to ensure electromagnetic compatibility pursuant to Directive 2014/30/EU of the European Parliament and of the Council Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (OJ L 96, 29.3.2014, p. 79 ).
(12) "standby mode" means a condition where the household dishwasher is connected to the mains, and provides only the following functions, which may persist for an indefinite time: (a) reactivation function, or reactivation function and a mere indication of enabled reactivation function; and/or (b) reactivation function through a connection to a network; and/or (c) information or status display; and/or (d) detection function for emergency measures;
(13) "network" means a communication infrastructure with a topology of links, an architecture, including the physical components, organisational principles, communication procedures and formats (protocols); (14) "delay start" means a condition where the user has selected a specified delay to the beginning of the cycle of the selected programme; (15) "spare part" means a separate part that can replace a part with the same or similar function in a product; (16) "professional repairer" means an operator or undertaking which provides services of repair and professional maintenance of household dishwashers; (17) "eco programme water consumption" (EPWC) means the water consumption of a household dishwasher for the eco programme, expressed in litres per cycle; (18) "guarantee" means any undertaking by the retailer or a manufacturer to the consumer to: (a) reimburse the price paid; or (b) replace, repair or handle household dishwashers in any way if they do not meet the specifications set out in the guarantee statement or in the relevant advertising;
(19) "declared values" means the values provided by the manufacturer, importer or authorised representative for the stated, calculated or measured technical parameters in accordance with Article 4, for the verification of compliance by the Member State authorities.
(a) this programme shall be: named "eco" on the programme selection device of the household dishwasher, on the household dishwasher display, if any, and on the relevant network application, if any, set as the default programme for household dishwashers equipped with automatic programme selection or any function maintaining the selection of a programme, or, if there is no automatic programme selection, available for direct selection without the need for any other selection such as a specific temperature or load;
(b) the name "eco" shall be used exclusively for this programme. The formatting of "eco" is not restricted in terms of font, font size, case sensitivity or colour. The only other additional information which may be combined with the term "eco" is the temperature of the eco programme; (c) the indications "normal", "daily", "regular" and "standard", and their translations in all EU official languages, shall not be used in programme names for the household dishwasher, neither alone nor in combination with other information.
(a) the Energy Efficiency Index (EEI) shall be less than 63.
(b) the EEI shall be less than 56 for household dishwashers with a rated capacity equal to or more than 10 place settings.
(a) the cleaning performance index (I C ) shall be greater than1,12 ;(b) the drying performance index (I D ) shall be greater than1,06 for household dishwashers with a rated capacity of more than 7 place settings;(c) the drying performance index (I D ) shall be greater than0,86 for household dishwashers with a rated capacity equal to or less than 7 place settings.
(a) household dishwashers shall have an off mode or a standby mode or both. The power consumption of these modes shall not exceed 0,50 W;(b) if the standby mode includes the display of information or status, the power consumption of this mode shall not exceed 1,00 W;(c) if the standby mode provides for a connection to a network and provides networked standby as defined in Commission Regulation (EU) No 801/2013 Commission Regulation (EU) No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment, and amending Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions (OJ L 225, 23.8.2013, p. 1 ).2,00 W;(d) at the latest 15 minutes after the household dishwasher has been switched on or after the end of any programme and associated activities or after any interaction with the equipment, if no other mode, including emergency measures, is triggered, the equipment shall switch automatically to off mode or standby mode; (e) if the household dishwasher provides for a delay start, the power consumption in this condition, including any standby mode, shall not exceed 4,00 W. The delay start shall not be programmable by the user for more than 24 h;(f) any household dishwasher that can be connected to a network shall provide the possibility to activate and deactivate the network connection. The network connection shall be deactivated by default.
