Commission Implementing Regulation (EU) 2019/66 of 16 January 2019 on rules on uniform practical arrangements for the performance of official controls on plants, plant products and other objects in order to verify compliance with Union rules on protective measures against pests of plants applicable to those goods
Modified by
  • Commission Implementing Regulation (EU) 2020/887of 26 June 2020amending Implementing Regulation (EU) 2019/66 as regards post-import checks of plants for planting, 32020R0887, June 29, 2020
  • Commission Implementing Regulation (EU) 2021/1865of 22 October 2021correcting the French language version of Implementing Regulation (EU) 2019/66 on rules on uniform practical arrangements for the performance of official controls on plants, plant products and other objects in order to verify compliance with Union rules on protective measures against pests of plants applicable to those goods, 32021R1865, October 25, 2021
Commission Implementing Regulation (EU) 2019/66of 16 January 2019on rules on uniform practical arrangements for the performance of official controls on plants, plant products and other objects in order to verify compliance with Union rules on protective measures against pests of plants applicable to those goods
Article 11.Competent authorities shall perform official controls at least once per year in the premises and, where applicable, in other locations used by professional operators authorised to issue plant passports in accordance with Article 84(1) of Regulation (EU) 2016/2031.2.Those controls shall include inspections and, in the case of suspicion of risks to plant health, the sampling and testing referred to in Article 92(1) of Regulation (EU) 2016/2031.3.Those controls shall be carried out at the most appropriate time with regard to the possibility of detecting the presence of relevant pests or signs or symptoms thereof.4.In addition to the controls referred to in paragraphs 1 to 3, the competent authorities shall carry out physical checks on plants for planting other than seeds, including tubers, bulbs and rhizomes, that have been introduced into the Union at a dormant stage. The competent authorities shall carry out those checks during the first growing season after import on certain of those plants identified on the basis of the control plan referred to in paragraph 5.5.The competent authorities shall determine the frequencies of the checks mentioned in paragraph 4, on the basis of a control plan, which shall be established in accordance with at least all of the following criteria:(a)the history and the level of Union quarantine pests intercepted and notified by the Member States in accordance with Article 11(c) of Regulation (EU) 2016/2031, found present on imported plants, plant products and other objects;(b)the occurrence of a priority pest, within the meaning of Article 6 of Regulation (EU) 2016/2031, in the relevant third country of origin, according to the available technical and scientific information;(c)information made available via the Information Management System for Official Controls (IMSOC) or any other official warning;(d)the biology of the host and the pests, and other relevant conditions for the efficient detection of a quarantine pest or a pest subject to the measures adopted pursuant to Article 30(1) of Regulation (EU) 2016/2031.6.When those checks mentioned in paragraph 4 demonstrate the presence of a quarantine pest or a pest subject to the measures adopted pursuant to Article 30(1) of Regulation (EU) 2016/2031, competent authorities shall record the results of the checks in IMSOC into the corresponding finalised Common Health Entry Document (CHED) as referred to in Article 56 of Regulation (EU) 2017/625, whenever it is possible to trace back the infested plant to the imported consignment.
Article 2Increase of frequency of official controls on professional operators authorised to issue plant passportsCompetent authorities may increase the frequency of the official controls referred to in Article 1, if the risk so requires, taking into account at least the following elements:(a)increased phytosanitary risks for the specific family, genera or species of the plants or plant products produced in those premises and, where applicable, in other locations, where more than one control is necessary due to the pest biology or the environmental conditions;(b)phytosanitary risks linked to the origin or provenance within the Union of particular plants, plant products or other objects;(c)number of production cycles in a year;(d)history of compliance of the professional operator with the applicable provisions of Regulations (EU) 2016/2031 and (EU) 2017/625;(e)available infrastructure and where the premises and, where applicable, where other locations used by the professional operator are situated.
Article 3Reduction of frequency of official controls on professional operators authorised to issue plant passportsCompetent authorities may reduce the frequency of the official controls referred to in Article 1 to at least once every two years, if the risk so allows and the following conditions are fulfilled:(a)the professional operator has implemented for at least two consecutive years a pest risk management plan in accordance with Article 91 of Regulation (EU) 2016/2031;(b)the competent authority has concluded that that plan has been effective in reducing relevant phytosanitary risks and that the professional operator concerned has complied with the applicable provisions of Regulations (EU) 2016/2031 and (EU) 2017/625.