(1) availability of spare parts: (a) the manufacturers, importers or authorised representatives of household dishwashers shall make available to professional repairers at least the following spare parts, for a minimum period of seven years after placing the last unit of the model on the market: motor; circulation and drain pump; heaters and heating elements, including heat pumps (separately or bundled); piping and related equipment including all hoses, valves, filters and aquastops; structural and interior parts related to door assemblies (separately or bundled); printed circuit boards; electronic displays; pressure switches; thermostats and sensors; software and firmware including reset software;
(b) the manufacturers, importers or authorised representatives of household dishwashers shall make available to professional repairers and end-users at least the following spare parts: door hinge and seals, other seals, spray arms, drain filters, interior racks and plastic peripherals such as baskets and lids, for a minimum period of 10 years after placing the last unit of the model on the market; (c) the manufacturers, importers or authorised representatives of household dishwashers shall ensure that the spare parts mentioned in points (a) and (b) can be replaced with the use of commonly available tools and without permanent damage to the appliance; (d) the list of spare parts concerned by point (a) and the procedure for ordering them shall be publicly available on the free access website of the manufacturer, importer or authorised representative, at the latest two years after the placing on the market of the first unit of a model and until the end of the period of availability of these spare parts; (e) the list of spare parts concerned by point (b) and the procedure for ordering them and the repair instructions shall be publicly available on the free access website of the manufacturer, importer or authorised representative, when placing the first unit of a model on the market and until the end of the period of availability of these spare parts;
(2) maximum delivery time of spare parts: (a) during the period mentioned under point (1), the manufacturer, importer or authorised representative shall ensure the delivery of the spare parts within 15 working days after having received the order; (b) in the case of spare parts concerned by point (1)(a), the availability of spare parts may be limited to professional repairers registered in accordance with point (3)(a) and (b);
(3) access to Repair and Maintenance Information: after a period of two years after the placing on the market of the first unit of a model, and until the end of the period mentioned under (1), the manufacturer, importer or authorised representative shall provide access to the appliance repair and maintenance information to professional repairers in the following conditions: (a) the manufacturer’s, importer’s or authorised representative’s website shall indicate the process for professional repairers to register for access to information; to accept such a request, the manufacturers, importers or authorised representatives may require the professional repairer to demonstrate that: (i) the professional repairer has the technical competence to repair household dishwashers and complies with the applicable regulations for repairers of electrical equipment in the Member States where it operates. Reference to an official registration system as professional repairer, where such system exists in the Member States concerned, shall be accepted as proof of compliance with this point; (ii) the professional repairer is covered by insurance covering liabilities resulting from its activity regardless of whether this is required by the Member State;
(b) the manufacturers, importers or authorised representatives shall accept or refuse the registration within 5 working days from the date of the request; (c) the manufacturers, importers or authorised representatives may charge reasonable and proportionate fees for access to the repair and maintenance information or for receiving regular updates. A fee is reasonable if it does not discourage access by failing to take into account the extent to which the professional repairer uses the information;
once registered, a professional repairer shall have access, within one working day after requesting it, to the requested repair and maintenance information. The information may be provided for an equivalent model or model of the same family, if relevant; the available repair and maintenance information shall include: the unequivocal appliance identification; a disassembly map or exploded view; list of necessary repair and test equipment; component and diagnosis information (such as minimum and maximum theoretical values for measurements); wiring and connection diagrams; diagnostic fault and error codes (including manufacturer-specific codes, where applicable); instructions for installation of relevant software and firmware including reset software; and information on how to access data records of reported failure incidents stored on the household dishwasher (where applicable);
(4) information requirements for refrigerant gases: without prejudice to Regulation (EU) No 517/2014 of the European Parliament and of the Council Regulation (EU) No 517/2014 of the European Parliament and of the Council of 16 April 2014 on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006 (OJ L 150, 20.5.2014, p. 195 ).(5) requirements for dismantling for material recovery and recycling while avoiding pollution: manufacturers, importers or authorised representatives shall ensure that household dishwashers are designed in such a way that the materials and components referred to in Annex VII to Directive 2012/19/EU can be removed with the use of commonly available tools, manufacturers, importers or authorised representatives shall fulfil the obligations laid down in Article 15, Point 1 of Directive 2012/19/EU.
(1) information that the eco programme is suitable to clean normally soiled tableware, that for this use, it is the most efficient programme in terms of its combined energy and water consumption, and that it is used to assess compliance with the EU ecodesign legislation; (2) information that loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings and information on correct loading of tableware and main consequences of incorrect loading; (3) information that manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended; (4) information that washing tableware in a household dishwasher usually consumes less energy and water in the use phase than hand dishwashing when the household dishwasher is used according to the manufacturer’s instructions; (5) values on the programme duration, energy and water consumption for all programmes that offer a cycle; (6) information that the values given for programmes other than the eco programme are indicative only; and, (7) instruction on how to find the model information stored in the product database, as set out in Regulation (EU) 2019/2017 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product.
(8) correct installation (including level positioning, connection to mains, connection to water inlets, cold and/or hot if appropriate); (9) correct use of detergent, salt and other additives, and main consequences of incorrect dosage; (10) foreign object removal from the household dishwasher; (11) periodic cleaning, including optimal frequency and limescale prevention, and procedure; (12) periodic checks of filters, including optimal frequency, and procedure; (13) identification of errors, the meaning of the errors, and the action required, including identification of errors requiring professional assistance; (14) how to access professional repair (internet webpages, addresses, contact details).
(15) any implications of self-repair or non-professional repair for the safety of the end-user and for the guarantee; (16) the minimum period during which spare parts for the household dishwasher are available.
(a) The EEI is calculated as follows and rounded to one decimal place: EEI = (EPEC/SPEC) × 100 where: EPEC is the eco programme energy consumption of the household dishwasher measured in kWh/cycle and rounded to three decimal places; SPEC is the standard programme energy consumption of the household dishwasher. (b) The SPEC is calculated in kWh/cycle and rounded to three decimal places as follows: (i) for household dishwashers with rated capacity ps ≥ 10 and width > 50 cm: SPEC = 0,025 × ps +1,350 (ii) for household dishwashers with rated capacity ps ≤ 9 or width ≤ 50 cm: SPEC = 0,090 × ps +0,450 where ps is the number of place settings.
(1) the Member State authorities shall verify one single unit of the model; (2) the model shall be considered to comply with the applicable requirements if: (a) the values given in the technical documentation pursuant to point (2) of Annex IV to Directive 2009/125/EC (declared values), and, where applicable, the values used to calculate these values, are not more favourable for the manufacturer, importer or authorised representative than the results of the corresponding measurements carried out pursuant to paragraph (g) thereof; and (b) the declared values meet any requirements laid down in this Regulation, and any required product information published by the manufacturer, importer or authorised representative does not contain values that are more favourable for the manufacturer, importer or authorised representative than the declared values; and (c) when the Member States authorities check the unit of the model, they find that the manufacturer, importer or authorised representative has put in place a system that complies with the requirements in the second paragraph of Article 6; and (d) when the Member States authorities check the unit of the model, it complies with the requirements in the third paragraph of Article 6, the programme requirements in point 1, resource efficiency requirements in point 5 and information requirements in point 6 of Annex II; and (e) when the Member State authorities test the unit of the model, the determined values (the values of the relevant parameters as measured in testing and the values calculated from these measurements) comply with the respective verification tolerances as given in Table 1;
(3) if the results referred to in point (2)(a), (b), (c) or (d) are not achieved, the model and all equivalent models shall be considered not to comply with this Regulation; (4) if the result referred to in point (2)(e) is not achieved, the Member State authorities shall select three additional units of the same model for testing. As an alternative, the three additional units selected may be of one or more equivalent models; (5) the model shall be considered to comply with the applicable requirements if, for these three units, the arithmetical mean of the determined values complies with the respective verification tolerances given in Table 1; (6) if the result referred to in point (5) is not achieved, the model and all equivalent models shall be considered not to comply with this Regulation; (7) The Member State authorities shall provide all relevant information to the authorities of the other Member States and to the Commission without delay after a decision being taken on the non-compliance of the model according to points 3, 6 or the second paragraph of this Annex.
| Parameter | Verification tolerances |
|---|---|
| Eco programme energy consumption (EPEC) | The determined value |
| Eco programme water consumption (EPWC) | The determined value |
| Cleaning performance index (I | The determined value |
| Drying performance index (I | The determined value |
| Programme duration (T | The determined value |
| Power consumption in off mode (P | The determined value |
| Power consumption in standby mode (P | The determined value |
| Power consumption in delay start (P | The determined value |
(1) household dishwashers with 14 place settings (without heat pump technology): (a) energy consumption: 0,67 kWh/cycle;(b) water consumption: 9,9 L/cycle;(c) airborne acoustic noise emissions: 44 dB(A); (d) programme duration: 222 minutes (3 hours and 42 minutes);
(2) household dishwashers with 13 place settings (with heat pump technology): (a) energy consumption: 0,55 kWh/cycle;(b) water consumption: 8,8 L/cycle;(c) airborne acoustic noise emissions: 46 dB(A); (d) programme duration: 295 minutes (4 hours and 55 minutes);
(3) household dishwashers with 10 place settings: (a) energy consumption: 0,66 kWh/cycle;(b) water consumption: 9,5 L/cycle;(c) airborne acoustic noise emissions: 44 dB(A); (d) programme duration: 195 minutes (3 hours and 15 minutes);
(4) household dishwashers with 6 place settings: (a) energy consumption: 0,62 kWh/cycle;(b) water consumption: 8,0 L/cycle;(c) airborne acoustic noise emissions: 48 dB(A); (d) programme duration: 225 minutes (3 hours and 45 minutes).
(1) standby mode: 0,20 W;(2) networked standby condition: Ethernet 0,60 W, Wi-Fi0,70 W.
Loading ...