Article 4Uniform minimum frequency of official controls on plants, plant products and other objects of a particular origin or provenance within the Union1.A premise and, where applicable, other locations used by professional operators authorised to issue plant passports in accordance with Article 84(1) of Regulation (EU) 2016/2031 shall be subject to at least one official control in addition to the one referred to in Article 1 if they are the place of origin of plants, plant products and other objects as defined in points (1), (2) and (5) of Article 2 of Regulation (EU) 2016/2031, which have been grown at least part of their life or have been located in a demarcated area established in accordance with Article 18(1) of that Regulation, and which can be expected to be infested by the pest for which that demarcated area had been established. That additional official control shall be carried out as close as possible to the point in time when those plants, plant products and other objects are moved out of that demarcated area or from the infested zone to the buffer zone of that demarcated area.2.When carrying out the official controls referred to in paragraph 1, the competent authorities shall assess the following elements:(a)the risk that the plants, plant products and other objects carry the relevant pest;(b)the risk of the presence of potential vectors of that pest, taking into account the origin or provenance within the Union of the consignments, the degree of susceptibility of the plants to infestation and the compliance by the professional operator responsible for the movement with any other measure taken to eradicate or contain that pest.
Article 5Uniform minimum frequency of official controls on the plants referred to in the first paragraph of Article 73 of Regulation (EU) 2016/2031Identity checks and physical checks on the plants which are referred to in the first paragraph of Article 73 of Regulation (EU) 2016/2031 and enter the Union shall be carried out on at least 1 % of consignments of those plants.
Article 6Uniform frequency of official controls on professional operators authorised to apply the mark on wood packaging materialCompetent authorities shall perform official controls at least once per year in the premises and, where applicable, in other locations used by professional operators authorised to apply the mark on wood packaging material referred to in Article 98(1) of Regulation (EU) 2016/2031.Those controls shall include the supervision referred to in Article 98(3) of Regulation (EU) 2016/2031.
Article 7Increase of frequency of official controls on professional operators authorised to apply the mark on wood packaging materialCompetent authorities may increase the frequency of the official controls referred to in Article 6, if the risk so requires, taking into account one or more of the following elements:(a)increased phytosanitary risks linked to the presence of the pests in the Union territory;(b)wood packaging material, other plants, plant products or other objects having been subject to interceptions of pests;(c)history of compliance of the professional operator with the applicable provisions of Regulations (EU) 2016/2031 and (EU) 2017/625;(d)available infrastructure and where the premises and, where applicable, where other locations used by the professional operator are situated.
Article 8Entry into force and applicationThis Regulation shall enter into force the twentieth day following that of its publication in the Official Journal of the European Union.It shall apply from 14 December 2019.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Article 11.Competent authorities shall perform official controls at least once per year in the premises and, where applicable, in other locations used by professional operators authorised to issue plant passports in accordance with Article 84(1) of Regulation (EU) 2016/2031.2.Those controls shall include inspections and, in the case of suspicion of risks to plant health, the sampling and testing referred to in Article 92(1) of Regulation (EU) 2016/2031.3.Those controls shall be carried out at the most appropriate time with regard to the possibility of detecting the presence of relevant pests or signs or symptoms thereof.4.In addition to the controls referred to in paragraphs 1 to 3, the competent authorities shall carry out physical checks on plants for planting other than seeds, including tubers, bulbs and rhizomes, that have been introduced into the Union at a dormant stage. The competent authorities shall carry out those checks during the first growing season after import on certain of those plants identified on the basis of the control plan referred to in paragraph 5.5.The competent authorities shall determine the frequencies of the checks mentioned in paragraph 4, on the basis of a control plan, which shall be established in accordance with at least all of the following criteria:(a)the history and the level of Union quarantine pests intercepted and notified by the Member States in accordance with Article 11(c) of Regulation (EU) 2016/2031, found present on imported plants, plant products and other objects;(b)the occurrence of a priority pest, within the meaning of Article 6 of Regulation (EU) 2016/2031, in the relevant third country of origin, according to the available technical and scientific information;(c)information made available via the Information Management System for Official Controls (IMSOC) or any other official warning;(d)the biology of the host and the pests, and other relevant conditions for the efficient detection of a quarantine pest or a pest subject to the measures adopted pursuant to Article 30(1) of Regulation (EU) 2016/2031.6.When those checks mentioned in paragraph 4 demonstrate the presence of a quarantine pest or a pest subject to the measures adopted pursuant to Article 30(1) of Regulation (EU) 2016/2031, competent authorities shall record the results of the checks in IMSOC into the corresponding finalised Common Health Entry Document (CHED) as referred to in Article 56 of Regulation (EU) 2017/625, whenever it is possible to trace back the infested plant to the imported consignment.
Article 2Increase of frequency of official controls on professional operators authorised to issue plant passportsCompetent authorities may increase the frequency of the official controls referred to in Article 1, if the risk so requires, taking into account at least the following elements:(a)increased phytosanitary risks for the specific family, genera or species of the plants or plant products produced in those premises and, where applicable, in other locations, where more than one control is necessary due to the pest biology or the environmental conditions;(b)phytosanitary risks linked to the origin or provenance within the Union of particular plants, plant products or other objects;(c)number of production cycles in a year;(d)history of compliance of the professional operator with the applicable provisions of Regulations (EU) 2016/2031 and (EU) 2017/625;(e)available infrastructure and where the premises and, where applicable, where other locations used by the professional operator are situated.
Article 3Reduction of frequency of official controls on professional operators authorised to issue plant passportsCompetent authorities may reduce the frequency of the official controls referred to in Article 1 to at least once every two years, if the risk so allows and the following conditions are fulfilled:(a)the professional operator has implemented for at least two consecutive years a pest risk management plan in accordance with Article 91 of Regulation (EU) 2016/2031;(b)the competent authority has concluded that that plan has been effective in reducing relevant phytosanitary risks and that the professional operator concerned has complied with the applicable provisions of Regulations (EU) 2016/2031 and (EU) 2017/625.
Article 4Uniform minimum frequency of official controls on plants, plant products and other objects of a particular origin or provenance within the Union1.A premise and, where applicable, other locations used by professional operators authorised to issue plant passports in accordance with Article 84(1) of Regulation (EU) 2016/2031 shall be subject to at least one official control in addition to the one referred to in Article 1 if they are the place of origin of plants, plant products and other objects as defined in points (1), (2) and (5) of Article 2 of Regulation (EU) 2016/2031, which have been grown at least part of their life or have been located in a demarcated area established in accordance with Article 18(1) of that Regulation, and which can be expected to be infested by the pest for which that demarcated area had been established. That additional official control shall be carried out as close as possible to the point in time when those plants, plant products and other objects are moved out of that demarcated area or from the infested zone to the buffer zone of that demarcated area.2.When carrying out the official controls referred to in paragraph 1, the competent authorities shall assess the following elements:(a)the risk that the plants, plant products and other objects carry the relevant pest;(b)the risk of the presence of potential vectors of that pest, taking into account the origin or provenance within the Union of the consignments, the degree of susceptibility of the plants to infestation and the compliance by the professional operator responsible for the movement with any other measure taken to eradicate or contain that pest.
Article 5Uniform minimum frequency of official controls on the plants referred to in the first paragraph of Article 73 of Regulation (EU) 2016/2031Identity checks and physical checks on the plants which are referred to in the first paragraph of Article 73 of Regulation (EU) 2016/2031 and enter the Union shall be carried out on at least 1 % of consignments of those plants.
Article 6Uniform frequency of official controls on professional operators authorised to apply the mark on wood packaging materialCompetent authorities shall perform official controls at least once per year in the premises and, where applicable, in other locations used by professional operators authorised to apply the mark on wood packaging material referred to in Article 98(1) of Regulation (EU) 2016/2031.Those controls shall include the supervision referred to in Article 98(3) of Regulation (EU) 2016/2031.
Article 7Increase of frequency of official controls on professional operators authorised to apply the mark on wood packaging materialCompetent authorities may increase the frequency of the official controls referred to in Article 6, if the risk so requires, taking into account one or more of the following elements:(a)increased phytosanitary risks linked to the presence of the pests in the Union territory;(b)wood packaging material, other plants, plant products or other objects having been subject to interceptions of pests;(c)history of compliance of the professional operator with the applicable provisions of Regulations (EU) 2016/2031 and (EU) 2017/625;(d)available infrastructure and where the premises and, where applicable, where other locations used by the professional operator are situated.
Article 8Entry into force and applicationThis Regulation shall enter into force the twentieth day following that of its publication in the Official Journal of the European Union.It shall apply from 14 December 2019.
This Regulation shall be binding in its entirety and directly applicable in all Member States.